| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A2921 G01 | TEMPLATE | 7 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98A27508027000 | TEMPLATE TEMPLATE-OUTBOARD FLAP,TRACKS 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508030000 | TEMPLATE TEMPLATE-INBOARD FLAP,TRACK 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508688000 | TEMPLATS TEMPLATES - OUTBOARD FLAP, TRAC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103014000 | TEMPLATE TEMPLATE,CUTTING-ANTENNA C.14-1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53309002000 | KARMAN ZONE DRILLING TEMPLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57004071000 | FLE INBD. RIB TEMPLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLT5302-013-01 | MARKING TEMPLATE (CALIBRATION) | 1 | |
| 015T1059-13 | MYLAR TEMPLATE - 015T1059 SHEET 1 | 1 | |
| 025170004-001 | CUT OUT TEMPLATE AFSB-B737-17-001-46-01 | 1 | |
| 05-20407 | ZONE TEMPLATE | 1 | |
| 0736-01-A-5901 | MYLAR TEMPLATE | 1 | |
| 08STHEB | TEMPERATURE TEMPLATES | 6 | |
| 0UT165 | POTENTIOMETER POSITIONING TEMPLATE | 1 | |
| 1-16456 | TAPERED GUIDE BOLT (FIXATION TEMPLATE CENTER WING) | 1 | |
| 1044350-201 | SNAP LOCATE TEMPLATE | 1 | |
| 10M-8780 | SEAT TRACK REPAIR TEMPLATE | 1 | |
| 115940010-1IF | LEADING EDGE TEMPLATE | 1 | |
| 115940010-2IF | LEADING EDGE TEMPLATE | 1 | |
| 115940020-1IF | LEADING EDGE TEMPLATE | 1 | |
| 115940020-2IF | LEADING EDGE TEMPLATE | 1 | |
| 1159SST643 | MYLAR INSPECTION TEMPLATE | 1 | |
| 1159SST643-1 | MYLAR INSPECTION TEMPLATE | 2 | |
| 1159SST643-2 | MILAR, TEMPLATE | 1 | |
| 11G-000-212-55-20-5000 | PITCH TRIM TAB TRAVEL TEMPLATE | 1 | |
| 13057-109 | WS 144 RIGGING TEMPLATE | 1 | |
| 133-384039-0001 | CANOPY TEMPLATE (MYLAR) | 1 | |
| 139A411106D | PROFILE TEMPLATE | 1 | |
| 139A411107D | PROFILE TEMPLATE | 1 | |
| 139A411108D | PROFILE TEMPLATE | 1 | |
| 139A411109D | PROFILE TEMPLATE | 1 | |
| 139A411110D | PROFILE TEMPLATE | 1 | |
| 139A411111D | PROFILE TEMPLATE | 1 | |
| 139A411112D | PROFILE TEMPLATE | 1 | |
| 139A411113D | PROFILE TEMPLATE | 1 | |
| 139A411114D | PROFILE TEMPLATE | 1 | |
| 139A411115D | PROFILE TEMPLATE | 1 | |
| 139A411116D | PROFILE TEMPLATE | 1 | |
| 139A411117D | PROFILE TEMPLATE | 1 | |
| 139A411121D | PROFILE TEMPLATE | 1 | |
| 139A411122D | PROFILE TEMPLATE | 1 | |
| 139A411123D | PROFILE TEMPLATE | 1 | |
| 139A411124D | PROFILE TEMPLATE | 1 | |
| 139A411125D | PROFILE TEMPLATE | 1 | |
| 139A411126D | PROFILE TEMPLATE | 1 | |
| 139W00-113-00 | DRILLING TEMPLATE | 1 | |
| 140 | DRAFTSMAN'S CIRCLE TEMPLATE, RAPIDESIGN | 1 | |
| 141AL834524D | TEMPLATE TEMPLATE | 1 | |
| 141AL834526D | TEMPLATE TEMPLATE | 1 | |
| 141AL834528D | TEMPLATE TEMPLATE | 1 | |
| 141AL834530D | TEMPLATE TEMPLATE | 1 | |
| 1993 | ASSY-3IN TEMPLATE GUIDE | 1 | |
| 1994 | ASSY-2IN TEMPLATE GUIDE | 1 | |
| 1C9403G01 | ADJUSTMENT TEMPLATE; OF THE VSV ACTUATOR; FOR GE GAS TURBINE; TP: GE 1C9403 | 1 | |
| 2-86160-807 | EMTEQ TEMPLATE TOOL | 1 | |
| 20215 | SET OF TEMPLATES FOR CREATING VARIOUS SHAPES AND PATTERNS WITH A ROUTER. | 1 | |
| 206-460 | MITTLER BROS LAYOUT TEMPLATE SET, 4 PIECE | 1 | |
| 21A-001-212-57-30-0000-000 | WING TIP POSITIONING TEMPLATE LH | 1 | |
| 21A-002-212-57-30-0000-000 | WING TIP POSITIONING TEMPLATE RH | 1 | |
| 21A-212-57-30-0000-000 | WING TIP POSITIONING TEMPLATE | 1 | |
