| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9092F | AC PT | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98F07108635000 | ADAPTER-AFT,JACKING | 14 | |
| (CALIB) 02-7813C0100 | JACK ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 200909-CA | ADAPTER-MLG JACK same as P/N TMHMA02-00-00 | 1 | |
| (CALIB) 200951A | ADAPTER-NLG JACK | 1 | |
| (CALIB) 21931A1-007 | ADAPTATEUR 220VAC/50HZ BAIE E-TESTER | 1 | |
| (CALIB) 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT (CALIBRATION) | 1 | |
| (CALIB) 98D27309009002 | COLLAR COLLAR DEPTH ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309009004 | COLLAR COLLAR DEPTH ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108562000 | ADAPTER ADAPTER, PRESSURE DRAIN - ACT (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98F07104000002 | JACK ADAPTER, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07101000000 | ADAPTOR ADAPTOR-JACK NOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27003002000 | COLLAR COLLAR, DEPTH ACTU 20 DEGREES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S07003000001 | WING OR AFT FUSLG JACK ADPTR | 1 | |
| (CALIB) 98S07008010001 | FWD FUSELAGE JACK ADAPTER | 1 | |
| (CALIB) 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | |
| (CALIB) 98V07109001000 | ADAPTER - AFT JACKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503011000 | Adaptor Jack - Pylon (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L44508762000 | ADAPTER-CVMS, ACCESS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A38012-86 | PUMP EQPT - VACUUM LAV SYSTEM (RECIRCULATING SYSTEM) (CALIBRATION) | 1 | |
| (CALIB) C27050-32 | Handling EQPT - R/I Stab Jackscrew (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49008-37 | Adapter EQPT - APU Jacking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CHA700224 | ADAPTOR ADAPTOR-BACKLASH CHECKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D14089-101 | VACUUM ADAPTER (CALIBRATION) | 1 | |
| (CALIB) F80014-16 | HOIST ADAPTER STABILIZER JACKSCREW (CALIBRATION) | 1 | |
| (CALIB) FDS40-0247 | ARINC-757 CVR RACK ADAPTOR - NOTE: CVR DOWNLOAD ON AIRCRAFT (CALIBRATION) | 1 | |
| (CALIB) FDS400-215 | ADAPTOR RACK CVR (CALIBRATION) | 1 | |
| (CALIB) J07013-1 | JACKING EQPT MLG AXLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20009-68 | JACKING EQPT - HYDRAULIC TELESCOPING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27005-48 | LOCK eqpt -INBD/OUTBD, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21006-46 | Jack adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21006-53 | Jack Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21010-45 | ADAPTER - JACK, RAM AIR FAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21011-59 | ADAPTER - JACK, ADJUST ANGLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21011-62 | Jack Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) OHME65B80713-1 | HANDLING EQPT - HORIZONTAL STABILIZER ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) PT103 | SPTA 29PCS DRILL BUFFING PAD DETAIL POLISHING PAD MIX SIZE KIT WITH 5/8-11 THREAD BACKING PAD & ADAPTERS FOR CAR SANDING, POLISHING, WAXING (29PCS MINI POLISHING PAD SET2) (CALIBRATION) | 1 | |
| (CALIB) PWA111085 | Adapter, Vacuum Check - Engine Assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT063357 | LONG REACH JACK ADAPTOR PLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T7K220082D166 | GAUGE GAUGE, PYLON ACCEPTANCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHMA02-00-00 | MLG JACK ADAPTER | 1 | |
| (CALIB) TMHNA01-00-00 | NLG JACK ADAPTER | 1 | |
| 0005.10.0000.00 | EUROCOPTER AS350 A-Star Long Nose Jack | 1 | |
| 0014071A0300000 | JACK ADAPTER 2EA | 1 | |
| 001901-001-00 | REMOVAL TOOLS FOR RECTANGULAR RECPTACLE | 8 | |
| 001U071A0300000 | JACK ADAPTER | 3 | |
| 001U264A0200000 | INTERFACE ADAPTER | 1 | |
| 002020002-001 | WING JACK ADAPTORS | 1 | |
| 004-50337-05XX | ACCEPTANCE TEST PROCEDURE SETUP DISK | 1 | |
| 00460-015-000 | ADAPTER - TRIPOD JACK | 1 | |
| 00460-042-000 | NOSE JACK ADAPTOR | 1 | |
| 00460-045-000 | JACK ADAPTER | 1 | |
| 00460-062-000 | JACK ADAPTER | 1 | |
| 00460-125-000 | JACK ADAPTOR | 1 | |
| 00460-145-000 | JACK ADAPTER | 1 | |
| 00460-155-000 | WING JACK ADAPTER | 1 | |
| 00460-157-000 | AUX JACK :TRIPOD JACK FEN121 ADAPTOR | 1 | |
| 00460-329-000 | ADAPTER JACK FOR 757 | 1 | |
| 00460-343-00 | JACK ADAPTER | 1 | |
| 008407 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 00941-115-000 | CABLE ADAPTOR FOR TRIPOD JACKS | 1 | |
| 02-1032-0111 | FWD FUSELAGE JACK (10 TON) (OPTIONAL) | 6 | |
| 02-11075 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) | 1 | |
| 02-11091 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) (Description: Rotabroach Large Diameter Hole Cutter Kit) (Material capacity: 1/2") (Add to cart: Add To Cart) | 1 | |
| 02-125 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 1/8" )( DECIMAL EQUIVALENT: .1250" ) | 1 | |
| 02-125-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 1/8" )( DECIMAL EQUIVALENT: .1250" ) | 1 | |
| 02-13218 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) (Description: Rotabroach Large Diameter Hole Cutter Kit) (Material capacity: 1/2") (Add to cart: Add To Cart) (Description: Blaircutter | 2 | |
| 02-14006 | Blair® Hole Cutter Kits (Description: Heavy-Duty Hole Cutter Kit) (Material capacity: 1/4") (Add to cart: Add To Cart) (Description: Rotabroach Large Diameter Hole Cutter Kit) (Material capacity: 1/2") (Add to cart: Add To Cart) (Description: Blaircutter | 1 | |
| 02-141 | Threaded Shank Micro-Stop Countersink Cage (Maximum capacity: 5/8") (Shaft travel: 3/32") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-1530 | Jumbo Micro-Stop Countersink Cages (Maximum capacity: 1") (Shaft travel: 1/2") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-1533 | Jumbo Micro-Stop Countersink Cages (Maximum capacity: 1") (Shaft travel: 1/2") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Maximum capacity: 1-1/4") (Shaft travel: 1/2") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to | 1 | |
| 02-156 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 5/32" )( DECIMAL EQUIVALENT: .1562" ) | 1 | |
| 02-156-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 5/32" )( DECIMAL EQUIVALENT: .1562" ) | 1 | |
| 02-187 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 3/16" )( DECIMAL EQUIVALENT: .1875" ) | 2 | |
| 02-187-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 3/16" )( DECIMAL EQUIVALENT: .1875" ) | 1 | |
| 02-218 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: COMPLETE TOOL )( HOLE SIZE: 7/32" )( DECIMAL EQUIVALENT: .2188" ) | 1 | |
| 02-218-1 | BURRAWAY DEBURRING TOOLS FRACTIONAL SIZES ( DESCRIPTION: EXTRA BLADE )( HOLE SIZE: 7/32" )( DECIMAL EQUIVALENT: .2188" ) | 1 | |
| 02-2351B-A | Self Aligning Countersink Cages (Throat depth: 1/4"-28 Countersink Thread) (Capacity: 7/8") (Shaft travel: 0.340") (Depth adjustment: 0.001") (Maximum rpm: 5000) (Add to cart: Add To Cart) | 1 | |
| 02-241 | Mini Micro-Stop Countersink Cage (Maximum capacity: 7/16") (Shaft travel: 1/4") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-2621-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2621-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2621-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2621-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2621-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-27009 | Circle Cutters (Description: Circle Cutter (7/8" to 4")) (Add to cart: Add To Cart) (Description: Circle Cutter (1" to 6")) (Add to cart: Add To Cart) (Description: Replacement Cutting Blade) (Add to cart: Add To Cart) | 1 | |
| 02-284 | Extended Footpiece Micro-Stop Countersink Cage (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece extension: 2-3/4") (Add to cart: Add To Cart) | 1 | |
| 02-284-4 | Extended Footpiece Micro-Stop Countersink Cage (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece extension: 2-3/4") (Add to cart: Add To Cart) (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adj | 1 | |
| 02-284-D | Extended Footpiece Micro-Stop Countersink Cage (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece extension: 2-3/4") (Add to cart: Add To Cart) (Maximum capacity: 3/8") (Shaft travel: 5/16") (Depth adj | 1 | |
| 02-285-1 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-10 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-2 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-3 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-4 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-5 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-6 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-7 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-8 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-285-9 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-1 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-10 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-11 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-12 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-13 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-14 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-17 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-2 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-20 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-21 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-22 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-23 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-24 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-3 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-4 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-5 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-6 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-7 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-8 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2855-9 | Back Countersink & Back Spotfacer Step Pilots (Description: Standard Pilot) (Pilot head diameter: 3/32") (Step diameter: -) (Add to cart: Add To Cart) (Description: Standard Pilot) (Pilot head diameter: 3/4") (Step diameter: -) (Add to cart: Add To Cart) | 1 | |
| 02-2921-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-17/64C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2921-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2921-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-9/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-D | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-DC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-F | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-FC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-G | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-GC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-J | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-JC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-2.3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-2.3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.17 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.17C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.96 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.96C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-4.76 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-4.76C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-6.35 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-6.35C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2941-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2941-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2941-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2941-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2941-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2951-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2951-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2951-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2951-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2961-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-17/64C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-9/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-D | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-DC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-F | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-FC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-G | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-GC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-J | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-JC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-2.3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-2.3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.17 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.17C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.96 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.96C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-4.76 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-4.76C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-6.35 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-6.35C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-17/64C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2971-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2971-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2971-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-9/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-D | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-DC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-F | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-FC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-G | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-GC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-J | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-JC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-2.3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-2.3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.17 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.17C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.96 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.96C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-4.76 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-4.76C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-6.35 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-6.35C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-441 | Micro-Stop Countersink Cage (Maximum capacity: 5/8") (Shaft level: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece type: Plastic) (Add to cart: Add To Cart) | 3 | |
| 02-441-1X | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) | 1 | |
| 02-441-2X | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) | 1 | |
| 02-441-3X | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) | 1 | |
| 02-441-4X | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 02-441-5X | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 02-441B | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) | 1 | |
| 02-441C | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) | 1 | |
| 02-441D | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 02-441F | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 02-441FBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) | 1 | |
| 02-441FBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441N | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 02-441S | Micro-Stop Countersink Cage (Maximum capacity: 5/8") (Shaft level: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Footpiece type: Plastic) (Add to cart: Add To Cart) (Maximum capacity: 5/8") (Shaft level: 5/16") (Depth adjustment: 0.001") (Maximum | 1 | |
| 02-441SBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-441SBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") (Depth adjustment: 0.001") (Maximum rpm: 3000) (Add to cart: Add To Cart) (Type: Standard Skirt Model) (Capacity: 5/8") (Shaft travel: 5/16") | 1 | |
| 02-7813-0100 | JACK - NLG AXLE TIRE CHANGING (12 TONS (10 886 KG)) (OPTIONAL EQUIPMENT) | 9 | |
| 02-7813C0100 | BOTTLE JACK ADAPTER | 23 | |
| 02-7818C0110 | JACK, AXLE W/ADPTR MN-NOSE | 8 | |
| 02-7818C0110 | JACK, AXLE W/ADPTR MN-NOSE | 8 | |
| 02-7827-0110 | HYDRAULIC JACK, PTO AP. MAIN TRAIN | 3 | |
| 02-7827C0110 | TAIL JACK (5 TON/4.5 METRIC TON) (CE) OPTIONAL | 7 | |
| 02-7833C0110 | Tronair 02-7833C0110 Blue 12-Ton Hydraulic Axle Jack with MainNose Gear Adapters (CE) | 3 | |
| 02-7854C0110 | JACK AXLE, NLG/MLG COMBINED TIRE CHANGING (DUAL 12/25 TONS (10 886/22 680 KG)) (OPTIONAL) | 11 | |
| 02-8014-4000 | JACKING ADAPTOR | 1 | |
| 025-1158-001 | COVER, BKAD 2&3-C RECEPTACLE DUST | 8 | |
| 02A7844C0111 | JACK, TRIPOD WING (CE) (30 TONS (27 216 KG)) (WAS 02-7844-0111) WITH AIR PUMP, (OPTIONAL) | 6 | |
| 02A7898C0100 | 5 TON JACK JACK ASSY, HELICOPTERJACKING | 4 | |
| 02−7813C0100 | Jack − Nose Gear Axle (12 tons (10886 KG)) (Optional) | 23 | |
| 02−7813−0100 | Jack − Nose Gear Axle (12 Tons (10886 Kg)) (Optional) | 9 | |
| 0330.01.0000.00 | EUROCOPTER AS-350/AS355/AS365 Tail Jack | 1 | |
| 035AL007031B | ADAPTOR RACKFEED ADAPTOR | 1 | |
| 04-109W | Milbar® Safety Wire Twister Kits (Description: Pro Kit) (Add to cart: Add To Cart) (Description: Limited Access Kit) (Add to cart: Add To Cart) | 1 | |
| 04-12 | USATCO Bench Model Shrinker & Stretcher Accessories (Description: Conversion Assembly (stretcher to shrinker)) (Add to cart: Add To Cart) | 1 | |
| 04-135 | USATCO Bench Model Shrinker & Stretcher (Description: Metal Shrinker) (Capacity: 16 ga.) (Add to cart: Add To Cart) | 1 | |
| 04-136 | USATCO Bench Model Shrinker & Stretcher (Description: Metal Shrinker) (Capacity: 16 ga.) (Add to cart: Add To Cart) (Description: Metal Stretcher) (Capacity: 16 ga.) (Add to cart: Add To Cart) | 1 | |
| 04-18 | USATCO Bench Model Shrinker & Stretcher Accessories (Description: Conversion Assembly (stretcher to shrinker)) (Add to cart: Add To Cart) (Description: Conversion Assembly (shrinker to stretcher)) (Add to cart: Add To Cart) | 1 | |
| 04-2K630 | Bench Mount Manual Swaging Machine Kit (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 04-3090-0 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) | 1 | |
| 04-3090-1/2 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) (Throat depth: 3-1/2") (Jaw capacity: 9/16" to 1") (Add to cart: Add To Cart) | 1 | |
| 04-3090-1/4 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) (Throat depth: 3-1/2") (Jaw capacity: 9/16" to 1") (Add to cart: Add To Cart) (Throat depth: 3") (Jaw capacity: 1/4" to 15/32") (Add to cart: Add To Cart) | 1 | |
| 04-396 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-401 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-401-1 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-401-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405-1 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-405-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-410 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-410-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-415 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-415-4 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-420 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-421 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-430 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-435 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-440 | Fast Action Universal Clamps (Description: Round Handle Model) (Jaw capacity: 3/4" (19 mm)) (Add to cart: Add To Cart) (Description: Standard 'T' Handle Model) (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Round Handle Model) (Jaw ca | 1 | |
| 04-529-1 | A-N ELECTRICAL CONNECTOR PLIERS ( DESCRIPTION: REPLACEMENT NO-MAR PADS ) | 1 | |
| 04-529-10 | A-N Electrical Connector Pliers (Description: Replacement No-Mar Pads) (Add to cart: Add To Cart) (Description: A-N Electrical Connector Plier) (Add to cart: Add To Cart) | 1 | |
| 04-E-111P | SHAVIV® AEROBURR DEBURRING SETS ( DESCRIPTION: REPLACEMENT BLADES-THIN POINTED, HEAVY-DUTY 3.2 MM ) | 1 | |
| 0460-015-000 | JACK ADAPTER | 1 | |
| 05-7014-1200-86 | OPTION: 380VAC 3PH 50HZ | 1 | |
| 05-7015-1200-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 05-7015-1200-81 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 05-7022-3411-89 | OPTION; 380VAC; 3PH; 60HZ, | 1 | |
| 05-7023-1100-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 050083-10 | Mitutoyo 050083-10 75mm Depth Base Attachment | 1 | |
| 050084-10 | Mitutoyo 050084-10 100mm Depth Base Attachment | 1 | |
| 050085-10 | Mitutoyo 050085-10 125mm Depth Base Attachment | 1 | |
| 057-0590-80 | DISMOUNTING RECEPTACLE TOOL | 2 | |
| 07-10-03 | HONDA JET JACK PAD ADAPTER KIT | 1 | |
| 07-110-9200 | ADAPTER FOR BATTERIES P/N 3214-31, 4 EA. (THE DIEHL P/N 0001004543 IS EQUIVALENT TO SUBCONTRACTOR P/N 07-110-9200) | 1 | |
| 07-1955 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) | 1 | |
| 07-1957 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) | 1 | |
| 07-1959 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-1960 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-1961 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-2 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-2204 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-2B | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-401-EX | Extension Shank Adapters (Accepts: .401" Shank Sets) (Overall length: 8" (203 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-401B | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-498-EX | Extension Shank Adapters (Accepts: .401" Shank Sets) (Overall length: 8" (203 mm)) (Add to cart: Add To Cart) (Accepts: .401" Shank Sets) (Overall length: 8" (203 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-498A | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) (Shank size: .498" Shank) (Accepts: .498" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Ad | 1 | |
| 07-666 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-68 | Chisel & Cutter Tools (Description: Ripper) (Uses: For clean, short radius cuts.) (Add to cart: Contact us to order) (Description: Cutter) (Uses: Forstraight & radius cuts.) (Add to cart: Add To Cart) (Description: Sheet Metal Trimmer) (Uses: For edging s | 1 | |
| 07-81393 | RIVET MACHINE SET ADAPTR ID1/4" | 1 | |
| 07-99705 | Shank Adapter Sleeve (Accepts: .401" Shank Sets) (Add to cart: Add To Cart) | 1 | |
| 07-JPK-1 | Rivet Punch-Out Tool Holders and Rubber Guards (Capacity: 1/4") (Description: Holder .401 Shank) (Add to cart: Add To Cart) | 1 | |
| 07-JPK-2 | Rivet Punch-Out Tool Holders and Rubber Guards (Capacity: 1/4") (Description: Holder .401 Shank) (Add to cart: Add To Cart) (Capacity: 3/8") (Description: Holder .401 Shank) (Add to cart: Add To Cart) | 1 | |
| 07-PG-1 | Rivet Punch-Out Tool Holders and Rubber Guards (Capacity: 1/4") (Description: Holder .401 Shank) (Add to cart: Add To Cart) (Capacity: 3/8") (Description: Holder .401 Shank) (Add to cart: Add To Cart) (Capacity: 1/4") (Description: Rubber Guard) (Add to c | 1 | |
| 07-PG-2 | Rivet Punch-Out Tool Holders and Rubber Guards (Capacity: 1/4") (Description: Holder .401 Shank) (Add to cart: Add To Cart) (Capacity: 3/8") (Description: Holder .401 Shank) (Add to cart: Add To Cart) (Capacity: 1/4") (Description: Rubber Guard) (Add to c | 1 | |
| 078371-62250 | 3M 078371-62250 Lexa 13353-00000-20 Black Temple Medium Clear +1.5 Diopter Anti-Fog Lense Reader Safety Glasses | 1 | |
| 078371-62251 | 3M 078371-62251 Lexa 13354-00000-20 Black Temple Medium Clear +2.0 Diopter Anti-Fog Lense Reader Safety Glasses | 1 | |
| 0806.11 | ADAPTER JACKING NOSE LANDING GEAR | 1 | |
| 08199-22 | OPTICAL/LASER POCKET TACHOMETER | 1 | |
| 0T900-0525 | ACCEPTANCE TEST FIXTURE | 1 | |
| 0T900-0526 | ACCEPTANCE TEST FIXTURE | 1 | |
| 0T900-0551 | ACCEPTANCE TEST FIXTURE | 1 | |
| 0T900-0552 | ACCEPTANCE TEST FIXTURE | 1 | |
| 0T900-1181 | ACCEPTANCE TEST FIXTURE | 1 | |
| 0U144970 | ACCEPTANCE FIXTURE | 1 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 0U145920 | MANUAL CRANKING STOPTHS ACTUATOR | 24 | |
| 0U191574 | ACCEPTANCE TEST RIG | 1 | |
| 0U301125 | RECEPTACLE | 1 | |
| 0U301213 | RECEPTACLE | 1 | |
| 0UT117 | RECEPTACLE EXTRACTION TOOL | 1 | |
| 1-480416-0 | HOUSING - RECEPTACLE | 1 | |
| 10-00140-0100-000 | ADAPTER NLG JACK | 1 | |
| 10-100-1300 | TACHOMETER OPTIAL LASERTACH II 299 (NEW) | 3 | |
| 10-100-1773 | TACHOMETER, OPTICAL, PHOTOTACH | 1 | |
| 10-234501-000 | JACK ADAPTER PAD | 1 | |
| 10-501A | Power Hand Rivet Squeezer (Description: Tool Only) (Reach: 2-1/2") (Gap: 1-1/8") (Add to cart: Contact us to order) | 1 | |
| 10-502AH-D | 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1-1/2") (Gap: 1-1/4") (Add to cart: Add To Cart) | 1 | |
| 10-502AH-E | 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1-1/2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 3") (Gap: 1-1/4") (Add to cart: Add To Cart) | 1 | |
| 10-70500-10 | RECEPTACLE DUST CAP (ESD PROTECTION) | 1 | |
| 10-70524-10 | RECEPTACLE DUST CAP (ESD PROTECTION) | 1 | |
| 10-DA-2 | DA Series 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 2-1/2") (Gap: 1-5/8") (Add to cart: Add To Cart) | 1 | |
| 10-DA-5 | DA Series 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 2-1/2") (Gap: 1-5/8") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 6") (Gap: 1-5/8") (Add to cart: Add To Cart) | 1 | |
| 10-THS10 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) | 1 | |
| 10-THS20 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) | 1 | |
| 10-THS22 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 10-THS30 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 10-THS40 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 10-THS50 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 10-THS60 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 100/89 | A380 BLG ACTUATOR ADAPTOR KIT | 1 | |
| 100/94 | A380 NLG ACTUATOR ADAPTOR KIT | 1 | |
| 101-00436A | Fuel Quantity Adapter Module for BAC-111 400 | 1 | |
| 101-00436B | Fuel Quantity Adapter Module for BAC-111 400 | 1 | |
| 101-00472 | FUEL QUANTITY ADAPTER CABLE BARFIELD 8000 AC | 2 | |
| 101-01421 | Fuel Quantity Adapter Module for Sikkorsky Blackhawk S-70, UH-60 | 3 | |
| 101-54 | PROGRAMMING INTERFACE ADAPTOR | 1 | |
| 1013-210 | CART - LAVATORY SERVICE - 200 GALLON WASTE - 100 GALLON FLUSH/ DETERGENT - PUMP CAPACITY 10 GPM AT 20 PSI (TRAILER MOUNTED) (OPTIONAL TO ITEM RE-0005C) (MFG. BY ACE/NORDCO) | 1 | |
| 1013.5 | REAR FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 2 | |
| 1014 | EUROCOPTER AS350 A-Star Short Skid Tail Jack | 1 | |
| 1014.5 | NOSE FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 3 | |
| 105-31762W4 | RECEPTACLE | 1 | |
| 109-3101-63-1 | ADAPTER BEARING OUTER RACE REMOVAL | 1 | |
| 109-3900-03-107 | JACKS AND ADAPTERS, HELICOPTER JACKING | 1 | |
| 109-3900-80-113 | OIL/NITROGEN ADAPTORS- SHOCK STRUTS,ACCUMULATORS,MR DAMPERS | 1 | |
| 109-3900-89-101 | JACKS AND ADAPTERS KIT | 1 | |
| 109-3900-89-104 | AIRCRAFT HYDRAULIC JACK & HYDRAULIC JACK ADAPTORS | 1 | |
| 10A22000-001 | FWD JACK ADAPTER SET | 1 | |
| 10C1094G01 | PULLER, IMPACT - HPT SHROUD REMOVAL | 1 | |
| 10C1245G01 | HEATER, HPT ROTOR SHAFT (USED WITH 9470M56G01) (110 VAC, 60HZ) (HEATER) | 1 | |
| 10ME65-72701 | Jack Adapter | 1 | |
| 10ME65-72702 | ADAPTER JACK FUSELAG | 1 | |
| 10PRE65B00161-1 | PROTECTIVE EQPT-BOLT ACTUATOR | 10 | |
| 11-105 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/8) | 2 | |
| 11-107 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (5/32) | 2 | |
| 11-109 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (3/16) | 3 | |
| 11-111 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (7/32) | 1 | |
| 11-113 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/4) | 1 | |
| 11-20190 | ACR ARTEX FPT 8808 ELT PROGRAMMER PN: 11-20190 | 1 | |
| 11-205 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/8) | 1 | |
| 11-207 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (5/32) | 2 | |
| 11-209 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (3/16) | 1 | |
| 11-211 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (7/32) | 1 | |
| 11-213 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/4) | 1 | |
| 11-305 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/8) | 1 | |
| 11-307 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (5/32) | 2 | |
| 11-309 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (3/16) | 1 | |
| 11-313 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/4) | 2 | |
| 110602005-01 | PDL INTERFACE CABLE -603 ADAPTER CABLE | 2 | |
| 110602026-56 | PDL/Ethernet Adapter Cable (RJ45/115VAC) | 1 | |
| 1145-5 | MICROTRACKER™ OPTICAL TRACKER | 1 | |
| 114A | ADAPTOR TORQUE REACTOR | 1 | |
| 114M2569 | XA-CLEANKIT REPLACEMENT PACK: LENS CLEANING KIT FOR VIDEOPROBE TIP OPTICS INCLUDES: 5 PACKAGES OF ALCOHOL WIPES AND 1 PACKAGE OF COTTON SWABS | 1 | |
| 1159GSE40214-1 | JACK PAD ADAPTER | 1 | |
| 1159GSE40214-7 | AXLE JACK ADAPTER | 2 | |
| 1159GSE50214 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159GSE50214-1 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159GSE50214-3 | AXLE JACK ADAPTER | 4 | |
| 1159GSE50233-1 | LANDING GEAR STRUT BLEED JACK (OPTIONAL) | 1 | |
| 1159GSE50293-1 | BUSHING ASSY-JACKING ADAPTER MLG | 2 | |
| 1159SEM20001-1 | Jack Adaptor Pad Assy | 1 | |
| 1159SEM30001-11 | AXLE JACK ADAPTER | 1 | |
| 1159SEM30001-17 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159SEM30001-3 | JACK PAD ADAPTER | 1 | |
| 1159SEM30001-5 | JACK PAD ADAPTER | 1 | |
| 1159SEP40001-1 | WING ACCESS COVER ADAPTER (INBOARD) | 1 | |
| 1159SEP40002-1 | WING ACCESS COVER ADAPTER (OUTBOARD) | 1 | |
| 117-12020W16 | DESCRIPTION : EXTRACTOR TOOL | 1 | |
| 11800-3 | FasTrakT Day and Night Optical Blade Tracker | 1 | |
| 11958 | 11958;ACKIV6Case Transit Case for KIV6 Adptr | 1 | |
| 11C11218-3 | ADAPTER, VACUUM | 1 | |
| 11C23-10524 | GO/NO GO GROUND POWER PLUG/RECEPTACLE | 1 | |
| 11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | 1 | |
| 11C3144G01 | Adapter Torque-Spanner Nut Inner Race No 4 Bearing | 1 | |
| 11C3165 | FIXTURE - STRONGBACK - LIFT - TURN AND RESTRAIN - LPT MODULE | 1 | |
| 11C3165G01 | Fixture,strongback lift,turn&restrain-lpt module | 1 | |
| 11C3485G01 | Fixture Machining-Seal Forward-Hpt Rotor | 1 | |
| 11C3576 | BOLT/SPACER - DUMMY-LPT STATIC BALANCE | 1 | |
| 11C3576G01 | Bolt/spacer,dummy-lpt static balance | 1 | |
| 11C4429G01 | ADAPTOR-LOCKING ACCESSORY GEARBOX (ALT SPL-10042) | 1 | |
| 11C4614 | ADAPTER - SHIPPING STAND TO JACKING LEGS | 1 | |
| 11C4614P01 | SHIPPING STAND TO JACKING LEGS ADAPTER | 1 | |
| 11C4811 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | 1 | |
| 11C4811G01 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | 1 | |
| 12-0114 | SOFTWARE-TEST,ACCEPTANCE | 1 | |
| 12-8006-16 | Bowers 12-8006-16 Kroeplin Bluetooth Interface Adapter for 12-G005 + 12-G010 | 1 | |
| 120-33701-005 | Tripod Jack Adapter Nose | 3 | |
| 120-431-001 | ADAPTOR, 220VAC | 1 | |
| 12001 | IRWIN® TAP WRENCH ( DESCRIPTION: #0 TO 1/4" (6.35 MM) TAP CAPACITY ) | 5 | |
| 120155-0012 | Crimp Hand Tool that has been Developed for Optimal Crimping of Machined Contacts with Diameters from 0.08 to 2.5 mm² (28 through 14 AWG). | 1 | |
| 120155-0017 | Crimp Hand Tool that has been Developed for Optimal Crimping of Machined Contacts with Diameters from 0.14 to 6.0 mm² (26 through 10 AWG). | 1 | |
| 120−431−001 | 220V ac Adapter − Data Bus Tester (Optional) | 1 | |
| 12145-021-001 | FWD ENGINE BEAM JACK ADAPTER TOOL | 1 | |
| 1216-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) | 1 | |
| 1216-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1216-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1216-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 4 | |
| 1232-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1232-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1232-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1232-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 124044/B | 1 4MM ADAPTER BLACK | 1 | |
| 1270 | EUROCOPTER AS355 Twin Star Nose Jack | 3 | |
| 1271.00 (x2) | EUROCOPTER BO-105, BK-117 Nose Jack | 1 | |
| 128-810000/928 | JACK ADAPTER | 1 | |
| 12AA221 | 8MM ADAPTER FOR MAGNETIC STAND (FOR MITUTOYO SURFTEST SJ-210 SURFACE ROUGHNESS TESTER CODE: 178-560-01D S/N: 614031811) | 1 | |
| 12AAC072 | Mitutoyo 12AAC072 Depth Probe | 1 | |
| 12S1273-03 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12S1274-03 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12S1282-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12S1283-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 2 | |
| 12S1289-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 13-3022 | Bowers 13-3022 Standard Tracer SH Smallest Bore Dia 8mm Max. Measuring Depth 27mm Included in the Delivery | 1 | |
| 13-3025 | Bowers 13-3025 Slot Tracer NH Max Depth of Slot 15mm and 20mm Min Width of Slot 3mm | 1 | |
| 13-3056 | Bowers 13-3056 Bore tracer BH Smallest bore Dia 2.5mm Max. Measuring Depth 20mm | 1 | |
| 13-3068 | Bowers 13-3068 Slot Tracer 25mm Depth NFH-25 | 1 | |
| 13-632-5 | SPI® Machinist Sets (Description: 3 PC Set) (Sizes: 2, 3 & 4") (Add to cart: Add To Cart) | 1 | |
| 13-633-3 | SPI® Machinist Sets (Description: 3 PC Set) (Sizes: 2, 3 & 4") (Add to cart: Add To Cart) (Description: 3 PC Set) (Sizes: 2, 4 & 6") (Add to cart: Add To Cart) | 1 | |
| 13-634-1 | SPI® Machinist Sets (Description: 3 PC Set) (Sizes: 2, 3 & 4") (Add to cart: Add To Cart) (Description: 3 PC Set) (Sizes: 2, 4 & 6") (Add to cart: Add To Cart) (Description: 4 PC Set) (Sizes: 2, 3, 4 & 6") (Add to cart: Add To Cart) | 1 | |
| 13-635-8 | SPI® Machinist Sets (Description: 3 PC Set) (Sizes: 2, 3 & 4") (Add to cart: Add To Cart) (Description: 3 PC Set) (Sizes: 2, 4 & 6") (Add to cart: Add To Cart) (Description: 4 PC Set) (Sizes: 2, 3, 4 & 6") (Add to cart: Add To Cart) (Description: 4 PC Set | 1 | |
| 130175-2P098 | RECEPTACLE | 1 | |
| 132-120022-3 | WING JACK ADAPTER PAD | 2 | |
| 19 | Protractor & Depth Gauge (Range: +- 180 degrees) (Add to cart: Add To Cart) | 1 | |
| 23 | Tesa 00530441 Depth Gauge, TWIN-CAL IP67 â€â€œ Models with short cut measuring face â€â€œ 0-200mm / 0-8" | 1 | |
| 206 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. | 3 | |
| 208 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. | 2 | |
| 239 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 240 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 1350 | DIGITAL DISPLAY DEPTH GAUGE. FACOM | 4 | |
| 1410 | Sioux® Mini Air Drills (Description: 1/4" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Non-Reversible) (Add to cart: Contact us to order) | 1 | |
| 1421 | EUROCOPTER HH-65A Dauphin Tail Jack | 1 | |
| 1662.00 | EUROCOPTER S-62 Nose Jack | 1 | |
| 1823 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 18TPI | 1 | |
| 1824 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 24TPI | 1 | |
| 1825 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 32TPI | 1 | |
| 2150 | CARRYING CASE, HELICOPTER KIT (WHEELS AND RETRACTABLE HANDLE) | 1 | |
| 4072 | BOEING REFERENCE STANDARD 747 PT 6 53-30-05. Material 2024-T3 Aluminum. Fasteners BACR15CE5D5, BACR15CE6D5. Includes Test Report and Certificate of Conformance. | 1 | |
| 13029 | OFFSET DRILL ATTACHMENT PANCAKE ADAPTER SHORT | 1 | |
| 13257 | ADAPTER,SWITCH ACTUATOR | 3 | |
| 13529 | OFFSET DRILL ATTACHMENT (PANCAKE ADAPTER) | 1 | |
| 0032205 | XLG3T61120FG TIP ADAPTER BLACK | 1 | |
| 0032215 | XLG3TM616060FG STEREO ADAPTER BLACK | 1 | |
| 072506 | Battery Pack for PTT & LTT | 1 | |
| 113339 | 113339;8800OPT10 Tracking Generator | 1 | |
| 114348 | 114348;8800 Precision DTF / VSWR Accessory Kit; Requires Opt10 | 1 | |
| 120139 | ADAPTER FOR TRIPOD TALE JACK | 1 | |
| 1330A | ADAPTER NLG JACK | 1 | |
| 134-03428-402 | TRIPOD JACK ADAPTER MAIN - RIGHT | 1 | |
| 135-03428-401 | Tripod Jack Adapter Main | 3 | |
| 135-03428-402 | TRIPOD JACK ADAPTER MAIN | 1 | |
| 137W00-100-00 | FRONT ATTACHEMENT ADAPTER | 1 | |
| 138453 | 138453;RGSNGOPT04 ACSS Compatibility Opt | 1 | |
| 13B14001 | ADAPTER, VACUUM | 1 | |
| 13MIT65B00717 | ADAPTER - EMERGENCY JACKING, AIRPLANE RECOVERY | 1 | |
| 13MIT65B00717-M | ADAPTER -0 EMERGENCY JACKING | 1 | |
| 14-0930 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) | 1 | |
| 14-1398 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1400 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1740 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1741 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1742 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1743 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1744 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1745 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1746 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1875 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 7 | |
| 14-1890 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1891 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1892 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1895 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2690 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2697 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2700 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 3 | |
| 14-2701 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2710 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2711 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-GCM6913 | AC Adapter for U-2 Interface, Scout II, RS232C converter (24VDC 1A) | 1 | |
| 1410-520 | Sioux® Mini Air Drills (Description: 1/4" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Non-Reversible) (Add to cart: Contact us to order) (Description: 3/8" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Keyless Non-Reversible) ( | 1 | |
| 1410R | Sioux® Mini Air Drills (Description: 1/4" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Non-Reversible) (Add to cart: Contact us to order) (Description: 3/8" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Keyless Non-Reversible) ( | 1 | |
| 1412R | Sioux® Mini Air Drills (Description: 1/4" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Non-Reversible) (Add to cart: Contact us to order) (Description: 3/8" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Keyless Non-Reversible) ( | 6 | |
| 141593 | 141593;35XXOPT56 Tactical Radio Group D Test | 1 | |
| 144317 | Vacuum Adapter Stainless Steel (18mm) | 1 | |
| 144318 | Vacuum Adapter (for CL-2000 & SS2000) | 1 | |
| 144319 | Vacuum Adapter (18mm) | 1 | |
| 144322 | Vacuum Adapter (31mm) | 1 | |
| 144338 | Vacuum Adapter (for BL-5000) | 1 | |
| 144345 | Vacuum Adapter (for BL-3000) | 1 | |
| 144346 | Vacuum Adapter (for BL-7000) | 1 | |
| 144356 | Vacuum Adapter for VZ-Series | 1 | |
| 144465 | TORQUE ADAPTOR - MLG RETRACT ACTR A320NEO | 1 | |
| 145-2SF | AMPHENOL ADAPTER FOR EDDY CURRENT MACHINE | 1 | |
| 1450A-1 | MULTIPLEXER, 4 VIB / 4 TACH, OPTICAL TRACKER, MULTI INPUT CONNECTOR | 1 | |
| 145612 | Vacuum Adapter (for BF060, BF080, BF120, EF080, EF120 & EF180 with 4mm HIOS Drive) | 1 | |
| 145618 | Vacuum Adapter (for BF060, BF080, BF120, EF080, EF120 & EF180 with ¼ F/Hex Drive) | 1 | |
| 145653 | Vacuum Adapter (for BF035, BF045, EF035, EF040 & EF055 models) | 1 | |
| 145959 | Vacuum Adapter (for for BFA060, BFA080, BFA120 with 1/4 F/Hex Dr.) | 1 | |
| 145960 | Vacuum Adapter (for BFA060, BFA080, BFA120 with 4mm Hios Dr.) | 1 | |
| 145971 | Vacuum Adapter (for NFA-Series) | 1 | |
| 145972 | Vacuum Adapter (for NF150 & 220) | 1 | |
| 145973 | Vacuum Adapter (for NF450) | 1 | |
| 1473M25G03 | . MANIFOLD-HPT ACTIVE | 1 | |
| 15-1580 | USATCO Supersonic Junior Air Vac (Description: Junior Air Vac) (Add to cart: Add To Cart) | 1 | |
| 15-1780 | Mini Air Vac (Description: Mini Air Vac with 18" Flex Hose) (Add to cart: Add To Cart) | 1 | |
| 15-1980 | Mini Air Vac (Description: Mini Air Vac with 18" Flex Hose) (Add to cart: Add To Cart) (Description: Mini Air Vac with 12" Rigid Hose) (Add to cart: Add To Cart) | 1 | |
| 15-2026 | Spring, Rack & Pinion for MPT-250B | 2 | |
| 15-7602-1000-86 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 15-7603-1000-82 | OPTION: 460VAC 60HZ, | 1 | |
| 15-7603-1000-85 | CART, CABIN PRESSURIZATION (220VAC/50HZ) (SEE TABLE BELOW UNDER NOTES) PRICED AFTER SELECTION. (OPTION) | 1 | |
| 15-7603-1000-86 | OPTION: 380VAC 50HZ, | 1 | |
| 15-7603-1000-89 | OPTION: 380VAC 60HZ, | 1 | |
| 15-94300 | Dynabrade® Dynaswivel Air Line Connectors (Type: No-Mar Composite) (Thread size: 1/4" NPT) (Recommended air flow: 0 to 33 CFM) (Add to cart: Contact us to order) | 1 | |
| 15-95462 | Dynabrade® Dynaswivel Air Line Connectors (Type: No-Mar Composite) (Thread size: 1/4" NPT) (Recommended air flow: 0 to 33 CFM) (Add to cart: Contact us to order) (Type: The Original) (Thread size: 1/2" NPT) (Recommended air flow: 46 to 65 CFM) (Add to car | 1 | |
| 15-AVA-11 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) | 1 | |
| 15-AVA-12 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) | 1 | |
| 15-AVA-13 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) (Description: 5" Wide Nozzle) (Add to cart: Add To Cart) | 1 | |
| 15-AVA-14 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) (Description: 5" Wide Nozzle) (Add to cart: Add To Cart) (Description: 18" Rigid Extension Wand) (Add to car | 1 | |
| 15-AVA-15 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) (Description: 5" Wide Nozzle) (Add to cart: Add To Cart) (Description: 18" Rigid Extension Wand) (Add to car | 1 | |
| 150210 | JACK ADAPTER NOSE | 1 | |
| 150266 | JACK ADAPTER NOSE | 1 | |
| 151580 | USATCO SUPERSONIC JUNIOR AIR VAC ( DESCRIPTION: JUNIOR AIR VAC ) | 1 | |
| 1565-9910 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| 159GSE50214-3 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 15D7603-1000 | OPTION: 460VAC 60HZ, | 5 | |
| 15H7603-1000 | OPTION: 380VAC 3PH 50HZ, | 8 | |
| 1610-6-8 | 1"X 1/2" REDUCER BUSHING SS NPT (MANUFACTURER : SWAGELOK LYON VANNES ET RACCORDS) | 1 | |
| 1616-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1616-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1616-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1616-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1632-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1632-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1632-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1632-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 1691A0000-01 | MAIN LANDING GEAR JACKING ADAPTOR | 1 | |
| 16A13200L1-1 | HW LG MLG JACKING ADAPTER ASSY | 1 | |
| 16A24003-1 | ADAPTER KIT JACKING | 1 | |
| 16A46185L1-1 | PRESSURE ADAPTER ASSEMBLY, NITROGEN SERVICING UNIT TO AERIAL REFUEL RECEPTACLE | 1 | |
| 17-1249 | 767 TAIL JACK ADAPTER 2.5" DIA X 12" LONG | 1 | |
| 17-TES0078 | L3AP RACK ADAPTOR CABLE | 9 | |
| 17-TES0079 | L3AP RACK ADAPTOR CABLE | 1 | |
| 17283-17146 | Ultralite® Alligator Yoke Riveters (Description: Ultralite® Alligator Yoke Riveter) (Add to cart: Add To Cart) (Description: 3/16" Set Hole 5" Reach 7/8" Travel 6,800lbs Forc) (Add to cart: Add To Cart) | 1 | |
| 1730-14-400-1946 | JACK ADAPTER PAD | 1 | |
| 173778 | ADAPTER-OXYGEN CHARGING (DO NOT ORDER, REPLACED BY GSB1210012) | 6 | |
| 17G110657-1 | ADAPTER KIT, HYD SYS - FUSELAGE JACKING | 1 | |
| 17TES0046 | RECORDER INTERFACE (RI) ADAPTER CARD | 1 | |
| 17TES0048 | RECORD INTERFACEADAPTER | 5 | |
| 17TES0078 | ADAPTOR L3AP RACK ADAPTOR CABLE | 9 | |
| 17TES0079 | CABLE L3AP RACK ADAPTOR CABLE | 1 | |
| 182-015 | TOOL, EXTRACTION-FIBER OPTIC TERMINI | 2 | |
| 182-016 | TOOL, ALIGNMENT SLEEVE INSERTION/EXTRACTION-FIBER OPTIC TERMINI | 1 | |
| 18253G10 | ADAPTOR, PUSHBACK | 4 | |
| 1826M31P001A | . BRACKET-TUBE AIR, LPT | 1 | |
| 1862-C | BAROMETRIC PRESSURE SWITCH TEST BOX & ADAPTER HARNESS (HEWLETT-PACKARD MODEL 1862-C MEGGER MODEL BM403) | 1 | |
| 186ABCDEF | BOEING CUSTOM COMBINATION REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875", .2500", .3125", .3750", .4375", .500. Each hole size marked with the corresponding Boeing Part number 186A-186F Includes Test Report and Certific... | 1 | |
| 18821-3 | PITOT TEST ADAPTOR, NAV-AIDS PITOT STATIC TEST EQUIPMENT AND RVSM AIR DATA ACCESSORIES KITS | 4 | |
| 18C8105 | STRONGBACK, LPTM H/F | 1 | |
| 18D9602-1 | VACUUM CHECK ADAPTER SET | 1 | |
| 190012 | TNC JACK TO JACK BULKHEAD ADAPTER, 50 OHM, HERMETICALLY SEALED | 1 | |
| 1901556-1 | LG STR ACT DIE ADAPT SDE BENCH | 1 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 196T06640-401 | ADAPTER, JACKING | 1 | |
| 199-177101-04.00 | INTERFACE CABLE SOFTWARE LAPTOP | 1 | |
| 199-17730 | INTERFACE CABLE SOFTWARE LAPTOP | 4 | |
| 19C0903G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR VARIBLE BYPASS VALVE (VBV) REPLACEMENT AND CHECK | 1 | |
| 1A090-05450AI | CAPTAIN BACK COVER | 1 | |
| 1A201-0215CP | COVER-BACK, CAPT SEAT | 1 | |
| 1AE1M14122 | GAGE,LPT ACC PIPING | 1 | |
| 1AM1141/51K | Sioux® Sealant Removal Angle Die Grinder (Description: Complete 14 PC Kit) (Add to cart: Contact us to order) | 3 | |
| 1C6139G05 | TL SET-HPT SHANK NUT RPL (SHANK NUT REPLACEMENT TOOL SET.) | 1 | |
| 1C6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C6001G01 | 1 | |
| 1C6807G01 | ADAPTER BRACKETS, AFT SHAFT - PT ROTOR | 1 | |
| 1C6950P37 | HPT TORQUE FIXTURE SPACER BRAND (GE) | 1 | |
| 1C8037G01 | Cradle, Maint Dolly Support/Package Support-Upt | 1 | |
| 1C8094 | ADAPTER KIT, ELECTRONIC PROTRACTOR, LM2500 BASE | 1 | |
| 1C8096 | ADAPTER KIT - ELECTRONIC PROTRACTOR LM2500+ AND +(G4) | 1 | |
| 1C8444 | ADAPTER SET - ELECTRONIC PROTRACTOR-V STTR VANE RIGGING | 1 | |
| 1C9317G01 | ADAPTER SUPPORT/LIFT - LPC SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | 1 | |
| 1C9428 | ADAPTOR, TORQUE BRKG-COMPR STTR VANE ACT ARM RTING | 1 | |
| 1C9428G01 | Adaptor,torque brkg-compr sttr vane act arm ring nut | 1 | |
| 1C9458 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | 1 | |
| 1C9458G01 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | 1 | |
| 1C9613G01 | FIXTURE, LIFT AND TURN LPT HORIZONTAL (STRONGBACK) | 1 | |
| 1C9613G02 | STRONGBACK, LIFT, TURN AND RESTRAIN - LPT MODULE | 1 | |
| 1C9774G01 | TORQUE ADAPTER SET, RETAINER NUT - NO. 5R BEARING INNER RACE NUT | 1 | |
| 1R18267 | Adapter, Extractor | 1 | |
| 1R18270 | Adapter, Extractor | 1 | |
| 1R18291 | EXTRACTOR, ADAPTER | 1 | |
| 1R18687 | Adapter, Vane Actuating | 1 | |
| 2-020V747-75 | PREFORMED PACKING (USE WITH ADAPTER 803213-S58-2) | 1 | |
| 2-264S604-70 | PREFORMED PACKING (USE WITH ADAPTER 803440-S58-10) | 1 | |
| 20-127-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-127-45-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-129-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-133-20 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-350 | Socket Drive Angle Drill Attachments (Description: 90° Angle Head, 1/4 Square Drive) (Diameter: 3/4" (19 mm)) (Head size: 1.60" (41 mm)) (Overall length: 7" (178 mm)) (Side to center: 1-3/8" (35 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-720 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-725 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-730 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-735 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-745 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-755 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-820 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-825 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-830 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 3 | |
