| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C07002-1 | ADAPTER - WING | 29 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 101-00802 | Barfield 101-00802 Fuel Quantity Adapter Cable, For Fixed Wing Aircraft | 9 | |
| 101-00831 | Barfield 101-00831 Fuel Quantity Adapter Cable, For Fixed Wing Aircraft | 6 | |
| 17ME65B00713-1 | ADAPTER - NOSE COWL HANDLING, ON-WING MAINTENANCE. JT9D ENGINE | 1 | |
| 19MIT65B01211-1 | TORQUE ADAPTER - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 20MIT65B01211-1 | ADAPTER WRENCH - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 2C91002 | ADAPTER, ON-WING MAINTENANCE | 1 | |
| 2C91002G01 | ADAPTER - ON WING MX | 1 | |
| 2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | 1 | |
| 30MIT65B00112 | ADAPTER ASSEMBLY - JACKING, OUTBOARD WING BBL 932.6 | 10 | |
| 33410FFAB125-4 | Barfield 33410FFAB125-4 Static Test Adapter, For Fixed Wing Aircraft | 8 | |
| 3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
| 4507100101-003 | ADAPTER ASSY, JACK-WING | 2 | |
| 4507100101-005 | Wing Jack Adapter with Tie-Down | 6 | |
| 4507100101-007 | ADAPTER ASSY, JACK-WING | 4 | |
| 4916702-501 | Adapter assy-jack，wing | 10 | |
| 4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
| 4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| 550T05658-401 | ADAPTER, JACKING-WING | 1 | |
| 550T05658-401 | ADAPTER,JACKING-WING | 1 | |
| 57ME65B00713 | ADAPTER - NOSE COWL HANDLING, ON WING MAINTENANCE, JT9D ENGINE | 1 | |
| 58306 | 58306;Cable PSD40-502-3 Adapter Wing TankS | 1 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 3 | |
| 5TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, CENTER WING TANK | 1 | |
| 60MIT65B00112 | JACKING ADAPTER ASSEMBLY - OUTBOARD WING WBL 938.8 | 1 | |
| 6795875 | ADAPTER - VIEWING | 1 | |
| 6MIT65B01201-1 | WRENCH ADAPTER - NUT, LOWER DRAG BRACE, WING LANDING GEAR | 3 | |
| 90MIT65B00112 | ADAPTER ASSEMBLY - JACKING INBOARD WING, BBL 566.5 | 2 | |
| 91-6739 | ADAPTER,JACKING-WING | 11 | |
| 97A28002063000 | BLANK ADAPTER-WING CENTER BOX VENTILATION.SYSTEM | 1 | |
| 97A28002156000 | ADAPTER ASSEMBLY-WING CENTER BOX | 1 | |
| 98A27508061000 | ADAPTER-FLAP DRIVE SHAFT,WING | 1 | |
| 98A27508062000 | ADAPTER - FLAP DRIVE SHAFT LH-RH WING | 3 | |
| 98S07003000001 | ADAPTER-JACK,WING § AFT FUSELAGE | 16 | |
| 98V07104003000 | ADAPTER-WING JACKING | 6 | |
| 99127-231 | A320 ON-WING ADAPTER (CTL) | 2 | |
| A07003-1 | JACK ADAPTER - OUTBOARD WING | 14 | |
| A12005-1 | LUBRICATION ADAPTER - ATTACH FITTING, WING/NACELLE | 11 | |
| A26001-131 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-134 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-135 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 7 | |
| A26001-136 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-137 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-138 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-139 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-144 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-145 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-148 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-175 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-176 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-192 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-24 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-4 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 1 | |
| A26001-5 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 2 | |
| AGE-00602-001 | ADAPTER - TORQUE, WING/FUSELAGE BOLT | 3 | |
| AGE-04540-401 | ADAPTER - FUEL LEAK-AGE TEST, WING | 1 | |
| AGE-04540-403 | ADAPTER - FUEL LEAK-AGE TEST, WING | 1 | |