| 22619 | ROUTER TEMPLATE GUIDE SET FOR CREATING PRECISE SHAPES AND EDGES. | 1 | |
| 226A410473D | ROUTER ROUTER TEMPLATE PORT | 1 | |
| 226A410474D | ROUTER ROUTER TEMPLATE STBD | 1 | |
| 226A411196D | ROUTER TEMPLATE LH | 1 | |
| 226A411197D | ROUTER TEMPLATE, RH | 1 | |
| 227A410152T | STRINGER TEMPLATE | 1 | |
| 227A612296T | STRINGER TEMPLATE | 1 | |
| 227A612297T | STRINGER TEMPLATE | 1 | |
| 227A612298T | STRINGER TEMPLATE | 1 | |
| 229530-169 | DRILLING TEMPLATE | 1 | |
| 23 | Tesa 04460007 10x templates for TT 10 | 1 | |
| 2315 | SILKSCREEN TEMPLATES | 7 | |
| 290732-835 | A320 GTRB - SKIN CUTTING TEMPLATE | 1 | |
| 2C6879P01 | Stg. 1 Fan Blade LE Template (80A3/80C2) | 4 | |
| 2C7808G01 | CONTOUR TEMPLATE | 1 | |
| 2MIT450Z3613 | 787 LOCATING TEMPLATE TOOL | 1 | |
| 2MIT65B90101-1 | INSTAL TEMPLATES - PRECOOLER O/F/V_[2MIT65B90101-1] | 1 | |
| 30G180000200-501 | AILERON RANGE TEMPLATE, LEFT | 1 | |
| 30G180000200-502 | AILERON RANGE TEMPLATE, RIGHT | 1 | |
| 30R0324P01 | (RT) TEMPLATE, INLET DEVICE PERFORATION | 1 | |
| 3101A53610275 | DRILLING TEMPLATE (F6198) | 1 | |
| 3101A53610284 | DRILLING TEMPLATE (F6198) | 1 | |
| 3102A53610275 | DRILLING TEMPLATE (F6198) | 1 | |
| 31301D5311119 | DRILLING TEMPLATE SILMECA | 1 | |
| 332A04270700-8301 | 49200145988011 TEMPLATE, CONTROL RIGGING, AIRCRAFT | 1 | |
| 35-92249-0001 | NLG RIGGING TEMPLATE | 1 | |
| 35-93346-0001 | DRILL HOLES TEMPLATE TOOL | 1 | |
| 3A4033-1 | PACK CONTOUR TEMPLATE | 1 | |
| 3G6205G00432 | PITCH LINK ADJUSMENT TEMPLATE | 1 | |
| 3SF3375 | SAWING APU DUCT TEMPLATE | 1 | |
| 402637 | AILERON RIGGING TEMPLATE | 1 | |
| 3400985 | RUDDER RIGGING TEMPLATE | 1 | |
| 121580380000 | BTAC FTAC ENCURSTATION TEMPLATE | 1 | |
| 121580385000 | BTAC FTAC ENCURSTATION TEMPLATE | 1 | |
| 121580390000 | BTAC FTAC ENCURSTATION TEMPLATE | 1 | |
| 41-01P11-0050-02 | TRACING TEMPLATE | 1 | |
| 41000F25572009000 | Drawing template for labels (88 x 40 mm) positioning | 1 | |
| 41010F25572020000 | Drawing template for labels (49 x 40 mm) positioning | 1 | |
| 41123-R815505-0000 | MASKING TEMPLATE | 1 | |
| 4AS5820500-435 | RUDDER TAB RANGE TEMPLATE | 1 | |
| 50-590158-25 | ENGINE RIGGING TEMPLATE | 2 | |
| 540610-1 | CAGE, CONTOUR TEMPLATE | 1 | |
| 540611-1 | CAGE, CONTOUR TEMPLATE | 1 | |
| 540615-1 | SPACER, CONTOUR TEMPLATE | 1 | |
| 550T05675-201 | SOFTWARE,POLY-WORKS TEMPLATES AND DATABASES | 1 | |
| 550T05675-201 | SOFTWARE,POLYWORKS TEMPLATES AND DATABASES | 1 | |
| 5807006-000 | 5807006-000 TEMPLATE AILERON | 1 | |
| 5807006-000 TEMPLATE AILERON | 5807006-000 TEMPLATE AILERON | 1 | |
| 5807007-000 | 5807007-000 TEMPLATE WING FLAP | 1 | |
| 5807008-000 | 5807008-000 TEMPLATE ELEVATOR | 1 | |
| 5940001-001 | 5940001-001 TEMPLATE, RUDDER | 1 | |
| 5940001-001 TEMPLATE, RUDDER | 5940001-001 TEMPLATE, RUDDER | 1 | |
| 60488-103 | PACK HEIGHT TEMPLATE | 1 | |
| 60488-105 | PACK HEIGTH TEMPLATE | 1 | |
| 60489-105 | HEIGHT CHECK TEMPLATE | 1 | |
| 61161-101 | HEIGHT CHECK TEMPLATE | 1 | |
| 62850-101 | HEIGHT CHECK TEMPLATE | 1 | |
| 62880-1 | HEIGHT CHECK TEMPLATE | 1 | |
| 62880-101 | HEIGHT CHECK TEMPLATE | 1 | |
| 63237-1 | (PACK HEIGHT TEMPLATE) 63237-1 | 1 | |
| 65102D53111009000 | DRILLING TEMPLATE (FAPE3) | 1 | |
| 65102D53111009001 | DRILLING TEMPLATE (FAPE3) | 1 | |
| 6796786 | COMP. BLADE REWORK TEMPLATE | 1 | |
