| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3501-08-1 | ADAPTER | 1 | |
| K71012-1 | ADAPTER | 9 | |
| PWC62580 | ADAPTER | 4 | |
| PWC64042 | ADAPTER | 3 | |
| PWC64625 | ADAPTER | 1 | |
| ACT-IR220L | ADAPTER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 173785 | CHARGING ADAPTER - OXYGEN SYSTEM | 9 | |
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| 2024482-1 | TORQUE ADAPTER AND HOLDER | 1 | |
| (CALIB) 02-2962-40 | THREADED SHANK ADAPTER DRILLS (DRILL SIZES: 1/4") (DECIMAL EQUIVALENT: .2500") (ADD TO CART: ADD TO CART) (DRILL SIZES: 1/8") (DECIMAL EQUIVALENT: .1250") (ADD TO CART: ADD TO CART) (DRILL SIZES: 17/64") (DECIMAL EQUIVALENT: .2656") (ADD TO CART: CONTACT | 1 | |
| (CALIB) 02-7813C0100 | JACK ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 101-00562 | FUEL QUANTITY ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 101-00808 | DC FUEL QTY ADAPTER MODULE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 109G6220G01-113 | CALIBRATION ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 114-1145 | PLUG ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 21C8208G01 | VEN SYSTEM HYDRAULIC ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 31171-000-002 | SG239 Light Maintenance Crane - Adapter Front LCV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 727737 | Fuel Gauging Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 79000218-1 | TEST UNIT ADAPTER - FCE BATTERY (CALIBRATION) | 1 | |
| (CALIB) 834729-1 | Torque Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 856A2659G01 | FILTER ADAPTER - DRY OUT (CALIBRATION) | 1 | |
| (CALIB) 97L42002004000 | SET OF ADAPTER TOOLS FOR AFDX HARNESSES TEST SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27308032000 | BENCH ADAPTER BENCH TEST DETENT UNITS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27808003001 | DRIVE ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A28007570000 | ADAPTER ADAPTER - VENT AND DRAIN VALVE, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A35207599000 | HOSE ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104080000 | SOCKET WRENCH ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32403005000 | SOCKET WRENCH ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103002102 | AIR DATA SYSTEM FLUSHING 2-PIN ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 98F27508278001 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508278002 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54403002000 | DYNAMOMETRIC ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309008000 | SUPPORT ADAPTER KIT-EHA OR SERVOCONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S45105000000 | PMAT 2000 ADAPTER CABLE | 1 | |
| (CALIB) A24011-1 | HOIST ADAPTER IDG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ARA 552 | Radio Altimeter Analog Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D14089-101 | VACUUM ADAPTER (CALIBRATION) | 1 | |
| (CALIB) F80014-16 | HOIST ADAPTER STABILIZER JACKSCREW (CALIBRATION) | 1 | |
| (CALIB) G24012-1 | Generator adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GS18300 | KIT BALANCE ADAPTER (CALIBRATION) | 1 | |
| (CALIB) HU40025 | Driving Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55761 | LIFTING ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J21001-82 | HX Adapter assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21006-46 | Jack adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21006-53 | Jack Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21011-62 | Jack Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K24001-1 | HOIST ADAPTER ASSY - VFSG & ASG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M28TC0015000 | TEST ADAPTER - DISPENSE PUMP | 1 | |
| (CALIB) PSD737-1 | FUEL QTY, ADAPTER (CALIBRATION) | 2 | |
| (CALIB) RRT032365-1 | Generator Lifting adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT083782 | LIFTING ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT084300 | Lift Adapter B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHNA01-00-00 | NLG JACK ADAPTER (CALIBRATION) | 1 | |
| (CALIB) TPAA2B0A0A0A0 | Lifting adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA430 | Gyro Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA435 | Trim Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA436 | Trim Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| 0014071A0300000 | JACK ADAPTER 2EA | 1 | |
| 0032205 | XLG3T61120FG TIP ADAPTER BLACK | 1 | |
| 0032206 | XLG3T61120SG TIP ADAPTER BLUE | 1 | |
| 0032212 | XLG3TM615050SG STEREO TIP ADAPTER BL | 1 | |
| 0032215 | XLG3TM616060FG STEREO ADAPTER BLACK | 1 | |
| 00460-015-000 | TRIPOD ADAPTER HYDRO | 1 | |
| 00460-042-000 | NOSE JACKING ADAPTER - 747 | 1 | |
| 00460-062-000 | STANDARD ADAPTER FOR TRIPOD JACK | 1 | |
| 00460-155-000 | CONNECTION ADAPTER FOR WING JACK | 1 | |
| 005-22-1 | HYDRAULIC FITTING ADAPTER ¾ JIC FEMALE TO 9/16 JIC MALE | 1 | |
| 0061R41181 | INSULATION RESISTANCE ADAPTER CABLE | 1 | |
| 0061R54568-06 | TTL ADAPTER CABLE | 1 | |
| 00711096V | BENCH ADAPTER WASHER | 1 | |
| 00GSE-1039-00 | TRANSFILL ADAPTER JIC4 X AN800 NIPPLE, | 1 | |
| 00GSE-1039-08 | TRANSFILL ADAPTER JIC4 X AN800 NIPPLE, 8 IN | 1 | |
| 0107-6-6 | MALE PIPE ADAPTER 3/8-18NPTF MALE 3/8-18NPSM FEMALE | 1 | |
| 01090095 | GREASE GUN ADAPTER KITS | 1 | |
| 011-0258-001 | TEST ADAPTER KIT | 1 | |
| 02-2621-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2621-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2621-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2621-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2621-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2621-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2621-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2622-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2622-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2921-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) | 1 | |
| 02-2921-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) | 1 | |
| 02-2921-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) | 1 | |
| 02-2921-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) | 1 | |
| 02-2921-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-17/64C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2921-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2921-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2921-9/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2922-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-D | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-DC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-F | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-FC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-G | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-GC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-J | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2923-JC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-2.3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-2.3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.17 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.17C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.96 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-3.96C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-4.76 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-4.76C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-6.35 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-6.35C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2924-8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2941-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2941-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2941-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2941-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2941-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2941-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2941-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2942-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add t | 1 | |
| 02-2942-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2951-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) | 1 | |
| 02-2951-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2951-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) | 1 | |
| 02-2951-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2951-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2952-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Contact us to order) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Contact us to order) (Drill sizes: 3/16") (Decimal equivalent: .1875") (Add to | 1 | |
| 02-2961 - 1/8 | THREADED SHANK ADAPTER DRILLS | 2 | |
| 02-2961-1-4 | THREADED SHAND ADAPTER DRILLS Ø ¼” | 1 | |
| 02-2961-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) | 1 | |
| 02-2961-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) | 1 | |
| 02-2961-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) | 2 | |
| 02-2961-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) | 1 | |
| 02-2961-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-17/64C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-5-16 | THREADED SHAND ADAPTER DRILLS Ø 5/16” | 1 | |
| 02-2961-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2961-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2961-9/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2962-8C | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-008 | 1 | |
| 02-2963-D | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-DC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-F | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-FC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-G | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-GC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-J | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2963-JC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-2.3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-2.3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.17 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.17C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.96 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-3.96C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-4.76 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-4.76C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-6.35 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-6.35C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2964-8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-1-4C | THREADED SHAND ADAPTER DRILLS Ø ¼” | 1 | |
| 02-2971-1-8C | THREADED SHAND ADAPTER DRILLS Ø 3/8” | 1 | |
| 02-2971-1/4 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) | 1 | |
| 02-2971-1/4C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) | 1 | |
| 02-2971-1/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) | 2 | |
| 02-2971-1/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) | 1 | |
| 02-2971-17/64 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-17/64C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3-16C | THREADED SHAND ADAPTER DRILLS Ø 3/16” | 1 | |
| 02-2971-3/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2971-3/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2971-3/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-3/8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-5-16C | THREADED SHAND ADAPTER DRILLS Ø 5/16” | 1 | |
| 02-2971-5-32C | THREADED SHAND ADAPTER DRILLS Ø 5/12” | 1 | |
| 02-2971-5/16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-5/16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-5/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 2 | |
| 02-2971-5/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-7/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-7/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-9/32 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2971-9/32C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-10 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-10C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-11 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-11C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-16 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-16C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-20 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-20C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-21 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-21C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-27 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-27C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-30 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-30C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-40 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2972-40C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-D | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-DC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-F | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-FC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-G | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-GC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-J | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2973-JC | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-2,3C | THREADED SHANK ADAPTER DRILL | 1 | |
| 02-2974-2-3C | THREADED SHAND ADAPTER DRILLS Ø 2.3MM – 0.0906” | 1 | |
| 02-2974-2.3 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-2.3C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3,17 | THREADED SHANK ADAPTER DRILL | 1 | |
| 02-2974-3.17 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.17C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.96 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-3.96C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-4.76 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-4.76C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-6.35 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-6.35C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-8 | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-2974-8C | Threaded Shank Adapter Drills (Drill sizes: 1/4") (Decimal equivalent: .2500") (Add to cart: Add To Cart) (Drill sizes: 1/8") (Decimal equivalent: .1250") (Add to cart: Add To Cart) (Drill sizes: 17/64") (Decimal equivalent: .2656") (Add to cart: Contact | 1 | |
| 02-8014-4000 | JACKING ADAPTER (TRONAIR) | 1 | |
| 023498-000 | VENT VALVE ADAPTER FOR MS VALVES | 1 | |
| 024398-000 | VENT VALVE ADAPTER FOR MS VALVES | 5 | |
| 024399-000 | SAFT ADAPTER VENT VALVE | 1 | |
| 025098-000 | VENT VALVE ADAPTER FOR M8 VALVE (5IT) | 4 | |
| 026756-000 | VENT VALVE ADAPTER FOR CVH170KA | 1 | |
| 0885 | PITOT STATIC KIT ADAPTER LEARJET 40-45 | 1 | |
| 03038 | HYDRO-TEST ADAPTER - 1¼”-12 UNF | 1 | |
| 03610 | HYDRO-TEST ADAPTER - 1”-12 UNF | 1 | |
| 04482 | FILL ADAPTER - HANSEN QUICK CONNECT - 5/8” - 18 UNF | 1 | |
| 04485 | FILL ADAPTER - HANSEN QUICK CONNECT - 3/8”-24 UNF | 1 | |
| 05-001 | AERO Specialties 05-001 Nitrogen Inflating Valve Adapter - 3000 PSI | 2 | |
| 057-0852-29 | WRENCH ADAPTER SIZE 29 | 2 | |
| 061427 | 1/4" Hex Step Adapter (22, 20, 18mm) | 1 | |
| 061500 | 1/4" Hex Step Adapter (3/4, 11/16, 5/8 & 9/16) | 1 | |
| 061501 | 1/4" Hex Step Adapter (5/16, 3/8, 7/16 & 1/2) | 1 | |
| 061502 | 1/4" Hex Step Adapter (1/4, 7/32, 3/16, 1/8) | 1 | |
| 061503 | 1/4" Hex Step Adapter (19, 17, 16 & 14mm) | 1 | |
| 061504 | 1/4" Hex Step Adapter (13, 12, 11 & 10mm) | 1 | |
| 061505 | 1/4" Hex Step Adapter (9, 8, 7 & 6mm) | 1 | |
| 061506 | 1/4" Hex Step Adapter (5.5, 5, 4.5 & 4mm) | 1 | |
| 061524 | 3/8" Hex Step Adapter (3/4, 11/16, 5/8 & 9/16) | 1 | |
| 061525 | 3/8" Hex Step Adapter (1/2, 7/16, 3/8 & 5/16) | 1 | |
| 061527 | 1/4" Hex Step Adapter (1/2, 3/8, 1/4 & 1/8) | 1 | |
| 061528 | 1/4" Hex Step Adapter (8, 6, 4 & 2mm) | 1 | |
| 061529 | 1/4" Hex Step Adapter (9, 7, 5 & 3mm) | 1 | |
| 061530 | 3/8" Hex Step Adapter (1/4, 7/32, 3/16 & 1/8) | 1 | |
| 061531 | 3/8" Hex Step Adapter (9/16, 7/16, 5/16 & 3/16) | 1 | |
| 061537 | 3/8" Hex Step Adapter (1, 7/8, 3/4 & 5/8) | 1 | |
| 061538 | 3/8" Hex Step Adapter (5.5, 5, 4.5 & 4mm) | 1 | |
| 061539 | 3/8" Hex Step Adapter (9, 8, 7 & 6mm) | 1 | |
| 061540 | 3/8" Hex Step Adapter (13, 12, 11 & 10mm) | 1 | |
| 061541 | 3/8" Hex Step Adapter 1(6, 14, 12 & 10mm) | 1 | |
| 061542 | 3/8" Hex Step Adapter (17, 15, 13 & 11mm) | 1 | |
| 061543 | 3/8" Hex Step Adapter (19, 17, 16 & 14mm) | 1 | |
| 061559 | 3/8" Hex Step Adapter (1 1/4, 1 1/8, 1 1/16 & 1") | 1 | |
| 061630 | 1/4" Hex Step Adapter (1/4, 7/32, 3/16 & 5/32) | 1 | |
| 07-10-03 | HONDA JET JACK PAD ADAPTER KIT | 1 | |
| 07-3006-6900 | FUEL SAMPLING KIT WITH ADAPTER BITS | 12 | |
| 07-4001-EX | EXTENSION SHANK ADAPTER PN: 07-4001-EX | 1 | |
| 07-5187 | Squeezer Set Adapter (Set hole: .187") (Overall length: 5" (127 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-70407 | Shank Adapter (For use with: .401 Shank Sets) (Overall length: 4-1/2" (114 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-99705 | Shank Adapter Sleeve (Accepts: .401" Shank Sets) (Add to cart: Add To Cart) | 1 | |
| 071-06010-0000 | SPLINE ADAPTER | 3 | |
| 071-06021-0002 | KFC225 TEST STAND ADAPTER PIN | 1 | |
| 071-06021-0003 | KFC225 TEST STAND ADAPTER HUB | 1 | |
| 08-0704-4000 | PROPELLER TORQUE ADAPTER TOOL | 4 | |
| 08-100 | TUBULAR HAND SETTER ADAPTER FLARING,STRIKING | 2 | |
| 08-2021-0000 | ENGINE BUILD UP DOLLY (EGINE ADAPTER NOT INCLUDED) | 3 | |
| 08-2034-0010 | STAND: ENGINE,WORK,UNIV, NEED ADAPTER KIT | 2 | |
| 0884EE | SPL-5292 ADAPTER - PROBE PITOT STATIC | 1 | |
| 0AT-2193 | OUTLINE ADAPTER SQUARE DRIVE CLUTCH SET RUN IN | 1 | |
| 0U141830 | TORQUE WRENCH ADAPTER PISTON NUT | 1 | |
| 1.325-066 | UAS-WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 1.325-112 | UAS-WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 1.325.010 | UAS - WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 1.325.053 | UAS - WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 1.325.066 | UAS - WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 1.325.112 | UAS - WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 1.325.117 | UAS - WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 1.325.177 | UAS - WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 1.325.239 | UAS - WHEEL ADAPTER RING FOR B787 NLG | 1 | |
| 1.325.275 | UAS - WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 10-001 | THREADED SHANK ADAPTER DRILLS | 1 | |
| 10-003 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-008 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-010 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 4 | |
| 10-011 | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-011 | 1 | |
| 10-013 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-016 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-020 | THREADED SHANK ADAPTER DRILL | 2 | |
| 10-021 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-023 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-028 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-030 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-031 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-036 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-040 | THREADED SHANK ADAPTER DRILL | 3 | |
| 10-046 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-051 | THREADED SHANK ADAPTER DRILLS #51 | 2 | |
| 10-052 | THREADED SHANK ADAPTER DRILLS #52 | 1 | |
| 10-053 | THREADED SHANK ADAPTER DRILLS #53 | 4 | |
| 10-054 | THREADED SHANK ADAPTER DRILLS #54 | 1 | |
| 10-055 | THREADED SHANK ADAPTER DRILLS #55 | 2 | |
| 10-056 | THREADED SHANK ADAPTER DRILLS #56 | 3 | |
| 10-057 | THREADED SHANK ADAPTER DRILLS #57 | 1 | |
| 10-058 | THREADED SHANK ADAPTER DRILLS #58 | 3 | |
| 10-059 | THREADED SHANK ADAPTER DRILLS #59 | 2 | |
| 10-060 | THREADED SHANK ADAPTER DRILLS #60 | 1 | |
| 10-140 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-203 | THREADED SHANK ADAPTER DRILL | 2 | |
| 10-208 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-210 | THREADED SHANK ADAPTER DRILL | 5 | |
| 10-213 | THREADED SHANK ADAPTER DRILL | 2 | |
| 10-216 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-220 | THREADED SHANK ADAPTER DRILL | 3 | |
| 10-221 | THREADED SHANK ADAPTER DRILL | 2 | |
| 10-223 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-228 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-230 | THREADED SHANK ADAPTER DRILL | 4 | |
| 10-231 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
| 10-234501-000 | JACK ADAPTER PAD | 1 | |
| 10-236 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-240 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-246 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-303 | THREADED SHANK ADAPTER DRILL | 4 | |
| 10-304 | THREADED SHANK ADAPTER DRILL #D | 1 | |
| 10-308 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-310 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-3106-0001 | RAM / RELAY ADAPTER MODULE | 1 | |
| 10-312 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-313 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-316 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-320 | THREADED SHANK ADAPTER DRILL | 2 | |
| 10-321 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-328 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-330 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-331 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
| 10-336 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-340 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-346 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
| 10-400-0192 | ADAPTER CASE BOLT ADAPTER (SET OF 8) - 3X699 | 1 | |
| 10-405 | THREADED SHANK ADAPTER DRILLS #5 | 1 | |
| 10-408 | THREADED SHANK ADAPTER DRILLS #8 | 2 | |
| 10-410 | THREADED SHANK ADAPTER DRILL | 4 | |
| 10-411 | THREADED SHANK ADAPTER DRILLS #11 | 1 | |
| 10-412 | THREADED SHANK ADAPTER DRILLS #12 | 1 | |
| 10-413 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-416 | THREADED SHANK ADAPTER DRILLS #16 | 1 | |
| 10-420 | THREADED SHANK ADAPTER DRILLS #20 | 1 | |
| 10-421 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-427 | THREADED SHANK ADAPTER DRILLS #27 | 1 | |
| 10-430 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10-440 | THREADED SHANK ADAPTER DRILL | 1 | |
| 10.051 | THREADED SHANK ADAPTER DRILLS #51 | 2 | |
| 10.052 | THREADED SHANK ADAPTER DRILLS #52 | 1 | |
| 10.053 | THREADED SHANK ADAPTER DRILLS #53 | 4 | |
| 10.054 | THREADED SHANK ADAPTER DRILLS #54 | 1 | |
| 10.055 | THREADED SHANK ADAPTER DRILLS #55 | 2 | |
| 10.056 | THREADED SHANK ADAPTER DRILLS #56 | 3 | |
| 10.057 | THREADED SHANK ADAPTER DRILLS #57 | 1 | |
| 10.058 | THREADED SHANK ADAPTER DRILLS #58 | 3 | |
| 10.059 | THREADED SHANK ADAPTER DRILLS #59 | 2 | |
| 10.06 | THREADED SHANK ADAPTER DRILLS #60 | 1 | |
| 10034 | CABLE ADAPTER 7310 | 3 | |
| 1004755 | TUBE ADAPTER MALEMALE | 1 | |
| 1004756 | TUBE ADAPTER FEMALEFEMALE | 1 | |
| 1006767 | TORQUE ADAPTER KIT, 3/8 INCH DRIVE | 1 | |
| 1006772 | Pylon Torque Adapter Kit | 2 | |
| 1006776 | MLG Torque Adapter Kit | 2 | |
| 10008758 | VALVE STEM ADAPTER (INTERNAL LEAKAGE AND OPEN/CLOSE TORQUE TESTS) AVOX SYSTEMS (SAFRAN). | 1 | |
| 101-00100 | Static Port Adapter kit | 7 | |
| 101-00100 | BARFIELD STATIC PORT ADAPTER | 7 | |
