| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 97A28002542000 | ADAPTER ADAPTER - D | 9 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| 98F07108635000 | ADAPTER-AFT,JACKING | 14 | |
| F80212-30 | Adapter - Rudder Pedal Force Check | 20 | |
| (CALIB) 101-00907 | Adapter-Fuel Return Valve (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 200909-CA | ADAPTER-MLG JACK same as P/N TMHMA02-00-00 | 1 | |
| (CALIB) 200951A | ADAPTER-NLG JACK | 1 | |
| (CALIB) 31171-000-002 | SG239 Light Maintenance Crane - Adapter Front LCV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 60-3200-0010 | ADAPTERS - FUNCTIONAL TEST BOX ( 2 CABLES ) (CALIBRATION) | 1 | |
| (CALIB) 60159-101 | ADAPTER-CABLE AY, ELECTRIC (CALIBRATION) | 1 | |
| (CALIB) 6799620 | ADAPTER Â LIFTING, TURBINE UNIT ASSEMBLY NOTE: SUPERSEDED BY 23032998 FOR T-56-A-7A(N), 10WA, 14, (CALIBRATION) | 1 | |
| (CALIB) 856A2659G01 | FILTER ADAPTER - DRY OUT (CALIBRATION) | 1 | |
| (CALIB) 98A28007570000 | ADAPTER ADAPTER - VENT AND DRAIN VALVE, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98AMS172327002 | WRENCH WRENCH-ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108293000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK (CALIBRATION) | 1 | |
| (CALIB) 98D28108560000 | ADAPTER - TUBE, WATER DRAIN (CALIBRATION) | 1 | |
| (CALIB) 98D28108562000 | ADAPTER ADAPTER, PRESSURE DRAIN - ACT (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98D34103002000 | ADAPTERS ADAPTERS - AIR DATA SYSTEM FLUS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103002102 | AIR DATA SYSTEM FLUSHING 2-PIN ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 98F27508278001 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508278002 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103000000 | ADAPTER ADAPTER-COVER STATIC PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209010000 | ADAPTER ADAPTER-TURN BARREL, LOWER RUDD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209015000 | ADAPTER ADAPTER-TURN BARREL,UPPER RUDDE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309008000 | SUPPORT ADAPTER KIT-EHA OR SERVOCONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | |
| (CALIB) 98V07109001000 | ADAPTER - AFT JACKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L44508762000 | ADAPTER-CVMS, ACCESS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27060-1 | ADAPTER EQUIPMENT - CONTROL WHEEL (CALIBRATION) | 1 | |
| (CALIB) C49008-37 | Adapter EQPT - APU Jacking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9520003-0001 | ADAPTER, HANDLE LOAD - ESCAPE HATCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J23002-16 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE (CALIBRATION) | 1 | |
| (CALIB) J24001-43 | Hoist Adapter- VSCF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J24001-50 | Hoist Adapter- VSCF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21010-45 | ADAPTER - JACK, RAM AIR FAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21011-59 | ADAPTER - JACK, ADJUST ANGLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K24001-1 | HOIST ADAPTER ASSY - VFSG & ASG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K29001-1 | Adapter Eqpt - EMP R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M28TC0015000 | TEST ADAPTER - DISPENSE PUMP | 1 | |
| (CALIB) PWA111085 | Adapter, Vacuum Check - Engine Assy. (CALIBRATION) (CALIBRATION) | 1 | |
| -37 supersedes -28 and -10 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| 00460-015-000 | ADAPTER - TRIPOD JACK | 1 | |
| 00460-042-000 | NOSE JACKING ADAPTER - 747 | 1 | |
| 008407 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 00GSE-1039-02 | 00GSE-1039-02 - TRANSFILL ADAPTER | 1 | |
| 00GSE-1041-00 | ADAPTER - OXYGEN REMOTE FILL PANEL | 1 | |
| 01-0169-01 | ADAPTER MST-903 | 1 | |
| 01-32-2798F | ADAPTER, 3/4" NPT, 3/4"-16UNF-2A | 1 | |
| 0107-6-6 | MALE PIPE ADAPTER 3/8-18NPTF MALE 3/8-18NPSM FEMALE | 1 | |
| 02-2921-1/4 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. STUB | 1 | |
| 02-2921-1/8 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. STUB | 1 | |
| 02-2921-3/16 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. STUB | 2 | |
| 02-2921-3/16C | THREADED SHANK ADAPTER DRILLS 1/4"-28 COBALT STUBBY 3/4" O.A.L ( DRILL SIZES: 3/16" )( DECIMAL EQUIVALENT: .1875" ) | 1 | |
| 02-2921-3/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
| 02-2921-3/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2921-5/16 | THREADED SHANK ADAPTER DRILLS 1/4"-28 H.S.S. STUBBY 3/4" O.A.L ( DRILL SIZES: 5/16" )( DECIMAL EQUIVALENT: .3125" ) | 1 | |
| 02-2921-5/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2921-5/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2921-7/32 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. STUB | 1 | |
| 02-2924-3.17 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2924-3.17C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2924-4.76 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2924-4.76C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2924-6.35 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2924-6.35C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2961-1/4 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
| 02-2961-1/8 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 2 | |
| 02-2961-3/16 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 2 | |
| 02-2961-3/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
| 02-2961-3/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2961-5/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
| 02-2961-5/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2961-7/32 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
| 02-2962-10 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
| 02-2962-10C | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-010 | 1 | |
| 02-2962-11 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT 1-1/4" O.A.L ( DRILL SIZES: 11 )( DECIMAL EQUIVALENT: .1910" ) | 1 | |
| 02-2962-11C | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-011 | 1 | |
| 02-2962-20 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
| 02-2962-21 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
| 02-2962-30 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT 1-1/4" O.A.L ( DRILL SIZES: 30 )( DECIMAL EQUIVALENT: .1285" ) | 1 | |
| 02-2962-40 | THREADED SHANK ADAPTER DRILL 40 (1-1/4") SHORT | 1 | |
| 02-2962-8C | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-008 | 1 | |
| 02-2964-3.17 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2964-3.17C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2964-4.76 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2964-4.76C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2964-6.35 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2964-6.35C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2971-1/4 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. LONG | 1 | |
| 02-2971-1/8 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. LONG | 2 | |
| 02-2971-3/16 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. LONG | 2 | |
| 02-2971-3/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
| 02-2971-3/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2971-5/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
| 02-2971-5/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2971-7/32 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. LONG | 1 | |
| 02-2972-11 | THREADED SHANK ADAPTER DRILLS 1/4"-28 H.S.S. LONG 2-1/8" O.A.L ( DRILL SIZES: #11 )( DECIMAL EQUIVALENT: .1910" ) | 1 | |
| 02-2972-40 | THREADED SHANK ADAPTER DRILL 40 (2-1/8") LONG | 1 | |
| 02-2973-DC | COBALT DRILL-SHANK ADAPTER TYPE "D" WIRE SIZED, LONG | 1 | |
| 02-2974-3.17 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2974-3.17C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2974-4.76 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2974-4.76C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2974-6.35 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-2974-6.35C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
| 02-7833C0110 | Tronair 02-7833C0110 Blue 12-Ton Hydraulic Axle Jack with MainNose Gear Adapters (CE) | 3 | |
| 02C50A07-1-75 | TOOL-BAYONET ADAPTER | 2 | |
| 03038 | HYDRO-TEST ADAPTER - 1¼”-12 UNF | 1 | |
| 03610 | HYDRO-TEST ADAPTER - 1”-12 UNF | 1 | |
| 04482 | FILL ADAPTER - HANSEN QUICK CONNECT - 5/8” - 18 UNF | 1 | |
| 04485 | FILL ADAPTER - HANSEN QUICK CONNECT - 3/8”-24 UNF | 1 | |
| 05-001 | AERO Specialties 05-001 Nitrogen Inflating Valve Adapter - 3000 PSI | 2 | |
| 05-001 | INFLATING VALVE ADAPTER, NITROGEN -3000PSI | 2 | |
| 06-5004-0500-A2 | CART, HYDRAULIC SERVICING -KHC1858 KIT ADAPTERS | 3 | |
| 07-110-9200 | ADAPTER - FOR 3214-30 / 3214-31 | 1 | |
| 07-110-9650 | ADAPTER - FOR 3117-01 BATTERY | 1 | |
| 07-401B | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-450 | Gooseneck Insert Adapters (Shank size: .401") (Insert size: .406") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-451 | Gooseneck Insert Adapters (Shank size: .401") (Insert size: .406") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) (Shank size: .401") (Insert size: .531") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-455 | Gooseneck Insert Adapters (Shank size: .401") (Insert size: .406") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) (Shank size: .401") (Insert size: .531") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) (Shank size: .498") (Inse | 1 | |
| 07-456 | Gooseneck Insert Adapters (Shank size: .401") (Insert size: .406") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) (Shank size: .401") (Insert size: .531") (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) (Shank size: .498") (Inse | 1 | |
| 07-498A | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) (Shank size: .498" Shank) (Accepts: .498" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Ad | 1 | |
| 07-70407 | Shank Adapter (For use with: .401 Shank Sets) (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) | 1 | |
| 0884EE | ADAPTER-PROBE, PITOT STATIC | 1 | |
| 1013.5 | REAR FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 2 | |
| 1014.5 | NOSE FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 3 | |
| 1062 | COM-15047 ADAPTER - SNAP ON CONNECTOR, SC | 3 | |
| 10113 | TORQUE ADAPTER PROP BOLTS-5/8" HEAD ATA 61 | 15 | |
| 10390 | ADAPTER CABLE-CHADWICK | 1 | |
| 098736 | ADAPTER-TORQUE WRENCH | 1 | |
| 0118233 | ADAPTER, LIFTING-OBIGGS | 1 | |
| 173785 | CHARGING ADAPTER - OXYGEN SYSTEM | 9 | |
| 0HME65B81110-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP | 1 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 1-16679A | ADAPTER M/F 1/2-1/74 -5879 | 1 | |
| 1.325.010 | UAS - WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 1.325.053 | UAS - WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 1.325.066 | UAS - WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 1.325.112 | UAS - WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 1.325.117 | UAS - WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 1.325.177 | UAS - WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 1.325.239 | UAS - WHEEL ADAPTER RING FOR B787 NLG | 1 | |
| 1.325.275 | UAS - WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 10 XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH | 5 | |
| 10-008 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-010 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 4 | |
| 10-011 | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-011 | 1 | |
| 10-013 | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-013 | 1 | |
| 10-016 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-021 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-023 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-028 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-030 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-031 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-036 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-040 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-046 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-208 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-210 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 5 | |
| 10-216 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-221 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-223 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-228 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-230 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 4 | |
| 10-231 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-236 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-240 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-246 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-308 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-310 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-316 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-321 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-328 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-330 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-331 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-336 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-340 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-346 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-400-0192 | ADAPTER CASE BOLT ADAPTER (SET OF 8) - 3X699 | 1 | |
| 100299 | Aviation Battery Systems 100299 Multi-Purpose Extension Adapter, 10 Ah, 15 Ah | 1 | |
| 1007336 | DMP-F-SONDEN-ADAPTER | 1 | |
| 10055988 | ADAPTER-EXTENSION, SOCKET WRENCH | 1 | |
| 101-00184-665 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
| 101-00301 | Fuel Quantity Adapter Module for Lockheed L-188 | 1 | |
| 101-00302 | Fuel Quantity Adapter Module for Fairchild F-27F, F-27J | 1 | |
| 101-00303 | Fuel Quantity Adapter Module for Bell AH-1 | 1 | |
| 101-00306 | Fuel Quantity Adapter Module for Dehavilland DHC-6 | 5 | |
| 101-00307 | Fuel Quantity Adapter Module for Dehavilland DHC-6 | 4 | |
| 101-00313 | Fuel Quantity Adapter Module for Fairchild F-27, F-27J | 1 | |
| 101-00315 | Fuel Quantity Adapter Module for Bell 204B, 205A, UH-1F | 1 | |
| 101-00320 | Fuel Quantity Adapter Module for Shorts SD3-30, SD3 -60 | 1 | |
| 101-00322 | Fuel Quantity Adapter Module for Convair CV-580 | 1 | |
| 101-00323 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | 1 | |
| 101-00324 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | 1 | |
| 101-00329 | Fuel Quantity Adapter 101-00329 for Bell 206L | 1 | |
| 101-00336 | Fuel Quantity Adapter Module for Sikorsky S-58T | 1 | |
| 101-00405 | BARFIELD FUEL QUANTITY ADAPTER MODULE FOR CESSNA 210, 337 PN: 101-00405 | 1 | |
| 101-00425 | Fuel Quantity Adapter Module for Bell 205A-1 / UH1 | 5 | |
| 101-00436A | Fuel Quantity Adapter Module for BAC-111 400 | 1 | |
| 101-00436B | Fuel Quantity Adapter Module for BAC-111 400 | 1 | |
| 101-00440 | Fuel Quantity Adapter Module for Douglas DC-9 | 1 | |
| 101-00442 | Fuel Quantity Adapter Module for Douglas DC-9 | 1 | |
| 101-00446 | Fuel Quantity Adapter Module for Beech C-90, E-90, A-100 | 3 | |
| 101-00465 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | 1 | |
| 101-00465/466 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | 1 | |
| 101-00466 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | 1 | |
| 101-00477B | Fuel Quantity Adapter Module for Mitsubishi MU-300 (Fuselage Tank) | 2 | |
| 101-00480 | Fuel Quantity Adapter Module for Fokker F-28 | 1 | |
| 101-00486 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-00487 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | 1 | |
| 101-00493 | Fuel Quantity Adapter Module for Fokker F-28, 4000 | 1 | |
| 101-00547 | Fuel Quantity Indicator Adapter Cable for Boeing 101-00542 | 1 | |
| 101-00562 | ADAPTER CABLE - FUEL QUANTITY INDICATING SYSTEM (FQIS) TESTER (USED ON AIRPLANES WITHOUT DENSITOMETERS) (BARFIELD INSTRUMENT CORP.) | 4 | |
| 101-00563 | Fuel Quantity Adapter Module for Boeing 727, Boeing 737 -Dig Tank | 1 | |
| 101-00802 | Fuel Quantity Adapter Cable for Kingair E-90, 100, A-100, B-100, 200, B-200, 300, 350 | 9 | |
| 101-00805 | ADAPTER MODULE-KING AIR | 2 | |
| 101-00807 | Barfield 101-00807 Fuel Quantity Adapter Module, For Bell Helicopter | 4 | |
| 101-00808 | Fuel Quantity Adapter Module for DHC-8 | 7 | |
| 101-00808 (MOD A) | FUEL QUANTITY ADAPTER MODULE FOR DHC-8 | 1 | |
| 101-00808 (Mod A) | Fuel Quantity Adapter Module for DHC-8 | 1 | |
| 101-00808MODA | FUEL QUANTITY ADAPTER MODULE FOR DHC-8 | 1 | |
| 101-00814 | Barfield 101-00814 Fuel Quantity Probe Adapter Cable, For Aircraft | 9 | |
| 101-00817 | B1900 Test Adapter Module/101-00802/Beech Plastic to DIN Connectors | 7 | |
| 101-00822 | Fuel Quantity Adapter Module for Embraer EMB-120 | 1 | |
| 101-00831 | Barfield 101-00831 Fuel Quantity Adapter Cable, For Fixed Wing Aircraft | 6 | |
| 101-00855 | Fuel Quantity Adapter Cable for BAE 125-800 | 3 | |
| 101-00857 | Fuel Quantity Adapter Module for BAE 125-800 | 1 | |
| 101-00874 | Fuel Quantity Adapter Module for DHC-8 | 9 | |
| 101-00876 | Fuel Quantity Adapter Module for DHC-8 | 8 | |
| 101-00878 | Barfield 101-00878 Adapter, For Malibu Meridian, Piper Aircraft | 3 | |
| 101-00907 | ADAPTER - FUEL RETURN VALVE | 10 | |
| 101-00907=5A | ADAPTER - FUEL RETURN VALVE | 1 | |
| 101-01421 | Fuel Quantity Adapter Module for Sikkorsky Blackhawk S-70, UH-60 | 3 | |
| 101-01422 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01423 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01424 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01425 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01426 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01445 | Fuel Quantity Adapter Module for MC Donnell Douglas AH-64A | 1 | |
| 101-01456 | Fuel Quantity Adapter Module for American Eurocopters MBB-BK117 | 2 | |
| 101-01463 | Barfield 101-01463 Fuel Quantity Adapter Module, For Learjet Aircraft | 5 | |
| 101-01467 | CABLE: ADAPTER,PROBE,#2-6, FOR THE ATR42/72 | 5 | |
| 101-01520 | Fuel Quantity Adapter Module for Boeing 747-100, 747-200 | 1 | |
| 101-380091-2/939 | CALIBRATION ADAPTER TEST BOX (MEGGIT) MM 200 ATA 77-00-00 | 2 | |
| 101009 | Adapter-Fuel Pump | 1 | |
| 1014826 | SPRAY ADAPTER - TRENT700 | 1 | |
| 10160-1 | DOUBLE INT ADAPTER NON-POLORIZED | 1 | |
| 1016309 | KIT-ADAPTER GSP,SCS350 | 1 | |
| 1016310 | KIT-ADAPTER CU,SCS350 | 1 | |
| 102-00902 | Turbine Temperature Adapter Cables for CF6-80A, A1, A2 engine | 4 | |
| 102-00903 | Turbine Temperature Adapter Module for CF6 and CF6-50 engine | 1 | |
| 103004 | 1/4"F - 3/8"M ADAPTER | 1 | |
| 10231007 | ADAPTER FOR FLIRT-360 | 1 | |
| 10390-1 | ADAPTER CABLE-CHADWICK | 1 | |
| 105K823G02 | ALLM LIFTING - ADAPTER | 1 | |
| 1087-3010-FA-00 | 206/407/TH-67 ADAPTER KIT | 1 | |
| 109-3400-38-1 | ADAPTER (LSE-53) | 1 | |
| 109-3900-89-101 | JACKS & ADAPTERS, - MAIN AND NOSE LANDING GEAR | 1 | |
| 1091-324-R | ADAPTER DC TO 18 GHZ TNC(F) - N(M) 50 OHM | 1 | |
| 1091-325-R | ADAPTER DC TO 18 GHZ TNC(M) - N(M) 50 OHM | 1 | |
| 10C1002 | ADAPTER - HORIZONTAL - LIFT - FI | 1 | |
| 10C1002G01 | ADAPTER, HORIZONTAL - LIFT, FIXTURE (LIFT FIXTURE ADAPTER) | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 10C1016 | FIXTURE, ADAPTER - COMPR ROTOR | 1 | |
| 10C1022G01 | ADAPTER SET ASSEMBLY PEDESTAL - COMPRESSOR REAR FRAME, | 1 | |
| 10C1035G06 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 10C1045G02 | ADAPTER, ANTI - TORQUE - FAN STATOR TO FAN DISK, | 1 | |
| 10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | 1 | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT (TORQUE ADAPTER) | 1 | |
| 10C1137 | KIT, ADAPTER - HYDRAULIC PUMP | 1 | |
| 10C1137G01 | KIT, ADAPTER - HYDRAULIC PUMP | 2 | |
| 10C1138 | ADAPTER - MOTORING/LOCKING CORE ENGINE | 1 | |
| 10C1138G03 | ADAPTER, MOTORING/LOCKING-CORE ENGINE | 1 | |
| 10C1153 | ADAPTER, PRESSURE CHECK-FUEL M | 1 | |
| 10C1268 | ADAPTER - TORQUE - BOOSTER TO F | 1 | |
| 10HXBU-SS | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| 10M-2228 | Adapter-brake bleeder hose | 1 | |
| 10XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 5 | |
| 11-105 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/8) | 2 | |
| 11-107 | COBALT THREADED SHANK ADAPTER DRILL 1/4" - 28 | 2 | |
| 11-109 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (3/16) | 3 | |
| 11-111 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (7/32) | 1 | |
| 11-113 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/4) | 1 | |
| 11-20-0947 | IDT - Manual - Adapter Kit | 1 | |
| 11-205 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/8) | 1 | |
| 11-207 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (5/32) | 2 | |
| 11-209 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (3/16) | 1 | |
| 11-21-9933 | IDT - Manual - Adapter Kit | 1 | |
| 11-211 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (7/32) | 1 | |
| 11-213 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/4) | 1 | |
| 11-305 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/8) | 1 | |
| 11-307 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (5/32) | 2 | |
| 11-309 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (3/16) | 1 | |
| 11-31-1570 | IDT - Manual - Adapter Kit | 1 | |
| 11-31-2176 | IDT - Manual - Adapter Kit | 1 | |
| 11-31-3337 | IDT - Manual - Adapter Kit | 1 | |
| 11-31-7559 | IDT - Manual - Adapter Kit | 1 | |
| 11-313 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/4) | 2 | |
| 11-841487-101 | ADAPTER(REHEATER A330 PN 968A0000-03 | 1 | |
| 11-851487-101 | ADAPTER(REHEATER A330 PN 968A0000-03 | 1 | |
| 11-851487-108 | ADAPTER(REHEATER A330 PN 968A0000-03 | 1 | |
| 11-952 | 3/8" - 1/2" ADAPTER | 1 | |
| 110-042 | ADAPTER - FOR HYDROSATIC TESTING (HOSE) | 1 | |
| 110602003-00 | ADAPTER CABLE - EEC DATALOADING | 7 | |
| 110602005-01 | PDL INTERFACE CABLE -603 ADAPTER CABLE | 2 | |
| 110705-1 | ADAPTER WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGINE | 1 | |
| 112-00007 | ADAPTER - FUEL QUANTITY | 4 | |
| 112-52-0001 | TOOL - MISCELLANEOUS, TORQUE TOOL ADAPTER | 1 | |
| 112632 | 112632;APX-100 Self Test Adapter | 1 | |
| 1134100-501 | ADAPTER - FLUSHING, EVAPORATOR | 1 | |
| 114-1077 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 4 | |
| 114-1145 | ADAPTER FOR A LEAK TEST OF PUSH-IN TYPE THERMAL REIEF PLUGS | 2 | |
| 114-1618 | ADAPTER FOR A LEAK TEST OF PUSH-IN TYPE THERMAL RELIEF PLUGS | 1 | |
| 114071-60 | ADAPTER-UNIT | 1 | |
| 115-00057 | Pitot Test Adapter / Surgical Tubing with AN-4 Fitting | 4 | |
| 1150819 | CABLE-ADAPTER | 1 | |
| 11524A | APC-7 TYPE-N ( F ) ADAPTER | 2 | |
| 1159GSE50293-1 | BUSHING ASSY-JACKING ADAPTER MLG | 2 | |
| 1159SEFL20282-1 | ADAPTER-BRAKE BLEED | 2 | |
| 11B28-11924 | ADAPTER - FUEL PRESERVATION CFM56 | 1 | |
| 11C3005 | TOOL KIT - ADAPTER-IGV&VAR STTR VANES | 1 | |
| 11C3012 | ADAPTER - BALANCE AND GRIND-HPTR | 1 | |
| 11C3044 | ADAPTER ASSEMBLY - OVERHEAD SUPPORT - ENGINE MODULES | 1 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 11C3114 | GRIND - ADAPTER - HP COMPR ROTOR-SEAL ROTATING | 1 | |
| 11C3114G05 | GRIND, ADAPTER - HPC ROTOR - SEAL ROTATING | 1 | |
| 11C3129 | ADAPTER - TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR - SHAFT NUT | 1 | |
| 11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | 1 | |
| 11C3163 | ADAPTOR - LIFT TCF HORIZONTAL/ VERTICAL (LIFT ADAPTER) | 1 | |
| 11C3204 | ADAPTER - TORQUE LOCKNUT - NO 1 BRG | 1 | |
| 11C3301 | STAND - ADAPTER-ASSY/DISSY HP COMPR HALF-CASE FWD | 1 | |
| 11C3301G01 | STAND, ADAPTER-A/D HPC CASE HALF FWD | 1 | |
| 11C3407P01 | ADAPTER - BORESCOPE MOTOR, GENX ENGINES | 1 | |
| 11C3447P01 | ADAPTER, TORQUE - OFFSET | 1 | |
| 11C3479G01 | ADAPTER - VSV/VBV | 1 | |
| 11C3515 | ADAPTER - THREAD - LPT CONE SHAFT | 1 | |
| 11C4429G01 | ADAPTER - LOCKING, AGB 747-8F | 1 | |
| 11C4565 | ADAPTER - TORQUE LPT SHAFT TO ELECTRONIC | 1 | |
| 11C4566G04 | ADAPTER SET, MANIFOLD PRESSURE CHECK-FUEL | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11C4613 | ADAPTER - ROLL AROUND STAND | 1 | |
| 11C4614 | ADAPTER - SHIPPING STAND TO JACKING LEGS | 1 | |
| 11C4652 | ADAPTER - ENGINE IN PEDESTALS | 1 | |
| 11C4652G01 | ADAPTER - PROPULSOR IN PEDESTALS | 1 | |
| 11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | 1 | |
| 11C4811 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | 1 | |
| 11C4811G01 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | 1 | |
| 11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | 1 | |
| 11C4856 | ADAPTER, MOTOR - STARTER PAD | 1 | |
| 11MIT65B01221-4 | ADAPTER - WRENCH, HOLDING | 1 | |
| 11MIT65B01231-1 | TORQUE ADAPTER - RESTRICTOR SUPPORT TUBE, BODY LANDING GEAR | 1 | |
| 12-30-01 | KIT - NITROGEN CHARGING ADAPTER | 2 | |
| 12-30-02 | ADAPTER - OXYGEN SYSTEM | 1 | |
| 12-8006-16 | Bowers 12-8006-16 Kroeplin Bluetooth Interface Adapter for 12-G005 + 12-G010 | 1 | |
| 12-951 | 3/8 - 1/2 ADAPTER | 2 | |
| 120031 | CM-17 SL Hd Adapter 1/4 (Qty 10) | 1 | |
| 120032 | CMP-20 Phil Hd Adapter #1 (Qty 10) | 1 | |
| 120033 | CMP-21 Phil Hd Adapter #2 (Qty 10) | 1 | |
| 120034 | CM-24 Sq Dr Adapter 1/4 (Qty 10) | 1 | |
| 120035 | CM-25 SL Hd Adapter 3/16 (Qty 10) | 1 | |
| 120036 | CMS-6 Hex Hd Adapter 3/32 (Qty 10) | 1 | |
| 120037 | CMS-7 Hex Hd Adapter 7/64 (Qty 10) | 1 | |
| 120038 | CMS-9 Hex Hd Adapter 9/64 (Qty 10) | 1 | |
| 120039 | CMS-10 Hex Hd Adapter 5/32 (Qty 10) | 1 | |
| 120040 | CMS-40 Hex Hd Adapter 1.5mm (Qty 10) | 1 | |
| 120041 | CMS-41 Hex Hd Adapter 2.0mm (Qty 10) | 1 | |
| 120042 | CMS-42 Hex Hd Adapter 2.5mm (Qty 10) | 1 | |
| 120043 | CMS-43 Hex Hd Adapter 3.0mm (Qty 10) | 1 | |
| 120044 | CMS-44 Hex Hd Adapter 4.0mm (Qty 10) | 1 | |
| 120045 | CMS-45 Hex Hd Adapter 5.0mm (Qty 10) | 1 | |
| 120069 | T-20 Torx Type Adapter (Qty 5) | 1 | |
| 120366 | CMS-3 Hex Type Adapter .050 (Qty 10) | 1 | |
| 120367 | CMS-4 Hex Type Adapter 1/16 (Qty 10) | 1 | |
| 120368 | CMS-5 Hex Type Adapter 5/64 (Qty 10) | 1 | |
| 120369 | CMS-8 Hex Type Adapter 1/8 (Qty 10) | 1 | |
| 120370 | CMS-12 Hex Type Adapter 3/16 (Qty 10) | 1 | |
| 120371 | CMS-14 Hex Type Adapter 7/32 (Qty 10) | 1 | |
| 120372 | CMS-16 Hex Type Adapter 1/4 (Qty 10) | 1 | |
| 120373 | CMS-18 Hex Type Adapter 5/16 (Qty 10) | 1 | |
| 120374 | CM-26 Sl Head Adapter 7/32 (Qty 10) | 1 | |
| 120375 | CM-19 Sl Head Adapter 3/8 (Qty 10) | 1 | |
| 120376 | CMP-33 Phil Adapter #3 (Qty 10) | 1 | |
| 120377 | CM-37 Reed & Prince Adapter (Qty 10) | 1 | |
| 120413 | T-30 Torx Type Adapter (Qty 5) | 1 | |
| 1206GS | ADAPTER SET-6 PCS | 6 | |
| 121033 | T-25 Torx Type Adapter (Qty 5) | 1 | |
| 1213655-1 | T-HEAD ADAPTER ASSEMBLY | 1 | |
| 121G875041-601 | WIRING HARNESS,PS ADAPTER-CYCLE STICK TEST BENCH | 1 | |
| 12845-564-001 | IC-600 PROGRAMMING ADAPTER | 1 | |
| 12AA221 | 8MM ADAPTER FOR MAGNETIC STAND (FOR MITUTOYO SURFTEST SJ-210 SURFACE ROUGHNESS TESTER CODE: 178-560-01D S/N: 614031811) | 1 | |
| 12BAK728 | SURFTEST SJ-210 POWER ADAPTER CORD SET | 1 | |
| 12ME65B00713 | REAR ADAPTER AND YOKE - ENGINE HANDLING | 1 | |
| 12ME65B02000 | ADAPTER - TORQUE, INBOARD TRAILING EDGE FLAP, MAIN CARRIAGE | 10 | |
| 12MIT65B00141 | MISCELLANEOUS TOOL - TORQUE TOOL ADAPTER | 4 | |
| 12MIT65B00719-9 | ADAPTER - TRQ WRENCH | 1 | |
| 12XHBU-SS | ADAPTER - PRESSURE (3/4-INCH FLARELESS FITTING AT ONE END AND 3/4-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 130-380042-1/935 | CALIBRATION ADAPTER TEST BOX (MEGGIT) MM 350 ATA 77-00-00 | 2 | |
| 132.5010 | UAS - WHEEL ADAPTER RING FOR P/N 3-1531-1/-2/-3 | 1 | |
| 132.5053 | UAS - WHEEL ADAPTER RING FOR P/N C20195152 / C20195000-3 / C20195002- 2/3 / C20195162 | 1 | |
| 132.5066 | UAS - WHEEL ADAPTER RING FOR P/N 2606735-1/-2 | 1 | |
| 132.5112 | UAS - WHEEL ADAPTER RING FOR P/N C20509000 | 1 | |
| 132.5117 | WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 132.5177 | WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 132.5275 | WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 132.5312 | WHEEL ADAPTER RING FOR 3-1720 | 1 | |
| 132.5313 | WHEEL ADAPTER RING FOR 3-1701 | 1 | |
| 134-03428-402 | TRIPOD JACK ADAPTER MAIN - RIGHT | 1 | |
| 135-03428-401 | TRIPOD JACK ADAPTER MAIN - LEFT | 3 | |
| 13ME65B00713 | TIEBAR - GROUND HANDLING ADAPTERS, JT9D POWER PLANT | 1 | |
| 13MIT65B00717 | ADAPTER - EMERGENCY JACKING, AIRPLANE RECOVERY | 1 | |
| 13MIT65B00717-M | ADAPTER -0 EMERGENCY JACKING | 1 | |
| 14-6801-0120 | TIRE BEAD BRAKER MODEL 14-6801-0120 (TRONAIR) MUST INCLUDE MLW ADAPTER RING Z-1063-17 AND NLW ADAPTER RING Z-1064-10 | 12 | |
| 14-GCM6913 | AC Adapter for U-2 Interface, Scout II, RS232C converter (24VDC 1A) | 1 | |
| 1565 | ADAPTER- OIL FILLER | 4 | |
| 16067 | ADAPTER CABLE - HD44 TO DB15, 1.5 FEET | 1 | |
| 16081 | ADAPTER CABLE - 53-PIN TO 31-PIN | 1 | |
| 140660 | 140660;ADS-B;3rd PARTY ADAPTER DRIVERS;PROGRAM | 1 | |
| 144318 | Vacuum Adapter (for CL-2000 & SS2000) | 1 | |
| 144323 | Hios Right Angle Adapter (CL, A & SS-Series) | 1 | |
| 144338 | Vacuum Adapter (for BL-5000) | 1 | |
| 144342 | Push-to-Start Adapter (CL & SS 4000 and A4500-5000) | 1 | |
| 144345 | Vacuum Adapter (for BL-3000) | 1 | |
| 144346 | Vacuum Adapter (for BL-7000) | 1 | |
| 144356 | Vacuum Adapter for VZ-Series | 1 | |
| 144365 | Hios Right Angle Adapter - 1/4 F/Hex models (for VZ1820, VZ3012, VB1820 & VB3012) | 1 | |
| 145971 | Vacuum Adapter (for NFA-Series) | 1 | |
| 145981 | Right Angle Adapter Kit (for YF-Series) | 1 | |
| 145988 | Right Angle Adapter Kit (for HF-Series) | 1 | |
| 13030002 | ADAPTER 1/2" - 3/8" | 3 | |
| 13030005 | ADAPTER 1/2"-3/4" DRIVE STAHLWILLE | 2 | |
| 145G0115-1 | TORQUE ADAPTER - VERT | 1 | |
| 14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 7 | |
| 14PF465KIT | SPLINE ADAPTER - TORQUE TUBE | 2 | |
| 14PF465TOOL | ADAPTER FLAP/SLAT DRIVELINE - FEMALE SPLINE | 8 | |
| 14PF465TOOLM | ADAPTER FLAP/SLAT DRIVELINE - MALE SPLINE | 5 | |
| 15030003 | ADAPTER 3/4" - 1/2" FOR E.C.K 17 | 3 | |
| 1509-AA-AA | ADAPTER 3/8-1/4 | 1 | |
| 1509-AAA | ADAPTER 3/8-1/4 | 1 | |
| 1565-9910 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| 1583527-1 | CCII; SA ADAPTER-6-26 & MICRO | 1 | |
| 15W1001001 | INLET LIFTING ADAPTER (E-170) | 2 | |
| 163563 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 1 | |
| 1680015818711 | ADAPTER - FORCE CHECK TOOL, RUDDER PEDAL | 1 | |
| 16A24454L1-5 | ADAPTER ASSEMBLY, PURGING - EMERGENCY POWER UNIT NITROGEN LINE | 1 | |
| 16A46196L1-1 | ADAPTER ASSEMBLY, DRAIN - FUEL TANK | 1 | |
| 16U14503-5/-801 | PITOT-STATIC ADAPTER SET | 1 | |
| 16U47001-1 | CABLE ADAPTERS - LOX QUANTITY SYSTEM | 1 | |
| 170-63080-801-11H1 | SLING ADAPTER, LEAD-ING EDGE, VERTICAL STABILIZER | 5 | |
| 173773 | ADAPTER - OXYGEN SYSTEM | 6 | |
| 173775 | ADAPTER-OXYGEN CHARGING (CREW PORTABLE) | 5 | |
| 173778 | ADAPTER-OXYGEN CHARGING (DO NOT ORDER, REPLACED BY GSB1210012) | 6 | |
| 173784 | ADAPTER - OXYGEN CHARGING | 19 | |
| 173784 (PC-1006) | ADAPTER - OXYGEN SYSTEM | 1 | |
| 178AS960 | ADAPTER, W53 AN/AWM-102 TEST SET | 1 | |
| 17A1513P01 | U-SHAPED TORQUE ADAPTER | 1 | |
| 17ME65B00713-1 | ADAPTER - NOSE COWL HANDLING, ON-WING MAINTENANCE. JT9D ENGINE | 1 | |
| 17TES0072 | ROSE ANALYSIS UNIT ADAPTER CABLE - 17TES0072 | 7 | |
| 17TES0076 | ROSE ANALYSIS UNIT - RECORDER USB FDAU SIMULATOR (RUFS) (RI) ADAPTER - 17TES0076 | 1 | |
| 17TES0200 | CVR AUDIO MONITOR ADAPTER (L-3 COMMUNICATIONS CORP.) | 1 | |
| 180501-100-0 | ADAPTER COVER-STATIC PORT | 1 | |
| 1811D403 | TESTER: PITOT,60-420KTS,50KFT, W/2 25FT HOSES & ADAPTERS | 6 | |
| 1811D405 | TESTER: PITOT,60-420KTS,35KFT, W/2 25FT HOSES & ADAPTERS | 5 | |
| 1811DA-OA | TESTER: PITOT,20-650KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 6 | |
| 1811DA0A | TESTER: PITOT,20-650KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 6 | |
| 1811GA425 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
| 1811GA445 | TESTER: PITOT,60-420KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 3 | |
| 1811GA463 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 3 | |
| 1811GA465 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 13 | |
| 1811GA625 | TESTER: PITOT,20-250KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
| 1811GA635 | TESTER: PITOT,20-250KTS,3KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
| 1811GAA0A | TESTER: PITOT,20-650KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 6 | |
| 1811HA425 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
| 1811HA435 | TESTER: PITOT,60-420KTS,3KFT/M, W/2 25FT HOSES & ADAPTERS | 3 | |
| 1811HA443 | TESTER: PITOT,60-420KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 3 | |
| 1811HA445 | TESTER: PITOT,60-420KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 8 | |
| 1811HA463 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 7 | |
| 1811HA625 | TESTER: PITOT,20-250KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 3 | |
| 1811HA645 | TESTER: PITOT,20-250KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
| 1811HA665 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 3 | |
| 18253G-05 | DAVID CLARK 18253G-05 PLUG ADAPTER, CORD ASSEMBLY | 9 | |
| 18253G-10 | ADAPTER Y-CORD | 4 | |
| 18253G-12 | CORD ASSEMBLY,ADAPTER GND-CKPT | 5 | |
| 18253G-18 | HEADSET PLUG ADAPTER (H10-66) | 3 | |
| 18253G05 | "ADAPTER - HEADSET (CONNECTOR U-92A/U TO PJ-055B/PJ-068) | 9 | |
| 1851M57P01 | ADAPTER-STARTER | 3 | |
| 186616-001 | KIT-RADS ADAPTER | 1 | |
| 18821-3 | Barfield 18821-3 Pitot Test Adapter, For Aircraft | 4 | |
| 18821-4 | Barfield 18821-4 Pitot Test Adapter, For Aircraft | 8 | |
| 18C1025 | ADAPTER, GRIND - HPTR, FWD | 1 | |
| 18C1030 | PLUG/ADAPTER SET - NO 5 BRG HOUSING | 1 | |
| 18C1052 | ADAPTER, HORIZ. BALANCE - HPTR | 1 | |
| 18C1082 | ADAPTER, HORIZONTAL BALANCE - HPT ROTOR | 1 | |
| 18C1107 | FIXTURE, ADAPTER GENSPECT HPC STG 2-7 | 1 | |
| 18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | 1 | |
| 18C1609 | ADAPTER, LOCKING - AGB | 1 | |
| 190E2G0001 | ADAPTER, LEADING EDGE SLING-VERTICAL STABILAZER | 2 | |
| 190T06260-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS | 1 | |
| 190T06260-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS- | 1 | |
| 1938155-1 | COM-11801 ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE ETHERNET SWITCH) | 1 | |
| 196-T0071-401 | ADAPTER, SHOCK STRUT - MLG | 1 | |
| 196-T0089-401 | MLG TRAILING-ARM ADAPTER | 1 | |
| 196-T0099-401 | ADAPTER, SHOCK STRUT - NLG | 1 | |
| 196T07340-401 | ADAPTER, LIFTING - APU GENERATOR | 1 | |
| 196T07750-401 | ADAPTERS SET, LEAK-AGE TEST - FIREX SYS | 1 | |
| 196T07910-401 | ADAPTER, LIFT - AFT FAIRING PYLON | 1 | |
| 1981-H-000 | GROUND CONNECTOR ADAPTER-PRESSURE | 1 | |
| 1982-H-000 | GROUND CONNECTOR ADAPTER-SUCTION | 1 | |
| 19C0021 | ADAPTER,SUPPORT/LIFT-LPC | 1 | |
| 19C0903G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR VARIBLE BYPASS VALVE (VBV) REPLACEMENT AND CHECK | 1 | |
| 19MIT65B01211-1 | TORQUE ADAPTER - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 1AE1R18685 | ADAPTER - INHIBITING | 1 | |
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | 1 | |
| 1C6167 | ADAPTER SET - ROLLER | 1 | |
| 1C6170 | ADAPTER SET, ROLLOR-POWER TURB | 1 | |
| 1C6283 | ADAPTER, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | 1 | |
| 1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C6001G01 | 1 | |
| 1C6831 | ADAPTER SET, STATIC BALANCE - PT ROTOR SUB-ASSEMBLIES | 1 | |
| 1C6833G01 | ADAPTER, STATIC BALANCE-COMPR | 1 | |
| 1C6834 | ADAPTER,STATIC BALANCE-COMPRES | 1 | |
| 1C6834G01 | ADAPTER,STATIC BALANCE-COMPRES | 1 | |
| 1C6835 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6835G01 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6836 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6836G01 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6881 | ADAPTER SET-FUEL MANIFOLD PR | 1 | |
| 1C6881G01 | ADAPTER SET-FUEL MANIFOLD PR | 1 | |
| 1C6940 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6940G01 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6941 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6941G01 | ADAPTER, STATIC BALANCE-COMP. | 1 | |
| 1C6993G02 | ADAPTER, SUPPORT - HIGH PRESSURE COMPRESSOR CASE | 1 | |
| 1C6994 | ADAPTER - SUPPORT | 1 | |
| 1C8033 | ADAPTER - DRIVE-SPLINE | 1 | |
| 1C8033G01 | Adapter, Splined - TGB, Borescope Inspection | 1 | |
| 1C8096 | ADAPTER KIT - ELECTRONIC PROTRACTOR LM2500+ AND +(G4) | 1 | |
| 1C8167G01 | ADAPTER,BALANCE-HPT ROTOR FWD | 1 | |
| 1C8208 | ADAPTER, DRIVE - GAS GENERATOR INSP. | 1 | |
| 1C8208 REV C | ADAPTER, DRIVE - GAS GENERATOR INSP. | 1 | |
| 1C8208G02 | ADAPTER - DRIVE-GAS GENERATOR INSPECTION | 1 | |
| 1C8213 | ADAPTER - LIFT - COMBUSTION LINER | 1 | |
| 1C8213G01 | Adapter, Lift - Combustion Liner DLE | 1 | |
| 1C8302 | ADAPTER ASSY - MAINT DOLLY - EXTERNAL ENGINE | 1 | |
| 1C8315G01 | FIXTURE, I/R-SPLINED ADAPTER, HP COMPRES | 1 | |
| 1C8331 | ADAPTER - MAINTENANCE CORE | 1 | |
| 1C8344 | PULLER, SHAFT- FORWARD ADAPTER | 1 | |
| 1C8344G01 | Puller Shaft - Forward Adapter, LPT | 1 | |
| 1C8440 | ADAPTER ASSY, LIFT - COMBUSTOR & STG 1 OR 2 HP TURB NOZZLE | 1 | |
| 1C8440G01 | Adapter Assy, Lift - Combustor and Stage 1 or 2 HPT Nozzle | 1 | |
| 1C8444 | ADAPTER SET - ELECTRONIC PROTRACTOR-V STTR VANE RIGGING | 1 | |
| 1C9186 | ADAPTER, SLEEVE-LP TURB ROTOR SHAFT | 1 | |
| 1C9316 | ADAPTER - SLEEVE | 1 | |
| 1C9316G01 | ADAPTER, SLEEVE - LPT ROTOR SHAFT | 1 | |
| 1C9317 | ADAPTER - SUPPORT/LIFT | 1 | |
| 1C9317G01 | ADAPTER SUPPORT/LIFT - LPC SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 1 | |
| 1C9362 | ADAPTER ASSY, LIFT-COMBUSTOR & STG 1 OR 2 HP TURB | 1 | |
| 1C9362G02 | Adapter, Lift - Combustion/Stage 1 or 2 HPT Nozzle | 1 | |
| 1C9373G01 | ADAPTER SET - PEDESTAL TURBINE, REAR FRAME | 1 | |
| 1C9375 | ADAPTER SET ASSY - SUPPORT - AIR COLLECTOR - FWD | 1 | |
| 1C9375G01 | ADAPTER SET ASSY-SUPPORT AIR COLLECTOR | 1 | |
| 1C9377 | ADAPTER SET - SUPT. | 1 | |
| 1C9377G01 | ADAPTER SET ASSEMBLY - SUPPORT LPC FORWARD | 1 | |
| 1C9378 | ADAPTER - MAINT DOLLY | 1 | |
| 1C9378G02 | ADAPTER ASSEMBLY - MAINTENANCE DOLLY | 1 | |
| 1C9393 | ADAPTER SET, PRESSURE TEST/ RIG-VIGV, VBV AND VSV | 1 | |
| 1C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 2 | |
| 1C9397G01 | HOLDER, SHIM - HP TURB PRESSURE TUBE ADAPTER | 1 | |
| 1C9449 | ADAPTERS, TEST STAND-FLOW FUEL NOZZLE | 1 | |
| 1C9458 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | 1 | |
| 1C9458G01 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | 1 | |
| 1C9609 | ADAPTER ASSY, DRIVE-REAR | 1 | |
| 1C9609G01 | Adapter Assembly, Drive - Rear | 1 | |
| 1C9626 | TORQUE ADAPTER - PRESSURE TUBE | 1 | |
| 1C9626G01 | Torque Adapter, Pressure Tube/Coupling Nut-Hpt Rotor | 1 | |
| 2-020V747-75 | PREFORMED PACKING (USE WITH ADAPTER 803213-S58-2) | 1 | |
| 2-264S604-70 | PREFORMED PACKING (USE WITH ADAPTER 803440-S58-10) | 1 | |
| 20-4502-6000 | OXIGEN PRESSURE REGULATOR (TRONAIR) & ADAPTER - OXYGEN CHARGING P/N PC-1006 | 14 | |
| 200-000-102 | ADAPTER KIT, QEC DOLLY- | 1 | |
| 2000-0154-18 | ADAPTER-CALIBRATION ARM | 1 | |
| 235.1000 | SPRING TESTER-SPRING ADAPTER (KUNZ) | 1 | |
| 2024 | ADAPTER-INST/REM, FU | 10 | |
| 20293 | ADAPTER- PRESSURE HEAD | 1 | |
| 215029 | Breakaway Adapter for MTM-15 Torque Multiplie | 1 | |
| 215030 | Breakaway Adapter for MTM-27 Torque Multiplier | 1 | |
| 231871 | PPG Semco 231871 Semi-Luer Adapter | 2 | |
| 2000435 | P180 towbar head for Piaggio P-180 Avanti aircraft. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer); Scorpion + AD-P180/MU2 adapters. | 1 | |
| 2000483 | CNA2 towbar head for Cessna Caravan (all). Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer); Scorpion + AD-CNA2/3 adapters. | 1 | |
| 2000932 | 2-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000935 | 2-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000936 | 2-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000938 | 1-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000944 | 3-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000948 | 1-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000951 | 4-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2001115 | WASTE Y-COUPLER W/ GA ADAPTER, WYE, 4-INCH.(FOR DASH-8 ATR MANUAL LAVATORY CART). | 1 | |
| 2001120 | 1-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001121 | 3-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001122 | 3-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001123 | 4-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001212 | PNEUMATIC START WYE ADAPTER (Y-ADAPTER) | 1 | |
| 2001494 | Oxygen charge adapter. JIC/AN-4 " male flared tube" connected by 1" tube with AN800-3 aircraft connection and dust cap. | 1 | |
| 2002203 | Oxygen Charge Adapter. JIC/AN-4 " Male Flared Tube" connected by 8" tube with AN800-3 Aircraft Connection. | 1 | |
| 2002205 | Oxygen Charge Adapter. JIC/AN-4 " Male Flared Tube" connected by 3" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002759 | Inflating valve adapter, without core depressing pin, 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) | 1 | |
| 2002760 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002761 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-3 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002763 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (1/8 NPTF), Outlet connection (F threads 0.305-32) | 1 | |
| 2002764 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 3" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002766 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 1" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002768 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 8" tube with AN800-3 Aircraft Connection. | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 200909-CA | ADAPTER-MLG JACK | 6 | |
| 200909CA | ADAPTER-MLG JACK | 6 | |
| 200951-A | NLG JACK ADAPTER (ALT TMHNA01-00-00) | 6 | |
| 200951A | ADAPTER-NLG JACK | 6 | |
| 200951A-REVC | ADAPTER-NLG JACK (EQ. TO TMHNA01-00-00 AND D22827000 | 1 | |
| 200X-SMA-1.25-2.5 | MICROSCOPE, FIBER INSPECTION - WITH SMA ADAPTERS | 1 | |
| 2014/00.17 | 2014/00.17;Adapter 17: DIN 47256 LSA -PC -APC | 1 | |
| 2014/00.24 | 2014/00.24;Adapter 24: SC-PC SC-APC | 1 | |
| 2014/00.26 | 2014/00.26;Adapter 26: E-2000 -PC -APC | 1 | |
| 2014/00.29 | 2014/00.29;Adapter 29: LC F-3000 -PC -APC | 1 | |
| 2026598 | OXYGEN CHARGE ADAPTER COMBO- 2500 PSI MAX- 1/4 MAL | 1 | |
| 204-92202-1 | FCAS TEST ADAPTER MX-10664/G | 1 | |
| 2078.20.10.00 | TORQUE ADAPTER TIGHTENING - METALICO | 1 | |
| 208FRDH | TORQUE ADAPTER 3/8" (5/16"-15/16") | 1 | |
| 20MIT65B01211-1 | ADAPTER WRENCH - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 2100-10 | METER - SOUND LEVEL, 40 DBC TO 140 DBC, CALIBRATOR, ADAPTER, & CASE. (QUEST TECHNOLOGIES) | 1 | |
| 21158148-003 | 21158148-003;USB External Clock Adapter Cable MSAM-V2 | 1 | |
| 21167291 | 21167291;Singlemode Adapter Module for NGC-4500 | 1 | |
| 2150/00.32 | 2150/00.32;Universal Optical Adapter: ST-Type | 1 | |
| 2150/00.50 | 2150/00.50;Universal Optical Adapter: DIN 47256-Type | 1 | |
| 2150/00.51 | 2150/00.51;Universal Optical Adapter: FC-PC FC-APC -Type | 1 | |
| 2150/00.58 | 2150/00.58;Universal Optical Adapter: SC-PC APC-Type | 1 | |
| 2151/00.32 | 2151/00.32;Adapter ST-Type Front Shell | 1 | |
| 2151/00.50 | 2151/00.50;Adapter DIN-47256 LSA-PC APC Front Shell | 1 | |
| 2151/00.51 | 2151/00.51;Adapter FC-PC FC-APC Front Shell | 1 | |
| 2151/00.58 | 2151/00.58;Adapter SC-PC SC-APC Front Shell | 1 | |
| 21940-00 | TORQUE WRENCH ADAPTER-BATTERY CAP | 1 | |
| 21A00355 | ADAPTER - WIRE PULLER (JOSLYN SUNBANK COMPANY LLC) | 3 | |
| 21A00355-1 | ADAPTER - WIRE PULLER PLIERS - SPREADER, | 1 | |
| 21C14030 | ADAPTER, HOIST - HORIZONTAL ENGINE (-39E) | 1 | |
| 21C7082G02 | ADAPTER, TRANSPORT, T-700 | 3 | |
| 21C7422G01 | ADAPTER, LOCK- | 2 | |
| 21C7439P01 | GAS GENERATOR SHAFT TIE-BOLTS RESTRAINING ADAPTER | 1 | |
| 21C7494G01 | B-SUMP PRESSURE/TEMPERATURE ADAPTER | 1 | |
| 21Y2577A | ADAPTER-SPECIAL | 2 | |
| 2210-D10-1040 | TEST ADAPTER - ADC | 1 | |
| 22112889 | 22112889;WiFi Adapter for FBP-P5000i | 1 | |
| 22150762 | 22150762;AC Power Adapter - APM-424 VX | 1 | |
| 22165793 | 22165793;Adapter; PSD30-2AF Aircraft Interface Cable | 1 | |
| 2241-C-36 | CABLE-ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 2 | |
| 2277/90.01 | 2277/90.01;SNT-121A Worldwide Compatible AC Adapter | 1 | |
| 23002223 | ADAPTER-TEST, BLEED VALVE | 2 | |
| 23003623 | ADAPTER - LIFTING, COMBUSTION LINER | 3 | |
| 23005426 | GUIDE +Ã-Ã-Ã SPUR ADAPTER, GEAR SHAFT | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | GUIDE----BEARING, SPUR ADAPTER GEARSHAFT | 5 | |
| 23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 2 | |
| 23006782 | ADAPTER-TORQUE, TURBINE ATTACH NUT, LOWER | 2 | |
| 23006783 | ADAPTER-TORQUE, TURBINE ATTACH NUT, UPPER | 2 | |
| 23006785 | INSTALLATION TOOL--PACKING, SPUR ADAPTER GEAR | 2 | |
| 23008681 | ADAPTER----OIL INLET LINE | 1 | |
| 23008682 | Adapter-Oil Outlet Line | 2 | |
| 2301/12 | 2301/12;COSA-4055 APC CWDM OSA Module with SFP Bay - SC optical adapter mounted FC enclosed | 1 | |
| 23032403 | WRENCH & HOLDER - 2ND STAGE TURBINE SPLINE ADAPTER | 2 | |
| 23033037 | HOLDER--COMPRESSOR ROTOR COUPLING ADAPTER | 1 | |
| 23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | 1 | |
| 23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
| 23051212 | Adapter-Stand | 1 | |
| 23052530 | ADAPTER, POWER-UNIT ACCESSORY-DRIVE STARTER-SHAFT DRIVE | 2 | |
| 23055299 | ADAPTER - LIFTING, EN-GINE ASSEMBLY | 7 | |
| 23055724 | ADAPTER-WRENCH. | 4 | |
| 23055729 | ADAPTER ENGINE LIFTING-AFT | 1 | |
| 23055758 | ADAPTER - AFT ENGINE HANDLING | 7 | |
| 23055759 | ADAPTER - AFT ENGINE LIFTING | 7 | |
| 23063525 | ENGINE ADAPTER - COM-PRESSOR CLEANING CART | 6 | |
| 23063525-201 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23063525-202 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23063525-203 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23066522 | ADAPTER-FWD ENGINE LIFTING | 7 | |
| 23066566 | GSE -261 FWD SUPPORT ADAPTER | 7 | |
| 23068496 | Adapter – 602 Power-Dyne Power Wrench | 1 | |
| 23068496-1 | ADAPTER - DETAIL 1 PART OF 23068496 | 1 | |
| 23068546 | ADAPTER - WRENCH, VARIABLE VANE TORQUE TUBE ASSEMBLY | 1 | |
| 2307/90.02 | 2307/90.02;UPP adapter 2.5mm type - SC/FC/ST/DIN - for OLP-8x Series OPM | 1 | |
| 2307/90.03 | 2307/90.03;UPP adapter 1.25mm type - LC/MU - for OLP-8x Series OPM | 1 | |
| 23083893 | ADAPTER: TORQUE,B-NUT | 1 | |
| 2310-T030-401 | ADAPTER - CHANGING, NLG WHEEL | 2 | |
| 2317-T020-401 | ADAPTER - CHANGING, NLG WHEEL | 2 | |
| 2327/90.01 | 2327/90.01;SCF USB WiFi-adapter | 1 | |
| 2327/90.02 | 2327/90.02;SCF USB Bluetooth-adapter | 1 | |