| 6799724 | COMBUSTION LINER TRANSITION TEMPLATE | 1 | |
| 68101L929110103 | CABLE CUTTING TEMPLATE | 1 | |
| 68101L9291110103 | CUTTING TEMPLATE TOOL | 1 | |
| 68101LE0466TS00 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS01 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS02 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS03 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS04 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS06 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS08 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS0A | CABLE TEMPLATE | 1 | |
| 68101LE0466TS10 | CABLE TEMPLATE | 1 | |
| 68101LE0466TS30 | CABLE TEMPLATE | 1 | |
| 68613-12 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-14 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-16 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-22 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-24 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-26 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-40 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-42 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-44 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-48 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-50 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-52 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-62 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-64 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-66 | SIOUX Signature Series Router Template Guides | 1 | |
| 68613-72 | SIOUX Signature Series Router Template Guides | 1 | |
| 699857-9 | DRILLING TEMPLATE | 1 | |
| 70700-77207-041 | SPREAD PIN TEMPLATE | 1 | |
| 70700-77207-101 | SPREAD PIN TEMPLATE | 1 | |
| 78202-R815505-0000 | MASKING TEMPLATE | 1 | |
| 789746 | SHEATH BONDING TEMPLATE (HAMILTON STANDARD) | 1 | |
| 8007885100 | EROSION CHECKING TEMPLATE ASSEMBLY | 1 | |
| 80AC725305R3-4TK | Serration Slot Template | 1 | |
| 81101-R815505 | INSPECTION ZONE TEMPLATES (FACE SIDE) | 1 | |
| 81102-R815505 | INSPECTION ZONE TEMPLATES (CAMBER SIDE) | 1 | |
| 81104-R815505-0000 | SPAR POSITION TEMPLATE | 1 | |
| 81602-FH385-0000 | ULTRASONIC TEMPLATE & CAL | 1 | |
| 81602-R815505-0001 | INSPECTION ZONE TEMPLATE (FACE SIDE) | 1 | |
| 81602-R815505-0002 | INSPECTION ZONE TEMPLATES (CAMBER SIDE) | 1 | |
| 81602-R815505-001 | INSPECTION ZONE TEMPLATE | 1 | |
| 81602-R815505-002 | INSPECTION ZONE TEMPLATE | 1 | |
| 820156019001201 | CONFORMITY TEMPLATE (F6198) | 1 | |
| 82700011-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 846-011-200-1 | Positioning template | 1 | |
| 85517021-001-138 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 85517021-002-138 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 856A2413G01 | Fan Template | 2 | |
| 856A2802G01 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A2823G01 | POSITIONING TEMPLATE | 3 | |
| 856A2921G01 | Template, Locating - No. 1 and No. 2 Bearings Oil Supply Tubes (locating template) | 7 | |
| 856A2947G01 | Contour Template (Fan Blade) | 1 | |
| 856A2949G01 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A2949G02 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A2952 | DRILL TEMPLATE | 1 | |
| 856A2952G01 | DRILL TEMPLATE | 1 | |
| 856A3622G03 | FANBLADE TEMPLATE | 7 | |