| 101-00300 | Fuel Quantity Adapter Module for ANY | 1 | |
| 101-00301 | Fuel Quantity Adapter Module for Lockheed L-188 | 1 | |
| 101-00302 | Fuel Quantity Adapter Module for Fairchild F-27F, F-27J | 1 | |
| 101-00303 | Fuel Quantity Adapter Module for Bell AH-1 | 1 | |
| 101-00304 | Fuel Quantity Adapter Module for Swearingen SA 226 | 1 | |
| 101-00305 | Fuel Quantity Adapter Module for ANY | 1 | |
| 101-00306 | Fuel Quantity Adapter Module for Dehavilland DHC-6 | 5 | |
| 101-00307 | Fuel Quantity Adapter Module for Dehavilland DHC-6 | 4 | |
| 101-00309 | Fuel Quantity Adapter Module for Beech Consolidated | 1 | |
| 101-00310 | Fuel Quantity Adapter Module for Bell 214 | 1 | |
| 101-00313 | Fuel Quantity Adapter Module for Fairchild F-27, F-27J | 1 | |
| 101-00314 | Fuel Quantity Adapter Module for Beech 99 | 1 | |
| 101-00315 | Fuel Quantity Adapter Module for Bell 204B, 205A, UH-1F | 1 | |
| 101-00316 | Fuel Quantity Adapter Module for Gulfstream Gll | 1 | |
| 101-00317 | Fuel Quantity Adapter Module for Gulfstream Gl | 1 | |
| 101-00318 | Fuel Quantity Adapter Module for Falcon 20 | 1 | |
| 101-00320 | Fuel Quantity Adapter Module for Shorts SD3-30, SD3 -60 | 1 | |
| 101-00322 | Fuel Quantity Adapter Module for Convair CV-580 | 1 | |
| 101-00323 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | 1 | |
| 101-00324 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | 1 | |
| 101-00325 | Fuel Quantity Adapter Module for Bell 212 | 3 | |
| 101-00326 | Fuel Quantity Adapter Module for Nord 262 | 1 | |
| 101-00327 | Fuel Quantity Adapter Module for Jetstar I (Main) and Jetstar II | 1 | |
| 101-00328 | Fuel Quantity Adapter Module for Jetstar I (Aux) and II | 1 | |
| 101-00329 | Fuel Quantity Adapter 101-00329 for Bell 206L | 1 | |
| 101-00330 | Fuel Quantity Adapter Module for Cessna 210, 337 | 1 | |
| 101-00331 | Fuel Quantity Adapter Module for Lear 24, 25, 35, 36 | 1 | |
| 101-00332 | Fuel Quantity Adapter Module for Cessna 310, 310Q | 1 | |
| 101-00333 | Fuel Quantity Adapter Module for Cessna 310, 310Q | 1 | |
| 101-00334 | Fuel Quantity Adapter Module for Cessna 500, 550 | 1 | |
| 101-00335 | Fuel Quantity Adapter Module for Cessna 500 | 1 | |
| 101-00336 | Fuel Quantity Adapter Module for Sikorsky S-58T | 1 | |
| 101-00338 | Fuel Quantity Adapter Module for Cessna 310Q, 310R, 335, 340, 340A, 402B, 141, 421B, 421C | 1 | |
| 101-00340 | Fuel Quantity Adapter Module for Hawker Siddeley 748 | 1 | |
| 101-00341 | Fuel Quantity Adapter Module for Rockwell Sabreliner | 1 | |
| 101-00401 | Fuel Quantity Adapter Module | 4 | |
| 101-00404 | Fuel Quantity Adapter Module for Cessna 401B, 402B, 414 | 1 | |
| 101-00405 | Fuel Quantity Adapter Module for Cessna 210, 337 | 1 | |
| 101-00411 | Fuel Quantity Adapter Module for Cessna 310Q, 310R, 335, 340, 340A, 402B, 414, 421B, 421C | 1 | |
| 101-00423 | Fuel Quantity Adapter Module for Cessna 500, 650, S550, 560 | 6 | |
| 101-00424 | Fuel Quantity Adapter Module for Cessna 550, S550, 560 | 5 | |
| 101-00425 | Fuel Quantity Adapter Module for Bell 205A-1 / UH1 | 5 | |
| 101-00426 | Fuel Quantity Adapter Module for Cessna 500 | 2 | |
| 101-00427 | Fuel Quantity Adapter Module for Falcon 10 | 1 | |
| 101-00428 | Fuel Quantity Adapter Module for Cessna 441 | 2 | |
| 101-00429 | Fuel Quantity Adapter Module for Cessna 441 | 6 | |
| 101-00430 | Fuel Quantity Adapter Module for Gulfstream Gll | 2 | |
| 101-00432 | Fuel Quantity Adapter Module for Falcon 20 | 2 | |
| 101-00433 | Fuel Quantity Adapter Module for Cessna 441 | 4 | |
| 101-00434 | Fuel Quantity Adapter Module for Gulfstream GII | 1 | |
| 101-00435 | Fuel Quantity Adapter Module for Cessna 402C, 404, 414A, 421C | 5 | |
| 101-00436A | Fuel Quantity Adapter Module for BAC-111 400 | 1 | |
| 101-00436B | Fuel Quantity Adapter Module for BAC-111 400 | 1 | |
| 101-00438 | Fuel Quantity Adapter Module for Lear 24, 25, 35, 36 | 8 | |
| 101-00439 | Fuel Quantity Adapter Module for Fairchild SA226, SA227 | 3 | |
| 101-00440 | Fuel Quantity Adapter Module for Douglas DC-9 | 1 | |
| 101-00442 | Fuel Quantity Adapter Module for Douglas DC-9 | 1 | |
| 101-00443 | Fuel Quantity Adapter Module for Boeing 727 | 1 | |
| 101-00444 | Fuel Quantity Adapter Module for Boeing 727 | 1 | |
| 101-00446 | Fuel Quantity Adapter Module for Beech C-90, E-90, A-100 | 4 | |
| 101-00448 | Fuel Quantity Adapter Module for Piper Cheyenne I and II | 3 | |
| 101-00451 | Fuel Quantity Adapter Module for IAI Westwind | 2 | |
| 101-00452 | Fuel Quantity Adapter Module for Falcon 50 | 1 | |
| 101-00453 | Fuel Quantity Adapter Module for Falcon 50 | 1 | |
| 101-00454 | Fuel Quantity Adapter Module for Falcon 50 | 1 | |
| 101-00456 | Fuel Quantity Adapter Module for Falcon 50 | 2 | |
| 101-00462 | Fuel Quantity Adapter Module for Lear 24, 25 | 1 | |
| 101-00465 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | 1 | |
| 101-00465/466 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | 1 | |
| 101-00466 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | 1 | |
| 101-00467 | Fuel Quantity Adapter Module for Embraer Bandeirante 110, 121 | 1 | |
| 101-00468 | Fuel Quantity Adapter Module for Hawker Siddeley 748 | 1 | |
| 101-00470 | Fuel Quantity Adapter Module for Swearingen Merlin IIIC, IVC, III | 2 | |
| 101-00471 | Fuel Quantity Adapter Module for Lear 28; 29; 31; 55 | 5 | |
| 101-00472 | Fuel Quantity Adapter Module for Casa 212 | 2 | |
| 101-00473 | Fuel Quantity Adapter Module for Cessna 650 | 1 | |
| 101-00474 | Fuel Quantity Adapter Module for Gulfstream GIII | 1 | |
| 101-00475 | Fuel Quantity Adapter Module for Boeing 720 | 1 | |
| 101-00476 | Fuel Quantity Adapter Module for Rockwell 690C, 690D, 695, 695A | 1 | |
| 101-00477A | Fuel Quantity Adapter Module for Beech Jet 400 | 2 | |
| 101-00477B | Fuel Quantity Adapter Module for Mitsubishi MU-300 (Fuselage Tank) | 2 | |
| 101-00479 | Fuel Quantity Adapter Module for BAE Jetstream 31 | 1 | |
| 101-00480 | Fuel Quantity Adapter Module for Fokker F-28 | 1 | |
| 101-00482 | Fuel Quantity Adapter Module for Rockwell Sabreliner | 2 | |
| 101-00483 | Fuel Quantity Adapter Module for Aerospatiale SA 365C | 1 | |
| 101-00484 | Fuel Quantity Adapter Module for Falcon 200 | 1 | |
| 101-00486 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-00487 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | 1 | |
| 101-00489 | Fuel Quantity Adapter Module for Beech Jet 400 | 1 | |
| 101-00491 | Fuel Quantity Adapter Module for Cessna 650 | 3 | |
| 101-00492 | Fuel Quantity Adapter Module for Falcon 900 | 1 | |
| 101-00493 | Fuel Quantity Adapter Module for Fokker F-28, 4000 | 1 | |
| 101-00494 | Fuel Quantity Adapter Module for Bell 406CS | 1 | |
| 101-00495 | Fuel Quantity Adapter Module for Falcon 900 | 1 | |
| 101-00496 | Fuel Quantity Adapter Module for Falcon 900 | 1 | |
| 101-00533 | Fuel Quantity Adapter Module for Airbus 300/B2/B4 | 1 | |
| 101-00542 | Fuel Quantity Adapter Module for Boeing 727, 737 | 1 | |
| 101-00543 | Fuel Quantity Adapter Module for Boeing 757, 767 | 10 | |
| 101-00547 | Fuel Quantity Indicator Adapter Cable for Boeing 101-00542 | 1 | |
| 101-00548 | Fuel Quantity Adapter Module for Boeing 757, 767 | 3 | |
| 101-00560 | Fuel Quantity Adapter Module for Cessna 560B | 6 | |
| 101-00561 | Fuel Quantity Adapter Module for Cessna 560B | 6 | |
| 101-00562 | Fuel Quantity Adapter Module for Boeing 737Â600/700/800 | 4 | |
| 101-00563 | Fuel Quantity Adapter Module for Boeing 727, Boeing 737 -Dig Tank | 1 | |
| 101-00624 | Fuel Quantity Adapter Module for Bell 212 | 1 | |
| 101-00625 | Fuel Quantity Adapter Module for Beech 400, 400A | 1 | |
| 101-00801 | Fuel Quantity Adapter Cable for Bell 214 St | 1 | |
| 101-00802 | Fuel Quantity Adapter Cable for Kingair E-90, 100, A-100, B-100, 200, B-200, 300, 350 | 9 | |
| 101-00802 (MOD C) | FUEL QUANTITY ADAPTER MODULE FOR BEECH 1900, 1900D, 1900C (S/N'S UA, UB, UCUE) | 1 | |
| 101-00802 (Mod C) | Fuel Quantity Adapter Module for Beech 1900, 1900D, 1900C (S/N's UA, UB, UC or UE) | 1 | |
| 101-00805 | DC400 Adapter Module | 2 | |
| 101-00807 | Barfield 101-00807 Fuel Quantity Adapter Module, For Bell Helicopter | 4 | |
| 101-00808 | Fuel Quantity Adapter Module for DHC-8 | 7 | |
| 101-00808 (MOD A) | FUEL QUANTITY ADAPTER MODULE FOR DHC-8 | 1 | |
| 101-00808 (Mod A) | Fuel Quantity Adapter Module for DHC-8 | 1 | |
| 101-00808MODA | FUEL QUANTITY ADAPTER MODULE FOR DHC-8 | 1 | |
| 101-00809 | Fuel Quantity Adapter Module for SAAB Fairchild | 2 | |
| 101-00814 | Probe Adapter Cable for King Air | 9 | |
| 101-00817 | B1900 Test Adapter Module/101-00802/Beech Plastic to DIN Connectors | 7 | |
| 101-00821 | Fuel Quantity Adapter Module for Piper Cheyenne IV | 1 | |
| 101-00822 | Fuel Quantity Adapter Module for Embraer EMB-120 | 1 | |
| 101-00826 | Fuel Quantity Adapter Module for Piper Cheyenne IIIA | 1 | |
| 101-00827 | PROBES ADAPTER CABLE | 3 | |
| 101-00829 | A. PROBE ADAPTER CABLE | 2 | |
| 101-00831 | Fuel Quantity 1900 Adapter Cable | 6 | |
| 101-00854 | Fuel Quantity Adapter Module for Jetstream 32 | 1 | |
| 101-00855 | Fuel Quantity Adapter Cable for BAE 125-800 | 3 | |
| 101-00856 | Fuel Quantity Adapter Module for Canadair Challenger | 1 | |
| 101-00857 | Fuel Quantity Adapter Module for BAE 125-800 | 1 | |
| 101-00865 | Fuel Quantity Adapter Module for Jetstream 41 | 2 | |
| 101-00866 | Fuel Quantity Adapter Module for BAE 1000 | 2 | |
| 101-00874 | Fuel Quantity Adapter Module for DHC-8 | 9 | |
| 101-00876 | Fuel Quantity Adapter Module for DHC-8 | 8 | |
| 101-00877 | Fuel Quantity Adapter Module for Swearingen SJ30Â2 | 1 | |
| 101-00878 | PIPER MERIDIAN ADAPTER FOR DC400A | 3 | |
| 101-00902 | TT1000A ADAPTER CABLE | 3 | |
| 101-00907 | LEAD ADAPTER (TOOLING). | 10 | |
| 101-01175 | PITOT STATIC TEST SET WITH ADAPTER AND HOSES | 9 | |
| 101-01190 | Fuel Quantity Adapter Module for Cessna 500, 550, S550, 560 | 1 | |
| 101-01421 | Fuel Quantity Adapter Module for Sikkorsky Blackhawk S-70, UH-60 | 3 | |
| 101-01422 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01423 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01424 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01425 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01426 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
| 101-01427 | Fuel Quantity Adapter Module for ATR 42 / 72 | 1 | |
| 101-01428 | Fuel Quantity Adapter Module for ATR 42 / 72 | 1 | |
| 101-01429 | Fuel Quantity Adapter Module for ATR 42 / 72 | 1 | |
| 101-01431 | Fuel Quantity Adapter Module for Aerospatiale HH65A, SA365N, AS366G | 1 | |
| 101-01432 | Fuel Quantity Adapter Module for Aerospatiale HH65A, SA365N, AS366G | 1 | |
| 101-01434 | Fuel Quantity Adapter Module for Gulfstream GIV | 4 | |
| 101-01437 | Fuel Quantity Adapter Module for Cessna 650 | 4 | |
| 101-01439 | Fuel Quantity Adapter Module for Gulfstream GIII | 1 | |
| 101-01441 | Fuel Quantity Adapter Module for Canadair CL215 T, CL415 | 3 | |
| 101-01442 | Fuel Quantity Adapter Module for Canadair CL215 T, CL415 | 3 | |
| 101-01445 | Fuel Quantity Adapter Module for MC Donnell Douglas AH-64A | 1 | |
| 101-01446 | Fuel Quantity Adapter Module for Nord 262 | 1 | |
| 101-01447 | Fuel Quantity Adapter Module for Cessna 425 | 2 | |
| 101-01450 | Fuel Quantity Adapter Module for Nord 262 (Honeywell) | 1 | |
| 101-01456 | Fuel Quantity Adapter Module for American Eurocopters MBB-BK117 | 2 | |
| 101-01463 | Fuel Quantity Adapter Module for Lear 31 | 5 | |
| 101-01464 | Fuel Quantity Adapter Module for ATR 42 / 72 | 5 | |
| 101-01465 | Fuel Quantity Adapter Module for ATR 42 / 72 | 6 | |
| 101-01466 | Fuel Quantity Adapter Module for ATR 42 / 72 | 5 | |
| 101-01467 | Fuel Quantity Adapter Module for ATR 42 / 72 | 5 | |
| 101-01468 | Fuel Quantity Adapter Module for Lear 60 | 3 | |
| 101-01520 | Fuel Quantity Adapter Module for Boeing 747-100, 747-200 | 1 | |
| 101-01536 | Fuel Quantity Adapter Module for Gulfstream V (GV) | 4 | |
| 101-01613 | Fuel Quantity Adapter Module for Lockheed C130 | 1 | |
| 101-2460 | HSS STUBBY SIZE D THREADED SHANK ADAPTER DRILL | 1 | |
| 101-380091-1/935 | CALIBRATION ADAPTER TEST BOX (MEGGITT) | 1 | |
| 101-380091-2/939 | CALIBRATION ADAPTER NITROGEN SUPPLY HOSES (BEECHCRAFT CORP) | 2 | |
| 101-384028-1 | TEST BOX AND ADAPTER HARNESS BAROMETRIC PRESSURE SWITCH | 1 | |
| 101-384028/935 | BAROMETRIC PRESS. SWITCH TEST BOX AND ADAPTER HARN | 1 | |
| 10160-1 | DOUBLE INT ADAPTER NON-POLORIZED | 1 | |
| 102-00902 | Turbine Temperature Adapter Cables for CF6-80A, A1, A2 engine | 5 | |
| 102-00903 | Turbine Temperature Adapter Module for CF6 and CF6-50 engine | 1 | |
| 102-009251 | WESTLAND LYNX INDICATOR ADAPTER CABLE KIT | 1 | |
| 102-009271 | 009271 LEWIS INDICATOR ADAPTER CABLE KIT | 1 | |
| 102-1935 | HSS SHORT SIZE 10 THREADED SHANK ADAPTER DRILL, 1-1/4" OAL | 1 | |
| 103-1362 | HSS LONG SIZE 5/32 THREADED SHANK ADAPTER DRILL | 1 | |
| 103-1875 | HSS LONG SIZE 3/16 THREADED SHANK ADAPTER DRILL | 1 | |
| 103-2500 | HSS LONG SIZE 1/4 THREADED SHANK ADAPTER DRILL | 1 | |
| 10370-11 | TORQUE ADAPTER WRENCH | 1 | |
| 10533225 | JEPPESEN SKYBOUND G2 ADAPTER (GARMIN) | 1 | |
| 1087-3010-FA-00 | 206/407/TH-67 ADAPTER KIT | 1 | |
| 109-3130-34-1 | TAIL ROTOR HUB BUSHING INSTALLATION ADAPTER [PUSHER IS PART OF THE TOOL (LSE NO 129)] | 1 | |
| 109-3401-70-115 | ROTOR BRAKE ADAPTER RING NUT REMOVE/INSTALL TOOLS | 1 | |
| 109-3900-89-101 | HYDRAULIC JACKS AND ADAPTER BN HELICOPTERS | 1 | |
| 109382-35-1-TA | TEST ADAPTER (2 ITEMS) | 1 | |
| 10A22000-001 | FWD JACK ADAPTER SET | 1 | |
| 10C1016 | FIXTURE, ADAPTER - COMPR ROTOR | 1 | |
| 10C1016P01 | Fixture, Adapter - Compressor Rotor Locking Lug | 1 | |
| 10C1137 | KIT, ADAPTER - HYDRAULIC PUMP | 1 | |
| 10C1137G01 | KIT, ADAPTER - HYDRAULIC PUMP | 2 | |
| 10M-9322 | MD90 Pneumatic adapter fitting kit (10 pieces) | 1 | |
| 11-105 | THREADED SHANK ADAPTER DRILL | 2 | |
| 11-107 | COBALT THREADED SHANK ADAPTER DRILL 1/4" - 28 | 2 | |
| 11-109 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (3/16) | 3 | |
| 11-111 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (7/32) | 1 | |
| 11-113 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/4) | 1 | |
| 11-20-0947 | IDT - Manual - Adapter Kit | 1 | |
| 11-205 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/8) | 1 | |
| 11-207 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (5/32) | 2 | |
| 11-209 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (3/16) | 1 | |
| 11-21-9507 | Manual Press with Ferrule Adapter Kit | 1 | |
| 11-21-9933 | IDT - Manual - Adapter Kit | 1 | |
| 11-211 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (7/32) | 1 | |
| 11-213 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/4) | 1 | |
| 11-305 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/8) | 1 | |
| 11-307 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (5/32) | 2 | |
| 11-309 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (3/16) | 1 | |
| 11-31-1570 | IDT - Manual - Adapter Kit | 1 | |
| 11-31-2176 | IDT - Manual - Adapter Kit | 1 | |
| 11-31-3337 | IDT - Manual - Adapter Kit | 1 | |
| 11-31-7559 | IDT - Manual - Adapter Kit | 1 | |
| 11-313 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/4) | 2 | |
| 11-413 | THREADED SHANK ADAPTER DRILL | 1 | |
| 11-88303-1 | TORQUE ADAPTER FOR A/C P750 | 1 | |
| 110601212-01 | ATSU/FDIMU Adapter Cable (Airbus) | 1 | |
| 110602003-00 | DATA LOADER ADAPTER CABLE | 7 | |
| 110602005-01 | PDL INTERFACE CABLE -603 ADAPTER CABLE | 2 | |
| 110602020-50 | PDL/MSD/EFB ADAPTER CABLE, 10 FT. | 3 | |
| 110602024-54 | PDL MSD ADAPTER CABLE | 1 | |
| 110602026-56 | PDL/Ethernet Adapter Cable (RJ45/115VAC) | 1 | |
| 1106769-2 | Generator Spline Adapter Removal | 1 | |
| 1106769-2PM | GENERATOR SPLINE ADAPTER REMOVAL | 1 | |
| 1106769-4 | VESPEL SPLINE ADAPTER WITHDRAWAL TOOL | 5 | |
| 1106769-4PM | VESPEL SPLINE ADAPTER WITHDRAWAL TOOL | 1 | |
| 1106841-1 | VESPEL SPLINE ADAPTER INSTALLATION TOOL | 5 | |
| 115-00057 | Pitot Test Adapter / Surgical Tubing with AN-4 Fitting | 4 | |
| 11524A | CONNECTOR ADAPTER APC-7 TO TYPE N-(F) | 2 | |
| 1159C40103-01-02-BSP | TORQUE ADAPTER SPANNER WRENCH | 1 | |
| 1159GSE20006-5 | SPLINE ADAPTER INSTALLATION TOOL | 2 | |
| 1159GSE20006-7 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| 1159GSE40214-7 | JACK ADAPTER AXLE G450 | 2 | |
| 1159GSE50214-3 | Main Axle Jack Adapter for G550 | 4 | |
| 1159GSE50258-3 | GPWS DIAGNOSTIC ADAPTER CABLE | 1 | |
| 1159GSE50291-3 | IDG Servicing Adapter Hose Assembly | 3 | |
| 1159GSE50293-1 | BUSHING ASSY-JACKING ADAPTER MLG | 2 | |
| 1159SEAV30099-101 | FUEL ADAPTER HARNESS TESTER | 1 | |
| 1159SEFL20282-1 | BRAKE BLEED ADAPTER ASSEMBLY | 2 | |
| 1159SEFL20284-1 | WING FUEL TANK PNEUMATIC ADAPTER ASSEMBLY | 1 | |
| 1159SEM30001-11 | JACK PAD ADAPTER | 2 | |
| 1159SEP30100-5 | SPLINE ADAPTER INSTALLATION TOOL | 2 | |
| 1159SEP30101-3 | Spline Adapter Removal Tool | 2 | |
| 1159SEP30110-1 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| 1159SEP30110-3 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| 1159SEP40000-1 | HOPPER DOOR ADAPTER (LEFT) | 1 | |
| 1159SEP40000-2 | HOPPER DOOR ADAPTER (RIGHT) | 1 | |
| 1159SEP40001-1 | WING ACCESS COVER ADAPTER (INBOARD) | 1 | |
| 1159SEP40002-1 | WING ACCESS COVER ADAPTER (OUTBOARD) | 1 | |
| 1159SEP40004-23 | VALVE ADAPTER ASSY | 1 | |
| 116-03489 | TELESCOPING ANTENNA ADAPTER FOR TRIPOD | 1 | |
| 116-0349 | TELESCOPING ANTENNA ADAPTER FOR TRIPOD | 1 | |
| 11878A | KEYSIGHT-AGILENT 11878A ADAPTER KIT | 1 | |
| 11B71-11342 | TOOL, ADAPTER B757, WET MOTOR | 1 | |
| 11C3114 | GRIND - ADAPTER - HP COMPR ROTOR-SEAL ROTATING | 1 | |
| 11C3114G05 | GRIND, ADAPTER - HPC ROTOR - SEAL ROTATING | 1 | |
| 11C4429G01 | SPL-10042 - ADAPTER - LOCKING, AGB | 1 | |
| 11C4843 | BORESCOPE ADAPTER KIT | 1 | |
| 11C4843G02 | GENX FOAM BSI ADAPTER KIT | 1 | |
| 11MIT65B01231-1 | TORQUE ADAPTER - RESTRICTOR SUPPORT TUBE, BODY LANDING GEAR | 1 | |
| 12-04869 | OXYGEN CHARGE FILL ADAPTER 300 BEND | 1 | |
| 12-04870 | O2 CHARGE FILL ADAPTER WITH DUST CAP | 1 | |
| 12-8006-16 | Bowers 12-8006-16 Kroeplin Bluetooth Interface Adapter for 12-G005 + 12-G010 | 1 | |
| 120-33701-005 | Tripod Jack Adapter Nose | 3 | |
| 1206GS | SET ADAPTER COMBINAT | 6 | |
| 120−431−001 | 220V ac Adapter − Data Bus Tester (Optional) | 1 | |
| 1213563-1 | DAHT ADAPTER ASSEMBLY | 1 | |
| 1213655-1 | T-HEAD ADAPTER ASSEMBLY | 1 | |
| 12145-021-001 | FWD ENGINE BEAM JACK ADAPTER TOOL | 1 | |
| 121666-001 | OUTPUT CABLE ADAPTER (QUICK DISCONNECT) FOR CHRISTIE AUTOMATIC REFLEX CHARGER/ANALYZER | 3 | |
| 121666-002 | UNIVERSAL OUTPUT CABLE ADAPTER | 1 | |
| 132.5010 | WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 132.5053 | WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 132.5066 | WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 132.5067 | WHEEL ADAPTER RINGS | 1 | |
| 132.5068 | NLG ADAPTER RING | 1 | |
| 132.5079 | KUNZ ADAPTER RINGS FOR A320 | 1 | |
| 132.5084 | KUNZ ADAPTER RINGS FOR A321 | 1 | |
| 132.5112 | WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 132.5117 | WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 132.5177 | WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 132.5239 | WHEEL ADAPTER RING FOR B787 NLG | 1 | |
| 132.5275 | WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 132.5312 | WHEEL ADAPTER RING FOR 3-1720 | 1 | |
| 132.5313 | WHEEL ADAPTER RING FOR 3-1701 | 1 | |
| 1013.5 | REAR FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 2 | |
| 1014.5 | NOSE FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 3 | |
| 1062 | COM-15047 ADAPTER - SNAP ON CONNECTOR, SC | 3 | |
| 1388 | CABLE ASSY, ADAPTER (EC135 & EC145T2) | 1 | |
| 10113 | TORQUE ADAPTER (BEECHCRAFT CORP) | 15 | |
| 10390 | PRO BALANCE ADAPTER CABLE | 1 | |
| 11001 | TORQUE ADAPTER LOWER FORWARD WING (3 ELEMENT) | 13 | |
| 11093 | SHANK ADAPTER DRILLS | 1 | |
| 13029 | OFFSET DRILL ATTACHMENT PANCAKE ADAPTER SHORT | 1 | |
| 14811 | BRUSH BLOCK ADAPTER Y CABLE (1 PER ENGIN | 1 | |
| 101065 | Nozzle Port Adapter Pump, Fuel | 1 | |
| 120031 | CM-17 SL Hd Adapter 1/4 (Qty 10) | 1 | |
| 120032 | CMP-20 Phil Hd Adapter #1 (Qty 10) | 1 | |
| 120033 | CMP-21 Phil Hd Adapter #2 (Qty 10) | 1 | |
| 120034 | CM-24 Sq Dr Adapter 1/4 (Qty 10) | 1 | |
| 120035 | CM-25 SL Hd Adapter 3/16 (Qty 10) | 1 | |
| 120036 | CMS-6 Hex Hd Adapter 3/32 (Qty 10) | 1 | |
| 120037 | CMS-7 Hex Hd Adapter 7/64 (Qty 10) | 1 | |
| 120038 | CMS-9 Hex Hd Adapter 9/64 (Qty 10) | 1 | |
| 120039 | CMS-10 Hex Hd Adapter 5/32 (Qty 10) | 1 | |
| 120040 | CMS-40 Hex Hd Adapter 1.5mm (Qty 10) | 1 | |
| 120041 | CMS-41 Hex Hd Adapter 2.0mm (Qty 10) | 1 | |
| 120042 | CMS-42 Hex Hd Adapter 2.5mm (Qty 10) | 1 | |
| 120043 | CMS-43 Hex Hd Adapter 3.0mm (Qty 10) | 1 | |
| 120044 | CMS-44 Hex Hd Adapter 4.0mm (Qty 10) | 1 | |
| 120045 | CMS-45 Hex Hd Adapter 5.0mm (Qty 10) | 1 | |
| 120069 | T-20 Torx Type Adapter (Qty 5) | 1 | |
| 120142 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 1" Oal) | 1 | |
| 120143 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 2" Oal) Pin Type | 1 | |
| 120144 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 3" Oal) | 1 | |
| 120146 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 6" Oal) | 1 | |
| 120147 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 8" Oal) | 1 | |
| 120148 | Square Dr. Adapter (3/8 Sq. Dr x 1/4 Hex x 2" Oal) | 1 | |
| 120149 | Square Dr. Adapter (3/8 Sq. Dr x 1/4 Hex x 3"L) Pin Type | 1 | |
| 120225 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 1 3/8 Oal) | 1 | |
| 120315 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 2" Oal) Ball Type | 1 | |
| 120366 | CMS-3 Hex Type Adapter .050 (Qty 10) | 1 | |
| 120367 | CMS-4 Hex Type Adapter 1/16 (Qty 10) | 1 | |
| 120368 | CMS-5 Hex Type Adapter 5/64 (Qty 10) | 1 | |
| 120369 | CMS-8 Hex Type Adapter 1/8 (Qty 10) | 1 | |
| 120370 | CMS-12 Hex Type Adapter 3/16 (Qty 10) | 1 | |
| 120371 | CMS-14 Hex Type Adapter 7/32 (Qty 10) | 1 | |
| 120372 | CMS-16 Hex Type Adapter 1/4 (Qty 10) | 1 | |
| 120373 | CMS-18 Hex Type Adapter 5/16 (Qty 10) | 1 | |
| 120374 | CM-26 Sl Head Adapter 7/32 (Qty 10) | 1 | |
| 120375 | CM-19 Sl Head Adapter 3/8 (Qty 10) | 1 | |
| 120376 | CMP-33 Phil Adapter #3 (Qty 10) | 1 | |
| 120377 | CM-37 Reed & Prince Adapter (Qty 10) | 1 | |
| 120413 | T-30 Torx Type Adapter (Qty 5) | 1 | |
| 120504 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 4" Oal) Pin Type | 1 | |
| 121033 | T-25 Torx Type Adapter (Qty 5) | 1 | |
| 122504 | Square Dr. Adapter (1/4 Sq. Dr x 1/4 Hex x 4" Oal) | 1 | |
| 1233-303 | F. LAN ADAPTER LANTORONIX | 1 | |
| 124-3416 | LEMO STRAIGHT 50 OHMS RF ADAPTER BNC PLUG | 1 | |
| 124044/B | 1 4MM ADAPTER BLACK | 1 | |
| 124044/R | 4MM ADAPTER RED | 1 | |
| 125-0441 | TEST SET ADAPTER (AUTRONICS CORPORATION) | 1 | |
| 12545-069-002 | PRESSURIZATION ADAPTER KIT | 1 | |
| 12845-575-005 | CONNECTION ADAPTER HARNESS | 2 | |
| 12860-921-003 | FUEL QUANTITY TEST ADAPTER BOX | 1 | |
| 12A1005-3 | FUEL DRAIN ADAPTER ASSEMBLY | 1 | |
| 12A2203-1 | PRESSURE CHECK ADAPTER ASSEMBLY | 1 | |
| 12AA221 | 8MM ADAPTER FOR MAGNETIC STAND (FOR MITUTOYO SURFTEST SJ-210 SURFACE ROUGHNESS TESTER CODE: 178-560-01D S/N: 614031811) | 1 | |
| 12BAK728 | SURFTEST SJ-210 POWER ADAPTER CORD SET | 1 | |
| 12ME65B00713 | REAR ADAPTER AND YOKE - ENGINE HANDLING | 1 | |
| 12ME65B02000 | TORQUE ADAPTER INBOARD TRAILING EDGE FLAP, MAIN CARRIAGE | 11 | |
| 130-380042-1/935 | CALIBRATION ADAPTER TEST BOX | 2 | |
| 130-380091-2/939 | CALIBRATION ADAPTER SUPPLY HOSES | 1 | |
| 132-120022-3 | WING JACK ADAPTER PAD | 2 | |
