| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| B11990 | ACT LOCK | 6 | |
| C78023-2 | ACT LOCK | 13 | |
| F80048-60 | ACT LOCK | 8 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C27001-42 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS | 15 | |
| "C27051-29 | LOCKOUT SET - LEADING EDGE SLATS AND KRUEGER FLAPS ACTUATOR | 26 | |
| (CALIB) 414900GSE1-1001 | LOCK COLLAR, MFS ACTUATOR SPOILER | 1 | |
| (CALIB) 46600-11 | LOCK ACTUATOR ASSEMBLY (LH) (CALIBRATION) | 1 | |
| (CALIB) 98A52307628000 | LOCK LOCK-SAFETY,CARGO DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307515000 | SAFETY LOCK-ACTUATOR, CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52308455000 | LOCK - SAFETY, CARGO DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27051-1 | LOCK SET - LEADING EDGE SLAT AND KRUEGER FLAP ACTUATORS (CALIBRATION) | 1 | |
| (CALIB) C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) C78023-1 | T/R COWL ACTUATOR LOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87131-1 | EXTRACTR EXTRACTOR - LOCK WASHER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27005-48 | LOCK eqpt -INBD/OUTBD, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| -- | ACTUATOR LOCK ASSY-THRUST REVERSERACTUATOR CFM56-3 | 1 | |
| 000-TL-0022-39 | BRACESPROPS TO SAFELY SUPPORT THE MCD,B737 MCD ACTUATOR LOCK ASSEMBLIES | 1 | |
| 055046B | ACTUATOR, ELECTRICAL UPLOCK | 1 | |
| 100-51777 | INHIBITION LOCK, THE MANUFACTURER MENTIONED IN THE MANUAL IS ARGO-TECH CORPORATION | 1 | |
| 1048463 | CONTACT BLOCK, 1NC. (AIR START MODEL: ASU-600-150-CUP) | 1 | |
| 11MIT65B04012 | ACTUATOR LOCK - NOSE LANDING GEAR DOOR | 11 | |
| 13270S18R75 | BALL LOCK PIN D.ACTING ¿18 X 75 STEEL RING HANDLE | 1 | |
| 1830 | CONTACT BLOCK (HEAD STOCK 1830) | 1 | |
| 14143 | BLOCK: CONTACT,GRN, | 1 | |
| 17319-105 | ACTUATOR-AUX DOWNLOCK | 1 | |
| 189727-1 | TE Connectivity 189727-1 Extraction Tool For Mini Universal Mate-N-Lock Contacts | 8 | |
| 19116C10B14 | BALL LOCK SINGLE ACTING 5/8 DIA X 1.4 STEEL BUTTON | 1 | |
| 19116C12L32 | BALL LOCK SINGLE ACTING 3/4 DIA X 3.2 STAINLESS L-HANDLE | 1 | |
| 19116C5B25 | BALL LOCK SINGLE ACTING 5/16 DIA X 2.5 STAINLESS BUTTON HANDLE | 1 | |
| 196-T0121-401 | LOCK, SAFETY DOOR ACTUATOR - MLG | 1 | |
| 196T0121-401 | LOCK SAFETY DOOR ACTUATOR | 1 | |
| 197T08279-401 | SLEEVE,ACTUATOR LOCK,INBOARD DOOR | 1 | |
| 2003642 | B-4 (3060) Maintenance Stand. Foot actuated hydraulic pump, 8 Inch (20cm) heavy-duty swivel casters with brakes and swivel locks, Working height of 36-86 inches (91-218cm), Platform size of 30 x 76 inches (76-193cm), 500 lbs. (227kg) load capacity | 1 | |
| 2004082 | B-5 (3065) Maintenance Stand. Foot actuated hydraulic pump, 8 Inch (20cm) heavy-duty swivel casters with brakes and swivel locks, Working height of 88-138 inches (232-351cm), Platform size of 30 x 76 inches (76-193cm), 500 lbs. (227kg) load capacity | 1 | |
| 2117-T010-401 | DEVICE - REM/INSTL, NLG DOWNLOCK RE-LEASE ACTUATOR | 1 | |
| 2202-070 | ACTUATOR LOCK SWITCH E-190 | 1 | |
| 2310-T020-401 | DEVICE - REM/INSTL, NLG DOWNLOCK RE-LEASE ACTUATOR | 3 | |
| 2310T020-401 | ACTUATOR: UNLOCK,NLG, | 3 | |
| 2317-T010-401 | DEVICE - REM, LOCKING ACTUATOR PIN, MLG | 3 | |
| 23215-000-00 | NLG ACTUATOR LOCK SAFETY PIN | 1 | |
| 240880 | EXTRACTING NUT M6 ASSY ., FOR CRANKSHAFT LOCKING SCREW M8*50 | 1 | |
| 2775697-101 | PIN - SAFETY LOCK, UARRSI DOOR ACTUATION HANDLE | 1 | |
| 293W3922-3 | THE BOEINGCOMPANY, ACTUATOR ASSEMBLY – MLG DOOR UPLOCK | 1 | |
| 2C6646 -LMT | GAGE BLOCK, COMPRESSOR STATOR VANE ACTUATION ARM | 1 | |
| 2ME65B83948 | LOCK - RUDDER ACTUATOR | 1 | |
| 2MIT65B02310-1 | MISCELLANEOUS TOOL - INBOARD SPOILER ACTUATOR LOCKING TOOL, NUMBER 6 AND 7 | 5 | |
| 2MIT65B98000 | SECURING CLIP SET - BLOCKER DOOR DEACTIVATED TURBINE THRUST REVERSER | 1 | |
| 2SK50210-1 | FIXTURE - KRUEGER FLAPS ACTUATOR VALVE BLOCK LEAKAGE T | 1 | |
| 315A2258-2 | TR DEACTIVATION LOCK PIN | 8 | |
| 315A2801-1 | ACTUATOR ASSY-LOCKING | 1 | |
| 315A2801-3 | ACTUATOR ASSY-LOCKING | 1 | |
| 315A2801-4 | ACTUATOR ASSY-LOCKING | 1 | |
| 315A2801-5 | ACTUATOR ASSY-LOCKING | 1 | |
| 3201-04-17 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 8 | |
| 3201-0406 | BALL LOCK DOUBLE-ACTING 1/4 X 0.6" STAINLESS RING-HANDLE | 4 | |
| 3201-0410 | BALL LOCK PIN 1/4 X 1.00 RING HANDLE DOUBLE ACTING STAINLESS | 1 | |
| 3201-0411 | BALL LOCK PIN D.ACTING ¿1/4X1.1 STEEL CAD | 2 | |
| 3201-0417 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 8 | |
| 3201-0523 | BALL LOCK PIN DOUBLE ACTING | 1 | |
| 3201-0615 | BALL LOCK PIN D.ACTING ¿3/8 X 1.5 | 2 | |
| 3201-0621 | BALL LOCK PIN D.ACTING ¿3/8 X 2.1"LG STEEL CAD. | 1 | |
| 332A91-4202-00 | LOCK-WASHER EXTRACTOR | 1 | |
| 332A93-3229-00 | EXTRACTOR, LOCK NUT | 1 | |
| 332A93‐3683‐01 | LOCK WASHER EXTRACTOR | 1 | |
| 332A93‐4203‐00 | LOCK‐WASHER EXTRACTOR | 1 | |
| 355A93-3240-00 | M50 NUT LOCKING EXTRACTOR | 2 | |
| 365A93-3350-00 | M 54 LOCK NUT EXTRACTOR | 1 | |
| 365A93335000 | M 54 LOCK NUT EXTRACTOR | 1 | |
| 390700GS E2-1001 | Q400 SPOILER ACTUATOR LOCKOUT TOOL | 4 | |
| 390700GSE2-1001 | Q400 SPOILER ACTUATOR LOCKOUT TOOL | 4 | |
| 390700GSE2-1001-IAS | Q400 SPOILER ACTUATOR LOCKOUT TOOL | 1 | |
| 3936851-1 | MLG DOOR ACTUATOR LOCK | 13 | |
| 3981309-503 | LOCK ASSEMBLY (SAFETY COLLAR), SPOILER ACTUATOR. | 4 | |
| 3ME65B05730-1 | OUTBOARD ELEVATOR ACTUATOR LOCK ASSY LEFT SIDE | 7 | |
| 3ME65B05730-2 | OUTBOARD ELEVATOR ACTUATOR LOCK ASSY RIGHT SIDE | 7 | |
| 3MIT65B02300-1 | MISCELLANEOUS TOOL - INBOARD SPOILER ACTUATOR LOCKING TOOL, NUMBER 5 AND 8 | 1 | |
| 3mit65b02300-1 | SPOILER ACTUATOR LOCKING TOOL | 1 | |
| 4116C4R17 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 1 | |
| 4116C6R15 | BALL LOCK PIN D.ACTING ¿3/8 X 1.5 | 1 | |
| 414900GSE1 | LOCK COLLAR,MFS ACTUATOR SPOILER | 1 | |
| 414900GSE1 -1001 | FLAP ACTUATOR SPOILER LOCKS | 11 | |
| 414900GSE1-1001 | LOCK COLLAR, MFS ACTUATOR SPOILER | 11 | |
| 415400GSE-1001 | CLAMP LOCKING ACTUATOR RUDD | 5 | |
| 415600GSE-1001 | CLAMP LOCKING ACTUATOR ELEVATOR FOR | 7 | |
| 460001682-84 | TUBE SPANNER - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460001775-5 | HOLDING BLOCKS - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460001794-6 | PRESSURE TEST BUNG - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460002090-20 | HOLDING BLOCKS - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460003180-80 | KEEP RING - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460004330-104 | PRESS PAD - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460005171-104 | PRESS PAD - MLG LOCKSTAY ACTR A320NEO | 1 | |