| 856A3736 | #1 BEARING OIL TUBE TEMPLATE | 1 | |
| 856A3736G01 | Template, Locating - Drain Tube and No. 1 Bearing Oil Supply Tube (locating template) | 7 | |
| 856A3742G01 | Template, Locating - No. 1 Bearing Oil Tube (locating template) | 3 | |
| 856A3771 | FAN BLADE TEMPLATE | 1 | |
| 856A3771G01 | FAN BLADE LEADING EDGE TEMPLATE | 4 | |
| 856A3777G01 | LOCATING TEMPLATE | 3 | |
| 856A3777G02 | NO. 3 BEARING OIL SUPPLY LOCATING TEMPLATE (TEMPLATE) | 11 | |
| 856A3926 | TRACING TEMPLATE | 1 | |
| 856A4202 | (RT) TEMPLATE; COMB LINER PRFI | 1 | |
| 856A4617G01 | L/T EDGE CHECKING TEMPLATE - FAN | 1 | |
| 856A4617G02 | L/T EDGE CHECKING TEMPLATE - FAN BLADE | 1 | |
| 856A4628 | (RT) TEMPLATE, BLADE (INCHES) | 1 | |
| 856A4628G02 | DOVE TAIL WEAR TEMPLATE | 8 | |
| 856A4635G01 | DOVETAIL SLOT MASTER TEMPLATE - FAN | 1 | |
| 856A5787G03 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5928G01 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5928G02 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A6631G01 | Master Template | 2 | |
| 856A6803G01 | MASTER TEMPLATE | 1 | |
| 85740007-S901-138 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740007-S904-138 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740009-S903-138 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-003-138 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-004-138 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 87804014-101-76 | TRIMMING TEMPLATE TOOL | 1 | |
| 881001E0467B510 | CABLE TEMPLATE | 1 | |
| 8814-768-000 | INSP TEMPLATE AXIAL COMP. BLADE | 1 | |
| 8814768000 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| 8G6430G00131 | TAIL ROTOR PITCH LINK ADJUSTMENT TEMPLATE | 1 | |
| 90-LPB3-1.25-SLH9 | Bowers Box Length Profile Template | 1 | |
| 90-LPB3.5-2-H9 | Bowers Box Length Profile Template | 1 | |
| 90-LPB3.5-3-H9 | Bowers Box Length Profile Template | 1 | |
| 90-LPB4-1.5-76 | Bowers Box Length Profile Template | 1 | |
| 90-LPB4-2-38 | Bowers Box Length Profile Template | 1 | |
| 90-LPB4-2-50 | Bowers Box Length Profile Template | 1 | |
| 90-LPB4-3-38 | Bowers Box Length Profile Template | 1 | |
| 90-LPB4-3-50 | Bowers Box Length Profile Template | 1 | |
| 90-LPB4-3.375-A094 | Bowers Box Length Profile Template | 1 | |
| 90-LPB5-3-40 | Bowers Box Length Profile Template | 1 | |
| 90-LPB6-1.5-55 | Bowers Box Length Profile Template | 1 | |
| 90-LPB6-2-32 | Bowers Box Length Profile Template | 1 | |
| 90-LPP3-1.25-SLH9 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP3.5-2-H9 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP3.5-3-H9 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP4-1.5-76 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP4-2-38 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP4-2-50 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP4-3-38 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP4-3-50 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP5-3-40 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP6-1.5-55 | Bowers Pin Length Profile Template | 1 | |
| 90-LPP6-2-32 | Bowers Pin Length Profile Template | 1 | |
| 905954-1-1 | TRIM BALANCE DRILL TEMPLATE | 1 | |
| 956A6629P07 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 956A8344 | JIG TEMPLATE - TORQUING - LPT ASSY NUTS | 1 | |
| 98A27508030000 | TEMPLATE TEMPLATE-INBOARD FLAP,TRACK 2 | 2 | |