| 134-03428-402 | TRIPOD JACK ADAPTER MAIN - RIGHT | 1 | |
| 134910-11 | FUEL QUANTITY ADAPTER KIT | 1 | |
| 135-03428-401 | Tripod Jack Adapter Main | 3 | |
| 135-03428-402 | TRIPOD JACK ADAPTER MAIN | 1 | |
| 13822-00 | REGULATOR TEST ADAPTER AVOX SYSTEMS (SAFRAN) | 3 | |
| 1397-1500-001 | ODOMETER ADAPTER BOX | 1 | |
| 13P44-1F1 | outlet port adapter (2IT) | 1 | |
| 13P44-1F1-1 | intel port adapter (2IT) | 1 | |
| 14-6801-0120 | TIRE BEAD BRAKER MODEL 14-6801-0120 (TRONAIR) MUST INCLUDE MLW ADAPTER RING Z-1063-17 AND NLW ADAPTER RING Z-1064-10 | 12 | |
| 14-6805-6010 | Nitrogen filling adapter Tronair | 20 | |
| 14-GCM6913 | AC Adapter for U-2 Interface, Scout II, RS232C converter (24VDC 1A) | 1 | |
| 140660 | 140660;ADS-B;3rd PARTY ADAPTER DRIVERS;PROGRAM | 1 | |
| 140901GPA | AW 169 PITOT SYSTEM STATIC TEST ADAPTER KIT | 1 | |
| 144317 | Vacuum Adapter Stainless Steel (18mm) | 1 | |
| 144318 | Vacuum Adapter (for CL-2000 & SS2000) | 1 | |
| 144319 | Vacuum Adapter (18mm) | 1 | |
| 144322 | Vacuum Adapter (31mm) | 1 | |
| 144323 | Hios Right Angle Adapter (CL, A & SS-Series) | 1 | |
| 144327 | Drive Adapter (4mm Hios Dr. to 1/4 F/Hex Dr.) | 1 | |
| 144328 | Drive Adapter (1/4 M/Hex Dr. to 4mm Hios Dr.) | 1 | |
| 144332 | Drive Adapter (5mm Hios Dr. to 1/4 F/Hex Dr.) | 1 | |
| 144337 | Drive Adapter (1/4 M/Hex Dr. to 5mm Hios Dr.) | 1 | |
| 144338 | Vacuum Adapter (for BL-5000) | 1 | |
| 144342 | Push-to-Start Adapter (CL & SS 4000 and A4500-5000) | 1 | |
| 144345 | Vacuum Adapter (for BL-3000) | 1 | |
| 144346 | Vacuum Adapter (for BL-7000) | 1 | |
| 144356 | Vacuum Adapter for VZ-Series | 1 | |
| 144365 | Hios Right Angle Adapter - 1/4 F/Hex models (for VZ1820, VZ3012, VB1820 & VB3012) | 1 | |
| 145-2SF | AMPHENOL ADAPTER FOR EDDY CURRENT MACHINE | 1 | |
| 145612 | Vacuum Adapter (for BF060, BF080, BF120, EF080, EF120 & EF180 with 4mm HIOS Drive) | 1 | |
| 145618 | Vacuum Adapter (for BF060, BF080, BF120, EF080, EF120 & EF180 with ¼ F/Hex Drive) | 1 | |
| 145653 | Vacuum Adapter (for BF035, BF045, EF035, EF040 & EF055 models) | 1 | |
| 145867 | Right Angle Adapter Kit (for NF150 & NF220) | 1 | |
| 145868 | Right Angle Adapter Kit (for NF450) | 1 | |
| 145959 | Vacuum Adapter (for for BFA060, BFA080, BFA120 with 1/4 F/Hex Dr.) | 1 | |
| 145960 | Vacuum Adapter (for BFA060, BFA080, BFA120 with 4mm Hios Dr.) | 1 | |
| 145971 | Vacuum Adapter (for NFA-Series) | 1 | |
| 145972 | Vacuum Adapter (for NF150 & 220) | 1 | |
| 145973 | Vacuum Adapter (for NF450) | 1 | |
| 145979 | Right Angle Adapter Kit (for HD220 & HD450) | 1 | |
| 145981 | Right Angle Adapter Kit (for YF-Series) | 1 | |
| 145988 | Right Angle Adapter Kit (for HF-Series) | 1 | |
| 145989 | Right Angle Adapter Kit (for HD100N) | 1 | |
| 145993 | Right Angle Adapter Kit for HD450 _x000D_ | 1 | |
| 145G0115-1 | TORQUE ADAPTER - VERT | 1 | |
| 14836A | JIFFY AIR TOOL PANCAKE ADAPTER (OR EQUIVALENT) | 1 | |
| 14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 7 | |
| 14PF465KF1001 | SPLINE ADAPTER –TORQUE TUBE | 7 | |
| 14PF465KIT | SPLINE ADAPTER - TORQUE TUBE | 2 | |
| 14PF465TOOL | ADAPTOR, FLAP/SLAT DRIVE ADAPTER (FEMALE) | 8 | |
| 14PF465TOOL-M | FLAP/SLAT DRIVE ADAPTER (MALE) | 5 | |
| 14PF465TOOL−M | FLAP/SLAT DRIVE ADAPTER (MALE) | 5 | |
| 14PF485KIT | SPLINE ADAPTER –TORQUE TUBE | 1 | |
| 14PF65KF-1001 | SPLINE ADAPTER TORQUE TOOL | 1 | |
| 15-9045-00 | PC TO MULTIBUS ADAPTER CARD | 1 | |
| 150210 | JACK ADAPTER NOSE | 1 | |
| 150266 | JACK ADAPTER NOSE | 1 | |
| 1014668 | INFLATION EQUIPMENT WITH ADAPTER EXCLUSIVE MANOMETER | 1 | |
| 1014774 | WASH SPINNER ADAPTER CFM56 | 1 | |
| 1014822 | SPRAY ADAPTER PW4000-94 | 1 | |
| 1014826 | SPRAY ADAPTER - TRENT700 | 1 | |
| 1019499 | PMAT 2000 RJ45 ADAPTER SET (BLACK) USUALLY PART OF THE PMAT BOX | 1 | |
| 1045224 | WASH NOZZLE SPINNER ADAPTER TRENT1000 | 1 | |
| 1065073 | TOOL - STEEL ADAPTER AERO TURBINE WASHING MACHINE | 1 | |
| 1089845 | WASH NOZZLE SPINNER ADAPTER TRENT1000 | 1 | |
| 1106926 | NIIN 013767268 SPLINE ADAPTER INSTALLER | 1 | |
| 1325067 | WHEEL ADAPTER RINGS | 1 | |
| 1325215 | UAS WHEEL ADAPTER RING NLG | 1 | |
| 1325216 | UAS WHEEL ADAPTER RING MLG | 1 | |
| 12030001 | 3/8” ADAPTER ¼” | 1 | |
| 110602000 | ARINC 615PDL ADAPTER CABLE ASSY | 1 | |
| 112109000 | DAYTON WHEEL ADAPTER 24 | 1 | |
| 1507M32P28 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 1513D014-01 | SMART BRECH PLATE ADAPTER (SBPA) | 1 | |
| 152-241520-01 | WULFSBERG KVL ADAPTER CAB | 1 | |
| 155016-71-12-TA | TEST ADAPTER (5 IT) | 1 | |
| 1565-9910 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| 159GSE50214-3 | MAIN AXLE JACK ADAPTER FOR G550 | 1 | |
| 15W1001001 | INLET LIFTING ADAPTER (E-170) | 2 | |
| 16A01015-1 | PRESSURE TEST ADAPTER FUEL SYSTEM | 1 | |
| 16A13200L1-1 | HW LG MLG JACKING ADAPTER ASSY | 1 | |
| 16A2300-3 | CRADLE ASSEMBLY AFT ADAPTER ENGINE INSTALL | 1 | |
| 16A23201L1-1 | DERICH ADAPTER ASSEMBLY TEST TIMER RELAY | 1 | |
| 16A46008L1-3 | FUEL PRESSURE TEST ADAPTER ASSEMBLY | 1 | |
| 16A46029-3 | FUEL TRANSFER ADAPTER ASSEMBLY | 1 | |
| 16A46185L1-1 | PRESSURE ADAPTER ASSEMBLY, NITROGEN SERVICING UNIT TO AERIAL REFUEL RECEPTACLE | 1 | |
| 16U14503-5/-801 | PITOT-STATIC ADAPTER SET | 1 | |
| 17-1249 | 767 TAIL JACK ADAPTER 2.5" DIA X 12" LONG | 1 | |
| 170-63070-801-11 | VERTICAL SLING ADAPTER LEADING EDGE | 1 | |
| 1730-14-400-1946 | JACK ADAPTER PAD | 1 | |
| 173778 | CHARGING ADAPTER (LONG TUBE AND SHORT TUBE TYPE) | 6 | |
| 173784 | OXYGEN ADAPTER - FILL, TRANSFER | 19 | |
| 1754765-1 | UNIVERSAL ADAPTER 1.25MM | 1 | |
| 178AS460 | FIRING CIRCUIT TEST SET ADAPTER W16 | 1 | |
| 178AS470 | FIRING CIRCUIT TEST SET ADAPTER W17 | 1 | |
| 17G680550-1 | CABLE ADAPTER SET KA FMA | 1 | |
| 17TES0046 | RECORDER INTERFACE (RI) ADAPTER CARD | 1 | |
| 17TES0072 | ROSE ANALYSIS UNIT ADAPTER CABLE - 17TES0072 | 7 | |
| 17TES0076 | ROSE ANALYSIS UNIT - RECORDER USB FDAU SIMULATOR (RUFS) (RI) ADAPTER - 17TES0076 | 1 | |
| 17TES0078 | CVR RACK ADAPTER CABLE L3 | 9 | |
| 17TES0200 | CVR AUDIO MONITOR ADAPTER (L-3 COMMUNICATIONS CORP.) | 1 | |
| 18253G-05 | PLUG ADAPTER CABLE | 9 | |
| 18253G-15 | CORD ADAPTER Y"" | 3 | |
| 18253G-18 | HEADSET PLUG ADAPTER (H10-66) | 3 | |
| 18395G-01 | CHORD ASSY ADAPTER C5401 | 1 | |
| 1862-C | BAROMETRIC PRESSURE SWITCH TEST BOX & ADAPTER HARNESS (HEWLETT-PACKARD MODEL 1862-C MEGGER MODEL BM403) | 1 | |
| 1876AS100-1 | FUEL ADAPTER GAUGE | 1 | |
| 188090-7002 | SMART BREECH PLATE ADAPTER (SBPA) TESTER | 1 | |
| 18821-4 | PITOT ADAPTER FITTINGS -- AIR DATA | 8 | |
| 18C1107 | FIXTURE, ADAPTER GENSPECT HPC STG 2-7 | 1 | |
| 18D9602-1 | VACUUM CHECK ADAPTER SET | 1 | |
| 18E9542-1 | CARBON SEAL TESTER HOSE ADAPTER SET | 1 | |
| 190-05613-003 | FITTING ADAPTER SUCTION LINE | 1 | |
| 1938155-1 | COM-11801 ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE ETHERNET SWITCH) | 1 | |
| 196T06640-401 | JACKING ADAPTER SET | 1 | |
| 19MIT65B01211-1 | TORQUE ADAPTER - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 1AE1N20023 | TORQUE ADAPTER TOOL | 1 | |
| 1AE1N20023 REV NC | TORQUE ADAPTER TOOL | 1 | |
| 1C6344 | TORQUE ADAPTER SET AIR TUBE COUPLING FMF LM2500 | 1 | |
| 1C6344G03 | Torque adapter set air tube coupling fmf LM2500 | 1 | |
| 1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364G03 | Torque Adapter, FWD Adapter Coupling Nut | 1 | |
| 1C8077 | WRENCH ADAPTER 5 BRG NUT | 1 | |
| 1C9375G01 | FORWARD AIR COLLECTOR SUPPORT ADAPTER | 1 | |
| 1C9378P02 | TRUNNION ADAPTER RIGHT HAND | 1 | |
| 1C9378P03 | TRUNNION ADAPTER LEFT HAND | 1 | |
| 1C9626 | TORQUE ADAPTER - PRESSURE TUBE | 1 | |
| 1C9774G01 | TORQUE ADAPTER SET, RETAINER NUT - NO. 5R BEARING INNER RACE NUT | 1 | |
| 1P16057 | TIEROD ADAPTER HP SYSTEM | 1 | |
| 1SF2970-28-40I | FUEL QUANTITY ADAPTER HARNESS | 1 | |
| 1U1302-TAK | TEST ADAPTER KIT (5 IT) | 1 | |
| 2-020V747-75 | PREFORMED PACKING (USE WITH ADAPTER 803213-S58-2) | 1 | |
| 2-264S604-70 | PREFORMED PACKING (USE WITH ADAPTER 803440-S58-10) | 1 | |
| 20-4502-6000 | OXIGEN PRESSURE REGULATOR (TRONAIR) & ADAPTER - OXYGEN CHARGING P/N PC-1006 | 14 | |
| 20-4503-6000 | Crew Oxygen Adapter Caa | 8 | |
| 20-4503-6010 | Crew Oxygen Adapter Pc21 | 1 | |
| 2000932 | 2-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000938 | 1-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000944 | 3-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000951 | 4-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2001212 | PNEUMATIC START WYE ADAPTER (Y-ADAPTER) | 1 | |
| 2002205 | CHARGE ADAPTER -OXYGEN | 1 | |
| 2002273 | SCHRADER VALVE STEM ADAPTER LARGE TO SMALL | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002760 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002761 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-3 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002763 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (1/8 NPTF), Outlet connection (F threads 0.305-32) | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 20022760 | STRUT SERVICE VALVE ADAPTER WITH CORE DEPRESSOR PIN | 1 | |
| 20064-0001 | PC TO MULTIBUS ADAPTER CARD | 1 | |
| 200951-A | NLG JACK ADAPTER (ALT TMHNA01-00-00) | 6 | |
| 2022480-TA | TOOL PROTACTOR ADAPTER (2 IT) | 1 | |
| 2024047-1 | Shaft Adapter | 1 | |
| 2024174-1 | Torque Adapter | 1 | |
| 2024233-1 | TEST ADAPTER PLATE | 1 | |
| 2024482-1 | TORQUE ADAPTER AND HOLDER | 1 | |
| 2024607-1 | CURVIC ADAPTER BALANCE | 1 | |
| 2024607-2 | CURVIC ADAPTER BALANCE | 1 | |
| 2024766-1 | Valve Test Adapter | 1 | |
| 2024785-1 | VALVE TEST ADAPTER (2 IT) | 1 | |
| 2024908-1 | STARTER ADAPTER ASSEMBLY | 1 | |
| 2025565-1 | Mounting Adapter | 1 | |
| 2025661-1 | DUCT TEST ADAPTER (COOLING SIDE) | 1 | |
| 2025699-1 | DUCT TEST ADAPTER (BLEED AIR INLET) | 1 | |
| 2026598 | OXYGEN CHARGE ADAPTER COMBO- 2500 PSI MAX- 1/4 MAL | 1 | |
| 204-90026-1 | ELECTRONIC MODULE TEST ADAPTER SET | 1 | |
| 204-92202-1 | FCAS TEST ADAPTER MX-10664/G | 1 | |
| 205FRDH | TORQUE ADAPTER (SET) | 2 | |
| 20712301-1 | TEST ADAPTER CABLE 1 | 1 | |
| 20712301-2 | TEST ADAPTER CABLE 2 | 1 | |
| 20712301-3 | TEST ADAPTER CABLE 3 | 1 | |
| 20712301-4 | TEST ADAPTER CABLE 4 | 1 | |
| 20712301-5 | TEST ADAPTER CABLE 5 | 1 | |
| 20712301-6 | TEST ADAPTER CABLE 6 | 1 | |
| 20712302-1 | TEST ADAPTER CABLE 7 | 1 | |
| 2078.20.10.00 | TORQUE ADAPTER TIGHTENING | 1 | |
| 208FRDH | TORQUE ADAPTER SET | 1 | |
| 2113157-101 | REFUEL ADAPTER ASSY (CAP PRESSURE FUEL SERVICING) | 1 | |
| 21158148-003 | 21158148-003;USB External Clock Adapter Cable MSAM-V2 | 1 | |
| 21298-250-4 | Stall warning test adapter for Hawker HS125 | 3 | |
| 215029 | Breakaway Adapter for MTM-15 Torque Multiplie | 1 | |
| 215030 | Breakaway Adapter for MTM-27 Torque Multiplier | 1 | |
| 21142018 | 21142018;Labeled Power Adapter for Testpad 2000 This Is for Service / Maintenance / Repair Only | 1 | |
| 21167291 | 21167291;Singlemode Adapter Module for NGC-4500 | 1 | |
| 2155/00.07 | 2155/00.07;Switchable optical adapter LC/PC LC/APC | 1 | |
| 216477-0 | INFLATE/ DEFLATE VALVE ADAPTER KIT | 1 | |
| 2189037F1 | Torque Adapter | 1 | |
| 21C1-3-21-TA | TEST ADAPTER (2 IT) | 1 | |
| 21C7006G01 | BALANCE ADAPTER KIT | 2 | |
| 21C7011G01 | GG ROTOR WHEELS BALANCE ADAPTER KIT | 1 | |
| 21C7071G03 | STAND ADAPTER ENGI | 1 | |
| 21C7082G02 | ENGINE ADAPTER TRANSPORTATION | 3 | |
| 21C7186G01 | TEST ADAPTER VALVE | 1 | |
| 21C8886G01 | TORQUE ADAPTER HORIZONTAL NO 1 BEARING | 1 | |
| 221-8212 | POMONA FLUKE TEST CONNECTOR ADAPTER TO FEMALE BNC | 1 | |
| 221-8214 | POMONA FLUKE TEST CONNECTOR ADAPTER TO MALE BNC (F | 1 | |
| 2210-D10-1040 | TEST ADAPTER - ADC | 1 | |
| 2227000F122 | TORQUE WRENCH ADAPTER BYPASS V. R. | 1 | |
| 2256/90.03 | 2256/90.03;UPP ADAPTER FOR LC MU D 1.25MM | 1 | |
| 2256/90.06 | 2256/90.06;UPP Adapter for FC SC ST DIN D_2.5mm | 1 | |
| 235.1000 | SPRING TESTER-SPRING ADAPTER (KUNZ) | 1 | |
| 226358 | PPG Semco 226358 Model 233 Complete Cartridge Adapter Kit | 1 | |
| 229959 | PPG Semco 229959 Model 850 Adapter for Plastic Retainers | 1 | |
| 23-90-00-0060 | ACARS ADAPTER CABLE | 1 | |
| 23006778- | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 2301/12 | 2301/12;COSA-4055 APC CWDM OSA Module with SFP Bay - SC optical adapter mounted FC enclosed | 1 | |
| 23055758 | ENGINE HANDLING ADAPTER | 7 | |
| 23055759 | ENGINE LIFTING ADAPTER | 7 | |
| 231898 | PPG Semco 231898 Metal Adapter for 1 oz. & 20 oz. Retainers | 1 | |
| 253035 | Valve Test Adapter | 1 | |
| 2242118 | TEST ADAPTER PRESSURE TEST | 1 | |
| 2242119 | TEST ADAPTER PRESSURE TEST | 1 | |
| 2557791 | BYPASS VALVE COVER TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2557792 | FUEL FILTER ASSEMBLY TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2558538 | BEARING INSTALLER ADAPTER – CAGE: 06848 | 2 | |
| 2558644 | PISTON BUSHING ADAPTER SOCKET (2 IT) | 1 | |
| 2558744 | PISTORN BUSHING ADAPTER SOCKE | 1 | |
| 2558773 | SUPPORT ADAPTER REMOVAL | 1 | |
| 2558790 | SUPPORT ADAPTER INBOARD | 1 | |
| 2558806 | SUPPORT ADAPTER (IB / OB) INSTALL | 4 | |
| 2558807 | SUPPORT ADAPTER (IB / OB) REMOVE | 3 | |
| 2566528 | OSG COVER ASSEMBLY TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2566543 | MAIN BODY WORK POSITIONER ADAPTER (CAGE: 06848) | 1 | |
| 2566545 | "OVERSPEED GOVERNOR COVER TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2566548 | HEATED SERVO FITTING ADAPTER (AN-8 TO AN-4 REDUCER) | 1 | |
| 2566549 | FITTING ADAPTER (AN-1 TO AN-4) (2 REQUIRED) (CAGE: 06848) | 1 | |
| 2566550 | TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2566554 | PC SPECIAL FITTING ADAPTER (CAGE: 06848) | 1 | |
| 2566555 | TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2566829 | POWER ARM WORK POSITIONER ADAPTER (CAGE: 06848) | 1 | |
| 22112889 | 22112889;WiFi Adapter for FBP-P5000i | 1 | |
| 22150762 | 22150762;AC Power Adapter - APM-424 VX | 1 | |
| 23002223 | BLEED VALVE ADAPTER TEST | 2 | |
| 23005426 | GUIDE SPUR ADAPTER GEARSHAFT | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 2 | |
| 23006784 | SPUR ADAPTER SHAFT GUIDE | 2 | |
| 23006785 | SPUR ADAPTER GEAR INSTALL TOOL | 2 | |
| 23055299 | ENGINE ASSEMBLY LIFTING ADAPTER | 7 | |
| 23055758 | AFT ENGINE HANDLING ADAPTER | 7 | |
| 23055759 | AFT ENGINE LIFTING ADAPTER | 7 | |
| 23063525 | ENGINE ADAPTER - COM-PRESSOR CLEANING CART | 6 | |
| 23063525-201 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23063525-202 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23063525-203 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
| 23066522 | FORWARD LIFTING ADAPTER | 7 | |
| 23066566 | FWD SUPPORT ADAPTER P/N 23066566 | 7 | |
| 23066566 | FWD SUPPORT ADAPTER | 7 | |
| 2307/90.02 | 2307/90.02;UPP adapter 2.5mm type - SC/FC/ST/DIN - for OLP-8x Series OPM | 1 | |
| 2307/90.03 | 2307/90.03;UPP adapter 1.25mm type - LC/MU - for OLP-8x Series OPM | 1 | |
| 2317-T020-401 | JACK ADAPTER PHENOM 300 | 2 | |
| 2344-0051-02 | MALE SQ ADAPTER 3/8 X 3/8 | 1 | |
| 2344-0051-11 | MALE SQ ADAPTER 1/4 X 1/4 | 1 | |
| 2344-0051-13 | MALE SQ ADAPTER 1/2 X 1/2 | 1 | |
| 2344-0051-16 | MALE SQ ADAPTER 3/8 X 1/2 | 1 | |
| 2344-0051-19 | MALE SQ ADAPTER 3/4 X 1-1/2 | 1 | |
| 23B19241 | GAGE ADAPTER AND BLOWOUT DISC | 1 | |
| 23D19238 | TOOL ADAPTER ASSEMBLY | 1 | |
| 23D19238-1 | TOOL - ADAPTER ASSEMBLY (INFLATE/DEFLATE | 4 | |
| 2423F | STATIC PORT ADAPTER KIT | 1 | |
| 246-049082-01 | KVL ADAPTER CABLE | 1 | |
| 2471018-001 | BLEED AIR ADAPTER ASSY | 3 | |
| 247C5260 | FIXTURE - FORWARD ADAPTER - REMOVAL | 1 | |
| 247C5263G01 | Stanchion adapter set support fuel manifold | 1 | |
| 247C5263G02 | Stanchion adapter set support fuel manifold | 1 | |
| 25-82-4A | TEST ADAPTER FOR POWER SWITCH | 1 | |
| 25-82-4B | TEST ADAPTER FOR POWER SWITCH | 1 | |
| 25-82-4BA | TEST ADAPTER FOR POWER SWITCH | 1 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| 2557792-1 | FUEL FILTER ASSEMBLY TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2557792-2 | FUEL FILTER ASSEMBLY TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 2557792-3 | FUEL FILTER ASSEMBLY TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 256035-PT | 256035-PT PRESSURE TRANSDUCER (OPTIONAL) PRESSURE TRANSDUCER. RANGE 0-750/1000 PSIG. INCLUDES: ADAPTER AND BRACKET . T-FITTING . HARNESS | 1 | |
| 2566555-5 | TORQUE ADAPTER (CAGE: 06848) | 1 | |
| 257262-32 | HIGH FLOW TEST ADAPTER (2 IT) | 1 | |
| 257562-26 | Valve Test Adapter | 1 | |
| 257562-4 | Valve Test Adapter | 1 | |
| 257562-46 | Valve Test Adapter | 1 | |
| 257562-47 | VALVE TEST ADAPTER (2 IT) | 1 | |
| 257562-71 | Valve Test Adapter (2 reqd) | 1 | |
| 257562-81 | Valve Test Adapter | 1 | |
| 259-202702-4-3 | COM-22906 - ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | 1 | |
| 259084-8 | Vacuum Chamber Adapter | 1 | |
| 2591553 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK | 1 | |
| 2591553-903 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK | 3 | |
| 259996-01 | DATA LOADER CABLE ADAPTER ASSY | 1 | |
| 25Y635AB | GRAVITY DEFUEL DRAIN ADAPTER OR SUCTION DEFUEL DRAIN ADAPTER | 1 | |
| 25Y867A | FUEL DRAIN ADAPTER FOR WING AND VENTRAL TANKS | 6 | |
| 25YTS129R21AKIT | 146/RJ ADAPTER KIT | 1 | |
| 26008573-101 | TPS SELF - TEST ADAPTER (PART OF KIT N 7 ) | 1 | |
| 26015076-102 | CONNECTOR ADAPTER CABLE ASSEMBLY | 1 | |
| 26015081-102 | CONNECTOR ADAPTER CABLE ASSEMBLY | 1 | |
| 2612-TA | HOSE ADAPTER #12 (2IT) | 1 | |
| 2643G-2 | BARFIELD ADAPTER CABLE | 1 | |
| 2643G-3 | BARFIELD ADAPTER CABLE | 1 | |
| 269A3150-5-80904 | Torque Wrench Adapter Landing Gear | 2 | |
| 269A9291 | Wrench Adapter Preload Ls Shaft | 2 | |
| 269T1005 | Compressor Check Spline Adapter Engine Turning Tool | 2 | |
| 269T9211-003 | Drive Shaft Coupling Adapter Spanner Wrench | 1 | |
| 269T9211-005 | Wrench Adapter Spanner, Lower Pulley FWD Nut | 2 | |
| 269T9211-5 | WRENCH ADAPTER SPANNER, LOWER PULLEY FWD NUT | 1 | |
| 27-18-90424 | ACOUSTIC ADAPTER FOR 89-01 SERIES | 1 | |
| 27/01/4847 | SET ADAPTER FWD ENGINE MOUNT VIBRATION ISOLATOR | 1 | |
| 276014-1-1 | Balancing Adapter Set | 1 | |
| 2786S52-1 | VALVE BODY ADAPTER TOOL | 2 | |
| 28-0-1380 | F100 ADAPTER NOSE WHL NUT | 5 | |
| 28-0-1381 | F100 ADAPTER MAIN WHL NUT | 3 | |
| 28-0-1381D | F100 ADAPTER MAIN WHL NUT | 1 | |
| 28-0-1804G | HYD SYS ADAPTER SET | 2 | |
| 28-0-4070B | F100 ADAPTER CABLE SET | 1 | |
| 28-0-4893 | TORQUE ADAPTER SLIP-CLUTCH | 1 | |
| 28-0-5011 | SET- ADAPTER LIFT DUMPER MECHANICAL | 2 | |
| 28-0-5255 | F100 ADAPTER LOCKNUT | 1 | |
| 28.0.4893 | TORQUE ADAPTER SLIP-CLUTCH | 1 | |
| 280384-3 | Regulator Test Adapter Assembly | 1 | |
| 281312-4 | VALVE TEST ADAPTER SET | 1 | |
| 281312-7 | Valve Test Adapter Set | 1 | |
| 281312-7A | VALVE TEST ADAPTER (2IT) | 1 | |
| 281312-8 | Valve Test Adapter Set | 1 | |
| 281312-9 | Valve Test Adapter Set | 1 | |
| 284196-2-1 | TORQUE MULTIPLIER AND ADAPTER ASSY | 1 | |
| 284357-1 | HOISTING ADAPTER SAT-1091 | 1 | |
| 284557-1-1 | ENGINE ADAPTER FRONT | 1 | |
| 285819-1-1 | Valve Test Adapter | 1 | |
| 287016-1 | TAILPIPE ADAPTER ASSEMBLY | 1 | |
| 287053-1 | TORQUE ADAPTER | 1 | |
| 287325-1-1 | Upstream Valve Test Adapter | 1 | |
| 287326-1-1 | Downstream Valve Test Adapter | 1 | |
| 287418-2-1 | Seal Brake In Adapter Motor | 1 | |
| 287493-1-1 | BUSHING, ADAPTER , | 1 | |
| 287608-1 | Valve Test Adapter | 1 | |
| 287784-1 | Valve Test Adapter Kit | 1 | |
| 287850-1-C | RIVET SET ADAPTER (3 IT) | 1 | |
| 287850-1A | RIVET SET ADAPTER (2 IT) | 1 | |
| 287893-1 | Rivet Set Adapter | 1 | |
| 289130-1 | Splined Torque Wrench Adapter | 1 | |
| 289132-1 | Torque Wrench Adapter | 1 | |
| 289133-1 | Valve Test Adapter | 1 | |
| 289258-1 | Torque Wrench Adapter | 1 | |
| 289265-2 | THERMOSTAT TEST ADAPTER ASSEMBLY | 1 | |
| 289342-1 | Torque Wrench Adapter | 1 | |
| 289432-1 | Torque Wrench Adapter | 1 | |
| 289467-1 | Valve Test Adapter | 1 | |
| 289485-1 | Torque Wrench Adapter | 1 | |
| 289535-1 | Torque Wrench Adapter | 1 | |
| 289540-1 | Shaft Retaining Adapter | 1 | |
| 289541-1 | Fuel Pump Test Adapter | 1 | |
| 289542-1 | Fuel Control Test Stand Adapter | 1 | |
| 289817-1 | TORQUE WRENCH ADAPTER CAGE | 1 | |
| 289817-2 | TORQUE WRENCH ADAPTER CAGE | 1 | |
| 2900-50-0004MR | ST ADAPTER FOR OTDR & OLS TEST PORTS | 2 | |
| 290166 | ADAPTER - VALVE TEST - ADAPTER "X" | 2 | |
| 290166-1 | Valve Test Adapter | 1 | |
| 290167 | SPL-6643 ADAPTER - COMPONENT TEST PORT | 1 | |
| 290169 | T ADAPTER - VALVE TEST | 1 | |
| 290419-1-1 | TESTER KIT ADAPTER APU | 2 | |
| 290435-1 | Valve Test Adapter | 2 | |
| 290435-1-1 | R ADAPTER - VALVE TEST | 5 | |
| 291122-1 | Torque Wrench Adapter | 1 | |
| 291272-1 | TORQUE WRENCH ADAPTER RETAINER ASSEMBLY | 1 | |
| 2916701-1 | JACKING ADAPTER WING AND AFT FUSELAGE JACK POINT | 1 | |
| 291921-1 | PLATE SET ADAPTER KIT | 1 | |
| 291967-7 | PULLER ADAPTER ROTORSEAL | 1 | |
| 291993-1 | BALANCING GEARSHAFT ADAPTER ASSEMBL | 1 | |
| 293438-1 | Torque Adapter | 1 | |
| 293481-1 | Torque Wrench Adapter | 1 | |
| 294153-1 | pressure check adapter (2 reqd) | 1 | |
| 294640-2 | VALVE TEST ADAPTER (2 ITEMS) | 1 | |
| 294640-3 | VALVE TEST ADAPTER (2 IT) | 1 | |
| 294640-5 | Valve test adapter (upstream) | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294863-1 | MAINTENANCE STAND ADAPTER KIT | 1 | |
| 294863-2 | MAINTENANCE STAND ADAPTER KIT HOLDS ENGINE ASSEMBLY IN 287750-1 MAINTENANCE STAND | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 294876-1 | TAIL PIPE ADAPTER ASSY | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | 1 | |
| 294895-1 | Valve Test Adapter | 1 | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | 1 | |
| 294912-1 | FAN ASSEMBLY PULLER ADAPTER (USED WITH PN 289768-3 HYDRAULIC PULLER TO REMOVE FAN ROTOR ASSEMBLY) | 1 | |
| 294927-1 | DRIVEN COMPRESSOR HOISTING ADAPTER AND HOUSING REMOVAL (TO LIFT DRIVEN COMPRESSOR ASSEMBLY DURING MAINTENANCE OPERATIONS) | 1 | |
| 296175-1 | TAILPIPE ADAPTER ASSEMBLY | 1 | |
| 296175-2 | TAILPIPE ADAPTER ASSEMBLY | 1 | |
| 296339-1 | TPE RECOMPENSATION ADAPTER KIT | 1 | |
| 296437-1 | Torque Wrench Adapter | 1 | |
| 296818-1 | SPLINED ADAPTER INSTALLATION AND REMOVAL TOOL | 1 | |
| 298062-1 | Spline Adapter Puller Set | 1 | |
| 298131-1 | TURBINE SUPPORT PULLER ADAPTER KIT | 1 | |
| 298262-1 | Oil Pump Assembly Adapter And Shaft Assembly | 1 | |
| 2C14113 | HPC ROTOR FWD SPLINE ADAPTER REMOVAL-INST. | 1 | |
| 2C14199P102 | BEARING ADAPTER SHAFT | 1 | |
| 2C14286G01 | CABLE ADAPTER (FOR P | 1 | |
| 2C14635G01 | ENGINE CORE MOTORING ADAPTER - CF6-80 ENGINES | 1 | |
| 2C14649P05 | SPL-6361 ADAPTER - CORE ENGINE MOTORING | 1 | |
| 2C14664 | TORQUE ADAPTER SET - RET NUT | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 3 | |
| 2C14664G02 | Torque adapter set,retainer nut-no 5r inner bearing race | 1 | |
| 2C14664G04 | Torque adapter set,retainer nut-no 5r inner bearing race | 1 | |
| 2C14685G01 | SPL-6742 ADAPTER - ANTI-TORQUE STOP ARM | 1 | |
| 2C14729G01 | ADAPTER SET, PEDESTAL - ENGINE AFT (PEDESTAL ADAPTER SET) | 5 | |
| 2C14738G01 | STAGE 1 FAN DISK NUTS INSTALL/REMOVE ADAPTER SET | 2 | |
| 2C14827G01 | ADAPTER SET, PEDESTAL - ENGINE AFT (PEDESTAL ADAPTER SET) | 4 | |
| 2C14856G01 | SPANNER ADAPTER SET, AIRTUBE NUTS | 6 | |
| 2C14856P04 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P05 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P06 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P07 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P08 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P09 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P12 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P13 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P14 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6047 | PULLER, ADAPTER - NO.4 BRG INNER RACES & FWD SEAL | 2 | |