| 20-835 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-845 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-855 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 200 909-CA | MLG JACK ADAPTER | 6 | |
| 2006510-105 | ADAPTER,AIRCRAFT JACKING POINT | 1 | |
| 200909-CA | MLG Jack Adapter | 6 | |
| 200909/CA | MLG JACK ADAPTER | 6 | |
| 200909CA | ADAPTER-MLG JACK | 6 | |
| 200932-CA | NLG JACK ADAPTER | 3 | |
| 200932CA | NLG JACK ADAPTER | 3 | |
| 200951-A | NLG Jack Adapter | 6 | |
| 200951A | ADAPTER-NLG JACK | 6 | |
| 200951A-REVC | ADAPTER-NLG JACK (EQ. TO TMHNA01-00-00 AND D22827000 | 1 | |
| 2022-1 | AERIAL REFUEL RECEPTACLE TEST KIT | 1 | |
| 2022-172 | TESTER - AERIAL REFUEL RECEPTACLE | 1 | |
| 2022-51 | FUEL TESTER (RECEPTACLE) | 3 | |
| 2022-72 | TESTER - AERIAL REFUEL RECEPTACLE | 1 | |
| 2022480-TA | TOOL PROTACTOR ADAPTER (2 IT) | 1 | |
| 2025598-1 | CABLE, LAPTOP/ECU MAINT INTERFACE | 5 | |
| 20327 | Conn;Adapter;50 Ohm; N Plug to BNC Jack; Straight; | 1 | |
| 204-900006-1 | R/H JACK ADAPTER | 1 | |
| 205-536 | TACHOMETER OPTICAL TOOL | 1 | |
| 205211-1 | RECEPTACLE | 5 | |
| 20549SI-202 | CHANGER 100/240VAC AND ADAPTERS | 1 | |
| 212-07-10-0010-1 | JACK ADAPTERS KIT | 1 | |
| 21340 | Economy Pneumatic Nibbler (Capacity (steel): -) (Overall length: -) (Description: Replacement Punch) (Add to cart: Add To Cart) | 1 | |
| 21341 | Economy Pneumatic Nibbler (Capacity (steel): -) (Overall length: -) (Description: Replacement Punch) (Add to cart: Add To Cart) (Capacity (steel): -) (Overall length: -) (Description: Replacement Die) (Add to cart: Add To Cart) | 1 | |
| 2141-201A | DIGITAL DEPTH GAGE - RANGE: 0-12"/300MM ACCURACY: /- 0.0008/.02MM | 1 | |
| 21C7020G03 | PTO DRIVE ASSEMBLY SHIM AND BACKLASH CHECK KIT | 1 | |
| 21C7253G01 | ADAPTER, REACTION | 1 | |
| 21WM79 | WESTWARD IMPACT SOCKET ADAPTER: 1 IN INPUT DRIVE SIZE, BLACK OXIDE, 3/4 IN OUTPUT DRIVE SIZE, SQUARE | 1 | |
| 21Y37A | TAIL JACKING PAD ADAPTOR | 6 | |
| 226819 | MANUAL SEALANT GUNS ( DESCRIPTION: REPLACEMENT RETAINER - 2.5 OZ ) | 3 | |
| 226820 | MANUAL SEALANT GUNS ( DESCRIPTION: REPLACEMENT RETAINER - 6 OZ ) | 3 | |
| 2277/90.01 | 2277/90.01;SNT-121A Worldwide Compatible AC Adapter | 1 | |
| 23-90-00-0060 | ACARS ADAPTER CABLE | 1 | |
| 2302/90.01 | 2302/90.01;Universal AC Power Adapter | 1 | |
| 23071574-106 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-107 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-109 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-111 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-113 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-125 | BLADE TRACK, 1ST STAGE HPT | 1 | |
| 2310-T004-401 | DEDEVICE, PHENOM AXLE JACK ADAPTER | 1 | |
| 2310-T030-401 | NLG WHEEL REPLACEMENT ADAPTER | 2 | |
| 2317-T020-401 | PHENOM 300 NOSE GEAR JACK ADAPTER | 2 | |
| 232701 | Roller Nozzles (Description: Roller Nozzle Assembly) (Size/diameter: 2" (51 mm)) (Add to cart: Add To Cart) (Description: Roller Nozzle Assembly) (Size/diameter: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Replacement Roller) (Size/diameter: 1" ( | 1 | |
| 232702 | Roller Nozzles (Description: Roller Nozzle Assembly) (Size/diameter: 2" (51 mm)) (Add to cart: Add To Cart) (Description: Roller Nozzle Assembly) (Size/diameter: 1" (25 mm)) (Add to cart: Add To Cart) (Description: Replacement Roller) (Size/diameter: 1" ( | 1 | |
| 232A1308-47 | RECEPTACLE | 1 | |
| 234200-700-100 | Acceptance Test Fixture | 1 | |
| 234300-71 0-700 | ACCEPTANCE TEST FIXTURE | 1 | |
| 2350-18F-Z3CT | RECEPTACLE FOR ANGLE ASSY | 1 | |
| 2383R03-00-1DL | RECEPTACLE | 1 | |
| 2403.26.1000 (x2) | EUROCOPTER AS-350/AS355/AS365 Nose Jack | 1 | |
| 2403.26.1000.00 | EUROCOPTER EC-135 Nose Jack | 1 | |
| 2403.26.2000.00 (x2) | EUROCOPTER EC-135 Tail Jack | 1 | |
| 2403.37.1000 | EUROCOPTER AS332 Super Puma/as-532 Cougar Nose Jack | 1 | |
| 2403.37.1000.00 (x2) | EUROCOPTER AS332 Super Puma/as-532 Cougar Tail Jack | 1 | |
| 2403.37.1000.00B(x2) | EUROCOPTER NH-90 Nose Jack | 1 | |
| 2424-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2424-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2424-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2424-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2432-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2432-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2432-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2432-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 2434A0000-01W01 | DEVICE FOR SERVICING THE ACTUATOR OF THE INTERCEPTOR DRIVE | 1 | |
| 244-16B-R | RECEPTACLE | 1 | |
| 244-16C | CAMLOC RECPTACLE | 1 | |
| 244-601222-000 | AC ADAPTOR | 2 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 25204-21B21 | PART NUMBER PART DESCRIPTION NEW QTY TO ORDER 25204-21B21 VACUUM GAUGE, 0-30HG 2 | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 2 | |
| 2546C-02 | PORTABLE VACUUM PUMP (OPTIONAL 2545C-02) | 5 | |
| 256035-PT | 256035-PT PRESSURE TRANSDUCER (OPTIONAL) PRESSURE TRANSDUCER. RANGE 0-750/1000 PSIG. INCLUDES: ADAPTER AND BRACKET . T-FITTING . HARNESS | 1 | |
| 259084-8 | Vacuum Chamber Adapter | 1 | |
| 26-2-1006-1 | JACK ADAPTERS (TECNAM) | 1 | |
| 261742255-0102 | ADAPTER + COMPACT FLASH CARD 1GB | 3 | |
| 26376 | Machine Screw Tap & Hex Die (Description: Complete 76 PC Kit) (Add to cart: Add To Cart) | 4 | |
| 26377 | Machine Screw Tap & Hex Die (Description: Complete 76 PC Kit) (Add to cart: Add To Cart) (Description: Complete 117 PC Kit) (Add to cart: Add To Cart) | 3 | |
| 27-18-90424 | ACOUSTIC ADAPTER FOR 89-01 SERIES | 1 | |
| 27-98711 | End Plate & Control Upgrade (Description: Type D Models) (Add to cart: Add To Cart) (Description: Type EA Models) (Add to cart: Contact us to order) | 1 | |
| 2703133-1 | ADAPTER JACK PAD | 1 | |
| 2709M94G01 | HPT ACC FWD MOUNT BRACKET | 1 | |
| 2709M96G0 | MNFLD HPT ACC AIR | 1 | |
| 2742M65P01 | HPT ACC FWD MOUNT BRACKET | 1 | |
| 28-0-1067H | JACK ADAPTER | 4 | |
| 28.0-1066D | WING JACK ADAPTER | 4 | |
| 28.0-1459 | Jack Adapter | 1 | |
| 28.0-4419 | FLGHT WRN CMPTR INTERFACE | 1 | |
| 2916701-1 | JACKING ADAPTER WING AND AFT FUSELAGE JACK POINT | 1 | |
| 29203300D | OPTICAL TRACKER BRACKET | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 29650-1 | ADAPTER, TEST STAND, ACCESSORIE | 1 | |
| 296710-1 | ADAPTER KIT PNEUMATIC ACTUATOR | 1 | |
| 298074-1 | ADAPTER, VACUUM CHECK | 1 | |
| 29A047 | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, Aluminum(7075-T7)(39.5% IACS) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 5 | |
| 2A1996-1 | ADAPTER, VACUUM FITTING | 2 | |
| 2C14025G04 | PUSHER SET, RACES/SEALS ‐ HPT ROTOR STAGE 1 | 1 | |
| 2C14025G05 | PUSHER SET, RACES/SEALS HPTR STAGE 1 | 3 | |
| 2C14026G03 | PULLER SET, RACES/SEALS HPTR STG.1 DISK | 1 | |
| 2C14029G04TK | PULLER, LPT MODULE +Enerpac RC506 Hydraulic Cylinder | 1 | |
| 2C14222G01 | STAND, INSTALL/REMOVE - HPT TURBINE ROTOR SHAFT SEALS AND BEARING RACES | 4 | |
| 2C14636P09 | BALANCE LPT EXTRACTOR | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 3 | |
| 2C14664G02 | Torque adapter set,retainer nut-no 5r inner bearing race | 1 | |
| 2C14664G04 | Torque adapter set,retainer nut-no 5r inner bearing race | 1 | |
| 2C14670G04 | WRENCH, 4R BEARING INNER RACE RETAINING NUT ( WRENCH ) ( OPTIONAL ) | 1 | |
| 2C14688G03/P31-P07 | PULLER SET,-RACES/SEALS HPTR STG.1 DISK | 1 | |
| 2C14688G04 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 4 | |
| 2C14688G05 | PULLER SET-STAGE 1 HPT DISK RACES | 2 | |
| 2C14688P05 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 1 | |
| 2C14688P08 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 1 | |
| 2C14688P27 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 1 | |
| 2C14821G01TK | HPTR Spacer/Cover Fixture | 1 | |
| 2C14821G02 | Fixture assy,restrain-hpt rotor spacer impeller | 1 | |
| 2C14923P08 | SPACER-LPT ROTOR BALANCE STAGE 3 | 1 | |
| 2C15042G03 | FIXTURE,MACHINING AND INSPECTION- HPT COUP. NUT | 2 | |
| 2C5693G01 | ADAPTOR - ACCY DRIVE | 1 | |
| 2C6047 | PULLER, ADAPTER - NO.4 BRG INNER RACES & FWD SEAL | 2 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6577 | FIXTURE,MACHINE/INSPECT-HPTR P | 1 | |
| 2C6577G01 | FIXTURE,MACHINE/INSPECT-HPTR P | 1 | |
| 2C6613G01 | GAGE IMMERSION DEPTH SPECIAL TOOL FOR IGNITER PLUG REPLACEMENT | 10 | |
| 2C6989G02 | TOOL - REMOVAL - LPTR SPACER RING | 1 | |
| 2C7182 | FIXTURE,MACHINE-HPT,STATIONARY | 1 | |
| 2C7182G01 | FIXTURE,MACHINE-HPT,STATIONARY | 1 | |
| 2C7185 | FIXTURE, MACHINE -HPT, STATION | 1 | |
| 2C7185G01 | FIXTURE, MACHINE -HPT, STATION | 1 | |
| 2C7497G01 | Tool Set, LPT Blade, Z Surfaces | 1 | |
| 2C81050G01 | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE | 3 | |
| 2C81156G01 | Adapter，torque，rachet-locknut，compressor rotor | 1 | |
| 2C81456G01 | PULLER, SPACER, STAGE 2 HPTR | 1 | |
| 2C81600G02 | Fixture,measuring,bevel gear backlash ptd | 1 | |
| 2C90020G01 | FIXTURE, BACKLASH, PTO ASSY | 1 | |
| 2C91059 | EXTRACTOR-BLD RTNR LPTR | 1 | |
| 2C91118 | FIXTURE, HPT ROTOR BACKUP | 1 | |
| 2C91176G01 | PUSHER-OUTERRACE PTO | 1 | |
| 2C91242G01 | PLATE - BACKING - LPT STG 4 | 1 | |
| 2C91243G01 | PLATE - BACKING - LPT STG 5 | 1 | |
| 2ME65B00002 | Wrench - Spanner, Safety Lanyard Tiedown Receptacle | 10 | |
| 2ME65B40005 | ADAPTER - AIR CYCLE MACHINE INSTALLATION AND REMOVAL | 1 | |
| 2ME65B89603 | ACCESSORY ADAPTER - HOIST SYSTEM RB211-524 AND CF6-50 ENGINES | 2 | |
| 2MIT2A264-0812-1 | ADAPTER PLATE - 40 TO 65 GALLON TANK (737NG ALL, 767 OPTIONAL AUX TANK SEE OPTIONS BELOW) (YOKOHAMA AEROSPACE AMERICA) | 5 | |
| 2MIT65-45109-22 | Protractor adapter | 5 | |
| 2MIT65-45109-22-1 | PROTRACTOR ADAPTER MISC TOOL | 1 | |
| 2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | 1 | |
| 2MIT65B01502 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 2 | |
| 2MIT65B01504-1 | TORQUE ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| 2MIT65B04008 | ADAPTADOR DE ACCIONAMIENTO ACTUADOR DE FLAPS | 1 | |
| 2MIT65B40500 | ADAPTADOR VENTILACIÓN ESTABILIZADOR HORIZONTAL ( CALIBRE ) | 1 | |
| 2MIT65B80307 | ADAPTER - PROTRACTOR CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 1 | |
| 2MIT65B82585 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 1 | |
| 2MITG5-45109-22 | PROTRACTOR ADAPTOR | 1 | |
| 2OHME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 5 | |
| 2PME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 7 | |
| 2RFL5 | PRESSURE GAUGE, 0 TO 200 PSI RANGE, 1/4 IN NPT, +/-1.00% GAUGE ACCURACY | 1 | |
| 2TE65B40004 | TEST EQPT PACK, INST A/C | 4 | |
| 2TSJ65B01504-1 | TEST ADAPTER - VENT VALVE, TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 1 | |
| 3.5OTJAADAPTERS | OVER TOP JACK ADAPTER 3.5 INCH | 1 | |
| 30-811-6100 | Sylvac 30-811-6100 Ultra Light Depth Gauge | 1 | |
| 30-811-6150 | Sylvac 30-811-6150 Ultra Light Depth Gauge | 1 | |
| 30-905-4516 | Sylvac Power/ Opto Cable RS232 | 1 | |
| 30-905-4519 | Sylvac Power/ Opto Cable RS232, 15m | 1 | |
| 30-910-2205 | Sylvac 30-910-2205 Depth Base for Calipers | 1 | |
| 30-926-5521 | Sylvac Opto Cable 2m, 9 Pin Female, Simplex | 1 | |
| 30-926-6521 | Sylvac Opto Cable 2m, 9 Pin Female, Duplex | 1 | |
| 30-926-6521A | Sylvac Opto Cable 2m, DB9F + Footswitch, Duplex | 1 | |
| 30-926-6535 | Sylvac Opto Cable 15m, 9 Pin Female, Duplex | 1 | |
| 30-926-6621 | Sylvac Opto Cable, 2m to USB | 1 | |
| 30-926-6821 | Sylvac 30-926-6821 Data Transmission Powered Opto Cable 2m to USB | 1 | |
| 30-926-USB | Sylvac Cable USB to Serial Adaptor | 1 | |
| 3008-550 | ADAPTER-ACCESS PANEL LEVERAGE | 2 | |
| 3008-550Q | ADAPTER ACC PANEL | 1 | |
| 3008-550 | ADAPTER ACCESS PANEL, LEVERAGE | 2 | |
| 30265-1310-0101 | ADAPTER BACKSHELL | 1 | |
| 3060-000-00 | ARMAMENT CIRCUIT PRELOAD TESTERS(ACPTS) | 1 | |
| 3061/93.65 | 3061/93.65;Capture MAC/IP | 1 | |
| 30MIT65B00112 | ADAPTER ASSEMBLY - JACKING, OUTBOARD WING BBL 932.6 | 10 | |
| 30P991001702-501 | WING JACKING PAD / MOORING ADAPTER | 1 | |
| 30P991001702‐501 | WING JACKING PAD / MOORING ADAPTER | 1 | |
| 36202 | IMPACT ADAPTER 1" (F) - 1.1/2" (M) NON SPARKING Cu-Be | 1 | |
| 36207 | IMPACT ADAPTER 1" (F) - 1.1/2" (M) NON SPARKING Al-Bron | 1 | |
| 38353 | Conn;Coax;CONN TNC ADPT JACK TO JACK | 1 | |
| 310075 | Vacuum Adapter (for 1/4 F/Hex Dr, M20) | 1 | |
| 310076 | Vacuum Adapter (for 1/4 F/Hex Dr, M23) | 1 | |
| 310077 | Vacuum Adapter (for 4mm D-Cut Dr, M20) | 1 | |
| 310113 | Vacuum Adapter for MDA Robotic Screwdrivers (1/4 F/Hex Dr) | 1 | |
| 313131 | EPT50100-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313132 | EPT50104-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313133 | EPT50120-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313134 | EPT50124-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313135 | EPT50200-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313136 | EPT50204-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313137 | EPT50300-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313138 | EPT50304-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313139 | EPT50500-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313140 | EPT50504-P Pistol Grip Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313141 | EPT50100-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313142 | EPT50104-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313143 | EPT50120-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313144 | EPT50124-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313145 | EPT50200-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313146 | EPT50204-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313147 | EPT50300-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313148 | EPT50304-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313149 | EPT50500-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/4 F/Hex) | 1 | |
| 313150 | EPT50504-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313151 | EPT50604-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313152 | EPT50804-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313153 | EPT50805-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/2 Sq. Dr.) | 1 | |
| 313154 | EPT50904-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (3/8 Sq. Dr.) | 1 | |
| 313155 | EPT5905-RA Right Angle Transducerized Cordless Driver w/Battery Pack Set (1/2 Sq. Dr.) | 1 | |
| 1004630 | USB 2.0 CABLE, 180 CM, TYPE A-B (PN 1004630) - FOR CONNECTION BETWEEN THE UNIT AND LAPTOP. – (NOTE: COTS EQUIVALENT IS ACCEPTABLE). | 1 | |
| 1019499 | PMAT 2000 RJ45 ADAPTER SET (BLACK) USUALLY PART OF THE PMAT BOX | 1 | |
| 1065073 | TOOL - STEEL ADAPTER AERO TURBINE WASHING MACHINE | 1 | |
| 2000042 | TB1 aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. 60,000 lb. (27,215 kg) capacity. Compatible with all AERO heads (EXCEPT Regional-3R, G500 & Global Express Heads). Also compatible with Tronair and other manufacturer's systems. | 2 | |
| 2001370 | Helicopter towbar System for CH-47 (Chinook) Helicopter. Towbar attaches to right rear wheel with convenient to use spring loaded slide pin and auxiliary tow head attaches to left rear wheel and a tie rod is pinned between the two tow heads this allows b | 1 | |
| 2001374 | Helicopter Towbar HT-647A, Apache, Blackhawk, Chinhook and Sikorsky towbar for single rear wheels models (or single front wheel Chinook) including: BLACKHAWK UH60, Apache, Sikorsky S-61, S-70A, and CH-46. | 1 | |
| 2001375 | Towbar for Apache-Blackhawk Helicopters: Light weight aluminum folding towbar designed for everyday ramp use that can be quickly folded for easy transportation and "fly-away" applications. | 1 | |
| 2001376 | Helicopter towbar for SH-60B, F Seahawk, HH-60H, J Jayhawk and Sikorsky S70B series with dual tail wheels:Specifications: 3 piece aluminum towbar (2 piece towbar and detachable head). Assembled overall length is approximately 24 ft., allowing turning clea | 1 | |
| 2001383 | Helicopter towbar designed as a special tow bar for towing the AS-350 helicopter from the rear.There are some helicopters with so much gear attached to the nose it is very difficult to pull them from the front without damage. This tow bar attaches to our | 1 | |
| 2001389 | Mechanical helicopter ground handling wheels for Bell 206A, B with pop out floatsJet rangers with the light weight 6 pac floats will require this single wheel design. | 1 | |
| 2005152 | UH60 towbar head for UH-60 Black Hawk and AH-64 Apache helicopters. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) | 1 | |
| 2019269 | PV90-4 (400-480VAC input) - 400 Hz 90kVA Solid-State GPU, UL APPROVED - Exclusions: input lead / output lead / shipping crate NOTE: Cannot be ordered by itself. Needs one of the mounting options below. | 1 | |
| 2019270 | PV90-4 (400-480VAC input) - 90kVA, 400 Hz Solid-State GPU - Exclusions: input lead / output lead / shipping crate NOTE: Cannot be ordered by itself. Needs one of the mounting options below. | 1 | |
| 2020324 | TRU-28 400Hz 28VDC tranformer/rectifier - Input: 200V 400Hz, typically from a 90KVA converter. Output: 28VDC - Exclusions: input lead ( unit is already fitted with a panel mounted 400Hz receptacle) / output lead / shipping crate | 1 | |
| 2210841 | OPT-TRU28 115VAC US SOCKETS | 1 | |
| 2550721 | Adapter. Feedback Lever Assy. | 1 | |
| 3003333 | DRILL MACHINE OPTI B 33 PRO | 1 | |
| 3101000 | EQPT-SELF RETRACTING LIFELIN | 1 | |
| 3164490 | AC/DC CLAMP ADAPTOR | 1 | |
| 12524493 | NLG JACK ADAPTER | 1 | |
| 22150762 | 22150762;AC Power Adapter - APM-424 VX | 1 | |
| 22165793 | 22165793;Adapter; PSD30-2AF Aircraft Interface Cable | 1 | |
| 22166784 | 22166784;PSD90-3 AC System Software Option | 1 | |
| 22168391 | Pcpt Mech;MIV-062 MINSTAC-12V VAC-60PSIG | 1 | |
| 23006782 | ADAPTER, TORQUE, TURBINE ATTACH | 2 | |
| 23006783 | ADAPTER, TORQUE TURBINE ATTACH UPPER NUT | 2 | |
| 23006785 | INSTALLATION TOOL--PACKING, SPUR ADAPTER GEAR | 2 | |
| 23034304 | MASK--BALANCE CUT, COMPRESSOR ROTOR IMPELLER LIMITS STOCK REMOVAL TO THE ACCEPTABLE AREAS WHEN BALANCING THE COMPRESSOR ROTOR ASSEMBLY. | 1 | |
| 23052530 | Adapter – Drive, Starter Shaft, PU Access Drive | 2 | |
| 23054788 | Puller / Pusher Blade Track 1st Stage LPT Rotor | 1 | |
| 23054790 | Puller / Pusher, Blade Track 3rd Stage, LPT Rotor | 1 | |
| 23055273 | Adapter – Attaching Diffuser/Compressor To Turnover Stand | 1 | |
| 23055732 | PULLER PTO REAR SEAL SPACER | 1 | |
| 23058409 | REAR PTO SEAL & SPACER PULLER | 1 | |
| 23090504 | PACKING PTFE SPRING ENEGIZED | 1 | |
| 31160001 | (*disc *OBSOLETE see 31170000) 3116/1-IMPACT ADAPTOR 1/4"-1/4" | 1 | |
| 31190000 | 3119.-IMPACT ADAPTOR 1/2"-1/4" | 1 | |
| 31576633 | CAUTION TAG FOR RECEPTACLE OF CARTRIDGE | 1 | |
| 32160001 | (*disc *OBSOLETE see 31180000) 3216/1-IMPACT ADAPTOR 3/8"-1/4" PLUG | 1 | |
| 107501874 | ADAPTER PINION , RAT SAFETY INTERFACE KIT (M1064267) | 1 | |
| 00190100100 | REMOVAL TOOLS FOR RECTANGULAR RECPTACLE | 8 | |
| 0292107610 | TACHY. ADAPTOR | 1 | |
| 0620720380 | RECEPTACLE | 1 | |
| 0620720390 | RECEPTACLE | 1 | |
| 0620750100 | EQUIPPED, NPT SENSOR BRACKET | 1 | |
| 0620750110 | EQUIPPED, NPT SENSOR BRACKET | 1 | |
| 18910920000 | TEST SET - DIGITAL AIR DATA (MODEL KTS-2000). RVSM COMPLIANCE. 3 OPTIONS: P/N 18910920000 (120VAC, 60HZ); P/N 18910920001 (120VAC, 400HZ); AND P/N 18910920002 (220VAC, 50HZ) | 2 | |
| 3140-1 | DC ADAPTOR INTERFACE CABLE | 1 | |
| 3140-10 | DC ADAPTOR INTERFACE CABLE | 1 | |
| 31509-1 | ADAPTER CABLE - ARINC 615 PORTABLE DATA LOADER (PDL) TO ACARS-MU | 1 | |
| 31691A0000-01 | Jacking Adapter for AW139 | 1 | |
| 3170003-1 | JACK ADAPTER, ENGINE BEAM | 1 | |
| 3201-0510 | TOOL PINO ESF ACO SPRT PORTA CPT CG AERO | 5 | |
| 3224-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 3224-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 3224-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 3224-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 32479-004 | SYRINGE TIP ADAPTER (BLACK) | 1 | |
| 327265 | ADAPTER, FLAP ROLLER, GREACE | 3 | |
| 32T104910-MIT-002 | ECLIPSE 500 MLG JACK ADAPTER | 1 | |
| 330-024 | FEED-THRU BULKHEAD JACK ADAPTER, 5 | 1 | |
| 33030002 | 513.IMP-IMPACT ADAPTOR 1/2"-3/8" PLUG | 1 | |
| 33030005 | 514.IMP-IMPACT ADAPTOR 1/2"-3/4" PLUG | 1 | |
| 3317.B | CASE-EMPTY BLACK INTERNAL CONFIG. | 1 | |
| 332A91-4105-02 | JACK ADAPTER PAD, MAIN LANDING GEAR, TOOL | 1 | |
| 332A91-4106-02 | JACK ADAPTOR | 1 | |
| 332A91-4205-00 | JACK ADAPTER PAD | 1 | |
| 332A91410502 | JACK-ADAPTER PAD MAIN LANDING GEAR | 1 | |
| 332A91420500 | JACK ADAPTEUR NOSE LANDING GEAR | 1 | |
| 332A93-3105-03 | EXTRACTOR,ADAPTOR BOLT | 1 | |
| 332A95-5201-00 | JACK ADAPTER PAD | 1 | |
| 3377403 | SPACER PULLEY ADAPTOR | 1 | |
| 340-402-006-0 | VALVE-LPTACC | 1 | |
| 3400A0000-01W01 | ADAPTER, MANUAL AC-TUATION | 1 | |
| 342150-7001 | SMART BREACH PLATE ADAPTER(SBPA) - NSN: 4920-01-573-8926; OEM: BAE SYSTEMS | 1 | |
| 35-590006 | MAIN WHEEL JACK ADAPTER | 1 | |
| 35-92122-0001 | ADAPTADOR VACIADO COMBUSTIBLE CON MANGUERA | 1 | |
| 35-92213-0001 | ADAPTER LH, JACKING REARFUSELAGE | 1 | |
| 35-92214-0001 | ADAPTER RH, JACKING REARFUSELAGE | 1 | |
| 35-92236-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92237-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92238-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92239-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92247-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92248-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92271-0001 | ADAPTER LH, JACKING REAR FUSELAGE | 1 | |
| 35-92272-0001 | ADAPTER RH, JACKING REAR FUSELAGE | 1 | |
| 35-92273-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92274-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92281-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92282-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92285-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | 1 | |
| 35-92286-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | 1 | |
| 35-92307-0001 | Adapter Jacking NLG | 1 | |
| 35-92315-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35030003 | 568.IMP-IMPACT ADAPTOR 3/4"-1/2" PLUG | 1 | |
| 35030006 | 569.IMP-IMPACT ADAPTOR 3/4"-1" PLUG | 1 | |
| 35066GV08 | COUPLING ADAPTER, PRESSURE TEST, ACT | 2 | |
| 359-0697-020 | REMOVAL TOOL,CONNECTOR FIBER OPTIC CONTACT | 5 | |
| 36030005 | 866.IMP-IMPACT ADAPTOR 1"-3/4" PLUG | 1 | |
| 36030006 | 867.IMP-DISC*IMPACT ADAPTOR 1.1/2-1 | 1 | |
| 36030007 | 865IMP-IMPACT ADAPTOR 1.1/2"-1" | 1 | |
| 365A91214102 | ADAPTER AIRCRAFT JACKING | 1 | |
| 365G | Transducer Guide, 737 PT4 72-20-01, with string attached | 1 | |
| 367404 | PROBE (PENCIL TIP) BLACK (ALL EXCEPT PISTOL GRIP) | 3 | |
| 36MIT65B0014 | NOSE JACK ADAPTER | 1 | |
| 36MIT65B00141 | JACK ADAPTER - FORWARD BODY | 10 | |
| 36MIT65B00141* | JACK ADPTFWD BODY | 10 | |
| 36MIT65B00141-1 | JACK ADAPTER -0 NOSE | 4 | |
| 36MIT65B00141-201 | Jack adapter-forward body | 1 | |
| 370-0033-050 | CONNECTOR, RECEPTACLE, ELECTRICAL | 1 | |
| 370-0036-010 | RECEPTACLE ELECTRICAL | 1 | |
| 372-2330-020 | CONNECTOR, RECEPTACLE, ELECTRICAL | 1 | |
| 3791058-1 | ADAPTER SET BLACKLASH CHECKING | 1 | |
| 37D403063P02 | SPACER, HPT STATOR GRINDING | 1 | |
| 38-1447-10 | Foot Operated Floor Model Shrinker & Stretcher Accessories (Description: Conversion Assembly (ERCO to Marchant)**) (Add to cart: Contact us to order) | 1 | |
| 38-1580-1 | Mini Air Vac (Description: Mini Air Vac with 18" Flex Hose) (Add to cart: Add To Cart) (Description: Mini Air Vac with 12" Rigid Hose) (Add to cart: Add To Cart) (Description: Replacement Bag) (Add to cart: Add To Cart) | 3 | |
| 38-385-01 | TRANSDUCER CALIBRATION & ACCEPTANCE TEST BOX | 1 | |
| 38-6094 | Deep Throat Metal Punch Kit (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Bench Mount Base) (Add to cart: Add To Cart) (Description: Replacement Punch & Die Sets) (Size/diameter: 3/32") (Add to cart: Add To Cart) | 1 | |
| 38-6125 | Deep Throat Metal Punch Kit (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Bench Mount Base) (Add to cart: Add To Cart) (Description: Replacement Punch & Die Sets) (Size/diameter: 3/32") (Add to cart: Add To Cart) (Description: Repla | 1 | |
| 38-6156 | Deep Throat Metal Punch Kit (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Bench Mount Base) (Add to cart: Add To Cart) (Description: Replacement Punch & Die Sets) (Size/diameter: 3/32") (Add to cart: Add To Cart) (Description: Repla | 1 | |
| 38-6188 | Deep Throat Metal Punch Kit (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Bench Mount Base) (Add to cart: Add To Cart) (Description: Replacement Punch & Die Sets) (Size/diameter: 3/32") (Add to cart: Add To Cart) (Description: Repla | 1 | |
| 38-6250 | Deep Throat Metal Punch Kit (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Bench Mount Base) (Add to cart: Add To Cart) (Description: Replacement Punch & Die Sets) (Size/diameter: 3/32") (Add to cart: Add To Cart) (Description: Repla | 1 | |
| 38-9300 | USATCO Bench Model Shrinker & Stretcher Accessories (Description: Conversion Assembly (stretcher to shrinker)) (Add to cart: Add To Cart) (Description: Conversion Assembly (shrinker to stretcher)) (Add to cart: Add To Cart) (Description: Replacement Shrin | 1 | |
| 38-9301 | USATCO Bench Model Shrinker & Stretcher Accessories (Description: Conversion Assembly (stretcher to shrinker)) (Add to cart: Add To Cart) (Description: Conversion Assembly (shrinker to stretcher)) (Add to cart: Add To Cart) (Description: Replacement Shrin | 1 | |
| 38-AVP2-B | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) (Description: 5" Wide Nozzle) (Add to cart: Add To Cart) (Description: 18" Rigid Extension Wand) (Add to car | 1 | |
| 38-AVP8 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) (Description: 5" Wide Nozzle) (Add to cart: Add To Cart) (Description: 18" Rigid Extension Wand) (Add to car | 1 | |
| 38-AVP9 | USATCO Supersonic Air Vac Accessories (Description: Round Brush) (Add to cart: Add To Cart) (Description: Crevice Tool) (Add to cart: Add To Cart) (Description: 5" Wide Nozzle) (Add to cart: Add To Cart) (Description: 18" Rigid Extension Wand) (Add to car | 1 | |
| 3823766 | SPACER PULLEY ADAPTOR | 1 | |
| 386-40-1 | ADAPTER PITOT STATIC/VACUUM CUP | 1 | |
| 39-520CTK | Portable Pneumatic Swaged Terminal Pull Tester Kit (Description: Rebuilt Kit*) (Add to cart: Contact us to order) | 1 | |
| 390-810000/928 | JACK ADAPTER-MAIN LDG GEAR | 2 | |
| 3954090-1 | RETRACT CYL GLAND ADAPTER | 1 | |
| 3A2613 | ADAPTER, VACUUM | 1 | |
| 3A3658 | VACUM FITTING ADAPTER | 1 | |
| 3A3658-1 | TEST ADAPTER, VACUUM FITTING | 2 | |
| 3A3865-1 | ADAPTOR, VACUUM FITTING | 1 | |
| 3A3895-1 | ADAPTOR, VACUUM FITTING | 1 | |
| 3A4041-1 | *TOOL, PACKING (OPTIONAL) | 1 | |
| 3C3866G01 | ADAPTOR SET, PROTRACTOR JGV | 1 | |
| 3G0105G00232 | JACK ASSY HELICOPTER LIFTING | 1 | |
| 3G0705G00231 | JACK ASSY, HELICOPTER LIFTING | 1 | |
| 3G0705G00232 | JACK ASSY, HELICOPTER LIFTING | 1 | |
| 3G0805G00331 | JACKING BRACKET, HELICOPTER WEIGHING | 1 | |
| 3G0805G00332 | JACKING BRACKET, HELICOPTER WEIGHING | 1 | |
| 3G2405G00531 | DC INTERFACE ADAPTER | 1 | |
| 3G3130G00131 | HUMC/LAPTOP CABLE INTERFACE | 1 | |
| 3MIT65B03670 | ADAPTER - SAFETY ROD, HORIZONTAL STABILIZER ACTUATOR | 5 | |
| 3MIT65B80307-1 | ADAPTER - CONTROL COLUMN ASSEMBLY PROTRACTOR | 7 | |
| 3MIT65B80713 | MISCELLANEOUS TOOL AIR MOTOR - STABILIZER JACKSCREW ADAPTER | 3 | |
| 3MIT65B82585 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 3 | |
| 3SF4290 | APU JACKING R/I 737 ADAPPTER | 1 | |
| 3SF5940-501 | VSV ACUATOR PUMP ADAPTER | 1 | |
| 3TE65 73762 | JACKING ADAPTER NO | 3 | |
| 3TE65-73762 | JACKING ADAPTER -0 NOSE GEAR INST’L | 3 | |
| 4002-4 | STUD ASSEMBLY & RECEPTACLE | 15 | |
| 4013-1 | UARRSI RECEPTACLE R/I SLING, P/N 4013-1, NSN 1730- | 1 | |
| 4015498-001 | CABLE ASSY, ADAPTER, 446 BE AEROSPACE | 1 | |
| 402034-005 | ADOPTER CABLE OUTPUT AC 115 V | 1 | |
| 402034-007 | ADOPTER CABLE OUTPUT AC 115 V | 1 | |
| 4041779-001 | CABLE, ADAPTOR, PC BOARD BE AEROSPACE (POST SB267SV-25-060)(POST SB267SV-25-063) | 1 | |
| 4049761-901 | INTERFACE ADAPTER | 1 | |
| 4052886-901 | INTERFACE ADAPTER | 1 | |
| 40541709ST | OUTLET LEAK TEST ADAPTOR B/E AEROSPACE SYSTEMS (COLLINS) | 1 | |
| 40543147ST | OUTLET FLOW TEST ADAPTOR B/E AEROSPACE SYSTEMS (COLLINS) | 1 | |
| 4071046-901 | INTERFACE ADAPTER | 1 | |
| 4091449-902 | OPTICAL TEST STATION (MCDU PROGRAMMING AND CALIBRATION STATION (PACS)) | 1 | |
| 41035G-02 | ADAPTER CORD WITH PJ-051 JACK | 4 | |
| 41035G-06 | DAVID CLARK (DC) CLA41035G-06 ADAPTOR, PUSHBACK GATEWAY CABLE | 1 | |
| 41090G-15 | CHARGER ADAPTER CORD 230VAC | 3 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 9 | |
| 420315-1 | TEST SET - ACCEPTANCE | 1 | |
| 421-230 | WING COVERS (outboard of engine nacelle), no tiptanks, WINTER USE (set of 2) | 1 | |
| 421-235 | WING COVERS (outboard of engine nacelle), no tiptanks, ALL YEAR USE (set of 2) | 1 | |
| 440-1-ACR1-DX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) | 1 | |
| 440-1-ACR1-RX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-1-ACR1X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-2-ACR2-DX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-2-ACR2-RX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-2-ACR2X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 5 | |
| 440-22-ACR2-RX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-22-ACR2X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-3-ACR3-DX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-3-ACR3-RX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 440-3-ACR3X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 3 | |
| 446-2-ACR2-DX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 44MR | Moore & Wright R/P Depth Gauge, Protractor, 0-150mm | 1 | |
| 4507100100-001 | NOSE LEARJET 40/45 JACKPAD ADAPTERS | 1 | |
| 4507100100-003 | NOSE JACK ADAPTER | 1 | |
| 4507100100-005 | NOSE JACK ADAPTER | 1 | |
| 4507100101-003 | ADAPTER ASSY, JACK-WING | 2 | |
| 4507100101-005 | ADAPTOR ASSY, JACK, WING, W/TIE DOWNS | 6 | |
| 4507100101-005 | ADAPTOR ASSY, JACK, WING, W/TIE | 6 | |
| 4507100101-007 | ADAPTER ASSY, JACK-WING | 4 | |
| 4507100102-001 | WING LEARJET 40/45 JACKPAD ADAPTERS | 1 | |
| 4507100104-001 | Nose Jack Adapter Tie-Down | 3 | |
| 4507100104-003 | ADAPTER ASSY, JACK, NOSE | 4 | |
| 455 | RECEPTACLE | 4 | |
| 455-65BNC5007133NE | ADAPTER COAXIAL CONNECTOR BNC PLUG, MALE PIN TO BNC JACK, FEMALE SOCKET (2) 50 OHMS | 1 | |
| 45A99147-001 | JACK ADAPTER BENCH 400 | 4 | |
| 460002661-3 | TEST ADAPTOR - MLG RETRACT ACTR A320NEO | 10 | |
| 460002662-4 | TEST ADAPTOR - MLG RETRACT ACTR A320NEO | 1 | |
| 460004094-12 | TEST ADAPTOR - MLG RETRACT ACTR A320NEO | 4 | |
| 460006223-A | JACKING DOME ADAPTOR | 1 | |
| 478510 | Henkel 982644 LOCTITE 14 x 18 NPT Thread to Cartridge End Fischbach Cartridge Adapter | 1 | |
| 46082143 | OHU ACCEPTANCE TEST TOOLING | 1 | |
| 460005883 | TORQUE ADAPTOR - MLG DOOR ACTUATOR | 4 | |
| 460006223 | JACKING DOME ADAPTOR | 5 | |
| 460006487 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460006489 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006490 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006492 | TEST ADAPTOR - MLG RETRACT ACTR A320NEO | 4 | |
| 460006565 | JACKING DOME ADAPTER | 1 | |
| 460006806 | TORQUE REACTION ADAPTOR | 1 | |
| 460007242 | ADAPTOR-TORQUE REACTOR | 20 | |
| 460007243 | RECEPTACLE - MLG A320NEO | 4 | |
| 4600067157 | TORQUE ADAPTOR RET.ACT. NUT | 1 | |
| 4617101275 | ACCELEROMETER ADAPTOR | 1 | |
| 4621BSC | RECEPTACLE WITH OVAL SHIELD SNAP COVER | 1 | |
| 4715234-1 | M/L/G LACH CYL TORQUE ADAPTER | 1 | |
| 48-10R20-25SN | RECEPTACLE | 1 | |
| 48-10R20-25SN-100 | RECEPTACLE | 1 | |
| 480-2-ACR2-RX | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 1 | |
| 480-2-ACR2X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 3 | |
| 480-3-ACR3 | APEX INSRT ACR BITS 4 PHILLIPS 5/16" HEX INSERT PT SZ=#3 | 1 | |
| 480-3-ACR3-D | APEX INSRT ACR BITS 4 PHILLIPS 5/16" HEX INSERT -D PT SZ=#3 | 1 | |
| 480-3-ACR3-R | APEX INSRT ACR BITS 4 PHILLIPS 5/16" HEX INSERT -R PT SZ=#3 | 1 | |
| 480-3-ACR3X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 3 | |
| 480-4-ACR4 | APEX INSRT ACR BITS 4 PHILLIPS 5/16" HEX INSERT PT SZ=#4 | 1 | |
| 480-4-ACR4-D | APEX INSRT ACR BITS 4 PHILLIPS 5/16" HEX INSERT -D PT SZ=#4 | 1 | |
| 480-4-ACR4-R | APEX INSRT ACR BITS 4 PHILLIPS 5/16" HEX INSERT -R PT SZ=#4 | 1 | |
| 480-4-ACR4X | Apex® ACR Anti-Camout Phillips Insert Bits (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Driving) (Add to cart: Add To Cart) (Description: 1/4" Hex Insert ACR) (Overall length: 1") (Point size: 1) (Type: Removal) (Add to c | 3 | |
| 49-12300 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12301 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12312 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12324 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12330 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12331 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12354 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12361 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 4916701 | ADAPTER JACK | 2 | |
| 4916701-1 | NOSE & TAIL JACK ADAPTER | 9 | |
| 4916702-1 | ADAPTER JACK | 2 | |
| 4916702-501 | MAIN JACK ADAPTER | 10 | |
| 4916764-1 | NLG TORQUE ADAPTER RETRACT VENTRAL | 2 | |
| 4916764-501 | NLG RETRACT CYLINDER TORQUE ADAPTER | 2 | |
| 4916788-1 | ADAPTER RETRACT CYL TQ | 1 | |
| 4920-99-192-0874 | EXTRACTOR ADAPTER | 1 | |
| 4951035-10 | BACKSHELL STRAIGHT ADAPTER | 1 | |
| 49956 | CONNECTOR,RECEPTACLE,ELECTRICAL | 2 | |
| 4920010485821 | ADAPTER KIT JACKING | 1 | |
| 4CFH9 | PRESSURE GAUGE, 0 TO 600 PSI, 0 TO 4000 KPA RANGE, 1/4 IN NPT, ±3-2-3 GAUGE ACCURACY | 1 | |
| 4FLT5B | VACUUM GAUGE: 30 TO 0 IN HG, 2 IN DIAL, 1/4 IN NPT MALE, BOTTOM, DUAL | 1 | |
| 4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
| 4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| 4MIT65B80307-1 | PROTRACTER ADAPTER | 32 | |
| 4PRE65B00163-1 | PROTECTIVE EQPT-ACTUATOR BOSS | 8 | |
| 4ZM12 | REGULATOR, AIR COMPRESSOR AIR INLET/OUTLET SIZE: 2", AIR INLET/OUTLET TYPE: NPT (FEMALE), MAX.FLOW RATE: 2000CFM, MAX.OPERATING PRESSURE: 450 PSI, MANUFACTURE: SPEEDAIR | 1 | |
| 5-15P | 125V DETACHABLE PLUG ADAPTER 15A | 1 | |
| 5-15P PLUG | 125V DETACHABLE PLUG ADAPTER 15A | 1 | |
| 5-2869 | LEVERAGE ADAPTER - ACCESS PANEL | 1 | |
| 500-176518-01 | RACK ADAPTOR - CARLISLE | 1 | |
| 500-176518-02 | RACK ADAPTOR - CARLISLE | 1 | |
| 500-176518-03 | RACK ADAPTOR - CARLISLE | 1 | |
| 500-176518-04 | RACK ADAPTOR - CARLISLE | 1 | |
| 500-19741-01 | RACK ADAPTOR - CARLISLE | 1 | |
| 5010-7 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 50181010 | TORQUE WRENCH SERVICE MANOSKOP® WITH RECEPTACLE FOR INSERT TOOLS NO. 730N/10 20-100 NM 15-75 FT.LB 50181010 | 1 | |
| 5020-1 | OPTION: 220/230VAC 3PH 60H, | 2 | |
| 5020-2 | OPTION: 380VAC 3PH 60HZ, | 1 | |
| 50201ZZ1 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 50210 | Dynabrade® Vacuum Shroud Disc Sanders (Description: Self Generated Vacuum) (Overall length: 10" (25.4 cm)) (Shroud height: 1" (25.4 mm)) (Add to cart: Add To Cart) | 1 | |
| 50211 | Dynabrade® Vacuum Shroud Disc Sanders (Description: Self Generated Vacuum) (Overall length: 10" (25.4 cm)) (Shroud height: 1" (25.4 mm)) (Add to cart: Add To Cart) (Description: Central Vacuum) (Overall length: 9-11/16" (24.7 cm)) (Shroud height: 1" (25.4 | 1 | |
| 5030-2 | OPTION: 380VAC 3PH 60HZ, | 1 | |
| 5030-3 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 5030-4 | OPTION: 575VAC 3PH 60HZ, | 1 | |
| 50561 | Dynabrade® Vacuum Shroud Disc Sanders (Description: Self Generated Vacuum) (Overall length: 10" (25.4 cm)) (Shroud height: 1" (25.4 mm)) (Add to cart: Add To Cart) (Description: Central Vacuum) (Overall length: 9-11/16" (24.7 cm)) (Shroud height: 1" (25.4 | 1 | |
| 50570 | Dynabrade® Vacuum Shroud Disc Sanders (Description: Self Generated Vacuum) (Overall length: 10" (25.4 cm)) (Shroud height: 1" (25.4 mm)) (Add to cart: Add To Cart) (Description: Central Vacuum) (Overall length: 9-11/16" (24.7 cm)) (Shroud height: 1" (25.4 | 1 | |
| 506-23-1 | TRIPOD JACKS - ADAPTER (CAP) | 1 | |
| 506-23-2 | TRIPOD JACKS - ADAPTER (CAP) | 1 | |
| 507-20-12-051 | ADAPTOR, MAIN WHEEL JACK | 1 | |
| 507-20-12-052 | ADAPTOR, NOSE WHEEL JACK | 1 | |
| 507.20.12.050 | PC-12 SINGLE POINT NOSE LANDING GEAR JACK ADAPTER | 1 | |
| 507.20.12.051 | ADAPTOR, MAIN WHEEL JACK | 1 | |
| 507.20.12.052 | ADAPTOR, NOSE WHEEL JACK | 1 | |
| 5221 | Bend-A-Light Pro (Description: Bend-A-Light) (Overall length: 18" (46 cm)) (Add to cart: Contact us to order) | 1 | |
| 50771 | Dynabrade® Vacuum Shroud Disc Sanders (Description: Self Generated Vacuum) (Overall length: 10" (25.4 cm)) (Shroud height: 1" (25.4 mm)) (Add to cart: Add To Cart) (Description: Central Vacuum) (Overall length: 9-11/16" (24.7 cm)) (Shroud height: 1" (25.4 | 1 | |
| 50789 | Dynabrade® Vacuum Shroud Disc Sanders (Description: Self Generated Vacuum) (Overall length: 10" (25.4 cm)) (Shroud height: 1" (25.4 mm)) (Add to cart: Add To Cart) (Description: Central Vacuum) (Overall length: 9-11/16" (24.7 cm)) (Shroud height: 1" (25.4 | 1 | |
| 509767 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 509767/884EH/84EH-3/CSA77700HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 50E20-1AK7 | RECEPTACLE,TURNLOCK FASTENER | 1 | |
| 50MIT65B00112 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 9 | |
| 50MIT65B0012 | WING JACK ADAPTER (2 EA REQ) | 2 | |
| 5110-3 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 5110-5 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 5120-01-144-5533 | ADAPTER MECHANICAL PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| 51268-1701-0102 | ADAPTER CABLE - FQIS TESTER INTERFACE CARD | 1 | |
| 513.IMP | IMPACT ADAPTOR 1/2"-3/8" PLUG | 1 | |
| 514.IMP | IMPACT ADAPTOR 1/2"-3/4" PLUG | 1 | |
| 515501 | ADAPTER _FOR SUP-PORT BRACKET | 1 | |
| 520CTK | Portable Pneumatic Swaged Terminal Pull Tester Kit (Description: Rebuilt Kit*) (Add to cart: Contact us to order) (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 520SG | Swaged Terminal Gauge (Description: Swaged Terminal Gauge) (Add to cart: Contact us to order) | 1 | |
| 5210-6 | OPTION: 220VAC 3PH 50HZ, | 1 | |
| 5211-7 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 52110061 | 7761-INTERFACE ADAPTOR 9V OUTPUT | 1 | |
| 52271B000-01 | PACK ACCEPTANCE TEST BOX | 1 | |
| 52271B0000-01 | PACK-ACCEPTANCE TEST-BOX | 1 | |
| 52271B0000-03 | PACK ACCEPTANCE TEST BOX | 1 | |
| 52271D0000-03 | PACK ACCEPTANCE TEST BOX | 1 | |
| 5230-8 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 5268-C-XX | CABLE - ADAPTER - BNC (MALE) TO TWO SINGLE STACKABLE BANANA PLUGS (RED & BLACK) | 1 | |
| 52680A0000-01 | TEST ADAPTER ACTUATOR ASSY | 1 | |
| 52742 | Dynabrade® Vacuum Shroud Disc Sanders (Capacity: 2") (Overall length: 10-1/4" (24.7 cm)) (Add to cart: Add To Cart) (Capacity: -) (Overall length: -) (Description: Replacement Vacuum Shroud) (Add to cart: Add To Cart) | 1 | |
| 53-127-4C | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 53-127K | USATCO Angle Drill Attachment Kit (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 53-1354 | USATCO Rivet Gun Set Packs (Description: Complete Set) (Add to cart: Add To Cart) | 1 | |
| 53-1355 | USATCO Rivet Gun Set Packs (Description: Complete Set) (Add to cart: Add To Cart) | 1 | |
| 53-137 | USATCO Bench Model Shrinker & Stretcher (Description: Metal Shrinker) (Capacity: 16 ga.) (Add to cart: Add To Cart) (Description: Metal Stretcher) (Capacity: 16 ga.) (Add to cart: Add To Cart) (Description: Both Units) (Capacity: 16 ga.) (Add to cart: Add | 1 | |
| 53-16071 | Drill Stand & Slip Bushing Sets (Description: 5 PC Number Set) (Add to cart: Add To Cart) (Description: 5 PC Fractional Set) (Add to cart: Add To Cart) | 1 | |
| 53-16075 | Drill Stand & Slip Bushing Sets (Description: 5 PC Number Set) (Add to cart: Add To Cart) (Description: 5 PC Fractional Set) (Add to cart: Add To Cart) (Description: 10 PC Piece Set) (Add to cart: Add To Cart) | 1 | |
| 53-2961 | THD SHANK ADAPTER DRILL SET 4PC, FRACTIONAL, 1-1/4 | 1 | |
| 53-501A | Power Hand Rivet Squeezer (Description: Tool Only) (Reach: 2-1/2") (Gap: 1-1/8") (Add to cart: Contact us to order) (Description: Squeezer Kit) (Reach: 2-1/2") (Gap: 1-1/8") (Add to cart: Add To Cart) | 1 | |
| 53-502AH-D | 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1-1/2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 3") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Squeezer Kit) (Reach: 1-1/2") (Gap: 1-1/4") (Add | 1 | |
| 53-502AH-E | 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1-1/2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 3") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Squeezer Kit) (Reach: 1-1/2") (Gap: 1-1/4") (Add | 1 | |
| 53-5104 | USATCO Rivet Gun Set Packs (Description: Complete Set) (Add to cart: Add To Cart) | 1 | |
| 53-5105 | USATCO Rivet Gun Set Packs (Description: Complete Set) (Add to cart: Add To Cart) | 1 | |
| 53-590S | Back Countersink & Spotfacer Kits (Description: 14 PC Back Spotfacer Kit High Speed Steel) (Add to cart: Add To Cart) | 2 | |
| 53-590SC | Back Countersink & Spotfacer Kits (Description: 14 PC Back Spotfacer Kit High Speed Steel) (Add to cart: Add To Cart) (Description: 14 PC Back Spotfacer Kit Solid Carbide) (Add to cart: Add To Cart) | 1 | |
| 53-590TA | Back Countersink & Spotfacer Kits (Description: 14 PC Back Spotfacer Kit High Speed Steel) (Add to cart: Add To Cart) (Description: 14 PC Back Spotfacer Kit Solid Carbide) (Add to cart: Add To Cart) (Description: 14 PC Back Countersink Kit High Speed Stee | 2 | |
| 53-590TAC | Back Countersink & Spotfacer Kits (Description: 14 PC Back Spotfacer Kit High Speed Steel) (Add to cart: Add To Cart) (Description: 14 PC Back Spotfacer Kit Solid Carbide) (Add to cart: Add To Cart) (Description: 14 PC Back Countersink Kit High Speed Stee | 1 | |
| 53-77 | Drill Attachment Conversion Assembly (Includes: 1/4"-28 Adapter 5/32" Chuck) (Add to cart: Add To Cart) | 1 | |
| 53-DA-2 | DA Series 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 2-1/2") (Gap: 1-5/8") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 6") (Gap: 1-5/8") (Add to cart: Add To Cart) (Description: Squeezer Kit) (Reach: 2-1/2") (Gap: 1- | 1 | |
| 53-DA-5 | DA Series 360° Swivel Hand Rivet Squeezers (Description: Tool Only) (Reach: 2-1/2") (Gap: 1-5/8") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 6") (Gap: 1-5/8") (Add to cart: Add To Cart) (Description: Squeezer Kit) (Reach: 2-1/2") (Gap: 1- | 1 | |
| 53-THS10 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 53-THS20 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 53-THS22 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 53-THS30 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 53-THS40 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 53-THS50 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 53-THS60 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| 5310-4 | OPTION: 575VAC 3PH 60HZ, | 1 | |
| 5310-5 | OPTION: 200VAC 3PH 50HZ, | 2 | |
| 5310-6 | OPTION: 220VAC 3PH 50HZ, | 2 | |
| 53100888-1 | RECEPTACLE DUMMY STOWAGE | 1 | |
| 5311-4 | OPTION:575VAC 3PH 60HZ, | 1 | |
| 5349 | ACER ASPIRE LAPTOP | 1 | |
| 5748 | RF ADAPTER ACCESORIES KIT | 1 | |
| 56091 | Bend-A-Light Pro (Description: Bend-A-Light) (Overall length: 18" (46 cm)) (Add to cart: Contact us to order) (Description: Replacement Bulb) (Add to cart: Contact us to order) | 1 | |
| 57308 | OPTION:415VAC 3PH 50HZ, | 1 | |
| 57575 | 57575;PSDA300-4 FQIS Interface Adapter | 1 | |
| 58003 | 58003;Adapter W1 Shorting CN235AC | 1 | |
| 531320163 | HOSE ADAPT.TIRE-JACK SMALL | 1 | |
| 531320164 | HOSE ADAPT.TIRE-JACK BIG | 1 | |
| 5320-8 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 53207-2001 | FLAP ACTUATOR BALL SCREW ADAPTER | 3 | |
| 53207–2001 | FLAP ACTUATOR BALL SCREW ADAPTER | 3 | |
| 5321-3 | OPTION:440/460VAC 3PH 60HZ, | 1 | |
| 53211ZZ8 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 532740157-1 | ADAPTER JACKSCREW | 1 | |
| 532740157-2 | ADAPTER JACKSCREW | 1 | |
| 5330-7 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 5331-3 | OPTION:440/460VAC 3PH 60HZ, | 1 | |
| 5331-8 | OPTION:415VAC 3PH 50HZ, | 1 | |
| 5393K36 | VACUUM HOSE TO CONNECT PUMP TO ASPIRATOR ADAPTER | 1 | |
| 5410-1 | HYDRAULIC POWER UNIT, OPTION 220/230VAC 3PH 60H | 1 | |
| 5410-2 | OPTION: 380VAC 3PH 60HZ, | 1 | |
| 5421-4 | OPTION:575VAC 3PH 60HZ, | 1 | |
| 5421-5 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 543-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 9 | |
| 5431-0 | OPTION;208VAC 3PH 60HZ | 2 | |
| 5431-8 | OPTION:415VAC 3PH 50HZ, | 1 | |
| 54311AI7EK4 | PAINT OPTION TRONAIR BLUE AI COUPLINGS INCLUDED 380VAC/3PH/50HZ 25FT HOSES SINGLE SYSTEM HOURMETER 5 | 1 | |
| 55-1203-01 | INTERFACE ADAPTER | 1 | |
| 55-1203-10 | INTERFACE ADAPTER | 1 | |
| 550T05658-401 | ADAPTER, JACKING-WING | 1 | |
| 550T05658-401 | ADAPTER,JACKING-WING | 1 | |
| 550T05661-401 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
| 550T05661-403 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 5510-9 | OPTION:440VAC 3PH 50HZ, | 1 | |
| 5520-7 | OPTION:380VAC 3PH 50HZ, | 2 | |
| 55211ZZ7 | OPTION:380VAC 3PH 50HZ, | 1 | |
| 5522A | SUPERIOR MULTIORIDUCT CALIBRATOR + 1.1 GHZ SCOPE OPT WITH ACCESSORIES - P/N: 5522A/1GHZ 240 | 1 | |
| 55315A21 | ADAPTER; SQUARE DRIVE, BLACK, 3/8 | 1 | |
| 554-6109-001 | LOW CAPACITY ANTENNA ADAPTER | 1 | |
| 558-2-05979 | CLAMP POTTING RECEPTACLE CONNECTOR | 1 | |
| 5610-2 | OPTION:380VAC 3PH 60HZ, | 1 | |
| 5620-2 | OPTION:380VAC 3PH 60HZ, | 1 | |
| 5630-1 | OPTION:220/230VAC 3PH 60HZ, | 1 | |
| 571093T02 | SBA320 57-1093 flaptrack rem pend' bear' | 1 | |
| 5720-8 | OPTION:415VAC 3PH 50HZ, | 1 | |
| 5730-9 | OPTION:440VAC 3PH 50HZ, | 1 | |
| 5830-9 | OPTION: 440VAC: 3PH: 50HZ, | 1 | |
| 5832-8 | OPTION: 415VAC: 3PH: 50HZ, | 1 | |
| 58530193-1 | ADAPTER SEAT BACK | 1 | |
| 58532-1 | FRAME; PC III; FIBER OPT; BLACK | 1 | |
| 5916703-501 | NOSE GEAR JACK ADAPTER | 8 | |
| 5963309-1 | Adapter-angle of attack protractor | 1 | |
| 5D0020-10 | RECEPTACLE | 1 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 3 | |
| 5MIT65B01502 | Torque adapter-retract actuator B.L.G. | 1 | |
| 5MIT65B01502-1 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 1 | |
| 5SE00859-1 | ACFT PWR ADAPTER | 1 | |
| 6.62501E 12 | PRESSURE ADAPTER ASSEMBLY, NITROGEN SERVICING UNIT TO AERIAL REFUEL RECEPTACLE | 1 | |
| 6000OPT3 | SOFTWARE, ACCESS KEY CODE ADS-B OPTION | 11 | |
| 60696 | ADAPTER 3/8" (F) - 1/2" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 60698 | ADAPTER 1/2" (F) - 3/8" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 60699 | ADAPTER 1/2" (F) - 3/4" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 60700 | ADAPTER 3/4" (F) - 1/2" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 60701 | ADAPTER 3/4" (F) - 1" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 60702 | ADAPTER 1" (F) - 3/4" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 606027 | Henkel 98181 LOCTITE 14 NPT Semco Cartridge Adapter - Pack of 3 | 1 | |
| 609-001 | THRUST PIECE ADAPTER, AIRCRAFT JACKING POINT | 1 | |
| 60G2756004N001 | SPLINED FLAP DRIVE ADAPTER (GAC GSE 2720570) | 1 | |