| 98A27508688000 | TEMPLATS TEMPLATES - OUTBOARD FLAP, TRAC | 1 | |
| 98A27803001000 | KRUEGER FLAP - FORM TEMPLATE | 5 | |
| 98A57103031000 | TRIMMING TEMPLATE | 1 | |
| 98D25003000000 | CONTOUR TEMPLATE 80VU | 1 | |
| 98D27309011-000 | ELEV-ACT DRILL TEMPLATE | 5 | |
| 98D27309011000 | ELEV-ACT DRILL TEMPLATE | 5 | |
| 98D53103014000 | TEMPLATE TEMPLATE,CUTTING-ANTENNA C.14-1 | 2 | |
| 98D53203005000 | TEMPLATE TEMPLATE DRILLING | 1 | |
| 98D54003020000 | TEMPLATE R/I RIB 1 TEMPLATE | 1 | |
| 98D57004011000 | TRACK TEMPLATE TRACK CAN | 1 | |
| 98D92003001040 | SMW TEMPLATE | 1 | |
| 98F27508204000 | TEMPLATE TEMPLATE | 1 | |
| 98F32103001202 | ROUTING TEMPLATE LEV | 1 | |
| 98F57304007000 | SHARKLET SHARKLET TEMPLATE | 1 | |
| 98L52208001000 | TEMPLATE TEMPLATE-DRILLING | 1 | |
| 98L53309002000 | KARMAN AREA DRILLING TEMPLATE | 1 | |
| 98L54103003000 | Drilling template，A380 | 1 | |
| 98L57508022000 | HOLES TEMPLATE HOLES MFTF3 | 1 | |
| 98S51605001-218 | CALIBRATION TEMPLATE STANDARD | 3 | |
| 98S51605001000 | Calibration Template Std | 2 | |
| 98S51605001202 | STEEL TEMPLATE | 3 | |
| 98S51605001206 | ALUMINIUM TEMPLATE | 3 | |
| 98S51605001212 | CALIBRATION TEMPLATE | 4 | |
| 98S51605001214 | ALUMINIUM TEMPLATE | 4 | |
| 98S51605001218 | CALIBRATION ALUMINIUM TEMPLATE | 3 | |
| 98S51605001218-REVE | CALIBRATION TEMPLATE STANDARD | 1 | |
| 98S51605001220 | STEEL STAINLESS TEMPLATE | 4 | |
| 98S51605001224 | CALIBRATION TEMPLATE | 4 | |
| 98S51605001230 | CALIBRATION TEMPLATE | 4 | |
| 98S57105003-200 | ENG RIB10/12 FIT. TEMPLATE | 4 | |
| 98S57105003200 | Eng RIB10/12 Fit. Template | 4 | |
| 98S57105004-200 | ENG RIB10/12 FIT. TEMPLATE | 4 | |
| 98S57105004200 | Eng RIB10/12 Fit. Template | 4 | |
| 98S76000004000 | HMU RIGGING TEMPLATE | 2 | |
| 98V57304009000 | TEMPLATE TEMPLATE-CRUISE ROLLER | 1 | |
| 99A57103013000 | Airbus Kit, Includes 1 ea of XA-605T (A5068), WE CANNOT SUPPLY THE TEMPLATES | 1 | |
| 99A57103057000 | LHS REPORTING TEMPLATE FOR NDT INSPECTION KIT | 1 | |
| 99A57103057004 | LH ANGULAR REPORTING TEMPLATE | 1 | |
| 99A57103057008 | RH ANGULAR REPORTING TEMPLATE | 1 | |
| 99A57103057009 | LHS REPORTING TEMPLATE | 1 | |
| 99A57103057010 | RHS REPORTING TEMPLATE | 1 | |
| 99D51103003000 | TRANSPARENT TEMPLATE | 1 | |
| 99D52103003000 | NDT NDT TEMPLATE TOOL | 1 | |
| 99D53103002000 | Reference Standard Template | 1 | |
| 99V51307005000 | NDT NDT TEMPLATE TOOL | 1 | |
| 99V51307006000 | NDT NDT TEMPLATE TOOL | 1 | |
| 9R3422G01 | FWD FAN CASE TEMPLATE | 1 | |
| A11004 | STEERING ANGLE LOCATING TEMPLATE | 1 | |
| A1M-EMB170-GE | GSE 315 TEMPLATES MYLAR, RVSM INSPECTION | 2 | |
| A1M-L500-GE-2A | LH PROBE TEMPLATE | 1 | |
| A1M-L500-GE-2B | RH TEMPLATE | 1 | |
| A1M-L500-GE-3A | LH TEMPLATE | 1 | |
| A1M-L500-GE-3B | RH TEMPLATE | 1 | |
| A55001-47U | BOEING DET TEMPLATE | 1 | |
| A55006-1 | BLADE SEAL TEMPLATE | 1 | |
| A55006-1-ML | BLADE SEAL TEMPLATE | 1 | |
| AFNDT-2110 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (SELECTED RIVETS). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AJE61110854 | ULTRASONIC TEMPLATE & CAL | 1 | |
| APX-1-30P4500500-501 | ELEVATOR RANGE TEMPLATE, LEFT | 1 | |
| APX-1-30P4500500-502 | ELEVATOR RANGE TEMPLATE, RIGHT | 1 | |
| AS350.000.046 | INSPECTION TEMPLATE FOR TAIL ROTOR BLADES | 1 | |