| 2C6048 | PULLER, ADAPTER - AFT AIR SEAL & SPLIT NUT SPANNER | 2 | |
| 2C6352P03 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P07 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P09 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 4 | |
| 2C6352P13 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P15 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P18 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P21 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P22 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P23 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P25 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P30 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6456P02 | CDP ADAPTER (PS3) | 1 | |
| 2C6456P03 | CDP ADAPTER (PS3) | 1 | |
| 2C6470P02 | KIT ADAPTER HARNESS | 1 | |
| 2C6943G02 | WRENCH,SPLINE ADAPTER NUT,ASSEM HPC | 1 | |
| 2C8064G01 | SPLINE ADAPTER INSPECTION GONO-GO GAGE | 2 | |
| 2C8084 | ENGINE START CART-LUBE/SCAVENGE PUMP ADAPTER KIT | 1 | |
| 2C8084G01 | ADAPTER ADAPTER KIT,ENGINE START CART-L | 1 | |
| 2C81007G03 | ENGINE ADAPTER HOIST | 4 | |
| 2C81017G01 | BUILD-UP STAND ADAPTER (ADAPTER) | 1 | |
| 2C90500G02 | Hoisting Adapter CT7 | 2 | |
| 2G7899 | AIR STARTER DRAIN ADAPTER | 8 | |
| 2LJ143W0026 | Locating jig connexion adapter plate lugs 43 section | 1 | |
| 2ME65B40006 | HEAT EXCHANGER ADAPTER ASSY | 8 | |
| 2ME65B89603 | ACCESSORY ADAPTER - HOIST SYSTEM RB211-524 AND CF6-50 ENGINES | 2 | |
| 2ME65B94600 | AFT MOUNT ADAPTER - GE LIFT FIXTURE, CF6-50 ENGINE | 1 | |
| 2MIT100T3480 | TORQUE MULTIPLIER AND ADAPTER VERTICAL PIN | 1 | |
| 2MIT65 45109 22 | TOOL ADAPTER ENGIN | 5 | |
| 2MIT65-45109-22 | MISC. TOOL ADAPTER -0 ENGINE UNIVERSAL PROTCR | 5 | |
| 2MIT65-45109-22-1 | PROTRACTOR ADAPTER MISC TOOL | 1 | |
| 2MIT65B01201 | WRENCH ADAPTER GLAND NUT WLG & BLG | 12 | |
| 2MIT65B01202 | WRENCH ADAPTER - GLAND NUT, NOSE GEAR | 8 | |
| 2MIT65B01203 | TORQUE ADAPTER - RETAINER NUT, BODY LANDING GEAR TRUNNION | 2 | |
| 2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | 1 | |
| 2MIT65B01502 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 2 | |
| 2MIT65B01504-1 | TORQUE ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| 2MIT65B04008 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 1 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 2MIT65B82106 | TORQUE WRENCH ADAPTER - AILERON CONTROL | 1 | |
| 2MIT65B82585 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 1 | |
| 2TE60B40037-1 | CABLE ADAPTER -0 TRW/CINCH | 1 | |
| 2TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| 2TE65B80562 | TEST ADAPTER - DRIVE MECHANISM, STABILIZER TRIM | 1 | |
| 2TE65B92603 | Test Equipment Fuel Adapter Jettison System | 1 | |
| 2TSJ65B01504-1 | TEST ADAPTER - VENT VALVE, TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 1 | |
| 3-1560 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 3-1609-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 3-1610-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 3.5OTJAADAPTERS | OVER TOP JACK ADAPTER 3.5 INCH | 1 | |
| 3001415-1 | PRESSURE SWITCH ADAPTER TEST | 1 | |
| 3008-550 | LEVERAGE ADAPTER 767 | 3 | |
| 301-547-206-0 | CFM56-5A/5B ENGINE BOTTLE ADAPTER QTY 2 | 1 | |
| 3042000F29 | Torque Adapter | 1 | |
| 3042000F31 | Torque Adapter | 1 | |
| 304691A | HOSES AND ADAPTER KIT | 1 | |
| 3073974-01 | FUEL NOZZLE ADAPTER ASSY | 1 | |
| 3073976-01 | FUEL NOZZLE ADAPTER ASSY | 1 | |
| 30MIT65B00112 | Jacking Adapter Assy | 10 | |
| 31-0008-04 | CA-420C ADAPTER KIT 8.5 | 1 | |
| 31-324-112 | CONNECT ADAPTER LEAD | 1 | |
| 35 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 1 | |
| 3140 | DC ADAPTER CABLE | 1 | |
| 31104 | 1/2" SOCKET WRENCH ADAPTER FOR 1/4" BITS PULL TYPE TITANIUM | 1 | |
| 36202 | IMPACT ADAPTER 1" (F) - 1.1/2" (M) NON SPARKING Cu-Be | 1 | |
| 36207 | IMPACT ADAPTER 1" (F) - 1.1/2" (M) NON SPARKING Al-Bron | 1 | |
| 310075 | Vacuum Adapter (for 1/4 F/Hex Dr, M20) | 1 | |
| 310076 | Vacuum Adapter (for 1/4 F/Hex Dr, M23) | 1 | |
| 310077 | Vacuum Adapter (for 4mm D-Cut Dr, M20) | 1 | |
| 310100 | PPG Semco 310100 1cc Syringe Adapter Head with Hose Assembly | 1 | |
| 310101 | ADC COM Adapter Set (RS422 to USB) | 1 | |
| 310102 | SMPS Adapter (24VDC 1A) | 2 | |
| 310110 | Power Cord for SMPS Adapter (220V CE Plug) | 1 | |
| 310111 | Power Cord for SMPS Adapter (110V UL Plug) | 1 | |
| 310113 | Vacuum Adapter for MDA Robotic Screwdrivers (1/4 F/Hex Dr) | 1 | |
| 310300 | PPG Semco 310300 3cc Syringe Adapter Head with Hose Assembly | 1 | |
| 310600 | PPG Semco 310600 6cc Syringe Adapter Head with Hose Assembly | 1 | |
| 311000 | PPG Semco 311000 10cc Syringe Adapter Head with Hose Assembly | 1 | |
| 312000 | PPG Semco 312000 20cc Syringe Adapter Head with Hose Assembly | 1 | |
| 313500 | PPG Semco 313500 35cc Syringe Adapter Head with Hose Assembly | 1 | |
| 3140-1 | DC ADAPTER CABLE | 1 | |
| 31501-1 | DMU ADAPTER CABLE | 1 | |
| 31505-4 | ARINC 603 ADAPTER (1 | 7 | |
| 31523-1 | ATSU ADAPTER CABLE | 1 | |
| 31530-2 | PDL-ADL ADAPTER CABLE | 2 | |
| 316000 | PPG Semco 316000 60cc Syringe Adapter Head with Hose Assembly | 1 | |
| 31691A0000-01 | Jacking Adapter for AW139 | 1 | |
| 3170029-1 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 3170029-1 THRU -4 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 3171005-001 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 32025-1 | WRENCH ADAPTER AXLE NUT NLG | 1 | |
| 3218AS552-1 | RETURN ADAPTER ASSEMBLY | 1 | |
| 32479-001 | SYRINGE TIP ADAPTER (GREEN) | 5 | |
| 32479-002 | SYRINGE TIP ADAPTER (WHITE) | 1 | |
| 32479-003 | NOZZLE ASSEMBLY (SYRINGE TIP ADAPTER ) | 1 | |
| 32479-004 | SYRINGE TIP ADAPTER (BLACK) | 1 | |
| 327080-0010 | BOSE 6-PIN LEMO PANEL POWER TO FIXED WING DUAL PLUG ADAPTER PART NUMBER: 327080-0010 | 1 | |
| 327080-0020 | 6-PIN LEMO TO HELICOPTER ADAPTER FOR BOSE HEADSETS | 1 | |
| 3281AS100-1 | TEST ADAPTER (H-60 AIR DATA SYSTEM) | 1 | |
| 3300264-6001 | LOX CART, ADAPTER KIT | 1 | |
| 3300264-6001MODA | PBG FIELD TESTER ADAPTER KIT | 1 | |
| 33021-030-017 | TOW HYDRO ADAPTER BUSHING | 1 | |
| 332A91-4105-02 | JACK ADAPTER PAD, MAIN LANDING GEAR, TOOL | 1 | |
| 332A91-4205-00 | JACK ADAPTER PAD | 1 | |
| 332A95-5201-00 | JACK ADAPTER PAD | 1 | |
| 334010SAS-125-4 | Static Test Adapter - Boeing 717 | 2 | |
| 33410-70-4 | STATIC ADAPTER BJ 400 | 5 | |
| 33410FFAB-125-4 | Static Test Adapter for Cessna Citation | 8 | |
| 33410FFAB125-4 | STATIC ADAPTER FITTINGS -- AIR DATA | 8 | |
| 33410HH-125-4 | Static Test Adapter - ATR42, ATR72, ATR42-500 | 8 | |
| 33410LH-125-4 | STATIC TEST ADAPTER (4ea) | 21 | |
| 33410LH-125B | PITOT STATIC ADAPTER (0005092) | 2 | |
| 33410LH125-4 | STATIC TEST ADAPTER | 21 | |
| 33410LH1254 | STATIC TEST ADAPTER - ATR42, ATR72, ATR42-500 | 21 | |
| 33410M-125-4 | PITOT STATIC ADAPTER | 9 | |
| 33410S-70-4 | UNIVERSAL TEST ADAPTER FOR LEAK TEST | 6 | |
| 33410SAS-125B | PITOT ADAPTER PLUG | 1 | |
| 3342860-34 | TEST ADAPTER ASSY | 1 | |
| 3342860-35 | TEST ADAPTER ASSY | 1 | |
| 3342860-36 | TEST ADAPTER ASSY | 1 | |
| 3342860-37 | TEST ADAPTER ASSY | 1 | |
| 3342860-64 | TEST ADAPTER ASSEMBLY | 1 | |
| 33A121 | PROBE ADAPTER (HOCKING) | 2 | |
| 3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
| 3401238-1 | TORQUE ADAPTER ASSY | 2 | |
| 3402046-1 | TORQUE WRENCH ADAPTER (FWD FUSELAGE SPLICE BOLTS) | 1 | |
| 3402417-85 | FUEL-3600-GAL FUSELAGE TANK ADAPTER ASSY | 1 | |
| 3402779-1 | STATIC PORT ADAPTER ASSY | 1 | |
| 34C-10-02 | CHALLENGER 350 PITOT STATIC ADAPTER KIT | 1 | |
| 34ME65B00713-1 | REAR ADAPTER - CORE ENGINE, JT9D | 1 | |
| 35-92000-0201 | AUXILIARY WHEEL KEY. ADAPTER FOR NLG NUT | 1 | |
| 35-92122-0001 | FUEL DRAIN ADAPTER WITH HOSE | 1 | |
| 3534N6 | HIGH PRESSURE FILL VALVES ADAPTER 70 DEG | 1 | |
| 357-8622-160 | Crimp Tool, Adapter (for Coax) | 1 | |
| 35M5M01160001 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 2 | |
| 35ME65B00713-1 | FRONT ADAPTER - JT9D CORE ENGINE | 1 | |
| 3614K000 | INLET ADAPTER | 1 | |
| 3615K000 | OUTLET ADAPTER (2IT) | 1 | |
| 363000 | PPG Semco 363000 30cc55cc Adapter Head Assembly | 1 | |
| 369A9983 | TORQUE ADAPTER FRDH 141 | 1 | |
| 369D29904 | HOIST ADAPTER "D" MODEL | 1 | |
| 36MIT65B00141 | JACK ADAPTER - FORWARD BODY | 10 | |
| 36MIT65B00141-1 | JACK ADAPTER -0 NOSE | 4 | |
| 370-044-001 | FUEL QTY ADAPTER HARNESS | 1 | |
| 3727051-1 | Torque Adapter | 1 | |
| 3727377-1 | WIRE ADAPTER JIG | 1 | |
| 3791011-1 | Spring Scale Centering Adapter Plate | 1 | |
| 3791011-1PM | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 3791085-1 | VALVE TEST ADAPTER TUBE (2 IT) | 1 | |
| 3791195-1 | LINEAR GAGE ADAPTER KIT | 1 | |
| 3791406-1 | VALVE TEST ADAPTER KIT | 1 | |
| 381847AT1-103 | TRANSFER TUBE TORQUE WRENCH ADAPTER (A TWO PART TOOL) | 1 | |
| 381870AT20 | TORQUE WRENCH ADAPTER GLAND | 2 | |
| 381870LAT1-1 | GLAND TORQUE WRENCH ADAPTER PN 381800 | 1 | |
| 386-40-1 | STATIC PORT ADAPTER ASSEMBLY | 1 | |
| 390-810000/928 | MAIN GEAR AXLE ADAPTER FOR PREMIER 390 | 2 | |
| 390ENGCONT | ENGINE CONTROL ADAPTER CABLE ADAPT | 1 | |
| 3916732-1 | ANTISKID TRANSDUCER ADAPTER SPAN | 1 | |
| 3916732-503 | SPANNER - TRANSDUCER ADAPTER ANTI-SKID | 9 | |
| 3916752-501 | ANTI-SKID TRANSDUCER ADAPTER SPANNE | 1 | |
| 3955380-501 | APU HOIST SLING ADAPTER KIT | 2 | |
| 3C3208G03 | COUNTER TORQUE ADAPTER SET | 1 | |
| 3G0805G00132 | AW ADAPTER COMPONENTS | 1 | |
| 3G1200G00132 | ADAPTER KIT, HELICOPTER SERVICING | 1 | |
| 3G1205G00132 | AW ADAPTER COMPONENTS | 1 | |
| 3G1205G00231 | MAIN ROTOR DAMPER OIL FILLING ADAPTER TOOL | 2 | |
| 3G1805G01431 | TOOL KIT(MVA) ADAPTER KIT(HELICOPTER SERVICING) | 1 | |
| 3G2405G00531 | CABLE ADAPTER BATTERY | 1 | |
| 3G2905G00132 | PCM ADAPTER KIT | 1 | |
| 3G6205G09031 | TROLLEY ADAPTER TOOL, MRH HEAD | 1 | |
| 3G6320H09651A651A | MGB ADAPTER (STA 5760) | 1 | |
| 3G6405G05431 | TROLLEY ADAPTER TR HEAD SUPPORT | 1 | |
| 3G6505G00731 | TROLLEY ADAPTER IGB SUPPORT | 1 | |
| 3G6505G00831 | TROLLEY ADAPTER TGB SUPPORT | 1 | |
| 3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
| 3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 12 | |
| 3MIT65B04008-12 | SPLINE ADAPTER -0 | 1 | |
| 3MIT65B40500-1 | SPL-5063 ADAPTER - VENTILATION, FUEL TANK | 6 | |
| 3MIT65B80307-1 | ADAPTER - PROTRACTOR, CONTROL COLUMN ASSEMBLY ?(PART# CONTROL WHEEL ADAPTER 3MIT65B80307-1, SUP. 81205) | 7 | |
| 3MIT65B82585 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 3 | |
| 3SF3432-77-20IN | EGT. CAL. ADAPTER CABLE | 1 | |
| 3SF5718-501 | SYNTHESIZER FUNCTION ADAPTER CABLE | 1 | |
| 3SF6133-1 | NLG STEERING ADAPTER WRENCH | 1 | |
| 3TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| 3TE65 73762 | JACKING ADAPTER NO | 3 | |
| 3TE65-73762 | JACKING ADAPTER -0 NOSE GEAR INST’L | 3 | |
| 3TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | 1 | |
| 3TSJ60B00002 | TILT TABLE ADAPTER INS UNIT | 1 | |
| 4-10XHU6-SS | PRESSURE ADAPTER 7/8 INCH | 1 | |
| 4-10XHU6-SS MS33514 | COM-25014 ADAPTER - PRESSURE (7/8-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-8XHU6-SS | PRESSURE ADAPTER 3/4 INCH | 1 | |
| 4-8XHU6-SS MS33514 | COM-25015 ADAPTER - PRESSURE (3/4-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-8XHU6SS | PRESSURE ADAPTER 3/4 INCH | 1 | |
| 4001438-1 | VALVE CORE ADAPTER ( BIG ) | 1 | |
| 4001439-1 | VALVE CORE ADAPTER ( SMALL) | 1 | |
| 404-201 | PC TO MULTIBUS ADAPTER CARD | 1 | |
| 404708-1 | STAND ADAPTER ASSEMBLY | 1 | |
| 4091AS0230-1 | ENGINE PRESERVATION ADAPTER SET / MFC: 80020 / MFC: 30003 | 1 | |
| 41035G-02 | 41035G-02 - DAVID CLARK ADAPTER CORD WITH PJ-051 JACK | 4 | |
| 41090G-15 | CHARGER ADAPTER CORD 230VAC | 3 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 9 | |
| 4240-401 | UNIVERSAL ADAPTER KIT | 3 | |
| 427-240-105-101 | WRENCH ADAPTER TR DRIVE | 1 | |
| 43-AD-217 | TRUNNION BOLT ADAPTER KIT | 1 | |
| 440Y3 | Test Adapter for 980L-1 / 1A | 2 | |
| 442320C | AERO FLI A320 CEO ADAPTER AND SETUP - A319 CEO, A320 CEO, A321 CEO SETUP - A319 CEO, A320 CEO, A321 CEO ADAPTER - P/N 442320C INCLUDED WITH W5101 | 1 | |
| 444-65219-000 | 40MM ADAPTER FOR TORQUE WRENCH | 1 | |
| 4507100101-005 | Wing Jack Adapter with Tie-Down | 6 | |
| 4507100104-001 | Nose Jack Adapter Tie-Down | 3 | |
| 45311 | TEST ADAPTER (3IT) | 1 | |
| 45A99147-001 | JACK ADAPTER BENCH 400 | 4 | |
| 460002661/3 | Test Adapter | 10 | |
| 460002661/4 | Test Adapter | 4 | |
| 460004094/12 | Test Adapter | 4 | |
| 460004459/5 | TEST ADAPTER (QTY 2) | 5 | |
| 460006492 | TEST ADAPTER | 4 | |
| 460007011 | A330 MLG WHEEL ADAPTER | 27 | |
| 47001-005-000 | ENGINE ADAPTER KIT | 1 | |
| 47001-006-000 | ENGINE ADAPTER KIT FOR TRENT 700 ENGINE MODEL | 1 | |
| 47001-008-000 | CF6-80C2 PEDESTAL ADAPTER KIT | 1 | |
| 47001-038-000 | PW2000 PEDESTAL ADAPTER KIT | 1 | |
| 47001-039-000 | RB211 PEDESTAL ADAPTER KIT | 1 | |
| 47001-040-000 | PW4000 PEDESTAL ADAPTER KIT | 1 | |
| 4757T122 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;3900 | 1 | |
| 4757T123 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;3200 | 1 | |
| 4757T124 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;3200 | 1 | |
| 4757T125 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/4 MAX PSI;2600 | 1 | |
| 4757T126 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;2600 | 1 | |
| 4757T164 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/8 MAX PSI;3200 | 1 | |
| 4757T166 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-3/8 MAX PSI;3900 | 1 | |
| 4757T167 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/2 MAX PSI;3200 | 1 | |
| 4800-31 | HAZET UNIVERSAL ADAPTER 4800-31 | 1 | |
| 488-484 | REFUEL ADAPTER ASSY (CAP PRESSURE FUEL SERVICING) | 1 | |
| 4916701-1 | FUSULAGE JACK ADAPTER ASSEMBLY | 9 | |
| 4916707-1 | MOORING ADAPTER WING | 2 | |
| 4916707-2 | MOORING ADAPTER WING | 1 | |
| 4916745-501 | TORQUE ADAPTER - MLG DOOR JAM NUT | 8 | |
| 4916760-1 | Adapter – Torque,Flight Spoiler Cylinder Gland | 1 | |
| 4916764-1 | NLG TORQUE ADAPTER RETRACT VENTRAL | 2 | |
| 4916776-501 | NLG RESTRICTOR NUT ADAPTER 2PCS | 9 | |
| 4916780-1 | ANTISKID TRANSDUCER ADAPTER SPAN | 1 | |
| 4916787-1 | TORQUE ADAPTER - PASSENGER DOOR | 6 | |
| 4916795-507 | TORQUE ADAPTER MLG FIXED SIDE STRUR | 1 | |
| 4916799-1 | SLAT CYLINDER ADAPTER TOOL | 2 | |
| 4920-01-168-1313 | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 4936K415 | BSPP MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;5500 | 1 | |
| 4936K418 | BSPP MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;4500 | 1 | |
| 4936K419 | BSPP MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;4500 | 1 | |
| 4936K428 | BSPP MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;3500 | 1 | |
| 4936K437 | BSPP MALE ADAPTER PIPE SIZE;A-1 B-3/4 MAX PSI;3000 | 1 | |
| 4936K715 | BSPT MALE ADAPTER PIPE SIZE;A-1/8 B-1/4 MAX PSI;5500 | 2 | |
| 4952361-T | TEST PLATE ADAPTER | 1 | |
| 4A7033-T | TEST ADAPTER (2 IT) | 1 | |
| 4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
| 4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| 4MIT65B04008 | LUBE ADAPTER SET - FLAP TRAILING EDGE TORQUE TUBE COUPLINGS | 9 | |
| 4MIT65B04308 | TORQUE ADAPTER - CARGO DOOR MECHANISM | 4 | |
| 4MIT65B82106 | TORQUE WRENCH ADAPTER - LOAD LIMIT AILERON CONTROL | 1 | |
| 5-15P | 125V DETACHABLE PLUG ADAPTER 15A | 1 | |
| 5-15P PLUG | 125V DETACHABLE PLUG ADAPTER 15A | 1 | |
| 5-2869 | LEVERAGE ADAPTER - ACCESS PANEL | 1 | |
| 50-590013 | WRENCH ADAPTER TORQUE | 1 | |
| 50-590014 | LOWER FORWARD WING NUT TORQUEWRENCH ADAPTER (5/8 INCH HEX) | 1 | |
| 500-176518-01 | VOLTAGE STANDING WAVE RATIO (VSWR) PRIMARY COAX PIN ADAPTER ASSEMBLY, SIZE 5 | 1 | |
| 500-176518-02 | VOLTAGE STANDING WAVE RATIO (VSWR) DIVERSITY COAX PIN ADAPTER ASSEMBLY, SIZE 12 | 1 | |
| 500-176518-03 | VOLTAGE STANDING WAVE RATIO (VSWR) PRIMARY CALIBRATION ADAPTER ASSEMBLY, SIZE 5 | 1 | |
| 500-176518-04 | VOLTAGE STANDING WAVE RATIO (VSWR) DIVERSITY CALIBRATION ADAPTER ASSEMBLY, SIZE 12 | 1 | |
| 500-707600-105 | Inlet Port Adapter | 1 | |
| 500T72 | TORQUE WATCH & ADAPTER ASSEMBLY | 1 | |
| 5020-1 | REFILL ADAPTER AVOX PN: 5020-1 | 2 | |
| 506-23-1 | TRIPOD JACKS - ADAPTER (CAP) | 1 | |
| 506-23-2 | TRIPOD JACKS - ADAPTER (CAP) | 1 | |
| 507.20.12.051 | MAIN GEAR ADAPTER PC 12 | 1 | |
| 508263-001 | Torque Adapter | 1 | |
| 5098T02G01 | HOIST ADAPTER − GENERAL PURPOSE | 1 | |
| 50MIT65B00112 | JACK ADAPTER ASSY | 9 | |
| 50MIT65B0012 | WING JACK ADAPTER (2 EA REQ) | 2 | |
| 513.27.12.062 | MAINTENANCE ADAPTER CABLE, FLAP | 1 | |
| 52-876 | THREADED SHANK ADAPTER CARBIDE DRILL - SHORT #40 | 1 | |
| 52-877 | THREADED SHANK ADAPTER CARBIDE DRILL - SHORT #30 | 1 | |
| 52-879 | THREADED SHANK ADAPTER CARBIDE DRILL - SHORT #21 | 1 | |
| 52-882 | THREADED SHANK ADAPTER CARBIDE DRILL - SHORT #10 | 2 | |
| 52-884 | THREADED SHANK ADAPTER CARBIDE DRILL - SHORT 3/16" | 1 | |
| 52-885 | THREADED SHANK ADAPTER CARBIDE DRILL - SHORT 1/4" | 1 | |
| 5254-1 | ANGLE TUBE ADAPTER AND NOZZLE | 6 | |
| 5268-C-12 | CABLE - ADAPTER TWO SINGLE BANANA PLUG | 1 | |
| 5268-C-48 | CABLE - ADAPTER TWO SINGLE BANANA PLUG | 1 | |
| 5268-C-60 | CABLE - ADAPTER TWO SINGLE BANANA PLUG | 1 | |
| 5268-C-XX | CABLE - ADAPTER - BNC (MALE) TO TWO SINGLE STACKABLE BANANA PLUGS (RED & BLACK) | 1 | |
| 52680A0000-01 | TEST ADAPTER ACTUATOR ASSY | 1 | |
| 53-29171 | LONG THREADED SHANK ADAPTER DRILL SET | 1 | |
| 53-2921 | THD SHANK ADAPTER DRILL SET 3/4" OAL 4 PC. 3/32"-3/16" | 1 | |
| 53-2922 | THREADED SHANK ADAPTER DRILL SETS | 1 | |
| 53-2961 | THD SHANK ADAPTER DRILL SET 4PC, FRACTIONAL, 1-1/4 | 1 | |
| 53-2962 | THREADED SHANK ADAPTER DRILL SETS | 1 | |
| 53-2971 | THREADED SHANK ADAPTER DRILL | 2 | |
| 53-2972 | THREADED SHANK ADAPTER DRILL SETS | 1 | |
| 53-540AK | DRIVE ADAPTER KIT | 1 | |
| 53-77 | Drill Attachment Conversion Assembly (Includes: 1/4"-28 Adapter 5/32" Chuck) (Add to cart: Add To Cart) | 1 | |
| 53-99757 | ANGLE DRILL UPGRADE KIT ADAPTER DRILLS INCLUDED: | 1 | |
| 53023-T200 | TEST ADAPTER PLATE | 1 | |
| 5398003A | TEST ADAPTER FOR POWER SWITCH | 1 | |
| 5398003B | TEST ADAPTER FOR POWER SWITCH | 1 | |
| 543-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 9 | |
| 54900 | BOX HEAD ADAPTER HOUSING FOR 56573 | 1 | |
| 54901 | BOX HEAD ADAPTER HOUSING FOR 56587 | 3 | |
| 54902 | BOX HEAD ADAPTER HOUSING FOR 56588 | 1 | |
| 54903 | BOX HEAD ADAPTER HOUSING FOR 56589 | 1 | |
| 55-0780-03 | SOURIAU TANK ADAPTER CABLE | 1 | |
| 550T05658-401 | JACKING ADAPTER SET | 1 | |
| 550T09071-001 | GSE 122 - ADAPTER FITTING - PRESSURIZATION TEST | 1 | |
| 56798S0000-01 | TEST ADAPTER 92IT) | 1 | |
| 5698 | UNIT ADAPTOR (CONN ADAPTER KIT RF 16 ADAPTERS: UNIVERSAL ADAPTER) | 1 | |
| 5748 | RF ADAPTER ACCESORIES KIT | 1 | |
| 6404 | VIBREX TRACKER ADAPTER KIT | 1 | |
| 6481 | TEST CONNECTOR ADAPTER SET | 3 | |
| 7011 | ENGINE/IDG OIL SERVICING ADAPTER (AIR/OIL) | 8 | |
| 7789 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 56069 | SET OF SOCKET HOLDER 1/4" WITH RETAINER ADAPTER AND SET OF 32 BITS BIT HOLDER | 1 | |
| 57292 | 57292;PSDAF-102B Adapter Aux/Ext Tank | 1 | |
| 57315 | TORQUE ADAPTER 3/8" - 8 MM (12 EDGES) | 1 | |
| 57316 | TORQUE ADAPTER 3/8" - 10 MM (12 EDGES) | 1 | |
| 57317 | TORQUE ADAPTER 3/8" - 13 MM (12 EDGES) | 1 | |
| 57318 | TORQUE ADAPTER 3/8" - 5/16" (12 EDGES) | 1 | |
| 57319 | TORQUE ADAPTER 3/8" - 3/8" (12 EDGES) | 1 | |
| 57320 | TORQUE ADAPTER 3/8" - 7/16" (12 EDGES) | 1 | |
| 57321 | TORQUE ADAPTER 3/8" - 1/2" (12 EDGES) | 1 | |
| 57322 | TORQUE ADAPTER 3/8" - 9/16" (12 EDGES) | 1 | |
| 57323 | TORQUE ADAPTER 3/8" - 7/32" M7 SPLINE | 1 | |
| 57324 | TORQUE ADAPTER 3/8" - 1/4" M8 SPLINE | 1 | |
| 57325 | TORQUE ADAPTER 3/8" - 9/32" M9 SPLINE | 1 | |
| 57326 | TORQUE ADAPTER 3/8" - 5/16" M10 SPLINE | 1 | |
| 57327 | TORQUE ADAPTER 3/8" - 3/8" M12 SPLINE | 1 | |
| 57328 | TORQUE ADAPTER 3/8" - 7/16" M14 SPLINE | 1 | |
| 57329 | TORQUE ADAPTER 3/8" - 1/2" M16 SPLINE | 1 | |
| 57330 | TORQUE ADAPTER 3/8" - 9/16" M18 SPLINE | 1 | |
| 57331 | TORQUE ADAPTER 3/8" - 5/8" M20 SPLINE | 1 | |
| 575108-100 | SPL-5257 ADAPTER - TEST (ESCAPE SLIDE DEFLATION) | 1 | |
| 58079 | 58079;55-1045-13 Adapter TS-4530 / 424 KIV 6 | 1 | |
| 582-520 | DRIVE SOCKET ADAPTER 3/8-1/4 INCH | 1 | |
| 5826013-2 | APU GENERATOR ADAPTER COVER | 1 | |
| 5830203-TA | TEST ADAPTER | 1 | |
| 58303 | 58303;Cable PSD40-502 Adapter 727/737/747 | 1 | |
| 58304 | 58304;Cable PSD40-502-1 Adapter 727/737/747 | 1 | |
| 58305 | 58305;Cable PSD40-502-2 Adapter RESERVE 2-3 | 1 | |
| 58306 | 58306;Cable PSD40-502-3 Adapter Wing TankS | 1 | |
| 58307 | 58307;Cable PSD40-502-4 Adapter Center Tank | 1 | |
| 403475 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
| 403561 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
| 406441 | GASEOUS OXYGEN FILLING ADAPTER HOSE | 1 | |
| 442737 | AERO FLI 737 ADAPTER AND SETUP - 737 NG -700, NG -800, MAX -8 SETUP - 737 NG -700, NG -800, MAX -8 ADAPTER - P/N 442737 | 1 | |
| 458728 | VENT-VALVE ADAPTER FOR QUARTER TURN VENT-VALVE (MS) | 1 | |
| 478554 | Henkel 984261 LOCTITE Standard Cartridge to Nozzle Adapter for 300 mL Cartridges | 1 | |
| 5836025-15 | SMALL ADAPTER INSTALLER (IN 5836025-1 KIT) | 1 | |
| 5836025-16 | LARGE ADAPTER INSTALLER (IN 5836025-1 KIT) | 1 | |
| 5836025-17 | SMALL ADAPTER REMOVER (IN 5836025-1 KIT) | 1 | |
| 5836025-18 | LARGE ADAPTER REMOVER (IN 5836025-1 KIT) | 1 | |
| 58828-856A133G02 | TORQUE ADAPTER SET | 1 | |
| 59121 | FLAT ADAPTER 1/4" (F) - 3/8" (M) | 1 | |
| 59122 | FLAT ADAPTER 3/8" (F) - 1/2" (M) | 1 | |
| 59123 | FLAT ADAPTER 1/2" (F) - 3/4" (M) | 1 | |
| 59227 | REVERSIBLE RATCHET ADAPTER 1.1/2" | 1 | |
| 59228 | SET OF ALUMINIUM TORQUE WRENCH 1.1/2" 600 - 3000 Nm (400 - 2000 lb.ft) REVERSIBLE RATCHET ADAPTER 1.1/2 | 1 | |
| 5955282-11 | TORQUE ADAPTER ASSY | 1 | |
| 5963440-1 | Test Adapter - CADC, Remote | 6 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 3 | |
| 5MIT65B01502-1 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 1 | |
| 5SE02274 | OIL ADAPTER PLUG | 1 | |
| 6.62501E 12 | PRESSURE ADAPTER ASSEMBLY, NITROGEN SERVICING UNIT TO AERIAL REFUEL RECEPTACLE | 1 | |
| 60-3200-0010 | FTB NG ADAPTER KIT | 3 | |
| 600200-AST0-1 | Torque adapter tool | 1 | |
| 600200-AST0-2 | Torque adapter tool | 1 | |
| 6002868-T | TEST ADAPTER ( 2 IT) | 1 | |
| 600727 | 1/4 Female Sq. Dr. x 17mm Male Hex Adapter (for EZ-TorQ) | 1 | |
| 602589-001 | A603 ADAPTER STUB CABLE 10CM | 1 | |
| 602751-003 | MDDU ADAPTER CABLE | 1 | |
| 603028-001 | GARDT RJ45 ADAPTER CABLE | 1 | |
| 603218-001 | RJ45 PDL ADAPTER CABLE | 1 | |
| 606027 | Henkel 98181 LOCTITE 14 NPT Semco Cartridge Adapter - Pack of 3 | 1 | |
| 60G2756004N001 | SPLINED FLAP DRIVE ADAPTER KIT | 1 | |
| 60MIT65B00112 | JACKING ADAPTER ASSEMBLY - OUTBOARD WING WBL 938.8 | 1 | |
| 61169-101 | TOOL - ADAPTER (INFLATE/DEFLATE) | 1 | |
| 61657-2 | AIRCRAFT ADAPTER WEAR GAUGE - REFUEL | 9 | |
| 628000 | HANDHELD BLACK LIGHT (EV6000) – P/N: 628000 - TYPE G ADAPTER - MUST HAVE AN AC PLUG, | 2 | |
| 628A160-A | FUEL ADDITION LINE LEAK TEST ADAPTER ASSEMBLY | 1 | |
| 635-6382-001 | 678P-1/2 (ASI-209-X) TEST SET ADAPTER FOR 628T-1/1B | 1 | |
| 63605-001 | ALTERNATE BLEED AIR SOURCE (ABAS) KIT (REGULATOR P/N 63605−101, AIR SUPPLY ADAPTER 63605-104, AIR HOSE P/N 63605−105) | 3 | |
| 63605-105 | 63605-101, AIR SUPPLY ADAPTER 63605-104, AIR HOSE | 1 | |
