| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 6796696 | ADAPTER - STAND | 1 | |
| PWC40430 | ADAPTER - STAND | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11C3301 | STAND - ADAPTER-ASSY/DISSY HP COMPR HALF-CASE FWD | 1 | |
| 11C3301G01 | STAND, ADAPTER-A/D HPC CASE HALF FWD | 1 | |
| 11C4613 | ADAPTER - ROLL AROUND STAND | 1 | |
| 11C4614 | ADAPTER - SHIPPING STAND TO JACKING LEGS | 1 | |
| 12AA221 | 8MM ADAPTER FOR MAGNETIC STAND (FOR MITUTOYO SURFTEST SJ-210 SURFACE ROUGHNESS TESTER CODE: 178-560-01D S/N: 614031811) | 1 | |
| 1C9449 | ADAPTERS, TEST STAND-FLOW FUEL NOZZLE | 1 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| 294863-2 | MAINTENANCE STAND ADAPTER KIT HOLDS ENGINE ASSEMBLY IN 287750-1 MAINTENANCE STAND | 1 | |
| 2C81017G01 | BUILD-UP STAND ADAPTER | 1 | |
| 2C91000G01 | STAND - ADAPTER | 1 | |
| 409 6620-239 | CF34-8 ENGINE STAND REAR ADAPTER. | 1 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| 6796644 | ADAPTER, STAND-TURBINE UNIT | 2 | |
| 6796692 | ADAPTER - STAND, REDUCTION GEAR | 2 | |
| 6796693 | ADAPTER - STAND, REDUCTION GEAR REAR CASE | 2 | |
| 6796694 | ADAPTER - STAND, ACCESSORY DRIVE HOUSING ASSEMBLY | 2 | |
| 6796697 | ADAPTER - STAND, COMPRESSOR SECTION | 2 | |
| 6796818 | ADAPTER – STAND, TURBINE UNIT 600 SERIES - | 1 | |
| 6796965 | ADAPTER - ATTACHING, COMPRESSOR UNIT TO STAND | 2 | |
| 6797355 | ADAPTER-STAND, TURBINE UNIT | 1 | |
| 6798316 | ADAPTER - TURNOVER STAND | 2 | |
| 6799523 | ADAPTER - TRUNION, TURBINE ROTOR STAND | 2 | |
| 23051212 | Adapter-Stand | 1 | |
| 856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS SUPPORT RING | 1 | |
| 856A1836G01 | ADAPTERS, MAINTENANCE STAND-TO-FORWARD FAN STATOR SUPPORT RING | 10 | |
| 8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | 1 | |
| 8C3483 | STAND - TROLLEY - AGBX - ADAPTERS | 1 | |
| 9400M86G01 | ADAPTERS, TEST STAND - FLOW FUEL NOZZLE | 1 | |
| 9400M96 | ADAPTERS & SONIC NOZZLES - TEST STAND FLOW - FUEL NOZZLE | 1 | |
| 9400M96G01 | ADAPTERS, TEST STAND - FLOW FUEL NOZZLE | 1 | |
| 9481M78 | ADAPTER - BRACKET-STANDARD ROLLOVER STAND | 1 | |
| 956A1202 | ADAPTER - ROLL OVER STAND - CDN | 1 | |
| 956A1245 | ADAPTER - STRONGBACK - CORE BUILD STAND | 1 | |
| 956A1283 | ADAPTER, ROLL OVER STAND - CDN | 1 | |
| 956A3202 | ADAPTER - ROLLOVER STAND - CDN | 1 | |
| 98L34203500000 | ADAPTER,COVER STATIC PROBE-STAND BY | 1 | |
| 98L55308525000 | ADAPTER, SUPPORT STAND - RUDDER | 1 | |
| 9C1204 | ADAPTER - JACK STAND-IDG | 1 | |
| 9C1204801 | ADAPTER - JACKSTAND, 8E90 108 | 1 | |
| 9C1204G01 | ADAPTER-JACKSTAND | 7 | |
| A24011-1 | JACK-ADAPTER IDG TO USE TOGETHER WITH 9C1204G01 ( ADAPTER JACK STAND IDG) ON 9C1132G05- JACK STAND IDG | 13 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 7 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| AGE-04134-401 | ADAPTERS-STAND | 9 | |
| AM-2811-603 | ENGINE STAND - ADAPTERS | 1 | |
