| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| RNC7913-10 | ADAPTER - REMOVAL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 114-1077 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 4 | |
| 2024 | ADAPTER - INSTALLATION/REMOVAL, FUSELAGE DRAIN VALVE | 10 | |
| 206-038-051-1 | ADAPTER-PLATE FOR REMOVAL OF TRANSMISSION | 1 | |
| 247C5260 | FIXTURE - FORWARD ADAPTER - REMOVAL | 1 | |
| 2558788 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 1 | |
| 2558807 | IB AND OB WHEEL HALF REMOVAL SUPPORT ADAPTER) - CAGE: 06848 | 3 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 2C14113 | HPC ROTOR FWD SPLINE ADAPTER REMOVAL-INST. | 1 | |
| 2C14113G01 | TOOL, INSTALLATION AND REMOVAL - SPLINED ADAPTER | 3 | |
| 2C81658G01 | Adapter, Removal Bearing Axis-C,E&F&G | 1 | |
| 2C81659G01 | Adapter, Removal Bearing, Axis - D | 1 | |
| 2C81660G01 | Adapter, Removal Bearing, Axis-G Front | 1 | |
| 2C81661G01 | Adapter, Removal Bearing Axis-E Rear | 1 | |
| 2C81664G01 | Adapter, Removal Air/Oil Seperator Axis-E | 1 | |
| 2ME65B40005 | ADAPTER - AIR CYCLE MACHINE INSTALLATION AND REMOVAL | 1 | |
| 2ME65B40006 | ADAPTER - THRUST RECOVERY VALVE AND HEAT EXCHANGER, REMOVAL AND INSTALLATION | 8 | |
| 3MIT65B03670 | ADAPTER - HORIZONTAL STABILIZER ACTUATOR SAFETY ROD, REMOVAL & INSTL | 5 | |
| 6795637 | ADAPTER-INSTALLATION AND REMOVAL, GAS PRODUCER TURBINE REAR | 2 | |
| 6797899 | ADAPTER - INSTALLATION AND REMOVAL SCREW THREAD INSERT | 1 | |
| 6SF7062-501 | Adapter - APU Removal/Installation | 1 | |
| 831411-1 | SEAL ROTOR AND SPLINED ADAPTER REMOVAL/ INSTALLATION KIT (CONSISTS OF 831411-11 SEAL PULLER, 831411-13 SEAL INSTALLER, AND 831411-15 SPLINE PULLER) | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G09 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 7 | |
| 856A2573G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 6 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | 1 | |
| 856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 6 | |
| 956A1608 | ADAPTER - REMOVAL/INSTALLATION - FUEL PUMP | 2 | |
| 956A1608G01 | ADAPTER, REMOVAL/INSTALLATION - FUEL PUMP | 4 | |
| 956A3608G01 | ADAPTER, REMOVAL/INSTALLATION - FUEL PUMP (LRU) | 3 | |
| 956A3616G01 | ADAPTER - INSTALLATION/REMOVAL, FADEC | 5 | |
| 9C3403G01 | ADAPTER, INSTALL/REMOVAL - LINE REPLACEABLE UNITS | 1 | |
| B20004-21 | ADAPTER - ACCESS PANEL, LEVERAGE (SCREW REMOVAL) (IDENTICAL TO ST2753) (THE BOEING COMPANY) | 16 | |
| B20004-42 | ADAPTER - ACCESS PANEL, LEVERAGE (SCREW REMOVAL) (IDENTICAL TO ST2753) | 12 | |
| B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | 1 | |
| B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 7 | |
| B2800-11 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 8 | |
| B2800-13 | Adapter-Sump DrainValve, Removal/Installation | 1 | |
| B28001-1 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 8 | |
| B28001-11 | Adapter - Sump Drain Valve, Removal/Installation | 9 | |
| B28001-13 | Adapter - Sump Drain Valve, Removal/Installation | 16 | |
| B28001-18 | Adapter - Sump Drain Valve, Removal/Installation | 17 | |
| B28001-8 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 1 | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| C21004-1 | JACK ADAPTER- INSTL /REMOVAL, AIR CONDITIONING | 1 | |
| C21005-1 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK | 3 | |
| C21005-62 | HOIST ADAPTER - INSTALLATION/REMOVAL - AIR CONDITIONING PACK | 3 | |
| C21005-70 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK | 9 | |
| C24002-78 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK | 16 | |
| C27040 | HOIST ADAPTER-INSTL/REMOVAL.FLAP TRACK | 1 | |
| C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 6 | |
| C27040-29 | Hoist Adapter - Installation/Removal, Flap Track (CE) | 5 | |
| C44001 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 1 | |
| C44001-1 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 2 | |
| C44001-48 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 6 | |
| C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 6 | |
| C44001-58 / C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 2 | |
| C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 5 | |
| CP30248 | ADAPTER - LEFT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30249 | ADAPTER - CENTER (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30250 | ADAPTER - RIGHT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| F72849-1 | ADAPTER ASSEMBLY-BRAKE INST & REMOVAL | 2 | |
| G21009-1 | Adapter Equipment -Heat Exchanger/Plenum Removal/ Installation. Ac Pack | 1 | |
| G21009-40 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM REMOVAL/ INSTALLATION, AC PACK | 2 | |
| G21009-59 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM REMOVAL/ INSTALLATION, AC PACK | 1 | |
| G21009-64 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM REMOVAL/ INSTALLATION, AC PACK | 2 | |