| 60MIT65B00112 | JACKING ADAPTER ASSEMBLY - OUTBOARD WING WBL 938.8 | 1 | |
| 610-612 | Compact Flash PC Card Adapter | 1 | |
| 61100-101 | VACUM ASPIRATOR ADAPTER | 2 | |
| 6125-010 | TACHOMETER - PORTABLE, OPTICAL | 1 | |
| 61657-7 | WEAR GAUGE REFUEL RECEPTACLE ADAPTER | 1 | |
| 61695 | ADAPTER BIT 1/4" - 1/4" L: 65 MM FOR IMPACT SOCKETS | 1 | |
| 61696 | ADAPTER BIT 1/4" - 3/8" L: 65 MM FOR IMPACT SOCKETS | 1 | |
| 61697 | ADAPTER BIT 1/4" - 1/2" L: 72 MM FOR IMPACT SOCKETS | 1 | |
| 616577 | WEAR GAUGE REFUEL RECEPTACLE ADAPTER | 1 | |
| 620-882-761-0 | Cable, Extension for receptacle connector CL111 | 1 | |
| 620049 | ADAPTOR (TO CONNECT THE CABLE TO THE RACK (RA TRANSCEIVER | 1 | |
| 620134 | SIZE 5 PIN COAXIAL CONTACT WITH SMA ADAPTER | 1 | |
| 62100-2501 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | 1 | |
| 62100-2502 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | 1 | |
| 62100-2601 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | 1 | |
| 62100-2602 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | 1 | |
| 62100-5900 | Vertical Receptacle Power Terminal Removal Tool | 1 | |
| 62100-6300 | LPH Vertical Receptacle Power Terminal Removal Tool | 1 | |
| 62100-6400 | Plug and Receptacle Housing Removal Tool | 1 | |
| 62100-6500 | Receptacle Power Terminal Removal Tool | 1 | |
| 62100-6600 | Receptacle Power Terminal Removal Tool | 1 | |
| 62100-7850 | Removal Tool for Ten60™ Vertical Signal Receptacle | 1 | |
| 62100-8200 | Removal Tool for 6-Pair Vertical Power Header and Receptacle | 1 | |
| 622-6104-001 | INTERFACE ADAPTER | 1 | |
| 62201-8604 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 5-Column | 1 | |
| 62201-8605 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 6-Column | 1 | |
| 62201-8606 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 10-Column | 1 | |
| 62201-8610 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 4-Column | 1 | |
| 62201-8611 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 6-Column | 1 | |
| 62201-8612 | Press-In Tool for Right Angle Receptacle and Header 7-Row, 10-Column | 1 | |
| 62201-8618 | Press-In Tool for Right Angle Receptacle and Header 11-Row, 8-Column | 1 | |
| 62201-8623 | Press-In Tool for Right Angle Receptacle 15-Row, 9-Column | 1 | |
| 62201-8624 | Press-In Tool for Right Angle Receptacle 15-Row, 10-Column | 1 | |
| 62201-8627 | Press-in Tool for Right Angle Power Receptacle and Header for 7-Row | 1 | |
| 62201-8628 | Press-in Tool for Right Angle Power Receptacle and Header for 11-Row | 1 | |
| 62201-8630 | Press-in Tool for Vertical Power Receptacle for 7-Row | 1 | |
| 62201-8631 | Press-in Tool for Vertical Power Receptacle for 11-Row | 1 | |
| 62201-8632 | Press-in Tool for Vertical Power Receptacle for 15-Row | 1 | |
| 62201-8633 | Support Tool for Vertical Power Module for 7-Row Receptacle | 1 | |
| 62201-8634 | Support Tool for Vertical Power Module for 11-Row Receptacle | 1 | |
| 62201-8635 | Support Tool for Vertical Power Module for 15-Row Receptacle | 1 | |
| 62201-8636 | Support Tool for Right Angle Power Module for 7-Row Receptacle | 1 | |
| 62201-8637 | Support Tool for Right Angle Power Module for 11-Row Receptacle | 1 | |
| 62201-8638 | Support Tool for Right Angle Power Module for 15-Row Receptacle | 1 | |
| 62201-8670 | Press In Tool for Vertical Receptacle | 1 | |
| 62201-8671 | Vertical Receptacle Press-In Tool | 1 | |
| 62201-8672 | Vertical Receptacle Press-In Tool | 1 | |
| 62201-8673 | Plug and Receptacle Housing Press-In Tool for Plug and Receptacle | 1 | |
| 62202-2080 | Single Wafer Removal Tool, Daughter Card Receptacle | 1 | |
| 62202-2083 | Single Wafer Removal Tool for Daughter Card Receptacle | 1 | |
| 62202-2086 | Single Wafer Removal Tool for RAM Card Receptacle | 1 | |
| 62202-3200 | Receptacle Right Angle, 144 Circuits, Upper Housing Extractor Kit | 1 | |
| 62202-3300 | Receptacle Right Angle, 108 Circuits, Upper Housing Extractor Kit | 1 | |
| 62202-3400 | Right Angle Receptacle Wafer Extractor Tool for 75019 Series | 1 | |
| 628000 | HANDHELD BLACK LIGHT (EV6000) – P/N: 628000 - TYPE G ADAPTER - MUST HAVE AN AC PLUG, | 2 | |
| 63023-101 | ADAPTER VACUUM | 1 | |
| 63023-103 | ADAPTER, VACUUM | 1 | |
| 63024-101 | ADAPTER, VACUUM | 1 | |
| 636-3000-28GSE | TR ACTUATOR PTIMARY LOCK PIN | 8 | |
| 63801-8901 | Crimp Adapter For DIN style dies In Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8902 | Crimp Adapter for 35mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8903 | Crimp Adapter for 22mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63811-9700 | Hand Crimp Tool for CP 2.8 Receptacle 14-16 AWG Type TXL Wire and>1.00-2.00mm² Type ID & ID Wire with 2.80mm, CMC Wire Seal Receptacle | 1 | |
| 63811-9800 | Hand Crimp Tool for CP 2.8 Receptacle for 2.50-3.00mm Type ID and IR Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63811-9900 | Hand Crimp Tool for CP 2.8 Receptacle 12-10 AWG Type TXL Wire and>3.00-5.00mm² Type ID & ID Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63813-3600 | Extractor Tool for Crimp Terminals for PT Bulb Socket 0.5-0.85mm² AWG and 2.00mm Bulb-Socket Earth Terminal | 1 | |
| 63813-3800 | Extractor Tool for Unsealed Receptacle Connectors | 1 | |
| 63813-4500 | Extraction Tool for CPX280 Receptacle Crimp Terminal | 1 | |
| 63813-4800 | Extractor Tool for NSCC 1.50mm Receptacle Terminals | 1 | |
| 63813-4900 | Extractor Tool for NSCC 1.50mm Receptacle Terminals, with Flex Versions | 1 | |
| 63813-5100 | Extraction Tool for NSCC 1.50mm Receptacle Terminals | 1 | |
| 63813-5200 | Extractor Tool for BIR 1.50mm Receptacle Terminals | 1 | |
| 63813-5600 | Extractor Tool for MP-Lock™ Quick Disconnect Receptacle Terminals | 1 | |
| 63813-7600 | Extractor Tool for NSCC Receptacle Crimp Terminals | 1 | |
| 63813-7800 | Extractor Tool for BIR 1.50mm Receptacle Terminals | 1 | |
| 63813-7900 | Extractor Tool for CSP and VDL5 Receptacle Crimp Terminals | 1 | |
| 63813-8200 | Extractor Tool for CMX Receptacle Connector | 1 | |
| 63813-8300 | Extractor Tool for MOX, 0.63mm Receptacle Crimp Terminals | 1 | |
| 63813-8400 | Extractor Tool for MOX, 0.63mm Receptacle Crimp Terminals | 1 | |
| 63813-8500 | Extractor Tool for MOX, 0.63mm Receptacle Crimp Terminals | 1 | |
| 63813-9400 | Secondary Lock Removal Tool for 35 Circuit Hybrid Receptacle Housing | 1 | |
| 63813-9500 | Extractor Tool for MOX, 0.63mm Receptacle Crimp Terminals | 1 | |
| 63813-9900 | Extractor Tool for CMX Receptacle Connector | 1 | |
| 63819-3400 | Hand Crimp Tool for CP 2.8 Receptacle 18-20 AWG Type TXL Wire and 0.50-0.75mm² Type ID & ID Wire with 2.80mm, CMC Wire Seal Receptacle | 1 | |
| 63819-3500 | Hand Crimp Tool for CP 2.8 Receptacle 1.00mm Type ID & ID Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63819-3700 | Hand Crimp Tool for CTX64 Receptacle Terminal, 0.22, 0.30, 0.35mm² and 22 AWG | 1 | |
| 63819-3800 | Hand Crimp Tool for CTX64 Receptacle Terminal, 0.50, 0.75, 0.85mm² and 20 AWG | 2 | |
| 63819-3900 | Hand Crimp Tool for CTX 1.50mm Receptacle Terminal, 0.30, 0.35, and 0.50mm² Wires | 1 | |
| 63819-4100 | Hand Crimp Tool for CTX 1.50mm Receptacle Terminal, 1.25, 1.50, and 2.00mm² | 1 | |
| 63819-5200 | Hand Crimp Tool for 2.28mm Slip-On Receptacle | 1 | |
| 63819-7300 | Hand Crimp Tool for 6.35mm Tab Slip-On Receptacle Terminals | 1 | |
| 63819-8000 | Hand Crimp Tool for CTX280 Receptacle Terminals | 1 | |
| 63819-8100 | Hand Crimp Tool for CTX280 Receptacle Terminals | 1 | |
| 63819-8200 | Hand Crimp Tool for CTX280 Receptacle Terminals | 1 | |
| 63819-8300 | Hand Crimp Tool for CTX280 Receptacle Terminals | 1 | |
| 63819-8600 | Hand Crimp Tool for NSCC 1.5 Receptacle Terminals | 1 | |
| 63819-8700 | Hand Crimp Tool for NSCC 1.5 Receptacle Terminals | 1 | |
| 63819-9600 | Hand Crimp Tool For Projector Lamp Plug and Receptacle Terminal | 1 | |
| 63823-0200 | Hand Crimp Tool for Receptacle Terminal Unsealed | 1 | |
| 63823-0300 | Hand Crimp Tool for Receptacle Terminal Unsealed | 1 | |
| 63823-0400 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal | 1 | |
| 63823-0500 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal. | 1 | |
| 63823-0600 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal. | 1 | |
| 63823-0700 | Hand Crimp Tool for SCC Sealed Receptacle Terminal | 1 | |
| 63823-0800 | Hand Crimp Tool for SCC Sealed Receptacle Terminal | 1 | |
| 63823-1000 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal | 1 | |
| 63823-1500 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal | 1 | |
| 63823-1600 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal. | 1 | |
| 63823-1700 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal | 1 | |
| 63823-2100 | Hand Crimp Tool for CTX280 SWS Receptacle Terminals | 1 | |
| 63823-2400 | Crimp Hand Tool for CTX280 SWS Receptacle Terminals | 1 | |
| 63823-3700 | Hand Crimp Tool for ISO (M3) Receptacle Terminals | 1 | |
| 63823-4200 | Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals | 1 | |
| 63823-4270 | Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals | 1 | |
| 63823-4500 | Hand Crimp Tool For CTX150 SWS Receptacle Terminals | 1 | |
| 63823-4600 | Hand Crimp Tool For CTX150 SWS Receptacle Terminals | 1 | |
| 63823-4700 | Hand Crimp Tool For CTX150 SWS Receptacle Terminals | 1 | |
| 63823-8500 | Hand Crimp Tool: for 2.79mm Slip-On Quick Disconnect Receptacle | 1 | |
| 63823-8900 | 1.0 Receptacle Crimp Terminals – AVS wire | 1 | |
| 63823-9000 | Hand Crimp Tool For SATA Power Cable Crimp Receptacles | 1 | |
| 63823-9100 | Hand Crimp Tool for 36P Robot Connector Plug and Receptacle Terminals | 1 | |
| 63823-9900 | Hand Crimp Tool For SATA Power Cable Crimp Receptacles | 1 | |
| 63824-0100 | Extractor Tool for CMX Receptacle Connector | 1 | |
| 63824-1200 | Unlocking Tool for CMC and CMX Receptacle Connector | 1 | |
| 63824-1300 | Extractor Tool for CTX280 Receptacle Crimp Terminal | 1 | |
| 63824-1800 | Low Cost Extractor Tool for CTX280 Receptacle Crimp Terminal | 1 | |
| 63824-2400 | Extractor Tool for CSP Receptacle Crimp Terminals | 1 | |
| 63824-2600 | Extractor Tool for CTX150 Receptacle Crimp Terminal | 1 | |
| 63824-3300 | Extractor Tool for CMX Receptacle Connector | 1 | |
| 63824-3400 | Extractor Tool for CMX Receptacle Connector | 1 | |
| 63824-3600 | Imperium Extractor Tool for Receptacle Terminal-Power Contact, HVIL Housing | 1 | |
| 63824-3900 | Unlocking Tool for CMX Receptacle Crimp Terminal | 1 | |
| 63824-4000 | Unlocking Tool for CMX Receptacle Crimp Terminal | 1 | |
| 63824-4800 | Extractor Tool for CTX64 Receptacle Crimp Terminal | 1 | |
| 63825-2100 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-2200 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-2275 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-3200 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-3400 | Hand Crimp Tool for Solar Shingle Receptacle Terminals | 1 | |
| 63825-5700 | Hand Tool for CSP 6.3 Receptacle Terminal | 1 | |
| 63825-5800 | Hand Crimp Tool for CSP 6.3 Receptacle Terminal | 1 | |
| 63825-5900 | Hand Tool for CSP 6.3 Receptacle Terminal | 1 | |
| 63825-6000 | Hand Crimp Tool for CSP 6.3 Receptacle Terminal | 1 | |
| 63825-6100 | Hand Crimp Tool for CSP 6.3 Receptacle Terminal | 1 | |
| 63825-6200 | Hand Tool for CSP 6.3 Receptacle Terminal | 1 | |
| 63825-7400 | Tool Kit for 250 Slip-in Receptacle Terminals | 1 | |
| 63825-7475 | Hand Crimp Tool for 250 Slip-in Receptacle Terminals | 1 | |
| 63825-7500 | Hand Tool for 250 Slip-in Receptacle Terminals | 1 | |
| 63825-7600 | Hand Crimp Tool for 2.28mm (.090") Sealed Receptacle Terminals | 1 | |
| 63825-7700 | Hand Crimp Tool for 2.28mm (.090”) Sealed Receptacle Terminal | 1 | |
| 63825-9500 | Hand Crimp Tool .090" (23mm) Slip-on Receptacle Terminal | 1 | |
| 63827-0100 | Hand Crimp Tool For 3.30mm (.130") Pitch Crimp Receptacle Terminals | 1 | |
| 63827-0600 | Hand Crimp Tool for .187 Receptacle Terminal | 1 | |
| 63827-2100 | Hand Tool for .250 Slip-in Receptacle Terminals for 14-18 AWG Wire. | 1 | |
| 63827-2200 | Hand Crimp Tool for 3.96mm (0.156") Diameter Pin Receptacle Terminals | 1 | |
| 63827-5100 | 1.0 Receptacle Crimp Terminals – CAV wire Doc | 1 | |
| 63827-5200 | 1.0 Receptacle Crimp Terminals – CAVUS wire | 1 | |
| 63827-6400 | Hand Crimp Tool for 2.00mm W/B Receptacle Terminals | 1 | |
| 6404 | VIBREX TRACKER ADAPTER KIT | 1 | |
| 642S | JACK, HYDRAULIC USED WITH JACK ADAPTOR KIT | 6 | |
| 64882-101 | VACUUM ADAPTE | 1 | |
| 64886-103 | ADAPTER, VACUUM | 1 | |
| 64980 | ADAPTER, TEST CLUB - ALL ENGINES WITH AS-127 TYPE 2 PROPELLER FLANGE WITH BUSHINGS FOR 7/16 IN. PROPELLER ATTACHING BOLTS | 1 | |
| 650HS058M11 | Dummy Receptacle | 1 | |
| 651803-011 | ACCEPTANCE TEST SOFTWARE - GE AVIATION | 1 | |
| 652-043 | Replacement Jaws for Cherry® Pulling Heads (Description: Jaw Set) (Add to cart: Add To Cart) | 2 | |
| 65448 | ADAPTER 1.1/2" (F) - 1" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 65449 | ADAPTER 1.1/2" (F) - 2.1/2" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 65478 | ADAPTER 2.1/2" (F) - 1.1/2" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 65Y18795-4 | PRESSURE WQUIPMENT, AR RECEPTACLE MANIFOLD | 1 | |
| 660-022M08N | COVER - ELECTRICAL RECEPTACLE | 1 | |
| 660-022M12N | COVER - ELECTRICAL RECEPTACLE | 1 | |
| 660-10P | PHENIX 660-10P AC VACUUM INTERRUPTER TEST SET | 1 | |
| 66051 | BACKFLUSH ADAPTER | 1 | |
| 6645000002-001 | COMPUTER, INTERFACE ADAPTER, MAINTENANCE | 3 | |
| 66514-101 | VACUUM ADAPTER | 1 | |
| 67-149-5 | Micro Drill Chuck (Accepts drill sizes: #60 to #80 Wire Gauge) (Add to cart: Add To Cart) | 1 | |
| 670-016 | CASTER WHEEL FOR JACK DPTR040C1250004770 | 1 | |
| 67086-101 | VACUUM ADAPTER | 1 | |
| 68698 | ADAPTER 1" (F) - 1.1/2" (M) FOR IMPACT SOCKET WRENCHES | 1 | |
| 6723040 | FACE PLATE ADAPTER | 1 | |
| 6795633 | ADAPTER GAS PRODUCER TURBINE ASSEMBLY TO TURBINE ASSEMBLY FIXTURE ATTACHING | 2 | |
| 6796371 | PROP BRAKE FACING RIVET COUNTERSINK DEPTH GAUGE | 1 | |
| 6796372 | PROP BRAKE FACING RIVET HEAD DEPTH GAUGE | 1 | |
| 6796377 | PROP BRAKE FACING GROOVE DEPTH GAUGE | 1 | |
| 6796694 | ADAPTER ASSEMBLY, INTERFACE DEVIC | 2 | |
| 6796810 | ADAPTER ATTACHING COMBUSTION CHAMBER CASING LIFT | 3 | |
| 6796820 | ADAPTER - ATTACHING | 1 | |
| 6796965 | ADAPTER - ATTACHING | 2 | |
| 6799637 | TURB. WHEEL&SPACER PRESS ADAPTER | 1 | |
| 6799788 | ADAPTER MOUNTING BRACKET | 1 | |
| 68506-510-1 | STAND TO REMOVE RECEPTACLE (1-200) FOR INDICATORS PN 64050-866-1 AND PN 64050-868-1 | 1 | |
| 68506-513-2 | SPECIAL TOOL (TO HOLD THE RECEPTACLE, ST 0001) | 1 | |
| 6872473 | Bracket ADAPTER- MOUNTING | 1 | |
| 6877020M2 | FINAL ACCEPTANCE GAGE | 1 | |
| 6893376 | ADAPTER - ATTACHING, GAS PRODUCER | 2 | |
| 6897008 | FACE PLATE ADAPTER | 1 | |
| 6897142 | DEPTH GAGE DETERMINES SECONDARY BODY MACHINING DIMENSION. | 1 | |
| 6897143 | DEPTH GAGE DETERMINES SECONDARY BODY MACHINING DIMENSION. | 1 | |
| 68D010003-1003 | AXLE JACK ADAPTER | 1 | |
| 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT | 1 | |
| 68D050170-1001 | HORIZONTAL STAB ACTUATOR ADAPTER | 1 | |
| 69-687-22 | AC/DC ADAPTER 6V | 1 | |
| 69ME65B00713 | ACCESSORY ADAPTER - HOIST SYSTEM, JT9D-7 ENGINE | 3 | |
| 6F0830G00131 | JACKING BRACKET, HELICOPTER WEIGHING | 1 | |
| 6MIT65B01201-1 | WRENCH ADAPTER - NUT, LOWER DRAG BRACE, WING LANDING GEAR | 3 | |
| 6MIT65B01231-1 | ADAPTER - TORQUE, BLG BEARING RETAINER NUT (USED ON ALL BLG; ALSO 747SP WLG DRAG BRACE) | 4 | |
| 6MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 7-16701A | ADAPTOR AC 9V .18A29261 | 1 | |
| 7-562181100-603 | ADAPTER, APACHE MAGAZINE AND TANK TRANSFER SYSTEM | 1 | |
| 7002-3-101 | RECEPTACLE | 1 | |
| 7002-37 | RECEPTACLE | 1 | |
| 7002-5-20 | RECEPTACLE | 1 | |
| 7002-5-20G | RECEPTACLE | 1 | |
| 7002-5-30 | RECEPTACLE | 1 | |
| 701B18 | Replacement Jaws for Cherry® Pulling Heads (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) | 6 | |
| 80 | Fixed 2 Pt Machinist Scriber (Overall length: 6-7/16" (214 mm)) (Add to cart: Add To Cart) | 5 | |
| 7653 | ADAPTER IMPACT 3/4 | 1 | |
| 7761 | INTERFACE ADAPTOR 9V OUTPUT | 1 | |
| 70121 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) | 1 | |
| 70122 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 3-3/8") (Depth of cut: 5/8") (Add to cart | 1 | |
| 70123 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 3-3/8") (Depth of cut: 5/8") (Add to cart | 1 | |
| 70245 | Irwin® Spiral Flute Screw Extractor & Drill Bit Set (Description: Complete Set) (Add to cart: Add To Cart) | 1 | |
| 70252 | Irwin® Screw Extractor Sets (Description: 4 Piece Set) (Extractors included: #2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) | 1 | |
| 70254 | Irwin® Screw Extractor Sets (Description: 4 Piece Set) (Extractors included: #2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (Description: 5 Piece Set) (Extractors included: #1, 2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) | 1 | |
| 70256 | Irwin® Screw Extractor Sets (Description: 4 Piece Set) (Extractors included: #2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (Description: 5 Piece Set) (Extractors included: #1, 2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (D | 1 | |
| 70258 | Irwin® Screw Extractor Sets (Description: 4 Piece Set) (Extractors included: #2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (Description: 5 Piece Set) (Extractors included: #1, 2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (D | 1 | |
| 70260 | Irwin® Screw Extractor Sets (Description: 4 Piece Set) (Extractors included: #2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (Description: 5 Piece Set) (Extractors included: #1, 2, 3, 4 & 5) (Type: Spiral Flute) (Add to cart: Add To Cart) (D | 1 | |
| 70284-1 | EXT POWER RECEPTACLE PIN | 1 | |
| 703A91-4105-02 | JACK ADAPTER PAD MLG | 1 | |
| 703A97-7200-00 | MAINTENANCE BOX,AIR CONDITIONING – AIRBUS (WE CAN ACCEPT, BUT NOT NEW) | 1 | |
| 704-2383-001 | ADAPTER CABLE - ACARS MU | 1 | |
| 704C1001 | ADAPTERS, JACK | 1 | |
| 70782 | Specialty Sealant Scrapers (Description: Hardened Sealant Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3/4" & 1/4") (Add to cart: Add To Cart) (Description: Hardened Sealant & Seat Track Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3 | 1 | |
| 70784 | Specialty Sealant Scrapers (Description: Hardened Sealant Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3/4" & 1/4") (Add to cart: Add To Cart) (Description: Hardened Sealant & Seat Track Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3 | 2 | |
| 70786 | Specialty Sealant Scrapers (Description: Hardened Sealant Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3/4" & 1/4") (Add to cart: Add To Cart) (Description: Hardened Sealant & Seat Track Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3 | 1 | |
| 70788 | Specialty Sealant Scrapers (Description: Hardened Sealant Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3/4" & 1/4") (Add to cart: Add To Cart) (Description: Hardened Sealant & Seat Track Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3 | 1 | |
| 70790 | Specialty Sealant Scrapers (Description: Hardened Sealant Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3/4" & 1/4") (Add to cart: Add To Cart) (Description: Hardened Sealant & Seat Track Scraper) (Size/diameter: 9"L (3/16" thick)) (Tip width: 3 | 1 | |
| 7110561 | MICROMETER, OPTICAL (ACCURACY /-.001 INCH) FIBERSCOPE - FLEXIBLE BORESCOPE MICROMETER - DEPTH, 0-2 IN (0-51MM), READABLE TO 1/1000 IN (0.025 MM) | 1 | |
| 712C1001 | ADAPTER, WING/INBD, TRIPOD JACK / COLUMBUS | 1 | |
| 714A | FORWARD BODY JACK ADAPT 714A (WITHOUT LEG EXT.} AND FT BODY JACK 714A (WITH 36" LEG EXT.) | 5 | |
| 72-C05212 | MANUAL SEALANT GUNS ( DESCRIPTION: SEALANT GUN - 12 OZ CARTRIDGE CAPACITY ) | 1 | |
| 72-C05213 | MANUAL SEALANT GUNS ( DESCRIPTION: SEALANT GUN - 6 OZ CARTRIDGE CAPACITY ) | 1 | |
| 72-C05214 | MANUAL SEALANT GUNS ( DESCRIPTION: SEALANT GUN - 2.5 OZ CARTRIDGE CAPACITY ) | 1 | |
| 72-C05215 | DISPOSABLE PLASTIC CARTRIDGES, PLUNGERS & CAPS ( DESCRIPTION: FLANGE END CAP (STOPS PLUNGER BACKOUT) ) | 1 | |
| 72-C27127 | Air Operated Sealant Gun Kits (Description: 2.5 Ounce Capacity Kit) (Add to cart: Add To Cart) | 1 | |
| 72-C27128 | Air Operated Sealant Gun Kits (Description: 2.5 Ounce Capacity Kit) (Add to cart: Add To Cart) (Description: 6 Ounce Capacity Kit) (Add to cart: Add To Cart) | 1 | |
| 72-C27129 | Air Operated Sealant Gun Kits (Description: 2.5 Ounce Capacity Kit) (Add to cart: Add To Cart) (Description: 6 Ounce Capacity Kit) (Add to cart: Add To Cart) (Description: 12 Ounce Capacity Kit) (Add to cart: Add To Cart) | 1 | |
| 7205R | Jack − Fwd Fuselage (Optional) | 1 | |
| 7212 S1 | Jack − Main Wing (Optional) | 1 | |
| 7212S1 | JACK − MAIN WING (OPTIONAL) | 1 | |
| 724-PSEU | 724-PSEU - ADAPTER, 100-240 VAC IN, 24VDC 0.25A OUT, UK & EURO PLUGS | 2 | |
| 728B4 | Replacement Jaws for Cherry® Pulling Heads (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) | 2 | |
| 730N/10 | TORQUE WRENCH SERVICE MANOSKOP® WITH RECEPTACLE FOR INSERT TOOLS NO. 730N/10 20-100 NM 15-75 FT.LB 50181010 | 1 | |
| 733A | JACK FORWARD FUSELAGE (ADAPTERS AND JACK PADS HAVE TO BE INCLUDED) 40T | 2 | |
| 73740 | IMPACT ADAPTER 1.1/2" (F) -1" (M) NON SPARKING Cu-Be | 1 | |
| 73743 | IMPACT ADAPTER 1.1/2" (F) - 1" (M) NON SPARKING Al-Bron | 1 | |
| 744C76 | Replacement Jaws for Cherry® Pulling Heads (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) | 3 | |
| 747FLYAWAY KIT | ADAPTER,NLG JACK | 1 | |
| 74818 | ADAPTER 767 JACK PRIMARY/TAIL | 1 | |
| 753A14A | Replacement Jaw Followers for Cherry® Pulling Heads (Description: Jaw Follower) (Add to cart: Add To Cart) | 5 | |
| 75416-T003 | Adapter Torque Wrench (Tip) Feed Back Spring | 1 | |
| 75D68000-001 | AFT JACK ADAPTER SET | 1 | |
| 76492 | IMPACT ADAPTER 3/4" (F) - 1/2" (M) NON SPARKING Al-Bron | 1 | |
| 76495 | IMPACT ADAPTER 3/4" (F) - 1/2" (M) NON SPARKING Cu-Be | 1 | |
| 767-77-001 | ADAPTOR, JACKING PAD | 1 | |
| 76711 | IMPACT ADAPTER 1/2" (F) - 3/4" (M) NON SPARKING Cu-Be | 1 | |
| 76712 | IMPACT ADAPTER 1/2" (F) - 3/4" (M) NON SPARKING Al-Bron | 1 | |
| 76713 | IMPACT ADAPTER 3/4" (F) - 1" (M) NON SPARKING Cu-Be | 1 | |
| 76714 | IMPACT ADAPTER 3/4" (F) - 1" (M) NON SPARKING Al-Bron | 1 | |
| 76715 | IMPACT ADAPTER 1" (F) - 3/4" (M) NON SPARKING Cu-Be | 1 | |
| 76716 | IMPACT ADAPTER 1" (F) - 3/4" (M) NON SPARKING Al-Bron | 1 | |
| 782-010 | REPLACEMENT JAWS FOR CHERRY® PULLING HEADS ( DESCRIPTION: JAW SET ) | 2 | |
| 79386 | JACK ADAPTER | 1 | |
| 79661 | PTGR100 CLAMP NUT - BLACK | 1 | |
| 735310 | ADAPTOR TO INSTALL TEST SQUARE BRACKET | 1 | |
| 770303 | Charger for PTT, LTT & EZ-TORQ II (100-240 VAC & 10 VDC) | 1 | |
| 7327427 | TOOL, WRENCH ASSY, RECEPTACLE MOUNTING | 1 | |
| 7965769 | ACCEPT. TEST PROC. | 1 | |
| 7C2216G01 | Adapter,strongback | 1 | |
| 7C2218 | ADAPTER SET - VSV ACTUATOR | 1 | |
| 800-0630 | USB-429 INTERFACE BOX ADAPTER | 6 | |
| 8000630 | USB429 INTERFACE BOX ADAPTER | 6 | |
| 80044-4 | AC/DC POWER ADAPTER(FOR PMAT 2000) | 1 | |
| 80045-3 | PMAT 2000 to PDL MSD with AC Adapter | 1 | |
| 80060-5 | JACKING ADAPTER | 1 | |
| 80061-5 | PMAT 2000 to PMAT NT with in-line AC Adapter | 1 | |
| 800???0630 | USB???429 INTERFACE BOX ADAPTER | 6 | |
| 800−0630 | USB−429 Interface Box Adapter | 6 | |
| 8017-010 | JACK - MAIN WING (OPTIONAL) | 1 | |
| 8017−010 | Jack − Main Wing (Optional) | 1 | |
| 801817 | ADAPTER JACK AFT | 1 | |
| 802-0130 | PTI INTERFACE CABLE | 1 | |
| 802-0137 | Lockheed L-209 Portable Rack Adapter | 1 | |
| 802-0146 | PTI INTERFACE CABLE | 1 | |
| 802-0152 | PTI INTERFACE CABLE | 1 | |
| 802-0162 | Plessey PV-1584 Portable Rack Adapter | 1 | |
| 802-0163 | INTERFACE CABLE RSU B717 R/T PTI | 1 | |
| 802-0320 | INTERFACE KIT (ADAPTER PLS SOFTW | 2 | |
| 8033-3000 | ACU-810HF AMPCOUPTLER | 1 | |
| 8042C | CONNECTING ROD FRABRICAR DE ACUERDO A BUJES BUSHING INSTALLATION AND REMOVAL TOOL ADAPTER KIT | 1 | |
| 805-6605 | SYLVAC DIGITAL DEPTH GAGE | 1 | |
| 808-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 808-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 808-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 808-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 810-2007-KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 9 | |
| 810-2007/KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 9 | |
| 810-325 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 22 | |
| 81012622-01 | JACK ADAPTER NLG | 1 | |
| 812-2240 | SYLVAC ADDITIONAL BASE FOR DIGITAL DEPTH GAGE | 1 | |
| 812-2241 | SYLVAC ADDITIONAL BASE FOR DIGITAL DEPTH GAGE | 1 | |
| 816 | ADAPTER-NOSE JACKING A330 | 1 | |
| 82-100-0032 | PROPTRACTOR PROPELLER | 1 | |
| 82559 | 82559;AC27002 Attenuator;20 dB/50 W;Adapter N-F to BNC-F;Adapter N-M to TNC-M | 1 | |
| 82560 | 82560;AC27003 Attenuator;20 dB/150 W;Adapter N-F to BNC-F;Adapter N-M to BNC-F | 1 | |
| 828-3169-001 | SYSTEM PROCESSOR BOARDSITE INTERFACE ADAPTOR | 1 | |
| 831413 | ADAPTER, BALANCE MACHINE | 1 | |
| 832-6-C | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 832-6-F | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 832-6-M | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 832-9 | Sanding Drum & Sleeve Kits (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1") (Type: Coarse) (Add to cart: Add To Cart) (Description: General Purpose 6 PC Sleeve Packs - For Kit SDK-15) (Diameter range: 3/4" x 1" | 1 | |
| 83347 | 83347;35XXOPT08 Tracking Generator | 1 | |
| 83357 | 83357;390XOPT061 Tracking Generator | 1 | |
| 83371 | 83371;390XOPT214 Adjacent Channel Broadcast Message; Requires Opt201 | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834012-1 | BACKLASH ADAPTER | 1 | |
| 8400 | MICROMETER, OPTICAL (ACCURACY +/-.001 INCH) | 6 | |
| 83402 | 83402;4000OPT1 ELT 121.5/243 MHz Beacon AND | 1 | |
| 83407 | 83407;45TSOPT4 DME/TACAN | 1 | |
| 834597-1 | IGV ACTUATOR RETURN TEST ADAPTOR | 1 | |
| 835-242-S5 | SOFTWARE SPREADSHEET FOR FINDING THE CORRECTED FAN BLADE TIP CLEARANCE MACHINING DEPTH OF CUT - OPTIONAL | 1 | |
| 835673-1 | BACKLASH CHECK FIXTURE ADAPTER | 1 | |
| 8400-91 | BASE, ACRYLIC V-BLOCK, 8400 OPTICAL MIC | 2 | |
| 8400K | MICROMETER, OPTICAL (MIN DEPTH .02 INCH AND ACCURACY /-.0005 INCH) | 7 | |
| 8400PCK | MICROMETER, OPTICAL (MIN DEPTH .02 INCH AND ACCURACY /-.0005 INCH) | 1 | |
| 842-652012-1 | PRESSURE EQUIPMENT, AR RECEPTACLE MANIFOLD | 1 | |
| 850-BB100 | (OPTIONAL ITEM) USER I/O BREAKOUT BOARD AND CABLE, FOR STB100 BEACON TEST BENCH | 1 | |
| 850-PRB100 | (OPTIONAL ITEM) TEMPERATURE PROBE, FOR STB100 BEACON TEST BENCH | 1 | |
| 856A 2773G01 | SPACERS/ SUPPORT LPT ROTOR &CASE | 10 | |
| 856A1017 | PULLER, IMPACT - HPT SHROUD REMOVAL (IMPACT PULLER) | 1 | |
| 856A1017G03 | PULLER, IMPACT -HPTR SHROUD REMOVAL | 5 | |
| 856A1017G04 | IMPACT HPT SHROUD.. | 8 | |
| 856A1084P59 | ACTUATOR PUMP ADAPTER SET | 8 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1130P08 | ADAPTER JACK SCREW | 9 | |
| 856A1130P11 | ADAPTER JACKSCREW | 5 | |
| 856A1130P12 | ADAPTER JACKSCREW | 10 | |
| 856A1314 | BRACKET SET LPT AFT MOUNT | 2 | |
| 856A1314 G01 | Bracket Set Support ‐ LPT Aft Mount | 16 | |
| 856A1314G01 | BRACKET SET LPT AFT MOUNT | 16 | |
| 856A1314G04 | BRACKET SET LPT AFT | 2 | |
| 856A1369 | FIXTURE, ADAPTER LINI- GAGE- DATA ACQUISITION SYST | 1 | |
| 856A1369 G04 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM G01 | 5 | |
| 856A1369G01 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G02 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G03 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G04 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 5 | |
| 856A1382G06 | PROTACTOR,STUD-HPT SHROUD | 8 | |
| 856A1471 | LPT SUPPORT BRACKET SET | 2 | |
| 856A1471G02 | LPT BRACKET | 15 | |
| 856A1481G02 | ELETRONIC PROTACTOR ( OPTIONAL ) | 7 | |
| 856A1611G01 | BRACKET SET, SUPPORT-LPT FWD FLGE | 6 | |
| 856A1616G02 | CFM PDL (INTERFACE) ADAPTER CABLE | 17 | |
| 856A1703G01 | BRACKET SET, SUPPORT - LPT (BRACKET SET) | 3 | |
| 856A1800 | BRACKET SET, SUPPORT - LPT (BRACKET SET) | 1 | |
| 856A1800 G02 | Bracket set Support -LPT | 18 | |
| 856A1800G01 | BRACKET SET, SUPPORT - LPT (BRACKET SET) | 6 | |
| 856A1800G02 | BRACKET SET, SUPPORT LPT | 18 | |
| 856A1807G02 | FIXTURE, LIFT-HPT NOZZLE (DAC CONFIG | 2 | |
| 856A1817G01 | ADAPTER, TORQUE, HPTN SUPPORT BOLT DAC CONFIG 01 | 1 | |
| 856A1839G01 | FIXTURE, DISASSY-HPTR/HPCR (JACKSCREW) | 9 | |
| 856A2360G01 | FIXTURE, HOIST/HANDLING - LPT ROTOR/STATOR ASSEMBLY,(HANDLING FIXTURE)OBSELETE REPLACED BY 856A2359G02_C | 1 | |
| 856A2382G01 | FIXTURE, HANDLING AND TURN - LPT CASE (HANDLING AND TURN FIXTURE)OBSELETE REPLACED BY 856A2382G03_E | 1 | |
| 856A2383G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT ROTOR AND STATOR (ASSEMBLY/DISASSEMBLY FIXTURE)OBSELETE REPLACED BY 856A2383G03_F | 1 | |
| 856A2501 | VBV ACTUATOR WRENCH ADAPTER | 4 | |
| 856A2576 | SPACERS, SUPPORT LPTR | 1 | |
| 856A2576G01 | SPACERS SUPPT. | 2 | |
| 856A2668G02 | PULLER - ADAPTER(20 EACH) | 14 | |
| 856A2668P24 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P28 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P30 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P37 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P43 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2676G01 | CHECK FEELER GAGE - LPT (FEELER GAGE)OBSELETE REPLACED BY 856A2676G02 | 2 | |
| 856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
| 856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 2 | |
| 856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
| 856A2700G01 | Adaptor Puller Fan Blade Spacers | 13 | |
| 856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | 1 | |
| 856A2773 | SPACERS SUPPORT LPT ROTOR LPT CASE | 1 | |
| 856A2773 REV A | SPACERS SUPPORT LPT ROTOR LPT CASE | 1 | |
| 856A2773G01 | SPACERS SUPPORT LPT ROTOR CASE | 10 | |
| 856A3114 | WRENCH - CAPTIVE BOLTS,VBV BALLSCREW ACTUATOR (WRENCH) | 4 | |
| 856A3114G01 | WRENCH - CAPTIVE BOLTS,VBV BALLSCREW ACTUATOR (WRENCH) | 14 | |
| 856A3260 | PLUG EXTRACT LPT SHAFT COMPONENTS | 1 | |
| 856A3260 G01 | Plug Extraction ‐ Main Components LPT Shaft | 1 | |
| 856A3260G01 | PLUG, EXTRACTION-MAIN COMPONENTS LPT SHAFT | 1 | |
| 856A3260G02 | Extraction Plug - Main Components, LPT Shaft | 10 | |
| 856A3269G03 | LPT INNER RACE WRENCH | 9 | |
| 856A3318 P01 | RECEPTACLE CONNECTOR ASSEMBLY | 1 | |
| 856A3318P02 | RECEPTACLE CONNECTOR | 5 | |
| 856A3419G01 | Adapter，puller cover oil inlet adaptateur，extracteur | 2 | |
| 856A3419G02 | ADAPTER PULLER, OIL-INLET COVER LPT(TO EXTRACT THE OIL INLET COVER USING A SLIDE.) | 23 | |
| 856A3454 | TOOL SET, BALANCE RING AND CLAW EXTRACTOR - LPT SHAFT BALANCING | 1 | |
| 856A3454G03 | TOOL SET, BALANCE RING AND CLAW EXTRACTOR LPT SHAFT BALANCING | 2 | |
| 856A3499G01 | TORQUING/LOOSENING ADAPTER - N°1 BRG OUTER RACE | 1 | |
| 856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500 G01 | Adapter Puller ‐ Fan Blade Spacers | 17 | |
| 856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500G01 | ADAPTER, PULLER FAN BLADE SPACER | 17 | |
| 856A3629P01 | GAUGE INSPECTION-UNAACPTABLE SCALING | 1 | |
| 856A3629P02 | GAGE INSPECTION UNACCEPTABLE SEALING AREA | 11 | |
| 856A3707G05 | Adaptor, Puller Fan Blade Spacer | 11 | |
| 856A3707G06 | ADAPT PULLER FAN BLADE SPACER | 9 | |
| 856A3763G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS,STG 3 (FIXTURE)OBSELETE REPLACED BY 856A3763G02 THEN 856A3763G03 | 1 | |
| 856A3788G01 | TOOL SET, INSTALLATION - LPT OUTER STATIONARY AIR SEAL STAGE 2-3 (TOOL SET) OBSELETE REPLACED BY 856A3788G02 | 1 | |
| 856A3794G01 | RING, HOLDING 2EACH(TO HOLD THE STAGE 1 OUTER STATIONARY AIR SEAL AND SHROUD SUPPORT ASSEMBLY DURING TRANSPORTATION OF THE LPT) | 9 | |
| 856A3850G01 | SUPT ACCY DR MAJ MOD SO 88-70 | 1 | |
| 856A4003G01 | STAND, BACKFLUSH - HPT BLADES | 1 | |
| 856A4008 | SEAL, BACKFLUSH – HPT BLADE | 1 | |
| 856A4008G01 | SEAL, BACKFLUSH – HPT BLADE | 1 | |
| 856A4008P04 | SEAL, BACKFLUSH - HPT BLADE | 1 | |
| 856A4008P05 | SEAL, BACKFLUSH - HPT BLADE | 1 | |
| 856A4109G01 | RACK, ROTATING - CLEAN HPT BLADE | 1 | |
| 856A4234G03 | FIXTURE SET, MACHINING HPT ROTOR SHAFT - FRONT | 1 | |
| 856A4265 | FIXTURE, MACHINING - HPTR REARSHAFT | 1 | |
| 856A4265G01 | FIXT MACH HPT AFT SHAFT | 1 | |
| 856A5537G03 | FIXT MACH OUT STA AIR SEAL S-1 LPT | 1 | |
| 856A5564 | SPHERICAL RESURFACING SET - LPT END TUBE COUPLING | 1 | |
| 856A5564P01 | SPHERICAL RESURFACING SET - LPT END | 2 | |
| 856A5565 | CONICAL/COUPLE RESURFACING SET - LPT END TUBE COUPLING | 1 | |
| 856A5640G02 | MACHINING FIXTURE - LPT COOLING AIR | 1 | |
| 856A5682G01 | FIXT MACH FWD SHROUD FACES LPT | 1 | |
| 856A5795G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5795G02 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5796G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5797G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A6776G02 | Fixture checking machining outer stationary air seal lpt stg1 | 1 | |
| 856A6778G01 | Fixture checking machining outer stationary air seal lpt stg 2 | 1 | |
| 856A6780G01 | Fixture checking machining outer stationary air seal lpt stg3 | 1 | |
| 856A6782G01 | Fixture checking/machining outer stationary air seal lpt stg 4 | 1 | |
| 856A6784G01 | Fixture Machining-Inner Stationary Air Seal Lpt Stg 2 | 1 | |
| 856A6786G01 | Fixture Machining-Inner Stationary Air Seal Lpt Stg 3 | 1 | |
| 856A6788G01 | Fixture Machining-Inner Stationary Air Seal Lpt Stg 4 | 1 | |
| 856A6792G02 | FIXT MACH AFT SHROUD FACES LPT | 1 | |
| 856AI0I7 | IMPACT HPT SHROUD | 1 | |
| 856S2700 | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 856S2700 REV B | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 85J1028 - 001 | JACK ADAPTER NLG | 1 | |
| 85J1028-001 | JACK ADAPTER - NLG | 1 | |
| 865C25 | Replacement Jaws for Cherry® Pulling Heads (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) (Description: Jaw Set) (Add to cart: Add To Cart) (Description | 2 | |
| 88-01T | SPANNER, CEILING PANEL RECEPTACLE | 1 | |
| 8811B | JACK MAIN WING (BODY) (ADAPTERS AND JACK PADS HAVE TO BE INCLUDED) 120T | 1 | |
| 8817A | TOOLS/EQPT REFERENCE DESCRIPTION 45 TO 90 TON AXLE JACK TRANSPORTER | 1 | |
| 884EH | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 884EH-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| 886-002 | Replacement Jaw Followers for Cherry® Pulling Heads (Description: Jaw Follower) (Add to cart: Add To Cart) (Description: Jaw Follower) (Add to cart: Add To Cart) | 2 | |
| 8863 | JACK MAIN WING (BODY) (ADAPTERS AND JACK PADS HAVE TO BE INCLUDED) 120T | 2 | |
| 8864 | JACK FORWARD FUSELAGE (ADAPTERS AND JACK PADS HAVE TO BE INCLUDED) 40T | 1 | |
| 8918 | JACK AFT FUSELAGE (ADAPTERS AND JACK PADS HAVE TO BE INCLUDED) 60T | 1 | |
| 9061 | ADAPTER: STEM,VALVE (X10 PER PACK) | 4 | |
| 88657 | Henkel 97208 LOCTITE 10 ml Syringe Airline Adapter - Pack of 2 | 1 | |
| 88678 | Henkel 97245 LOCTITE 30 55 mL Syringe Airline Adapter - Pack of 2 | 3 | |
| 8C2168G02 | Tool kit,adapter-electronic protractor vsv | 1 | |
| 8C2173G01 | Tool Kit, Adapter - Electronic Protractor Igv | 1 | |
| 8C2236G01 | Adapter,strongback-core build stand | 1 | |
| 8C2443 | LPT STRONGBACK | 1 | |
| 8C2469G03 | Adapter set torque reaction lpt shaft to electronic | 1 | |
| 8C2469G04 | Adapter set torque reaction lpt shaft to electronic | 1 | |
| 8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | 1 | |
| 8C3166 | DOLLY - TRANSPORTATION / STORAGE - RESTRAIN LPT ROTOR - STRONGBACK | 1 | |
| 8C3463 | ADAPTER - EXTRACTION - AGBX - BRG - ETS - IDLER - VSCF | 1 | |
| 8C3463G01 | Adapter,extraction-agbx,brg ets idler vscf | 1 | |
| 8C3464 | ADAPTER - EXTRACTION - AGBX - BRG - ETS - HP - FP | 1 | |
| 8C3464G01 | Adapter,extraction-agbx,brg ets hp fp | 1 | |
| 8C3465 | ADAPTER - EXTRACTION - AGBX - BRG - IDG - LP | 1 | |
| 8C3466 | ADAPTER - EXTRACTION - AGBX - BRG - IDG - ATS | 1 | |
| 8C3466G01 | Adapter,extraction-agbx,brg idg ats | 1 | |
| 8C3467 | ADAPTER - EXTRACTION - AGBX - BRG - PMA | 1 | |
| 8C3565G01 | Adapter, Extraction - Tgbx, Roller Brg, Horizontal | 1 | |
| 8C3566G01 | Adapter Extraction-Igbx Roller Brg Vertical | 1 | |
| 8C3567G01 | Adapter Extraction-Igbx Roller Brg Vertical | 1 | |
| 8C3671G01 | Adapter Extraction-Igbx Roller Brg Vertical | 1 | |
| 8C3672G01 | Adapter,Extraction-Igbx,Ball Brg Vertical | 1 | |
| 8C3673G01 | Adapter,Extraction-Igbx,Ball Brg Vertical | 1 | |
| 8C3674G01 | Adapter, Extraction - Igbx, Seal, Horizontal | 1 | |
| 8C3675 | ADAPTER - EXTRACTION - IGBX - OIL DISTRIBUTOR - HORIZONTAL | 1 | |
| 8C3676 | ADAPTER - EXTRACTION - IGBX - ROLLER BRG - HORIZONTAL | 1 | |
| 8C3676G01 | Adapter,Extraction-Igbx Roller Brg, Horizontal | 1 | |
| 8C3677 | ADAPTER - EXTRACTION - IGBX - BALL BRG - HORIZONTAL | 1 | |
| 8C3677G01 | Adapter Extraction-Igbx Ball Brg Horizontal | 1 | |
| 8C3678 | ADAPTER - EXTRACTION - IGBX - BALL BRG - HORIZONTAL | 1 | |
| 8C3678G01 | Adapter Extraction-Igbx Ball Brg Horizontal | 1 | |
| 8G0830G00131 | JACKING BRACKET, HELICOPTER WEIGHING | 1 | |
| 90-PD6001-PD1 | Bowers Contact Point Adaptor for PD-6001 | 1 | |
| 90080100-001 | AAR RECEPTACLE TESTER | 2 | |
| 901-11800-3 | FAST TRACK OPTICAL TRACKER | 2 | |
| 902415704-V | TEST VACUUM ADAPTER | 1 | |
| 90252 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) | 1 | |
| 90253 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90254 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90255 | Digital Aircraft Cable Tensiometers (Description: Standard Preset: 1/16", 3/32",) (Description continued: 1/8" & 5/32") (Range: 20 to 250 lbs) (Resolution: 0.5 lbs) (Add to cart: Contact us to order) (Description: Standard Preset: 3/32", 1/8" &) (Descript | 1 | |
| 90455 | Deluxe Visitor Spectacles (Description: Visitor Spectacles) (Add to cart: Add To Cart) | 1 | |
| 90479 | Light Duty Guard Face Shield (Description: Frame Only 8" x 12" x .040") (Add to cart: Add To Cart) | 2 | |
| 90532 | 90532;390XOPT220 Phase 2 Two-Slot Time Div Mult Access Phys Layer;Req Opt200 | 1 | |
| 873120 | JACK ADAPTER | 1 | |
| 885010 | JACK ADAPTER | 1 | |
| 900042 | BACK PRESSURE CYLINDER ADAPTOR | 1 | |
| 900764 | Mitutoyo 900764 Depth Gauge Attachment with Metric Type Holding Bar | 1 | |
| 900878 | Mitutoyo 900878 Depth Gauge Attachment with Inch Type Holding Bar | 1 | |
| 9025341 | HONDA/ACURA ADPT FOR P PRO SL | 1 | |
| 8940158775 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) | 1 | |
| 8940158776 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) | 1 | |
| 8940158777 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| 902586P1 | INTERFACE TEST ADAPTER | 1 | |
| 9045001 | COMPARATOR - BETA LIGHT : PN 9045001 / MAVOLUX 5032B USB (LUMINANCE ATTACHMENT P/N M516G AND ADAPTER DISK P/N M499G MUST BE USED WITH THE LUXMETER) OR MAVO-MONITOR USB. | 11 | |
| 906-10271-3 | P/N IW DESCRIPTION REQUIRED QTY UOM NOTES 906-10271-3 - ACCESSORY KIT 1 UN (CONSISTING OF 906-10260-11, 906-10260-12 , 906-10262-1, 906-10262-4, 906-10249-9, AND AV4E1 | 4 | |
| 90MIT65B00112 | ADAPTER ASSEMBLY - JACKING INBOARD WING, BBL 566.5 | 2 | |
| 91-6739 | ADAPTER,JACKING-WING | 11 | |
| 9142729634 | DULAC ET NOZIERES SADI TESSIERY & COLOMBINI SAS HOOK WRENCH ADAPTER | 1 | |
| 915-18633 | VXP FASTRACK OPTICAL TRACKER KIT | 3 | |
| 916-182 | AFTER JACK ADAPTER | 1 | |
| 91V100-0-160BAR-1/2NPTBTM | GAUGE PRESSURE 0-160 BAR 100 MM FACE 1/2 - MFG: IFG DE WIT BV - P/N# 91V100-0-160BAR-1/2NPTBTM | 1 | |
| 91V100-3000-N | 1.) PRESSURE GAUGE, GLYCERINE FILLED, 4 INCH SS, 0 - 3000 PSI/BAR, 1/2 INCH MALE NPT, NACE, IFG DE WIT BV | 1 | |
| 91V63-0-10000PSI-1/4NPTBTM | GAUGE PRESSURE 0-10,000 PSI 63 MM FACE 1 - MFG: IFG DE WIT BV - P/N# 91V63-0-10000PSI-1/4NPTBTM | 1 | |
| 91V63-0-1000PSI-1/4NPTBTM | GAUGE PRESSURE 0-1000 PSI 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-1000PSI-1/4NPTBTM | 1 | |
| 91V63-0-10BAR-1/4NPTBTM | GAUGE, PRESSURE 0-10 BAR 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-10BAR-1/4NPTBTM | 1 | |
| 91V63-0-2000PSI-1/4NPTBTM | GAUGE PRESSURE 0-2000 PSI 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-2000PSI-1/4NPTBTM | 1 | |
| 91V63-0-250BAR-1/4NPTBTM | GAUGE, PRESSURE 0-250 BAR 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-250BAR-1/4NPTBTM | 1 | |
| 91V63-0-4BAR-1/4NPTBTM | GAUGE, PRESSURE 0-4 BAR 63 MM FACE 1/4 I - MFG: IFG DE WIT BV - P/N# 91V63-0-4BAR-1/4NPTBTM | 1 | |
| 91V63-0-5000PSI-1/4NPTBTM | GAUGE PRESSURE 0-5000 PSI 63 MM FACE 1/4 - MFG: IFG DE WIT BV - P/N# 91V63-0-5000PSI-1/4NPTBTM | 1 | |
| 92003-2022-51 | UARSI TESTER AERIAL REFUELING RECEPTACLE UARRSI | 1 | |
| 92700-10335-101 | OPTICAL SENSOR BRACKET | 1 | |
| 92700-10500-041 | HARNESS ASSEMBLY, PHOTO CELL OPTICAL SENSOR INTERFACE | 1 | |
| 92700-10501-041 | HARNESS ASSEMBLY, LAPTOP DIAGNOSTICS INTERFACE | 1 | |
| 92723 | 92723;3550 Precision DTF / VSWR Accessory Kit; Requires Opt08 | 1 | |
| 930002 | JACKING EQPT-HYDRAULIC TELESCOPING | 9 | |
| 9300A925 | PLAYBACK ADAPTER BOARD | 1 | |
| 931030P1 | INTERFACE TEST ADAPTER | 1 | |
| 936-U071A0300000 | JACK ADAPTER | 1 | |
| 93633 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) | 1 | |
| 93634 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) | 1 | |
| 93635 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) ( | 1 | |
| 93636 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) ( | 1 | |
| 93637 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) ( | 1 | |
| 94016 | AC ADAPTER | 1 | |
| 94126 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) | 1 | |
| 94128 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) (Description: Blade Assembly with Shoe) (Add to cart: Contact us to order) | 1 | |
| 94220A520 | FLAT RIVET RECEPTACLE | 1 | |
| 94278 | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 94279 | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 94280 | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 94281 | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 94282 | Countersink Cage Assemblies and Optional Footpieces (Type: Phenolic-Footpiece w/Tool) (Add to cart: Contact us to order) (Type: Nylon-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Nylon Flanged-Footpiece w/Tool) (Add to cart: Add To Cart) (Type: Chr | 1 | |
| 9429M45 | BRACKET ADAPTER | 1 | |
| 94300 | DYNABRADE 1/4" NPT COMPOSITE DYNASWIVEL | AIR LINE ACCESSORY | 1 | |
| 9446M53 | FIXTURE SUPPORT BRACKETS - LPT MODULE | 1 | |
| 9446M53G01 | Fixture-support brackets,lpt module | 1 | |
| 9481M78 | ADAPTER - BRACKET-STANDARD ROLLOVER STAND | 1 | |
| 9481M78G01 | Adapter,bracket-standard rollover stand | 1 | |
| 95-92219-0001 | ADAPTER LH, JACKING REAR FUSELAGE | 1 | |
| 95-92220-0001 | ADAPTER RH, JACKING REAR FUSELAGE | 1 | |
| 95-92221-0001 | ADAPTER LH, JACKING REAR FUSELAGE | 1 | |
| 95-92222-0001 | ADAPTER RH, JACKING REAR FUSELAGE | 1 | |
| 95-92235-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | 1 | |
| 95-92236-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | 1 | |
| 95-92241-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | 1 | |
| 95-92242-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | 1 | |
| 95-92245-0001 | ADAPTER, LH JACKING REAR FUSELAGE | 1 | |
| 95-92246-0001 | ADAPTER, RH JACKING REAR FUSELAGE | 1 | |
| 95-92251-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | 1 | |
| 95-92252-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | 1 | |
| 95-92253-0001 | ADAPTER LH, JACKING REAR FUSELAGE | 1 | |
| 95-92254-0001 | ADAPTER RH, JACKING REAR FUSELAGE | 1 | |
| 95-92307- 0001 | ADAPTOR, JACKING NLG | 1 | |
| 95-92307-0001 | ADAPTER, JACKING N.L.G | 1 | |
| 95-92308- 0001 | ADAPTER, JACKING MLG | 1 | |
| 95-92308-0001 | Adapter jack MLG | 1 | |
| 95-92308-003 | ADAPTER JACKING MAIN LANDING GEAR | 1 | |
| 95-92581-0001 | ADAPTER VENTRAL DOOR ACTUATOR-HPU | 1 | |
| 9500-8029 | Adapter AC Service Station | 1 | |
| 951008P0 | INTERFACE TEST ADAPTER | 1 | |
| 95391 | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 95393 | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 95394 | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 95395 | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 95396 | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 95397 | Optional Skirts For Micro-Stop Countersink Cage (Type: 2 Leg-Skirt w/Tool) (Add to cart: Add To Cart) (Type: Bell-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Flange-Skirt w/Tool) (Add to cart: Contact us to order) (Type: Insert Collar-Skirt w/ | 1 | |
| 95460 | Dynabrade® Dynaswivel Air Line Connectors (Type: No-Mar Composite) (Thread size: 1/4" NPT) (Recommended air flow: 0 to 33 CFM) (Add to cart: Contact us to order) (Type: The Original) (Thread size: 1/2" NPT) (Recommended air flow: 46 to 65 CFM) (Add to car | 1 | |
| 95461 | Dynabrade® Dynaswivel Air Line Connectors (Type: No-Mar Composite) (Thread size: 1/4" NPT) (Recommended air flow: 0 to 33 CFM) (Add to cart: Contact us to order) (Type: The Original) (Thread size: 1/2" NPT) (Recommended air flow: 46 to 65 CFM) (Add to car | 1 | |
| 9520002200 | RECEPTACLE WITHOUT FILTER | 1 | |
| 9520011520 | RECEPTACLE | 1 | |
| 9520011603 | RECEPTACLE | 1 | |
| 9520011642 | RECEPTACLE | 1 | |
| 9520011644 | RECEPTACLE | 1 | |
| 9520011648 | RECEPTACLE | 1 | |
| 9520011653 | RECEPTACLE | 1 | |
| 9520011654 | RECEPTACLE | 1 | |
| 9520011692 | RECEPTACLE | 1 | |
| 955-011 | Replacement Jaw Followers for Cherry® Pulling Heads (Description: Jaw Follower) (Add to cart: Add To Cart) (Description: Jaw Follower) (Add to cart: Add To Cart) (Description: Jaw Follower Assy) (Add to cart: Add To Cart) | 1 | |
| 9550116740 | RECEPTACLE CONNECTOR | 1 | |
| 9550181340 | DUMMY RECEPTACLE | 1 | |
| 956A1176 | TOOL KIT - ADAPTER - ELECTRONIC PROTRACTOR VSV | 1 | |
| 956A1176G01 | ELECTRONIC PROTRACTOR VARIABLE STATOR VANE (VSV) ADAPTER TOOL KIT | 1 | |
| 956A1245 | ADAPTER - STRONGBACK - CORE BUILD STAND | 1 | |
| 956A1245G01 | Adapter,strongback-core build stand | 1 | |
| 956A1320 | BRACKET SET - ADAPTER - TRF | 1 | |
| 956A1320G01 | Bracket set,adapter-trf | 1 | |
| 956A1713 | BRACKET - LIFT - STG 1 HPTR ASSY | 1 | |
| 956A1713G01 | Bracket lift-stg 1 hptr assy | 1 | |
| 956A1715G01 | Bracket,lift-stg1 hptr disk | 1 | |
| 956A1840G01 | Bracket,set,trunnion-hpt case | 1 | |
| 956A3095 | FIXTURE - SPACER - HPT SHROUD | 1 | |
| 956A3292G01 | Adapter,connect lpt cg bar to strongback | 1 | |
| 956A3299G01 | Bracket,set,trunnion-hpt case | 1 | |
| 956A3713 | BRACKET - LIFT HPT | 1 | |
| 956A3713G01 | Bracket lift-stg 1 hptr assy | 1 | |
| 956A6046 | LIFTING BRACKET SET/ ADAPTER PLATE | 3 | |
| 956A6046G03 | LIFTING BRACKET SET/ ADAPTER PLATE | 5 | |
| 956A6305G01 | Fixture, Lift - Lpt Shaft,Backward | 1 | |
| 956A6321 | FIXTURE - STRONGBACK - LPT | 1 | |
| 956A6321G02 | Fixture,strongback-lpt assy | 1 | |
| 956A6321G03 | Fixture,strongback-lpt assy | 1 | |
| 956A6492G01 | Fixture,remove-lpt,bearing 5 outillage extraction roulement palier 5 | 1 | |
| 956A6492G02 | Fixture,remove-lpt,bearing 5 outillage extraction roulement palier 5 | 1 | |
| 956A6493 | FIXTURE - LIFTING/EXTRACTOR - LPT NOZZLE SUPPORT 7 | 1 | |
| 956A6493G03 | Fixture,lifting/extractor-lpt nozzle support 7 | 1 | |
| 956A6569G01 | Set,torque-oil tube,lpt rear frame kit cle raccord huile | 1 | |
| 956A6569G02 | Set,torque-oil tube,lpt rear frame kit cle raccord huile | 1 | |
| 956A6585 | TOOL SET - JACK SREWS - LPT | 1 | |
| 956A6585G01 | Tool set,jack screws-lpt | 1 | |
| 956A7314G02 | LIFTING BRACKET SET/ ADAPTER PLATE | 3 | |
| 956A7314G04 | LIFTING BRACKET SET/ ADAPTER PLATE | 9 | |
| 956A7404G01 | Dolly,storage-lpt disk rack de stockage des disques | 1 | |
| 956A7613 | ADAPTER - LOCKING, ACCESSORY GEARBOX | 2 | |