| 2327/90.21 | 2327/90.21;SCF WiFi-option including USB WiFi-adapter | 1 | |
| 2327/90.22 | 2327/90.22;SCF Bluetooth-option including USB Bluetooth-adapter | 1 | |
| 2344-0051-19 | MALE SQ ADAPTER 3/4 X 1-1/2 | 1 | |
| 235.1000 (KUNZ) | SPRING TESTER-SPRING ADAPTER | 1 | |
| 23D19238-1 | TOOL-ADAPTER, INFLATE/DEFLATE VALVE | 4 | |
| 240045 | PPG Semco 240045 Model 250-A Gun Handle with Adapter | 1 | |
| 247C5079 | ADAPTER - NUT - TORQUE - NO. 6 | 1 | |
| 247C5111 | TORQUE ADAPTER-COUPLING NUT | 1 | |
| 247C5185 | ADAPTER SET, AFT FLANGE - INTMD POWER TURBINE FRAME | 1 | |
| 247C5255 | ADAPTER SET - DOLLY - MANITENANCE | 1 | |
| 247C5256 | ADAPTER SET - MAINTENANCE DOLLY-IPT CASE | 1 | |
| 247C5260 | FIXTURE - FORWARD ADAPTER - REMOVAL | 1 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| 2548G-23 | ADAPTER HARNESS - BARFIELD | 1 | |
| 2550139 | Adapter-Spline | 1 | |
| 2558725 | OUTBOARD WHEEL-HALF, SUPPORT ADAPTER | 1 | |
| 2558753 | ADAPTER-SUPPORT | 1 | |
| 2558788 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 1 | |
| 2558806 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER) - CAGE: 06848 | 4 | |
| 2558807 | IB AND OB WHEEL HALF REMOVAL SUPPORT ADAPTER) - CAGE: 06848 | 3 | |
| 2558915 | ADAPTER-SUPPORT | 1 | |
| 2558917 | ADAPTER-SUPPORT | 1 | |
| 256035-PT | 256035-PT PRESSURE TRANSDUCER (OPTIONAL) PRESSURE TRANSDUCER. RANGE 0-750/1000 PSIG. INCLUDES: ADAPTER AND BRACKET . T-FITTING . HARNESS | 1 | |
| 2560872 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER) - CAGE: 06848 | 1 | |
| 2566548 | HEATED SERVO FITTING ADAPTER (AN-8 TO AN-4 REDUCER) | 1 | |
| 2566549 | AN-1 to AN-4 Fitting Adapter | 1 | |
| 2571005-001 | ADAPTER, DRIVE, ANTI-SKID TRANSDUCER | 1 | |
| 257562-58 | Adapter- Valve Test | 1 | |
| 259-202702-4-3 | COM-22906 - ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 2591553 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK | 1 | |
| 2591553-903 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK | 3 | |
| 259996-01 | DATA LOADER CABLE ADAPTER ASSY - ARINC 615/603 | 1 | |
| 25B17449-103 | ADAPTER-BOTTLE FITTI | 1 | |
| 25Y635AB | ADAPTER ASSY-FUEL DRAIN | 1 | |
| 25Y759A | ADAPTER-OIL CHARGING OLEO STRUTS | 6 | |
| 25YTS129R21A | ADAPTER - EXPANDING | 6 | |
| 25YTS303R17A | ADAPTER - FUEL FLOW | 1 | |
| 25YTS303R1A | ADAPTER - FUEL FLOW | 1 | |
| 26008573-101 | TPS SELF - TEST ADAPTER (PART OF KIT N 7 ) | 1 | |
| 27-1-4324 | ADAPTER-CLUTCH TORQUE, FLAP DRIVE UNIT | 2 | |
| 27-18-90424 | ACOUSTIC ADAPTER FOR 89-01 SERIES | 1 | |
| 27-5-4 | Adapter Dollie (A' dimension: .187") (B' dimension: 1") (C' dimension: 1/2") (D' dimension: 7/16") (Thread size: 3/8"-24) (Add to cart: Add To Cart) | 1 | |
| 27.1-4324 | ADAPTER-CLUTCH TORQUE FLAP DRIVE UNIT F50 | 2 | |
| 27F-212-35-10-0015-001 | PITOT PROBE-TO-EXTERNAL BENCH TEST ADAPTER | 1 | |
| 28-0-1067H | ADAPTER - FUSELAGE JACK, FRONT | 4 | |
| 28-0-1380 | Torque Adapter- Nose Wheel Axle Nuts | 5 | |
| 28-0-4893 | TORQUE ADAPTER SLIP-CLUTCH | 1 | |
| 28-0-5011 | SET- ADAPTER LIFT DUMPER MECHANICAL | 2 | |
| 28.0.4893 | TORQUE ADAPTER SLIP-CLUTCH | 1 | |
| 280985 | HOLDER - DRIVE ADAPTER | 1 | |
| 284357-1 | HOISTING ADAPTER SAT-1091 | 1 | |
| 287554-2 | ADAPTER-VALVE TEST | 1 | |
| 290166 | ADAPTER - VALVE TEST - ADAPTER "X" | 2 | |
| 290167 | ADAPTER-COMPONENT TEST PORT | 1 | |
| 290169 | T ADAPTER - VALVE TEST | 1 | |
| 2815121 | NI-CD BATTERIES VENT VALVE ADAPTER | 1 | |
| 290222-1 | ADAPTER - TAIL SHUTOFF VALVE ICE PROTECTION | 1 | |
| 290395-1-1 | ADAPTER - PNEUMATIC VALVE TESTER (HONEYWELL INTERNATIONAL INC, ENGINE & SYSTEMS) | 1 | |
| 290435-1-1 | R ADAPTER - VALVE TEST | 5 | |
| 291B300-005 | ADAPTER, HI-TORQUE | 1 | |
| 291B300-005A | ADAPTER, HI-TORQUE | 1 | |
| 291B300-010 | ADAPTER, HI-TORQUE | 1 | |
| 291B300-010A | ADAPTER, HI-TORQUE | 1 | |
| 291B300-015 | ADAPTER, HI-TORQUE | 1 | |
| 291B300-015A | ADAPTER, HI-TORQUE | 1 | |
| 291B300-HT3 | ADAPTER HI-TORQUE | 1 | |
| 291B300-HT4 | ADAPTER HI-TORQUE | 1 | |
| 291B300-HT5 | ADAPTER HI-TORQUE | 1 | |
| 29335501 | RADS-AT ADAPTER KIT | 1 | |
| 293477-1 | ADAPTER-TURBINE STARTER | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294863-2 | MAINTENANCE STAND ADAPTER KIT HOLDS ENGINE ASSEMBLY IN 287750-1 MAINTENANCE STAND | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | 1 | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | 1 | |
| 2C 14689G01 | ADAPTER, LIFT - COMBUSTOR | 2 | |
| 2C14040 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING NUT, HP TURB ROTOR | 1 | |
| 2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G05 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 3 | |
| 2C14040G06 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 2 | |
| 2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14073G03 | ADAPTER - COUNTER TO | 2 | |
| 2C14113 | HPC ROTOR FWD SPLINE ADAPTER REMOVAL-INST. | 1 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14178G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 2 | |
| 2C14187G01TK | ADAPTER, LIFT FAN FRAME-HORIZONTAL | 1 | |
| 2C14203 | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203 REV B | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 3 | |
| 2C14219 | ADAPTER, LIFT-COMBUSTOR & STAGE 1 OR 2 HPT NOZZLE | 1 | |
| 2C14219 REV A | ADAPTER, LIFT-COMBUSTOR & STAGE 1 OR 2 HPT NOZZLE | 1 | |
| 2C14224 | ADAPTER SET, PEDESTAL-LPT MODULE, FWD | 1 | |
| 2C14224 REV B | ADAPTER SET, PEDESTAL-LPT MODULE, FWD | 1 | |
| 2C14224G02 | ADAPTER SET - PEDESTALS LPT MODULE FWD | 1 | |
| 2C14283G02 | ADAPTER KIT, ENGINE DRY-OUT | 1 | |
| 2C14286 | ADAPTER , CABLE -HMU TO MEC ENGINGPRESERVATION UNIT | 1 | |
| 2C14286G01 | ADAPTER, CABLE - HMU TO MEC ENGINE PRESERVATION UNIT | 1 | |
| 2C14290 | ADAPTER - TORQUE | 1 | |
| 2C14635 | ADAPTER,MOTORING - CORE ENGINE | 1 | |
| 2C14635 REV C | ADAPTER,MOTORING - CORE ENGINE | 1 | |
| 2C14635G01 | ENGINE CORE MOTORING ADAPTER - CF6-80 ENGINES | 1 | |
| 2C14649 | ADAPTER, CORE MOTORING - BORESCOPE | 1 | |
| 2C14649P05 | ADAPTER - CORE ENGINE MOTORING | 1 | |
| 2C14655G03 | ADAPTER, TORX SCREW - LPT STATIONARY AIR SEAL | 1 | |
| 2C14664 | TORQUE ADAPTER SET - RET NUT | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
| 2C14685 | ADAPTER - FAN STATOR TO FAN DISK | 1 | |
| 2C14685 REV A | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | 1 | |
| 2C14685G01 | ADAPTER-ANTI-TORQUE STOP ARM | 2 | |
| 2C14686 | ADAPTER, LIFT - LP COMPRESSOR | 1 | |
| 2C14686 REV P | ADAPTER, LIFT-LOW PRESS. COMPRESSOR | 1 | |
| 2C14686G01 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G02 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G03 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G04 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G05 | ADAPTER, LIFT-LOW PR | 3 | |
| 2C14689 | ADAPTER, LIFT-COMBUSTOR | 1 | |
| 2C14689 REV E | ADAPTER, LIFT-COMBUSTOR | 1 | |
| 2C14689G01 | ADAPTER - LIFT COMBUSTOR | 2 | |
| 2C14695G01 | ADAPTER, LIFT - HPT NOZZLE, STAGE 1 | 2 | |
| 2C14703 | ADAPTER, LIFT-STAGE 2 HPT NOZZLE | 1 | |
| 2C14703 REV A | ADAPTER, LIFT-STAGE 2 HPT NOZZLE | 1 | |
| 2C14703G01 | ADAPTER, LIFT - HPT | 2 | |
| 2C14703G01TK | LIFT ADAPTER-HPT STAGE 2 NOZZLE | 1 | |
| 2C14717 | ADAPTER SET, PEDESTAL - FAN STATOR FWD | 1 | |
| 2C14717 REV A | ADAPTER SET, PEDESTAL - FAN STATOR FWD | 1 | |
| 2C14717G01 | ADAPTER SET, PEDESTAL - FAN STATOR & UNDER G/B | 4 | |
| 2C14726 | ADAPTER, PEDESTAL - ENGINE, FORWARD | 1 | |
| 2C14726G03P11 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
| 2C14726G03TK | ADAPTER, PEDESTAL-ENGINE FORWARD | 1 | |
| 2C14726G04 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 4 | |
| 2C14726G05 | ADAPTER, PEDESTAL - ENGINE, FORWARD | 1 | |
| 2C14729G01TK | ADAPTER SET, PEDESTAL-ENGINE AFT | 1 | |
| 2C14730 | ADAPTERS, PEDESTAL-COMP. STATOR FWD | 1 | |
| 2C14730 REV B | ADAPTERS, PEDESTAL-COMP. STATOR FWD | 1 | |
| 2C14737 | ADAPTER, LIFT-FAN CASE & FRAME AFT. | 1 | |
| 2C14737 REV E | ADAPTER, LIFT-FAN CASE & FRAME AFT. | 1 | |
| 2C14738 | ADAPTER, R/I - STAGE 1 FAN DISK NUTS | 1 | |
| 2C14738G01 | ADAPTER SET - INSTALL/REMOVE, STAGE 1 FAN DISK NUTS | 2 | |
| 2C14742G01 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
| 2C14742G05P48 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
| 2C14780 | ADAPTER, PEDESTAL - COMP REAR FRAME | 1 | |
| 2C14780 REV E | ADAPTER, PEDESTAL - COMP REAR FRAME | 1 | |
| 2C14780G01 | ADAPTER, PEDESTAL-CRF | 2 | |
| 2C14780G02 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME | 2 | |
| 2C14793 | ADAPTER, LOCKING - CORE ENGINE | 1 | |
| 2C14795 | ADAPTER, LIFT-ENGINE AFT | 1 | |
| 2C14795 REV A | ADAPTER, LIFT-ENGINE AFT | 1 | |
| 2C14827 | ADAPTER SET,PEDESTAL-ENGINE | 1 | |
| 2C14854G02 | ADAPTER - TORQUE | 3 | |
| 2C14856 | ADAPTER SET, SPANNER - AIRTUBE NUTS | 1 | |
| 2C14900G01 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE | 1 | |
| 2C14903G01 | ADAPTER,BAL 3-9 SPOOL (AFT) AND 11-14 SP | 1 | |
| 2C14922G01 | ADAPTER,BALANCE-LPT MODULE | 1 | |
| 2C14923P03 | ADAPTER,BALANCE-LPT ROTOR,STAGE 1 | 1 | |
| 2C18020G02 | ADAPTER, ANTI-TORQUE | 1 | |
| 2C18044 | ADAPTER SET ASSYPEDESTAL-COMPRESSOR REAR FRAME | 1 | |
| 2C18044G01 | ADAPTER SET ASSEMBLY, PEDESTAL - CRF | 1 | |
| 2C5196 | ADAPTER - WRENCH-#6 BRG LKNT | 1 | |
| 2C5210G01 | ADAPTER - HOISTING | 1 | |
| 2C5243P01 | ADAPTER - LUBE TANK DRAIN | 1 | |
| 2C5275G01 | ADAPTER - LPT HOIST | 1 | |
| 2C5611G01 | ADAPTER - HOIST COMP ROTOR | 1 | |
| 2C5650G01 | ADAPTER - HPT BLADE | 1 | |
| 2C5653G01 | ADAPTER - COMB MODULE HOIST | 1 | |
| 2C5838G01 | ADAPTER - TORQUE FUEL MANIFOLD | 1 | |
| 2C5883G01 | ADAPTER - GRINDER - HPT | 1 | |
| 2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR & OIL SEAL | 2 | |
| 2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | 1 | |
| 2C6047 | PULLER, ADAPTER - NO.4 BRG INNER RACES & FWD SEAL | 2 | |
| 2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | 1 | |
| 2C6048 | PULLER, ADAPTER - AFT AIR SEAL & SPLIT NUT SPANNER | 2 | |
| 2C6048G01 | PULLER ADAPTER-AIR SEAL AND | 1 | |
| 2C6049 | PULLER ADAPTER-ROTATING AIR | 1 | |
| 2C6049G01 | PULLER ADAPTER-ROTATING AIR | 1 | |
| 2C6084 | ADAPTER, TORQUE - RETAINING NUT, BRG 5 | 1 | |
| 2C6084G03 | ADAPTER, TORQUE - RET NUT, BRG 5 | 1 | |
| 2C6105 | ADAPTER,DRIVE-TURBINE REVERSER GEARBOX | 1 | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C6359G01TK | ADAPTER, PEDESTAL-ENGINE FORWARD | 1 | |
| 2C6360G01 | ADAPTER, PEDESTAL-COMPRESSOR STATOR, FORWARD | 2 | |
| 2C6361G01TK | ADAPTERS, PEDESTAL COMP. STATOR-FWD. | 1 | |
| 2C6363G01 | ADAPTERS, PEDESTAL - FAN MIDSHAFT | 1 | |
| 2C6363G01TK | ADAPTERS, PEDESTAL-FAN MID SHAFT | 1 | |
| 2C6627 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C6627G01 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C6827 | ADAPTER, ASSY - LP COMPRESSOR | 1 | |
| 2C6834 | ADAPTER, ANTITORQUE - FAN STATOR TO DISK | 1 | |
| 2C6888G03 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE AND BLAD | 1 | |
| 2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | 1 | |
| 2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | 1 | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C7140G01 | ADAPTER SET-COMPRESSOR ROTOR | 1 | |
| 2C8064G01 | SPLINE ADAPTER INSPECTION GONO-GO GAGE | 2 | |
| 2C8084 | ADAPTER KIT,ENGINE START CART-LUBE/SCAVENGE PUMP | 1 | |
| 2C8094 | ADAPTER, GRINDING-HP TURB ROTOR | 1 | |
| 2C81000 | ADAPTER, HOIST - ENGINE | 1 | |
| 2C81007G03 | ADAPTER, HOIST - ENGINE | 4 | |
| 2C81017G01 | BUILD-UP STAND ADAPTER | 1 | |
| 2C81037G01 | ADAPTER - HPT/LTP COMBUSTION HOIST | 1 | |
| 2C81039G01 | ADAPTER - HPT MODULE LIFT AND TURN | 1 | |
| 2C81040G01 | ADAPTER, COMBUSTION LINER - GUIDE/HOIST (LINER GUIDE/HOIST ADAPTER) | 1 | |
| 2C81040G02 | ADAPTER, HOIST/GUIDE-COMBUSTION LINE | 1 | |
| 2C81043G01 | ADAPTER, HOIST-LPT MODULE (HOIST ADAPTER) | 2 | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT | 2 | |
| 2C81050G01 | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE | 3 | |
| 2C81062 | ADAPTER HOIST-ENGINE/INNER FRAME | 1 | |
| 2C81062G02 | ADAPTER, HOIST - ENGINE/INNER FRAME (E175) | 1 | |
| 2C81080G01 | ADAPTER - MAIN MOUNT - COMBUSTI | 1 | |
| 2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | 1 | |
| 2C81114G01 | ADAPTER, HOIST-FAN ROTOR | 1 | |
| 2C81178G03 | ADAPTER, TORQUE - NO. 3 BEARING LOCK | 1 | |
| 2C81302G02 | ADAPTER, HOIST-STAGE 1 NOZZLE | 1 | |
| 2C81307G01 | ADAPTER, HOIST - COMBUSTION CASING | 1 | |
| 2C81407 | HPT, LOCKNUT-TORQUE ADAPTER | 1 | |
| 2C81407G04 | HPT, LOCKNUT-TORQUE ADAPTER | 1 | |
| 2C81416G01 | ADAPTER, HOIST - HPT ROTOR LIFT AND TURN (ROTOR HOIST ADAPTER) | 1 | |
| 2C81445G01 | ADAPTER, TORQUE - HPT ROTOR JOINT | 1 | |
| 2C81446G01 | ADAPTER,WRENCH ARC-HPT ROTOR | 1 | |
| 2C81458G01 | ADAPTER, TORQUE, BALANCE - HPT ROTOR | 1 | |
| 2C81463 | ADAPTER, HIGH TORQUE - HPT LOC | 1 | |
| 2C81463G01 | ADAPTER, TORQUE - HPT LOCKNUT (TORQUE ADAPTER) | 1 | |
| 2C81463G02 | ADAPTER, TORQUE - HPT LOCKNUT | 1 | |
| 2C81464 | ADAPTER TORQUE - HPT LOCKNUT | 1 | |
| 2C81464G01 | ADAPTER, TORQUE - HPT LOCKNUT | 1 | |
| 2C81482G01 | ADAPTER, LIFT/TURN - HPT ROTOR | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81601G01 | ADAPTER, HOIST - AGB | 2 | |
| 2C81625P01 | ADAPTER-TORQUE, LOCKNUT, (TORQ | 1 | |
| 2C81652G01 | ADAPTER, INSTALLER - BEARING, AXIS-B | 1 | |
| 2C81653G01 | ADAPTER, INSTALLER - BEARING, AXIS-D | 1 | |
| 2C81660G01 | ADAPTER, REMOVAL, AXIS-G FRONT | 1 | |
| 2C81962G01 | ADAPTER, HOIST - STAGE 1-2 BLISK, HPC ROTOR | 1 | |
| 2C90918G01 | ADAPTER - PLASMA SPRAY | 1 | |
| 2C91000G01 | STAND - ADAPTER | 1 | |
| 2C91002 | ADAPTER, ON-WING MAINTENANCE | 1 | |
| 2C91002G01 | ADAPTER - ON WING MX | 1 | |
| 2C91003G01 | ADAPTER - HOIST | 1 | |
| 2C91004G01 | ADAPTER - ROTOR TRUNION | 1 | |
| 2C91006G01 | ADAPTER - TRUNION | 1 | |
| 2C91033 | ADAPTER - HOIST LPT ROTOR | 1 | |
| 2C91033G01 | ADAPTER - LPT HOIST | 1 | |
| 2C91035G02 | ADAPTER - HPT HOISTING | 1 | |
| 2C91046G01 | ADAPTER, HOIST - COMPRESSOR | 1 | |
| 2C91050G01 | ADAPTER - FAN SHAFT | 1 | |
| 2C91065G01 | ADAPTER - HOIST/PILOT | 1 | |
| 2C91067G01 | ADAPTER - ENGINE HOIST | 1 | |
| 2C91071 | ADAPTER, BORESCOPE-IGN PORT | 1 | |
| 2C91071G01 | ADAPTER-IGNITER PORT BOR. | 4 | |
| 2C91073G01 | ADAPTER - LPT HOIST | 1 | |
| 2C91074G01 | ADAPTER - FAN DRIVE SHAFT | 1 | |
| 2C91076G01 | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR | 1 | |
| 2C91082P01 | ADAPTER - COMPRESSOR ROTOR | 1 | |
| 2C91086G01 | ADAPTER - FWD ENG. SUPPORT | 1 | |
| 2C91102G01 | ADAPTER - HPT SPANNER | 1 | |
| 2C91109G01 | ADAPTER -HPT HORIZONTAL HOISTING | 1 | |
| 2C91125G01 | ADAPTER-SPANNER LOCKNUT | 1 | |
| 2C91169G01 | ADAPTER-TORQUE LOCKNUT | 1 | |
| 2C91182G01 | ADAPTER-PNEUMATIC | 1 | |
| 2C91183 | ADAPTER - TORQUE | 1 | |
| 2C91183G01 | ADAPTER-TORQUE LPT NUT | 1 | |
| 2C91185 | ADAPTER-BAL-STATIC-STG 3 - 4 - 5 | 1 | |
| 2C91191G01 | ADAPTER-TORQUE | 1 | |
| 2C91195G01 | ADAPTER, HOIST-FRONT COMPRESSOR | 1 | |
| 2C91209G01 | ADAPTER-FAN ROTOR HOUSING | 1 | |
| 2C91217G01 | ADAPTER-TORQUE-LOCKNUT | 1 | |
| 2C91236G01 | ADAPTER-HOIST-ROTOR LPT | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2F10366 | Adapter, Airflow (Outlet) - Engine Assy, No. 5 Brg. Compartment Cover, Installation & Oil Scavenget Outer, TEC | 1 | |
| 2G7899 | ADAPTER - STARTER DRAIN | 8 | |
| 2ME65B40005 | ADAPTER - AIR CYCLE MACHINE INSTALLATION AND REMOVAL | 1 | |
| 2ME65B40006 | ADAPTER - THRUST RECOVERY VALVE AND HEAT EXCHANGER, REMOVAL AND INSTALLATION | 9 | |
| 2ME65B89603 | ACCESSORY ADAPTER - HOIST SYSTEM RB211-524 AND CF6-50 ENGINES | 3 | |
| 2ME65B94600 | AFT MOUNT ADAPTER - GE LIFT FIXTURE, CF6-50 ENGINE | 1 | |
| 2MIT1A264-0281-1 | ADAPTER PLATE - 120 GALLON TANK | 4 | |
| 2MIT2A264-0812 | ADAPTER PLATE-PORTABLE WATER TANK | 1 | |
| 2MIT2A264-0812-1 | ADAPTER PLATE - 40 TO 65 GALLON TANK (737NG ALL, 767 OPTIONAL AUX TANK SEE OPTIONS BELOW) (YOKOHAMA AEROSPACE AMERICA) | 5 | |
| 2MIT65-27535 | TORQUE ADAPTER-AILERON CONTROL COLUMN,CAPTAINS | 1 | |
| 2MIT65-45109-22 | MISC. TOOL ADAPTER -0 ENGINE UNIVERSAL PROTCR | 6 | |
| 2MIT65B01202 | WRENCH ADAPTER - GLAND NUT, NOSE GEAR | 8 | |
| 2MIT65B01202-1 | Wrench adapter-gland nut，nose gear | 1 | |
| 2MIT65B01203 | TORQUE ADAPTER - RETAINER NUT, BODY LANDING GEAR TRUNNION | 2 | |
| 2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | 1 | |
| 2MIT65B01502 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 2 | |
| 2MIT65B01504-1 | TORQUE ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| 2MIT65B40500-1 | ADAPTER ASSEMBLY - LAMB AIR MOVER, HORIZONTAL STABILIZER | 1 | |
| 2MIT65B40719 | ADAPTER, OIL FILL - CONSTANT SPEED DRIVE (CSD) | 2 | |
| 2MIT65B80307 | ADAPTER - PROTRACTOR CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 1 | |
| 2MIT65B81129 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER | 2 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 2MIT65B82106 | TORQUE WRENCH ADAPTER - AILERON CONTROL | 1 | |
| 2MIT65B82215 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER, AILERON FORCE LIMITER | 2 | |
| 2MIT65B82585 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 1 | |
| 2MIT65B90115 | ADAPTER - OIL SYSTEM DIFFERENTIAL PRESSURE SWITCH, RB211 ENGINE | 1 | |
| 2OHME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 5 | |
| 2PME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 7 | |
| 2TE60B40037-1 | CABLE ADAPTER -0 TRW/CINCH | 1 | |
| 2TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| 2TE65B00776-1 | Harness -Calibration Adapter. Fuel Quantity Indicator 1 & 4. Main Tanks | 1 | |
| 2TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | 1 | |
| 2TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | 1 | |
| 2TE65B80562 | TEST ADAPTER - DRIVE MECHANISM, STABILIZER TRIM | 1 | |
| 2TSJ65B01504-1 | TEST ADAPTER - VENT VALVE, TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 1 | |
| 2TSJ65B40700 | ADAPTER - TEST CABLE, DATA SIGNAL DISPLAY UNIT | 1 | |
| 3-1560 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 21 X 7.25 - 10 | 1 | |
| 3-1609-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 13.461 - 13.466 (341,91 - 342,04) | 1 | |
| 3-1610-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 7.968/7.990 (202,39 - 202,95) | 1 | |
| 300279-100 | ADAPTER-VALVE | 3 | |
| 3008-550 | ADAPTER-ACCESS PANEL LEVERAGE | 2 | |
| 301-547-206-0 | CFM56-5A/5B ENGINE BOTTLE ADAPTER QTY 2 | 1 | |
| 3076/57.45 | 3076/57.45;QSFP-DD Loop Adapter | 1 | |
| 3076/96.44 | 3076/96.44;CFP8 8x50G PAM-4 Electrical Adapter | 1 | |
| 3076/96.45 | 3076/96.45;CFP8 to QSFP-DD 8x50G PAM-4 Adapter | 1 | |
| 3076/96.46 | 3076/96.46;CFP8 to OSFP 8x50G PAM-4 Adapter | 1 | |
| 30MIT65B00112 | ADAPTER ASSEMBLY - JACKING, OUTBOARD WING BBL 932.6 | 10 | |
| 31-0008-04 | CA-420C ADAPTER KIT 8.5 | 1 | |
| 310077 | Vacuum Adapter (for 4mm D-Cut Dr, M20) | 1 | |
| 314150 | Adapter, Flush Type - Alemite Midget | 10 | |
| 31505-4 | ADAPTER CABLE 1FT ARINC 603 31505-4 | 7 | |
| 31509-1 | ADAPTER CABLE - ARINC 615 PORTABLE DATA LOADER (PDL) TO ACARS-MU | 1 | |
| 31530-2 | ADAPTER CABLE - ARINC 615 PORTABLE DATA LOADER (PDL) TO AIRBORNE DATA LOADER (ADL) CABLE | 2 | |
| 320008B-S0 | ADAPTER-SAMPLE FUEL | 3 | |
| 3218AS551-1 | SERVICE ADAPTER, PRESSURE, T-3 | 1 | |
| 3218AS551-2 | SERVICE ADAPTER, PRESSURE, T-5 | 1 | |
| 3218AS552-1 | RETURN ADAPTER, T-3 | 1 | |
| 3218AS552-2 | RETURN ADAPTER, T-5 | 1 | |
| 3244-TST | ADAPTER (CMM 38-32-04) (ATR) | 1 | |
| 3281AS100-1 | ADAPTER SET, PITOT-STATIC | 1 | |
| 330-024 | FEED-THRU BULKHEAD JACK ADAPTER, 5 | 1 | |
| 3300264-6001 | ADAPTER SET, TEST (M0D-A) | 1 | |
| 332A91-4105-02 | JACK-ADAPTER PAD MAIN LANDING GEAR | 1 | |
| 332A91410502 | JACK-ADAPTER PAD MAIN LANDING GEAR | 1 | |
| 334010SAS-125-4 | Static Test Adapter - Boeing 717 | 2 | |
| 33410FFAB-125-4 | ADAPTER - STATIC TEST | 8 | |
| 33410FFAB125-4 | Barfield 33410FFAB125-4 Static Test Adapter, For Fixed Wing Aircraft | 8 | |
| 33410HB-125 | Barfield 33410HB-125 Static Test Adapter, For Aircraft | 4 | |
| 33410HH-125-4 | Static Test Adapter - ATR42, ATR72, ATR42-500 | 8 | |
| 33410HH125-4 | Barfield 33410HH125-4 Static Test Adapter, For Aircraft | 8 | |
| 33410LH-125-4 | ADAPTER - STATIC TEST | 21 | |
| 33410LH125-4 | Barfield 33410LH125-4 Static Test Adapter, For Boeing Aircraft | 21 | |
| 33410LH1254 | STATIC TEST ADAPTER - ATR42, ATR72, ATR42-500 | 21 | |
| 33410M-125-4 | ADAPTER - PPRV REMOTE STATIC PORT (PART SPL-6692) | 9 | |
| 33410MC-125-4 | ADAPTER - PPRV REMOTE STATIC PORT (PART OF SPL-6692) (GDC10105) | 2 | |
| 33410S70-4 | Barfield 33410S70-4 Static Test Adapter | 6 | |
| 33410SAS-90-4 | ADAPTER - STATIC TEST | 7 | |
| 3343090F | ADAPTER - PRESSURE TEST | 1 | |
| 33455M70-4 | Barfield 33455M70-4 Static Test Adapter, For Bell Aircraft | 4 | |
| 3400A0000-01W01 | ADAPTER, MANUAL AC-TUATION | 1 | |
| 3402244-1 | ADAPTER (AIR COND) C-130 74 "H" MODELS | 1 | |
| 3402779-1 | ADAPTER ASSY, STATIC PORT ALT PN 386-40-1 | 1 | |
| 3402822-1 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
| 3402822-3 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
| 3402822-5 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
| 3410M-125-4 | ADAPTER - PPRV REMOTE STATIC PORT | 1 | |
| 34130011-01 | ADAPTER # ADAPTOR-CHARGING,PITOT PR | 1 | |
| 347-3001-14GSE | ADAPTER, PRESSURE RELIEF DOOR-ENGINE | 2 | |
| 34L4801 | ADAPTER -IBM 16/4 TOKEN RING CARDBUS | 1 | |
| 34ME65B00713-1 | REAR ADAPTER - CORE ENGINE, JT9D | 1 | |
| 35 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 1 | |
| 3511-180-45161 | ADAPTER-DRIVING | 1 | |
| 351GSE3008-901 | ADAPTER-DOOR LATCHES | 1 | |
| 35M50170000 | ADAPTERCABLE-ARINC TEST | 1 | |
| 35M5M01160001 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 2 | |
| 35ME65B00713-1 | FRONT ADAPTER - JT9D CORE ENGINE | 1 | |
| 360-02971-200 | ADAPTER CABLE - DMU | 2 | |
| 360-02971-400 | ADAPTER CABLE - DMU | 2 | |
| 361-040-001 | GTF-2 TEST SET ADAPTER | 1 | |
| 36122 | ADAPTER-PITOT PROBE | 18 | |
| 362-04180A | TORQUE - ADAPTER, | 1 | |
| 362-1775 | ADAPTER-EXTENSION TUBE | 1 | |
| 369D29826 | 4 BLADE TAIL ROTOR NUT #369D21716-5 TORQUE WRENCH ADAPTER | 1 | |
| 36MIT65B00141 | JACK ADAPTER - FORWARD BODY | 9 | |
| 36MIT65B00141-1 | JACK ADAPTER -0 NOSE | 4 | |
| 36MIT65B00141-201 | Jack adapter-forward body | 1 | |
| 37-258501-10 | Hi-Pot Adapter | 1 | |
| 373RB | ADAPTER - HYDRAULIC FLUID (SAFE-COR TOOLS) | 2 | |
| 3771489-1 | Adapter assy-drum.aileron torque tube | 3 | |
| 38-162-01 | SENSOR-TESTER ADAPTERS | 1 | |
| 381-142735-01 | HI-POT TESTER ADAPTER | 1 | |
| 3840-727-M-F-1 | ADAPTER MAIN 3-1306-1 | 1 | |
| 3840-727-N-F-1 | ADAPTER NOSE 3-1070 | 1 | |
| 390-810000/928 | JACK ADAPTER-MAIN LDG GEAR | 2 | |
| 3916731-507 | ANTI-SKID RETAINER NUT ADAPTER | 3 | |
| 3916732-1 | Spanner - Transducer Adapter, Anti-skid | 1 | |
| 3916732-501 | Spanner - Transducer Adapter, Anti-skid | 1 | |
| 3916732-503 | SPANNER -0 TRANSDUCER ADAPTER | 9 | |
| 3916732-505 | Spanner - Transducer Adapter, Anti-skid | 1 | |
| 3916752-501 | ANTI-SKID TRANSDUCER ADAPTER SPANNE | 1 | |
| 3956572-1 | Adapter - NLG Nitrogen Service | 7 | |
| 3961919-1 | Adapter-Torque Auto Throttle Disconnect Switch | 1 | |
| 3981305-1 | Adapter - MLG Axle Nut | 4 | |
| 3981308-1 | Adapter - A/S Transducer Spinner | 5 | |
| 3G1205G00131 | ADAPTER KIT, HELICOPTER SERVICING (BC-01-00) | 1 | |
| 3G2505G00231 | ADAPTER, RESCUE HOIST OPERATOR CONTROL (FD-03-00) | 1 | |
| 3G2905G00132 | PCM ADAPTERS KIT, HYDRAULIC SYSTEM TEST BENCH (GF-40-00) | 1 | |
| 3G6205G09031 | TROLLEY ADAPTER, M/R HEAD SUPPORT (HE-19-00) | 1 | |
| 3G6205G09132 | TROLLEY ADAPTER, SWASHPLATE SUPPORT (HE-20-00) | 1 | |
| 3G6405G05431 | TROLLEY ADAPTER, T/R HEAD SUPPORT (HE-21-00) | 1 | |
| 3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
| 3MIT65B00772 | Adapter- Hose, Sump Drain Valve. | 2 | |
| 3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 11 | |
| 3MIT65B03670 | ADAPTER - SAFETY ROD, HORIZONTAL STABILIZER ACTUATOR | 5 | |
| 3MIT65B04008-12 | SPLINE ADAPTER -0 | 1 | |
| 3MIT65B40500-1 | ADAPTER ASSEMBLY - LAMB AIR MOVER, FUEL TANK | 6 | |
| 3MIT65B40627 | ADAPTER - TORQUE, WEIGHT AND BALANCE TRANSDUCERS | 1 | |
| 3MIT65B80307-1 | ADAPTER - CONTROL COLUMN ASSEMBLY PROTRACTOR | 7 | |
| 3MIT65B80713 | MISCELLANEOUS TOOL AIR MOTOR - STABILIZER JACKSCREW ADAPTER | 3 | |
| 3MIT65B82585 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
| 3SF5923-501 | Kit-Pitot Static Adapter | 1 | |
| 3SF5940-101 | ADAPTER FOR TM20-6084 | 1 | |
| 3TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| 3TE65-73762 | JACKING ADAPTER -0 NOSE GEAR INST’L | 3 | |
| 3TE65B00776-1 | Harness -Calibration Adapter. Fuel Quantity Indicator 1 & 4 Reserve Tanks | 1 | |
| 3TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | 1 | |
| 3TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | 1 | |
| 3TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | 1 | |
| 3TSJ60B00002 | ADAPTER - TILT TABLE, INERTIAL NAVIGATION SYSTEM (INS) UNIT | 1 | |
| 4,6E 08 | MLG ADAPTER-TORQUE | 1 | |
| 4-10XHU6-SS MS33514 | ADAPTER - PRESSURE (7/8-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-8XHU6-SS MS33514 | ADAPTER - PRESSURE (3/4-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-M10X1F80X-S | ADAPTERS METRIC MALE M10X1 - 7/16X20 | 1 | |
| 400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER | 1 | |
| 402-090.01 | 402-090.01;QSFP-DD 8x50G PAM-4 Electrical Adapter | 1 | |
| 402-090.02 | 402-090.02;QSFP56 4x50G PAM-4 Electrical Adapter | 1 | |
| 402-090.03 | 402-090.03;QSFP-DD 4x100G PAM-4 Electrical Adapter | 1 | |
| 403475 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
| 403561 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
| 407-210-005-101 | ADAPTER ASSEMBLY (407-210-005-101) | 1 | |
| 407-MR-F-01 | ANTI-TORQUE ADAPTER | 1 | |
| 407243-1 | ADAPTER-OXYGEN REFIL | 11 | |
| 409 6620-239 | CF34-8 ENGINE STAND REAR ADAPTER. | 1 | |
| 41035G-02 | ADAPTER CORD WITH PJ-051 JACK | 3 | |
| 41090G-15 | 41090G-15 CHARGER ADAPTER CORD 230 VAC | 2 | |
| 4158AS1122 | ADAPTER ARN-147 | 1 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| 420406 | ADAPTER 3/4”M-1/2”F | 1 | |
| 4127330 | ADAPTER - VENT AND DRAIN VALVE, APU | 4 | |
| 4240-401 | ADAPTER KIT - RADIO FREQUENCY | 3 | |
| 440Y3 | Test Adapter for 980L-1 / 1A | 2 | |
| 4507100101-003 | ADAPTER ASSY, JACK-WING | 2 | |
| 4507100101-005 | Wing Jack Adapter with Tie-Down | 6 | |
| 4507100101-007 | ADAPTER ASSY, JACK-WING | 4 | |
| 4507100104-001 | Nose Jack Adapter Tie-Down | 3 | |
| 453-4010 | ELT DGL-1 PROGRAMING ADAPTER | 1 | |
| 45A99147-001 | AXLE JACK ADAPTER (T-1) | 4 | |
| 460002502 | CHARGING ADAPTER - MLG A320NEO | 10 | |
| 460004459-5 | ADAPTER-TEST | 5 | |
| 460004459-6 | ADAPTER-TEST | 5 | |
| 460004459/5 | ADAPTER-TEST | 5 | |
| 460004459/6 | ADAPTER-TEST | 5 | |
| 4916706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 460004750 | ADAPTER - TORQUE LOADING | 2 | |
| 460004787 | ADAPTER - SPANNER | 1 | |
| 460006201 | ADAPTER- TURNING TUBE CAP | 2 | |
| 460006228 | ADAPTER-TORQUE | 14 | |
| 460006229 | ADAPTER-TORQUE | 2 | |
| 460006232 | LOAD CELL AND ADAPTER - MLG A320NEO | 3 | |
| 460006233 | PRESS ADAPTER - MLG A320NEO | 4 | |
| 460006234 | OFFSET ADAPTER - MLG A320NEO | 4 | |
| 460006404 | ADAPTER - TORQUE | 17 | |
| 460006487 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460006489 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006490 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006591 | ADAPTER-BOGIE MOUNTING | 1 | |
| 460007156 | ADAPTER, CHARGING - MLG | 12 | |
| 460007196 | Torque Adapter- | 5 | |
| 460007229 | ADAPTER - TORQUE | 9 | |
| 460007230 | ADAPTER-TORQUE A320 | 28 | |
| 460007260 | BOTTOM PRESS ADAPTER - MLG A320NEO | 1 | |
| 4309901280 | ADAPTER-NLG AXLE TRANSMISSION SPNUT | 1 | |
| 460007035-3 | ADAPTER-TEST | 1 | |
| 46E08 | MLG ADAPTER-TORQUE | 1 | |
| 47001-001-000 | Adapter for CFM56-5A/B/C | 1 | |
| 47001-008-000 | CF6-80C2 PEDESTAL ADAPTER KIT | 1 | |
| 47001-029-000 | CFM56-7 ENGINE PEDESTALS ADAPTER | 1 | |
| 47001-031-000 | Pedestal AdapterSet for LEAP-1B Engine | 1 | |
| 4757T122 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;3900 | 1 | |
| 4757T123 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;3200 | 1 | |
| 4757T124 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;3200 | 1 | |
| 4757T125 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/4 MAX PSI;2600 | 1 | |
| 4757T126 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;2600 | 1 | |
| 4757T164 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/8 MAX PSI;3200 | 1 | |
| 4757T166 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-3/8 MAX PSI;3900 | 1 | |
| 4757T167 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/2 MAX PSI;3200 | 1 | |
| 4800-31 | HAZET UNIVERSAL ADAPTER 4800-31 | 1 | |
| 4916701-1 | Adapter assy-jack，fuselage | 9 | |
| 4916702-501 | Adapter assy-jack，wing | 10 | |
| 4916706 REV P | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 4916706-521 | Adapter-torque，main landing gear axle nut | 1 | |
| 4916706-527 | Adapter - Torque, MLG Axle Nut | 5 | |
| 4916706-529 | ADAPTER-TORQUE，MAIN LANDING GEAR AXLE NUT | 5 | |
| 4916706-531 | Adapter-torque，main landing gear axle nut | 2 | |
| 4916745-501 | Adapter-torque，main gear door cylinder jam nut | 8 | |
| 4916759-501 | Adapter - Torque, MLG | 1 | |
| 4916764-501 | Adapter-torque.n.g.retract a | 3 | |
| 4916776-501 | ADAPTER ASSY - NLG | 9 | |
| 4916787-1 | TORQUE ADAPTER - PASSENGER DOOR | 6 | |
| 4916790-1 | Adapter-torque restrictor support,NLG | 5 | |
| 4916795-509 | ADAPTER - STRUT NUT | 4 | |
| 4916799-501 | Adapter-Torque, Slat Cyl Jam | 2 | |
| 4936K415 | BSPP MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;5500 | 1 | |
| 4936K418 | BSPP MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;4500 | 1 | |
| 4936K419 | BSPP MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;4500 | 1 | |
| 4936K428 | BSPP MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;3500 | 1 | |
| 4936K437 | BSPP MALE ADAPTER PIPE SIZE;A-1 B-3/4 MAX PSI;3000 | 1 | |
| 4936K715 | BSPT MALE ADAPTER PIPE SIZE;A-1/8 B-1/4 MAX PSI;5500 | 2 | |
| 4952591 | Adapter-torque，main landing gear wheel bolt | 1 | |
| 4920010918719 | PSD-90 F-15 ADAPTER KIT | 1 | |
| 49I6706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 4A3844-9 | ADAPTER, TRANSDUCER (-16) | 1 | |
| 4MIT65B00732 | ADAPTER - SOCKET DRIVE | 2 | |
| 4MIT65B00772 | ADAPTER - WRENCH, SUMP DRAIN VALVE | 11 | |
| 4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
| 4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| 4MIT65B04008 | LUBE ADAPTER SET - FLAP TRAILING EDGE TORQUE TUBE COUPLINGS | 8 | |
| 4MIT65B04008-19 | ADAPTER-LUBE | 1 | |
| 4MIT65B04308 | TORQUE ADAPTER - CARGO DOOR MECHANISM | 4 | |
| 4MIT65B80307-1 | ADAPTER EQUIPMENT - CONTROL WHEELS | 32 | |
| 4MIT65B82106 | TORQUE WRENCH ADAPTER - LOAD LIMIT AILERON CONTROL | 1 | |
| 5-2869 | LEVERAGE ADAPTER - ACCESS PANEL | 1 | |
| 5000249902 | POWER ADAPTER NO.2 GTM96600-6024-T2A | 1 | |
| 501-1873-01 | ADAPTER FOR BC-815 | 2 | |
| 5012373 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS H27 X 8.5 -14 | 1 | |
| 5020-1 | REFILL ADAPTER AVOX PN: 5020-1 | 2 | |
| 505T06280-401 | ADAPTER - TEST WHEEL SPEED TRANSDUCER | 1 | |
| 506-23-1 | TRIPOD JACKS - ADAPTER (CAP) | 1 | |
| 506-23-2 | TRIPOD JACKS - ADAPTER (CAP) | 1 | |
| 507.20.12.050 | PC-12 SINGLE POINT NOSE LANDING GEAR JACK ADAPTER | 1 | |
| 507.20.12.051 | PC-12 MLG JACK ADAPTER | 1 | |
| 50874 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | 1 | |
| 508747 | ADAPTER-PROBE PITOT STATIC | 2 | |
| 508747 (SUP. 53949) | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) (PART# 508747, SUP. 53949) | 1 | |
| 509767 | ADAPTER - PITOT TEST | 1 | |
| 509767/884EH/84EH-3/CSA77700HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 5098T02G01 | HOIST ADAPTER - GENERAL PURPOSE | 1 | |
| 50MIT65B00112 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 9 | |
| 5100DA0002-1 | ADAPTER - LOAD CELL TO NLG AXEL | 1 | |
| 5120-01-144-5533 | ADAPTER MECHANICAL PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| 51268-1701-0102 | ADAPTER CABLE - FQIS TESTER INTERFACE CARD | 1 | |
| 513.34.09.011 | ADAPTER-KIT, STATIC PORT | 1 | |
| 515501 | ADAPTER _FOR SUP-PORT BRACKET | 1 | |
| 52101050 | 7750-1-MOUNTING ADAPTER FOR 7750 DISP | 1 | |
| 52343A0659-01 | ADAPTER-R H | 1 | |
| 5268-C-12 | CABLE - ADAPTER TWO SINGLE BANANA PLUG | 1 | |
| 5268-C-24 | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 1 | |
| 5268-C-36 | TWO SINGLE BANANA PLUGS TO BNC MALE CABLE - ADAPTER | 2 | |
| 5268-C-48 | CABLE - ADAPTER TWO SINGLE BANANA PLUG | 1 | |
| 5268-C-60 | CABLE - ADAPTER TWO SINGLE BANANA PLUG | 1 | |
| 5268-C-XX | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 1 | |
| 52725A34 | BIT; HEX SHANK ASSORTMENT WITH ADAPTER, 30-PIECE, STEEL, SLOTTED SQUARE, EXTERNAL HEX | 1 | |
| 53-2921 | THD SHANK ADAPTER DRILL SET 3/4" OAL 4 PC. 3/32"-3/16" | 1 | |
| 53-2961 | THD SHANK ADAPTER DRILL SET 4PC, FRACTIONAL, 1-1/4 | 1 | |
| 53-77 | Drill Attachment Conversion Assembly (Includes: 1/4"-28 Adapter 5/32" Chuck) (Add to cart: Add To Cart) | 1 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 533213728 | STAHLWILLE ADAPTER DIA 0.30-32 UNF | 1 | |
| 533222121 | ADAPTER - AXLE NUT NLG | 1 | |
| 543-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 8 | |
| 55-1021-03 | ADAPTER CABLE-TSD SYSTEM | 4 | |
| 55-5002-00 | Adapter PSD40-502-2 | 1 | |
| 55-5002-30 | Adapter PSD40-502-3 | 1 | |
| 550T05648-401 | ADAPTER,ASSY-PRES-SURE TEST,ENGINE SHROUD | 1 | |
| 550T05648-401 | ADAPTER,ASSY-PRESSURE TEST,ENGINE SHROUD | 1 | |
| 550T05649-401 | ADAPTER-TEST,WHEEL SPEED TRANSDUCER | 1 | |
| 550T05649-401 | ADAPTER-TEST,WHEEL SPEED TRANSDUCER | 1 | |
| 550T05652-401 | ADAPTER-PRESSURIZA-TION TEST,CABIN | 1 | |
| 550T05652-401 | ADAPTER-PRESSURIZATION TEST,CABIN | 1 | |
| 550T05654-401 | ADAPTER,ASSY-PRES-SURE TEST,APU SHROUD | 1 | |
| 550T05654-401 | ADAPTER,ASSY-PRESSURE TEST,APU SHROUD | 1 | |
| 550T05658-401 | ADAPTER, JACKING-WING | 1 | |
| 550T05658-401 | ADAPTER,JACKING-WING | 1 | |
| 550T05661-401 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
| 550T05661-403 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
| 550T05666-401 | ADAPTER,SLING-HS LIFTING | 1 | |
| 550T05666-401 | ADAPTER,SLING-HS LIFTING | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 550T09071-001 | ADAPTER FITTING -PRESSURIZATION TEST | 1 | |
| 552 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) | 3 | |
| 560-070 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) | 3 | |
| 560XL | ADAPTER - FIBER OPTIC, SC-SC MULTIMODE | 3 | |
| 568 | ADAPTER 3/4" - 1/2" FOR E.C.K 17 | 1 | |
| 5653 | ADAPTER , 1/2 -3/4 | 6 | |
| 5711ET0001-501 | ADAPTER - LOAD TEST | 1 | |
| 5784 | ADAPTER-GOOSENECK | 1 | |
| 57292 | 57292;PSDAF-102B Adapter Aux/Ext Tank | 1 | |
| 575108-100 | ADAPTER - TEST (ESCAPE SLIDE DEFLATION) | 1 | |
| 57575 | 57575;PSDA300-4 FQIS Interface Adapter | 1 | |
| 57636 | 57636;Cable ASSY;PSD30-2AF Adapter | 1 | |
| 57ME65B00713 | ADAPTER - NOSE COWL HANDLING, ON WING MAINTENANCE, JT9D ENGINE | 1 | |
| 58079 | 58079;55-1045-13 Adapter TS-4530 / 424 KIV 6 | 1 | |
| 582-520 | DRIVE SOCKET ADAPTER 3/8-1/4 INCH | 1 | |
| 5826068-1 | COVER - GENERATOR ADAPTER | 2 | |
| 58303 | 58303;Cable PSD40-502 Adapter 727/737/747 | 1 | |
| 58304 | 58304;Cable PSD40-502-1 Adapter 727/737/747 | 1 | |
| 58305 | 58305;Cable PSD40-502-2 Adapter RESERVE 2-3 | 1 | |
| 58306 | 58306;Cable PSD40-502-3 Adapter Wing TankS | 1 | |
| 58307 | 58307;Cable PSD40-502-4 Adapter Center Tank | 1 | |
| 58026233 | ADAPTER-CRADLE ASSEMBLY | 1 | |
| 58290012 | 7370/10-2-INSERT ADAPTER 9X12MM FOR SR F | 1 | |
| 58290042 | 7370/40-2-INSERT ADAPTER 14X18MM FOR SR | 1 | |
| 5836025-15 | SMALL ADAPTER INSTALLER (IN 5836025-1 KIT) | 1 | |
| 5836025-16 | LARGE ADAPTER INSTALLER (IN 5836025-1 KIT) | 1 | |
| 5836025-17 | SMALL ADAPTER REMOVER (IN 5836025-1 KIT) | 1 | |
| 5836025-18 | LARGE ADAPTER REMOVER (IN 5836025-1 KIT) | 1 | |
| 5930 | ADAPTER (FOR UNION P/NO. 35066-08) | 3 | |
| 5990 | ADAPTER (FOR UNION P/NO. 35066-16) | 1 | |
| 64647 | 64647;Adapter;KIV-77 | 1 | |
| 64804 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1/2 NPT MALE X 1/2" | 1 | |
| 64812 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1" NPT X 1" | 1 | |
| 64980 | ADAPTER, TEST CLUB - ALL ENGINES WITH AS-127 TYPE 2 PROPELLER FLANGE WITH BUSHINGS FOR 7/16 IN. PROPELLER ATTACHING BOLTS | 1 | |
| 69082 | CHERRY® PULLING HEAD ADAPTERS ( FOR SCREWS: G84 )( ALLOWS 1:: H701B-456, H753A-456 & H781-456 ) | 2 | |
| 600727 | 1/4 Female Sq. Dr. x 17mm Male Hex Adapter (for EZ-TorQ) | 1 | |
| 606027 | Henkel 98181 LOCTITE 14 NPT Semco Cartridge Adapter - Pack of 3 | 1 | |
| 628000 | MOBILE UV-LED LAMP WITH MAINS ADAPTER | 2 | |
| 6795791 | ADAPTER - LIFTING, TURBINE UNIT AND POWER SECTION | 3 | |
| 6795875 | ADAPTER - VIEWING | 1 | |
| 6796265 | PULLER - TURB COUPLING SHAFT ADAPTER | 1 | |
| 6796359 | ADAPTER - HOLDING, NO. 60 PROPELLER SHAFT | 4 | |
| 6796379 | ADAPTER - LEVER | 1 | |
| 6796464 | ADAPTER - LIFTING, COMPRESSOR | 2 | |
| 6796535 | ADAPTER - GAGE, TURBINE ROTOR TO VANE AXIAL CLEARANCE | 3 | |
| 6796540 | ADAPTER - LIFTING, TURBINE ROTOR | 2 | |
| 6796568 | ADAPTER - TORQUE, COORDINATOR CONTROL SHAFT | 2 | |
| 6796577 | ADAPTER - DIFFUSER MOUNTING | 2 | |
| 6796644 | ADAPTER, STAND-TURBINE UNIT | 2 | |
| 6796692 | ADAPTER - STAND, REDUCTION GEAR | 2 | |
| 6796693 | ADAPTER - STAND, REDUCTION GEAR REAR CASE | 2 | |
| 6796694 | ADAPTER - STAND, ACCESSORY DRIVE HOUSING ASSEMBLY | 2 | |
| 6796696 | ADAPTER - STAND | 1 | |
| 6796697 | ADAPTER - STAND, COMPRESSOR SECTION | 2 | |
| 6796716 | ADAPTER - DIFFUSER MOUNTING | 1 | |
| 6796717 | ADAPTER - COMPRESSOR AIR INLET | 1 | |
| 6796726 | ADAPTER - MOUNTING, HORIZONTAL VIBRATION PICKUP | 2 | |
| 6796727 | ADAPTER - MOUNTING, VERTICAL VIBRATION PICKUP | 2 | |
| 6796760 | ADAPTER - BUSHING | 1 | |
| 6796810 | ADAPTER - ATTACHING, COMBUSTION CHAMBER CASING LIFT | 3 | |
| 6796813 | ADAPTER - MOUNTING | 1 | |
| 6796814 | ADAPTER - MOUNTING | 1 | |
| 6796815 | ADAPTER - TRUNNION | 1 | |
| 6796818 | ADAPTER – STAND, TURBINE UNIT 600 SERIES - | 1 | |
| 6796820 | ADAPTER - ATTACHING | 1 | |
| 6796821 | ADAPTER - TRUNNION | 1 | |
| 6796846 | ADAPTER - MOUNTING | 1 | |
| 6796871 | ADAPTER - LIFTING, POWER SECTION | 2 | |
| 6796891 | ADAPTER - TORQUE REDUCTION GEAR FILTER | 3 | |
| 6796899 | ADAPTER - PRESS, COMPRESSOR ROTOR 14TH STAGE END | 1 | |
| 6796900 | ADAPTER - PRESS, COMPRESSOR ROTOR 14TH STAGE END | 1 | |
| 6796965 | ADAPTER - ATTACHING | 2 | |
| 6796972 | ADAPTER - LIFTING | 1 | |
| 6796978 | ADAPTER - RING | 1 | |
| 6796999 | ADAPTER - TORQUE | 1 | |
| 6797175 | PULLER - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797179 | DRIFT - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797288 | ADAPTER-LIFTING, TURBINE UNIT | 1 | |
| 6797313 | ADAPTER TORQUE CO-ORDINATOR CONTROL SHAFT | 1 | |
| 6797355 | ADAPTER-STAND, TURBINE UNIT | 1 | |
| 6797690 | ADAPTER - LIFTING, TURBINE UNIT AND POWER SECTION | 2 | |
| 6797775 | ADAPTER FRONT-TORQUEMETER & SAFETY COUPLING | 1 | |
| 6797776 | ROLLS-ROYCE ALLISON ADAPTER REAR TORQUEMETER & SAFETY COUPLING ASSY | 2 | |
| 6797899 | ADAPTER - INSTALLATION AND REMOVAL SCREW THREAD INSERT | 1 | |
| 6798089 | ADAPTER-SUPPORTING | 3 | |
| 6798316 | ADAPTER - TURNOVER STAND | 2 | |
| 6798981 | ADAPTER - SPLINED | 1 | |
| 6798984 | ADAPTER - FRONT REDUCTION | 1 | |
| 6799523 | ADAPTER - TRUNION, TURBINE ROTOR STAND | 2 | |
| 6799619 | ADAPTER - LIFTING, TURBINE ROTOR | 3 | |
| 6799620 | Adapter â Lifting, Turbine Unit Assembly NOTE: Superseded by 23032998 for T-56-A-7A(N), 10WA, 14, | 3 | |
| 6799790 | ADAPTER +Ã-Ã-Ã ENGINE TURNING, SPARE HYDRAULIC DRI | 3 | |
| 6799877 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET | 1 | |
| 6799878 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET PHASE DETECTOR | 1 | |
| 6799976 | ADAPTER - ENGINE AIR INLET PAD | 2 | |
| 6851348 | ADAPTER - GEAR BOX COVER | 2 | |
| 6872473 | Bracket ADAPTER- MOUNTING | 1 | |
| 6872503 | ADAPTER - AIR FLOW FIX | 1 | |
| 6872550 | HOLDER - COMPRESSOR ROTOR COUPLING ADAPTER | 2 | |
| 6872646 | GUIDE-SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6872832 | PULLER - COMPRESSOR ADAPTER | 2 | |
| 6872936 | ADAPTER - SERIES 1 1ST STAGENOZZLE FIXTURE | 1 | |
| 6872945 | ADAPTER - SERIES 2 3RD AND 4TH STAGE | 1 | |
| 6873007 | ADAPTER - CHECKING | 1 | |
| 6887894 | ADAPTER - SCAVENGE OIL PRESSURE TEST | 1 | |
| 6891195 | PULLER - COMPRESSOR ROTOR SPLINED ADAPTER | 2 | |
| 6893362 | ADAPTER - EXHAUST | 1 | |
| 6893376 | ADAPTER - ATTACHING, GAS PRODUCER | 2 | |
| 6893501 | DRIFT - SPUR ADAPTER GEARSHAFT | 1 | |
| 6893503 | GAGE--SPLINE, SPUR ADAPTER GEARSHAFT AND SECOND-STAGE SPLINED ADAPTER CHECKING | 2 | |
| 6897833 | ADAPTER - SHROUD BLEED AIR MANIFOLD | 1 | |
| 6897868 | PULLER - SPLINED ADAPTER | 2 | |
| 6898448 | ADAPTER - TEST, ENGINE DIFFUSER BLEED PRESSURE | 1 | |
| 58521087 | 7787-SQUARE DRIVE ADAPTER | 1 | |
| 58522089 | ADAPTER, SOCKET WRENCH MODEL 7789-1 | 1 | |
| 58523089 | 7789-2-SQUARE DRIVE ADAPTER | 1 | |
| 58524089 | 7789-3-SQUARE DRIVE ADAPTER | 1 | |
| 58524090 | 7789-4-ADAPTER 1/4 ID TO 1/2 EXTERN | 1 | |
| 58524091 | 7789-5-ADAPTER 3/8 ID TO 1/2 EXTERN | 1 | |
| 5916703-501 | Adapter assy-jack，nos6 landing gear | 8 | |
| 5916733-505 | Adapter assy-torque MLG trunnion bolt | 3 | |
| 5916778-1 | ADAPTER-PNEUMATIC SY | 6 | |
| 5936856-1 | ADAPTER-TORQUE | 1 | |
| 5936856-501 | ADAPTER-TORQUE | 2 | |
| 5955282-1 | Adapter Assy - Torque, MLG Trunnion Bolt | 4 | |
| 5962528-501 | Adapter - Torque Tailcone Release | 3 | |
| 5963309-1 | Adapter-angle of attack protractor | 2 | |
| 5963440-1 | Test Adapter - CADC, Remote | 6 | |
| 5966368-1 | Adapter-Transducer Md90 | 1 | |
| 5981302-503 | Adapter - APU Hoist | 1 | |
| 5MIT65B01231-1 | CROWFOOT WRENCH - ADAPTER, RETAINER NUT, BODY LANDING GEAR | 1 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 2 | |
| 5MIT65B01502 | Torque adapter-retract actuator B.L.G. | 1 | |
| 5MIT65B01502-1 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 1 | |
| 5MIT65B81129 | ADAPTER ASSEMBLY - TORQUE WRENCH INBOARD TRAILING EDGE FLAP DRIVE, INBOARD TRANSMISSION | 2 | |
| 5SE00770-1 | A-4 TEMP TRIM ADAPTER | 1 | |
| 5SE00852-1 | TA-4 TEMP TRIM ADAPTER | 1 | |
| 5TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, CENTER WING TANK | 1 | |
| 60-3200-0010 | ADAPTERS - FUNCTIONAL TEST BOX ( 2 CABLES ) | 3 | |
| 60-3206-0008 | ADAPTER KIT-FUNCTIONAL TEST BOX, TDG | 1 | |
| 60159-101 | ADAPTER-CABLE AY, ELECTRIC | 1 | |
| 601R57-048K92 | TOOL - COLD WORK KIT FOR OFFSET ADAPTER | 1 | |
| 602751-003 | PDL CABLE ADAPTER-MDDU | 1 | |
| 60MIT65B00112 | JACKING ADAPTER ASSEMBLY - OUTBOARD WING WBL 938.8 | 1 | |
| 611000GSE050 | ADAPTER-TORQUE PROP FASTENERS (REMOVE/INSTALL) | 1 | |
| 61169-101 | TOOL - ADAPTER, DEFLATE VALVE | 1 | |
| 612-00003 | LO-Z PROBE ADAPTER | 1 | |
| 61657-2 | AIRCRAFT ADAPTER WEAR GAUGE - REFUEL | 9 | |
| 63156A0700-01 | ADAPTER, HALF SHELL -SLEEVE MLG SLIDING TUBE ASSY | 1 | |
| 635-6382-001 | 678P-1/2 (ASI-209-X) TEST SET ADAPTER FOR 628T-1/1B | 1 | |
| 63605-001 | ALTERNATE BLEED AIR SOURCE (ABAS) KIT (REGULATOR P/N 63605−101, AIR SUPPLY ADAPTER 63605-104, AIR HOSE P/N 63605−105) | 3 | |
| 63605-105 | 63605-101, AIR SUPPLY ADAPTER 63605-104, AIR HOSE | 1 | |
| 63687-1 | ADAPTER,ORAL TUBE TEST (HALKEY ROBERTS CORP->V98021) | 2 | |
| 63801-8901 | Crimp Adapter For DIN style dies In Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8902 | Crimp Adapter for 35mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8903 | Crimp Adapter for 22mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 6400-3-4-O | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 64882-101 | ADAPTER, VACUUM 64882-101 (METAL PACKING FIXTURE) | 1 | |
| 64886-103 | ADAPTER, VACUUM 64886-103 | 1 | |
| 649500_6 | ADAPTER 1/2"-3/4" DRIVE STAHLWILLE | 1 | |
| 64ME65B00713 | FRONT ADAPTER AND YOKE - ENGINE HANDLING | 1 | |
| 65037-1 | ADAPTER CABLE - ASSEMBLY | 1 | |
| 651-1904-007 | ADAPTER-TYPE CONNECTOR | 1 | |
| 65346-101 | OUTLET PORT ADAPTER(D18302 VALVE/REGULATORSEQUIPPED WITH FILLER VALVE889CAS10-1 ONLY) | 1 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY 65425-101 | 1 | |
| 65D35557-1 | ADAPTER BOOM HOOK MHU-97/E | 1 | |
| 66-201 | ADAPTER-PRESSURE | 1 | |
| 66048-4 | ADAPTER, PRESSURE CHUCK 66048-4 | 1 | |
| 66184-1 | ADAPTER - FOR HYDROSTATICTESTING (HOSE) | 1 | |
| 66731-1 | TOOL - ADAPTER, PRESSURE TEST VALVE, C37099-103 | 2 | |
| 6801-4-3 NOW | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 6801-4-3 NWO | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 68060-AM1C-27 | AIR DRIVEN GENERATOR TEST ADAPTER P/N SPL-11921 | 1 | |
| 680B204 | ADAPTER-SLEEVE | 1 | |
| 680B205 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 680B46 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 2 | |
| 680B57 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 68D310053-1003 | PSD-90 F-15 ADAPTER KIT | 1 | |
| 69002647-001 | 69002647-001 (ETHERNET ADAPTER) | 1 | |
| 69002793-001 | 69000789-002 ADAPTER FOR 69000789-001 | 1 | |
| 69525-1 | Adapter Cable - Switch | 3 | |
| 69ME65B00713 | ACCESSORY ADAPTER - HOIST SYSTEM, JT9D-7 ENGINE | 3 | |
| 6MIT65B00112 | ADAPTER - FUEL TANK VENTILATION | 6 | |
| 6MIT65B01201-1 | WRENCH ADAPTER - NUT, LOWER DRAG BRACE, WING LANDING GEAR | 3 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 6MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 6SF7062-501 | Adapter - APU Removal/Installation | 1 | |
| 6TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | 1 | |
| 7-00063-60 | ADAPTER - OBJECTIVE HEAD | 1 | |
| 7-00063-69 | ADAPTER - OBJECTIVE HEAD | 1 | |
| 7-1772 | ADAPTER CABLE LAU-117 | 1 | |
| 7-6915-1 | TEST CABLE ADAPTER 7-6915-1 (FOR SLIDE 67952-10401 ONLY) | 1 | |
| 7010SN | ADAPTER CLOCK COMPARATOR - DIGIMESS | 1 | |
| 702-2619-002 | ADAPTER CABLE- DATA LOADER | 1 | |
| 702941-01 | TPCU MAINTENANCE TEST BOARD (TEST ADAPTER ) MFR : OLWJ2 ATA : 44-23-25 | 1 | |
| 704-2383-001 | ADAPTER CABLE - ACARS MU | 1 | |
| 704-2389-001 | SPL-14314 ADAPTER CABLE - HONEYWELL PDL TO EEC DATA LOAD CABLE 704-2389-001 97896 | 3 | |
| 704-2389-001 97896 | SPL-14314 Adapter Cable - Honeywell PDL to EEC Data Load Cable 704-2389-001 97896 | 1 | |
| 704-2567-001 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | 1 | |
| 704-2619-001 | ADAPTER CABLE-DATA LOADER | 2 | |
| 704-2619-002 | ADAPTER CABLE- DATA LOADER | 7 | |
| 704-3058-002 | SSCVR/HFR5-V ADAPTER CABLE | 1 | |
| 7073 | Adapter-Test | 1 | |
| 7079 | Adapter-Test | 1 | |
| 7084 | Adapter-Test | 1 | |
| 70449 | Threaded Shank Drill Adapters (Shear part number: 1/4" Hex) (Thread: 10-32) (Add to cart: Add To Cart) | 1 | |
| 70456 | Threaded Shank Drill Adapters (Shear part number: 1/4" Hex) (Thread: 10-32) (Add to cart: Add To Cart) (Shear part number: 1/4" Hex) (Thread: 1/4"-28) (Add to cart: Add To Cart) | 3 | |