| 460005171-127 | ASSEMBLY POST - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460005171-132 | ASSEMBLY POST - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460005171-133 | ASSEMBLY POST - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460005171-71 | ASSEMBLY POST - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460005171-95 | ASSEMBLY POST - MLG LOCKSTAY ACTR A320NEO | 12 | |
| 460005753 | Spanner MLG Pin Uplock Actuator F50 | 1 | |
| 460005833 | LOCK SAFETY ACTUATOR | 20 | |
| 460005835 | MLG DOOR ACTR. GROUND LOCK - A319 | 45 | |
| 460006437 | MLG REM/INST LOCK STAY ACTUATOR | 15 | |
| 460006483 | EXTRACTOR - MLG LOCKSTAY ACTR A320NEO | 5 | |
| 460006484 | PIN SPANNER - MLG LOCKSTAY ACTR A320NEO | 5 | |
| 460006487 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460006489 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006490 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006586 | EXTRACTOR - MLG LOCKSTAY ACTR A320NEO | 5 | |
| 460007280 | MLG ACT SAFETY LOCK-A320 | 27 | |
| 46600-11 | LOCK ACTUATOR ASSEMBLY (LH) | 1 | |
| 488200GSE1-1001 | LOCKING TOOL-FLAP ACTUATOR | 1 | |
| 500 | COMPACT NOSE LOCKGRI | 2 | |
| 5837827-1 | STRUT,LOCK-THRUST REVERSER ACTUATOR | 5 | |
| 604C5819-009 | ACTUATOR LOCKOUT PIN | 1 | |
| 6137-013 | PIN LOCK ACTUATOR TR | 13 | |
| 6137-060 | LOCK PIN RUDDER ACTUATOR TOOL | 9 | |
| 625C10B14 | BALL LOCK SINGLE ACTING 5/8 DIA X 1.4 STEEL BUTTON HANDLE | 1 | |
| 625C12B17 | BALL LOCK SINGLE ACTING 3/4 DIA X 1.7 STAINLESS BUTTON HANDLE | 1 | |
| 625C12B23 | BALL LOCK SINGLE ACTING 3/4 DIA X 2.3 STEEL BUTTON HANDLE | 1 | |
| 625C12L32 | BALL LOCK SINGLE ACTING 3/4 DIA X 3.2 STAINLESS L-HANDLE | 1 | |
| 625C12L36 | BALL LOCK SINGLE ACTING 3/4 DIA X 3.6 STAINLESS | 1 | |
| 625C5B25 | BALL LOCK SINGLE ACTING 5/16 DIA X 2.5 STAINLESS BUTTON HANDLE | 1 | |
| 625S6L17 | BALL LOCK PIN DIA 3/8 X 1.70" LG "L" HANDLE SINGLE ACTING | 1 | |
| 6260A6600-01 | EXTRACTOR, LOCKING RING | 1 | |
| 636-3000-28GSE | THRUST REVERSER ACTUATOR PRIMARY LOCK PIN | 8 | |
| 63813-5600 | Extractor Tool for MP-Lock™ Quick Disconnect Receptacle Terminals | 1 | |
| 6C-681-25 | CHERRYLOCK H681-6C -6 DOUBLE ACTION PULLING HEAD | 1 | |
| 6F6730G00131 | TAIL ROTOR ACTUATOR ASSEMBLY BLOCK TOOL | 1 | |
| 7034-150 | PIN - SAFETY LOCK, UARRSI DOOR ACTUATION HANDLE | 1 | |
| 71009-9 | C DUCT ACTUATOR HOLD OPEN LOCK | 1 | |
| 7300486 | CONTACT BLOCK, 1NC/1 NO.(AIR START MODEL: ASU-600-150-CUP) | 1 | |
| 737 SLAT | 737 SLAT ACTUATOR LOCK PIN | 1 | |
| 737B27-81-41-6A-1 | L/E SLAT ACT LOCK IND CHK KIT | 1 | |
| 856A1221G01 | PIN LOCKING- VSV ACT | 16 | |
| 856A1221P02 | PIN LOCKING -VSV ACT REPLACE | 1 | |
| 856A1312P20 | PIN, SINGLE ACTING-POSTIVIE LOCKING | 1 | |
| 856A1312P39 | PIN, SINGLE ACTING-POSTIVIE LOCKING | 1 | |
| 90759-1 | CRIMPING TOOL MATE&LOCK CONNECTOR CONTACT | 4 | |
| 94505A260 | BALL LOCK PIN 5/16X2Ó DBL ACTING T HANDLE | 1 | |
| 94505A315 | BALL LOCK PIN 3/8X11/2 DOUBLE ACTING | 1 | |
| 98A20003006000 | EXTRACTION TOOL SCREN HI-LOCK | 1 | |
| 98A27603002000 | Sleeve locking external airbrake and spoiler actuating jacks | 13 | |
| 98A27808021000 | HYDRAULIC LOCKING TEST EQUIPMENT-KRUEGER FLAP ACTUATOR | 3 | |
| 98A27901000000 | ACTUATOR - SPOILER 3 THRU 7 DISTRIBUTOR BLOCK - REMOVAL/INSTALLATION | 14 | |
| 98A27907509000 | TOOL SET-EXTRACTION/INSERTION SHUR LOCK | 8 | |
| 98A52301000000 | SAFETY LOCK-LDC DOOR ACTUATOR | 2 | |
| 98A52307567000 | SAFETY LOCK-UDC DOOR ACTUATOR | 1 | |
| 98A52307567001 | LOCK - SAFETY, CARGO DOOR ACTUATORS | 10 | |
| 98A52307628000 | LOCK-SAFETY,CARGO DOOR ACTUATOR | 21 | |
| 98A52307628000 | SAFETY-LOCK,CARGO DOOR ACTUATOR | 21 | |
| 98A52307628100 | LOCK SAFETY,CARGO DOOR ACTUATORSET/DOOR | 1 | |
| 98D23075150000 | SAFETYLOCK ACT CARGO | 1 | |
| 98D27407502000 | STRUT THS NEUTRAL LOCK ACTUATOR | 24 | |
| 98D27603002001 | TOOL-COTTER, SPOILER LOCKING ACTUATOR | 30 | |
| 98D27604000000 | USED TO LOCK THE SPOILERS IN THE EXTENDED POSITION BY FITTING AROUND THE SPOILER ACTUATOR RAM. | 39 | |
| 98D27803500001 | TOOL-ZERO LOCKING FLAP SLAT ACT LEVER | 35 | |
| 98D523-07515-100 | SAFETY LOCK-ACTUATOR CARGO DOORS | 14 | |
| 98D5230 7515 000 | SAFETY LOCK - ACTUATOR, CARGO DOORS | 34 | |
| 98D52307515000 | SAFETY LOCK-ACTUATOR,CARGO DOORS | 34 | |
| 98D52307515000 | CARGO DOOR ACTUATOR - SAFETY LOCK | 34 | |
| 98D523075150A1 | SAFETY LOCK-ACTUATOR(2EA) | 1 | |
| 98D52307515100 | KIT SAFETY LOCK - ACTUATOR, CARGO DOORS | 14 | |
| 98D52603001000 | (SEATING BLOCK AIRSTAIRDOOR ACT.) | 7 | |
| 98D57004000200 | REACTION BLOCK | 1 | |
| 98D57004007001 | BLOCK-SLIPPER (REAR SPAR ATTACHMENT BRACKET-ACTUATOR) | 1 | |
| 98D57004019000 | SLIPPER BLOCK(REAR SPAR ATTACHMENT BRACKET-ACTUATOR) | 15 | |
| 98D57004019001 | ATTACHMENT BRACKET-ACTUATOR SLIPPER BLOCK | 12 | |
| 98D57004080202 | REACTION BLOCK | 1 | |
| 98D71203501001 | FLAP ACTUATOR LOCK-OUT TOOL | 31 | |
| 98F27207514000 | PIN - LOCKING, BELL CRANK ASSEMBLY ACTUATOR | 13 | |
| 98F27608264000 | SAFETY COLLAR SET- ACT [ QTY 6 LOCKS ] | 10 | |
| 98F32104013000 | LOCK MAIN ACT TOOL | 25 | |
| 98F32104017101 | REACTION BLOCK | 1 | |
| 98F57004007000 | GUIDE - ACTUATOR LINK （SUPPER BLOCK） | 10 | |
| 98L52308455000 | LOCK - SAFETY, CARGO DOOR ACTUATOR | 3 | |
| 98N7830H025-000 | WAVE - UNLOCKING TR UP. ACTUATORS | 4 | |
| 98N7830H027-000 | PIN - UNLOCKING TR UP. ACTUATORS | 4 | |
| 98V27004022000 | Aileron outer actuator lock ring | 4 | |
| 98V27004025000 | Aileron inner actuator lock ring | 3 | |
| 98V27103002001 | 0 degree elevator actuator locking ring | 5 | |
| 98V27103003001 | Elevator actuator extends locking ring | 5 | |
| 98V28004006000 | LOCKING PLATE, TWIN MOTOR ACTUATOR | 1 | |
| 98V52308780000 | LOCK-SAFETY, CARGO DOOR ACTUATOR | 9 | |
| 98V57004012000 | EXTRACTOR - TRUNNION BLOCK FUSE PIN | 4 | |
| 99D52809004000 | CALIBRATION BLOCK MLG DOOR ACTUATOR LUG ULTRASONIC INSP. | 7 | |
| 9MIT65-72710 | SLAT ACTUATOR LOCKOUT TOOL | 2 | |
| ?79299501000000? | GEARED ROTARY ACTUATOR LOCK SET | 1 | |
| ?792995010500000H | SET OF LOCKING DEVICES FOR BALLSCREW ACTUATORS | 1 | |
| ?792995011000000? | BALLSCREW ACTUATOR LOCKING DEVICE FOR RAIL 3 | 1 | |
| A0110284 | DRIVE BLOCK EXTRACTOR ADAPTER | 1 | |
| A0111248 | DRIVE BLOCK EXTRACTOR ADAPTOR | 1 | |
| A0111248. | DRIVE BLOCK EXTRACTOR ADAPTOR. | 1 | |
| A09003-2 | PIN - LOCK, NLG TOWING LEVER LOCK SET - ACTUATOR, RUDDER | 33 | |
| A1-300.04 - x2 (WINGS) - 120t A1-1200.01 - x1 (NOSE) - 30t | HYDRO tripod jack set wide body with control stand A300/A310 /A330/A340 with Automatic Safety Nut Lock Manufacturer: LFT Lukassen (now Hydro)- MFD:1990 | 1 | |
| A11025 | SWAGING TOOL - UNLOCKING ACTR NLG A320NEO | 4 | |
| A11109 | EXTRACTOR - LOCK LINK PIN, NLG | 1 | |
| A11110 | EXTRACTOR LOCK LINK ACTUATOR PIN NLG | 1 | |
| A27003 | LOCK SET, RUDDER ACTUATOR (ACT. CHANGE) | 1 | |
| A27003-1 | LOCK SET, RUDDER ACTUATOR (ACT. CHANGE) | 1 | |
| A27003-16 | RUDDER ACTUATOR LOCK SET | 1 | |
| A27003-23 | LOCK SET - ACTUATOR, RUDDER | 17 | |