| 956A8321G01 | Fixture,remove-lpt shaft extracteur arbre tubp | 1 | |
| 956A8329 | FIXTURE, SLIDE HAMMER - LPT DISK STG 1 OUTILLAGE, EXTRACTEUR INERTIEL DISQUE TBP ETG 1 | 1 | |
| 956A8342G01 | Dolly,storage-lpt assy strongback | 1 | |
| 956A8633G03 | Fixture,lifting-lpt assy strongrack | 1 | |
| 956A8654 | FIXTURE - STRONGBACK - LPT ASSY | 1 | |
| 956A8667G01 | TURBINE CENTER FRAME LIFTING BRACKET ADAPTER | 1 | |
| 956A8667G02 | TURBINE CENTER FRAME LIFTING BRACKET ADAPTER | 2 | |
| 95734 | Dynabrade® Dynaswivel Air Line Connectors (Type: No-Mar Composite) (Thread size: 1/4" NPT) (Recommended air flow: 0 to 33 CFM) (Add to cart: Contact us to order) (Type: The Original) (Thread size: 1/2" NPT) (Recommended air flow: 46 to 65 CFM) (Add to car | 1 | |
| 95P10AR | AXLE JACK 95 TON, COMPLETED HIGH SPEED PUMP, LUBRICATOR RAIN HUT, SHIP ADAPTER | 4 | |
| 964-0434-042 | ACCEPTANCE TEST UNIT (ATU) | 1 | |
| 964-0434-XXX | ACCEPTANCE TEST UNIT (ATU) | 1 | |
| 96521161 | 7761/3-SET INTERFACE ADAPTOR | 1 | |
| 966 A1 | MICROM, OPT (ACC /- 0.001 INCH) | 9 | |
| 966A1 | MICROMETER, OPTICAL (MIN DEPTH .02 INCH AND ACCURACY /-.0005 INCH) | 9 | |
| 968.85.21.233 | JACKING ADAPTOR KIT | 1 | |
| 968.85.81.231 | JACK ADAPTER (FOR MAIN JACKS) | 1 | |
| 968.85.81.232 | JACK ADAPTER (FOR TAIL JACKS) | 1 | |
| 968.85.81.233 | KIT, JACKING ADAPTOR | 1 | |
| 968.85.81.243 | JACK PAD ADAPTER WING | 1 | |
| 968.85.81.244 | JACK PAD ADAPTER TAILS | 1 | |
| 9773 | OPTICAL TACHO ADAPTOR | 1 | |
| 9768297 | GAUGE, 0 - 300 PSI, 2-1/2" DIAL, 1/4" NPT BACK MOUNT, TYPE 232.53 2.5, F/ AIR SYSTEM | 1 | |
| 9703340000 | UPPER IBOP FOR TOP DRIVE MODEL DQ70BSC; MFG: BEIJING PETROLEUM MACHINERY CO. (NO ALTERNATIVE ACCEPTABLE) | 1 | |
| 97A32402018002 | MACHINED ADAPTOR | 1 | |
| 97A32402018004 | MACHINED ADAPTOR | 1 | |
| 97D34103000000 | AOA SENSOR TOOL - FOR CHECKING CURRENT CONSUMPTION OF ANGLE-OF-ATTACK SENSORS | 17 | |
| 98-04-08138 | AIRCRAFT ACOUSTIC TESTER(OPTIONAL) | 1 | |
| 98-04-08138 ALT 98-04-14059 | AIRCRAFT ACOUSTIC TESTER(OPTIONAL) | 1 | |
| 98-04-14059 | AIRCRAFT ACOUSTIC TESTER(OPTIONAL) | 1 | |
| 98-14-14059 | SUPPLY NETWORK OR OPTIONAL AIRCRAFT ACOUSTIC TESTER (HOLMCO) | 1 | |
| 980-7028-001 | OPTICAL TRACK AZIMUTH ALIGNMENT FIXTURE | 1 | |
| 981 | MICROMETER LIGHT FOR: ACE OPTICAL MICROMETER-378 | 1 | |
| 9832104172000 | ADAPTOR BULLET MLG JACK | 1 | |
| 98420-1080 | Extraction Tool for CPX280 Receptacle Crimp Terminal | 1 | |
| 98507008010000 | JACK PAD ADAPTERS | 1 | |
| 985−011 | Jack − Fwd Fuselage (Optional) | 1 | |
| 987-3705-001 | INTERFACE ADAPTER CABLE | 1 | |
| 987-3705-002 | INTERFACE ADAPTER CABLE | 1 | |
| 987-3705-003 | INTERFACE ADAPTER CABLE | 1 | |
| 987-3790-002 | INTERFACE ADAPTER CABLE KIT | 1 | |
| 98807008010000 | FWD FUSELAGE JACK ADAPTER | 1 | |
| 98A070030907206 | ADAPTER JACK - SAFETY JACKING // TAIL JACK P/N:HS | 1 | |
| 98A07003906000 | ADAPTOR JACKING | 1 | |
| 98A07003906001 | ADAPTOR JACKING | 1 | |
| 98A07003906002 | ADAPTOR JACKING | 1 | |
| 98A07003906200 | JACKING ADAPTOR - LOAD CELL | 15 | |
| 98A07003906201 | ADAPTOR JACKING | 1 | |
| 98A07003906202 | ADAPTOR JACKING | 1 | |
| 98A07003906204 | JACK ADAPTOR RH ENGINE | 5 | |
| 98A07003907000 | ADAPTOR JACKING | 1 | |
| 98A07003907001 | ADAPTOR JACKING | 1 | |
| 98A07003907002 | ADAPTOR JACKING | 1 | |
| 98A07003907003 | ADAPTOR JACKING | 1 | |
| 98A07003907200 | JACK ADAPTER | 15 | |
| 98A07003907200ENG | Adaptor Load-cell for Eng Shoring Jack | 1 | |
| 98A07003907200MLG | Adaptor Load-cell for MLG Jack | 1 | |
| 98A07003907201 | ADAPTOR JACKING | 2 | |
| 98A07003907202 | ADAPTOR JACKING | 6 | |
| 98A07003907204 | JACK ADAPTOR | 7 | |
| 98A07003907206 | ADAPTER JACK - SAFETY JACKING // TAIL JACK P/N:HS | 6 | |
| 98A07003909200 | JACKING ADAPTER | 4 | |
| 98A0700390XXXX | ADAPTER JACK | 1 | |
| 98A07003910200 | JACKING ADAPTER | 5 | |
| 98A07003911200 | JACKING ADAPTER | 12 | |
| 98A07003912200 | JACK ADAPTER | 1 | |
| 98A07004002000 | JACKING ADAPTOR - JACKING POINT | 9 | |
| 98A07103500000 | FUSELAGE JACK ADAPTER | 1 | |
| 98A07108635000 | ADAPTER, MAIN JACK TAIL | 1 | |
| 98A12003003000 | ADAPTER-AIR EVACUATION | 1 | |
| 98A27407518 | ADAPTER MINI HOIST ATACHMENT | 1 | |
| 98A27407518000 | ADAPTER MINI-HOIST ATACHMENT | 2 | |
| 98A27407565000 | ADAPTER - MANUAL MOVEMENT, T.H.S. ACTUATOR | 2 | |
| 98A27501501000 | ADAPTOR SET-LOCKING, FLAP JACK 1 | 4 | |
| 98A28104000000 | FUEL RECEPTACLE (FUEL DRAIN) | 37 | |
| 98A28108465000 | ADAPTER - WATER DRAIN, ACT | 5 | |
| 98A29001011000 | ADAPTOR - ACCUMULATOR CHARGING | 1 | |
| 98A32101502000 | HOISTING EQPT-MLG ACTUATING CYLINDER | 5 | |
| 98A49007519-47 | ATTACHMENT ADAPTER | 1 | |
| 98A49907616200 | OIL RECEPTACLE COMPL. | 1 | |
| 98A49907616300 | RECEPTACLE | 1 | |
| 98A54403024001 | TOOL,JACK ADAPTER | 7 | |
| 98A54403024003 | TOOL,JACK ADAPTER | 10 | |
| 98A7003906200 | NLG LOAD CELL TO JACK ADAPTERS (MACHINED IN HOUSE) | 1 | |
| 98A7003907200 | NLG LOAD CELL TO JACK ADAPTERS (MACHINED IN HOUSE) | 1 | |
| 98D0710 3500 000 | NOSE JACK ADAPTOR - FUSELAGE | 32 | |
| 98D07103001000 | JACK ADAPTER | 6 | |
| 98D07103001040 | ADAPTER JACK NOISE A320 | 3 | |
| 98D07103001042 | ADAPTER JACK MAIN GEAR A320 | 3 | |
| 98D07103001044 | ADAPTADTER JACK TAIL A320 | 3 | |
| 98D07103500000 | JACK ADAPTER-FUSELAGE | 32 | |
| 98D07104000000 | JACK ADAPTOR SET WING | 11 | |
| 98D07104000001 | JACKING ADAPTER LH | 24 | |
| 98D07104000043 | ADAPTER JACK WING R/H | 2 | |
| 98D07104000100 | MLG JACK ADAPTOR TOOL | 5 | |
| 98D07104000101 | MLG JACK ADAPTOR TOOL | 3 | |
| 98D07104081-100 | JACKING ADAPTER RH | 1 | |
| 98D07104081-101 | JACKING ADAPTER LH | 1 | |
| 98D07104081000 | JACKING ADAPTER LH | 26 | |
| 98D07203002100 | JACK ADAPTOR | 9 | |
| 98D07203004000 | CRADLE SPECIAL JACKING WITH LOAD CELL AND ADAPTER | 7 | |
| 98D07203004001 | CRADLE SPECIAL JACKING WITH LOAD CELL AND ADAPTER | 6 | |
| 98D07203006000 | ADAPTER-JACKING FR.8 | 1 | |
| 98D07203015000 | JACK ADAPTOR - PYLON | 5 | |
| 98D10103500043 | CAPT & F-O STACTIC P | 13 | |
| 98D10203500002 | MOORING KIT-NLG (USED FOR OPT. B737 TOWING BRACKET) | 2 | |
| 98D10203500004 | MOORING KIT-NLG (USED FOR OPT. B727 TOWING BRACKET) | 8 | |
| 98D27309005000 | COLLAR DEPTH ACTUATOR | 7 | |
| 98D27309008000 | COLLAR-DEPTH ACTUATOR | 9 | |
| 98D27309009 | COLLAR DEPTH ACTUATOR | 1 | |
| 98D27309009-002 | TOOL - COLLAR DEPTH ACTUATOR | 18 | |
| 98D27309009-003 | COLLAR-DEPTH ACTUATOR | 12 | |
| 98D27309009-220 | Collar-Depth Acuator | 1 | |
| 98D27309009-221 | Collar-Depth Actuator | 1 | |
| 98D2730900900 | COLLAR DEPTH ACTUATOR | 1 | |
| 98D27309009000 | COLLAR DEPTH ACTUATOR | 4 | |
| 98D27309009001 | COLLAR-DEPTH ACTUATOR | 1 | |
| 98D27309009002 | COLLAR DEPTH ACTUATOR | 18 | |
| 98D27309009003 | COLLAR DEPTH ACTUATOR | 12 | |
| 98D27309009004 | COLLAR-DEPTH ACTUATOR | 17 | |
| 98D27407506700 | Adapter，ths actuator | 1 | |
| 98D27504082000 | ADAPTER SET,GROUND HANDLING EQUIPMENT;|TOOL FLAPS ADJUTING,TRACK4; | 21 | |
| 98D27507541000 | WRENCH-BEARING,FLAPTOCARRIAGETRACK2 | 12 | |
| 98D28108293000 | ADAPTER - WATER DRAIN, ACT | 19 | |
| 98D28108293001 | ADAPTER-WATER DRAIN, ACT | 8 | |
| 98D28108293002 | ADAPTER-WATER DRAIN, ACT | 12 | |
| 98D28108559000 | ADAPTER, TUBE - DRAIN VALVE, AC | 8 | |
| 98D28108559040 | Adapter tube drain valve ACT1 complete | 1 | |
| 98D28108561000 | EXTRACTOR ADAPTER TUBE WATER DRAIN | 13 | |
| 98D2810856200 | Pressure test drain adapter act | 1 | |
| 98D28108562000 | ADAPTER, PRESSURE DRAIN-ACT | 12 | |
| 98D28108563000 | EXTRACTOR ADPT TUBE WATER DRAIN TOOL | 12 | |
| 98D29003502040 | TECHSPACE ADAPTOR | 7 | |
| 98D32104009006 | EQPT-R/I OF THE MLG ACTUATOR | 12 | |
| 98D32104009007 | ACTUATOR, EQPT-R/I OF MLG | 15 | |
| 98D32403003000 | DRIVING ADAPTER, WHEEL TACHOMETERS | 19 | |
| 98D32403004000 | DRIVING ADAPTOR NLG TACHYMETER | 20 | |
| 98D34003500100 | ADAPTOR COVER (2 EACH) | 9 | |
| 98D38308234001 | ADAPTER PRESSURE SWITCH VACUUM TOILET SYSTEM | 13 | |
| 98D54503000000 | TOOL,JACK ADAPTER | 22 | |
| 98D54503000001 | TOOL,JACK ADAPTER | 7 | |
| 98D55209004000 | COLLAR-DEPTH ACTUATOR | 20 | |
| 98D57004098266 | Jacking adapter | 1 | |
| 98D71203022000 | IDG MOUNTING ADAPTER (INCLUDED WITH BRACKET) | 12 | |
| 98DS07003000001 | JACK ADAPTER WING | 1 | |
| 98F070108635000 | ADAPTER-AFT,JACKING | 1 | |
| 98F07101003000 | ADAPTER JACK FUSELAGE | 4 | |
| 98F07101003001 | ADAPTOR-JACK NOSE | 1 | |
| 98F07103000002 | REAR CELL JACK ADAPTOR | 1 | |
| 98F0710300001 | ADAPTOR - JACK NOSE | 1 | |
| 98F07103500000 | NOSE JACKING ADAPTER | 1 | |
| 98F07103500001 | ADAPTOR-JACK NOSE | 20 | |
| 98F07104000000 | JACK ADAPTOR | 6 | |
| 98F07104000001 | JACK ADAPTER, SET | 12 | |
| 98F07104000001-042 | LH WING JACK ADAPTOR TOOL | 1 | |
| 98F07104000001-043 | RH WING JACK ADAPTOR TOOL | 1 | |
| 98F07104000002 | ADAPTOR-JACK NOSE | 15 | |
| 98F07104000201 | JACK ADAPTER, RH | 1 | |
| 98F07107501000 | ADAPTER-AFT,JACKING | 17 | |
| 98F07107501051 | JACKING ADAPTER | 1 | |
| 98F07108635000 | ADAPTER-AFT,JACKING | 14 | |
| 98F07108635200 | JACKING ADAPTER | 1 | |
| 98F07203002000 | AUX. JACK AND LOAD CELL ADAPTORS | 3 | |
| 98F07203002001 | AUX. JACK AND LOAD CELL ADAPTORS | 5 | |
| 98F07203002004 | AUX. JACK AND LOAD CELL ADAPTORS | 4 | |
| 98F07203002005 | AUX. JACK AND LOAD CELL ADAPTORS | 4 | |
| 98F07203010000 | JACKING ADAPTOR FOR TRANSLATION | 1 | |
| 98F07203014202 | ADAPTER (AUXILIARY JACKS) | 1 | |
| 98F07203017000 | HYDRO JACK ADAPTOR | 1 | |
| 98F21001004001 | R/I EQPT-PACK/EXCHANGER | 11 | |
| 98F32104008000 | HOIST EQUPT ACT.MLG | 15 | |
| 98F32104008001 | HOIST EQPT - ACTUATOR, MLG (WITHOUT STD WINDING) | 4 | |
| 98F57103020234 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020236 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020238 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020240 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020242 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020244 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020250 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020254 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F57103020262 | BOLT BOLT EXTRACTOR ADAPT | 1 | |
| 98F7103500001 | JACK ADAPTER | 1 | |
| 98F7107501000 | JACK ADAPTER | 1 | |
| 98L07008510000 | ADAPTER-SUPPORT, AFT JACKING | 1 | |
| 98L07008510001 | ADAPTOR-SUPPORT, AFT JACKING | 4 | |
| 98L07008510202 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510204 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510206 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510208 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07101000000 | ADAPTOR-JACK NOSE | 4 | |
| 98L07103000000 | ADAPTER JACK PAD | 3 | |
| 98L07103003200 | ADAPTER WING JACK PAD ADAPTER | 1 | |
| 98L07104003000 | WING JACK ADAPTOR L & R | 6 | |
| 98L1010H002-103 | ACCEPTANCE | 1 | |
| 98L27003001000 | COLLAR DEPTH ACTUATOR | 4 | |
| 98L27003002000 | COLLAR, DEPTH ACTU 20 DEGREES | 2 | |
| 98L34001000000 | ADAPTATEUR CALIBRATION COMPAS SECOURS BRACKET STANDBY COMPASS CALIBRATOR | 4 | |
| 98L44508762000 | Adapter cvms, access | 1 | |
| 98L52108459102 | RECEPTACLE COMPL. | 1 | |
| 98L57103000218 | EXTRACT ADAPTER | 1 | |
| 98L57103000220 | EXTRACT ADAPTER | 1 | |
| 98S 070 0 3000 000 | AFT FUS/WING JACK ADAPTER | 3 | |
| 98S 070 0 3000 001 | AFT FUS/WING JACK ADAPTER | 16 | |
| 98S 070 0 8010 000 | FWD FUSELAGE JACK ADAPTER | 19 | |
| 98S 270 0 3002 000 | TRIM ACTR MNL DRIVE ADPTR | 10 | |
| 98S07000005000 | JACK PT PLUG SCREW DRIVER | 14 | |
| 98S07003000 000 | AFT FUS/WING JACK ADAPTER | 3 | |
| 98S07003000-200 | AFT' FUSELAGE JACK ADPT' | 1 | |
| 98S0700300000 | WING JACK ADOPTER | 1 | |
| 98S07003000000 | Aft Fus/Wing Jack Adapter | 3 | |
| 98S07003000001 | Aft Fus/Wing Jack Adapter | 16 | |
| 98S07003000001-REVC0 | AFT FUS/WING JACK ADAPTER | 1 | |
| 98S07003000001-ST | WING OR AFT FUSELAGE JACK ADAPTER | 1 | |
| 98S07003000001 | AFT FUSELAGE / WING JACK ADAPTOR | 16 | |
| 98S07003000002 | Aft Fus/Wing Jack Adapter | 1 | |
| 98S07003010000 | JACK ADAPTER | 1 | |
| 98S07008010000 | Fwd Fuselage Jack Adapter | 19 | |
| 98S07008010000-REVB0 | FWD FUSELAGE JACK ADAPTER | 1 | |
| 98S07008010000-ST | FORWARD FUSELAGE JACK ADAPTER | 1 | |
| 98S07008010000 | NOSE JACK ADAPTOR | 19 | |
| 98S07008010000 | JACK ADAPTOR FOR MID FUSELASE BESIDE LG | 19 | |
| 98S07008010001 | Fwd Fuselage Jack Adapter | 1 | |
| 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | |
| 98S27003002000 | Trim Actr Mnl Drive Adptr | 10 | |
| 98S27003002000-ST | TRIM ACTUATOR MNL DRIVER ADAPTER | 1 | |
| 98S53805002-000 | ATR REFERENCE STANDARD 53-61-18 PT 6 FIGURE 603 PAGE 609. INSPECTION OF REAR PRESSURE BULKHEAD PERIPHERY OF DOME SKIN AND CONNECTION WITH VERTICAL FLANGE OF DOME VERTICLAL CHORD. Includes Test Report traceable to NIST and Certificate of Conformance. | 6 | |
| 98S57008010000 | FWD FUSELAGE JACK ADAPTER | 1 | |
| 98S57105027000 | Injection Jacking Pt RIB10 | 3 | |
| 98S61000007000 | ADAPTOR TQ (PROP ASSY ATTACH TO GEARBOX NUT R/I) | 9 | |
| 98S7008010000 | ATR / ADAPTER JACK | 1 | |
| 98S7008010001 | ATR / ADAPTER JACK | 1 | |
| 98S71005001200 | AC WALT ADAPTOR 1EA | 9 | |
| 98V07104000000 | ADAPTOR - WING JACKING | 1 | |
| 98V07104002000 | ADAPTOR-WING JACKING | 1 | |
| 98V07104002000 (NLP) | ADAPTOR - WING JACKING | 1 | |
| 98V07104003000 | Adaptor-wing jacking | 6 | |
| 98V07104004000 | ADAPTOR - WING JACKING | 1 | |
| 98V07109001000 | ADAPTER - AFT JACKING | 6 | |
| 98V07109001001 | JACKING ADAPTER - AFT JACKING | 2 | |
| 98V44208865000 | ADAPT-TORQUE, IFE-RACK | 1 | |
| 98V52203000000 | CPRSR-JACK,CKPT HATCH | 3 | |
| 98V54503011000 | ADAPTOR JACK - PYLON | 3 | |
| 98d27309009100 | COLLAR-DEPTH ACTUATOR | 1 | |
| 98d27309009102 | COLLAR-DEPTH ACTUATOR | 1 | |
| 990-00.01.035 | RECEPTACLE WITH RED WARNING FLAG | 1 | |
| 99046 | 724-PSEU - ADAPTER, 100-240 VAC IN, 24VDC 0.25A OUT, UK & EURO PLUGS | 1 | |
| 995050 | FACE SEAL ADAPTER (FSA) | 1 | |
| 9922010010 | RECEPTACLE CONNECTOR | 1 | |
| 998-2232-506 | ACCEPTANCE TEST PROCEDURE | 1 | |
| 998-2551-508 | ACCEPTANCE TEST PROCEDURE SETUP DISK | 1 | |
| 998-2687-504 | ACCEPTANCE TEST PROCEDURE SETUP DISK | 1 | |
| 99L44508762-000 | ADAPTOR - CVMS, ACCESS | 1 | |
| 99L44508762000 | ADAPTER-CVMS,ACCESS | 1 | |
| 99L44508762001 | ADAPTER-CVMS, ACCESS | 1 | |
| 99V44508001000 | ADAPTER ACCESS | 1 | |
| 9BS07008010000 | FLUID FUSELAGE JACK ADAPTOR | 1 | |
| 9C1091G01 | ADAPTER TORQUE - NO.4 BEARING INNER RACE SPANNER NUT | 1 | |
| 9C1204 | ADAPTER - JACK STAND-IDG | 1 | |
| 9C1204801 | ADAPTER - JACKSTAND, 8E90 108 | 1 | |
| 9C1204G01 | ADAPTER-JACKSTAND | 7 | |
| 9C1393 | ADAPTER SET HYR-VSS & ACTUATOR | 1 | |
| 9C1393G01 | ADAPTER SET HYR-VSS & ACTUATOR | 2 | |
| 9C1627 | SPACER LIFTING ADAPTER | 1 | |
| 9C1700G02 | WRENCH - ADAPTER BHGE 9C1700G02 SPECIAL TOOL FOR VARIBLE STATOR VINE VALVE (VSV) ACTUATOR COMPONENTS REPLACEMENT AND IGV, VSV INSPECTION | 3 | |
| 9C3165G04 | Fixture,torque reaction-lpt shaft to electronic nutrunner | 1 | |
| 9C3403G01 | ADAPTER, INSTALL/REMOVAL - LINE REPLACEABLE UNITS | 1 | |
| 9C3407 | ADAPTER - VACUUM - C- SUMP AOS | 1 | |
| 9C3411G04 | Fixture,torque reaction-lpt shaft to electronic | 1 | |
| 9PS070030000 | Adaptor-Jack | 1 | |
| 9R3756-TA | RETRACT PORT ADAPTER | 1 | |
| 9SU1070 | CSD GENERATOR JACK ADAPTER | 1 | |
| A-C148659-1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A-C148659-113 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| A0110284 | DRIVE BLOCK EXTRACTOR ADAPTER | 1 | |
| A0111248 | DRIVE BLOCK EXTRACTOR ADAPTOR | 1 | |
| A0111248. | DRIVE BLOCK EXTRACTOR ADAPTOR. | 1 | |
| A0123343 | EXTRACTION ADAPTER | 1 | |
| A0267-00-000 | FERR-ADAPT STEEL TORQUE MACHINE AIR COND AERO | 1 | |
| A07001 | JACK ADAPTER FWD BODY | 1 | |
| A07001-1 | Jack Adapter-Forward Body | 1 | |
| A07001-11 | FWD BODY JACK ADAPTER | 16 | |
| A07001-11 | ACK ADAPTER - FORWARD BODY | 16 | |
| A07001-11-M | JACKING ADAPTER | 1 | |
| A07002-1 | EMERG JACKING EQPT | 5 | |
| A07002-11 | JACKING EQPT | 4 | |
| A07002-12 | JACKING EQPT | 3 | |
| A07003 | Jack Adaptor | 1 | |
| A07003-1 | JACK ADAPTER - OUTBOARD WING | 14 | |
| A07004-1 | AXLE JACK ADAPTOR SET | 1 | |
| A070048-1 | OTBD WING JACK ADAPT | 1 | |
| A07008 | JACKING BAR EQPT MLG AXLE | 1 | |
| A07008-19 | ADAPTER JACK EMERGEN | 6 | |
| A07008-25 | Jacking Bar Eqpt - MLG Axle | 1 | |
| A07008-28 | JACKING BAR EQPT | 2 | |
| A07008-29 | Jacking Bar Eqpt - MLG Axle | 1 | |
| A07009-1 | Jacking Bar Eqpt - MLG Axle | 1 | |
| A07011-11 | JACK ADAPTER | 1 | |
| A0PACR4 | MS90362-4, 6 POLE RECEPTACLE W/SHIELD | 1 | |
| A12005 | LUBRICATION ADAPTER ATTACH FITTING WING/NACELLE | 1 | |
| A12005-1 | LUBRICATION ADAPTER - ATTACH FITTING, WING/NACELLE | 11 | |
| A12005-1-M | WING/NACELLE LUB ADAPTOR | 1 | |
| A161 | Boeing Standard, 707 PT6 53-10-07 FIG2: PG6 SHEET3, BACR15CE6D6C Alodine Rivet only | 1 | |
| A20001 | BOOM HOIST EQPT-GENERAL (400 LB CAPACITY) | 2 | |
| A20001-185 | BOOM HOIST EQPT - GENERAL (400 LB CAPACITY) | 9 | |
| A20001-65 | BOOM HOIST EQPT - GENERAL, LONG HOIST ARM ASSY (175 LB CAPACITY) | 9 | |
| A21001 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-1 | HOIST ADAPT- AIR/CON PACK | 1 | |
| A21001-10 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-11 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-12 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-13 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-14 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-15 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-16 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-17 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-18 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-19 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-2 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-20 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-21 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-22 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-23 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-24 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-25 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-26 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-27 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-28 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-29 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-3 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-30 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-31 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-32 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-33 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-34 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-35 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-36 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-37 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-38 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-39 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-4 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-40 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-41 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-42 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-43 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-44 | HOIST ADAPTERS - AIR CONDITIONING PACK | 13 | |
| A21001-45 | HOIST ADAPTERS - AIR CONDITIONING PACK | 10 | |
| A21001-46 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-47 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-5 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-6 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21010-203 | VACUUM TANK-PRESSURE RELIEF VALVE TESTER ADAPTER ASSY | 12 | |
| A21010-70 | TESTER, VACUUM TANK PRESSURE RELIEF VALVE EQPT. | 6 | |
| A21013-50 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 2 | |
| A23001-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| A24008-27 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 3 | |
| A24008-37 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 11 | |
| A24011-1 | JACK-ADAPTER IDG TO USE TOGETHER WITH 9C1204G01 ( ADAPTER JACK STAND IDG) ON 9C1132G05- JACK STAND IDG | 13 | |
| A25001-33 | Replacement Eqpt - Air Chiller, Fwd Galley | 4 | |
| A25020-4 | OPT GAUGE-INSPECTION, SEAT TRACK | 5 | |
| A27006 | HOIST EQPT HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| A27006-41 | Hoist Eqpt - Horizontal Stabilizer Trim Actuator | 10 | |
| A27021-29 | ADAPTER EQUIPMENT - CONTROL WHEEL (CONTAINS 2 EA -30 PROTRACTORS) ONE -30 IS FUNCTIONALLY IDENTICAL TO A 4MIT65B80307-1 (THE BOEING COMPANY) | 17 | |
| A27021-98 | ADAPTER - ADAPTER EQUIPMENT, CONTROL WHEELS BUBBLE PROTRACTOR | 13 | |
| A27035-1 | Screwdriver - Adapter Rudder/Elevator Feel Actuator Cylinder | 3 | |
| A27057-1 | PROTRACTOR BRACKET EQPT - FEEL CENTERING & TRIM IN | 2 | |
| A27057-13 | Protractor Bracket Eqpt - Rudder Control | 3 | |
| A27057-9 | PROTRACTOR BRACKET EQPT - FEEL CENTERING & TRIM CO | 1 | |
| A27070-61 | Bearing instl eqpt-rotary act/offset gearbox.l.e.slat dr | 1 | |
| A27070-65 | Bearing instl eqpt-rotary act/offset gearbox.l.e.slat dr | 1 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A27078-7 | SPLINE ADAPTERS - LEADING EDGE SLAT DRIVE ROTARY ACTUATORS AND GEARBOXES | 1 | |
| A27097 | ADAPTER PROTRACTOR THRUST REVERSER LEVER | 1 | |
| A27097-1 | ADAPTER - PROTRACTOR, THRUST REVERSER LEVER | 3 | |
| A27111 | LOCK EQPT-ELEVATOR ACTUATOR | 1 | |
| A27111-1 | ELEV. ACT. LOCK EQPT | 3 | |
| A27111-11 | Lock Eqpt-Elevator Actuator | 15 | |
| A27115-45 | Test Eqpt - Outboard Aileron Lockout Acutator | 5 | |
| A27128-1 | Rmvl/Instl Eqpt - Outbd Flat Actr Crank Arm Mech | 5 | |
| A28005-50 | TEST EQUIPT CLACK & PRESSU | 18 | |
| A28015-1 | FUEL NUT RECEPTACLE REMOVAL | 2 | |
| A3-06-3474 | BATTERY CURRENT MEASUREMENT ADAPTER BATTERY TO MAIN PCB INTERFACE BREAKOUT CABLE | 1 | |
| A320-57-1089 | JACK PAD ADAPTORS | 1 | |
| A32005-53 | MLG SEAL REPLACEMENT EQUPT. | 1 | |
| A32005-54 | REPLACEMENT EQPT- | 9 | |
| A32005-74 | REPLACEMENT EQPT SEAL - LOWER BEARING SEAL | 10 | |
| A32029-50 | REPLACEMENT EQPT | 13 | |
| A32032-11 | JACK ADAPTER | 3 | |
| A32032-25 | B767 JACK ADAPTER TOOL | 1 | |
| A32041-1 | TORQUE ADAPTER - CYLINDER, NOSE LANDING GEAR (NLG) RETRACT ACTUATOR | 2 | |
| A32061-1 | Backlash Check Eqpt - NLG Steering Gearbox | 1 | |
| A32070-1 | RETRACT ACT. SNUBBER TORQUE ADAPTER | 1 | |
| A32078-1 | ADAPTER SET - RETAINING NUT, ACTUATOR SIDE AND DRAG BRACE, MAIN LANDING GEAR (MLG) | 1 | |
| A32107-1 | REPLACEMENT EQPT | 2 | |
| A32120-1 | TORQUE ADAPTER SET - ACTUATOR COMPONENTS, MAIN LANDING GEAR (MLG) | 1 | |
| A32121-1 | Fixture eqpt-landing gear actuator assys | 2 | |
| A34001-4 | NO LONGER AVAILABLE - No Replacement - EQUIPT- WARNING, ATC, VHF, AND | 12 | |
| A34016-138 | Adapter - Black | 1 | |
| A34016-139 | Adapter - Black | 1 | |
| A34016-140 | Adapter - Black | 1 | |
| A34016-141 | Adapter - Black | 1 | |
| A34016-35 | Cable Assy - Spacer Eqpt | 5 | |
| A34016-35-E | CABLE/SPACER EQPT | 1 | |
| A35001-10 | RETRACTION EQIPT | 20 | |
| A35001-10-M | RETRACTION EQPT | 1 | |
| A35001-13 | RETRACTION EQPT | 8 | |
| A35001-2 | RETRACTION EQPT | 6 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A38001 | VACUUM TEST EQPT-VACUUM WASTE SYSTEM | 1 | |
| A38001-16 | VACUUM TES EQPT - VACUUM WASTE SYSTEM | 10 | |
| A38001-22 | VACUUM WASTE SYSTEM TEST EQPT | 22 | |
| A38001-65 | Plug Eqpt - Vacuum Test Eqpt | 8 | |
| A38001-68 | Vacuum test eqpt-vacuum waste system | 12 | |
| A38012 | PUMP EQPT-VACUUM LAV SYSTEM | 1 | |
| A38012-1 | PUMP EQPT - VAC LAV | 2 | |
| A38012-18 | PUMP EQPT - VACUUM LAV SYSTEM (RECIRCULATING SYSTEM) (THE BOEING COMPANY) | 4 | |
| A38012-39 | Pump Eqpt - Vacuum Lav System | 12 | |
| A38012-40 | Pump Eqpt - Vacuum Lav System | 12 | |
| A38012-64 | MALE ADAPTOR FOR PUMP EQUIPMENT-VACUUM LAVATORY | 1 | |
| A38012-85 | Pump Eqpt - Vacuum Lav System | 8 | |
| A38012-86 | Pump Eqpt - Vacuum Lav System | 7 | |
| A3Q | DIAL INDICATOR,ADJ BACK WITH PT118 | 3 | |
| A4162 | RF ADAPTER (SMA(F) TO SMB JACK | 1 | |
| A49001-73 | JACK EQPT | 1 | |
| A49001-83 | JACK EQPT | 6 | |
| A512 | Meyer Hydraulics Helicopter Nose Jack, 12-20 in | 4 | |
| A51S61160-1 | FWD JACK ADAPTER | 1 | |
| A52006-1 | REPLACEMENT EQPT | 3 | |
| A52023-1 | Backlash eqpt | 1 | |
| A52034 | RIGGING EQPT ROTARY ACTR. MAIN DECK CARGO DOOR | 1 | |
| A52034-1 | Rigging Eqpt - Rotary Act Main Deck Cargo Dr | 4 | |
| A532A400-1103T | CLAMP,CABLE,RECEPTACLE,ELECTRICAL | 1 | |
| A54004 | JACKING EQPT – HINGE, HORIZ STAB | 1 | |
| A55004-123 | JACKING EQPT-HINGE HOR. STAB | 2 | |
| A55004-73 | JACKING EQUIPT- HINGE, HORIZ. STABILISER | 1 | |
| A55004-83 | JACKING EQPT | 1 | |
| A55004-85 | JACKING EQPT | 1 | |
| A55004-98 | Jacking Eqpt-Hinge, Horiz Stab | 9 | |
| A55009 | PLATFORM EQPT – EMPENNAGE ACCESS, VERTICAL FIN | 1 | |
| A55009-1 | Plaftorm eqpt-empennage access，vertical fin | 8 | |
| A57002-1 | REPLACEMENT EQPT-WEDGE | 2 | |
| A57003-1 | Locating eqpt-wedge replacement inbd/outbd L.E. slat | 4 | |
| A71003-53 | TORQ EQPT (REPLACES | 9 | |
| A71013-19 | SPACER HOIST ADAPTOR- IDG DRIVE | 6 | |
| A71013-32 | JACK WITH ADAPTER FOR IDG | 5 | |
| A71013-88 | Spacer, Hoist Adapter | 1 | |
| A71013-88-M | SPACER, HOIST ADAPTER | 1 | |
| A71015-108 | LIFT FIXTURE - ENGINE ACCESSORY (CE) THE A71015-108 (OPTION, CE QUALIFIED)A71015-157 (PREFERRED, CE | 17 | |
| A71015-157 | LIFT FIXTURE - ENGINE ACCESSORY (CE) THE A71015-108 (OPTION, CE QUALIFIED)A71015-157 (PREFERRED, CE | 7 | |
| A71023-20 | Receptacle | 1 | |
| A77005-60 | Test Eqpt-Engine N1 and N2 Interface | 1 | |
| A77005-61 | Test Eqpt - Engine N1 and N2 Interface | 1 | |
| A78014-1 | Clam Shell Eqpt - Track Slider, Thrust Reverser | 2 | |
| A78021-46 | Test Overhaul Eqpt - Cowl Door Actuator | 1 | |
| A81S | FIBRE OPTIC FUSION SPLICING MACHINE | 1 | |
| AAP101CH5 | RECEPTACLE | 1 | |
| AB07001-DY4 | JACKING ADAPTER FWD BODY | 1 | |
| AB07001-Y5L | JACKING ADAPTER LH | 1 | |
| AB07001-Y5M | JACKING ADAPTER RH | 1 | |
| AB07001-Y8D | JACKING ADAPTERS SET WING | 1 | |
| AB07001-YL3 | JACKING ADAPTERS SET WING | 1 | |
| AB07002-R2A | JACKING ADAPTERS SET WING | 1 | |
| AB07003-R3C | JACKING ADAPTERS SET WING | 1 | |
| AB07004-R3E | JACKING ADAPTER FWD BODY | 1 | |
| AB27001-SS8 | COLLAR DEPTH ACTUATOR | 1 | |
| ABS0368-01 | RECEPTACLE | 3 | |
| ABS0892-2 | RECEPTACLE | 1 | |
| AC 20-1005P-02L-600# | commercial pressure gauge, 2.5in dial, black ABS case, bronze tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 25-1001TH-01B-XUC-160# | panel pressure gauge, 2.5in dial, steel case, bronze tube, 1/8in NPT back connection, U clamp, 0-160PSI range | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC-CAR-CHARGER | AC-CAR-CHARGER;Car Adapter for OneExpert DSL | 1 | |
| AC-CHARGER | AC-CHARGER;AC Universal Power Adapter | 1 | |
| AC-PKG-BF-00 | AC-PKG-BF-00;MAP-Series OPM Barefiber Adaptors Kit | 1 | |
| AC-PKG-CASE | AC-PKG-CASE;MAP-Series OPM adaptor empty hard case with foam | 1 | |
| AC-PKG-CF-00 | AC-PKG-CF-00;MAP-Series OPM Cylindrical Ferrule Holder Adaptors Kit | 1 | |
| AC-PKG-DX-00 | AC-PKG-DX-00;MAP-Series OPM Duplex Adaptors Kit | 1 | |
| AC-PKG-GK-00 | AC-PKG-GK-00;MAP-Series OPM General Adaptors Kit | 1 | |
| AC-PKG-HD-00 | AC-PKG-HD-00;MAP-Series OPM Hardened Adaptors Kit | 1 | |
| AC-PKG-MF-00 | AC-PKG-MF-00;MAP-Series OPM Multi-Fiber Adaptors Kit | 1 | |
| AC-PKG-SF-00 | AC-PKG-SF-00;MAP-Series OPM Standard Single Adaptors Kit | 1 | |
| AC-PKG-SK-00 | AC-PKG-SK-00;MAP-Series OPM Super Adaptors Kit | 1 | |
| AC-PKG-SP-00 | AC-PKG-SP-00;MAP-Series OPM Specialty Adaptors Kit | 1 | |
| AC100 | AC100;MAP-Series OPM adaptor Cap non-locking | 3 | |
| AC102 | AC102;MAP-Series OPM adaptor ST non-locking | 1 | |
| AC103 | AC103;Detector Adapter SC | 1 | |
| AC109 | AC109;MAP-Series OPM adaptor SMA905 | 1 | |
| AC10K-ADPTRKIT | AC10K-ADPTRKIT;Calibration Kit; VSWR/DTF | 1 | |
| AC10K-HEADSETADPTR | AC10K-HEADSETADPTR;Headset Adapter | 1 | |
| AC10K-PWRADPTR | AC10K-PWRADPTR;AVX-10K AC/DC Power Adapter | 1 | |
| AC114 | AC114;Detector Adapter Mu | 1 | |
| AC115 | AC115;MAP-Series OPM adaptor E2000 non-locking | 1 | |
| AC116 | AC116;MAP-Series OPM adaptor 2.5 mm ferrule non-locking | 1 | |
| AC116L | AC116L;MAP-Series OPM adaptor 2.5 mm ferrule with LC centering non-locking | 1 | |
| AC121 | AC121;MAP-Series OPM adaptor Bare-fiber adaptor includes AC920 | 1 | |
| AC123 | AC123;MAP-Series OPM adaptor 1.25 mm ferrule non-locking | 1 | |
| AC134 | AC134;MAP-Series OPM adaptor Fujikura splice chuck barrel requires AFL holder | 1 | |
| AC135 | AC135;MAP-Series OPM adaptor 2.0 mm ferrule non-locking | 1 | |
| AC136 | AC136;MAP-Series OPM adaptor 1.0 mm ferrule non-locking | 1 | |
| AC137 | AC137;MAP-Series OPM adaptor 1.6 mm ferrule non-locking | 1 | |
| AC21830000 | JACK ADAPTOR | 1 | |
| AC900 | AC900;MAP-Series OPM adaptor Magnetic dark level cap | 1 | |
| AC901 | AC901;MAP-Series OPM adaptor FC locking | 1 | |
| AC903 | AC903;MAP-Series OPM adaptor SC locking | 1 | |
| AC912P | AC912P;MAP-Series OPM adaptor MT ferrule locking | 1 | |
| AC913 | AC913;MAP-Series OPM adaptor Ribbon-fiber up to 16F includes AC920 locking | 1 | |
| AC914 | AC914;MAP-Series OPM adaptor MU locking | 1 | |
| AC917P | AC917P;MAP-Series OPM adaptor MPO-MTP locking | 1 | |
| AC917U | AC917U;MAP-Series OPM adaptor MPO-MTP universal keyway locking | 1 | |
| AC918 | AC918;MAP-Series OPM adaptor LC locking | 1 | |
| AC918D | AC918D;MAP-Series OPM adaptor Duplex LC locking | 1 | |
| AC918IS | AC918IS;MAP-Series OPM adaptor Duplex LC locking for use with mOPM-C1RHIS series | 1 | |
| AC918M | AC918M;MAP-Series OPM adaptor mini duplex LC locking | 1 | |
| AC920 | AC920;MAP-Series OPM adaptor Replacement barrel for AC913 AC113 AC121 locking | 1 | |
| AC924P | AC924P;MAP-Series OPM adaptor MXC locking | 1 | |
| AC930 | AC930;MAP-Series OPM adaptor Barrel holder AC931 | 1 | |
| AC931 | AC931;MAP-Series OPM adaptor Fujikura-Sumitomo splice chuck holder req. AC930 | 1 | |
| AC932 | AC932;MAP-Series OPM adaptor DLX locking | 1 | |
| AC933 | AC933;MAP-Series OPM adaptor SC Hardened OptiTap locking | 1 | |
| AC934 | AC934;MAP-Series OPM adaptor HMFOC Socket locking | 1 | |
| AC935 | AC935;MAP-Series OPM adaptor HMFOC plug OptiTip locking | 1 | |
| AC936D | AC936D;MAP-Series OPM adaptor Duplex MDC locking | 1 | |
| AC937D | AC937D;MAP-Series OPM adaptor Duplex CS locking | 1 | |
| AC937D-B | AC937D-B;MAP-Series OPM adaptor Duplex Bend-latch CS locking | 1 | |
| AC938D | AC938D;MAP-Series OPM adaptor Duplex SN locking | 1 | |
| AC939D | AC939D;MAP-Series OPM adaptor Universal duplex SN-MDC locking | 1 | |
| AC940 | AC940;MAP-Series OPM adaptor IP-16 SN Locking | 1 | |
| AC941 | AC941;MAP-Series OPM adaptor MMC locking | 1 | |
| AC942 | AC942;MAP-Series OPM adaptor IP9 locking | 1 | |
| AC943 | AC943;MAP-Series OPM Adaptor TMT ferrule locking | 1 | |
| AC944 | AC944;MAP-Series OPM adaptor ODC-2 Plug locking | 1 | |
| AC945 | AC945;MAP-Series OPM adaptor ODC-2 Socket locking | 1 | |
| AC946 | AC946;MAP-Series OPM adaptor SN-MT locking | 1 | |
| AC947 | AC947;MAP-Series OPM adaptor expanded beam locking | 1 | |
| AC950 | AC950;MAP-Series OPM adaptor clamshell holder req. AC951 | 1 | |
| AC950-95A | AC950-95A;MAP-Series OPM adaptor AC950 with small circular aperture | 1 | |
| AC950-95B | AC950-95B;MAP-Series OPM adaptor AC950 with large circular aperture | 1 | |
| AC950-95C | AC950-95C;MAP-Series OPM adaptor AC950 with slit aperture | 1 | |
| AC951 | AC951;MAP-Series OPM adaptor clamshell universal connector req. AC950 | 1 | |
| AC951-000 | AC951-000;MAP-Series OPM adaptor AC951 with blank insert | 1 | |
| AC951-912 | AC951-912;MAP-Series OPM adaptor AC951 with MT insert | 1 | |
| AC951-931 | AC951-931;MAP-Series OPM adaptor AC951 with splice chuck holder insert | 1 | |
| AC951-943 | AC951-943;MAP-Series OPM adaptor AC951 with TMT insert | 1 | |
| ACAP901 | ACAP901;MAP-Series OPM adaptor Set of 2 AC901 aperture plates | 1 | |
| ACAP903 | ACAP903;MAP-Series OPM adaptor Set of 2 AC903 aperture plates | 1 | |
| ACAP917 | ACAP917;MAP-Series OPM adaptor Set of 2 AC917 and AC912 aperture plates | 1 | |
| ACAP918 | ACAP918;MAP-Series OPM adaptor Set of 2 AC918 aperture plates | 1 | |
| ACAP918D | ACAP918D;MAP-Series OPM adaptor Set of 2 AC918D aperture plates | 1 | |
| ACAP935 | ACAP935;MAP-Series OPM adaptor Set of 2 AC935 aperture plates | 1 | |
| ACAP95A | ACAP95A;MAP-Series OPM adaptor AC950 small circular aperture plates | 1 | |
| ACAP95B | ACAP95B;MAP-Series OPM adaptor AC950 large circular aperture plates | 1 | |
| ACAP95C | ACAP95C;MAP-Series OPM adaptor AC950 dual row slit aperture plates | 1 | |
| ACCH000 | ACCH000;MAP-Series OPM Adaptor blank insert for AC951 | 1 | |
| ACCH912 | ACCH912;MAP-Series OPM Adaptor MT insert for AC951 | 1 | |
| ACCH931 | ACCH931;MAP-Series OPM Adaptor Splice chuck holder insert for AC951 | 1 | |
| ACCH943 | ACCH943;MAP-Series OPM Adaptor TMT insert for AC950 | 1 | |
| ACK-2 | ACK-2 GREASE GUN ADAPTOR | 18 | |
| ACN16-FM4F6-R | OLYMPUS CABLE/ADAPTER - 16 PIN LEMO TO 4 PIN FISCHER RECEPTACLE, REFLECTION, 6.0' FEET LONG, NORTEC 500- 2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | 1 | |
| ACP2D-7L1B/6-B | CABLE PIG TALE 6.0'INCH 12 PIN MALE TO 7 PIN FEMALE (RECEPTACLE) LEMO 1B SIZE. | 1 | |
| ACP3PR | Portable Receptacle - MS3506 | 1 | |
| ACR-2929 | ACR OPTICAL PROGRAMMING WAND KIT | 1 | |
| ACRI917 | ACRI917;MAP-Series OPM adaptor Set of 5 replacement inserts for AC917U | 1 | |
| ACU-302 | AIR CONDITIONER & HEATER - 24 TON COOLING CAPACITY - 234,000 BTU/HR HEATING CAPACITY - R134 A REFRIG POWERED BY CUMMINS DIESEL. OPTIONAL POWER X-FER SWITCH AVAIL. TO ALLOW OPERATION FROM FACILITY POWER. | 1 | |
| AD310-300MS | OPTIONAL AIR DATA ACCESSORY KIT, NAV AIDS LTD OR ADA310-945 (RVSM) | 1 | |
| AD505-2-5406 | AIR DATA TEST SET WITH ACCESSORY KITS( ADAPTORS PLUS HOSES) FOR A320/A321 FLEET | 1 | |
| AD56599-1 | ADAPTER, CONNECTOR BACKSHELL | 1 | |
| AD967-47M | Pitot Static Accessory Adapter Kit for Boeing 747-400 | 3 | |
| ADA214ST-612 | Air Data Accessory Kit for Bell 412 Helicopter | 1 | |
| ADA235/295-945 | PITOT/STATIC ACCESSORIES KIT ADAPTORS | 3 | |
| ADA330-340-945 | AIR DATA ACCESSORY KIT (BAR TYPE STATIC TEST ADAPTER) | 5 | |
| ADA412-723 | ACCESSORIES KIT (AIR DATA TEST SET ADAPTERS) | 4 | |
| ADA60A-612 | ADAPTER SET,TEST KIT BLACKHAWKCAGE CODE: 38002 | 1 | |
| ADA737-678 | COM-1916 ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT, PN ADA737-678) 737-600, -700, -800 | 13 | |
| ADA767HT-612 | ACCESSORY KIT - AIR DATA, 767 (PITOT/STATIC ADAPTERS, HOSES, ETC.) | 5 | |
| ADAEH101-945 | AIR DATA ACCESSORIES KIT FOR SH-101A HELICOPTER | 2 | |
| ADAPT0R3-4-1-2 | ADAPTOR.3/4-1/2.FACOM.S.232B. | 1 | |
| ADBJ20-E1-BJ79 | ADAPTER BNC JACK TRB JACK ST | 3 | |
| ADPL11-0215 | Honeywell SSCVR CVR Rack Adaptor & Download Cable | 1 | |
| ADPL11-0247 | ARINC-757 CVR Rack Adaptor | 1 | |
| ADSE-650 | ADSE 650 WIFI HANGAR AND TARMAC PS AND PT TESTER | 4 | |
| ADTS204-3435-07-M0 | AC/DC ADAPTER | 1 | |
| AE27001 | ADAPTER BACKLASH GSE195, EMB | 1 | |
| AED70US24 | POWER SUPPLY ADAPTERS AC/DC,OUTPUT 24V/3.0A INPUT 100-240V/1.5A | 2 | |
| AF-5009 | SPECIAL SURFACE PROBE, -3 PER 747 PT6 53-30-18 PG2, 737 PT6 53-30-22 PG1, 25-100KHZ, .2 DROP | 1 | |
| AF-5127-EXT/4F | PROBE EXTENSION HANDLE, FEMALE RECEPTACLE 4 PIN FISCHER TO 4 PIN FISCHER, 8" LONG Includes Test Report and Certificate of Conformance | 1 | |
| AF120 | RECEPTACLE / AFCI BREAKER TRIPPER (GROUND FAULT INDICATOR TESTER) | 1 | |
| AF151-06 | RACCORD 1/4ÕÕ NPT TO 1/4 BSP (HOSE 1/4ID) | 1 | |
| AFC-0530 | 5MHZ TOP MOUNT FINGERTIP CONTACT TRANSDUCER, .187"Ø ELEMENT, CASE SIZE: .25"Ø x .625"L. USED WITH NDT6030P. 767 PT 4 57-50-10 PAGE 15. | 1 | |
| AFC-1025HST | Contact Transducer, 10 MHz, 0.25 in. Element Diameter, Fingertip Case Style, Topt Microdot Connector..(.500" H x .390"OD) | 1 | |
| AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/MAG | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2129/BASE | EDM notch in each hole: thru the thickness, depth and width in according with SPM 32-09-01 figure 64. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3015 | EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3022 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6 ... | 1 | |
| AFNDT-3023 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7050-T74 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6... | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3055 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4330 STE... | 1 | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | 1 | |
| AFNDT-3137AL | 14 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole Per Boeing B737 PT 6 51-00-00 Prodedure 1 | 1 | |
| AFNDT-3139AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3139CS | 11 HOLE REFERENCE STANDARD in 4130 Carbon Steel; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3139TI | 11 HOLE REFERENCE STANDARD in 6AL-4V Titanium; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 ... | 1 | |
| AFNDT-3140AL | 7 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 FIG 3, 14 Notches Tota... | 1 | |
| AFNDT-3148AL | 13 HOLE REFERENCE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" & 1". THRU EDM NOTCHES IN EACH HOLE, Depth: 0.040" +/- 0.001 x Width : 0.005" + 0 - 0.002". Includes Certification R... | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3160AL-2 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T6 ALUMINUM, SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of ... | 1 | |
| AFNDT-3160CS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 4130/4340 CRES STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3160SS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3215AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 5/32", 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" a... | 1 | |
| AFNDT-3229AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" and 0.02... | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3253CS | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 4340 or 4130 Carbon Steel. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate | 1 | |
| AFNDT-3253TI | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3280 | Surface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm, Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includeds .020" thick shim and Key Ring. Supplie | 1 | |
| AFNDT-3338/17-4 | Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.005", 0.010" and 0.020" inches +/-.001 (0.127mm, 0.254mm and .508mm), Notch Width: .004" +/-.001" Wide EDM notches, .005" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3457 | EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008", .020", .040". NOTCH WIDTH: (.004"W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1. | 1 | |
| AFNDT-3499 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 4 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .005", .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4... | 1 | |
| AFNDT-3500/MAG | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020", 0.030 and 0.040" inches (0.2mm, 0.51mm, 0.76mm and 1.02mm). Reference standard overall dImensions 1 X 5 X 0.25 inches (2.54cm X 12.7cm X 6.35mm). EDM notches .007" W MAX Inclu | 1 | |
| AFNDT-3507 | Custom 2 hole BOEING REFERENCE STANDARD MANUFACTURED PER 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Includes Test Report and Certificate of Conformance. ....HOLE SIZES: 0.344" (11/32''),0.562"... | 1 | |
| AFNDT-CRJ200/CRS | SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008", .020", .040" EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL...CRJ200 PART1 51-20-06 PG.9 | 1 | |
| AGE 04510-401 | JACKING ADAPTER SET | 3 | |
| AGE-00017-401 | Main gear jack adapter | 1 | |
| AGE-00046-401 | Nose Gear Jack Adapter | 1 | |
| AGE-00313-401 | ADAPTER BACKLASH | 4 | |
| AGE-00313-403 | ADAPTER BACKLASH | 5 | |
| AGE-01421-401 | KIT - JACKING ADAPTER | 1 | |
| AGE-01421-4011 | KIT - JACKING ADAPTER | 1 | |
| AGE-01468-401 | KIT-JACK ADAPTER | 2 | |
| AGE-01987-401 | COVER - PROT, EXT AC POWER RECEPTACLE | 4 | |
| AGE-04134-401 | Adapter Set,Backlash Me | 9 | |
| AGE-04162-401 | ADAPTER, HYDRAULIC JACK | 1 | |
| AGE-04363-401 | KIT - JACKING ADAPTER | 9 | |
| AGE-04364-405 | JACK PAD ADAPTER SET | 1 | |
| AGE-04510-401 | ADAPTER, SET JACKING | 3 | |
| AGE-04511-401 | ADAPTER: JACK,SS,ASSEMBLY, | 2 | |
| AGE-04718-401 | ADAPTER SET-MEAS, TAP BACKLASH | 4 | |
| AGE-04890-401 | Adapters - Set Jacking Aircraft | 2 | |
| AGE-04944-001 | PHENOM 300 WING JACK ADAPTERS | 2 | |
| AGE-05315-401 | Adapters - Meas Horizontal Tail Backlash | 1 | |
| AGE-05315-401-REVB | ADAPTERS - MEAS HORIZ TAIL BACKLASH | 1 | |
| AGE00046-401 | NOSE GEAR JACK ADAPTER | 1 | |
| AGE01421-401 | KIT - JACKING ADAPTER | 1 | |
| AGE04363-401 | KIT JACKING ADAPTER E195 | 9 | |
| AGE04510-401 | ADAPTER: JACK,HYD,SET, | 3 | |
| AGE11714 | ADAPTER ASSEMBLY, BACKDRIVE INSEP. | 2 | |
| AGE15011 | ADAPTER - ACM TORQUE CHECK | 5 | |
| AGE15071-5 | RECEPTACLE, AMPH, MS3120F10-6P | 1 | |
| AGE15074-1 | RECEPTACLE, ITCAN, MS3120F14-5P | 1 | |
| AGE17073 | ADG BACKDRIVE ADAPTER | 3 | |
| AGE70018 | CABLE INTERFACE ADPT | 5 | |
| AGE70216 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER (25 FT CABLE RS485 TO RS232) | 9 | |
| AGE70637 | DMM INTERFACE ADAPTER | 1 | |
| AGE‐04363‐401 | Kit‐Jacking Adapter | 9 | |
| AGG01468-401 | JACK ADAPTOR | 1 | |
| AGS3108D | Jack Pad Adapter | 1 | |
| AH-45-CPT-T5 | DESOUTTER AH-45-CPT-T5 COMPACT 45 DEGREE ANGLE HEAD | QUICK RELEASE | 3/16" COLLET SPINDLE | 1 | |
| AJ1261/TMH-MA02-00-00 | Adaptor Main Landing Gear Jack | 1 | |
| AK737-900 | KIT - AIR DATA ACCESSORY (737-NG, EXCEPT 737-700C, -700QC) | 2 | |
| AK747HT | ACCESSORY KIT - AIR DATA (PITOT/STATIC ADAPTERS, HOSES, ETC.) | 2 | |
| AKDH8-123 | ADAPTER Q300 ACCESSORY KIT | 1 | |
| AKDH8-4 | ADAPTER Q400 ACCESSORY KIT | 1 | |
| AKGV-04 | Pitot Static Accessory/ Adapter Kit Gulfstream V / G500 / G55 | 1 | |
| AKMD10 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-10 | 1 | |
| AKMD11 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-11 | 1 | |
| AL1216 | ACCEPTANCE GAGE | 1 | |
| ALT29000001 | HPU 3 PHASE / 380VAC / 50HZ COMPLETED WITH ADAPTOR COUPLING KIT | 1 | |
| AM-2228-C8 | BRACKET BOTTLE ADAPTOR V2500 QTY 2 | 1 | |
| AM24562. | DRIVE BLOCK EXTRACTOR ADAPTOR. | 3 | |
| AN16-B1-R | ADAPTOR - REFLECTION 16 PIN PLUG (NORTEC 500/600 INTRUMENT) TO B1 ELOTEST 8 PIN FISCHER RECEPTACTLE (GE/HOCKING INTRUMENT) Includes Test Report and Certificate of Conformance | 1 | |
| AN16-P2D-B | ADAPTOR - BRIDGE CONNECTION, 16 PIN PLUG (NORTEC 500/600, 2000 SERIES INTRUMENTS TO 12 PIN LEMO RECEPTACTLE FOR GE/HOCKING INTRUMENTS Includes Certificate of Conformance | 1 | |
| ANDT1015 | BOEING REFERENCE STANDARD 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1049 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN5-2, BACR15CE5D-2, BACR15ET7D-2). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1050 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN5-2, BACR15CE5D-2, BACR15ET7D-2). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1051 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN6-2, BACR15CE6D-2, BACR15BB8D-2). Includes Test Report and Certificate of Conformance. | 4 | |
| ANDT1052 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-2, BACR15CE8D-2, BACR15BB8D-2). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1053 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 FASTENER (BACB30FN8-3, BACR15CE8D-3, BACR15BB8D-3). Includes Test Report and Certificate of Conformance. | 5 | |
| ANDT1054 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-3, BACR158D-3, BACR15BB8D-3). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1055 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1056 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). Includes Test Report and Certificate of Conformance. | 4 | |
| ANDT1057 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1077 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN5-2, BACR15CE5D-2, BACR15ET7D-2). Includes Test Report and Certificate of Conformance. | 4 | |
| ANDT1079 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. Includes Test Report and Certificate of Conformance. FASTENER (BACR15BB5AD-4, BACR15BB6AD-4, BACR15BB7AD-4, BACR15BB8AD-4, ALL ALODINE) | 4 | |
| ANDT1080 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. Includes Test Report and Certificate of Conformance. FASTENER (BACR15BB5AD-4, BACR15BB6AD-4, BACR15BB7AD-4, BACR15BB8AD-4, ALL ALODINE) | 2 | |
| ANDT1081 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. FASTENER (BACR15BB5AD-5, BACR15BB6AD-5, BACR15BB7AD-5, BACR15BB8AD-5, ALL ALODINE). Includes Test Report and Certificate of Conformance. | 2 | |
| ANDT1082 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. FASTENERS: (BACR15BB5AD-5, BACR15BB6AD-5, BACR15BB7AD-5, BACR15BB8AD-5, ALL ALODINE). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT3016-B | BOEING REFERENCE STANDARD 737 PT 6 53-10-54 FIG 2 FASTENER (BACB15BB5D-4, ALL ALODINE). Includes Certification Report and Certificate of Conformance. | 4 | |
| ANDT4126 | BOEING REFERENCE STANDARD PT 6 53-30-00 FIGURE 6 PAGE 5 & 757 53-30-05 PT 6 FASTENER (BACR15CE6, ALL ALODINE). Includes Test Report and Certificate of Conformance. | 2 | |
| AO111248 | Drive block extractor adaptor | 1 | |
| AP2D-N16-B | ADAPTOR - 12 PIN MALE PLUG TO 16 PIN FEMALE RECEPTACLE, BRIDGE. Includes Test Report and Certificate of Conformance | 1 | |
| AP2D-N16-R | ADAPTOR - 12 PIN MALE PLUG TO 16 PIN FEMALE RECEPTACLE, REFLECTION. Includes Certificate of Conformance. | 1 | |
| AP42900-1 | FRONT FACE ADAPTOR | 1 | |
| APEX-GSV1T-SUB-LIC-10PK | APEX-GSV1T-SUB-LIC-10PK;APEX-GSV1T Cloud Monitor - Annual Subscription License - 10 Pack | 1 | |
| APEX-GSV1T-SUB-LIC-20PK | APEX-GSV1T-SUB-LIC-20PK;APEX-GSV1T Cloud Monitor - Annual Subscription License - 20 Pack | 1 | |
| APEX-GSV1T-SUB-LIC-30PK | APEX-GSV1T-SUB-LIC-30PK;APEX-GSV1T Cloud Monitor - Annual Subscription License - 30 Pack | 1 | |
| APEX-GSV1T-SUB-LIC-5PK | APEX-GSV1T-SUB-LIC-5PK;APEX-GSV1T Cloud Monitor - Annual Subscription License - 5 Pack | 1 | |
| APEX-STD-MACS-3YEAR | APEX-STD-MACS-3YEAR;APEX STANDARD Annual 3-year Subscription for Azure Cloud | 1 | |
| APEX-STD-MACS-ANNUAL | APEX-STD-MACS-ANNUAL;APEX STANDARD Annual 1-year Subscription for Azure Cloud | 1 | |
| APEX-STD-MACS-PERPETUAL | APEX-STD-MACS-PERPETUAL;APEX STANDARD Perpetual Subscription for Azure Cloud | 1 | |
| APEX-WG-MACS-3YEAR | APEX-WG-MACS-3YEAR;APEX WORKGROUP Annual 3-year Subscription for Azure Cloud | 1 | |
| APEX-WG-MACS-ANNUAL | APEX-WG-MACS-ANNUAL;APEX WORKGROUP Annual 1-year Subscription for Azure Cloud | 1 | |
| APEX-WG-MACS-PERPETUAL | APEX-WG-MACS-PERPETUAL;APEX WORKGROUP Perpetual Subscription for Azure Cloud | 1 | |
| API SET | (OPTIONAL ITEM) FOR STB100 BEACON TEST BENCH | 1 | |
| APM3900 | TOW ADAPTER (MANUFACTURER JBT LEKTRO) | 1 | |
| AQS-2009 | CONNECTOR,RECEPTACLE,ELECTRICAL | 1 | |
| ARINC-757 | CVR RACK ADAPTOR | 1 | |
| ARR-RAFX-12 | STAINLESS STEEL FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN STEP LEMO TO RECEPTACLE (FEMALE) STEP LEMO CONNECTOR. 12.0" WORKING LENGTH. Includes Certificate of Conformance | 1 | |
| ARS-0812S | Surface reference standard, 17-4PH Steel, with EDM notch depths of 0.008", 0.010" and 0.020" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc | 1 | |