| 704A6 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 704A9 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 2 | |
| 72-500-04 | ADAPTER CABLE SERVO VALVE (DOES NOT CHECK B3 & B4 - 2ND VALVE ASSY.) | 1 | |
| 7200TC15076 | FWD Mount Adapter-Cradle Assy | 1 | |
| 72051584-1 | ADAPTER-PROBE,LIGHT METER | 1 | |
| 724-PSEU | ADAPTER 100-240V | 2 | |
| 73-0067-02 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
| 730N/65 | TORQUE WRENCH WITH ADAPTER (0-600 RANGE) | 1 | |
| 734-92713 | TORQUE ADAPTER (EQUIVALENT TO 771-16957) | 1 | |
| 734-92715 | TORQUE ADAPTER (EQUIVALENT TO 771-16959) | 1 | |
| 734-92717 | TORQUE ADAPTER (EQUIVALENT TO 771-16961) | 1 | |
| 734-92718 | TORQUE ADAPTER (EQUIVALENT TO 771-16963) | 1 | |
| 734147-1 | ADAPTER (HDF-FEM.) | 1 | |
| 734148-1 | ADAPTER (HDF-MALE) | 1 | |
| 740A26 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 744-100 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 744-200 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 4 | |
| 744-300 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 4 | |
| 744-500 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 744-600 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 744-700 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 744A20 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 744B25 | Cherry® Pulling Head Adapters (For screws: G87D) (Allows 1:: H84A-8, H83B-5MB, H83B-6MB) (Add to cart: Add To Cart) (For screws: G87D) (Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (Add to cart: Add To Cart) (For screws: G686B-S, G689, G | 1 | |
| 75 25Y1859-1 | ADAPTER - REFUELLING | 1 | |
| 751204 | ADAPTER -GAGE BILT | 2 | |
| 758303 | ADAPTER ASSY-QAD | 1 | |
| 767 PITOT TEST ADAPTER KIT | PITOT TEST ADAPTERS PS76700-4-4-4 | 1 | |
| 77144-T | ADAPTER-TORQUE, AUTO BRAKE PRESSURE | 1 | |
| 77144-T6 | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
| 77144-T6PM | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
| 772 BMARK2 | ADAPTER - INFLATION KIT | 1 | |
| 772B | ADAPTER - INFLATION KIT | 3 | |
| 772B MK2 | ADAPTER - INFLATION KIT | 9 | |
| 772BMK2 | ADAPTER - INFLATION KIT | 9 | |
| 78100011543 | ROSE ANALYSIS UNIT ADAPTER CABLE - 17TES0072 | 1 | |
| 78100011547 | ROSE ANALYSIS UNIT - RECORDER USB FDAU SIMULATOR (RUFS) (RI) ADAPTER - 17TES0076 | 1 | |
| 79000218-1 | TEST UNIT ADAPTER - FCE BATTERY | 1 | |
| 7900021801 | TEST UNIT ADAPTER-FCE BATTERY | 1 | |
| 79000494-1 | ADAPTER - LUBRICATION CFM56 - 5 VBV SYSTEM GREASER | 3 | |
| 7C2218 | ADAPTER SET - VSV ACTUATOR | 1 | |
| 7C2244 | ADAPTER, PEDESTAL - CDN. | 1 | |
| 7TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 2 AND 3 RESERVE TANKS | 1 | |
| 7TE65B00776-51 | HARNESS-CAL/ADAPTER | 1 | |
| 800-0630 | USB-429 INTERFACE BOX ADAPTER | 6 | |
| 80044-4 | POWER SUPPLY ADAPTERS AC/DC,OUTPUT 24V/3.0A INPUT 100-240V/1.5A | 1 | |
| 80061-5 | PMAT 2000 to PMAT NT with in-line AC Adapter | 1 | |
| 80072-4 | CABLE - ADAPTER, ELECTRONIC FLIGHT BAG, PMAT2000 (EFB) | 5 | |
| 80080-1 | PMAT XS & PMAT 2000 6.F FT ARINC 615A LOAD TO RJ45 ADAPTER KIT /COFC INCLUDES CABLE 80079-1 | 7 | |
| 80088-1 | CABLE - ADAPTER, ELECTRONIC FLIGHT BAG, LAPTOP (EFB) | 2 | |
| 802-0137 | Lockheed L-209 Portable Rack Adapter | 1 | |
| 802-0162 | Plessey PV-1584 Portable Rack Adapter | 1 | |
| 802-0320 | RSU/USB PTI ADAPTER (650-0320) | 2 | |
| 8028181-10 | ADAPTER SET MHU-25 | 1 | |
| 8028182-10 | ADAPTER, M-9 | 1 | |
| 80321-S58-12 | REGULATOR TEST ADAPTER 0.500-14 ANPT THREADS | 1 | |
| 803213-S58-1 | REGULATOR TEST ADAPTER 0.750 - 16UNF2A X 0.250 - 18 ANPT THREADS | 1 | |
| 803213-S58-10 | REGULATOR TEST ADAPTER 1.00 - 11.5 ANPT X 0.250 - 18 ANPT THREADS | 1 | |
| 803213-S58-12 | REGULATOR TEST ADAPTER 0.500 - 14 ANPT X 0.250 - 18 ANPT THREADS | 1 | |
| 80934 | ADAPTER 1/2”M-3/8”F | 1 | |
| 80A3720901K1M1TK | No.4RB CF6-80A3 Radial Clearance Adapter | 1 | |
| 80A3720901K2M1TK | No.6RB CF6-80A3 Radial Clearance Adapter | 1 | |
| 80AC720901K4M1TK | No.4BB CF6-80A3 Radial Clearance Adapter | 1 | |
| 80AK | ADAPTER - THERMOCOUPLE | 1 | |
| 80AK-A | THERMOCOUPLE - ADAPTER | 2 | |
| 80C2720901K1M1TK | No.4RB CF6-80C2 Radial Clearance Adapter | 1 | |
| 80C2720901K2M1TK | No.6RB CF6-80C2 Radial Clearance Adapter | 1 | |
| 810-2007-KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 9 | |
| 810-2007/KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 9 | |
| 810-325 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 21 | |
| 816 | ADAPTER-NOSE JACKING A330 | 1 | |
| 822-0030-001 | ADAPTER- SLIP CLUTCH TEST | 1 | |
| 8221381-01 | ADAPTER - STATIONARY INNER SPLINE | 1 | |
| 8461 | ADAPTER CABLE - HONEYWELL ZING | 1 | |
| 82559 | 82559;AC27002 Attenuator;20 dB/50 W;Adapter N-F to BNC-F;Adapter N-M to TNC-M | 1 | |
| 82560 | 82560;AC27003 Attenuator;20 dB/150 W;Adapter N-F to BNC-F;Adapter N-M to BNC-F | 1 | |
| 826005-17 | ADAPTER - HOT WIRE ANEMOMETER | 1 | |
| 826005-24 | ADAPTER - HOT WIRE ANEMOMETER | 1 | |
| 830-6277-001 | ADAPTER-TEST UNIT | 1 | |
| 833811-01 | AIS-380 FUEL FLOW ADAPTER | 1 | |
| 833834-1 | ADAPTER - CABIN PRESSURIZATION TESTER | 3 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834730-1 | ADAPTER - TORQUE, STARTER CLUTCH | 1 | |
| 834750 | Adapter-Link | 1 | |
| 834820-1 | ADAPTER, SPLIT-PLATE | 1 | |
| 835284 | Set-Adapter PWR Flush | 1 | |
| 8457784 | M-10 ADAPTER SET | 1 | |
| 85255A11 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 42 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
| 85255A13 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 156 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
| 8546607 | ADAPTER ASSY - REAR | 3 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000 G06 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | TORQUE ADAPTER, I/R - NO. 3 BRG | 4 | |
| 856A1000G09 | TORQUE ADAPTER, I/R - NO. 3 BRG | 6 | |
| 856A1006 | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856A1006 G01 | Torque Adapter Wrench - Compressor Stator To Support | 11 | |
| 856A1006 REV F | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856A1006G01 | ADAPTER, TORQUE - COMPR STATOR | 11 | |
| 856A1022P05 | CFM 56-3 TORQUE ADAPTER WRENCH | 7 | |
| 856A1022P06 | CFM 56-3 TORQUE ADAPTER WRENCH | 8 | |
| 856A1036G01 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR TO SUPP | 1 | |
| 856A1039 | ADAPTER-INLET GEARBOX TO POWER ARM | 1 | |
| 856A1039 G01 | Adapter - Inlet Gearbox to Power Arm | 11 | |
| 856A1039G01 | Adapter - Inlet Gearbox to Power Arm (adapter) | 11 | |
| 856A1084G04 | VSV-VBV ADAPTER CFM56 TES | 28 | |
| 856A1089 | Adapter- HPTR To Compressor Rotor Nuts | 1 | |
| 856A1089G03 | ADAPTER - HPT ROTOR TO COMPR ROTOR NUTS | 6 | |
| 856A1089G04 | ADAPTER - HPT ROTOR TO COMPR | 6 | |
| 856A1094 | ADAPTER - HOLD POWER | 1 | |
| 856A1094G01 | ADAPTER, HOLDING - POWER ARM HPT NOZZLE ASSEMBLY (HOLDING ADAPTER) | 1 | |
| 856A1098G01 | ADAPTER TORQUE WRENCH- HPT NOZZLE | 5 | |
| 856A1098P01 | ADAPTER, TORQUE WRENCH - HPT NOZZLE (ADAPTER) | 1 | |
| 856A1102 | ADAPTER, HORIZONTAL LIFT - FIXTURE | 1 | |
| 856A1102 G03 | ADAPTER, HORIZONTAL LIFT - FIXTURE | 10 | |
| 856A1102G01 | ADAPTER, HORIZANTAL LIFT-FIXTURE | 1 | |
| 856A1102G02 | ADAPTER, HORIZANTAL LIFT-FIXTURE | 1 | |
| 856A1102G03 | ADAPTER, HORIZONTAL LIFT - FIXTURE | 10 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1312P29E | ADAPTER ARM SUPPORT ENGINE HANDLING - PEDESTAL | 1 | |
| 856A1336 | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 5 | |
| 856A1336 REV C | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 1 | |
| 856A1336G02 | ADAPTER WRENCH - FASTENER | 20 | |
| 856A1369 | FIXTURE, ADAPTER LINI- GAGE- DATA ACQUISITION SYST | 1 | |
| 856A1369 G04 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM G01 | 5 | |
| 856A1369G01 | FIXTURE ADAPTER, LINI-GAGE - DATA | 1 | |
| 856A1369G02 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G04 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 5 | |
| 856A1467 G01 | Pressur Check-Fuel Manifold Adapter | 7 | |
| 856A1467G01 | Adapter, Pressure Check - Fuel Manifold (pressure check adapter) | 7 | |
| 856A1523 | ADAPTER, DRIVE - AGB CRANK PAD | 1 | |
| 856A1523P01 | ADAPTER, DRIVE-AGB CRANK PAD (MANUAL DRIVE PAD | 2 | |
| 856A1523P02 | ADAPTER DRIVE - AGB CRANK PAD (CORE TURN ADAPTER) | 1 | |
| 856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS SUPPORT RING | 1 | |
| 856A1616G02 | ADAPTER CABLE - EEC DATALOADING | 17 | |
| 856A1700G03 | CABLE ASSEMBLY-PDL (28VDC ADAPTER) | 2 | |
| 856A1700G05 | CFM56-5B ECU/PDL ADAPTER CABLE | 7 | |
| 856A1817G01 | ADAPTER, TORQUE, HPTN SUPPORT BOLT (DAC CONFIG 01 PRE SB 72-0209) | 1 | |
| 856A1823 | ADAPTER, DRIVE - AGB CRANK PAD CFM56-7 | 1 | |
| 856A1827G01 | SET - ADAPTER | 19 | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
| 856A1836G01 | ADAPTERS, MAINTENANCE STAND-TO-FORWARD FAN STATOR SUPPORT RING | 10 | |
| 856A1865G01 | TORQUE ADAPTER,I/R-NO.3BRG 1 | 3 | |
| 856A2201G02 | ADAPTER SET, VIBRATOR-COMPR ROTOR BLADES | 1 | |
| 856A2213 | ADAPTER - KIT | 1 | |
| 856A2304G02 | LIFTING & TURNING ADAPTER - N1/2 | 2 | |
| 856A2335G01 | TORQUING / LOOSENING ADAPTER - N1/2 BRG SUPPORT | 3 | |
| 856A2335G02 | TORQUING / LOOSENING ADAPTER - | 5 | |
| 856A2502 | ADAPTER,DRAIN-OIL TANK | 3 | |
| 856A2502 REV H | ADAPTER, DRAIN-OIL TANK OUTILLAGE DE VIDANGE | 1 | |
| 856A2502G02 | ADAPTER,DRAIN-OIL TANK | 1 | |
| 856A2502G06 | ADAPTER DRAIN -OIL TANK | 13 | |
| 856A2525G01 | GUIDE ADAPTER - BOOSTER | 2 | |
| 856A2573 | ADAPTER, PULLER - LPT SHAFT PLUG (PULLER ADAPTER) | 2 | |
| 856A2573G01 | PULLING ADAPTER - LPT SHAFT PLUG | 6 | |
| 856A2607 | ADAPTER - LOCK CORE ENGINE | 1 | |
| 856A2607G01 | LOCKING ADAPTER ENGINE CORE -CFM56 | 4 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A2659 | FILTER ADAPTER - DRY OUT | 1 | |
| 856A2659G01 | FILTER ADAPTER - DRY OUT | 5 | |
| 856A2663 | ADAPTER, PULLER - SPLITTER FAIRING | 2 | |
| 856A2663G01 | Puller Adapter - Splitter Fairing (puller adapter) | 23 | |
| 856A2668 | KIT-PULLER ADAPTERS | 4 | |
| 856A2668G02 | KIT - PULLER ADAPTER | 14 | |
| 856A2685 | ADAPTER, PULLER - OIL INLET COVER (PULLER ADAPTER) | 1 | |
| 856A2685G02 | PULLER ADAPTER - OIL INLET COVER | 1 | |
| 856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 5 | |
| 856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
| 856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 3 | |
| 856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
| 856A2700G01 | ADAPTER PULLER-FAN BLADE SPACERS | 13 | |
| 856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | 1 | |
| 856A2706G03 | BEAM TORQUE ADAPTER - FAN | 5 | |
| 856A2717 | ADAPTER-LOCK CORE ENGINE | 4 | |
| 856A2717G01 | ADAPTER, LOCK - CORE ENGINE (LOCK ADAPTER) | 19 | |
| 856A2727G01 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | 13 | |
| 856A2732 | FLANGE, ADAPTER - TGB (FLANGE ADAPTER) | 1 | |
| 856A2732G01 | FLANGE ADAPTER - TGB | 4 | |
| 856A2787 | BASEPLATE - FUEL PUMP ADAPTER SUPPORT (BASEPLATE) | 1 | |
| 856A2787G01 | SUPPORTING ADAPTER - BASE FUEL PUMP | 6 | |
| 856A2797 | ADAPTER-FUEL RETURN VALVE | 2 | |
| 856A2797G01 | ADAPTER - LEAD TEST FRV | 7 | |
| 856A2820G01 | LOOSENING ADAPTER - LPT COUPLING | 2 | |
| 856A2902G02 | DUMMY ADAPTER - FAN DISK | 5 | |
| 856A2903G01 | TORQUING BEAM ADAPTER - FAN | 11 | |
| 856A2957G01 | ADAPTER - INNER SEAL, LUBRICATION UNIT | 8 | |
| 856A2985 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 1 | |
| 856A2985G01 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 4 | |
| 856A2992 | LOOSENING ADAPTER-LPT COUPLING NUT | 1 | |
| 856A2992G01 | LOOSENING ADAPTER - LPT COUPLING | 4 | |
| 856A3267 | ADAPTER, TEST RIG - AIR FLOW CHECK | 1 | |
| 856A3267G02 | ADAPTER, TEST RIG - N°1 AND N°2 BRG SUPPORT, AIR FLOW CHECK | 10 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 5 | |
| 856A3329G02 | TOOL SET - ADAPTER #1 /#2 AIR IMPINGMENT CHECK | 3 | |
| 856A3362G01 | PULLER ADAPTER - LUBE UNIT FILTERS | 1 | |
| 856A3419 | ADAPTER, PULLER - OIL INLET COVER | 2 | |
| 856A3419G01 | ADAPTER-PULLER OIL INLET COWL | 2 | |
| 856A3419G02 | Adapter puller-oil inlet cover | 22 | |
| 856A3435G01 | ADAPTER, BLADE ROOT - STATIC MOMENT MEASUREMENT STAGE 1-4 LPT BLADES | 3 | |
| 856A3455G01 | BALANCING DRIVE ADAPTER - FWD LPT SHAFT | 2 | |
| 856A3466 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | 1 | |
| 856A3466G01 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | 6 | |
| 856A3468G01 | - ADAPTER, DRIVE - FWD LPT SHAFT BALANCING (OPTIONAL) | 1 | |
| 856A3471 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 1 | |
| 856A3471P01 | DRIVE SPLINE ADAPTER - FUEL PUMP | 4 | |
| 856A3471P02 | ADAPTER-SPLINE FUEL | 11 | |
| 856A3499G01 | TORQUING/LOOSENING ADAPTER - N1 | 1 | |
| 856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500G01 | ADAPTER PULLER - FAN BLADE | 17 | |
| 856A3501G04 | LOOSENING ADAPTER - LPT COUPLING NUT | 14 | |
| 856A3509 | ADAPTER, LOCKING - CORE ENGINE (LOCKING ADAPTER) | 4 | |
| 856A3509 G01 | ADAPTER, LOCKING - CORE ENGINE WITH | 15 | |
| 856A3509G01 | ADAPTER - LOCKING, CORE ENGINE WITH AGB - CFM56-3 ENGINE | 15 | |
| 856A3510 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | 1 | |
| 856A3510 G02 | ADAPTER, LIFT AND TURN - 1 AND 2 BRG SUPPORT | 1 | |
| 856A3510G03 | Adapter, Lift and Turn - Module 2 (adapter) | 1 | |
| 856A3510G04 | LIFTING & TURNING ADAPTER - N1/2 | 10 | |
| 856A3515G04 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 9 | |
| 856A3524 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 1 | |
| 856A3524G01 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT | 14 | |
| 856A3544 | FLANGE, ADAPTER - TGB | 1 | |
| 856A3544G01 | FLANGE, ADAPTER - TGB | 1 | |
| 856A3544G02 | FLANGE, ADAPTER - TGB | 1 | |
| 856A3544G03 | FLANGE, ADAPTER - TGB | 8 | |
| 856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | 1 | |
| 856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 6 | |
| 856A3557G01 | TOOL D-SEAL ADAPTER LUBE UNIT | 22 | |
| 856A3601 | ADAPTER - DRAIN LUB UNIT | 1 | |
| 856A3601G01 | ADAPTER- DRAIN LUBE UNIT | 10 | |
| 856A3601G01 | ADAPTER - DRAIN, LUBRICATION UNIT | 10 | |
| 856A3625 | ADAPTER-INNER SEAL,LUBRIC | 2 | |
| 856A3625G01 | ADAPTER - INNER SEAL, LUBRICATION UNIT | 12 | |
| 856A3627 | ADAPTER PRESSURE TEST-FUEL MANIFOLD | 1 | |
| 856A3627 REV A | ADAPTER PRESSURE TEST-FUEL MANIFOLD | 1 | |
| 856A3627G01 | TESTING PRESSURE ADAPTER - FUEL | 8 | |
| 856A3721 | ADAPTER TOOL SET - LIFT AND TURN 1 &2 BEARING SUPPORT (TOOL SET) | 1 | |
| 856A3721G03 | Adapter Tool Set - Lift and Turn 1 &2 Bearing Support (tool set) | 11 | |
| 856A3728G01 | SEALING PLATE & LOCKING ADAPTER - | 12 | |
| 856A3728G02 | SEALING PLATE & LOCKING ADAPTER - | 14 | |
| 856A3810 | ADAPTER, AIR - DRY OUT ENGINE SUMPS | 1 | |
| 856A3810G01 | ADAPTER, AIR DRIVE - DRY OUT ENGINE SUMPS | 11 | |
| 856A3901G01 | ROTATION ADAPTER - CORE DRIVE PAD | 1 | |
| 856A4095 | ADAPTER KIT. INSTALL / REMOVE SWAGED NUTS - CDP SEAL | 1 | |
| 856AI006 | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 85J1028-001 | JACK ADAPTER - NLG | 1 | |
| 8765 | P-LEAD ADAPTER (EARLY S20) | 1 | |
| 8766 | P-LEAD ADAPTER (S200,S600) | 2 | |
| 8767 | P-LEAD ADAPTER (D2000, D3000) | 2 | |
| 8768 | P-LEAD ADAPTER (COMPLETE SET) | 2 | |
| 8998 | ADAPTER CABLE - HONEYWELL ZING | 1 | |
| 86769 | 86769;Adapter; KIV-78 / KIV-6 | 1 | |
| 88631 | ADAPTER FOR IFF-45TS | 2 | |
| 88657 | Henkel 97208 LOCTITE 10 ml Syringe Airline Adapter - Pack of 2 | 1 | |
| 88678 | Henkel 97245 LOCTITE 30 55 mL Syringe Airline Adapter - Pack of 2 | 3 | |
| 8600222 | INHIBITING ADAPTER FOR LP-FUEL PUMP | 2 | |
| 8600223 | INHIBITING ADAPTER FOR HP-FUEL | 1 | |
| 8600429 | TORQUE ADAPTER - PART NO. 8600429 | 5 | |
| 8644425-10 | MUNTION LOADING ADAPTER ADU-53 | 1 | |
| 871044-10 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| 871044-28 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 1 | |
| 8807N-4 | CAP ADAPTER FOR IN-80A | 1 | |
| 884EE | ADAPTER - PITOT-STATIC PROBE (PART# 884EE, SUP. 59885) | 1 | |
| 884EE (SUP. 59885) | ADAPTER - PITOT-STATIC PROBE (PART# 884EE, SUP. 59885) | 1 | |
| 884EH | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 884EH-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 884EHJ-3 | ADAPTER - PITOT TEST | 1 | |
| 89010042 | LH 928 - LAPTOP HOLDER ADAPTER | 1 | |
| 899005010 | ADAPTER-LUBRICATION | 1 | |
| 8C2013 | ADAPTER, GRIND - HP TURBINE ROTOR, FWD & AFT | 1 | |
| 8C2024 | ADAPTER, ANTI-TORQUE - HPTR | 1 | |
| 8C2042 | ADAPTER, DRIVE - BALANCE, HPTR | 1 | |
| 8C2043 | ADAPTER, TORQUE - NO. 4 S | 1 | |
| 8C2107 | ADAPTER, SUPPORT - HPCR | 1 | |
| 8C2116 | ADAPTER, GRIND/BALANCE-HPCR, AFT | 1 | |
| 8C2134 | FIXTURE, ADAPTER - GENSPECT (AFT END DOWN) | 1 | |
| 8C2160 | ADAPTER SET, INSTALL/REMOVE - FORWARD HPC STATOR CASES | 1 | |
| 8C2192 | ADAPTER, GENSPEC - HPCR, AFT BALANCE ARBOR | 1 | |
| 8C2345 | ADAPTER, SUPPORT - K FLANGE | 1 | |
| 8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | 1 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | 1 | |
| 8C2637 | ADAPTER, INSTALL/REMOVE - FMU | 1 | |
| 8C2638 | ADAPTER, INSTALL/REMOVE - AIR STARTER/MFP | 1 | |
| 8C2639 | ADAPTER, INSTALL/REMOVE - LUBE UNIT | 1 | |
| 8C2647 | ADAPTER, INSTALL/REMOVE - HX COMBO | 1 | |
| 8C2663 | ADAPTER LIFT - ENGINE AFT | 1 | |
| 8C2758 | ADAPTER, TORQUE - HPT AIR DUCT (LONG VERSION USED WITH RTR LOCK) | 1 | |
| 8C2824 | ADAPTER, DISASSEMBLY - CDP JOINT | 1 | |
| 8C2895 | FIXTURE, INSTALL - FUEL PUMP, MFF ADAPTER | 1 | |
| 8C2918 | ADAPTER, GUIDE - NO 2 BRG INSTALL | 1 | |
| 8C3407 | FIXTURE - LIFT - AGBX - ADAPTER FUEL PUMP | 1 | |
| 8C3435 | ADAPTER - OIL SUPPLY - AGBX | 1 | |
| 8C3436 | ADAPTER - OIL SCAVENGE - AGBX | 1 | |
| 8C3463 | ADAPTER - EXTRACTION - AGBX - BRG - ETS - IDLER - VSCF | 1 | |
| 8C3464 | ADAPTER - EXTRACTION - AGBX - BRG - ETS - HP - FP | 1 | |
| 8C3465 | ADAPTER - EXTRACTION - AGBX - BRG - IDG - LP | 1 | |
| 8C3466 | ADAPTER - EXTRACTION - AGBX - BRG - IDG - ATS | 1 | |
| 8C3467 | ADAPTER - EXTRACTION - AGBX - BRG - PMA | 1 | |
| 8C3483 | STAND - TROLLEY - AGBX - ADAPTERS | 1 | |
| 8C3488 | SET - PROTECTION PLUGS - AGBX - ADAPTER FP MANIFOLD | 1 | |
| 8C3518 | ADAPTER - OIL SCAVENGE - TGBX | 1 | |
| 8C3519 | ADAPTER - OIL SUPPLY - TGBX | 1 | |
| 8C3523 | ADAPTER - OIL TEST - TGBX - NIPPLE | 1 | |
| 8C3525 | ADAPTER - SHIM MEASUREMENT - TGBX - VERTICAL | 1 | |
| 8C3538 | ADAPTER - WRENCH - TGBX - LOCKNUT - HORIZONTAL | 1 | |
| 8C3552 | ADAPTER - BASE - SUPPORT - DYNAMOMETER - TGBX - VERTICAL | 1 | |
| 8C3556 | ADAPTER - CYLINDER - TGBX - IGBX - VERTICAL - HORIZONTAL | 1 | |
| 8C3618 | ADAPTER - OIL SUPPLY - IGBX | 1 | |
| 8C3628 | ADAPTER - WRENCH - IGBX - NUT - HORIZONTAL | 1 | |
| 8C3635 | ADAPTER - GUIDE - PUSHER HYDRAULIC - IGBX - HORIZONTAL | 1 | |
| 8C3637 | ADAPTER - WRENCH - IGBX - FIXTURE - LIFT - HORIZONTAL | 1 | |
| 8C3675 | ADAPTER - EXTRACTION - IGBX - OIL DISTRIBUTOR - HORIZONTAL | 1 | |
| 8C3676 | ADAPTER - EXTRACTION - IGBX - ROLLER BRG - HORIZONTAL | 1 | |
| 8C3677 | ADAPTER - EXTRACTION - IGBX - BALL BRG - HORIZONTAL | 1 | |
| 8C3678 | ADAPTER - EXTRACTION - IGBX - BALL BRG - HORIZONTAL | 1 | |
| 8MIT65B01221-4 | ADAPTER WRENCH - NUT, RESTRICTOR TUBE, NOSE LANDING GEAR | 1 | |
| 8MIT65B01231-1 | TORQUE ADAPTER - INNER CYLINDER NUT, BODY LANDING GEAR | 1 | |
| 8TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | 1 | |
| 8XHBU-SS | ADAPTER - FITTING (1/2-INCH FLARELESS FITTING AT ONE END AND 1/2-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 90-60 | ADAPTER-OBJECTIVE FOR ENDOSCOPE | 1 | |
| 902-10034 | Cable Adapter 7310/ATR-42 | 3 | |
| 902-10390-1 | ADAPTER CABLE - HONEYWELL ZING | 1 | |
| 902249-1 | ADAPTER A (USE WITH 833834-1) | 1 | |
| 906-10160-1 | DOUBLE INTERRUPTER ADAPTER NON-POLAR | 1 | |
| 9061 | WHEEL INFLATOR ADAPTER - 1 PACK = QTY 10 | 4 | |
| 9045001 | COMPARATOR - BETA LIGHT : PN 9045001 / MAVOLUX 5032B USB (LUMINANCE ATTACHMENT P/N M516G AND ADAPTER DISK P/N M499G MUST BE USED WITH THE LUXMETER) OR MAVO-MONITOR USB. | 11 | |
| 907968-1-1 | ADAPTER-INDICATOR TEST | 1 | |
| 90MIT65B00112 | ADAPTER ASSEMBLY - JACKING INBOARD WING, BBL 566.5 | 2 | |
| 91-6739 | ADAPTER,JACKING-WING | 11 | |
| 9142702600 | WRENCH ADAPTER - RING NUT | 1 | |
| 9171K167 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/8 B-BSPT MAX PSI;2600 | 1 | |
| 9171K168 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-1/2 B-BSPT MAX PSI;2400 | 1 | |
| 9171K169 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/4 B-BSPT MAX PSI;2300 | 1 | |
| 9171K173 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/8 B-BSPT MAX PSI;2600 | 1 | |
| 9171K174 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-1/2 B-BSPT MAX PSI;2400 | 1 | |
| 9171K175 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/4 B-BSPT MAX PSI;2300 | 1 | |
| 9171K232 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/8 MAX PSI;3500 | 1 | |
| 9171K233 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;3000 | 1 | |
| 9171K64 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;3500 | 1 | |
| 9171K65 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-3/8 MAX PSI;3500 | 1 | |
| 9171K66 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;3600 | 1 | |
| 9171K67 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;3600 | 1 | |
| 9171K68 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/2 MAX PSI;3600 | 1 | |
| 932-200 | ADAPTER-LIFTING ENGINE SLING | 1 | |
| 9400M83 | ADAPTER KIT - HYDRAULIC LUBE SYSTEM | 1 | |
| 9400M83G01 | ADAPTER SET - HYDRAULIC LUBE SYSTEM | 1 | |
| 9400M86G01 | ADAPTERS, TEST STAND - FLOW FUEL NOZZLE | 1 | |
| 9400M96 | ADAPTERS & SONIC NOZZLES - TEST STAND FLOW - FUEL NOZZLE | 1 | |
| 9400M96G01 | ADAPTERS, TEST STAND - FLOW FUEL NOZZLE | 1 | |
| 9404M32 | ADAPTER, PRESERVATION KIT - PSEC MANIFOLD | 1 | |
| 9404M32P01 | ADAPTER, PRESERVATION KIT - PSEC MANIFOLD | 1 | |
| 9426M11 | ADAPTER ASSY. SUPPORT- HP COMPR./CDN FLANGE | 1 | |
| 9426M11 REV NC | ADAPTER ASSY. SUPPORT- HP COMPR./CDN FLANGE | 1 | |
| 9426M27 | ADAPTER SET, SUPPORT-BOOSTER, AFT | 1 | |
| 9426M27 REV NC | ADAPTER SET, SUPPORT-BOOSTER, AFT | 1 | |
| 9426M31 | ADAPTER SET, SUPPORT-CORE ENGINE-FWD | 1 | |
| 9426M31 REV NC | ADAPTER SET, SUPPORT-CORE ENGINE-FWD | 1 | |
| 9429M25 | PLATE - TORQUE ADAPTER-INSTALL/REMOVE | 1 | |
| 9429M63 | ADAPTER SET, FLOW CHECK-FRAMES, LUBE SYSTEM | 1 | |
| 9429M71 | ADAPTER SET, FLOW CHECK - FRAM | 1 | |
| 945193GSE1 | ADAPTER - BYPASS, HHX VALVE | 1 | |
| 9455M19 | ADAPTER - GRIND-HP COMP | 1 | |
| 9456M92 | SEAL - ADAPTER-ENGINE | 1 | |
| 9471M47 | ADAPTER - OFFSET - CRANK PAD | 1 | |
| 9471M47G01 | ADAPTER, OFFSET - CRANK PAD | 1 | |
| 9471M47P01 | ADAPTER, OFFSET - CRANK PAD | 3 | |
| 9471M47P02 | ADAPTER - OFFSET, CRANK PAD | 2 | |
| 9471M48 | ADAPTER, TURN - CORE | 1 | |
| 9471M48P01 | ADAPTER, TURN-CORE (MANUAL DRIVE PAD) | 5 | |
| 9481M78 | ADAPTER - BRACKET-STANDARD ROLLOVER STAND | 1 | |
| 9481M92P03 | ADAPTER, OFFSET - CRANK PAD | 4 | |
| 956A1056 | ADAPTER - TORQUE - NO. 4 SPANNER NUT | 1 | |
| 956A1090 | ADAPTER - ANTI-TORQUE - HPTR | 1 | |
| 956A1114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELLER | 1 | |
| 956A1144 | ADAPTER - GRIND HPCR - AFT | 1 | |
| 956A1147 | ADAPTER - HOIST - GENERAL PURPOSE | 1 | |
| 956A1173 | ADAPTER - VSV RIGGING | 1 | |
| 956A1176 | TOOL KIT - ADAPTER - ELECTRONIC PROTRACTOR VSV | 1 | |
| 956A1185 | FIXTURE - ASSY ADAPTER - GENSPEC HPCR/HPTR | 1 | |
| 956A1201 | ADAPTER SET - GUIDE - CDN | 1 | |
| 956A1202 | ADAPTER - ROLL OVER STAND - CDN | 1 | |
| 956A1209 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A1209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A1209G02 | ADAPTER SET, MANIFOLD PRESSURE CHECK- FUEL | 1 | |
| 956A1245 | ADAPTER - STRONGBACK - CORE BUILD STAND | 1 | |
| 956A1259 | ADAPTER - GUIDE - HPC FWD SHAFT | 1 | |
| 956A1283 | ADAPTER, ROLL OVER STAND - CDN | 1 | |
| 956A1320 | BRACKET SET - ADAPTER - TRF | 1 | |
| 956A1607 | ADAPTER - VSV | 1 | |
| 956A1607G01 | ADAPTER - VSV | 7 | |
| 956A1607G02 | ADAPTER - VSV | 5 | |
| 956A1608 | ADAPTER - REMOVAL/INSTALLATION - FUEL PUMP | 2 | |
| 956A1608G01 | ADAPTER, REMOVAL/INSTALLATION - FUEL PUMP | 4 | |
| 956A1610P01 | DRIVE ADAPTER - CORE ENGINE ROTATION | 3 | |
| 956A1613 | ADAPTER - FMU | 1 | |
| 956A1613G01 | ADAPTER - SUPPORT | 6 | |
| 956A1614 | ADAPTER - SCU/SVA | 1 | |
| 956A1614G01 | ADAPTER - SUPPORT | 6 | |
| 956A1616 | ADAPTER - INSTALL/REMOVE - FADEC | 1 | |
| 956A1616G01 | ADAPTER, INSTALL/REMOVE - EEC | 2 | |
| 956A1627G01 | BSI ADAPTER KIT, LEAP-1A/1B | 1 | |
| 956A1631G01 | ADAPTER SET - PRESSURE CHECK - FUEL MANIFOLD - LEAP 1A | 1 | |
| 956A1634G01 | ADAPTER, PROGRAMMING CABLE - HJ9B | 1 | |
| 956A1720 | ADAPTER SET - LIFT - CDN | 1 | |
| 956A3056 | ADAPTER - TORQUE - NO 4 SPANNER NUT | 1 | |
| 956A3114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELL | 1 | |
| 956A3124 | ADAPTER - BALANCE/GRIND - AFT HPC ROTOR | 1 | |
| 956A3144 | ADAPTER - GRIND - HPCR - AFT | 1 | |
| 956A3201 | ADAPTER SET - GUIDE - CDN | 1 | |
| 956A3202 | ADAPTER - ROLLOVER STAND - CDN | 1 | |
| 956A3209 | ADAPTER SET - MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A3209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
| 956A3209G02 | ADAPTER SET - MANIFOLD PRESSURE CHECK | 1 | |
| 956A3209G03 | ADAPTER SET-MANIFOLD | 1 | |
| 956A3240 | ADAPTER SET - COMPRESSOR STATOR - DUMMY | 1 | |
| 956A3250 | ADAPTER - TORQUE - HPT FLANGE NUT | 1 | |
| 956A3259 | ADAPTER - GUIDE - HIGH PRESSURE COMPRESSOR FORWARD SHAFT | 1 | |
| 956A3608 | ADAPTER - FUEL PUMP | 1 | |
| 956A3608G01 | Adapter-Main fuel pump | 4 | |
| 956A3616 | ADAPTER - INSTALL/REMOVE - FADEC | 1 | |
| 956A3616G01 | ADAPTER,INSTALL/REMOVE-FADEC LEAP 1B | 5 | |
| 956A6000 | ADAPTER - PLATE AND SPHERICAL JOINT - FAN MODULE | 1 | |
| 956A6016G01 | Adapter-Install/Remove FADEC | 1 | |
| 956A6046 | ADAPTER - PLATE AND SPHERICAL JOINT - FRONT - ENGINE ASSEMBLY | 3 | |
| 956A6046G01 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN | 3 | |
| 956A6046G02 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 4 | |
| 956A6046G03 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 5 | |
| 956A6078 | KIT - BLANK OFF & ADAPTER - SHROUD FAN FRAME | 1 | |
| 956A6207 | FLANGE ADAPTER - TGB | 1 | |
| 956A6210 | FLANGE ADAPTER - TGB | 1 | |
| 956A6241 | DRIVE SPLINE ADAPTER - TGB | 1 | |
| 956A6250 | FLANGE ADAPTER - AGB | 1 | |
| 956A6257 | FLANGE ADAPTER - AGB | 1 | |
| 956A6288 | DRIVE SPLINE ADAPTER - AGB | 1 | |
| 956A6558 | ADAPTER - LPT REAR FRAME | 1 | |
| 956A6674 | SLIDE HAMMER & ADAPTER - TGB TRANSFERT SHAFT | 2 | |
| 956A6674G01 | SLIDE HAMMER&ADAPTER-TGB TRANSFER | 2 | |
| 956A6674G02 | SLIDE HAMMER & ADAPTER - TGB TRANSFERT SHAFT | 4 | |
| 956A7104 | KIT - BLANK OFF & ADAPTER-SHROUD FAN FRAME KIT | 1 | |
| 956A7314 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 1 | |
| 956A7610 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 1 | |
| 956A7613 | ADAPTER - LOCK - CORE ENGINE | 2 | |
| 956A7613G02 | Adapter-Lock- Core Engine | 5 | |
| 956A7615 | ADAPTER - REMOVE/INSTALL - OIL TANK | 1 | |
| 956A7615G02 | ADAPTER, REMOVE/INSTALL - OIL TANK | 3 | |
| 956A7618G01 | ADAPTER - LUBE UNIT | 1 | |
| 956A7644G03 | TOOLS (INCLUDING ADAPTERS 956A6046G02 AND 956A7314G03) FOR ENGINE CFM LEAP-1A | 4 | |
| 956A7644P39 | ADAPTER- FWD LH | 1 | |
| 956A7644P52 | ADAPTER - FWD RH[SST SAE 17-4PH H900]/SS304 | 1 | |
| 956A7644P55 | ADJUSTER - RH ADAPTER[STL SAE 4140/40CR4MO3]/EN24 | 1 | |
| 956A7644P56 | NUT, LOCK - ADAPTER - FWD RH[STL SAE 4140/40CR4MO3]/EN24 | 1 | |
| 956A7651 | KIT - SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLY | 1 | |
| 956A7651G02 | SLIDE HAMMERS & ADAPTERS-ENGINE ASSEMBLY | 4 | |
| 956A8018G01 | ADAPTER, PLATE AND SPHERICAL JOINT-FAN MODULE. | 1 | |
| 956A8018G02 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 3 | |
| 956A8018P18 | LEFT SIDE AND RIGHT-SIDE ADAPTERS, | 1 | |
| 956A8018P19 | LEFT SIDE AND RIGHT-SIDE ADAPTERS, | 1 | |
| 956A8674 | ADAPTER - DRAIN - OIL SYSTEM | 1 | |
| 956A8674G02 | ADAPTER, DRAIN - OIL SYSTEM RECOMMENDED 2 | 1 | |
| 956A8674G03 | ADAPTER, DRAIN - OIL SYSTEM | 2 | |
| 956A8679 | ADAPTER - LOCK - CORE ENGINE | 1 | |
| 956A8679G01 | Adapter-Locking, Core Engine | 4 | |
| 956A8902 | ADAPTER - REMOVE/INSTALL - TGB | 1 | |
| 956A8931 | ADAPTER - DRIVE SPLINES - GEAR - TGB/AGB | 1 | |
| 956A8935 | ADAPTER - FLOW CHECK - AGB | 1 | |
| 956A8940 | ADAPTER - FLOW CHECK - AGB | 1 | |
| 97A21102055000 | ADAPTER-APU BLEED AIR SYSTEM | 1 | |
| 97A28002063000 | BLANK ADAPTER-WING CENTER BOX VENTILATION.SYSTEM | 1 | |
| 97A28002156000 | ADAPTER ASSEMBLY-WING CENTER BOX | 1 | |
| 97A28002200000 | ADAPTER-DRAINAGE SYSTEM | 1 | |
| 97A28002202000 | ADAPTER - ECOLOGICAL DRAINING SYSTEM | 1 | |
| 97A28002534000 | ADAPTER-VENTING, VAPOR SEAL | 8 | |
| 97A28002542000 | ADAPTER - DRAIN MAST | 9 | |
| 97A28002549000 | ADAPTER - TRIM TANK FEED THRU TEST | 5 | |
| 97A76102003000 | ADAPTER-SPRING SCALE,THROTTLE CONTROL LEVER | 8 | |
| 97A76102008000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 97F28001007000 | ADAPTER-DOUBLE WALL ENGINE PYLON | 1 | |
| 980-101-000-011 | CABLE - ADAPTER, ADVANCED AIRBORNE VIBRATION MONITOR | 2 | |
| 980N-1 | ASI-203 ALTIMETER TEST SET WITH CABLE ADAPTER | 8 | |
| 983-4195-140 | SUB-LEVEL ADAPTER ASSEMBLY | 1 | |
| 9898AMS172349003 | ADAPTER-WRENCH | 1 | |
| 98A070030907206 | ADAPTER JACK - SAFETY JACKING // TAIL JACK P/N:HS | 1 | |
| 98A07003906 | ADAPTER-LOAD CELL | 1 | |
| 98A07003906200 | ADAPTER-FOR LOADCELL | 15 | |
| 98A07003906200-REVC | ADAPTER-FOR LOADCELL | 1 | |
| 98A07003906202 | ADAPTER-LOAD CELL | 1 | |
| 98A07003907 | ADAPTER-LOAD CELL | 1 | |
| 98A07003907200 | ADAPTER-FOR LOADCELL | 15 | |
| 98A07003907206 | ADAPTER JACK - SAFETY JACKING // TAIL JACK P/N:HS | 5 | |
| 98A07003911200 | ADAPTER-LOAD CELL | 12 | |
| 98A10108300000 | ADAPTER-HEATING,APU | 1 | |
| 98A12003003000 | ADAPTER-AIR EVACUATION | 1 | |
| 98A12003009000 | ADAPTER - GROUND CONNECTION | 1 | |
| 98A21001502000 | PROTECTIVE PLATE-ADAPTER | 3 | |
| 98A27407514200 | ADAPTER, A330-200, COMPLETE | 1 | |
| 98A27407518000 | ADAPTER MINI-HOIST ATACHMENT | 2 | |
| 98A27407565000 | ADAPTER - MANUAL MOVEMENT, T.H.S. ACTUATOR | 2 | |
| 98A27408322200 | HOOK WRENCH-ADAPTER | 1 | |
| 98A27408322202 | HOOK WRENCH-ADAPTER | 1 | |
| 98A27408322204 | HOOK WRENCH-ADAPTER | 1 | |
| 98A27408322206 | HOOK WRENCH-ADAPTER | 1 | |
| 98A27508061000 | ADAPTER-FLAP DRIVE SHAFT,WING | 1 | |
| 98A27508062000 | ADAPTER - FLAP DRIVE SHAFT LH-RH WING | 3 | |
| 98A27804001000 | ADAPTER-TORQUE TEST | 5 | |
| 98A27808003000 | Adapter fuer torque shaft drive tool-24 teeth | 3 | |
| 98A27808003001 | Adapter fuer torque shaft drive tool-24 teeth | 15 | |
| 98A28002534000 | ADAPTER-VENTING, VAPOR SEAL | 1 | |
| 98A28007570 | ADAPTER - VENT AND DRAIN VALVE, APU | 1 | |
| 98A2800757000 | ADAPTER - VENT AND DRAIN VALVE, APU/ APU | 4 | |
| 98A28007570000 | ADAPTER - VENT AND DRAIN VALVE, APU | 37 | |
| 98A28101000000 | ADAPTER PIPE- WATER DRAINING FROM FUEL | 26 | |
| 98A28104030000 | ADAPTER-BANJO | 10 | |
| 98A28108001000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 6 | |
| 98A28108465000 | ADAPTER - WATER DRAIN | 5 | |
| 98A29001010000 | ADAPTER-HYDRAULIC TANK TOPPING UP UNIT | 1 | |
| 98A32103003000 | ADAPTER-TORQUE | 7 | |
| 98A35207599 | HOSE-ADAPTER,ALTITUDE SWITCH | 1 | |
| 98A35207599000 | HOSE-ADAPTER,ALTITUDE SWITCH | 25 | |
| 98A38308235000 | ADAPTER - ALTITUDE PRESSURE SWI | 2 | |
| 98A38308456000 | ADAPTER-ALTITUDE PRESSURE SWITCH | 1 | |
| 98A54403007000 | ADAPTER-PYLON-TO-DYNAMOMETRIC CELL | 1 | |
| 98A54403024000 | ADAPTER - DYNAMOMETRIC | 8 | |
| 98A54403024001 | ADAPTER-DYNAMOMETRIC AT RIB 1 FOR NDT | 7 | |
| 98A54403024002 | ADAPTER - DYNAMOMETRIC | 6 | |
| 98A54403024003 | ADAPTER-DYNAMOMETRIC AT RIB 1 FOR NDT | 10 | |
| 98A55308595000 | ADAPTER - SUPPORT, RUDDER | 1 | |
| 98A57104004000 | ADAPTER-TORQUE WRENCH | 6 | |
| 98A76103003000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 98A76103004000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 5 | |
| 98AMS172321 | Hook Wrench-Adapter | 2 | |
| 98AMS172321000 | ADAPTER - WRENCH | 10 | |
| 98AMS172321002 | ADAPTER-WRENCH | 13 | |
| 98AMS172321003 | ADAPTER-WRENCH | 13 | |
| 98AMS172322002 | ADAPTER-WRENCH | 9 | |
| 98AMS172322003 | ADAPTER-WRENCH | 8 | |
| 98AMS172322004 | WRENCH-ADAPTER | 2 | |
| 98AMS172322005 | WRENCH-ADAPTER | 9 | |
| 98AMS172323000 | HOOK WRENCH - ADAPTER | 1 | |
| 98AMS172323002 | ADAPTER-WRENCH | 9 | |
| 98AMS172323003 | ADAPTER-WRENCH | 3 | |
| 98AMS172324002 | ADAPTER-WRENCH | 4 | |
| 98AMS172324003 | ADAPTER-WRENCH | 4 | |
| 98AMS172325002 | ADAPTER-WRENCH | 4 | |
| 98AMS172325003 | ADAPTER-WRENCH | 3 | |
| 98AMS172326002 | ADAPTER-WRENCH | 4 | |
| 98AMS172326003 | ADAPTER-WRENCH | 6 | |
| 98AMS172327 | HOOK WRENCH- ADAPTER | 1 | |
| 98AMS172327-003 | WRENCH-ADAPTER | 9 | |
| 98AMS172327-02 | Hook wrench-adapter | 1 | |
| 98AMS172327000 | HOOK WRENCH - ADAPTER | 2 | |
| 98AMS172327002 | WRENCH-ADAPTER | 12 | |
| 98AMS172327003 | WRENCH-ADAPTER | 9 | |
| 98AMS172328002 | ADAPTER-WRENCH | 4 | |
| 98AMS172328003 | WRENCH-ADAPTER | 9 | |
| 98AMS172329000 | HOOK WRENCH -0 ADAPTER | 1 | |
| 98AMS172329002 | ADAPTER-WRENCH | 8 | |
| 98AMS172329003 | ADAPTER-WRENCH | 8 | |
| 98AMS172330002 | ADAPTER-WRENCH | 4 | |
| 98AMS172330003 | ADAPTER-WRENCH | 7 | |
| 98AMS172331002 | ADAPTER-WRENCH | 4 | |
| 98AMS172331003 | ADAPTER-WRENCH | 4 | |
| 98AMS172332002 | ADAPTER-WRENCH | 7 | |
| 98AMS172332003 | ADAPTER-WRENCH | 7 | |
| 98AMS172332004 | WRENCH - ADAPTER | 1 | |
| 98AMS172332005 | WRENCH - ADAPTER | 1 | |
| 98AMS172333 | HOOK WRENCH- ADAPTER | 1 | |
| 98AMS172333000 | HOOK WRENCH - ADAPTER | 2 | |
| 98AMS172333002 | ADAPTER-WRENCH | 13 | |
| 98AMS172333003 | ADAPTER-WRENCH | 10 | |
| 98AMS172334002 | ADAPTER-WRENCH | 5 | |
| 98AMS172334003 | ADAPTER-WRENCH | 5 | |
| 98AMS172335 | ADAPTER-WRENCH | 1 | |
| 98AMS172335001 | HOOK WRENCH-ADAPTER | 1 | |
| 98AMS172335002 | ADAPTER-WRENCH | 8 | |
| 98AMS172335003 | ADAPTER-WRENCH | 10 | |
| 98AMS172336002 | ADAPTER-WRENCH | 4 | |
| 98AMS172336003 | ADAPTER-WRENCH | 3 | |
| 98AMS172337 | ADAPTER-WRENCH | 1 | |
| 98AMS172337002 | ADAPTER-WRENCH | 11 | |
| 98AMS172337003 | ADAPTER-WRENCH | 9 | |
| 98AMS172339002 | WRENCH-ADAPTER | 3 | |
| 98AMS172339003 | WRENCH-ADAPTER | 3 | |
| 98AMS172341000 | WRENCH-ADAPTER | 1 | |
| 98AMS172341002 | WRENCH-ADAPTER | 11 | |
| 98AMS172341003 | ADAPTER-WRENCH | 10 | |
| 98AMS172343002 | WRENCH-ADAPTER | 2 | |
| 98AMS172343003 | WRENCH-ADAPTER | 2 | |
| 98AMS172344000 | HOOK WRENCH - ADAPTER | 1 | |
| 98AMS172344002 | WRENCH-ADAPTER | 9 | |
| 98AMS172344003 | ADAPTER-WRENCH | 6 | |
| 98AMS172345002 | ADAPTER-WRENCH | 5 | |
| 98AMS172345003 | ADAPTER-WRENCH | 5 | |
| 98AMS172348002 | WRENCH-ADAPTER | 5 | |
| 98AMS172348003 | ADAPTER-WRENCH | 5 | |
| 98AMS172349000 | WRENCH-ADAPTER FOR MS172349 SCHLUESSELADAPTER FUER MS172349 | 1 | |
| 98AMS172349002 | WRENCH-ADAPTER | 11 | |
| 98AMS172349003 | ADAPTER-WRENCH | 9 | |
| 98AMS1723ALL | ADAPTER - HOOK WRENCH | 1 | |
| 98C-111-N | ADAPTER - FIBER OPTIC, LC-LC CONNECTOR | 1 | |
| 98D07103500000 | JACK ADAPTER-FUSELAGE | 32 | |
| 98D07203006000 | ADAPTER-JACKING FR.8 | 1 | |
| 98D07203015000 | Jack Adapter-Pylon | 5 | |
| 98D27407517000 | TOOL SET-R I,THS OR WRENCH-ADAPTER - SECONDARY PINS | 21 | |
| 98D27504035000 | ADAPTER-TORQUE-TRUNNION NUT | 20 | |
| 98D27804001000 | ADAPTER- DRIVE, SLAT( AND FLAP) | 29 | |
| 98D28108293000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 19 | |
| 98D28108293001 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 8 | |
| 98D281082930011 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 1 | |
| 98D28108293002 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 12 | |
| 98D28108559000 | ADAPTER - TUBE, DRAIN VALVE | 8 | |
| 98D28108560000 | ADAPTER - TUBE, WATER DRAIN | 7 | |
| 98D28108560040-200 | ADAPTER - TUBE, WATER DRAIN | 1 | |
| 98D28108560202 | ADAPTER - TUBE, WATER DRAIN | 1 | |
| 98D28108562000 | ADAPTER, PRESSURE DRAIN-ACT | 11 | |
| 98D29003502009 | ITEM 9 ADAPTER - TMHDI1611 | 1 | |
| 98D323030000 | ADAPTER-WRENCH KIT | 1 | |
| 98D32303000000 | ADAPTER-WRENCH | 26 | |
| 98D32303000200 | ADAPTER-WRENCH NUT MS172331 | 3 | |
| 98D32303000201 | ADAPTER-WRENCH NUT MS172321 | 9 | |
| 98D32303000202 | ADAPTER-WRENCH NUT MS172333 | 2 | |
| 98D32403001000 | ADAPTER BRAKE UNIT NUTadapter - brake unit nut | 19 | |
| 98D32403005000 | ADAPTER- BRAKE UNIT | 19 | |
| 98D324030050000 | ADAPTER- BRAKE UNIT | 1 | |
| 98D32403005001 | ADAPTER- BRAKE NUT UNIT | 23 | |
| 98D34003500-103 | ADAPTER/COVER-STATIC PORT | 9 | |
| 98D34003500000 | ADAPTER COVER-STATIC PORT | 31 | |
| 98D34003500000-102 | ADAPTER/COVER-STATIC PORT | 2 | |
| 98D34003500100 | ADAPTER COVER - STATIC PORT | 9 | |
| 98D34003500102 | ADAPTER COVER - STATIC PORT | 5 | |
| 98D34003500103 | ADAPTER COVER - STATIC PORT | 9 | |
| 98D34103000000 | ADAPTER-COVER STATIC PROBE | 13 | |
| 98D34103002000 | ADAPTERS - AIR DATA SYSTEM FLUSHING | 32 | |
| 98D34103002100 | ADAPTER - AIR DATA SYSTEM FLUS | 13 | |
| 98D34103002102 | ADAPTER - AIR DATA SYSTEM FLUS | 12 | |
| 98D34103003000 | ADAPTER, PITOT - PNEUMATIC CLEANER | 21 | |
| 98D36109004000 | ADAPTER KIT - BLEED TEST SET | 6 | |
| 98D38308234000 | ADAPTER - ALTITUDE PRESSURE SWITCH | 1 | |
| 98D38308234001 | ADAPTER - ALTITUDE PRESSURE SWITCH | 13 | |
| 98D4920900100 | ADAPTER - VENT AND DRAIN VALVE, APU | 1 | |
| 98D49209002000 | ADAPTER - VENT AND DRAIN VALVE, APU | 4 | |
| 98D49209002001 | ADAPTER - VENT AND DRAIN VALVE, APU | 5 | |
| 98D54503001000 | WRENCH HOOK - ADAPTER | 9 | |
| 98D55109001000 | Adapter-Water Drain- issC | 9 | |
| 98D55109002000 | Adapter-Water Drain- Iss A | 9 | |
| 98D55109010200 | ADAPTER-UPPER | 1 | |
| 98D55109010202 | ADAPTER-LOWER | 1 | |
| 98D57508791000 | ADAPTER-TORQUE | 1 | |
| 98D71203006234 | ADAPTER FOR LEFT FWD TORQUE WRENCH FOR PW6000 ENGINE R-I | 1 | |
| 98D71203006235 | ADAPTER FOR RIGHT FWD TORQUE WRENCH FOR PW6000 ENGINE R-I | 1 | |
| 98D71203022-001 | ADAPTER-TROLLEY R/I IDG (PW AND CFM) | 5 | |
| 98D71203022000 | ADAPTER - TROLLEY R/I IDG (PW AND CFM) | 11 | |
| 98D71203022001 | ADAPTER-TROLLEY R/I IDG (PW AND CFM) | 5 | |
| 98DAMS172321002 | ADAPTER-WRENCH | 1 | |
| 98DAMS172321002 | ADAPTER - WRENCH | 1 | |
| 98F070108635000 | ADAPTER-AFT,JACKING | 1 | |
| 98F07101003000 | ADAPTER-JACK NOSE | 4 | |
| 98F07103500001 | ADAPTER, JACK - NOSE | 20 | |
| 98F07107501000 | ADAPTER-AFT,JACKING | 17 | |
| 98F07108635000 | ADAPTER-AFT,JACKING | 14 | |
| 98F12108458000 | ADAPTER - FILLING, GEARBOX | 8 | |
| 98F27508121000 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F27508121001 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F27508233001 | WRENCH-ADAPTER | 2 | |
| 98F27508233002 | WRENCH-ADAPTER | 1 | |
| 98F27508278000 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508278001 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508278002 | ADAPTER - RIGGING, OUTER FLAPS | 4 | |
| 98F27508278003 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508278004 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
| 98F27508302000 | Messadapter gage-tape extflap | 9 | |
| 98F27508726000 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F27508726001 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F32104000040 | ADAPTER ASSY-AFT EXTN | 1 | |
| 98F32104000046 | ADAPTER ASSY,AFT-EXTRN | 1 | |
| 98F32104000048 | ADAPTER ASSY,AFT-INSN | 1 | |
| 98F32204002000 | ADAPTER-HANDLING TROLLEY,CLG | 1 | |
| 98F32304000000 | ADAPTER-PITOT PROBE | 38 | |
| 98F34103000000 | ADAPTER-COVER STATIC PROBE | 16 | |
| 98F34103000001 | ADAPTER,COVER-STATIC PROBE | 7 | |
| 98F34103000102 | KIT-ADAPTER COVER, STATIC | 2 | |
| 98F34103001000 | ADAPTER-PITOT PROBE | 16 | |
| 98F34103004000 | ADAPTER-PITOT PROBE | 1 | |
| 98F49208240000 | ADAPTER - TORQUE (SQUARE DRIVE 1-2, HEX SIZE 9-16 IN) | 10 | |
| 98F49208240001 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 12 | |
| 98F49208240200 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | 1 | |
| 98F49208240202 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | 1 | |
| 98F49208240208 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | 1 | |
| 98F49208240210 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | 1 | |
| 98F49209001000 | ADAPTER - TORQUE | 5 | |
| 98F54003008000 | ADAPTER-DYNAMOMETRIC CELL R1 (NDT) | 1 | |
| 98F54003008001 | ADAPTER ADAPTER -0 DYNAMOMETRIC AT RIB 1 | 1 | |
| 98F54003008002 | ADAPTER ADAPTER -0 DYNAMOMETRIC AT RIB 1 | 2 | |
| 98F54003008003 | ADAPTER-DYNAMOMETRIC CELL R1 (NDT) | 6 | |
| 98F57508702000 | ADAPTER-WRENCH,INBOARD FLAP | 4 | |
| 98F57508702001 | ADAPTER-WRENCH,INBOARD FLAP | 5 | |
| 98F57508703000 | ADAPTER-WRENCH | 6 | |
| 98F57508703001 | ADAPTER-WRENCH | 8 | |
| 98F57508736000 | WRENCH-HOOK,ADAPTER | 7 | |
| 98F57508736001 | WRENCH-ADAPTER | 6 | |
| 98F57508737000 | WRENCH-ADAPTER | 3 | |
| 98F57508737001 | WRENCH-ADAPTER | 3 | |
| 98F71201001104 | Adapter,GSE - RRT700 AFT | 5 | |
| 98F71203503000 | Adapter- BS/cradle, A340 | 8 | |
| 98L07008510000 | ADAPTER-SUPPORT, AFT JACKING | 1 | |
| 98L07008510001 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 4 | |
| 98L07008510202 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510204 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510206 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510208 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07101000000 | ADAPTER, JACK - NOSE | 4 | |
| 98L07203003000 | ADAPTER-LOAD CELL | 2 | |
| 98L07209001000 | ADAPTER,SHORING-THS | 2 | |
| 98L24209005000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 1 | |
| 98L27208453000 | ADAPTER, TURN BARREL - RUDDER | 3 | |
| 98L27209010000 | ADAPTER-TURN BARREL, LOWER RUDDER | 3 | |
| 98L27209010200 | ADAPTER T.B.-LOW RUD | 1 | |
| 98L27209010202 | ADAPTER T.B.-LOW RUD | 1 | |
| 98L27209010204 | ADAPTER T.B.-LOW RUD | 1 | |
| 98L27209011000 | ADAPTER, LIFTING - UPPER AND LO | 2 | |
| 98L27209015000 | ADAPTER-TURN BARREL,UPPER RUDDER | 4 | |
| 98L27309008000 | ADAPTER KIT-EHA OR SERVOCONTROL | 4 | |
| 98L27503000000 | ADAPTER-FLAP PCU | 4 | |
| 98L27803000000 | ADAPTER-SLAT PCU | 4 | |
| 98L28004033000 | ADAPTER ASSY-BLD/INFL | 1 | |
| 98L29203001000 | ADAPTER-FORWARD LEGHS | 1 | |
| 98L29203002000 | ADAPTER-AFTWARD LEGHS | 2 | |
| 98L34203500000 | ADAPTER,COVER STATIC PROBE-STAND BY | 1 | |
| 98L36103002044 | ADAPTER M-M7/16 | 5 | |
| 98L36103002064 | ADAPTER M7/16-M3/8 | 3 | |
| 98L36103002072 | TEST-PORT ADAPTER | 5 | |
| 98L55308525000 | ADAPTER, SUPPORT STAND - RUDDER | 1 | |
| 98L57508757000 | Wrench-adapter | 1 | |
| 98L57508757001 | Wrench-adapter | 2 | |
| 98L57508758000 | Wrench-adapter | 1 | |
| 98L57508758001 | Wrench-adapter | 1 | |
| 98L57508759000 | Wrench-adapter | 1 | |
| 98L57508759001 | Wrench-adapter | 2 | |
| 98L57508760000 | Wrench-adapter | 1 | |
| 98L57508760001 | Wrench-adapter | 2 | |
| 98NSA506306000 | WRENCH-HOOK ADAPTER | 5 | |
| 98NSA506307000 | WRENCH-HOOK ADAPTER | 4 | |
| 98NSA506308000 | WRENCH-HOOK ADAPTER | 3 | |
| 98NSA506310000 | WRENCH-HOOK,ADAPTER | 5 | |
| 98NSA506312000 | WRENCH-HOOK,ADAPTER | 6 | |
| 98NSA506314000 | WRENCH-HOOK,ADAPTER | 5 | |
| 98NSA506316000 | WRENCH-HOOK,ADAPTER | 5 | |
| 98NSA506320000 | WRENCH-HOOK,ADAPTER | 5 | |
| 98NSA506324000 | WRENCH-HOOK,ADAPTER | 5 | |
| 98NSA5063ALL | ADAPTER - HOOK WRENCH | 1 | |
| 98S07003000001 | ADAPTER-JACK,WING § AFT FUSELAGE | 16 | |
| 98S07008010000 | ADAPTER-JACK,FWD FUSELAGE | 19 | |
| 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | |
| 98S27003002000 | ADAPTER-MANUAL DRIVE,TRIM ACTR | 10 | |
| 98S28005002000 | ADAPTER CABLE - FCU | 2 | |
| 98S32008125000 | L/G Emer-Park Brk Adapter | 4 | |
| 98S57003029000 | ADAPTER-LOAD RELIEF(COMPLETE SET) | 8 | |
| 98S57003029040 | ADAPTER LOAD RELIEF LH-RH | 4 | |
| 98S57003029041 | ADAPTER LOAD RELIEF LH-RH | 4 | |
| 98S57003030000 | ADAPTER- LOAD RELIEF | 5 | |
| 98S61005002000 | ADAPTER-TORQUE WRENCH | 6 | |
| 98V07104003000 | ADAPTER-WING JACKING | 6 | |
| 98V07109001000 | ADAPTER - AFT JACKING | 6 | |
| 98V07109001001 | ADAPTER - AFT JACKING | 2 | |
| 98V21308764000 | ADAPTER-TEST,ORVD | 3 | |
| 98V25508833000 | ADAPTER-CCRC ASSEMBLY | 1 | |
| 98V36109001000 | Adapter kit-bleed | 5 | |
| 98a27208514040 | ADAPTER FOR METALL-RUDER | 1 | |
| 98a27208514042 | ADAPTER FOR CFK-RUDER | 1 | |
| 98a28108001000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 6 | |
| 98a28108001100 | ADAPTER-WATER DRAIN | 1 | |
| 99-2645 | NOSE ADAPTER - HUCK | 7 | |
| 99-791-509 | ADAPTER CABLE-ANTI SKID TEST | 1 | |
| 99-791-511 | ADAPTER - ANTISKID TEST SET CABLE | 2 | |
| 99-791-563 | ANTI-SKID ADAPTER CABLE (560-0260 THRU 0538) | 1 | |
| 99-791-571 | ADAPTER CABLE ASSEMBLY -- ANTI-SKID | 1 | |
| 99-8057-6000 | KIT-PITOT STATIC TEST ADAPTER | 8 | |
| 99-8088-9000 | MEASURING ADAPTERS - | 2 | |
| 99-8107-6000 | ADAPTER-RIGHT ANGLE DRIVE | 5 | |
| 99-TD03001-2 | ADAPTER_B747 FUEL TANK DRAIN_B747 FUEL TANK DRAIN_[99-TD03001-2] | 1 | |
| 99046 | 724-PSEU - ADAPTER, 100-240 VAC IN, 24VDC 0.25A OUT, UK & EURO PLUGS | 1 | |
| 99127-231 | A320 ON-WING ADAPTER (CTL) | 2 | |
| 99127-281 | BLEED ADAPTER KIT (LEAP-1 A) | 2 | |
| 994202 | 3/8 ROUND DOUBLE-SQUARE ADAPTER | 1 | |
| 994204 | 3/8 ROUND DOUBLE-SQUARE ADAPTER | 1 | |
| 997-71-572 | ANTI-SKID ADAPTER CABLE (560-00539 THRU 5000) | 1 | |
| 9970-957-145 | FLANGE, ADAPTER - LUBRICATION UNIT | 1 | |
| 9970-957-195 | FLANGE, ADAPTER - LUBRICATION UNIT | 1 | |
| 9970-957-199 | ADAPTER, PULLER - COVER, PUMP ASSY | 1 | |
| 9970-957-526 | "TOOL SET - LEAK TEST, ADAPTER TEST LUBRICATION UNIT" | 1 | |
| 999-111 | Adapter - Fiber Optic, LC-LC Connector | 1 | |
| 99A00505 | ADAPTER WRENCH -0 SUMP DRAIN | 1 | |
| 99A28404000000 | ADAPTER-SEQUENCE VALVE | 12 | |
| 99A34103001000 | ADAPTER-CHARGING , STATIC PORT | 7 | |
| 99A34103002000 | COVER ADAPTER-BLANKING CHARGING,STATIC PORT | 8 | |
| 99D46209001000 | ADAPTER-COAX | 2 | |
| 99L44508762000 | ADAPTER-CVMS,ACCESS | 1 | |
| 99L44508762001 | ADAPTER-CVMS, ACCESS | 1 | |
| 99V44508001000 | ADAPTER-ACCESS CVMS | 1 | |
| 9BD28108293001 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER | 1 | |
| 9C1018 | ADAPTER - MANIFOLD PRES. CHK. | 1 | |
| 9C1194 | ADAPTER - LOCKING-AGB/TGB | 1 | |
| 9C1204 | ADAPTER - JACK STAND-IDG | 1 | |
| 9C1204801 | ADAPTER - JACKSTAND, 8E90 108 | 1 | |
| 9C1204G01 | ADAPTER-JACKSTAND | 6 | |
| 9C1261 | ADAPTER, GE90-115B | 1 | |
| 9C1378 | ADAPTER SET - LIFT - AFT ENGINE | 1 | |
| 9C1393 | ADAPTER SET HYR-VSS & ACTUATOR | 1 | |
| 9C1393G01 | Set -Adapter, VSV/VBV | 2 | |
| 9C1455 | ADAPTER SET-LIFT AND TURN PROPULSOR, AFT | 1 | |
| 9C1457 | ADAPTER SET, INSTALL/REMOVE-TRIM BALANCE CLIP, STG 6 LPT | 1 | |
| 9C1700G02 | Wrench - Adapter | 3 | |