| A27011-1 | SPOILER ACTUATOR LOCK SET | 1 | |
| A27047-1 | TEST BLOCK - SPOILER ACTUATOR VALVE CARTRIDGE | 1 | |
| A27092-44 | ACTUATOR BLOCK | 1 | |
| A27092-46 | DEACTUATOR BLOCK | 1 | |
| A27092-48 | ACTUATOR BLOCK | 1 | |
| A27092-50 | DEACTUATOR BLOCK | 1 | |
| A27108 | LOCK SET- SPOILER ACTUATOR | 1 | |
| A27108 REV B | LOCK SET- SPOILER ACTUATOR | 1 | |
| A27108-13 | LOCK SET - SPOILER ACTUATOR | 16 | |
| A27108-13LY | LOCK, SET, SPOILER ACTUATOR 767 | 1 | |
| A27108-14 | ACTUATOR LOCK SET | 4 | |
| A27111 | LOCK ELEVATOR ACTUATOR | 1 | |
| A27111-1 | ELEV ACT LOCK | 3 | |
| A27111-11 | LOCK EQUIPMENT - ELEVATOR ACTUATOR | 15 | |
| A27115-34 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT ACTUATOR | 1 | |
| A27115-41 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT ACTUATOR | 1 | |
| A27115-45 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT ACTUATOR | 5 | |
| A32014-1 | Downlock-Prevent Accidental Retraction Of MLG | 19 | |
| A32014-2 | Downlock-Prevent Accidental Retraction Of MLG | 15 | |
| A32045-20 | WRENCH LOCK RELEASE ACTUATOR NUT | 1 | |
| A32045-23 | WRENCH INTERLOCK RELEASE ACTUATOR NUT | 1 | |
| A32045-38 | WRENCH WRENCH NLG ACTUATOR LOCKNUT | 4 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32063-7 | TEST FIXTURE - SIDE AND DRAG BRACE LOCK ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| A32064-1 | FIXTURE - TEST, MAIN LANDING GEAR (MLG) DOOR ARMING LOCKOUT ACTUATOR | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32088 | MAINTENANCE LOCK RETRACTABLE TAIL SKID | 1 | |
| A32088-1 | MAINTENANCE LOCK - RETRACTABLE TAIL SKID | 1 | |
| A32088-3 | RETRACTABLE TAIL LOCK | 2 | |
| A32088-7 | MAINTENANCE LOCK - RETRACTABLE TAIL SKID | 12 | |
| A32103-1 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 1 | |
| A330-92464-0001 | LOCKING TOOL, SPRING ACTUATORS | 1 | |
| A3T-27-016-01 | LOCKING PIN-THS ACTUATOR MECHANICAL INPUT LEVER | 1 | |
| A97130 | GUIDE CONE LOCK LINK ACTUATOR PIN NLG | 1 | |
| AB52001-NM9 | KIT SAFETY LOCK - ACTUATOR, CARGO DOORS | 1 | |
| AB52001-Y8G | KIT SAFETY LOCK - ACTUATOR, CARGO DOORS 6EA | 1 | |
| AB57001-VF8 | SLIPPER BLOCKREAR SPAR ATTACHMENT BRACKET-ACTUATOR | 1 | |
| AB78001-VS3 | PIN - LOCKOUT ACTUATOR | 1 | |
| AB78001-VS4 | PIN - LOCKOUT ACTUATOR | 1 | |
| ACG - 4AS2530000-430 | MLG ACTUATOR SAFETY LOCK | 1 | |
| ACG-4AS2530000-430 | MLG ACTUATOR SAFETY LOCK | 1 | |
| ACS87022 | Lock−out Pin − Thrust Reverser Actuator (60 mm) | 5 | |
| ACS87023-201 | PIN, LOCK-OUT-THRUST REVERSER ACTUATOR | 7 | |
| ACS87023−201 | Lock−out Pin − Thrust Reverser Actuator (5 in.) | 7 | |
| AFNDT-3152SS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 304 Stainless Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. Includes measurement Certification for the .750" Block wi... | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3348/TA6V | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. Manufactured in Accordance to ASTM E797 | 1 | |
| AGE 00652-401 | CLAMP LOCKING SPOILER ACTUATOR | 11 | |
| AGE-00652-401 | CLAMP - LOCKING, SPOILER ACTUATOR | 11 | |
| AGE-00652-403 | CLAMP - LOCKING, SPEED BRAKE ACTUA-TOR | 13 | |
| AGE-020402-401 | TEST ACTUATOR GUST LOCK | 1 | |
| AGE-02402-401 | GUST LOCK ACTUATOR TEST HARNESS | 2 | |
| AGE00652-401 | CLAMP - LOCKING, SPOILER ACTUATOR | 11 | |
| AGE00652-403 | CLAMP - LOCKING, SPEED BRAKE ACTUA-TOR | 13 | |
| AM24562 | Drive block extractor | 3 | |
| AM24562. | DRIVE BLOCK EXTRACTOR ADAPTOR. | 3 | |
| AM29792 | DRIVE BLOCK EXTRACTOR | 1 | |
| AO110284 | DRIVE BLOCK EXTRACTOR | 1 | |
| AO111248 | Drive block extractor adaptor | 1 | |
| ASTD-52-30-SJ110 | Cargo door actuator lock | 1 | |
| ATI-246500 | ASSEMBLY TOOL ROD END ADJUSTMENT & STROKE VERIFICATION UPLOCK ACTUATOR NOSE LANDING GEAR | 1 | |
| AW-C78023-1 | ASSY LOCK-TR ACTUATOR CFM56-7 | 1 | |
| B27007 | LOCK -0 SET SPOILER ACTUATOR | 1 | |
| B27007-12 | LOCKOUT ACTUATOR | 3 | |
| B27007-15 | LOCK - SET, SPOILER ACTUATOR | 19 | |
| B27007-8 | SPOILER ACTUATOR LOCK | 5 | |
| B27009-12 | LOCK-OUT EQUIPMENT - POWER CONTROL ACTUATOR, ELEVATOR | 21 | |
| B27010 | LOCK -0 AILERON ACTUATOR | 1 | |
| B27010-0 | LOCK-AILERON ACTUATOR QTY 2 | 1 | |
| B27010-1 | AILERON ACTUATOR LOCK TOOL | 5 | |
| B27010-2 | AILERON ACT LOCK TOOL | 1 | |
| B27010-5 | LOCK - AILERON ACTUATOR | 8 | |
| B27073-1 | OUTBOARD SLAT ACT. LOCKOUT | 10 | |
| B32010-4 | LOCK EQUPT. - DOOR ACT. - MLG | 1 | |
| B32012 | LOCK EQUIPMENT -0 DOOR ACTUATOR, MLG | 1 | |
| B32012-15 | Lock Assy - Door Actuator, MLG | 3 | |
| B32012-32 | MLG DOOR ACTUATOR LOCK (SET) - B757 | 7 | |
| B32012-45 | LOCK EQUIPMENT - DOOR ACTUATOR, MAIN LANDING GEAR (MLG) | 23 | |
| B32013 | LOCK -0 DOOR ACTUATOR, NOSE LANDING GEAR | 1 | |
| B32013-12 | LOCK - DOOR ACTUATOR, NOSE LANDING GEAR | 12 | |
| B32013-12-M | NLG LOCK -0 DOOR ACTUATOR | 1 | |
| B32013-13 | NLG LOCK -0 DOOR ACTUATOR | 3 | |
| B32013-15 | VALVE LOCK ACTUATOR | 1 | |
| B32013-17 | LOCK - DOOR ACTUATOR, NOSE LANDING GEAR | 17 | |
| B32013-17-M | ACTUATOR LOCK EQPT | 1 | |
| B32013-8 | NLG DOOR ACTUATOR LOCK 757 | 1 | |
| B32026 | FIXTURE -0 STAKING, ACTUATOR, NLG LOCK | 1 | |
| B32026-1 | FIXTURE - STAKING, ACTUATOR, NOSE LANDING GEAR LOCK | 3 | |
| B32030 | FIXTURE -0 LOCK ACTUATOR, OVERHAUL EQPT, NLG | 1 | |
| B32030-1 | FIXTURE - LOCK ACTUATOR, OVERHAUL EQUIPMENT, NOSE LANDING GEAR (NLG) | 3 | |
| B32033-1 | WRENCH EQUIPMENT - ALTERNATE LOCKUP RELEASE, ACTUATOR LOCK RING, MAIN LANDING GEAR (MLG) | 2 | |
| B32034-1 | WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE ACTUATOR, LOCK RING, NOSE LANDING GEAR (NLG) | 1 | |
| B32051 | SPRING EXTENDER -0 LOCK RELEASE ACTUATOR, NG & | 1 | |
| B32051-1 | SPRING EXTENDER - LOCK RELEASE ACTUATOR, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) DOOR | 5 | |
| B32065-1 | TEST FIXTURE - MAIN LANDING GEAR DOWNLOCK ACTUATOR | 1 | |
| B32069-8 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 6 | |
| B52008 | ADAPTER CLOCKING NUMBER 1 & NUMBER 2 CARGO DOOR ROTARY ACTUATOR | 1 | |
| B52008-1 | ADAPTER - CLOCKING, NUMBER 1 AND 2 CARGO DOOR ROTARY ACTUATOR | 6 | |
| B54014-1 | LOCK - 'C' DUCT ACT. RB211 ENG. | 2 | |
| B71006-79 | LOCK - ‘C’ DUCT ACTUATOR | 14 | |
| B71009 | LOCK -0 ’C’ DUCT ACTUATOR, RB211 ENGINE | 1 | |
| B71009-1 | LOCK - ’C’ DUCT ACTUATOR, RB211-535 ENGINE | 7 | |
| B71009-1-M | LOCK ACTUATOR, C-DUCT | 1 | |
| B71009-9 | LOCK - ’C’ DUCT ACTUATOR, RB211-535 ENGINE | 15 | |
| B71025-9 | LOCK - ‘C’ DUCT ACTUATOR | 11 | |
| B78001-24 | T/R LOCKOUT PIN (DEACTIVATION FOR GND MTC) | 13 | |
| B78001-43 | THRUST REVERSER ACTUATOR AND TRACK LOCK PIN KIT (GROUND ONLY) | 4 | |
| B78001-44 | Actuator Lock Assy | 1 | |
| B78003-1 | KIT PIN LOCK DEACTIV | 3 | |
| B78008-17 | SPANNER WRENCH - NUT, CYLINDER LOCKING ACTUATOR (B78008-17 INCLUDED IN B78008-19) | 6 | |