| ARS-0824-7050 | Surface reference standard, 7050-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7050T74 | Surface reference standard, 7050-T74 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7075T6 | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824-7075T7 | Surface reference standard, 7075-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824-7075T73 | Surface reference standard, 7075-T73 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024-T3 | Surface reference standard, 2024-T3 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/2024-T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/4330 | Surface reference standard, 4330 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inches | 1 | |
| ARS-0824/6061T6 | Surface reference standard, 6061-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/7475-T7 | Surface reference standard, 7475-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824A | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824I | Surface reference standard, Inconel 718, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824M | Surface reference standard, Magnesium, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824S | Surface reference standard, 4340 Steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 inc... | 1 | |
| ARS-0824SS | Surface reference standard, 304 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001" | 1 | |
| ARS-0824SS/316 | Surface reference standard, 316 Stainless steel, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM NOTCHES .005" W +/-.001" | 1 | |
| ARS-0824T | Surface reference standard, 6AL-4v Titanium, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.2... | 1 | |
| ARS-1S | Surface reference standard, 4340 or 4130 steel, with EDM notch depth of 0.010" x .005" wide Reference standard overall dImensions 1.0" X 3.0" X 0.25" inches .007" W MAX. Includes Certification traceable to NIST. | 1 | |
| ARTS-7000 | ARTS-7000 NAVCOM&PULSE (WITH TCAS OPTION ANTENNA COUPLER(ACCESSORIES)) COUPLER(ACCESSORIES)) | 3 | |
| AS5233W05 | CAP RECEPTACLE | 1 | |
| ASL08155W09-01 | ADAPTOR-SREW JACK, OIL SERVICE | 1 | |
| ASPIRE 5349 | ACER LAPTOP | 1 | |
| AST27A023 | BACKLASH ADAPTOR | 1 | |
| AST4236-8-2 | ACTUATOR ADAPTER ASSEMBLY | 1 | |
| AT4055500-905 | MCDU ACCEPTANCE TEST SOFWARE DISK | 1 | |
| AT4055500-906 | MCDU ACCEPTANCE TEST SOFWARE DISK | 1 | |
| AT4055500-907 | MCDU ACCEPTANCE TEST SOFWARE DISK | 1 | |
| AT540 | COLLAR DEPTH ACTUATOR | 5 | |
| AT540SE-5 | ¼ HEX RECEPTACLE | 1 | |
| ATE-001 | JACK ADAPTER 6 TN MEGA | 1 | |
| ATI260A90 | RECEPTACLE | 1 | |
| ATI540BL-7 | HEX RECEPTACLE (OAL 7-1/2”) | 1 | |
| ATI540BS-5 | HEX RECEPTACLE (OAL 5-1/2”) | 2 | |
| ATRNLEGPINEXTRACT0R | EXTRACTOR SEE PT NO H21968 | 1 | |
| ATS050-P120 | AC ADAPTER FOR IPLEX RX | 1 | |
| AUR-URFX-10 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN FISCHER TO RECEPTACLE (FEMALE) 10.0" WORKING LENGTH. Includes Certificate of Conformance. | 1 | |
| AUR-URFX-12 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN FISCHER TO RECEPTACLE (FEMALE) 12.0" WORKING LENGTH. Includes Certificate of Conformance. | 1 | |
| AUR-URFX-20 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN FISCHER TO RECEPTACLE (FEMALE) 20.0" WORKING LENGTH. Includes Certificate of Conformance. | 1 | |
| AUR-URFX-4 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN FISCHER TO RECEPTACLE (FEMALE) 4.0" WORKING LENGTH. Includes Certificate of Conformance. | 1 | |
| AUR-URFX-6 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN FISCHER TO RECEPTACLE (FEMALE) 6.0" WORKING LENGTH. Includes Certificate of Conformance. | 1 | |
| AUR-URFX-8 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN FISCHER TO RECEPTACLE (FEMALE) 8.0"(203mm) WORKING LENGTH. Includes Certificate of Conformance. | 1 | |
| AV1000A | HELICOPTER SERVICING TOOLS-CLEANER, VACUUM | 2 | |
| AVX-10K-STACAN | AVX-10K-STACAN;TACAN Option | 1 | |
| AZ1242 | RACOR EN T HEMBRA 3/8 NPT | 1 | |
| AZ421 | KODAK PIXPRO DIGITAL CAMERA, Li-Ion Battery 4 GB SD CARD / inside of Camera, USB Battery Charger Data Sync Cable Cord, AC Adapter Power Plug | 1 | |
| A−C148659−1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
| B07001 | ADAPTER -0 JACKING, FORWARD BODY | 1 | |
| B07001-1 | Adaptor Jacking | 1 | |
| B07001-7 | ADAPTER - JACKING, FORWARD BODY | 15 | |
| B07001-7-M | ADAPTER -0 JACKING, FWD BODY | 1 | |
| B07002-1 | JACKING ADAPTER - AIRPLANE STABILIZATION | 13 | |
| B07004-12 | JACKING ADAPTER | 6 | |
| B07008 | JACKING BAR EQPT -0 MAIN LANDING GEAR AXLE | 1 | |
| B07008-1 | JACKING BAR EQPT | 4 | |
| B12004 | RECEPTACLE -0 FUEL SAMPLING | 1 | |
| B12004-1 | RECEPTACLE - FUEL SAMPLING | 22 | |
| B14057-101 | TOOL VACCUM ADAPTER | 1 | |
| B19285-1 | CHARGING ADAPTER (ZODIAC) | 1 | |
| B200004-42 | B20004-42 ADAPTER - ACCESS PANEL, LEVERAGE (SC | 1 | |
| B20001-12 | ATTACH FITTING EQPT | 1 | |
| B20001-34 | ATTACH FITTING EQPT | 3 | |
| B20004 | LEVERAGE ADAPTER EQUIPMENT - ACCESS PANEL | 1 | |
| B20004-21 | Leverage Adapter Equipment - Access Panel | 15 | |
| B20004-42 | Leverage Adapter Equipment - Access Panel | 12 | |
| B20004–42 | ACCESS PANEL LEVERAGE ADAPTER | 12 | |
| B27011-79 | Instl/Rmvl Eqpt - Horizontal Stabilizer Jackscrew | 18 | |
| B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27034 | CHECKING EQPT-JACKSCREW BACKLASH,HORIZONTAL STABILIZER | 1 | |
| B27034-1 | CHECKING EQPT-JACKSCREW | 11 | |
| B27034-1-M | CHECKING EQPT-JACKSCREW | 1 | |
| B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | 1 | |
| B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 7 | |
| B29001-23 | Adapter Ram Air Turbine To Jack | 14 | |
| B300G7 | B300HOTELG871-01\GETAC LAPTOP | 1 | |
| B32007-1 | Sling Eqpt - Retract Actuator, NLG | 12 | |
| B32008 | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | 1 | |
| B32008 REV B | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | 1 | |
| B32008-1 | HOIST ADAPTER - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 6 | |
| B32010-4 | LOCK EQUPT. - DOOR ACT. - MLG | 1 | |
| B32012-32 | BOX LOCK EQPT DOOR ACUCTOR MAIN LANDING GEAR | 6 | |
| B32012-45 | LOCK EQPT -0 MLG DOOR ACTUATOR | 23 | |
| B32013-17 | ACTUATOR LOCK EQPT | 17 | |
| B32013-17-M | ACTUATOR LOCK EQPT | 1 | |
| B32030 | FIXTURE -0 LOCK ACTUATOR, OVERHAUL EQPT, NLG | 1 | |
| B32030-1 | Fixture-lock actuator，overhaul eqpt，NLG | 3 | |
| B32031 | TORQUING EQPT -0 RETRACT ACTUATOR, NLG | 1 | |
| B32031-1 | KIT ADAPTER ACT RETR | 1 | |
| B32031-34 | ADAPTER TORQUE ACTUA | 3 | |
| B32031-8 | ADAPTER ACT RETRACT | 3 | |
| B32036 | ADAPTER -0 ACTUATOR, LANDING GEAR TRUCK | 1 | |
| B32036-1 | ADAPTER - ACTUATOR, LANDING GEAR TRUCK POSITIONER | 3 | |
| B32040 | BUILD-UP EQPT -0 ACTUATOR, NOSE GEAR STEERING | 1 | |
| B32040-35 | Build-upeqpt-actuator，nose gear steering | 1 | |
| B32040-36 | Build-upeqpt-actuator，nose gear steering | 1 | |
| B32040-37 | Build-upeqpt-actuator，nose gear steering | 2 | |
| B32043 | HANDLING EQPT MLG DOOR&AC DOOR | 1 | |
| B32043-1 | HANDLING EQPT. MLG DOOR & AC DOOR | 9 | |
| B32057 | OVERHAUL EQPT -0 RETRACT ACTUATOR ASSEMBLY, MLG | 1 | |
| B32057-1 | Overhaul eqpt-retract actuator assembly，MLG | 1 | |
| B32057-35 | Adapter - Aircraft Jacking Point | 1 | |
| B32063 | TEST FIXTURE EQPT -0 AUTOBRAKE ACTUATOR | 1 | |
| B32071-1 | HOIST ADAPTER EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 5 | |
| B362-04180A | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-06192-1 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-0911 | ULB BATTERY, TORQUE ADAPTER (TELEDYNE BENTHOS, ELP-362D BEACONS) | 1 | |
| B362-09111 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 5 | |
| B52004-1 | ADAPTOR - No.1 & No. 2 CARGO DOOR ROTARY ACT. | 24 | |
| B52008 | ADAPTER CLOCKING NUMBER 1 & NUMBER 2 CARGO DOOR ROTARY ACTUATOR | 1 | |
| B52008-1 | ADAPTER - CLOCKING, NUMBER 1 AND 2 CARGO DOOR ROTARY ACTUATOR | 5 | |
| B52014 | REPLACEMENT EQPT -0 BULK CARGO DOOR | 1 | |
| B52014-1 | REPLACEMENT EQPT-BULK | 3 | |
| B54013 | SLING EQPT -0 DIAGONAL BRACE UNLOAD, PW2000 | 1 | |
| B54013-38 | SLING EQPT - DIAGONAL BRACE UNLOAD, PW2000 SERIES ENGINE | 4 | |
| B54013-48 | SLING EQPT - DIAGONAL BRACE UNLOAD, PW2000 SERIES ENGINE | 4 | |
| B54019-23 | Adapter Equipment -Strut Unload. Forward Engine Mount (Pw2000- 115Vac) | 6 | |
| B54019-24 | Adapter Equipment -Strut Unload. Forward Engine Mount (Rb211 - 115Vac) | 6 | |
| B54019-40 | Adapter Equipment -Strut Unload. Forward Engine Mount (Pw2000 - 220Vac) | 5 | |
| B54019-41 | Adapter Eqpt (220VAC 50HZ) | 5 | |
| B57003-9 | ADAPTER RETRACTION ASSY | 1 | |
| B71044 | TORQUE ADAPTER ACCESS LATCHES DOOR NACLE STRUT | 1 | |
| B78010-28 | Stand-functional test eqpt locking&non-locking thrust reverser actuator | 12 | |
| B78013-1 | Overhaul Eqpt - Thrust Reverser Lkng Actuator Assy | 6 | |
| B78013-2 | OVERHAUL EQPT -0 T/R LOCKING ACTUATOR ASSY | 3 | |
| B78017-1 | Installation eqpt-bearing-lead screw T/R non-locking actuator assy | 9 | |
| BACR11AV5B | RECEPTACLE | 1 | |
| BACR11AV5R | RECEPTACLE | 1 | |
| BACR11X5R | RECEPTACLE | 1 | |
| BAT-MIX01 | HAND DRILL MACHINE ADAPTER | 2 | |
| BCREFD90007 | DISPATCH EQPT - HYDRAULIC SPOILER ACTUATORS, OUTBOARD | 1 | |
| BD500281001K93-TFIX01 | ACT CAP AND ADAPTOR TEST KIT | 1 | |
| BENCH VISE | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| BH27956 | TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 1 | |
| BJP1-29A | HONDA ACURA BALL JOINT ADAPTOR | 1 | |
| BLACK PAIL | BLACK EMPTY PAIL 20L | 1 | |
| BLPAFM1234 | IMPACT ADAPTOR, 1/2"F X 3/4"M | 1 | |
| BLPAFM1438 | SOCKET ADAPTOR (M) ¼”X3/8” | 2 | |
| BLPAIM134 | IMPACT ADAPTER, SIZE (M) 1" TO (F) 3/4" | 1 | |
| BLPAIM341 | IMPACT ADAPTOR, 3/4" MALE X 1" FEMALE | 1 | |
| BM403 | BAROMETRIC PRESSURE SWITCH TEST BOX & ADAPTER HARNESS (HEWLETT-PACKARD MODEL 1862-C MEGGER MODEL BM403) | 1 | |
| BOGERT 30M-AJM | JACK BOTTLE WITH FLAT ADAPTER PAD | 1 | |
| BT-SCRIPTSUPPT1 | BT-SCRIPTSUPPT1;Service BT Support Contract for BT Custom Script | 1 | |
| BT200-2000Y | BEACON TESTER WITH HIGH STABILITY OPTION | 1 | |
| C067-00-0493 | FINAL ACCEPTANCE GAGE | 1 | |
| C067-12-0055 | FINAL ACCEPTANCE GAGE | 1 | |
| C07002 | JACK ADAPTER | 1 | |
| C07002-1 | Wing Jack Adapter | 29 | |
| C07002-2 | Wing Jacking Adapter | 10 | |
| C07002-5 | SPACER ADAPTER JACK | 1 | |
| C07004 | JACK ADAPTER | 1 | |
| C07004 - 1 | JACKING ADAPTOR - AFT BODY | 24 | |
| C07004-1 | AFT BODY JACK ADAPTO | 24 | |
| C07004-1 / C07004-2 | JACKING POINT ADAPTER AFT BODY | 1 | |
| C07004-2 | ADAPTER JACK FUSELAG | 10 | |
| C07004-2 / C07004-1 | JACKING POINT ADAPTER AFT BODY | 1 | |
| C07007 | FWD FUSELAGE JACK (AUXILIARY JACK / STEADY / OPTIONAL USE ALONE TO JACK NLG ONLY I.E NLG OLEO SEAL CHANGE) | 1 | |
| C07007 - 19 | JACKING ADAPTOR - NOSE | 19 | |
| C07007-1 | Forward Body Jack Adapter | 14 | |
| C07007-11 | JACKING ADAPTER FWD BODY | 8 | |
| C07007-11 | FORWARD BODY JACK ADAPTER | 8 | |
| C07007-12 | JACKING ADAPTER FWD BODY | 5 | |
| C07007-17 | ADAPTER, JACK - FWD BODY | 1 | |
| C07007-19 | FORWARD BODY JACK ADAPTOR | 19 | |
| C07007-19 | FORWARD BODY JACK ADAPTER | 19 | |
| C07007-2 | JACK ADAPTOR NOSE | 1 | |
| C07007-23 | ADAPTER, JACK, FWD B | 1 | |
| C07008-21 | Restraint Eqpt - Outboard Trailing Edge Flap Track | 2 | |
| C077002-1 | MLG JACK ADAPTER | 1 | |
| C12005-6 | OIL GUN-TE FLAP ACT BALLSCREW,HAND OPTED | 7 | |
| C21003 | BACKFLUSH EQPT. AjC PACK HEAT EXCHANGER | 6 | |
| C21003-1 | Backflush Eqpt-Ac Pack Heat Exchanger | 1 | |
| C21003-133 | Backflush Eqpt - AC Pack Heat Exchanger | 12 | |
| C21003-134 | Backflush eqpt-A/C pack heat exchanger | 6 | |
| C21003-135 | Backfluch Eqpt - Air Conditioning | 12 | |
| C21003-155 | EQPT - BACKFLUSH, A/C PACK HEAT EXCHANGER | 8 | |
| C21003-155 | BACKFLUSH EQPT - A/C PACK HEAT EXCHANGER | 8 | |
| C21003-156 | BACKFLUSH EQPT - AIR CONDITIONING PACK HEAT E | 8 | |
| C21003-160 | Backflush eqpt-A/C pack heat exchanger | 10 | |
| C21003-161 | Backflush eqpt-A/C pack heat exchanger | 8 | |
| C21003-161 | BACKFLUSH EQPT - A/C PACK HEAT EXCHANGER | 8 | |
| C21003-166 | BACKFLUSH EQPT | 2 | |
| C21003-45 | Backflush Eqpt | 3 | |
| C21003-45-M | BACKFLUSH EQPT | 1 | |
| C21003-53 | Back Flush Eqpt | 1 | |
| C21003-53-M | BACKFLUSH EQPT | 1 | |
| C21003-70 | BACKFLUSH EQPT | 1 | |
| C21003-71 | BACKFLUSH EQPT | 3 | |
| C21003-72 | BACKFLUSH EQPT | 4 | |
| C21003-72-M | BACKFLUSH EQPT | 1 | |
| C21003-80 | Backflush eqpt-A/C pack heat exchanger | 6 | |
| C21003-80 | BACKFLUSH EQPT - A/C PACK HEAT EXCHANGER | 6 | |
| C21003-81 | BACFLUSH EQPT | 6 | |
| C21003-82 | Backflush eqpt-A/C pack heat exchanger | 3 | |
| C21004-1 | JACK ADAPTER- INSTL /REMOVAL, AIR CONDITIONING | 1 | |
| C21005 | HOIST ADAPTER-AIR CONDITIONING PACK | 1 | |
| C21005-1 | Hoist Adapter - Air Conditioning Pack | 3 | |
| C21005-1/70 | HOIST ADAPTER - AIR CONDITIONING PAC | 1 | |
| C21005-62 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 3 | |
| C21005-70 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 9 | |
| C21006-7 | VALVE DEACTIVATOR EQPT | 10 | |
| C21007-1 | Diagnostic Eqpt - AC System, Mixed Manifold | 1 | |
| C22971 | ADAPTOR-JACK | 5 | |
| C23002-1 | ACOUSTIC COUPLER EQPT | 5 | |
| C2400-31 | JACK ADAPTER | 18 | |
| C2400-78 | JACK ADAPTER IDG | 1 | |
| C24002 | IDG JACK ADAPTER | 2 | |
| C24002-1 | JACK ADAPTER | 1 | |
| C24002-31 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 1 | |
| C24002-39 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 5 | |
| C24002-40 | JACK ADAPTER -0 IDG | 4 | |
| C24002-41 | IDG JACK ADAPTER | 6 | |
| C24002-41-M | JACK ADAPTER | 1 | |
| C24002-45 | JACK ADAPTER - IDG | 2 | |
| C24002-46 | JACK ADAPTER IDG | 2 | |
| C24002-68 | Jack Adapter Assy | 2 | |
| C24002-69 | JACK ADAPTOR ASSY | 1 | |
| C24002-70 | JACK ADAPTER | 1 | |
| C24002-70-F | JACK ADAPTER | 1 | |
| C24002-77 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 14 | |
| C24002-77 | JACK ADAPTOR-VSCF AND IDG BEOING 737-800 | 14 | |
| C24002-78 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 16 | |
| C24002-78 | JACK ADAPTER | 16 | |
| C24002-79 | Jack Adapter Assy | 1 | |
| C24002-80 | Jack Adapter Assy | 2 | |
| C24005-45 | ADAPTER JACK VSCF GE | 1 | |
| C27008 | LOCK EQPT ACTUATION CONTROL FLAP | 1 | |
| C27008-14 | Lock Eqpt Flap Actuator | 4 | |
| C27008-20 | Lock Eqpt - Actuation Control Flap | 10 | |
| C27008-22 | Lock Eqpt - Actuation Control - Flap | 17 | |
| C27019-1 | Tab Bending Eqpt-Locking Washer-Le Slat Actuator | 3 | |
| C27025-1 | Torque Wrench Eqpt - Rudder PCU Attachment | 11 | |
| C27030-2 | TEST EQPT- FLAP SCREW BACKLASH | 7 | |
| C27030-33 | Test Eqpt-Flap Screw Backlash | 18 | |
| C27030-35 | TEST EQUPT. FLAPBACK | 1 | |
| C27030-49 | Test Eqpt-Flap Screw Backlash | 8 | |
| C27030-94 | Test Eqpt - Flap Screw Backlash | 18 | |
| C27040 | HOIST ADAPTER-INSTL/REMOVAL.FLAP TRACK | 1 | |
| C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 6 | |
| C27040-29 | Hoist Adapter - Installation/Removal, Flap Track (CE) | 5 | |
| C27042-1 | TORQUE WRENCH EQPT. RUDDER PCU ATTACH | 16 | |
| C27042-2 | WRENCH-TRQ EQPT RUDDER PCU ATTACHMENT | 1 | |
| C27048-1 | VISE ADAPTER EQPT- ACTUATOR, L.E. FLAP | 1 | |
| C27050 | HANDLING EQPT REM/INSTL STAB JACKSCREW | 1 | |
| C27050-125 | Handling Eqpt - Rmvl/Instl Stab Jackscrew | 9 | |
| C27050-32 | HANDLING EQPT - JACKSCREW, STABILIZER R/I | 8 | |
| C27050-36 | ACTUATOR HND EQPT | 1 | |
| C27050-82 | Handling Eqpt - Rmvl Instl Stab Jackscrew | 17 | |
| C27058-1 | Axial load eqpt-flap actuation torque brake | 1 | |
| C27059-1 | Test block eqpt-le flap and slat actuator | 3 | |
| C27061-1 | Adapter - Wrench, Flight Spoiler Actuator Power Control Unit | 6 | |
| C27065-1 | Check Eqpt-Jackscrew Backlash | 5 | |
| C27065-20 | Check eqpt-jackscrew backlasn，horiz stab | 10 | |
| C27071-1 | Positioner Eqpt - Rod End-Actuator | 3 | |
| C27072-194 | Digital Protractor Adaptor | 1 | |
| C27074-1 | Overhaul eqpt-spring stack，T.E. flap transmission | 3 | |
| C28004-1 | FUEL FEED TEST EQPT (VACUUM GAUGE) | 5 | |
| C28013-3 | Protective Eqpt - Lower Wing Panel Access Door | 12 | |
| C28013-6 | PROTECTIVE RING - WING, LOWER PANEL ACCESS DOOR (OPTIONAL GSE) | 8 | |
| C28013-7 | Protective Ring - Wing, Lower Panel Access Door (Optional Gse) | 3 | |
| C29006-27 | ADAPTER - GROUND SERVICE CONNECTION, HYDRAULIC POWER REPLACES -1 | 7 | |
| C32009-1 | Swaging Eqpt-Oversize NLG Bearing-Upper Drag Brace | 1 | |
| C32016-33 | NLG OLEO SEAL REPLACEMENT EQPT | 11 | |
| C32017 | REPLACEMENT EQPT LWR BEARING SEALS MAIN LANDING GEAR | 1 | |
| C32017-1 | REPLACEMENT EQPT | 4 | |
| C32017-43 | REPLACEMENT EQPT- | 3 | |
| C32017-52 | REPLACEMENT EQPT - MLG LWR BEARING SEALS | 5 | |
| C32017-53 | Replacement Eqpt - MLG LWR Bearing Seals | 17 | |
| C32017-67 | REPLACEMENT EQPT - MLG LWR BEARING SEALS | 5 | |
| C32034-95 | Lever Bar Receptacle | 1 | |
| C32038 | ROD END BEARING RMVLjINSTL EQPT. ACTUATORS MLG | 1 | |
| C32038-1 | ACTUATOR REPAIR EQPT | 1 | |
| C32038-1-M | ACTUATOR REPAIR EQPT | 1 | |
| C32038-1-ML | ACTUATOR REPAIR EQPT LESS | 1 | |
| C32038-55 | Rod End Bearing Rmvl Instl Eqpt - Actuators MLG | 6 | |
| C32038-81 | Rod end bearing rmvl/instl eqpt-actuators，MLG | 4 | |
| C32039-1 | Adapter - Functional Test, Nose Landing Gear Steering Actuator | 9 | |
| C32064-1 | Replacement eqpt | 4 | |
| C33001-47 | RECEPTACLE DUST CAP | 1 | |
| C33001-49 | RECEPTACLE DUST CAP | 1 | |
| C35003-1 | RETRACTION EQPT | 4 | |
| C35003-10 | Retraction Eqpt - Firing Pin, Oxygen System | 19 | |
| C35003-13 | RETRACTION EQPT | 3 | |
| C35003-20 | Retraction Eqpt - Firing Pin, Oxygen System | 10 | |
| C49004-52 | Sling Eqpt - APU - Screw Shackle | 1 | |
| C49008-1 | Adaptor Equipment - APU Jacking | 1 | |
| C49008-37 | Adapter Equipment - Auxiliary Power Unit Jacking | 11 | |
| C49008-37 | ADAPTER EQUIPMENT – APU JACKING | 11 | |
| C49010-50-CRATE | PACKAGING OPTION - CRATE | 1 | |
| C510-140 | PTFE BACK UP RING | 1 | |
| C51001-1 | JACK EQPT | 1 | |
| C51001-2 | Jack Eqpt Engine Support | 1 | |
| C5100GCAPTURE-T30-U1 | C5100GCAPTURE-T30-U1;100GigE Ethernet Packet Capture Timed Option Field Upgrade | 1 | |
| C510GCAPTURE | C510GCAPTURE;10GigE Packet Capture Test Option Software | 1 | |
| C510GCAPTURE-T30 | C510GCAPTURE-T30;10GigE Packet Capture Timed Test Option Software | 1 | |
| C510GCAPTURE-T30-U1 | C510GCAPTURE-T30-U1;10GigE Packet Capture Timed Test Option Field Upgrade Software | 1 | |
| C510GCAPTURE-U1 | C510GCAPTURE-U1;T-Berd/MTS 5800 10GigE Packet Capture Upgrade | 1 | |
| C510M1GE | C510M1GE;10/100/1000M Electrical and 100M/1GigE Optical Ethernet Interface Software | 1 | |
| C54003-1 | REM/INST EQUPT. - FUSE PIN, NACELLE STRUT | 7 | |
| C54005 | R/I EQPT-FUSE PIN,NACELLE STRUT,CFM56-3 | 1 | |
| C54005-1 | Rmvl/Instl Eqpt - Fuse Pin, Nacelle Strut | 11 | |
| C54014-1 | BEARING REPLACEMENT EQPT | 5 | |
| C57001-1 | Roller Swaging Eqpt - Hinge Bracket | 4 | |
| C5E1DS1-T30 | C5E1DS1-T30;E1/DS1 Electrical Interface Timed Option | 1 | |
| C5E3E4STM1E-T30 | C5E3E4STM1E-T30;E3/E4/STM-1E Electrical Interface Timed Option | 1 | |
| C5ETHLPBK | C5ETHLPBK;T-Berd/MTS 5800 Ethernet Loopback Test Option Software | 1 | |
| C5LSCAPTURE | C5LSCAPTURE;10/100/1000M and 1GigE Packet Capture Test Option Software | 1 | |
| C5LSCAPTURE-T30 | C5LSCAPTURE-T30;10/100/1000M and 1GigE Packet Capture Timed Test Option Software | 1 | |
| C5LSCAPTURE-T30-U1 | C5LSCAPTURE-T30-U1;10/100/1000M and 1GigE Packet Capture Timed Test Option Field Upgrade Software | 1 | |
| C5LSCAPTURE-U1 | C5LSCAPTURE-U1;T-Berd/MTS 5800 10/100/1000M and 1GigE Packet Capture Upgrade | 1 | |
| C5MACINMAC | C5MACINMAC;Ethernet Mac-In-MAC Test Option Software | 1 | |
| C5MACINMAC-T30 | C5MACINMAC-T30;Ethernet Mac-In-MAC Timed Test Option Software | 1 | |
| C5MACINMAC-T30-U1 | C5MACINMAC-T30-U1;Ethernet Mac-In-MAC Timed Test Option Field Upgrade Software | 1 | |
| C5OTU1-T30 | C5OTU1-T30;OTU1 Timed Interface Option | 1 | |
| C5OTU2-T30 | C5OTU2-T30;OTU2 Timed Interface Option | 1 | |
| C5OTU2E-T30 | C5OTU2E-T30;OTU2E and OTU1E Timed Interface Option | 1 | |
| C5TEM2-ATT | C5TEM2-ATT;ATT package TEM2 w portable antenna and adapter N-Type to SMA | 1 | |
| C5THRU-LB | C5THRU-LB;Monitor/Thru Loopback Port 2 Test Option | 1 | |
| C5THRU-LB-T30 | C5THRU-LB-T30;Monitor/Thru Loopback Port 2 Timed Option | 1 | |
| C5THRU-LB-T30-U1 | C5THRU-LB-T30-U1;Monitor/Thru Loopback Port 2 Timed Option Field Upgrade | 1 | |
| C690 60 SV NR | Ground Power Unit − AC (60 kV−A) (Diesel)(Optional) | 1 | |
| C71002-91 | The adaptation for replacement of the entrance channel | 8 | |
| C71020-25 | Bracket - Dynamometer Adapter Assy | 1 | |
| C71023-1 | IDG JACK ADAPTER | 9 | |
| C78004-2 | LOCKPIN EQPT-T/R ACTUATION | 26 | |
| C78009-2 | JACK ADAPTER | 1 | |
| C78009-20 | JACK ADAPTER | 1 | |
| C78009-40 | JACK ADAPTER ASSEMBLY | 1 | |
| C78009-73 | JACK ADAPTER ASSEMBLY | 1 | |
| C78023-1 | LOCK EQPT- T/R ACTUATOR CFM56 | 31 | |
| C78023-13 | Lock eqpt-thrust reverser actuator，cfm56-7 | 7 | |
| C78025-21 | ACTUATOR EQPT | 21 | |
| C78035-1 | OCK EQPT-THRUST REVERSEROPENING ACTUATORS，CFMLEAP-1B ENGINE/LEAP-1B | 11 | |
| C78035-14 | 15°LOCK EQPT-THRUST REVERSER OPENING ACTUATORS，CFM LEAP-1B ENGINE | 10 | |
| CA-02013A13A200-08 | RF CABLE – RG-214, 2 METRE, TYPE N MALE CONNECTORS. SHORTER IS ACCEPTABLE. | 1 | |
| CA18157T10 | RECEPTACLE REMOVAL TOOL | 4 | |
| CA30000-0001 | JACK ADAPTER | 1 | |
| CA66286-45 | RECEPTACLE | 1 | |
| CA80100-0001 | ADAPTER, JACKING RAER FUSELAGE | 2 | |
| CA80100-0003 | ADAPTER,JACKING REAR FUSELAGE | 1 | |
| CALPBK | CALPBK;OneAdvisor Layer 1 Loopback Test Option | 1 | |
| CALPBK-T1Y | CALPBK-T1Y;OneAdvisor Layer 1 Loopback 1 Year Timed Option | 1 | |
| CALPBK-T30 | CALPBK-T30;OneAdvisor Layer 1 Loopback 30 day Timed Option | 1 | |
| CALPBK-T3Y | CALPBK-T3Y;OneAdvisor Layer 1 Loopback 3 Year Timed Option | 1 | |
| CALPBK-U1 | CALPBK-U1;OneAdvisor Layer 1 Loopback Upgrade Option | 1 | |
| CAT5643-19 | UPLOCK PIN ACCEPTANCE GAUGE | 1 | |
| CAT5881-5 | TOWBAR ATTACHMENT HEAD (OPTIONAL) | 1 | |
| CB-DCCLK | CB-DCCLK;DATACOM PIM Clock Adapter Cable | 1 | |
| CELPBK-FL | CELPBK-FL;OneAdvisor Layer 1 Loopback Floating Option | 1 | |
| CESPIN | Replacement pins for Captive Eye | 1 | |
| CF-AA5713A M5 | ORIGINAL 15.6V 7.05A 110W 5.52.5MM CF-AA5713A M2 POWER CHARGER FOR PANASONIC TOUGHBOOK CF-31 CF-53 CF-52 CF-19 LAPTOP AC ADAPTER | 1 | |
| CF31CTQAZBM | PANASONIC TOUGH BOOK WITH FOLLOWING ACCESERIES:-(I) 4 PORT USB HUB,SECURING STRAP FOR LAPTOP (II) SPARE BATTERY (III) BATTERY CHARGER. FOR SPARE BATTERY (IV) PRE LOADED WINDOW OS | 1 | |
| CG9071001-0001 | JACK ADAPTER, A220 WING | 1 | |
| CG9545001-0000 | PYLON JACK ADAPTER | 1 | |
| CHA1001-031 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA1001-032 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA1056-209 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA1057-181 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA1159-027 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA141377 | SCREW/JACKHEAD END FLOAT CHECKING ADAPTER | 4 | |
| CHA1917-0050 | ACCEPTANCE GAUGE (GOODRICH ACTUATION SYSTEMS ) | 1 | |
| CHA700-224 | ADAPTER BACKLASH CHECKING | 6 | |
| CHA700-379 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA700224 | ADAPTOR ADAPTOR-BACKLASH CHECKING | 6 | |
| CHA700−224 | ADAPTER BACK LASH CK | 6 | |
| CHA701-047 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA702-052 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA707-080 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA707-099 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA709-134 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA711-174 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA719-235 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA719-249 | BACKLASH CHECKING ADAPTOR | 1 | |
| CIT-BFTA100-A02-060 | ADAPTER CABLE-FIBER OPTIC (BACC65AB2A/BACI10A) | 1 | |
| CIT-BFTA100-A03-060 | ADAPTER CABLE - FIBER OPTIC (BACC65AB2A/BACL10AL12FKAS) | 1 | |
| CIT-BFTA100-A05-060 | ADAPTER CABLE-FIBER OPTIC (BACC68F15C06N) | 1 | |
| CIT-BFTA100-A06-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR (HUD, HDD, EAFR, ACP, ADB) | 1 | |
| CIT-BFTA100-A09-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR (HUD, HDD, EAFR, ACP, ADB) | 1 | |
| CIT-BFTA100-A10-060 | ADAPTER –CABLE FIBER OPTIC (BACC65AP2E/BACI10A) | 1 | |
| CIT-BFTA100-A11-060 | ADAPTER CABLE - FIBER OPTIC (BACC65AN2E/BACI10AL12FKAS) | 1 | |
| CIT-BFTA100-A21-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CN-E/BACI10AP06FAP) | 1 | |
| CIT-BFTA100-A22-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CN-E/BACI10AP06FAS) | 1 | |
| CIT-BFTA100-A23-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CM-E/BACI10AP06FAP) | 1 | |
| CIT-BFTA100-A24-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CM-E/BACI10AP06FAS) | 1 | |
| CIT-BFTA100-A34-060 | ADAPTER CABLE - FIBER OPTIC (BACC68E15C06N) | 1 | |
| CJMD107-003 | JACK ADAPT | 3 | |
| CJMD207-003 | TOOL JACK ADAPTER | 5 | |
| CJMD207003 | JACK ADAPTER | 5 | |
| CLA41035G-06 | ADAPTOR, PUSHBACK GATEWAY CABLE | 1 | |
| CM-S-389T | BACKSHELL ADAPTOR TOOL SET , ALUMINUM (PLUG) | 4 | |
| CM-S-389TR | BACKSHELL ADAPTOR TOOL SET , ALUMINUM (RECEPTACLE) | 2 | |
| CM-S-837 | CONNECTOR/BACKSHELL ADAPTOR TOOL SET - ALUMINIUM | 3 | |
| CM264R-10 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 10 | 2 | |
| CM264R-12 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 12 | 2 | |
| CM264R-14 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 14 | 2 | |
| CM264R-16 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 16 | 2 | |
| CM264R-18 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 18 | 2 | |
| CM264R-20 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 20 | 2 | |
| CM264R-22 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 22 | 2 | |
| CM264R-24 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 24 | 2 | |
| CM264R-8 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 8 | 2 | |
| CM288R-11A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 11(A) | 2 | |
| CM288R-11B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 11(A) | 2 | |
| CM288R-13A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 13(B) | 2 | |
| CM288R-13B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 13(B) | 2 | |
| CM288R-15A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 15(C) | 2 | |
| CM288R-15B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 15(B) | 2 | |
| CM288R-17A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 17(D) | 2 | |
| CM288R-17B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 17(D) | 2 | |
| CM288R-19A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 19(E) | 2 | |
| CM288R-19B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 19(E) | 2 | |
| CM288R-23A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 23(F) | 2 | |
| CM288R-23B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 23(F) | 2 | |
| CM288R-25A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 25(G) | 2 | |
| CM288R-25B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 25(G) | 2 | |
| CM288R-29A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 29(H) | 2 | |
| CM288R-29B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 29(H) | 2 | |
| CM288R-33A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 33(J) | 2 | |
| CM288R-33B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 33(J) | 2 | |
| CM389BR-11 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 11(B) | 2 | |
| CM389BR-13 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 13(C) | 2 | |
| CM389BR-15 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 15(D) | 2 | |
| CM389BR-17 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 17(E) | 2 | |
| CM389BR-19 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 19(F) | 2 | |
| CM389BR-21 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 21(G) | 2 | |
| CM389BR-23 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 23(H) | 2 | |
| CM389BR-25 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 25(J) | 2 | |
| CM389LR-11 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 11 | 2 | |
| CM389LR-13 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 13 | 2 | |
| CM389LR-15 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 15 | 2 | |
| CM389LR-17 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 17 | 2 | |
| CM389LR-19 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 19 | 2 | |
| CM389LR-21 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 21 | 2 | |
| CM389LR-23 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 23 | 2 | |
| CM389LR-25 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 25 | 2 | |
| CM389LR-9 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 9 | 2 | |
| CM389TR-11A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 11(B) | 2 | |
| CM389TR-11B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 11(B) | 2 | |
| CM389TR-13A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 13(C) | 2 | |
| CM389TR-13B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 13(C) | 2 | |
| CM389TR-15A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 15(D) | 2 | |
| CM389TR-15B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 15(D) | 2 | |
| CM389TR-17A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 17(E) | 2 | |
| CM389TR-17B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 17(E) | 2 | |
| CM389TR-19A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 19(F) | 2 | |
| CM389TR-19B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 19(F) | 2 | |
| CM389TR-21A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 21(G) | 2 | |
| CM389TR-21B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 21(G) | 2 | |
| CM389TR-23A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 23(H) | 2 | |
| CM389TR-23B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 23(H) | 2 | |
| CM389TR-25A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 25(J) | 2 | |
| CM389TR-25B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 25(J) | 2 | |
| CM389TR-9A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 9(A) | 2 | |
| CM389TR-9B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 9(A) | 2 | |
| CM5015R-10 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 10 | 2 | |
| CM5015R-12 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 12 | 2 | |
| CM5015R-14 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 14 | 2 | |
| CM5015R-16 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 16 | 2 | |
| CM5015R-18 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 18 | 2 | |
| CM5015R-20 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 20 | 2 | |
| CM5015R-22 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 22 | 2 | |
| CM5015R-24 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 24 | 2 | |
| CM5015R-28 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 28 | 2 | |
| CM5015R-32 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 32 | 2 | |
| CM5015R-36 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 36 | 2 | |
| CM5015R-40 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 40 | 2 | |
| CM5015R-44 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 44 | 2 | |
| CM5015R-48 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 48 | 2 | |
| CM5015R-8 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 8 | 2 | |
| CM815R-10 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 10(B) | 2 | |
| CM815R-14 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 14(D) | 2 | |
| CM815R-16 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 16(E) | 2 | |
| CM815R-18 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 18(F) | 2 | |
| CM815R-20 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 20(G) | 2 | |
| CM815R-22 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 22(H) | 2 | |
| CM815R-24 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 24(J) | 2 | |
| CM815R-8 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 8(A) | 2 | |
| CM837RB-10 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 10 | 2 | |
| CM837RB-12 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 12 | 2 | |
| CM837RB-14 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 14 | 2 | |
| CM837RB-16 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 16 | 2 | |
| CM837RB-18 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 18 | 2 | |
| CM837RB-20 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 20 | 2 | |
| CM837RB-22 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 22 | 2 | |
| CM837RB-24 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 24 | 2 | |
| CM837RB-8 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 8 | 2 | |
| CMJD207-003 | CESSNA 550, AND 560 MLG JACK ADAPTOR | 1 | |
| CN0940-137 | RECEPTACLE- FUEL | 1 | |
| CO7004_1 | AFT BODY JACK ADAPTER | 24 | |
| COM-1443 | IDG JACK AND ADAPTOR ASSY | 1 | |
| COM-1568 | IDG JACK AND ADAPTOR ASSY | 1 | |
| COM-2039 | MICROMETER, OPTICAL (MIN DEPTH .02 INCH AND ACCURACY +/-.0005 INCH) | 1 | |
| CP30612 | JACKING ADAPTOR REAR SUPPOR RING | 1 | |
| CP32088 | REAR JACKING ADAPTER | 1 | |
| CP7901 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| CP7901K | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| CPN622-6104-001 | INTERFACE ADAPTER | 1 | |
| CQSFP-40G-8-4 | CQSFP-40G-8-4;QSFP+ 40G Ethernet 40Gbase-SR4 850nm 100M Single 1X12 MPO Receptacle | 1 | |
| CRKK560KXP | REDEMPTION BLACK | 1 | |
| CS-295-RC104 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| CS-295-RC124 | ADAPTER JACK MLG | 1 | |
| CS-295-RC124-A | ADAPTER, JACKING M.L.G | 1 | |
| CS-295-RC124B | ADAPTER, JACKING N.L.G | 1 | |
| CS-H21-AG105CS-05SB | Kit adaptación llave Service bulletin | 1 | |
| CSA75700HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT, PN ADA737-678) | 3 | |
| CSA77700HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 2 | |
| CT101 | RECEPTACLE / GFCI COMBINED TESTER | 1 | |
| CT10GCAPTURE-T30 | CT10GCAPTURE-T30;10GigE Packet Capture Timed Test Option Software | 1 | |
| CT10GCAPTURE-T30-U1 | CT10GCAPTURE-T30-U1;10GigE Packet Capture Timed Test Option Field Upgrade Software | 1 | |
| CT10GCAPTURE-U1 | CT10GCAPTURE-U1;TB/MTS 6000A MSAM 10G Packet Capture Field Upgrade | 1 | |
| CT22045 | ADAPTER,TEST-INTERFACE | 1 | |
| CT22046 | ADAPTER-INTERFACE TEST | 1 | |
| CTHSDATA-T30 | CTHSDATA-T30;High Speed DATACOM Timed Test Option Software | 1 | |
| CTHSDATA-T30-U1 | CTHSDATA-T30-U1;High Speed DATACOM Timed Test Option Field Upgrade Software | 1 | |
| CTL1HADELAY | CTL1HADELAY;T-Berd/MTS 6000A 8000 MSAM L1 1/10G High-Accuracy Delay Measurement Test Option Software | 1 | |
| CTL1HADELAY-T30 | CTL1HADELAY-T30;1GigE and 10GigE High-Accuracy Delay Timed Test Option Software | 1 | |
| CTL1HADELAY-T30-U1 | CTL1HADELAY-T30-U1;1GigE and 10GigE High-Accuracy Delay Timed Test Option Field Upgrade Software | 1 | |
| CTLSCAPTURE-T30 | CTLSCAPTURE-T30;10/100/1000M and 1GigE Packet Capture Timed Test Option Software | 1 | |
| CTLSCAPTURE-T30-U1 | CTLSCAPTURE-T30-U1;10/100/1000M and 1GigE Packet Capture Timed Test Option Field Upgrade Software | 1 | |
| CTLSCAPTURE-U1 | CTLSCAPTURE-U1;TB/MTS 6000A MSAM 1G Packet Capture Field Upgrade | 1 | |
| CTMACINMAC-T30 | CTMACINMAC-T30;Mac-In-MAC -Pbb- Timed Test Option Software | 1 | |
| CTMACINMAC-T30-U1 | CTMACINMAC-T30-U1;Mac-In-MAC -Pbb- Timed Test Option Field Upgrade Software | 1 | |
| CTMACINMAC-U1 | CTMACINMAC-U1;MAC In MAC Test Option Field Upgrade MTS/TB6000A MSAM | 1 | |
| CV430GT | OPTIC TACHOMETER FOR GAS TURBINES | 1 | |
| CX700-HRMK24 | CX700-HRMK24;CX700 Rack Mount Kit; 24 inch depth; 23 inch rail | 1 | |
| CX700-HRMK29 | CX700-HRMK29;CX700 Rack Mount Kit; 29 inch depth; 28 inch rail | 1 | |
| D.169 | FACOM D.169 SQUARE RATCHET ADAPTER | 3 | |
| D00RJACKCHARGEADPT | E195 DOOR JACK CHARGING ADAPTOR | 1 | |
| D07103500000 | JACK ADAPTER-FUSELAGE | 1 | |
| D14089-101 | VACUUM ADAPTER | 4 | |
| D14100-101 | VACUUM ADAPTER | 1 | |
| D14105-101 | ADAPTER, VACUUM | 1 | |
| D16707AA | ADPTATOR ARINC 565 AC | 1 | |
| D19946-101 | Adaptor - evacuating air from life raft. | 2 | |
| D22173 | TOOL, NLG JACK ADAPTOR | 2 | |
| D22326002 | JACK ADAPTOR | 3 | |
| D22326003 | ADAPTER , JACK MLG | 1 | |
| D22326004 | JACK ADAPTOR | 1 | |
| D22326004-1 | JACKS, ADAPTER | 3 | |
| D22625000 | ADAPTER, JACKING N.L.G. | 1 | |
| D22637000 | ADAPTER, JACKING MLG | 1 | |
| D228227000 | NLG JACK ADAPTER | 1 | |
| D2282700 | NLG JACK ADAPTER ATR | 1 | |
| D22827000 | ADAPTER JACK | 8 | |
| D23038000 | ADAPTER-MLG JACK | 2 | |
| D23205000 | MLG JACK ADAPTER | 3 | |
| D280-00031-000W8230-03A00 | Clack valve blank adapter for fuel jet pump | 1 | |
| D570-04022-000W8500 | Adapters for safety line bracket | 1 | |
| D60383 | TEST SET - AIR DATA; RVSM COMPLIANT; -3000 TO 80,000 FT. INCLUDES EPR; INTERNAL VACUUM AND PRESSURE SOURCES OPTIONS AVAILABLE | 1 | |
| D72D72684-111 | ADAPTOR- CVR RACK, CABLE INTERFACE (FOR HONEYWELL SSCVR) | 9 | |
| DA1321018-103 | Axle Jack Adapter | 1 | |
| DAPT65-0085-00 | PROP MANDREL ( REPLACED BY DAPT73-0010-00-IAS) | 3 | |
| DAPT65-0085-00-IAS | PROP MANDREL ( REPLACED BY DAPT73-0010-00-IAS) | 1 | |
| DAPT73-0010-00 | PROP MANDREL REPLACED BY DAPT73-0010-00-IAS | 4 | |
| DB75-108 | ADAPTER- STARTER DRAIN, ENGINE (EATON AEROSPACE) | 3 | |
| DCM1885-THUMBSCREW-REVNC | KEYWAY ADAPTER FOR DB37 BACKSHELL - THUMBSCREW | 1 | |
| DELL LATITIDE D620 | LAPTOP FOR CMC ACCESS | 1 | |
| DFM6115 | JACKING EQPT-HYDRAULIC TELESCOPING | 2 | |
| DGSAJA-1S-101 | Axle Jack Adapter | 1 | |
| DK-621-0411-P | ELECTRICAL RECEPTACLE CONNECTOR | 2 | |
| DK2-066 | ACTUATOR PROTACTOR ADAPTER | 1 | |
| DK621-0411P | ELECTRICAL RECEPTACLE CONNECTOR | 2 | |
| DMC-M-RC | RECEPTACLE DUST CAP, SQUARE | 1 | |
| DMC664A | DMC664A- Blackhawk/US Army Helicopter Electrical Connector Repair Kit | 3 | |
| DP8EPT | PANEL METER, MULTIFUNCTION, 4-DIGIT, 21 MM, 240 VAC, PLATINUM DP8EPT SERIES, 2 RELAY, USB | 1 | |
| DPG8001-200 | DIGITAL PRESSURE GAUGE, 200 PSI, -20 °C TO 60 °C, 0.25% ACCURACY, 1/4" MNPT | 1 | |
| DPXAMA26-335 | RECEPTACLE | 1 | |
| DR1412 | Sioux® Mini Air Drills (Description: 1/4" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Non-Reversible) (Add to cart: Contact us to order) (Description: 3/8" Capacity - 0.33 hp (0.25 kW)) (Rpm (no load): 2600) (Type: Keyless Non-Reversible) ( | 3 | |
| DRCADPH10-76/9100 | ADAPTER TO MATE DC MILITARY HEADSET H10-76 TO DC 9100 WIRELESS SYSTEM. ONE END 4 CONDUCTOR U-94 JACK/SWITCH. ONE END JAE CLA CONDUCTOR CONNECTOR | 1 | |
| DRT67351 | RECEPTACLE | 1 | |
| DRT67411 | Torque reaction adaptor | 1 | |
| DRT68939 | SPAMMER / TORQUE ADAPTOR MLG RETRACT ACTUATPOR | 1 | |
| DT207L | OPTICAL TACHOMETER | 2 | |
| DT600 | Analyzer - Databus, Datatrac 650H (DT650H). Includes Arinc 629 Adapter Cable To Be Used With Customer Furnished Arinc 629 Coupler. | 4 | |
| DTS8269 | AC ADAPT US | 1 | |
| DW3000 | 2 DUP RECEPTACLE PORT OUTLET | 1 | |
| DYNAVIBE GX3 | HELICOPTER TEACKING & BALANCING | 1 | |
| DZZ0011-505 | Adapters-outbd slat drive & aileron actuator hoisting | 1 | |
| DZZ0012-501 | ADAPTADOR GATO DE ALA ( WING JACKING ADAPTER ) | 1 | |
| DZZ0012-503 | WING JACK ADAPTER | 2 | |
| DZZ7020-1 | Adapters-horiz stab acme screw+gear box | 5 | |
| DZZ7022-1 | ELEVA ACT HOIST ADAPTER | 1 | |
| DZZ7053-1 | FUSELAGE JACK ADAPTER ASSY | 5 | |
| DZZ7077-1-392 | ADAPTER-MLG RETRACT CYLINDER NUT TOR | 1 | |
| DZZ7078-1-392 | ADAPTER ASSY MLG RETRACT CLYINDER | 1 | |
| DZZ7084-503 | Protractor eqpt-NLG steering | 2 | |
| DZZ7282-1 | ADAPTOR -0 MLG JACKING | 1 | |
| DZZ7320 | WING TIP JACK ADAPTER | 1 | |
| DZZ7320-1 | JACKING ADAPTER | 1 | |
| E20PWMC | E20PWMC;ADDITIONAL AC ADAPTER/CHARGER FOR MTS-2000 SMARTOTDR AND OPTIMETER | 1 | |
| E20PWUS | E20PWUS;ADDITIONAL AC ADAPTER/CHARGER W/ US PLUG FOR TB2000 SMARTOTDR AND OPTIMETER | 1 | |
| E40PWAU | E40PWAU;AC/DC Adapter/Charger Australia | 1 | |
| E40PWE | E40PWE;AC/DC Adapter/Charger Europe | 1 | |
| E40PWIND | E40PWIND;AC/DC Adapter/Charger India D | 1 | |
| E40PWSA | E40PWSA;AC/DC Adapter/Charger South Africa | 1 | |
| E40PWUK | E40PWUK;AC/DC Adapter/Charger UK | 1 | |
| E40PWUS | E40PWUS;AC/DC Adapter/Charger US | 1 | |
| E9ADAPTER19-21 | E9ADAPTER19-21;19/21 INCHES RACK MOUNTING ADAPTER | 1 | |
| E9ADAPTER19-23 | E9ADAPTER19-23;19/23 INCHES RACK MOUNTING ADAPTER | 1 | |
| E9SACCEPT | E9SACCEPT;Service on Site Acceptance Test | 1 | |
| E9SFAT | E9SFAT;Service Factory Acceptance Test | 1 | |
| EAA0260D32A | GOLD SPACER F/ADAPT | 1 | |
| EAK0221J64A | AC ADAPTOR | 2 | |
| EAK0222J83B | KIT-ADAPTER HUB MTG AC400 | 1 | |
| EAK0301B08A | DIAG ADPTR REPLAC KIT1 V-VW-VT | 1 | |
| EAT999600 | Adaptador para vaciado de combustible | 1 | |
| EC135-723 | AIR DATA ACCESSORIES KIT AIRBUS H135 & H145 HELICOPTER | 4 | |
| ECS6016E5P | DUMMY RECEPTACLE | 1 | |
| EECS309B-2A | ADAPTOR AC 4AMP RAPD CHRGR | 1 | |
| EEDM5997 | TACH ADPT CYCLE | 1 | |
| EEHD496090 | AC ADAPTER 5V 2A USB C | 1 | |
| EEHD499093 | MONITOR AC ADAPTR | 1 | |
| EELD500-3 | VACUUM ADAPTER | 1 | |
| EELD600HD-1 | ADAPTORS FOR HD SMOKE MACHINE | 1 | |
| EELDGASCAP | 3 PACK GAS CAP ADAPTORS | 1 | |
| EELDGASCAP1 | GAS CAP ADAPTOR 1 EACH | 1 | |
| EEPV700-ADD | FUEL-VAC-OIL-TRAN-COMP ADAPTOR | 1 | |
| EETM306A08 | COP4 ADPTR ACUR-HNDA-ISUZ | 1 | |
| EOF-OSX144-PACK | EOF-OSX144-PACK;144 ports optical switch with cascaded cable | 1 | |
| EOFS2005L | EOFS2005L;Optical Fiber Cable OFS200 5-Licence Package | 1 | |
| EOPTITRAKPLUS | EOPTITRAKPLUS;OptiTrakPLUS License - Adds OTDR Trace View to OptiTrak | 1 | |
| EOPTITRAKPLUS-UPG | EOPTITRAKPLUS-UPG;OptiTrakPLUS Upgrade License - Adds OTDR Trace View to OptiTrak | 1 | |
| EP326-16S-50 | LIGHT - WORK, 26 WATTS, EXPLOSION PROOF (*SAFETY*) OPERATES ON 120/VAC, 60 HZ, CHORD LENGTH: 50 FEET; OPTIONS AVAILABLE: 220 VAC 50 HZ P/N EP326-25S-50, 220 VAC 60 HZ P/N , EP326-26S-50. | 2 | |
| EP4086-0100 | INTERFACE TEST ADAPTER | 1 | |
| EQ880-7 | EQUIPTO WIRE SPOOL RACK | 1 | |
| ERJ170/190-945 | AIRDATA ACCESSORIES SET (ADAPTER) | 6 | |
| ERJ170/190-946 | TEST ADAPTORS AND HOSES ACCESSORIES KIT | 13 | |
| ESD3290 | OPTICAL TACHOMETER PICK UP | 1 | |
| ESMARTACQ | ESMARTACQ;SMARTACQ OTDR OPTION | 1 | |
| ESMARTACQ-100 | ESMARTACQ-100;SMARTACQ OTDR OPTION FOR SMARTOTDR | 1 | |
| ESMARTACQ-5K | ESMARTACQ-5K;SMARTACQ OTDR OPTION FOR T-BERD/MTS-5800 | 1 | |
| ESMARTACQ-6KV2 | ESMARTACQ-6KV2;SMARTACQ OTDR OPTION FOR T-BERD/MTS-6000AV2 | 1 | |
| ESMARTACQ-UPG | ESMARTACQ-UPG;SMARTACQ OTDR OPTION UPGRADE | 1 | |
| ESMARTACQ100UP | ESMARTACQ100UP;SMARTACQ OTDR UPGRADE OPTION FOR SMARTOTDR | 1 | |
| ESMARTACQ4KUPG | ESMARTACQ4KUPG;SMARTACQ OTDR UPGRADE OPT FOR T-BERD/MTS-4000 | 1 | |
| ESMARTACQ5KUPG | ESMARTACQ5KUPG;SMARTACQ OTDR UPGRADE OPT FOR T-BERD/MTS-5800 | 1 | |
| ESMARTACQ8KUPG | ESMARTACQ8KUPG;SMARTACQ OTDR UPGRADE OPT FOR T-BERD/MTS-8000 | 1 | |
| ETB4000HPT-ACE | ETB4000HPT-ACE;ETB4000HPT-ACE | 1 | |
| ETB6000AT-ACE-NA | ETB6000AT-ACE-NA;ETB6000AT-ACE-NA Transport and Optical Platform | 1 | |
| EUPP125PM-10 | EUPP125PM-10;Pack of 10 1.25 mm UPP adapter for PM mainframe option | 1 | |
| F 7033-24 | JACK AND ADAPTER ASSY (GENERATOR AND CSD) (TEKLE PARA SUBIR Y BAJAR UNIDADES | 1 | |
| F 80060-6 | ADAPTER WING JACK PAD | 25 | |
| F07001-11 | JACK ADAPTER FWD BODY B767 | 1 | |
| F20284-1 | Wear Gage Set-GrdPwr Plug & Receptacle | 1 | |
| F2101643-00 | OPTIC MACHINED | 1 | |
| F28313000 | ADAPTER, AIRCRAFT JACKING POINT | 1 | |
| F28325000 | TORQUE ADAPTOR - MLG RETRACT ACTR A320NEO | 1 | |
| F38-001 | RACOR ADAPTADOR DE LIMPIEZA DEPÓSITOS | 1 | |
| F46176 | ADAPTER FOR RETAINER NUT OF RETRACTION STRUT (MLG) | 1 | |
| F46253-1000 | ADAPTER FOR SHOCK ABSORBER ATTACHING NUT ON BARREL (MLG) | 1 | |
| F65-0-4789 | ACTUATOR LEAKAGE TEST ADAPTER | 1 | |
| F65-0-4793 | ACTUATOR PRESSURE TEST ADAPTER | 1 | |
| F67B | RACHET ADAPTOR 3/8" | 1 | |
| F7/252 JACKSCREW | JACKSCREW ADAPTER 727 | 1 | |
| F70009 | ADAPTER ASSY -0 AIRCRAFT JACKING USED TO ADAPT | 1 | |
| F70009 - 1 | ADAPTER ASSY AIRCRAFT JACKING | 1 | |
| F70009-1 | ADAPTER, AIRCRAFT JACKING | 1 | |
| F70175-1 | Wrench adapter-face spanner，LUG | 1 | |
| F70206-1 | Adapter Assembly - Hollow Bolt, Fuel Leak Tracing | 12 | |
| F70248-1 | WEAR GAGE SET - GROUND POWER PLUG AND RECEPTACLE | 1 | |
| F70255 | WRENCH ADAPTER -0 HOUSING NUT, ACTUATOR THIS | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70282-1 | RECEPTACLE | 1 | |
| F70284 | WEAR GAGE SET - GRND PWR PLUG & RECEPTACLE | 1 | |
| F70284 REV NC | WEAR GAGE SET - GRND PWR PLUG & RECEPTACLE | 1 | |
| F70284-1 | Wear Gauge Set - Plug and Receptacle, Ground Power | 28 | |
| F70284-2 | EXTERNAL POWER RECEPTACLE .433"/.437" NO-GO | 6 | |
| F70284-3 | EXTERNAL POWER RECEPTACLE .308"/.310" NO-GO | 5 | |
| F70312-16 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 4 | |
| F70312-20 | ADAPTER - TORQUE, RETRACT ACTUATOR NOSE LANDING GEAR | 2 | |
| F70312-3 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATO | 10 | |
| F7033-1 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F7033-21 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F7033-24 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F7033-25 | Adapter - Constant Speed Drive and AC Generator | 1 | |
| F70330-104 | Static Balance Eqpt - Control Surfaces 737 B Kit | 5 | |
| F70330-126 | STATIC BALANCE EQPT - CONTROL SURFACES | 8 | |
| F70330-126 | STATIC BALANCE EQPT – CONTROL SURFACE | 8 | |
| F70330-162 | STATIC BALANCE EQPT - CONTROL SURFACES | 5 | |
| F70330-162 | STATIC BALANCE EQPT – CONTROL SURFACE | 5 | |
| F70330-87 | Static Balance Eqpt - Control Surfaces | 3 | |
| F70330-99 | STATIC BALANCE EQPT - CONTROL SURFACES | 2 | |
| F70333-24 | ADAPTER - & JACK | 12 | |
| F70333-25 | Adapter -Constant Speed Drive And Ac Generator | 8 | |
| F70333-FLS | CSD ADAPTOR WITH JACK | 1 | |
| F71138 | ADAPTER ASSY -0 AIRCRAFT JACKING TO PROVIDE A | 1 | |
| F71138-501 | Jack Adapter | 1 | |
| F71139 | ADAPTER -0 AIRCRAFT JACKING | 9 | |
| F71140 | ADAPTER JACK FUSELAG | 1 | |
| F71156 | ADAPTER JACK WING | 1 | |
| F71156-500 | ADAPTER JACK | 1 | |
| F71206 | ADAPTER ASSY -0 AC GENERATOR/DRIVE MOUNT. USED | 1 | |
| F71252 | ADAPTADOR ESTRIADO MACHO HEXAGONAL DE 3/4" | 12 | |
| F71273 | Jackadptr | 1 | |
| F71292-8 | ADAPTER ASSAMBLY AIRCRAFT JACKING | 1 | |
| F72711 | ADAPTER JACK FUSELAG | 1 | |
| F72711-10 | ADAPTER JACK FUSELAG | 1 | |
| F72711-9 | JACK ADAPTOR | 6 | |
| F72713 | ADAPTER JACK FUSELAG | 1 | |
| F72714 | ATTACH BEAMS ENGINE HANDLING EQPT | 1 | |
| F72731-130 | CONNECT. SYS. TESTER TO FUEL TANK SPAR BULKHEAD RECEPTACLE | 8 | |
| F72786-181 | CALIBRATION EQPT - ANGLE OF ATTACK SENSOR | 11 | |
| F72790 | CONTROL WHEEL PROTRACTOR MOUNT ADAPTER | 25 | |
| F72823-40 | ADAPTOR TEST, PITOT STATIC PROBE, REPLAC | 18 | |
| F72883-10 | ADAPTER ASS'Y SET-LUBRFITTRACKROLLE | 3 | |
| F72925-15 | ADAPTER SET - PROTACTOR, FWD THRUST LEVER | 1 | |
| F72935 | ADAPTER -0 ENG FUEL FEED LINE EVACUATION | 1 | |
| F72952-1 | ADAPTER SET - PROTRACTOR, FORWARD THRUST LEVER | 2 | |
| F72952-14 | Adapter Set - Protractor, FWD Thrust Lever | 9 | |
| F72952-14 -15 | Adapter Set -Protractor. Forward Thrust Lever | 1 | |
| F72952-15 | ADAPTER - PROTRACTOR | 23 | |
| F72952-15 | PROTRACTOR ADAPTER (THRUST LEVER) | 23 | |
| F72952-16 | THRUST LEVER PROTRACTOR ADAPTOR | 6 | |
| F72952-17 | THRUST LEVER PROTRACTOR ADAPTOR | 5 | |
| F72952-2 | PROTRACTOR ADAPTOR, THRUST REVERS | 6 | |
| F72952-20 | ADAPTER PROTRACTOR FWD THRUST LEVER | 1 | |
| F72952-21 | ADAPTER PROTRACTOR FWD THRUST LEVER | 1 | |
| F72952-3 | ADAPTER SET -0 PROTRACTOR, FWD THRUST LEVER USED | 1 | |
| F72962-15 | ADAPTOR SET -PROTACTOR FWD THRUST LEVER | 1 | |
| F72988-2 | Attach beams engine handling eqpt | 6 | |
| F72988-3 | Attach beams engine handling eqpt | 4 | |
