| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 6796978 | ADAPTER - RING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 07-401B | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-498A | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) (Shank size: .498" Shank) (Accepts: .498" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Ad | 1 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 1.325.010 | UAS - WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 1.325.053 | UAS - WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 1.325.066 | UAS - WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 1.325.112 | UAS - WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 1.325.117 | UAS - WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 1.325.177 | UAS - WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 1.325.239 | UAS - WHEEL ADAPTER RING FOR B787 NLG | 1 | |
| 1.325.275 | UAS - WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 10C1138 | ADAPTER - MOTORING/LOCKING CORE ENGINE | 1 | |
| 10C1138G03 | ADAPTER, MOTORING/LOCKING-CORE ENGINE | 1 | |
| 114-1077 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 4 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11MIT65B01231-1 | TORQUE ADAPTER -0 BEARING | 1 | |
| 121G875041-601 | WIRING HARNESS,PS ADAPTER-CYCLE STICK TEST BENCH | 1 | |
| 132.5010 | UAS - WHEEL ADAPTER RING FOR P/N 3-1531-1/-2/-3 | 1 | |
| 132.5053 | UAS - WHEEL ADAPTER RING FOR P/N C20195152 / C20195000-3 / C20195002- 2/3 / C20195162 | 1 | |
| 132.5066 | UAS - WHEEL ADAPTER RING FOR P/N 2606735-1/-2 | 1 | |
| 132.5112 | UAS - WHEEL ADAPTER RING FOR P/N C20509000 | 1 | |
| 132.5117 | WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 132.5177 | WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 132.5275 | WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 132.5312 | WHEEL ADAPTER RING FOR 3-1720 | 1 | |
| 132.5313 | WHEEL ADAPTER RING FOR 3-1701 | 1 | |
| 14-6801-0120 | TIRE BEAD BRAKER MODEL 14-6801-0120 (TRONAIR) MUST INCLUDE MLW ADAPTER RING Z-1063-17 AND NLW ADAPTER RING Z-1064-10 | 12 | |
| 196T07910-401 | ADAPTER, LIFT - AFT FAIRING PYLON | 1 | |
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | 1 | |
| 235.1000 | SPRING TESTER-SPRING ADAPTER (KUNZ) | 1 | |
| 2558788 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 1 | |
| 2558806 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER) - CAGE: 06848 | 4 | |
| 2560872 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER) - CAGE: 06848 | 1 | |
| 23005426 | BEARING GUIDE-SPURADAPTER GEARSHA | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | GUIDE----BEARING, SPUR ADAPTER GEARSHAFT | 5 | |
| 23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 2 | |
| 23006785 | INSTALLA ON TOOL-SPUR ADAPTER GEAR O-RING | 2 | |
| 23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
| 235.1000 (KUNZ) | SPRING TESTER-SPRING ADAPTER | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 2C14635 | ADAPTER,MOTORING - CORE ENGINE | 1 | |
| 2C14635 REV C | ADAPTER,MOTORING - CORE ENGINE | 1 | |
| 2C14635G01 | ENGINE CORE MOTORING ADAPTER - CF6-80 ENGINES | 1 | |
| 2C14649 | ADAPTER, CORE MOTORING - BORESCOPE | 1 | |
| 2C14649P05 | ADAPTER - CORE ENGINE MOTORING | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
| 2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | 1 | |
| 2C6047 | PULLER ADAPTER-NO. 4 BEARING | 2 | |
| 2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | 1 | |
| 2C6627 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C6627G01 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C81050G01 | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE | 3 | |
| 2C81178G03 | ADAPTER, TORQUE - NO. 3 BEARING LOCK | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81652G01 | ADAPTER, INSTALLER - BEARING, AXIS-B | 1 | |
| 2C81653G01 | ADAPTER, INSTALLER - BEARING, AXIS-D | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 3-1560 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 21 X 7.25 - 10 | 1 | |
| 3-1609-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 13.461 - 13.466 (341,91 - 342,04) | 1 | |
| 3-1610-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 7.968/7.990 (202,39 - 202,95) | 1 | |
