| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AN850829B | 1 13/16 IN 1 | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0EX26B | WRENCH, COMBINATION, STANDARD 13/16 | 4 | |
| 0EX28B | WRENCH, COMBINATION, STANDARD 13/16" | 4 | |
| 1226 | COMBINATION WRENCH 13/16 | 1 | |
| 1240184 | BRAD POINT DRILL #40,1-13/16 IN 1 PER CONTAINER | 1 | |
| 02490042 | 440.A.13/16-3/8DR x 13/16"AF CROW-RING | 1 | |
| 03490069 | 440.A.1.13/16-1/2DR x 1.13/16"AF CROW-RING | 1 | |
| 2-130V884-75 | O-RING VITON 75D 1-13/16 IN | 1 | |
| 214-1167 | 13/16IN 82.55MM 3-1/4IN LENGTH | 1 | |
| 214-6509 | 13/16IN 38.10MM 1-1/2IN LNG | 1 | |
| 214-6554 | SOCKET 13/16 1-15/16 IN. LONG | 1 | |
| 214-6570 | SOCKET 1-13/16 2-5/8 IN LNG | 1 | |
| 214-6571 | SOCKET 1-7/8 - -13/16 IN LNG | 1 | |
| 214-6572 | SOCKET 2IN 2-13/16IN LNG | 1 | |
| 246-8173 | 13/16IN IMPSWVL SKT | 1 | |
| 271-4609 | SOCKET- 13/16IN | 1 | |
| 271-4678 | SOCKET 13/16IN | 1 | |
| 29218.FI.I29 | Norbar 29218.FI.I29 - 1 13/16" AF FLARE END INLINE 16mm SPIGOT | 1 | |
| 29218.FI.I45 | Norbar 29218.FI.I45 - 2 13/16" AF FLARE END INLINE 16mm SPIGOT | 1 | |
| 29218.OI.I29 | Norbar 29218.OI.I29 - 1 13/16" AF OPEN END INLINE 16mm SPIGOT | 1 | |
| 29218.OI.I45 | Norbar 29218.OI.I45 - 2 13/16" AF OPEN END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I29 | Norbar 29218.RI.I29 - 1 13/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I45 | Norbar 29218.RI.I45 - 2 13/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RO.I29 | Norbar 29218.RO.I29 - 1 13/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I45 | Norbar 29218.RO.I45 - 2 13/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29219.FI.I29 | Norbar 29219.FI.I29 - 1 13/16" AF FLARE END INLINE 22mm SPIGOT | 1 | |
| 29219.FI.I45 | Norbar 29219.FI.I45 - 2 13/16" AF FLARE END INLINE 22mm SPIGOT | 1 | |
| 29219.OI.I29 | Norbar 29219.OI.I29 - 1 13/16" AF OPEN END INLINE 22mm SPIGOT | 1 | |
| 29219.OI.I45 | Norbar 29219.OI.I45 - 2 13/16" AF OPEN END INLINE 22mm SPIGOT | 1 | |
| 30362 | PIN ROLL 1/8 X 13/16IN | 1 | |
| 40 48 42 42 | KOMBINUOTAS RAKTAS 13/16" | 3 | |
| 40484242 | Combination spanners 13/16" | 3 | |
| 40CLEMIXTE13-16 | COMBINATION WRENCH 13/16 | 1 | |
| 44702 | COMBINATION WRENCH, 13/16 | 1 | |
| 40481212 | 13/16 COMBINATION WRENCH | 2 | |
| 41162630 | 220ASP.13/16X15/16-26x30spline EXLONG DE RINGSPNR | 1 | |
| 41443842 | 20.A.11/16.X.13/16-11/16x13/16" DE RING SPANNER | 1 | |
| 41444142 | 20.A.25/32.X.13/16-25/32x13/16" DE RING SPANNER | 1 | |
| 41474242 | 17A.13/16" - RATCHET COMBINATION WRENCH | 1 | |
| 41564246 | 25.AN.13/16.X.15/16-13/16x15/16 RATCHET RING SPNR | 1 | |
| 41614244 | 230.A.13/16.X.7/8-13/16x7/8 OFFSET DE RING SPNR | 1 | |
