| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PBMP8A | 8 IN MULTI P | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 283 | MULTIMETER - 283 FC/PV ET PINCE AMPÈREMÉTRIQUE SANS FIL | 1 | |
| 2001823 | Gulfstream G2-G650 aircraft towbar. Fits G2, G300-350, G400-450, G5-500/550/650. Includes TB125 multi-head aircraft towbar and G2-650 towbar head (000194 TB125 + 000582 G2-650 towbar head). NOTE: Crating is required for protection of towbars during tra | 1 | |
| 03261408 | 12 POINT INTERNAL MULTI-TOOTH NUT/ SOCKET WRENCH 0.5 INCH M8 WITH LONG BIT | 1 | |
| 03390001 | 3000.1,5X58-1/2" SOCKET, MULTI SPLINE | 1 | |
| 071513808 | 12 POINT INTERNAL MULTI-TOOTH NUT/ SOCKET WRENCH 0.5 INCH M8 WITH SHORT BIT | 1 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 15318-00 | WINGRIP SOLUTIONS 12M MULTI USERS LIFELINE SYSTEM FOR USE ON BOEING B737 FAMILY AND B787 | 2 | |
| 2001040 | mobile 8-head storage system for up to eight AERO or Tronair multi-towbar heads. Heavy duty stainless steel construction. Includes 2 locking and 2 rigid casters. Additional racks may be bolted together for up to 16 heads. | 1 | |
| 30-804-2108 | Sylvac 30-804-2108 M-Bus 8I Inductive Multiplexer Unit | 1 | |
| 30-804-2122 | Sylvac 30-804-2122 M-Bus 2S Heidenhain Multiplexer Unit | 1 | |
| 30-804-2140 | Sylvac 30-804-2140 M-Bus Multiplexer Unit PS Measuring Bench | 1 | |
| 30-804-2180 | Sylvac 30-804-2180 M-Bus Multiplexer Unit BT Bluetooth Instrument | 1 | |
| 3061/93.78 | 3061/93.78;10G OTN Multiplexing Solution | 1 | |
| 3076/63.28 | 3076/63.28;OTN Multiplexing OTU2 for MTM | 1 | |
| 401-245.61 | 401-245.61;OTL4-OTU4-Multi-Channel 80TS - Single Port 1 - quad size VTM | 1 | |
| 62202-9815 | 2-by-8 Stacked Multi-Port Insertion Tool | 1 | |
| 72452 | MULTI-HEAD BUNG WRENCH 385 MM NON SPARKING Cu-Be | 1 | |
| 72453 | MULTI-HEAD BUNG WRENCH 385 MM NON SPARKING Al-Bron | 1 | |
| 99A53003001100 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 6AL-4V TITANIUM. Includes Test Report an Certificate of Conformance. | 4 | |
| 99A53003001101 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report an Certificate of Conformance. | 8 | |
| 99A53003001101/A1 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A1-A6 | 2 | |
| 99A53003001101/A13 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A13-A18 | 1 | |
| 99A53003001101/A7 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A7-A12 | 1 | |
| 99A53003001102 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: STEEL Includes Test Report an Certificate of Conformance. | 5 | |
| 99D51407291001 | AIRBUS CARBON LAMINATE THICKNESS REFERENCE STANDARD SET A318-A321 51-10-06-PB4 Multidirectional Fabric Material, BLOCKS 01-06 includes waterproof case. Nominal Thicknesses of 1mm, 3mm, 5mm, 9mm, 15mm, 19mm. Includes Test Report and Certificate of Con... | 7 | |
| 99D55109001000 | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK SET OF 4 includes waterproof case. NOMINAL THICKNESS (1mm, 3mm, 5mm, 7mm). Includes Test Report and Certificate of Conformance. | 7 | |