| 9C2115 | ADAPTER - WRENCH (ADVANCE) (ADAPTER) | 1 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | 1 | |
| 9C2122 | ADAPTER - WRENCH (ADVANCE) (ADAPTER) | 1 | |
| 9C2122G03 | TORQUING/LOOSENING WRENCH ADAPTER - NUT SEAL ROTATING AIR | 1 | |
| 9C2126G01 | ADAPTER RING SPOOL 7-9 | 1 | |
| 9C2161 | ADAPTER RING - SPOOL STAGES 7-9 | 1 | |
| 9C2231 | ADAPTER RING SPOOL 2-5 | 1 | |
| 9C2232G01 | ADAPTER RING STAGE 2-5 SPOOL | 1 | |
| 9C2233G01 | ADAPTER RING STAGE 7-9 | 1 | |
| 9C2269G01 | REAR BALANCING ADAPTER - HPCR SPOOL 2-5 | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| 9C3138 | ADAPTER, KIT-TUBE EXTENSION | 1 | |
| 9C3403G01 | ADAPTER, INSTALL/REMOVAL - LINE REPLACEABLE UNITS | 1 | |
| 9C3407 | ADAPTER - VACUUM - C- SUMP AOS | 1 | |
| 9C6018 | ADAPTER, LIFT-ENGINE, FWD | 1 | |
| 9C6018G01 | IF ENGINE WITHOUT MOUNTS - FWD ADAPTER | 1 | |
| 9C6022G01 | Adapter, Lift - Aft Engine | 1 | |
| 9PTK | MD80/MD90/DC-9 PITOT STATIC ADAPTER KIT | 1 | |
| A-77.02.1 | ROTATING PROBE ADAPTER (CONNECTOR OF 4 PIN FISHER - 1 END MALE, 1 END FEMALE) | 1 | |
| A-C148659-1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A-C148659-113 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A034017-24 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK AND FLUSHING | 1 | |
| A07001-1 | Jack Adapter-Forward Body | 1 | |
| A07001-11 | Jack Adapter - Forward Body | 16 | |
| A07001-11 | ACK ADAPTER - FORWARD BODY | 16 | |
| A07003-1 | JACK ADAPTER - OUTBOARD WING | 14 | |
| A07005-1 | HOIST ADAPTER - AIRPLANE RECOVERY | 1 | |
| A07005-2 | HOIST ADAPTER - AIRPLANE RECOVERY | 1 | |
| A12005-1 | LUBRICATION ADAPTER - ATTACH FITTING, WING/NACELLE | 11 | |
| A12007-11 | ADAPTER - TIRE INFLATION | 4 | |
| A12007-12 | ADAPTER - TIRE INFLA | 1 | |
| A12007-20 | ADAPTER - TIRE INFLATION | 7 | |
| A12007-23 | ADAPTER - TIRE INFLATION | 10 | |
| A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 12 | |
| A158068-501 | Kit - Bleed Air Tube (Adapters Set) | 5 | |
| A158068‐501 | Kit - Bleed Air Tube (Adapters Set) | 5 | |
| A21001-1 | HOIST ADAPTER - A/C PACK | 1 | |
| A21001-44 | HOIST ADAPTERS - AIR CONDITIONING PACK | 13 | |
| A21001-45 | HOIST ADAPTERS - AIR CONDITIONING PACK | 10 | |
| A21003-1 | TUBING TEST ADAPTER - P/N A21003-1 | 1 | |
| A21010-188 | ADAPTER - PPRV REMOTE STATIC PORT (PART OF SPL-6692) | 4 | |
| A21010-190 | ADAPTER - PPRV REMOTE STATIC PORT | 9 | |
| A21010-203 | ADAPTER - PPRV REMOTE STATIC PORT | 12 | |
| A21013-50 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 2 | |
| A21013-50-M | HOIST ADAPTER EQPT- | 1 | |
| A23001-1 | ADAPTER CABLE - RANDOM NOISE GENERATOR | 2 | |
| A24008-27 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 4 | |
| A24008-37 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 11 | |
| A24011-1 | HOIST ADAPTER ASSEMBLY - INTEGRATED DRIVE GENERATOR | 13 | |
| A240111 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 13 | |
| A2527576301200 | ADAPTER-HANDLE | 1 | |
| A26001-131 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-132 | CABLE -0 ADAPTER | 1 | |
| A26001-134 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-135 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 7 | |
| A26001-136 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-137 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-138 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-139 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-144 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-145 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-148 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-175 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-176 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-192 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-24 | CABLE -0 ADAPTER | 4 | |
| A26001-4 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 1 | |
| A26001-5 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 2 | |
| A26002-36 | ADAPTER CABLE - TIME DELAY, CARGO FIRE EXTINGUISHING BOTTLE TEST BOX | 10 | |
| A27004-1 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE | 3 | |
| A27004-2 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE | 4 | |
| A27021 | ADAPTER EQUIPMENT - CONTROL WHEELS | 1 | |
| A27021 REV G | ADAPTER EQUIPMENT - CONTROL WHEELS | 1 | |
| A27021-124 | ADAPTER EQUIPMENT - CONTROL WHEEL | 2 | |
| A27021-125 | ADAPTER EQUIPMENT - CONTROL WHEEL | 4 | |
| A27021-17 | Retainer-Adapter Control | 1 | |
| A27021-29 | Adapter Equipment - Control Wheels | 16 | |
| A27021-30 | Adapter equipment-control wheels | 5 | |
| A27021-69 | ADAPTER EQUIPMENT - CONTROL WHEEL | 13 | |
| A27021-96 | ADAPTER EQUIPMENT - CONTROL WHEEL | 9 | |
| A27021-97 | ADAPTER EQUIPMENT - CONTROL WHEEL | 10 | |
| A27021-98 | ADAPTER EQUIPMENT - CONTROL WHEEL | 13 | |
| A27021-99 | Base-Adapter Control | 1 | |
| A27031-29 | ADAPTER EQPT - WHEEL | 1 | |
| A27035-1 | Screwdriver - Adapter Rudder/Elevator Feel Actuator Cylinder | 3 | |
| A27063-107 | ADAPTER CABLE - TLA (FOR FADEC GE-CF6-80C2F ENGINES) | 2 | |
| A27063-113 | ADAPTER CABLE - TLA | 1 | |
| A27063-114 | ADAPTER CABLE - TLA | 1 | |
| A27063-115 | ADAPTER CABLE - TLA | 3 | |
| A27063-116 | ADAPTER CABLE - TLA | 3 | |
| A27063-124 | ADAPTER CABLE - CONTROL WHEEL POSITION (FOR 767 PRIOR TO L/N 801) | 1 | |
| A27063-125 | ADAPTER CABLE - CONTROL WHEEL POSITION (FOR 767 PRIOR TO L/N 801) | 1 | |
| A27063-126 | ADAPTER CABLE - CAPTAIN RUDDER PEDAL POSITION (FOR 767 PRIOR TO L/N 801) | 1 | |
| A27063-18 | ADAPTER CABLE - AILERON/ ELEVATOR/ RUDDER / COLUMN & WHEEL | 4 | |
| A27063-19 | ADAPTER CABLE - AILERON/ ELEVATOR/ RUDDER / COLUMN & WHEEL | 4 | |
| A27063-20 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 4 | |
| A27063-21 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 4 | |
| A27063-22 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
| A27063-23 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
| A27063-24 | ADAPTER CABLE - TLA/ SPOILER/ SPEEDBRAKE | 1 | |
| A27063-25 | ADAPTER CABLE - TLA/ SPOILER/ SPEEDBRAKE | 1 | |
| A27063-26 | ADAPTER CABLE - THRUST REVERSER/ ELEVATOR/ RUDDER | 2 | |
| A27063-27 | ADAPTER CABLE - THRUST REVERSER/ ELEVATOR/ RUDDER | 2 | |
| A27063-28 | ADAPTER CABLE - ELEVATOR/ FLAP PDU/ SLAT CDU | 2 | |
| A27063-30 | ADAPTER CABLE-SLAT POWER LEVEL ANGLE | 2 | |
| A27063-31 | ADAPTER CABLE-SLAT PDU/ POWER LEVEL ANGLE | 2 | |
| A27063-32 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 2 | |
| A27063-33 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 2 | |
| A27063-34 | ADAPTER CABLE - SPOILER/ SPEED BRAKE/ TLA | 1 | |
| A27063-35 | ADAPTER CABLE - SPOILER/ SPEED BRAKE/ TLA | 1 | |
| A27063-36 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 1 | |
| A27063-37 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 1 | |
| A27063-40 | ADAPTER CABLE - AUTO PILOT LATERAL CONTROL SERVO | 1 | |
| A27063-41 | ADAPTER CABLE - AUTO PILOT LATERAL CONTROL SERVO | 1 | |
| A27063-84 | ADAPTER CABLE - FLAP/ SLAT/ (ARINC 429 METHOD) | 2 | |
| A27063-92 | ADAPTER CABLE - SLAT PDU (FOR 767 L/N 403 AND ON) | 2 | |
| A27063-93 | ADAPTER CABLE - SLAT PDU (FOR 767 L/N 403 AND ON) | 2 | |
| A27063-94 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 2 | |
| A27063-95 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 3 | |
| A27063-96 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
| A27063-97 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A27077-1 | ADAPTER - LEADING EDGE SLAT DRIVE | 7 | |
| A27077-1-ML | ADAPTER-MFD PARTS LESS | 1 | |
| A27078-7 | SPLINE ADAPTERS - LEADING EDGE SLAT DRIVE ROTARY ACTUATORS AND GEARBOXES | 1 | |
| A27093-28 | ADAPTER CABLE (PART OF A27093-27) | 1 | |
| A27097-1 | ADAPTER - PROTRACTOR, THRUST REVERSER LEVER | 3 | |
| A27102-7 | ADAPTER - LEADING EDGE SLAT AND TRAILING EDGE FLAP, MANUAL DRIVE | 14 | |
| A27102-8 | ADAPTER - LE SLAT and TE FLAP, MANUAL DRIVE | 1 | |
| A27117-1 | SPLINE ADAPTER (A27117-4 INCLUDED IN A27117-1 TEST EQPT) | 8 | |
| A28005-24 | TEST EQPT - 767 ADAPTER ASSY | 10 | |
| A28005-43 | TEST EQPT - 777 ADAPTER ASSY | 3 | |
| A28005-48 | ADAPTER - LEAK TEST, | 21 | |
| A28005-81 | Assembly - Adapter, APU Fuel Line Shroud | 6 | |
| A28005-82 | ASSEMBLY - ADAPTER , APU FUEL LINE SHROUD | 9 | |
| A28013-10 | ADAPTER EQUIPMENT - AIR SUPPLY, SURGE TANK | 1 | |
| A28013-11 | ADAPTER EQUIPMENT - AIR SUPPLY, SURGE TANK | 1 | |
| A28014-1 | PHASE CHECKING EQPT - PUMP, GROUND FAULT INTERRUPTER (USE BREAKOUT BOX A28014-2 AND ADAPTER CABLE ASSY A28014-3 WHICH ARE THE SUB-END ITEMS OF A28014-1) | 7 | |
| A29001-1 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 6 | |
| A29001-19 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 3 | |
| A29001-2 | ADAPTER -0 WELDMENT | 1 | |
| A29001-20 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 2 | |
| A31007 | ADAPTER CABLE-TESTER,DIGITAL FLIGHT RECORDER SYSTEM | 1 | |
| A31007-1 | Adapter Cable - Tester, Digital Flight Recorder System | 2 | |
| A31007-30 | Adapter Cable - Tester, Digital Flight Recorder System | 3 | |
| A31007-39 | Adapter Cable - Tester, Digital Flight Recorder System | 1 | |
| A31007-49 | Adapter Cable - Tester, Digital Flight Recorder System | 6 | |
| A31007-59 | Adapter Cable - Tester, Digital Flight Recorder System | 17 | |
| A31007-59-REVH | CABLE - ADAPTER, TELEDYNE TESTER. USE WITH TELEDYNE DFDAU TESTER.^T1 | 1 | |
| A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32001-1 | WRENCH ADAPTER GLAND NUT MLG B767-200/300 | 1 | |
| A32004-1 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 12 | |
| A32004-4 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 1 | |
| A32004-5 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 2 | |
| A32020-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 13 | |
| A32020-8 | Hoist adapter-drag strut，NLG | 2 | |
| A32020-8. | ADAPTER - HOIST, NOSE LANDING GEAR DRAG STRUT | 2 | |
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| A32025-1 | WRENCH ADAPTER - WHEEL RETAINING AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32027-146 | ADAPTER ASSY FOR A32027-178 USE | 2 | |
| A32027-147 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
| A32027-150 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
| A32027-151 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
| A32027-155 | ADAPTER ASSY FOR PN:A32027-178 USE | 1 | |
| A32027-156 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
| A32027-168 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
| A32027-179 | ADAPTER ASSY FOR A32027-178 USE | 3 | |
| A32027-180 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
| A32027-181 | ADAPTER ASSY FOR A32027-178 USE | 3 | |
| A32027-182 | ADAPTER ASSY FOR A32027-178 USE | 3 | |
| A32027-36 | ADAPTER ASSY FOR PN:A32027-178 USE | 3 | |
| A32027-37 | ADAPTER ASSY FOR A32027-178 USE | 2 | |
| A32027-38 | ADAPTER ASSY FOR PN:A32027-178 USE | 2 | |
| A32027-46 | ADAPTER ASSY FOR A32027-178 USE | 2 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 8 | |
| A32041-1 | TORQUE ADAPTER - CYLINDER, NOSE LANDING GEAR (NLG) RETRACT ACTUATOR | 2 | |
| A32045-108 | SPL-5353 ADAPTER - WRENCH | 8 | |
| A32047-5 | Adapter assy-orifice-JBE | 1 | |
| A32047-6 | ADAPTER -0 RETAINER RING | 1 | |
| A32047-7 | ADAPTER -0 RETAINER RING | 1 | |
| A32069 | WRENCH ADAPTER-ANTISKID TRANSDUCER B767 | 1 | |
| A32069-1 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 1 | |
| A32069-7 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 20 | |
| A3207-9 | ADAPTER-SPIN UP | 1 | |
| A32070-1 | TORQUE ADAPTER - SNUBBER NUT | 1 | |
| A32075 | ADAPTER-ANTISKID TRANSDUCER SPIN-UP | 1 | |
| A32075-1 | Adapter - Antiskid Transducer, Spin-up | 14 | |
| A32075-1-9-10 | ADAPTER - ANTI SKID TRANSDUCER SPIN - UP | 1 | |
| A32075-10 | Adapter - Antiskid Transducer, Spin-up | 22 | |
| A32075-12 | ADAPTER - ANTI-SKID | 5 | |
| A32075-9 | Adapter - Antiskid Transducer, Spin-up | 3 | |
| A32078-1 | ADAPTER SET - RETAINING NUT, ACTUATOR SIDE AND DRAG BRACE, MAIN LANDING GEAR (MLG) | 1 | |
| A32101 | WRENCH ADAPTER-AXLE NUT,NLG | 1 | |
| A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
| A32101-2 | WRENCH ADAPTER NUT-NLG- | 7 | |
| A32120-1 | TORQUE ADAPTER SET - ACTUATOR COMPONENTS, MAIN LANDING GEAR (MLG) | 1 | |
| A33003-28 | CABLE - ADAPTER | 3 | |
| A33003-29 | CABLE - ADAPTER | 2 | |
| A33003-30 | CABLE - ADAPTER | 2 | |
| A33003-376 | CABLE - ADAPTER | 1 | |
| A33003-65 | CABLE - ADAPTER | 1 | |
| A34011-119 | CABLE ADAPTER - ASCTU (FOR 767 AIRPLANES WITH ASCTU) | 1 | |
| A34011-165 | CABLE ADAPTER - ASCTU (FOR 767 AIRPLANES WITH ASCTU) | 1 | |
| A34016-138 | Adapter - Black | 1 | |
| A34016-139 | Adapter - Black | 1 | |
| A34016-140 | Adapter - Black | 1 | |
| A34016-141 | Adapter - Black | 1 | |
| A34016-141+A3455 | Adapter - Red | 1 | |
| A34017-1 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 5 | |
| A34017-24 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 10 | |
| A34017-35 | Test adapter kit-pitot static continuity leak and flushing | 2 | |
| A34017-36 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 4 | |
| A34018-1 | Test adapter kit-pitot static alt continuity leak and flushing | 1 | |
| A34018-2 | Test adapter kit-pitot static alt continuity leak and flushing | 1 | |
| A342 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 1 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 7 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A36021-1 | ADAPTER CABLE - BITE MODULE, AIR SUPPLY SYSTEM | 2 | |
| A3T-28-001 | ADAPTER PSDA300-F | 1 | |
| A49002-2 | HOIST ADAPTER-LIFTING EYE_0.14KG/25X25X50MM_[A49002-2] | 17 | |
| A51300 | TOOL-PUMP END ADAPTER TO INFLATE/DEFLATE VALVE | 1 | |
| A71006-80 | FWD-ADAPTER | 1 | |
| A71011-331 | WRENCH-TORQUE ADAPTER HEAD | 8 | |
| A71013 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| A71013 REV F | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| A71013-19 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 6 | |
| A71013-32 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
| A71013-40 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
| A71013-45 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
| A71013-55 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
| A71013-82 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 8 | |
| A71013-88 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| A71049-1 | SENSOR EQPT- PT2 PROBE ADAPTER | 13 | |
| A78026 | ADAPTER - SQUARE DRIVE | 1 | |
| A78026-1 | ADAPTER - SQUARE DRIVE | 1 | |
| AB-B999-30SE-1 | FUEL FILTER ADAPTER FIXTURE (BOWL) COM-2589 | 2 | |
| AB27001-VU2 | ADAPTER-TORQUE-TRUNNION NUT | 1 | |
| AB28001-SU7 | ADAPTER - FUEL RETURN VALVE | 1 | |
| AB32001-SU3 | ADAPTER-WRENCH | 1 | |
| AB34001-D3X | ADAPTERS - AIR DATA SYSTEM FLUSHING | 1 | |
| AB35001-T5U | HOSE - ADAPTER, ALTITUDE SWITCH | 1 | |
| AB38001-T5J | ADAPTER - ALTITUDE PRESSURE SWITCH | 1 | |
| AB49002-HD1 | ADAPTER-VENT AND DRAIN VALVE APU | 1 | |
| AB73001-M9M | ADAPTER-LOCK CORE ENGINE | 1 | |
| AB73001-N8K | ADAPTER WRENCH - FASTENER | 1 | |
| AB73001-T5B | ADAPTER - LEAK TEST | 1 | |
| ABB999-30SE-1 | FUEL FILTER ADAPTER FIXTURE (BOWL) COM-2589 | 2 | |
| AC-CAR-CHARGER | AC-CAR-CHARGER;Car Adapter for OneExpert DSL | 1 | |
| AC-CHARGER | AC-CHARGER;AC Universal Power Adapter | 1 | |
| AC10K-HEADSETADPTR | AC10K-HEADSETADPTR;Headset Adapter | 1 | |
| AC10K-PWRADPTR | AC10K-PWRADPTR;AVX-10K AC/DC Power Adapter | 1 | |
| ACK-2 | GREASE GUN ADAPTER SET (PN : MACNAUGHT ACK-2) | 17 | |
| ACN16-FM4F6-R | OLYMPUS CABLE/ADAPTER - 16 PIN LEMO TO 4 PIN FISCHER RECEPTACLE, REFLECTION, 6.0' FEET LONG, NORTEC 500- 2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| ACP2D-N16-6-R | ADAPTER- 12-PIN LEMO TO LEMO 16 PIN, 6" REFL | 1 | |
| ACS28001 | ADAPTER, STRAIGHT, NON-LOCK, CONNECTOR | 4 | |
| AD-014075 | AD-014075;Adapter Cord NAmerica 110V 6 | 1 | |
| AD-014076 | AD-014076;Adapter Cord Europe | 1 | |
| AD-014077 | AD-014077;Adapter Cord Australia | 1 | |
| AD-014078 | AD-014078;Adapter Cord UK IEC C7 Connector No Fuse | 1 | |
| AD-10830 | AD-10830;ADAPTER 440A MINI WECO TO BNC | 1 | |
| AD-10831 | AD-10831;WECO 358 TO BNC ADAPTER CABLE | 1 | |
| AD-21160005 | AD-21160005;Conn Coax SMA Single Adapter SMA Male to BNC Female - Pi Gold Pass-Thru | 1 | |
| AD-22037471 | AD-22037471;Adapter Cord Type M for South Africa | 1 | |
| AD-22037483 | AD-22037483;Adapter Cord Argentina | 1 | |
| AD-22037484 | AD-22037484;Adapter Cord Australia/New Zealand | 1 | |
| AD-22037485 | AD-22037485;Adapter Cord Brazil | 1 | |
| AD-22037487 | AD-22037487;Adapter Cord Europe | 1 | |
| AD-22037488 | AD-22037488;Adapter Cord Denmark | 1 | |
| AD-22037489 | AD-22037489;Adapter Cord Israel | 1 | |
| AD-22037490 | AD-22037490;Adapter Cord Italy | 1 | |
| AD-22037491 | AD-22037491;Adapter Cord Japan | 1 | |
| AD-22037492 | AD-22037492;Adapter Cord Switzerland | 1 | |
| AD-22037493 | AD-22037493;Adapter Cord NAmerica | 1 | |
| AD-22037494 | AD-22037494;Adapter Cord Type M for India | 1 | |
| AD-C13C14 | AD-C13C14;Adapter Cord 10A max C13 to C14 | 1 | |
| AD-SC-SC-OM4-SXF-FS | COM-15047 ADAPTER - SNAP ON CONNECTOR, SC | 1 | |
| AD-SC-SC-SMM-SX-FS | ADAPTER - FIBER OPTIC, SC | 1 | |
| AD-SCU-SCU-SMP-DX-FS | ADAPTER - FIBER OPTIC, SC | 1 | |
| AD600-12 | Pitot Static Adapter Kit for Bombardier CL-600 | 1 | |
| AD953-7 | SET - PITOT-STATIC PROBE ADAPTER | 15 | |
| AD953HT-7 | SET - PITOT-STATIC PROBE ADAPTER | 1 | |
| AD967-47M | Pitot Static Accessory Adapter Kit for Boeing 747-400 | 3 | |
| ADA A120-612 | Static-dynamic Pressure Test Adapters | 1 | |
| ADA120-612 | STATIC-DYNAMIC PRESSURE ADAPTERS | 2 | |
| ADA130J-723 | ADAPTER KIT, PITOT-STATIC | 1 | |
| ADA60A-612 | PITOT-STATIC HEAD ADAPTERS | 1 | |
| ADA737-678 | ADAPTER KIT/737-600/700/800 | 14 | |
| ADA757-612 | PITOT-STATIC ADAPTERS | 8 | |
| ADA767HT-612 | ACCESSORY KIT - AIR DATA, 767 (PITOT/STATIC ADAPTERS, HOSES, ETC.) | 5 | |
| ADA787-612 | ADAPTER - STATIC TEST | 4 | |
| ADAG24-945 | Gulfstream Pitot Static Adapter Kit - Gulfstream 2/3/4/400/450 | 2 | |
| ADAP-OSFPQSFP28 | ADAP-OSFPQSFP28;OSFP to QSFP28 Adapter | 1 | |
| ADAP-QSFPSFP28 | ADAP-QSFPSFP28;QSFP to SFP28 Adapter | 1 | |
| ADAPTER | ADAPTER, 0.5 INCH UNF(BT)TC/75-113-00-01 | 1 | |
| ADAPTER 1 1/6 X 3/4 | ADAPTER 1 1/16” UNF-MALE X 3/4 | 1 | |
| ADK941588W | CHRYSLER ADAPTER 3-TAB | 1 | |
| ADK941589W | FORD ADAPTER 2-TAB | 1 | |
| ADK941590W | GM ADAPTER 3-TAB | 1 | |
| ADK941591W | FORD ADAPTER 3-TAB | 1 | |
| ADPT-800 | ADAPTER FOR BC-815 501-1873-01, | 1 | |
| AE89903E | HYDRAULIC QUICK DISCONNECT ADAPTER - FILL QD | 4 | |
| AE89903H | HYDRAULIC QUICK DISCONNECT ADAPTER - RETURN QD | 3 | |
| AED70US24 | POWER SUPPLY ADAPTERS AC/DC,OUTPUT 24V/3.0A INPUT 100-240V/1.5A | 2 | |
| AGE -00599-401 | ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
| AGE 50367 402 | ADAPTER RIGHT-HAND, ASSY | 1 | |
| AGE---00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGE-00017-401 | MAIN GEAR JACK ADAPTER (GSE 002) EMB-120 | 1 | |
| AGE-00065-401 | ADAPTER- HOISTING, MAIN LANDING GEAR | 1 | |
| AGE-00065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 6 | |
| AGE-0048-3001 | ADAPTER-WHEEL SPEED | 10 | |
| AGE-00483-001 | ADAPTER - WHEEL SPEED TRANSDUCER | 10 | |
| AGE-00483-401 | ADAPTER - WHEEL SPEED TRANSDUCER | 1 | |
| AGE-00545-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 1 | |
| AGE-00568-001 | ADAPTER - FLAP FLEXIBLE SHAFT | 1 | |
| AGE-00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
| AGE-00599-401 | ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
| AGE-00602-001 | ADAPTER - TORQUE, WING/FUSELAGE BOLT | 3 | |
| AGE-0065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 1 | |
| AGE-01421-401 | KIT - JACKING ADAPTER | 1 | |
| AGE-01421-4011 | KIT - JACKING ADAPTER | 1 | |
| AGE-01468-401 | KIT-JACK ADAPTER | 2 | |
| AGE-01480-001 | ADAPTER - WHEEL SPEED TRANSDUCER | 1 | |
| AGE-01524-401 | ADAPTER, CABIN PRES-SURIZATION TEST | 2 | |
| AGE-01588-401 | ADAPTER, WHEEL CHANGE-NLG | 1 | |
| AGE-01605-401 | ADAPTER - CABIN PRES-SURIZATION TEST | 1 | |
| AGE-01834-401 | ADAPTER, APU TRANS-PORT | 8 | |
| AGE-01837-403 | ADAPTER - LIFTING, ENGINE ASSEMBLY | 7 | |
| AGE-02430-401 | ADAPTERS SET, LEAK TEST-FUEL LINE/TANK | 1 | |
| AGE-02933-401 | ADAPTERS SET - LEAKAGE TEST, FIREX SYS | 1 | |
| AGE-03003-401 | ADAPTER-PRESSURIZATION TEST | 1 | |
| AGE-03025-401 | SET- ADAPTERS, RIGGING FLAP | 1 | |
| AGE-03132-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 1 | |
| AGE-03248-401 | SET-ADAPTERS, RIGGING FLAP | 4 | |
| AGE-03249-403 | SET-ADAPTERS LEFT HAND, RIGGING FLAP | 3 | |
| AGE-03249-404 | SET-ADAPTERS RIGHT HAND, RIGGING FLAP | 2 | |
| AGE-03328-401 | GSE 150 ADAPTER - LIFTING ENG AIR INTAKE | 2 | |
| AGE-03390-401 | ADAPTERS SET - LEAKAGE TEST, FIREX SYS | 3 | |
| AGE-03889-401 | ADAPTERS SET, LEAKAGE TEST-BLEED/AIR CONDITIONING | 1 | |
| AGE-04091-401 | ADAPTER - STATIC LINE | 4 | |
| AGE-04134-401 | ADAPTERS-STAND | 9 | |
| AGE-04251-401 | ADAPTER BOX P/N AGE-04251-401 | 2 | |
| AGE-04363-401 | KIT - JACKING ADAPTER | 9 | |
| AGE-04369-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 3 | |
| AGE-04369-401 | ADAPTERS - TEST, PNEUMATIC SYSTEM | 3 | |
| AGE-04443-401 | ADAPTERS SET-TEST, TORQUE MOTOR SERVO LINES | 1 | |
| AGE-04511-401 | ADAPTER ASSEMBLY - PHENOM 100 NOSE | 2 | |
| AGE-04540-401 | ADAPTER - FUEL LEAK-AGE TEST, WING | 1 | |
| AGE-04540-403 | ADAPTER - FUEL LEAK-AGE TEST, WING | 1 | |
| AGE-04713-401 | ADAPTER - PRESSURI-ZATION TEST, CABIN | 4 | |
| AGE-04713-401 / GSE-017 | CABIN PRESSURE TEST ADAPTER - EMBRAER | 1 | |
| AGE-04718-401 | ADAPTER SET-MEAS, TAP BACKLASH | 4 | |
| AGE-0483-001 | ADAPTER-WHEEL SPEED TRANSDUCER | 1 | |
| AGE-04890-401 | Adapters - Set Jacking Aircraft | 2 | |
| AGE-05102-401 | SET - ADAPTERS/HARNESS, ADC CALI-BRATION | 1 | |
| AGE-05102-403 | SET - ADAPTERS/HARNESS, ADC CALI-BRATION | 3 | |
| AGE-05190-401 | SET - TEST ADAPTERS | 1 | |
| AGE-05190-403 | SET - TEST ADAPTERS | 1 | |
| AGE-05315-401 | Adapters - Meas Horizontal Tail Backlash | 1 | |
| AGE-05315-401-REVB | ADAPTERS - MEAS HORIZ TAIL BACKLASH | 1 | |
| AGE-05367-401 | ADAPTER LEFT-HAND, ASSY | 10 | |
| AGE-05367-402 | ADAPTER RIGHT-HAND, ASSY | 10 | |
| AGE-05439-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS | 1 | |
| AGE-05499-401 | ADAPTER, WHEEL CHANGE-MLG | 1 | |
| AGE00065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 6 | |
| AGE01421-401 | KIT - JACKING ADAPTER | 1 | |
| AGE03390-401 | ADAPTERS SET - LEAKAGE TEST,FIREX SYS EMB195 | 3 | |
| AGE04363-401 | KIT - JACKING ADAPTER | 9 | |
| AGE05367-401 | ADAPTER LEFT-HAND, ASSY | 10 | |
| AGE05367-402 | ADAPTER RIGHT-HAND, ASSY | 10 | |
| AGE05367-402 | ADAPTER RIGHT-HAND, ASSY | 10 | |
| AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
| AGE15011 | ADAPTER - ACM TORQUE CHECK | 5 | |
| AGE70018 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER (25 FT CABLE RS485 TO RS232) | 5 | |
| AGE70069 | ADAPTER, APU TRANS-PORT | 5 | |
| AGE70216 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER (25 FT CABLE RS485 TO RS232) | 9 | |
| AGR-01480-001 | ADAPTER-WHEEL SPEED TRANSDUCER | 1 | |
| AHCCPS97F | HI-FLOW SWIVEL ADAPTER FEMALE | 1 | |
| AHCCPS97M | HI-FLOW SWIVEL ADAPTER MALE | 1 | |
| AI1/4NPT-F4MS | ADAPTER FF 1/4 NPT - 7/16 MS | 1 | |
| AI1/4NPT-F5MS | ADAPTER FF 1/4 NPT - 1/2 MS | 1 | |
| AIBMD | ADAPTER-TEST, SARD SYSTEM | 1 | |
| AIBMD/J27072-1 | ADAPTER TEST-SARD SYSTEM | 1 | |
| AK1-380PAX | SET-ADAPTER,SUPPLEMENTAL COOLING SYSTEM | 1 | |
| AK737 | KIT-ADAPTER, PITOT / STATIC (B737-CLASSIC) | 3 | |
| AK737-900 | ADAPTER - STATIC TEST (COM-1921) | 2 | |
| AK747HT | ACCESSORY KIT - AIR DATA (PITOT/STATIC ADAPTERS, HOSES, ETC.) | 2 | |
| AK787 | ADAPTER - STATIC TEST | 2 | |
| AKMD10 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-10 | 1 | |
| AKMD11 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-11 | 1 | |
| AL1-MBNC | ADAPTER - LEMO L1 MALE TO MALE BNC Includes Certificate of Conformance | 1 | |
| ALT45200001 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 1 | |
| AM-1928-100 | BOOSTRAP ADAPTER FOR CF6-80 | 1 | |
| AM-1928-900 | ADAPTER, BOOTSTRAP, CF6-80C2 | 1 | |
| AM-2371-1000 | CRADLE,ADAPTER - CRADLE | 3 | |
| AM-2811-603 | ENGINE STAND - ADAPTERS | 1 | |
| AM-2811-608 | ENGINE STAND - ADAPTERS | 1 | |
| AN4 TEE ADAPTER | AN4 MALE FLARE TEE SHAPE - ADAPTER 3-WAYS FITTING | 1 | |
| AN4 UNION ADAPTER | AN4 MALE FLARE STRAIGHT UNION - ADAPTER 2-WAYS FIT | 1 | |
| AN807-4D | O2 ADAPTER -3 OFF TOOL | 3 | |
| AND10089-3PC-1006 | ADAPTER - ADAPTER FOR FILLING WITH OXYGEN STATIONARY | 1 | |
| AP-BEE530-3 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
| AP01618 | ADAPTER, IN-LINE MATING - SMA TO SMA | 1 | |
| AP208 | ADAPTER, UNDERWING - FUEL TANK VENT | 1 | |
| AP2D-BR-B | ADAPTER - 12 PIN MALE LEMO TO FEMALE BURNDY. DIFERENTIAL / BRIDGE. Includes Certificate of Confromance. | 1 | |
| APA17887-4-6 | SYSTEM PURGE ADAPTER APA17887-4-6 | 1 | |
| APA97632M1-3-4-4 | ADAPTER-PITOT TEST | 3 | |
| APA97632M1-4-4-4 | SMARTPROBE PRESSURE ADAPTER PART NUMBER:APA97632M1-4-4-4 | 1 | |
| APCENG-301004-2 | ADAPTER -COMPRESSOR HOSE TO ABAS KIT | 1 | |
| APHN-6-6F | ADAPTER - FEMALE QUICK DISCONNECT | 1 | |
| APV7873-01-0 | ADAPTER - TORQUE TOOL | 2 | |
| ARINC 429 | RAR-USB-0805W-ECCBL-CASE - ADAPTER | 2 | |
| AS33514E1 | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS33514E10 | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS33514E10 TYPE | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS33514EIO TYPE | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS5174D0504V | ADAPTER 5/16" JIC-MALE X 1/4" JIC-MALE | 1 | |
| AS5180D04 | O2 ADAPTER -3 OFF TOOL | 3 | |
| AS5195D0404 | ADAPTER-ELBOW, 90°,NPT-JIC 37 (HAWKER) | 1 | |
| AST-2877 | ADAPTER-TORQUE WRENCH | 8 | |
| AT100D/FF | OPTICAL ADAPTER AT 100D/FF-1F8C5 | 1 | |
| AT100D/NF | OPTICAL ADAPTER AT 100D/NF-1F8C5 | 1 | |
| AT100S/FF | OPTICAL ADAPTER AT 100S/FF-1F8C5 | 1 | |
| AT100S/FF-IV94N | AT100S/FF-IV94N IPLEX NX TIP ADAPTER | 1 | |
| AT100S/NF | OPTICAL ADAPTER AT 100S/NF-1F8C5 | 1 | |
| AT100S/NF-IV94N | AT100S/NF-IV94N IPLEX NX TIP ADAPTER | 2 | |
| AT120D/FF-IV84 | Direct Viewing , 120 degree field of view Tip Adapter.Depth of field 25-Infiniy mm | 2 | |
| AT120D/FF-IV86 | ADAPTER, OPTICAL TIP, OLYMPUS, AT120D/FFIV86, 120 DEG VIEW, 6 MM TIP,4-190 MM FIELD, FOR IPLEX IV86 VIDEOSCOPE, GREEN | 2 | |
| AT120D/FF-IV94N | AT120D/FF-IV94N IPLEX NX TIP ADAPTER | 1 | |
| AT120D/FF-IV96G | IV96G-AT120D/FF IPLEX G SERIES OPTICAL TIP ADAPTER | 1 | |
| AT120D/FF-IV96N | AT120D/FF-IV96N IPLEX NX TIP ADAPTER | 1 | |
| AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | 1 | |
| AT120D/NF-IV96G | IV96G-AT120D/NF IPLEX G SERIES OPTICAL TIP ADAPTER | 1 | |
| AT120D/NF-IV96N | AT120D/NF-IV96N IPLEX NX TIP ADAPTER | 1 | |
| AT120S/FF-IV84 | Side Viewing , 120 degree field of view Tip Adapter Depth of field 6 - Infiniy mm | 2 | |
| AT120S/FF-IV96G | OPTICAL ADAPTER FOR SPECIFIC VISION OF 6.0 MM. MODEL: AT120S/FF-IV96G | 1 | |
| AT120S/FF-IV96N | AT120S/FF-IV96N IPLEX NX TIP ADAPTER | 1 | |
| AT120S/NF-IV84 | Side Viewing , 120 degree field of view Tip Adapter, Depth of field 1 - 20 mm | 2 | |
| AT120S/NF-IV96N | AT120S/NF-IV96N IPLEX NX TIP ADAPTER | 1 | |
| AT31799 | WHEEL-SENSOR TORQUE-WRENCH ADAPTER | 6 | |
| AT31799-IAS | ADAPTER-TORQUE WRENCH | 1 | |
| AT406CVAC-3 | VACUUM ADAPTER-CENTRAL VAC | 1 | |
| AT50D/50D-IV84 | Stereo Tip Adapter Depth of field 5 mm - Infinity mm | 2 | |
| AT50S/50S-IV84 | Stereo Tip Adapter Depth of field 4mm - Infinity mm | 1 | |
| AT520CTT-3RH | ADAPTER-3/32 | 1 | |
| AT5661 | PORT ADAPTER WHITAKER CMM 21-58-02 | 1 | |
| AT57495 | TORQUE WRENCH ADAPTER - NLG SHOCK STRUT GLAND NUT | 4 | |
| AT60D/60D-IV96G | IV96G-AT60D/60D IPLEX G SERIES OPTICAL STEREO MEASUREMENT TIP ADAPTER MAJ-2343 | 1 | |
| AT60S/60S-IV96G | IV96G-AT60S/60S IPLEX G SERIES OPTICAL STEREO MEASUREMENT TIP ADAPTER MAJ-2344 | 1 | |
| AT69-35663-1001 | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
| AT69-35663-1001PM | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
| AT80D/FF-IV94N | OPTICAL TIP ADAPTER AT80D/FF-IV94N IPLEX NX (OLYMPUS CODE:N4148700) | 1 | |
| ATI134GA | GOOSENECK-TYPE ADAPTER AND EXTENSION | 2 | |
| ATI503A-4 | DRILL ADAPTER THREADED #10-32 | 1 | |
| ATI520CTT30L | ADAPTER - 3/ | 1 | |
| ATI520CTT3RH | ADAPTER - 3/ | 1 | |
| AW-2MIT2A264-0812 | ADAPTER PLATE-PORTABLE WATER TANK | 1 | |
| AW-H47682 | ADAPTER-MLG | 1 | |
| AW-J47549 | ADAPTER-NLG | 1 | |
| AZ421 | KODAK PIXPRO DIGITAL CAMERA, Li-Ion Battery 4 GB SD CARD / inside of Camera, USB Battery Charger Data Sync Cable Cord, AC Adapter Power Plug | 1 | |
| A−C148659−1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| B-75 | ADAPTER - DRAIN, STARTER | 3 | |
| B07001 | ADAPTER -0 JACKING, FORWARD BODY | 1 | |
| B07001-7 | ADAPTER - JACKING, FORWARD BODY | 15 | |
| B07001-7-M | ADAPTER -0 JACKING, FWD BODY | 1 | |
| B07002 | ADAPTER -0 AIRPLANE STABILIZATION | 1 | |
| B07002-1 | JACKING ADAPTER - AIRPLANE STABILIZATION | 13 | |
| B12006 | ADAPTER -0 LUBRICATION, SPOILER OUTER HINGE LINK | 1 | |
| B12006-1 | ADAPTER - LUBRICATION, SPOILER OUTER HINGE LINK ASSEMBLY | 15 | |
| B19285-1 | "TOOL - CHARGING ADAPTER TO CHARGING VALVE (WITH O-RING WHICH CONFORMS TO | 1 | |
| B19586-3 | ADAPTER -TORQUE WRENCH B19586-3 | 1 | |
| B200004-42 | B20004-42 ADAPTER - ACCESS PANEL, LEVERAGE (SC | 1 | |
| B20002-1 | TORQUE ADAPTER - SOCKET TYPE | 1 | |
| B20004 | LEVERAGE ADAPTER EQUIPMENT - ACCESS PANEL | 1 | |
| B20004-21 | Leverage Adapter Equipment - Access Panel | 15 | |
| B20004-42 | Leverage Adapter Equipment - Access Panel | 12 | |
| B20004–42 | LEVERAGE ADAPTER EQPT- | 12 | |
| B21117 | , SCREW (MS24694-S102 OR AN509-416R15 (4 REQD.), BOLT (MS21296-04007, (4 REQD.), BOLT (NAS7703-9 (4 REQD.)), BOLT, (MS21296-04007 (4 REQD.)), BOLT, (AN4-7A (2 REQD.)), SCREW (AN509-416R15 (2 REQD, 2 DRILL MOTORS (1,100 TO 2,000 RPM), SPIN ADAPTER (2571004 | 1 | |
| B25002 | FUNCTIONAL TEST EQUIPMENT -0 ADAPTER, OFF WING | 1 | |
| B25002-37 | FUNCTIONAL TEST EQUIPMENT - ADAPTER, OFF WING ESCAPE SLIDE | 4 | |
| B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27033 | TORQUE ADAPTER -0 AILERON PCU INSTL | 1 | |
| B27033-1 | TORQUE ADAPTER - AILERON POWER CONTROL UNIT INSTALLATION | 8 | |
| B27072 | ADAPTER KIT - OUTBD/AFT FLAP SLING | 1 | |
| B27072 REV NC | ADAPTER KIT - OUTBD/AFT FLAP SLING | 1 | |
| B27072-1 | ADAPTER KIT - OUTBOARD/AFT, FLAP SLING | 3 | |
| B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | 1 | |
| B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 7 | |
| B27075-20-M | HOIST ADAPTER-REM/INST | 1 | |
| B27080-1 | ADAPTER -0 LUBE STABILIZER | 1 | |
| B27080-2 | ADAPTER -0 LUBE STABILIZER | 1 | |
| B2800-11 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 8 | |
| B2800-13 | Adapter-Sump DrainValve, Removal/Installation | 1 | |
| B28001 | ADAPTER-SUMP DRAIN VALVE,REM/INSTL | 1 | |
| B28001-1 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 8 | |
| B28001-11 | Adapter - Sump Drain Valve, Removal/Installation | 10 | |
| B28001-13 | Adapter - Sump Drain Valve, Removal/Installation | 15 | |
| B28001-18 | Adapter - Sump Drain Valve, Removal/Installation | 17 | |
| B28001-2 | ADAPTER - SUMP DRAIN | 12 | |
| B28001-5 | ADAPTER - SUMP DRAIN | 6 | |
| B28001-8 | ADAPTER-SUMP DRAIN VALVE | 2 | |
| B28002-1 | HOSE ADAPTER - SUMP FUEL DRAIN | 20 | |
| B28007 | PRESSURE TEST ADAPTERS -0 ENGINE FUEL FEED | 1 | |
| B28007-1 | PRESSURE TEST ADAPTERS - ENGINE FUEL FEED | 4 | |
| B28007-2 | PRESSURE TEST ADAPTERS - ENGINE FUEL FEED | 5 | |
| B29001-23 | ADAPTER SCREEN - RAM AIR TURBINE - 757/767 (GDC10134) | 14 | |
| B29001-46 | ADAPTER SCREEN - RAM AIR TURBINE - 757/767 (GDC10135) | 11 | |
| B31001 | CABLE -0 ADAPTER, BUS ANALYZER, ARINC 429 | 1 | |
| B31001-1 | CABLE - ADAPTER, BUS ANALYZER, ARINC 429 | 2 | |
| B32004 | HOIST ADAPTER -0 DRAG STRUT, NLG | 1 | |
| B32004-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR (NLG) | 9 | |
| B32008 | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | 1 | |
| B32008 REV B | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | 1 | |
| B32008-1 | HOIST ADAPTER - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 6 | |
| B32015 | HOISTING ADAPTER SET -0 MLG COMPONENTS | 1 | |
| B32015-38 | HOISTING ADAPTER SET - MAIN LANDING GEAR COMPONENTS | 8 | |
| B32036 | ADAPTER -0 ACTUATOR, LANDING GEAR TRUCK | 1 | |
| B32036-1 | ADAPTER - ACTUATOR, LANDING GEAR TRUCK POSITIONER | 3 | |
| B32054 | ADAPTER -0 UPLOCK, MAIN LANDING GEAR | 1 | |
| B32054-1 | ADAPTER - UPLOCK, MAIN LANDING GEAR (MLG) | 6 | |
| B32057-35 | Adapter - Aircraft Jacking Point | 1 | |
| B32067 | WRENCH ADAPTER -0 NOSE WHEEL STEERING TILLER | 1 | |
| B32067-1 | WRENCH ADAPTER - NOSE WHEEL STEERING TILLER HANDLE | 4 | |
| B32071-1 | HOIST ADAPTER EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 4 | |
| B362-008407 | TORQUE - ADAPTER | 1 | |
| B362-04180A | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-0911 | ULB BATTERY, TORQUE ADAPTER (TELEDYNE BENTHOS, ELP-362D BEACONS) | 1 | |
| B362-09111 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 5 | |
| B411 | Adapter - Rubber Tipped | 1 | |
| B52008 | ADAPTER -0 CLOCKING NO.1 & NO.2 CARGO DOOR | 1 | |
| B52008-1 | ADAPTER - CLOCKING, NUMBER 1 AND 2 CARGO DOOR ROTARY ACTUATOR | 6 | |
| B54019 | ADAPTER EQPT -0 STRUT UNLOAD, FWD ENGINE MOUNT | 1 | |
| B54019-23 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 6 | |
| B54019-24 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 6 | |
| B54019-40 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 5 | |
| B54019-41 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 5 | |
| B57003 | ADAPTER EQPT -0 TRUNNION BEARINGS AND MOUNT, MLG | 1 | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| B71004-10 | ADAPTER - LOAD TEST | 1 | |
| B71005-2 | 8 IN. EXTENSION- ADAPTER | 9 | |
| B71005-3 | 11.5 IN EXTENSION- ADAPTER | 3 | |
| B71024-37 | INCH DRIVE LONG SOCKET ADAPTER FOR P/N B71024-36 | 1 | |
| B71024-39 | STRAIGHT EXTENSION ADAPTER FOR P/N B71024-36 | 3 | |
| B71044 | ADAPTER EQUIPMENT-LOAD TEST,PRESSURE RELIEF DOOR LATCH | 1 | |
| B71044-1 | ADAPTER - LOAD TEST | 1 | |
| B71044-10 | Adapter Equipment - Load Test, Pressure Relief Door Latch | 7 | |
| B71044-28 | Adapter Equipment - Load Test, Pressure Relief Door Latch | 13 | |
| B71044-37 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 3 | |
| B737-72-00-00 | ADAPTER ENGINE PRESERVATION CFM56-3 | 1 | |
| B75-48 | ADAPTER -STARTER FILL | 1 | |
| B76004-1 | ADAPTER - THRUST CONTROL INNER SHAFT 76-10-03 | 1 | |
| B761P5003101 | BREAK-OUT-BOX, 9-PIN ADAPTER | 1 | |
| B78008-21 | ADAPTER ASSEMBLY - (B78008-21 IS | 5 | |
| B78016-9 | ADAPTER - WORM GEAR SHAFT (B78016-9 IS INCLUDED IN B78016-1) | 4 | |
| B809-3005 | ADAPTER - OXYGEN CHARGING | 1 | |
| B952 | FUEL QUANTITY ADAPTER SET 6150-00-408-3005 | 1 | |
| BA-744-100 | CHERRY® PULLING HEAD ADAPTERS (FOR SCREWS: G87D) (ALLOWS 1:: H84A-8, H83B-5MB, H83B-6MB) (ADD TO CART: ADD TO CART) (FOR SCREWS: G87D) (ALLOWS 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828) (ADD TO CART: ADD TO CART) (FOR SCREWS: G686B-S, G689, G | 1 | |
| BAB DRG 1827 | ADAPTER - OUTLET | 1 | |
| BABDRG1827 | ADAPTER-OUTLET | 1 | |
| BAT-195-1 | Rivet Set Shank Adapter - Shank Opening: .498 Rivet Set to be Used: .401 | 1 | |
| BAT-195-2 | Rivet Set Shank Adapter - Shank Opening: .401 Rivet Set to be Used: .498 | 1 | |
| BAWA-6 | EMB 170-175 MLG AXLE NUT ADAPTER 3" - 6 POINT. DRIVE 3/4" | 1 | |
| BEI3840 | MAIN WHEEL ADAPTER ASSY (P/N 3-1573-1) | 1 | |
| BEI3840-103-P1 | ADAPTER FOR WHEEL ASSY 3-1546 | 1 | |
| BEI3840-115-P1 | ADAPTER FOR WHEEL ASSY 3-1596 | 1 | |
| BEI3840-121-P2 | MAIN WHEEL ADAPTER ASSY(FOR 2612311-1) | 1 | |
| BEI3840-125-P1 | NOSE WHEEL ADAPTER ASSY(FOR 2607825-2) | 1 | |
| BEI3840-234-P1 | BAUER WHEEL ADAPTER P/N 3-1268-4 (BRAND NAMEEQUAL) MODEL BEI3840-234-P1 | 1 | |
| BEI3840-243-P1 | BAUER WHEEL ADAPTER P/N 3-1634 (BRAND NAMEEQUAL) MODEL BEI3840-243-P1 | 1 | |
| BENCH VISE | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| BGA 21 | ADAPTER- SUB. ASSY OF 98A54403022001 | 1 | |
| BH27956 | TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 1 | |
| BL51555 | WRENCH-TORQUE ADAPTER | 1 | |
| BMH-NR 1014831 | ADAPTER - CYCLEAN ENGINE WASH | 1 | |
| BMH-NR 1035837 | ADAPTER-CYCLEAN ENGINE WASH ( COM-14882 ) | 1 | |
| BNC-Z/50-500K | BNC to Miz-20 & 22 adapter, 50-500KHz | 1 | |
| BNC-Z21/50-500K | Miz 21 to female BNC adapter, 50-500KHz | 1 | |
| BRN-029G | 3-1/4IN DIA ADAPTERENT | 1 | |
| BRN-045G9 | 4-1/8IN DIA ADAPTER | 1 | |
| BST-2912-9 | ADAPTER RING-PROPELLER | 1 | |
| BT-BS-618BT | STRAP WRENCH ADAPTER - HANDLE-LESS | 2 | |
| BT-D-0622 | Adapter - 1/4" Female Socket to 3/8" Male Drive | 2 | |
| BT-S-550 | 24 Piece Adapter Jaw Set for BT-VS-500 | 2 | |
| C07002-1 | ADAPTER - JACK, FITT | 30 | |
| C07004-1 | JACK ADAPTER-AFT BODY | 25 | |
| C07007-1 | Adapter-Jack,ForwardBody | 14 | |
| C07007-11 | Adapter - Jack, Forward Body | 9 | |
| C07007-17 | ADAPTER, JACK - FWD BODY | 1 | |
| C07007-19 | Fwd body jack adapter C07007-1 | 20 | |
| C07007-2 | ADAPTER - JACK, FORWARD BODY | 2 | |
| C07007-23 | JACK ADAPTER - FORWARD BODY0 | 1 | |
| C0M10946 | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| C12003-1 | Adapter Nozzle - Ram Air Inlet Modulation Shaft | 5 | |
| C19848-1 | ADAPTER-FOR HYDROSTATIC TESTING | 1 | |
| C19848-3 | ADAPTER - FOR HYDROSTATIC | 1 | |
| C21004-1 | JACK ADAPTER- INSTL /REMOVAL, AIR CONDITIONING | 1 | |
| C21005 | HOIST ADAPTER-AIR CONDITIONING PACK | 1 | |
| C21005-1 | Hoist Adapter - Air Conditioning Pack | 4 | |
| C21005-1/70 | HOIST ADAPTER - AIR CONDITIONING PAC | 1 | |
| C21005-62 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 3 | |
| C21005-70 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 9 | |
| C21006-7 | ADAPTER - HOSE, EXHAUST | 10 | |
| C21011-1 | ADAPTER - HOSE, EXHAUST | 4 | |
| C24002 | JACK ADAPTER-VSCF & IDG | 2 | |
| C24002-31 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 1 | |
| C24002-39 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 5 | |
| C24002-40 | JACK ADAPTER -0 IDG | 5 | |
| C24002-41 | ADAPTER-LIFT IDG | 7 | |
| C24002-45 | JACK ADAPTER - IDG | 2 | |
| C24002-68 | Cradle adapter assembly - AC gen/CSD (cradle only ) | 2 | |
| C24002-77 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 14 | |
| C24002-78 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 17 | |
| C27007-32 | TEST CABLE ADAPTER - TRIM CONTROL TESTER | 5 | |
| C27017-1 | Adapter Set-Torque Wrench-TE Flaps | 3 | |
| C27020-1 | Torque Wrench Adapter - LE Slat | 3 | |
| C27024-1 | Adapter-Torque Wrench | 1 | |
| C27040 | HOIST ADAPTER-INSTL/REMOVAL.FLAP TRACK | 1 | |
| C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 5 | |
| C27040-1-M | HOIST ADAPTER-INST/REM | 1 | |
| C27040-29 | Hoist Adapter - Installation/Removal, Flap Track (CE) | 5 | |
| C27046-13 | ASSEMBLY - WRENCH ADAPTER | 26 | |
| C27048-1 | VISE ADAPTER EQPT- ACTUATOR, L.E. FLAP | 1 | |
| C27060 | ADAPTER EQUIPMENT - CONTROL WHEEL | 1 | |
| C27060-1 | Adapter Equipment - Control Wheel | 23 | |
| C27060-22 | ADAPTER EQUIPMENT - CONTROL WHEEL | 7 | |
| C27061-1 | Adapter - Wrench, Flight Spoiler Actuator Power Control Unit | 6 | |
| C27064 | Torque Wrench Adapter - Manual Stabilizer Trim Wheel | 1 | |
| C27064-1 | Torque Wrench Adapter - Manual Stabilizer Trim Wheel | 16 | |
| C27076-1 | ADAPTER - TORSION ROD INSTALLATION LE SLAT | 2 | |
| C27076-9 | Adapter -Torsion Rod Installation. Leading Edge Slat | 4 | |
| C28001-1 | Adapter -Sump Drain. Center Wing Tank | 6 | |
| C28003-1 | Adapter - Sump Pump | 6 | |
| C29005-1 | Adapter - Tee, Standby Hydraulic System Test | 6 | |
| C29006-1 | Adapter - Ground Service Connection, Hydraulic Power | 3 | |
| C29006-14 | Adapter - Flare Swivel | 1 | |
| C29006-27 | Adapter Equipment- Ground Service Connection, Hydraulic Power | 7 | |
| C29006-9 | Adapter - Flare Swivel | 1 | |
| C32012-19 | 1/2" -> 3/4" ADAPTER | 2 | 3/4\" ADAPTER','Pa2959','has been added to your tool request. Feel free to search for more tools before submitting your Tool Request. After you have added all of your tools, click on "Tool Request" in the main menu at the top of the page.','has already been added to your tool request. To update the quantity please go to the Tool Request page by clicking on "Tool Request" in the main menu at the top of the page. Otherwise, please feel free to search for more tools before continuing on to the Tool Request.');"> |
| C32013 | TORQUE WRENCH ADAPTER-AFT BRG RTNR NUT,MLG TRUN | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32020-15 | ADAPTER ASSY - NLG | 9 | |
| C32029 | ASSEMBLY - WRENCH ADAPTER | 1 | |
| C32029-3 | ASSEMBLY - WRENCH ADAPTER | 4 | |
| C32029-38 | ASSEMBLY - WRENCH ADAPTER | 6 | |
| C32029-4 | ASSEMBLY - WRENCH ADAPTER(INCLUDED IN C32029-45 KIT) | 3 | |
| C32029-45 | ASSEMBLY - WRENCH ADAPTER | 18 | |
| C32029-48 | Assembly - Wrench Adapter | 6 | |
| C32029-49 | Assembly - Wrench Adapter | 6 | |
| C32029-50 | ASSEMBLY - WRENCH ADAPTER | 5 | |
| C32029-52 | ASSEMBLY, WRENCH ADAPTER, C32029-55 (INCLUDED IN C32029 KIT) | 2 | |
| C32029-6 | ASSEMBLY - WRENCH ADAPTER | 6 | |
| C32029-7 | ASSEMBLY - WRENCH ADAPTER | 6 | |
| C32029-87 | ASSEMBLY - WRENCH ADAPTER | 6 | |
| C32030 -31 | ASSEMBLY - WRENCH ADAPTER | 9 | |
| C32031-3 | PUSH ADAPTER ASSEMBLY-R/I EQPTAFT | 3 | |
| C32031-5 | PULL ADAPTER ASSEMBLY - R/I EQPT | 4 | |
| C32039-1 | Adapter - Functional Test, Nose Landing Gear Steering Actuator | 9 | |
| C32048 | ADAPTER ASSY-UPLOCK,MAIN LANDING GEAR | 1 | |
| C32048-1 | Adapter Assembly - Uplock, Main Landing Gear | 15 | |
| C32048-2 | ADAPTER ASSEMBLY - UPLOCK, MAIN LANDING GEAR | 2 | |
| C32062-1 | ADAPTER EQUIPMENT - WRENCH, HOOK SPANNER | 4 | |
| C34001 | Adapter Assembly -Smiths (Lear-Siegler) Flight Management Computer (Fmc)/Control Display Unit (Cdu). Boeing Automatic Test Station (Ats). | 1 | |
| C34001-1 | ADAPTER - LEAR-SIEGLER FLIGHT MANAGEMENT | 1 | |
| C34006-53 | ADAPTER, TRAY - ELECTRONIC FLIGHT INSTRUMENTS SYSTEM (EFIS) SYMBOL GENERATOR SOFTWARE LOADING | 2 | |
| C34006-57 | ADAPTER, TRAY - ELECTRONIC FLIGHT INSTRUMENTS SYSTEM (EFIS) SYMBOL GENERATOR SOFTWARE LOADING | 7 | |
| C34011 | Adapter Equipment -Honeywell Mode Control Panel (Mcp) And Flight Control Computer (Fcc) To Boeing Automatic Test Station (Ats-182) | 1 | |
| C34011-1 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | 1 | |
| C34011-11 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | 1 | |
| C34011-21 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | 1 | |
| C36001-10 | ADAPTER FOR CFM56-3 | 3 | |
| C36001-11 | ADAPTER FOR CFM56-3 | 2 | |
| C36001-17 | ADAPTER FOR CFM56-7 | 6 | |
| C36001-18 | ADAPTER FOR CFM56-7 | 3 | |
| C36001-9 | ADAPTER FOR CFM56-3 | 3 | |
| C37099-103 | TOOL-ADAPTER,PRESSURE TEST VALVE | 4 | |
| C44001 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 1 | |
| C44001-1 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-48 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 5 | |
| C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 6 | |
| C44001-58 / C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 2 | |
| C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 3 | |
| C47943 | C47943 ADAPTER - FORWARD LANDING GEAR BARREL SCISSORS MIDDLE PIN NUT | 5 | |
| C49004-10 | Aft Adapter Assy - GTCP 85-129 APU | 7 | |
| C49004-11 | Fwd Adapter Assy - GTCP 36-280 APU | 4 | |
| C49004-12 | Aft Adapter Assy - GTCP 36-280 APU | 3 | |
| C49008-37 | Adapter Equipment - Auxiliary Power Unit Jacking | 11 | |
| C52007-1 | Torque Wrench Adapter Equipment - Automatic Overwing Exit Hatch | 12 | |
| C52007-8 | TORQUE WRENCH ADAPTER EQUIPMENT - AUTOMATIC | 2 | |
| C52008-1 | ADAPTER - TORQUE WRE | 20 | |
| C55001-7 | Adapter-Elevator Hinge Ftg | 1 | |
| C5ADVANCEDCLKCABLE | C5ADVANCEDCLKCABLE;Conn Coax SMA Advanced Timing Adapter SMA Female to DIN Female - Three Legs | 1 | |
| C5COAX-TNCF-TNCF | C5COAX-TNCF-TNCF;Metro TNCF to TNCF Coax Cable Adapter | 1 | |
| C5TEM2-ATT | C5TEM2-ATT;ATT package TEM2 w portable antenna and adapter N-Type to SMA | 1 | |
| C6X-S | #8 C6XS TRIPLE-LOK® 37° FLARE JIC TUBE FITTINGS AND ADAPTERS | 1 | |
| C71001 | WRENCH ADAPTER-AFT CONEBOLT NUT | 8 | |
| C71001-1 | WRENCH ADAPTER-AFT CONEBOLT NUT | 10 | |
| C71014-1 | Adapter Wrench - Aft Cone Bolt Nut | 18 | |
| C71014-3 | WRENCH ADAPTER-AFT CONEBOLT NUT | 14 | |
| C71019-7 | ADAPTER WRENCH - AFT | 13 | |
| C71020-25 | Bracket - Dynamometer Adapter Assy | 1 | |
| C72928-12 | T-ADAPTER ASSY | 1 | |
| C72928-30 | T-ADAPTER ASSY | 1 | |
| C73001-1 | Remove/Install Adapter - CFM56-3 Fuel Pump and Main Eng.Control | 1 | |
| C79560 | Q-Spring torque adapter | 1 | |
| C80212-30 | ADAPTER-RUDDER PENAL FORCE CHECK | 1 | |
| C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 1 | |
| CAT5643-12C | ADAPTER, TOOL-TORQUE WRENCH | 2 | |
| CAT5643-13C | ADAPTER, TOOL-TORQUE WRENCH | 3 | |
| CB-21158148-002 | CB-21158148-002;USB External Audio Adapter Cable MSAM-V2 | 1 | |
| CB-22088875 | CB-22088875;BNC Female to SMA Female adapter | 1 | |
| CB-22135640 | CB-22135640;BNC to Twinax Adapter | 1 | |
| CB-45TO11-KIT1 | CB-45TO11-KIT1;Cable Set RJ 11 Patch W/Adapter | 1 | |
| CB-DCCLK | CB-DCCLK;DATACOM PIM Clock Adapter Cable | 1 | |
| CB-MINITOBNCQTY1 | CB-MINITOBNCQTY1;Adapter Mini-BNC to BNC - Quantity 1 | 1 | |
| CB-SMAF-SMBM | CB-SMAF-SMBM;SMA female to SMB male adapter | 1 | |
| CB-SMAM-TNCF | CB-SMAM-TNCF;SMA male to TNC female right angle adapter | 1 | |
| CB-SMBTOSMA | CB-SMBTOSMA;SMB to SMA Adapter | 1 | |
| CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
| CF-AA5713A M5 | ORIGINAL 15.6V 7.05A 110W 5.52.5MM CF-AA5713A M2 POWER CHARGER FOR PANASONIC TOUGHBOOK CF-31 CF-53 CF-52 CF-19 LAPTOP AC ADAPTER | 1 | |
| CGA 540 | REFILL COUPLING CGA 540 X 0.563 - 18UNF-2B THREADS REGULATOR TEST ADAPTER AVOX SYSTEMS (SAFRAN) | 1 | |
| CH723-464 | ADAPTER-7-16A-F | 1 | |
| CHIPI-X10 | CHIPI-X10 ADAPTER RS232 TO USB | 1 | |
| CIT-BFTA100-A03-060 | ADAPTER CABLE - FIBER OPTIC (BACC65AB2A/BACL10AL12FKAS) | 1 | |
| CIT-BFTA100-A06-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR (HUD, HDD, EAFR, ACP, ADB) | 1 | |
| CIT-BFTA100-A09-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR (HUD, HDD, EAFR, ACP, ADB) | 1 | |
| CIT-BFTA100-A11-060 | ADAPTER CABLE - FIBER OPTIC (BACC65AN2E/BACI10AL12FKAS) | 1 | |
| CIT-BFTA100-A17-060 | COM-15041 ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE DATA LOAD PORT) | 1 | |
| CIT-BFTA100-A18-060 | ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE DATA LOAD PORT) | 1 | |
| CIT-BFTA100-A21-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CN-E/BACI10AP06FAP) | 1 | |
| CIT-BFTA100-A22-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CN-E/BACI10AP06FAS) | 1 | |