| 430-9050 | 1/2IN SQ DR CROWFOOT 1-13/16 | 1 | |
| 4926FL | 12 POINT HIGH CROWFOOT FLARE BITS 3/8" 13/16" | 1 | |
| 4958CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 13/16 INCH HEAD SIZE | 1 | |
| 5526 | 3/4" DRIVE 12 POINT SOCKET 13/16" | 1 | |
| 5558 | 3/4" DRIVE 12 POINT SOCKET 1-13/16" | 1 | |
| 58614042 | 731A/40.13/16-OPEN ENDED INSERT TOOL | 1 | |
| 58621042 | 732A/10.13/16-RING INSERT TOOL | 1 | |
| 58624042 | 732A/40.13/16-RING INSERT TOOL | 1 | |
| 7835-95 | RING SPANNER 7/8 X 13/16 | 1 | |
| 81-11-250 | PINZA PARA TUBOS Y CONNECTORES 9-13/16" | 2 | |
| 96400816 | 13/16.MAXI-COMBINATION SPANNER SET 16pc | 1 | |
| 96830885 | KILPINIS RAKTAS OPEN BOX 13 13/16 | 1 | |
| A1310B-31 | 4-13/16IN DISK ALUM | 1 | |
| A1310SB-31 | 4-13/16IN DISK STEEL | 1 | |
| A157A14 | ADAPTOR 13/16IN ID, 15/16IN OD | 1 | |
| A257A29 | ADAPTOR, 1-13/16IN OD | 1 | |
| A257A45 | ADAPTOR, 2-13/16IN OD | 1 | |
| AFHS20-2A-5 | Aluminum Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM corner... | 1 | |
| AFNDT-2069/Ti | Custom Bolt Hole Standard 6Al-4v Titanium. Contains 12 hole sizes; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch diameters.( .050" x .050" +/- .005" x .005"W +0.000" / -0.002" Corner EDM Notch. Per Boeing Specification 77... | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2129 | - hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; | 1 | |
| AFNDT-2130AL | 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2130S | 9 HOLE REFERENCE STANDARD 4130 STEEL, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2130TI | 9 HOLE REFERENCE STANDARD 6Al-4V Titanium , HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3110B | Custom Multi-Hole Standard made to the Specifications of 99A53003001101. Material: 2024-T351. 36 Total Hole Sizes: 45/64, 23/32, 47/64, 3/4, 49/64, 25/32, 51/64, 13/16, 53/64. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3241AL | Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains on the | 1 | |
| AFNDT-3251AL | 12 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCH | 1 | |
| AFNDT-3251TI | 12 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCHE | 1 | |
| AFNDT-3270AL | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3271AL | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3272CS | Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 31/32", 1. | 1 | |
| AFNDT-3272SS | Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 31/32", 1. | 1 | |
| AFNDT-3273TI | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3274SS | Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 31/32", 1. | 1 | |
| AFNDT-3286 | 12 HOLE REFERENCE STANDARD 7075-T6 (Hole Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1.0", 1-1/8",) .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3 | 1 | |