| 63801-8901 | Crimp Adapter For DIN style dies In Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8902 | Crimp Adapter for 35mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8903 | Crimp Adapter for 22mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | 1 | |
| 63801-8906 | Crimp Adapter for Crimp Dies | 1 | |
| 6429918-1 | Torque Wrench Adapter | 1 | |
| 6429932-1 | ADE Nut Adapter 1 | 1 | |
| 64804 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1/2 NPT MALE X 1/2" | 1 | |
| 64812 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1" NPT X 1" | 1 | |
| 64882-101 | VACUUM ADAPTER USE WITHMETAL PACKING FIXTURES | 1 | |
| 64ME65B00713 | FRONT ADAPTER AND YOKE - ENGINE HANDLING | 1 | |
| 650-0320 | PIT ADAPTER WITH SOFTWARE | 1 | |
| 65200TAAI233PE | BREAK TORQUE ADAPTER (2it) | 1 | |
| 653-5044-001 | TEST ADAPTER BOX | 1 | |
| 65346-101 | OUTLET PORT ADAPTER 65346-101 | 1 | |
| 6645000002-001 | MAINTENANCE COMPUTER INTERFACE ADAPTER (MCIA) | 3 | |
| 6773B030000 | TEST ADAPTER (2 IT) | 1 | |
| 6799217-200 | FLIGHT STATION TEMPERATURE INDICATOR ADAPTER CABLE | 4 | |
| 68060-AM1C-27 | AIR DRIVEN GENERATOR TEST ADAPTER P/N SPL-11921 | 1 | |
| 687-7803 | USB TO RS232 ADAPTER CABLE | 1 | |
| 6875500-4 | INLET ADAPTER TO QUICK DISCONNECT | 1 | |
| 68D110031-1001 | LOX CONVERTER VENT ADAPTER TUBE CONNECTING ADAPTER | 1 | |
| 68D110031-1001 | LOX CONVERTER VENT ADAPTER TUBE CONNECTING ADAPTER | 1 | |
| 68D310053-1003 | PSD-90 F-15 ADAPTER KIT | 1 | |
| 69-687-22 | AC/DC ADAPTER 6V | 1 | |
| 69002793-001 | 69000789-002 ADAPTER FOR 69000789-001 | 1 | |
| 690605 | TORX ADAPTER N°T0 (ELTA) | 1 | |
| 69ME65B00713 | ACCESSORY ADAPTER - HOIST SYSTEM, JT9D-7 ENGINE | 3 | |
| 6F3260G00131 | PORT. MLG WOW, SWITCH TEST BOX ADAPTER HARNESS | 1 | |
| 6F6300G00131 | MGB PRESERVATION ADAPTER TOOL | 1 | |
| 6F6521G00131 | TROLLEY ADAPTER IGB SUPPORT | 1 | |
| 6F6521G001314 | TROLLEY ADAPTER IGB SUPPORT | 1 | |
| 6MIT65B00112 | SPL-5114 ADAPTER - VENTILATION, FUEL TANK | 6 | |
| 6MIT65B01201-1 | WRENCH ADAPTER - NUT, LOWER DRAG BRACE, WING LANDING GEAR | 3 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 6MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
| 6MIT65B01503 | Torque Wrench Adapter | 3 | |
| 6MIT65B04017 | LE FLAP TORQUE TUBE COUPLING LUBE ADAPTER SET | 1 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 6SF2383 | FUEL/OIL QUANTITY ADAPTER CABLE | 1 | |
| 7-6915-1 | TEST CABLE ADAPTER 7-6915-1 (FOR SLIDE 67952-10401 ONLY) | 1 | |
| 70001-T5 | Torque Wrench Adapter | 2 | |
| 70001T18 | Torque Wrench Adapter | 1 | |
| 702941-01 | TPCU MAINTENANCE TEST BOARD (TEST ADAPTER ) MFR : OLWJ2 ATA : 44-23-25 | 1 | |
| 703A91-4105-02 | JACK ADAPTER PAD MLG | 1 | |
| 704-0795-001 | AUDIO ADAPTER CABLE | 1 | |
| 704-1823-001 | PORTABLE DATA LOADER ADAPTER CABLE ASSY | 3 | |
| 704-2383-001 | CABLE ADAPTER CABLE | 1 | |
| 704-2389-001 | SPL-14314 ADAPTER CABLE - HONEYWELL PDL TO EEC DATA LOAD CABLE 704-2389-001 97896 | 3 | |
| 704-2389-001 97896 | SPL-14314 Adapter Cable - Honeywell PDL to EEC Data Load Cable 704-2389-001 97896 | 1 | |
| 704-3058-002 | SSCVR/HFR5-V ADAPTER CABLE | 1 | |
| 70456 | THREADED DRILL ADAPTER 1/4" HEX X 1/4-28 THD | 3 | |
| 70700-20241-041-TM | MANUAL,TECH ADAPTER HOISTING | 1 | |
| 70700-20426-041 | MAIN AND TAIL ROTOR BLADE ADAPTER ASSEMBLY | 1 | |
| 72007-12C P35 | Disk adapter puller rod | 1 | |
| 72051622-1 | ATP ADAPTER CABLE | 1 | |
| 7229A42 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 1/4" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
| 7229A44 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 3/8" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
| 727PTK | 727 PITOT STATIC ADAPTER KIT | 1 | |
| 73-0067-02 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
| 730N/65 | TORQUE WRENCH WITH ADAPTER (0-600 RANGE) | 1 | |
| 730N/65 | TORQUE WRENCH WITH ADAPTER | 1 | |
| 7311TD16031-501 | Fuel Filter Bowl Adapter GE90 | 1 | |
| 73318 | Female Ship Adapter 3/4 radius | 2 | |
| 73318-1 | FEMALE SHIP ADAPTER 3/4 RADIUS (B757) | 1 | |
| 73318-2 | FEMALE SHIP ADAPTER 3/4 RADIUS | 2 | |
| 73740 | IMPACT ADAPTER 1.1/2" (F) -1" (M) NON SPARKING Cu-Be | 1 | |
| 73743 | IMPACT ADAPTER 1.1/2" (F) - 1" (M) NON SPARKING Al-Bron | 1 | |
| 76492 | IMPACT ADAPTER 3/4" (F) - 1/2" (M) NON SPARKING Al-Bron | 1 | |
| 76495 | IMPACT ADAPTER 3/4" (F) - 1/2" (M) NON SPARKING Cu-Be | 1 | |
| 76711 | IMPACT ADAPTER 1/2" (F) - 3/4" (M) NON SPARKING Cu-Be | 1 | |
| 76712 | IMPACT ADAPTER 1/2" (F) - 3/4" (M) NON SPARKING Al-Bron | 1 | |
| 76713 | IMPACT ADAPTER 3/4" (F) - 1" (M) NON SPARKING Cu-Be | 1 | |
| 76714 | IMPACT ADAPTER 3/4" (F) - 1" (M) NON SPARKING Al-Bron | 1 | |
| 76715 | IMPACT ADAPTER 1" (F) - 3/4" (M) NON SPARKING Cu-Be | 1 | |
| 76716 | IMPACT ADAPTER 1" (F) - 3/4" (M) NON SPARKING Al-Bron | 1 | |
| 77051 | INLET ADAPTER 3/8IN NPT | 1 | |
| 77203 | TERMINAL PROBE ADAPTER SET | 1 | |
| 79000 | ANGLE LUBE ADAPTER AND NOZZLE | 1 | |
| 79793 | USB ADAPTER FOR 2 WAY RADIO 79787-79788 | 1 | |
| 733539 | GOVERNOR TEST ADAPTER KIT | 1 | |
| 751676 | GOVERNOR TEST ADAPTER KIT | 1 | |
| 751845 | PLATE ADAPTER 2 IT | 1 | |
| 752559 | IDG ADAPTER KIT | 1 | |
| 762246 | QAD ADAPTER ASSY | 1 | |
| 772896 | QAD ADAPTER KIT | 3 | |
| 773064 | RS232 Cable Adapter (6P6C) | 1 | |
| 773069 | Serial to USB Adapter | 1 | |
| 3001069 | STRUT ADAPTER ATR 72 | 1 | |
| 3727479 | TEST ADAPTER (2IT) | 1 | |
| 3938033 | TORQUE ADAPTER (1/2 INCH DRIVE) | 1 | |
| 3938068 | TORQUE ADAPTER (1/2 INCH DRIVE) | 1 | |
| 4046600 | COOLER ADAPTER UNI UA 60J | 1 | |
| 4713966 | TORQUE ADAPTER MAIN WHEEL | 1 | |
| 4766266 | TORQ ADAPTER ASSY | 1 | |
| 5012373 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 5398003 | TEST ADAPTER POWER SWITCH | 1 | |
| 6796395 | HOLDING ADAPTER THRUST NUT | 1 | |
| 6796535 | AXIAL CLEARANCE ADAPTER GAUGE | 3 | |
| 6796663 | Front Adapter Compressor Housing Assy | 1 | |
| 6796664 | Rear Adapter Compressor Housing Assy | 1 | |
| 6797776 | ROLLS-ROYCE ALLISON ADAPTER REAR TORQUEMETER & SAFETY COUPLING ASSY | 2 | |
| 6799744 | COLLET, ADAPTER 1ST STG WHEEL BALANCE | 1 | |
| 6799790 | ENGINE TURNING ADAPTER . | 3 | |
| 6847740 | ADAPTER – ADAPTER MOUNTING, VERTICAL VIBRATION PICKUP | 1 | |
| 6872550 | COMPRESSOR ROTOR COUPLER ADAPTER HOLDER | 2 | |
| 6872646 | GUIDE一SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6872832 | COMPRESSOR ADAPTER COUPLING PULLER | 2 | |
| 6873007 | ADAPTER----COMPRESSOR ADAPTER COUPLING | 1 | |
| 6877023 | SECONDARY SUPPORT RING ADAPTER LOCATES AND SEALS SECONDARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 6891195 | LOANER TOOL (SPLINE ADAPTER PULLER) | 2 | |
| 6893397 | INSTALL FUEL PUMP SPLINED ADAPTER BEARING DRIFT | 2 | |
| 6893501 | DRIFT - SPUR ADAPTER GEARSHAFT | 1 | |
| 6893503 | GAGE--SPLINE, SPUR ADAPTER GEARSHAFT AND SECOND-STAGE SPLINED ADAPTER CHECKING | 2 | |
| 6897008 | FACE PLATE ADAPTER MOUNTS MACHINING AND WELD FIXTURES TO LATHE. | 1 | |
| 6897868 | GASIFIER TURBINE SPLINED ADAPTER PULLER | 2 | |
| 7901943 | Plug Adapter Kit | 1 | |
| 29315204 | AIRFRAME TEST ADAPTER KIT | 1 | |
| 29335501 | RADS-AT ADAPTER KIT | 1 | |
| 34012381 | TORQUE ADAPTER ASSY | 2 | |
| 35030006 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 1 | |
| 52101050 | 7750-1-MOUNTING ADAPTER FOR 7750 DISP | 1 | |
| 58250005 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 2 | |
| 58250010 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 3 | |
| 58250020 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 2 | |
| 58250040 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 2 | |
| 58250065 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 2 | |
| 58253004 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 1 | |
| 58253005 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 1 | |
| 58253010 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 1 | |
| 58253020 | QUICKRELEASE RATCHET INSERT ADAPTER (STAHLWILLE) | 1 | |
| 58290010 | INSERT ADAPTER STAHLWILLE | 1 | |
| 58290012 | 7370/10-2-INSERT ADAPTER 9X12MM FOR SR F | 1 | |
| 58290040 | INSERT ADAPTER STAHLWILLE | 1 | |
| 58290042 | 7370/40-2-INSERT ADAPTER 14X18MM FOR SR | 1 | |
| 66051136 | VENT ADAPTER ASSEMBLY | 1 | |
| 67001360 | LAMP HOLDER ADAPTER WITH RELEASE BUTTON | 1 | |
| 67001361 | LAMP HOLDER ADAPTER WITHOUT RELEASE BUTTON | 1 | |
| 311694202 | CABLE CABLE ADAPTER FOR GFT2 | 1 | |
| 460002502 | CHARGING ADAPTER - MLG A320NEO | 10 | |
| 460004586 | Torque Adapter − NLG Ring Nut | 1 | |
| 460006201 | F100 ADAPTER TURNING NUT | 2 | |
| 460006232 | LOAD CELL AND ADAPTER - MLG A320NEO | 3 | |
| 460006233 | PRESS ADAPTER - MLG A320NEO | 4 | |
| 460006234 | OFFSET ADAPTER - MLG A320NEO | 4 | |
| 460006487 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 6 | |
| 460006489 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006490 | TEST ADAPTER - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460006492 | Test Adapter | 4 | |
| 460007011 | MLG ADAPTER A330 | 27 | |
| 460007230 | TORQUE MLG ADAPTER | 29 | |
| 460007260 | BOTTOM PRESS ADAPTER - MLG A320NEO | 1 | |
| 460007363 | REAMER & ADAPTER PAD | 1 | |
| 460007365 | REAMER & ADAPTER PAD | 1 | |
| 460007384 | TOP PRESS ADAPTER | 2 | |
| 502000076 | TEST ADAPTER | 1 | |
| 532744382 | FILLING ADAPTER FOR TTA. PN 47142 | 1 | |
| 532810261 | VENT ADAPTER CENTER TANK | 1 | |
| 533213728 | STAHLWILLE ADAPTER DIA 0.30-32 UNF | 1 | |
| 533213782 | TOOL ADAPTER MLG | 1 | |
| 537220251 | Anti Torque Adapter LPT Nut, 537220251LHT Dwg No.(537220251) | 1 | |
| 5000249902 | POWER ADAPTER NO.2 GTM96600-6024-T2A | 1 | |
| 4920010918719 | PSD-90 F-15 ADAPTER KIT | 1 | |
| 734-92713 | TORQUE ADAPTER (EQUIVALENT TO 771-16957) | 1 | |
| 734-92715 | TORQUE ADAPTER (EQUIVALENT TO 771-16959) | 1 | |
| 734-92717 | TORQUE ADAPTER (EQUIVALENT TO 771-16961) | 1 | |
| 734-92718 | TORQUE ADAPTER (EQUIVALENT TO 771-16963) | 1 | |
| 734-93370 | Stop Nut Adapter (2IT) | 1 | |
| 735/20 | FINE-TOOTH RATCHET INSERT ADAPTER 1/2", STAHLWILLE | 3 | |
| 735/5 | FINE-TOOTH RATCHET INSERT ADAPTER 3/8", STAHLWILLE | 5 | |
| 7370/10 | INSERT ADAPTER STAHLWILLE | 1 | |
| 7370/40 | INSERT ADAPTER STAHLWILLE | 1 | |
| 737PTK | 737 PITOT STATIC ADAPTER KIT | 1 | |
| 7440M-5 | TORQUE RESPONSIVE ADAPTER 5/32" DIA. FLUSH | 1 | |
| 75221185 | TORQUE ADAPTER 11/16" SPLINE DRIVE | 1 | |
| 75416-T1 | TORQUE ADAPTER AND SPLINE WRENCH | 1 | |
| 757PTK | 757 PITOT STATIC ADAPTER KIT | 1 | |
| 75D68000-001 | AFT JACK ADAPTER SET | 1 | |
| 767669C | QAD ADAPTER IDG | 1 | |
| 768961-1 | SYNCHROPHASER ADAPTER UNIT | 1 | |
| 77057TA | THREADED ADAPTER CONE WHEEL | 1 | |
| 77144-T11 | SPL-5278 - ADAPTER - TORQUE, AUTOBRAKE PRESSURE CONTROL MODULE SHUTOFF VALVE | 1 | |
| 77144-T6 | SPL-5279 ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
| 775538-3-TA | TEST ADAPTER (2IT) | 1 | |
| 7789-2 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 7789-3 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 7789-4 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 7789-5 | STAHLWILLE ADAPTER SQUARES | 1 | |
| 78100011543 | ROSE ANALYSIS UNIT ADAPTER CABLE - 17TES0072 | 1 | |
| 78100011547 | ROSE ANALYSIS UNIT - RECORDER USB FDAU SIMULATOR (RUFS) (RI) ADAPTER - 17TES0076 | 1 | |
| 78169-T2 | SPL-5280 - ADAPTER - TORQUE, BODY GEAR STEERING MODULE PRESSURE SWITCH | 1 | |
| 79000218-1 | TEST UNIT ADAPTER - FCE BATTERY | 1 | |
| 79000494-1 | ANGLE LUBE ADAPTER & NOZZLE | 3 | |
| 79000494-2 | ANGLE LUBE ADAPTER & NOZZLE | 1 | |
| 7A054 | MARVEL SPINNER ADAPTER KIT | 1 | |
| 7A067 | BALANCE ADAPTER KIT | 1 | |
| 7A070 | PROPELLER BALANCE ADAPTER KIT | 1 | |
| 7C2189 | ADAPTER ADAPTER REMOVAL DRAIN MAST | 1 | |
| 7C2218 | ADAPTER ADAPTER SET - VSV ACTUATOR | 1 | |
| 7HEL061 | MAIN ROTOR BALANCE ADAPTER KIT | 1 | |
| 7HEL069 | BALANCING ADAPTER KIT | 1 | |
| 7HEL084 | MAIN ROTOR BALANCE ADAPTER KIT | 1 | |
| 7HEL092 | MAIN ROTOR BALANCE ADAPTER KIT | 1 | |
| 7HEL153N2 | BALANCING ADAPTER KIT | 1 | |
| 800-0630 | USB429WIN ARINC 429 ADAPTER KIT | 6 | |
| 800-400-70 | SHAKER TABLE ADAPTER (MEGGITT) | 1 | |
| 80030-4 | PMAT INTERFACE ADAPTER CABLE | 5 | |
| 80072-4 | CABLE ADAPTER , PMAT TO EFB | 5 | |
| 80079-1 | RJ45 ADAPTER CABLE | 2 | |
| 80080-1 | PMAT 2000 RJ45 Adapter Kit | 7 | |
| 80086-2 | PMAT 2000 to ERJ APU adapter cable | 2 | |
| 801308-S58-2 | VALVE INLET TEST ADAPTER | 1 | |
| 801333-S91-3 | VALVE STEM ADAPTER | 1 | |
| 802-0320 | RSUII ADAPTER w/SOFTWARE | 2 | |
| 80321-S58-12 | REGULATOR TEST ADAPTER 0.500-14 ANPT THREADS | 1 | |
| 803213-S58-1 | REGULATOR TEST ADAPTER | 1 | |
| 803213-S58-10 | VALVE INLET TEST ADAPTER AVOX (SAFRAN) | 1 | |
| 803213-S58-12 | REGULATOR TEST ADAPTER | 1 | |
| 803213-S58-2 | REGULATOR TEST ADAPTER AVOX SYSTEMS (SAFRAN) | 1 | |
| 8042C | CONNECTING ROD BUSHING INSTALLATION AND REMOVAL TOOL ADAPTER SET | 1 | |
| 8072C | CONNECTING ROD BUSHING INSTALLATION AND REMOVAL TOOL ADAPTER KIT | 1 | |
| 8074503-0401 | TCAS ADAPTER PANEL | 1 | |
| 80800-1 | PMAT 2000 RJ4S ADAPTER KIT | 1 | |
| 80955-1 | TOOL - CABLE ADAPTER PORT UNIT | 5 | |
| 81012622-01 | JACK ADAPTER NLG | 1 | |
| 831411-1 | SEAL ROTOR AND SPLINED ADAPTER REMOVAL/ INSTALLATION KIT (CONSISTS OF 831411-11 SEAL PULLER, 831411-13 SEAL INSTALLER, AND 831411-15 SPLINE PULLER) | 1 | |
| 831411-117 | ENGINE SPLINE ADAPTER REMOVAL TOOL | 1 | |
| 831411-2 | SPLINED ADAPTER KIT | 2 | |
| 833203-1 | Torque Wrench Adapter Set | 1 | |
| 833257-1 | Gage Adapter Set | 1 | |
| 833482-1 | SPECIAL ADAPTER WRENCH | 1 | |
| 833496-1 | SET ADAPTER SEAL | 1 | |
| 833498-1 | SET ADAPTER SEAL | 1 | |
| 833500-1 | SET ADAPTER SEAL | 1 | |
| 833510-1 | SET ADAPTER SEAL | 1 | |
| 833512-1 | SET ADAPTER SEAL | 1 | |
| 833513-1 | SET ADAPTER SEAL | 1 | |
| 833515-1 | SET ADAPTER SEAL | 1 | |
| 833516-1 | SET ADAPTER SEAL | 1 | |
| 833517-1 | SET ADAPTER SEAL | 1 | |
| 833518-1 | SET ADAPTER SEAL | 1 | |
| 833668-1 | Side Port Pressure Adapter | 1 | |
| 833835-4 | CABIN PRESSURE SAFETY VALVE TEST ADAPTER B | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834012-1 | Backlash Adapter | 1 | |
| 834033-1 | BEARING REMOVAL SPLIT PLATE ADAPTER ASSY | 1 | |
| 834119-2 | SUPPORT ADAPTER (TO SUPPORT ENGINE IN PORTABLE ENGINE STAND) | 1 | |
| 834307-1 | Torque Adapter | 1 | |
| 834389-1 | SUPPORT ADAPTER (TO SUPPORT ENGINE IN PORTABLE ENGINE STAND) | 1 | |
| 834390-1 | SUPPORT ADAPTER (TO SUPPORT ENGINE IN PORTABLE ENGINE STAND) | 1 | |
| 834414-3 | Mounting Adapter | 1 | |
| 834415-4 | Shaft Adapter | 1 | |
| 834526-1 | DUCT TEST ADAPTER (COOLING AIR INLET) | 1 | |
| 834527-1 | DUCT TEST ADAPTER (BLEED AIR INLET) | 1 | |
| 834628-1 | Spring Scale Centering Adapter Plate | 1 | |
| 834628-1PM | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 834784-1 | TOOL: ADAPTER SET | 1 | |
| 834805-1 | MAINTENANCE ADAPTER SET | 1 | |
| 834826-1 | Bearing Removal Adapter | 1 | |
| 834833-1 | Bearing Removal Adapter | 1 | |
| 834834-1 | Torque Adapter | 1 | |
| 834834-5 | TORQUE ADAPTER BAR | 1 | |
| 834835-1 | Torque Adapter | 1 | |
| 835320-1 | Duct Test Adapter (Bleed air side) | 1 | |
| 835323-1 | Duct Test Adapter (Cooling air side) | 1 | |
| 835643-1 | Mounting Adapter | 1 | |
| 835790-1 | Air press adapter | 1 | |
| 8400-23 | LED FLASHLIGHT W/ ADAPTER TIP | 2 | |
| 8405A | SOCKET WHEEL ADAPTER 3” MAIN / E 175/E195 | 1 | |
| 8457784 | M-10 ADAPTER SET | 1 | |
| 846-178-900 | ROTATION ADAPTER – CORE MODULE | 1 | |
| 846-178-900-1 | ROTATION ADAPTER – CORE MODULE | 1 | |
| 85130B | 3.5MM TO 7MM ADAPTER KIT | 1 | |
| 8524N11 | FLEX SOCKET ADAPTER SETS | 1 | |
| 85255A11 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 42 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
| 85255A13 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 156 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
| 853596S | SOCKET WHEEL ADAPTER 3” NOSE / E 175/E195 | 1 | |
| 8546607 | REAR ADAPTER DRESSING STAND | 3 | |
| 8547213 | REAR ADAPTER FOR ENGINE DRESSING / PARKING STAND | 4 | |
| 8547215 | LIFTING SLING ADAPTER (FRONT) (GSE7100003) | 4 | |
| 8547216 | LIFTING SLING ADAPTER (REAR) (GSE7100004) | 3 | |
| 856A1000G09 | TORQUEING ADAPTER - NO. 3 BRG LOCKING NUT | 7 | |
| 856A1006 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR NUTS (TORQUE ADAPTER) | 1 | |
| 856A1006 G01 | Torque Adapter Wrench - Compressor Stator To Support | 11 | |
| 856A1006G01 | Wrench, Torque Adapter - Compressor Stator Nuts (torque adapter) | 11 | |
| 856A1009G02 | FIXTURE LIFT ADAPTER VERT | 11 | |
| 856A1022P05 | CFM 56-3 TORQUE ADAPTER WRENCH | 6 | |
| 856A1022P06 | CFM 56-3 TORQUE ADAPTER WRENCH | 7 | |
| 856A1036G01 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR TO SUPP | 1 | |
| 856A1084G04 | VSV-VBV ADAPTER CFM56 TES | 27 | |
| 856A1084P50 | HOSE ASSY ADAPTER HOSE V SV HEAD | 3 | |
| 856A1084P51 | HOSE ASSY ADAPTER HOSE V SV ROD | 2 | |
| 856A1084P59 | ACTUATOR PUMP ADAPTER SET | 8 | |
| 856A1258G01 | PIPE ADAPTER | 1 | |
| 856A1336 | TORQUE WRENCH ADAPTER SET G01 & G02 | 5 | |
| 856A1336G02 | TORQUE ADAPTER SET | 20 | |
| 856A1369 | FIXTURE, ADAPTER LINI- GAGE- DATA ACQUISITION SYST | 1 | |
| 856A1369 & P17 | LINIPOT ADAPTER AND ENCODER | 1 | |
| 856A1369 G04 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM G01 | 5 | |
| 856A1369G01 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G02 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G03 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G04 | Fixture Adapter (adapter) | 5 | |
| 856A1467G01 | FUEL MANIFOLD ADAPTER PRESS CK FUEL TOOL | 8 | |
| 856A1469G02 | TORQUE ADAPTER SET | 15 | |
| 856A1523P01 | CORE ENG ROT ADAPTER 5B | 2 | |
| 856A1616G01 | CABLE ADAPTER PDL | 1 | |
| 856A1616G02 | CABLE ADAPTER ENGINE | 17 | |
| 856A1700G05 | ECU SOFTWARE ADAPTER CABLE | 7 | |
| 856A1827G01 | CFM56, ADAPTER TORQUE MEC/HMU | 20 | |
| 856A2304G02 | LIFTING & TURNING ADAPTER - N1/2 | 2 | |
| 856A2335G01 | TORQUING / LOOSENING ADAPTER - N1/2 BRG SUPPORT | 3 | |
| 856A2335G02 | TORQUING / LOOSENING ADAPTER - | 6 | |
| 856A2502 | DRAIN ADAPTER - OIL TANK | 3 | |
| 856A2502G06 | DRAIN ADAPTER - OIL TANK | 13 | |
| 856A2522 | TRUNNION ADAPTER (TRUNNION ADAPTER) | 1 | |
| 856A2525G01 | GUIDE ADAPTER - BOOSTER | 2 | |
| 856A2573G01 | PULLING ADAPTER - LPT SHAFT PLUG | 6 | |
| 856A2607G01 | LOCKING ADAPTER ENGINE CORE -CFM56 | 4 | |
| 856A2632G01 | PULLER ADAPTER (.250 THREAD) | 23 | |
| 856A2659 | FILTER ADAPTER - DRY OUT | 1 | |
| 856A2659G01 | FILTER ADAPTER - DRY OUT | 5 | |
| 856A2663 | PULLER ADAPTER - SPLITTER FAIRING | 1 | |
| 856A2663G01 | Puller Adapter - Splitter Fairing (puller adapter) | 24 | |
| 856A2668 | KIT, PULLER ADAPTERS (PULLER ADAPTER KIT) | 3 | |
| 856A2668G02 | PULLER ADAPTER KIT | 14 | |
| 856A2668P24 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P28 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P30 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P32 | PULLER ADAPTER .250 | 5 | |
| 856A2668P37 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P43 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2685G02 | PULLER ADAPTER - OIL INLET COVER | 1 | |
| 856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 5 | |
| 856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
| 856A2700 | PULLER ADAPTER - FAN BLADE SPACERS | 2 | |
| 856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
| 856A2700G01 | PULLER ADAPTER - FAN BLADE SPACERS | 13 | |
| 856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | 1 | |
| 856A2706G03 | BEAM TORQUE ADAPTER - FAN | 5 | |
| 856A2717G01 | LOCKING ADAPTER - CORE ENGINE | 19 | |
| 856A2732 | FLANGE, ADAPTER - TGB (FLANGE ADAPTER) | 1 | |
| 856A2732G01 | FLANGE ADAPTER - TGB | 5 | |
| 856A2776G01 | TEE ADAPTER PRESS CHECK FRV | 4 | |
| 856A2787 | BASEPLATE - FUEL PUMP ADAPTER SUPPORT (BASEPLATE) | 1 | |
| 856A2787G01 | SUPPORTING ADAPTER - BASE FUEL PUMP | 5 | |
| 856A2797 | OIL TEMPERATURE ADAPTER LEAD CABLE | 1 | |
| 856A2797G01 | OIL TEMPERATURE ADAPTER LEAD CABLE | 7 | |
| 856A2820G01 | LOOSENING ADAPTER - LPT COUPLING | 2 | |
| 856A2902G02 | DUMMY ADAPTER - FAN DISK | 5 | |
| 856A2903G01 | TORQUING BEAM ADAPTER - FAN | 11 | |
| 856A2985G01 | DRIVE ADAPTER - BOOSTER LPT SHAFT | 6 | |
| 856A2992G01 | LOOSENING ADAPTER - LPT COUPLING | 4 | |
| 856A3267 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
| 856A3267G02 | TEST RIG ADAPTER - SUMP OIL TUBE | 10 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 6 | |
| 856A3329G02 | TOOL SET - ADAPTER #1 /#2 AIR IMPINGMENT CHECK | 3 | |
| 856A3362G01 | PULLER ADAPTER - LUBE UNIT FILTERS | 1 | |
| 856A3419G02 | OIL INLET COVER ADAPTER PULLER | 23 | |
| 856A3455G01 | BALANCING DRIVE ADAPTER - FWD LPT SHAFT | 2 | |
| 856A3466 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | 1 | |
| 856A3466G01 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | 6 | |
| 856A3471 | DRIVE SPLINE ADAPTER FUEL PUMP | 1 | |
| 856A3471P01 | DRIVE SPLINE ADAPTER - FUEL PUMP | 4 | |
| 856A3471P02 | DRIVE SPLINE ADAPTER - FUEL PUMP | 11 | |
| 856A3499G01 | TORQUING/LOOSENING ADAPTER - N1 | 1 | |
| 856A3500G01 | PULLER ADAPTER - FAN BLADE SPACER | 17 | |
| 856A3501G04 | LOOSENING ADAPTER - LPT COUPLING NUT | 15 | |
| 856A3509G01 | ADAPTER LOCKING | 15 | |
| 856A3510G04 | LIFTING & TURNING ADAPTER - N1/2 | 10 | |
| 856A3515G04 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 9 | |
| 856A3524 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 1 | |
| 856A3524 G01 | Tool Set Drive Adapter ‐ Booster and LPT | 15 | |
| 856A3524G01 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT | 15 | |
| 856A3544 | FLANGE, ADAPTER - TGB | 1 | |
| 856A3544 G01 | Flange Adapter ‐ TGB | 1 | |
| 856A3544G01 | FLANGE, ADAPTER - TGB | 1 | |
| 856A3544G02 | FLANGE, ADAPTER - TGB | 1 | |
| 856A3544G03 | Flange Adapter TGB | 8 | |
| 856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | 1 | |
| 856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 6 | |
| 856A3557G01 | TOOL D-SEAL ADAPTER LUBE UNIT | 23 | |
| 856A3601G01 | DRAIN ADAPTER - LUBE UNIT | 10 | |
| 856A3627G01 | TESTING PRESSURE ADAPTER - FUEL | 8 | |
| 856A3728G01 | SEALING PLATE & LOCKING ADAPTER - | 12 | |
| 856A3728G01 | CORE ENGINE SEALING PLATE AND LOCKING ADAPTER | 12 | |
| 856A3728G02 | SEALING PLATE & LOCKING ADAPTER - | 14 | |
| 856A3810G01 | AIR ADAPTER - ENGINE SUMP | 11 | |
| 856A3901G01 | ROTATION ADAPTER - CORE DRIVE PAD | 1 | |
| 85J1028 - 001 | JACK ADAPTER NLG | 1 | |
| 85J1028-001 | JACK ADAPTER - NLG | 1 | |
| 8600010 | OIL FILLER ADAPTER PIPE | 1 | |
| 86000306-1 | USB RT ANGLE ADAPTER (SEE REMARKS) | 1 | |
| 8765 | P-LEAD ADAPTER (EARLY S20) | 1 | |
| 8766 | P-LEAD ADAPTER (S200,S600) | 2 | |
| 8767 | P-LEAD ADAPTER (D2000, D3000) | 2 | |
| 8768 | P-LEAD ADAPTER (COMPLETE SET) | 2 | |
| 9061 | WHEEL INFLATOR ADAPTER - 1 PACK = QTY 10 | 4 | |
| 88657 | Henkel 97208 LOCTITE 10 ml Syringe Airline Adapter - Pack of 2 | 1 | |
| 88678 | Henkel 97245 LOCTITE 30 55 mL Syringe Airline Adapter - Pack of 2 | 3 | |
| 906224 | BALL ADAPTER BEARING | 1 | |
| 8600222 | INHIBITING ADAPTER FOR LP-FUEL PUMP | 2 | |
| 8600223 | INHIBITING ADAPTER FOR HP-FUEL | 2 | |
| 8600224 | DRAIN ADAPTER FOR OSU INHIBITING | 1 | |
| 8600337 | TORQUE ADAPTER OR TRAVERSE TOOL | 5 | |
| 8600429 | TORQUE ADAPTER - PART NO. 8600429 | 5 | |
| 8644425-10 | MUNTION LOADING ADAPTER ADU-53 | 1 | |
| 8807N-4 | CAP ADAPTER FOR IN-80A | 1 | |
| 8C2134 | FIXTURE, ADAPTER - GENSPECT (AFT END DOWN) | 1 | |
| 8C2173G01 | Tool Kit, Adapter - Electronic Protractor Igv | 1 | |
| 8C2525 | LIFT ADAPTER – BRG 1 & 2 | 1 | |
| 8C3407 | FIXTURE - LIFT - AGBX - ADAPTER FUEL PUMP | 1 | |
| 8C3488 | SET - PROTECTION PLUGS - AGBX - ADAPTER FP MANIFOLD | 1 | |
| 8C3488G01 | Set protection plugs agbx adapter fp manifold | 1 | |