| 34L4801 | ADAPTER -IBM 16/4 TOKEN RING CARDBUS | 1 | |
| 3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 11 | |
| 5012373 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS H27 X 8.5 -14 | 1 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 6872646 | GUIDE-SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 4 | |
| 856A1000G09 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 6 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS SUPPORT RING | 1 | |
| 856A1836G01 | ADAPTERS, MAINTENANCE STAND-TO-FORWARD FAN STATOR SUPPORT RING | 10 | |
| 856A2304G02 | ADAPTER TOOL SET, LIFT AND TURN - NO. 1 AND 2 BEARING SUPPORT (LIFT AND TURN ADAPTER) | 2 | |
| 856A2663 | ADAPTER, PULLER - SPLITTER FAIRING | 2 | |
| 856A2663G01 | Puller Adapter - Splitter Fairing (puller adapter) | 23 | |
| 856A3267 | ADAPTER, TEST RIG - NO. 1 AND 2 BEARING SUPPORT AIR FLOW CHECK (TEST RIG ADAPTER) | 1 | |
| 856A3267G02 | Adapter, Test Rig - No. 1 and 2 Bearing Support Air Flow Check (test rig adapter) | 10 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 5 | |
| 856A3510G03 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 1 | |
| 856A3510G04 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 10 | |
| 856A3721 | ADAPTER TOOL SET - LIFT AND TURN 1 &2 BEARING SUPPORT (TOOL SET) | 1 | |
| 856A3721G03 | Adapter Tool Set - Lift and Turn 1 &2 Bearing Support (tool set) | 11 | |
| 88657 | Henkel 97208 LOCTITE 10 ml Syringe Airline Adapter - Pack of 2 | 1 | |
| 88678 | Henkel 97245 LOCTITE 30 55 mL Syringe Airline Adapter - Pack of 2 | 3 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 9142702600 | WRENCH ADAPTER - RING NUT | 1 | |
| 956A1613G01 | FUEL METERING UNIT ADAPTER [LEAP-1B] | 6 | |
| 97A28002549000 | ADAPTER, O-RING SEALS | 5 | |
| 97A76102003000 | ADAPTER-SPRING SCALE,THROTTLE CONTROL LEVER | 8 | |
| 97A76102008000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 98A76103003000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 98A76103004000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 5 | |
| 98L07209001000 | ADAPTER,SHORING-THS | 2 | |
| 99-8088-9000 | MEASURING ADAPTERS - | 2 | |
| 9C2126G01 | ADAPTER RING SPOOL 7-9 | 1 | |
| 9C2161 | ADAPTER RING - SPOOL STAGES 7-9 | 1 | |
| 9C2231 | ADAPTER RING SPOOL 2-5 | 1 | |
| 9C2232G01 | ADAPTER RING STAGE 2-5 SPOOL | 1 | |
| 9C2233G01 | ADAPTER RING STAGE 7-9 | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 12 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 8 | |
| A32047-6 | ADAPTER -0 RETAINER RING | 1 | |
| A32047-7 | ADAPTER -0 RETAINER RING | 1 | |
| AT100S/FF-IV94N | AT100S/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDES O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 8 - MM - 1 YEAR WARRANTY | 1 | |
| AT120D/FF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | 1 | |
| AT120D/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120S/FF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120S/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| B19285-1 | "TOOL - CHARGING ADAPTER TO CHARGING VALVE (WITH O-RING WHICH CONFORMS TO | 1 | |
| B32067 | WRENCH ADAPTER -0 NOSE WHEEL STEERING TILLER | 1 | |
| B32067-1 | WRENCH ADAPTER - NOSE WHEEL STEERING TILLER HANDLE | 4 | |
| B57003 | ADAPTER EQPT -0 TRUNNION BEARINGS AND MOUNT, MLG | 1 | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| BST-2912-9 | ADAPTER RING-PROPELLER | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32020-15 | ADAPTER, EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING (ADAPTS J32052 FOR USE ON 737-NG IN LIEU OF C32020-1) | 9 | |
| C32039-1 | Adapter - Functional Test, Nose Landing Gear Steering Actuator | 9 | |
| C79560 | Q-Spring torque adapter | 1 | |
| DG-200 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT, COM-754 | 11 | |
| DPPH-150 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT | 3 | |
| DZZ7297-1 | Torque adapter-clg strut lower bearing | 1 | |
| F65-0-3311 | ADAPTER - TEST, NOSE WHEEL STEERING METERING VALVE (SPL-5281) | 2 | |
| F71188 | ADAPTER ASSY -0 HYDRAULIC PRESSURE USED DURING | 1 | |
| F80176-1 | TORQUE WRENCH ADAPTER - MAIN LANDING GEAR TRUNNION, AFT BEARING NUT | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80202-1 | Allen Adapter -Nose Wheel Steering Cylinder | 8 | |