| AFNDT-3422 | Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM c | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3559AL-3 | 15 HOLE REFERENCE STANDARD, Material: 7075-T6 Aluminum. Hole Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.0. A Total 15 Mid-bore notch @ 0.030" deep x 0.004" wide x 0.060" long in each hole. 3 Surface EDM No... | 1 | |
| AGNNES23 | INT THREAD TOOL 11/16IN 13/16 | 1 | |
| AHS29-1A-0 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1A-2 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1S-0 | Carbon Steel(4340) Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 2... | 1 | |
| AHS29-1SS-0 | (304 Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16",... | 1 | |
| AHS29-1SS-1 | (Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/… | 1 | |
| AHS29-1T-0 | Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/... | 1 | |
| AHS29-C30304 | 304 Stainless Steel Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/ | 1 | |
| AHS29-C30INC | Inconel 718 Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8 | 1 | |
| AHS29-C30TI | 6AL-4V Titanium Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", | 1 | |
| AM-91000-96T | 1 DIA X 5 13/16 GRIP SAFETY PIN | 1 | |
| AN850813B | 13/16 IN 3/8 | 3 | |
| AN850829B | 1/2DR 1 13/16IN FLRNT C/FTWR | 2 | |
| ANS19171 | AXLE NUT SOCKET 4-13/16 IN 8PT | 1 | |
| ANWR20A | 20 1 13/16IN ALUM O/END AN WR | 1 | |
| ATI413-8 | HOLE SAW-FINE 13/16 DIA | 1 | |
| ATI41324 | HOLE SAW FINE TOOTH 1-13/16IN | 1 | |
| B71024-18 | 13/16-INCH WRENCH ASSEMBLY FOR B71024-35 | 8 | |
| BEXW261A | EXTRACTR, STD, 1/2 DR, 13/16IN | 1 | |
| BH1/4 | BH 1/4 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 1/4 INCH SIZE, SAE | 1 | |
| BH3/8 | BH 3/8 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 3/8 INCH SIZE, SAE | 1 | |
| BH5/16 | BH 5/16 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 5/16 INCH SIZE, SAE | 1 | |
| BLPCW1316 | COMBINATION WRENCH 13/16" | 1 | |
| BLPCW26B | 12PT 13/16IN COMWR | 1 | |
| BOER26 | 13/16IN 15 BX STD RAT COMWR | 1 | |
| C-FOOT-S-RING-13/16 | 13/16" SPLIT RING CROWS FOOT | 1 | |
| C-FOOT-SRING-1-13/16 | C-FOOT-SRING-1-13/16 TOOL | 1 | |
| C13/16I | CIRCLIP 13/16 INTERNAL | 1 | |
| CL-13-KR | CABLE RING 13/16 (21MM) | 1 | |
| CMMT44702 | COMBINATION WRENCH, 13/16 | 2 | |
| COMBINATION SPANNERS 13/16" | COMBINATION SPANNERS 13/16" | 1 | |
| CX2226 | 11/16-13/16IN HLFMN BXWR | 2 | |
| DX158A | 1 13/16IN HD F/DR STRT SLUG WR | 1 | |
| DX190A | 2 13/16IN HD F/DR STRT SLUG WR | 1 | |
| F261 | SOCKET, SHALLOW, 13/16", 12-POINT | 2 | |
| FC 58A | 1 13/16' IN. DRIVE CROWFOOT WRENCH | 4 | |