| CIT-BFTA100-A23-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CM-E/BACI10AP06FAP) | 1 | |
| CIT-BFTA100-A24-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CM-E/BACI10AP06FAS) | 1 | |
| CIT-BFTA100-A28-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR | 1 | |
| CIT-BFTA100-A34-060 | ADAPTER CABLE - FIBER OPTIC | 1 | |
| CIT-BFTA100-K04 REV B | Adapter Cable Kit - Fiber Optic, Airplane Connecto | 1 | |
| CJMD107-003 | JACK ADAPTER (500, 550 AND 551, AIRPLANES - 0002 THRU 0626) | 3 | |
| CJMD207-003 | JACK ADAPTER (550 AIRPLANES -0627 THRU 0800, S550 AND 560 - 0001 THRU - 0538) | 5 | |
| CJMDL27-005 | ADAPTER -- TORQUE WRENCH | 1 | |
| CJMDX21-001 | TRONAIR K-1288 – CPU ADAPTER KIT FOR SELECT CESSNA CITATION AIRCRAFT | 5 | |
| CJMDX29-001 | ADAPTER -- HYDRAULIC SAMPLING | 1 | |
| CM-S-264 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool Set | 3 | |
| CM-S-264R | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool Set | 2 | |
| CM-S-288 | MIL-DTL-28840 Adapter Tool Set | 2 | |
| CM-S-288R | MIL-DTL-28840 Adapter Tool Set | 2 | |
| CM-S-389B | MIL-DTL-38999 Series IV Adapter Tool Set | 2 | |
| CM-S-389BR | MIL-DTL-38999 Series IV Adapter Tool Set | 2 | |
| CM-S-389L | MIL-DTL-38999 Series I Adapter Tool Set | 3 | |
| CM-S-389LR | MIL-DTL-38999 Series I Adapter Tool Set | 2 | |
| CM-S-389S | MIL-DTL-38999 Series II Adapter Tool Set | 3 | |
| CM-S-389SAB | MIL-DTL-38999 Series II Adapter Tool Set | 2 | |
| CM-S-389T | MIL-DTL-38999 Series III Adapter Tool Set | 4 | |
| CM-S-389TR | MIL-DTL-38999 Series III Adapter Tool Set | 2 | |
| CM-S-5015 | AS50151 and MIL-DTL-83723 Series II Adapter Tool Set | 2 | |
| CM-S-5015-SS | AS50151 and MIL-DTL-83723 Series II Adapter Tool Set | 2 | |
| CM-S-5015S | ADAPTER TOOL SET - ALUMINUM | 3 | |
| CM-S-815L | MIL-C-81511 Series I and III Adapter Tool Set | 2 | |
| CM-S-815R | MIL-C-81511 Series I, II, III, and IV Adapter Tool Set | 2 | |
| CM-S-815S | MIL-C-81511 Series II and IV Adapter Tool Set | 2 | |
| CM-S-837 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 3 | |
| CM-S-837RB | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 2 | |
| CM-S-837SS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 2 | |
| CM229-12 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-14 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-16 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-18 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-20 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-22 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-24 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-36 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-40 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229L-28 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-32 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-44 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-48 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-52 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM264-10 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-12 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-14 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-14S | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-16 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-18 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-20 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-22 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-24 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-8 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264R-10 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-12 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-14 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-16 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-18 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-20 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-22 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-24 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-8 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM288-11A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-11B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-13A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-13B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-15A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-15B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-17A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-17B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-19A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-19B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-23A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-23B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-25A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-25B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-29A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-29B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-33A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-33B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-11A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-11B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-13A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-13B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-15A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-15B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-17A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-17B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-19A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-19B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-23A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-23B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-25A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-25B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-29A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-29B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-33A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-33B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM389B-11 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-13 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-13S | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-15 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-17 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-19 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-21 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-23 | MIL-DTL-38999 Series 4 Adapter Tool | 2 | |
| CM389B-25 | MIL-DTL-38999 Series 4 Adapter Tool | 2 | |
| CM389BR-11 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-13 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-15 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-17 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-19 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-21 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-23 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-25 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389L-11 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-11S | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-13 | MIL-DTL-38999 Series I Adapter Tool | 3 | |
| CM389L-13S | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-15 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-17 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-19 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-21 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-23 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-25 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-25S | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-9 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-11 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-13 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-15 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-17 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-19 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-21 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-23 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-25 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-9 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389S-10 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-12 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-12S | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-14 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-14S | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-16 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-18 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-20 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-22 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-22S | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-24 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-8 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389T-11A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-11AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-11B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-11BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-17A | MIL-DTL-38999 Series III Adapter Tool | 3 | |
| CM389T-17AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-17B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-19A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-19B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-21A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-21AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-21B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-23A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-23AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-23B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-25A | MIL-DTL-38999 Series III Adapter Tool | 3 | |
| CM389T-25AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-25B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-11A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-11B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-13A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-13B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-15A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-15B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-17A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-17B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-19A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-19B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-21A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-21B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-23A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-23B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-25A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-25B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-9A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-9B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM5015-10 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-10S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-12 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-12S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-14 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-16 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-16S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-18 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-18S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-20 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-20S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-22 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-22S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-24 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-24S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-28 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-28S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-32 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-32S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-36 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 3 | |
| CM5015-36S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-40 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-40S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-44 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-44S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-48 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-48S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-8 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-8S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-10 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-12 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-14 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-16 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-18 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-20 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-22 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-24 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-28 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-28S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-32 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-36 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-40 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-44 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-48 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-8 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM815L-10A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-10B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-14A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-14B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-16A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-16B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-18A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-18B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-20A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-20B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-22A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-22B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-24A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-24B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-8A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-8B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815R-10 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-14 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-16 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-18 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-20 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-22 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-24 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-8 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815S-10A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-10B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-14A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-14B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-16A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-16B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-18A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-18B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-8 | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM837-10A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-10AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-10B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-10BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8C | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8CS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8D | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8DS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-10 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-12 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-14 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-16 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-18 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-20 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-22 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-24 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-24S | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-8 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| COM 2464 | ADAPTER - STARTER DRAIN, ENGINE | 1 | |
| COM-13438 | ADAPTER - PITOT TEST | 1 | |
| COM-13441 | ADAPTER - STATIC TEST | 1 | |
| COM-13482 | ADAPTER – PPRV REMOTE STATIC PORT PART OF SPL-6692 | 1 | |
| COM-13695 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | 1 | |
| COM-13696 | CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 1 | |
| COM-13697 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) | 1 | |
| COM-13750 | CABLE - ADAPTER, HHMPI (L-3 COMM F1000 DFDR ONLY) | 1 | |
| COM-17860 | ADAPTER - ELBOW FITTING, 37 DEGREE FLARED | 1 | |
| COM-1916 | COM-1916 PITOT TEST ADAPTER | 1 | |
| COM-1921 | ADAPTER - STATIC TEST | 1 | |
| COM-2464 | ADAPTER - STARTER DRAIN, ENGINE | 1 | |
| CP20128-5 | BAR - ADAPTER, RB211-524G/H ENGINE | 1 | |
| CP20128-6 | BAR - ADAPTER, RB211-524G/H ENGINE | 1 | |
| CP30089 | Adapter Hoist RB211-424 | 1 | |
| CP30248 | ADAPTER - LEFT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30249 | ADAPTER - CENTER (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30250 | ADAPTER - RIGHT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30809 | ADAPTER - HOIST KIT | 1 | |
| CP30839-3 | KIT - ADAPTER HOIST, RB211 ENGINES | 1 | |
| CS-710-207 | OPEN -END WRENCH ADAPTER | 1 | |
| CS-710-596 | HV TEST ADAPTER CABLE (POST SIL NO. H0212-25-0160) (CABLE LENGTH: 600 MM (23.62 IN.)) | 1 | |
| CSA125678-4 | Pitot Adapter for Hawker HS-125 600-900, F-70/100, BAE-146 | 1 | |
| CSA30024-4 | CESSNA C-208 PITOT TEST ADAPTER | 3 | |
| CSA74703HT-4-4 | ADAPTER - PROBE PITOT STATIC (SPL-5292) | 2 | |
| CSA75700HT - 3 | ADAPTER PILOT TEST - CSA75700HT - 3 | 3 | |
| CSA75700HT-3 | ADAPTER - PITOT TEST | 3 | |
| CSA77700HT-3 | ADAPTER - PROBE, PITOT-STATIC. | 2 | |
| CSA78700-3HT | ADAPTER - PITOT HEAD | 2 | |
| CST1450-4 | ADAPTER - STATIC LINE | 2 | |
| CST20250-4 | Stall Warning Adapter for HS-125 600-900, F-70/100, BAE-146 | 1 | |
| CSTH20180-4 | Static Adapter for Hawker HS-125 600-900, F-70/100, BAE-146 | 2 | |
| CSTL19725-4 | ADAPTER - STATIC TEST | 4 | |
| CT22045 | ADAPTER,TEST-INTERFACE | 1 | |
| CT22046 | ADAPTER-INTERFACE TEST | 1 | |
| CT29699-1 | ADAPTER,CABLE-BDM | 1 | |
| CT4103 | COAX ADAPTER KIT - CAL TEST CT4103 OR EQUIVALENT | 1 | |
| CX300-ADC | CX300-ADC;Power Adapter Automotive DC-DC | 1 | |
| D07103500000 | JACK ADAPTER-FUSELAGE | 1 | |
| D14089-101 | ADAPTER, VACUUM D14089-101 (WOODEN PACKING FIXTURE) | 4 | |
| D19946-101 | VACUUM ADAPTER PRE S.B. 004-25-48 | 2 | |
| D22827000 | ADAPTER-NLG JACK | 8 | |
| D23038000 | ADAPTER-MLG JACK | 2 | |
| DAH600865 | ADAPTER - TORQUE WRENCH, RAT | 3 | |
| DAPT-70-0003 | ADAPTER VERTICAL HOISTING PROPELLER DAPT70-000-629 | 1 | |
| DAPT61-0014-00 | ADAPTER-TORQUE | 1 | |
| DAPT61-0015-00 | ADAPTER-TO TORQUE PROP FASTENERS | 8 | |
| DAPT61-0015-00-IAS | ADAPTER-TORQUE PROP FASTENERS | 1 | |
| DAPT61-0015-00IAS | ADAPTER-TO TORQUE PROP FASTENERS | 1 | |
| DAPT61−0015−00-IAS | ADAPTER-TO TORQUE PROP FASTENERS | 1 | |
| DAPT65-0093-00 | ADAPTER-PRESSURIZATION, HYDRAULIC HAND PUMP | 7 | |
| DB-75 | ADAPTER DRAIN, STARTER，CFM56-7 ENGINGE | 5 | |
| DB75 | ADAPTER - DRAIN, STARTER, CFM56-7 ENGINE | 5 | |
| DB75-108 | ADAPTER - STARTER DRAIN, ENGINE | 3 | |
| DB75-48 | ADAPTER -STARTER FILL | 1 | |
| DC-10-22-10-03 | CENTRAL AIR DATA COMPUTER-REMOTE TEST ADAPTER ( DC-10 ) | 1 | |
| DC-600 | VENT VALVE TESTER WITH ADAPTERS DC-VT-SM8, DC-VT-U-B40 | 3 | |
| DC10-22-10-03 | CENTRAL AIR DATA COMPUTER-REMOTE TEST ADAPTER ( DC-10 ) | 1 | |
| DCM1608-1 | ADAPTER,INSTL/RMVL-NLG | 1 | |
| DCM1608-1 | ADAPTER,INSTL/RMVL-NLG | 1 | |
| DCM1630-1 | ADAPTER,INSTL/RMVL-MLG | 1 | |
| DCM1630-1 | ADAPTER,INSTL/RMVL-MLG | 1 | |
| DCM1885-THUMBSCREW-REVNC | KEYWAY ADAPTER FOR DB37 BACKSHELL - THUMBSCREW | 1 | |
| DG-200 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT, COM-754 | 11 | |
| DG1035AB03 | ADAPTER-DIGITAL/ANALOG | 1 | |
| DH8 - 723M | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 10 | |
| DH8-7-612 | KIT-PITOT STATIC TEST ADAPTER | 6 | |
| DH8-723 | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 3 | |
| DH8-723M | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 10 | |
| DH8-834 | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
| DH8-834M | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | 3 | |
| DMAK A-320-B | ADAPTER KIT PITOT STATIC AIRBUS - MARCHIORI | 1 | |
| DMAK-A320 | ADAPTER KIT MPS-34 AIRBUS | 3 | |
| DMAK-C-130HA | C-130H PITOT/STATIC ADAPTER KIT | 1 | |
| DMAK-EMB-170-190 | ADAPTERKIT AIR-DATA TESTER MPS35-C | 1 | |
| DMAK-PC12X-E1K0P0V3 | HOSE KIT FOR ADAPTER KIT DMAK-PC12 | 1 | |
| DMAKA320 | ADAPTER KIT MPS-34 AIRBUS | 3 | |
| DMC1682 | MIL-SPEC Adapter Tool Kit | 2 | |
| DN7ABF | -7 ADAPTER ASSEMBLY | 1 | |
| DPPH-150 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT | 3 | |
| DPS1000 | ADAPTER KIT - PITOT STATIC TESTER | 9 | |
| DRCADPH10-76/9100 | HEADSET ADAPTER WITHOUT PTT; MUST BE COMPATIBLE WITH H10-76 OR EQUAL HEADSET | 1 | |
| DRCADPH10-76/9100/U94 | DAVID CLARK HEADSET ADAPTER WITH PTT; MUST BE COMPATIBLE WITH H10-76 OR EQUAL HEADSET | 1 | |
| DRT63394-23 | ADAPTER-TORQUE | 1 | |
| DRT66981 | ADAPTER-MLG SHOCK ABSORBER | 2 | |
| DRT68238 | ADAPTER-TORQUE | 6 | |
| DRT68973 | ADAPTER, CHARGING - MLG | 12 | |
| DT-600 | ANALYZER - DATABUS, ARINC 429/629 (FORMER P/N 01-1405-00; DT600-00-110 FOR 110V & DT600-00-220 FOR 220V). INCLUDES ARINC 429/629 ADAPTER CABLES. ARINC 629 CABLE IS TO BE USED WITH A CUSTOMER SUPPLIED ARINC 629 COUPLER. | 4 | |
| DT600 | Analyzer - Databus, Datatrac 650H (DT650H). Includes Arinc 629 Adapter Cable To Be Used With Customer Furnished Arinc 629 Coupler. | 4 | |
| DZZ0011-505 | Adapters-outbd slat drive & aileron actuator hoisting | 1 | |
| DZZ0014-1 | Wrench-torque adapter | 1 | |
| DZZ0014-501 | Wrench-torque adapter | 1 | |
| DZZ7020-1 | Adapters-horiz stab acme screw+gear box | 5 | |
| DZZ7020-1-B102 | ADAPTER-HORIZONTAL STABILIZER | 1 | |
| DZZ7020-3 | ADAPTER - HOR STAB | 1 | |
| DZZ7026-501 | Adapter set-apu hoisting | 1 | |
| DZZ7029-1 | Adapter-strap component hoist | 1 | |
| DZZ7062-1 | Adapter set-MLG trunnion bolt torque | 1 | |
| DZZ7062-501 | Adapter set-MLG trunnion bolt torque | 1 | |
| DZZ7062-501-312 | ADAPTER SET - MLG TRUNNION BOL | 1 | |
| DZZ7075-1 | TORQUE ADAPTER - MLG TRUCK PIV | 1 | |
| DZZ7077-1-392 | ADAPTER-MLG RETRACT CYLINDER NUT TOR | 1 | |
| DZZ7080-1 | Adapter Assy - NLG Instl | 1 | |
| DZZ7080-501 | Adapter Set - NLG Instl | 2 | |
| DZZ7137-1 | Adapter set-MLG trim cylinder overhaul | 1 | |
| DZZ7146 | ADAPTER - OTBD ELEV | 1 | |
| DZZ7148 | ADAPTER - NLG UNLOCK | 1 | |
| DZZ7151-1 | Adapter-adg snubber nut torque | 1 | |
| DZZ7154-1 | ADAPTER - AXLE NUT | 7 | |
| DZZ7159-1 | Adapter-mlg torque link upper and lowek nut | 4 | |
| DZZ7160-1 | Adapter-MLG torque link apex nut | 3 | |
| DZZ7208-1 | Adapter-MLG auxiliary chamber torque | 2 | |
| DZZ7213-1 | ADAPTER - CARGO DOOR | 1 | |
| DZZ7225 | ADAPTER-TORQUE, AFT. ENG. MOUNT (CF6-50) | 1 | |
| DZZ7225 REV A | ADAPTER-TORQUE, AFT. ENG. MOUNT (CF6-50) | 1 | |
| DZZ7230-1 | Adapter-hinge pin puller，cargo door | 2 | |
| DZZ7230-501 | Adapter-hinge pin puller，cargo door | 1 | |
| DZZ7230-503 | Adapter-hinge pin puller，cargo door | 1 | |
| DZZ7243-501 | Set-adapter，axle sleeve puller，NLG | 1 | |
| DZZ7252 | ADAPTER - TEST ADG | 1 | |
| DZZ7252-1 | Adapter-test，ADG | 1 | |
| DZZ7282-1 | Adapter - MLG Jacking | 1 | |
| DZZ7297-1 | Torque adapter-clg strut lower bearing | 1 | |
| DZZ7320 | ADAPTER - JACKING | 1 | |
| DZZ7320-1 | Adapter，jacking-wing tip | 2 | |
| DZZ7355-175 | Adapter Assy - Fire Sys | 1 | |
| DZZ7369-1 | Adapter-antiskid transducer spin | 1 | |
| DZZ7369-501 | ADAPTER-ANTISKID TRANSDUCER SPIN | 1 | |
| DZZ7369-501-392 | ADAPTER-ANTISKID TRANSDUCER SPIN | 1 | |
| DZZ7380-1 | Adapter - Fuel Dump Drain | 3 | |
| DZZ7380-2 | Adapter - Fuel Dump Drain | 2 | |
| DZZ7382-1 | Adapter-cam follower torque，clearview window | 1 | |
| E20PWMC | E20PWMC;ADDITIONAL AC ADAPTER/CHARGER FOR MTS-2000 SMARTOTDR AND OPTIMETER | 1 | |
| E2J52189-2 | ADAPTER - ROTATE HP SYSTEM, BREATHER ROTOR | 1 | |
| E79-800PRESSADP/939 | ADAPTER-CABIN PRESSURE TEST | 1 | |
| E8115C-APC | E8115C-APC;OTDR Module C 1550nm APC connector - SC adapter Std | 1 | |
| E8115D-APC | E8115D-APC;OTDR Module D 1550nm APC connector - SC adapter Std | 1 | |
| E81162C-APC | E81162C-APC;OTDR Module C filtered 1625nm APC connector - SC adapter Std | 1 | |
| E81162D-APC | E81162D-APC;OTDR Module D filtered 1625nm APC connector - SC adapter Std | 1 | |
| E81165C-APC | E81165C-APC;OTDR Module C filtered 1650nm APC connector - SC adapter Std | 1 | |
| E81165D-APC | E81165D-APC;OTDR Module D Filtered 1650nm APC connector - SC adapter Std | 1 | |
| E8118RUHR65-APC | E8118RUHR65-APC;High Resolution OTDR Module filtered 1650nm APC connector - SC adapter Std | 1 | |
| E8123AV-PC | E8123AV-PC;High Resolution OTDR Module AV 850/1300nm PC connector - SC adapter Std | 1 | |
| E8126C-APC | E8126C-APC;OTDR Module C 1310/1550nm APC connector - SC adapter Std | 1 | |
| E8126C-PC | E8126C-PC;OTDR Module C 1310/1550nm PC connector - SC adapter Std | 1 | |
| E8126D-APC | E8126D-APC;OTDR Module D 1310/1550nm APC connector - SC adapter Std | 1 | |
| E8126D-PC | E8126D-PC;OTDR Module D 1310/1550nm PC connector - SC adapter Std | 1 | |
| E8129D-62-APC | E8129D-62-APC;OTDR Module D 1550/Filtered 1625nm APC connector - SC adapter Std | 1 | |
| E8129D-62-PC | E8129D-62-PC;OTDR Module D 1550/Filtered 1625nm PC connector - SC adapter Std | 1 | |
| E8136C-APC | E8136C-APC;OTDR Module C 1310/1550/1625nm APC connector - SC adapter Std | 1 | |
| E8136C-PC | E8136C-PC;OTDR Module C 1310/1550/1625nm PC connector - SC adapter Std | 1 | |
| E8136D-APC | E8136D-APC;OTDR Module D 1310/1550/1625nm APC connector - SC adapter Std | 1 | |
| E8136D-PC | E8136D-PC;OTDR Module D 1310/1550/1625nm PC connector - SC adapter Std | 1 | |
| E81BBS2A-APC | E81BBS2A-APC;Broadband Source Module for CD/PMD/AP APC connector - SC adapter Std | 1 | |
| E81BBS2A-PC | E81BBS2A-PC;Broadband Source Module for CD/PMD/AP PC connector - SC adapter Std | 1 | |
| E9ADAPTER19-21 | E9ADAPTER19-21;19/21 INCHES RACK MOUNTING ADAPTER | 1 | |
| E9ADAPTER19-23 | E9ADAPTER19-23;19/23 INCHES RACK MOUNTING ADAPTER | 1 | |
| EAA0355L10A | ADAPTER GM-1 | 1 | |
| EAA0355L30A | ADAPTER CHRY-1 | 1 | |
| EAA0355L31A | ADAPTER CHRY-2 | 1 | |
| EAA0355L40A | ADAPTER NISS-1 | 1 | |
| EAA0355L42A | ADAPTER MULTI-2 | 1 | |
| EAA0355L49A | ADAPTER JEEP-1 | 1 | |
| EAA0355L51A | ADAPTER HYUN-2 | 1 | |
| EAA0355L52A | ADAPTER TOY-2 | 1 | |
| EAA0355L53A | ADAPTER MAZDA-1 | 1 | |
| EAA0355L56A | ADAPTER VW-1 | 1 | |
| EAA0355L62A | ADAPTER MB-1 | 1 | |
| EAA0355L70A | ADAPTER FORD-4 | 1 | |
| EAA0355L74A | ADAPTER BM-1B | 1 | |
| EAA0355L75A | ADAPTER MB-2A | 1 | |
| EAA0355L90B | ADAPTER MULTI-1 | 1 | |
| EAA0360L00A | ADAPTER, HAR-1 POWER SPORTS | 1 | |
| EAK0222J40A | ADAPTER KIT-DUAL WHEEL | 1 | |
| EAK0222J83B | KIT-ADAPTER HUB MTG AC400 | 1 | |
| EAK0347L20A | ADAPTER, BM-2 | 1 | |
| EAK0347L21A | ADAPTER, DLC-1 | 1 | |
| EAK0347L22A | ADAPTER, HAR-2 | 1 | |
| EAK0347L23A | ADAPTER, POL-1 | 1 | |
| EAK0347L24A | ADAPTER, DUC-1 | 1 | |
| EAK0347L25A | ADAPTER, SUZ-1 | 1 | |
| EAK0347L26A | ADAPTER,HON-2 | 1 | |
| EAK0347L27A | ADAPTER, KAW-1 | 1 | |
| EAK0347L28A | ADAPTER, KAW-2 | 1 | |
| EAK0347L29A | ADAPTER, KAW-3 | 1 | |
| EAK0347L30A | ADAPTER, YAM-1 | 1 | |
| EAX0066L22A | ADAPTER SERIAL USB V-VW | 1 | |
| EAX0068L27A | OBDI CABLE ADAPTER, DA-6 | 1 | |
| ED1394-1 | ADAPTER - TORQUE, MANUAL LOCK RELEASE | 1 | |
| EECT900-10 | 5 VOLT ADAPTER MULTI-PROBE | 1 | |
| EEHD493128 | 9-PIN DEUTSCH ADAPTER - 1 METE | 1 | |
| EEHD499095 | PRO-LINK EDGE AC ADAPTER | 1 | |
| EEHD499098 | PRO-LINK EDGE HDMI WS ADAPTER | 1 | |
| EETA309A05A | 2NDARY COIL ADAPTER LEAD M-VP | 1 | |
| EINST20SW-AD | EINST20SW-AD;USB Adapter for Instrument to Optical Switch | 1 | |
| EINST20SW-PC | EINST20SW-PC;Protection for Instrument to optical switch adapter | 1 | |
| EMB-01411-005 | ADAPTER - CABIN PRESSURIZATION TEST | 2 | |
| EMB-01411-401 | Adapter-Cabin Pressurization Test | 1 | |
| EMS-MPO | EMS-MPO;MTP/MPO BULKHEAD ADAPTER WITH OPPOSED KEY | 1 | |
| EOTDR2-1610-M-LCPC-V1 | EOTDR2-1610-M-LCPC-V1;INTEGRATED MICRO OTDR CARD - 1610NM - TYPE M - LC/PC - V1/V2 ADAPTER | 1 | |
| EOTDR2-1610-M-SCPC-V1 | EOTDR2-1610-M-SCPC-V1;INTEGRATED MICRO OTDR CARD - 1610NM - TYPE M - SC/PC - V1/V2 ADAPTER | 1 | |
| EOTDR2-1625-M-SCPC-V1 | EOTDR2-1625-M-SCPC-V1;INTEGRATED MICRO OTDR CARD - 1625NM - TYPE M - SC/PC - V1/V2 ADAPTER | 1 | |
| EOTDR2-1625-MR-SCPC-V1 | EOTDR2-1625-MR-SCPC-V1;INTEGRATED MICRO OTDR CARD - 1625NM - TYPE M -REEL- SC/PC - V1/V2 ADAPTER | 1 | |
| EOTDR2-B1-LCPC-V1 | EOTDR2-B1-LCPC-V1;INTEGRATED MICRO OTDR CARD - 1625NM - TYPE B1 - LC/PC - V1/V2 ADAPTER | 1 | |
| EOTDR2-L-B1-LCPC-V1 | EOTDR2-L-B1-LCPC-V1;INTEGRATED MICRO OTDR CARD - 1625NM - TYPE B1 - LC/PC - V1/V2 ADAPTER | 1 | |
| ESCREWDRIVER-SENKO | ESCREWDRIVER-SENKO;SCREWDRIVER FOR SENKO OPTICAL ADAPTERS | 1 | |
| ETOR.101 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 2 | |
| ETOR.102 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 1 | |
| EUFCADS | EUFCADS;FC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- | 1 | |
| EUFCADSMM | EUFCADSMM;FC UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EULCADS | EULCADS;LC-PC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- blue color | 1 | |
| EULCADS-APC | EULCADS-APC;LC-APC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- green color | 1 | |
| EULCADSMM | EULCADSMM;LC UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EUPP125PM-10 | EUPP125PM-10;Pack of 10 1.25 mm UPP adapter for PM mainframe option | 1 | |
| EUSCADS | EUSCADS;SC-PC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- blue color | 1 | |
| EUSCADS-APC | EUSCADS-APC;SC-APC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- green color | 1 | |
| EUSCADSMM | EUSCADSMM;SC UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EUSTADS | EUSTADS;ST UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- | 1 | |
| EUSTADSMM | EUSTADSMM;ST UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| F-285M-03 | ADAPTER-FIBRE OPTIC | 1 | |
| F-28SM-01 | ADAPTER - FIBER OPTIC, SC | 1 | |
| F-28SM-03 | ADAPTER - FIBER OPTIC, SC | 2 | |
| F0808MT1-A01-003.3 | ADAPTER CABLE - FIBER OPTIC, SC-SC | 1 | |
| F080MT1A010033 | ADAPTER CABLE-FIBER OPTIC SC-SC | 1 | |
| F0812MT1A01 | ADAPTER CABLE - FIBER 0PTIC, SC-LC | 1 | |
| F0812MT1A010033 | ADAPTER CABLE-FIBER OPTIC SC-LC | 1 | |
| F28SM-03 | ADAPTER-FIBER OPTIC ,SC | 2 | |
| F533-R1115-000W6400-01 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=953 | 1 | |
| F533-R1115-000W6400-02 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=953 | 1 | |
| F533-R1115-000W6400-03 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=1456 | 1 | |
| F533-R1115-000W6400-04 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=1456 | 1 | |
| F533-R1115-001W6400-01 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=953 | 1 | |
| F533-R1115-001W6400-02 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=953 | 1 | |
| F533-R1115-001W6400-03 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=1456 | 1 | |
| F533-R1115-001W6400-04 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=1456 | 1 | |
| F65-0-3311 | ADAPTER - TEST, NOSE WHEEL STEERING METERING VALVE (SPL-5281) | 2 | |
| F70009 | ADAPTER ASSY -0 AIRCRAFT JACKING USED TO ADAPT | 1 | |
| F70009-1 | ADAPTER ASSY -0 AIRCRAFT JACKING USED TO ADAPT | 1 | |
| F70051 | ADAPTER -0 THRUST REVERSER HOIST JT3C USED IN | 1 | |
| F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | 1 | |
| F70068 | ADAPTER -0 THRUST REVERSER WRENCH USED TO DRIVE | 1 | |
| F70103 | ADAPTER -0 THRUST REVERSER AND SOUND SUPP USED | 1 | |
| F70174 | THRESHOLD ADAPTER SET -0 CARGO LOADING PROVIDES | 1 | |
| F70174-1 | THRESHOLD ADAPTER -0 CARGO | 1 | |
| F70174-2 | THRESHOLD ADAPTER -0 CARGO | 1 | |
| F70174-3 | THRESHOLD ADAPTER -0 CARGO | 1 | |
| F70175-1 | Wrench adapter-face spanner，LUG | 1 | |
| F70194-1 | ADAPTER-TILT TABLE | 4 | |
| F70206-1 | Adapter Assembly - Hollow Bolt, Fuel Leak Tracing | 12 | |
| F70206-1-ML | ADAPTER LESS -21 | 1 | |
| F70245 | ADAPTER -0 BATTERY CHARGER TO BATTERY TO | 1 | |
| F70249 | APU ADAPTER STAND AND TRANS. CART THE F70249-1 | 1 | |
| F70252-1 | Adapter - Roller Pailet | 1 | |
| F70255 | WRENCH ADAPTER -0 HOUSING NUT, ACTUATOR THIS | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70291 | ADAPTER SET -0 TORQUE WRENCH USED TO TORQUE | 1 | |
| F70291-1 | ADAPTER-TORQUE WRENCH | 2 | |
| F70291-2 | Adapter assy-ext，9/16 wrench | 1 | |
| F70291-3 | Adapter assy-int， 9/16 wrench | 1 | |
| F70291-4 | Adapter assy-ext，1/2 wrench | 1 | |
| F70291-5 | Adapter assy-ext，3/8 wrench | 1 | |
| F70291-6 | Adapter assy-ext，5/16 wrench | 1 | |
| F70291-7 | Adapter assy-int,7/32 wrench | 1 | |
| F70300-1 | Adapter - Flap Drive | 24 | |
| F70304 | ADAPTER -0 RESTRAINING LINE, VERTICAL FIN USED | 1 | |
| F70306 | TORQUE ADAPTER -0 SKID DETECTOR NUT, MLG TO | 1 | |
| F70312-18 | ADAPTER - TORQUE WRENCH | 2 | |
| F70312-20 | ADAPTER - TORQUE, RETRACT ACTUATOR NOSE LANDING GEAR | 1 | |
| F70312-23 | TORQUE WRENCH ADAPTER CROW-FOOT SPL-5284 | 1 | |
| F70312-25 | TORQUE WRENCH ADAPTER CROW-FOOT 3.000（NOM'L）A/C FLATS | 2 | |
| F70312-29 | WRENCH ADAPTER - CROWFOOT, 4.515-4.525 SPAN | 5 | |
| F70312-3 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATO | 10 | |
| F70312-32 | ADAPTER - WRENCH, CROWFOOT | 8 | |
| F70312-4 | TORQUE WRENCH ADAPTER - BOX TYPE | 7 | |
| F70312-46 | Wrench-Adapter,Crowfoot,4.515-4.525 | 8 | |
| F70326-1 | Adapter - Torque Wrench, Manual Stab Trim Wheel | 15 | |
| F7033-1 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F7033-21 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F7033-24 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F7033-25 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F70333 | ADAPTER-CONSTANT SPEED DRIVE&A.C GENERATOR | 1 | |
| F70333-24 | ADAPTER - & JACK | 12 | |
| F70333-25 | ADAPTER - CONSTANT SPEED DRIVE | 8 | |
| F71138 | ADAPTER ASSY -0 AIRCRAFT JACKING TO PROVIDE A | 1 | |
| F71139 | ADAPTER -0 AIRCRAFT JACKING | 9 | |
| F71188 | ADAPTER ASSY -0 HYDRAULIC PRESSURE USED DURING | 1 | |
| F71188-500 | Adapter Assy - Hydraulic Pressure | 1 | |
| F71206 | ADAPTER ASSY -0 AC GENERATOR/DRIVE MOUNT. USED | 1 | |
| F71252 | ADAPTER - 16/32 INCH SPLINE, 3/4 INCH MALE HEX | 12 | |
| F71267 | ADAPTER – 16/32-INCH SPLINE, 3/4-INCH MALE HEX | 25 | |
| F71268 | WRENCH ASSY -0 AIR COND. ADAPTER SEC. TO HOLD | 1 | |
| F71403 | ADAPTER ASSY-TAIL PIPE & TR,JT3D FOR INSTL AND | 1 | |
| F71420 | TEST SET & ADAPTER ASSY -0 HF COMM SYS USED AS A | 1 | |
| F72714-81 | ADAPTER ASSY - FUEL QTY SYS | 1 | |
| F72731-102 | ADAPTER ASSY-FUEL QUANTITY SYS | 3 | |
| F72731-114 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 502 | 3 | |
| F72731-115 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 503 | 3 | |
| F72731-116 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 2 | |
| F72731-117 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 504 | 2 | |
| F72731-118 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 505 | 4 | |
| F72731-119 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 506 | 2 | |
| F72731-120 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 507 | 1 | |
| F72731-121 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 508 | 1 | |
| F72731-130 | ADAPTER-FUEL QTY | 8 | |
| F72731-130-E | ADAPTER-FUEL QTY | 1 | |
| F72731-81 | ADAPTER ASSY-FUEL QUANTITY SYS | 7 | |
| F72731-82 | ADAPTER ASSY-FUEL&OIL QUANTITY INDICAT | 5 | |
| F72823-2 | Test Adapter Assembly - Static Port | 1 | |
| F72823-23 | TEST ADAPTER ASSEMBLY - STATIC PORT | 3 | |
| F72823-33 | TEST ADAPTER ASSEMBLY - STATIC PORT | 1 | |
| F72823-36 | TEST ADAPTER ASSY -0 STATIC PORT | 6 | |
| F72823-37 | TEST ADAPTER ASSY -0 STATIC PORT | 2 | |
| F72823-38 | TEST ADAPTER ASSY -0 STATIC PORT | 1 | |
| F72823-39 | TEST ADAPTER ASSEMBLY - STATIC PORT | 1 | |
| F72823-40 | TEST ADAPTER ASSEMBLY - STATIC PORT | 18 | |
| F72849-1 | ADAPTER ASSY - BRAKE | 3 | |
| F72867-1 | Adapter Assembly - Control Wheel, Torque and Force Test | 23 | |
| F72867-1 | ADAPTER ASSEMBLY - CONTROL WHEEL | 23 | |
| F72883-10 | ADAPTER ASS'Y SET-LUBRFITTRACKROLLE | 4 | |
| F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | 1 | |
| F72899-1 | Wrench adapter-MLG man ext shaft BRG retainer unt | 1 | |
| F72900 | TORQUE ADAPTER- AILERON CONTROL CAPTAINS TO | 1 | |
| F72900-1 | Torque adapter-aileron control column,captains | 5 | |
| F72907 | ADAPTER ASSY-LUBRICATION FTG,INBD AIL. TAB ROD. | 1 | |
| F72914 | TORQUE ADAPTER ASSY -0 RUDDER CONTROL POWER UNIT | 1 | |
| F72914-1 | Torque adapter assy-rudder control power unit instl | 3 | |
| F72915 | TORQUE WRENCH ADAPTER ASSY -0 CLAMSHELL JAM NUT. | 1 | |
| F72915-1 | Torque wrench adapter assy-clamshell jam nut | 2 | |
| F72922 | TORQUE ADAPTER -0 MLG FWD TRUNNION BOLT USED TO | 1 | |
| F72922-1 | Torque adapter-MLG fwd trunnion bolt | 1 | |
| F72922-4 | Torque adapter-MLG fwd trunnion bolt | 6 | |
| F72925-15 | ADAPTER SET - PROTACTOR, FWD THRUST LEVER | 1 | |
| F72928-12 | T-Adapter Assy | 1 | |
| F72928-30 | T-Adapter | 1 | |
| F72930 | TORQUE ADAPTER -0 MLG SIDE STRUT TO TORQUE FWD. | 1 | |
| F72930-1 | Torque adapter-main landing gear side strut | 1 | |
| F72935 | ADAPTER -0 ENG FUEL FEED LINE EVACUATION | 1 | |
| F72941 | ADAPTER -0 PRESSURE LIMITING, GREASE GUN TO | 1 | |
| F72946-1 | DOLLY, WORK STAND,& ADAPTER-THRUST RVRSR TO | 1 | |
| F72946-2 | Dolly. Work Stand And Adapter -Thrust Reverser | 1 | |
| F72950-128 | APU Adapter Stand - Model 737 | 1 | |
| F72950-4 | APU ADAPTER - 727 | 1 | |
| F72952-1 | Adapter Set - Protactor, Fwd Thrust Lever | 2 | |
| F72952-14 | Adapter Set - Protractor, FWD Thrust Lever | 8 | |
| F72952-14 -15 | Adapter Set -Protractor. Forward Thrust Lever | 1 | |
| F72952-15 | ADAPTER - PROTRACTOR | 23 | |
| F72952-3 | ADAPTER SET -0 PROTRACTOR, FWD THRUST LEVER USED | 1 | |
| F72954 | HOIST ADAPTER -0 AUXILIARY POWER UNIT TO HANDLE | 1 | |
| F72955 | ADAPTER -0 TORQUE WRENCH, LG TRUNNION NUT TO | 1 | |
| F72957-51 | ADAPTER - TOWBAR | 2 | |
| F72977-29 | ADAPTER EXTENSION -0 SOLDER | 1 | |
| F72977-62 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM GAUGE SET | 16 | |
| F72977-64 | Adapter Assy - Hyd Brake System Pressure Checking | 12 | |
| F72986 | ADAPTER-TORQUE WRENCH, MLG UP-LOCK, TEST WRENCH | 1 | |
| F72986-1 | ADAPTER TORQUE UP-LO | 4 | |
| F72998-1 | Adapter Cable - N1 Simulator | 1 | |
| F72998-15 | Adapter Cable - N1 Simulator | 1 | |
| F80-0-1552-14 | Adapter-Torque Wrench | 1 | |
| F80-0-2705 | ADAPTER TORQUE WRENCH (NSN 5120-01-320-1495) KC135 | 3 | |
| F80-4-67 | Adapter-Torque Wrench | 1 | |
| F80-4-67PM | ADAPTER-TORQUE WRENCH | 1 | |
| F8000-1 | ADAPTER - AFT JACK | 1 | |
| F8000-7 | ADAPTER - FWD JACK | 1 | |
| F80000 | ADAPTER-AIRCRAFT JACKING | 1 | |
| F80000-1 | JACKING PADS - AFT ADAPTER | 7 | |
| F80000-7 | Adapter - Fwd Aircraft Jacking | 24 | |
| F80001-1 | ADAPTER - AIRCRAFT JACKING (AFT BODY) | 22 | |
| F80011-1 | CRADLE ADAPTER - AC GENERATOR AND CSD | 4 | |
| F80011-16 | CRADLE ADAPTER - AC GENERATOR AND CSD | 3 | |
| F80012-1 | Adapter Assy - Pin Spanner | 8 | |
| F80013-1 | ADAPTER - PIN SPANNER | 14 | |
| F80014-16 | HOIST ADAPTER-STAB JACKSCREW | 14 | |
| F80014-2 | STAB.JACKSCREW-HOIST ADAPTER | 13 | |
| F80020 | WRENCH-ADAPTER 737 MLG TRUNNION PIN NUT | 1 | |
| F80020-2 | WRENCH - ADAPTER | 1 | |
| F80020-3 | WRENCH - ADAPTER | 1 | |
| F80020-4 | WRENCH - ADAPTER | 1 | |
| F80020-5 | WRENCH-ADAPTER 737 MLG TRUNNION PIN NUT | 16 | |
| F80020-8 | WRENCH - ADAPTER | 1 | |
| F80026-1 | Adapter -Elevator Hoisting | 8 | |
| F80032-1 | Wrench Adapter - Face Spanner Lug, MLG | 7 | |
| F80033 | ADAPTER ASSY-WRENCH,HOOK SPANNER | 1 | |
| F80033-1 | Adapter Assembly - Wrench, Hook Spanner | 21 | |
| F80033-8 | Adapter Assembly - Wrench, Hook Spanner | 22 | |
| F80033-8-M | ADAPTER -0 WRENCH | 1 | |
| F800331-1 | ADAPTER ASSY -NLG STRUT | 1 | |
| F800331-8 | ADAPTER ASSY -NLG STRUT | 1 | |
| F80036 | -1 ADAPTER -0 SLOTTED 45 SPANNER | 1 | |
| F80051-1 | ADAPTER - LUG WRENCH | 1 | |
| F80057-1 | ADAPTER WRENCH-AFT CONE | 13 | |
| F80060-1 | ADAPTER - AIRPLANE JACKING | 3 | |
| F80060-6 | ADAPTER - AIRPLANE JACKING | 25 | |
| F80091-1 | Threshold Adapter Set -Cargo Loading | 1 | |
| F80091-3 | Threshold Adapter Set -Cargo Loading | 1 | |
| F80122-11 | U-JOINT ADAPTER EQPT | 2 | |
| F80122-12 | U-JOINT ADAPTER EQPT- | 5 | |
| F80122-13 | U-JOINT ADAPTER EQPT | 2 | |
| F80122-14 | U-JOINT ADAPTER EQPT- | 13 | |
| F80122-15 | U-JOINT ADAPTER EQPT- | 12 | |
| F80122-16 | U-JOINT ADAPTER EQPT | 11 | |
| F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | 1 | |
| F80167-16 | NEEDLE ADAPTER- WELD | 1 | |
| F80167-17 | NEEDLE ADAPTER- WELD | 1 | |
| F80167-5 | NEEDLE ADAPTER- WELD | 1 | |
| F80167-6 | NEEDLE ADAPTER- WELD | 1 | |
| F80167-7 | NEEDLE ADAPTER -0 WELD | 1 | |
| F80171-1 | Adapter - Torque, Galley and Entry Door | 8 | |
| F80176 | ADAPTER, TORQUE WRENCH- MLG | 1 | |
| F80176-1 | TORQUE WRENCH ADAPTER - MAIN LANDING GEAR TRUNNION, AFT BEARING NUT | 5 | |
| F80176-8 | TORQUE WRENCH ADAPTER- | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80176-9 | ADAPTER -0 WELDMENT | 1 | |
| F80186-3 | WHEEL ADAPTER MAIN- WHEEL REPLACEMENT | 1 | |
| F80192-1 | ADAPTER-TORSION TEST | 3 | |
| F80202-1 | ALLEN ADAPTER-NOSE WHEEL | 8 | |
| F80212 | ADAPTER - RUDDER PEDAL FORCE CHECK | 1 | |
| F80212 REV B | ADAPTER - RUDDER PEDAL FORCE CHECK | 1 | |
| F80212-1 | ADAPTER - RUDDER PEDAL FORCE CHECK | 3 | |
| F80212-10 | ADAPTER -0 RUDDER PEDAL FORCE | 1 | |
| F80212-19 | CHECK ADAPTER - RUDDER PEDAL FORCE | 6 | |
| F80212-30 | Adapter - Rudder Pedal Force Check | 20 | |
| F80212-30-M | ADAPTER-RUDDER PEDAL FORCE | 1 | |
| F80212-31 | Adapter-rudder pedal force check | 1 | |
| F80228-1 | ADAPTER CABLE - N1 OR N2 SIMULATOR | 1 | |
| F80228-15 | ADAPTER CABLE - N1 OR N2 SIMULATOR | 1 | |
| F80229 | CABLE ADAPTER ASSY-FIRE EXT SYS | 4 | |
| F80229-20 | CABLE ADAPTER ASSY-FIRE EXT SYS | 16 | |
| F80229-48 | CABLE ADAPTER ASSY-FIRE EXT SYS | 13 | |
| F80229-57 | FIR EXT SYS-ADAPTER CABLE | 6 | |
| F80229-59 | CABLE ADAPTER ASSY-FIRE EXT SYS | 15 | |
| F80229-60 | ADAPTER CABLE ASSEMBLY - FIREX | 8 | |
| F80229-61 | CABLE ADAPTER ASSY-FIRE EXT SYS | 15 | |
| F80254 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| F80257 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| F80259-1 | ADAPTER - TORQUE WRENCH | 2 | |
| F80259-1 -2 -3 -4 | Adapter -Torque Wrench | 1 | |
| F80259-2 | ADAPTER - TORQUE WRENCH | 2 | |
| F80259-3 | Adapter-Torque Wrench | 3 | |
| F80259-3PM | ADAPTER-TORQUE WRENCH 1,000 | 1 | |
| F80259-4 | ADAPTER - TORQUE WRENCH | 2 | |
| F97000F38301005000 | FILL-IN/FLUSH LINE ADAPTER | 1 | |
| FA-SCSC-SS | ADAPTER - FIBER OPTIC, SC-SC SINGLEMODE | 1 | |
| FAL1669503 | ADAPTER 50-PIN BREAK-OUT BOX | 1 | |
| FAL1669503 OR TF50B39001 | ADAPTER OR 50-PIN BREAK OUT BOX | 1 | |
| FB98D0130 | COM-1926 A320 ADAPTER FLUSHING AIR DATA SYSTEM | 1 | |
| FBO-1 | TWO-CYLINDER REFILL STATION FBO-1 – INCLUDES THE GAUGE, THREE ADAPTERS (540, PB, AND SCOTT), RESTRICTOR, SS BRAIDING/HARDWARE FOR TWO CYLINDERS (LEASED FROM YOUR LOCAL GAS SUPPLY COMPANY) | 1 | |
| FBP3-UA | FBP3-UA;Single Tip Adapter for FBP3--Rev0 | 1 | |
| FBPP-DPAC8 | FBPP-DPAC8;USB OTG Adapter Cable USB Type A Female to Micro USB Male 15cm | 1 | |
| FBPP-TACS1 | FBPP-TACS1;CASE PLASTIC WITH DIVIDERS FOR TIPS AND ADAPTERS | 1 | |
| FBPP-WIFI | FBPP-WIFI;WiFi Adapter Module for FBP-P5000i | 1 | |
| FBPT-MIL-2CPA | FBPT-MIL-2CPA;Test Probe Adapter for M38999 for FBP--Rev0 | 1 | |
| FBPT-RQX8-P | Inspection Adapter - Fiber Optic, Quadrax, Plug | 1 | |
| FBPT-UFCPT | FBPT-UFCPT;Ribbon FCPT Tip Adapter for FBP Probes | 1 | |
| FBPT-UFMA | FBPT-UFMA;Universal Flare Adapter Connects FMA Adapters to FBP | 1 | |
| FBPT-UFMAE | FBPT-UFMAE;Adapter Universal FMAE For--Rev01 | 1 | |
| FCLP-LAN-10 | FCLP-LAN-10;Lanyard for FCLT Tips and Mating Adapters 10 cm | 1 | |
| FCLP-LAN-10-2S | FCLP-LAN-10-2S;Dual Snap Lanyard for FCLT Tips and Mating Adapters | 1 | |
| FCLT-CS-CF-MA | FCLT-CS-CF-MA;Mating Adapter for FCLT-CS-CF CleanBlast Tip | 1 | |
| FCLT-FC-CF-MA | FCLT-FC-CF-MA;Mating Adapter for FCLT-FC-CF | 1 | |
| FCLT-LC-CF-MA | FCLT-LC-CF-MA;Mating Adapter for FCLT-LC-CF Cleaning Tip | 1 | |
| FCLT-MDC-CF-MA | FCLT-MDC-CF-MA;Mating Adapter for FCLT-MDC-CF CleanBlast Tip | 1 | |
| FCLT-MIL2-CPA | FCLT-MIL2-CPA;CleanBlast Tip for Use with Glenair 38999 Test Probe Adapter | 1 | |
| FCLT-MMC-CF-MA | FCLT-MMC-CF-MA;Mating Adapter for FCLT-MMC-CF Cleaning Tip | 1 | |
| FCLT-MT-MA | FCLT-MT-MA;Mating Adapter for FCLT-MT CleanBlast Tip | 1 | |
| FCLT-MTP-MA | FCLT-MTP-MA;Mating Adapter for FCLT-MTP CleanBlast Tip | 1 | |
| FCLT-SC-CF-MA | FCLT-SC-CF-MA;Mating Adapter for FCLT-SC-CF Cleaning Tip | 1 | |
| FCLT-SMA-MA | FCLT-SMA-MA;Mating adapter for FCLT-SMA Cleaning Tip | 1 | |
| FCLT-SN-BTW1-CF-MA | FCLT-SN-BTW1-CF-MA;Mating Adapter for FCLT-SN-CF to BTW1 CleanBlast Tip | 1 | |
| FCLT-SN-BTW2-CF-MA | FCLT-SN-BTW2-CF-MA;Mating Adapter for FCLT-SN-CF to BTW2 CleanBlast Tip | 1 | |
| FCLT-SN-CF-MA | FCLT-SN-CF-MA;Mating Adapter for FCLT-SN-CF CleanBlast Tip | 1 | |
| FCLT-U12-MA | FCLT-U12-MA;Mating Adapter for FCLT-U12 CleanBlast Tip | 1 | |
| FCLT-U25-MA | FCLT-U25-MA;Mating Adapter for FCLT-U25 CleanBlast Tip | 1 | |
| FCPP-PS1 | FCPP-PS1;Single USB Output AC Input Charger With US EU UK AU Adapters | 1 | |
| FCPT-UFBPT | FCPT-UFBPT;Adapter Sidewinder to FBP Probe Interface | 1 | |
| FCS.ADP-CFM565B | ADAPTER FOR CFM56-5B ENGINE | 1 | |
| FCS.ADP-CFM567B | ADAPTER FOR CFM56-7B ENGINE | 1 | |
| FCS.ADP-GE9094 | ADAPTER FOR GE90-94B ENGINE | 1 | |
| FDS40-0201 | CABLE-ADAPTER, HHMPI (L-3 COMM F100 DFDR ONLY) | 6 | |
| FDS40-0202 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) | 7 | |
| FDS40-0203 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | 7 | |
| FDS40-0215 | RACK ADAPTER HHMPI FDS40-0301 FOR HONEYWELL P/N 980-6022-001 CVR, | 4 | |
| FDS40-0232 | COM-13696 CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 5 | |
| FDS40-0247 | 2100RACK ADAPTER (ON-AIRCRAFT) | 3 | |
| FDS40-0274 | CABLE - ADAPTER, HHMPI (FOR HONEYWELL MODEL HFR5-V SSCVR) | 2 | |