| G54014 | ADAPTER -0 PIVOT BOLT, SPRING BEAM | 1 | |
| G54014-1 | ADAPTER - PIVOT BOLT, SPRING BEAM | 2 | |
| G601R102002-1 | Adapter Kit - Mooring | 1 | |
| GS18298-1 | WITH GS18300-1 ADAPTER KIT DURING PROPELLER BALANCING | 6 | |
| GSB0800002 | KIT-NOSE AND MAIN WHEEL MEASURING ADAPTER | 1 | |
| GSB0800003 | ADAPTER-MAIN WHEEL MEASURING | 4 | |
| HCU200-FULL-BNC | HCU200-FULL-BNC;HCU200BNC with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-F | HCU200-FULL-F;HCU200F with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
| HU21570 | ADAPTER - FRONT BEARING HOUSING AND LOW PRESSURE BEARING FEED | 1 | |
| HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | 1 | |
| HU22699 | ADAPTER - BEARING, L.P. TURBINE | 1 | |
| HU55181-1 | ADAPTER - SPRING, INSTALL / REMOVE HS GEARBOX. | 6 | |
| IPPLP4103-8 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT MS14103-8 BEARINGS | 1 | |
| IPPLP4104-10 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-10) | 1 | |
| IPPLP4104-14 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-14) | 1 | |
| IPPLP4104-6 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-6) | 1 | |
| IPPLP4104-7 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14104-7) | 1 | |
| K27068-10 | MEASURING TOOL - ENCODER CALIBRATION ADAPTER SET | 7 | |
| K32032-1 | WRENCH ADAPTER - STEERING NUT, NLG | 10 | |
| LIL19352 | GM/FORD ADAPTER W/O-RING BLK | 1 | |
| M46228 | ADAPTER - LOCKING SPRING NLG A320NEO | 5 | |
| MBEU57397 | ADAPTER, TEST-SEAT FIRING BREECH | 1 | |
| MF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 6 | |
| MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM AND CENTERING MECHANISM, LATERAL CONTROL | 2 | |
| MMG060-05 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-12 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-19 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-32 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-33 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | 1 | |
| N4148800 | AT120D/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. 2,275.00 2,275.00 - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 2 - 200MM - 1 YEAR WARRANTY | 2 | |
| N4148900 | AT120D/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 17 - MM - 1 YEAR WARRANTY | 2 | |
| N4149000 | AT100S/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 2 - 15MM - 1 YEAR WARRANTY | 1 | |
| N4149300 | AT80D/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING | 1 | |
| N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
| PWA 28024 | ADAPTER-RING | 1 | |
| PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | 1 | |
| PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
| PWA27735 | RING, ADAPTER - REAR COMP DR TEC REAR_[PWA27735] | 1 | |
| PWA45849 | ANTI-ROTATION ADAPTER NO.2 BEARING | 3 | |
| PWA85843 | ADAPTER - TEST, NUMBER 3 BEARING COMPARTMENT VACUUM | 1 | |
| PWA88125 | ADAPTER - N4 BEARING COMPARTMENT SCAVENGE TUBE | 1 | |
| PWC31280-202 | MEASURING ADAPTER - PRATT & WHITNEY CANADA | 3 | |
| PWC37504 | measuring adapter - Pratt & Whitney Canada | 1 | |
| PWC37560 | measuring adapter - Pratt & Whitney Canada | 4 | |
| PWC37562 | measuring adapter - Pratt & Whitney Canada | 4 | |
| PWC37563 | measuring adapter - Pratt & Whitney Canada | 3 | |
| PWC37796 | ADAPTER, NO. 3 BEARING RUNNER PULSE PICK-UP | 1 | |
| PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | 1 | |
| PWC62296 | RING-ADAPTER | 1 | |
| PWC85973 | ADAPTER RING - BUILD STAND | 1 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
| RF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| ST2580-267-XX-X-X | WRENCH - SPANNER ADAPTER FOR BACN10RF BEARING RETAINER NUTS (ST2580-267 DRAWING) | 1 | |
| T131946 | Q-Spring torque adapter | 1 | |
| TE65B90115 | ADAPTER CABLE - ENGINE OIL QUANTITY, AIRPLANE WIRING | 1 | |
| WR-2006907X101-1-1 | WRENCH ADAPTER - NOSE WHEEL STEERING | 1 | |
| WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
| Z-1063-11 | TIRE BEAD BREAKER RING - NOSE WHEEL ADAPTER | 3 | |
| Z-1063-13 | TIRE ADAPTER RING-MAIN | 6 | |
| Z-1063-14 | TIRE BEAD BREAKER RING - MAIN WHEEL ADAPTER | 3 | |
| Z-3072-20 | MAIN TIRE ADAPTER RING (30X9.00-15) | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