| FC58A | 3/8DR 1 13/16IN O/END C/FTWR | 4 | |
| FC90A | 3/8DR 2 13/16IN O/END C/FTWR | 3 | |
| FCO 26A | 13/16" IN. DRIVE CROWFOOT WRENCH | 4 | |
| FCO26A | 3/8DR 13/16IN O/END C/FTWR | 4 | |
| FHO26B | 13/16IN FLXHD/O/END COMWR | 1 | |
| FRH260S | 3/8DR 13/16IN FLRNT C/FTWR | 1 | |
| FU26B | 3/8DR 13/16IN 12PT SHL UNV SKT | 2 | |
| FW3/4-SZAA | FLAT WASHER 3/4 (13/16IDX2"ODX0.140THICK) STEEL ZINC | 1 | |
| G85D | LOCKBOLT GUN (13/16 INCH STROKE AND MINIMUM OF 6500 LB PULLING CAPACITY) | 1 | |
| G85D-S | GUN LOCKBOLT 13/16 INCH STROKE | 5 | |
| GFCO26A | 3/8DR 13/16IN O/END C/FTWR | 1 | |
| GFS261 | 6PT 3/8IN DR STD SKT 13/16IN | 1 | |
| GOEX260B | 12PT 13/16IN SHRT COMWR | 1 | |
| GOEX26B | 12PT 13/16IN STD COMWR | 1 | |
| GOEX58A | 12PT 1 13/16IN STD COMWR | 1 | |
| GP3126D | GREY PNEUMATIC 3126D 3/4 DRIVE X 13/16"" DEEP - 12 POINT | 1 | |
| GPS3090R | 3/4IN DR X 2-13/16IN STANDARD | 1 | |
| GR2426 | RING RACHET 3/4 X 13/16 | 1 | |
| GSAF1F | ADAPTER 1/2 X 3/8 - 1/2" DRIVE 1-13/16" SQUARE DRIVE ADAPTER, 1/2" INTERNAL DRIVE X 3/8" EXTERNAL DRIVE | 4 | |
| GSFS261 | 6PT 3/8IN DR DEEP SKT 13/16IN | 1 | |
| GSRESGSW261 | 13/16 DHX TQ ADP 1/2SQDR 3INCL | 1 | |
| GVO2628TH.20 | O/END 1 11/16-1 13/16IN RLRDWR | 1 | |
| GVS26B | 13/16IN 4/WYANG HEAD O/ENDWR | 1 | |
| Gedore-012225 | Gedore 012225 13/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012460 | Gedore 012460 13/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-026720 | Gedore 026720 13/16" OPEN END 8791-13/16"AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027820 | Gedore 027820 13/16" RING END 8792-13/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028720 | Gedore 028720 13/16''FLARED END 8797-13/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-049225 | Gedore 049225 13/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049460 | Gedore 049460 13/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| H744A-8 | CHERRYMAX PULLING HEADS STRAIGHT 13/16 X 2-1/16 | 2 | |
| H828-8 | CHERRYMAX PULLING HEADS RIGHT ANGLE 2-13/16" X 6-7/16" | 1 | |
| H846A-456 | CHERRYMAX PULLING HEADS STRAIGHT 13/16" X 2-1/16" | 2 | |
| HX580A | 1 13/16IN HD F/DR OFST SLUG WR | 1 | |
| IM1223 | 3-13/16IN-1IN DR.SHALLOW 6PT | 1 | |
| IM263 | 13/16IN-1IN DR.SAE SHALLW 6PT | 1 | |
| IM726 | 1 4PT 13/16IN D/SQ SHL PWR SKT | 1 | |
| IM903 | 2-13/16IN-1IN DR.SHALLOW 6PT | 1 | |
| IMD260 | 1/2IN DR 12PT SHALLOW 13/16IN | 2 | |
| IMD262A | 3/4" DRIVE 12-POINT SAE 13/16" FLANK DRIVE® SHALLOW IMPACT SOCKET | 1 | |
| IMD582 | 3-4IN DR 12PT 1 13/16IN IMP SK | 1 | |
| IMFS260 | 1/2 6PT 13/16IN THN SHL IMP SK | 1 | |
| J.13/16FL | 12 POINT HIGH CROWFOOT FLARE BITS 3/8" 13/16" | 1 | |
| J1226HASD | COMBINATION WRENCH 13/16 | 1 | |