| F72988-4 | Attach beams engine handling eqpt | 1 | |
| F72988-71 | Attach beams engine handling eqpt | 4 | |
| F73012-1 | Swaging eqpt-roller，lock actuator barrel，main landing gear | 1 | |
| F780000-7 | NOSE JACKING ADAPTORS | 1 | |
| F780735GA6FP110 | ALIGNMENT GUIDE (FOR Q-MTITAN RECEPTACLE) | 1 | |
| F8000-1 | JACK ADAPTOR | 1 | |
| F8000-7 | FWD.BODY JACK ADAPT. | 1 | |
| F80000 | JACKPAD ADAPTER | 1 | |
| F80000-1 | JACKING NOSE ADAPTER | 7 | |
| F80000-6 | ADAPTER ASSEMBLY AIRCRAFT JACKING | 1 | |
| F80000-7 | JACK ADAPTER | 24 | |
| F80000-7HMT | JACKING FWD BODY ADAPTER | 1 | |
| F80001-1 | AFT JACK PAD ADAPTOR | 22 | |
| F80001-1HMT | JACKING AFT BODY ADAPTER | 1 | |
| F80006-1 | TAIL JACK ADAPTER 73 | 2 | |
| F80009-1 | ADAPTER JACK PAD | 1 | |
| F8001-1 | AFT BODY JACK ADAPT. | 1 | |
| F80011-1 | CRADLE ADAPTER - AC GENERATOR AND CSD | 4 | |
| F80011-16 | CRADLE ADAPTOR A / C GENERATOR & CSD ( WITH JACK ) | 3 | |
| F80014-1 | ADAPTOR HANDLING EQUIP,JACKSCREW, STABIL | 1 | |
| F80014-16 | HOIST ADAPTER-STAB JACKSCREW | 14 | |
| F80014-2 | STAB JACKSCREW HOIST ADAPTOR | 13 | |
| F80032-1 | Wrench Adapter - Face Spanner Lug, MLG | 7 | |
| F80051-1 | Wrench Adapter -Face Spanner Lug | 1 | |
| F80060 | ADAPTER AIRCRAFT JACKING | 1 | |
| F80060-1 | ADAPTER AIRCRAFT JACKING | 3 | |
| F80060-2 | JACK ADAPTER | 4 | |
| F80060-2-M | JACKING ADAPTER | 1 | |
| F80060-4 | ADAPTER AIRCRAFT JACKING | 1 | |
| F80060-6 | ADAPTER - AIRPLANE JACKING | 25 | |
| F80060-6HMT | JACKING WING ADAPTER | 1 | |
| F80060-8 | JACK ADAPTERS | 1 | |
| F80060FAS | Aircraft Jacking Adapter | 1 | |
| F80068-1 | Support Assy Aft Fusalage Jacking Adapt | 5 | |
| F80176-8 | WRENCH ADAPTOR - TORQUEREPLACES F80176-1 | 17 | |
| F80186-3 | WHEEL ADAPTER MAIN- WHEEL REPLACEMENT | 1 | |
| F80201-1 | RECEPTACLE ASSY - FUEL SAMPLING | 30 | |
| F80229-101 | RECEPTACLE PROTECTIVE CAP | 1 | |
| F80229-96 | RECEPTACLE CONNECTOR | 1 | |
| F80245-1 | Restraint eqpt-outbd T.E flap tracks, wbl 254 & 355 | 1 | |
| F80259 | L/E SLAT ACT ADAPT | 1 | |
| F80262-1 | VISE JAW EQPT - L.E. ACTUATOR, ASSEMBLY / DISASSEMBLY F80262-1 | 1 | |
| F80266-40 | Test eqpt-le flap actuator | 1 | |
| F830 | RACHET, 3/8, ROUND HEAD, 5/8 (Head Depth) X 1 5/32 | 1 | |
| F9259001301000 | JACKING ADAPTER | 1 | |
| FAL5P592N | ADAPTER, AIRCRAFT JACKING POINT | 1 | |
| FAT505 | AILERON ACTUATOR TORQUE ADAPTER | 1 | |
| FB70062-1 | IDG ADAPTOR JACK | 2 | |
| FB70077-1-108 | INTERFACE ADAPTOR/LIFTING | 1 | |
| FB70077-1-108REV.A | INTERFACE ADAPTOR/LIFTING BRACKET SET (1 LH AND 1 RH) | 2 | |
| FB98D0001 | JACK ADAPTOR NOSE | 1 | |
| FBP-787-1 | KIT, CCR FIBER OPTIC, LONG REACH - BOEING 787 | 4 | |
| FBP-787-CCR | 787 LONG REACH FIB/OPT PROBE TOOL | 1 | |
| FBP3-C130 | INTERFACE TIP - FIBER OPTIC, INSPECTION PROBE | 1 | |
| FBPP-DPAC8 | FBPP-DPAC8;USB OTG Adapter Cable USB Type A Female to Micro USB Male 15cm | 1 | |
| FBPP-TACS1 | FBPP-TACS1;CASE PLASTIC WITH DIVIDERS FOR TIPS AND ADAPTERS | 1 | |
| FBPT-38999-11-02-RS-1 | FBPT-38999-11-02-RS-1;Guide 38999 Type III 11-02 Receptacle-Sockets 29504/5 BAP1-G | 1 | |
| FBPT-38999-13-04-RP-1 | FBPT-38999-13-04-RP-1;Guide 38999 Type III 13-04 Receptacle-Pins 29504/4 BAP1-G | 1 | |
| FBPT-38999-17-08-PP | FBPT-38999-17-08-PP;Guide 38999 Type III 17-08 Plug-Pins Sz 16 Contacts BAP3 | 1 | |
| FBPT-38999-17-08-RS | FBPT-38999-17-08-RS;Guide 38999 Type III 17-08 Receptacle-Sockets Sz 16 Contacts BAP3 | 1 | |
| FBPT-38999-19-11-PS | FBPT-38999-19-11-PS;Guide 38999 Type III 19-11 Plug-Socket Sz 16 Contacts BAP3 | 1 | |
| FBPT-38999-19-11-RP | FBPT-38999-19-11-RP;Guide 38999 Type III 19-11 Receptacle-Pin Sz 16 Contacts BAP3 | 1 | |
| FBPT-38999-19-11-RS-1 | FBPT-38999-19-11-RS-1;Guide 38999 Type III 19-11 Receptacle-Sockets 29504/5 BAP1-G | 1 | |
| FBPT-38999-G006 | FBPT-38999-G006;Guide 38999 Plug Size 13 Sockets with Size 16 Contacts1--Rev01 | 1 | |
| FBPT-38999-G007 | FBPT-38999-G007;Guide 38999 Receptacle Size 13 Pins with Size 16 ContacTS--Rev0 | 1 | |
| FBPT-65CM-P | FBPT-65CM-P;GUIDE BACC65CM PIN | 1 | |
| FBPT-65CM-S | FBPT-65CM-S;GUIDE BACC65CM SOCKET | 1 | |
| FBPT-65CN-P | FBPT-65CN-P;GUIDE BACC65CN PIN | 1 | |
| FBPT-65CN-S | FBPT-65CN-S;GUIDE BACC65CN SOCKET | 1 | |
| FBPT-A801-1-15-R | FBPT-A801-1-15-R;GUIDE ARINC TYPE 1 SIZE 15/06 RECEPTACLE W/PINS | 1 | |
| FBPT-A801-1-17-R | FBPT-A801-1-17-R;GUIDE ARINC TYPE 1 SIZE 17/08 SHELL RECEPTACLE W/PINS | 1 | |
| FBPT-A801-1-19-R | FBPT-A801-1-19-R;GUIDE ARINC TYPE 1 SIZE 19/12 SHELL RECEPTACLE W/PINS | 1 | |
| FBPT-A801-1-21-R | FBPT-A801-1-21-R;GUIDE ARINC TYPE 1 SIZE 21/16 SHELL RECEPTACLE W/PINS | 1 | |
| FBPT-A801-1-23-R | FBPT-A801-1-23-R;GUIDE ARINC TYPE 1 SIZE 23/24 SHELL RECEPTACLE W/PINS | 1 | |
| FBPT-A801-1-25-R | FBPT-A801-1-25-R;GUIDE ARINC TYPE 1 SIZE 25/32 SHELL RECEPTACLE W/PINS | 1 | |
| FBPT-A801-1000R | FBPT-A801-1000R;T-GUIDE - ARINC - TYPE 1 - SIZE 11-02 SHELL - RECEPTACLE WITH PINS | 1 | |
| FBPT-A801-1001R | FBPT-A801-1001R;Receptacle ARINC Type 1 Size 13-04 Shell Pins | 1 | |
| FBPT-A801-1002R | FBPT-A801-1002R;RECEPTACLE ARINC TYPE 1 SIZE 15-06 SHELL PINS | 3 | |
| FBPT-A801-1003-RP-1 | FBPT-A801-1003-RP-1;Guide ARINC 801 Type 1 Size 21-16 Receptacle-Pins 1.25mm termini BAP1-G | 1 | |
| FBPT-A801-1003R | FBPT-A801-1003R;RECEPTACLE - ARINC TYPE 1 - SIZE 21-16 SHELL | 1 | |
| FBPT-A801-1005R | FBPT-A801-1005R;Receptacle ARINC Type 1 Size 13-04 Shell Pins Wide | 1 | |
| FBPT-A801-2001-RS-1 | FBPT-A801-2001-RS-1;Guide ARINC 801 Type 2 F12 Receptacle-Sockets 1.25mm termini BAP1-G | 1 | |
| FBPT-A801-2001P | RECEPTACLE ARINC TYPE 2 F12 SOCKETS | 2 | |
| FBPT-A801-2001R | FBPT-A801-2001R;RECEPTACLE ARINC TYPE 2 F12 SOCKETS | 3 | |
| FBPT-A801-2002R | FBPT-A801-2002R;RECEPTACLE ARINC TYPE 2 F12 PINS | 1 | |
| FBPT-A801-25-32-RP-1 | FBPT-A801-25-32-RP-1;Guide ARINC 801 Type 1 Size 25-32 Receptacle-Pins 1.25mm termini BAP1-G | 1 | |
| FBPT-A801-4001P | FBPT-A801-4001P;PLUG ARINC TYPE 4 12 CONTACT PINS | 4 | |
| FBPT-A801-4001R | FBPT-A801-4001R;RECEPTACLE ARINC TYPE 4 12 CONTACT SOCKETS | 1 | |
| FBPT-A801-4002P | FBPT-A801-4002P;Plug ARINC Type 4 36 Contact | 3 | |
| FBPT-A801-4002R | Type 4/36 Contact Receptacle with Sockets | 4 | |
| FBPT-C130 | FBPT-C130;INTERFACE RUGGED FOR FBP GUIDES--REV0 | 2 | |
| FBPT-COD-MT | FBPT-COD-MT;Tip OptiTip MM and HMFOC MM Includes Plug and Receptacle Guides | 1 | |
| FBPT-COD-MTA | FBPT-COD-MTA;TIP OPTITIP SM AND HMFOC SM INCLUDES PLUG AND RECEPTACLE GUIDES | 1 | |
| FBPT-COD-MTARG | FBPT-COD-MTARG;Guide OptiTip and HMFOC SM Receptacle | 1 | |
| FBPT-COD-MTRG | FBPT-COD-MTRG;Guide OptiTip and HMFOC MM Receptacle | 1 | |
| FBPT-FCAPC-L | FBPT-FCAPC-L;Tip FC-APC Bulkhead Long Reach for FBP | 1 | |
| FBPT-FEBS10-R | FBPT-FEBS10-R;Tip for ZTE FebS-10 Distribution Box Receptacle | 1 | |
| FBPT-FITDP-R | FBPT-FITDP-R;Tip for FiberHome FitDP Distribution Box Receptacle | 1 | |
| FBPT-HDV66.4-DC-L | FBPT-HDV66.4-DC-L;Tip VITA 66.4 Daughtercard Long Reach for FBP | 1 | |
| FBPT-LC-L | FBPT-LC-L;Tip LC Buklhead Long Reach for FBP | 1 | |
| FBPT-LC-XL | FBPT-LC-XL;Tip LC Bulkhead for FBP Extra Long Reach-rev001 | 1 | |
| FBPT-LC-XXL | FBPT-LC-XXL;LC Extra Extended Long Reach Bulkhead Tip | 1 | |
| FBPT-LDV66.4-DC-L | FBPT-LDV66.4-DC-L;Tip VITA 66.4 Low Density Daughtercard Long Reach for FBP | 1 | |
| FBPT-LUX24-G001 | FBPT-LUX24-G001;GUIDE LUXCIS PLUG TYCO 24 CONTACT 1.25MM SOCKETS--REV0 | 1 | |
| FBPT-LUX24-G002 | FBPT-LUX24-G002;GUIDE LUXCIS RECEPTACLE-TYCO 24 CONTACT 1.25MM PINS | 1 | |
| FBPT-MIL1-G001 | FBPT-MIL1-G001;Guide 28876 4 Contacts Plug Size 13 with Pins--Rev0 | 1 | |
| FBPT-MIL1-G001-1 | FBPT-MIL1-G001-1;Guide 28876 Size 13 Plug-Pins 4 Contacts BAP1-G | 1 | |
| FBPT-MIL1-G002 | FBPT-MIL1-G002;Guide 28876 4 Contacts Plug Size 13 With Sockets | 1 | |
| FBPT-MIL1-G002-1 | FBPT-MIL1-G002-1;Guide 28876 Size 13 Plug-Sockets 4 Contacts BAP1-G | 1 | |
| FBPT-MIL1-G003 | FBPT-MIL1-G003;Guide 28876 4 Contacts Receptacle Size 13 With Pins | 1 | |
| FBPT-MIL1-G003-1 | FBPT-MIL1-G003-1;Guide 28876 Size 13 Receptacle-Pins 4 Contacts BAP1-G | 1 | |
| FBPT-MIL1-G004 | FBPT-MIL1-G004;Guide 28876 4 Contacts Receptacle Size 13 with SockeTS--Rev0 | 1 | |
| FBPT-MIL1-G004-1 | FBPT-MIL1-G004-1;Guide 28876 Size 13 Receptacle-Sockets 4 Contacts BAP1-G | 1 | |
| FBPT-MIL1-G005 | FBPT-MIL1-G005;Guide - 28876 - 8 Contacts - Plug - Size 15 with Pins--Rev0 | 1 | |
| FBPT-MIL1-G005-1 | FBPT-MIL1-G005-1;Guide 28876 Size 15 Plug-Pins 8 Contacts BAP1-G | 1 | |
| FBPT-MIL1-G008 | FBPT-MIL1-G008;Guide - 28876 - 8 Contacts - Receptacle - Size 15 with SockeTS--Rev0 | 1 | |
| FBPT-MIL1-G008-1 | FBPT-MIL1-G008-1;Guide 28876 Size 15 Receptacle-Sockets 8 Contacts BAP1-G | 1 | |
| FBPT-MT999-G001 | FBPT-MT999-G001;Guide - 38999 Pins - Size 11 Plug - 1 Contact | 1 | |
| FBPT-MT999-G003 | FBPT-MT999-G003;Guide - 38999 Pins - Size 11 Receptacle - 1 Contact | 1 | |
| FBPT-MT999-G005 | FBPT-MT999-G005;Guide - 38999 Pins - Size 21 Plug - 4 ContacTS | 1 | |
| FBPT-MT999-G007 | FBPT-MT999-G007;Guide - 38999 Pins - Size 21 Receptacle - 4 Contacts | 1 | |
| FBPT-MT999-G011 | FBPT-MT999-G011;Guide 38999 MT Size 11 Contact 1 Socket-Plug | 1 | |
| FBPT-MT999-G013 | FBPT-MT999-G013;Guide 38999 MT Size 11 Contact 1 Socket-Receptacle | 1 | |
| FBPT-MT999-G015 | FBPT-MT999-G015;Guide 38999 MT Size 21 Contacts 4 Socket-Plug | 1 | |
| FBPT-MT999-G017 | FBPT-MT999-G017;Guide 38999 MT Size 21 Contacts 4 Socket-Receptacle | 1 | |
| FBPT-MTC-G002 | FBPT-MTC-G002;Guide MTC Receptacle with SCkt--Rev01 | 1 | |
| FBPT-MTP-L | FBPT-MTP-L;Tip MTP Bulkhead Long Reach for FBP | 1 | |
| FBPT-MTPA-L | FBPT-MTPA-L;Tip MTP-APC Bulkhead Long Reach for FBP | 1 | |
| FBPT-MTPA-L-1 | FBPT-MTPA-L-1;Tip MTP-APC Bulkhead Long Reach for FBP NO KEY | 1 | |
| FBPT-MU-APC | FBPT-MU-APC;Tip MU-APC Bulkhead Long Reach | 1 | |
| FBPT-MU-L | FBPT-MU-L;Tip MU Bulkhead Long Reach for FBP | 1 | |
| FBPT-MU-XL | FBPT-MU-XL;TIP MU Bulkhead Extended Reach for FBP--Rev0 | 1 | |
| FBPT-ODC-G001 | FBPT-ODC-G001;Guide ODC Plug Sockets W/ 2 Contacts 1.25mm | 1 | |
| FBPT-ODC-G002 | FBPT-ODC-G002;Guide ODC Receptacle Pins W/ 2 Contacts 1.25mm | 1 | |
| FBPT-ODC-G003 | FBPT-ODC-G003;Guide ODC Plug Sockets W/ 4 Contacts (1.25mm) | 1 | |
| FBPT-ODC-G004 | FBPT-ODC-G004;Guide ODC Receptacle Pins W/ 4 Contacts (1.25mm) | 1 | |
| FBPT-OPD-32-3-RP | FBPT-OPD-32-3-RP;Guide OPD Size 32 28F Rectangular Receptacle-Pins | 1 | |
| FBPT-PHD-G019 | FBPT-PHD-G019;GUIDE 38999-PHD 20 FIBER SIZE 17 RECEPTACLE PINS--REV01 | 1 | |
| FBPT-PHD-G020 | FBPT-PHD-G020;GUIDE 38999-PHD 20 FIBER SIZE 17 RECEPTACLE | 1 | |
| FBPT-PSHLK-MTA-R | FBPT-PSHLK-MTA-R;TIP PUSHLOK MT SM/APC RECEPTACLE | 1 | |
| FBPT-SABR-G001 | FBPT-SABR-G001;GUIDE SABRITECH PART NUMBER 1643202019 RECEPTACLE WITH PINS | 1 | |
| FBPT-SC-L | FBPT-SC-L;Tip SC Bulkhead Long Reach for FBP | 1 | |
| FBPT-SC2-L | FBPT-SC2-L;Tip SC2 Bulkhead Long Reach for FBP--Rev0 | 1 | |
| FBPT-SC2-XL | FBPT-SC2-XL;Tip SC2 Bulkhead - Extra Long Reach for FBP | 1 | |
| FBPT-ST-L | FBPT-ST-L;Tip ST Bulkhead Long Reach for FBP--Revp0 | 1 | |
| FCC04-35-40000 | JACK ADAPTOR MLG, NLG | 1 | |
| FCLT-HMFOC-R | FCLT-HMFOC-R;HMFOC Receptacle CleanBlast Tip | 1 | |
| FCLT-HMFOC-R-CF12 | FCLT-HMFOC-R-CF12;HMFOC Receptacle CleanBlast Tip 12-24F | 1 | |
| FCPP-PS1 | FCPP-PS1;Single USB Output AC Input Charger With US EU UK AU Adapters | 1 | |
| FCPT-COD-MT-R | FCPT-COD-MT-R;Tip OptiTip and HMFOC MM Receptacle for Sidewinder | 1 | |
| FCPT-COD-MTA-R | FCPT-COD-MTA-R;Tip OptiTip and HMFOC SM Receptacle for Sidewinder | 1 | |
| FCPT-IP9A-R | FCPT-IP9A-R;IP9 SM Receptacle Tip for Sidewinder | 1 | |
| FCPT-MT38999-11-01-RS | FCPT-MT38999-11-01-RS;Guide MT38999 Size 11 1 MT Cavity Receptacle-Sockets for Sidewinder | 1 | |
| FCPT-MT38999-21-04-RS | FCPT-MT38999-21-04-RS;Guide MT38999 Size 21 4 MT Cavity Receptacle-Sockets for Sidewinder | 1 | |
| FCPT-MTP-L | FCPT-MTP-L;Tip MPO MM Bulkhead for Sidewinder Long Reach - Requires FCPP-OLA-2 | 1 | |
| FCPT-MTPA-L | FCPT-MTPA-L;Tip MPO SM Bulkhead for Sidewinder Long Reach - Requires FCPP-OLA-2 | 1 | |
| FCPT-THDM-G020 | FCPT-THDM-G020;Guide THDMC 28876 Size 13 2 MT Blades Receptacle for Sidewinder | 1 | |
| FCPT-THDM-G040 | FCPT-THDM-G040;Guide THDMC 28876 Size 15 4 MT Blades Receptacle for Sidewinder | 1 | |
| FCPT-UFBPT | FCPT-UFBPT;Adapter Sidewinder to FBP Probe Interface | 1 | |
| FD0001D23654000 | ADAPTER, JACKING N.L.G. | 1 | |
| FD0001D236540000 | ADAPTER, JACKING NLG | 1 | |
| FD0001D23664000 | ADAPTER, JACKING M.L.G. | 1 | |
| FD0001D236640000 | ADAPTER, JACKING MLG | 1 | |
| FDOO01D2364000 | ADAPTER JACKING NLG | 1 | |
| FDOO01D23654000 | Adapter, Jacking N.L.G. | 1 | |
| FDOO01D23664000 | Adapter, Jacking M.L.G. | 1 | |
| FDOO031D23664000 | ADAPTER JACKLING MLG | 1 | |
| FDS-400-301 | ADAPTOR RACK CVR | 14 | |
| FDS40-0215 | Honeywell CVR to Rack Adaptor Cable - Note: CVR Download on aircraft | 4 | |
| FDS40-0215?? | HONEYWELL CVR TO RACK ADAPTOR CABLE?? | 4 | |
| FDS40-0247 | ARINC-757 CVR Rack Adaptor - Note: CVR Download on aircraft | 4 | |
| FDS40-0247 | HNY CVR RACK ADAPTOR | 4 | |
| FDS40-0251 | RACK ADAPTER | 1 | |
| FDS40-0270 | FLIGHT RECORDER PN: PENNY & GILES 91005 (B&D/SPIRENT) D51615 CABLE PN: FDS40-0270 DESCRIPTION: B&D (SPIRENT) INTERFACE CABLE | 1 | |
| FDS40-0274 | INETFACE ADAPTER CABLE | 3 | |
| FDS40-247 | ARINC-757 CVR RACK ADAPTOR - NOTE: CVR DOWNLOAD ON AIRCRAFT | 1 | |
| FDS40-5031 | CVR Rack Adaptor (On Aircraft) | 3 | |
| FDS400-215 | ADAPTOR RACK CVR | 4 | |
| FDS400-247 | CVR RACK ADAPTOR | 4 | |
| FDS400215 | ADAPTOR RACK CVR | 4 | |
| FDS400247 | CVR RACK ADAPTOR | 4 | |
| FI-60 | FI-60;Live Fiber Identifier VP-60 OPM w/LFI Attachment 2.5mm and 1.25mm Adapters | 1 | |
| FIL5510 | A380 jack pad installation adapter | 1 | |
| FJC01-35-24000 | ADAPTER JACK SUPPORT, CENTER WING | 1 | |
| FJC01-35-42000 | ADAPTER JACK BALLE -NLG | 1 | |
| FJC02-35-20000 | TRIPED JACK-ADAPTER REARFUSLAGE | 1 | |
| FJC02-35-41000 | ADAPTER JACK BALLE -MLG | 1 | |
| FJC02-35-42001 | ADAPTER JACK BALL (MLG) | 1 | |
| FJC04-35-40000 | JACK ADAPTER ROLING TYPE | 1 | |
| FMAG-AC951 | FMAG-AC951;Magnetic Adapter for AC951 Universal Clamshell | 1 | |
| FMAX-AC951 | FMAX-AC951;AC951 Universal Clamshell Microscope Adapter Female Threaded | 1 | |
| FMAX-AC951A | FMAX-AC951A;AC951 Universal Clamshell APC Microscope Adapter Female Threaded | 1 | |
| FMGJA | Falcon Stainless Main Gear Jack Adapter | 1 | |
| FMGJA-100 | Main Gear Axle Jack Adapter | 1 | |
| FNGJA | Nose Gear Axle Jack Adapter | 1 | |
| FP3-10 | ADAPTER CABLE 10-PIN ACTEL FP3-10 PIN ADAPTER-KIT | 1 | |
| FPT-LC-A-L | FPT-LC-A-L;Tip LC APC Bulkhead Long Reach for INX | 1 | |
| FPT-LC-D-L | FPT-LC-D-L;Tip LC PC Bulkhead Duplex Long Reach for INX-7 | 1 | |
| FPT-LC-L | FPT-LC-L;Tip LC PC Bulkhead Long Reach for INX | 1 | |
| FPT-MU-L | FPT-MU-L;Tip MU PC Bulkhead Long Reach for INX | 1 | |
| FPT-OTAP-A-A6-R | FPT-OTAP-A-A6-R;Tip OptiTap APC Receptacle Angled for INX | 1 | |
| FPT-PSHLK-A-A6-R | FPT-PSHLK-A-A6-R;Tip Pushlok APC Receptacle Angled for INX | 1 | |
| FPT-PSHLK-MT-A-A6-R | FPT-PSHLK-MT-A-A6-R;Tip Pushlok MT APC Receptacle for INX-7 | 1 | |
| FPT-QODC12-MT-A-R | FPT-QODC12-MT-A-R;Tip Q-ODC-12 MT APC Receptacle for INX-7 | 1 | |
| FPT-SC-A-L | FPT-SC-A-L;Tip SC APC Bulkhead Long Reach for INX | 1 | |
| FRS639842 | ADAPTER TORQUE REACTION 3 INCHES COUPLING SPANNER | 1 | |
| FTA35 | 3/8” DRIVE FEMALE/MALE TORQUE ADAPTOR MANUFACTURER: SNAP-ON | 1 | |
| FTI-MB/LB-A1 | Puller Unit: MB-XX Mandrel Adapter - Allows LB Mandrel and Nosecap to attach to MB Puller Unit | 1 | |
| FWA727TT2 | JACK PAD ADAPTER | 1 | |
| FX10151405 | RECEPTACLE | 1 | |
| FXT-13305 | INTERFACE TEST ADAPTER (ITA) (FXT-13305) | 1 | |
| G0000010003 | JACK ADAPTER, AIRCRAFT LIFTING (FR. 29) | 1 | |
| G0433240002 | ADAPTER ASSY MLG JACK | 1 | |
| G07002 | JACKING BAR EQPT -0 MLG AXLE | 1 | |
| G07002-1 | JACKING BAR EQPT-MLG AXLE | 3 | |
| G07004-1 | Jacking Bar Eqpt-MLG Axle | 5 | |
| G07005-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS IV AND V | 5 | |
| G07006-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS VII AND VIII | 2 | |
| G07009-1 | JACKING ADAPTER RECOVERY EQUIPMENT - AFT INBOARD AND OUTBOARD DIAGONAL BRACE | 1 | |
| G07015-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 583 | 1 | |
| G1002440015-001 | EXTERNAL POWER RECEPTACLE | 1 | |
| G1019-SA11 | ADAPTER, JACKING ASSY | 1 | |
| G20003 | STAKING EQPT -0 MLG, ACTUATOR | 1 | |
| G20004 | STAKING EQPT -0 BLG AND WLG RETRACT ACTUATOR, | 1 | |
| G20004-15 | Staking eqpt-BLG and WLG retract actuator，rod end and head end | 3 | |
| G20015-1 | WRENCH - SPANNER, SAFETY LANYARD TIEDOWN RECEPTACLE | 6 | |
| G21008-1 | ADAPTER EQUIPMENT - AIR CYCLE MACHINE (CE) | 2 | |
| G21009-1 | Adapter Equipment -Heat Exchanger/Plenum Removal/ Installation. Ac Pack | 1 | |
| G21009-40 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK 747-8F | 2 | |
| G21009-57 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 1 | |
| G21009-64 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 2 | |
| G21009-65 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 3 | |
| G21010-1 | ADAPTER - CONDENSER, COMPACT MIXER, WATER EXTRACTOR, REMOVAL/INSTALLATION, AIR CONDITIONING PACK (CE) | 1 | |
| G21012-1 | ADAPTER - REHEATER REMOVAL AND INSTALLATION, AIR CONDITIONING PACK (CE) | 2 | |
| G215-070019-1 | JACK ADAPTER KIT | 1 | |
| G215-070019-11 | JACK ADAPTERS LANDING GEAR | 1 | |
| G215T280009-39 | KIT - REDUCER ADAPTOR, VACUUM GAUGE, AND REGULATOR | 1 | |
| G24012-1 | SPACER ASSEMBLY - HOIST ADAPTER INTEGRATED DRIVE GENERATOR | 11 | |
| G24013-1 | ACCESSORY ADAPTER - HOIST SYSTEM RB211 AND CF6-50 ENGINES | 1 | |
| G26012-62 | STRONGBACK EQPT | 1 | |
| G27001 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 5 & | 1 | |
| G27001-1 | Lock Open Eqpt - Inbd Spoiler Actr | 11 | |
| G27002 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 6 & | 1 | |
| G27002-1 | Lock Open Eqpt - Inboard Spoiler Actuator #6 & #7 | 10 | |
| G27007-1 | LOCK OPEN EQUPT. - INBD SPOILER ACT 5 & 8 | 1 | |
| G27008 | LOCK EQPT -0 RUDDER ACTUATOR | 1 | |
| G27008-19 | Lock Eqpt - Rudder Actuator | 9 | |
| G27008-41 | Lock Eqpt-Rudder Actuator | 3 | |
| G27012-62 | STRONGBACK EQPT | 1 | |
| G27022-14 | TEST EQPT-ACTUATOR BACKLASH | 1 | |
| G27027 | CONTROL BOX EQPT -0 POWER PACK,T.E. FLAP DRIVE | 1 | |
| G27030 | TORQUE ADAPTER -0 HORIZONTAL STABILIZER ACTUATOR | 1 | |
| G27030-1 | TORQUE ADAPTER - HORIZONTAL STABILIZER ACTUATOR | 9 | |
| G27032-8 | ACTUATOR LOCK EQPT | 10 | |
| G27035-29 | G27035-29 C SLING EQPT-INBD/OUTBD ELEVATOR NOTES: G27035-1 IS REPLACED BY G27035-29 | 3 | |
| G27042 | SLING EQPT-FLAP TRACK | 1 | |
| G27042-103 | Sling eqpt-flap track | 2 | |
| G27042-108 | SLING EQPT. - FLAP TRACK | 3 | |
| G27042-109 | SLING EQPT. - FLAP TRACK | 3 | |
| G27042-39 | Sling Eqpt - Flat Track | 1 | |
| G27042-92 | Sling eqpt-flap track | 1 | |
| G27042-93 | Sling Eqpt. - Flat Track | 1 | |
| G27042-97 | Sling eqpt-flap track | 1 | |
| G27043-120 | Handling Eqpt - Horizontal Stabilizer Actuator | 1 | |
| G27043-210 | HORIZ STAB ACTUATOR REMOVE/INSTALL EQPT | 7 | |
| G27049-74 | G27049-74 B REM/INSTL EQPT-OUTBOARD T.E. FLAP NOTES: G27049-35 IS REPLACED BY G27049-74 | 5 | |
| G27064-31 | ADAPTER - TRAILING EDGE FLAP ACTUATOR, REMOVAL/INSTALLATION (CE) | 5 | |
| G27073-1 | Bootstrap clamp eqpt-fairing T.E. flap track | 5 | |
| G27079-1 | Rmvl/Instl Eqpt-FWD Attach Fitting, Inbd TE Flaps | 3 | |
| G27082-1 | Torque Adapter - Flap Track Installation | 1 | |
| G27082-12 | TORQUE ADAPTER - FLAP TRACK INSTALLATION | 1 | |
| G27090 | REM/INSTL ADAPTER-INBOARD ELEVATOR ACTUATOR | 1 | |
| G27090-1 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 2 | |
| G27090-54 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 1 | |
| G27095 | LADDER EQPT-UPPER LOBE ACCESS,STA 2598.0 | 1 | |
| G27095-1 | Ladder eqpt-upper lobe access，sta 2598.0 | 4 | |
| G27098-1 | Hoisting Eqpt-Inboard Trailing Edge Flap Actuator | 1 | |
| G27098-42 | Hoisting Eqpt - Inbd TE Flap Actuator Pos 4 and 5 | 5 | |
| G27099-1 | Checking eqpt-ball nut，T.E. flap drive，tracks 4 and 5 | 3 | |
| G27100-1 | Hose eqpt-freeplay check，rudder actuator | 2 | |
| G32009-46 | REST EQPT - RET ACT | 2 | |
| G32017 | TORQUE EQPT -0 TRUCK POSITIONER ACTUATOR, WING | 1 | |
| G32028-116 | WING/BODY GEAR JACK EQPT | 4 | |
| G32028-117 | WING/BODY GEAR JACK EQPT | 5 | |
| G32028-141 | WING/BODY GEAR JACK EQPT | 1 | |
| G32028-146 | WING/BODY GEAR JACK EQPT | 2 | |
| G32028-164 | WING/BODY GEAR JACK EQPT | 5 | |
| G32037 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 1 | |
| G32046-1 | Removal/installation eqpt-retract actuator，BLG | 5 | |
| G32050 | HOIST EQPT-RETRACT ACTUATOR,NLG | 1 | |
| G32050-1 | Hoist Eqpt - Retract Actuator NLG | 4 | |
| G32060-1 | Torque adapter-rod end，body landing gear，hydraulic actuator | 2 | |
| G34002-1 | Calibration Eqpt - Angle Of Attach Sensors | 22 | |
| G34002-2 | Calibration Eqpt - Angle of Attack Sensor | 2 | |
| G34002-3 | CALIBRATION EQPT -0 ANGLE OF ATTACH SENSOR | 4 | |
| G34002-4 | Calibration Eqpt - Angle of Attach Sensor | 4 | |
| G34002-5 | Calibration eqpt-angle of attack sensor | 7 | |
| G36045-1 | Test eqpt-pack instl，A/C pack | 2 | |
| G38004-13 | EQUIPT - REMOVAL, VACUUM LAVA | 15 | |
| G38006 | BLOCKAGE REMOVER EQPT-VACCUM WASTE SYSTEM | 1 | |
| G38006-1 | Blockage Removal Eqpt - Vac Waste System | 16 | |
| G38008-1 | Platform eqpt-waste tank access，upper deck | 2 | |
| G4-PT-8T-MW | G4-PT-8T-MW;Gen4-PT-8T Annual Maintenance Contract | 1 | |
| G4-PT-IMAGE-DRV | G4-PT-IMAGE-DRV;Replacement OS Drives with Images for Gen4 Portables - 2 Drives | 1 | |
| G4-PT-UNIMAGED-SSD | G4-PT-UNIMAGED-SSD;Replacement OS Drives with No Image for Portable | 1 | |
| G52009 | TEST ADAPTER-ACTUATOR ACCESS DOOR LATCH | 1 | |
| G52015 | TEST EQPT -0 ACTUATOR, ACCESS DOOR LATCH | 1 | |
| G52015-11 | TEST EQPT, ACTUATOR, ACCESS DOOR LATCH | 1 | |
| G52015-12 | TEST EQPT-ACTUATOR | 10 | |
| G52015-17 | Test eqpt-actuator，access door latch | 4 | |
| G52038-1 | G52038-1 A SLING EQPT-BULK CARGO DOOR NOTES: 2OHME65B01857 IS REPLACED BY G52038-1 | 2 | |
| G57012-1 | Spotface Eqpt - Corrosion Removal Wing Box Skins | 4 | |
| G600-256201-41 | Kit - Portable Sarsat Beacon Test Set (Optional) | 1 | |
| G600-320008-1 | ADAPTORS - MLG ACTUATOR NUT | 1 | |
| G600-323001-1 | KIT-MLG SIDE STAY PIN EXTRACTION-GSE 32-30-04 (OPTIONAL IF REQUIRED) | 3 | |
| G600−270052−1 | FLAP ACTUATOR TQ CHECK ADAPTER | 5 | |
| G601R071001-1 | Jacking Pad Assy (Optional) | 10 | |
| G601R071001−1 | ADAPTER, JACK | 10 | |
| G601R072003-1 | Ballast Assy - Nose Jack (Optional) | 3 | |
| G601R101213−1 | Cover − Complete Nacelle (LH) (Optional) | 1 | |
| G601R101213−2 | Cover − Complete Nacelle (RH) (Optional) | 1 | |
| G601R242300-1 | ADG BACKDRIVE ADAPTER | 1 | |
| G601R242301−1 | Tool − ADG Actuator Travel Measuring (Optional) | 2 | |
| G601R274205−1 | Tool − Horizontal Stabilizer Trim Actuator Bellows (Optional) | 4 | |
| G601R783002-1 | Activation Kit - Bleed Air. Thrust Reverser (Optional) | 4 | |
| G601R783003-1 | ADAPTER - BLEED AIR THRUST REVERSER ACTIVATION | 1 | |
| G601R783003−1 | Adaptor − Bleed Air T/R Activation | 1 | |
| G670071000-1 | JACKING POINT ADAPTER | 5 | |
| G700-071001-1 | Pads - Jacking Wing/Fuselage (Optional Part Number) | 4 | |
| G700-101236-1 | KIT - PLUG, NACA SCOOPS (FUSELAGE) (OPTIONAL PART NUMBER) | 2 | |
| G700050126 | G700050126;CA5G AC/DC power adapter_160 W_19 V | 1 | |
| G700050127 | G700050127;OneAdvisor-800 AC/DC Power Adapter 160 W 19 V | 1 | |
| G71024-1 | ADAPTER EQUIPMENT - FAN THRUST REVERSER ACTUATOR BACKLASH TEST, JT9D ENGINE | 1 | |
| G710550326 | G710550326;AC/DC Power Adapter | 1 | |
| G76002-15 | PROTRACTOR ADAPTER | 9 | |
| G76002-15U | PROTRACTOR ADAPTER, UPGRADED | 1 | |
| G76002-19 | PROTRACTOR ADAPTER | 14 | |
| G76002-42 | PROTRACTOR ADAPTOR | 8 | |
| GA-2 | GAUGE ADAPTOR, 1/2 IN. NPT GAUGE PORT, 10,000 PSI ENERPAC CATALOG | 2 | |
| GAR520C7 | RECEPTACLE, DZUS (FUEL GALLEY PANEL) | 1 | |
| GAX5 | ADAPTOR,INDUSTRIAL FINISH,(F) ½”X3/8” (M), LENGTH 1 ½” | 1 | |
| GB900-315-060 | JACK ASSY' HELICOPTER LIFTING | 1 | |
| GB908020000 | JACK AND ADAPTER | 1 | |
| GC72450522 | GC72450522;AC/DC Adapter | 1 | |
| GE USM GO Flaw and Thickness detector | GE USM GO Flaw and Thickness detector - Ultrasonic flaw detector & thickness gauge, Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability, Video recording upto 8 minutes | 1 | |
| GE-FQAP-622 KIT | CF6-50 STAGE 3 LPT DISK FWD SPACER ARM INSPECTION | 1 | |
| GEN40-85-1P230 | POWER SUPPLY - PROGRAMMABLE DC (STANDARD OPTION, SINGLE PHASE AC INPUT) | 2 | |
| GFAT1E | FEMALE ADAPTER 3/8 MACHO 1/4 | 4 | |
| GFATIE | ADAPTER SOCKET 3/8" FEMALE END X 1/4" MALE END BLACK | 1 | |
| GG0570003-003 | PADS-JACKING, ADAPTER ASSY WING/FUSE | 1 | |
| GLAS1F2 | REPLACEMENT ADAPTER (1/2"SQUARE BIT) | 1 | |
| GMA5613 | ADAPTER,AIRCRAFT JACKING POINT | 1 | |
| GMGJAK | ALBERTH AVIATION MAIN GEAR JACK ADAPTER KIT PN: GMGJAK | 1 | |
| GNSSRK | REPEATER KIT; INCLUDES GA30-V AMPLIFIER MODULE, S440 GNSS ANTENNA, N-JK-G ARRESTER, GRA10-NF INDOOR ANTENNA, LMR/KSR240 L=20MTR (NM-NM) INDOOR CABLE SET, RG8 L=30MTR (NM-TM) OUTDOOR CABLE SET, OUTDOOR ANTENNA MOUNTING STAND AND POWER ADAPTER MANUFACTURER: | 1 | |
| GP-10S | HYDRAULIC FORCE AND PRESSURE 4 " FACE DIA, 1/2 NPTF, BTM CONN, SS, GLYCRN FILLED GAUGE, 10,000 PSI, 700 BAR ENERPAC CATALOG | 4 | |
| GR000066 | ADAPTOR,EXTRACTION BLOCK | 1 | |
| GS10596 | ADAPTER BACKLASH | 1 | |
| GS13237-1 | ACM FLOW CONTROL VALVE ADAPTER | 4 | |
| GS18300 | BALACE INDICATOR ADAPTER | 2 | |
| GS20782-1 | ADAPTOR TQ (PROP ASSY ATTACH TO GEARBOX NUT R/I) | 12 | |
| GS20865-1 | ADAPTER, INTERFACE 14RF CONTROL TO ENGINE & GEARBOX | 1 | |
| GS21989 | Adapter, Jack | 1 | |
| GS21989-1 | JACK ADAPTER | 1 | |
| GS24194-1 | PROTACTOR ADAPTER | 1 | |
| GS26802 | ADAPTOR - ACM TORQUE CHECK | 1 | |
| GSB0700007 | ADAPTER-JACK | 5 | |
| GSB0700017 | ADAPTER - JACK, WING | 2 | |
| GSB3251005 | ADAPTOR KIT FOR PROTRACTOR-NLG STEERING ANGLE | 3 | |
| GSB3251005-IAS | ADAPTOR KIT NLG STEERING PROTRACTOR Q100,200,300 | 1 | |
| GSE017 | ADAPTER,JACKING-WING | 1 | |
| GSE026 | JACK ADAPTERS(GSE026 | 1 | |
| GSE0700033 | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| GSE0700486 | JACK PAD ADAPTER- | 1 | |
| GSE291 | COVER - PROT, EXT AC POWER RECEPTACLE | 1 | |
| GSE3200486 | AXLE JACK ADAPTER | 1 | |
| GSE3200841 | LANDING GEAR STRUT BLEED JACK (OPTIONAL) | 1 | |
| GSE397 | WIRELESS USB, DUAL MODE ADAPTER/ACCESS POINT, 54MB | 1 | |
| GSE507 | LOW PRESSURE GAUGE 0-200 PSI .4.5 INCH DIAL BACK SIDE CONNECTOR.1/2 INCH BSPT | 1 | |
| GSE508 | PRESSURE GAUGE 0-5000 PSI .4.5 INCH DIAL BACK SIDE CONNECTOR.1/2 INCH BSPT | 1 | |
| GSE635531-002 | ACCEPTANCE TEST STAND | 1 | |
| GSP-9330 TG | SPECTRUM ANALYZER; 3GHZ SPEED UPTO 204US MANUFACTURER: GW INSTEK | 1 | |
| GSV1T-MACS-3YEAR | GSV1T-MACS-3YEAR;GIGASTOR 1T Annual 3-year Subscription for Azure Cloud | 1 | |
| GSV1T-MACS-ANNUAL | GSV1T-MACS-ANNUAL;GIGASTOR 1T Annual 1-year Subscription for Azure Cloud | 1 | |
| GSV1T-MACS-PERPETUAL | GSV1T-MACS-PERPETUAL;GIGASTOR 1T Perpetual Subscription for Azure Cloud | 1 | |
| GSV1T-SUB-LIC-ADD-1PK | GSV1T-SUB-LIC-ADD-1PK;GSV1T Cloud Monitor - Monthly Subscription License - 1 Pack | 1 | |
| GSV1T-SUB-LIC-ADDER-5PK | GSV1T-SUB-LIC-ADDER-5PK;GSV1T Cloud Monitor - Monthly Subscription License - 5 Pack | 1 | |
| GT110 | TRACTOR - TOW - 72,000 DRAWBAR PULL - 90,000 GVW STANDARD (THE "STANDARD" IS NOT RECOMMENDED) - THE OPTIONAL 78,000 DRAWBAR PULL IS RECOMMENDED - 78,000 DRAW BAR PULL IS AVAILABLE AT 100K, 110K AND 120K GVW. 81.5" CAB HEIGHT | 1 | |
| GTH-10-R | EUROCOPTER S-62 Nose Jack | 1 | |
| H1023-1 | PAD: ADAPTER,JACK,NEOPRENE, | 1 | |
| H21969 | ATR / ADAPTER JACK | 11 | |
| H294 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 3 | |
| H326-H337N_PT-6A/41/42 | H337N interface kit for PT-6A / 41 & / 42 engines | 1 | |
| H394-115 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 2 | |
| H394R | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 8 | |
| H47682 | ADAPTOR SETS (WHEEL REPLACEMENT) 17 TON AXLE JACK FOR A319 NLG WHEEL REPLACEMENT | 43 | |
| H47786 | FALCON STAINLESS MAIN GEAR JACK ADAPTER | 1 | |
| HBS48-16 | Tennsmith® Bench Brakes (Capacity: 16 ga.) (Maximum bend length: 48-1/4") (Maximum box depth: -) (Minimum reverse bend: 1/4") (Shipping weight: 460 lbs (209 kgs)) (Add to cart: Add To Cart) | 1 | |
| HBU48-12 | Tennsmith® Bench Brakes (Capacity: 16 ga.) (Maximum bend length: 48-1/4") (Maximum box depth: -) (Minimum reverse bend: 1/4") (Shipping weight: 460 lbs (209 kgs)) (Add to cart: Add To Cart) (Capacity: 12 ga.) (Maximum bend length: 48-1/4") (Maximum box de | 2 | |
| HBU48-16 | Tennsmith® Bench Brakes (Capacity: 16 ga.) (Maximum bend length: 48-1/4") (Maximum box depth: -) (Minimum reverse bend: 1/4") (Shipping weight: 460 lbs (209 kgs)) (Add to cart: Add To Cart) (Capacity: 12 ga.) (Maximum bend length: 48-1/4") (Maximum box de | 1 | |
| HC-2023-228 | RING: BACKUP,PTFE, | 1 | |
| HC-2023-232 | RING: BACKUP,PTFE, | 1 | |
| HC130H0071-000 | Adaptor - torque loading, pylon front attachement bolts | 1 | |
| HC130H0148-000 | Receptacle - airbrake alignment of spigot housing | 2 | |
| HC132H0006-000 | MAIN JACKING PAD ADAPTOR | 4 | |
| HC132H0060-000 | Adaptor Nose Wheel Jack (tyre shed) | 3 | |
| HC132H0060/200 | NLG JACK ADAPTOR | 1 | |
| HC132H0061-000 | ADAPTOR, JACKING | 1 | |
| HC132H0061-002 | ADAPTOR, JACKING | 1 | |
| HC132H0061-006 | Adaptor main wheel jack (shed/normal) | 1 | |
| HC132H0278-000 | Bracket -jack adaptor | 1 | |
| HC2020-336 | RING: BACKUP,PTFE, | 2 | |
| HC2020-346 | RING: BACKUP,PTFE, | 1 | |
| HC2021-01 | RING: BACKUP,PTFE, | 1 | |
| HC2023-042 | RING: BACKUP,PTFE, | 2 | |
| HCS1219 | HEAT BLANKET RECEPTACLE | 1 | |
| HCU200-AC-ADPTR-BRICK | HCU200-AC-ADPTR-BRICK;OPT HCU200 AC POWER ADAPTER BRICK FORM | 1 | |
| HCU200-FULL-BNC | HCU200-FULL-BNC;HCU200BNC with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-BNC-ENC | HCU200-FULL-BNC-ENC;Encore HUC200BNC with Full Mactrak and AC Adapter | 1 | |
| HCU200-FULL-F | HCU200-FULL-F;HCU200F with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-F-ENC | HCU200-FULL-F-ENC;Encore HUC200F with Full Mactrak and AC Adapter | 1 | |
| HCU200-LITE-UPG | HCU200-LITE-UPG;Sw options QAMTRak Mactrak PerFMon | 1 | |
| HCU200-MACTRAK | HCU200-MACTRAK;MACTRAK SW OPTION | 1 | |
| HCU200-OPT | HCU200-OPT;Optical SFP interface for HCU200 | 1 | |
| HCU200MCMON | HCU200MCMON;MACTRAK PERFORMANCE MONITORING OPTION NEW | 1 | |
| HCU200MCMON-UPG | HCU200MCMON-UPG;HCU200 MACTRAK PERFORMANCE MONITORING OPTION FIELD UPGRADE | 1 | |
| HDE-1213757 | 1.5 Ton Battery Unit w/ Double Action Head Adapter | 1 | |
| HDE-1213757C | Double Action Head Adapter | 1 | |
| HGPU25-30-2S | HPU 3 PHASE / 380VAC / 50HZ COMPLETED WITH ADAPTOR COUPLING KIT | 1 | |
| HGPU50-30-1S | HYDRAULIC GROUND POWER UNIT WITH : -OPTION- H; - OPTION-S; -ACCESSORY- 04 ; - ADAPTER HOSE KIT-B737 CLASSIC. | 2 | |
| HJ-557 | Tronair HJ-557 Raytheon BeechJetDiamond Main & Nose Gear Tripod Jack Pad Adaptor | 5 | |
| HJ532-01 | PAD: ADAPTER,JACK, | 1 | |
| HJ532-02 | PAD: SM,ADAPTER,JACK | 2 | |
| HJ557 | PAD: ADAPTER,JACK, | 5 | |
| HM0917275 | ADAPTER-R/1,DRAGBRACE,MLG | 1 | |
| HMF-BG-135-200.01 | OIL RECEPTACLE | 1 | |
| HP-6000-34 | LIFT ADAPTER SAC 269 STND | 1 | |
| HRT100 | BAC Helicopter Rear Towbar, 25 ft L, Powder-Coated, Orange, For BDW-AT Wheels | 2 | |
| HRT100B | BAC Helicopter Rear Towbar, 25 ft L, Powder-Coated, Orange, For BDW-AT Wheels | 2 | |
| HS1009KD | ADAPTER JACK - SAFETY JACKING // TAIL JACK (ØA = 24.5) | 1 | |
| HS7950 | RACHET ADAPTER | 1 | |
| HS9232 | ADAPTER, MOUNTING ACTUATOR | 1 | |
| HS9233 | ADAPTER ACTUATOR MONIT | 1 | |
| HS9234 | ADAPTER-MOUNTING ACTUA | 1 | |
| HS9628-15 | ADAPTER ASSEMBLY,INTERFACE DEVICE | 1 | |
| HS9628-16 | ADAPTER ASSEMBLY,INTERFACE DEVICE | 1 | |
| HS9628-9 | ADAPTER ASSEMBLY,INTERFACE DEVICE | 1 | |
| HS9644 | ADAPTER ACTUATO | 1 | |
| HST3000-RECO | HST3000-RECO;Remote Coaching Software Option | 1 | |
| HST915086 | ADDAPTOR JACK NOSE& WING | 1 | |
| HT-400-SK | PT-6 Seal Carrier Tool (Twin-Pac) Remove And Install | 2 | |
| HT-429CASQ | BAC HT-429CA TOW-BAR, FOR BELL HELICOPTERS 429 AIRCRAFTS | 1 | |
| HT-8 | BRACKETT HT-8 ORANGE BELL 212, 412, UH-1, AH-1 HELICOPTER SKID TOW BAR WITH 2" RING | 1 | |
| HT2000-1-E/1-S2 | HPU 3 PHASE / 380VAC / 50HZ COMPLETED WITH ADAPTOR COUPLING KIT | 3 | |
| HT2000-2E1S | HPU 3 PHASE / 380VAC / 50HZ COMPLETED WITH ADAPTOR COUPLING KIT | 1 | |
| HT429CA | BAC HT-429CA Tow-Bar, For Bell Helicopters 429 Aircrafts | 3 | |
| HT7MB | BAC Universal Helicopter Towbar, 140 in L, Powder-Coated, Orange | 3 | |
| HTE714-85-G | EATON HTE COUPLING RECEPTACLE | 1 | |
| HU-29 | Complete Drill Index Set - 29 Piece Fractional Set - Empty Case Only | 1 | |
| HU-55 | 10 Piece Screw Extractor Set - Empty Case Only | 1 | |
| HU20828 | JAW FOR EXTRACTOR LPT EXHAUST CASE HOLLOW PINS | 1 | |
| HU25453 | EXTRACTOR ADAPTER | 1 | |
| HU28499 | EXTRACTOR ADAPTOR | 4 | |
| HU29326 | Extractor Adaptor | 1 | |
| HU33571 | EXTRACTOR ADAPTER | 1 | |
| HU33643 | EXTRACTION ADAPTER | 2 | |
| HU35004 | Taper Bolt Extractor - IPT | 1 | |
| HU35451 | ADAPTOR - EXTRACTOR NOSE SPINNER ASS | 13 | |
| HU36560 | EXTRACTOR ADAPTOR | 2 | |
| HU37005-1 | Impact extractor adaptor | 1 | |
| HU37594 | EXTRACTOR ADAPTOR | 14 | |
| HU37863 | Extractor Adapter | 1 | |
| HU38735 | ADAPTOR - EXTRACT | 1 | |
| HU39652 | EXTRACTOR-ADAPTOR | 6 | |
| HU41025-1 | EXTRACTOR ADAPTER | 1 | |
| HU41069 | EXTRACTOR ADAPTER | 1 | |
| HU41070 | EXTRACTOR ADAPTER | 1 | |
| HU41073 | EXTRACTOR ADAPTER | 1 | |
| HU41075 | EXTRACTOR ADAPTER | 1 | |
| HU41551 | ADAPTOR-EXTRACT AIR INTAKE SPINNER | 2 | |
| HU42375 | IMPACT ADAPTOR PN HU42375 (WEDGE) | 6 | |
| HU44807 | ADAPTOR - INTERFACE | 1 | |
| HU44819 | EXTRACTOR ADAPTER-SLIDER ASSEMBLY FROM FAN DISC | 10 | |
| HU45296 | EXTRACTION ADAPTOR | 1 | |
| HU45457 | Extractor adaptor | 1 | |
| HU50307 | EXTRACTOR ADAPTOR VSV ACTUATOR | 2 | |
| HU50307-1 | Extractor - Adapter, VSV Actuator | 1 | |
| HU50458 | ADAPTER - EXTRACT | 1 | |
| HU51166 | EXTRACTOR,ADAPTOR | 5 | |
| HU55007-1 | UPS ADAPTER, ENGINE MOUNT BRACKET | 4 | |
| HU56211-4 | ADAPTER GEARBOX CRADLE TO JACK | 1 | |
| HU56211-5 | ADAPTER ADAPTER GEARBOX CRADLE TO JACK | 1 | |
| HU56214 | ADAPTER, GEARBOX ACCESSORIES | 1 | |
| HU56216 | ADAPTER-TROLLEY JACK | 1 | |
| HU56216-2 | ADAPTER-TROLLEY JACK | 1 | |
| HU56217 | ADAPTER-JACK | 1 | |
| HU56217-1 | ADAPTER-JACK | 1 | |
| HU89025-5/10 | ATTACHMENT/LIFTING ADAPTOR | 1 | |
| HW93735A | 25 TON TRUCK JACK W/3IN ADAPT | 1 | |
| IA3202 | ADAPTER BRAKE (HARBOR ACTION, INC.) | 1 | |
| IAE 1P16354 | IAE 1P16354 VACUUM TEST ADAPTER | 1 | |
| IAE1F10022 | Jack & adapter | 5 | |
| IAE1F10208 | Adapter，lifting intermediate case bracket | 3 | |
| IAE1J12000 | Engine Attach Adapter - Lifting Bracket | 10 | |
| IAE1M14084 | FIXTURE, SUPPORT - ENGINE ASSY, LPT ACC PIPING UPPER/LOWER CONECTOR TUBES. | 5 | |
| IAE1M14113 | WRENCH LPT ACC TUBE I/R | 5 | |
| IAE1M14115 | GAUGE- CHECKING GO LPT ACC 3 & 8 CASE | 2 | |
| IAE1M14116 | GAUGE- CHECKING NO GO LPT ACC | 2 | |
| IAE1M14117 | GAGE, CHECKING-GO/NO GO - ENGINE ASSY, LPT ACC PIPING CONECTOR TUBE | 11 | |
| IAE1M14118 | GAUGE, CHECKING - GO/NO GO - ENGINE ASSY, LPT ACC PIPING CONNECTOR TUBE | 9 | |
| IAE1M14121 | GO NO GO GAUGE LPT ACC | 9 | |
| IAE1M14122 | GO NO GO GAUGE LPT ACC | 8 | |
| IAE1M14232 | BLANACE ADAPTER | 1 | |
| IAE1P16354 | ADAPTER, VACUUM TEST | 1 | |
| IAE1R18686 | ADAPTER, VANE ACTUATING | 1 | |
| IAE1R18687 | ADAPTOR, VANE ACTUATING | 1 | |
| IAE2F10411 | ADAPTER - VACUUM TEST | 1 | |
| IAE2M14186 | GAGE, INSPECTION - ENGINE ASSY, LPT-ACC, PERI-SEAL RING | 3 | |
| IAE2M14187 | GAGE, INSPECTION - ENGINE ASSY, LPT-ACC, PERI-SEAL RING | 3 | |
| IAE9F10053 | Adapter,dead load test bracket tec | 1 | |
| IAG-249-01 | SPACER - HPT BALANCING SHAFT | 1 | |
| IDL61-453 | 2000/200AAC CLMP ADPTR | 1 | |
| IDL61-455 | 500AAC CLMP ADPTR FOR 61-805 | 1 | |
| IE-20B | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| IF6C5X1-8 | MICROMETER, OPTICAL (ACCURACY /-.001 INCH) FIBERSCOPE - FLEXIBLE BORESCOPE MICROMETER - DEPTH, 0-2 IN (0-51MM), READABLE TO 1/1000 IN (0.025 MM) | 1 | |
| IFF-7300S | IFF/Crypto/TACAN Automated Test System | 1 | |
| IFR4000Opt1 | [Cost for Option Only] ELT (121.5/243 MHz Beacon & 406 MHz COSPAS/SARSAT Beacon Test) | 6 | |
| IM1282 | 4IN IMPACT SOCKT 6PT 3/4 SQ DR | 1 | |
| IM35 | ADAPTOR IMPACT | 1 | |
| IM53 | ADAPTOR IMPACT | 1 | |
| IM59 | ADAPTOR IMPACT | 1 | |
| IM72 | ADAPTOR, IMPACT, PIN | 2 | |
| IMD160A | SOCKET IMPACT SHALLOW 12 PT 1/2 DRIVE 1/2 | 2 | |
| IMD180A | SOCKET IMPACT SHALLOW 12 PT 1/2 DRIVE 9/16 | 2 | |
| IMD182A | 3/4IN DR IMPACTSKT 9/16IN 12PT | 1 | |
| IMD220 | SOCKET IMPACT SHALLOW 12 PT 1/2 DRIVE 11/16 | 1 | |
| IMD222A | 3/4IN DR IMPACT SKT 11/16 12PT | 1 | |
| IMDF200 | 3/8IN DR SHALWFRACT 12PT 5/8 | 1 | |
| IMM365 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM385 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM415 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM465 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM500 | 50MM 6PT IMPACT SOCKET 1/2SQDR | 1 | |
| IMM505 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM555 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM605 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM655 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM705 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMM755 | 1-1/2DR IMPACT SOCKETS 6PT | 1 | |
| IMMD192A | 3/4 DR 12PT 19MM IMPACT SKT | 1 | |
| IMMD212 | 3/4 DR 12PT 21MM IMACT SKT | 1 | |
| IMMD232 | 3/4 DR 12 PT 23MM IMPACT SKT | 1 | |
| IMMD252 | 3/4 DR 12 PT 25MM IMPACT SKT | 1 | |
| IMMD262 | 3/4 DR 12 PT 26MM IMPACT SKT | 1 | |
| IMMD282 | 3/4 DR 12 PT 28MM IMPACT SKT | 1 | |
| IMMD292 | 3/4 DR 12 PT 29MM IMPACT SKT | 1 | |
| IMMD302A | 3/4 DR 12 PT 30MM IMPACT SKT | 1 | |
| IMMD312A | 3/4 DR 12 PT 31MM IMPACT SKT | 1 | |
| IMMD322A | 3/4 DR 12 PT 32MM IMPACT SKT | 1 | |
| IMMD332 | 3/4 DR 12 PT 33MM IMPACT SKT | 1 | |
| IMMD342 | 3/4 DR 12 PT 34MM IMPACT SKT | 1 | |
| IMMD352 | 3/4 DR 12 PT 35MM IMPACT SKT | 1 | |
| IMMD362 | 3/4 DR 12 PT 36MM IMPACT SKT | 1 | |
| IMMD382 | 3/4 DR 12 PT 38MM IMPACT SKT | 1 | |
| IMMD402 | 3/4 DR 12 PT 40MM IMPACT SKT | 1 | |
| IMMD412 | 3/4 DR 12 PT 41MM IMPACT SKT | 1 | |
| IMMD422 | 3/4 DR 12 PT 42MM IMPACT SKT | 1 | |
| IMMD432 | 3/4 DR 12 PT 43MM IMPACT SKT | 1 | |
| IMMD462 | 3/4 DR 12 PT 46MM IMPACT SKT | 1 | |
| IMMD502 | 3/4 DR 12 PT 50MM IMPACT SKT | 1 | |
| IMXA42 | IMPACT ADPTR | 2 | |
| IN240VACOUT12VDC1.5A | AC/DC ADAPTER | 1 | |
| IPEH-002022 | CAN INTERFACE ADAPTER FOR USB | 2 | |
| IPLEX G LITE IV9635GL | VIDEOSCOPE; VIEWING DIRECTION: FRONTAL; VIEWING DIRECTION: LATERAL; DEPTH OF FIELD RANGE: 2 TO 200 MM; POWER SUPPLY: 100-240 VAC; FUNCTIONS: RECORDING; FUNCTIONS: MEASUREMENT; FUNCTIONS: SCALAR MEASUREMENT; FUNCTIONS: STEREO MEASUREMENT; FUNCTIONS: CAMERA | 1 | |
| IPLEX NX | OLYMPUS IPLEX NX VIDEOSCOPE ;VIEWING DIRECTION: FRONT ;VIEWING DIRECTION: SIDE ;DEPTH OF FIELD RANGE: 4 TO INFINITY MM ;POWER SUPPLY: 100-240 V AC ;FUNCTIONS: CAMERA CONTROL UNIT (CCU) | 1 | |
| IPPLP4104-10 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-10) | 1 | |
| IPPLP4104-14 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-14) | 1 | |
| IPPLP4104-6 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-6) | 1 | |
| IPPLP4104-7 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14104-7) | 1 | |
| IR224UN-LN96 | USB INTERFACE RAW-IR ADAPTER | 1 | |
| IRT1360 | JACKING ADAPTER KIT | 1 | |
| IS1000118M9922-12 | MAINS MULTI-PLUG ADAPTER PACE 1000 | 1 | |
| IT280-4 | FIXTURE-THS NORCO RECEPTACLE | 1 | |
| IV8435 | BOROSCOPE; RIG; SOURCE: MULTIPLE LED LIGHTS (NO FILTER); POWER SUPPLY: 100/240V AC MANUFACTURER: OLYMPUS OPTICAL LTDA. | 1 | |
| IV86 | OPTICAL ADAPTER, CODE NUMBER: IV86 MANUFACTURE: IMLEX | 1 | |
| IV9635GL | VIDEOSCOPE ;VIEWING DIRECTION: FRONT ;VIEWING DIRECTION: SIDE ;DEPTH OF FIELD RANGE: 2 TO 200 MM ;POWER SUPPLY: 100-240 VAC ;FUNCTIONS: RECORDING TP: OLYMPUS IPLEX G LITE IV9635GL | 1 | |
| IV96G-AT60D/60D | ADAPTOR, ACCESSORY FOR IV9435GX | 1 | |
| J02998 | GAUGE,PRESSURE,2 1/2IN FACE SIZE,0 TO 160PSI RANGE, FACE SCALE UNITS PSI/KPA,SS CASING,316SS BOURDON TUBE, TIP AND SOCKET, HELICAL TUBE,1/4IN,NPT PN: J02998 OEM: ASHCROFT | 1 | |
| J03562 | VALVE,FLOW REGULATING,1IN FNPT,316SS BODY,PACKED BONNET,DELRIN SEAT 5/8IN ORIFICE PN: J03562 OEM: CENTURY VALVE & MACH | 1 | |
| J07001-13 | JACK ADAPTER | 1 | |
| J07001-25 | JACK ADAPTER | 11 | |
| J07001-9 | JACK ADAPTER | 1 | |
| J07002-1 | ADAPTER JACK WING IN | 12 | |
| J07003-1 | Jack Adapter | 10 | |
| J07004-13 | JACKING EQPT | 1 | |
| J07004-15 | EMERG JACKING EQPT | 1 | |
| J07004-23 | JACKING EQPT | 1 | |
| J07004-23-HM | HYDRO MFD PARTS-JACKING EQPT | 1 | |
| J07004-23-M | JACKING EQPT | 1 | |
| J07004-25-HM | HYDRO MFD PARTS-JACKING EQPT | 1 | |
| J07004-59 | JACKING EQPT | 9 | |
| J07004-59-HM | HYDRO MFD PARTS-JACKING EQPT | 1 | |
| J07005-34 | JACKING EQPT | 1 | |
| J07009-1 | JACKING EQPT - MLG | 1 | |
| J07013-1 | JACKING EQPT-MLG EMERGENCY | 10 | |
| J07013-1 REV.A | JACKING EQUPT. - MLG AXLE | 1 | |
| J07013-1-M | JACKING EQPT-MLG EMERGENCY | 1 | |
| J07016-1 | Fitting eqpt-jack,inner wing(point e&f) | 1 | |
| J07017-1 | Fitting eqpt-jack,outer wing(point g&h) | 1 | |
| J12001-21 | LADDER-MAIN EQUIPT.CTR.ACCESS DOOR | 4 | |
| J20001-60 | HOIST EQPT LINE REPLACEABLE UNIT (LRU) | 2 | |
| J20001-62 | HOIST EQPT LINE REPLACEABLE UNIT (LRU) | 6 | |
| J20002-1 | LOAD EQPT-ENG ACCESSORIES | 3 | |
| J20002-36 | Load Eqpt-Eng Access | 1 | |
| J20009 | JACKING EQPT-HYDRAULIC TELESCOPING | 2 | |
| J20009-109 | Jacking eqpt-hydraulic telescoping | 11 | |
| J20009-110 | HYDRAULIC JACK EQUPT | 12 | |
| J20009-132 | ADAPTER - HOIST, AIR CONDITIONING PACK | 1 | |
| J20009-136 | ADAPTER - CRADLE, INTERFACE | 9 | |
| J20009-140 | Jacking eqpt-hydraulic telescoping | 2 | |
| J20009-38 | JACKING EQPT-HYD TELESCOPING | 2 | |
| J20009-38(~?) | JACKING EQPT -0 HYDRAULIC TELESCOPING | 2 | |
| J20009-50 | Jacking Adaptor - APU Cradle | 13 | |
| J20009-64 | Jacking Adaptor - APU Cradle | 4 | |
| J20009-68 | JACKING ADAPTER ASSY | 15 | |
| J20009-70 | JACKING EQPT - HYDR | 7 | |
| J20009-88 | Cradle Adapter - Jacking Eqpt | 9 | |
| J20011-1 | Interface Adapter | 7 | |
| J20998 | GAUGE,PRESSURE,2 1/2IN FACE SIZE,0 TO 160PSI RANGE,FACE SCALE UNITS PSI/KPA,SS CASING,316SS BOURDON TUBE,TIP AND SOCKET,HELICAL TUBE,1/4IN,NPT PN: J02998 OEM: ASHCROFT | 1 | |
| J21001 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-132 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 8 | |
| J21001-133 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-134 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-136 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 3 | |
| J21001-137 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 3 | |
| J21001-138 | ACM ADAPTER ASSY | 4 | |
| J21001-154 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 5 | |
| J21001-155 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 4 | |
| J21001-156 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 4 | |
| J21001-181 | Jacking/Hoist Adapter Eqpt - Air Conditioning Pack | 1 | |
| J21001-182 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-183 | Fishpole Hoist Adapter Eqpt - Air Conditioning Pack | 1 | |
| J21001-2 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-3 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-72 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 1 | |
| J21001-73 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 1 | |
| J21001-76 | ACM ADAPTER | 1 | |
| J21001-79 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 5 | |
| J21001-80 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 7 | |
| J21001-81 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-82 | HOIST ADAPTER - AIRCOND PACK | 5 | |
| J21001-84 | ACM ADAPTER ASSY | 2 | |
| J21001-94 | Hoist adapter eqpt-air conditioning pack | 1 | |
| J2100180 | ADAPTOR-HOIST,AIR CONDITION PACK | 7 | |
| J21002-1 | PROOF LOAD EQUIPMENT - HOIST ADAPTER EQUIPMENT, A/C PACK | 5 | |
| J24001-50 | Adapter - Backup Generator (VSCF), PW, GE, RR Engine VSCF | 11 | |
| J24019-1 | Hoist adapter-backup generator | 6 | |
| J24019-2 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J24019-3 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J27005-48 | LOCK EQPT - INBD / OUTBD SPOILER ACTUATOR | 9 | |
| J27005-48 repair | Lock eqpt-inbd/outbd，spoiler actuator | 1 | |
| J27005-64 | Lock eqpt-inbd/outbd，spoiler actuator | 7 | |
| J27007 | HOIST EQPT-HORIZ STABILIZER,TRIM ACTUATOR | 1 | |
| J27007-15 | Hoist eqpt-horiz stabilizer，trim actuator | 5 | |
| J27007-7 | Hoist Eqpt - Horizontal Stabilizer, Trim Actuator | 8 | |
| J27053-30 | Test eqpt-L.E. rotary actuators | 1 | |
| J27055-17 | Axial load eqpt-flap actuation torque brake | 1 | |
| J27061-1 | Overhaul Eqpt - Stab Trim Actuator | 3 | |
| J27062-1 | Overhaul eqpt-spring stack，flap actuation xmsn | 1 | |
| J27067-108 | Assy/disassy eqpt-flap actuation transmissions | 3 | |
| J27067-109 | Backlash eqpt 1 | 1 | |
| J27067-110 | Backlash eqpt 1 | 1 | |
| J27067-111 | Backlash eqpt 1 | 1 | |
| J27067-112 | Backlash eqpt 1 | 1 | |
| J27068-83 | TEST EQPT -0 T.E. FLAP ACTUATION TRANSMISSIONS | 1 | |
| J27069-1 | BACKLASH CHECK EQPT | 1 | |
| J27070-1 | Fixture Eqpt - Stabilizer Trim Actuator | 4 | |
| J27071-1 | Overhaul Eqpt - Free Play Check Stab Trim Actuator | 1 | |
| J27072-1 | ADAPTER - TEST, SPOILER AUXILIARY RETRACTION DEVICE (SARD) SYSTEM | 13 | |
| J27078-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 11 | |
| J30002-1 | ADAPTER CABLE - PMAT(PORTABLE MAINTENANCE ACCESS TERMINAL) TO RJ-45 | 1 | |
| J32009 | REPLACEMENT EQPT NLG LOWER SEALS | 1 | |
| J32009-1 | REPLACEMENT EQPT | 1 | |
| J32009-29 | REPLACEMENT EQPT | 6 | |
| J32009-29-M | REPLACEMENT EQPT | 1 | |
| J32009-4 | REPLACEMENT EQPT - NLG LOWER SEALS | 3 | |
| J32009-45 | REPLACEMENT EQPT | 6 | |
| J32009-49 | Replacement Eqpt - NLG Lower Seals | 7 | |
| J32014-116 | REPLACEMENT EQPT - LOWER | 11 | |
| J32014-116-M | REPLACEMENT EQPT -0 LOWER | 1 | |
| J32014-26 | REPLACEMENT EQPT | 1 | |
| J32014-29 | REPLACEMENT EQPT | 1 | |
| J32014-89 | REPLACEMENT EQPT - LOWER | 1 | |
| J32016-1 | PULLER EQPT - PIN, RETRACT | 4 | |
| J32019 | SLING EQPT. RETRACT ACTUATOR R & I MLG | 1 | |
| J32019-50 | SLING EQPT-RETRACT ACTUATOR | 3 | |
| J32019-50-M | SLING EQPT-RETRACT ACTUATOR | 1 | |
| J32019-59 | SLING EQPT-RETRACT ACTUATOR | 7 | |
| J32019-97 | Sling Eqpt - Retract Actuator R & I, MLG | 7 | |
| J32021 | REMOVAL/INSTL EQPT-RETRACT ACTUATOR,NLG | 1 | |
| J32021-20 | ADAPTOR NLG RETRACT ACTUATOR | 5 | |
| J32031-13 | PROTRACTOR EQPT | 13 | |
| J32031-3 | PROTRACTOR EQPT | 10 | |
| J32053-129 | Fixture eqpt-functional test ldg gr actr | 2 | |
| J32053-92 | Fixture eqpt-functional test ldg gr actr | 2 | |
| J32057-1 | FIXTURE EQPT, LG ACTUATOR | 1 | |
| J32057-108 | FIXTURE EQPT - LANDING GEAR,ACTUATOR ASSYS | 2 | |
| J32057-94 | Fixture Eqpt LG Actuator Assy | 1 | |
| J32066-17 | Center Jack Assy, Build-up Eqpt -MLG Truck Beam | 1 | |
| J32067-49 | ACCESSORY EQPT | 1 | |
| J32082 | RPLACEMENT EQPT.LOWER BEARING SEALS MLG | 1 | |
| J32082-1 | REPLACEMENT EQUPT. LOWER | 1 | |
| J32082-69 | REPLACEMENT EQPT | 1 | |
| J32082-69-M | REPLACEMENT EQPT | 1 | |
| J32082-69U | REPLACEMENT EQPT, UPGRADED | 1 | |
| J32082-73 | Replacement Eqpt. - Lower Bearing Seals MLG | 6 | |