| 99D55109001000/1MM | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK NOMINAL THICKNESS (1mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AF-NEC-6112-1/Ti | Custom multi-hole reference standard Material: 6AL-4v Titanium. Hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",11/16" and 3/4". Countersink holes opposite side. Thru hole EDM notches in each hole .005" +/-.001". 3 Surface... | 1 | |
| AFNDT-2125/AL | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate o | 1 | |
| AFNDT-2125/S | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 4130 STEEL. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate of Conf | 1 | |
| AFNDT-2227TI | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110A | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 48 Total Hole Sizes: 33/64, 17/32, 35/64, 9/16, 37/64, 19/32, 39/64, 5/8, 41/64, 21/32,43/64, 11/16. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110C | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 24 Total Hole Sizes: 27/32, 55/64, 7/8, 57/64, 29/32, 59/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3128AL | BOEING ALL AIRCRAFT MODELS 51-00-16 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .020 x .020 X .005" +/-0.002 wide on one side and .030 x .030 .005" +/-0.002 wi... | 1 | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | 1 | |
| AFNDT-3130TI | BOEING ALL AIRCRAFT MODELS 51-00-14 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .050 x .050(+/-.005") x .005" (+0.00/-.002). MATERIAL: 6AL-4V TITANIUM. Includ... | 1 | |
| AFNDT-3179AL | 100° Countersink Multi Hole Standard. Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificat | 1 | |
| AFNDT-3240AL | Aluminum multi-hole reference standard. Contains 5 hole sizes; 1/8, 5/32, 3/16, 7/32 and 1/4" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3261AL | Olympus Style Aluminum multi-hole reference standard. Contains 11 hole sizes; 16.5mm, 17.0mm, 17.5mm, 18.0mm, 18.5mm, 19.0mm, 19.5mm, 20.0mm, 20.5mm, 21.0mm, and 21.5mm hole diameters. EDM notch = 0.5mm corner EDM notch and 0.5mm deep in each hole, length | 1 | |
| AFNDT-3262AL | Olympus Style Aluminum multi-hole reference standard. Contains 21 hole sizes; 4.0mm, 4.5mm 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm and 16.0mm hole diameters. EDM | 1 | |
| AFNDT-3262TI | Olympus Style Aluminum multi-hole reference standard. Contains 21 hole sizes; 4.0mm, 4.5mm 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm and 16.0mm hole diameters. EDM | 1 | |
| AFNDT-3269AL | Custom Multi-Hole Standard manufactured to the Specifications of Airbus part number 99A53003001101. Material: 2024-T351. 8 Total Hole Sizes: 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3287AL | Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T | 1 | |
| AFNDT-3402AL | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402AL-1 | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402TI | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3407AL | Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3407SS | 17-4PH Stainless Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), | 1 | |
| AFNDT-3407ST | 4340 Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), | 1 | |