| J4926FL | 12 POINT HIGH CROWFOOT FLARE BITS 3/8" 13/16" | 1 | |
| J4958CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 13/16 INCH HEAD SIZE | 1 | |
| J52124 | SOCKET SET, 3/8" DRIVE, 12 POINT, 13 PCS, SIZES: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", AND 1", MAKE: PROTO | 1 | |
| JHW11126 | 13/16 COMB WR 12 PT STD SATIN | 1 | |
| JHW31303 | 13/16IN 6PT SPK PLUG SKT 3/8DR | 1 | |
| JHW32126 | 1/2IN DR STD SOCKET 6PT 13/16 | 1 | |
| JHW32326 | 1/2IN DR DEEP SOCKET 6PT 13/16 | 1 | |
| JHW8811W-TH | T/H STRIKING WR 1 13/16IN | 1 | |
| JHWEX-29 | SCREW EXTRACTOR 13/16IN DRILL | 1 | |
| JHWRB-58 | SINGLE RAT BOX WRCH 1 13/16 | 1 | |
| JHWSFH-1811W | STRIKING WRENCH 1-13/16 /46MM | 1 | |
| JHWSFH1816AW | STRIKING WRENCH 2-13/16 / 71MM | 1 | |
| JSCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| KCT1900-13/16 | 13/16IN CROWS FOOT | 1 | |
| KCT1920-13/16 | 13/16IN CROWS FOOT | 1 | |
| KDT132260GR | 3/8IN DR 20MM XL SKT 13/16IN | 1 | |
| LDH262 | 3/4" DRIVE 12 POINT SOCKET 13/16" | 4 | |
| LDH582 | 3/4" DRIVE 12 POINT SOCKET 1-13/16" | 2 | |
| LES262B | 3/4DR 26-13/16 SHAL SPLINE | 1 | |
| LHS26D | HOLE SAW 13/16IN | 1 | |
| LIL61700 | 4 13/16IN DEAL DRIVE | 1 | |
| LIL61920 | 4-13/16IN BEARING DRIVER | 1 | |
| LSR1150 | THINWALL FLIP SOCKET 3/4/13/16 | 1 | |
| LSR1540 | 13/16IN DBL DUTY FLIP SKT | 1 | |
| LTA2426 | 3/4-13/16IN 15 SLM O/ENDWR | 1 | |
| LTILT1900-13/16 | 13/16IN CROWFOOT | 1 | |
| LTQ14122 | LTQ14 RATCHET CASS 3-13/16IN | 1 | |
| LTQ1490 | LTQ14 RATCHET CASS 2-13/16IN | 1 | |
| LTQ258 | LTQ2 RATCHET CASS 1-13/16IN | 1 | |
| LTQ30122 | LTQ30 RATCHET CASS 3 13/16IN | 1 | |
| LTQ30154 | LTQ30 RATCHET CASS 4 13/16 IN | 1 | |
| LTQ30186 | LTQ30 RATCHET CASS 5 13/16 IN | 1 | |
| LTQ458 | LTQ4 RATCHET CASS 1-13/16IN | 1 | |
| LTQ8122 | LTQ8 RATCHET CASS 3-13/16IN | 1 | |
| LTQ890 | LTQ8 RATCHET CASS 2-13/16IN | 1 | |
| MB73A | 5/16IN,13/16IN INJ BRSH | 1 | |
| MOIJ5326DPL | SOCKET DP SPLINE 1/2X13/16 | 1 | |
| MS17990C508 | BALL LOCK PIN Dia 8 x 20 (5/16 x 13/16) | 1 | |
| MTF1258 | 1-13/16IN CHR ANG SERV WRNCH | 1 | |
| MTFBLK1258 | 1-13/16IN BLK ANG SERVICE WR | 1 | |
| N8835 | SKT IMP 1IN DR 1-13/16IN 8PT | 1 | |
| NDT1084-.546/.937-1 | Boeing Standard, 8 holes, 4 columns, 3 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, 35/64, 37/64, 41/64, 11/16, 49/64, 13/16, 7/8, 15/16 | 1 | |
| OE3/8 | INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 3/8 INCH SIZE | 1 | |
| OE5/16 | OE 5/16 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 5/16 INCH SIZE | 1 | |
| OEX260B | 12PT 13/16IN SHRT COMWR | 2 | |
| OEX26B | 13/16IN STD F/DR COMWR | 4 | |
| OEX58 | COMBINATION WRENCH 1 13/16"_TIGHTEN/LOOSEN FOR BOLT/NUTS & B-NUTS_1-13/16 X 1-13/16" FLANK DRIVE_[OEX58] | 1 | |