| 8MIT65B01231-1 | TORQUE ADAPTER - INNER CYLINDER NUT, BODY LANDING GEAR | 1 | |
| 90-380034-1/935 | CALIBRATION ADAPTER TEST BOX | 1 | |
| 900-40900 | AIR PUMP ADAPTER KIT | 1 | |
| 9000218-1 | FCE BATTERY TEST UNIT ADAPTER (TUA)) | 1 | |
| 9000302-001 | LATTICE ADAPTER CABLE | 1 | |
| 9005887-001 | ETHERNET ADAPTER + CABLE | 1 | |
| 902-10034 | Cable Adapter 7310/ATR-42 | 3 | |
| 902-3140-1 | CABLE DC ADAPTER BELL UH-1 | 1 | |
| 9045001 | COMPARATOR - BETA LIGHT : PN 9045001 / MAVOLUX 5032B USB (LUMINANCE ATTACHMENT P/N M516G AND ADAPTER DISK P/N M499G MUST BE USED WITH THE LUXMETER) OR MAVO-MONITOR USB. | 11 | |
| 90210034 | CABLE ADAPTER (FOR V2KATR USE) | 3 | |
| 902415704-V | TEST VACUUM ADAPTER | 1 | |
| 906-10160-1 | DOUBLE INTERRUPTER ADAPTER NON-POLAR | 1 | |
| 907878-1-1 | TORQUE WRENCH ADAPTER SET | 1 | |
| 9142702600 | WRENCH ADAPTER - RING NUT | 1 | |
| 9142729637 | HOOK WRENCH ADAPTER SIZE 28 | 1 | |
| 9171K167 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/8 B-BSPT MAX PSI;2600 | 1 | |
| 9171K168 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-1/2 B-BSPT MAX PSI;2400 | 1 | |
| 9171K169 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/4 B-BSPT MAX PSI;2300 | 1 | |
| 9171K173 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/8 B-BSPT MAX PSI;2600 | 1 | |
| 9171K174 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-1/2 B-BSPT MAX PSI;2400 | 1 | |
| 9171K175 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/4 B-BSPT MAX PSI;2300 | 1 | |
| 9171K232 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/8 MAX PSI;3500 | 1 | |
| 9171K233 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;3000 | 1 | |
| 9171K64 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;3500 | 1 | |
| 9171K65 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-3/8 MAX PSI;3500 | 1 | |
| 9171K66 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;3600 | 1 | |
| 9171K67 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;3600 | 1 | |
| 9171K68 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/2 MAX PSI;3600 | 1 | |
| 92700-10358-043 | FLUSH KIT EKOFLUSH K570 ADAPTER KIT | 1 | |
| 92700-10753-055 | VESPEL SPLINE ADAPTER TOOL KIT | 1 | |
| 9300A925 | PLAYBACK ADAPTER BOARD | 1 | |
| 934826-1 | Bearing Removal Adapter Assembly | 1 | |
| 93A3520759900 | HOSE ADAPTER ALTITUDE SWITCH | 1 | |
| 94-8136 | FUEL SUMP ADAPTER TOOLING | 21 | |
| 9400M83 | Hydraulic Lube System, Adapter Kit (adapter kit) | 1 | |
| 9400M83G01 | HYDRAULIC LUBE SYSTEM ADAPTER KIT (ADAPTER KIT) | 1 | |
| 9400M96G01 | FUEL NOZZLE ADAPTER STAND | 1 | |
| 9426M56G01 | AIR STARTER ADAPTER | 1 | |
| 9441M46 | PLATE, ADAPTER TORQUE | 1 | |
| 9441M46 REV B | PLATE, ADAPTER TORQUE | 1 | |
| 9471M47P01 | OFFSET ADAPTER USED WITH RC2700G01 | 3 | |
| 9471M48P01 | CORE ENG ROT ADAPTER 7B | 5 | |
| 9487M99 | FIXTURE ADAPTER (ITEM 12 OF 9C1887) | 1 | |
| 949 | T/E ADAPTER F 1/2 M 3/4 | 1 | |
| 95-92000-0203 | MAIN WHEEL ADAPTER NUT | 1 | |
| 950-006 | 1 ADAPTER FOR TIRE PRESSURE GAUGE (PN | 1 | |
| 956A1114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELLER | 1 | |
| 956A1114G01 | Fixture Torque Adapter To Install/Remove Tube Impell | 1 | |
| 956A1128G01 | Fixture Adapter Hpc Rotor Components | 1 | |
| 956A1128G02 | Fixture Adapter Hpc Rotor Components | 1 | |
| 956A1176 | TOOL KIT - ADAPTER - ELECTRONIC PROTRACTOR VSV | 1 | |
| 956A1176G01 | ELECTRONIC PROTRACTOR VARIABLE STATOR VANE (VSV) ADAPTER TOOL KIT | 1 | |
| 956A1185 | FIXTURE - ASSY ADAPTER - GENSPEC HPCR/HPTR | 1 | |
| 956A1320 | BRACKET SET - ADAPTER - TRF | 1 | |
| 956A1607G01 | ADAPTER ADAPTER - VSV | 7 | |
| 956A1608G01 | FUEL PUMP ADAPTER (LEAP) | 4 | |
| 956A1610P01 | DRIVE ADAPTER - CORE ENGINE ROTATION | 3 | |
| 956A1613G01 | FIRE CONDITIONING ADAPTER (LEAP) | 6 | |
| 956A1627G01 | BSI ADAPTER KIT, LEAP-1A/1B | 1 | |
| 956A3114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELL | 1 | |
| 956A3608G01 | TOOL / SPL-14572 ADAPTER - MAIN FUEL PUMP | 3 | |
| 956A6046 | LIFTING BRACKET SET/ ADAPTER PLATE | 3 | |
| 956A6046G02 | FAN ADAPTER SPHERICAL JOINT (NEO) | 4 | |
| 956A6046G03 | FAN MODULE ADAPTER PLATE AND SPHERICAL JOINT | 5 | |
| 956A6046G03 | FAN MODULE ADAPTER | 5 | |
| 956A6046 | ADAPTER PLATE AND SPHERICAL JOINT ,FAN MOD | 3 | |
| 956A6078 | KIT - BLANK OFF & ADAPTER - SHROUD FAN FRAME | 1 | |
| 956A6207 | FLANGE ADAPTER - TGB | 1 | |
| 956A6210 | FLANGE ADAPTER - TGB | 1 | |
| 956A6241 | DRIVE SPLINE ADAPTER - TGB | 1 | |
| 956A6250 | FLANGE ADAPTER - AGB | 1 | |
| 956A6257 | FLANGE ADAPTER - AGB | 1 | |
| 956A6288 | DRIVE SPLINE ADAPTER - AGB | 1 | |
| 956A6674 | SLIDE HAMMER & ADAPTER - TGB TRANSFERT SHAFT | 2 | |
| 956A6674G02 | SLIDE HAMMER AND ADAPTER TGB TRANSFER SHAFT | 5 | |
| 956A7314G02 | LIFTING BRACKET SET/ ADAPTER PLATE | 3 | |
| 956A7314G04 | LIFTING BRACKET SET/ ADAPTER PLATE | 9 | |
| 956A7644P56 | R/H ADAPTER LOCK NUT | 1 | |
| 956A7651G02 | KIT, SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLYSLIDE HAMMER AND ADAPTER TOOL (LEAP) | 4 | |
| 956A8018G02 | PLATE ADAPTER KIT | 3 | |
| 956A8674G03 | Oil drain adapter for CFM LEAP /1/2 | 2 | |
| 95SDSCC-D-0007 | RESTRAINING FIXTURE WITH ADAPTER AND PINS | 1 | |
| 95SPL-12757-D-006-5(A) -006-6(B) | SUPPORT FIXTURE ADAPTERS AND PINS, UPPER ADAPTER AND LOWER ADAPTER | 1 | |
| 960007011 | MLG AXLE ADAPTER A330 | 1 | |
| 968.85.81.231 | JACK ADAPTER (FOR MAIN JACKS) | 1 | |
| 968.85.81.232 | JACK ADAPTER (FOR TAIL JACKS) | 1 | |
| 968.85.81.243 | JACK PAD ADAPTER WING | 1 | |
| 968.85.81.244 | JACK PAD ADAPTER TAILS | 1 | |
| 9700-1085 | ADAPTER ASSEMBLY AND TEST TOOL (3IT) | 1 | |
| 976140 | DIAL GAUGE ADAPTER ASSY | 1 | |
| 97A28002534 | VAPOR VENT SEAL ADAPTER TOOL | 1 | |
| 97A28002534000 | VAPOR VENT SEAL ADAPTER TOOL | 8 | |
| 97A28002542000 | ADAPTER ADAPTER - D | 9 | |
| 97A76102008000 | TOOL: ADAPTER SPRING SCALE 5100 | 1 | |
| 97L42002004000 | SET OF ADAPTER TOOLS FOR AFDX HARNESSES TES | 1 | |
| 983-4195-140 | SUB-LEVEL ADAPTER ASSEMBLY | 1 | |
| 987-3705-001 | INTERFACE ADAPTER CABLE | 1 | |
| 987-3705-002 | INTERFACE ADAPTER CABLE | 1 | |
| 987-3705-003 | INTERFACE ADAPTER CABLE | 1 | |
| 987-3790-002 | INTERFACE ADAPTER CABLE KIT | 1 | |
| 98A070030907206 | ADAPTER JACK // ADAPTER TO SUIT WING JACK PN:HS1009KD | 1 | |
| 98A07003906200 | LOAD CELL ADAPTER - | 15 | |
| 98A07003907200 | ADAPTER ADAPTER FOR LOADCELL | 15 | |
| 98A07003907203 | ADAPTER ADAPTER FOR LOADCELL | 1 | |
| 98A07003910202 | ADAPTER ADAPTER ROUND BAR | 1 | |
| 98A07004002000 | Jacking adapter socket（rib 8 jacking point） | 9 | |
| 98A27309005000 | WRENCH ADAPTER FOR OVERPRESSURE DEVICE | 1 | |
| 98A28007570000 | ADAPTER ADAPTER - VENT AND DRAIN VALVE, | 37 | |
| 98A28104005000 | BLANK ADAPTER ASSEMBLY | 1 | |
| 98A28104007000 | BLANK ADAPTER ASSEMBLY | 1 | |
| 98A28104011000 | BLANK ADAPTER ASSEMBLY | 1 | |
| 98A28104014000 | BLANK ADAPTER ASSEMBLY | 1 | |
| 98A28104017000 | BLANK ADAPTER ASSEMBLY | 2 | |
| 98A32001001200 | TOOL: ADAPTER LANDING GEAR 5100 | 3 | |
| 98A35207599000 | HOSE ADAPTER ALTITUDE SWITCH O2 MASK | 25 | |
| 98AMS172322005 | Wrench Adapter Nut MS172322 | 9 | |
| 98AMS172323 | HOOK WRENCH ADAPTER MS172323 NUTS (BER) | 1 | |
| 98AMS172323002 | HOOK WRENCH ADAPTER MS172323 NUTS (BER) | 9 | |
| 98AMS172329 | HOOK WRENCH ADAPTER MS172329 NUTS | 1 | |
| 98AMS172329002 | HOOK WRENCH ADAPTER MS172329 NUTS | 9 | |
| 98AMS172333 | HOOK WRENCH ADAPTER MS172333 NUTS | 1 | |
| 98AMS172333002 | HOOK WRENCH ADAPTER MS172333 NUTS | 13 | |
| 98AMS172335A1 | WRENCH ADAPTER FOR | 1 | |
| 98AMS172339002 | HOOK WRENCH ADAPTER MS172339 | 3 | |
| 98AMS172343002 | HOOK WRENCH ADAPTER MS172343 | 2 | |
| 98AMS172344 | HOOK WRENCH ADAPTER MS172344 NUTS | 1 | |
| 98AMS172344002 | HOOK WRENCH ADAPTER MS172344 NUTS | 9 | |
| 98D07103500000 | JACK ADAPTER FUSELAGE | 32 | |
| 98D07104000001 | JACKING ADAPTER LH | 24 | |
| 98D07104000100 | JACKING ADAPTER LH | 5 | |
| 98D07104000101 | JACKING ADAPTER RH | 3 | |
| 98D07104081-100 | JACKING ADAPTER RH | 1 | |
| 98D07104081-101 | JACKING ADAPTER LH | 1 | |
| 98D07104081000 | JACKING ADAPTER LH | 26 | |
| 98D07203015000 | JACK ADAPTER - PYLON | 5 | |
| 98D10103500043 | STATIC PORT ADAPTER COVER | 13 | |
| 98D27504035000 | TORQUE ADAPTER TRUNNION NUT | 20 | |
| 98D28104000000 | PIPE ADAPTER WATER DRAIN | 23 | |
| 98D28108293000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK; ADAPTER WATERDRAIN A319 | 21 | |
| 98D28108293002 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK; ADAPTER WATERDRAIN A319 | 12 | |
| 98D28108560000 | WATER DRAIN ADAPTER - TUBE | 7 | |
| 98D28108561000 | EXTRACTOR ADAPTER TUBE WATER DRAIN | 13 | |
| 98D28108561040 | EXTR. ADAPTER TUBE DRAIN VALVE | 1 | |
| 98D2810856200 | Pressure test drain adapter act | 1 | |
| 98D28108562000 | PRESSURE TEST DRAIN ADAPTER ACT | 12 | |
| 98D28108647040 | CHECK VALVE HOSE ADAPTER A318, A319, A321 | 1 | |
| 98D28108647042 | DRAINAGE ADAPTER ASSEMBLY | 1 | |
| 98D28108647048 | CHECK VALVE HOSE ADAPTER A320 | 1 | |
| 98D29003502009 | ITEM 9 ADAPTER - TMHDI1611 | 1 | |
| 98D32403003000 | DRIVING ADAPTER FOR TACHO | 19 | |
| 98D32403003000 | DRIVING ADAPTER | 19 | |
| 98D32403004000 | DRIVING ADAPTER WITH FANS | 20 | |
| 98D32403004000 | DRIVING ADAPTER | 20 | |
| 98D32403005001 | CH / ADAPTER BRAKE UNIT NUT | 24 | |
| 98D34003500000 | Static pressure port adapter cover | 31 | |
| 98D34003500103 | STATIC PORT ADAPTER COVER A320 | 9 | |
| 98D34103002000 | COM-1926 A320 ADAPTER FLUSHING AIR DATA SYSTEM | 32 | |
| 98D34103004001 | PITOT/STATIC CLEANING ADAPTER KIT | 31 | |
| 98D34103007000 | STATIC PORT ADAPTER (VARIATION, POSSIBLY FOR STANDBY PORTS) | 10 | |
| 98D38108001000 | Connector ADAPTER GAIN ARINC | 5 | |
| 98D38108002000 | ADAPTER ADAPTER DRAIN MAST | 9 | |
| 98D47209001222 | Manometer adapter cap | 1 | |
| 98D71203022000 | ADAPTER ADAPTER TROLLEY RI IDG | 12 | |
| 98D71203022001 | ADAPTER ADAPTER TROLLEY RI IDG | 5 | |
| 98DS07003000001 | JACK ADAPTER WING | 1 | |
| 98F07103500001 | JACK ADAPTER FUSELAGE | 20 | |
| 98F07104000002 | TOOL, ADAPTER SET, WING JACK, A330, | 15 | |
| 98F07107501000 | JACK ADAPTER FUSELAGE | 17 | |
| 98F07203000308 | SHORING ADAPTER COMP | 1 | |
| 98F12108458000 | Filling adapter flap input gearbox | 8 | |
| 98F27508121000 | WRENCH ADAPTER TRUNNION | 1 | |
| 98F27508278001 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
| 98F27508278002 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 4 | |
| 98F27508278003 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
| 98F27508278004 | ADPATER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
| 98F27508726000 | WRENCH ADAPTER TRUNNION | 1 | |
| 98F27508726001 | WRENCH ADAPTER TRUNNION | 1 | |
| 98F34103000000 | ADAPTER ADAPTER COVER-STATIC PROBE | 17 | |
| 98F34103001000 | PITOT ADAPTER (ARB) | 16 | |
| 98F49208240000 | ADAPTER ADAPTER -0 TORQUE | 10 | |
| 98F49208240001 | ADAPTER ADAPTER -0 TORQUE (SQUARE DRIVE) | 12 | |
| 98F54003008001 | ADAPTER ADAPTER -0 DYNAMOMETRIC AT RIB 1 | 1 | |
| 98F54003008002 | ADAPTER ADAPTER -0 DYNAMOMETRIC AT RIB 1 | 2 | |
| 98F71201001110 | ADAPTER ADAPTER (RR) FWD ASSY | 7 | |
| 98F71203001200 | ADAPTER GSE ADAPTER GE AFT | 1 | |
| 98F71203001202 | GSE adapter "RRT700" FWD | 2 | |
| 98F71203001206 | GSE adapter "RRT700" AR | 1 | |
| 98L07008510000 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510001 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 4 | |
| 98L07008510202 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510204 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510206 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07008510208 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | 1 | |
| 98L07209001000 | ADAPTER ADAPTER - SHORING THS | 2 | |
| 98L27309008000 | SUPPORT ADAPTER KIT-EHA OR SERVOCONTROL | 4 | |
| 98L27503000002 | ADAPTER ADAPTER FLAP PCU | 1 | |
| 98L28004033000 | ADAPTER ADAPTER ASSY-BLD/INFL | 1 | |
| 98L29203001001 | ADAPTER ADAPTER - FWD LEGHS | 1 | |
| 98L29203002001 | ADAPTER ADAPTER - AFT - LEGHS | 1 | |
| 98S 610 0 0007 000 | TORQUE ADAPTER PROPELLER | 9 | |
| 98S07003000001 | JACK ADAPTER WING/ TAIL | 16 | |
| 98S07008010000 | FUSELAGE JACK ADAPTER | 19 | |
| 98S07008010001 | FWD FUSELAGE JACK ADAPTER (X2) | 1 | |
| 98S27003002000 | MANUAL DRIVE ADAPTER (TRIM ACUATOR) | 10 | |
| 98S28005002000 | FCU ADAPTER CABLE | 2 | |
| 98S34405000000 | T2CAS Adapter Cable | 3 | |
| 98S34405000000-REVA | T2CAS ADAPTER CABLE | 1 | |
| 98S45105000000 | PMAT 2000 Adapter Cable | 2 | |
| 98S45105001000 | PDL Sagem Adapter Cable | 1 | |
| 98S52008501201 | FORE ADAPTER PASSENGER CARGO DOOR R | 2 | |
| 98S57003030000 | LOAD RELIEF ADAPTER PATIN À LA N 13 | 5 | |
| 98S61005002000 | TORQUE ADAPTER PROP TO GEARBOX | 6 | |
| 98S61005002000. | TORQUE ADAPTER PROPELLER | 6 | |
| 98S7008010000 | ATR / ADAPTER JACK | 1 | |
| 98S7008010001 | ATR / ADAPTER JACK | 1 | |
| 98S71005000000 | Q.E.C FOR TURNING ADAPTER NUTS | 12 | |
| 98S71205001000 | TORQUE FOR ALTERNATOR ADAPTER ( BASE) | 5 | |
| 98S71205002200 | TORQUE WRENCH ADAPTER 1/2" | 3 | |
| 98V07109001000 | ADAPTER # ADAPTER - AFT JACKING | 6 | |
| 98V07109001001 | JACKING ADAPTER - AFT JACKING | 2 | |
| 98V28003001000 | ADAPTER ADAPTER TEST TOOL | 2 | |
| 99-2645 | NOSE ADAPTER - HUCK | 8 | |
| 99-791-511 | CABLE ADAPTER ASSEMBLY | 2 | |
| 99-791-563 | ANTI-SKID ADAPTER CABLE (560-0260 THRU 0538) | 1 | |
| 990-00-00-833 | FUEL QTY ADAPTER CABLE | 1 | |
| 99127-231 | BLEED ADAPTER KIT (V2500. CFM56) | 2 | |
| 99127-281 | BLEED ADAPTER KIT (LEAP-1 A) | 2 | |
| 995050 | FACE SEAL ADAPTER (FSA) | 1 | |
| 997-71-572 | ANTI-SKID ADAPTER CABLE (560-00539 THRU 5000) | 1 | |
| 9970-957-145 | FLANGE, ADAPTER - LUBRICATION UNIT | 1 | |
| 9970-957-148 | KIT ADAPTER OIL TANK TESTING | 1 | |
| 9970-957-195 | FLANGE, ADAPTER - LUBRICATION UNIT | 1 | |
| 9970-957-526 | TOOL SET, LEAK TEST, ADAPTER TEST | 1 | |
| 99A34101006100 | COVER ADAPTER BLANKING CHARGING STATIC PORT | 1 | |
| 99A34103002000 | Cover Adapter Blank/Charg Static Port | 8 | |
| 9C1168G05 | GUIDE ADAPTER - TURBINE CENTER FRAME, VERTICAL (TCF GUIDE ADAPTER) | 1 | |
| 9C1204G01 | ADAPTER JACKSTAND - IDG USE TOGETHER WITH JACK ADAPTER IDG - A24011-1 ON 9C1132G05 - JACK STAND | 8 | |
| 9C1204G01 | ADAPTER - JACK STAND, IDG/VSCF | 8 | |
| 9C1570G01 | Handling adapter front or rear balancing | 1 | |
| 9C1700G02 | WRENCH - ADAPTER BHGE 9C1700G02 SPECIAL TOOL FOR VARIBLE STATOR VINE VALVE (VSV) ACTUATOR COMPONENTS REPLACEMENT AND IGV, VSV INSPECTION | 3 | |
| 9C1758G01 | Rear rotating adapter on cdp seal | 1 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | 1 | |
| 9C2262 | HANDLING ADAPTER HPC ROTOR | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| 9PTK | MD80/MD90/DC-9 PITOT STATIC ADAPTER KIT | 1 | |
| A-51300 | TOOL-PUMP END ADAPTER TO INFLATE/DEFLATE VALVE | 1 | |
| A-77.02.1 | ROTATING PROBE ADAPTER (CONNECTOR OF 4 PIN FISHER - 1 END MALE, 1 END FEMALE) | 1 | |
| A0110284 | DRIVE BLOCKS ADAPTER EXTRACTOR | 1 | |
| A0125888 | TEST EQUIPMENT ADAPTER TO TEST COMPLETE BRAKE UNIT | 1 | |
| A0267-00-000 | IRON - STEEL ADAPTER TORQUE MACHINE AIR CONDING AERO | 1 | |
| A034017-24 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK AND FLUSHING | 1 | |
| A07001 | JACK ADAPTER FWD BODY | 1 | |
| A07001-11 | Jack Adapter - Forward Body | 16 | |
| A07001-11 | ACK ADAPTER - FORWARD BODY | 16 | |
| A07003 | JACK ADAPTER OUTBOARD WING | 1 | |
| A07003-1 | JACK ADAPTER - OUTBOARD WING | 14 | |
| A07005-1 | HOIST ADAPTER - AIRPLANE RECOVERY | 1 | |
| A07005-2 | HOIST ADAPTER - AIRPLANE RECOVERY | 1 | |
| A12005 | LUBRICATION ADAPTER ATTACH FITTING WING/NACELLE | 1 | |
| A12005-1 | LUBRICATION ADAPTER - ATTACH FITTING, WING/NACELLE | 12 | |
| A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 12 | |
| A120F-FWD-GREEN | OPTICAL ADAPTER OLYMPUS FWD VIEW | 1 | |
| A120F-SIDE-GREEN | OPTICAL ADAPTER OLYMPUS SIDE VIEW | 1 | |
| A120N-SIDE-RED | OPTICAL ADAPTER OLYMPUS SIDE VIEW | 1 | |
| A1461 | RF ADAPTER (N(F) TO N(F)) | 1 | |
| A1631 | RF ADAPTER (SMA(F) TO SMA(F)) | 1 | |
| A17013-32 | HOIST ADAPTER IDG | 1 | |
| A200D070 | TEST ADAPTER CABLE | 1 | |
| A21001 | HOIST ADAPTER AIR CONDITIONING | 1 | |
| A21001-1 | HOIST ADAPTER - A/C PACK | 1 | |
| A21001-34 | HOIST ADAPTER AIR CON PACK | 1 | |
| A21001-44 | HOIST ADAPTER EQPT | 14 | |
| A21001-45 | Hoist Adapter - Air Conditioning Pack | 11 | |
| A21003-1 | TUBING TEST ADAPTER - P/N A21003-1 | 1 | |
| A21010-203 | VACUUM TANK-PRESSURE RELIEF VALVE TESTER ADAPTER ASSY | 12 | |
| A21013-1 | HOIST ADAPTER EQPT | 1 | |
| A21013-50 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 2 | |
| A21013-50-M | HOIST ADAPTER EQPT- | 1 | |
| A23001-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| A24008-27 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 3 | |
| A24008-37 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 11 | |
| A24011-1 | HOIST ADAPTER ASSEMBLY - INTEGRATED DRIVE GENERATOR | 13 | |
| A240111 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 13 | |
| A26002-97 | ADAPTER CABLE ASSEMBLY | 3 | |
| A27004 | HOIST ADAPTER L.E. SLAT DRIVE | 1 | |
| A27004-1 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE | 3 | |
| A27004-2 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE | 4 | |
| A27021-69 | LOCK - ADAPTER EQUIPMENT, CONTROL WHEELS - 757 | 13 | |
| A27021-96 | B767 COLUMN ADAPTER EQUIPMENT TOOL | 9 | |
| A27021-98 | ADAPTER - ADAPTER EQUIPMENT, CONTROL WHEELS | 13 | |
| A27035-1 | Screwdriver - Adapter Rudder/Elevator Feel Actuator Cylinder | 3 | |
| A27062-10 | Drive Adapter Assy | 1 | |
| A27062-14 | Spanner Adapter Assembly | 2 | |
| A27062-2 | Spline Adapter | 1 | |
| A27062-3 | Test Adapter Assembly | 1 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A27077-1 | B767 SLAT DRIVE ADAPTER TOOL | 6 | |
| A27092-110 | HOIST ADAPTER ASSEMBLY | 6 | |
| A27117-1 | SPLINE ADAPTER (A27117-4 INCLUDED IN A27117-1 TEST EQPT) | 7 | |
| A28003-34 | Tank adapter assy | 5 | |
| A28005-24 | 767 ADAPTER ASSY | 11 | |
| A28005-43 | 777 Adapter Assy | 2 | |
| A28005-48 | 737 Adapter Assy | 22 | |
| A28005-53 | B757 Adapter Assy | 6 | |
| A28005-56 | 787 ADAPTER ASSY | 1 | |
| A28005-81 | 777 ADAPTER ASSY | 7 | |
| A28005-82 | ASSEMBLY - ADAPTER , APU FUEL LINE SHROUD | 10 | |
| A28005-83 | 757 ADAPTER ASSY | 8 | |
| A28014-1 | PHASE CHECKING EQPT - PUMP, GROUND FAULT INTERRUPTER (USE BREAKOUT BOX A28014-2 AND ADAPTER CABLE ASSY A28014-3 WHICH ARE THE SUB-END ITEMS OF A28014-1) | 7 | |
| A28017-1 | FUEL QTY ADAPTER HARNESS | 1 | |
| A29001 | HOIST ADAPTER AIR DRIVEN HYDRAULIC PUMP | 1 | |
| A29001-1 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 6 | |
| A29001-19 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 3 | |
| A29001-20 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 2 | |
| A3-06-3474 | BATTERY CURRENT MEASUREMENT ADAPTER BATTERY TO MAIN PCB INTERFACE BREAKOUT CABLE | 1 | |
| A31007-1 | CABLE - ADAPTER (USE WITH TELEDYNE FDAU/DFDR TESTER P/N 2222786) | 2 | |
| A31007-59 | DFDR ADAPTER CABLE | 17 | |
| A31007-60 | CABLE ADAPTER TELEDYNE TESTER | 2 | |
| A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 20 | |
| A32001-1 | WRENCH ADAPTER GLAND NUT MLG B767-200/300 | 1 | |
| A32004 | WRENCH ADAPTER GLAND NUT MLG | 1 | |
| A32004-1 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 13 | |
| A32004-4 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 1 | |
| A32004-5 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 2 | |
| A32004-5-M | WRENCH ADAPTER EQPT | 1 | |
| A32012-13 | WRENCH ADAPTER WHEEL AXLE NUT-MLG | 26 | |
| A32013-1 | HOIST ADAPTER NLG | 7 | |
| A32020 | HOIST ADAPTER – DRAG STRUT, NLG | 1 | |
| A32020-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 14 | |
| A32020-8 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 2 | |
| A32021 | WRENCH ADAPTER GLAND NUT NLG | 1 | |
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| A32025-1 | WRENCH ADAPTER - WHEEL RETAINING AXLE NUT, NOSE LANDING GEAR | 20 | |
| A32032-25 | B767 JACK ADAPTER TOOL | 1 | |
| A32034 | WRENCH ADAPTER STEERING NUT NLG | 1 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 9 | |
| A32041-1 | TORQUE ADAPTER - CYLINDER, NOSE LANDING GEAR (NLG) RETRACT ACTUATOR | 2 | |
| A32045-108 | SPL-5353 ADAPTER - WRENCH | 9 | |
| A32067-14 | END/MID ADAPTER PLATE | 1 | |
| A32069 | WRENCH ADAPTER RETAINER NUT ANTI SKID TRANSDUCER | 1 | |
| A32069-1 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 1 | |
| A32069-7 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 20 | |
| A32070 | TORQUE ADAPTER SNUBBER NUT | 1 | |
| A32070-1 | TORQUE ADAPTER - SNUBBER NUT | 1 | |
| A32075-10 | SPL-1831 ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM | 22 | |
| A32075-9 | SPL-1831 ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM | 4 | |
| A32078-1 | KIT ADAPTER DRAG BRA | 1 | |
| A32101 | WRENCH ADAPTER AXLE NUT NLG | 1 | |
| A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
| A32101-1-M | WRENCH ADAPTER END | 1 | |
| A32101-2 | WRENCH ADAPTER NUT-NLG- | 8 | |
| A32120-1 | TORQUE ADAPTER SET - ACTUATOR COMPONENTS, MAIN LANDING GEAR (MLG) | 1 | |
| A3260 | RF ADAPTER (BNC(M) TO SMA(F) | 1 | |
| A330-92440-0001 | AIR INLET, TEST ADAPTER | 1 | |
| A34011-119 | CABLE ADAPTER - ASCTU (FOR 767 AIRPLANES WITH ASCTU) | 1 | |
| A34011-165 | CABLE ADAPTER - ASCTU (FOR 767 AIRPLANES WITH ASCTU) | 1 | |
| A34017-1 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 5 | |
| A34017-24 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 10 | |
| A34017-35 | Test adapter kit-pitot static continuity leak and flushing | 3 | |
| A34017-36 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 6 | |
| A34018-1 | Test adapter kit-pitot static alt continuity leak and flushing | 1 | |
| A34018-2 | Test adapter kit-pitot static alt continuity leak and flushing | 1 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A36021 | BITE MODULE ADAPTER CABLE - AIR SUPPLY SYSTEM | 1 | |
| A36021-1 | CABLE ADAPTER EQPT | 3 | |
| A38012-55 | Pipe Adapter Fitting | 1 | |
| A38012-75 | Pipe Adapter Fitting | 1 | |
| A3913 | RF ADAPTER (N(M) TO SMA(F) | 1 | |
| A4162 | RF ADAPTER (SMA(F) TO SMB JACK | 1 | |
| A51300 | TOOL-PUMP END ADAPTER TO INFLATE/DEFLATE VALVE | 1 | |
| A51S29062-3 | DECK ADGE PWR ADAPTER TRIMMING | 1 | |
| A54003-1 | SLING ADAPTER STRUT | 5 | |
| A663159 | VENT PLUG ADAPTER 3/8 UNF | 1 | |
| A70/70 | STEREO ADAPTER OLYMPUS SIDE VIEW | 1 | |
| A70013-19 | HOIST ADAPTER IDG B757 | 1 | |
| A71002-20 | AFT ADAPTER ASSY | 1 | |
| A71003-11 | Aft Adapter Assy | 1 | |
| A71003-2 | FWD ADAPTER ASSY | 1 | |
| A71003-28 | Aft adapter assy | 1 | |
| A71003-42 | AFT ADAPTER ASSY | 3 | |
| A71003-43 | AFT ADAPTER WLDMT | 1 | |
| A71003-44 | AFT ADAPTER WLDMT | 2 | |
| A71003-55 | FWD ADAPTER ASSY | 1 | |
| A71005-34 | FWD ADAPTER ASSY | 4 | |
| A71011-238 | Torque Adapter Assembly | 6 | |
| A71011-331 | WRENCH-TORQUE ADAPTER HEAD | 9 | |
| A71011–238 | TORQUE ADAPTER ASSEMBLY | 6 | |
| A71013 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| A71013 REV F | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| A71013-19 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 6 | |
| A71013-32 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
| A71013-40 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
| A71013-45 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
| A71013-55 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
| A71013-82 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 8 | |
| A71013-88 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| A71049-1 | PT2 Probe Adapter Pw4000 | 13 | |