| AP-BEE530-3 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
| AP208 | ADAPTER, UNDERWING - FUEL TANK VENT | 1 | |
| AT120D/FF-IV84 | Direct Viewing , 120 degree field of view Tip Adapter.Depth of field 25-Infiniy mm | 2 | |
| AT120S/FF-IV84 | Side Viewing , 120 degree field of view Tip Adapter Depth of field 6 - Infiniy mm | 2 | |
| AT120S/NF-IV84 | Side Viewing , 120 degree field of view Tip Adapter, Depth of field 1 - 20 mm | 2 | |
| B25002 | FUNCTIONAL TEST EQUIPMENT -0 ADAPTER, OFF WING | 1 | |
| B25002-37 | FUNCTIONAL TEST EQUIPMENT - ADAPTER, OFF WING ESCAPE SLIDE | 4 | |
| C07002-1 | Adapter-Jack,Fitting,WingJackingPoints | 29 | |
| C28001-1 | Adapter -Sump Drain. Center Wing Tank | 5 | |
| C28003-1 | Adapter -Sump Pump. Center Wing Tank | 6 | |
| C52007-1 | Torque Wrench Adapter Equipment - Automatic Overwing Exit Hatch | 12 | |
| CP30248 | ADAPTER - LEFT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30249 | ADAPTER - CENTER (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30250 | ADAPTER - RIGHT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| DZZ7320-1 | Adapter，jacking-wing tip | 1 | |
| F80060-6 | ADAPTER - AIRCRAFT JACKING (WING) - 737-100/200/30 | 25 | |
| FJC01-35-13000 | SUPPORT-ADAPTER OUTER (OUTER WING ADAPTER) | 1 | |
| G07005-1 | JACK ADAPTER-INBOARD WING | 5 | |
| G07006-1 | JACK ADAPTER-OUTBOARD WING | 2 | |
| G32011 | WRENCH ADAPTER -0 OVERSIZE GLAND NUT, WING, AND | 1 | |
| G32011-1 | WRENCH ADAPTER - OVERSIZE GLAND NUT, WING AND BODY GEAR | 6 | |
| G32037 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 1 | |
| GG0570003-003 | PADS-JACKING, ADAPTER ASSY WING/FUSE | 1 | |
| GS18283-1 | TRI-WING ADAPTER | 6 | |
| GSB0700017 | ADAPTER - JACK, WING | 2 | |
| GSE017 | ADAPTER,JACKING-WING | 1 | |
| GSE148 | ADAPTER - TORQUE, WING | 1 | |
| HSE757-0010-7 | SLING WINGLET - ADAPTER PLUG HOIST | 2 | |
| I-580-90 | ADAPTER-90 ANGLE VIEWING_[I-580-90] | 1 | |
| J28007-10 | Adapter Assembly - Pressurization Equipment - Wing Dry Bay, Fuel Leak Detection | 1 | |
| J28017-1 | ADAPTER EQUIPMENT - DRY BAY PRESSURIZATION, WING | 6 | |
| MIT65B01201 | WRENCH ADAPTER - GLAND NUT, WING AND BODY GEAR | 7 | |
| MIT65B01218 | TORQUE ADAPTER - DRAG BRACE ASSEMBLY, WING LANDING GEAR | 6 | |
| MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B82568 | ADAPTER - PRESSURE RELIEF VALVE, RETRACT ACTUATOR, WING LANDING GEAR | 3 | |
| MS4001672-1 | PRESSURE CHUCK ADAPTER OFF WING SLIDE PN 60592-SERIES | 1 | |
| N2966400 | SIDE VIEWING , 120 DEGREE FIELD OF VIEW TIP ADAPTER DEPTH OF FIELD 6 - INFINIY MM | 1 | |
| P75701-3 | Barfield P75701-3 Static Test Adapter, For Boeing, Cirrus Hawker and Fixed Wing Aircraft | 10 | |
| R-1988 | ADAPTER-JACK, WING | 13 | |
| R1988 | ADAPTER - JACK, WING | 13 | |
| S51089-4 | Barfield S51089-4 Pitot Static Test Adapter, For Fixed Wing Aircraft | 3 | |
| ST2580-263 | ADAPTER - TORQUE, WING LANDING GEAR RETRACT ACTUATOR SPACER NUT SPL-5286 | 8 | |
| ST2580-267 | Wrench - Spanner, Adapter For BACN10RF Nuts. (See ST2580-267 Drawing For Correct Dash Number) | 15 | |
| ST2580-267-XX-X-X | SPANNER WRENCH ADAPTER FOR BACN10RF NUTS. (ST2580-267 DRAWING) | 1 | |
| TE65B00776 | HARNESS ASSEMBLY - FUEL QUANTITY INDICATOR, CALIBRATION ADAPTER, NUMBER 2 AND NUMBER 3 MAIN AND CENTER WING TANK | 1 | |
| TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE65B00776-1 -51 -101 | Harness -Calibration Adapter. Fuel Quantity Indicator 2. 3. Main & Center Wing Tank | 1 | |
| TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 2 | |
| TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TS1176/D917 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