| OEX58A | 12PT 1 13/16IN STD COMWR | 1 | |
| OEXL26B | 12PT 13/16IN LNG COMWR | 1 | |
| OSH26B | 6PT 13/16IN STD COMWR | 1 | |
| OXR26A | 13/16IN 0 OFFSET RAT COMBO WR | 1 | |
| PST686H113 | 1-13/16 PNEUMATIC SPINTORQ | 1 | |
| PTQ1WTCPBWD1 | BUDD STUD REACTION CUP 13/16IN | 1 | |
| QZO58ADP | TORQ ADAPT 1-13/16IN OPEN END | 1 | |
| QZX26A | 13/16 IN BOX TQ HEAD | 1 | |
| QZX26ADP | 13/16 IN BOX TQ HEAD | 1 | |
| QZX58A | TORQ ADAPT 1-13/16IN BOX END | 1 | |
| QZX58ADP | TORQ ADAPT 1-13/16IN BOX END | 1 | |
| R-2426 | 3/4 -13/16 SNAP-ON OFFSET RATCHETING BOX WRENCH | 1 | |
| R2426C | 3/4-13/16IN STD 0 RAT BXWR | 2 | |
| R2630C | 13/16-15/16IN STD 0 RAT BXWR | 1 | |
| RD7-7 | 13/16IN-20 SPND RTHR DIE | 1 | |
| REX126C | EXTRACTOR -MULTISPLINE 13/16IN | 1 | |
| REX126C1 | EXTRACTOR MULTISPLINE 13/16IN | 1 | |
| RH122-T20-2024T3 | 12 Hole Reference Standard, 5/32" to 13/16", with .020" thru notch, 2024-T3 Aluminum | 1 | |
| RH122-T40-7075T6 | 12 Hole Reference Standard, 5/32" to 13/16", with .040" thru notch, 7075-T6 Aluminum | 1 | |
| RH18-T20-2024T3 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 thru notches, 2024T3 Aluminum | 1 | |
| RH18.75-T20-7075T6 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 +/- .002 thru notches .004 +/- .002 wide notches, 7075-T6 Aluminum .75" thick plate | 1 | |
| RXFS605B | 5 PC 6-POINT DOUBLE END SAE FLARE NUT WRENCH SET (1/4?13/16") | 2 | |
| S261 | 1/2" Drive 12-point 13/16in. Sae Deep Socket | 2 | |
| S9704KR | 3/8DR 6PT 13/16IN SPARKPLG SKT | 1 | |
| S9704RHS | 13/16IN RETEN SPARK PLUG SOCK | 1 | |
| SBX2628 | 12PT 13/16-7/8IN S/SHP BXWR | 2 | |
| SC21026 | 3/8DR SHLW SCKT 6PT 13/16IN-CA | 1 | |
| SC34026 | 1/2DR SHLW SCKT 6PT 13/16IN-CA | 1 | |
| SC60026 | COMBINATION WRENCH 13/16 | 1 | |
| SCO58 | 1/2DR 1 13/16IN O/END C/FTWR | 2 | |
| SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| SDC-13/16 | 13/16" COBALT Silver & Deming Drill Bit with 1/2" Shank | 1 | |
| SES261B | 1/2DR 26-13/16 SHAL SPLINE | 1 | |
| SF261 | SOCKET, DEEP, 13/16", 12-POINT | 3 | |
| SGT4BR | 1/4 DRIVE 6-13/16 INSTINCT SOFT GRIP | 2 | |
| SIM1223 | 3-13/16IN-1IN DR. DEEP 6PT | 1 | |
| SIM903 | 2-13/16IN-1IN DR. DEEP 6PT | 1 | |
| SIMD260A | 1/2DR 12PT DEEP 13/16IN SKT | 1 | |
| SN21026 | 3/8DR SHLW SCKT 6PT 13/16IN-NE | 1 | |
| SN34026 | 1/2DR SHLW SCKT 6PT 13/16IN-NE | 1 | |
| SN60026 | COMBINATION WRENCH 13/16 | 1 | |
| SOCKET 3/8" SHALLOW, 13/16", 12-POINT | SOCKET 3/8" SHALLOW, 13/16", 12-POINT | 1 | |
| SOEX26 | 13/16IN STD F/DR+ COMWR | 3 | |
| SOEXL26B | 13/16IN F/DR+ LNG COMWR | 1 | |
| SOSR26 | 13/16IN SPLNE 0 DEG CMBO WRNCH | 1 | |
| SOXR26 | 13/16IN RAT COMBO FDP WRENCH | 1 | |