| B78008-19 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 12 | |
| B78010-28 | Stand - Functional Test Equipment, Locking and Non-Locking Thrust Reverser Actuator | 11 | |
| B78010-9 | Stand - Functional Test Equipment, Locking and Non-Locking Thrust Reverser Actuator | 2 | |
| B78011-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78011-25 | TORQUE FIXTURE - LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR ASSEMBLY | 9 | |
| B78013-1 | Overhaul Equipment - Thrust Reverser Locking Actuator Assembly | 6 | |
| B78013-2 | OVERHAUL EQUIPMENT - THRUST REVERSER LOCKING ACTUATOR ASSEMBLY | 3 | |
| B78014-1 | Test Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78014-29 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 4 | |
| B78014-37 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 8 | |
| B78015 | OVERHAUL SET-T/R LOCKING ACTUATOR ASSY | 1 | |
| B78015-17 | Overhaul Set - Thrust Reverser Locking Actuator Assembly | 5 | |
| B78015-23 | Overhaul Set - Thrust Reverser Locking Actuator Assembly | 7 | |
| B78015-39 | OVERHAUL SET - THRUST REVERSER LOCKING ACTUATOR ASSEMBLY | 7 | |
| B78016-1 | Overhaul Set - Thrust Reverser Locking and Non-Locking Actuator Assembly | 10 | |
| B78016-13 | Overhaul Set - Thrust Reverser Locking and Non-Locking Actuator Assembly | 1 | |
| B78017-1 | Installation Equipment - Bearing - Lead Screw, Thrust Reverser Non-Locking Actuator Assembly | 9 | |
| BA-G686B-S | DOUBLE ACTION CHERRYLOCK RIVETER (SPLIT VERSION OF G689) | 1 | |
| BAB890411 | BALL LOCK PIN 1/4 X 1.1" RING HANDLE DOUBLE ACTING | 1 | |
| BAB890522 | BALL LOCK PIN 5/16 X 2.20 RING HANDLE DOUBLE ACTING | 1 | |
| BB32012-45 | MLG DOOR ACTUATOR LOCK | 1 | |
| BLC5L1-16NL6C7 | PIN,LOCK-DOUBLE ACTION | 1 | |
| BLS7BS39S | BALL LOCK PIN PUSH BUTTON STEEL S.ACT. ¿7/16X3.9" | 1 | |
| BLS9LA17S | BALL LOCK STEEL ¿9/16 L-HANDLE 1.7LG. SINGLE-ACT. | 1 | |
| BPAEBS14DM | DEMO BLOCK HEX EXTRACTOR | 1 | |
| BPAETS7DM | DEMO BLOCK TORX EXTRACTOR | 1 | |
| C 27047-41 | LOCK SET - FLIGHT SPOILER ACTUATOR | 24 | |
| C-78023-1 | B737 NG THRUST REVERSER ACTUATOR LOCK | 32 | |
| C12006-14 | SPOILER ACTUATOR LOCK SET | 6 | |
| C27001 | GROUND LOCK SET OUTBOARD SPOILER ACTUATORS | 1 | |
| C27001--51 | O/B GROUND SPOILER ACTUATOR LOCK SET | 15 | |
| C27001-10 | GROUND LOCK OUTBOARD SPOILER ACTUATORS SET | 1 | |
| C27001-13 | Ground Lock Set-Outboard Spoiler Actuators | 1 | |
| C27001-16 | Ground Lock Set - Outboard Spoiler Actuators | 7 | |
| C27001-23 | GROUND LOCK SET- OUTBD SPOILER ACTUATOR | 2 | |
| C27001-24 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS | 4 | |
| C27001-25 | SPOILER O/B ACTUATOR LOCK - B737-3/4/5 | 2 | |
| C27001-26 | Ground lock set, outb spoiler act | 1 | |
| C27001-33 | Ground Lock Set - Outboard Spoiler Actuators | 2 | |
| C27001-34 | GROUND LOCK SET OUTBD SPOILER ACTUATOR | 10 | |
| C27001-35 | GRND LOCK O/B SPOILER ACTUR | 11 | |
| C27001-36 | GROUND LOCK OUTBOARD SPOILER ACTUATOR SET | 1 | |
| C27001-41 | Ground Lock Set - Outboard Spoiler Actuators | 12 | |
| C27001-42 | Ground Lock Set - Outboard Spoiler Actuators | 15 | |
| C27001-43 | LOCK ASSEMBLY - OUTBOARD SPOILER ACTUATOR | 10 | |
| C27001-51 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (CE) | 15 | |
| C27001-51 | SET GROUND LOCK OUTBOARD SPOILER ACTUATOR | 15 | |
| C27001-52 | Set - Ground Lock, Outboard Spoiler Actuators | 1 | |
| C27001-7 | GROUND LOCK SPOILER ACTUATOR | 1 | |
| C270051-29 | Lock set, LE slat & Krueger flap actu'rs | 1 | |
| C27007 | LOCK-SET SPOILER ACTUATOR | 1 | |
| C27008 | LOCK EQPT ACTUATION CONTROL FLAP | 1 | |
| C27008-14 | Lock Eqpt Flap Actuator | 4 | |
| C27008-2 | Lock Actuation Control, Flap | 2 | |
| C27008-20 | Lock Equipment - Actuation Control, Flap | 10 | |
| C27008-22 | Lock Equipment - Actuation Control, Flap | 17 | |
| C27008-42 | LOCK EQUIPMENT - ACTUATION CONTROL, FLAP | 1 | |
| C27012 | LOCKOUT SET L.E. SLAT ACTUATOR | 1 | |
| C27012-1 | L.E. SLAT ACTUATOR LOCKOUT SET | 12 | |
| C27012-14 | ACTUATOR LOCK | 10 | |
| C27012-15 | LEADING EDGE SLAT ACTUATOR LOCKOUT SET | 3 | |
| C27012-16 | L/E SLAT ACT LOCK - BOX 2 | 3 | |
| C27012-3 | L/E SLAT ACT LOCKS | 4 | |
| C27012-4 | L/E SLAT ACT LOCKS | 6 | |
| C27019-1 | TAB BENDING EQUIPMENT - LOCK WASHER, L.E. SLAT ACT | 3 | |
| C27019-1PM | TAB BENDING, EQUIP, LOCKING WASHER, LE SLAT ACT | 1 | |
| C27021-1 | Test Block-Leading Edge Actuator | 2 | |
| C27030-49 | GROUND LOCK SET -OUTBOARD SPOILERACTUATORS | 8 | |
| C27046 | LOCK SET INBOARD GROUND SPOILER ACTUATOR | 1 | |
| C27046-1 | Lock Set - Inboard Ground Spoiler Actuator | 9 | |
| C27046-11 | SET - LOCK, INBOARD GROUND SPOILER ACTUATOR (CONTAINS 4 LOCK ASSEMBLIES) | 1 | |
| C27046-13 | Lock Set - Inboard Ground Spoiler Actuator | 26 | |
| C27046-14 | Lock Set Inboard GRD Spoiler Act | 6 | |
| C27046-17 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR | 1 | |
| C27046-2 | INBOARD SPOILER ACTUATOR LOCK | 6 | |
| C27046-21 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR | 3 | |
| C27047 | LOCK SET FLIGHT SPOILER ACTUATOR | 2 | |
| C27047- 43 | LOCK SET - FLIGHT SPOILER ACTUATOR | 15 | |
| C27047-1 | LOCK SET, FLIGHT SPOILER ACTUATOR | 5 | |
| C27047-16 | KIT, LOCK SET-SPOILER ACTUATOR | 6 | |
| C27047-19 | Lock Set - Flight Spoiler Actuator | 9 | |
| C27047-2 | FLIGHT SPOILER ACTUATOR LOCK ASSY | 1 | |
| C27047-20 | Lock Set - Flight Spoiler Actuator | 4 | |
| C27047-21 | LOCK SET - FLIGHT SPOILER ACTUATOR | 4 | |
| C27047-22 | Lock Set Flight Spoiler Act | 3 | |
| C27047-41 | Lock Set - Flight Spoiler Actuator | 24 | |
| C27047-42 | Lock Set - Flight Spoiler Actuator | 13 | |
| C27047-42/9N7047-42 | LOCK SET, FLIGHT SPOILER ACTUATOR | 1 | |
| C27047-43 | Lock Set - Flight Spoiler Actuator | 15 | |
| C27047-43SPOILER | LOCKSET-FLIGHT ACTUATOR | 1 | |
| C27047-44 | LOCK SET FLIGHT SPOILER ACT -BOX 2 | 9 | |
| C270471-41 | LOCK SET FLT SPOILER ACT | 1 | |
| C27051 | LOCK SET LE SLAT AND KRUEGER FLAP ACTUATORS | 3 | |
| C27051-1 | Lock Set - Leading Edge Slat and Krueger Flap Actuators | 17 | |
| C27051-2 | L/E FLAP AND SLAT ACTUATOR LOCK SET | 9 | |
| C27051-2 | LOCK OUT SET LEADING EDGE KRUGER FLAP and SLAT ACTUATOR | 9 | |
| C27051-29 | Lock Set - Leading Edge Slat and Krueger Flap Actuators | 26 | |
| C27051-3 | LEADING EDGE SLAT ACTUATOR LOCK SET | 3 | |
| C27051-30 | L/E FLAP AND SLAT ACTUATOR LOCK SET | 6 | |
| C27059-1 | Test Block Equipment -Leading Edge Flap And Slat Actuator | 3 | |
| C27062-1 | Test Block - Cartridge Valve, Flight Spoiler Actuator | 3 | |
| C27091 | Lock Set - Flight Spoiler Actuator (Contains 8 Lock Assemblies) | 1 | |
| C27091-1 | KIT LOCK SPOILER ACT | 1 | |
| C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR | 13 | |
| C27107-2 | Set - Lock, Flight Spoiler Actuator (Contains 8 Lock Assemblies) | 4 | |