| AM-2811-608 | ENGINE STAND - ADAPTERS | 1 | |
| C29005-1 | Adapter - Tee, Standby Hydraulic System Test | 6 | |
| F70249 | APU ADAPTER STAND AND TRANS. CART THE F70249-1 | 1 | |
| F72946-1 | DOLLY, WORK STAND,& ADAPTER-THRUST RVRSR TO | 1 | |
| F72946-2 | Dolly. Work Stand And Adapter -Thrust Reverser | 1 | |
| F72950-128 | APU Adapter Stand - Model 737 | 1 | |
| FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | 1 | |
| FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
| GNSSRK | REPEATER KIT; INCLUDES GA30-V AMPLIFIER MODULE, S440 GNSS ANTENNA, N-JK-G ARRESTER, GRA10-NF INDOOR ANTENNA, LMR/KSR240 L=20MTR (NM-NM) INDOOR CABLE SET, RG8 L=30MTR (NM-TM) OUTDOOR CABLE SET, OUTDOOR ANTENNA MOUNTING STAND AND POWER ADAPTER MANUFACTURER: | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| HU-5 | ENGINE STAND ADAPTER - RB211 | 1 | |
| HU55338-1 | ADAPTER - FAN & NOSE COWL STAND | 1 | |
| HU55676 | ADAPTER - ENGINE BUILD STAND, INTERMEDIATE CASE (STARBOARD SIDE) | 4 | |
| HU55677 | ADAPTER - ENGINE BUILD STAND, INTERMEDIATE CASE (PORT SIDE) | 4 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| K-1795 | TFE 731 -2 THRU -5 ENGINE STAND ADAPTER KIT | 1 | |
| K-2115 | ADAPTER (PT6A - PT6A-28), USE WITH 08-2001-0000 STAND (TRONAIR) | 7 | |
| K-2116 | ADAPTER (PT6A-41 - PT6A-65), USE WITH 08-2001-0000 STAND | 6 | |
| K-2685 | PW530a Engine Stand Adapter (CE) - Citation Aircraft | 4 | |
| K-2769 | PW-545a Adapter Kit for Engine Work Stand | 4 | |
| K24005-94 | HOIST ADAPTER - VFSG, RR ENGINE STAND | 8 | |
| K29004-1 | ADAPTER - RESERVOIR STANDPIPE OPERATIONAL TEST | 2 | |
| K29004-17 | ADAPTER - RESERVOIR STANDPIPE OPERATIONAL TEST | 7 | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 2 | |
| PS22203M-3-4 | ADAPTER: STATIC,PITOT,STANDBY - Dash 8-400 / Q400 | 5 | |
| PWA 80577 | ADAPTER-STAND | 1 | |
| PWA106473 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA107715 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA25207 | ADAPTER, CONNECTING - AGB TO STAND_[PWA25207] | 1 | |
| PWA25278 | ADAPTER, CONNECTING - G/B TO STAND_[PWA25278] | 2 | |
| PWA25361 | ADAPTER - DIFFUSER CASE TO STAND_[PWA25361] | 1 | |
| PWA29388 | ADAPTER - HPC REAR HUB TO STAND_[PWA29388] | 2 | |
| PWC62756 | ADAPTER-STAND | 1 | |
| PWC70792 | ADAPTER - ENGINE STAND | 6 | |
| PWC85973 | ADAPTER RING - BUILD STAND | 1 | |
| RRT089154 | LIFT ADAPTER - BASIC STAND | 1 | |
| ST2575A | Standard Tool - Torque Adapter | 5 | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 9 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 13 | |
| ST2580-267-24-4-7 | STANDARD TOOL-SPANNER WRENCH ADAPTER FOR BACN10RF-NUTS | 1 | |
| STD-7111 | ADAPTER - HEX WRENCH, 0.25-INCH HEX TO 0.375IN SQUARE DRIVE, STANDARD | 1 | |
| SWE13832-11 | ENGINE STAND - ENGINE ADAPTER | 1 | |
| ZP-FMA-0000 | ZP-FMA-0000;Standard Housing for Fiber Adapters | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