| A73458D | AIR ADAPTER KIT (1/4") | 1 | |
| A767829 | RECHARGEABLE LED FLOODLIGHT IF8R CONSTRUCTION LED SPOTLIGHT, RECHARGEABLE LED SPOTLIGHT, 900W 9000LM, 6 LIGHTING MODES, BRIGHT 5V 2.1A USB PORT AND SOS MODE, 3 IN 1 USB CABLE, CAR ADAPTER AND CHARGER, 11 / 58H | 1 | |
| A90/90 | STEREO ADAPTER OLYMPUS FWD VIEW | 1 | |
| AATK-025 | PMAT 2000 RJ45 ADAPTER KIT BREAKOUT, CIS-MS/FSM BOOT-LOADER | 1 | |
| AB-B999-30SE-1 | FUEL FILTER ADAPTER FIXTURE (BOWL) COM-2589 | 2 | |
| AB07001-DY4 | JACKING ADAPTER FWD BODY | 1 | |
| AB07001-Y5L | JACKING ADAPTER LH | 1 | |
| AB07001-Y5M | JACKING ADAPTER RH | 1 | |
| AB07004-R3E | JACKING ADAPTER FWD BODY | 1 | |
| AB28001-G7T | CHECK VALVE HOSE ADAPTER A320 | 1 | |
| AB28001-G7W | CHECK VALVE HOSE ADAPTER A318, A319, A321 | 1 | |
| ABB999-30SE-1 | FUEL FILTER ADAPTER FIXTURE (BOWL) COM-2589 | 2 | |
| AC-CAR-CHARGER | AC-CAR-CHARGER;Car Adapter for OneExpert DSL | 1 | |
| AC103 | AC103;Detector Adapter SC | 1 | |
| AC114 | AC114;Detector Adapter Mu | 1 | |
| ACK-2 | LUBRICATION ADAPTER KIT (13PC) | 18 | |
| ACN16-TF6 | 16-PIN LEMO TO TRIAX FISCHER ADAPTER CABLE | 1 | |
| AD-10831 | AD-10831;WECO 358 TO BNC ADAPTER CABLE | 1 | |
| AD-21160005 | AD-21160005;Conn Coax SMA Single Adapter SMA Male to BNC Female - Pi Gold Pass-Thru | 1 | |
| AD-953-7 | pitot static probe adapter set | 15 | |
| AD-SC-SC-OM4-SXF-FS | COM-15047 ADAPTER - SNAP ON CONNECTOR, SC | 1 | |
| AD422-6 | PITOT-STATIC TEST SET ADAPTER KIT | 1 | |
| AD600-12 | Pitot Static Adapter Kit for Bombardier CL-600 | 1 | |
| AD953-7 | PITOT-STATIC ADAPTER KIT | 15 | |
| AD967-47 | PITOT STATIC ADAPTER KIT | 1 | |
| AD967-47M | Pitot Static Accessory Adapter Kit for Boeing 747-400 | 3 | |
| ADA120-612 | STATIC-DYNAMIC PRESSURE TEST ADAPTER FOR EMB-120 | 2 | |
| ADA130J-723 | PITOT STATIC, ADAPTER KI ADA130J-723 NAV | 1 | |
| ADA139-612 | PITOT STATIC ADAPTER KIT, | 5 | |
| ADA16-612 | AIRCRAFT MAINTENANCE ADAPTER SET | 1 | |
| ADA30H-612 | PITOT-STATIC TEST SET ADAPTER KIT | 1 | |
| ADA320-845 | ADTS505 AIR DATA TEST ADAPTER KIT | 8 | |
| ADA320-945 | KIT, ADAPTER USE WITH DPS350 | 6 | |
| ADA330-340-946 | Pitot/Static Adapter kit | 5 | |
| ADA60-945 | RVSM Air Data / Pitot Static Adapter Kit for Learjet 35, 50 and 60 | 4 | |
| ADA737-678 | COM-1916 ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT, PN ADA737-678) 737-600, -700, -800 | 13 | |
| ADA757-612 | AIR DATA ADAPTER KIT FOR B757 | 8 | |
| ADA767HT-612 | AIR DATA ADAPTER KIT | 5 | |
| ADAE3-612 | PITOT – STATIC ADAPTER KIT | 1 | |
| ADAG24-945 | Gulfstream Pitot Static Adapter Kit - Gulfstream 2/3/4/400/450 | 2 | |
| ADAG5-834HT | PITOT / STATIC PROBE ADAPTER AND HOSE KIT | 5 | |
| ADGE95-612 | ADTS ADAPTER KIT | 7 | |
| ADN14 | RIVNUT KIT DRILL ADAPTER BRAND: ASTRO PNEUMATIC | 1 | |
| ADP-00353 | Torque Adapter Relief Valve Plu | 1 | |
| ADP161121RTC-4 | PITOT ADAPTER 1P | 1 | |
| ADTS405-1891-30-MO | POWER ADAPTER CABLE | 1 | |
| AE89903E | HYDRAULIC QUICK DISCONNECT ADAPTER - FILL QD | 4 | |
| AE89903H | HYDRAULIC QUICK DISCONNECT ADAPTER - RETURN QD | 3 | |
| AE96993E | HYD ADAPTER VALVE | 9 | |
| AED70US24 | CHARGING ADAPTER FOR PMAT2000 | 2 | |
| AERO 05-001 | SCHRADER VALVE INFLATOR ADAPTER (GOOSE NECK) | 1 | |
| AFLX-6 | TRANSDUCER ADAPTER (6 INCH (152 MM) | 1 | |
| AG14107 | WRENCH TORQUE ADAPTER (2 IT) | 1 | |
| AGE 02302-401 | ETHERNET ADAPTER RJ45 | 1 | |
| AGE 04510-401 | JACKING ADAPTER SET | 3 | |
| AGE-00017-401 | MAIN GEAR JACK ADAPTER (GSE 002) EMB-120 | 1 | |
| AGE-00065-403 | GSE 102 ADAPTER - HOISTING, NOSE LANDING GEAR | 6 | |
| AGE-00483-001 | WHEEL SPEED TRANSDUCER ADAPTER GSE 101 EMB-120 | 10 | |
| AGE-00599-401 | GSE 105 ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
| AGE-01421-401 | KIT - JACKING ADAPTER GSE 026 | 1 | |
| AGE-01468-401 | JACKING ADAPTER KIT FOR ERJ | 2 | |
| AGE-01524-401 | GSE 198 ADAPTER - CABIN PRESSURIZATION TEST | 2 | |
| AGE-03249-403 | SEAT ADAPTER RIGGING FLAP L/H | 3 | |
| AGE-03328-401 | GSE 150 ADAPTER - LIFTING ENG AIR INTAKE | 2 | |
| AGE-04363-401 | JACKING ADAPTER KIT | 9 | |
| AGE-04364-405 | JACK PAD ADAPTER SET | 1 | |
| AGE-04540-401 | FUEL TANK LEAKAGE ADAPTER B | 1 | |
| AGE-04713-401 | CABIN PRESSURE TEST ADAPTER - EMBRAER | 4 | |
| AGE-04713-401 / GSE-017 | CABIN PRESSURE TEST ADAPTER - EMBRAER | 1 | |
| AGE-04890-401 | JACK PAD ADAPTER SET | 2 | |
| AGE-05367-401 | Embraer - ADAPTER ASSY | 10 | |
| AGE-05367-402 | Embraer - ADAPTER ASSY | 10 | |
| AGE-70069 | ADAPTER APU TRANSPORT | 5 | |
| AGE02302-401 | ETHERNET ADAPTER RJ45 | 1 | |
| AGE04363-401 | KIT JACKING ADAPTER E195 | 9 | |
| AGE05367-402 | ADAPTER RIGHT-HAND, ASSY | 10 | |
| AGE10370-1 | TORQUE ADAPTER WRENCH | 2 | |
| AGE10370-11 | TORQUE ADAPTER WRENCH | 1 | |
| AGE10370-12 | Torque Adapter Wrench | 1 | |
| AGE10370-2 | TORQUE ADAPTER WRENCH | 2 | |
| AGE10370-2/-3 | Torque Adapter Wrench | 1 | |
| AGE10370-3 | TORQUE ADAPTER WRENCH | 2 | |
| AGE10370-4 | TORQUE ADAPTER WRENCH | 1 | |
| AGE10370-6 | TORQUE ADAPTER WRENCH | 2 | |
| AGE10370-7 | TORQUE ADAPTER WRENCH | 2 | |
| AGE10370-8 | TORQUE ADAPTER WRENCH | 1 | |
| AGE10370-9 | TORQUE ADAPTER WRENCH | 1 | |
| AGE11412 | Generator Adapter Kit | 1 | |
| AGE11418 | 777 FLUSH RIG ADAPTER KIT | 1 | |
| AGE11706A | IDG Adapter Kit | 1 | |
| AGE11707 | Flush Adapter Kit | 2 | |
| AGE11708 | GOV'T ASSY ADAPTER KIT, FLUSHING KIT | 2 | |
| AGE13162 | IDG ADAPTER KIT | 1 | |
| AGE13195 | FLUSH ADAPTER SET | 1 | |
| AGE13212 | FLUSH ADAPTER SET NOZZLES | 1 | |
| AGE13213 | FLUSH ADAPTER SET | 1 | |
| AGE13483 | IDG ADAPTER KIT | 1 | |
| AGE13487 | Spline Adapter (Part of AGE13483 and AGE13488) | 1 | |
| AGE13488 | IDG ADAPTER KIT | 1 | |
| AGE14060 | TORQUE WRENCH ADAPTER ASSEMBLY | 2 | |
| AGE14086 | Torque Adapter Wrench | 2 | |
| AGE14093 | Torque Adapter Wrench | 1 | |
| AGE14555 | TORQUE ADAPTER WRENCH | 1 | |
| AGE17077B | RAT ADAPTER HOSE TOOL | 5 | |
| AGE70018 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER (25 FT CABLE RS485 TO RS232) | 6 | |
| AGE70216 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER (25 FT CABLE RS485 TO RS232) | 9 | |
| AGE70741 | Fuel Adapter Fitting | 1 | |
| AGSE-E10806-P01 | LH ENGINE CRADLE ADAPTER FOR 9C6025P02 | 1 | |
| AGSE-E10806-P02 | КH ENGINE CRADLE ADAPTER FOR 9C6025P02 | 1 | |
| AGSE-E27107-P01 | FWD BOOTSTRAP ADAPTER | 1 | |
| AGSE-E27209-S01 | AFT MOUNT/SHIPPING ADAPTER | 1 | |
| AHC21FD | 1/4 NPT F ADAPTER IND TYPE | 1 | |
| AHC21FE | 1/4 NPT F ADAPTER IND TYPE | 1 | |
| AHC21MD | 1/4 NPT M ADAPTER IND TYPE | 1 | |
| AHC21ME | 1/4 NPT M ADAPTER IND TYPE | 1 | |
| AHC21PK | COUPLER F ADAPTER M IND TYPE | 1 | |
| AHC22FD | 1/4 NPT F ADAPTER 3/8 IND TYPE | 1 | |
| AHC22FE | 1/4 NPT F ADAPTER 3/8 IND TYPE | 1 | |
| AHC22MD | 1/4 NPT M ADAPTER 3/8 IND TYPE | 1 | |
| AHC22ME | 1/4 NPT M ADAPTER 3/8 IND TYPE | 1 | |
| AHC23FD | 1/4 NPT F ADAPTER ARO TYPE | 1 | |
| AHC23FE | 1/4 NPT F ADAPTER ARO TYPE | 1 | |
| AHC23MD | 1/4 NPT M ADAPTER ARO TYPE | 1 | |
| AHC23ME | 1/4 NPT M ADAPTER ARO TYPE | 1 | |
| AHC24FD | 1/4 NPT F ADAPTER AUTO TYPE | 1 | |
| AHC24FE | 1/4 NPT F ADAPTER AUTO TYPE | 1 | |
| AHC24MD | 1/4 NPT M ADAPTER AUTO TYPE | 1 | |
| AHC24ME | 1/4 NPT M ADAPTER AUTO TYPE | 1 | |
| AHC25FD | 3/8 NPT F ADAPTER AUTO TYPE | 1 | |
| AHC25MD | 3/8 NPT M ADAPTER AUTO TYPE | 1 | |
| AHC26FD | 1/4 NPT F ADAPTER LINCOLN TYPE | 1 | |
| AHC26MD | 1/4 NPT M ADAPTER LINCOLN TYPE | 1 | |
| AHC27FD | 1/2 NPT F ADAPTER IND TYPE | 1 | |
| AHC27MD | 1/2 NPT M ADAPTER IND TYPE | 1 | |
| AHC28FD | 3/8 NPT F ADAPTER IND TYPE | 1 | |
| AHC28MD | 3/8 NPT M ADAPTER IND TYPE | 1 | |
| AHCCPS97F | HI-FLOW SWIVEL ADAPTER FEMALE | 1 | |
| AHCCPS97M | HI-FLOW SWIVEL ADAPTER MALE | 1 | |
| AI-12C | BORESCOPE MOUNT ADAPTER (OLYMPUS) | 1 | |
| AIBMD/J23001-26 | HOIST ADAPTER SATCOM | 1 | |
| AK130H | C-130H PITOT/STATIC ADAPTER KIT | 1 | |
| AK130J-323 | PITOT-STATIC TEST SET ADAPTER KIT | 1 | |
| AK1900 | PITOT STATIC ADAPTER KIT | 1 | |
| AKE190 | COMPLETE ADAPTER KIT E170/175/190/195 | 3 | |
| AKF16 | PITOT STATIC ADAPTER SET | 1 | |
| AKGV-04 | Pitot Static Accessory/ Adapter Kit Gulfstream V / G500 / G55 | 1 | |
| AKGX | PITOT STATIC ADAPTER KIT | 1 | |
| AKMD10 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-10 | 1 | |
| AKMD11 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-11 | 1 | |
| AKP12 | PITOT STATIC BOX ADAPTER KIT | 1 | |
| ALK-114 | HANDLE ADAPTER RIGHT ANGLE 5" | 1 | |
| ALT45200001 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 1 | |
| ALTITUDE SWITCH ADAP | ALTITUDE SWITCH ADAPTER TOOL | 1 | |
| AM-1928-100 | BOOSTRAP ADAPTER FOR CF6-80 | 1 | |
| AM-1928-900 | AFT BOOTSTRAP ADAPTER BEAM | 1 | |
| AM-2106 | UNIVERSAL ENGINE HANDLING SLING, ENGINE ADAPTER KIT | 2 | |
| AM020906/200 | TIRE INFLATION ADAPTER AND PRESSURE GAUGE | 1 | |
| AM2106 | UNIVERSAL ENGINE HANDLING SLING, ENGINE ADAPTER KIT | 2 | |
| AM63537 | TORQUE ADAPTER FOR CYLINDER LINER | 1 | |
| AM63537/A | TORQUE ADAPTER FOR CYLINDER LINER | 1 | |
| AN4 TEE ADAPTER | AN4 MALE FLARE TEE SHAPE - ADAPTER 3-WAYS FITTING | 1 | |
| AN4 UNION ADAPTER | AN4 MALE FLARE STRAIGHT UNION - ADAPTER 2-WAYS FIT | 1 | |
| AN807-4D | O2 ADAPTER -3 OFF TOOL | 3 | |
| AND10089-3PC-1006 | ADAPTER - ADAPTER FOR FILLING WITH OXYGEN STATIONARY | 1 | |
| AO123258 | TORQUE SPANNER ADAPTER 1/2 IN. SQUARE DRIVE | 1 | |
| AP2D-BNC | 12PIN ADAPTER LEMO PLUG TO FEMALE BNC | 1 | |
| AP2D-BNC 12PIN | 12PIN ADAPTER LEMO PLUG TO FEMALE BNC | 1 | |
| APA17887-4-6 | SYSTEM PURGE ADAPTER APA17887-4-6 | 1 | |
| APA97632-3-4-4 | PITOT STATIC ADAPTER KIT | 1 | |
| APA97632M1-3-4-4 | TEST ADAPTER ADSP | 3 | |
| APA97632M1-4-4-4 | SMARTPROBE PRESSURE ADAPTER PART NUMBER:APA97632M1-4-4-4 | 1 | |
| APAF16-723 | PITOT STATIC ADAPTER SET | 1 | |
| APM3900 | TOW ADAPTER (MANUFACTURER JBT LEKTRO) | 1 | |
| APN 803213-S58-2 | VALVE INLET TEST ADAPTER AVOX SYSTEMS (SAFRAN) | 1 | |
| APV7873-00-0 | TORQUE ADAPTER TOOL issA | 1 | |
| APV7873-00-0 REV A | TORQUE ADAPTER TOOL | 1 | |
| APYOR-610-58 | TORQUE ADAPTER 5/8" | 1 | |
| ARINC 615 | DATA LOADER KIT : INCLUDES UA 1431 USB ADAPTER TO ARINC 429 (12R?4T) AND ARINC 717 (2R/2T) | 1 | |
| AS3214-02 | REPAIR ADAPTER SET | 3 | |
| AS405-30-1891M0 | POWER ADAPTER CABLE | 1 | |
| AS4395-06 | IDG ADAPTER COUPLING | 1 | |
| AS5180D04 | O2 ADAPTER -3 OFF TOOL | 3 | |
| AST-2877 | TORQUE ADAPTER (HARTZELL PROPELLER INC.) | 8 | |
| AST4236-8-2 | ACTUATOR ADAPTER ASSEMBLY | 1 | |
| ASTOFAAGM-1 | GM SHORT ADAPTER GRAY | 1 | |
| AT100D/FF | OPTICAL ADAPTER AT 100D/FF-1F8C5 | 1 | |
| AT100D/NF | OPTICAL ADAPTER AT 100D/NF-1F8C5 | 1 | |
| AT100S/FF | OPTICAL ADAPTER AT 100S/FF-1F8C5 | 1 | |
| AT100S/FF-IV94N | AT100S/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDES O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 8 - MM - 1 YEAR WARRANTY | 1 | |
| AT100S/NF | OPTICAL ADAPTER AT 100S/NF-1F8C5 | 1 | |
| AT100S/NF-IV94G | IPLEX TIP ADAPTER 4MM 100 DEGREE | 1 | |
| AT100S/NF-IV94N | TIP ADAPTER OF TOOL IV9000N | 2 | |
| AT120D/FF-IV84 | OPTICAL ADAPTER 120 DF V84 GREEN | 2 | |
| AT120D/FF-IV94G | IPLEX TIP ADAPTER 4MM 120 DEGREE | 1 | |
| AT120D/FF-IV94N | MONO OPTICAL ADAPTER FRONT VIEW 4MM | 1 | |
| AT120D/FF-IV96G | OPTICAL ADAPTER FOR SPECIFIC VISION OF 6.0 MM. MODEL: AT120D/FF-IV96G | 1 | |
| AT120D/FF-IV96N | OLYMPUS IPLEX NX FORWARD VIEW OPTICAL ADAPTER (TECHNICAL NO: N4137800) | 1 | |
| AT120D/NF-IV94G | IPLEX TIP ADAPTER 4MM 120 DEGREE | 1 | |
| AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | 1 | |
| AT120D/NF-IV96N | NEAR TIP ADAPTER OF BSI TOOL IV9000N | 1 | |
| AT120DFF | OPTICAL ADAPTER V86 PN: AT120DFF FOV:120 DEGREE | 1 | |
| AT120S/FF-IV84 | Side Viewing , 120 degree field of view Tip Adapter Depth of field 6 - Infiniy mm | 2 | |
| AT120S/FF-IV86 | OLYMPUS SIDE VIEW OPTICAL ADAPTER (120°) | 1 | |
| AT120S/FF-IV96G | OPTICAL ADAPTER FOR SPECIFIC VISION OF 6.0 MM. MODEL: AT120S/FF-IV96G | 1 | |
| AT120S/FF-IV96N | TIP ADAPTER OF BSI TOOL IV9000N | 1 | |
| AT120S/NF-IV96N | TIP ADAPTER OF BSI TOOL IV9000N | 1 | |
| AT134GA | GOOSENECK-TYPE ADAPTER AND EXTENSION | 1 | |
| AT31799-IAS | Torque adapter wheel speed sensor. | 1 | |
| AT50D/50D-IV84 | Stereo Tip Adapter Depth of field 5 mm - Infinity mm | 2 | |
| AT50D/50D-IV94 | OPTICAL ADAPTER RIGID SLEEVE | 1 | |
| AT50S/50S-IV84 | Stereo Tip Adapter Depth of field 4mm - Infinity mm | 1 | |
| AT5580TK | Torque Adapter | 1 | |
| AT5583TK | Torque Adapter | 1 | |
| AT5661 | PORT ADAPTER WHITAKER CMM 21-58-02 | 1 | |
| AT57495 | TORQUE ADAPTER FOR GLAND NUT | 4 | |
| AT60D/60D-IV96G | IV96G-AT60D/60D IPLEX G SERIES OPTICAL STEREO MEASUREMENT TIP ADAPTER MAJ-2343 | 1 | |
| AT60S/60S | OPTYCAL ADAPTER FOR OLYMPUS IPLEX IV 86 | 1 | |
| AT60S/60S-IV96G | IV96G-AT60S/60S IPLEX G SERIES OPTICAL STEREO MEASUREMENT TIP ADAPTER MAJ-2344 | 1 | |
| AT60S60S-IV86 | plex Tip Adapter (90 degree measuring). | 2 | |
| AT69-35663-1001 | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
| AT69-35663-1001PM | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
| AT80D/FF | OPTYCAL ADAPTER FOR OLYMPUS IPLEX IV 86 | 1 | |
| AT80D/FF-IV94N | OPTICAL TIP ADAPTER AT80D/FF-IV94N IPLEX NX (OLYMPUS CODE:N4148700) | 1 | |
| AT80D/FF-IV96N | OLYMPUS IPLEX NX FORWARD VIEW OPTICAL ADAPTER (TECHNICAL NO: N4149300) | 1 | |
| AT80D/NF | OPTYCAL ADAPTER FOR OLYMPUS IPLEX IV 86 | 1 | |
| AT80S | OPTYCAL ADAPTER FOR OLYMPUS IPLEX IV 86 | 1 | |
| ATE-001 | JACK ADAPTER 6 TN MEGA | 1 | |
| ATI134GA | GOOSENECK-TYPE ADAPTER AND EXTENSION | 2 | |
| ATI331B | ANGLE ADAPTER FOR AIR DRILL | 1 | |
| ATI503A-4 | DRILL ADAPTER THREADED #10-32 | 1 | |
| ATIHSSL1/8 | SHANK ADAPTER DRILL | 1 | |
| ATIHSSL5/32 | SHANK ADAPTER DRILL | 1 | |
| ATISSSL3/32 | SHANK ADAPTER DRILL | 1 | |
| ATS050-P120 | AC ADAPTER FOR IPLEX RX | 1 | |
| AV16B1350-TA | TEST TOOL ADAPTER (2IT) | 1 | |
| AW001WZ102 | HEADSET CABLE ADAPTER | 1 | |
| AZ421 | KODAK PIXPRO DIGITAL CAMERA, Li-Ion Battery 4 GB SD CARD / inside of Camera, USB Battery Charger Data Sync Cable Cord, AC Adapter Power Plug | 1 | |
| AZL02072-R00 | TORQUE ADAPTER FOR BOLTS OF THE SEATS | 1 | |
| B-4-HC-A-40 1 | TUBE ADAPTER (0.250 IN. (6,35 MM)) | 1 | |
| B-4-HC-A-401 | TUBE ADAPTER (0,250 IN.) | 1 | |
| B07001-1 | JACKING ADAPTER FWD FUSELAGE B757 | 1 | |
| B07001-7 | JACKING ADAPTER FWD BODY | 15 | |
| B07002-1 | JACKING ADAPTER - AIRPLANE STABILIZATION | 13 | |
| B12006-1 | Lubrication Adapter Spoiler Outer Hinge Link Assy | 15 | |
| B19285-1 | "TOOL - CHARGING ADAPTER TO CHARGING VALVE (WITH O-RING WHICH CONFORMS TO | 1 | |
| B200004-42 | B20004-42 ADAPTER - ACCESS PANEL, LEVERAGE (SC | 1 | |
| B20002-1 | TORQUE ADAPTER - SOCKET TYPE | 1 | |
| B20004 | LEVERAGE ADAPTER EQUIPMENT - ACCESS PANEL | 1 | |
| B20004-21 | Leverage Adapter Equipment - Access Panel | 16 | |
| B20004-39 | Leverage adapter assy | 1 | |
| B20004-42 | Leverage Adapter Equipment - Access Panel | 12 | |
| B20004‑21 | LEVERAGE ADAPTER EQU | 16 | |
| B20004–42 | LEVERAGE ADAPTER EQPT- | 12 | |
| B21117 | , SCREW (MS24694-S102 OR AN509-416R15 (4 REQD.), BOLT (MS21296-04007, (4 REQD.), BOLT (NAS7703-9 (4 REQD.)), BOLT, (MS21296-04007 (4 REQD.)), BOLT, (AN4-7A (2 REQD.)), SCREW (AN509-416R15 (2 REQD, 2 DRILL MOTORS (1,100 TO 2,000 RPM), SPIN ADAPTER (2571004 | 1 | |
| B27029-1 | TORQUE ADAPTER RUDDER JACK SHAFT | 1 | |
| B27033 | TORQUE ADAPTER -0 AILERON PCU INSTL | 1 | |
| B27033-1 | TORQUE ADAPTER - AILERON POWER CONTROL UNIT INSTALLATION | 8 | |
| B27072-1 | KIT ADAPTER FLAP | 2 | |
| B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | 1 | |
| B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
| B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 7 | |
| B28001-2 | FUEL ADAPTER ASSY | 12 | |
| B28002 | SUMP DRAIN ADAPTER B757 | 1 | |
| B28002-1 | HOSE ADAPTER - SUMP FUEL DRAIN | 21 | |
| B28007-2 | PRESSURE TEST ADAPTER - ENGINE FUEL FEED | 4 | |
| B32004 | HOIST ADAPTER -0 DRAG STRUT, NLG | 1 | |
| B32004-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR (NLG) | 9 | |
| B32008 | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | 1 | |
| B32008 REV B | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | 1 | |
| B32008-1 | HOIST ADAPTER - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 6 | |
| B32010-16 | TORQUE ADAPTER MLG | 8 | |
| B32010-23 | MLG CHANGE ADAPTER B | 11 | |
| B32015 | HOISTING ADAPTER SET -0 MLG COMPONENTS | 1 | |
| B32015-38 | HOISTING ADAPTER SET - MAIN LANDING GEAR COMPONENTS | 8 | |
| B32031-1 | KIT ADAPTER ACT RETR | 2 | |
| B32067 | WRENCH ADAPTER -0 NOSE WHEEL STEERING TILLER | 1 | |
| B32067-1 | WRENCH ADAPTER - NOSE WHEEL STEERING TILLER HANDLE | 4 | |
| B32071-1 | HOIST ADAPTER EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 5 | |
| B362-04180A | TORQUE ADAPTER , USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-0911 | ULB BATTERY, TORQUE ADAPTER (TELEDYNE BENTHOS, ELP-362D BEACONS) | 1 | |
| B47-97-049-101 | SLTA ADAPTER PLATE ASS’Y | 1 | |
| B54019-23 | EQUIP ADAPTER UNLOAD | 6 | |
| B54019-41 | EQUIP ADAPTER UNLOAD | 5 | |
| B71024-37 | INCH DRIVE LONG SOCKET ADAPTER FOR P/N B71024-36 | 1 | |
| B71024-39 | STRAIGHT EXTENSION ADAPTER FOR P/N B71024-36 | 3 | |
| B71035 | FUEL SYSTEM PRESERVATION SUPPLY & DRAINAGE ADAPTER KIT | 1 | |
| B71035-1 | FUEL SYSTEM PRESERVATION SUPPLY AND DRAINAGE ADAPTER KIT | 2 | |
| B71035-3 | HOSE ADAPTER ASSY | 1 | |
| B71044 | TORQUE ADAPTER ACCESS LATCHES DOOR NACLE STRUT | 1 | |
| B71044-10 | B71044-10 – ADAPTER EQUIPMENT, LOAD TEST (PRESSURE RELIEF DOOR LATCH) | 6 | |
| B71044-37 | B71044-37 – ADAPTER EQUIPMENT, LOAD TEST (PRESSURE RELIEF DOOR LATCH) | 4 | |
| B952 | FUEL QUANTITY ADAPTER SET 6150-00-408-3005 | 1 | |
| BAK400 | COAXIAL ADAPTER KIT | 1 | |
| BAT-195-1 | Rivet Set Shank Adapter - Shank Opening: .498 Rivet Set to be Used: .401 | 1 | |
| BAT-195-2 | Rivet Set Shank Adapter - Shank Opening: .401 Rivet Set to be Used: .498 | 1 | |
| BAWA-6 | EMB 170-175 MLG AXLE NUT ADAPTER 3" - 6 POINT. DRIVE 3/4" | 1 | |
| BEI3840 | MAIN WHEEL ADAPTER ASSY (P/N 3-1573-1) | 1 | |
| BEI3840-12-1-P1 | WHEEL ADAPTER RINGS | 1 | |
| BEI3840-121-P2 | MAIN WHEEL ADAPTER ASSY(FOR 2612311-1) | 1 | |
| BEI3840-125-P1 | NOSE WHEEL ADAPTER ASSY(FOR 2607825-2) | 1 | |
| BEI3840-128-P1 | WHEEL ADAPTER FOR WHEEL ASSEMBLY | 1 | |
| BEI3840-132-P1 | WHEEL ADAPTER FOR WHEEL ASSEMBLY | 1 | |
| BEI3840-1470-P1 | WHEEL ADAPTER FOR PN 9000581, MFG : BAUER INC | 1 | |
| BEI3840-182-P1 | WHEEL ADAPTER FOR PN 90002313, MFG : BUAER INC | 1 | |
| BEI3840-234-P1 | BAUER WHEEL ADAPTER P/N 3-1268-4 (BRAND NAMEEQUAL) MODEL BEI3840-234-P1 | 1 | |
| BEI3840-243-P1 | BAUER WHEEL ADAPTER P/N 3-1634 (BRAND NAMEEQUAL) MODEL BEI3840-243-P1 | 1 | |
| BH2795 | TEMP CAL ADAPTER PROBE | 1 | |
| BH27956 | TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 1 | |
| BH405 | CABLE ADAPTER ASSY | 7 | |
| BM403 | BAROMETRIC PRESSURE SWITCH TEST BOX & ADAPTER HARNESS (HEWLETT-PACKARD MODEL 1862-C MEGGER MODEL BM403) | 1 | |
| BOGERT 30M-AJM | JACK BOTTLE WITH FLAT ADAPTER PAD | 1 | |
| BPHC4-4-49SCO | FILL ADAPTER 1/4 | 1 | |
| BQC4BANK2ZN | HOSE: CONNECTOR,PITOT TEST, ADAPTER TO AIR DATA TEST SET | 2 | |
| BT-BS-618BT | STRAP WRENCH ADAPTER - HANDLE-LESS | 2 | |
| BT-DAB | Drive Adapter Block | 1 | |
| BT-S-550 | 24 Piece Adapter Jaw Set for BT-VS-500 | 2 | |
| BUSH-T-209 | BUSHING ADAPTER (4ITEMS) | 1 | |
| C.36001-17 | MALE ADAPTER MS4 | 6 | |
| C.36001-18 | UNION ADAPTER AN4/MS4 | 3 | |
| C01B03 | HOLD ON DUAL FOOT VALVE ADAPTER PUSH/PULL | 1 | |
| C07002-1 | JACK WING ADAPTER KIT | 29 | |
| C07002-2 | JACKING ADAPTER WING | 10 | |
| C07002-5 | SPACER ADAPTER JACK | 1 | |
| C07004-1 | JACKING ADAPTER AFT BODY | 24 | |
| C07004-1 / C07004-2 | JACKING POINT ADAPTER AFT BODY | 1 | |
| C07004-1 | AFT BODY JACK ADAPTER | 24 | |
| C07004-2 | JACKING POINT ADAPTER AFT BODY | 10 | |
| C07004-2 / C07004-1 | JACKING POINT ADAPTER AFT BODY | 1 | |
| C07007-1 | JACKING POINT ADAPTER FWD BODY STA 294.5 | 14 | |
| C07007-11 | JACKING ADAPTER FWD BODY | 8 | |
| C07007-12 | JACKING ADAPTER FWD BODY | 5 | |
| C07007-19 | Fwd body jack adapter C07007-1 | 19 | |
| C07007-19 | FORWARD BODY JACK ADAPTER | 19 | |
| C07007-2 | JACKING POINT ADAPTER FWD BODY STA 294.5 | 1 | |
| C07007-23 | JACK ADAPTER - FORWARD BODY0 | 1 | |
| C077002-1 | MLG JACK ADAPTER | 1 | |
| C175 | HEXAGONAL MALES ADAPTER M4 (ELTA) | 1 | |
| C184-02447-CTG | DATA ADAPTER CABLE | 1 | |
| C21004-1 | JACK ADAPTER - I/R | 1 | |
| C21005-1 | Hoist Adapter - Air Conditioning Pack | 3 | |
| C21005-1/70 | HOIST ADAPTER - AIR CONDITIONING PAC | 1 | |
| C21005-2 | HOIST ADAPTER ASSY | 1 | |
| C21005-62 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 3 | |
| C21005-63 | HOIST ADAPTER ASSY | 1 | |
| C21005-70 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 9 | |
| C21005-70 | HOIST ADAPTER – INSTALLATION/REMOVL | 9 | |
| C21005-71 | HOIST ADAPTER ASSY | 1 | |
| C22971 | NLG Jack Adapter (Special) | 5 | |
| C2400-78 | JACK ADAPTER IDG | 1 | |
| C24002 | IDG JACK ADAPTER | 2 | |
| C24002 FAS | SUPPORT ADAPTER (IN 0003433) | 1 | |
| C24002-31 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 1 | |
| C24002-32 | VSCF Adapter Assy | 1 | |
| C24002-39 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 5 | |
| C24002-40 | JACK ADAPTER -0 IDG | 4 | |
| C24002-41 | 1 ADAPTER JACK DIG | 6 | |
| C24002-45 | JACK ADAPTER - IDG | 2 | |
| C24002-46 | JACK ADAPTER IDG | 2 | |
| C24002-68 | Jack Adapter Assy | 2 | |
| C24002-69 | JACK ADAPTER ASSY | 1 | |
| C24002-70 | JACK ADAPTER IDG | 1 | |
| C24002-77 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 14 | |
| C24002-78 | Jack Adapter - Variable Speed Constant Frequency (VSCF) and Integrated Drive Generator (IDG) | 16 | |
| C24002-79 | Jack Adapter Assy | 1 | |
| C24002-80 | Jack Adapter Assy | 2 | |
| C27007-32 | CABLE ADAPTER ASSY | 5 | |
| C27017-1 | KIT ADAPTER TORQUE F | 3 | |
| C27020-1 | Torque Wrench Adapter - LE Slat | 2 | |
| C27024-2 | Wrench adapter assy | 1 | |
| C27039-2 | TORQUE ADAPTER - H/S BEARING | 2 | |
| C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 6 | |
| C27040-29 | Hoist Adapter - Installation/Removal, Flap Track (CE) | 5 | |
| C27048-1 | VISE ADAPTER EQPT- ACTUATOR, L.E. FLAP | 1 | |
| C27050-5 | Hoist Adapter Assy | 5 | |
| C27060-1 | CONTROL WHEEL ADAPTER EQUIPMENT | 24 | |
| C27060-22 | EQUIP ADAPTER CONTRO | 7 | |
| C27064 | Torque Wrench Adapter - Manual Stabilizer Trim Wheel | 1 | |
| C27064-1 | Torque Wrench Adapter - Manual Stabilizer Trim Wheel | 17 | |
| C27084-2 | PULLEY ADAPTER ASSY | 1 | |
| C28001-2 | Sump Drain Adapter Cent Tank | 1 | |
| C29006-27 | B737 TOOLING - ADAPTER - GROUND SERVICE CONNECTION | 7 | |
| C32012-12 | SOCKET ADAPTER NX243 | 27 | |
| C32013 | TORQUE WRENCH ADAPTER AFT BRG RTNR NUT MLG TRUN | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 5 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32021-5 | Red Transducer Adapter Assembly | 1 | |
| C32027-27 | Puller Adapter Assembly | 1 | |
| C32027-5 | Trigger Test Adapter | 1 | |
| C32028-5 | Sling Adapter Assy | 1 | |
| C32029-3 | Wrench Adapter Assy | 4 | |
| C32029-31 | Wrench Adapter Assy | 4 | |
| C32029-31 | WRENCH ADAPTER ASSEMBLY | 4 | |
| C32029-38 | ASSEMBLY - WRENCH ADAPTER (C32029-6, PART OF KIT C32029-38 OR C32029-45) | 6 | |
| C32029-39 | Wrench Adapter Assy | 7 | |
| C32029-4 | Wrench Adapter Assy | 3 | |
| C32029-45 | WRENCH ADAPTER ASSY KIT | 19 | |
| C32029-48 | Wrench Adapter | 6 | |
| C32029-49 | WRENCH ADAPTER ASSY | 6 | |
| C32029-5 | Wrench Adapter Assy | 2 | |
| C32029-50 | Wrench Adapter | 5 | |
| C32029-55 | Wrench adapter assy | 1 | |