| C271107-1 | FLIGHT SPOILER ACTUATOR LOCK SET | 1 | |
| C32048-1 | MAIN GEAR UPLOCK ACTUATOR INSTALLATION | 15 | |
| C47281 | NLG DOOR ACTUATOR LOCKS | 7 | |
| C47281-1000 | NLG DOOR ACTUATOR LOCKS | 6 | |
| C47940 | C47940 EXTRACTOR LOCKWASHER OF THE SCISSORS MIDDLE PIN NUT | 7 | |
| C78004-1 | Lockpin Equipment - Thrust Reverser Actuation Module Lockout | 29 | |
| C78004-2 | PIN, LOCK TR ACTUATION | 26 | |
| C78006 | ACTUATOR LOCK ASSY THRUST REVERSER ACTUATOR CFM56-3 | 1 | |
| C78006-1 | ACTUATOR LOCK | 34 | |
| C78006-2 | THRUST REVERSER ACTUATOR LOCK | 2 | |
| C7800G-1 | T/R ACTUATOR LOCK | 1 | |
| C78023 | LOCK ASSY THRUST REVERSER ACTUATOR CFM56-7 | 1 | |
| C78023-1 | Lock Assembly - Thrust Reverser Actuator, CFM56-7 | 32 | |
| C78023-1 | LOCK THRUST REVERSER ACTUATOR | 32 | |
| C78023-13 | LOCK ASSEMBLY - THRUST REVERSER ACTUATOR, CFM56-7 | 7 | |
| C78023-1 | ASSEMBLY – LOCK , THRUST REVERSER ACTUATOR , CFM56-7 ( CONTAINS 2 LOCKS ) | 32 | |
| C78023-2 | LOCK - T/R ACTUATOR | 13 | |
| C78027-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator Assembly | 4 | |
| C78030-1 | Gap Measurement Gauge - Thrust Reverser Actuator System Locking Actuator | 13 | |
| C78030-1 | GAUGE GAP MEASUREMENT TRAS LOCKING ACTUATOR | 13 | |
| C78030-10 | Gap Measurement Gauge - Thrust Reverser Actuator System Locking Actuator | 3 | |
| C78030-18 | GAP MEASUREMENT GAUGE - THRUST REVERSER ACTUATOR SYSTEM LOCKING ACTUATOR | 3 | |
| C78035-1 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE (CE) | 12 | |
| C78035-14 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE (CE) | 9 | |
| C78035-2 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE | 3 | |
| C78035-3 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE | 1 | |
| C78041-1 | GUIDE PIN - LOCKSLEEVE, THRUST REVERSER ACTUATOR | 1 | |
| C78042-17 | GAUGE - FREE PLAY CHECK, THRUST REVERSER LOCKING ACTUATOR | 1 | |
| C78042-23 | GAUGE-FREE PLAY CHECK TR LOCKING ACTUATOR | 3 | |
| C78042-30 | GAUGE-FREE PLAY CHECK TR LOCKING ACTUATOR | 3 | |
| CAT5881-15 | NLG RETRACTION ACTUATOR LOCK SPACER | 1 | |
| CG2042000-001 | ELEVATOR PRIMARY ACTUATION LOCK OUT TOOLS | 1 | |
| CH723-259 | BRACKET-LOCKING THS HYDROMECH ACTU.NUT | 2 | |
| CH723259 | BRACKET-LOCKING THS HYDROMECH ACTU.NUT | 2 | |
| CH723435 | PIN - LOCKING THS ACTUATOR MECH. CONTROL | 1 | |
| CL-10-BLPL-3.5 | BALL LOCK L-HANDLE SINGLE ACTING PIN 5/8 X 3.5 STEEL | 1 | |
| CL-3-BPDR-0.60-S | BALL LOCK PIN D.ACT. RING HANDLE 3/16X0.6 STAINLESS STEEL | 1 | |
| CL-3-BPDR-1.50-S | BALL LOCK PIN D.ACT 3/16 X 1.50 STAINLESS STEEL | 1 | |
| CL-4-BLPB-1.00-S | BALL LOCK PIN 1/4 X 1.00 SINGLE ACTION BUTTON STAINLESS | 1 | |
| CL-4-BLPL-1.00-S-4BALL | BALL LOCK SINGLE ACTING L-HANDLE 1/4 DIA X 1.00 STAINLESS 4BALL | 1 | |
| CL-4-BPDL-3.50-S | BALL LOCK DBL ACTING 1/4 X 3"1/2 STAINLESS | 1 | |
| CL-4-BPDL-4.50-S | BALL LOCK DBL ACT L-HAND. PIN 1/4 X 4"1/2 LG INOX. | 1 | |
| CL-4-BPDR-1.00 | DOUBLE ACTING BALL LOCK PIN 1/4 X 1.00 RING HANDLE | 1 | |
| CL-4-BPDR-1.50 | DOUBLE ACTING BALL LOCK PIN | 1 | |
| CL-4-BPDR-1.50-S | BALL LOCK PIN D. ACTING RING H. ¿1/4 X 1.5" ST.STEEL | 2 | |
| CL-6-BLPT-2.50-S | BALL LOCK SINGLE ACTION 3/8 X 2.50 STAINLESS T-HANDLE | 2 | |
| CL-7-BLPT-2.40-S | BALL LOCK SINGLE ACTION 7/16 X 2.40 STAINLESS T-HANDLE | 1 | |
| CL-7-BLPT-2.60-S | BALL LOCK SINGLE ACTION 7/16 X 2.60 STAINLESS T-HANDLE | 1 | |
| CL-7-BLPT-5.50-S | BALL LOCK SINGLE ACTION 7/16 X 5.50 STAINLESS T-HANDLE | 1 | |
| CL5BPDT3-00C | DOUBLE ACTING BALL LOCK PIN | 1 | |
| CLM-8-BPDR-25 | BALL LOCK PIN D.ACTING ¿M8X25mmLG. STAINLESS ST. | 1 | |
| CP30538/1 | LOCK - ‘C’ DUCT ACTUATOR | 1 | |
| D46485 | EXTRACTOR, LOCK WASHER, M | 7 | |
| D97B00-003 | ACTUATOR LOCK SUPPO | 17 | |
| D97E00-606 | PLATE-ACTUATOR LOCK | 1 | |
| DAH602734 | MLG DOOR ACTUATOR，GROUNDLOCK SLEEVE | 8 | |
| DZZ0007-1 | SPOILER ACT OVERIDE LOCK | 1 | |
| DZZ7900-1 | THRUST REVERSER ACTUATOR LOCK | 1 | |
| EC-1607 | BLOCK, AUXILARY CONTACT, | 1 | |
| EC-1946-MX02 | CONTACT BLOCK W/ LATCH | 1 | |
| F27080100 | DRIVE BLOCK EXTRACTOR | 1 | |
| F47127 | EXTRACTOR - UNLOCKING ACTR NLG A320NEO | 3 | |
| F70064 | LOCK ASSY-L.E. WING FLAP ACTUATOR USE TO | 1 | |
| F70157 | LOCK ASSY -0 CARGO DOOR ACTUATOR USED TO LOCK | 1 | |
| F7020035 | SET - LOCK, INBOARD GROUND SPOILER ACTUA | 16 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F71264 | LOCK ASSY -0 SPOILER ACTUATOR USED TO PREVENT | 1 | |
| F71264-500 | Lock assembly-spoiler actuator | 1 | |
| F71264-501 | Lock assembly-spoiler actuator | 1 | |
| F71267 | WRENCH ASSY, PINION GEAR, STABILIZER TRIM ACTUATOR (LOCK) | 25 | |
| F71288 | JIG ASSY-NOSE GEAR LOCK ACTUATOR USED DURING | 1 | |
| F71313-12 | M.G. LOCK ACTUATOR | 2 | |
| F71313-7 | LG LOCK ACTUATOR ASS | 3 | |
| F72731-81 | ACT LOCKOUT FITTING | 7 | |
| F72748 | Ground lock-retractable tail skid | 1 | |
| F72979 | PROTRACTOR -0 SPOILER LOCKOUT INSTL. MAIN GEAR. | 1 | |
| F72979-1 | MLG PROTRACTOR SPOILER LOCKOUT INST | 5 | |
| F72985 | ACTUATOR -0 LOCK OUT FITTING, L.E. SLAT NO. 4&5 | 1 | |
| F72985-1 | Actuator-lock out fitting，L.E. slat No. 4&5 | 1 | |
| F73012-1 | SWAGING EQUIPMENT - ROLLER, LOCK ACTUATOR BARREL, MAIN LANDING GEAR | 1 | |
| F80-0-1874 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| F80-0-1875 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| F80017 | FLIGHT SPOILER ACTUATORS LOCK SET | 1 | |
| F80017-1 | GROUND LOCK SET-OUTBOARD SPOILER ACTUATORS | 1 | |
| F80017-19 | LOCK SPOILER ACTUATOR | 11 | |
| F80017-23 | LOCK SPOILER ACTUATOR | 12 | |
| F80017-33 | LOCK, SPOILER ACTUATOR | 20 | |
| F80040 | GROUND SPOILER ACTUATORS LOCK SET | 1 | |
| F80040-1 | LOCK ASSEMBLY, GROUND SPOILER ACTUATOR | 1 | |
| F80040-15 | GROUND SPOILER ACTUATOR LOCK - B737 | 16 | |
| F80040-2 | SPOILER ACT LOCK | 28 | |
| F80040-2 -15 | Lock Assembly. Ground Spoiler Actuator | 1 | |
| F80040-20 | SET OF INBOARD SPOILER ACTUATOR LOCKS | 1 | |
| F80048 | LOCK ASSEMBLY LEADING EDGE FLAP AND SLAT ACTUATORS | 1 | |
| F80048-1 | LOCK - LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-2 | LOCK - LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-3 | LOCK - LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-36 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-37 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-38 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-39 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-40 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-41 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-42 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-43 | Lock assembly - Leading Edge Flap And Slat Actuators | 1 | |
| F80048-57 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 7 | |
| F80048-58 | SLAT ACTUATOR LOCK | 10 | |