| SPANNER-COMB1-13/16" | SPANNER COMBINATION 1-13/16" | 1 | |
| SPANNER-COMB13/16" | SPANNER COMBINATION 13/16" | 1 | |
| SPANNER1.13/16-2IN | SPANNER 1.13/16,-2IN. KING DICK | 1 | |
| SPLIT-RING1-13/16" | SPLIT RING 1-13/16" | 1 | |
| SPLIT-RING13/16" | SPLIT RING 13/16" | 1 | |
| SPLIT-RING2-13/16" | SPLIT RING 2-13/16" | 1 | |
| STN35029-812 | 3/8IN DR 13/16IN CROWFOOT | 1 | |
| STP SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| SU26 | 1/2DR 13/16IN 6PT SHL UNIV SKT | 1 | |
| SVS26A | 13/16IN 4/WYANG O/ENDWR FDP | 1 | |
| SW261 | SOCKET 13/16 1/2" DRIVE SHALLOW SOCKET 12 POINT-13/16" | 4 | |
| T-12446 | DIE STOCK ADJ 1-13/16IN HEX | 1 | |
| T-64032H | CLAMP HOSE 1-13/16MIN 2-1/4MAX | 1 | |
| THAN850813 | 13/16 IN 3/8 DRV CROWFOOT | 1 | |
| THAN850829 | 1 13/16 IN 1/2 IN DRV CROWFOOT | 1 | |
| THXB2426A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 3/4 X 13/16IN,12-PT | 1 | |
| TS1171-6 | WING BOLT NUT TORQUE ADAPTER 13/16" EXT. WRENCH | 1 | |
| TS1176-6 | WING BOLT NUT TORQUE ADAPTER 13/16" EXT. WRENCH | 2 | |
| TTWY261A | TWIST SOCKET 13/16IN SHALLOW | 1 | |
| TW261 | Socket 13/16 in | 1 | |
| UR.812SS/3WL | .812" (13/16") Universal Scanner Probe, 3"WL, Stainless Steel, 1000KHz-2MHz | 1 | |
| VO2426B | 3/4IN-13/16IN STD O/ENDWR | 2 | |
| VO2628B | 13/16IN-7/8IN STD O/ENDWR | 1 | |
| VS26B | 13/16IN 4/WYANG HEAD O/ENDWR | 2 | |
| VS58B | 1 13/16IN 4/WYANG HEAD O/ENDWR | 1 | |
| VSG12446 | DIE STOCK ADJ 1-13/16IN SH | 1 | |
| VSG8461 | DIE 7/8IN-9 NC 1-13/16IN SH | 1 | |
| VSG8463 | DIE 7/8IN-14 NF 1-13/16IN SH | 1 | |
| VSG8465 | DIE 1IN-8 NC 1-13/16IN SH | 1 | |
| VSG8467 | DIE 1IN-14 NS 1-13/16IN SH | 1 | |
| VSG8564ZR | DIE 20MM 2.50 1-13/16IN SH | 1 | |
| VSG8565ZR | DIE 22MM 1.50 1-13/16IN SH | 1 | |
| VSG8568 | DIE 24MM 2.00 1-13/16IN SH | 1 | |
| VSG8569 | DIE 24MM 3.00 1-13/16IN SH | 1 | |
| WRENCH, COMBINATION, STANDARD LENGTH, 13/16", 12-POINT | WRENCH, COMBINATION, STANDARD LENGTH, 13/16", 12-POINT | 1 | |
| XB2426A | 3/4-13/16IN STD 10 F/DR BXWR | 1 | |
| XDES2630A | SPLINE WRENCH 13/16-15/16 | 2 | |
| XDH2226A | 11/16-13/16IN STD 15 F/DR BXWR | 1 | |
| XDHF 605 | SNAP-ON - SET, WRENCH, HI-PERFORMANCE, BOX, 0 DEG. OFFSET, 12-POINT, 5 PCS. (1/4 IN. TO 13/16 IN.) | 2 | |
| XDHF2226 | 12PT 11/16IN-13/16IN 0 BXWR | 1 | |
| XDSG26 | 13/16 IN 12PT SG BOX WRENCH | 1 | |
| XH126C | 13/16IN HD F/DR STRT BX TBLRWR | 1 | |
| XO2226 | 11/16-13/16IN DP 60 F/DR BXWR | 1 | |
| XS2226A | 11/16-13/16IN SHRT 10 BXWR | 1 | |
| YTS261 | 1/2DR 6PT 13/16IN DP FDX SKT | 1 | |
| YTW261 | 1/2DR 6PT 13/16IN SHL FDX SKT | 1 | |
| LDH262 | SOCKET SHALLOW 13/16 IN SIZE 3/4 IN DRIVE 12 | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