| AFNDT-3407TI | Titanium Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3425 | Custom Eddy Current Multi-Hole Reference Standard. Hole Diameters: 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm, 13.0 mm, 13.5 mm, 14.0 mm. Two (2) EDM notches per hole.Material: Aluminium 7075-T76. | 1 | |
| AM-2809-3400 | STAND - MULTIPURPOSE, ENGINE HANDLING, TRENT 800 ENGINE | 1 | |
| ATS-18E | Stride Tool Milbar 18E Multi-Purpose Crimping Tool, Terminal, Hand | 1 | |
| C5ALLODUMUX | C5ALLODUMUX;5800-100G all ODU multiplexing options bundle | 1 | |
| C5ALLODUMUX-U1 | C5ALLODUMUX-U1;5800-100G all ODU multiplexing options bundle field upgrade | 1 | |
| C5ODU1 | C5ODU1;TB/MTS-5800 ODU1 Multiplexing Test Option | 1 | |
| C5ODU1-T30 | C5ODU1-T30;TB/MTS-5800 ODU1 Multiplexing Test Option - Timed Option | 1 | |
| C5ODU1-T30-U1 | C5ODU1-T30-U1;TB/MTS-5800 ODU1 Multiplexing Test Option - Timed Option Field Upg | 1 | |
| C5ODU1-U1 | C5ODU1-U1;TB/MTS-5800 ODU1 Multiplexing Test Option | 1 | |
| C5ODU2 | C5ODU2;TB/MTS-5800 ODU2 Multiplexing Test Option | 1 | |
| C5ODU2-T30 | C5ODU2-T30;TB/MTS-5800 ODU2 Multiplexing Test Option - Timed Option | 1 | |
| C5ODU2-U1 | C5ODU2-U1;TB/MTS-5800 ODU2 Multiplexing Test Option - Field Upgrade | 1 | |
| C5ODU3 | C5ODU3;TB/MTS-5800 ODU3 Multiplexing Test Option | 1 | |
| C5ODU3-T30 | C5ODU3-T30;TB/MTS-5800 ODU3 Multiplexing Test Option - Timed Option | 1 | |
| C5ODU3-U1 | C5ODU3-U1;TB/MTS-5800 ODU3 Multiplexing Test Option - Field Upgrade | 1 | |
| DAC ETOH AL | 7075-T6 Aluminum Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH AL | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH FE | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH TI | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DP8EPT | PANEL METER, MULTIFUNCTION, 4-DIGIT, 21 MM, 240 VAC, PLATINUM DP8EPT SERIES, 2 RELAY, USB | 1 | |
| E4146A-APC | E4146A-APC;MULTIMODE/SINGLEMODE 850/1300/1310/1550 NM OTDR with LS - SM APC AND MM PC | 1 | |
| E4146A-PC | E4146A-PC;MULTIMODE/SINGLEMODE 850/1300/1310/1550 NM OTDR with LS - PC ON SM AND MM | 1 | |
| E4146QUAD-PC-ARMY | E4146QUAD-PC-ARMY;MULTIMODE/SINGLEMODE 850/1300/1310/1550 NM OTDR - USARMY | 1 | |
| E80HCASE1 | E80HCASE1;Hard Carrying Case for Multiple Module Configuration | 1 | |
| EddyFi Ectane (E128RNMI) Base Unit | EddyFi Ectane (E128RNMI) Base Unit - Multi-technology for tube inspections: ECT, RFT, NFT, MFL, and array equivalents, and IRIS ultrasound technology, Plug-and-play connectivity | 1 | |
| FDS400-301 | COM-13694 Unit - Interface, Hand-Held Multi-Purpose (HHMPI) 737-600, -700, -800 Supplier: Z7C70 | 14 | |
| FDS400−301 | Hand Held Multi−Purpose Interface 31X−31−08 | 14 | |
| FLUKE 189 | INFRARED MEASUREMENT INSTRUMENT FLUKE MODEL 189 MULTIMETER (INCLUDING 80PK3A PROBE AND 80AK ADAPTER) | 4 | |
| FLUKE 87-5 | FLUKE 87-5INDUSTRIAL TRUE RMS MULTIMETER WITH TEMP | 8 | |
| Fluke 283 | MULTIMETER - 283 FC/PV ET PINCE AMPÈREMÉTRIQUE SANS FIL | 1 | |
| Gedore-2653087 | Gedore 2653087 LKV-40 TORQUE MULTIPLIER - Torque Multiplier, Range : min 500- max 4000 N.m | 1 | |