| J32082-98 | Replacement eqpt-lower bearing seals，MLG | 8 | |
| J32089-1 | Fixture eqpt-hydraulic strut actuator assy，MLG | 1 | |
| J32089-124 | Fixture Eqpt - Hydraulic Strut, Act Assy, MLG | 2 | |
| J32091-4 | TEST EQPT - SENSOR FIXTURE KIT FOR B32039 STAND (WORKS WITH OPTIONAL J32091-7 MACRO SET) J32091-4 | 1 | |
| J32091-5 | TEST EQPT - SENSOR FIXTURE KIT FOR G32009 STAND (WORKS WITH OPTIONAL J32091-9 MACRO SET) | 1 | |
| J32093 | Reminstl Eqpt-Retract Actuator NLG | 1 | |
| J32093-1 | REMOVAL/INSTALLATION EQPT - NLG, RETRACT ACTUATOR (CE) | 7 | |
| J38004-232 | Pump Eqpt - Vacuum Lav System | 1 | |
| J38004-247 | Pump eqpt-vacuum lav system | 7 | |
| J38004-287 | Pump eqpt-vacuum lav system | 3 | |
| J45002-1 | ADAPTER CABLE - PORTABLE MAINTENANCE ACCESS TERMINAL (PMAT) TO RJ-45 | 2 | |
| J47549 | ADAPTOR SETS (WHEEL REPLACEMENT) 17 TON AXLE JACK FOR A319 NLG WHEEL REPLACEMENT | 43 | |
| J49005-1 | JACKING ADAPTER - APU CRADLE | 2 | |
| J51003-1 | Static Balance Eqptment – Flight Control Surfaces | 1 | |
| J51004-1 | Vacuum Generator Test Eqpt. | 6 | |
| J52023-39 | Backlash Check Eqpt - Lg Cargo Dr, Man Drive GB | 1 | |
| J52028-1 | Backlash fixture eqpt-manual drive gearbox，latch pdu，large cargo door | 1 | |
| J53001-1 | Ladder Eqpt - Empennage Access, Vertical Fin | 14 | |
| J53001-1JA | LADDER EQPT - EMPENNAGE ACCESS, VERTICAL FIN | 1 | |
| J53003-174 | Maint platform eqpt-pressure bulkhead access | 1 | |
| J53003-235 | Maintenance Platform Eqpt - Press. Bulkhead Access | 4 | |
| J53003-236 | Maintenance Platform Eqpt - Press. Bulkhead Access | 5 | |
| J54005 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 1 | |
| J54005-1 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 2 | |
| J54005-1-M | HOIST ADAPTER-BRACE DIAGONAL | 1 | |
| J54005-32 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 3 | |
| J54005-51 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL (CE) | 3 | |
| J54021-1 | Strut unload sling eqpt-diagonal brace alignment | 1 | |
| J54022-1 | Jacking eqpt-strut fuse pin unload GE9X | 1 | |
| J55004-1 | JACK EQPT HORIZONTAL STAB | 2 | |
| J55004-1-M | JACKING EQPT-HORIZONTAL | 1 | |
| J55004-35 | JACKING EQPT | 7 | |
| J57002-1 | Locating eqpt-wedge replacement，inbd/outbd le slat | 3 | |
| J57002-34 | Locating eqpt-wedge replacement，inbd/outbd le slat | 4 | |
| J57002-49 | Locating eqpt-wedge replacement，inbd/outbd le slat | 2 | |
| J57002-50 | Locating eqpt-wedge replacement，inbd/outbd le slat | 2 | |
| J57002-89 | LOCATING EQPT - WEDGE REPLACEMENT, INBD/OUTBD LE SLAT | 1 | |
| J599/20FJ61PN | Receptacle | 1 | |
| J599/26FJ61SN | Receptacle | 1 | |
| J72103 | 3/4" DRIVE IMPACT SOCKET 6 PT. 8 FT. (20 PCS) | 1 | |
| J78015-96 | ARM ATTACHMENT EQPT | 11 | |
| J78015-97 | ARM ATTACHMENT EQPT | 10 | |
| J78027-1 | Replacement eqpt-thrust reverser v-blade，RR trent 800 | 1 | |
| J78027-2 | Replacement eqpt-thrust reverser v-blade，RR trent 800 | 1 | |
| JACK ADAPTER DO328 NLG | JACK ADAPTER DO328 NLG | 1 | |
| JACK ADAPTOR (MAIN) | STRESS JACK ADAPTOR | 1 | |
| JACK ADAPTOR (NOSE) | STRESS JACK ADAPTOR | 1 | |
| JACK-ADAPTORS | JACK-ADAPTORS | 1 | |
| JACKADPTNW | NW JACK ADAPTOR | 1 | |
| JASB320737 | Jacking adaptors set box | 1 | |
| JD70050326 | JD70050326;JD700B series AC/DC Power Adapter_90W_18V | 1 | |
| JD72050522 | JD72050522;JD720C series AC/DC Adapter_60 W_15 V | 1 | |
| JHW2-4A | 3/8 DR IMPACT ADPTR3/8Fx1/2M | 1 | |
| JHW2-608 | 3/8 DR. IMPACT SKT 6-PT 1/4 | 1 | |
| JHW2-610 | 3/8 DR. IMPACT SKT 6-PT 5/16 | 1 | |
| JHW2-612 | 3/8 DR. IMPACT SKT 6-PT 3/8 | 1 | |
| JHW2-614 | 3/8 DR. IMPACT SKT 6-PT 7/16 | 1 | |
| JHW2-616 | 3/8 DR. IMPACT SKT 6-PT 1/2 | 1 | |
| JHW2-618 | 3/8 DR. IMPACT SKT 6-PT 9/16 | 1 | |
| JHW2-620 | 3/8 DR. IMPACT SKT 6-PT 5/8 | 1 | |
| JHW2-622 | 3/8 DR. IMPACT SKT 6-PT 11/1 | 1 | |
| JHW2-624 | 3/8 DR. IMPACT SKT 6-PT 3/4 | 1 | |
| JHW2-626 | 3/8 DR. IMPACT SKT 6-PT 13/1 | 1 | |
| JHW2-628 | 3/8 DR. IMPACT SKT 6-PT 7/8 | 1 | |
| JHW2-630 | 3/8 DR. IMPACT SKT 6-PT 15/1 | 1 | |
| JHW2-632 | 3/8 DR. IMPACT SKT 6-PT 1 | 1 | |
| JHW2M-607 | 3/8 DR IMPACT SKT 6-PT 7MM | 1 | |
| JHW2M-608 | 3/8 DR. IMPACT SKT 6-PT 8MM | 1 | |
| JHW2M-609 | 3/8 DR. IMPACT SKT 6-PT 9MM | 1 | |
| JHW2M-610 | 3/8 DR. IMPACT SKT 6-PT 10MM | 1 | |
| JHW2M-611 | 3/8 DR. IMPACT SKT 6-PT 11MM | 1 | |
| JHW2M-612 | 3/8 DR. IMPACT SKT 6-PT 12MM | 1 | |
| JHW2M-613 | 3/8 DR. IMPACT SKT 6-PT 13MM | 1 | |
| JHW2M-614 | 3/8 DR. IMPACT SKT 6-PT 14MM | 1 | |
| JHW2M-615 | 3/8 DR. IMPACT SKT 6-PT 15MM | 1 | |
| JHW2M-616 | 3/8 DR. IMPACT SKT 6-PT 16MM | 1 | |
| JHW2M-617 | 3/8 DR. IMPACT SKT 6-PT 17MM | 1 | |
| JHW2M-618 | 3/8 DR. IMPACT SKT 6-PT 18MM | 1 | |
| JHW2M-619 | 3/8 DR. IMPACT SKT 6-PT 19MM | 1 | |
| JHW36108 | 3/8 DR IMPACT SOCKET 6PT 1/4 | 1 | |
| JHW39006 | 1FX1-1/2M IMPACT ADAPTOR | 1 | |
| JHW4-6 | 1/2 DR IMPACT ADAPT 12F X 3/4 | 1 | |
| JHW4-612 | 1/2 DR. IMPACT SKT 6-PT 3/8 | 1 | |
| JHW4-614 | 1/2 DR. IMPACT SKT 6-PT 7/1 | 1 | |
| JHW4-616 | 1/2 DR. IMPACT SKT 6-PT 1/2 | 1 | |
| JHW4-618 | 1/2 DR. IMPACT SKT 6-PT 9/1 | 1 | |
| JHW4-620 | 1/2 DR. IMPACT SKT 6-PT 5/8 | 1 | |
| JHW4-622 | 1/2 DR. IMPACT SKT 6-PT 11/ | 1 | |
| JHW4-624 | 1/2 DR. IMPACT SKT 6-PT 3/4 | 1 | |
| JHW4-626 | 1/2 DR. IMPACT SKT 6-PT 13/ | 1 | |
| JHW4-628 | 1/2 DR. IMPACT SKT 6-PT 7/8 | 1 | |
| JHW4-630 | 1/2 DR. IMPACT SKT 6-PT 15/ | 1 | |
| JHW4-632 | 1/2 DR. IMPACT SKT 6-PT 1 | 1 | |
| JHW4-634 | 1/2 DR. IMPACT SKT 6-PT 1-1 | 1 | |
| JHW4-636 | 1/2 DR. IMPACT SKT 6-PT 1-1 | 1 | |
| JHW4-638 | 1/2 DR. IMPACT SKT 6-PT 1-3 | 1 | |
| JHW4-640 | 1/2 DR. IMPACT SKT 6-PT 1-1 | 1 | |
| JHW4-642 | 1/2 DR. IMPACT SKT 6-PT 1-5 | 1 | |
| JHW4-644 | 1/2 DR. IMPACT SKT 6-PT 1-3 | 1 | |
| JHW4-646 | 1/2 DR. IMPACT SKT 6-PT 1-7 | 1 | |
| JHW4-648 | 1/2 DR. IMPACT SKT 6-PT 1-1 | 1 | |
| JHW4M-620 | 1/2 DR . IMPACT SKT 6-PT 20M | 1 | |
| JHW4M-621 | 1/2 DR . IMPACT SKT 6-PT 21M | 1 | |
| JHW4M-622 | 1/2 DR . IMPACT SKT 6-PT 22M | 1 | |
| JHW4M-623 | 1/2 DR . IMPACT SKT 6-PT 23M | 1 | |
| JHW4M-624 | 1/2 DR . IMPACT SKT 6-PT 24M | 1 | |
| JHW4M-625 | 1/2 DR . IMPACT SKT 6-PT 25M | 1 | |
| JHW4M-626 | 1/2 DR . IMPACT SKT 6-PT 26M | 1 | |
| JHW4M-627 | 1/2 DR . IMPACT SKT 6-PT 27M | 1 | |
| JHW4M-629 | 1/2 DR . IMPACT SKT 6-PT 29M | 1 | |
| JHW4M-630 | 1/2 DR . IMPACT SKT 6-PT 30M | 1 | |
| JHW4M-632 | 1/2 DR . IMPACT SKT 6-PT 32M | 1 | |
| JHW4M-634 | 1/2 DR . IMPACT SKT 6-PT 34M | 1 | |
| JHW4M-636 | 1/2 DR . IMPACT SKT 6-PT 36M | 1 | |
| JHW50673 | 15PC 3/8DR 12PT COMPACT SET | 1 | |
| JHW6-618A | 3/4 DR IMPACT SKT 6PT 9/16 | 1 | |
| JHW6-620A | 3/4 DR IMPACT SKT 6PT 5/8 | 1 | |
| JHW6-622A | 3/4 DR IMPACT SKT 6PT 11/16 | 1 | |
| JHW6-624A | 3/4 DR IMPACT SKT 6PT 3/4 | 1 | |
| JHW6-626A | 3/4 DR IMPACT SKT 6PT 13/16 | 1 | |
| JHW6-630A | 3/4 DR IMPACT SKT 6PT 15/16 | 1 | |
| JHW6-632A | 3/4 DR IMPACT SKT 6PT 1 | 1 | |
| JHW6-634A | 3/4 DR IMPACT SKT 6PT 1-1/16 | 1 | |
| JHW6-636 | 3/4 DR. IMPACT SKT 6-PT 1-1/ | 1 | |
| JHW6-638 | 3/4 DR. IMPACT SKT 6-PT 1-3/ | 1 | |
| JHW6-640 | 3/4 DR. IMPACT SKT 6-PT 1-1/ | 1 | |
| JHW6-642 | 3/4 DR. IMPACT SKT 6-PT 1-5/ | 1 | |
| JHW6-644 | 3/4 DR. IMPACT SKT 6-PT 1-3/ | 1 | |
| JHW6-646 | 3/4 DR. IMPACT SKT 6-PT1-7/1 | 1 | |
| JHW6-648 | 3/4 DR. IMPACT SKT 6-PT1-1/2 | 1 | |
| JHW6-650 | 3/4 DR. IMPACT SKT 6-PT1-9/16 | 1 | |
| JHW6-654 | 3/4 DR. IMPACT SKT 6-PT1-11/ | 1 | |
| JHW6-656 | 3/4 DR. IMPACT SKT 6-PT 1-3/ | 1 | |
| JHW6-658 | 3/4 DR. IMPACT SKT 6-PT1-13/ | 1 | |
| JHW6-660 | 3/4 DR. IMPACT SKT 6-PT 1-7/ | 1 | |
| JHW6-662 | 3/4 DR. IMPACT SKT 6-PT1-15/ | 1 | |
| JHW6-664 | 3/4 DR. IMPACT SKT 6-PT 2 | 1 | |
| JHW6-666 | 3/4 DR. IMPACT SKT 6-PT 2-1 | 1 | |
| JHW6-670 | 3/4 DR IMPACT SKT 6PT 2-3/16 | 1 | |
| JHW6-672 | 3/4 DR IMPACT SKT 6PT 2-1/4 | 1 | |
| JHW6-676 | 3/4 DR. IMPACT SKT 6-PT 2-3 | 1 | |
| JHW6M-630 | 3/4 DR . IMPACT SKT 6-PT 30M | 1 | |
| JHW6M-632 | 3/4 DR . IMPACT SKT 6-PT 32M | 1 | |
| JHW6M-634 | 3/4 DR . IMPACT SKT 6-PT 34M | 1 | |
| JHW6M-635 | 3/4 DR . IMPACT SKT 6-PT 35M | 1 | |
| JHW6M-636 | 3/4 DR . IMPACT SKT 6-PT 36M | 1 | |
| JHW6M-638 | 3/4 DR . IMPACT SKT 6-PT 38M | 1 | |
| JHW6M-641 | 3/4 DR . IMPACT SKT 6-PT 41M | 1 | |
| JHW6M-646 | 3/4 DR . IMPACT SKT 6-PT 46M | 1 | |
| JHW7-6100 | 1 DR. IMPACT SKT 6-PT 3-1/8 | 1 | |
| JHW7-6104 | 1 DR. IMPACT SKT 6-PT 3-1/4 | 1 | |
| JHW7-6108 | 1IN IMPACT SKT 6PT 3-3/8 | 1 | |
| JHW7-624 | 1 DR IMPACT SKT 6-PT 3/4 | 1 | |
| JHW7-628 | 7-628 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-630 | 7-630 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-632 | 7-632 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-634 | 7-634 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-636 | 7-636 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-638 | 7-638 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-640 | 1IN DR IMPACT SOCKET 6PT 1-1/4 | 1 | |
| JHW7-642 | 7-642 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-644 | 7-644 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-646 | 7-646 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-648 | 7-648 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-650 | 7-650 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-652 | 7-652 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-654 | 7-654 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-656 | 7-656 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-658 | 7-658 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-660 | 7-660 1IN DR 6-PT IMPACT SOCKT | 1 | |
| JHW7-664 | 7-664 1IN DR 6PT IMPACT SOCKET | 1 | |
| JHW7-668 | 1 DR. IMPACT SKT 6-PT 2-1/8 | 1 | |
| JHW7-670 | 1 DR. IMPACT SKT 6-PT 2-3/16 | 1 | |
| JHW7-672 | 1 DR. IMPACT SKT 6-PT 2-1/4 | 1 | |
| JHW7-674 | 1 DR. IMPACT SKT 6-PT 2-5/16 | 1 | |
| JHW7-676 | 1 DR. IMPACT SKT 6-PT 2-3/8 | 1 | |
| JHW7-678 | 1 DR. IMPACT SKT 6-PT 2-7/16 | 1 | |
| JHW7-680 | 1 DR. IMPACT SKT 6-PT 2-1/2 | 1 | |
| JHW7-682 | 1 DR. IMPACT SKT 6-PT 2-9/16 | 1 | |
| JHW7-684 | 1 DR. IMPACT SKT 6-PT 2-5/8 | 1 | |
| JHW7-686 | 1 DR. IMPACT SKT 6-PT 2-11/1 | 1 | |
| JHW7-688 | 1 DR. IMPACT SKT 6-PT 2-3/4 | 1 | |
| JHW7-690 | 1 DR. IMPACT SKT 6-PT 2-13/1 | 1 | |
| JHW7-692 | 1 DR. IMPACT SKT 6-PT 2-7/8 | 1 | |
| JHW7-694 | 1 DR. IMPACT SKT 6-PT 2-15/1 | 1 | |
| JHW7-696 | 1 DR. IMPACT SKT 6-PT 3 | 3 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| JP100SSCSP | TUG: ELECTRIC,100K LB CAPACITY, SOFTCAPTURE, | 1 | |
| JPAD01 | JACK ADAPTOR | 1 | |
| JSB24S | Replacement Blades for Jet Air Body Saw (5 Pack) (Description: Replacement Blades (5 pack)) (Add to cart: Add To Cart) | 1 | |
| JSM-213 | Economy Pneumatic Nibbler (Capacity (steel): -) (Overall length: -) (Description: Replacement Punch) (Add to cart: Add To Cart) (Capacity (steel): -) (Overall length: -) (Description: Replacement Die) (Add to cart: Add To Cart) (Capacity (steel): 18 Gauge | 1 | |
| JST-30 | HELICOPTER TOWING TRACTOR | 1 | |
| JT8D720652K9M1 (270252) | Acc. Brg. Radial Clearance Adapter | 1 | |
| JT8D720952K8M1 (270252) | Acc. Brg. Radial Clearance Adapter | 1 | |
| K-1358 | Kit, Adaptor Cpu (Factory) | 1 | |
| K-2179 | KIT, AXLE JACK ADAPTER | 1 | |
| K-2728 | Nose Gear Axle Jack Adapter | 1 | |
| K-2730 | MAIN GEAR AXLE JACK ADAPTER (02-7833-0110) | 1 | |
| K-2730 (02-7833-0110) | Main Gear Axle Jack Adapter (02-7833-0110) | 1 | |
| K-3582 | Tronair K-3582 Pilatus PC-12U-28A Main & Nose Gear Tripod Jack Pad Adaptor | 4 | |
| K-3583 | Tronair K-3583 Pilatus PC-6 Main & Nose Gear Tripod Jack Pad Adaptor | 1 | |
| K-3692 | Tronair K-3692 Raytheon Premier Nose Gear Tripod Jack Pad Adaptor | 2 | |
| K-4057 | ADAPTER, NLG BRACE | 1 | |
| K-4229 | KIT, NOSE ADAPTER ASS'Y - INCLUDED WITH 02-7818C0110 AXLE JACK | 4 | |
| K-4617 | ACMP 2 REMOVAL & INSTALL TOOL ADAPTOR | 1 | |
| K.230B | FACOM K.230B 3/4″ FEMALE TO 1/2″ MALE DRIVE SOCKET ADAPTOR / COUPLER | 2 | |
| K07001-14 | Emergency Jacking Eqpt - MLG | 3 | |
| K07001-18 | Emergency Jacking Eqpt - MLG | 7 | |
| K07002-17 | Emergency Jacking Eqpt - NLG | 4 | |
| K07003-1 | Jack Ftg-Fwd Apt | 1 | |
| K07003-15 | JACK ADAPTER B787 | 7 | |
| K07004 | JACK FITTING EQPT -0 INNER WING | 1 | |
| K07004-1 | Jack Fitting Eqpt - Inner Wing | 9 | |
| K07005 | JACK FITTING EQPT -0 OUTER WING | 1 | |
| K07005-1 | Jack Fitting Eqpt - Outer Wing | 10 | |
| K13-0074/9SF5285 | ELEVATOR ACTUATOR HOIST ADAPTER | 1 | |
| K20006-1 | Personnel Eqpt - Retractable Lanyard, MLG and NLG | 1 | |
| K20007-1 | Personnel Eqpt - Retractable Lanyard, Engine Pylo | 1 | |
| K21004 | Adapter Equipment - Heat Exchanger Cluster Removal and Installation Equipment (AC Pack) | 1 | |
| K21004-1 | Jack Adapter - Heat Exchanger, AC Pack | 1 | |
| K21004-40 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 4 | |
| K21004-72 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 8 | |
| K21004-79 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 2 | |
| K21004-85 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 6 | |
| K21004-94 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 1 | |
| K21006 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-1 | JACK ADAPTOR | 1 | |
| K21006-11 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-12 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-13 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-26 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-27 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-36 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-40 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-41 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-46 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 2 | |
| K21006-47 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-48 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-49 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-5 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-51 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-52 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
| K21006-53 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 10 | |
| K21006-53 | JACK ADAPTER-AIR COMPRESSOR,ACPACK | 10 | |
| K21006-74 | JACK ADAPTER-AIR COMPRESSOR，AC PACK | 2 | |
| K21008 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE, AIR CONDITIONING PACK (CE) | 9 | |
| K21008-1 | JACK ADAPTER-AIR CYCLE MACHINE,ACPACK | 9 | |
| K21008-10 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-13 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-16 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-17 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 2 | |
| K21008-2 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-24 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-25 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-26 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-27 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-3 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-4 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-6 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-7 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-8 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K21008-9 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 1 | |
| K210081 | JACK ADAPTOR - AIR CYCLE MACHINE | 9 | |
| K21009-1 | Jack Adapter - Lower Recirculation Fan, AC Pack | 1 | |
| K21010-1 | JACK ADAPTOR | 1 | |
| K21010-45 | RAM AIR FAN, AIR CONDITIONING PACK - JACK ADAPTER (CE) | 4 | |
| K21010-54 | RAM AIR FAN, AIR CONDITIONING PACK - JACK ADAPTER | 5 | |
| K21011 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-1 | Jack Adapter - Adjustable, AC Pack Components | 1 | |
| K21011-11 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-15 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-20 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-21 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-22 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-23 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-26 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-28 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 2 | |
| K21011-32 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-4 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-42 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-5 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-50 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-51 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-52 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-55 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-56 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-57 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-58 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-59 | ADAPTER EQPT ADJUSTABLE JACK | 1 | |
| K21011-6 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-60 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-61 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-62 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, JACK (CE) | 9 | |
| K21011-62 | ADAPTER EQPT-ADJUSTABLE ANGLE,JACK | 9 | |
| K21011-63 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 2 | |
| K21011-65 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011PLD | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21013-36 | Rmvl/Instl Eqpt - FWD Cargo AC FCAC Pump | 7 | |
| K21014 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-1 | JACK ADAPTER - CONDENSER, AIR CONDITIONING PACK, REMOVAL AND INSTALLATION (CE) | 7 | |
| K21014-1 | JACK ADAPTER-CONDENSER AC PACK,R&I | 7 | |
| K21014-2 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-22 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-23 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-24 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-25 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-26 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-29 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-30 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-31 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-32 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-33 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-34 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-35 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-37 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-38 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-39 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-4 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-5 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-6 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-7 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21014-9 | JACK ADAPTER-CONDENSER,AC PACK, R&I | 1 | |
| K21029-1 | ADAPTER - JACK, SECONDARY HEAT EXCHANGER | 4 | |
| K21029-19 | Adapter-jack，secondary heat exchanger | 4 | |
| K21030-1 | PAC adapter-ram air inlet | 2 | |
| K2179 | KIT: ADAPTER,AXLE JACK, | 1 | |
| K24001-1 | VFSG/ASG JACK ADAPTER | 10 | |
| K24014-1 | ADAPTER CABLE - BATTERY GSE MAIN/APU BATTERY ENCLOSURETEST SET - AUTO THROTTLE SWITCHPACK | 5 | |
| K26003-65 | TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM (TRENT 1000 PACKAGE C1 ENGINES) | 2 | |
| K26003-78 | TEST EQPT - ENGINE FIRE EXTINGUISHING SYSTEM (TRENT 1000 PACKAGE C1 ENGINES) | 6 | |
| K27002 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR | 1 | |
| K27002-1 | Adapter - TE Flap Geared Rotary Actuator, Removal | 1 | |
| K27002-83 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 1 | |
| K27002-83 upgrade to K27002-85 | Adapter eqpt-te geared rotary actuator，removal/installation | 1 | |
| K27002-85 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 9 | |
| K27002-97 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL / INSTALLATION | 1 | |
| K27006 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-1 | Rem Install Eqpt - Spoiler Electric Motor Actuator | 7 | |
| K27006-11 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-12 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-2 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-3 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-7 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27006-9 | REMOVAL/INSTALLATION EQPT-SPOILER ELECTRIC MOTOR ACTUATOR | 1 | |
| K27007 | DRIVE ADAPTER EQUIPMENT - ACTUATOR HORIZONTAL STAB | 1 | |
| K27007-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 9 | |
| K27007-1-A | Drive adapter-actuator，horizontal stabilizer trim | 1 | |
| K27007-2 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-4 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-5 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-6 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27007-7 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | 1 | |
| K27011 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-10 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-11 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-13 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-16 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-2 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-20 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-21 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-28 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-3 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-31 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-32 | Dispatch Eqpt - Hydralic Spoiler Actuators | 11 | |
| K27011-33 | Dispatch Eqpt - Hydralic Spoiler Actuators | 12 | |
| K27011-33 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 12 | |
| K27011-4 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-47 | DISPATCH EQPT - INBD HYDRAULIC SPOILER ACTUATORS | 11 | |
| K27011-5 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-6 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-7 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-8 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27011-9 | DISPATCH EQPT-HYDRAULIC SPOILER ACTUATORS | 1 | |
| K27021 | REMOVAL/IINSTALLATION EQPT-HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| K27021-1 | Hoist Eqpt - Horizontal Stabilizer Trim Actuator | 7 | |
| K27048-1 | EQUIPT HORIZ STABILEZER TRIM ACTUAT | 10 | |
| K27059-1 | Dispatch Eqpt - Spoiler Electro Mech Actuator | 7 | |
| K27059-12 | Dispatch Eqpt - Spoiler Electro Mech Actuator | 1 | |
| K27059-18 | Dispatch Eqpt - Spoiler Electro Mech Actuator | 11 | |
| K27059-1 | DISPATCH EQPT - SPOILER ELECTRO MECHANICAL ACTUATOR | 7 | |
| K27061 | Lock-out Eqpt, Spoiler Electro Mechnical Actuator | 1 | |
| K27061-1 | Lock Out Eqpt - Spoiler Electro Mech Actuator | 10 | |
| K27061-1 | LOCK-OUT EQPT-SPOILERELECTRO MECHANICAL ACTUATOR | 10 | |
| K27069-1 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 7 | |
| K2799 | PAD: ADAPTER,JACK, | 4 | |
| K29005-1 | DISPTACH PLUG - JUMPER , RAM AIR TURBINE (RAT) DEPLOY SWITCH | 6 | |
| K31001-1 | TEST SET - P40 RECEPTACLE TO HEADSET JACK | 11 | |
| K32001-1 | Sling Eqpt - Retract Actuator, MLG | 11 | |
| K32006 | HOIST ADAPTER EQPT -0 NLG DRAG BRACE RMVL/INSTL | 1 | |
| K32006-1 | HOIST ADAPTER EQUIPMENT - NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION (CE) | 7 | |
| K32007-1 | Spring R/I Eqpt - Drag Brace MLG | 7 | |
| K32008-1 | SPRING RMVL/INSTL EQPT -0 DRAG BRACE, MLG | 1 | |
| K32009-1 | Puller eqpt-trunnion pin，NLG assy & NLG upper drag brace | 5 | |
| K32009-25 | Puller eqpt-trunnion pin，NLG assy & NLG upper drag brace | 7 | |
| K32011 | REPLACEMENT EQPT -0 LOWER BEARING SEALS, MLG | 1 | |
| K32011-1 | REPLACEMENT EQPT. | 2 | |
| K32011-10 | REPLACEMENT EQPT | 1 | |
| K32011-11 | REPLACEMENT EQPT | 2 | |
| K32011-13 | REPLACEMENT EQPT | 1 | |
| K32011-14 | REPLACEMENT EQPT | 1 | |
| K32011-15 | REPLACEMENT EQPT | 1 | |
| K32011-16 | REPLACEMENT EQPT | 1 | |
| K32011-17 | REPLACEMENT EQPT | 1 | |
| K32011-18 | REPLACEMENT EQPT | 1 | |
| K32011-19 | REPLACEMENT EQPT | 1 | |
| K32011-2 | REPLACEMENT EQPT | 4 | |
| K32011-21 | REPLACEMENT EQPT | 1 | |
| K32011-22 | REPLACEMENT EQPT | 1 | |
| K32011-23 | REPLACEMENT EQPT | 1 | |
| K32011-24 | REPLACEMENT EQPT | 1 | |
| K32011-25 | REPLACEMENT EQPT | 1 | |
| K32011-26 | REPLACEMENT EQPT | 1 | |
| K32011-27 | REPLACEMENT EQPT | 1 | |
| K32011-28 | REPLACEMENT EQPT | 1 | |
| K32011-29 | REPLACEMENT EQPT | 1 | |
| K32011-3 | REPLACEMENT EQPT | 1 | |
| K32011-32 | REPLACEMENT EQPT | 1 | |
| K32011-35 | REPLACEMENT EQPT | 1 | |
| K32011-36 | REPLACEMENT EQPT | 1 | |
| K32011-37 | REPLACEMENT EQPT | 1 | |
| K32011-39 | REPLACEMENT EQPT | 1 | |
| K32011-4 | REPLACEMENT EQPT | 1 | |
| K32011-41 | REPLACEMENT EQPT | 1 | |
| K32011-46 | REPLACEMENT EQPT | 1 | |
| K32011-47 | REPLACEMENT EQPT | 2 | |
| K32011-5 | REPLACEMENT EQPT | 1 | |
| K32011-54 | REPLACEMENT EQPT | 1 | |
| K32011-55 | REPLACEMENT EQPT | 1 | |
| K32011-56 | Replacement Eqpt - MLG Lower Bearing Seals | 1 | |
| K32011-6 | REPLACEMENT EQPT | 1 | |
| K32011-63 | Replacement eqpt-lower bearing seals，MLG | 3 | |
| K32011-64 | Replacement eqpt-lower bearing seals，MLG | 2 | |
| K32011-7 | REPLACEMENT EQPT | 1 | |
| K32011-8 | REPLACEMENT EQPT | 1 | |
| K32011-9 | REPLACEMENT EQPT | 1 | |
| K32011-90 | Replacement eqpt-lower bearing seals，MLG | 4 | |
| K32011-91 | Replacement eqpt-lower bearing seals，MLG | 6 | |
| K32013 | RMVL/INSTL EQPT -0 RETRACT ACTUATOR, NLG | 1 | |
| K32013-1 | Rmvl/Instl Eqpt - Retract Actuator, NLG | 1 | |
| K32013-24 | Rmvl/Instl Eqpt - Retract Actuator, NLG | 6 | |
| K32015 | REPLACEMENT EQPT -0 LOWER SEALS, NLG | 1 | |
| K32015-1 | Replacement Eqpt - Lower Seals NLG | 4 | |
| K32015-10 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-12 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-13 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-14 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-15 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-19 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-2 | REPLACEMENT EQPT-LOWER SEALS,NLG | 3 | |
| K32015-21 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-23 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-26 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-27 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-29 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-3 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-30 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-32 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-35 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-36 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-37 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-38 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-4 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-43 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-46 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-5 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-50 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-6 | REPLACEMENT EQPT-LOWER SEALS,NLG | 4 | |
| K32015-7 | REPLACEMENT EQPT-LOWER SEALS,NLG | 3 | |
| K32015-8 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32015-9 | REPLACEMENT EQPT-LOWER SEALS,NLG | 1 | |
| K32018-35 | SIDE BRACE ADJUSTMENT EQPT | 1 | |
| K32018-42 | Side Brace Adjustment Eqpt - Drag Brace Lock Link | 1 | |
| K32018-59 | SIDE BRACE ADJUSTMENT EQPT - DRAG BRACE LOCK LINK ASSY, MLG | 3 | |
| K32019-64 | Sling Eqpt- Drag and Side Brace Rmvl/Instl | 3 | |
| K32019-91 | SLING EQPT - DRAG & SIDE BRACE | 6 | |
| K32021-11 | Receptacle Box Mounting | 1 | |
| K32021-4 | Cover Receptacle | 2 | |
| K32025-1 | Rmvl/Instl Eqpt-Retract Actuator, MLG Door | 6 | |
| K32034-1 | TORQUE ADAPTER - ELECTRICAL BRAKE ACTUATOR CONNECTOR, MAIN LANDING GEAR | 9 | |
| K32040-1 | Sling Eqpt - Drag and Side Brace Rmvl Instl MLG | 3 | |
| K32040-73 | Sling eqpt-drag and side brace rmvl/instl，MLG | 1 | |
| K32040-81 | Sling eqpt-drag and side brace rmvl/instl,mlg | 9 | |
| K32040-89 | Sling eqpt-drag and side brace rmvl/instl，MLG | 4 | |
| K32046-1 | Sling eqpt-slg actuator | 3 | |
| K3314 | ADAPTERS, JACK PAD | 3 | |
| K3579 | PAD: ADAPTER,JACK, | 2 | |
| K3582 | ADAPTOR, MAIN WHEEL JACK | 4 | |
| K38001-1 | Removal/Installation Eqpt - Vacuum Waste Tanks | 8 | |
| K4191 | ADAPTER: JACK,NOSE,LEAR 45 | 2 | |
| K51001-1 | Static Balance Eqpt - Flight Control Surfaces | 1 | |
| K51001-56 | Static Balance Eqpt. - Flight Control Surfaces | 1 | |
| K51001-62 | Static Balance Eqpt. - Flight Control Surfaces | 1 | |
| K53001-1 | Platform Eqpt - Pressure Bulkhead Access | 4 | |
| K53001-151 | Platform eqpt-pressure bulkhead access | 3 | |
| K53003-24 | LADDER EQPT VERTICAL FIN N EMPENNAGE ACCESS | 1 | |
| K53003-34 | EQPT LADDER VERTICAL EMPENNAGE ACCESS | 6 | |
| K53003-35 | Ladder Eqpt - Empennage Access, Vertical Fin | 1 | |
| K53003-38 | LADDER EQPT - EMPENNAGE ACCES, VERTICAL FIN | 3 | |
| K53003-51 | LADDER EQPT - EMPENNAGE ACCES, VERTICAL FIN | 9 | |
| K53004-1 | Access ladder eqpt-horizontal stabilizer | 1 | |
| K53004-137 | Access ladder eqpt-horizontal stabilizer | 2 | |
| K53004-54 | Access Ladder Eqpt - Horizontal Stabilizer | 4 | |
| K55001-1 | Jacking Eqpt Horizontal Stab | 7 | |
| K55001-55 | JACKING EQPT | 6 | |
| K55006 | REACTION FIXTURE EQPT-TORQUE TOOL | 1 | |
| K55006-1 | Reaction Fixture Eqpt-Torque Tool | 1 | |
| K55006-125 | Reaction Fixture Eqpt - Torque Tool | 8 | |
| K55006-73 | Reaction Fixture Eqpt - Torque Tool | 9 | |
| K55006-74 | Reaction fixture eqpt-torque tool | 4 | |
| K55006-75 | Reaction Fixture Eqpt - Torque Tool | 9 | |
| KAD16X10BK | 10 COMPT ORG TRAY 16X10 BLACK | 1 | |
| KAS42-5E | ABSOLUTE PROBE, REFLECTION TYPE WITH FERRITE CORE, SHIELDED, 500HZ-250KHZ, 4S-FISCHER RECEPTACLE; 25 | 3 | |
| KAV 15-45 | VACUUM CLEAN HEPA FILTER FOR CARBON DUST KERSTAR (HW300 TORQUE ADAPTER AND HEAD) | 1 | |
| KB132L 1204-000 | ADAPTOR MAIN U/C JACKING | 1 | |
| KB132L1204-000 | ADAPTOR MAIN U/C JACKING | 1 | |
| KC46 BORESCOPE KIT | EACH KIT SHALL CONSISTS OF THE FOLLOWING: 1. ONE (1) 3D VIDEOSCOPE BASE UNIT WITH BATTERIES (2) & CHARGER (SHALL INCLUDE: CASE AND MOUNT KIT, SHOULDER STRAP, MEMORY CARD, CARD READER, SCOPE HOLDER, AC ADAPTER, & WARRANTY) 2. ONE (1) MEASUREMENT VIDEOSCOP | 1 | |
| KETN602C4PUU | 2BK 60IN BLACK/TTNM LEDSSTPT | 1 | |
| KETN602C8PUU | 2BK 60IN BLACK TTNM LEDBLTPT | 1 | |
| KETN682C4PUU | 2BK 68IN BLACK/TTNM LEDSSTPT | 1 | |
| KETN682C8PLS | 2BK 68IN BLACK/BLUE LEDBLTPT | 1 | |
| KETN682C8PUU | 2BK 68IN BLACK TTNM LEDBLTPT | 1 | |
| KETN843C4PUU | 3BK 84IN BLACK/TTNM LEDSSTPT | 1 | |
| KETN843C8PUU | 3BK 84IN BLACK TTNM LEDBLTPT | 1 | |
| KIT FBP-787-CCR | INTERFACE TIP - FIBER OPTIC, INSPECTION PROBE | 1 | |
| KR10KPC | BLACK SIDE EMPTY BOX | 1 | |
| KW0600811 | SKIN ACT 5 DIOPTER MAGNIFIER LAMP WITH STAND, ECONO MAGLAMP | 1 | |
| L131M0001101 | JACKING ADAPTER | 1 | |
| L131M0003101 | JACKING ADAPTERS | 1 | |
| L25002-1 | Lockpin Check Eqpt - Crew Seat Track | 1 | |
| L27001-1 | Check eqpt-jackscrew，horizontal stabilizer | 7 | |
| L27001-6 | 1" Contact PT Extention | 1 | |
| L27001-7 | 2" contact pt extension | 1 | |
| L27001-8 | 3" contact pt extension | 2 | |
| L38602G01 | FIG 55 -35, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38602G02 | FIG 55 - 36, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38602G03 | FIG 55 - 37, NOZZLE, LPT STATOR- STG 2 MACHINING | 1 | |
| L38603G01 | FIG 55 - 58, NOZZLE, LPT STATOR-STG 3 MACHINING OMITTED AT 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L38603G02 | FIG 55 - 59, NOZZLE, LPT STATOR-STG 3 MACHINING AT SPLITLINE - 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L38603G03 | FIG 55 - 60, NOZZLE, LPT STATOR-STG 3 MACHINING AT SPLITLINE - 3 AND 9 O'CLOCK POSITIONS | 1 | |
| L44627P05L44627P06 | SPLINED ADAPTER CONDITION-NEW/OHC MANUFACTURER GE | 1 | |
| L50528P01 | FIG 54 - 1, BLADE, LPTR STAGE 1 MACHINING | 1 | |
| L620M1810051 | OPT BLADE TRACKER | 1 | |
| LB20004-42 | ADAPTER - ACCESS PANEL, LEVERAGE | 1 | |
| LC 1.5 LC 0.0 | Jack adaptor kit for Aircraft Weighing | 1 | |
| LLA533A016 | BACKLASH CHECKING ADAPT | 1 | |
| LLA547A155 | BACKLASH CHECKING ADAPTOR | 1 | |
| LLA788A004 | BACKLASH CHECKING ADAPTOR | 1 | |
| LLA795A034 | BACKLASH EQUPT. | 1 | |
| LLA797A036 | GEAR BACKLASH ADAPTOR | 1 | |
| LOAD CELL JACK ADP N | LOAD CELL JACK ADAPTOR (NOSE) | 1 | |
| LOAD CELL JACK APT M | LOAD CELL JACK ADAPTOR (MAIN) | 1 | |
| LPA200SSX30 | LPA2-TRAVEL CASE ACCESSORIES AIRBUS ADAPTER | 1 | |
| LPA20PSTA30 | LPA2-TRAVEL CASE ACCESSORIES AIRBUS ADAPTER | 2 | |
| LPTACC01 | Engine LPTACC Brackets REM/INS | 1 | |
| LST50316 | SCRIBER, MACHINIST’S, 3 PT | 1 | |
| LST50697 | 0-100W/3CONTACTPOINTSADAPTERW/ | 1 | |
| LST50699 | 0-100W/3CONTACTPOINTS&ADAPTOR | 1 | |
| LST52534 | PROTRACTOR&DEPTHGAGE0-180DEG6" | 1 | |
| LTCT28619-01 | Optical Tachometer | 1 | |
| LTCT7285 | ADAPTER MECHANICAL PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| M.230C1 | FACOM 3/4 Male Square Drive, For 1' Adaptor | 1 | |
| M0DEL 111B | 0XYGEN ANALYZER, P0RTABLE, BATTERY 0PERATED, ACCEPTABLE F0R USE IN CLASS I, DIVISI0N II AREAS. INCLUDES H0SE/FITTING T0 MATE WITH B0EING AIRPLANE NITR0GEN GENERATI0N SYSTEM 0XYGEN TEST PORT | 1 | |
| M12ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) | 1 | |
| M14A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| M14ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| M15360 | Extractor, Oil Inlet Adapter | 1 | |
| M15370 | Extractor, Oil Outlet Adapter | 1 | |
| M47039 | ADAPTER - ACTR CYLINDER NLG A320NEO | 3 | |
| M54TC0040000 | Receptacle ABS0892-2 I/R Tool | 1 | |
| M6-TF | Female Triax Receptacle to Microdot 6 feet long | 1 | |
| M65724238 | PNEUMATIC SUPPLY INTERFACE (NP) OPT TO M82000228 | 1 | |
| M65725379 | SPECIAL TOOL - ACM COMPRESSOR ADAPTER | 2 | |
| M83723-60-110AC | COVER CONNECT RECEPTACLE | 4 | |
| M83723-60-110AN | COVER RECEPTACLE | 19 | |
| M83723-60-112AC | COVER CONNECT RECEPTACLE | 4 | |
| M83723-60-114AC | RECEPTAC | 7 | |
| M83723-60-18AN | COVER RECEPTACLE | 16 | |
| M83723/60-108 | SQUIB - PROTECTIVE CAP (FOR THREADED RECEPTACLES SIZE 08) | 1 | |
| M83723/60-110 | SQUIB - PROTECTIVE CAP (FOR THREADED RECEPTACLE SIZE 10) STD-7457 | 1 | |
| M83723/60-110AN | PROTECTIVE COVERS， RECEPTACLES，CONNECTORS ELECTRICAL | 19 | |
| M83723/60-118AC | RECEPTACLE COVER | 1 | |
| M83723/60-120AC | RECEPTACLE COVER | 1 | |
| M83723/60-210 | SQUIB - PROTECTIVE CAP (FOR BAYONET RECEPTACLE SIZE 10) STD-7460 | 1 | |
| M83723/60-210AN | SQUIB - PROTECTIVE CAP M83723/60-210AN (FOR BAYONET RECEPTACLE SIZE 10) | 8 | |
| M83723/60-28 | SQUIB - PROTECTIVE CAP (FOR BAYONET RECEPTACLES SIZE 8) STD-7461 | 1 | |
| M83723/60-28AN | SQUIB - PROTECTIVE CAP M83723/60-28AN (FOR BAYONET RECEPTACLES SIZE 8) | 10 | |
| MA-15135-2-6000 | JACK ADAPTER | 1 | |
| MA02-00-00 | MLG JACK ADAPTER ATR42/72 | 1 | |
| MA18 | MANCHON ACIER FIPT 1/8X1/ | 1 | |
| MA280009-1 | ADAPTER EQUIPMENT - AERIAL REFUELING RECEPTACLE | 1 | |
| MA280010-1 | R/I EQUIPMENT, AR RECEPTACLE CRANJK ARM SPRING | 1 | |
| MA280021-29 | ADAPTER EQPT - BODY FUEL TANK HUMAN ACCESS HATCH | 1 | |
| MA520003-1 | RIGGING EQUIPMENT, RECEPTACLE DOOR TORQUE TUBE | 1 | |
| MAE-T92210 | A300/A310 JACK ADAPTERS (10 PCS.) | 1 | |
| MAE-T92219 | A300/A310 JACK ADAPTER SET | 1 | |
| MAE-T92238 | A300/A310 JACK ADAPTER SET | 1 | |
| MAP-PACK-A2SLS | MAP-PACK-A2SLS;mSWS-A2SLS Empty Shipping box | 1 | |
| MAP-PACK-DUAL-MOD | MAP-PACK-DUAL-MOD;MAP-Series Dual Slot Module Empty Box | 1 | |
| MAP-PACK-MAP230 | MAP-PACK-MAP230;MAP-230 Mainframe Empty Shipping box | 1 | |
| MAP-PACK-MAP280 | MAP-PACK-MAP280;MAP-280 Mainframe Empty Shipping box | 1 | |
| MAP-PACK-MAP330 | MAP-PACK-MAP330;MAP-330 Rackmount Mainframe Empty Shipping box - Convertible to benchtop | 1 | |
| MAP-PACK-MAP380 | MAP-PACK-MAP380;MAP-380 Rackmount Mainframe Empty Shipping box - Convertible to benchtop | 1 | |
| MAP-PACK-SINGLE-MOD | MAP-PACK-SINGLE-MOD;MAP-Series Single Slot Module Empty Box | 1 | |
| MB1 | ADAPTER PITOT STATIC/VACUUM CUP | 1 | |
| MBEU58363 | ADAPTER-GAS SHACKLE | 1 | |
| MC-4A | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC-4B | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC12A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC12ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC14A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 2 | |
| MC14ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC280006-158 | VACUUM ADAPTER - FUEL VAPOR PURGE SYSTEM | 1 | |
| MC280007-1 | HANDLING EQPT - REMOVAL/INSTL, SECT 46 ACCESS PANEL | 1 | |
| MC280007-59 | HANDLING EQPT - REMOVAL/INSTL, SECT 46 ACCESS PANEL | 1 | |
| MC280008-1 | TEST EQPT - ELECTRIC MOTOR VALVE ACTUATION | 1 | |
| MC950001-36 | JACK ADAPTER-ESM RADAR R/I | 1 | |
| ME65B40000-1 | JACK-MECHANICAL EQPT | 9 | |
| ME9026-0300 | ACTUATOR DRIVE SHAFT ADAPTER | 1 | |
| ME9026-0500 | ADAPTER ACTUATOR SUPPORT | 1 | |
| MFR-C | HOIST,LEVER,3/4 TON,MFR#C&M,MOD#640 5 EACH HOIST,LEVER,3/4 TON,MODEL 640,MFR-C&M NOTE: SHOULD MEET U.S.BRITISH STANDARD, OTHER THAN THIS SHOULD NOT BE ACCEPTED. "TUGIT" U.S.A. BEEN ACCEPTED | 1 | |
| MIT012N8041-1H | MISC. TOOL ROLLS ROYCE LH BACKUP SUPT FITTING TOOL KIT | 1 | |
| MIT204-13231T1 | EXTRACTION EQPT | 1 | |
| MIT65-17659 | LLAVE ADAPTADOR RETRACCIÓN TREN PRINCIPAL | 3 | |
| MIT65-21816 | ADAPTADOR TORQUE INSTALACIÓN UNIDAD POTENCIA | 1 | |
| MIT65B00115-1 | ADAPTER - PROTRACTOR, SPEED BRAKE | 2 | |
| MIT65B00772 | MISCELLANEOUS TOOL - FUEL SAMPLING RECEPTACLE ASSEMBLY | 7 | |
| MIT65B01218 | TORQUE ADAPTER - DRAG BRACE ASSEMBLY, WING LANDING GEAR | 6 | |
| MIT65B01500 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
| MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B60127 | MISC.TOOL -EQPT,INSTL,RETRACTIVE WHEEL DRIVE LWR CARGO COMPT. | 1 | |
| MIT65B80326-6 | ADAPTER - PROTRACTOR, CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 1 | |
| MIT65B80985-9 | ADAPTER - PROTRACTOR, THRUST LEVER | 8 | |
| MIT65B81875 | SCREWDRIVER - ADAPTER, RUDDER, ELEVATOR FEEL ACTUATOR | 1 | |
| MIT65B82568 | ADAPTER - PRESSURE RELIEF VALVE, RETRACT ACTUATOR, WING LANDING GEAR | 3 | |
| MIT65B90315 | TQ ADAPTOR ACCESS DOOR LATCHES | 3 | |
| MIT65B92408-1 | MONTAJE DE ALINEACIÓN ÁRBOL ADAPTADOR | 9 | |
| MIT69B81601-1 | ADAPTER - PROTRACTOR, THRUST REVERSER | 6 | |
| MIT69B82662 | SOCKET ADAPTER SET - SPOILER ACTUATOR BOLT | 4 | |
| MIT69B82662-17 | SET - SOCKET ADAPTER, SPOILER ACTUATOR BOLT, USED ON INBD SPOILERS 5 THRU 8 | 1 | |
| MIT69B82662-18 | SOCKET ADAPTOR SET-SPOILER ACTUATOR BO | 2 | |
| MLD-PG-150 | PRESSURE GAUGE 150PSI 3/8 NPT BACK CONNECTION | 1 | |
| MODE ZYAIR G-220 | WIRELESS USB, DUAL MODE ADAPTER/ACCESS POINT, 54MBPS | 1 | |
| MODEL 111B | OXYGEN ANALYZER, PORTABLE, BATTERY OPERATED, ACCEPTABLE FOR USE IN CLASS I, DIVISION II AREAS. INCLUDES HOSE/FITTING TO MATE WITH BOEING AIRPLANE NITROGEN GENERATION SYSTEM OXYGEN TEST PORT. | 1 | |
| MODEL 2030 | RF SIGNAL GENERATOR (RF OUTPUT VARIABLE FROM 116 MHZ TO 150 MHZ, RF OUTPUT VARIABLE FROM 0.5 ΜV TO 0.2 VOLTS ACROSS 50-OHM LOAD, GPIB ADDRESS:20) (WITH OPTIONS 1 AND 6) | 1 | |
| MODEL 801600 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | 1 | |
| MODEL 80I-600 | AMP-CLAMP ADAPTER, AC CURRENT | 1 | |
| MODEL 8400K | MICROMETER, OPTICAL, 200 POWER, DEPTHS TO .295 INCH, THICKNESS TO .440 INCH, ACCURACY /-.0002 INCH | 1 | |
| MODEL 966A1 | MICROMETER - OPTICAL, (UNIVERSAL KIT) 200 POWER, DEPTHS TO .295", THICKNESS TO .440", ACCURACY /-.0002", ALL ACCESSORIE (MONOCLE INDUSTRIES INC.) | 4 | |
| MODEL Y8100 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | 1 | |
| MODEL966 | ACE OPTICAL MICROMETER | 3 | |
| MP9095-95FX | Surface Probe, .95 drop x 9.5" length, Microdot - ENGRAVE: P/N, SPTech, 50-500KHz | 1 | |
| MPS43B-B9 | DMA-AERO MPS43B-B9 AIR DATA TEST SET WITH WIFI OPTION OPTIONS K11 VACUUM, B8 BLUETOOTH, AND B9 WIFI | 1 | |
| MQ4-120 | RADAR COOLING INLET PLUG (MQ4-AARSS) ADAPTER, JACK PAD, NSN: 1560-01-659-4947 | 1 | |
| MRF 96-50 | MICROMETER, OPTICAL (MIN DEPTH .02 INCH AND ACCURACY +/-.0005 INCH) | 1 | |
| MS 21296-05025 | BOLTS LEARJET 40/45 JACKPAD ADAPTERS | 1 | |
| MS-T16 | RECEPTACLE DRILL JIG | 1 | |
| MS17986-412 | AC ADAPTOR, LAPTOP (PROGRAM LOADER VERIFIER) | 1 | |
| MS21902D10 | ADAPTER, HOSE TO ENCLOSURE(AS21902D10, SAE: SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE STANDARD) | 1 | |
| MS21914-5D | CAP RECEPTACLE | 2 | |
| MS24264R18B31SN | RECEPTACLE | 1 | |
| MS24264R22B19SN | RECEPTACLE | 1 | |
| MS3120E16-8S | CONNECTOR,RECEPTACLE | 1 | |
| MSWS-A2DM-AC918 | MSWS-A2DM-AC918;mSWS Quad Detector Module with 4 LC power meter adapters | 1 | |
| MTS-306 | ACPTS | 1 | |
| MTS-3060 | ACPTS | 1 | |
| MTTACH1A4 | WHEEL SURFACE ADAPTOR | 1 | |
| MWS905GS | AC/DC ADAPTER FOR THE DISPLEY UNIT | 1 | |
| Model: ADT−MEZ1000 | AC ADAPTOR | 1 | |
| N18061 | AC ADAPTER 16V 45A | 1 | |
| N4156100 | ADAPTOR, ACCESSORY FOR IV9435GX | 1 | |
| NAS 7703-9 | NOSE LEARJET 40/45 JACKPAD ADAPTERS | 1 | |
| NB307100 | 1. AIRCRAFT TIRE INFLATION ADAPTER - LONG REACH FOR SMALL SIZE TIRE VALVES | 2 | |
| NB485100 | LARGE 12V SCREW ON INFLATION ADAPTER (LONG REACH ADAPTER) | 2 | |
| NB485100-2M | INFLATION HOSE WITH LARGE 12V SCREW-ON INFLATION ADAPTER (LONG REACH ADAPTER) | 1 | |
| NDSG600A | 6PC 12PT SFTGR FRAC NUTDRV ST | 1 | |
| NDT1052 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 AND 737 51- 00-26. FASTENER (BACB30FN8-2, BACR15CE8D-2, BACR15BB8D-2). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3118 | Boeing Reference Standard, 737 PT6 52-30-01:FIG3 PG6, BACB30FN6-2 or -3 fasteners | 3 | |
| NDT3118/MF | Boeing Reference Standard, 737 PT6 52-30-01:FIG3 PG6, BACB30FN6-2 or -3 fastners | 1 | |
| NDT3237-0.040/0.010 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.050/0.015 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.130/0.020 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT514 | BOEING REFERENCE STANDARD 757 PT 6 57-20-01. BOEING REFERENCE STANDARD 757 PT 6 57-20-01 FASTENER. Includes Test Report and Certificate of Conformance. FASTENER (BACB30VU12K14 + BACC30M12, BACBVU10K13 + BACC30M10) | 1 | |
| NDT569 | BOEING REFERENCE STANDARD 757 PT 6 53-40-07 FASTENER (BACR15FV6KE). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT652 | BOEING REFERENCE STANDARD 767 PT 6 57-20-07 FASTENER (BACB30YP10K6) Includes Test Report and Certificate of Conformance | 4 | |
| NDT690-P1 | POSITIONER PT 4 57-50-04. MATERIAL: ACETAL(DELRIN). Includes Certificate of Conformance. | 3 | |
| NDT690-P2 | POSITIONER PT 4 57-50-04. MATERIAL: ACETAL(DELRIN). Includes Certificate of Conformance. | 3 | |
| NDT690-P3 | POSITIONER PT 4 57-50-04. MATERIAL: ACETAL(DELRIN). Includes Certificate of Conformance. | 3 | |
| NDT745 | BOEING REFERENCE STANDARD 777 PT 6 57-20-01 FASTENER (BACB30WQ7K15L + BACN10TN7K). Includes Test Report and Certificate of Conformance. | 2 | |
| NDT747-1 | BOEING REFERENCE STANDARD 777 PT 6 53-00-11 FASTENER (BACR15FVKE). Includes Test Report and Certificate of Conformance. | 2 | |
| NDT747-2 | BOEING REFERENCE STANDARD 777 PT 6 53-00-11 FASTENER (BACR15FV8KE). Includes Test Report and Certificate of Conformance. | 2 | |
| NEC-1006 | SPECIAL SURFACE PROBE, -3 PER 747 PT6 53-30-18 PG2, 737 PT6 53-30-22 PG1, 25-100KHZ, .2 DROP | 2 | |
| NGC-4500-6ACH2 | NGC-4500-6ACH2;WX4500 Cat6A Channel Adapter Pair | 1 | |
| NGC-4500-6ALINT1 | NGC-4500-6ALINT1;WX4500 Cat6A Permanent Link Interface Adapter | 1 | |
| NGC-4500-COAX | NGC-4500-COAX;NGC-4500 Coax Adapter Pair _75 ohm F-Type Interface | 1 | |
| NSA855010GV08 | COUPLING ADAPTER, PRESSURE TEST, ACT | 2 | |
| NSC-LOOPBACK-10G | NSC-LOOPBACK-10G;L2/L3 10G Loopback Option | 1 | |
| NSC-LOOPBACK-10G-1Y | NSC-LOOPBACK-10G-1Y;L2/L3 10G Loopback Timed Option - 1 Years | 1 | |
| NSC-LOOPBACK-10G-2M | NSC-LOOPBACK-10G-2M;L2/L3 10G Loopback Timed Option - 2 Months | 1 | |
| NSC-LOOPBACK-10G-2Y | NSC-LOOPBACK-10G-2Y;L2/L3 10G Loopback Timed Option - 2 Years | 1 | |
| NSC-LOOPBACK-10G-3Y | NSC-LOOPBACK-10G-3Y;L2/L3 10G Loopback Timed Option - 3 Years | 1 | |
| NSC-LOOPBACK-10G-4Y | NSC-LOOPBACK-10G-4Y;L2/L3 10G Loopback Timed Option - 4 Years | 1 | |
| NSC-LOOPBACK-10G-5Y | NSC-LOOPBACK-10G-5Y;L2/L3 10G Loopback Timed Option - 5 Years | 1 | |
| NSC-LOOPBACK-10G-U1 | NSC-LOOPBACK-10G-U1;L2/L3 10G Loopback Upgrade Option | 1 | |
| NSN 5895-01-177-5132 | SMART BREACH PLATE ADAPTER(SBPA) 5895-01-177-5132 | 1 | |
| NT-C24002-78 | JACK ADAPTER | 1 | |
| NU.SGQEK.006 | ACER ASPIRE ONE 725 LAPTOP | 1 | |
| O22827000 | Jack Adaptor | 1 | |
| O2N2FP0099 | GAUGE GLYCERINE FILL TYPE 233.54, SIZE: 2½”, WETTED PARTS: 316 SS, CONNECTION: LOWER AND BACK MOUNT, CONN. SIZE 1/4" NPT | 1 | |
| OCC56C-ACE | OCC56C-ACE;2277/41 Optical Channel Checker C-Band PC SC mounted FC enclosed | 1 | |
| OFF111390 | BHGE,SPT,REPLAC,GEARBOX,OFF111390 | 1 | |
| OHME65B80713-1 | HANDLING EQPT - HORIZONTAL STABILIZER ACTUATOR | 5 | |
| OLIGHT WARRIOR 3S | TORCHE LED LAMP PUISSANTE 2300 LUMENS 300M RECHARGEABLE TACTIQUE IPX8 WITH PROXIMITTE CAPTOR | 1 | |
| OMNI-A-ADP27 | SCANNER INTERFACE ADAPTOR TO LINK A MALE LEMO | 1 | |
| ONA10-100GE-NOPT | ONA10-100GE-NOPT;ONA-1000 100G Package with 100GE No Optics | 1 | |
| ONA10-10G-100G-400G | ONA10-10G-100G-400G;ONA-1000 10GE 100GE 400GE Package with Optics | 1 | |
| ONA10-10G-100G-400G-NOPT | ONA10-10G-100G-400G-NOPT;ONA-1000 package with 10GE 100GE 400GE No Optics | 1 | |
| ONA10-200GE-400GHW-NOPT | ONA10-200GE-400GHW-NOPT;ONA-1000 Package 400G-ready Module with 200GE No Optics | 1 | |
| ONA10-400GE-100G-NOPT-G | ONA10-400GE-100G-NOPT-G;ONA-1000 400G Package with 400G and 100G Modules No Optics/WiFi/BT - TAA | 1 | |
| ONA10-400GE-100GE-NOPT | ONA10-400GE-100GE-NOPT;ONA-1000 package with 400G and 100G Modules with 400GE 100GE No Optics | 1 | |
| ONA10-400GE-FR4 | ONA10-400GE-FR4;ONA-1000 400G Package with 400GE and FR4 optics | 1 | |
| ONA10-400GE-FR8 | ONA10-400GE-FR8;ONA-1000 400G Package with 400GE and FR8 optics | 1 | |
| ONA10-400GE-NOPT | ONA10-400GE-NOPT;ONA-1000 400G Package with 400GE No Optics | 1 | |
| ONA10-400GE-NOPT-G | ONA10-400GE-NOPT-G;ONA-1000 400G Package with 400GE No Optics No wifi No BT - TAA | 1 | |
| ONA10-400GE-NOPT-NOG | ONA10-400GE-NOPT-NOG;ONA-1000 400G Package with 400GE No Optics No wifi No BT | 1 | |
| ONA10-64GFC-NOPT | ONA10-64GFC-NOPT;ONA-1000 package with 64GFC No Optics | 1 | |
| ONA10-DUAL400G-NOPT | ONA10-DUAL400G-NOPT;ONA-1000 Package with two 400G Modules 400GE No Optics | 1 | |
| ONA10K-100GE-NOPT | ONA10K-100GE-NOPT;ONA-1000 special handling package 100G Module with 100GE No Optics | 1 | |
| ONA10U-100GE-400GHW-NOPT | ONA10U-100GE-400GHW-NOPT;ONA-1000 US 400G-ready Package 100GE No Optics | 1 | |
| ONA10U-100GE-NOPT | ONA10U-100GE-NOPT;ONA-1000 US 100G Mod Package 100GE No Optics | 1 | |
| ONA10U-10G-100G-400G | ONA10U-10G-100G-400G;ONA-1000 US 10GE 100GE 400GE Package with Optics | 1 | |
| ONA10U-10G100G-400G-NOPT | ONA10U-10G100G-400G-NOPT;ONA-1000 US 10GE 100GE 400GE Package No Optics | 1 | |
| ONA10U-400GE-FR4 | ONA10U-400GE-FR4;ONA-1000 US 400G Package with 400GE FR4 optics | 1 | |
| ONA10U-400GE-NOPT | ONA10U-400GE-NOPT;ONA-1000 US 400G Package with 400GE No Optics | 1 | |
| ONA10U-64GFC-NOPT | ONA10U-64GFC-NOPT;ONA-1000 US 100G Mod Package 100GE No Optics | 1 | |
| ONA10U-DUAL400G-NOPT | ONA10U-DUAL400G-NOPT;ONA-1000 US Package with two 400G Modules 400GE No Optics | 1 | |
| ONA8-ATT-1-400G-ATS | ONA8-ATT-1-400G-ATS;ONA800 for ATT 4x100GE Dual Port 400GE to 1GE OTN Optics AOCDAC hard case | 1 | |
| ONA8-ATT-100-400G-OPT | ONA8-ATT-100-400G-OPT;ONA800 for ATT with 400GE 4x100GE 100GE Optics AOC DAC support hard case | 1 | |
| ONA8-VW-1G-200G | ONA8-VW-1G-200G;ONA 800 Verizon Wireless Package 10/100/1000 to 200E with optics | 1 | |