| G21009-65 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM REMOVAL/ INSTALLATION, AC PACK | 3 | |
| G21010-1 | ADAPTER - CONDENSER, COMPACT MIXER, WATER EXTRACTOR, REMOVAL/INSTALLATION, AIR CONDITIONING PACK (CE) | 2 | |
| G21012-1 | ADAPTER - REHEATER REMOVAL AND INSTALLATION, AIR CONDITIONING PACK (CE) | 2 | |
| G27064-31 | ADAPTER - TRAILING EDGE FLAP ACTUATOR, REMOVAL/INSTALLATION (CE) | 5 | |
| G27090-1 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 2 | |
| G27090-54 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 1 | |
| HU37594 | ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 14 | |
| HU44819 | ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 10 | |
| HU50405 | ADAPTER - REMOVAL/INSTALLATION, 31 MODULE | 1 | |
| HU50405-1 | ADAPTER - REMOVAL/INSTALLATION, 31 MODULE | 1 | |
| HU55076 | ADAPTER - TROLLEY, PNEUMATIC STARTER, INSTALL/REMOVAL | 4 | |
| HU55178-2 | ADAPTER - TROLLEY, PNEUMATIC STARTER, INSTALL/REMOVAL | 5 | |
| HU55178-3 | ADAPTER - TROLLEY, PNEUMATIC STARTER, INSTALL/REMOVAL | 7 | |
| HU55436-2 | ADAPTER-TROLLEY,IDG REMOVAL/INSTALLATION | 11 | |
| HU80617 | ADAPTER - REMOVAL/INSTALLATION, 31 MODULE | 1 | |
| J25011-1 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 1 | |
| J25011-64 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE, REMOVAL / INSTALLATION | 3 | |
| J25011-68 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 4 | |
| J27132-1 | Adapter equipment-aileron PCU,removal and installation | 2 | |
| J29003-72 | Hoist Adapter - ADU Removal/installation | 4 | |
| J29003-85 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 7 | |
| J29003-93 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION | 7 | |
| J29003-96 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 1 | |
| J32025-1 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 7 | |
| J32025-29 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 4 | |
| J51005-1 | Installation/Removal Adapter - Fuselage Drain Valv | 3 | |
| J51005-7 | Adapter - Installation/Removal, Fuselage Drain Valve | 10 | |
| J54005-51 | Hoist adapter-diagonal brace removal/installation | 4 | |
| K21004 | ADAPTER EQUIPMENT-HEAT EXCHANGER CLUSTER REMOVAL AND INSTALLATION | 1 | |
| K21004-1 | Adapter Equipment -Heat Exchanger Cluster. Removal And Installation (Ce) | 1 | |
| K21004-1 Upgrade | Adapter equipment-heat exchanger cluster removal and installation | 1 | |
| K21004-40 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 4 | |
| K21004-72 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 9 | |
| K21004-79 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 2 | |
| K21004-84 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 3 | |
| K21004-85 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 6 | |
| K21004-94 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 1 | |
| K21014-1 | JACK ADAPTER - CONDENSER, AIR CONDITIONING PACK, REMOVAL AND INSTALLATION (CE) | 7 | |
| K25002-139 | ADAPTER EQUIPMENT - OFAR/OFCR MODULE REMOVAL/INSTALLATION | 6 | |
| K27002 | Adapter - TE Geared Rotary Actuator, Removal / Installation | 1 | |
| K27002-1 | Adapter - TE Flap Geared Rotary Actuator, Removal | 1 | |
| K27002-83 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 1 | |
| K27002-83 upgrade to K27002-85 | Adapter eqpt-te geared rotary actuator，removal/installation | 1 | |
| K27002-85 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 9 | |
| K27002-97 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL / INSTALLATION | 1 | |
| K27003 | ADAPTER EQPT -0 AILERON PCU REMOVAL/ | 1 | |
| K27003-1 | ADAPTER EQUIPMENT - AILERON POWER CONTROL UNIT REMOVAL/ INSTALLATION (CE) | 9 | |
| K27003-1 | ADAPTER EQPT-AILERON PCUREMOVAL/INSTALLATION | 9 | |
| K29001 | ADAPTER EQPT -0 EMP REMOVAL/INSTALLATION | 1 | |
| K29001-1 | ADAPTER EQUIPMENT - ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION (CE) | 3 | |
| K29001-60 | ADAPTER EQUIPMENT - ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION (CE) | 7 | |
| K29001-60 | ADAPTER EQPT-EMPREMOVAL/INSTALLATION | 7 | |
| K32006-1 | HOIST ADAPTER EQUIPMENT - NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION (CE) | 7 | |
| PWA102830 | ADAPTER-REMOVAL HOUSING AND STRAINER ASSY | 1 | |
| PWA211413 | ANTI-TORQUE ADAPTER - REMOVAL OF THE ANGLE GEARBOX | 2 | |
| PWA211861 | ADAPTER, INSTALL/REMOVAL-HPT , ROTAR MATING RING | 2 | |
| PWA26204 | ADAPTER, REMOVAL - TEC NO.4 BRG REPLC_[PWA26204] | 2 | |
| RNC7913-10 | ADAPTER-REMOVAL | 1 | |
| SE-28-1103 | ADAPTER ASSEMBLY - SUMP DRAIN VALVE REMOVAL | 2 | |
| SE28-1103 | Adapter Assembly - Sump Drain Valve Removal | 2 | |
| SPL-1975 | ADAPTER - INSTALLATION/REMOVAL FUSELAGE DRAIN VALVE | 1 | |
| T33264 | Anti-Skid Adapter Removal | 10 | |
| XPWA111721 | Adapter,removal-hpt,rotor 1,heatshield | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