| F80048-59 | SLAT L/E LOCK - B737-200 ACT. 3, 4 | 8 | |
| F80048-60 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 8 | |
| F80048-61 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 1 | |
| F80048-62 | LOCK - LEADING EDGE FLAP AND SLAT ACTUATO | 3 | |
| F80048-78 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 3 | |
| F80048-79 | SLAT ACTUATOR LOCK | 4 | |
| F80048-84 | FLAP L/E ACTUATOR LOCK - 1,2,3,4 | 16 | |
| F80048-87 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 1 | |
| F80048-88 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 2 | |
| F80048-89 | LE FLAP ACTR LOCK | 14 | |
| F80048-89 PM | FLAPS ACTUATOR LOCKS | 1 | |
| F80048-9 | LOCK SET, LEADING EDGE FLAP ACTUATOR | 1 | |
| F80048-90 | LE FLAP ACTR LOCK | 13 | |
| F80048-95 | LOCK ASSEMBLY - LEADING EDGE FLAP AND SLAT ACTUATORS | 3 | |
| F80048-XX | Lock Assembly -Leading Edge Flap And Slat Actuators | 1 | |
| FDOO03D23654000E | LOCKING DIVICE, N.L.G ACTUATOR | 1 | |
| G25005-1 | SWITCH ACTUATOR - DOOR INTERLOCK SWITCH, GALLEY CART LIFT | 1 | |
| G27001 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 5 & | 1 | |
| G27001-1 | LOCK OPEN EQUIPMENT - INBOARD SPOILER ACTUATOR NUMBER 5 AND NUMBER 8 | 10 | |
| G27002 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 6 & | 1 | |
| G27002-1 | LOCK OPEN EQUIPMENT - INBOARD SPOILER ACTUATOR NUMBER 6 AND NUMBER 7 | 10 | |
| G27007-1 | LOCK OPEN EQUPT. - INBD SPOILER ACT 5 & 8 | 1 | |
| G27008 | LOCK EQPT -0 RUDDER ACTUATOR | 1 | |
| G27008-19 | LOCK EQUIPMENT - RUDDER ACTUATOR | 9 | |
| G27008-41 | LOCK EQUIPMENT - RUDDER ACTUATOR | 3 | |
| G27032 | ACTUATOR LOCK -0 OUTBOARD SPOLER | 1 | |
| G27032-1 | ACTUATOR LOCK - OUTBOARD SPOILER | 3 | |
| G27032-14 | ACTUATOR LOCK - OUTBOARD SPOILER | 4 | |
| G27032-8 | ACTUATOR LOCK - OUTBOARD SPOILER | 10 | |
| G27032-8-M | ACTUATOR LOCK | 1 | |
| G27032-9 | ACTUATOR LOCK | 1 | |
| G27057-1 | HOLD OPEN LOCK - INBOARD SPOILER ACTUATOR | 2 | |
| G32003 | TEST SET -0 NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32003-19 | TEST SET - NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32003-34 | TEST SET - NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32003-76 | TEST SET - NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32003-77 | TEST SET - NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32003-78 | TEST SET - NOSE GEAR INTERLOCK ACTUATOR | 1 | |
| G32035 | TEST FIXTURE -0 DOWNLOCK ACTUATOR, WLG & BLG | 1 | |
| G32035-1 | TEST FIXTURE - DOWNLOCK ACTUATOR, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| G601R276202-27 | Spoiler actuator lock | 9 | |
| G686B-S | DOUBLE ACTION CHERRYLOCK RIVETER (SPLIT VERSION OF G689) | 1 | |
| G746ACMRW | G746A Power Riveter Kits (Installs: -4, -5, -6 CherryMAX*) (Add to cart: Contact us to order) (Installs: SST & -3, -4, -5, -6 CherryLock 'A') (Add to cart: Add To Cart) | 1 | |
| G784 | CherryLOCK G784 Double Action Pneumatic Hydraulic Power Riveter | 13 | |
| G83AKT | G83A Installation Tool Kits (Installs: 5/32" & 3/16" MS Blind Bolt & LockBOLT, 1/8", 5/32) (Add to cart: Contact us to order) | 2 | |
| G83BKT | G83A Installation Tool Kits (Installs: 5/32" & 3/16" MS Blind Bolt & LockBOLT, 1/8", 5/32) (Add to cart: Contact us to order) (Installs: 5/32" & 3/16" MS Blind Bolt & NAS Style LockBOLT) (Add to cart: Contact us to order) | 1 | |
| G84MBK | G84 Installation Tool Kits (Installs: 5/32", 3/16" & 1/4" NAS Style LockBOLT) (Add to cart: Add To Cart) (Installs: 5/32", 3/16" & 1/4" MS Blind Bolt) (Add to cart: Contact us to order) | 3 | |
| GA47340-240 | END FITTING - UNLOCKING ACTR NLG A320NEO | 3 | |
| GA47834-240 | END FITTING - UNLOCKING ACTR NLG A320NEO | 1 | |
| GR000066 | DRIVE BLOCK EXTRACTOR | 1 | |
| GS20976-1 | INSTAL THE PITCHLOCK SCREW DURIN ACTUATOR ASSEMBLY | 2 | |
| GS21010-1 | INSTAL THE PITCHLOCK SCREW DURIN ACTUATOR ASSEMBLY | 2 | |
| GSE 066 | SPOILER ACTUATOR LOCKING CLAMP | 1 | |
| GSE 067 | SPEED BRAKE ACTUATOR LOCKING CLAMP | 1 | |
| GSE-066 | CLAMP- LOCKING, SPOILER ACTUATOR | 1 | |
| GSE-067 | CLAMP- LOCKING, SPEED BRAKE ACTUATOR | 1 | |
| GSE086 | FLAP ACTUATOR SPOILER LOCKS | 1 | |
| GSE55759 | Aft axle unlock actuator safety pin | 1 | |
| GSE55912 | CONE -GUIDE, UNLOCK ACTUATOR WLG | 1 | |
| GSE57669NC | PIN AXLE UNLOCK ACTUATOR | 1 | |
| H 26-205-10 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) | 1 | |
| H 26-205-4 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) | 1 | |
| H 26-205-5 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-205-6 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-205-8 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-225-10 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-225-12 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-225-5 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-225-6 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H 26-225-8 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| H46836 | GUIDE NLG UNLOCKING ACT PIN | 5 | |
| H513-04-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) | 1 | |
| H513-04-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513-04-60 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513-05-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513-06-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513-06-60 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513-08-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513S-05-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513S-05-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-06-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-06-24 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513S-06-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-06-48 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-08-24 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-08-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-08-48 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-10-27 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 3 | |
| H513S-10-42 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 4 | |
| H513S-12-27 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513S-12-42 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513SR-05-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-05-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-06-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513SR-06-24 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-06-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-06-48 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-08-24 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513SR-08-48 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-10-27 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-10-42 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 2 | |