| B231001T1-505 | DRILL TEMPLATE SET | 1 | |
| B32053 | CONTOUR TEMPLATE - NLG DOOR | 1 | |
| B32053 REV NC | CONTOUR TEMPLATE - NLG DOOR | 1 | |
| B32053-1 | CONTOUR TEMPLATE - NOSE LANDING GEAR (NLG) DOOR | 5 | |
| B32053-1-M | CONTOUR TEMPLATE | 1 | |
| B32053-2-7 | CONTOUR TEMPLATE. NLG DOOR. | 1 | |
| B717-100-01 | FAN BLADE BOLT TEMPLATE | 1 | |
| B76003-1 | RIGGING EQUIPMENT - ENGINE CONTROL SYSTEM (-4 TEMPLATE AND-2 WEDGE) | 7 | |
| B78001-155 | BOEING DET TEMPLATE | 1 | |
| C00814100-LJIG02-0001 | TOOL - TEMPLATE, DOUBLER LOCATION | 1 | |
| CDKB737-400 | AET737-11 FLOOR BEAM SUPPORT TOOLING,-12 CARGO DOOR LOWER JAMB TOOLING,-13 CARGO DOOR UPPER JAMB TOOLING, -14 CARGO DOOR LATCH JIG, -51 CDK DRILL TEMPLATE KIT | 1 | |
| D19722 | PACK HEIGHT TEMPLATE | 1 | |
| D53111009000 | DRILLING TEMPLATE | 1 | |
| D53111009001 | DRILLING TEMPLATE | 1 | |
| D60-1127-10-52 | SAFETY WALK TEMPLATE | 1 | |
| DAT06AEMG 1016 | MARKING TEMPLATE | 3 | |
| DAT06AEMG1016 | MARKING TEMPLATE | 3 | |
| DAT08AEMT5006 | MARKING TEMPLATE | 1 | |
| DLT5302-013-01 | MARKING TEMPLATE | 1 | |
| DSA254 | DA-‐42 FLAP TEMPLATE | 1 | |
| DT314U2100-1 | DRILL TEMPLATE | 1 | |
| DZZ7218-1 | SET - TEMPLATE, DOOR | 3 | |
| EAL0414J33A | ANDON DRILL TEMPLATE | 1 | |
| EC TEMPLATE (.600 | EDDY CURRENT CIRCLE TEMPLATE (0.600" DIAMETER HOLE) .700", .800" & .900" HOLES ON .063" 2024-T3 | 1 | |
| EHT-B | Engine Hub Template for Bolts | 1 | |
| ELT TEMPLATE-1 | EDDY CURRENT CIRCLE TEMPLATE, 0.750"Ø. 3 HOLE SIZES: .749", .750",.751". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-10 | EDDY CURRENT CIRCLE TEMPLATE PER 2-22566-905, .201" HOLE DIAMETER. 3 HOLE SIZES: .700", .800",.900". | 1 | |
| ELT TEMPLATE-2 | EDDY CURRENT CIRCLE TEMPLATE, 0.201"Ø. 3 HOLE SIZES: .200", .201",.202". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-3 | EDDY CURRENT CIRCLE TEMPLATE, SELECT RIVET SIZES. 12 HOLE SIZES: .125", .156",.187", .218", .250", .281", .312", .343", .375", .437", .500", .562". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-7 | EDDY CURRENT CIRCLE TEMPLATE PER 2-22566-905, .201" HOLE DIAMETER. 3 HOLE SIZES: .301", .401",.501". | 1 | |
| F2MB957301 | POSITIONING TEMPLATE FOR KARMAN INSTALLATION | 1 | |
| F70177 | WEAR TEMPLATE -0 COVE LIP DOOR LATCH USED IN | 1 | |
| F80-0-50219 | Marking Template | 1 | |
| F80236-1 | STOWAGE BIN STRIKER ADJUSTMENT TEMPLATE | 1 | |
| FGFB957301 | POSITIONING TEMPLATE | 1 | |
| G0142710005 | KIT, AILERON BALANCE TABS CHECK TEMPLATES | 1 | |
| G0142710006 | KIT, AILERONS CHECK TEMPLATES | 1 | |
| G0142710007 | KIT, AILERON TRIMS CHECK TEMPLATES | 1 | |
| G0142750002 | KIT, FLAPS CHECK TEMPLATES | 1 | |
| G0142760002 | KIT, SPOILERS CHECK TEMPLATES | 1 | |
| G1003220001-001 | KIT, NLG FWD DOOR ROD TEMPLATE 115V | 1 | |
| G1003220001-021 | KIT, NLG FWD DOOR ROD TEMPLATE 220V | 2 | |
| G1003220001-049 | KIT, NLG FWD DOOR ROD TEMPLATE 115V | 1 | |
| G1003220001-063 | KIT, NLG FWD DOOR ROD TEMPLATE 220V | 1 | |
| G700-314201-1 | KIT, CABLE ASSY DAU HARNESS, TEMPLATE | 1 | |
| GALLEYTEMPLATE | GALLEY TEMPLATE TOOL | 1 | |
| GS 20834-1 | PROTRACTOR AND TEMPLATE HOLDER | 4 | |
| GS16316-1 | KIT, TEMPLATE RH | 1 | |
| GS16316-11 | POSITION TEMPLATE | 1 | |
| GS16316-12 | POSITION TEMPLATE | 1 | |
| GS16316-13 | POSITION TEMPLATE | 1 | |
| GS16316-14 | POSITION TEMPLATE | 1 | |