| ONA800-ATT-1-400G-OPT | ONA800-ATT-1-400G-OPT;ONA800 for ATT w Dual-port 400GE 100GE 10GE 1GE Optics 4x100GE DAC softcase | 1 | |
| ONX-2XX-SW-OPT-SAA | ONX-2XX-SW-OPT-SAA;OneExpert 2XX - Software Option Smart Access Anywhere | 1 | |
| ONX-CATV-SW-RSG-LOOP | ONX-CATV-SW-RSG-LOOP;Software Option/ OneExpert CATV/ Return Signal Generator w/ Loopback | 1 | |
| ONX-SMART-ACCESS | ONX-SMART-ACCESS;SmartAccess Anywhere Option | 1 | |
| ONX-SMART-ACCESS-U1 | ONX-SMART-ACCESS-U1;SmartAccess Anywhere Upgrade Option | 1 | |
| OP76S35Q3CEKLAN | 7/16" Steel Modified D Keylock 3-Stage Quik-Lok Black Captive-Eye ANSI | 1 | |
| OPGF55Q3CENFPA | G-FIRST Aluminum Keylock 3-Stage Quik-Lok Black Captive-Eye NFPA & ANSI | 1 | |
| OPGF55QCENFPA | G-FIRST Aluminum Keylok Quik-Lock Captive Eye Black | 1 | |
| OPTIMETER-FCPROBE-LUM-K3 | OPTIMETER-FCPROBE-LUM-K3;Lumen Optimeter with FiberChek Probe Package | 1 | |
| OT900-0551/0927/1617 | ACCEPTANCETEST FIXTURE P/N.OT900-0551/0927/1617 | 1 | |
| OT900-0927 | CAPT. SEAT TRACK FIXTURE | 2 | |
| OT900-0973 | ACCEPTANCE TEST FIXTURE | 1 | |
| OTC503896 | RACE PULLER ADAPTER | 1 | |
| OU144970 | Acceptance Fixture | 1 | |
| OUT70 | OUTIL MONTAGE RECEPTACLE | 3 | |
| Olympus HSMT-Flex Manual Scanner | Olympus HSMT-Flex Manual Scanner - ToFD & PA Scanner, Folding frame to optimise probe contact, Supports up to 4 probes on pipes, Supports up to 8 probes on flat surface | 1 | |
| Olympus Hydroform Scanner | Olympus Hydroform Scanner - Corrosion mapping scanner, Utilises an ingenious water-column concept that eliminates the need for a wedge, Provides excellent near-surface resolution | 1 | |
| P-39 | PACKAGE OPTION P39 | 10 | |
| P058425 | Air Scribe Kit (Description: Air Scribe, Stylus, Hose & Filter Ass'y Only) (Add to cart: Add To Cart) (Description: Complete Kit) (Add to cart: Add To Cart) (Description: Carbide Tipped Stylus Only) (Add to cart: Add To Cart) (Description: Replacement Par | 1 | |
| P29TF65 | VISUAL ACCEPTABILITY LIMITS FOR FAN BOOSTER AND COMPRESSOR B | 1 | |
| P60377 | RECEPTACLE DESICCANT - SADDLE BAG | 1 | |
| P75400M-4C | ADAPTER - PITOT TEST (INCLUDED IN 787 AIR DATA ACCESSORY KIT P/N ADA787-612) | 3 | |
| P75701-4 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) CSA75700HT-3/P75701-4/P75701M2-3 | 14 | |
| P75701HT-4 | ADAPTER - TEST, ELEVATOR FEEL (INCLUDED IN AIR DATA ACCESSORY KIT | 1 | |
| P75701M2-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT, PN ADA737-678) | 11 | |
| P77796HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 5 | |
| P781642 | GAUGE 0-160PSI&0-1000kpa, back mount, 1/4 NPT (SUPPLY CERTIFICATE) | 1 | |
| PA-0036 | PITOT STATIC ADAPTER, AND ACCESSORY KIT, A320 | 1 | |
| PA-0036A | PITOT & STATIC ADAPTOR & ACCESORY KIT (FOR A320) | 2 | |
| PCD-3000 | PERSONAL COMPUTER DATA LOADING SYSTEM NOTE IN ADDITION TO THE PCD-3000 PACKAGE, THE USER WILL ALSO REQUIRE A LAPTOP (25MHZ 486 PROCESSOR MINIMUM), A CD DRIVE, AND A PCMCIA TYPE II SLOT. (ROCKWELL COLLINS) | 1 | |
| PD2660 | ADAPTER REACTION TOUQUE | 1 | |
| PF53481-9P | CART, SERVICE - LANDING GEAR STRUT (5 GAL CAPACITY WITH HANDPUMP, HOSE, AND GRAVITY FILL ADAPTER) (MALABAR INTERNATIONAL) | 6 | |
| PF80-012 | DEACTIVATOR - CHECK VALVE (OPTIONAL) | 1 | |
| PF80-012-500 | DEACTIVATOR ADAPTOR | 13 | |
| PLT-200 | OPTICAL/LASER POCKET TACHOMETER | 4 | |
| PLT-200KIT | OPTICAL/LASER POCKET TACHOMETER | 1 | |
| PLT200 | Portable Optical Tachometer | 4 | |
| PLT6344-01-01 | ACCEPTANCE TEST STATION | 1 | |
| PM40684 | FLIGHT PACK TOILET ADAPTOR | 1 | |
| PM60806 | DRAIN WATER/FUEL DRAINSAMPLING RECEPTACL | 1 | |
| PME3321B2650-1 | JACK ADAPTER VSCF AND IDG | 1 | |
| PME3321B26501 | JACK AND ADAPTER IDG | 1 | |
| PME65B89603 | ADAPTADOR LEVANTAMIENTO ACCESORIOS JT9 | 1 | |
| PMXOSE100 | OIL SEAL EXTRACTOR ADAPTOR | 1 | |
| POCPLBR0016K | PORTACOOL HOSE ADAPTOR KIT | 1 | |
| PPG-ASSEMBLY-59041 | IPT CUSTOM MANIFOLD WITH 9/16” HIGH-PRESSURE FEMALE C&T, NACE COMPLIANT | 1 | |
| PR-520 | LIGHT PHOTOMETER - HANDHELD. SYSTEM INCLUDES PR524 LITEMATE-4 (ILLUMINANCE METER), PR-522 SPOTMATE OPTICS ATTACHMENT ( (PHOTO RESEARCH INC.) | 1 | |
| PRESSURE FUELING NOZZLE WITH G | LANDING GEAR STRUT BLEED JACK (OPTIONAL) | 1 | |
| PRESSURE REGULATOR, 0 - 5 PSI | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| PS-120W-L1T8M | AC/DC POWER SUPPLY ADAPTOR | 1 | |
| PS12246 | MCDU ACCEPTANCE TEST SOFTWARE DISK | 1 | |
| PS12263 | MCDU ACCEPTANCE TEST SOFTWARE DISK | 1 | |
| PS12264 | MCDU ACCEPTANCE TEST SOFTWARE DISK | 1 | |
| PS6-80000-00 | T2195 SJB TEST BOX WITH 100-240V AC TO 9V DC 1.2A, 10,8W POWER ADAPTER | 1 | |
| PSA927 | AFT JACK ADAPTOR | 1 | |
| PSD40-502 | INTERFACE ADAPTER | 8 | |
| PSD40-502-3 | INTERFACE ADAPTER | 8 | |
| PSD737-1 | INTERFACE UNIT/FUEL QUANTITY INDICATING SYSTEMA ADAPTER KIT | 9 | |
| PSDA300-4 | FQIS INTERFACE ADAPTER | 1 | |
| PSDAF-102 | INTERFACE ADAPTER | 1 | |
| PSDAF-102A | INTERFACE ADAPTER | 2 | |
| PSDAF-102B | INTERFACE ADAPTER | 1 | |
| PSS22300-3-4-4 | ACCESSORIES ADTS PITOT STATIC TEST ADAPTER (EQUIP WITH HOSE) | 10 | |
| PSS59101-4-6-6 | Pitot Test Adaptor - Blackhawk Nighthawk; UH60L, UH60A & HH60D | 2 | |
| PSS76700M2-3-4-4 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 6 | |
| PSS76700M22-3-4-4 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
| PT103 | SPTA 29PCS DRILL BUFFING PAD DETAIL POLISHING PAD MIX SIZE KIT WITH 5/8-11 THREAD BACKING PAD & ADAPTERS FOR CAR SANDING, POLISHING, WAXING (29PCS MINI POLISHING PAD SET2) | 1 | |
| PT45P1CQL02-D-T-FM-CM | PROCESS GAUGE, 4.5” DIAL, FRONT FLANGE, BLACK CASE, ACC. ±0.5 FS, 1/4" NPT FEMALE BACK CONNECTION, INTERNAL ZERO ADJUSTMENT, DUAL SCALE, -15 PSI TO 30 PSI/ 1000 KPA | 1 | |
| PT5CMPK | PT5C/PT5CBL 30 PACK/DISPLAY | 1 | |
| PTS-2 | 855;PTS-2 AC/DC/Megger Precision Transfer | 1 | |
| PWA 100014 | BENDER CHANGE LETTER A, PNEUMATIC (INITIAL BEND) (REPLACES PWA 78013 AND OPTIONS | 1 | |
| PWA 101618 | ADAPTER-ACTUATOR 2.5 BLEED VALVE | 4 | |
| PWA 111357 | VACUUM CHECKADAPTER | 1 | |
| PWA 25040 | BRACKET, SUPPORT (OPTIONAL TO PWA 85195 BRACKET FOR ENGINES WITH EXHAUST NOZZLE REMOVED) | 2 | |
| PWA 25041 | BRACKET, SUPPORT (OPTIONAL TO PWA 85195 BRACKET FOR ENGINES WITH EXHAUST NOZZLE REMOVED) | 2 | |
| PWA 25567 | PULLER-ENG LPT COUPLING SPACER | 2 | |
| PWA 28414 | BRACKET, SUPPORT (TWO REQUIRED) (OPTIONAL TO PWA 85195 BRACKETS FOR ENGINE HORIZONTAL SUPPORT) | 1 | |
| PWA 75228 | SPACER SEGMENT.LPT ROTOR BUILD | 2 | |
| PWA 78013 | BENDER, PNEUMATIC (OPTIONAL TO PWA 100013) (REPLACED BY PWA 100014 CHANGE LETTER A) | 1 | |
| PWA 80285 | SLING, STRINGBACK (OPTIONAL TO PWA 81959) | 1 | |
| PWA 85258A | PULLER JACKSCREW LPT | 1 | |
| PWA 85578 | RING SPACER HPT CASE | 1 | |
| PWA 87164 | HEATER, ELECTRICAL - LPT, FIFTH STAGE DISK AND BLADE ASSEMBLY REAR FACE | 1 | |
| PWA-28106 | ADAPTADOR RACOR | 4 | |
| PWA100014 | BENDER, PNEUMATIC (INITIAL BEND, 6TH STAGE BLADE LOCKS) (REPLACES PWA 78013 AND OPTIONS) | 1 | |
| PWA101179 | PULLER JACKSCREW LPT | 1 | |
| PWA101618 | ADAPTER-ACTUATOR 2.5 BLEED VALVE | 4 | |
| PWA101833 | PUSHER JACKSCREW LPT | 1 | |
| PWA102285 | ADAPTER - TORQUE, IDG AIR/OIL COOLER SUPPORT BRACKET | 1 | |
| PWA102462 | ROD ASSEMBLY (HPT INSTALLATION) (PRE SB PW4ENG 72-562) (REPLACED BY PWA 104281) | 1 | |
| PWA103310 | BRACKET SUPTTRUNNION | 1 | |
| PWA103347 | BRACKET, SUPPORT (OPTIONAL) | 1 | |
| PWA103618 | BRACKET SUPTTRUNNION | 1 | |
| PWA103668 | ADAPTER - VACUUM CHECK | 1 | |
| PWA105055 | ADAPTER, LIFTING (CORE UNIT FRONT) (PRE AND POST SB PW4G-100-72-138) (REPLACES BY PWA 85390) | 1 | |
| PWA105266 | ADAPTER - VACUUM CHECK | 1 | |
| PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | 1 | |
| PWA107733 | ADAPTER-VACUUM CHECK | 1 | |
| PWA111085 | ADAPTER, VACUUM CHECK | 1 | |
| PWA111232 | ADAPTER, VACCUM CHECK - #3 BRG COMP-#8 PORT | 1 | |
| PWA111357 | ADAPTER,VACCUM CHECK-ENGINE ASSY , #1 THRU 2 BRG COMPART | 1 | |
| PWA111459 | ADAPTER, TORQUE -#2 BEARING OUTER RACE, NUT, REMOVE | 1 | |
| PWA111604 | ADAPTER, VACUUM AND FLOW CHECK | 1 | |
| PWA111723 | PROTRACTOR ADAPTER | 1 | |
| PWA115399 | ADAPTER FOR JACK AND SUPPORT FIXTURE | 3 | |
| PWA12386 | ADAPTER ASSEMBLY INTERFACE DEVICE | 3 | |
| PWA211628 | VACUUM ADAPTER | 1 | |
| PWA212262 | TOOL-ADAPTER REMOVER IGNITER INSERT ACFT | 4 | |
| PWA24524 | ADAPTER-ACTUATOR 2.5 BLEED VALVE | 10 | |
| PWA24667 | HYD JACK - GEARBOX REMOVAL/INSTAL__TO FACILITATE REM/ OR INSTAL COMPT__254 X 610 X 1219 MM / 113.5 KG__[PN_PWA24667] | 1 | |
| PWA25040 | BRACKET - SUPT & TRUNNION, TEC_ENG ASSEMBLY TURBINE EXHAUST CASE_267 X 203 X 203 MM / 12.7 KG_[PWA25040] | 2 | |
| PWA25041 | BRACKET, SUPPORT (OPTIONAL TO PWA 85195 BRACKET FOR ENGINES WITH EXHAUST NOZZLE REMOVED) | 2 | |
| PWA25270 | ADAPTER - AGB BACKLASH CHECK_[PWA25270] | 2 | |
| PWA25444 | ADAPTER - T/S/COUPLING OUTER RACE NUT_[PWA25444] | 2 | |
| PWA25446 | ADAPTER - T/S/COUPLING OUTER RACE WR_[PWA25446] | 2 | |
| PWA25488 | SPACER NUT SET - LPT SHAFT HANDLG,TIEROD_[PWA25488] | 2 | |
| PWA25504 | SQUEEZER,HYD - LPT SPACER TO SHAFT_[PWA25504] | 2 | |
| PWA25552 | EXPANDER - LPT REAR BAL BRG SPACER_[PWA25552] | 1 | |
| PWA25567 | PULLER - ENG ASSY LPT COUPLING SPACER_[PWA25567] | 2 | |
| PWA25569 | ADAPTER, CONC. CHK - BRG, BAL REAR RACE_[PWA25569] | 1 | |
| PWA25570 | ADAPTER, CONC. CHK - BRG, BAL. OUTER RAC_[PWA25570] | 1 | |
| PWA25577 | ADAPTER, WEIGHT - HPC BAL BRG INR RACE_[PWA25577] | 2 | |
| PWA27263 | ADAPTER - CONTACT ANGLE, BRG #1 CONT_[PWA27263] | 1 | |
| PWA27264 | ADAPTER, INSP - #2 BRG SPACER MEASURET_[PWA27264] | 1 | |
| PWA27407 | ADAPTER, BRG - LPC BAL ARBOR INN RACE_[PWA27407] | 1 | |
| PWA27408 | ADAPTER, INSP - LPC BAL ARBOR OUTR RACE_[PWA27408] | 1 | |
| PWA28414 | BRACKET, SUPPORT (OPTIONAL TO PWA 85195 BRACKET FOR ENGINE HORIZONTAL SUPPORT) | 1 | |
| PWA28940 | ADAPTER-TORQUE 3.0 BLEED VALVE CONTROL FEEDBACK LEVER | 4 | |
| PWA29156 | GAGE - GROOVE DEPTH, FAN CASE RUBSTRIP PROTECTIVE MAT - RUBBER, MANUFACTURERS ASSOCIATION, GRADE SC43, NEOPRENE SPONGE, 1 INCH THICK, APPROXIMATELY 3 X 4 FEET WITH WARNING STREAMER ATTACHED | 7 | |
| PWA29451 | ADAPTER, HYD PUMP - VSV ACTUATOR_0.45KG / 32 X 32 X 65MM [PWA29451] | 7 | |
| PWA29646 | SPACE BALANCE LPT | 2 | |
| PWA45011 | EXTRACOR -LPT SHAFT COUPLING NUT RE | 1 | |
| PWA45243 | LPT GAUGE SPACER PLIES | 1 | |
| PWA45505 | Adapter , Vacuum CHECK | 2 | |
| PWA45506 | Adapter, Vacuum Check | 1 | |
| PWA47036 | PUIIER-SPACER BRG NO 5HPT SHAFT | 4 | |
| PWA50361 | ADAPTER ASSEMBLY,INTERFACE DEVICE | 1 | |
| PWA52788 | ADAPTER ASSEMBLY,INTERFACE DEVICE | 1 | |
| PWA75228 | SPACER SEGMENT-LPT ROTOR BUILD_[PWA75228] | 2 | |
| PWA75735 | PUSHER JACKSCREW LPT | 1 | |
| PWA75751 | PUSHER JACKSCREW LPT | 1 | |
| PWA75848 | LIFTING EYE - HPT 1ST STG TURBINE_REPLACEDFROMPWA25467_[PWA75848] | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80649 | ADAPTER, ATTACHING | 1 | |
| PWA81337 | ADAPTER, VACUUM CHECK | 1 | |
| PWA85078 | PULLER JACKSCREW LPT | 2 | |
| PWA85079 | PUSHER JACKSCREW LPT | 1 | |
| PWA85081 | PULLER JACKSCREW LPT | 1 | |
| PWA85082 | PULLER JACKSCREW LPT | 1 | |
| PWA85112 | BRACKET HANDLING HPT | 1 | |
| PWA85124 | PULLER JACKSCREW LPT | 1 | |
| PWA85298 | PULLER, JACKSCREW (OPTIONAL TO PWA 102919) | 1 | |
| PWA85306 | ADAPTER VACUM CHECK INTER. INNER FLANGE | 7 | |
| PWA85390 | ADAPTER, LIFTING (CORE-UNIT, FRONT) (PRE SB PW4G-100-72-138) (REPLACED BY PWA 105055) | 1 | |
| PWA85434 | PULLER, JACKSCREW (OPTIONAL TO PWA 87053) | 1 | |
| PWA85475 | PLUG, VACUUM CHECK (OPTIONAL TO PWA 101110) | 1 | |
| PWA85478 | ADAPTER - VACUUM CHECK | 1 | |
| PWA85481 | ADAPTER, VACCUM CHECK (SUPERSEDED BY PWA 86315) | 1 | |
| PWA85498 | ADAPTER,VACUUM CHECK-GEARBOX DEOILER OUTLET | 1 | |
| PWA85568 | FIXTURE MACH.CONTRAINT HUB LPT FIFTH STAGE | 1 | |
| PWA85662 | BRACKET (OPTIONAL TO PWA 85667) | 1 | |
| PWA85682 | Fixture, Constraint - Hub, LPT 5th Stage, Machining & Inspection | 2 | |
| PWA85843 | ADAPTER-VACUUM CHECK-EXHAUST CASE OIL SCAVENGE | 1 | |
| PWA85845 | ADAPTER-VACUUM CHECK-ENGINE ASSEMBLY GEARBOX | 1 | |
| PWA85863 | ADAPTER - VACUUM CHECK | 1 | |
| PWA85928 | ADAPTER TORQUE 2.5 BLEED VALVE ACTUATOR | 1 | |
| PWA85981 | ADAPTER VACUUM CHECK | 1 | |
| PWA86136 | ADAPTER, VACUUM CHECK (LMT) | 1 | |
| PWA86315 | ADAPTER, VACCUM CHECK (SUPERSEDES PWA 85481) | 1 | |
| PWA86540 | PULLER JACK SCREW HPT | 1 | |
| PWA87053 | PULLER, JACKSCREW (OPTIONAL TO PWA 85434) | 1 | |
| PWA88112 | ADAPTER, VACUUM CHECK - GEARBOX BREATHER | 1 | |
| PWA88125 | ADAPTER, VACUUM CHECK | 1 | |
| PWA88707 | Vacuum Check Adapter | 1 | |
| PWC30332 | PT HOLDBACK WRENCH | 7 | |
| PWC30649 | spacer adapter | 2 | |
| PWC31084 | SPACER, HPT SHROUD SEGMENT | 2 | |
| PWC31236 | ADAPTER SPACER | 1 | |
| PWC32000 | BRACKET PT6 MOUNT | 1 | |
| PWC37052 | Backlash adapter | 1 | |
| PWC37267 | Splined Adapter PT Pack | 2 | |
| PWC37502 | ADAPTER, MEASURING, UPPER TOWER SHAFT SPACER | 1 | |
| PWC37561 | ADAPTER #6 BRG SPACER MEASUREMENT | 2 | |
| PWC37562 | ADAPTER SPACER | 4 | |
| PWC37564 | FIXTURE FOR PT SPACER THICKNESS DETERMINATION | 3 | |
| PWC37869 | BASE, PT ROTOR SPACER | 4 | |
| PWC38231 | LOCKING RING,ADAPTER,JACK SCREWS | 3 | |
| PWC40562 | Engine Sling Bracket Adapter | 4 | |
| PWC40624 | Acc. Adapter kit | 1 | |
| PWC40625 | Acc. Adapter kit | 1 | |
| PWC40986 | LOOPBACK ADAPTER CAB | 1 | |
| PWC40986-REV- | LOOPBACK ADAPTER CABLE | 1 | |
| PWC48032 | bracket adapter | 1 | |
| PWC48074 | GAUGE HPT SPACER | 2 | |
| PWC54148 | Grinding Arbor PT Pack Assembly | 1 | |
| PWC54212 | ADAPTER, SLING, TURBOMACH | 7 | |
| PWC54212D | ADAPTER SLING TURBOMACHINERY | 1 | |
| PWC54213 | ADAPTER, SLING, ENGINE/TURBOMACHINERY, REAR | 7 | |
| PWC54213F | ADAPTER, SLING, ENGINE/TURBOMACHINERY, REAR | 3 | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | 1 | |
| PWC54746 | GUIDE, FUEL MANIFOLD ADAPTER PACKINGS | 7 | |
| PWC57411 | ADAPTER, MOTIVE SPACE FLOW | 5 | |
| PWC58834 | ACOC COOLING DUCT ADAPTER | 1 | |
| PWC61345 | DRIFT ADAPTER-AC GEN | 4 | |
| PWC62098 | ADAPTER REACTION | 1 | |
| PWC62209 | Adapter BRACKET | 3 | |
| PWC62844 | GAUGE SPACER HPT | 1 | |
| PWC63025 | GUIDE HPT PACK | 1 | |
| PWC63288-16 | BRACKET ADAPTER PW305&PW306 | 1 | |
| PWC63288-17 | Bracket Adapter PW308 | 1 | |
| PWC63288-32 | BRACKET ADAPTER PW307 | 1 | |
| PWC64051 | ADAPTER PLUS QTY 1 EACH NUT, WASHER & T-BOLT | 5 | |
| PWC64598 | GAGE MEASURING PT DISC SPACER | 2 | |
| PWC67487 | packaging adapter | 1 | |
| PWC69817 | vac. test adapter | 1 | |
| PWC69818 | Vacuum adapter | 1 | |
| PWC69819 | Vacuum adapter | 1 | |
| PWC70367 | IMPELLER BACKFACE IS CLEAN PLACE Adapter | 3 | |
| PWC71392 | HYDRAULIC ADAPTER (REPLACES PWC32505 | 6 | |
| PWC71416 | BRACKET PT6 MOUNT | 6 | |
| PWC71416. | BRACKET PT6 MOUNT | 6 | |
| PWC72744 | ASS'Y PT6A-140 ACCESSORIES | 1 | |
| PWC72909 | CONDUCTION HEATER PT PACK | 1 | |
| PWC72931 | PARKING STAND BRACKET ADAPTOR RGB | 1 | |
| PX24 | Light Duty Bench Brake (Capacity: FLOOR STAND 160lbs ship weight) (Add to cart: Add To Cart) (Capacity: 16 ga.) (Maximum bend length: 24") (Maximum box depth: 3") (Maximum bend angle: 135") (Minimum reverse bend: 1/4") (Add to cart: Add To Cart) | 1 | |
| PYR-FDOO01D23654000 | N.L.G. JACKING ADAPTER | 1 | |
| PYR-FDOO01D23664000 | JACKING M.L.G ADAPTER | 1 | |
| PYT1500029 | QUICK SPIN ADAPT LARGE 10PACK | 1 | |
| PYT1500030 | QUICK SPIN ADAPT XL 10PACK | 1 | |
| Phoenix ISL Tracer Scanner | Phoenix ISL Tracer Scanner - Corrosion mapping or Composite inspection, Freehand scanning without constraints, Can be used with Omniscan SX or MX2, Optional hydroform cradle | 1 | |
| Q47963 | ADAPTADOR DE ACO | 7 | |
| QSU2-400 | QUATECH INTERFACE MODULE SERIAL ADAPTER 4 PORT USB | 1 | |
| R-1117 | ADAPTER JACK | 13 | |
| R-117 | FRONT JACK ADAPTER | 1 | |
| R-1187-01 | ADAPTOR, JACK | 4 | |
| R-1187-02 | ADAPTOR, JACK | 4 | |
| R-1239 | ADAPTER KIT FOR JACK PAD (PART OF TRONAIR JACK) | 8 | |
| R-1276 | Tronair R-1276 Cessna Citation III, VI, VII Main Gear Tripod Jack Pad Adaptor | 1 | |
| R-1733 | ADAPTER, WING JACK | 1 | |
| R-1798 | ADAPTER- MLG JACK PAD | 7 | |
| R-1807 | Tronair R-1807 Cessna Citation X Main Gear Tripod Jack Pad Adaptor | 7 | |
| R-1808 | Tronair R-1808 Cessna Citation X Nose GearTripod Jack Pad Adaptor | 7 | |
| R-1961 | Tronair R-1961 Sikorsky Seahawk, Jayhawk, Blackhawk Tailgear Tripod Jack Pad Adaptor | 1 | |
| R-1988 | ADAPTER JACK | 13 | |
| R-2008 | Tronair R-2008 Cessna Excel, CJ4, 525 & 525A Nose Gear Tripod Jack Pad Adaptor | 4 | |
| R-EC135-EC145-JACKING | EC135/EC145 JACKING ADAPTER KIT | 1 | |
| R1117 | NOSE JACKING ADAPTERS | 13 | |
| R1187-01 | PAD: ADAPTER,JACK, | 4 | |
| R1187-02 | PAD: ADAPTER,JACK, | 4 | |
| R1239 | PAD: ADAPTER,JACK, | 8 | |
| R1798 | PAD: ADAPTER,JACK, | 7 | |
| R1807 | PAD: ADAPTER,JACK, | 7 | |
| R1808 | PAD: ADAPTER,JACK, | 7 | |
| R1988 | MAIN JACKING ADAPTERS | 13 | |
| R2008 | PAD: ADAPTER,JACK, | 4 | |
| RA-RAFX-6 | FLEX SHAFT ADAPTER FOR RECHII SCANNER MALE CONNECTOR TO RECHII RA PROBE, (4PIN STEP LEMO RECEPTACLE FEMALE CONNECTOR) WITH SLIDING COLLAR, 6.0" LONG. Includes Test Report and Certificate of Conformance | 1 | |
| RA-URFX-12 | FLEXIBLE ROTARY PROBE ADAPTOR MALE 4 PIN STEP LEMO TO RECEPTACLE (FEMALE) 4-PIN FISCHER CONNECTOR 12.0" WORKING LENGTH | 1 | |
| RB 145G0076-301 | Reaction Adapter, Forward Transmission | 1 | |
| RB T103104 | Backlash And Adapter Removal Outboard Quill | 1 | |
| RB23006782 | Adapter, Torque Turbine Attach Lower Nut | 2 | |
| RB23006783 | Adapter, Torque Turbine Attach Upper Nut | 3 | |
| RB23006783-A | Adapter, Torque Turbine Attach | 1 | |
| RB23058409 | REAR PTO SEAL & SPACER PULLER | 2 | |
| RB6893376 | Attaching Gas Producer Turbine Assembly Fixture Adapter | 1 | |
| RBE105-31762W4 | Receptacle | 2 | |
| RBE332A91-4105-02 | Jack Adapter Pad, Main Landing Gear, Tool | 2 | |
| RBE332A91-4200-00 | JACK ADAPTER PAD NOSE GEAR | 2 | |
| RBE332A91-4205-00 | JACK ADAPTER PAD NOSE GEAR | 1 | |
| RBT18407 | Adapter Set, Jacking | 1 | |
| RBT18501 | Adapter, Torque Turbine Attach | 2 | |
| RBT18570 | Reaction Adapter Mast Nut | 1 | |
| RBW0805G00332-3G | Jacking Bracket, Helicopter Weighing | 2 | |
| RBW0805G00332-3G-A | Jacking Bracket, Helicopter Weighing | 2 | |
| RBW1691A0000-01 | Main Landing Gear Jacking Adaptor | 2 | |
| RBWG1019-SA11 | ADAPTER, JACKING ASSY | 2 | |
| REED R5210 | RECEPTACLE TESTER | 1 | |
| REV TACH | OPTICAL TACHOMETER | 1 | |
| RF170164 | FUEL RECEPTACLE (FUEL DRAIN) | 1 | |
| RFA-8332 | COAXIAL ADAPTER - REVERSED POLARITY BNC MALE (PLUG) TO BNC FEMALE (JACK) (COM-16617) | 1 | |
| RMB-83-SSV | LIQUID FLOWMETER, SS VALVE, 1 TO 20 GPH/0.065 TO 1.25 LPM, 100 PSI, 3 % ACCURACY, 1/4" FNPT | 1 | |
| RMB-83D-SSV | LIQUID FLOWMETER, SS VALVE, 1 TO 20 GPH/0.065 TO 1.25 LPM, 100 PSI, 3 % ACCURACY, 1/4" FNPT | 1 | |
| ROCAGE15011 | Adaptor - ACM torque check | 1 | |
| RPM3000MCMON | RPM3000MCMON;MACTRAK PERFORMANCE MONITORING OPTION NEW | 1 | |
| RPM3000MCMON-UPG | RPM3000MCMON-UPG;RPM3000 MACTRAK PERFORMANCE MONITORING OPTION FIELD UPGRADE | 1 | |
| RRT026797 | EXTRACTOR ADAPTOR | 1 | |
| RRT042370 | SLIDE HAMMER IMPACT EXTRACTOR ADAPTOR | 1 | |
| RRT050771 | Extractor adaptor | 1 | |
| RRT053067 | EXTRACTION ADAPTOR - EXTRACT STG 4 HP DISC | 1 | |
| RRT060464 | Extractor adaptor | 1 | |
| RRT063357 | LONG REACH JACK ADAPTOR PLATE | 1 | |
| RRT063357-1 | LONG REACH JACK ADAPTOR PLATE | 2 | |
| RRT065693 | LONG REACH JACK ADAPTOR PLATE | 3 | |
| RRT070561 | Adaptor spacer | 1 | |
| RRT087093 | Extractor adaptor | 1 | |
| RRT087442-2 | ADAPTER KIT - P30 MANIFOLD DRYING(VACUUM GAGE) | 2 | |
| RRT091296 | IPT MINI DISC EXTRACTOR | 1 | |
| RRT098293 | EXTRACTOR (HPT ASSY) | 1 | |
| RRT099367-2 | Extraction adaptor | 1 | |
| RRT108712 | Extraction adaptor | 1 | |
| RRT117652-1 | Install/extract adaptor | 1 | |
| RRT125966 | Extractor adaptor | 1 | |
| RS0212-1 | Reference Standard, Inconel 718, Surface Notches, .012, .020" Depth | 1 | |
| RS05123-7075T6 | Surface Std, Based on 126 from Boeing NDT PT6 51-00-00 FIG23 | 1 | |
| RS0609A1A1A01 | HELICOPTER JACK | 2 | |
| RS0824-2024T3-BA | Surface Standard, .008"-.020"-.040" deep notches, 2024-T3, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-301-1/2H-BA | Surface Standard, .008, .020 and .040 notches, 301 1/2H sur cond 2D per MIL-S-5059, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-316 | SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, 0.020 AND 0.040 INCHES, BLOCK OVERALL DIMENSIONS 1 X 4 0.25 INCHES. | 1 | |
| RS0824-7075T6-BA | Surface Standard, .008"-.020"-.040" deep notches, 7075-T6, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-I718-BA | Surface Standard, .008"-.020"-.040" deep notches, Inconel 718, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RS0824-T6AL4V-BA | Surface Standard, .008"-.020"-.040" deep notches, 6AL4V Titanium, per Bombardier/Canadair 51-20-06 PT1 PG7 FIG5 | 1 | |
| RSE 6403 | NACELLE INLET LIFTING ADAPTER | 8 | |
| RSE1001-1 | ACCESSORY HOIST (OPTIONAL TO RSE1110) | 1 | |
| RTA075010 | JACK ADPT RH TOOL | 1 | |
| S-90/225 | PINACHO ML 250 X 1500 LATHE - PPTO 2084 | 1 | |
| S-O-M-AC-0646-SD | FWD jack adapter | 1 | |
| S.232B | FACOM 1/2'' to 3/4'' Square Drive Adaptor Coupler | 2 | |
| S3126 | S3126;MTP Adapter / black / full flange / with one dust plug | 1 | |
| S3275E204 | RECEPTACLE | 1 | |
| S387IDG | CFM56-5 IDG JACK ADPT | 3 | |
| S48-22 | Tennsmith® Bench Brakes (Capacity: 16 ga.) (Maximum bend length: 48-1/4") (Maximum box depth: -) (Minimum reverse bend: 1/4") (Shipping weight: 460 lbs (209 kgs)) (Add to cart: Add To Cart) (Capacity: 12 ga.) (Maximum bend length: 48-1/4") (Maximum box de | 2 | |
| S6197 | 1/2 DR 12PT 1/2IN IMPACT SKT | 1 | |
| S6199 | 3/4 DR 1-1/8 6PT IMPACT SKT | 1 | |
| S6260 | 1/2IN DR 12PT IMPACT SKT 1/2IN | 1 | |
| S6412 | 1/2IN DR 12PT 3/8 IMPACT SKT | 1 | |
| S6413 | 1/2IN DR 12PT 13MM IMPACT SKT | 1 | |
| S76-612 | Air Data Accessories kit for S-76 Helicopter | 3 | |
| SA-2000 | DUAL AIRLINE BACK-MOUNTED ADAPTER KIT | 4 | |
| SA010191 | EXTRACTION ADAPTER | 1 | |
| SA010338 | TORQUE SPANNER ADAPTER TO REMOVE AND INSTALL TETRACTION PIN | 1 | |
| SA070810 | AC ADAPTER CORD FOR CUI P/N DMS090110X-P5-ET I.T.E POWER SUPPLY, 5 FEET, WITH LED INDICATOR, REPLACEMENT | 1 | |
| SBA320-57-1053-4 | FLAPTRACK AFTATT SPIGOT NUT SPANNER | 1 | |
| SBA320-57-1083 | REM FLAPTRACK SPIGOT TOOL | 1 | |
| SBE2155-A01 | ADAPTOR TO BLEED COMPONENT STANDARD BIP DE-ACTIVATION SCREW LENGTH: 70CM/25.5470” | 1 | |
| SBE2155-A02 | ADAPTOR TO BLEED COMPONENT STANDARD EM/NEW BLEED DE-ACTIVATION SCREW LENGTH: 70CM/25.5470” | 1 | |
| SC4800-1G-10GE | SC4800-1G-10GE;SmartClass 4800 1G 10G Ethernet Package includes optic | 1 | |
| SC4800-1G-10GE-NOPT | SC4800-1G-10GE-NOPT;SmartClass 4800 1G 10G Ethernet Package | 1 | |
| SC4800-1G-10GE-T1E1 | SC4800-1G-10GE-T1E1;SmartClass 4800 1G 10G Ethernet and T1/E1 Package includes optic | 1 | |
| SC4800-1G-10GE-T1E1-NOPT | SC4800-1G-10GE-T1E1-NOPT;SmartClass 4800 1G 10G Ethernet and T1/E1 Package | 1 | |
| SC4800-GIGE | SC4800-GIGE;SmartClass 4800 Gigabit Ethernet Package includes optic | 1 | |
| SC4800-GIGE-NOPT | SC4800-GIGE-NOPT;SmartClass 4800 Gigabit Ethernet Package | 1 | |
| SC4800-GIGE-T1/E1 | SC4800-GIGE-T1/E1;SmartClass 4800 Gigabit Ethernet and T1/E1 Package includes optic | 1 | |
| SC4800-GIGE-T1/E1-NOPT | SC4800-GIGE-T1/E1-NOPT;SmartClass 4800 Gigabit Ethernet and T1/E1 Package | 1 | |
| SC80600 | 6 PIECE IMPACT ADAPTOR SET | 1 | |
| SC81438I | ADAPTOR, SIZE ¼”X3/8” | 1 | |
| SC83812I | ADAPTOR, SIZE 3/8”X½” | 1 | |
| SCA-C24002-78 | JACK ADAPTER VSCF AND IDG | 1 | |
| SCA-Q400 | JACK ADAPTOR | 2 | |
| SD12540-1 | WRENCH- TORQUE ADAPTOR, PROP BOLTS (USED WITH RETRACTION CLAMP SD12559-1) | 1 | |
| SD5506 | AIRCRAFT NOSE JACKING ADAPTER | 1 | |
| SD5506-1 | ADAPTOR-NOSE JACKING | 1 | |
| SD5506-1-TBAL | JACK ADAPTOR | 1 | |
| SD5506–1 | JACK ADAPTOR | 1 | |
| SE-402-AC3 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 2 | |
| SE27-0001 | ADAPTOR SET - PROTRACTOR,T/LEVER | 21 | |
| SE27-6002 | ADAPTER -0 SPOILER ACTUATOR CYLINDER TO REMOVE | 1 | |
| SETS#10-24X3/8-SBO3AFP | SET SCREW #10-24 X 3/8 STEEL BLACK OXIDE FLAT PT | 1 | |
| SLR4S1E110 | PIN-RECEPTACLE, QUICK RELEASE | 3 | |
| SLS-500-PL | TRUCK - LAVATORY SERVICE - CAPACITY 550 GALLON WASTE - 300 GALLON WATER/CHARGE - STATIONARY PLATFORM ON TANK - HYDRAULIC LIFT OPTIONAL - HOSE WITH REEL & COUPLING - MOUNTED ON A TWO TON TRUCK | 1 | |
| SMI36-24-V-P5 | AC ADAPTOR | 1 | |
| SOLFRUNT1403 | PANEL MOUNTED PRESSURE GAUGE (0-160 PSI) 41/2" DIAMETER, 1/4" NPT, LOW BACK MOUNTED | 1 | |
| SPECTROLNF-Q210 | INCLUDING LNF Q210 OPTICAL PARTICAL, SOFTWARE, USER MANUAL CONNECTION CABLES AND POWER CORD, REQUIRES SA1015 STANDARD ACCESSORY KITS | 1 | |
| SPL-10805 | PROTECTIVE RING - WING, LOWER PANEL ACCESS DOOR (OPTIONAL GSE) | 1 | |
| SPL-10873 | ADAPTER EQPT - HEAT EXHANGER / PLENUM, R&I, AC PACK | 1 | |
| SPL-10895 | ADAPTER - TRAINING EDGE FLAP ACTATOR R/I | 1 | |
| SPL-1494 | ADAPTER ASSEMBLY, WING JACKING | 1 | |
| SPL-1496 | ADAPTER - JACK, FORW | 1 | |
| SPL-1558 | LEVERAGE ADAPTER, ACCESS PANEL | 1 | |
| SPL-1634 | JACK ADAPTOR VSCF AND IDG | 1 | |
| SPL-20727 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 1 | |
| SPL-2419 | IDG JACK AND ADAPTOR ASSY | 1 | |
| SPL-3997 | DRIVE ADAPTER EQUIPMENT, HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| SPL-5064 | ADAPTER - PROTRACTOR | 1 | |
| SPS-5 | OPTICAL TACHOMETER PICK UP | 1 | |
| SPT-TF-901-60 | SPTech surface probe, triax connector, 90%, .010" Drop, 50-500KHz | 1 | |
| SPT-TF-9025-60B | SPTech surface probe, triax connector, 90%, .250 drop, 6" long, bend | 1 | |
| SRES18 | WRENCH- TORQUE ADAPTOR, PROP BOLTS (USED WITH RETRACTION CLAMP SD12559-1) | 4 | |
| SRS-0824M- AZ31B | SURFACE REFERENCE STANDARD, MAGNESIUM AZ91E, WITH EDM NOTCH DEPTHS OF 0.008", 0.020" AND 0.040" INCH | 1 | |
| SRS-0824S-4130 | SURFACE REFERENCE STANDARD WITH CERTIFICATE, STEEL (4130) WITH EDM NOTCH DEPTHS OF 0.008, 0.020 AND 0.040 INCHES. BLOCK OVERALL DIMENSIONS 1 X 4 X 0.25 INCHES . | 1 | |
| SRS-0824SS-316 | SURFACE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST. STAINLESS STEEL (316) WITH EDM NOTCH DEPTHS OF 0.008, | 1 | |
| SRSM-51020S/WLD | urface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm1 (0.2mm, 0.51mm and 1.02mm), Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includes Test Report a | 1 | |
| SSK701 | CL604 STBY PITOT ADAPTER SEAL SPACER KIT | 1 | |
| ST-101B | RECEPTACLE TESTER | 1 | |
| ST-7466 | ACCEPTANCE TEST RIG (3IT) | 1 | |
| ST-93-3 | SPACER CONTROL DEPTH | 1 | |
| ST-93-5 | SPACER CONTROL DEPTH | 1 | |
| ST-93.3 | SPACER, CONTROL DEPTH BUSHING 0.370 THICK | 1 | |
| ST-93.5 | SPACER, CONTROL DEPTH BUSHING 0.440 THICK | 1 | |
| ST2580-243 | TORQUE WRENCH ADAPTER - BOX TYPE, 3.37 NOMINAL ACROSS FLATS | 3 | |
| ST2580-263 | TORQUE WRENCH ADAPTER - WALKING BEAM ASSEMBLY - NUT SPACER | 8 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 15 | |
| ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-10 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-10-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-10-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-12-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-14-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-16-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-18-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-19-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-20-3-5-F | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-201-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-21-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-210-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-22-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-228-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-24-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-24-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-4-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-242-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-245-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-29-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-36-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-40-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-48-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-60-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-XX-X-X | SPANNER WRENCH ADAPTER FOR BACN10RF NUTS. (ST2580-267 DRAWING) | 1 | |
| ST2580-302 | WRENCH RECEPTACLE O WING FUEL | 12 | |
| ST4130 | BOMBARDIER / CANADAIR EDDY CURRENT SURFACE REFERENCE STANDARD PART 6 55-20-001, NOTCHES .008", .020", .040" (.005" Wide +000 / - .002 and +/- .001" Depth), MATERIAL: 4130 STEEL. Includes certification Report and Certificate of Conformance(COC)... | 1 | |
| ST895A-3 | PROBE - RESISTIVITY MEASUREMENT, SURFACE NOTE: OPTIONAL TOOL / LOW USE TOOL - ONLY USE FOR OPTIONAL ST895A-3 TEST METHOD WHICH IS NOT CURRENTLY USED IN 737NG AMM -51-21- 71 - SEE REFERENCED BAC5639 PSD 6-14, PAGES 11 - 13 | 6 | |
| ST90838 | Adapter, Assembly Interface Device | 2 | |
| STANDARD-B | 2/64" FLAT BOTTOM HOLE EQUIVALENT SURFACE NOTCH STANDARD (*ABOVE DESCRIPTION MUST BE ENGRAVED ON THE REFERENCE STANDARD) ..DRAWING "B" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) MATERIAL=7075-T6 | 1 | |
| STC90572-1 | KIT ADAPTER JACK WIN | 1 | |
| STD-1318 | HOSE - VACUUM, 1/4 INCH INSIDE DIAMETER (ID) PLASTIC TUBE (TYGON-B44-30PT, UNIFLEX 650SIMILAR) | 1 | |
| SUITEARDAC1 | ARDAC laptop | 1 | |
| SUT070001-003 | JACK ADAPTER SET | 1 | |
| SW 67 | RACHET ADAPTER | 1 | |
| SWE 19403 | #1 BRG OUTER RACE ADAPTER | 2 | |
| SWE 67 | RACHET ADOPTER | 1 | |
| SWE 67B | RACHET ADAPTER | 3 | |
| SWE67 | RACHET ADAPTER | 1 | |
| Silverwing Scorpion - Ultrasonic Crawler | Silverwing Scorpion - Ultrasonic Crawler - Ultrasonic scanner, Full A-scan capture, Cost effective - removes need for scaffolding or rope access | 1 | |
| T-1100 | BAC EXTENDER ADAPTER, FOR UNIVERSAL TOW BARS | 3 | |
| T-474489-1-8 | WELD-MACHINING TOOL, TCPT | 1 | |
| T-474530-1-8 | WELD-MACHINING TOOL, TCPT | 1 | |
| T-474566-1-8 | WELD-MACHINING TOOL, TCPT | 1 | |
| T-475069-1-8 | WELD-MACHINING TOOL, TCPT | 1 | |
| T-475070-1-8 | WELD-MACHINING TOOL, TCPT | 1 | |
| T.646051 | ADAPTER HYDRACLAMP | 1 | |
| T07284 | ADAPTER, VACUUM 64886-103 | 1 | |
| T10268 | Actuator Test Adaptor | 1 | |
| T10268-001 | Actuator test adaptor | 1 | |
| T103012-3 | ADAPTOR XMSN AC | 1 | |
| T103216-101 | INPUT ADAPTER SPANNER BACKLASH BAR (SPANNER ASSEMBLY) | 1 | |
| T1100 | BAC Extender Adapter, For Universal Tow Bars | 3 | |
| T1203-00 | ADAPTER-INTERFACE | 1 | |
| T1203-01 | ADAPTER-INTERFACE | 1 | |
| T1203-03 | ADAPTER-INTERFACE | 1 | |
| T1375 | BAC Universal Tow Bar Adapter | 2 | |
| T158093-001 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 1 | |
| T260 | BAC Universal Tow Bar Adapter | 2 | |
| T349 | BAC Universal Tow Bar Adapter | 3 | |
| T40115FN | 4.0MM FORWARD VIEWING INTERCHANGEABLE OPTICAL TIP COLOR: BLACK FOV: 115 DEGREES DOF: 4MM TO INF. (0.16" TO INF.) DOV: 0 DEGREES | 3 | |
| T451 | BAC Universal Tow Bar Adapter | 3 | |
| T451A | BAC Towbar Adapter, 0.451 in OD Dia, For Universal Tow Bars | 2 | |
| T5-8005-110-00 | Pacific Scientific / Optimanufacturing Cable Tensiometer | 15 | |
| T515 | BAC Universal Tow Bar Adapter | 2 | |
| T60 1001-C9-1A | TENSIOMETER - CABLE RANGE - 150-450 LBS FOR 1/8, 5/32, 3/16, 7/32 & 1/4 CABLES (OPTI MANUFACTURING CORPORATION) | 11 | |
| T60-1001-C8-1A | TENSIOMETER - CABLE RANGE - 10-200LBS FOR 1/16 3/32 1/8 CABLES, 30-200LBS FOR 5/32 & 3/16 CABLES, AND 80-200LBS FOR 7/32 (OPTI MANUFACTURING CORPORATION) | 27 | |
| T625 | BAC Universal Tow Bar Adapter | 2 | |
| T625A | BAC Towbar Adapter, 5/8 in OD Dia, For Universal Tow Bars | 2 | |
| T72340179 | HPT RACE INSTALL STAND | 1 | |
| T750 | BAC Universal Tow Bar Adapter | 2 | |
| T7929920100000100H | JACK ADAPTER (WING RIGHT) | 1 | |
| T792992010000100H | JACK ADAPTOR | 1 | |
| T7929920210000200H | JACK ADAPTER (WING LEFT) | 1 | |
| T792992040000000B | JACK ADAPTOR | 1 | |
| T792992040000000C | JACK ADAPTER | 1 | |
| T795 | BAC Universal Tow Bar Adapter | 2 | |
| T7K220082D166 | GAUGE GAUGE, PYLON ACCEPTANCE | 1 | |
| T820 | BAC Universal Tow Bar Adapter | 4 | |
| T875-3 | ACCEPTANCE TEST SET | 1 | |
| T92165 | A300- JACK ADAPTERS | 1 | |
| TB58-VW-1-10PTP-U1 | TB58-VW-1-10PTP-U1;VZW 5G Timing Package includes 1GE 10GE PTP 1 PPS Analysis | 1 | |
| TB58-VW-1-25PTP-U1 | TB58-VW-1-25PTP-U1;VZW 5G Timing Package includes 1GE 10GE 25GE PTP 1 PPS Analysis | 1 | |
| TB5800-100GE-NOPT | TB5800-100GE-NOPT;TB 5800-100G Base 100GE package no optics | 1 | |
| TB5800-100GE-NOPT-NOG | TB5800-100GE-NOPT-NOG;TB5800-100G with 100GE without optics wifi BT or GNSS not a TAA package | 1 | |
| TB5800-CPRI-MAOTDR | TB5800-CPRI-MAOTDR;TB5800 CPRI Options 1-8 - Metro Access OTDR / MP60A / P5000i no optics Inc | 1 | |
| TB5800-CPRI-MAOTDRC | TB5800-CPRI-MAOTDRC;TB5800 CPRI Options 1-8 - Metro Access OTDR / MP60A / P5000i no optics Inc | 1 | |
| TB5800-CPRI-QUADC | TB5800-CPRI-QUADC;TB5800 CPRI options 1-8 Package with Quad OTDR P5000i MP-60 and FFL-050 | 1 | |
| TBDC-ALL-AOCDAC | TBDC-ALL-AOCDAC;T-BERD All Rates Data Center Optical or Copper Cable Testing | 1 | |
| TBS004 | PTI HOLDING FIXTURE SERVO ACTUATOR | 1 | |
| TC-50 | TRACTOR - CARGO - 6,000 LB DRAW BAR PULL - DUAL REAR WHEELS - GASOLINE ENGINE (DIESEL OR LPG ENGINE OPTIONAL) | 1 | |
| TC-60 | TRACTOR - BAGGAGE TRACTOR - 6,000 LB DRAW BAR PULL - DUAL REAR WHEELS - GASOLINE ENGINE (DIESEL OR LPG ENGINE OPTIONAL) | 1 | |
| TCRM-K | TCRM-K;19 in. 1U Rack Mount Panel for up to 3 Copper or Optical nTAPs | 1 | |
| TE65B00731 | ADAPTER - THRUST REVERSER ACTUATOR, SHOP AIR | 1 | |
| TEE74 | ACTIVE AIDS ADAPTER JT9D-7R4 | 1 | |
| TEK-2000 | Special Surface Probe, -3 PER 747, 53-30-18, PT6, Pg2, 25-100KHz, .2 drop | 1 | |
| TEK-2000-1 | Special Surface Probe, -3 PER 747, 53-30-18, PT6, Pg2, 25-100KHz, .5 drop | 1 | |
| TEK-2000-2 | Special Surface Probe, -3 PER 747, 53-30-18, PT6, Pg2, 25-100KHz, .75 drop | 1 | |
| TEK-2000-3 | Special Surface Probe, -3 PER 747, 53-50-18, PT6, Pg2 | 1 | |
| TEK-2000/100-500K | SPECIAL SURFACE PROBE, -3 PER 747 PT6 53-30-18 PG2, 737 PT6 53-30-22 PG1, 100-500KHZ, .2 DROP | 1 | |
| TEK-2220 | Edge Surface probe 2MHz differential. Canadair 53-41-132 PT6 fig 7 | 1 | |
| TEK-3008R | Special Rotary Surface Probe, RA19/RA2000 Scanners, for 747 PT6 53-30-20 | 1 | |
| TEK-3008U | Special Rotary Surface Probe, Fischer 4-pin Scanners, for 747 PT6 53-30-20 | 1 | |
| TEK-4046 | ABSOLUTE PROBE, REFLECTION TYPE WITH FERRITE CORE, SHIELDED, 500HZ-250KHZ, 4S-FISCHER RECEPTACLE; 25 | 2 | |
| TEK-6803-1 | BOEING 767 PT4 51-00-04 I/B AFT FLAP, 2024T3 .032" inner surface, 1 ply middle, 2 plies outer, BMS 8-219 Style 285 & BMS 4-4 Type 3-10N Form A | 1 | |
| TEST03 | 25 CAPTY GERIN TURBOLUBE ACIDITY SET | 1 | |
| THDOC24 | THDOC24;High-Density Optical TAP Chassis-Up to 24 HDO Modules-1U Rack Mount | 1 | |
| THY10 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY101 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY15 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY20 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY22 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY25 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY30 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY35 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY40 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY50 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 1 | |
| THY60 | Stainless Steel Hand Rivet Squeezers (Description: Tool Only) (Reach: 1") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 1-1/4") (Add to cart: Add To Cart) (Description: Tool Only) (Reach: 2") (Gap: 2") (Add to cart: A | 2 | |
| TK1518 | SERVICE JACK ADAPTER | 1 | |
| TK1814-952-3 | FITTING NOSE JACK ADAPTER | 1 | |
| TK1814/952-3 | NOSE LANDING JACK ADAPTER | 1 | |
| TK1814/952-3ASYB | FITTING-NOSE JACK ADPTR-ASSY B | 1 | |
| TM0067G001 | RIGID BOROSCOPIC DIA. 5 WITH RECEPTACLE | 3 | |
| TM405555FG | STEREO MEAS. TIP ADAPTER (BLACK) | 2 | |
| TMAULE | BAC Tail Spring Adapter, For Universal Tow Bars | 2 | |
| TMH MA01-00-00 | ADAPTER MLG JACK | 1 | |
| TMH MA02 | Jack Adapter MLG - 13.2 Ton | 2 | |
| TMH MA02-00-00 | MLG JACK ADAPTER | 8 | |
| TMH MA03 | Jack Adapter MLG - 27 Ton | 1 | |
| TMH NA01 | Jack Adapter NLG - 2.2 Ton | 2 | |
| TMH NA01-00-00 | NLG JACK ADAPTER | 9 | |
| TMH NA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
| TMH NA10 | Jack Adapter NLG - 5.5 Ton | 1 | |
| TMH-MA02-00-00 | MLG JACK ADAPTER | 8 | |
| TMH-NA01 | NLG JACK ADAPTER | 2 | |
| TMH-NA01-00-00 | NLG Jack Adapter | 9 | |
| TMHCP13 | AXLE JACK (WITH NA01 ADOPTER) | 1 | |
| TMHCP13-00-00 | AXLE JACK (WITH NA01 ADOPTER) | 7 | |
| TMHMA01-00-00 | ADAPTER MLG JACK | 1 | |
| TMHMA010000 | ATR72 AXLE MLG JACK ADAPTOR | 1 | |
| TMHMA02 | ADAPTER MLG JACK | 2 | |
| TMHMA02-00-00 | MLG Jack Adapter | 8 | |
| TMHMA02-00-00-REVC | MLG JACK ADAPTER (EQ. TO D23205000) | 1 | |
| TMHMA020000 | ADAPTER-MLG JACK | 8 | |
| TMHNA 01-00-00 | NLG JACK ADAPTER | 9 | |
| TMHNA01 | NLG JACK ADAPTER | 2 | |
| TMHNA01-00-00 | NLG Jack Adapter | 9 | |
| TMHNA01-00-00-5J | ADAPTER-NLG JACK | 1 | |
| TMHNA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
| TMHNA01-00-00/200951A | NLG JACK ADOPTER | 1 | |
| TMHNA01-00-00/D2282700 | NLG JACK ADAPTER ATR | 1 | |
| TMHNA010000 | NLG JACK ADAPTER | 9 | |
| TN182 | BAC Extender Adapter, For Universal Tow Bars | 2 | |
| TN455044-8 | JACK ADAPTER, ENGINE BEAM | 1 | |
| TN6224410 | JACK ADAPTER | 1 | |
| TO5621 | VACUUM ADAPTER | 1 | |
| TP228 | BAC Towbar Adapter, For Universal Tow Bars | 2 | |
| TPS-AI-H0-S | INTERFACE ADAPTER KIT | 1 | |
| TPT00291 | ACTUATOR LEAKAGE TOOL (USED WITH ACTUATOR LEAKAGE TOOL, TPT00244) | 1 | |
| TRI-ACCY-RF-PUSH-ON | TRI-ACCY-RF-PUSH-ON;F Style Push On Adapters | 1 | |
| TRI-ACCY-USBPWR-AUS-PLUG | TRI-ACCY-USBPWR-AUS-PLUG;Australian Power Adapter for USB Charger | 1 | |
| TRI-ACCY-USBPWR-VEH | TRI-ACCY-USBPWR-VEH;Vehicle Power Adapter without USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-VEH-WCBL | TRI-ACCY-USBPWR-VEH-WCBL;Vehicle Power Adapter with USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-WCBL | TRI-ACCY-USBPWR-WCBL;AC/DC Power Adapter - Battery Charger w/ USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-WOCBL | TRI-ACCY-USBPWR-WOCBL;AC/DC USB Power Adapter - Battery Charger w/o USB Power/Data Cable | 1 | |
| TRI-DSP-NEW-PWR-ADPT | TRI-DSP-NEW-PWR-ADPT;AC/DC Power Adapter - Battery Charger w/ US Power Cable for New DSP Family | 1 | |
| TRI-DSP-PWR-ADPT-NEW | TRI-DSP-PWR-ADPT-NEW;AC/DC Power Adapter - Battery Charger w/o Power Cable for New DSP Family | 1 | |
| TRI-DSP-SW-FAS | TRI-DSP-SW-FAS;Forward Active Sweep /FAS/ Option for New DSP Family | 1 | |
| TRI-HD-302R-G | 3 IN ROUND BOILER GAUGE WITH 1/2 IN MNPT CENTER BACK CONNECTION, 0 TO 200 PSI | 1 | |
| TRI-LKG-BNC-TO-F-ADAPTER | TRI-LKG-BNC-TO-F-ADAPTER;Adapter BNC Jack to F connector plug | 1 | |
| TRI-LKG-PWR-ADPT-TX | TRI-LKG-PWR-ADPT-TX;AC/DC Power Adapter - Battery Charger for Seeker HL Source Transmitter | 1 | |
| TRIPOD JACK ADAPT | JACKING ADAPTOR TOOL | 1 | |
| TS1176-11 | TORQUE WRENCH ADAPTER UPR AND LWR AFT ATTACH POINT | 2 | |
| TS1176-6 | TORQUE WRENCH ADAPTER UPR FWD WING ATTACH POINT | 2 | |
| TS120R121A | NACA VENT DRAIN ADAPTER | 1 | |
| TS120R122A | NACA VENT DRAIN ADAPTER (RIGHT) | 1 | |
| TT-BASIC-SP | TT-BASIC-SP;Self-paced Course 24 minute max in length - use when no other SPT available | 1 | |
| TT-DETAILED-SP | TT-DETAILED-SP;For Self-paced Courses over 24 min and no other SPT avail to quote per user | 1 | |
| TT-TB4000-USER-SP | TT-TB4000-USER-SP;Self-Paced - TB4000 UserBasics; Settings; RC; Adptr; Batt; Module - 24 mins | 1 | |
| TWA10 | BAC Universal Tow Bar Adapter | 2 | |
| TWA11 | BAC Universal Tow Bar Adapter | 2 | |
| TY-CON1 | TOWBAR ATTACHMENT HEAD (OPTIONAL) | 2 | |
| U.53H3 | FACAOM EXPANSION PULLER ADAPTOR | 1 | |
| U01A070000 | JACK ADAPTER NLG | 1 | |
| U01A070000D | NLG JACK ADAPTER DO 228 | 1 | |
| U02A070000 | JACK ADOPTER MLG | 1 | |
| U02A070000D | MLG JACK ADAPTER DO228 | 1 | |
| U20A070000C | MAIN WHEEL JACKING ADAPTOR | 1 | |
| U21842000 | DESCRIPTION: EXTRACTOR | 10 | |
| U48-22 | Tennsmith® Bench Brakes (Capacity: 16 ga.) (Maximum bend length: 48-1/4") (Maximum box depth: -) (Minimum reverse bend: 1/4") (Shipping weight: 460 lbs (209 kgs)) (Add to cart: Add To Cart) (Capacity: 12 ga.) (Maximum bend length: 48-1/4") (Maximum box de | 1 | |
| U8780329 | OMNI-A-ADP27 Scanner interface adaptor | 2 | |
| UARRSI RECEPTACLE | UARRSI RECEPTACLE R/I SLING, P/N 4013-1, NSN 1730- | 1 | |
| UFEDIIB-SCRIPT-PACK-1 | UFEDIIB-SCRIPT-PACK-1;Programmed Ultra FEDIIb SW and Manuals USB Memory Stick | 1 | |
| UL-32200-CS | DRAG BRACE ADAPTER | 1 | |
| UNGMUQDD | VACUUM SELF SEALING ADAPTER | 1 | |
| UPG-ONX-CATV-SW-RSGLOOP | UPG-ONX-CATV-SW-RSGLOOP;Upgrade/ software/ OneExpert CATV/ Add Return Sig Gen w/Loopback opt via SS | 1 | |
| UPG-ONX-CATV-SW-SAA | UPG-ONX-CATV-SW-SAA;Field Upgrade via SS -OneExpert CATV SmartAccess Anywhere Upgrade Option | 1 | |
| UPG-ONX-DSP-SW-BASE-PLUS | UPG-ONX-DSP-SW-BASE-PLUS;Field Upgrade via SS - ONX-DSP - Base to Plus Package Software Option | 1 | |
| UPG-ONX-DSP-SW-PLUS-PRO | UPG-ONX-DSP-SW-PLUS-PRO;Field Upgrade via SS - ONX-DSP - Plus to Pro Package Software Option | 1 | |
| UPG-ONX-DSP-SW-SAA | UPG-ONX-DSP-SW-SAA;Field Upgrade via SS - ONX-DSP - Smart Access Anywhere Software Option | 1 | |
| URL-200 | WING COVERS, inboard section (for detachable wing tip options) (set of 2) | 1 | |
| UT1593 | AC POWER ADAPTER | 1 | |
| V760101 | INTERFEROMETER FLATNESS ACCURACY: 1 ΜIN. DAVIDSON OPTRONICS INC.MODEL D327-100 | 1 | |
| VAD-PS-BM | POINTSOURCE OPTIONAL BATTERY PACK | 1 | |
| VQTC381-048 | BRACKET,LIFT & TURN PT THRU- | 1 | |
| VSE-1100-REPL-12VDC-SUP | VSE-1100-REPL-12VDC-SUP;VSE-1100 Replacement 12VDC Auto Adapter | 1 | |
| VSE-1100-REPL-BATT | VSE-1100-REPL-BATT;OPT VSE-1100 Replacement Battery | 1 | |
| WASATN-B005 | ADAPTER,WRNCHSTEERACTU.TRUNNUT | 1 | |
| WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
| WSPL 2 | JACKING ADAPTER COLUMBUS | 1 | |
| WSPL 3 | ATR JACKING ADAPTER HYDRO MODEL 1708B2D1801BO | 1 | |
| X2403.37.1000.00B(x2) | EUROCOPTER NH-90 Tail Jack | 1 | |
| X500G2 | GETAC LAPTOP | 1 | |
| XL4TM61105FG | 3D PHASE MEAS. TIP ADAPTER (BLACK) INCL. CALIBRATION | 5 | |
| XLG3TM616060FG | STEREO MEAS. TIM ADAPTER (BLACK) INCL. CALIBRATION | 3 | |
| XPT-DAA-ARRIS | XPT-DAA-ARRIS;XPERTrak software for ARRIS Distributed Access Architecture | 1 | |
| XPT-DAA-BKTEL | XPT-DAA-BKTEL;XPERTrak software for BKTEL Distributed Access Architecture | 1 | |
| XPT-DAA-CASA | XPT-DAA-CASA;XPERTrak software for CASA Distributed Access Architecture | 1 | |
| XPT-DAA-CISCO | XPT-DAA-CISCO;XPERTrak software for CISCO Distributed Access Architecture | 1 | |
| XPT-DAA-COMMSCOPE | XPT-DAA-COMMSCOPE;XPERTrak software for CommScope Distributed Access Architecture | 1 | |
| XPT-DAA-DELTA | XPT-DAA-DELTA;XPERTrak software for DELTA Distributed Access Architecture | 1 | |
| XPT-DAA-HARMONIC | XPT-DAA-HARMONIC;XPERTrak software for Harmonic Distributed Access Architecture | 1 | |
| XPT-DAA-NOKIA | XPT-DAA-NOKIA;XPERTrak software for Nokia Distributed Access Architecture | 1 | |
| XPT-DAA-TELESTE | XPT-DAA-TELESTE;XPERTrak software for Teleste Distributed Access Architecture | 1 | |
| XPT-DAA-VECIMA | XPT-DAA-VECIMA;XPERTrak software for Vecima Distributed Access Architecture | 1 | |
| XPT-MAPS-AUTOCAD | XPT-MAPS-AUTOCAD;XPERTrak Autocad interface - requires custom services | 1 | |
| XPT-NITRO-CONNECTOR-AL | XPT-NITRO-CONNECTOR-AL;Annual offering for NITRO Connector-Sold in quantities of 1k modems each | 1 | |
| XPT-PON-CALIX-GPON | XPT-PON-CALIX-GPON;DRIVER SUPPORTING CALIX GPON OLT INTERFACE | 1 | |
| XPT-PON-CALIX-XGSPON | XPT-PON-CALIX-XGSPON;DRIVER SUPPORTING CALIX XGSPON OLT INTERFACE | 1 | |
| XPT-PON-HUAWEI-GPON | XPT-PON-HUAWEI-GPON;Driver supporting Huawei GPON OLT interface | 1 | |
| XPT-PON-HUAWEI-XGSPON | XPT-PON-HUAWEI-XGSPON;Driver supporting Huawei XGSPON OLT interface | 1 | |
| XPT-PON-NOKIA-GPON | XPT-PON-NOKIA-GPON;Driver supporting Nokia GPON OLT interface | 1 | |
| XPT-PON-NOKIA-XGSPON | XPT-PON-NOKIA-XGSPON;Driver supporting Nokia XGSPON OLT interface | 1 | |
| XPT-RPHY-ARRIS | XPT-RPHY-ARRIS;XPERTrak support for ARRIS CCAP and Rphy interface | 1 | |
| XPT-RPHY-CASA | XPT-RPHY-CASA;XPERTrak support for CASA CCAP and Rphy interface | 1 | |
| XPT-RPHY-CISCO | XPT-RPHY-CISCO;XPERTrak support for CISCO CCAP and Rphy interface | 1 | |
| XPT-RPHY-HARMONIC | XPT-RPHY-HARMONIC;XPERTrak support for Harmonic CCAP and Rphy interface | 1 | |
| XPT-RPHY-NOKIA | XPT-RPHY-NOKIA;XPERTrak support for Nokia CCAP and Rphy interface | 1 | |
| XPWA211341 | Adapter,holding-lpc.#2 bearing outer race nut | 1 | |
| XPWA211732 | Fixture,aligning-engine assy,hpt stack line transfer | 1 | |
| Y3-01-0145 | MANUAL SPT-406 BEACON REMOTE PROGRAMMER | 1 | |
| YA6510-2 | ACURA INTEGRA 1990-93 ADAPTER | 1 | |
| YA6541 | 30MM 12 PT IMPACT SOCKET | 1 | |
| YA727B | IDG JACK AND ADAPTOR ASSY | 2 | |
| YA734A | GUN - GREASE USED WITH FITTING, LUBRICATION-FLUSH TYPE: 1/8"NPT FEMALE, ACCORDING NAS 516-1A | 5 | |
| Z-1694 | WLDMNT, AXLE JACK ADAPTOR | 1 | |
| Z-2639 | Lear Main Gear Axle Jack Adapter | 4 | |
| Z-2641 | Lear Nose Gear Axle Jack Adapter | 2 | |
| Z-3275 | NOSE GEAR JACK ADAPTER | 1 | |
| Z1694 | WLDMNT,AXLE JACK ADAPTER, | 1 | |
| ZBSP50 | Grease Nipple Assortment Pack 50 BSPT | 1 | |
| ZC-M2-B/1-50K | Adaptor, Rohmann M2, Accepts MIZ-20/22 4-pin Cannon Plug, LF Bridge | 1 | |
| ZC-M2-R | Adaptor, Rohmann M2, Accepts MIZ-20/22 4-pin Cannon Plug, Reflection | 1 | |
| f 20284-1 | Wear Gage Set-GrdPwr Plug & Receptacle | 1 | |
| f 70009-1 | Adapter Jack Pad | 1 | |
| f 71138-501 | Adapter Assambly Aircraft Jacking | 1 | |
| f 71139 | Adapter Nose Jack Pad | 9 | |
| f 71292-8 | Adapter Assambly Aircraft Jacking | 1 | |
| f 80000-1 | adapter nose jack pad | 7 | |
| f 80000-6 | adapter assembly aircraft jacking | 1 | |
| f 80000-7 | adapter nose jack pad | 24 | |
| f 80001-1 | Adapter Tail Jack Pad | 22 | |
| f 80009-1 | adapter jack pad | 1 | |
| f 80014-1 | stab jack screw handling equiptment | 1 | |
| f 80014-2 | stab jack screw handling equiiptment | 13 | |
| f 80060-6 | adapter wing jack pad | 25 | |
| f70009-1 | Adapter Jack Pad | 1 | |
| f71139 | Adapter Nose Jack Pad | 9 | |
| f80000-1 | adapter nose jack pad | 7 | |
| f80060-6 | adapter wing jack pad | 25 | |
| lC6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | 1 | |
| 35-92281-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| PWC40562 | BRACKET, ADAPTER, ENGINE SLING | 4 | |
| VL-F3 | RECEPTACLE | 1 | |
| А38001-22 | VACUUM TEST EQPT - VACUUM WASTE SYSTEM | 1 | |
| А38001-68 | VACUUM TEST EQPT - VACUUM WASTE SYSTEM | 1 | |
| А38012-39 | PUMP EQPT - VACUUM LAV SYSTEM | 1 | |
| А38012-40 | PUMP EQPT - VACUUM LAV SYSTEM | 1 | |
| В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | 1 | |
| С21003-133-> С21003-155 | BACKFLUSH EQPT - A/C PACK HEAT EXCHANGER | 1 | |
| С24002-78 | JACK ADAPTER-VSCF& IDG | 1 | |
| Т40115FN | OPTICAL TIP Т40115FN(СОLОR BLACK FОV 115 DOF 4 MM) | 1 | |
| ХLG3ТМ616060 | OPTICAL TIP ХLG3ТМ616060(СО|ОR BLACK FОV 60/60 DOF 4- 80 MM) | 1 | |
| 98A32103003000 | TORQUE ADAPTER,USE TO TORQUE REAR ATTACH | 7 | |
| A27071-96 | INPUT ADAPTER,ASSEMBLY,FOR ROTARY ACTUAT | 1 | |
| C22971 | JACK ADAPTER,USED TO PARTIALLY LIFT THE | 5 | |
| CHA700-224 | ADAPTER,BACKLASH CHECKING,USED TO CHECK | 6 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