| H513SR-12-27 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SR-12-42 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SRC-05-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SRC-05-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SRC-06-20 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SRC-06-35 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H513SRC-08-48 | Cherry® LockBOLT Pulling Heads (Installed length: 2" (51 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) (Add to cart: Contact us to order) (Installed length: 3-1/2" (89 mm)) (Lockbolt diameter: 1/8") (Type: Basic Pulling Short Pintail) | 1 | |
| H563-4B | Cherry® Offset Lockbolt Pulling Heads (Type: Basic Pulling) (Lockbolt diameter: 1/8") (Add to cart: Contact us to order) | 1 | |
| H563-6B | Cherry® Offset Lockbolt Pulling Heads (Type: Basic Pulling) (Lockbolt diameter: 1/8") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 3/16") (Add to cart: Contact us to order) | 1 | |
| H563-8B | Cherry® Offset Lockbolt Pulling Heads (Type: Basic Pulling) (Lockbolt diameter: 1/8") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 3/16") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 1/4") (A | 1 | |
| H563SP-4B | Cherry® Offset Lockbolt Pulling Heads (Type: Basic Pulling) (Lockbolt diameter: 1/8") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 3/16") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 1/4") (A | 1 | |
| H563SP-5B | Cherry® Offset Lockbolt Pulling Heads (Type: Basic Pulling) (Lockbolt diameter: 1/8") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 3/16") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 1/4") (A | 1 | |
| H563SP-6B | Cherry® Offset Lockbolt Pulling Heads (Type: Basic Pulling) (Lockbolt diameter: 1/8") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 3/16") (Add to cart: Contact us to order) (Type: Basic Pulling) (Lockbolt diameter: 1/4") (A | 1 | |
| H681-4C | CherryLOCK H681-4C -4 Double Action Pulling Head | 9 | |
| H681-5C | CherryLOCK H681-5C -5 Double Action Pulling Head | 6 | |
| H681-6C | CherryLOCK H681-6C -6 Double Action Pulling Head | 8 | |
| H9055-5 | CherryLOCK® 'A' H955 & H9055 Straight Pulling Heads (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Rivet diameter: 5/32") (Add to cart: Contact us to order) | 1 | |
| H9055-6 | CherryLOCK® 'A' H955 & H9055 Straight Pulling Heads (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Rivet diameter: 5/32") (Add to cart: Contact us to order) (Rivet diameter: 3/16") (Add to cart: Conta | 3 | |
| H955-3 | CherryLOCK® 'A' H955 & H9055 Straight Pulling Heads (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Rivet diameter: 5/32") (Add to cart: Contact us to order) (Rivet diameter: 3/16") (Add to cart: Conta | 3 | |
| H955-4 | CherryLOCK® 'A' H955 & H9055 Straight Pulling Heads (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Rivet diameter: 5/32") (Add to cart: Contact us to order) (Rivet diameter: 3/16") (Add to cart: Conta | 3 | |
| H955-5 | CherryLOCK® 'A' H955 & H9055 Straight Pulling Heads (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Rivet diameter: 5/32") (Add to cart: Contact us to order) (Rivet diameter: 3/16") (Add to cart: Conta | 4 | |
| H955-6 | CherryLOCK® 'A' H955 & H9055 Straight Pulling Heads (Rivet diameter: 3/32") (Add to cart: Add To Cart) (Rivet diameter: 1/8") (Add to cart: Add To Cart) (Rivet diameter: 5/32") (Add to cart: Contact us to order) (Rivet diameter: 3/16") (Add to cart: Conta | 5 | |
| HIX3005 | ACTUATOR LOCK | 30 | |
| HS 26-200-4 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-200-5 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-200-6 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-200-8 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-220-10 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-220-12 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-220-4 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-220-5 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-220-6 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HS 26-220-8 | Huck & Hi-Shear Squeezer Sets (Shank size: Huck Lockbolt .187") (Rivet size: 5/16") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 1/8") (Add to cart: Contact us to order) (Shank size: Huck Lockbolt .187") (Rivet size: 5 | 1 | |
| HU41599 | REACTION BLOCK | 1 | |
| HU87114-2 | COLLAR - HOLD OPEN PIVOT DOOR ( ONLY FOR RR TRENT 700 ENGINE, THIS TOOL IS USED TO SAFETY LOCK FOR LH/RH PIVOT DOOR ACTUATORS. ) | 1 | |
| HU87131 | 1 - EXTRACTOR - LOCK WASHER | 1 | |
| HU87131-1 | EXTRACTOR - LOCK WASHER | 13 | |
| HU87132 | COLLAR - HOLD OPEN PIVOT DOOR ( ONLY FOR RR TRENT 700 ENGINE, THIS TOOL IS USED TO SAFETY LOCK FOR LH/RH PIVOT DOOR ACTUATORS. ) | 13 | |
| HU87133 | EXTRACTOR - LOCK WASHER | 12 | |
| IAE1N20010 | PIN - LOCKOUT ACTUATOR | 28 | |
| IAE1N20049 | PIN - LOCKOUT ACTUATOR | 24 | |
| IAE1N2009 | PIN LOCK ACT | 1 | |
| IAE1R18891 | VSV ACTUATOR LOCK PIN | 23 | |
| IAN1N20049 | PIN LOCK OUT ACTUATOR | 1 | |
| IP80D | 1/2" DRIVE SWIVEL BALL LOCK BUTTON IMPACT UNIVERSAL JOIN | 1 | |
| J21999 | FLOW LIMITING TEST FIXTGURE - UNLOCKING ACTR NLG A320NEO | 1 | |
| J27002-1 | LOCK, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 12 | |
| J27002-14 | Ball nut lock-actuator，horizontal stabilizer | 2 | |
| J270021 | LOCK - HORIZONTAL STAB ACT BALL NUT | 12 | |
| J27005 | LOCK SET-INBD/OUTBD,SPOILER ACTUATOR | 1 | |
| J27005-28 | LOCK-INBD&OTBD SPOILER ACTUATOR | 1 | |
| J27005-33 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 6 | |
| J27005-35 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 1 | |
| J27005-48 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 9 | |
| J27005-48 repair | Lock eqpt-inbd/outbd，spoiler actuator | 1 | |
| J27005-63 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 1 | |
| J27005-64 | Lock eqpt-inbd/outbd，spoiler actuator | 7 | |
| J2700548 | LOCK EQUIP - INB/OB SPOILER ACT | 9 | |
| J27028-1 | LOCK RUDDER ACTUATOR | 1 | |
| J27028-21 | Lock Rudder Actuator | 13 | |
| J27031-1 | Set Lock Spoiler Actuators | 1 | |
| J27160-1 | UNLOCK TOOL - LEADING EDGE SLAT, GEARED ROTARY ACTUATOR (GRA) | 1 | |
| J32071-10 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 11 | |
| J47565 | PIN LOCK ACTUATOR T/ | 16 | |
| J47587 | GUIDE CONE, UNLOCK ACT/LOCK LINK ATTACH PIN | 15 | |
| J55002-37 | LOCK ASSY AND FREE PLAY STABILISER ACT. | 10 | |
| J71007-7 | REACTION BLOCK | 1 | |
| K27016 | LOCK HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27016-1 | LOCK - HORIZONTAL STABILIZER ACTUATOR BALL NUT | 9 | |
| K27016-1 | LOCK-HORIZONTAL STABILIZERACTUATOR BALL NUT | 9 | |