| Gedore-2653125 | Gedore 2653125 LKV-80RS TORQUE MULTIPLIER - Torque Multiplier, Range : min 800- max 8000 N.m | 1 | |
| Gedore-2653257 | Gedore 2653257 LKV-28L TORQUE MULTIPLIER - Torque Multiplier, Range : min 500- max 2800 N.m | 1 | |
| Gedore-2653273 | Gedore 2653273 LKV-28Z TORQUE MULTIPLIER - Torque Multiplier, Range : min 500- max 2800 N.m | 1 | |
| HU55094 | MULTIPURPOSE STAND TOWBAR (IF NOT INCLUDED IN THE HU55280-3 OR HU55281-4 ABOVE) | 7 | |
| HU55323-2 | STAND MULTIPURPOSE, ENGINE TRENT 800 | 1 | |
| HU55324-6 | STAND - MULTIPURPOSE, ENGINE HANDLING, TRENT 800 ENGINE | 3 | |
| HU55325 | STAND MULTIPURPOSE, ENGINE TRENT 800 | 1 | |
| HU55326 | STAND - MULTIPURPOSE, ENGINE HANDLING, TRENT 800 ENGINE | 1 | |
| IV8435 | BOROSCOPE;RIG;POINT LIGHT LEDS MULTIPLES S/FILTR;ALIM 100/240VCA IV8435 OLYMPUS OPTICAL LTDA. | 1 | |
| KPC4-480-25 | SESAME TECHNOLOGIES. INC. KPC4-480-25 Multiple Layer Pitot Probe Cover | 2 | |
| NC-089ATOM-D2CH | MULTIFUNCTIONAL PANEL PC 8.9 IN WSVGA | 1 | |
| NDT1027-.188/.500 | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1048-4.8/8.7 | Boeing Standard, Multi Hole, Certified to 737 PT6 51-00-00 FIG16 PG10, 7075-T6 w/ .020 x.020 x .005 MAX Width, PN will be NDT1048-4.8 NDT1048-5.1 NDT1048-5.5 NDT1048-6.3 NDT1048-6.7 NDT1048-7.1 NDT1048-7.9 NDT1048-8.3 NDT1048-8.7 | 1 | |
| PWA85623 | THIS IS A KIT OF MULTIPLE PART ACCORDING TO THE MANUAL SEE PART PWA 85293 FIG. 20 | 1 | |
| REX104A | EXTRACTOR, MULTI-SPLINE, 1/8" | 2 | |
| REX104C | EXTRACTOR MULTISPLINE 1/8 | 1 | |
| REX104C1 | EXTRACTOR MULTISPLINE 1/8 | 1 | |
| REX112C | EXTRACTOR MULTISPLINE 3/8 | 1 | |
| REX112C1 | 3/8IN MULTISPLINE EXTRACTOR | 1 | |
| REX120C | EXTRACTOR -MULTISPLINE 5/8IN | 1 | |
| REX120C1 | EXTRACTOR MULTISPLINE 5/8IN | 1 | |
| REX128C | EXTRACTOR -MULTISPLINE 7/8IN | 1 | |
| RH73-C20C30-7075T6 | Multi Hole Reference Standard,.188, .250, .313, .375, .438, .500, .875", .030" Corner and .020" Corner (opposite side), 7075-T6 Aluminum | 1 | |
| RM140-C50-7075T6 | Multi Purpose Standard (7075-T6 Aluminum), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM290-C30T20-2024T3 | Multi Purpose Standard, Aluminum, 1/8" to 1" x 1/32" w/ .020 Thru and .030 Corner Notch + 3 Surface Notches | 1 | |
| SWE81002 | SLING FOR 8200 SERIES MULTIPLIERS | 1 | |
| TB2-GOV-QUAD-P5KI | TB2-GOV-QUAD-P5KI;T-Berd 2000 Multimode/Singlemode 850/1300/1310/1550nm OTDR Package | 1 | |
| TP38 | COM-14383 PROBE - MULTIMETER, INSULATED, SLIM REACH | 4 | |
| TT-FVAM-MM-MPO-SP | TT-FVAM-MM-MPO-SP;Self-Paced - FVAm Benchtop Microscope - Multimode MPO Testing - 18 minutes | 1 | |
| TT-ONXDSL-MULTI-SP | TT-ONXDSL-MULTI-SP;Self-Paced - ONX-580 Multimeter Testing Overview - 13 minutes | 1 | |
| TY-CRJ2 | BAC FIXED WING MULTI-LINK TOWBAR HEAD, 34.218 IN L, POWDER-COATED, YELLOW | 2 | |
| TYAW139 | BAC Multi-Link Towbar Head, 24.863 in L, Powder-Coated, Yellow | 2 | |
| TYCRJ1 | BAC Fixed Wing Multi-Link Towbar Head, 40.788 in L, Powder-Coated, Yellow | 2 | |
| TYCRJ2 | BAC Fixed Wing Multi-Link Towbar Head, 34.218 in L, Powder-Coated, Yellow | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