| FDS40-0322 | POWER SUPPLY - MPI (WALL CHARGER WITH ADAPTERS) | 2 | |
| FDS400-201 | COM-13750 Cable - Adapter, HHMPI (L-3 Comm F1000 DFDR only) | 6 | |
| FDS400-202 | COM-13697 Cable - Adapter, HHMPI (L-3 Comm FA2100 DFDR only) | 7 | |
| FDS400-203 | COM-13695 Cable - Adapter, HHMPI (Honeywell SSDFDR only) | 7 | |
| FDS400-232 | COM-13696 CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 5 | |
| FDS400-322 | Power Supply - MPI (wall charger with adapters) | 2 | |
| FE171901 | ADAPTER-TORQUE | 8 | |
| FFL-050 | FFL-050;FFL-050 Pocket Visual Fault Locator 1mW - includes 1.25 mm adapter | 1 | |
| FFL-050-U12 | FFL-050-U12;FFL-050-U12 Adapter 1.25mm for FFL-050 | 1 | |
| FFL-100-ENC | FFL-100-ENC;VISUAL FAULT LOCATOR WSI 2.5MM WITH 1.25MM ADAPTER | 1 | |
| FFL-U12 | FFL-U12;ADAPTER NF380 U1.25MM--REVA | 1 | |
| FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | 1 | |
| FGFB932303 | ADAPTER - NLG WHEEL REM/INS | 1 | |
| FI-60 | FI-60;Live Fiber Identifier VP-60 OPM w/LFI Attachment 2.5mm and 1.25mm Adapters | 1 | |
| FIT-SD103 | FIT-SD103;Kit FBP-P5000I And MP-60 Fibercheckpro SW Case Tips And Adapters | 1 | |
| FIT-SD103-C | FIT-SD103-C;Kit P5000I And MP-60 FiberChekPro SW Cleaning Tips Adapterskit P5000I And MP-60 FiberChekPro SW Cleaning Tips Adapters | 1 | |
| FIT-SD113 | FIT-SD113;Kit FBP-P5000I And MP-80 Fibercheckpro SW Case Tips And Adapters | 1 | |
| FITP-UPP12 | FITP-UPP12;FITP-UPP12 MP/HP2/HP3 OPM UPP Adapter 1.25mm | 1 | |
| FITP-UPP25 | FITP-UPP25;UPP Adapter for 2.5mm - SC-ST-FC | 1 | |
| FJC01-35-13000 | SUPPORT-ADAPTER OUTER (OUTER WING ADAPTER) | 1 | |
| FJC01-35-42000 | ADAPTER JACK BALLE -NLG | 1 | |
| FJC02-35-20000 | TRIPED JACK-ADAPTER REARFUSLAGE | 1 | |
| FJC02-35-41000 | ADAPTER JACK BALLE -MLG | 1 | |
| FJCO1-35-13000 | SUPPORT-ADAPTER OUTER | 1 | |
| FJCO3-35-24000 | SUPPORT-ADAPTER REARFUSELAGE | 1 | |
| FL6007-WS5-01 GB | RADIO ADAPTER, HI-VIS GREEN | 3 | |
| FLUKE 28 II EX | ADAPTER KIT-CSC AND C-TOP CART | 6 | |
| FLUKE TL82 | AUTOMOTIVE PIN-AND-SOCKET ADAPTER KIT | 2 | |
| FM000846 | ADAPTER - NOSE WHEEL AXLE | 1 | |
| FM001486 | ADAPTER - MAIN WHEEL MENA | 1 | |
| FMA-BIC | FMA-BIC;Adapter Biconic Male Threaded--Rev01 | 1 | |
| FMA-COD | FMA-COD;Adapter OptiTap Male Threaded | 1 | |
| FMA-COD-MTA-P | FMA-COD-MTA-P;Adapter OptiTip and HMFOC SM Plug Male Threaded--REV0 | 1 | |
| FMA-CS | FMA-CS;Adapter CS Male Threaded | 1 | |
| FMA-D4 | FMA-D4;Adapter D4 Male Threaded--Rev0 | 1 | |
| FMA-E2A | FMA-E2A;Adapter E2000 APC Male Threaded | 1 | |
| FMA-FC-APC | FMA-FC-APC;Adapter FC-APC Male Threaded--REV01 | 1 | |
| FMA-FCPC | FMA-FCPC;ADAPTER FC MALE THREADED--REVA | 1 | |
| FMA-LC | FMA-LC;Adapter LC Male Threaded--REVB1 | 1 | |
| FMA-LC-2X | FMA-LC-2X;Adapter LC Duplex Male Threaded | 1 | |
| FMA-LC-APC | FMA-LC-APC;Adapter LC-APC Male Threaded--REV01 | 1 | |
| FMA-LCA-2X | FMA-LCA-2X;Adapter LC-APC Duplex Male Threaded | 1 | |
| FMA-MIL1 | FMA-MIL1;Adapter Mil 29504-14-15 Termini Male Threaded--Rev0 | 1 | |
| FMA-MIL2 | FMA-MIL2;Adapter Mil 29504-4-5 Termini Male Threaded | 1 | |
| FMA-MT | FMA-MT;Adapter MT Male Threaded X-Y Axis Pan-Scroll | 1 | |
| FMA-MTA | FMA-MTA;Adapter MT-APC Male Threaded X-Y Axis Pan-Scroll | 1 | |
| FMA-MTP | FMA-MTP;Adapter MTP Male Threaded X-Y Axis Pan-Scroll | 1 | |
| FMA-MTPA | FMA-MTPA;Adapter MTP-APC Male Threaded X-Y Axis Pan-Scroll | 1 | |
| FMA-MTRJ-1 | FMA-MTRJ-1;Adapter MTRJ Male Threaded Simple Type--RevE | 1 | |
| FMA-SC | FMA-SC;Adapter SC Male Threaded--Revc | 1 | |
| FMA-SC-APC | FMA-SC-APC;Adapter SC-APC Male Threaded--REV02 | 1 | |
| FMA-SMA | FMA-SMA;Adapter SMA Male Threaded--RevB | 1 | |
| FMA-ST | FMA-ST;Adapter ST Male Threaded | 1 | |
| FMA-U12 | FMA-U12;Adapter Universal 1.25mm Male Threaded--RevB | 1 | |
| FMA-U25-SF | FMA-U25-SF;Adapter Universal 2.5mm Male Threaded Slip FIT--Rev0 | 1 | |
| FMA-UA12-P | FMA-UA12-P;Adapter Universal 1.25mm APC Male Threaded | 1 | |
| FMA-UAPC | FMA-UAPC;Adapter Universal 2.5mm APC Male Threaded--RevB | 1 | |
| FMA-URM | FMA-URM;Adapter URM-PC Male Threaded | 1 | |
| FMA-URMA | FMA-URMA;Adapter URM-APC Male Threaded | 1 | |
| FMAG-AC951 | FMAG-AC951;Magnetic Adapter for AC951 Universal Clamshell | 1 | |
| FMAG-LC | FMAG-LC;Adapter Magnetic for LC | 1 | |
| FMAG-MMC | FMAG-MMC;Adapter magnetic for MMC | 1 | |
| FMAG-MPO | FMAG-MPO;Adapter Magnetic for MPO | 1 | |
| FMAG-MPO-1 | FMAG-MPO-1;Adapter Magnetic for MPO Inverted Key | 1 | |
| FMAG-MT | FMAG-MT;Adapter Magnetic for MT Ferrule | 1 | |
| FMAG-OSFP | FMAG-OSFP;Adapter Magnetic for MT OSFP | 1 | |
| FMAG-QSFP | FMAG-QSFP;Adapter Magnetic for MT QSFP | 1 | |
| FMAG-SC | FMAG-SC;Adapter Magnetic for SC | 1 | |
| FMAG-TMT | FMAG-TMT;Adapter magnetic for TMT | 1 | |
| FMAG-U12 | FMAG-U12;Adapter Magnetic Universal 1.25mm | 1 | |
| FMAG-U25 | FMAG-U25;Adapter Magnetic Universal 2.5mm | 1 | |
| FMAX-AC951 | FMAX-AC951;AC951 Universal Clamshell Microscope Adapter Female Threaded | 1 | |
| FMAX-AC951A | FMAX-AC951A;AC951 Universal Clamshell APC Microscope Adapter Female Threaded | 1 | |
| FMAX-CA1 | FMAX-CA1;Coupling Adapter Converts FMA Adapters to FMAX | 1 | |
| FMAX-COD | FMAX-COD;OptiTap Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-COD-MTA-P | FMAX-COD-MTA-P;OptiTip and HFMOC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-COD-TH | FMAX-COD-TH;OptiTap Top-Half Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-CS | FMAX-CS;CS Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-CS-APC | FMAX-CS-APC;CS/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-CS-APC-SL35 | FMAX-CS-APC-SL35;CS/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-CS-SL35 | FMAX-CS-SL35;CS Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-DLX | FMAX-DLX;DLX Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-E2A | FMAX-E2A;E2000/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-IP16-SN | FMAX-IP16-SN;IP-16 Plug Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC | FMAX-LC;LC/PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-2X | FMAX-LC-2X;LC/PC 2X Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-2X-MINI | FMAX-LC-2X-MINI;LC/PC 2X mini Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-2X-SL35 | FMAX-LC-2X-SL35;LC/PC 2X Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LC-DUX | FMAX-LC-DUX;LC/PC Duplex Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-DUX-SL35 | FMAX-LC-DUX-SL35;LC/PC Duplex Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LC-SL35 | FMAX-LC-SL35;LC/PC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LCA | FMAX-LCA;LC/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LCA-DUX | FMAX-LCA-DUX;LC/APC Duplex Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LCA-DUX-SL35 | FMAX-LCA-DUX-SL35;LC/APC Duplex Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LCA-SL35 | FMAX-LCA-SL35;LC/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-MDC | FMAX-MDC;MDC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MDC-APC | FMAX-MDC-APC;MDC/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MDC-APC-JR | FMAX-MDC-APC-JR;MDC/APC Jr Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MDC-APC-SL35 | FMAX-MDC-APC-SL35;MDC/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-MDC-SL35 | FMAX-MDC-SL35;MDC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-MMCA | FMAX-MMCA;MMC SM Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MT | FMAX-MT;MT/PC Ferrule Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTA | FMAX-MTA;MT/APC Ferrule Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTP | FMAX-MTP;MTP Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTPA | FMAX-MTPA;MTP/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTPA-1 | FMAX-MTPA-1;MTP/APC Advanced Fiber Microscope Adapter Female Threaded Keyless | 1 | |
| FMAX-SC | FMAX-SC;SC/PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SC-DUX | FMAX-SC-DUX;SC/PC Duplex Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SC-DUX-SL30 | FMAX-SC-DUX-SL30;SC/PC Duplex Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SC-SL30 | FMAX-SC-SL30;SC/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SC2 | FMAX-SC2;SC2/PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SC2-SL30 | FMAX-SC2-SL30;SC2/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SCA | FMAX-SCA;SC/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SCA-SL30 | FMAX-SCA-SL30;SC/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SCA-SL41 | FMAX-SCA-SL41;SC/APC Adv Fiber Microscope Adapter Female 41-Degree Chamfer | 1 | |
| FMAX-SCA2 | FMAX-SCA2;SC2/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SCA2-SL30 | FMAX-SCA2-SL30;SC2/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SCA2-SL41 | FMAX-SCA2-SL41;SC2/APC Adv Fiber Microscope Adapter Female 41-Degree Chamfer | 1 | |
| FMAX-SN | FMAX-SN;SN Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-APC | FMAX-SN-APC;SN/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-APC-SL35 | FMAX-SN-APC-SL35;SN/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-SN-BTW1 | FMAX-SN-BTW1;SN-BTW1 Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-BTW1-SL35 | FMAX-SN-BTW1-SL35;SN-BTW1 Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-SN-BTW2 | FMAX-SN-BTW2;SN-BTW2 Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-BTW2-SL35 | FMAX-SN-BTW2-SL35;SN-BTW2 Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-SN-MTA | FMAX-SN-MTA;Universal SN-MTA Microscope Adapter Female | 1 | |
| FMAX-SN-SL35 | FMAX-SN-SL35;SN Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-TMTA | FMAX-TMTA;TMT/APC Advanced Fiber Microscope Adapter Female Threaded Keyless | 1 | |
| FMAX-U12 | FMAX-U12;Universal 1.25mm PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U12-SL35 | FMAX-U12-SL35;Universal 1.25mm PC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-U12A | FMAX-U12A;Universal 1.25mm APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U12A-SL35 | FMAX-U12A-SL35;Universal 1.25mm APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-U25 | FMAX-U25;Universal 2.5mm PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U25-SL30 | FMAX-U25-SL30;Universal 2.5mm PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-U25A | FMAX-U25A;Universal 2.5mm APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U25A-SL30 | FMAX-U25A-SL30;Universal 2.5mm APC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-U25A-SL41 | FMAX-U25A-SL41;Universal 2.5mm APC Adv Fiber Microscope Adapter Female 41-Degree Chamfer | 1 | |
| FORCECR-MO | ADAPTER FORCE CR-MO 80968MPB | 1 | |
| FP3-10 | ADAPTER CABLE 10-PIN ACTEL FP3-10 PIN ADAPTER-KIT | 1 | |
| FRDH 141 | ADAPTER-TORQUE | 12 | |
| FRDH101 | DRIVE TORQUE ADAPTER R 3/8 - 5/16 | 3 | |
| FRDH14 | ADAPTER-TORQUE | 1 | |
| FRDH141 | ADAPTER-TORQUE | 12 | |
| FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
| FRDH181 | TORQUE ADAPTER, 3/8" DRIVE, 12-POINT, 9/16" | 3 | |
| FRES10 | 3/8"DRIVE-5/16" TORQUE ADAPTER 2 EA | 4 | |
| FRES12 | 3/8"DRIVE-3/8" TORQUE ADAPTER 2 EA | 6 | |
| FRES14 | 3/8"DRIVE-7/16" TORQUE ADAPTER 2 EA | 6 | |
| FS0003 | Adapter- Fuel | 1 | |
| FS0005 | Adapter - Oil | 1 | |
| FS0006 | Adapter - Temp Sensor | 1 | |
| FS0007 | Adapter - Pressure Switch | 1 | |
| FS0008 | Adapter - Fuel Diverter Valve | 1 | |
| FST8168 | P-8 FUEL CONTROL ADAPTER SET / MFC: 50027 | 1 | |
| FTGCD4202 | STATIC ADAPTER FOR PN DMAK-A320X-E1K0P0V3 | 1 | |
| FTI-MB/LB-A1 | Puller Unit: MB-XX Mandrel Adapter - Allows LB Mandrel and Nosecap to attach to MB Puller Unit | 1 | |
| FXT-13305 | INTERFACE TEST ADAPTER (ITA) (FXT-13305) | 1 | |
| G07005-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS IV AND V | 5 | |
| G07006-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS VII AND VIII | 1 | |
| G07009-1 | JACKING ADAPTER RECOVERY EQUIPMENT - AFT INBOARD AND OUTBOARD DIAGONAL BRACE | 1 | |
| G07015-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 583 | 1 | |
| G1003210001-001 | ADAPTER - NLG SERVICING | 4 | |
| G20014-1 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 2 | |
| G21008-1 | ADAPTER EQUIPMENT - AIR CYCLE MACHINE (CE) | 2 | |
| G21009-1 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM (CE) | 1 | |
| G21009-40 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM (CE) | 2 | |
| G21009-57 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM (CE) | 1 | |
| G21009-64 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 2 | |
| G21009-65 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 3 | |
| G21010-1 | ADAPTER - CONDENSER, COMPACT MIXER, WATER EXTRACTOR, REMOVAL/INSTALLATION, AIR CONDITIONING PACK (CE) | 1 | |
| G21012-1 | ADAPTER - REHEATER REMOVAL AND INSTALLATION, AIR CONDITIONING PACK (CE) | 2 | |
| G24012 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 2 | |
| G24012-1 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (CE) | 11 | |
| G24013-1 | ACCESSORY ADAPTER - HOIST SYSTEM RB211 AND CF6-50 ENGINES | 1 | |
| G26001-16 | ADAPTER CABLE - TEST EQUIP | 1 | |
| G26001-162 | ADAPTER CABLE - TEST EQUIP, FIRE EXT SYS | 4 | |
| G26001-163 | ADAPTER CABLE - TEST EQUIPMENT, | 4 | |
| G26001-165 | ADAPTER CABLE - TEST EQUIPMENT, | 4 | |
| G26001-166 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 4 | |
| G26001-167 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 3 | |
| G26001-69 | ADAPTER CABLE - TEST EQUIPMENT, | 2 | |
| G26001-70 | ADAPTER CABLE - TEST EQUIPMENT, | 3 | |
| G26001-71 | CABLE ASSY ADAPTER FOR G26001-105 | 3 | |
| G26001-72 | ADAPTER CABLE - TEST EQUIPMENT, | 6 | |
| G26001-73 | ADAPTER CABLE - TEST EQUIPMENT, | 3 | |
| G26001-74 | ADAPTER CABLE-TEST EQUIPMENT FIRE EXTINGUSHING SYS | 3 | |
| G26001-91 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 2 | |
| G26003-17 | ADAPTER-ANEMOMETER HOT WIRE | 1 | |
| G26005-13 | ADAPTER - HOT WIRE ANEMOMETER | 1 | |
| G26005-17 | ADAPTER - HOT WIRE ANEMOMETER | 5 | |
| G26005-17-M | ADAPTER-HOT WIRE | 1 | |
| G26005-24 | ADAPTER - HOT WIRE ANEMOMETER | 11 | |
| G26005-9 | ADAPTER - HOT WIRE ANEMOMETER | 3 | |
| G26009-91 | 1-1/4"TUBE ADAPTER ASSY | 1 | |
| G27011 | SPLINE ADAPTER -0 TORQUE SENSOR, INBD & OUTBD TE | 1 | |
| G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| G27020 | SPLINE ADAPTER -0 OUTBD XMSN, INBD T.E. FLAP | 1 | |
| G27020-1 | SPLINE ADAPTER - OUTBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27030 | TORQUE ADAPTER -0 HORIZONTAL STABILIZER ACTUATOR | 1 | |
| G27030-1 | TORQUE ADAPTER - HORIZONTAL STABILIZER ACTUATOR | 8 | |
| G27033-1 | ADAPTER CABLE - OUTBOARD AILERON LOCKOUT | 1 | |
| G27033-2 | ADAPTER CABLE - OUTBOARD AILERON LOCKOUT | 7 | |
| G27034 | SPLINE ADAPTER -0 ANGLE GEARBOX DRIVE, INBD TE | 1 | |
| G27034-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 1 | |
| G27046-3 | ADAPTER ASSEMBLY (G27046-3 INCLUDED IN G27046-119 & -138) | 1 | |
| G27046-4 | ADAPTER ASSEMBLY (G27046-4 INCLUDED IN G27046-119 & -138) | 1 | |
| G27046-5 | ADAPTER ASSEMBLY (G27046-5 INCLUDED IN G27046-119 &-138) | 1 | |
| G27046-6 | ADAPTER ASSEMBLY (G27046-6 INCLUDED IN G27046-119 & -138) | 1 | |
| G27055-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP (CE) | 2 | |
| G27056-1 | HOIST ADAPTER - POWER DRIVE UNIT, OUTBOARD TRAILING EDGE FLAP (CE) | 3 | |
| G27064-31 | ADAPTER - TRAILING EDGE FLAP ACTUATOR, REMOVAL/INSTALLATION (CE) | 5 | |
| G27082-1 | Torque Adapter - Flap Track Installation | 1 | |
| G27082-12 | TORQUE ADAPTER - FLAP TRACK INSTALLATION | 1 | |
| G27090 | REM/INSTL ADAPTER-INBOARD ELEVATOR ACTUATOR | 1 | |
| G27090-1 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 2 | |
| G27090-54 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 1 | |
| G27091-1 | SPLINE ADAPTERS - ANGLE GEARBOX DRIVE, INBOARD AND OUTBOARD TRAILING EDGE FLAPS | 5 | |
| G27094-1 | SPLINE ADAPTERS - SUPPORT ASSEMBLY, TORQUE TUBE | 1 | |
| G27094-4 | SPLINE ADAPTER - SUPPORT ASSY, TORQUE TUBE | 1 | |
| G28006 | ADAPTER EQUIPMENT -0 CALIBRATION, FUEL QUANTITY | 1 | |
| G28006-1 | ADAPTER EQUIPMENT - CALIBRATION, FUEL QUANTITY TOTALIZER | 1 | |
| G28008 | TEST ADAPTER EQPT -0 FUEL LINE PRESSURE | 1 | |
| G28008-1 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | 1 | |
| G28008-2 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | 1 | |
| G28008-4 | Test Adapter Assy - Fuel Line Pressure | 1 | |
| G28014-1 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VALVES | 9 | |
| G28014-15 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VALVE | 3 | |
| G28018-28 | ADAPTER - TEST | 12 | |
| G28018-7 | ADAPTER - FITTING AS | 6 | |
| G28035-1 | ADAPTER EQUIPMENT - BOOST AND JETTISON PUMPS | 2 | |
| G28035-2 | ADAPTER EQUIPMENT - BOOST AND JETTISON PUMPS | 2 | |
| G29001 | TEST ADAPTER -0 PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29001-1 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29001-2 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29007-3 | Adapter assy（747-400） | 1 | |
| G29007-4 | Adapter assy（747-8） | 1 | |
| G29014-1 | RETURN & PRESSURE EXTENSION ADAPTER - GROUND SERVICE DISCONNECT | 8 | |
| G32011 | WRENCH ADAPTER -0 OVERSIZE GLAND NUT, WING, AND | 1 | |
| G32011-1 | WRENCH ADAPTER - OVERSIZE GLAND NUT, WING AND BODY GEAR | 6 | |
| G32037 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 1 | |
| G32060-1 | Torque adapter-rod end，body landing gear，hydraulic actuator | 2 | |
| G32075-16 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM GAUGE SET | 9 | |
| G52009 | TEST ADAPTER-ACTUATOR ACCESS DOOR LATCH | 1 | |
| G54008-19 | ADAPTER - FOR REML/INSTL | 1 | |
| G54014 | ADAPTER -0 PIVOT BOLT, SPRING BEAM | 1 | |
| G54014-1 | ADAPTER - PIVOT BOLT, SPRING BEAM | 2 | |
| G57012-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 4 | |
| G5M5M0-116-0000 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 1 | |
| G600-120001-1 | KIT-NITROGEN CHARGINE ADAPTER | 5 | |
| G600-270052-1 | Adapter - Torque Check | 5 | |
| G600-280001-1 | Adapter Assembly - Gravity Defueling | 5 | |
| G600-280001-20 | Adapter Assembly - Gravity Defueling | 1 | |
| G600-280001−1 | ADAPTER ASSY -GRAVITY | 5 | |
| G600-290002-1 | ADAPTER (CL605 SN. 5856 VP-CVV) | 3 | |
| G600-290002???1 | KIT - SAMPLING ADAPTER | 3 | |
| G600-290002−1 | KIT - SAMPLING ADAPTER | 3 | |
| G600-340001-1 | Adapter - Adf Antenna Bonding Test | 1 | |
| G600-360001-37 | Kit - Shop Air Adapter | 1 | |
| G600-520001-1 | Adapter - Torque Wrench Baggage Door Handle | 1 | |
| G600-524101-1 | Torque Wrench Adapter - Equipment Bay Door Handle | 1 | |
| G600−120001−1 | KIT - NITROGEN CHARGING ADAPTER | 5 | |
| G600−280001−1 | ADAPTER ASSY -GRAVITY | 5 | |
| G600−520001–1 | ADAPTER - BAGGAGE DOOR HANDLE TORQUE WRENCH | 1 | |
| G601-360002-41 | Kit - Inlet Adapters (14Th Stage) | 1 | |
| G601-710008-157 | SLING, ENGINE/POWERPLANT (INCLUDE ADAPTER 932-200) | 5 | |
| G601-710008-163 | ADAPTER-LIFTING ENGINE SLING | 1 | |
| G601-710008-401 | ADAPTER LIFTING ENGINE SLING (932-200) | 2 | |
| G601-710008−163 | ADAPTER-LIFTING ENGINE SLING | 1 | |
| G601-710011-1 | ADAPTER - THRUST MOUNT | 2 | |
| G601R102002-1 | Adapter Kit - Mooring | 1 | |
| G601R121611-1 | Adapter Kit - Nitrogen Charging | 5 | |
| G601R121801-29 | Adapter - Potable Water Supply | 5 | |
| G601R282601-1 | ADAPTER - GRAVITY DEFUELING | 5 | |
| G601R291004-25 | KIT - SAMPLING ADAPTER | 5 | |
| G601R321102-1 | WRENCH ADAPTER - MLG PINTLE PIN NUT | 6 | |
| G601R361201-1 | KIT - INLET ADAPTER 14TH STAGE | 1 | |
| G601R361301-1 | KIT - 10TH STAGE SHOP AIR ADAPTER | 2 | |
| G601R521104-1 | Torque Adapter - Passenger And Baggage Door Handle | 7 | |
| G601R521104−1 | ADAPTER - CABIN DOOR TORQUE | 7 | |
| G601R521118-1 | ADAPTER - PASSENGER DOOR EXTERNAL HANDLE | 4 | |
| G601R522201-1 | TORQUE ADAPTER - PILOT HATCH HANDLE INSIDE | 4 | |
| G601R522202-1 | Torque Adapter - Pilot?S Hatch Handle (Outside) | 6 | |
| G601R783003-1 | ADAPTER - BLEED AIR THRUST REVERSER ACTIVATION | 1 | |
| G604-281203-1 | Kit - Fuel Shroud Drain Adapter | 4 | |
| G604-783015-1 | Adapter - Bleed Air Thrust Reverser | 1 | |
| G670-281102-1 | ADAPTER - FUEL TANK VENTING | 3 | |
| G670-281102−1 | ADAPTER - FUEL TANK VENTING | 3 | |
| G670281102-1 | ADAPTER - FUEL TANK VENTING | 3 | |
| G670281103-1 | Adapter - Inboard Fuel Tank Venting | 3 | |
| G670301106-1 | ADAPTER - COWL ANTI-ICE DUCT | 4 | |
| G700-121205-1 | Adapter - Nlg Servicing | 4 | |
| G700-521108-1 | Kit - Cabin Door Torque Adapter | 2 | |
| G700050127 | G700050127;OneAdvisor-800 AC/DC Power Adapter 160 W 19 V | 1 | |
| G700050571 | G700050571;Adapter Type-N M to DIN F_DC to 7.5 GHz_50 Ohm | 1 | |
| G700050573 | G700050573;Adapter Type-N M to SMA F DC to 18 GHz_50 Ohm | 1 | |
| G700050574 | G700050574;Adapter Type-N M to BNC F_DC to 4 GHz_50 Ohm | 1 | |
| G700050575 | G700050575;Adapter Type-N F to Type-N F_DC to 18 GHz_50 Ohm | 1 | |
| G700050576 | G700050576;Adapter Type-N M to DIN M_DC to7.5 GHz_50 Ohm | 1 | |
| G700050577 | G700050577;Adapter Type-N F to DIN F_DC to 7.5 GHz_50 Ohm | 1 | |
| G700050578 | G700050578;Adapter Type-N F to DIN M_DC to 7.5 GHz_50 Ohm | 1 | |
| G700050580 | G700050580;Adapter Type-N M to Type-N M_DC to 11 GHz 50 Ohm | 1 | |
| G700050585 | G700050585;Adapter N m to 4.3-10 f; DC to 6.0 GHz; 50 ohm | 1 | |
| G700050586 | G700050586;Adapter N m to 4.3-10 m; DC to 6.0 GHz; 50 ohm | 1 | |
| G700−121205−1 | ADAPTER - NLG SERVICING | 4 | |
| G71024 | ADAPTER EQUIPMENT -0 FAN THRUST REVERSER | 1 | |
| G71024-1 | ADAPTER EQUIPMENT - FAN THRUST REVERSER ACTUATOR BACKLASH TEST, JT9D ENGINE | 1 | |
| G71039-1 | Proof Load Fixture Adapter -Bootstrap Equipment | 1 | |
| G71039-44 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 1 | |
| G76002-19 | Adapter - Protractor - Thrust Reverser Levers, Digital Readout | 14 | |
| G77002 | ADAPTER -0 PT2 PROBE, EPR SYSTEM LEAK TEST | 1 | |
| G77002-1 | ADAPTER - Pt2 PROBE, ENGINE PRESSURE RATIO (EPR) SYSTEM LEAK TEST | 1 | |
| G78005 | ADAPTER-THRUST REVERSER HOLD OPEN ROD | 1 | |
| G78005-10 | ADAPTER - THRUST REVERSER HOLD OPEN ROD | 9 | |
| G83-1700AB | ADAPTER FOR 99-3714 | 1 | |
| GA-2 | ADAPTER - GAGE P39 PUMP | 2 | |
| GAF2A | ADAPTER 3/8 - 1/2 | 3 | |
| GB455-002-000 | 5/16"-32 ADAPTER | 1 | |
| GBO30-010-300 | ADAPTER-FOR LOADCELL | 1 | |
| GFAT1E | ADAPTER 1/4 / ADAPTER 3/8-1/4 | 4 | |
| GFATIE | ADAPTER SOCKET 1/4-3/8 | 1 | |
| GG0570003-003 | PADS-JACKING, ADAPTER ASSY WING/FUSE | 1 | |
| GLA124A | ADAPTER 1"-3/4 | 5 | |
| GLA12B | ADAPTER 1/2 - 3/4 | 5 | |
| GLA72A | SnapOn 3/4- 1" Drive Ind Finish Socket Extension Adapter | 4 | |
| GNSSRK | REPEATER KIT; INCLUDES GA30-V AMPLIFIER MODULE, S440 GNSS ANTENNA, N-JK-G ARRESTER, GRA10-NF INDOOR ANTENNA, LMR/KSR240 L=20MTR (NM-NM) INDOOR CABLE SET, RG8 L=30MTR (NM-TM) OUTDOOR CABLE SET, OUTDOOR ANTENNA MOUNTING STAND AND POWER ADAPTER MANUFACTURER: | 1 | |
| GP000973 | ADAPTER-TORQUE WRENCH VALVE TO CYLINDER | 1 | |
| GRAY4215 | ADAPTER 3/8- 1/2 | 1 | |
| GS10258 | ADAPTER-DOME TEST | 1 | |
| GS10357 | ADAPTER-SUMP ANNULUS LINE | 1 | |
| GS10767 | ADAPTER-TORQUE WRENCH | 1 | |
| GS10767-1 | ADAPTER - TORQUE WRENCH | 1 | |
| GS11839-1 | ADAPTER PRESSURE PICK-UP | 1 | |
| GS11865 | PULLER - SHAFT ADAPTER | 1 | |
| GS11881 | ADAPTER - MAIN AND SCAVENGE PUMP TEST | 1 | |
| GS11882 | ADAPTER - SCAVENGE PUMP OUTLET PORT TEST PLUG | 1 | |
| GS13237-1 | ADAPTER-ACM FLOW CONTROL VALVE | 4 | |
| GS15047-1 | ADAPTER TEST PRESS RELIEF (+tlakomer -30 inHg) | 13 | |
| GS15194-1 | ADAPTER - TORQUE WRENCH | 1 | |
| GS15995-1 | Adapter - Torque Wrench | 2 | |
| GS18283-1 | TRI-WING ADAPTER | 6 | |
| GS18298-1 | WITH GS18300-1 ADAPTER KIT DURING PROPELLER BALANCING | 6 | |
| GS19518-1 | ADAPTER, HYDRAULIC TEST-C-130 | 1 | |
| GS20782-1 | ADAPTER - TORQUE WRENCH | 12 | |
| GS20931-1 | Two-Way Solenoid Torque Adapter | 2 | |
| GS20932-1 | Three-Way Solenoid Torque Adapter | 2 | |
| GS20965-1 | ADAPTER-TRANSPORT PROPELE | 5 | |
| GS23424-1 | PROPELLER FLANGE-ADAPTER | 3 | |
| GS26802-1 | TORQUE ADAPTER - BALANCE NUT | 2 | |
| GS9400-5 | TESTER - FLOW CONTROL AND SHUTOFF VALVE. REQUIRES TWO ADAPTERS FOR FLOW CONTROL VALVE | 1 | |
| GSAF1F | ADAPTER 1/2 INT - 3/8 EXT DR | 4 | |
| GSB0700007 | ADAPTER-JACK | 5 | |
| GSB0700017 | ADAPTER - JACK, WING | 2 | |
| GSB0800002 | KIT-NOSE AND MAIN WHEEL MEASURING ADAPTER | 1 | |
| GSB0800003 | ADAPTER-MAIN WHEEL MEASURING | 4 | |
| GSB1210012 | KIT-OXYGEN CHARGING ADAPTER | 2 | |
| GSB2750001 | ADAPTER-RIGHT ANGLE DRIVE | 1 | |
| GSB2840002 | ADAPTER CABLE SET FOR D8-400 FUEL QUANTITY TEST | 1 | |
| GSB2840008A | ADAPTER CABLE SET FOR D8-400 FUEL QTY TEST | 1 | |
| GSB2840008B | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, EXTENDED RANGE | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSB2840008D | SET - HARNESS ADAPTER Q100, 200, 300, IMPERIAL, EXTENDED RANGE | 1 | |
| GSB3242004 | SPIN-UP ADAPTER | 4 | |
| GSB3242005 | ADAPTER-BRAKE (ANTI-SKID TESTER) | 1 | |
| GSB3411009 | KIT-PITOT STATIC TEST ADAPTER | 3 | |
| GSB3411012 | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
| GSB3411013 | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
| GSE 279 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 1 | |
| GSE 464 | ADAPTER LEFT-HAND | 1 | |
| GSE 465 | ADAPTER RIGHT-HAND, ASSY. | 1 | |
| GSE 52X-11-08 | KIT - CABIN DOOR TORQUE ADAPTER | 1 | |
| GSE 530 | ADAPTER - OXYGEN CHARGING | 1 | |
| GSE-064 | ADAPTER-FLAP FLEXIBLE SHAFT | 1 | |
| GSE017 | ADAPTER,JACKING-WING | 1 | |
| GSE0700033 | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| GSE0700486 | JACK PAD ADAPTER- | 1 | |
| GSE1200192 | BLEEDER ADAPTER-GSE1200192 | 1 | |
| GSE148 | ADAPTER - TORQUE, WING | 1 | |
| GSE158 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 1 | |
| GSE159 | TOOL - SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | 1 | |
| GSE164 | ADAPTER-LIFTING ENGINE ASSY P/N23055299 | 1 | |
| GSE168 | ADAPTER-AFT ENGINEHANDLING P/N 23055758 | 1 | |
| GSE169 | ADAPTER-AFT ENGINELIFTING P/N 23055759 | 1 | |
| GSE234 | SPLINE ADAPTER - TORQUE TUBE | 1 | |
| GSE464 | ADAPTER LEFT-HAND | 1 | |
| GSE465 | ADAPTER RIGHT-HAND, ASSY. | 1 | |
| GSE7220780 | VSV TORQUE ADAPTER/BAV-PIN KIT | 1 | |
| GSRS15-16 | ADAPTER - TORQUE WRENCH RUDDER PCU INSTA | 4 | |
| GUC232A | USB ADAPTER TO SERIES RS-232 | 1 | |
| H207294-1 | ADAPTER - FUEL | 1 | |
| H207295-1 | ADAPTER - FUEL | 1 | |
| H207423-1 | ADAPTER - OIL | 1 | |
| H207425-1 | ADAPTER - FUEL PRESSURE TRANSDUCER | 1 | |
| H207427-1 | ADAPTER - OIL PRESSURE TRANSDUCER | 1 | |
| H207428-1 | ADAPTER - FUEL RETURN PORT | 1 | |
| H207454-1 | ADAPTER - OIL | 1 | |
| H21969 | ADAPTER- CHG NLG SH ABS | 11 | |
| H21969-1 | TOOL-NLG SERVICE WITH ADAPTER | 3 | |
| H294 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 3 | |
| H394-115 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 2 | |
| H394R | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 8 | |
| H46828 | ADAPTER-NLG WHL AXLE | 19 | |
| H46838 | ADAPTER-MLG WHL AXLE NUT | 14 | |
| H47026 | NLG CHARGE ADAPTER - HAND LEVER | 4 | |
| H47682 | ADAPTER - MLG A321 | 43 | |
| HA1601-005 | ADAPTER WITH GAGE 0-25BAR, INFLATION OF PRESSURE | 1 | |
| HC130H0014-000 | ADAPTER-TORQUE LOADING | 1 | |
| HC130H0029-000 | ADAPTER-TORQUE(MLG) | 1 | |
| HC130H0071-000 | TORQUE ADAPTER - PYLON FRONT BOLTS | 1 | |
| HC132H0006-000 | JACKING ADAPTER-MAIN | 4 | |
| HC132H0060-000 | JACKING ADAPTER-NOSE WHEEL | 3 | |
| HCU200-AC-ADPTR-BRICK | HCU200-AC-ADPTR-BRICK;OPT HCU200 AC POWER ADAPTER BRICK FORM | 1 | |
| HCU200-FULL-BNC | HCU200-FULL-BNC;HCU200BNC with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-BNC-ENC | HCU200-FULL-BNC-ENC;Encore HUC200BNC with Full Mactrak and AC Adapter | 1 | |
| HCU200-FULL-F | HCU200-FULL-F;HCU200F with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-F-ENC | HCU200-FULL-F-ENC;Encore HUC200F with Full Mactrak and AC Adapter | 1 | |
| HE50844Z53 | KEY - ADAPTER BAR | 1 | |
| HE50844Z54 | ELEMENT KEY - ADAPTER | 1 | |
| HGPU50-30-1S | HYDRAULIC GROUND POWER UNIT WITH : -OPTION- H; - OPTION-S; -ACCESSORY- 04 ; - ADAPTER HOSE KIT-B737 CLASSIC. | 2 | |
| HLA1645 | NATO M Adapter - BNAE DN8 F | 1 | |
| HLA1646 | NATO F Adapter - BNAE DN8 M | 1 | |
| HLA4301 | BNAE DN8 M Adapter - AN-4 M | 1 | |
| HLA4302 | NATO M Adapter - MS33514-4 M | 1 | |
| HLA4303 | NATO M Adapter - AN4 M | 1 | |
| HLA4304 | BNAE DN8 M Adapter - Type C | 1 | |
| HLA4305 | NATO F Adapter - AN4 M | 1 | |
| HLA4677 | Pump Adapter G3/8" M - BNAE DN8 M | 1 | |
| HLA5177 | BNAE DN8 M Adapter - MS33514-4 M | 1 | |
| HLA6166 | NATO F Adapter - 1/8" NPT M | 1 | |
| HLA6274 | NATO F Adapter - G1/4" M | 1 | |
| HLA6275 | NATO M Adapter - G1/4" M CYL | 1 | |
| HLA6413-3/3 | Elbow Adapter for Bleeding Boeing Brakes AN4 M - 3/16-32BSF | 1 | |
| HLA6458 | Straight Adapter for Bleeding Boeing Brakes AN4 M - 3/16-32BSF | 1 | |
| HLA6585 | Straight Adapter for Bleeding NATO Brakes M - 3/16-32BSF | 1 | |
| HM0917275 | ADAPTER-R/1,DRAGBRACE,MLG | 1 | |
| HOA-6L | ADAPTER-OFFSET | 1 | |
| HOV4650211 | ADAPTER - CHARGING SHOCK STRUTS | 1 | |
| HP-6000-1 | H150 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
| HP-6000-10 | H150 LIFT ADAPTER - B47 - STD GEAR | 1 | |
| HP-6000-11 | H250 LIFT ADAPTER - B204/AH-1 | 1 | |
| HP-6000-12 | H200/250 LIFT ADAPTER - H135/EC135 - LOW GEAR | 1 | |
| HP-6000-13 | H200/250 LIFT ADAPTER - H135/EC135 - HIGH GEAR | 1 | |
| HP-6000-14 | H150 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
| HP-6000-15 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR | 1 | |
| HP-6000-16 | H250 LIFT ADAPTER - MD900 | 1 | |
| HP-6000-17 | H200/250 LIFT ADAPTER - B427 - LOW GEAR W/O CABLE CUTTERS | 1 | |
| HP-6000-18 | H200/250 LIFT ADAPTER - B427 - HIGH GEAR | 1 | |
| HP-6000-19 | H200/250 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
| HP-6000-2 | H150 LIFT ADAPTER - B206A/B - LOW GEAR | 1 | |
| HP-6000-20 | H250 LIFT ADAPTER - B430 | 1 | |
| HP-6000-21 | H150 LIFT ADAPTER - H125/AS350 - HIGH GEAR | 1 | |
| HP-6000-22 | H150 LIFT ADAPTER - H125/AS350 - LOW GEAR | 1 | |
| HP-6000-24 | H250 LIFT ADAPTER - BO105 | 1 | |
| HP-6000-25 | H250 LIFT ADAPTER - BK117 | 1 | |
| HP-6000-26 | H200/250 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
| HP-6000-27 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - LOW GEAR | 1 | |
| HP-6000-28 | H150/200/250 LIFT ADAPTER - OH-58 - HIGH GEAR | 1 | |
| HP-6000-29 | H150 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
| HP-6000-3 | H150/200/250 LIFT ADAPTER - B206L - FLOAT COMP. | 1 | |
| HP-6000-31 | H200/250 LIFT ADAPTER - H120/EC120 | 1 | |
| HP-6000-32 | LIFT ADAPTER R-44 | 1 | |
| HP-6000-33 | LIFT ADAPTER R-22, H100 | 1 | |
| HP-6000-36 | H150 LIFT ADAPTER - OH-58 - LOW GEAR | 1 | |
| HP-6000-37 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - HIGH GEAR | 1 | |
| HP-6000-38 | LIFT ADAPTER R-22 | 1 | |
| HP-6000-39 | H150 LIFT ADAPTER - AIRPLANE MOD. | 1 | |
| HP-6000-4 | H150 LIFT ADAPTER - B206B - FLOAT COMP. | 1 | |
| HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
| HP-6000-41 | H250 LIFT ADAPTER - UH-1H - LOW GEAR | 1 | |
| HP-6000-42 | H250 LIFT ADAPTER - AW119 | 1 | |
| HP-6000-44 | H250 LIFT ADAPTER - UH-1H - HIGH GEAR | 1 | |
| HP-6000-47 | H250 LIFT ADAPTER - H145/EC145 | 1 | |
| HP-6000-48 | H200/250 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
| HP-6000-49 | H150 LIFT ADAPTER - ENSTROM F-28 | 1 | |
| HP-6000-50 | H150 LIFT ADAPTER - ENSTROM F-480 | 1 | |
| HP-6000-56 | H250 LIFT ADAPTER - AH-1 | 1 | |
| HP-6000-58D | H200 LIFT ADAPTER - OH-58D - HIGH GEAR | 1 | |
| HP-6000-61 | H150 LIFT ADAPTER - B47 - HIGH GEAR | 1 | |
| HP-6000-62 | H200/250 LIFT ADAPTER - H135/EC135 - MID GEAR (METRO) | 1 | |
| HP-6000-63 | H250 LIFT ADAPTER - UH-72 LAKOTA | 1 | |
| HP-6000-68 | H200/250 LIFT ADAPTER - B206B - FLOAT COMP. | 1 | |
| HP-6000-69 | H150 LIFT ADAPTER - SCHWEIZER S269/300 | 1 | |
| HP-6000-7 | H250 LIFT ADAPTER - B222/230 | 1 | |
| HP-6000-70 | H150 LIFT ADAPTER - R22 | 1 | |
| HP-6000-71 | H150 LIFT ADAPTER - R44 | 1 | |
| HP-6000-72 | LIFT ADAPTER MQ-8C | 1 | |
| HP-6000-74 | H200/250 LIFT ADAPTER - H130/EC130 | 1 | |
| HP-6000-75 | H150 LIFT ADAPTER - B505 - STD GEAR | 1 | |
| HP-6000-78 | H150 LIFT ADAPTER - B505 - HIGH GEAR | 1 | |
| HP-6000-8 | H250 LIFT ADAPTER - B212/412 | 1 | |
| HS1009KD | ADAPTER JACK - SAFETY JACKING // TAIL JACK (ØA = 24.5) | 1 | |
| HS7168 | ADAPTER-PORT | 1 | |
| HS7605 | ADAPTER - TEST, HYDRAULIC | 1 | |
| HS7625 | ADAPTER-DRAIN, TEST FIXTURE | 1 | |
| HS8238 | ADAPTER - PORT | 1 | |
| HS8544 | ADAPTER - HYDRAULIC TEST | 1 | |
| HS8545 | ADAPTER - HYDRAULIC TEST | 1 | |
| HS9000 | ADAPTER - TORQUE WRENCH | 2 | |
| HS9234 | ADAPTER-MOUNTING ACTUA | 1 | |
| HS9577 | ADAPTER-HYDRAULIC | 1 | |
| HS9585 | ADAPTER-TORQUE WRENCH | 1 | |
| HS9830 | ADAPTER - CONTROL FLUSHING | 2 | |
| HS9836 | ADAPTER - PLATE | 1 | |
| HSA1063 | UNI-TABS, WELDING ADAPTER | 1 | |
| HSE757-0010-7 | SLING WINGLET - ADAPTER PLUG HOIST | 2 | |
| HU 55761 | ADAPTER - BOOTSTRAP | 14 | |
| HU-5 | ENGINE STAND ADAPTER - RB211 | 1 | |
| HU21570 | ADAPTER - FRONT BEARING HOUSING AND LOW PRESSURE BEARING FEED | 1 | |
| HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | 1 | |
| HU22699 | ADAPTER - BEARING, L.P. TURBINE | 1 | |
| HU28499 | EXTRACTOR - ADAPTER | 3 | |
| HU28707 | End-drive adapter | 1 | |
| HU28783-2 | Adapter - Fan Hub to Sling Frame - RB211-535E4 Engine | 1 | |
| HU29623 | ADAPTER-INHIBITING PUMP CART, ENGINE FUEL SYSTEM RB211-535 ENGINES | 1 | |
| HU31811 | ADAPTER-INHIBITING PUMP CART, ENGINE FUEL SYSTEM RB211-535 ENGINES | 2 | |
| HU32563 | ADAPTER - LIFTING, LP COMPRESSOR DISC | 1 | |
| HU35451 | ADAPTER- EXTRACTOR NOSE SPINNER | 9 | |
| HU37594 | ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 14 | |
| HU39652 | Extractor - Adapter | 6 | |
| HU40025 | ADAPTER - ROTATE HP SYSTEM, BREATHER ROTOR | 15 | |
| HU41100 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | 1 | |
| HU41384 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | 1 | |
| HU41791 | ADAPTER, CONNECTOR - INHIBITING FUEL SYSTEM | 1 | |
| HU44807 | ADAPTER-LIFTING SLING | 1 | |
| HU44819 | EXTRACTOR ADAPTER-SLIDER ASSEMBLY FROM FAN DISC | 9 | |
| HU50307 | ADAPTER - EXTRACTOR | 2 | |
| HU50307-1 | Extractor - Adapter, VSV Actuator | 1 | |
| HU50397-1 | ADAPTER - REM.INST LP COMPRESSOR DISK, BLADES | 1 | |
| HU50458 | ADAPTER - EXTRACT | 1 | |
| HU51166 | ADAPTER, EXTRACTOR - BORESCOPE PLUGS HP & IP COMPRESSOR | 5 | |
| HU55072-1 | ADAPTER-LIFT | 1 | |
| HU55073-1 | ADAPTER-FANCASE | 1 | |
| HU55076 | ADAPTER-R/I PNEUMATIC STARTER | 4 | |
| HU55177 | ADAPTER-TROLLEY RI IDG | 1 | |
| HU55178 | ADAPTER, REM.-INST. PNEUMATIC STARTER | 1 | |
| HU55178-2 | ADAPTER-R I PNEUMATIC STARTER | 4 | |
| HU55178-3 | ADAPTER-R I PNEUMATIC STARTER | 6 | |
| HU55181 | SPRUNG ADAPTER-R I EXTERNAL GEARBOX MODU | 1 | |
| HU55181-1 | SPRUNG ADAPTER-R I EXTERNAL GEARBOX MODULE | 6 | |
| HU55183 | PLATE, ADAPTER - R I PNEUMATIC STARTER | 1 | |
| HU55330 | ADAPTER-R I PNEUMATIC STARTER | 1 | |
| HU55330-1 | ADAPTER-R I PNEUMATIC STARTER | 8 | |
| HU55338-1 | ADAPTER - FAN & NOSE COWL STAND | 1 | |
| HU55368-3 | KIT-ADAPTER,REMOTE STATION RESCUE | 2 | |
| HU55384 | ADAPTER-FAN CASE NOSE COWL | 1 | |
| HU55436 | Adapter - Trolley, Install/Remove IDG | 1 | |
| HU55436-2 | ADAPTER-TROLLEY RI IDG | 11 | |
| HU55437-2 | ADAPTER-R I FUEL PUMP | 10 | |
| HU55676 | ADAPTER - ENGINE BUILD STAND, INTERMEDIATE CASE (STARBOARD SIDE) | 4 | |
| HU55677 | ADAPTER - ENGINE BUILD STAND, INTERMEDIATE CASE (PORT SIDE) | 4 | |
| HU55690 | ADAPTER-R I PNEUMATIC STARTER | 1 | |
| HU55736 | ADAPTER-TROLLEY R/I IDG | 1 | |
| HU55736-1 | ADAPTER-TROLLEY R I IDG | 3 | |
| HU55761 | ADAPTER - BOOTSTRAP | 14 | |
| HU55989 | PLATE ADAPTER - R I GEARBOX UNITS | 5 | |
| HU55990 | ADAPTER-POSITIONER R I FUEL PUMP | 2 | |
| HU56215 | ADAPTER-FIXTURE ON GEARBOX TROLLEY | 1 | |
| HU56216 | ADAPTER-TROLLEY JACK | 1 | |
| HU56216-2 | ADAPTER-TROLLEY JACK | 1 | |
| HU56217 | ADAPTER-JACK | 1 | |
| HU56217-1 | ADAPTER-JACK | 1 | |
| HU56522 | ADAPTER, LIFTING - FAN | 1 | |
| HU80277 | ADAPTER - ENGINE FUEL SYSTEM | 7 | |
| HU80280 | ADAPTER - FOR LP FUEL INLET PIPE | 2 | |
| HU80281 | ADAPTER - AMERICAN THREAD 777-200ER, -300 | 3 | |
| HU80617-2 | ADAPTER-R/I LP COMPRESSOR DISK/BLADES | 1 | |
| HX292A | ADAPTER-WAVEGUIDE | 1 | |
| I-580-90 | ADAPTER-90 ANGLE VIEWING_[I-580-90] | 1 | |
| IAE1F10023 | ADAPTER HANDLING-GEARBOX | 8 | |
| IAE1F10039 | ADAPTER, ANTI-TORQUE | 1 | |
| IAE1J12000 | Engine Attach Adapter - Lifting Bracket | 10 | |
| IAE1J12007 | ADAPTER,SLING-ENGINE ASSY | 10 | |
| IAE1J12018 | ADAPTER-WRENCH SPECIAL | 6 | |
| IAE1J12104 | ADAPTER-SLING | 7 | |
| IAE1J12303 | ADAPTER, HANDLING - ENGINE ASSY, DISK STG. 1.5-2.5 LPC ROTOR | 1 | |
| IAE1N20012 | ADAPTER-TORQUE TOOL | 13 | |
| IAE1N20023 | ADAPTER-TORQUE TOOL | 17 | |
| IAE1N20023 (ALT : RSE1234) | ADAPTER-TORQUE TOOL | 1 | |
| IAE1N20023_AAR | ADAPTER-TORQUE TOOL | 1 | |
| IAE1N20036 | TORQUE ADAPTER; MD-90 | 1 | |
| IAE1N20054 | TORQUE ADAPTER;MD-90 | 4 | |
| IAE1N20417 | ADAPTER - PRESSURIZING. | 1 | |
| IAE1N20418 | ADAPTER - BLANKING | 1 | |
| IAE1N20419 | ADAPTER-PRESSURISING | 1 | |
| IAE1P16042 | ADAPTER-LEAK TEST FUEL MANIFOLD | 13 | |
| IAE1P16205 | ADAPTER -AIR /OIL SYSTEM CHECK | 7 | |
| IAE1R18685 | ADAPTER - INHIBITING RIG | 17 | |
| IAE1R18685-2 | ADAPTER-INHIBITING RIG ATTCHMENT | 1 | |
| IAE1R18757 | ADAPTER - INHIBITING RIG | 12 | |
| IAE1R19416 | WRENCH ADAPTER-EEC CUADRO 3/8" | 12 | |
| IAE2F10367 | ADAPTER - AIRFLOW TEST | 1 | |
| IAE2F10411 | ADAPTER - VACUUM TEST | 1 | |
| IAE2R19427 | ADAPTER-TORQUE TOOL | 5 | |
| IAE4P16228 | ADAPTER-HOSE | 5 | |
| IAS-2300-01 | DRAIN-FILL NOZZLE ADAPTER ASSY | 1 | |
| IE-20B | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| IFR 4000 | ADAPTER - COAX (TNC TO BNC) | 33 | |
| IFR 6000 | ADAPTER - TNC FEMALE TO N MALE | 28 | |
| IM72 | ADAPTER,DRV,IMPCT,SQ,3/4IN,1IN,1-5/8IN | 2 | |
| IPEH-002021-QM | CAN-USB ADAPTER QM | 1 | |
| IPPLP-P21760 | ADAPTER KIT TO CONVERT IPPLK-P22970 PORTABLE POORF LOAD KIT | 1 | |
| IPPLP-P21760DELETE | ADAPTER KIT TO CONVERT IPPLK-P22970 PORTABLE POORF LOAD KIT | 1 | |
| IPPLP4103-8 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT MS14103-8 BEARINGS | 1 | |
| IPPLP4104-10 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-10) | 1 | |
| IPPLP4104-14 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-14) | 1 | |
| IPPLP4104-6 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-6) | 1 | |
| IPPLP4104-7 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14104-7) | 1 | |
| IR224UN-LN96 | USB INTERFACE RAW-IR ADAPTER | 1 | |
| IR650 | ADAPTER - IMEXTOOL | 1 | |
| IS1000118M9922-12 | MAINS MULTI-PLUG ADAPTER PACE 1000 | 1 | |
| J-BA-1 | BRAKE SUPPORT ADAPTER FOR 227A-JMS | 1 | |
| J10007-1 | ADAPTER - ENGINE BALLAST | 4 | |
| J10007-4 | ADAPTER-ENGINE BALLAST | 4 | |
| J10007-54 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT | 1 | |
| J10007-56 | Adapter Assembly - Weight Eqpt, Dummy Engine | 1 | |
| J10007-57 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 PW4000) | 1 | |
| J10007-58 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 RB211) | 1 | |
| J10007-59 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (787 GENX-1B) | 2 | |
| J10007-60 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT | 2 | |
| J12007-1 | ADAPTER - NOSE LANDING GEAR STRUT SERVICING | 6 | |
| J12007-2 | ADAPTER NLG STRUT SERVICING(SPL-10668) | 2 | |
| J20001-40 | HOIST-LRU,MAIN EE BAY(ADAPTER) | 1 | |
| J20009-132 | ADAPTER - HOIST, AIR CONDITIONING PACK | 1 | |
| J20009-133 | ADAPTER - HEAT EXCHANGER | 1 | |
| J20009-136 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC | 9 | |
| J20009-140 | CRADLE ADAPTER - JACKING EQPT, HYDRAULIC TELESCOPING - 757/767 | 2 | |
| J20009-50 | ADAPTER - LOAD POSIT | 12 | |
| J20009-64 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC 777-200ER, -200F, | 5 | |
| J20009-68 | Jacking Equipment -Hydraulic Telescoping (Ce) (Cradle Adapter) | 15 | |
| J20009-70 | CRADLE ADAPTER - JACKING EQPT, HYDRAULIC TELESCOPING - 757/767 | 7 | |
| J20009-88 | Cradle Adapter - Jacking Eqpt | 9 | |
| J20011-1 | Interface adapter-GE floor hoist lru | 7 | |
| J20089-68 | ADAPTER ASSEMBLY-TELESCOPING HYDRAULIC | 1 | |
| J21001 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-132 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 7 | |
| J21001-133 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-134 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-136 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 3 | |
| J21001-137 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 3 | |
| J21001-138 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 4 | |
| J21001-153 | HEAT EXCHANGER ADAPTER ASSY, J21001-74, -82, -136, OR -157 (INCLUDED IN J21001 EQPT) | 1 | |
| J21001-154 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 5 | |
| J21001-155 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 4 | |
| J21001-156 | ADAPTER - HOIST, AIR CONDITIONING PACK | 4 | |
| J21001-2 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-3 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-72 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 1 | |
| J21001-73 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-74 | ADAPTER - HEAT EXCHANGER | 1 | |
| J21001-79 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 5 | |
| J21001-80 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-81 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-81-M | FISHPOLE ADAPTER EQPT, MFD PARTS FOR -81 | 1 | |
| J21001-82 | HOIST ADAPTER - AIRCOND PACK | 5 | |
| J21001-83 | 4. ADAPTER - CONDENSER/REHEATER | 2 | |
| J21001-84 | HOIST ADAPTER EQPT -0 AIR CYCLE | 2 | |
| J21001-88 | HOIST ADAPTER EQPT -0 ARM | 1 | |
| J21001-89 | HOIST ADAPTER EQPT -0 ARM | 4 | |
| J21001-90 | HOIST ADAPTER EQPT -0 | 1 | |
| J21001-94 | Hoist adapter eqpt-air conditioning pack | 1 | |
| J2100180 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21002-1 | PROOF LOAD EQUIPMENT - HOIST ADAPTER EQUIPMENT, A/C PACK | 6 | |
| J21007-1 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 4 | |
| J21007-26 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 4 | |
| J21007-31 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 1 | |
| J23001 | HOIST ADAPTER-SATCOM TOP-MOUNTED HIGH GAIN ANTENNA | 1 | |
| J23001-1 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 2 | |
| J23001-12 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 1 | |
| J23001-12-HM | HYDRO MFD PARTS-HOIST ADAPTER | 1 | |
| J23001-26 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 6 | |
| J23001-27 | HOIST ADAPTER - SATCOM, TOP-MOUNTED HIGH GAIN ANTENNA | 1 | |
| J23002 | ADAPTER EQPT-HOIST,CROWN ZONE | 1 | |
| J23002-1 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE | 4 | |
| J23002-16 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE | 8 | |
| J24001-43 | HOIST ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) (PW/GE/RR ENGINES) | 6 | |
| J24001-50 | HOIST ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) (PW/GE/RR ENGINES) | 11 | |
| J24002 | HOIST ADAPTER-IDG(PW/GE/RR ENGINES) | 1 | |
| J24002-73 | HOIST ADAPTER - IDG (PW/GE/RR ENGINES) | 7 | |
| J24018-1 | Hoist adapter-IDG (Integrated drive gene | 8 | |
| J24018-49 | Hoist adapter-IDG | 5 | |
| J24019-1 | Hoist adapter-backup generator | 6 | |
| J24019-2 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J24019-3 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J25011 | ADAPTER EQPT-OFAR/OFCR MODULE RMVL/INSTL | 1 | |
| J25011-1 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 2 | |
| J25011-64 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE, REMOVAL / INSTALLATION | 3 | |
| J25011-68 | Adapter eqpt-ofar/ofcr module，rmvl/instl | 4 | |
| J26004-49 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 7 | |
| J27003-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, L.E. SLAT | 10 | |
| J27003-2 | DRIVE ADAPTER -TORQUE TUBE | 1 | |
| J27010 | ADAPTER-CONTROL WHEEL | 1 | |
| J27010-34 | Adapter-Control Whee | 1 | |
| J27010-44 | ADAPTER - CONTROL WH | 1 | |
| J27010-56 | ADAPTER - CONTROL WHEEL | 8 | |
| J27015-1 | SPLINE ADAPTER - LE/TE POWER DRIVE UNIT, MANUAL DRIVE | 7 | |
| J27021-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, T.E. FLAP | 10 | |
| J27022 | ADAPTER-TORQUE,SLAT PINION | 1 | |
| J27022-1 | ADAPTER - TORQUE, SLAT PINION | 8 | |
| J27030-29 | ADAPTER ASSY - RIGGI | 9 | |
| J27035-41 | LOCK EQPT-ADAPTER | 2 | |
| J27052 | ADAPTER-SIDE GUST SUPPRESSION LEAK TEST | 1 | |
| J27052-1 | ADAPTER - SIDE GUST SUPPRESSION LEAK TEST | 11 | |
| J27066-1 | ADAPTER EQUIPMENT - TEST FIXTURE, STABILIZER TRIM | 1 | |
| J27072-1 | ADAPTER - TEST, SARD SYSTEM | 12 | |
| J27078-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 11 | |
| J27083-1 | Adapter Cable - Tester Flap Skew Sensor | 2 | |
| J27108-1 | Drive adapter-drive line coupling,flap and slat | 1 | |
| J27108-13 | Drive adapter-drive line coupling,flap and slat | 1 | |
| J27114-1 | Adapter-torque,slat pinion | 1 | |
| J27132-1 | Adapter equipment-aileron PCU,removal and installation | 2 | |
| J28002-1 | ADAPTER DE-FUEL | 4 | |
| J28007-10 | Adapter Assy - Pressurization Eqpt | 1 | |
| J28007-11 | Adapter Assy - Pressurization Eqpt | 4 | |
| J28014-1 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VLAVE | 2 | |
| J28017-1 | ADAPTER EQUIPMENT - DRY BAY PRESSURIZATION, WING | 6 | |
| J29003 | ADAPTER - HOIST, AIR DRIVEN PUMP SPL-1802 | 1 | |
| J29003-72 | Hoist Adapter - ADU Removal/installation | 5 | |
| J29003-85 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 7 | |
| J29003-93 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION | 7 | |
| J29007-1 | Hoist adapter-engine driven pump | 5 | |
| J29007-2 | Hoist adapter-engine driven pump | 4 | |
| J29007-3 | Hoist adapter-engine driven pump | 4 | |
| J30002-1 | ADAPTER CABLE - PMAT(PORTABLE MAINTENANCE ACCESS TERMINAL) TO RJ-45 | 1 | |
| J32025-1 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 7 | |
| J32025-29 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 4 | |
| J32032 | ADAPTER ASSEMBLY WRENCH - L.G. WHEEL RETAINING NUT | 4 | |
| J32032-19 | Wheel Retention Nut Adapter Socket - MLG | 9 | |
| J32032-22 | ADAPTER ASSEMBLY WRENCH - L.G. WHEEL RETAINING NUT | 23 | |
| J32032-23 | ADAPTER ASSEMBLY - LDG WHEEL RETAINING NUT WRENCH | 11 | |
| J32037-106 | ASSEMBLY - WRENCH ADAPTER | 19 | |
| J32055-01 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-03 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-1 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
| J32055-10 | ADAPTER -0 WELDMENT | 1 | |
| J32055-11 | ADAPTER -0 WELDMENT | 1 | |
| J32055-14 | ADAPTER -0 WELDMENT | 1 | |
| J32055-22 | SOCKET -0 ADAPTER | 1 | |
| J32055-24 | SOCKET -0 ADAPTER | 1 | |
| J32055-3 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
| J32055-34 | SOCKET -0 ADAPTER | 1 | |
| J32055-36 | SOCKET -0 ADAPTER | 1 | |
| J32055-38 | SOCKET -0 ADAPTER | 1 | |