| K27016-2 | LOCK-HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27016-4 | LOCK-HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| K27017 | LOCK EQUIPMENT - INB'D / OUTB'D SPOILER ACTUATOR | 1 | |
| K27017-1 | Lock Equipment - Spoiler Hydraulic Actuator | 1 | |
| K27017-10 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-12 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-14 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-15 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-16 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-17 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-18 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-2 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-22 | LOCK EQUIPMENT - SPOILER HYDRAULIC ACTUATORS (CE) | 10 | |
| K27017-23 | Outboard Lock - Spoiler Hydraulic Actuator | 1 | |
| K27017-24 | Inboard Lock - Spoiler Hydraulic Actuator | 1 | |
| K27017-3 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-36 | LOCK EQUIPMENT - SPOILER HYDRAULIC ACTUATORS (CE) | 5 | |
| K27017-46 | LOCK EQUIPMENT - SPOILER HYDRAULIC ACTUATORS (CE) | 8 | |
| K27017-46 | LOCK EQUIPMENT-SPOILER HYDRAULICACTUATORS | 8 | |
| K27017-6 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-7 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27017-9 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | 1 | |
| K27061 | Lock-out Eqpt, Spoiler Electro Mechnical Actuator | 1 | |
| K27061-1 | LOCK-OUT EQUIPMENT - SPOILER ELECTRO MECHANICAL ACTUATOR (CE) | 9 | |
| K27061-1 | LOCK-OUT EQPT-SPOILERELECTRO MECHANICAL ACTUATOR | 9 | |
| K78006-1 | T/R ISOLATION VALVE LOCK MEASURING TOOL ELECTRIC MOTOR ACTUATOR | 11 | |
| KT8000H06 | SELF LOCKING BUSHING EXTRACTOR | 1 | |
| M46186 | EXTRACTOR - UNLOCKING ACTR NLG A320NEO | 3 | |
| M46188 | CASTELLATED WRENCH - UNLOCKING ACTR NLG A320NEO | 3 | |
| M46194 | CASTELLATED WRENCH - UNLOCKING ACTR NLG A320NEO | 3 | |
| M81714/69-01 | EXTRACT TOOL - TERMINAL BLOCK | 4 | |
| ME65B80713-1 | LOCK - BALLNUT, HORIZONTAL STABILIZER ACTUATOR | 8 | |
| MIT65B01463 | SHIM - DOWNLOCK ACTUATOR REMOVAL AND INSTALLATION, BODY LANDING GEAR | 1 | |
| MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| MR4-1015-320-T | SAFETY LOCK-ACTUATOR,CARGO DOORS (LATAM BRAZIL) | 1 | |
| MT1025 | BENCH CLAMP - MLG LOCKSTAY ACTR A320NEO | 2 | |
| NCS 64011 | TOOL - BLOCKER DOOR BUSH INSERT/EXTRACT | 2 | |
| NCS64011 | Tool − Blocker Door Bushing Insert/Extract | 2 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| OU190360 | LOCKING RIGGING PIN-THS ACTUATOR MECHANICAL INPUT LEVER | 31 | |
| P701-05-20 | BALL LOCK PIN DOUBLE ACTING 5/16X2 | 1 | |
| PF51-103-3 | SPEED BRAKE ACTUATOR LOCKING CLAMP | 3 | |
| PWA101184 | ACTUATOR LOCK | 1 | |
| PWA86344 | LOCK - ACTUATOR, HPC VARIABLE STATOR VANE RIGGING | 6 | |
| PWA88013 | PIN, UNLOCK - THRUST REVERSER ACTUATOR | 5 | |
| PWA88014 | PIN, LOCK - THRUST REVERSER ACTUATOR | 5 | |
| PWC60679 | TOOL, EXTRACTOR, GARLOCK SEAL | 4 | |
| Q21941 | EXTRACTOR - UNLOCKING ACTR NLG A320NEO | 2 | |
| Q47244 | WRENCH FOR ADJUSTABLE END FITTING LOCK NUT OF RETRACTION STRUT (MLG) | 1 | |
| RBE332A93-3229-00 | Extractor, Lock Nut | 2 | |
| RBT18561-21 | Extract Tool - Terminal Block | 1 | |
| RBT18561-23 | Extract Tool-Terminal Blocks | 1 | |
| RBW6730G00131-6F | TAIL ROTOR ACTUATOR ASSEMBLY BLOCK TOOL | 2 | |
| RSE1244 | FLAP ACTUATOR LOCKS - B737CL | 11 | |
| SB7P376A0002-00 | ACTUATOR - SPOILER 3 THRU 7 DISTRIBUTOR BLOCK - REMOVAL/INSTALLATION | 1 | |
| SE78-3010 | COMPRESSOR -0 TR LOCK ACTUATOR RING TO COMPRESS | 1 | |
| SK04-2097 | END FITTING - UNLOCKING ACTR NLG A320NEO | 1 | |
| SK20978-1004 | END FITTING - UNLOCKING ACTR NLG A320NEO | 1 | |
| SK30420 | HYDRAULIC SUPPLY UNIT - UNLOCKING ACTR NLG A320NEO | 1 | |
| SL90-310-1-1250 | STA LOCK EXTRACTION TOOL | 7 | |
| SL90-310-7500 | STA LOCK EXTRACTION TOOL | 7 | |
| SL90-314-1-0000 | TOOL-EXTRACT° TAB WASHER STA-LOCK(SJN-162) | 9 | |
| SL90-314-10000 | STA LOCK EXTRACTION TOOL | 9 | |
| SL90-314-3750 | STA LOCK EXTRACTION TOOL | 20 | |
| SL90-314-4375 | STA LOCK EXTRACTION TOOL | 11 | |
| SL90-314-5000 | STA LOCK EXTRACTION TOOL | 15 | |
| SL90-314-5625 | STA LOCK EXTRACT.TOO | 25 | |
| SL90-314-6250 | STA LOCK EXTRACT.TOO | 18 | |
| SL90-314-7500 | STA LOCK EXTRACT.TOO | 24 | |
| SL90-350-7500 | STA LOCK EXTRACTION TOOL | 21 | |
| SL90-374-1-5625 | STA LOCK EXTRACTION TOOL | 4 | |
| SL90-627-3125 | STA LOCK EXTRACTION TOOL | 13 | |
| SPL-10253 | MLG DOOR ACTUATOR LOCK EQUIPMENT | 1 | |
| SPL-10892 | HOLD OPEN LOCK - INBOARD SPOILER ACTUATOR | 1 | |
| SPL-14240 | B737NG LOCK SETFLIGHT SPOILER ACTUATOR | 1 | |
| SPL-14551 | LOCK ASSEMBLY, T/R ACTUATOR | 1 | |
| SPL-14632 | FLIGHT SPOILER ACTUATOR LOCK SET | 1 | |
| SPL-14993 | LOCK - THRUST REVERSER OPENING ACTUATOR, 15 DEGREE | 1 | |
| SPL-15435 | GAP MEASUREMENT GAUGE - TRAS LOCKING ACTUATOR | 1 | |
| SPL-1693 | LOCK EQUIPMENT, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 1 | |
| SPL-1744 | B737NG LOCK SET - INBOARD GROUND SPOILER ACTUATOR | 1 | |
| SPL-2418 | LOCKPIN - EQUIPMENT, THRUST REVERSER ACTUATION MODULE LOCKOUT | 1 | |
| SPL-2431 | LOCK, THRUST REVERSER ACTUATOR | 1 | |
| SPL-5375 | LE Slat Actuator Lock Washer Tab Bending Tool | 1 | |
| SPL-5376 | Test Block Leading Edge Actuator | 1 | |
| SPL-7795 | LOCK ACTUATOR | 1 | |
| SPL5586 | LOCK SET-FLIGHT SPOILER ACTUATOR | 1 | |
| SPRT500 | RETRACTABLE PLUNGER/NON-LOCKING | 1 | |
| SYLC-53058 | GUST LOCK ACTUATOR | 1 | |
| T-080000659 | AR-15/M16 REC ACT BLOCK SET | 1 | |
| T14521 | CROWFOOT WRENCH - MLG LOCKSTAY ACTR A320NEO | 2 | |
| T720456 | LOCKING TOOL FUEL VALVE ACTUATOR | 12 | |
| T79299501000000H | GEAR ROTARY ACTUATOR LOCK SET | 1 | |
| T792995010500000H | SET OF LOCKING DEVICES FOR BALLSCREW ACTUATOR | 1 | |
| T792995011000000H | BALLSCREW ACTUATOR LOCKING DEVICE FOR RAIL 3 | 1 | |
| TSJ65B01538-1 | TEST FIXTURE - UPLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| TSJ65B01540-1 | TEST FIXTURE - DOWNLOCK ACTUATORS, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| TZS10 | LOCK SET - SPOILER ACTUATOR | 1 | |
| U21828010 | EXTRACTOR NLG DRAG STAY LOCK LINK ATT PINS | 8 | |
| UT1031-1 | BLOCKER CONTROL, DEACTIVATE T/REV, RB211 | 1 | |
| V50 | SWITCH PB CONTACT BLOCK | 1 | |
| VIN 3287605-099 | TRAS LOCK ACTIVATION KIT (L/H) | 1 | |
| WSPL-46 | LOCK COLLAR, MFS ACTUATOR SPOILER | 1 | |
| В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | 1 | |
| С27001-51 | SET - GROUND LOCK, OUTBOARD SPOILER ACTUATORS | 1 | |
| С27047-43 | SET LOCK FLIGHT SPOILER ACTUATOR 737 SFP | 1 | |
| Т79299501000000Н | GEARED ROTARY ACTUATOR LOCK SET | 1 | |
| Т792995010500000H | SET OF LOCKING DEVICES FOR BALLSCREW ACTUATORS | 1 | |
| Т792995011000000Н | BALLSCREW ACTUATOR LOCKING DEVICE FOR RAIL 3 | 1 | |
| 98A52307567001 | LOCK,SAFETY,CARGO DOOR ACTUATORS | 10 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