| GS16317 | KIT, TEMPLATE LH | 1 | |
| GS16317-1 | LEFT BAND BARREL REWORK TEMPLATE KIT | 1 | |
| GS18284-1 | SHEATH TEMPLATE | 5 | |
| GS19826 | BLADE TEMPLATE | 1 | |
| GS19826-1 | PROPELLER BLADE TEMPLATE | 3 | |
| GS20834-1 | HOLDER,PROTRACTOR AND TEMPLATE | 4 | |
| GS20864-1 | PROPELLER BLADE TEMPLATE | 3 | |
| GS20969-1 | SHEATH TEMPLATE | 1 | |
| GS21354-1 | SHEATH TEMPLATE | 1 | |
| GS22990-1 | PROPELLER BLADE TEMPLATE | 1 | |
| GS22991-1 | HOLDER, PROTRACTOR & TEMPLATE | 1 | |
| GS23418-1 | PROPELLER BLADE TEMPLATE | 1 | |
| GS23419-1 | PROTRACTOR AND TEMPLATE HOLDER | 1 | |
| GS23442-1 | SHEATH TEMPLATE | 1 | |
| GS23980-1 | BLADE TEMPLATE | 1 | |
| GS24151-1 | INSPECTION ZONE TEMPLATES (FACE SIDE) | 1 | |
| GS24151-2 | INSPECTION ZONE TEMPLATES (CAMBER SIDE) | 1 | |
| GS24287-1 | BLADE TEMPLATE | 1 | |
| GS24288-1 | BLADE TEMPLATE | 1 | |
| GS24289-1 | MASKING TEMPLATE | 1 | |
| GS24293-1 | FRONT INSPECTION AREA TEMPLATE | 1 | |
| GS24294-1 | SIDE INSPECTION AREA TEMPLATE | 1 | |
| GSB2712002 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712003 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712004 | TOOL-TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2712005 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712005| | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2715002 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715003 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715004 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715005 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| GSB2733003 | AOA VANE TOOL - MYLAR TEMPLATE | 3 | |
| GSE2720439 | AILERON RANGE TEMPLATE, LEFT | 1 | |
| GSE2720440 | AILERON RANGE TEMPLATE, RIGHT | 1 | |
| GSE2720443 | ELEVATOR RANGE TEMPLATE, LEFT | 1 | |
| GSE2720444 | ELEVATOR RANGE TEMPLATE, RIGHT | 1 | |
| HCS2036-01-012 | ROUTER WITH TEMPLATE | 1 | |
| HCS2036-01-122D | ROUTER TEMPLATES | 1 | |
| HCS2036-01-122E | ROUTER TEMPLATES | 1 | |
| HCS2036-01-122F | ROUTER TEMPLATES | 1 | |
| HJT5310-200-1UDM-0000 | HONDA JET INSPECTION TEMPLATE | 1 | |
| HRS-10A-0/0824 | NDT STANDARD TEMPLATE | 1 | |
| HS7548 | BLADE ANGLE TEMPLATE | 2 | |
| HS9320 | SPINNER NOSE DRILLING TEMPLATE | 1 | |
| HS9373 | LEADING EDGE TEMPLATE | 1 | |
| HSP5564 | BLADE TEMPLATE | 1 | |
| HU23988 | PROFILE TEMPLATE | 1 | |
| HU82158-2 | SECTION TEMPLATES CONVEX (SUCTION) SIDE 35 | 1 | |
| HU82159-2 | SECTION TEMPLATES CONCAVE (PRESSURE) SIDE 36 | 1 | |
| IAE3R19320 | TEMPLATE TEMPLATE | 2 | |
| IAE3R19401 | PERSPEX TEMPLATE C/C ASSEMBLY C AND D | 1 | |
| IAE3R19403 | PERSPEX TEMPLATE C/C ASSEMBLY C AND D | 1 | |
| K602075 | LUMINANCE TEMPLATE | 1 | |
| L621M1014051C125-01 | CUTTING TEMPLATE | 1 | |
| LE48401Z01-170-69717-409 | DRILLING TEMPLATE (BOX 3) | 1 | |
| LE48401Z01-170-69917-409 | DRILLING TEMPLATE (BOX1) | 1 | |
| LE6923 | PIVOT DOOR TEMPLATE | 1 | |
| LJH50504-001-1 | LOCATING TEMPLATE | 1 | |
| LMT 00279 | TRUMPET TEMPLATE | 1 | |
| M10DE0103/104-160A0 | DUCT ID ROUNDNESS TEMPLATE | 1 | |
| M10DE0103/104-160B0 | SIDE FORK CENTRE DISTANCE TEMPLATE | 1 | |
| M46214-1000 | ADJUSTMENT TOOL WITH THE TEMPLATES (M46214-1, S47789 AND S47790) | 9 | |
| M65723902A | POSITIONING TEMPLATE | 1 | |
| M65724060A | ORIENTATION TEMPLATE | 1 | |
| M65724061A | ORIENTATION TEMPLATE | 1 | |
| M65725476 | ORIENTATION TEMPLATE | 1 | |