| J32055-43 | SOCKET -0 ADAPTER | 1 | |
| J32055-50 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 9 | |
| J32055-61 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 7 | |
| J32055-7 | ADAPTER -0 WELDMENT | 1 | |
| J32055-8 | ADAPTER -0 WELDMENT | 1 | |
| J32055-81 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 4 | |
| J32055-82 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 2 | |
| J32055-9 | ADAPTER -0 WELDMENT | 1 | |
| J32055-97 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 1 | |
| J36005-1 | Adapter equipment-fan air modulating valve | 2 | |
| J36024-1 | Adapter equipment-prsov and hpsov | 1 | |
| J36025-1 | PRESSURE TEST ADAPTER- HPSOV/PRSOV/FAMV | 1 | |
| J45002-1 | ADAPTER CABLE - PMAT TO RJ-45 | 2 | |
| J47548-2 | PROTECTOR ADAPTER-NLG (A320) | 9 | |
| J47549 | Adapter-NLG | 42 | |
| J47565 | ADAPTER-NLG SHOCK ABSORBE | 16 | |
| J49005-1 | JACKING ADAPTER - APU CRADLE | 3 | |
| J51005-1 | Installation/Removal Adapter - Fuselage Drain Valv | 4 | |
| J51005-7 | Adapter-Drain Valve | 10 | |
| J54004-ADP | Adapter-Scheduling | 1 | |
| J54005 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 1 | |
| J54005-1 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 3 | |
| J54005-1-M | HOIST ADAPTER-BRACE DIAGONAL | 1 | |
| J54005-32 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 4 | |
| J54005-51 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL (CE) | 2 | |
| J71001-84 | ADAPTER-MALE, FLARELESS STEEL | 1 | |
| J71013-1 | ADAPTER EQUIPMENT - STABILIZATION, PW ENGINE MOUNT | 3 | |
| J71013-22 | ADAPTER EQUIPMENT - STABILIZATION, PW4084 ENGINE M | 1 | |
| J71013-25 | ADAPTER EQUIPMENT - STABILIZATION, PW ENGINE MOUNT | 7 | |
| J71013-44 | ADAPTER EQUIPMENT - STABILIZATION, PW ENGINE MOUNT | 5 | |
| J71013-44-HM | HYDRO MFD PARTS-ADAPTER | 1 | |
| J71037-1 | ADAPTER ASSEMBLY - STABILIZATION, ROLLS ROYCE AFT ENGINE MOUNT | 10 | |
| J71037-1-HM | HYDRO MFD PARTS -0 ADAPTER | 1 | |
| JCIPSD737-1 | TOOL-FQIS TEST SET ADAPTER KIT | 1 | |
| JGHLA | Ionic Quick-Release/Hoselock Adapter, 12 mm, Male | 2 | |
| JGHLAB | Ionic Quick-Release/Hoselock Adapter, Male, 12 mm, Blue | 2 | |
| JHWX-20C | 1 DR ADAPTER FOR X-20B | 1 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| K-1037 | Tronair K-1037 DeHavilland Dash 7 Compressor Washer Adapter | 4 | |
| K-1057 | Tronair K-1057 Garrett TPE311 Compressor Washer Adapter | 7 | |
| K-1152 | Tronair K-1152 Pratt & Whitney PT-6A Compressor Washer Adapter | 7 | |
| K-1243 | Tronair K-1243 Cessna Caravan Compressor Washer Adapter | 6 | |
| K-1269 | Tronair K-1269 Beech King Air 200 Compressor Washer Adapter | 2 | |
| K-1285 | ADAPTER KIT - PRESSURIZATION TEST KIT (TRONAIR) | 6 | |
| K-1288 | TRONAIR K-1288 – CPU ADAPTER KIT FOR SELECT CESSNA CITATION AIRCRAFT | 3 | |
| K-1357 | Tronair K-1357 Saab 340 Compressor Washer Adapter | 5 | |
| K-1709 | Tronair K-1709 DeHavilland DHC-6 Twin Otter Compressor Washer Adapter | 1 | |
| K-1710 | Tronair K-1710 Bombardier Canadair Challenger & CRJ100 Compressor Washer Adapter | 6 | |
| K-1795 | TFE 731 -2 THRU -5 ENGINE STAND ADAPTER KIT | 1 | |
| K-1953 | Tronair K-1953 Rolls-Royce (Allison) 250-C20J & Bell 206B-JR3 Compressor Washer Adapter | 5 | |
| K-2032 | ADAPTER KIT (FJ44-1A) | 5 | |
| K-2114 | Kit, Cj-610 Engine Adapter (P) | 2 | |
| K-2115 | Kit, P&W Pt6a 1-36 Adapter (P) | 7 | |
| K-2115 | ADAPTER KIT FOR PRATT & WHITNEY PT6A-1 TO 3 & 36 ENGINES | 7 | |
| K-2116 | ADAPTER (PT6A-41 - PT6A-65), USE WITH 08-2001-0000 STAND | 6 | |
| K-2248 | ADAPTER KIT-CFM56 ENGINE WASHER | 7 | |
| K-2411 | ADAPTER-POTABLE WATER | 10 | |
| K-2601 | KIT-CPUR ADAPTER | 4 | |
| K-2685 | KIT, PW-530A ADAPTER CE | 4 | |
| K-2714 | Tronair K-2714 DeHavilland Dash-8 100300 Compressor Washer Adapter | 5 | |
| K-2717 | KIT-OXYGEN CHARGING ADAPTER | 6 | |
| K-2730 | MAIN GEAR AXLE JACK ADAPTER (02-7833-0110) | 1 | |
| K-2730 (02-7833-0110) | Main Gear Axle Jack Adapter (02-7833-0110) | 1 | |
| K-2733-02 | KIT,DASH 8-400 NLG ADAPTER (P) | 3 | |
| K-2734-02 | KIT,DASH 8-400 MLG ADAPTER (P) | 5 | |
| K-2769 | KIT, PW-545A ADAPTER CE | 4 | |
| K-2770 | ADAPTER KIT (TFE 731 1-5) | 4 | |
| K-2808 | ADAPTER KIT (TFE 731-20) | 3 | |
| K-3025 | ADAPTER-BRAKE (ANTI-SKID TESTER) | 8 | |
| K-3202 | Tronair K-3202 Citation X Compressor Washer Adapter | 1 | |
| K-3706 | ADAPTER FOR THE MIL-H-5606 OIL FILLING DEVICE IN AMORTSTOYKI | 16 | |
| K-3803 | Engine Compressor Washer Adapter Kit - Challenger 300 | 4 | |
| K-3861 | KIT: ADAPTER,TFE-731-60, | 1 | |
| K-3979 | Tronair K-3979 Sikorsky S92 Compressor Washer Adapter | 4 | |
| K-4055 | KIT: ADD-ON,ADAPTER,TUG,GRY, FALCON 50/900/2000 | 2 | |
| K-4056 | KIT: ADD-ON,ADAPTER,TUG,GRY, LEAR 40/45 | 2 | |
| K-4123 | KIT: ADD-ON,ADAPTER,TUG,FALCON 7X,GRY, | 1 | |
| K-4229 | KIT, NOSE ADAPTER ASS'Y - INCLUDED WITH 02-7818C0110 AXLE JACK | 4 | |
| K-4281 | ADAPTER - PRESSURIZATION TEST, CABIN | 1 | |
| K-4464 | Tronair K-4464 Sikorsky S76 Compressor Washer Adapter | 1 | |
| K-4500 | Tronair K-4500 Eurocopter Compressor Washer Adapter | 4 | |
| K-5062 | ADAPTER, FWD BAT-TERY LIFT | 2 | |
| K1134100-500 | ADAPTER - FLUSHING, EVAPORATOR | 1 | |
| K1134100-500 1134100-501 | ADAPTER - FLUSHING, EVAPORATOR | 1 | |
| K1710 | ADAPTER KIT- MOTOR WATER WASH UNIT | 6 | |
| K20001-1 | Hoist Adapter - Forward EE Bay LRU's | 1 | |
| K20008-1 | Hoist Adapter Kit - Aft EE Bay LRU's | 1 | |
| K2012 | ADAPTER-ENGINE LIFT | 6 | |
| K21 | KIT, ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21003-67 | K21003-67 PECS/ICS PUMP R&R ADAPTER | 10 | |
| K21004 | ADAPTER EQUIPMENT-HEAT EXCHANGER CLUSTER REMOVAL AND INSTALLATION | 1 | |
| K21004-1 | Jack Adapter - Heat Exchanger, AC Pack | 1 | |
| K21004-1 Upgrade | Adapter equipment-heat exchanger cluster removal and installation | 1 | |
| K21004-40 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 5 | |
| K21004-72 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 9 | |
| K21004-79 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 2 | |
| K21004-84 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 2 | |
| K21004-85 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 5 | |
| K21004-85. | ADAPTER EQUIPMENT, HEAT EXCHANGE CLUSTER R/I - C | 5 | |
| K21004-94 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION (CE) | 1 | |
| K21006 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-1 | Jack Adapter - Cabin Air Compressor, AC Pack | 1 | |
| K21006-11 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-12 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-13 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-26 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-27 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-36 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-40 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-41 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-46 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 3 | |
| K21006-47 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-48 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-49 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-5 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-51 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-52 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-53 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 10 | |
| K21006-53 | JACK ADAPTER-AIR COMPRESSOR,ACPACK | 10 | |
| K21008 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE, AIR CONDITIONING PACK (CE) | 9 | |
| K21008-1 | JACK ADAPTER-AIR CYCLE MACHINE,ACPACK | 9 | |
| K21008-10 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-13 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-16 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-17 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 2 | |
| K21008-2 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-24 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-25 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-26 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-27 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-3 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-4 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-6 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-7 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-8 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-9 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21009-1 | Jack Adapter - Lower Recirculation Fan, AC Pack | 1 | |
| K21010-1 | Jack Adapter - RAM Air Fan, AC Pack | 1 | |
| K21010-45 | RAM AIR FAN, AIR CONDITIONING PACK - JACK ADAPTER (CE) | 4 | |
| K21010-54 | RAM AIR FAN, AIR CONDITIONING PACK - JACK ADAPTER | 5 | |
| K21011 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-1 | Jack Adapter - Adjustable, AC Pack Components | 1 | |
| K21011-11 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-15 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-20 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-21 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-22 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-23 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-26 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-28 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 2 | |
| K21011-32 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-4 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-42 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-5 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-50 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-51 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-52 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-55 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-56 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-57 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-58 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-59 | Adapter Eqpt - Adjustable Angle, Jack | 1 | |
| K21011-6 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-60 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-61 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-62 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, JACK (CE) | 9 | |
| K21011-62 | ADAPTER EQPT-ADJUSTABLE ANGLE,JACK | 9 | |
| K21011-63 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 2 | |
| K21011-65 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011PLD | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21014 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-1 | JACK ADAPTER - CONDENSER, AIR CONDITIONING PACK, REMOVAL AND INSTALLATION (CE) | 7 | |
| K21014-1 | JACK ADAPTER-CONDENSER AC PACK,R&I | 7 | |
| K21014-2 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-22 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-23 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-24 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-25 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-26 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-29 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-30 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-31 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-32 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-33 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-34 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-35 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-37 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-38 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-39 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-4 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-5 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-6 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-7 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-9 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21016 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-1 29 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 10 | |
| K21016-10 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-101 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-11 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-111 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 2 | |
| K21016-12 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 4 | |
| K21016-129 | Adapter Kit - Liq Cooling System Svc | 10 | |
| K21016-13 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-130 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 8 | |
| K21016-136 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 7 | |
| K21016-137 | Kit- Adapter | 1 | |
| K21016-14 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-15 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-155 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 2 | |
| K21016-16 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-17 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-2 | Kit - Adapter-Liquid Cooling | 1 | |
| K21016-20 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-3 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-4 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-5 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 4 | |
| K21016-55 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-6 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-64 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-7 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 2 | |
| K21016-8 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-81 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-82 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-83 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-9 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-92 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21016-93 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 1 | |
| K21029-1 | ADAPTER - JACK, SECONDARY HEAT EXCHANGER | 4 | |
| K21029-19 | Adapter-jack，secondary heat exchanger | 4 | |
| K21030-1 | PCA ADAPTER - RAM AIR INLET | 2 | |
| K221016-130 | ADAPTER KIT - CSC AND C-TOP CART, POWER ELECTRONIC, QTY: 1EA | 1 | |
| K23002-1 | ADAPTER CABLE - SRT | 3 | |
| K24001 | HOIST ADAPTER ASSY -0 VFSG (GE AND RR) AND ASG | 1 | |
| K24001-1 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 10 | |
| K24001-1-REVE | ADAPTER - HOIST ASSEMBLY, VFSG (GE/RR) AND ASG | 1 | |
| K24001-10 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-101 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-106 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-108 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-109 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-112 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-113 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-114 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 11 | |
| K24001-118 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 12 | |
| K24001-118-REVE | HOIST ADAPTER ASSY - RR VFSG RI | 1 | |
| K24001-119 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 9 | |
| K24001-12 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-120 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 9 | |
| K24001-14 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-15 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-16 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-17 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-18 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-19 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-2 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 1 | |
| K24001-20 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-21 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-22 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-23 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-24 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-25 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-26 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-3 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 2 | |
| K24001-30 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-31 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-32 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-33 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-34 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-35 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-4 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 2 | |
| K24001-40 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-43 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-49 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-5 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-51 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-52 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-53 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-54 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-55 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-58 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-59 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-60 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-61 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-64 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-65 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-69 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-7 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-74 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-75 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-77 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-78 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-79 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-8 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-80 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-81 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-84 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-86 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-88 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-89 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-90 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-91 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-92 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-93 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-94 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-96 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-97 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-98 | Hoist Adapter Assembly -Variable Frequency Starter Generator (Vfsg) (Ge And Rr) And Apu Starter Generator (Asg) (Ce) | 1 | |
| K24001-99 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24005-94 | HOIST ADAPTER - VFSG, RR ENGINE STAND | 8 | |
| K24014-1 | ADAPTER CABLE - BATTERY GSE | 5 | |
| K2478 | ENGINE HOIST FORWARD SLING ADAPTER (560-0260 THRU 0538) | 2 | |
| K25002 | Adapter Equipment -Overhead Flight Attendant Rest | 1 | |
| K25002-139 | ADAPTER EQUIPMENT - OFAR / OFCR MODULE | 6 | |
| K27001 | ADAPTER - LEADING EDGE / TRAILING EDGE PWR DRIVE U | 1 | |
| K27002 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR | 1 | |
| K27002-1 | Adapter - TE Flap Geared Rotary Actuator, Removal | 1 | |
| K27002-83 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 1 | |
| K27002-83 upgrade to K27002-85 | Adapter eqpt-te geared rotary actuator，removal/installation | 1 | |
| K27002-85 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 9 | |
| K27002-97 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL / INSTALLATION | 1 | |
| K27003 | ADAPTER EQPT -0 AILERON PCU REMOVAL/ | 1 | |
| K27003-1 | ADAPTER EQUIPMENT - AILERON POWER CONTROL UNIT REMOVAL/ INSTALLATION (CE) | 9 | |
| K27003-1 | ADAPTER EQPT-AILERON PCUREMOVAL/INSTALLATION | 9 | |
| K27007 | DRIVE ADAPTER EQUIPMENT - ACTUATOR HORIZONTAL STAB | 1 | |
| K27007-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 9 | |
| K27007-1-A | Drive adapter-actuator，horizontal stabilizer trim | 1 | |
| K27007-2 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-4 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-5 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-6 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-7 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27010-1 | ADAPTER EQUIP. - REM'L & INST'L HIGH LIFT HYDRAULI | 1 | |
| K27012 | Drive Adapter -Torque Tube Coupling. Leading Edge Slat And Trailing Edge Flap | 1 | |
| K27012-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING | 1 | |
| K27028 | Spline Adapter -Leading Edge/Trailing Edge Power Drive Unit. Manual Drive | 1 | |
| K27028-1 | SPLINE ADAPTER - LEADING EDGE TRAILING EDGE PWR DR | 1 | |
| K27030-2 | ADAPTER EQUIPMENT - SPLINE | 1 | |
| K27030-95 | Adapter Equipment - Spline | 9 | |
| K27030-99 | ADAPTER EQUIPMENT - SPLINE | 2 | |
| K27068-10 | MEASURING TOOL - ENCODER CALIBRATION ADAPTER SET | 7 | |
| K27069-1 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 7 | |
| K2714 | KIT: WASHER ADAPTER, DASH 8 -100,-300: AU/NZ | 5 | |
| K2717 | KIT-OXYGEN CHARGING ADAPTER | 6 | |
| K28001-1 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE (ADAPTER) | 9 | |
| K28004-1 | ADAPTER - LEAK TEST, APU FUEL LINE SHROUD | 5 | |
| K28004-30 | ADAPTER - LEAK TEST, APU FUEL LINE SHROUD | 8 | |
| K28005-1 | ADAPTER - PRESSURE RELIEF VALVE (ASSEMBLY K28005-12 IS INCLUDED IN KIT K28005-1) | 9 | |
| K29001 | ADAPTER EQPT -0 EMP REMOVAL/INSTALLATION | 1 | |
| K29001-1 | ADAPTER EQUIPMENT - ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION (CE) | 3 | |
| K29001-60 | ADAPTER EQUIPMENT - ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION (CE) | 7 | |
| K29001-60 | ADAPTER EQPT-EMPREMOVAL/INSTALLATION | 7 | |
| K29003-1 | ADAPTER ASSEMBLY - ENGINE DRIVEN PUMP BLEED ADAPTER | 7 | |
| K29004-1 | ADAPTER - RESERVOIR STANDPIPE OPERATIONAL TEST | 2 | |
| K29004-17 | ADAPTER - RESERVOIR STANDPIPE OPERATIONAL TEST | 7 | |
| K29005-1 | Jumper - RAT Plug Adapter (Dispatch) | 6 | |
| K3025 | ADAPTER-BRAKE (ANTI-SKID TESTER) | 8 | |
| K31001-1 | Adapter Cable - D38999 Receptacle To Interphone Jack | 10 | |
| K32006 | HOIST ADAPTER EQPT -0 NLG DRAG BRACE RMVL/INSTL | 1 | |
| K32006-1 | HOIST ADAPTER EQUIPMENT - NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION (CE) | 7 | |
| K32022-1 | Wheel Retention Nut Adapter Socket - NLG | 18 | |
| K32032-1 | WRENCH ADAPTER - STEERING NUT, NLG | 10 | |
| K32034-1 | TORQUE ADAPTER - ELECTRICAL BRAKE ACTUATOR CONNECTOR, MAIN LANDING GEAR | 9 | |
| K32036-1 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: INCLUDES BOTH ADAPTER SIMULATOR ASSY "-4" ORANGE FOR 787-8, AND "-5" YELLOW FOR 787-9 | 10 | |
| K32036-2 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: ADAPTER SIMULATOR ASSY -4 IDENTIFIED AS ORAN | 8 | |
| K32036-4 | ADAPTER SIMULATOR ASSY(MLG 787-8) | 1 | |
| K32036-5 | ADAPTER SIMULATOR ASSY(MLG 787-9) | 1 | |
| K4055SP | KIT: ADD-ON,ADAPTER,TUG,GRY, FALCON 50/900/2000 | 1 | |
| K4056SP | KIT: ADD-ON,ADAPTER,TUG,GRY, LEAR 40/45 | 1 | |
| K4123SP | KIT: ADD-ON,ADAPTER,TUG,FALCON 7X,GRY, | 1 | |
| K4187 | HEAD: ADAPTER KIT,500 SERIES, 01-1270-0010 ONLY | 2 | |
| K52030 | ADAPTER -0 MANUAL DRIVE, LCD | 1 | |
| K52030-1 | ADAPTER - MANUAL DRIVE, LARGE CARGO DOOR | 8 | |
| K52030-2 | ADAPTER-MANUAL DRIVE,LCD | 1 | |
| K52044-1 | ADAPTER - DRAIN VALVE | 1 | |
| K651170 | Mitutoyo K651170 - M3-M2 Adapter | 1 | |
| K71003 | PROOF LOAD FIXTURE ADAPTER -0 BOOTSTRAP | 1 | |
| K71003-1 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT | 1 | |
| K71003-65 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 4 | |
| K71003-73 | Proof Load Fixture Adapter -Bootstrap Equipment | 1 | |
| K71003-79 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 1 | |
| K71003-80 | Proof Load Fixture Adapter -Bootstrap Equipment | 1 | |
| K71003-86 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 1 | |
| K71003-87 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 3 | |
| K71012 | ADAPTER-HAND PUMP/PODS | 1 | |
| K71012-1 | ADAPTER - HAND PUMP, POWER DOOR OPENING SYSTEM | 8 | |
| K71012-1-REVB | ADAPTER - HAND PUMP PDOS | 1 | |
| K78016-1 | ADAPTER - HAND PUMP, PDOS | 2 | |
| K9895 | ADAPTER 1-1 1/2 | 1 | |
| KA-91-07 | ADAPTER - TNC FEMALE TO N MALE | 4 | |
| KA91-07 | ADAPTER - TNC FEMALE TO N MALE (SPL-14700) | 4 | |
| KHC-2173 | VFG FILL-PORT OIL RE-PLENISH ADAPTER | 10 | |
| KHC-4003 | ADAPTER FOR THE MIL-H-5606 OIL FILLING DEVICE IN AMORTSTOYKI | 4 | |
| KIT9190 | ADAPTER - TORQUE | 1 | |
| KIV-77 | ADAPTER FOR IFF-45TS | 1 | |
| K‑3706 | ADAPTER FOR MIL-H-5606 OIL FILLING DEVICE FOR TRONAIR (USA) | 16 | |
| L0477-R00 | TIRE CALIBRATOR ADAPTER - AIRBUS | 1 | |
| L2130 | Grease Gun Adapters & Extensions (Description: Grease Injector Needle) (Add to cart: Add To Cart) (Description: Needle Point Grease Coupler) (Add to cart: Add To Cart) (Description: Seal-Off Coupler) (Add to cart: Add To Cart) | 1 | |
| L2435 | Grease Gun Adapters & Extensions (Description: Grease Injector Needle) (Add to cart: Add To Cart) (Description: Needle Point Grease Coupler) (Add to cart: Add To Cart) (Description: Seal-Off Coupler) (Add to cart: Add To Cart) (Description: 6" Straight Ri | 1 | |
| L2440 | Grease Gun Adapters & Extensions (Description: Grease Injector Needle) (Add to cart: Add To Cart) (Description: Needle Point Grease Coupler) (Add to cart: Add To Cart) (Description: Seal-Off Coupler) (Add to cart: Add To Cart) (Description: 6" Straight Ri | 1 | |
| L2455 | Grease Gun Adapters & Extensions (Description: Grease Injector Needle) (Add to cart: Add To Cart) (Description: Needle Point Grease Coupler) (Add to cart: Add To Cart) (Description: Seal-Off Coupler) (Add to cart: Add To Cart) (Description: 6" Straight Ri | 1 | |
| LB20004-42 | ADAPTER - ACCESS PANEL, LEVERAGE | 1 | |
| LBOA-20-T6 | ADAPTER-OFFSET | 1 | |
| LBOA20 | ADAPTER-OFFSET | 2 | |
| LCTC4558 | LIFING ADAPTER - COMP ROTOR | 1 | |
| LH-ROT-01-11-0 | SERVICE KIT SPRAY ADAPTER CFM56-5B | 1 | |
| LIL19352 | GM/FORD ADAPTER W/O-RING BLK | 1 | |
| LIL24810 | 2-7/16 ADAPTER | 1 | |
| LIL24820 | 2-3/4 ADAPTER | 1 | |
| LIL24830 | 3-1/2 ADAPTER | 1 | |
| LIL24840 | 1-5/16 ADAPTER | 1 | |
| LIL24850 | 1-1/2 ADAPTER | 1 | |
| LLA537A129 | ADAPTER-HOLDING | 1 | |
| LPA200SSX30 | LPA2-TRAVEL CASE ACCESSORIES AIRBUS ADAPTER | 1 | |
| LPA20PSTA30 | LPA2-TRAVEL CASE ACCESSORIES AIRBUS ADAPTER | 2 | |
| LST50697 | 0-100W/3CONTACTPOINTSADAPTERW/ | 1 | |
| LTCT3685 | GUIDE & ADAPTER - #2 AFT SEAL | 2 | |
| LTCT7285 | ADAPTER MECHANICAL PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| LX-1418 | ADAPTER - RUBBER TIPPED | 2 | |
| LX1418 | ADAPTER - RUBBER TIPPED | 2 | |
| M21930 | ADAPTER FILLING NLG (alternate 3956572-1 | 29 | |
| M21931 | HOIST-ADAPTER NLG DRUG STRUT | 16 | |
| M27456-2104D | ADAPTER - OFFSET, CRANK PAD | 1 | |
| M46228 | ADAPTER - LOCKING SPRING NLG A320NEO | 5 | |
| M46292 | ADAPTER - BRAKE UNIT NUT | 28 | |
| M46750 | ADAPTER-MLG WHL AXLE | 20 | |
| M47039 | ADAPTER - ACTR CYLINDER NLG A320NEO | 3 | |
| M4G750 | ADAPTER - MLG WHEEL AXLE NUT | 1 | |
| M601-915.9 | DE-AERATING ADAPTER | 1 | |
| M65724077 | ADAPTER - TORQUE | 1 | |
| M65725379 | SPECIAL TOOL - ACM COMPRESSOR ADAPTER | 2 | |
| MA070004-31 | ADAPTER EQPT - MAIN FUEL TANK PUMPS | 1 | |
| MA280009-1 | ADAPTER EQUIPMENT - AERIAL REFUELING RECEPTACLE | 1 | |
| MA280021-29 | ADAPTER EQPT - BODY FUEL TANK HUMAN ACCESS HATCH | 1 | |
| MA280024-1 | ADAPTER CABLE, BODY TANK PRE-CHECK CONTROL BOX | 1 | |
| MA280051-1 | ADAPTER - MEASUREMENT PLUNGE MICROMETER | 1 | |
| MAP-ADAPT-KIT1-COM | MAP-ADAPT-KIT1-COM;Commscope MAP-200 Kit1 Power Meter Adapter Kit | 1 | |
| MBEU113234 | ADAPTER TEST-DROGUE GUN | 1 | |
| MBEU113236 | ADAPTER TEST-BTRU | 1 | |
| MBEU56425-2 | ADAPTER, MOUNTING-DROGUE GUN | 1 | |
| MBEU57397 | ADAPTER, TEST-SEAT FIRING BREECH | 1 | |
| MBEU57829 | ADAPTER, TEST-HPRU PRESSURE INLET | 1 | |
| MBEU57843-2 | ADAPTER, TEST-BTRU | 1 | |
| MBEU58363 | ADAPTER-GAS SHACKLE | 1 | |
| MBEU61344 | ADAPTER, TEST-ROCKETS SYSTEM FLEXIBLE PIPE | 1 | |
| MC-4A | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC-4B | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC200001-1 | ADAPTER KIT - UNIVERSAL HOIST EQPT | 1 | |
| MC200001-69 | ADAPTER KIT - UNIVERSAL HOIST EQPT | 1 | |
| MC300002-1 | DE-ICER NOSE REDOME ADAPTER | 1 | |
| MC950001-36 | JACK ADAPTER-ESM RADAR R/I | 1 | |
| MC950003-52 | ADAPTER EQPT - EOIR TURRET DEPLOYMENT UNIT, SECTION 43 AND 46 | 1 | |
| ME65B40000-1 | TORQUE WRENCH ADAPTER - BRAKES, SIDE CARGO DOOR | 9 | |
| ME65B83635 | TORQUE WRENCH ADAPTER - BRAKES, SIDE CARGO DOOR | 14 | |
| MEN-44A-0401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0423F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0601F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0623F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0823F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1001F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1023F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1201F | Modular Extension Nosecap for offset adapter - Modular Assy | 2 | |
| MEN-44A-1223F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1423F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1601F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1623F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-46B-1801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-46B-1823F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| MFLX-6 | TRANSDUCER ADAPTER (STRAIGHT-6 INCHES (152 MM) LENGTH) | 2 | |
| MIL-H-5593-4-156-1OE | ADAPTER HOSE CABIN PRESSURIZATION SAFETY VALVE - TEST KIT | 1 | |
| MIT65B00115-1 | ADAPTER - PROTRACTOR, SPEED BRAKE | 2 | |
| MIT65B01201 | WRENCH ADAPTER - GLAND NUT, WING AND BODY GEAR | 7 | |
| MIT65B01202-1 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 11 | |
| MIT65B01218 | TORQUE ADAPTER - DRAG BRACE ASSEMBLY, WING LANDING GEAR | 5 | |
| MIT65B01500 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
| MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 1 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B02025 | TORQUE WRENCH ADAPTER ASSEMBLY - MIDFLAP INBOARD TRAILING EDGE | 1 | |
| MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
| MIT65B04308-1 | TORQUE ADAPTER SET - CARGO DOOR MECHANISM | 1 | |
| MIT65B05124 | TORQUE ADAPTER - END CAP, LOWER TRIPOD PIN NOSE LANDING GEAR | 1 | |
| MIT65B08802-1 | TORQUE WRENCH ADAPTER - BUNGEE DOWNLOCK, JURY STRUT, BODY LANDING GEAR | 1 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 6 | |
| MIT65B15171 | TORQUE ADAPTER - VARIABLE CAMBER FLAPS HINGE NUT | 3 | |
| MIT65B18229-2 | ADAPTER 747-SP | 1 | |
| MIT65B18229-2-INC | ADAPTER 747-SP | 1 | |
| MIT65B40500-1 | ADAPTER ASSEMBLY - VERTICAL FIN LAMB AIR MOVER | 1 | |
| MIT65B80326-6 | ADAPTER - PROTRACTOR, CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 2 | |
| MIT65B80495 | SPANNER ADAPTER - BRAKE PEDAL, CABLE BUS, CRANK ASSEMBLY | 1 | |
| MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM AND CENTERING MECHANISM, LATERAL CONTROL | 2 | |
| MIT65B80549 | ADAPTER - TORQUE WRENCH, OUTBOARD ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| MIT65B80550 | ADAPTER - TORQUE WRENCH, INBOARD ELEVATOR, POWER CONTROL UNIT | 6 | |
| MIT65B80859 | TORQUE WRENCH ADAPTER - SEQUENCE MECHANISM ASSEMBLY SPEED BRAKE | 1 | |
| MIT65B80934 | SPANNER ADAPTER - GEARBOX ASSEMBLY, OUTBOARD AILERON LOCKOUT | 1 | |
| MIT65B80985-9 | ADAPTER - PROTRACTOR, THRUST LEVER | 9 | |
| MIT65B81213 | TORQUE WRENCH ADAPTER - FORWARD RUDDER QUADRANT | 1 | |
| MIT65B81276 | TORQUE WRENCH ADAPTER - NOSE LANDING GEAR | 1 | |
| MIT65B81561 | SPLINE ADAPTER - OUTBOARD FLAP DRIVE | 4 | |
| MIT65B81875 | SCREWDRIVER - ADAPTER, RUDDER, ELEVATOR FEEL ACTUATOR | 1 | |
| MIT65B82314 | TEST ADAPTER - INBOARD HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| MIT65B82568 | ADAPTER - PRESSURE RELIEF VALVE, RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B82831 | SPLINED ADAPTER - ENGINE CONTROL, AUTOTHROTTLE CONTROL | 1 | |
| MIT65B90315 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 4 | |
| MIT65B90363 | ADAPTER - JT9D REAR MOUNT TANGENTIAL LINK | 1 | |
| MIT65B92408-1 | ADAPTER SHAFT - ALIGNMENT FIXTURE | 9 | |
| MIT65B92603-1 | ADAPTER - DEFUELING | 1 | |
| MIT65B92603-2 | ADAPTER - DEFUELING | 1 | |
| MIT65B92603-3 | ADAPTER - DEFUELING | 1 | |
| MIT65B97230 | ADAPTER - LUBRICATION, FAN THRUST REVERSER | 1 | |
| MIT65BO120 | ADAPTER - WRENCH, MLG STRUT GLAND NUT | 1 | |
| MIT69B81601-1 | ADAPTER - PROTRACTOR, THRUST REVERSER | 7 | |
| MIT69B82662 | SOCKET ADAPTER SET - SPOILER ACTUATOR BOLT | 5 | |
| MIT69B82662-17 | SET - SOCKET ADAPTER, SPOILER ACTUATOR BOLT, USED ON INBD SPOILERS 5 THRU 8 | 1 | |
| MJ-A4-0401F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0423F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0623F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0801F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0823F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1001F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1023F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1201F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1223F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1401F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1423F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1623F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B6-1801F* | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B6-1823F* | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MK7ATIS 002EL | ADAPTER-TIRE INFLATION/DEFLATION | 3 | |
| MK7ATIS-002EL | ADAPTER - TIRE INFLATION/DEFLATION | 3 | |
| MK7ATISGBC-GH | ADAPTER - TIRE INFLATION/DEFLATION | 4 | |
| MLGFB737NG | ADAPTER KIT MLG B737NG-600 TO 900 | 2 | |
| MLGFB737NG-MAX | ADAPTER KIT MLG B737 MAX-7/-8/-9 | 1 | |
| MMG060-01 | ADAPTER FOR PRESSURE GREASING(TO-27-349) | 1 | |
| MMG060-05 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-12 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-19 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-32 | ADAPTER - BEARINGS PRES GREASING | 1 | |
| MMG060-33 | ADAPTER FOR PRESSURE GREASING(TO-27-349) | 1 | |
| MODEL 801600 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | 1 | |
| MODEL 80I-600 | AMP-CLAMP ADAPTER, AC CURRENT | 1 | |
| MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | 1 | |
| MODEL Y8100 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | 1 | |
| MODEL884FY-23 | ADAPTER KIT, PITOT-STATIC TUBE PRESSURE TEST. | 1 | |
| MOSW-C122D002B-M101-Z05 | MOSW-C122D002B-M101-Z05;Dual 2Dx2 SM Switch with Bulkhead Connectors duplex SC adapters | 1 | |
| MP-06 | WRENCH ADAPTER (3/16-4,8 MM) | 1 | |
| MP-07 | WRENCH ADAPTER (7/32-5,6 MM) | 1 | |
| MP-08 | WRENCH ADAPTER (1/4-6,4 MM) | 1 | |
| MPPBF-8 | NOSE ADAPTER MPPBF-8 | 1 | |
| MQ4-120 | RADAR COOLING INLET PLUG (MQ4-AARSS) ADAPTER, JACK PAD, NSN: 1560-01-659-4947 | 1 | |
| MS-15X-S1 (DINO-LITE) | MULTI-PUROSE ADAPTER; XY STAGE WITH 360 DEGREE ROTATING TURNTABLE | 1 | |
| MS15X | MULTI-PUROSE ADAPTER; XY STAGE WITH 360 DEGREE ROTATING TURNTABLE | 1 | |
| MS17984C404 | TRANSPORTATION ADAPTER ENGINE REMOVE-INSTALL | 1 | |
| MS21902J4 | ADAPTER M-M7/16 | 8 | |
| MS21915J5-4 | ADAPTER M7/16 - F1/2 | 1 | |
| MS21915J6-4 | ADAPTER M9/16 - F7/16 | 1 | |
| MS21916J4-3 | ADAPTER M7/16 - M3/8 | 1 | |
| MS21916J5-4 | ADAPTER M7/16-M1/2 | 1 | |
| MS21916J6-4 | ADAPTER M7/16-M9/16 | 1 | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 2 | |
| MS24203-1 | ADAPTER MS24203-1 MILITARY DEPARTMENTS | 12 | |
| MS27404-3D | ADAPTER - SPLINE CAVITY | 2 | |
| MS28889-2 | ADAPTER MS28889-2 / MINIMESS 1615 | 14 | |
| MS4001645-1 | PRESSURE CHUCK ADAPTER RESERVOIR FWD-AFT SLIDE PN 4A3904 SERIES | 1 | |
| MS4001671-1 | PRESSURE CHUCK ADAPTER MID SLIDE PN 66898-101/102 | 1 | |
| MS4001672-1 | PRESSURE CHUCK ADAPTER OFF WING SLIDE PN 60592-SERIES | 1 | |
| MS4001675-1 | PRESSURE CHUCK ADAPTER COB PN B42365-1 | 1 | |
| MS4001676-1 | PRESSURE CHUCK ADAPTER COB PN 806835-01 | 1 | |
| MSWS-A2DM-AC918 | MSWS-A2DM-AC918;mSWS Quad Detector Module with 4 LC power meter adapters | 1 | |
| MT0011 | TORQUE ADAPTER - FIREWALL, CONNECTOR | 12 | |
| MT133-9 | ADAPTER ASSEMBLY (OR LYCOMING ST-71-8) | 2 | |
| MultiRAE PGM-6228 | multigas monitor for PID 10.6eV lamp 0.1-5000ppm, LEL, & O2, non-wireless, Extended - duration Li-ion rechargeable battery with alkaline adapter," | 1 | |
| N-2055-25 | REDUCER ADAPTER (20-16) | 1 | |
| N/A | ADAPTER FOR STARTER DUCT CFM56-3 | 5 | |
| N16C-P2D-B | Adapter; 12-pin Lemo to 16 Pin Lemo cable connector, Phasec P2D/P3D to Nortec 1000/2000, BRIDGE | 1 | |
| N16C-P2D-R | Adapter; 12-pin Lemo to 16 Pin Lemo cable connector, Phasec P2D/P3D to Nortec 1000/2000, Reflection | 1 | |
| N16C-Z21-B | Adapter; 4 Pin-Fischer to 16 Pin Lemo cable connector | 1 | |
| N2966100 | BORESCOPE -TIP ADAPTER | 2 | |
| N2966200 | BORESCOPE -TIP ADAPTER | 1 | |
| N2966300 | BORESCOPE -TIP ADAPTER | 2 | |
| N2966400 | SIDE VIEWING , 120 DEGREE FIELD OF VIEW TIP ADAPTER DEPTH OF FIELD 6 - INFINIY MM | 1 | |
| N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | 1 | |
| N4148800 | AT120D/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. 2,275.00 2,275.00 - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 2 - 200MM - 1 YEAR WARRANTY | 2 | |
| N4148900 | AT120D/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 17 - MM - 1 YEAR WARRANTY | 2 | |
| N4149000 | AT100S/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 2 - 15MM - 1 YEAR WARRANTY | 1 | |
| N4149300 | AT80D/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING | 1 | |
| N4149400 | AT120D/NF-IV96N IPLEX NX TIP ADAPTER | 2 | |
| N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
| NB2604-5A | IN-LINE PUSH-ON TYRE VALVE ADAPTER, FOR LARGE-BORE 12V TYRE VALVE STEMS (FOR FITMENT TO TYRE PRESSUR | 1 | |
| NB2604-6A | IN-LINE PUSH-ON TYRE VALVE ADAPTER, FOR SMALL-BORE 8V TYRE VALVE STEMS (FOR FITMENT TO TYRE PRESSURE | 1 | |
| NB2903-4 | FEMALE QUICK-FIT ADAPTER | 1 | |
| NB307010 | SMALL 8V SCREW-ON INFLATION ADAPTER WITHOUT HOSE | 3 | |
| NB307010-2M | INFLATION HOSE WITH SMALL 8V SCREW-ON INFLATION ADAPTER | 2 | |
| NB3070210-2M | HOSE - VALVE ADAPTER TYRE INFLATION HOSE VALVE ADAPTOR | 1 | |
| NB30710 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 1 | |
| NB307100 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 2 | |
| NB4504-D | GAGE - PRESSURE, TIRE 2 X INLINE ADAPTERS FOR SMALL 8V & LARGE 12V SIZE VALVES | 1 | |
| NB485010 | LARGE 12V SCREW-ON INFLATION ADAPTER | 4 | |
| NB485010-2M | INFLATION HOSE WITH LARGE 12V SCREW-ON INFLATION ADAPTER | 3 | |
| NB485100-2M | INFLATION HOSE WITH LARGE 12V SCREW-ON INFLATION ADAPTER (LONG REACH ADAPTER) | 1 | |
| NGC-4500-6ACH2 | NGC-4500-6ACH2;WX4500 Cat6A Channel Adapter Pair | 1 | |
| NGC-4500-6ALINT1 | NGC-4500-6ALINT1;WX4500 Cat6A Permanent Link Interface Adapter | 1 | |
| NGC-4500-COAX | NGC-4500-COAX;NGC-4500 Coax Adapter Pair _75 ohm F-Type Interface | 1 | |
| NGC-4500-EF-MM1 | NGC-4500-EF-MM1;NGC-4500 Encircled Flux MultiMode Adapter | 1 | |
| NGC-4500-EF-MM1-ENC | NGC-4500-EF-MM1-ENC;NGC-4500 Encircled Flux MultiMode Adapter - Encore | 1 | |
| NGC-4500-EFLC-ADAPT | NGC-4500-EFLC-ADAPT;Two Interchangeable LC Adapters for RX Ports on Fiber Modules | 1 | |
| NGC-4500-EFLC-KIT | NGC-4500-EFLC-KIT;Encircled Flux MultiMode Add-On Kit for NGC-4500_includes two EF MMF Adapters/SC and LC TRCs | 1 | |
| NGC-4500-FA-AU | NGC-4500-FA-AU;Certifier40G Class FA Copper Kit (Class FA Adapters Not Included) with Australian Power Cord | 1 | |
| NGC-4500-FA-EU | NGC-4500-FA-EU;Certifier40G Class FA Copper Kit - Class FA Adapters Not Included - with European Power Cord | 1 | |
| NGC-4500-FA-NA | NGC-4500-FA-NA;Certifier40G Class FA Copper Kit (Class FA Adapters Not Included) with NA Power Cord | 1 | |
| NGC-4500-FA-UK | NGC-4500-FA-UK;Certifier40G Class FA Copper Kit (Class FA Adapters Not Included) with UK Power Cord | 1 | |
| NGC-4500-M12 | NGC-4500-M12;M12 Channel Adapter Pair for Certifier 40G | 1 | |
| NGC-4500-MPO-PM | NGC-4500-MPO-PM;MPO Power Meter Adapter for NGC-4500 | 1 | |
| NGC-4500-MPO-S | NGC-4500-MPO-S;MPO Light Source Adapter for NGC-4500 | 1 | |
| NGC-4500-PWRAD | NGC-4500-PWRAD;Power Adapter for WX4500 | 1 | |
| NGC-4500-SM2 | NGC-4500-SM2;NGC-4500 Certifier40G Singlemode Adapter Kit for Certification Testing At 1310nm and 1550nm Wavelengths | 1 | |
| NGC-CAT6APLUS-CH1 | NGC-CAT6APLUS-CH1;Single Enhanced Channel adapter for NGC | 1 | |
| NGC-CAT6APLUS-PL1 | NGC-CAT6APLUS-PL1;Single Enhanced Link adapter for NGC | 1 | |
| NGC-IND-ETH-E2E-KIT | NGC-IND-ETH-E2E-KIT;Certifier Adapter Kit for Industrial Ethernet End-to-End testing | 1 | |
| NLGFB737NG-MAX | ADAPTER KIT NLG B737NG-600 TO 900 | 1 | |
| NSC-ETHERNET-ADAPTER | NSC-ETHERNET-ADAPTER;Ethernet Cat6a M-F Adapter Cable - 0.5m/1.5ft | 1 | |
| NTG2604-S | AIRCRAFT TYRE PRESSURE CHECKING GAUGE, 0-260 PSI, CALIBRATED, WITH SMALL-BORE 8V VALVE ADAPTER | 5 | |
| NTGPC-002 | END ADAPTER - TYRE PRESS. GAUGE | 1 | |
| O118233 | ADAPTER, LIFTING -OBIGGS | 1 | |
| O2N2FP0039 | CHARGE ADAPTER -OXYGEN | 1 | |
| OFA | Oxygen Fill Adapter - New | 1 | |
| OFCA3HDKT | 73MM-153MM SPIDER FW W ADAPTER | 1 | |
| OFCADPTR | ADAPTER 3/8" TO 1/2" SNAP-ON | 1 | |
| OHME65B81110-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP | 1 | |
| OHME65B81111-3 | ADAPTER - HOISTING, POWER UNIT, OUTBOARD TRAILING EDGE FLAP | 1 | |
| OLP-35SC | OLP-35SC;OLP-35SC - Broadband Power Meter with fixed SC Adapter - Bundle | 1 | |
| OLP35-LMR | OLP35-LMR;OLP-35 Broadband Optical PM with 2.5 and 1.25mm optical adapters with USB | 1 | |
| OMNI-A-ADP21 | BONDMASTER PITCH-CATCH PROBE ADAPTER | 1 | |
| OMP2505-3 | ADAPTER - HOSE OUTLET | 12 | |
| OMP2506-3 | ADAPTER - INLET | 22 | |
| ONX-2XX-PWR-ADPT-VEH | ONX-2XX-PWR-ADPT-VEH;OneExpert 2XX - Vehicle Power Adapter | 1 | |
| ONX-2XX-PWR-ADPT-WALL | ONX-2XX-PWR-ADPT-WALL;OneExpert 2XX - Power Adapter with International Power Plugs | 1 | |
| P039978 | CABLE - ADAPTER | 2 | |
| P10199-03 | ADAPTER, SMA TO OPM4-2D | 1 | |
| P14789-4 | ADAPTER - PITOT | 8 | |
| P15589M1-3 | ADAPTER - PITOT TEST | 6 | |
| P15589M1-4 | PITOT-STATIC ADAPTER TOOL | 2 | |
| P204-30HVPZT | BNC - ADAPTER | 1 | |
| P22201-4 | Barfield P22201-4 Pitot Static Adapter | 5 | |
| P22942M1-4 | Barfield P22942M1-4 Pitot Static Adapter, For Falcon Aircraft | 7 | |
| P29932-4 | Barfield P29932-4 Pitot Mast Static Adapter | 4 | |
| P2KABF02 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 6 | |
| P40951M-3 | PITOT TEST ADAPTER, HAWKER HS-125 600-900 | 2 | |
| P40951M-4 | Pitot tube adapter for Hawker HS125-600/700 & 800 | 1 | |
| P62261M-3 | Pitot Test Adapter - SH60B/S70 | 5 | |
| P62261M-4 | ADAPTER - PITOT PROBE | 5 | |
| P63307M1-4 | ADAPTER, PITOT (OR EQUIVALENT) NAV AIDS LTD P63307M1-3 OR 36122 | 1 | |
| P75400M-3 | ADAPTER - PITOT TEST | 1 | |
| P75400M-4C | ADAPTER - PITOT TEST | 3 | |
| P75701-3 | Barfield P75701-3 Static Test Adapter, For Boeing, Cirrus Hawker and Fixed Wing Aircraft | 10 | |
| P75701-4 | Barfield P75701-4 Static Test Adapter, For Dornier and Airbus | 14 | |
| P75701-4C | ADAPTER-PITOT PROBE | 13 | |
| P757014C | ADAPTER-PITOT PROBE | 13 | |
| P75701HT-4 | ADAPTER - TEST, ELEVATOR FEEL (INCLUDED IN AIR DATA ACCESSORY KIT | 1 | |
| P75701M2 | ADAPTER - PITOT TEST | 1 | |
| P75701M2-3 | ADAPTER-PITOT PROBE | 11 | |
| P75701M23 | PITOT ADAPTER HIGH TEMP FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 11 | |
| P77796HT-3 | ADAPTER-777 | 5 | |
| P80128-4 | PITOT TEST ADAPTER - FOKKER | 4 | |
| P86892-3 | ADAPTER: PITOT STATIC, AERO 560 /CESSNA - VARIOUS | 3 | |
| P96255-3 | Barfield P96255-3 Pitot Static Adapter, For Cessna Single Engine and Cessna Aircraft | 4 | |
| PC-100-6 | ADAPTER-OXY CHARGING | 19 | |
| PC-1006 | ADAPTER - OXYGEN CHARGING | 19 | |
| PC-1007 | TRONAIR PC-1007 HIGH PRESSURE ADAPTER | 6 | |
| PC-1009 | OXYGEN CHARGE ADAPTER (OUTLET: 9/16-18UNF) | 5 | |
| PC-1011 | TRONAIR PC-1011 – HIGH-PRESSURE NITROGEN ADAPTER – MAX. 3,000 PSI / .305-32 TO -03 JIC FLARE | 7 | |
| PC1006 | ADAPTER - OXYGEN CHARGING | 19 | |
| PDL-AP-01-BG-F | PDL-ADAPTER | 1 | |
| PE9002 | ADAPTER FOR PV-017 | 1 | |
| PE9090 | ADAPTER FOR PV-017 | 1 | |
| PE9538 | ADAPTER - RF, TYPE N(M) TO TYPE C(M), 50 OHM | 1 | |
| PE9539 | ADAPTER - RF, TYPE N(F) TO TYPE C(F), 50 OHM | 1 | |
| PE9801 | COAX. ADAPTER, 8.2 GHZ - 12.4 GHZ | 1 | |
| PF53175 | ADAPTER - SPLINE CAVITY | 3 | |
| PF53481-9P | CART, SERVICE - LANDING GEAR STRUT (5 GAL CAPACITY WITH HANDPUMP, HOSE, AND GRAVITY FILL ADAPTER) (MALABAR INTERNATIONAL) | 6 | |
| PF55759 | GRAVITY FILL ADAPTER (FOR PF53361-2PWS) | 3 | |
| PFS777-1 | Adapter - Precooler Maintenance | 1 | |
| PL-13997 | ADAPTER - LOAD POSITIONER | 1 | |
| PPK3706 | K-3706 HIGH PRESSURE CONNECTOR AIRCRAFT GOOSE NECK STRUT SERVICE ADAPTER | 1 | |
| PRESSURE REGULATOR, 0 - 5 PSI | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| PS22203M-3-4 | ADAPTER: STATIC,PITOT,STANDBY - Dash 8-400 / Q400 | 5 | |
| PS44129-4-6 | Barfield PS44129-4-6 Pitot Test Adapter, For Agusta Aircraft | 4 | |
| PS47699-3-4 | Barfield PS47699-3-4 Pitot Static Adapter | 5 | |
| PS49742M-4-4 | PITOT STATIC ADAPTER DA-42 | 5 | |
| PS49742M3-4 | Barfield PS49742M3-4 Pitot Adapter, For Piper Aerostar and Piper Aztec Aircraft | 4 | |
| PS49742M4-4 | Barfield PS49742M4-4 Pitot Test Adapter, For Aircraft | 5 | |
| PS56620-4-4 | PITOT TEST ADAPTER DA42 NO DE-ICE | 4 | |
| PS56620M2-4-4 | Barfield PS56620M2-4-4 Pitot Static Adapter, For Piper Arrow and Piper Seminole Aircraft | 5 | |
| PS6-80000-00 | T2195 SJB TEST BOX WITH 100-240V AC TO 9V DC 1.2A, 10,8W POWER ADAPTER | 1 | |
| PS99016-4-6 | KC-135 PITOT STATIC ADAPTER | 1 | |
| PSD40-502 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
| PSD40-502-1 | ADAPTER FUEL QTY TEST - BOEING | 2 | |
| PSD40-502-3 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
| PSD40-503 | ADAPTER FUEL QTY TEST - BOEING | 2 | |
| PSD40-524B | ADAPTER - CABLE, FQIS | 1 | |
| PSD60-503 | ADAPTER FUEL QTY TEST - BOEING | 7 | |
| PSD60-504 | ADAPTER FUEL QTY TEST - BOEING | 9 | |
| PSD737-1 | ADAPTER CABLE - FQIS TESTER | 9 | |
| PSD737-2 | ADAPTER CABLE - FQIS TESTER | 6 | |
| PSD747-20 | HARNESS ADAPTER-FQIS TESTER INTERCONNECT | 1 | |
| PSD747-22 | HARNESS ADAPTER - FQIS INTERCONNECT | 1 | |
| PSD747-23 | ADAPTER HARNESS-FQIS DENSITOMETER | 1 | |
| PSDAF-C130A | ADAPTER CABLE FOR PSD90-1C TESTER | 2 | |
| PSDAF-C130D | ADAPTER CABLE FOR PSD90-1C TESTER | 1 | |
| PSDAF-C130I | ADAPTER CABLE FOR PSD90-1C TESTER | 1 | |
| PSDAF-C130T | ADAPTER CABLE FOR PSD90-1C TESTER | 1 | |
| PSDF4600-57 | VACUUM ADAPTER-CENTRAL VAC | 1 | |
| PSS22300-3-4-4 | ADAPTER - PITOT TEST | 10 | |
| PSS22300-3-44 | ADAPTER - PITOT TEST | 10 | |
| PSS44600M2-3-4-4 | ADAPTER - PROBE PITOT STATIC (SPL-5292) | 6 | |
| PSS44600M344 | ADAPTER - PROBE PITOT STATIC | 4 | |
| PSS60615M1-4-6-6 | TEST ADAPTER,PITOT-DUAL STATIC | 3 | |
| PSS73259-3-4-4 | Barfield PSS73259-3-4-4 Pitot Static Adapter | 5 | |
| PSS76700-3-4-4 | PITOT-STATIC ADAPTER | 6 | |
| PSS76700M2-3-4-4 | PITOT-STATIC ADAPTER | 6 | |
| PSS76700M22-3-4-4 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| PSS88139-3-4-4 | Barfield PSS88139-3-4-4 Pitot Static Adapter, For Agusta Aircraft | 4 | |
| PSS88340-3-4-4 | ADAPTER, ADA340-612 | 5 | |
| PT11558M1 | Pre-Test Adapter | 1 | |
| PT14097 | ADAPTER: PITOT,PRE-TEST, | 2 | |
| PT19625 | ADAPTER: PITOT,PRE-TEST, | 2 | |
| PT421-418 | ADAPTER: PRE-TEST,AL, | 3 | |
| PW103574 | ADAPTER-R/I FAN CASE | 1 | |
| PW4000-94 (Bootstrap adapter) | PW4000-94 (Bootstrap adapter) | 1 | |
| PWA 101618 | ADAPTER - HYDRAULIC PUMP | 4 | |
| PWA 102830 | ADAPTER - ANGLE GEARBOX | 1 | |
| PWA 103574 | ADAPTER-R I FAN CASE | 1 | |
| PWA 115399 | ADAPTER, LIFTING PLATE - IDG | 3 | |
| PWA 25026 | ADAPTER 1 JT9D-7Q | 2 | |
| PWA 25741 | ADAPTER-STATIC BALANCE DISK | 2 | |
| PWA 26873 | ADAPTER-LPC | 2 | |
| PWA 27733 | ADAPTER-STATIC BAL | 2 | |
| PWA 28024 | ADAPTER-RING | 1 | |
| PWA 45849 | ADAPTER. ANTI-ROTATION | 3 | |
| PWA 45933 | ADAPTER. ANTI-ROTATION | 3 | |
| PWA 76154 | ADAPTER-LIFT AND TURN(2 INCH SPOOLS) | 5 | |
| PWA 80230 | ADAPTER, PEDESTAL - ADJUSTABLE | 4 | |
| PWA 80577 | ADAPTER-STAND | 1 | |
| PWA 83101 | ADAPTER - TORQUE, GEARBOX OIL LUBE AND SCAVENGE COVER | 3 | |
| PWA 85791 | ADAPTER, COUNTER-TORQUE | 1 | |
| PWA 86458 | ADAPTER - PUMP | 1 | |
| PWA 86621 | ADAPTER, REDUCER WRENCH - TORQUE | 2 | |
| PWA 88603 | ADAPTER-R/I FAN CASE | 1 | |
| PWA101181 | ADAPTER HOLDING-MAIN GEARBOX | 1 | |
| PWA101618 | ADAPTER-ACTUATOR 2.5 BLEED VALVE | 4 | |
| PWA102093 | ADAPTER-DRIVE ENGINE TURNING, BORESCOPE | 1 | |
| PWA102285 | ADAPTER - TORQUE, IDG AIR/OIL COOLER SUPPORT BRACKET | 1 | |
| PWA102390 | ADAPTER - DRIVE ENGINE TURNING, BORESCOPE | 1 | |
| PWA102830 | ADAPTER-REMOVAL HOUSING AND STRAINER ASSY | 1 | |
| PWA103488 | ADAPTER - LEAK TEST | 1 | |
| PWA103574 | ADAPTER-R I FAN CASE | 1 | |
| PWA103668 | ADAPTER - VACUUM CHECK | 1 | |
| PWA10408 | ADAPTER - ROTOR TUNING TOOL | 6 | |
| PWA104631 | ADAPTER - FUEL FLOWMETER OUTLET | 1 | |
| PWA104632 | ADAPTER - FUEL PUMP INLET | 1 | |
| PWA105056 | ADAPTER-DRIVE, BORESCOPE INSPECTION | 1 | |
| PWA105136 | ADAPTER - TORQUE, RADIAL DRIVE UNIT - PW2000 ENGINES | 1 | |
| PWA105266 | ADAPTER - VACUUM CHECK | 1 | |
| PWA105267 | ADAPTER - LEAK TEST | 1 | |
| PWA105274 | ADAPTER-R I IDG | 1 | |
| PWA105706 | ADAPTER-LIFT AND TURN,FAN CONTAINMENT CASE | 1 | |
| PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | 1 | |
| PWA106305 | ADAPTER,TORQUE-EEC ALTERNATOR | 1 | |
| PWA106415 | ADAPTER, LEAK TEST - OIL SYSTEM | 1 | |
| PWA106473 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA106491 | ADAPTER,DRIVE-BORESCOPE | 1 | |
| PWA106492 | ADAPTER,OFFSET-BORESCOPE | 1 | |
| PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | 1 | |
| PWA107125 | ADAPTER-OIL DRAIN, ENGINE ASSEMBLY | 1 | |
| PWA107602 | ADAPTER, TORQUE - ENGINE, AFT DRAIN MAST | 1 | |
| PWA107715 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | 1 | |
| PWA107733 | ADAPTER-VACUUM CHECK | 1 | |
| PWA109773 | AIRFLOW ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
| PWA111018 | ADAPTER SUPPORTLIFT - ENGINE FAN | 3 | |
| PWA111443 | ROTATOR ADAPTER - ENGINE ASSY, BORESCOPE | 4 | |
| PWA111484 | ADAPTER ANTI-TORQUE | 1 | |
| PWA115399 | ADAPTER, LIFTING PLATE - IDG | 3 | |
| PWA12210 | ADAPTER - JT8D, #1 BRG OIL | 7 | |
| PWA12386 | JT8D DE-PRESERVATION ADAPTER | 3 | |
| PWA12443 | ADAPTER-HPT SHAFT | 5 | |
| PWA15376 | TF33/JT3 VANE STAGE 1 - ADAPTER, LOCATOR (PRELIMINARY) | 1 | |
| PWA15559 | TF33/JT3 VANE STAGE 3 - ADAPTER, LOCATOR | 1 | |
| PWA15564 | TF33/JT3 VANE STAGE 4 - ADAPTER, LOCATOR | 1 | |
| PWA15678 | TF33/JT3 VANE STAGE 2 - ADAPTER, LOCATOR (PRELIMINARY) | 1 | |
| PWA20333 | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | 1 | |
| PWA20333 REV A | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | 1 | |
| PWA211305 | ADAPTER HANDLING - MAIN GEARBOX ASSEMBLY | 2 | |
| PWA211308 | LEAK CHECK ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
| PWA211314 | ADAPTER, INSTALLATION -SCAVENGE OIL PUMP | 2 | |
| PWA211413 | ADAPTER ANTI-TORQUE (NEO) | 1 | |
| PWA211435 | ADAPTER, TORQUE - PMA ROTOR | 4 | |
| PWA211825 | ADAPTER, REMOVER - ENGINE | 4 | |
| PWA212262 | ADAPTER, REMOVER - IGNITER | 3 | |
| PWA212369 | TORQUE ADAPTER (LP35)- ANGLE GEARBOX | 3 | |
| PWA212464 | AIRFLOW ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
| PWA24524 | ADAPTER-ACTUATOR 2.5 BLEED VALVE | 10 | |
| PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
| PWA25207 | ADAPTER, CONNECTING - AGB TO STAND_[PWA25207] | 1 | |
| PWA25256 | ADAPTER - AGB OIL FLOW TEST OUTER HOUSE_[PWA25256] | 2 | |
| PWA25261 | ADAPTER - OIL FLOW, AGB OIL FLOW JET CVR_[PWA25261] | 2 | |
| PWA25270 | ADAPTER - AGB BACKLASH CHECK_[PWA25270] | 2 | |
| PWA25278 | ADAPTER, CONNECTING - G/B TO STAND_[PWA25278] | 2 | |
| PWA25361 | ADAPTER - DIFFUSER CASE TO STAND_[PWA25361] | 1 | |
| PWA25414 | ADAPTER - HPC FRONT BAL BRG SLEEVE NUT_[PWA25414] | 2 | |
| PWA25444 | ADAPTER - T/S/COUPLING OUTER RACE NUT_[PWA25444] | 2 | |
| PWA25446 | ADAPTER - T/S/COUPLING OUTER RACE WR_[PWA25446] | 2 | |
| PWA25497 | POST & INDICATOR ADAPTER - HPC ROTOR_[PWA25497] | 1 | |
| PWA25553 | ADAPTER - OIL FLOW, #4 BRG NOZZ_[PWA25553] | 2 | |
| PWA25565 | ADAPTER - HPC LIFT & TURN REAR HUB_[PWA25565] | 2 | |
| PWA25569 | ADAPTER, CONC. CHK - BRG, BAL REAR RACE_[PWA25569] | 1 | |
| PWA25570 | ADAPTER, CONC. CHK - BRG, BAL. OUTER RAC_[PWA25570] | 1 | |
| PWA25577 | ADAPTER, WEIGHT - HPC BAL BRG INR RACE_[PWA25577] | 2 | |
| PWA25578 | ADAPTER, WEIGHT - HPC, BAL BRG WT OUTR_[PWA25578] | 1 | |
| PWA25612 | ADAPTER,TORQUE WRENCH - LPC FLANGE_[PWA25612] | 1 | |
| PWA25741 | ADAPTER-STATIC BALANCE DISK_[PWA25741] | 2 | |
| PWA25779 | ADAPTER - PRIMARY FUEL MANIFOLD INLET_[PWA25779] | 1 | |
| PWA25780 | ADAPTER - SECONDARY FUEL MANIFOLD INLET_[PWA25780] | 1 | |
| PWA25798 | ADAPTER - IMC INLET VANE_[PWA25798] | 1 | |
| PWA25926 | ADAPTER-ENG ASSY SUPPORT PEDESTAL_TO HOLD ENG HORIZONTALLY ASSY/DIS-ASSY_1397 X 610 X 610 / 31.8 KG_[PWA25926] | 4 | |
| PWA26147 | ADAPTER - LIFT & TRUNNION(2 INCH SPOOLS)_[PWA26147] | 2 | |
| PWA26147A | ADAPTER, LIFT & TRUNNION - HPC_[PWA26147A] | 1 | |
| PWA26204 | ADAPTER, REMOVAL - TEC NO.4 BRG REPLC_[PWA26204] | 2 | |
| PWA26206 | ADAPTER, PLATE - HPC FRT HUB CLAMP_[PWA26206] | 1 | |
| PWA26246 | ADAPTER,LOCATING - HPC CASE & STATORS_[PWA26246] | 1 | |
| PWA26311 | ADAPTER - REM/INST, FAN ROTOR ASSY_[PWA26311] | 1 | |
| PWA26359 | ADAPTER, INSP - NO.2 BRG INTERNAL_[PWA26359] | 1 | |
| PWA26360 | ADAPTER - #1 BRG INTERNAL RADIAL CLR INS_[PWA26360] | 1 | |
| PWA26486 | ADAPTER,LIFTING - TURB ROTOR 2ND STG_[PWA26486] | 2 | |
| PWA26487 | ADAPTER,LIFTING - TURB ROTOR 1ST STG_[PWA26487] | 1 | |
| PWA26871 | ADAPTER - TURBINE SHAFT FRONT FLANGE | 2 | |
| PWA26872 | ADAPTER-TURBINE SHAFT FRONT FLANGE | 3 | |
| PWA26873 | ADAPTER - FLANGE, LPC DRIVE TURB SHAFT_[PWA26873] | 2 | |
| PWA26999 | ADAPTER - DISK PRESS_[PWA26999] | 1 | |
| PWA27017 | ADAPTER - LPT AIR SEAL BALANCE_[PWA27017] | 1 | |
| PWA27250 | ADAPTER - GEAR BOX NOZZLE OIL FLOW | 2 | |
| PWA27251 | ADAPTER - OIL FLOW, GEARBOX NOZZLE_[PWA27251] | 2 | |
| PWA27263 | ADAPTER - CONTACT ANGLE, BRG #1 CONT_[PWA27263] | 1 | |
| PWA27264 | ADAPTER, INSP - #2 BRG SPACER MEASURET_[PWA27264] | 1 | |
| PWA27274 | ADAPTER - WRENCH, FRT COMP DRIVE_[PWA27274] | 2 | |
| PWA27403 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27403] | 1 | |
| PWA27405 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27405] | 1 | |
| PWA27406 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27406] | 1 | |
| PWA27407 | ADAPTER, BRG - LPC BAL ARBOR INN RACE_[PWA27407] | 1 | |
| PWA27408 | ADAPTER, INSP - LPC BAL ARBOR OUTR RACE_[PWA27408] | 1 | |
| PWA27466 | ADAPTER, RETAINING - LPT FRONT RETAINER_[PWA27466] | 2 | |
| PWA27508 | HUB - FAN ROTOR ADAPTER REM,INST_[PWA27508] | 1 | |
| PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
| PWA27618 | ADAPTER,CONNECTING - DIFF CASE_[PWA27618] | 1 | |
| PWA27648B | ADAPTER - REAR COMPRSR REAR RETAINER_[PWA27648B] | 1 | |
| PWA27704 | ADAPTER, BRG - REAR COMP REAR BAL FIX_[PWA27704] | 2 | |
| PWA27726A | ADAPTER, STATIC BAL - HPC 12TH STAGE_[PWA27726A] | 1 | |
| PWA27733 | ADAPTER - STATIC BAL. 5TH TURB ASSY_[PWA27733] | 2 | |
| PWA27735 | RING, ADAPTER - REAR COMP DR TEC REAR_[PWA27735] | 1 | |
| PWA27755 | ADAPTER, LIFTING - 1ST TURB ROTOR ASSY_[PWA27755] | 2 | |
| PWA27759 | ADAPTER, LIFTING - 2ND STG TURB ROTOR_[PWA27759] | 2 | |
| PWA27774 | PLATE, ADAPTER - 1ST STG TURB ROTOR_[PWA27774] | 1 | |
| PWA27777 | PLATE, ADAPTER - TURB DISK & BLADE RIV_[PWA27777] | 2 | |
| PWA27830 | ADAPTER, LIFT & TURN - LPC 4TH D&BLADE_[PWA27830] | 1 | |
| PWA27869 | ADAPTER, INDICATOR - FRT COMP DR TURB_[PWA27869] | 1 | |
| PWA27889 | ADAPTER,PLATE - FRT COMP DISK TABLOCK_[PWA27889] | 2 | |
| PWA27893 | ADAPTER,PLATE - LPC 3RD STG BLD TABLOCK_[PWA27893] | 2 | |
| PWA27895 | ADAPTER,PLATE - LPC 4TH BLADE TABLOCK_[PWA27895] | 2 | |
| PWA27917 | ADAPTER, PLATE - LPC BLADE TABLOCK_[PWA27917] | 2 | |
| PWA27940 | ADAPTER - AIR LEAK TEST_[PWA27940] | 1 | |
| PWA27941 | ADAPTER - AIR LEAK TEST_[PWA27941] | 2 | |
| PWA28106 | ADAPTER, HYD HOSE - ENG RIGGING_[PWA28106] | 5 | |
| PWA28940 | ADAPTER-TORQUE 3.0 BLEED VALVE CONTROL FEEDBACK LEVER | 5 | |
| PWA28954A | ADAPTER - LIFT & TURN, LPC 2ND STG DISK_[PWA28954A] | 1 | |
| PWA29237 | ADAPTER-R I COMPRESSOR ROTOR 1ST STAGE | 2 | |
| PWA29328 | ADAPTER HANDLING-FUEL CONTROL-FUEL PUMP ASSY | 1 | |
| PWA29330 | ADAPTER-R I COMPRESSOR ROTOR 1ST STAGE | 1 | |
| PWA29370 | ADAPTER-LEAK CHECK ENGINE BREATHER TUBE TO AIR SUPPLY | 1 | |
| PWA29388 | ADAPTER - HPC REAR HUB TO STAND_[PWA29388] | 2 | |
| PWA29447 | ADAPTER-INLET CONE(7Q ENG)_[PWA29447] | 1 | |
| PWA29451 | ADAPTER, HYD PUMP - VSV ACTUATOR_0.45KG / 32 X 32 X 65MM [PWA29451] | 7 | |
| PWA29602 | ADAPTER-ROTATING #2 BRG_[PWA29602] | 1 | |
| PWA29667 | ADAPTER, DRAIN - FUEL SYSTEM DRAIN | 1 | |
| PWA29674 | ADAPTER-GRINDER | 2 | |
| PWA29989 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA45024 | MULIPLIER ADAPTER-ENGINE FRONT | 3 | |
| PWA45104 | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS | 1 | |
| PWA45104 REV B | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS | 1 | |
| PWA45210 | LPT PUSHER ADAPTER-CONNECT TO FAN | 1 | |
| PWA45232 | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER | 3 | |
| PWA45232 REV NC | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER | 1 | |
| PWA45532 | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION | 4 | |
| PWA45532 REV NC | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION | 1 | |
| PWA45849 | ANTI-ROTATION ADAPTER NO.2 BEARING | 3 | |
| PWA52747-16 | TOOTH,ADAPTER ANTI-TORQUE | 1 | |
| PWA7025-4 | WRENCH - IMC TORQ ADAPTER EXT, OUTER_[PWA7025-4] | 1 | |
| PWA75370 | ADAPTER,CLEANING-ENGINE ASSEMBLY,FUEL NOZZLE | 1 | |
| PWA75511 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA75574 | ADAPTER-LPT SHAFT REAR_[PWA75574] | 2 | |
| PWA76154 | ADAPTER-LIFT AND TURN(2 INCH SPOOLS) | 5 | |
| PWA76156 | LIFT & TURN ADAPTER - HPT RETAINER_TO ALLOW INS OF DYNAMOMETERS ON HPT_300 X 165 X 13 / 4.4 KG_[PWA76156] | 4 | |
| PWA76156 REV NC | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | 1 | |
| PWA76I56 | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | 1 | |
| PWA80005 | ADAPTER, PEDESTAL - ENGINE ASSEMBLY | 1 | |
| PWA80005 REV C | ADAPTER, PEDESTAL - ENGINE ASSEMBLY | 1 | |
| PWA8023 | ADAPTER, PEDESTAL - ADJUSTABLE | 1 | |
| PWA80230 | ADAPTER, PEDESTAL - ADJUSTABLE | 4 | |
| PWA80230 REV A | ADAPTER, PEDESTAL - ADJUSTABLE | 1 | |
| PWA80574 | ADAPTER - HANDLING, MAIN GEARBOX - PW2000 ENGINES | 1 | |
| PWA85248 | AIRFLOW TEST ADAPTER - TURBINE C/AIR | 1 | |
| PWA85433 | ADAPTER-FUEL PRESERVE,FUEL PUMP INLET | 7 | |
| PWA85436 | ADAPTER - TORQUE, BLEED VALVE (2.9) HPC | 1 | |
| PWA85451 | ADAPTER-FUEL PRESERVE,FUEL FLOWMETER OUTLET | 4 | |
| PWA85453 | ADAPTER - FUEL PRESERVATION , FUEL PUMP INLET | 2 | |
| PWA85478 | ADAPTER - VACUUM CHECK | 1 | |
| PWA85498 | ADAPTER,VACUUM CHECK-GEARBOX DEOILER OUTLET | 1 | |
| PWA85525 | ADAPTER, HOT OIL-OIL FOLTER HOUSING INLET | 1 | |
| PWA85526 | ADAPTER-HOT OIL-ENGINE ASSEMBLY | 1 | |
| PWA85579 | ADAPTER-LEAK TEST FUEL SYST DISTRIBUTION VALVE | 4 | |
| PWA85700 | ADAPTER - LEAK TEST, OIL SYSTEM STATIC | 1 | |
| PWA85749 | ADAPTER-TORQUE ELECTRONIC HARNESS CONNECTOR | 2 | |
| PWA85843 | ADAPTER-VACUUM CHECK-EXHAUST CASE OIL SCAVENGE | 1 | |
| PWA85844 | ADAPTER-LEAK TEST-ENGINE ASSY OIL SYST STATIC CHECK | 2 | |
| PWA85845 | ADAPTER-VACUUM CHECK-ENGINE ASSEMBLY GEARBOX | 1 | |
| PWA85853 | ADAPTER,TORQUE-ENGINE ASSY AIR OIL COOLER | 1 | |
| PWA85862 | ADAPTER-TORQUE FUEL PUMP RETAINING BOLT | 6 | |
| PWA85863 | ADAPTER - VACUUM CHECK | 1 | |
| PWA85928 | ADAPTER - TORQUE, 2.5 BLEED VALVE ACTUATOR SPL-2396 | 1 | |
| PWA86018 | ADAPTER-OIL SAMPLER ENGINE ASSY | 2 | |
| PWA86457 | ADAPTER-PUMP | 1 | |
| PWA86458 | ADAPTER - PUMP (POST-PW-SB 72-134) | 1 | |
| PWA86461 | ADAPTER-TORQUE FUEL PUMP RETAINING BOLT | 7 | |
| PWA86527 | ADAPTER-PUMP | 1 | |
| PWA86603 | ADAPTER-HOLDING PMA RETAINING NUT | 2 | |
| PWA86621 | ADAPTER REDUCER-HPC ASSY FLOW CONTROL INLET | 2 | |
| PWA87198 | ADAPTER,TORQUE-AIR/OIL COOLER, MOUNT BOLTS | 4 | |
| PWA88018 | ADAPTER-TORQUE WRENCH | 1 | |
| PWA88112 | ADAPTER, VACUUM CHECK - GEARBOX BREATHER | 1 | |
| PWA88125 | ADAPTER - N4 BEARING COMPARTMENT SCAVENGE TUBE | 1 | |
| PWA88603 | ADAPTER-R/I FAN CASE | 1 | |
| PWA88620 | ADAPTER - LIFT AND TRUNNION | 1 | |
| PWA88629 | ADAPTER,HOLDER-PMA RETAINING NUT | 1 | |
| PWA88732 | Adapter-Torque Tool | 1 | |
| PWC30256 | feeding adapter - Pratt & Whitney Canada | 3 | |
| PWC30393 | flow test adapter - Pratt & Whitney Canada | 4 | |
| PWC30409 | holding adapter - Pratt & Whitney Canada | 2 | |
| PWC30506 | RIG, FUEL MANIFOLD ADAPTERS - FLOW TEST | 6 | |
| PWC30530 | PLUG - FUEL MANIFOLD ADAPTER | 9 | |
| PWC30535 | flow adapter - Pratt & Whitney Canada | 3 | |
| PWC30649 | spacer adapter - Pratt & Whitney Canada | 2 | |
| PWC30712 | Adapter - Pratt & Whitney Canada | 6 | |
| PWC30831 | flow adapter - Pratt & Whitney Canada | 2 | |
| PWC31033 | ADAPTER, LPC RETAINING NUT (JT15D-1 SERIES, POST-SB7135 JT15D-4) | 1 | |
| PWC31280-202 | MEASURING ADAPTER - PRATT & WHITNEY CANADA | 3 | |
| PWC31280-302 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC31280-303 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC31280-355 | ADAPTER PWC31280-355 | 3 | |
| PWC31280-356 | ADAPTER PWC31280-356 | 3 | |
| PWC31280-401 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC31400 | ADAPTER, JT15D-4 SERIES FAN SHAFT (PRE-SB7135/PRE-SB7318) | 1 | |
| PWC31423 | ADAPTER, LIFTING SLING (CITATIONINSTALLED JT15D-4, -4B ONLY; POST- SB7158 | 1 | |
| PWC32094 | flow adapter - Pratt & Whitney Canada | 2 | |
| PWC32121 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC32209 | ADAPTER GRINDING - Pratt & Whitney Canada | 6 | |
| PWC32422 | anti-rotation adapter | 3 | |
| PWC32437 | Balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC32446 | balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC32459 | flow adapter - Pratt & Whitney Canada | 3 | |
| PWC32505 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC32550 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC32809 | holding adapter - Pratt & Whitney Canada | 2 | |
| PWC34126 | Anti-rotationN Adapter | 1 | |
| PWC34258 | Adapter - Pratt & Whitney Canada | 5 | |
| PWC34405 | FIXTURE, ADAPTER-FUEL MANIFOLD | 8 | |
| PWC34546 | Balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC34752 | ADAPTER MOUNT - Pratt & Whitney Canada | 7 | |
| PWC37077 | ADAPTER CARRIER - Pratt & Whitney Canada | 10 | |
| PWC37110 | holding adapter - Pratt & Whitney Canada | 5 | |
| PWC37138 | ADAPTER DISC - Pratt & Whitney Canada | 5 | |
| PWC37147 | ADAPTER DISC - Pratt & Whitney Canada | 4 | |
| PWC37267 | support adapter - Pratt & Whitney Canada | 2 | |
| PWC37322 | balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC37360 | holding adapter - Pratt & Whitney Canada | 1 | |
| PWC37368 | holding adapter - Pratt & Whitney Canada | 3 | |
| PWC37504 | measuring adapter - Pratt & Whitney Canada | 1 | |
| PWC37522 | adapter - Pratt & Whitney Canada | 1 | |
| PWC37540 | holding adapter - Pratt & Whitney Canada | 6 | |
| PWC37560 | measuring adapter - Pratt & Whitney Canada | 4 | |
| PWC37562 | measuring adapter - Pratt & Whitney Canada | 4 | |
| PWC37563 | measuring adapter - Pratt & Whitney Canada | 3 | |
| PWC37614 | pulling adapter - Pratt & Whitney Canada | 6 | |
| PWC37650 | holding adapter - Pratt & Whitney Canada | 3 | |
| PWC37728 | PULLER-INSTALL CHIP DETECTOR ADAPTER | 11 | |
| PWC37728/PHP | PULLER-INSTALL CHIP DETECTOR ADAPTER | 1 | |
| PWC37760 | pulling adapter - Pratt & Whitney Canada | 5 | |
| PWC37762 | adapter - Pratt & Whitney Canada | 2 | |
| PWC37796 | ADAPTER, NO. 3 BEARING RUNNER PULSE PICK-UP | 1 | |
| PWC37825 | lifting adapter - Pratt & Whitney Canada | 3 | |
| PWC37906 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC37990 | grinding adapter - Pratt & Whitney Canada | 4 | |
| PWC37994 | grinding adapter - Pratt & Whitney Canada | 2 | |
| PWC38001 | holding adapter - Pratt & Whitney Canada | 5 | |
| PWC38011 | Adapter (S) / ANTI-ROT. Adapter., ADAPTE | 1 | |
| PWC38147 | ADAPTER FITTING-DRA | 14 | |
| PWC38149 | Adapter, Anti-rotation, LP Impeller Retaining Nut (Post-SB20546) | 1 | |
| PWC38231 | holding adapter - Pratt & Whitney Canada | 3 | |
| PWC38247 | ADAPTER, ANTI-ROTATION, LP TURBINE | 5 | |
| PWC38290 | grinding adapter - Pratt & Whitney Canada | 6 | |
| PWC38307 | mount adapter - Pratt & Whitney Canada | 3 | |
| PWC38455 | ADAPTER-BALANCING | 1 | |
| PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | 1 | |
| PWC40181 | PLATE-ADAPTER | 1 | |
| PWC40259 | ADAPTER-HEAT GUN | 1 | |
| PWC40387 | PUSHER-ADAPTER | 1 | |
| PWC40430 | ADAPTER - STAND | 1 | |
| PWC40469 | Adapter - Pratt & Whitney Canada | 3 | |
| PWC40490 | ADAPTER-AGB,AIR STARTER | 1 | |
| PWC40580 | Adapter-SPLINE,GEARSHAFT | 1 | |
| PWC40703 | PUSHER-ADAPTER | 1 | |
| PWC40712 | DCU adapter cable - Pratt & Whitney Canada | 4 | |
| PWC40712-REVA1 | ADAPTER DCU 4 T-HARNESS | 1 | |
| PWC407121 | ADAPTER DCU 4 T-HARN | 1 | |
| PWC40781 | ADAPTER DYNO-TORQUE | 4 | |
| PWC40842 | ADAPTER-HEATING PLAT | 1 | |
| PWC40868 | ADAPTER-HPT | 1 | |
| PWC42041 | Adapter - Pratt & Whitney Canada | 3 | |
| PWC43262 | ADAPTER - FAN NUT | 3 | |
| PWC43266 | ADAPTER, ANTI-ROTATION | 2 | |
| PWC44062 | adapter - Pratt & Whitney Canada | 2 | |
| PWC44203 | ADAPTER ANTI-ROTATION | 1 | |
| PWC45314 | ADAPTER-PROPSHAFT | 1 | |
| PWC46491 | ADAPTER - MANIPULATOR | 1 | |
| PWC46575 | OVERHEAD LIFTING ADAPTER - HPT | 1 | |
| PWC46798 | ADAPTER - SHIPPING CRADLE | 1 | |
| PWC48118 | TORQUE ADAPTER-NUT | 2 | |
| PWC50055 | Adapter - Pratt & Whitney Canada | 5 | |
| PWC50058 | ADAPTER - IMPELLER BALANCING | 2 | |
| PWC50059 | Balancing adapter - Pratt & Whitney Canada | 2 | |
| PWC50096 | ADAPTER - BALANCING ROTOR | 1 | |
| PWC50216 | flow adapter - Pratt & Whitney Canada | 1 | |
| PWC50350 | Adapter - Balance Hydra. | 3 | |
| PWC50373 | Lifting adapter - Pratt & Whitney Canada | 4 | |
| PWC50429 | ADAPTER-TORQUING | 1 | |
| PWC50589 | Adapter - Pratt & Whitney Canada | 5 | |
| PWC50699 | lifting adapter - Pratt & Whitney Canada | 2 | |
| PWC50940 | ADAPTER-LIFTING | 4 | |
| PWC51098 | ADAPTER-FLOW TEST | 1 | |
| PWC51842 | ANTI-ROTATION ADAPTER | 1 | |
| PWC52130 | ADAPTER, LIFTING SLING (CITATIONINSTALLED JT15D-4, -4B ONLY; POST- SB7158 | 1 | |
| PWC52693 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
| PWC52701 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
| PWC54082 | holding adapter - Pratt & Whitney Canada | 5 | |
| PWC54212 | ADAPTER TURBO ASSY - Pratt & Whitney Canada | 6 | |
| PWC54213 | lifting adapter - Pratt & Whitney Canada | 6 | |
| PWC54214 | lifting adapter - Pratt & Whitney Canada | 6 | |
| PWC54234 | balancing adapter - Pratt & Whitney Canada | 2 | |
| PWC54576 | ADAPTER-LOCKING | 3 | |
| PWC54609 | Adapter-Balance Hydra. | 1 | |
| PWC54933 | HOLDING ADAPTER - PR | 1 | |
| PWC54967 | ADAPTER BAL-PT ROTOR ABOR | 2 | |
| PWC55001 | Lifting adapter - Pratt & Whitney Canada | 1 | |
| PWC55444 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC55554 | ADAPTER FUEL-INHIB | 6 | |
| PWC55878 | Adapter-ANTIROTATION | 1 | |
| PWC55921 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC56144 | lifting adapter - Pratt & Whitney Canada | 2 | |
| PWC56159 | rod adapter - Pratt & Whitney Canada | 1 | |
| PWC56274 | ADAPTER RGB HOUSING-PLANT 5 | 1 | |
| PWC56434 | lifting adapter - Pratt & Whitney Canada | 4 | |
| PWC56591 | lifting adapter - Pratt & Whitney Canada | 1 | |
| PWC56612 | ADAPTER-CROWFOOT | 4 | |
| PWC56871 | lifting adapter - Pratt & Whitney Canada | 5 | |
| PWC56894 | FLUSH ADAPTER-PLANT | 1 | |
| PWC56940 | lifting adapter - Pratt & Whitney Canada | 3 | |
| PWC57084 | Adapter - Pratt & Whitney Canada | 5 | |
| PWC57158 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC57254 | Adapter-PT SHAFT | 1 | |
| PWC57411 | ADAPTER MOTIVE FLOW - Pratt & Whitney Canada | 5 | |
| PWC57496 | Gauge adapter - Pratt & Whitney Canada | 2 | |
| PWC57646 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC58758 | ADAPTER, APU TRANS-PORT | 4 | |
| PWC59053 | Wash adapter - Pratt & Whitney Canada | 8 | |
| PWC60144 | Adapter - Pratt & Whitney Canada | 6 | |
| PWC60445 | ADAPTER- BLADE | 1 | |
| PWC60455 | ADAPTER-ANTIROTATION | 1 | |
| PWC60686 | ADAPTER-LIFTING | 1 | |
| PWC60787 | Adapter - Pratt & Whitney Canada | 3 | |
| PWC60850 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC61004 | ADAPTER-LIFTING | 1 | |
| PWC61059 | Adapter - Pratt & Whitney Canada | 3 | |
| PWC61248 | ADAPTER-TIE SHAFT | 1 | |
| PWC61322 | ADAPTER-LIFTINGIMP/SET | 1 | |
| PWC61345 | DRIFT ADAPTER-AC GEN | 3 | |
| PWC61577 | ADAPTER-LPT | 1 | |
| PWC61688 | ADAPTER -1ST STAGE ROTOR | 1 | |
| PWC61712 | ADAPTER-FAN ASSY | 1 | |
| PWC61766 | ADAPTER-HEATER | 1 | |
| PWC61943 | ADAPTER-LIFTING FIXT. | 1 | |
| PWC62296 | RING-ADAPTER | 1 | |
| PWC62316 | ADAPTER-COOLING | 1 | |
| PWC62317 | ADAPTER PLATE-OVEN | 1 | |
| PWC62542 | Rear adapter - Pratt & Whitney Canada | 4 | |
| PWC62643 | ADAPTER-1ST STAGE | 1 | |
| PWC62756 | ADAPTER-STAND | 1 | |
| PWC62759 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC62767 | ADAPTER - LIFTING | 1 | |
| PWC62787 | ADAPTER-INTERMEDIATE | 1 | |
| PWC63096 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC63297 | ADAPTER-PRESS | 1 | |
| PWC63386 | ADAPTER - PUSHER | 1 | |
| PWC64042 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC64051 | Adapter - Pratt & Whitney Canada | 5 | |
| PWC64059 | ADAPTER - HOUSING | 1 | |
| PWC64618 | Adapter - Pratt & Whitney Canada | 3 | |
| PWC64656 | ADAPTER (SERIAL CONNECTION), PRE-SB41068 | 3 | |
| PWC64792 | ADAPTER - TEST | 1 | |
| PWC64852 | ADAPTER - TEST | 2 | |
| PWC65819 | EEC ADAPTER CABLE EMC-60 | 1 | |
| PWC66368 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC66471 | Adapter - Pratt & Whitney Canada | 1 | |
| PWC66625 | Adapter - Pratt & Whitney Canada | 4 | |
| PWC67348 | ADAPTER - HEATER | 1 | |
| PWC68865 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC68977 | ROD-ADAPTER | 1 | |
| PWC69269 | ADAPTER-HEAT GUN | 3 | |
| PWC69810 | cable adapter - Pratt & Whitney Canada | 3 | |
| PWC69836 | Wash adapter - Pratt & Whitney Canada | 7 | |
| PWC69875 | Wash adapter - Pratt & Whitney Canada | 1 | |
| PWC70090 | Lifting adapter - Pratt & Whitney Canada | 1 | |
| PWC70124 | lifting adapter - Pratt & Whitney Canada | 4 | |
| PWC70319 | lifting adapter - Pratt & Whitney Canada | 3 | |
| PWC70336 | ADAPTER-GEARSHAFT | 1 | |
| PWC70386 | lifting adapter - Pratt & Whitney Canada | 1 | |
| PWC70675 | Lifting adapter - Pratt & Whitney Canada | 2 | |
| PWC70792 | mounting adapter - Pratt & Whitney Canada | 6 | |
| PWC70797 | ADAPTER P3 LEAK CHK - Pratt & Whitney Canada | 5 | |
| PWC71171 | Adapter - Pratt & Whitney Canada | 2 | |
| PWC71392 | ADAPTER-HYDRAULIC | 5 | |
| PWC71489 | ADAPTER, ANTI-ROTATION | 3 | |
| PWC71548 | ADAPTER - BALANCING ROTOR | 1 | |
| PWC71780 | ADAPTER-HEATING PLATFORM | 1 | |
| PWC71781 | ADAPTER-HEATING PLATFORM | 1 | |
| PWC71782 | ADAPTER-HEATING PLATFORM | 1 | |
| PWC71783 | ADAPTER-HEATING PLATFORM | 1 | |
| PWC72520 | ADAPTER-FLOW CHECK FIXTURE | 4 | |
| PWC72569 | DCU II Fine Thread T-Harness Adapter | 1 | |
| PWC72790 | DCU-T-HARNESS ADAPTER | 1 | |
| PWC73009 | RS422-USB Dual Channel Adapter | 4 | |
| PWC76077 | ADAPTER- LEAK TEST | 1 | |
| PWC85894 | ADAPTER - NUT, SQUIRREL CAGE | 1 | |
| PWC85952 | ADAPTER ROD - LPC BOOST | 1 | |
| PWC85973 | ADAPTER RING - BUILD STAND | 1 | |
| PWC86145 | ADAPTER - CORE CART | 1 | |
| PWC86316 | ADAPTER ANTI-ROTATION | 1 | |
| PWC86620 | ADAPTER- BUILDPOST TO FANCASE | 1 | |
| PWC86673 | ADAPTER-UNIVERSAL CART EXHAUST CASE LIFT | 1 | |
| PWC86874 | CART ADAPTER - OBPD | 1 | |
| PWC86948 | LIFTING ADAPTER - STORAGE CRADLE | 1 | |
| PWC89878 | Pressure Set Adapter - Pratt & Whitney Canada | 2 | |
| PWC90086 | RIG, FUEL MANIFOLD ADAPTERS - FLOW TEST | 6 | |
| PWC90191 | USB To RS-232 Adapter (1 PORT) | 1 | |
| Q46100 | ADAPTER 8-EA CLT&PHL | 10 | |
| Q47334 | ADAPTER-AXLE-NUT | 10 | |
| QR-330 | INHIBITING ADAPTER INHIBITING RIG ADAPTER - CF6-80E1 ENGINE | 1 | |
| R-1117 | ADAPTER-JACK F FUSEL | 13 | |
| R-117 | ADAPTER - BRAKE DISC | 1 | |
| R-1496 | TRONAIR® R-1496 ADAPTER FILL COUPLING | 2 | |
| R-1798 | ADAPTER- MLG JACK PAD | 7 | |
| R-1988 | ADAPTER-JACK, WING | 13 | |
| R1117 | ADAPTER-JACK | 13 | |
| R1722 | ADAPTER - BRAKE Q400 | 1 | |
| R191703 | RADIALL R191703 UG564/U N MALE ADAPTER CONNECTOR - TYPE C FEMALE (86B) | 1 | |
| R1988 | ADAPTER - JACK, WING | 13 | |
| R46014 | NLG ADAPTER-TORQUE | 28 | |
| RB T101623-7 | Adapter, Cradle Set-Support, Main Rotor Blade | 1 | |
| RB23005426 | Guide - Spur Adapter Gearshaft C-30 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23033037 | Holder-Compressor Rotor Coupling Adapter | 1 | |
| RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
| RB6799199 | Anti-Icing Air Adapter Valve | 1 | |
| RB6893501 | Drift-Spur Adapter Gearshaft | 2 | |
| RBD29826 | 4 Blade Tail Rotor Nut #369D21716-5 Torque Wrench Adapter | 3 | |
| RBT400212 | Adapter Assembly (407-210-005-101) | 2 | |
| RBT400255 | Adapter Assembly (430-240-010-101) | 1 | |
| RBT400256 | Power Adapter (430-240-005-101) | 1 | |
| RBT400283 | Adapter (430-240-020-101) | 1 | |
| RBW2905G00132-3G | PCM ADAPTERS KIT, HYDRAULIC SYSTEM TEST BENCH (GF-40-00) | 2 | |
| RBW6205G09031-3G | Main Rotor Head Support - Trolley Adapter | 2 | |
| RBW6205G09132-3G | TROLLEY ADAPTER, SWASHPLATE SUPPORT (HE-20-00) | 3 | |
| RC2500G05 | " CFM56-5B/CMANUALDRIVE PADADAPTER 1 " | 1 | |
| RC2500G06 | "CFM56-7B MANUAL DRIVE PAD ADAPTER 1 " | 1 | |
| RC2700 | ADAPTER HYDRAULIC PUMP PAD-RIGHT SIDE | 1 | |
| RC2702G01 | ADAPTER - MANUAL DRIVE PAD | 1 | |
| RC2990G01 | ADAPTER, MANUAL DRIVE PAD, GENX-1B & GENX-2B ENGINE, FUTUREDRIVE NG | 1 | |
| RDA100i | Rundown Adapter (10-100 IN/LB) | 1 | |
| RE220-SHP-001 | COVER - APU GENERATOR ADAPTER | 1 | |
| RF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| RFA-8332 | COAXIAL ADAPTER - REVERSED POLARITY BNC MALE (PLUG | 1 | |
| RFT-1230 | ADAPTER - COAX (TNC TO BNC) | 4 | |
| RFT1230 | ADAPTER - COAX (TNC TO BNC) | 4 | |
| RIN28108706000 | ADAPTER -STARTER FILL | 1 | |
| RNC7913-10 | ADAPTER - REMOVAL | 1 | |
| RRT032369 | ADAPTER - SPRUNG WIND DEFLECTION | 4 | |
| RRT033866 | ADAPTER - TRENT 1000 FUEL SYSTEM INHIBITION | 4 | |
| RRT050389 | TURNOVER ADAPTER - LOAD HP/IP SUPPORT STRUCTURE. | 1 | |
| RRT054025 | ADAPTER PRE SB 72-H706 | 1 | |
| RRT072428 | OIL FILL ADAPTER-RRT072428 | 3 | |
| RRT083711 | ADAPTER POST SB 72-H706 | 1 | |
| RRT087442 | ADAPTER KIT - P30 MANIFOLD DRYING | 1 | |
| RRT087442-2 | ADAPTER KIT - P30 MANIFOLD DRYING(VACUUM GAGE) | 2 | |
| RRT087442-3 | ADAPTER KIT - P30 MANIFOLD DRYING | 2 | |
| RRT089154 | LIFT ADAPTER - BASIC STAND | 1 | |
| RRT118500 | ADAPTER-IDG | 1 | |
| RS232C | CVR AUDIO MONITOR ADAPTER - UNIVERSAL AVIONICS SYSTEM CORP. | 1 | |
| RS422 | CABLE, ADAPTER - RS422. | 1 | |
| RSE 6403 | INLET LIFTING ADAPTER, CF34-10E ENGINE | 8 | |
| RSE1051 | ADAPTER-FUEL CONTROL | 2 | |
| RSE1134 | ADAPTER - TORQUE TOOL | 1 | |
| RSE1234 | ADAPTER-TORQUE TOOL | 17 | |
| RSEI05I | ADAPTER- FUEL CONTROL | 1 | |
| RVA30 | ADAPTER USED WITH RV3355-8 | 1 | |
| RY31020A | ADAPTER - INLET, POWER PL | 1 | |
| S/20002210 | 1-1/4X3/4 ADAPTER/40IN ARM | 1 | |
| S232B /5653 | SOCKET ASSY-NLG ADAPTER | 1 | |
| S277CR4000 | ADAPTER - CRADLE | 1 | |
| S3122 | S3122;ALWL ADAPTER SC PC MALE TO LC PC FEMALE--REV000 | 1 | |
| S34093-4 | NAV-AIDS PITOT STATIC ADAPTERS | 2 | |
| S34146-4 | ADAPTER - STATIC LINE | 10 | |
| S34146B | ADAPTER: PITOT STATIC,TEST, BLANKING,SHORTS SD3-30/SD3-60 | 5 | |
| S51089-4 | Barfield S51089-4 Pitot Static Test Adapter, For Fixed Wing Aircraft | 3 | |
| S76-612 | PITOT-STATIC ADAPTER KIT, PNEUMATIC BOOST PUMP | 3 | |
| SA-2000 | DUAL AIRLINE BACK-MOUNTED ADAPTER KIT | 4 | |
| SA-EMU | Scanner Adapter for Rohman mini-rotor to unirotor | 1 | |
| SA070810 | AC ADAPTER CORD FOR CUI P/N DMS090110X-P5-ET I.T.E POWER SUPPLY, 5 FEET, WITH LED INDICATOR, REPLACEMENT | 1 | |
| SA1234 | ADAPTER 1/2 - 3/4 | 1 | |
| SA3812 | ADAPTER 3/8 - 1/2 | 1 | |
| SAF1F | ADAPTER 1/2 / ADAPTER 1/2-3/8 | 1 | |
| SAS-FXU-9 | FLEXIBLE SCANNER ADAPTER FOR 4-PIN PROBES,9"ENGTH,SLIMLINE | 1 | |
| SBE1882 | ADAPTER - PRESS PORT | 1 | |
| SBE2220 | ADAPTER ASSY - OPV, FUNCTIONAL TEST | 1 | |
| SCA-C24002-78 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) & IDG | 1 | |
| SCA-FUEL2M | 2M - AIRBUS CENTRE TANK 1.5M HOSE ADAPTER | 1 | |
| SCST1AK350CU | KIT-ADAPTER CU,SCS350 | 1 | |
| SCST1AK350GSP | KIT-ADAPTER GSP,SCS350 | 1 | |
| SDM11 | ADAPTER - FLEXIBLE SHAFT DRIVE | 6 | |
| SDM11A | ADAPTER - FLEXIBLE SHAFT DRIVE | 1 | |
| SE-28-1103 | ADAPTER ASSEMBLY - SUMP DRAIN VALVE REMOVAL | 2 | |
| SE-402-AC3 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 2 | |
| SE227-2011 | Torque Adapter - Rudder Trim Knob | 1 | |
| SE27-2011 | TORQUE ADAPTER - RUDDER TRIM KNOB | 7 | |
| SE27-6002 | ADAPTER -0 SPOILER ACTUATOR CYLINDER TO REMOVE | 1 | |
| SE28-1103 | Adapter Assembly - Sump Drain Valve Removal | 2 | |
| SE28-1105 | HOSE ADAPTER - SUMP FUEL DRAIN | 2 | |
| SG13-ADP-HYC-12 | QUICK DISCONNECT ADAPTER -12 HOSE | 1 | |
| SJN471 | TORQUE ADAPTER 1-1/16’’ | 2 | |
| SK-4500-TC | VSWR METER-COMES WITH CASE, INJECTION CABLE AND CALIBRATION ADAPTER (OPEN, SHORT AND LOAD) | 3 | |
| SK2-20413 | FILLER-ADAPTER | 4 | |
| SKA100-4 | Barfield SKA100-4 Pitot Static Adapter | 4 | |
| SKASR20-4 | Barfield SKASR20-4 Pitot Static Adapter, For Cirrus Aircraft | 3 | |
| SLT0075 | ADAPTER - TORQUE WRENCH | 1 | |
| SMA028 | Bowers SMA028 SmartPlug M6-M10 Adapter (to use M10 Holders with M6 Plugs) | 1 | |
| SMIG277CR7R4H | ADAPTER - CRADLE | 1 | |
| SPG100ATPG-400-C1AB | AIRCRAFT TYRE PRESSURE GAUGE - COMES WITH BIG AND SMALL ADAPTERS | 1 | |
| SPK-FMG-011A | FLAT ADAPTER #10-32F (100 LBF) | 2 | |
| SPL-10029 | ADAPTER - BORESCOPE MOTOR | 1 | |
| SPL-10357 | TORQUE WRENCH ADAPTER STOP NUT - WLG | 1 | |
| SPL-10873 | ADAPTER EQPT - HEAT EXHANGER / PLENUM, R&I, AC PACK | 1 | |
| SPL-10895 | ADAPTER - TRAINING EDGE FLAP ACTATOR R/I | 1 | |
| SPL-10997 | ADAPTER ASSY - WRENCH, HOOK SPANNER | 1 | |
| SPL-14529 | ADAPTER - LRU | 1 | |
| SPL-14572 | ADAPTER - MAIN FUEL PUMP | 1 | |
| SPL-14774 | ADAPTER - VSV PNEUMATIC | 1 | |
| SPL-14867 | ADAPTER - OFFSET CRANK PAD | 1 | |
| SPL-14868 | ADAPTER - CORE TURNING | 1 | |
| SPL-14920 | ADAPTER - CORE ENGINE LOCK | 1 | |
| SPL-15596 | ADAPTER - VSV HYDRAULIC | 1 | |
| SPL-1603 | ADAPTER - HEAT EXCHANGER | 1 | |
| SPL-1628 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| SPL-1646 | ADAPTER - HOT WIRE ANEMOMETER | 1 | |
| SPL-1681 | ADAPTER - RUDDER PEDAL FORCE CHECK | 1 | |
| SPL-1748 | ADAPTER - TORQUE WRENCH, MANUAL, STABILIZER TRIM WHEEL | 1 | |
| SPL-1751 | EQUIPMENT -ADAPTER, CONTROL WHEEL- | 1 | |
| SPL-1783 | ADAPTER - LEAK TEST, APU FUEL LINE SHROUD | 1 | |
| SPL-1808 | CABLE - ADAPTER (USE WITH TELEDYNE DFDAU FLIGHT LINE TESTER P/N 2229738) | 1 | |
| SPL-19 | ADAPTER - CADC REMOTE TEST | 1 | |
| SPL-1975 | ADAPTER - INSTALLATION/REMOVAL FUSELAGE DRAIN VALVE | 1 | |
| SPL-20727 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 1 | |
| SPL-2358 | SET ADAPTER - TORQUE HMU | 1 | |
| SPL-27 | Adapter - Torque, Hydralic Reservoir Barrel Guide | 1 | |
| SPL-3739 | Adapter -Torque | 1 | |
| SPL-3740 | Adapter-Torque | 1 | |
| SPL-4093 | Adapter - MLG Trim Cylinder | 1 | |
| SPL-5064 | ADAPTER - PROTRACTOR | 1 | |
| SPL-5378 | Adapter-Torque Wrench | 1 | |
| SPL-5438 | Adapter-Torque Wrench | 1 | |
| SPL-5441 | Adapter-Torque Wrench | 1 | |
| SPL-6465 | ADAPTER - THRUST REVERSER HOLD-OPEN ROD | 1 | |
| SPL-8854 | ADAPTER - PULLER, OIL INLET COVER | 1 | |
| SPL-9790 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | 1 | |
| SPL2358 | SET ADAPTER - TORQUE HMU | 1 | |
| SPR-001-BOE | AIR SOURCE FITTING - REFUEL ADAPTER | 1 | |
| SRDH341 | ADAPTER, TORQUE, 1/2" DRIVE, 3" LENGTH, 1-1/16" | 1 | |
| SRES30 | ADAPTER - TORQUE | 3 | |
| SRES30А | ADAPTER - TORQUE, RR TRENT ENGINE THRUST REVERSER | 3 | |
| SS-4-SAE-7-4 | ADAPTER - HOSE | 1 | |
| SS32092-4 | STATIC-ADAPTER(BAR TYPE) | 5 | |
| ST-71-8 | ADAPTER-GAGE | 2 | |
| ST1350C/LB-2 | Adapts FTI Mandrels (-1) and LB Nosecaps to -5 MB mandrel adapter/LB nosecap to MB-Z/XX puller | 1 | |
| ST2575A | Standard Tool - Torque Adapter | 4 | |
| ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | 1 | |
| ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | 1 | |
| ST2580-243 | TORQUE WRENCH ADAPTER - BOX TYPE, 3.37 NOMINAL ACROSS FLATS | 4 | |
| ST2580-245 | TORQUE WRENCH ADAPTER - CROWFOOT | 4 | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 9 | |
| ST2580-263 | TORQUE WRENCH ADAPTER - WALKING BEAM ASSEMBLY - NUT SPACER | 8 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 13 | |
| ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-24-3-7 | SPANNER WRENCH ADAPTER-BACN10RF24 NUT | 2 | |
| ST2580-267-24-4-7 | STANDARD TOOL-SPANNER WRENCH ADAPTER FOR BACN10RF-NUTS | 1 | |
| ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-XX-X-X | SPANNER WRENCH ADAPTER FOR BACN10RF NUTS. (ST2580-267 DRAWING) | 1 | |
| ST2580-337 | TORQUE WRENCH ADAPTER - FOR 15/16-INCH HEX NUT | 2 | |
| ST2580-550A | TORQUE ADAPTER, RATCHETING 737-8 | 1 | |
| ST60419 | Adapter, Pick-Up Tub | 1 | |
| ST95063 | TORQUE ADAPTER-FUEL CONTROL, DELTA P | 2 | |
| ST992B | ADAPTER-GREASE GUN | 9 | |
| ST992B, | ADAPTER - GREASE GUN - FLAP EXHAUST GATE | 9 | |
| ST992B-1 | ADAPTER-GREASE GUN | 1 | |
| STD-11561 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1/2 NPT MALE X 1/2" | 1 | |
| STD-3900 | ADAPTER - STRAIGHT, TUBE TO HOSE (MEETS AS5180D04 SPECOFOCATION) | 1 | |
| STD-6100 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1" NPT X 1" | 1 | |
| STD-7111 | ADAPTER - HEX WRENCH, 0.25-INCH HEX TO 0.375IN SQU | 1 | |
| STD67669 | Torque Adapter-Main Drive Shaft | 1 | |
| STD67681 | Adapter-Torque | 1 | |
| STD67685 | Adapter-Drive Pad | 1 | |
| STD67686 | Adapter-Discharge | 1 | |
| SV225 | COM-20583 ADAPTER - STRAY VOLTAGE | 1 | |
| SWE-67 | SWE-67 - RATCHET ADAPTER. | 1 | |
| SWE13832-11 | ENGINE STAND - ENGINE ADAPTER | 1 | |
| SWE13852-750 | ADAPTER,HUB-BLADE | 1 | |
| SWE45233 | ADAPTER-SWEENEY | 1 | |
| SWE4803 | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | 1 | |
| SWE4803A | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | 1 | |
| SWN-25NPT-25FNPT-PE | Bojo Tools SWN-25NPT-25FNPT-PE - 2 Long Swivel Sealant Nozzle Adapter Male to Female 14 NPT | 1 | |
| T | ADAPTER - IDG SERVICING | 1 | |
| T&E 12-10-1 | ADAPTER - IDG SERVICING | 1 | |
| T-12815 | ADAPTER - FUEL PUMP INLET PORT | 1 | |
| T-181246 | Adapter-Power Arm | 1 | |
| T-181246A | Adapter-Power Arm | 1 | |
| T-181346 | Adapter-Power Arm | 1 | |
| T-300483 | Adapter - Power Arm | 1 | |
| T-304040 | Adapter-Power Arm | 2 | |
| T-349 | Adapters - SR-20, SR-22 | 3 | |
| T-4040-12 | STEPPLATEADAPTER2-1/4X2-3/4PRT | 1 | |
| T-4040-13 | STEPPLATEADAPTER2-1/8X2-5/8PRT | 1 | |
| T-4040-14 | STEPPLATEADAPTER2-3/8X2-7/8PRT | 1 | |
| T-4040-2 | STEPPLATEADAPTER1-7/8X2-3/8PRT | 1 | |
| T-4040-4 | STEPPLATEADAPTER1-5/8X2-2PROTO | 1 | |
| T-420 | ADAPTER - TYRE INFLATION TOOL | 2 | |
| T-438834 | Adapter-Torque | 1 | |
| T-445708 | Adapter-Torque | 2 | |
| T-451 | Adapters - PC12 | 3 | |
| T-451318 | Adapter-Torque | 1 | |
| T-451318PM | ADAPTER-TORQUE | 1 | |
| T-453305 | Adapter - Torque | 1 | |
| T-475070-1-16 | ADAPTER, DISCHARGE-OUTLET-SEAL-TEST | 1 | |
| T-702ROA 686 BSA | ADAPTER - HALKEY ROBERTS CORP | 1 | |
| T-71023 | Torque Adapter - Barrel gland nut | 1 | |
| T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
| T-71038 | Torque Adapter - Barrel gland nut | 1 | |
| T-820 | Adapters - Malibu, Mirage (PA-46) | 4 | |
| T-97483069 | APEX SJ409-2 ADAPTER EXT | 1 | |
| T-F187 | ADAPTER D-100-MIL-1 | 1 | |
| T-J4240-12M | PULLER ADAPTER MALE 5/8-3 | 1 | |
| T-J4240-14M | PULLER ADAPTER MALE 5/8-7 | 1 | |
| T-RD289 | ADAPTER INSTALL -HEMTT | 1 | |
| T-S68016 | S68016 - 5/8 ADAPTER-TF528DE2 | 1 | |
| T101263-105 | ADAPTER (PART OF T101263-101) | 1 | |
| T103063 | TOOL SET-ADAPTER HOLDING,ENGINE | 1 | |
| T1203-00 | ADAPTER-INTERFACE | 1 | |
| T1203-01 | ADAPTER-INTERFACE | 1 | |
| T1203-03 | ADAPTER-INTERFACE | 1 | |
| T12816 | Fixture-test, port adapter | 1 | |
| T131946 | Q-Spring torque adapter | 1 | |
| T158093-001 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 1 | |
| T181246 | ADAPTER-POWER ARM | 1 | |
| T1F69J | FORK, ADAPTER - MJ-1 | 1 | |
| T260 | ADAPTER: TOWBAR,UNIV, DA-20,2EA REQD | 2 | |
| T3078766 | PROGRAMMING ADAPTER NZ-2000/2010 | 1 | |
| T325726-57 | SELF-TEST ADAPTER | 1 | |
| T33264 | Anti-Skid Adapter Removal | 10 | |
| T420 | ADAPTER - TYRE INFLATION TOOL | 2 | |
| T48334 | ADAPTER-NLG WHL AXLE NUT | 1 | |
| T5776 | ADAPTER-INSTALLATION | 1 | |
| T7055 | ADAPTER-TORQUE | 1 | |
| T804E3 | ADAPTER - FUEL PUMP INLET PORT | 1 | |
| T92165 | A300- JACK ADAPTERS | 1 | |
| TA1J3200E | ADAPTER,LIFTING-POD | 1 | |
| TA3 | ADAPTER 3/8 / ADAPTER 1/4-3/8 | 6 | |
| TB-TYPE-N/BULLET/F-F | TB-TYPE-N/BULLET/F-F;Adapter Type-N F to Type-N F DC to 18 GHz 50 Ohm | 1 | |
| TB-TYPE-N/M-SMA/F | TB-TYPE-N/M-SMA/F;Adapter Type-N M to SMA F DC to 18 GHz 50 Ohm | 1 | |
| TE60B00019 | HARNESS - CALIBRATION ADAPTER, OIL QUANTITY | 1 | |
| TE60B40037-1 | TEST ADAPTER - AMPHENOL FUEL QUANTITY PROBE | 2 | |
| TE60B40147 | TEST ADAPTER - TRW/CINCH FUEL QUANTITY PROBE | 1 | |
| TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| TE65-20804 | Torque Wrench Adapter - Stabillizer Trim Hand Wheel | 1 | |
| TE65B00731 | ADAPTER - THRUST REVERSER ACTUATOR, SHOP AIR | 1 | |
| TE65B00776 | HARNESS ASSEMBLY - FUEL QUANTITY INDICATOR, CALIBRATION ADAPTER, NUMBER 2 AND NUMBER 3 MAIN AND CENTER WING TANK | 1 | |
| TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE65B00776-1 -51 -101 | Harness -Calibration Adapter. Fuel Quantity Indicator 2. 3. Main & Center Wing Tank | 1 | |
| TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 2 | |
| TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | 1 | |
| TE65B90110 | TUBE ADAPTER - ENGINE START VALVE | 1 | |
| TE65B90115 | ADAPTER CABLE - ENGINE OIL QUANTITY, AIRPLANE WIRING | 1 | |
| TE65B91156 | ADAPTER CABLE -0 ENGINE OIL | 1 | |
| TEE74 | ACTIVE AIDS ADAPTER JT9D-7R4 | 1 | |
| TF | CYCLING ADAPTER DASH-8 NLG | 1 | |
| TF-56989 | CYCLING ADAPTER DASH-8 NLG | 3 | |
| TF-56989-IAS | CYCLING ADAPTER DASH-8 NLG | 1 | |
| TF50B27002A1 | ADAPTER - GREASING | 2 | |
| TF50B39001 | ADAPTER 50-PIN BREAK-OUT BOX | 1 | |
| TF50B71307 | ADAPTER-CHECKING CAL | 2 | |
| TF56989 | CYCLING ADAPTER DASH-8 ,NLG | 3 | |
| TL301256 | CABLE ASSEMBLY, SERIAL ADAPTER-EMT | 2 | |
| TL5596 | ADAPTER - VERTICAL HOIST PROP | 2 | |
| TL99517-C | SOCKET, FUEL ADAPTER NOZZLE, SLOTTED- | 1 | |
| TM7900G001 | WASHING TOOL ADAPTER - METALIC | 1 | |
| TMH MA02 | Jack Adapter MLG - 13.2 Ton | 2 | |
| TMH MA03 | Jack Adapter MLG - 27 Ton | 1 | |
| TMH NA01 | Jack Adapter NLG - 2.2 Ton | 2 | |
| TMH NA01-00-00 | JACK ADAPTER NLG - 2.2 TON | 9 | |
| TMH NA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
| TMH NA10 | Jack Adapter NLG - 5.5 Ton | 1 | |
| TMH RA11-01-12 | ADAPTER M.M12X1-M.JIC7/16 | 3 | |
| TMHD143-32-00 | ADAPTER-FILLING, ALT BRAKING RESERVOIR | 1 | |
| TMHDI16-11-00 | PRESS GAUGE ADAPTER - FEM M10X1 / FEM. NATO (ref SE12-00) | 3 | |
| TMHDI43-12-00 | ADAPTER-120 DEGREE SWIVEL | 2 | |
| TMHDI43-32-00 | ADAPTER-FILLING,ALT BRAKING RESERVOIR | 7 | |
| TMHDI65-00-00 | ADAPTER F NATO - M JIC - 716-20 | 1 | |
| TMHDIC16-21-00 | PRESURE GAUGE ADAPTER - 14 GAZ FNATO | 1 | |
| TMHEC22-00-00 | ADAPTER - CRADLE | 1 | |
| TMHMA02-00-00 | ADAPTER-MLG JACK | 8 | |
| TMHMA020000 | ADAPTER-MLG JACK | 8 | |
| TMHNA01-00-00 | ADAPTER-NLG JACK | 9 | |
| TMHNA01-00-00-5J | ADAPTER-NLG JACK | 1 | |
| TMHNA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
| TMHNA010000 | ADAPTER-NLG JACK | 9 | |
| TMHRA11-12-67 | ADAPTER M NATO M 716-20 UNF ASSY | 3 | |
| TMHTB03-10-00 | ADAPTER - ATR TOWBAR | 4 | |
| TMRX8 | TORQUE ADAPTER ESTRIADO 1/4 X 1/4 - ABERTO | 2 | |
| TO3836 | ADAPTER -TORQUE WRENCH | 1 | |
| TRI-ACCY-RF-PUSH-ON | TRI-ACCY-RF-PUSH-ON;F Style Push On Adapters | 1 | |
| TRI-ACCY-USBPWR-AUS-PLUG | TRI-ACCY-USBPWR-AUS-PLUG;Australian Power Adapter for USB Charger | 1 | |
| TRI-ACCY-USBPWR-VEH | TRI-ACCY-USBPWR-VEH;Vehicle Power Adapter without USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-VEH-WCBL | TRI-ACCY-USBPWR-VEH-WCBL;Vehicle Power Adapter with USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-WCBL | TRI-ACCY-USBPWR-WCBL;AC/DC Power Adapter - Battery Charger w/ USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-WOCBL | TRI-ACCY-USBPWR-WOCBL;AC/DC USB Power Adapter - Battery Charger w/o USB Power/Data Cable | 1 | |
| TRI-DSP-NEW-PWR-ADPT | TRI-DSP-NEW-PWR-ADPT;AC/DC Power Adapter - Battery Charger w/ US Power Cable for New DSP Family | 1 | |
| TRI-DSP-PWR-ADPT-NEW | TRI-DSP-PWR-ADPT-NEW;AC/DC Power Adapter - Battery Charger w/o Power Cable for New DSP Family | 1 | |
| TRI-LKG-BNC-TO-F-ADAPTER | TRI-LKG-BNC-TO-F-ADAPTER;Adapter BNC Jack to F connector plug | 1 | |
| TRI-LKG-MMC-1 | TRI-LKG-MMC-1;MMC-1 Mini Mobile Charger for Seeker X - 12VDC vehicle adapter fast charger | 1 | |
| TRI-LKG-PWR-ADPT-TX | TRI-LKG-PWR-ADPT-TX;AC/DC Power Adapter - Battery Charger for Seeker HL Source Transmitter | 1 | |
| TS1176/D917 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
| TSJ60B00002-2 | TEST JIG - AUTO-THROTTLE ADAPTER, ATTITUDE SIMULATION TABLE | 1 | |
| TTR917271 | ADAPTER-NITROGEN,TYPE | 1 | |
| TV74703G | ADAPTER,ORAL TUBE TEST (HALKEY ROBERTS CORP->V98021) | 1 | |
| TWA 24-25-03-0108 | ADAPTER-TEST BOX | 1 | |
| U14A320000A | MANOMETER MIT ADAPTER (0-3500 PSI) | 1 | |
| U21891000 | ADAPTER - INFLATION | 16 | |
| UPORT 1110 | 1-PORT USB-TO-SERIAL ADAPTER, RS-232 | 2 | |
| USA-19HS | CABLE - HIGH SPEED USB TO SERIAL ADAPTER | 1 | |
| USB-SERIAL DB9 | USB-SERIAL MALE 9 PINS ADAPTER | 1 | |
| UT1127 | ADAPTER HOSE EPR TRANSMITTER TESTER, BB211-535 ENGINES | 1 | |
| UT1145 | ADAPTER AND COUPLING - OIL FILLER, AEROQUIP COUPLING | 1 | |
| UT1277 | ADAPTER - HOSE, EPR TANSMITTER TESTER - RB211-535 ENGINES (GDC10146) | 1 | |
| UT713 | ADAPTER, SELF-SEALING | 1 | |
| UT865 | ADAPTER - LP FUEL SUPPLY TUBE | 7 | |
| UT954 | ADAPTER-OIL TANK | 8 | |
| UT984 | ADAPTER - LP FUEL SUPPLY TUBE | 7 | |
| UT985 | ADAPTER - LP FUEL SUPPLY TUBE | 1 | |
| VGZ-68 | ADAPTER - WRENCH, | 1 | |
| VP-60 | VP-60;Optical Power Meter - with 2.5mm Adapter - Software | 1 | |
| VP-60A | VP-60A;Optical Power Meter W/ 2.5 And 1.25MM Adapters Software | 1 | |
| VPP-UPP16 | VPP-UPP16;SmartClass Fiber OPM UPP Adapter 1.6mm | 1 | |
| VPP-UPP20 | VPP-UPP20;SmartClass Fiber OPM UPP Adapter 2.0mm | 1 | |
| VSE-1100-REPL-12VDC-SUP | VSE-1100-REPL-12VDC-SUP;VSE-1100 Replacement 12VDC Auto Adapter | 1 | |
| WCI-1600HO | ADAPTER-OFFSET | 2 | |
| WCI-1700-ONE-0601-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
| WCI-1700-ONE-0623-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
| WCS32965 | WRENCH-TORQUE ADAPTER | 1 | |
| WIDS107G | ADAPTER - EXPANDING STALL VENT | 1 | |
| WP-N-GN | OREI Universal 2 in 1 Plug Adapter Type N for Brazil High Quality CE Certified-RoHS Compliant WP-N-GN | 1 | |
| WR-2006907X101-1-1 | WRENCH ADAPTER - NOSE WHEEL STEERING | 1 | |
| WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
| WSS4AK350 | WSS4-ADAPTER KIT HYD | 1 | |
| WTCAK3211 | TOOL KIT-ADAPTER, 321XLR | 1 | |
| X200948408 | IDG FLUSHING ADAPTER KITS - B1-B INPUT/OUTPUT FLUSH ADAPTERS | 1 | |
| YA3000B114 | 1-1/4" CROWFOOT ADAPTER | 1 | |
| YA3000B1316 | 1-3/16" CROWFOOT ADAPTER | 1 | |
| YA3000B1516 | 1-5/16 CROWFOOT ADAPTER | 1 | |
| YA3000B1716 | 1-7/16" CROWFOOT ADAPTER | 1 | |
| YA6510-2 | ACURA INTEGRA 1990-93 ADAPTER | 1 | |
| Z-1063-11 | TIRE BEAD BREAKER RING - NOSE WHEEL ADAPTER | 3 | |
| Z-1063-13 | TIRE ADAPTER RING-MAIN | 6 | |
| Z-1063-14 | TIRE BEAD BREAKER RING - MAIN WHEEL ADAPTER | 3 | |
| Z-3072-20 | MAIN TIRE ADAPTER RING (30X9.00-15) | 3 | |
| Z072H4500000 | ADAPTER S-CHANNEL OXIGEN | 1 | |
| Z1064 | CHARGING ADAPTERS - OXYGEN SYSTEM | 2 | |
| Z1065 | CHARGING ADAPTERS - OXYGEN SYSTEM | 3 | |
| Z1066 | CHARGING ADAPTERS - OXYGEN SYSTEM | 2 | |
| Z1067 | CHARGING ADAPTERS - OXYGEN SYSTEM | 2 | |
| ZNBT-60-1W | ADAPTER - BIAS TEE, COAXIAL | 1 | |
| ZNBT-60-1W+ | ADAPTER - BIAS TEE, COAXIAL | 1 | |
| ZP-FMA-0000 | ZP-FMA-0000;Standard Housing for Fiber Adapters | 1 | |
| f 72714-81 | Adapter Assy - Fuel QTY Sys | 1 | |
| f 72952-2 | Adapter Set FWD - Thrust Lever | 6 | |
| f 80013-1 | adapter assy - pin spanner | 14 | |
| f72952-2 | Adapter Set FWD - Thrust Lever | 6 | |
| f80013-1 | adapter assy - pin spanner | 14 | |
| lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| lC6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | 1 | |
| 2ZJJ3 | ADAPTER FITTING, ABS, 3/4 IN OD, 1/4-18 | 1 | |
| 98D71203022001 | ADAPTER-TROLLEY R/I IDG (PW AND CFM) | 5 | |
| А27021-29 | ADAPTER EQUIPMENT - CONTROL WHEELS | 1 | |
| В28002-1 | HOSE ADAPTER - SUMP FUEL DRAIN | 1 | |
| С24002-78 | JACK ADAPTER-VSCF& IDG | 1 | |
| A28005-48 | ADAPTER LEAK TEST APU 737-600-900 | 21 | |
| PWA29667 | ADAPTER DRAIN - FUEL SYSTEM DRAIN | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