| M65725647 | CUTTING TEMPLATE | 1 | |
| MIT813J3100-501 | TEFLON PAINT TEMPLATE (1 OF 2) | 1 | |
| MIT813J3100-601 | TEFLON PAINT TEMPLATE (2 OF 2) | 1 | |
| MX-3 | DEFECTOSCOPIST TEMPLATE 53 | 1 | |
| MX-3 TAM135273 | DEFECTOSCOPIST TEMPLATE 53 | 1 | |
| N14714 | POSITIONING TEMPLATE | 1 | |
| OUT219 | DRILL TEMPLATE | 1 | |
| OUT220 | DRILL TEMPLATE | 1 | |
| PCT-1 | PYLON CORROSION TEMPLATE 1 | 1 | |
| PCT-2 | PYLON CORROSION TEMPLATE 2 | 1 | |
| PPT-4AS-5820500-435 | GSE 2720029 - RUDDER TAB RANGE TEMPLATE | 1 | |
| PPT-4AS5820000-430A | GSE 2720028 - RUDDER RANGE TEMPLATE | 1 | |
| PW88069 | JIG DRILL TEMPLATE ASSEMBLY | 1 | |
| PW88070 | PLATE NUT HOLE TEMPLATE | 1 | |
| PW88072 | DRILL TEMPLATE | 1 | |
| PW88073 | DRILL TEMPLATE | 1 | |
| PWA202076 | STARTER DUCT VALVE LINKAGE TEMPLATE | 2 | |
| PWA29836 | SIGHTING TEMPLATE | 1 | |
| PWA75431 | MARKING TEMPLATE | 1 | |
| PWA86053 | MARKING TEMPLATE | 1 | |
| PWA86290 | RADIUS CUTTER TEMPLATE FAN BLD | 1 | |
| PWC38264 | RIGGING TEMPLATE | 6 | |
| PWC54021 | RIGGING TEMPLATE | 6 | |
| PWC56007 | Inspection template | 1 | |
| PWC56180 | Lenght Template GA | 1 | |
| Q46384 | ADJUSTMENT TEMPLATE | 2 | |
| R-140 | CIRCLE TEMPLATE | 1 | |
| R815505-001 | INSPECTION ZONE TEMPLATE | 1 | |
| R815505-002 | INSPECTION ZONE TEMPLATE | 1 | |
| RBW6230G00131-8G | MR PITCH LINK ADJUSTMENT TEMPLATE | 2 | |
| RCU3D000670999A | GSE - VPU TEMPLATE | 1 | |
| RRT004942 | SHUTTLE - RE-DRESS TEMPLATE | 1 | |
| RRT082508 | TRENT 1000 SILK SCREEN PRINT INSPECTION TEMPLATE ASSEMBLY | 1 | |
| RSE1055 | CONTOUR TEMPLATE-TORQUE RING INNER FAIRING | 1 | |
| RSE1055 REV NC | CONTOUR TEMPLATE-TORQUE RING INNER FAIRING | 1 | |
| RSE1168 | DRILL TEMPLATE STRAKE- FWD ACC | 1 | |
| RSE1173 | SCRIBE TEMPLATE | 1 | |
| RSE1173 REV NC | SCRIBE TEMPLATE | 1 | |
| RSEI055 | CONTOUR TEMPLATE-TORQUE RING INNER FAIRING | 1 | |
| SK34477-101 | TOOL NET POCKET FRAME HOLE TEMPLATE | 1 | |
| SK34477-103 | TOOL NET POCKET FRAME HOLE TEMPLATE | 1 | |
| SRT10S18M6N | 1HP ROUTER 18K TEMPLATE 6MM | 1 | |
| SRT10S18N | 1HP ROUTER 18K TEMPLATE 1/4IN | 1 | |
| SRT10S25M6N | 1HP ROUTER 25K TEMPLATE 6MM | 1 | |
| SRT10S25N | SIOUX Signature Series Router - Template Nose | 2 | |
| ST61407 | Checking Template | 1 | |
| ST7216 | FASTENER - DRILL TEMPLATE | 1 | |
| T007913 | 300 ONLY DRILL TEMPLATE | 1 | |
| T335772 | TCAS ANTENNA TESTS TEMPLATES | 1 | |
| T93688 | Rigging Plate Template | 1 | |
| TM0131 G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRES. BLADES | 1 | |
| TM0131G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| TM5970G001 | POSITIONING TEMPLATE | 1 | |
| TM6935G001 | EROSION GAGE INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 2 | |
| TM6936G001 | ENGINE COMPRESSOR EROSION CHECK TEMPLATE ASSEMBLY D23 | 3 | |
| TMP00218 | MARKING TEMPLATE, RING GEAR | 1 | |
| TMPL-314-2100-2 | FASTENER TEMPLATE | 1 | |
| TN079590 | PROTRACTOR TEMPLATE, THROTTLE RIGGING | 1 | |
| TO4774 | HEIGHT CHECK TEMPLATE | 1 | |
| TO5155 | PACK HEIGHT TEMPLATE | 1 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| V1436 | LABEL: MYLAR TEMPLATE, | 1 | |
| 133-384039-0001 | CANOPY TEMPLATE | 1 | |
| 98S51605001212 | ALUMINIUM TEMPLATE | 4 | |
| GSB2715004 | MYLAR TEMPLATE -RIGHT ELEVATOR RIGGING TOO | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