| C32029-6 | Wrench Adapter Assy | 6 | |
| C32029-7 | Wrench Adapter Assy | 6 | |
| C32031-3 | Push Adapter Assy | 3 | |
| C32031-3PM | PUSH ADAPTER ASSEMBLY | 1 | |
| C32031-5 | Pull Adapter Assy | 4 | |
| C32031-5PM | PULL ADAPTER ASSEMBLY | 1 | |
| C32048-1 | MLG UPLOCK ADAPTER ASSY | 15 | |
| C32051-10 | 1/4" Hydralic Tube Adapter Assy | 2 | |
| C32051-11 | 3/8 Inch Hydraulic tube Adapter Assembly | 2 | |
| C32051-12 | 1/2 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-13 | 5/8 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-14 | 3/4 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-15 | 1 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-16 | Bleeder Valve Adapter Assy | 4 | |
| C32051-5 | Red Transducer Adapter Assemby | 1 | |
| C32051-6 | Blue Transducer Adapter Assembly | 1 | |
| C32051-7 | Yellow Transducer Adapter Assembly | 4 | |
| C32051-8 | Green Transducer Adapter Assembly | 1 | |
| C32062-1 | WRENCH ADAPTER –GLAND NUT, SOCKET STRUT MLG | 4 | |
| C36001-16 | MALE ADAPTER AN4/MS4 | 7 | |
| C36001-17 | MALE ADAPTER AN4/MS4 | 6 | |
| C36001-18 | UNION ADAPTER AN4/MS4 | 3 | |
| C37099-103 | TOOL ADAPTER PRESSURE TEST VALVE | 4 | |
| C44001-1 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 2 | |
| C44001-48 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 6 | |
| C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 6 | |
| C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - ADAPTER PLATE LIFT ASSY, C44001-50 (INCLUDED IN C44001-55 KIT)/ C44001-60 (INCLUDED IN C44001-58 KIT) | 5 | |
| C47241 | MLG TORQUE ADAPTER A | 4 | |
| C47943 | C47943 ADAPTER - FORWARD LANDING GEAR BARREL SCISSORS MIDDLE PIN NUT | 5 | |
| C49004-10 | Aft Adapter Assy - GTCP 85-129 APU | 7 | |
| C49004-11 | Fwd Adapter Assy - GTCP 36-280 APU | 3 | |
| C49004-12 | Aft Adapter Assy - GTCP 36-280 APU | 2 | |
| C49008-37 | 737 Classic and NG APU JACKING ADAPTER EQUIP. | 11 | |
| C52007-1 | Torque Wrench Adapter Equipment - Automatic Overwing Exit Hatch | 12 | |
| C52007-8 | Torque wrench adapter eqpt automatic overwing exit hatch | 2 | |
| C52008-1 | WRENCH TORQUE ADAPTER (SM) | 20 | |
| C5ADVANCEDCLKCABLE | C5ADVANCEDCLKCABLE;Conn Coax SMA Advanced Timing Adapter SMA Female to DIN Female - Three Legs | 1 | |
| C5EXTCLKCABLE | C5EXTCLKCABLE;Conn Coax SMA Single Adapter SMA Female to DIN Female | 1 | |
| C5TEM2-ATT | C5TEM2-ATT;ATT package TEM2 w portable antenna and adapter N-Type to SMA | 1 | |
| C622G4001101 | FREQUENCY ADAPTER ADJUSTMENT TOOL | 1 | |
| C71020-25 | Bracket - Dynamometer Adapter Assy | 1 | |
| C71040-2 | AFT mount FWD bolt adapter assy | 1 | |
| C71044-28 | PRESSURE RELIEF DOOR LATCH LOAD TEST ADAPTER EQUIPMENT | 1 | |
| C72977-59 | LONG ADAPTER ASSY | 1 | |
| C72977-60 | SHORT ADAPTER ASSY | 1 | |
| C73001-1 | Remove/Install Adapter - CFM56-3 Fuel Pump and Main Eng.Control | 1 | |
| C78009-40 | JACK ADAPTER ASSEMBLY | 1 | |
| C78009-73 | JACK ADAPTER ASSEMBLY | 1 | |
| CA80100-0001 | JACKING REAR FUSELAGE ADAPTER ( CN 295 ) | 2 | |
| CAT4559−1B | Torque Adapter − NLG Ring Nut | 1 | |
| CB-21158148-002 | CB-21158148-002;USB External Audio Adapter Cable MSAM-V2 | 1 | |
| CB-DCCLK | CB-DCCLK;DATACOM PIM Clock Adapter Cable | 1 | |
| CBC-40-0601F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-0623F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-0801F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-0823F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-1001F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-1023F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-1201F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-1223F | FTI Offset Adapter flush Nosecap | 1 | |
| CBC-40-1423S | OFFSET ADAPTER JAWSET | 1 | |
| CBM-14-3-N-1OA-20-V1 | special offset adapter mandrel | 1 | |
| CEPTICS | UK ADAPTER FOR INDIAN PINS | 1 | |
| CGA 540 | REFILL COUPLING CGA 540 X 0.563 - 18UNF-2B THREADS REGULATOR TEST ADAPTER AVOX SYSTEMS (SAFRAN) | 1 | |
| CHA700-224 | ADAPTER ADAPTER BACKLASH CHECKING | 6 | |
| CHIPI-X10 | CHIPI-X10 ADAPTER RS232 TO USB | 1 | |
| CIT-BFTA-A17-060 | FIBER OPTIC ADAPTER CABLE | 1 | |
| CIT-BFTA100-A17-060 | COM-15041 ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE DATA LOAD PORT) | 1 | |
| CIT-BFTA100-K04 | B787 FIBRE OPTIC TEST ADAPTER KIT | 1 | |
| CIT-BFTA100-K04 REVA | B787 FIBRE OPTIC TEST ADAPTER KIT | 1 | |
| CIT-BFTA100-K04 REVC | B787 FIBRE OPTIC TEST ADAPTER KIT | 1 | |
| CJ250-A1310 | A1310 ADAPTER FOR CJ250 | 1 | |
| CJ270-A1310 | A1310 ADAPTER FOR CJ270 | 1 | |
| CJ420-A1310 | A1310 ADAPTER FOR CJ420A | 1 | |
| CJ520-A1310 | A1310 ADAPTER FOR CJ520A | 1 | |
| CJMD107-003 | JACK ADAPTER - AXLE | 3 | |
| CJMD207-003 | JACK ADAPTER (550 AIRPLANES -0627 THRU 0800, S550 AND 560 - 0001 THRU - 0538) | 5 | |
| CJMDX21-001 | TRONAIR K-1288 – CPU ADAPTER KIT FOR SELECT CESSNA CITATION AIRCRAFT | 5 | |
| CM-S-229 | (MTO) ADAPTER TOOL SET (ALUMINUM) | 1 | |
| CM-S-264 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool Set | 3 | |
| CM-S-264R | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool Set | 2 | |
| CM-S-288 | MIL-DTL-28840 Adapter Tool Set | 3 | |
| CM-S-288R | MIL-DTL-28840 Adapter Tool Set | 3 | |
| CM-S-389B | MIL-DTL-38999 Series IV Adapter Tool Set | 2 | |
| CM-S-389BR | MIL-DTL-38999 Series IV Adapter Tool Set | 2 | |
| CM-S-389L | MIL-DTL-38999 Series I Adapter Tool Set | 3 | |
| CM-S-389LR | MIL-DTL-38999 Series I Adapter Tool Set | 2 | |
| CM-S-389S | MIL-DTL-38999 Series II Adapter Tool Set | 3 | |
| CM-S-389SAB | MIL-DTL-38999 Series II Adapter Tool Set | 2 | |
| CM-S-389T | MIL-DTL-38999 Series III Adapter Tool Set | 4 | |
| CM-S-389T-SS | (MTO) ADAPTER TOOL SET (STEEL) | 1 | |
| CM-S-389TR | MIL-DTL-38999 Series III Adapter Tool Set | 2 | |
| CM-S-389TR-SS | (MTO) ADAPTER TOOL SET (STEEL) | 1 | |
| CM-S-5015 | AS50151 and MIL-DTL-83723 Series II Adapter Tool Set | 2 | |
| CM-S-5015-SS | AS50151 and MIL-DTL-83723 Series II Adapter Tool Set | 2 | |
| CM-S-5015M | AS50151 Adapter Tool Set | 2 | |
| CM-S-5015R | AS50151 Adapter Tool Set | 2 | |
| CM-S-5015RM | AS50151 Adapter Tool Set | 2 | |
| CM-S-5015RS | AS50151 Adapter Tool Set | 2 | |
| CM-S-5015S | AS50151 Adapter Tool Set | 3 | |
| CM-S-602 | Pattern 602 Adapter Tool Set | 2 | |
| CM-S-801 | MICRO CONNECTORS 2M801 and 801 Adapter Tool Set | 2 | |
| CM-S-801R | MICRO CONNECTORS 2M801 and 801 Adapter Tool Set | 2 | |
| CM-S-805 | MICRO CONNECTORS 2M805 and 805 Adapter Tool Set | 2 | |
| CM-S-805R | MICRO CONNECTORS 2M805 and 805 Adapter Tool Set | 2 | |
| CM-S-815L | MIL-C-81511 Series I and III Adapter Tool Set | 2 | |
| CM-S-815R | MIL-C-81511 Series I, II, III, and IV Adapter Tool Set | 2 | |
| CM-S-815S | MIL-C-81511 Series II and IV Adapter Tool Set | 2 | |
| CM-S-837 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 3 | |
| CM-S-837RB | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 2 | |
| CM-S-837SS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool Set | 2 | |
| CM-S-SJT | (MTO) ADAPTER TOOL SET (ALUMINUM) | 1 | |
| CM229-12 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-14 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-16 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-18 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-20 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-22 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-24 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-36 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229-40 | MIL-DTL-22992 CLASS C, J, R Adapter Tool | 2 | |
| CM229L-28 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-32 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-44 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-48 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM229L-52 | MIL-DTL-22992 CLASS L Adapter Tool | 2 | |
| CM264-10 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-10S | (MTO) ADAPTER TOOL- STEEL | 1 | |
| CM264-12 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-12S | (MTO) ADAPTER - STEEL | 1 | |
| CM264-14 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-14S | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-16 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-16S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264-18 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-20 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-20S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264-22 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-22S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264-24 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-8 | MIL-DTL-26482 Series I, II, MIL-DTL-83723 Series I Adapter Tool | 2 | |
| CM264-8S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264R-10 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-10S | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM264R-12 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-12S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264R-14 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-16 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-16S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264R-18 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-20 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-22 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-22S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM264R-24 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-8 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adapter Tool | 2 | |
| CM264R-8S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM288-11A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-11B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-13A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-13B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-15A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-15B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-17A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-17B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-19A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-19B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-23A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-23B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-25A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-25B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-29A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-29B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-33A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288-33B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-11A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-11B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-13A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-13B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-15A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-15B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-17A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-17B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-19A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-19B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-23A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-23B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-25A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-25B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-29A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-29B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-33A | MIL-DTL-28840 Adapter Tool | 2 | |
| CM288R-33B | MIL-DTL-28840 Adapter Tool | 2 | |
| CM389B-11 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-11S | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389B-13 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-13S | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-15 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-15S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM389B-17 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-19 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-21 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389B-23 | MIL-DTL-38999 Series 4 Adapter Tool | 2 | |
| CM389B-25 | MIL-DTL-38999 Series 4 Adapter Tool | 2 | |
| CM389BR-11 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-13 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-15 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-17 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-19 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-21 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-21S | (MTO) ADAPTER TOOL - (STEEL) | 1 | |
| CM389BR-23 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389BR-25 | MIL-DTL-38999 Series IV Adapter Tool | 2 | |
| CM389L-11 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-11S | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-13 | MIL-DTL-38999 Series I Adapter Tool | 3 | |
| CM389L-13S | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-15 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-15S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM389L-17 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-17S | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389L-19 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-21 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-23 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-25 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-25S | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-9 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389L-9S | (MTO) ADAPTER (STEEL) | 1 | |
| CM389LR-11 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-13 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-15 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-17 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-19 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-21 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-23 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-25 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389LR-9 | MIL-DTL-38999 Series I Adapter Tool | 2 | |
| CM389S-10 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-10S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM389S-12 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-12S | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-14 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-14S | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-16 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-16S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM389S-18 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-18S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM389S-20 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-22 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-22S | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-24 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-8 | MIL-DTL-38999 Series II Adapter Tool | 2 | |
| CM389S-8S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM389T-11A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-11AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-11B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-11BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-13BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-15BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-17A | MIL-DTL-38999 Series III Adapter Tool | 3 | |
| CM389T-17AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-17B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-17BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389T-19A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-19AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389T-19B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-21A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-21AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-21B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-23A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-23AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-23B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-25A | MIL-DTL-38999 Series III Adapter Tool | 3 | |
| CM389T-25AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-25B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-25BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389T-9A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9AS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389T-9BS | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389THV-11A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-11B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-13A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-13B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-15A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-15B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-17A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-17B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-19A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-19B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-21A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-21B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-23A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-23B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-25A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-25B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-9A | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389THV-9B | (MTO) ADAPTER TOOL-BELL 30-276 SERIES | 1 | |
| CM389TR-11A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-11AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-11B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-11BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-13A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-13AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-13B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-13BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-15A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-15AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-15B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-15BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-17A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-17AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-17B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-17BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-19A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-19AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-19B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-19BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-21A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-21AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-21B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-21BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-23A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-23AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-23B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-25A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-25AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-25B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-25BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-9A | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-9AS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM389TR-9B | MIL-DTL-38999 Series III Adapter Tool | 2 | |
| CM389TR-9BS | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM44343-3S | (MTO) ADAPTER TOOL (ALUM) | 1 | |
| CM5015-10 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-10S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-12 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-12S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-14 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-14S | (MTO) ADAPTER TOOL (STEEL) | 1 | |
| CM5015-16 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-165-61W-1011 | (MTO) ADAPTER (STEEL)-AMPH 165-61W-1011 | 1 | |
| CM5015-16S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-18 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-18S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-20 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-20S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-22 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-22S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-24 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-24S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-28 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-28S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-32 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-32S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-36 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 3 | |
| CM5015-36S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-40 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-40S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-44 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-44S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-48 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-48S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-8 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015-8S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015L-8 | (MTO) ADAPTER TOOL | 1 | |
| CM5015R-10 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-12 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-14 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-16 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-18 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-20 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-20S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM5015R-22 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-22S | (MTO) ADAPTER TOOL - STEEL | 1 | |
| CM5015R-24 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-24S | (MTO) ADAPTER TOOL - (STEEL) | 1 | |
| CM5015R-28 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-28S | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-32 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-36 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-40 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-44 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-48 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM5015R-8 | AS50151 and MIL-DTL-83723 Series II Adapter Tool | 2 | |
| CM602-10A | Pattern 602 Adapter Tool | 2 | |
| CM602-10B | Pattern 602 Adapter Tool | 2 | |
| CM602-12A | Pattern 602 Adapter Tool | 2 | |
| CM602-12B | Pattern 602 Adapter Tool | 2 | |
| CM602-14A | Pattern 602 Adapter Tool | 2 | |
| CM602-14B | Pattern 602 Adapter Tool | 2 | |
| CM602-16A | Pattern 602 Adapter Tool | 2 | |
| CM602-16B | Pattern 602 Adapter Tool | 2 | |
| CM602-18A | Pattern 602 Adapter Tool | 2 | |
| CM602-18B | Pattern 602 Adapter Tool | 2 | |
| CM602-20A | Pattern 602 Adapter Tool | 2 | |
| CM602-20B | Pattern 602 Adapter Tool | 2 | |
| CM602-22A | Pattern 602 Adapter Tool | 2 | |
| CM602-22B | Pattern 602 Adapter Tool | 2 | |
| CM602-24A | Pattern 602 Adapter Tool | 2 | |
| CM602-24B | Pattern 602 Adapter Tool | 2 | |
| CM602-8A | Pattern 602 Adapter Tool | 2 | |
| CM602-8B | Pattern 602 Adapter Tool | 2 | |
| CM608-22 | (MTO) ADAPTER TOOL (ALUMINUM) | 1 | |
| CM608-24 | (MTO) ADAPTER TOOL (ALUMINUM) | 1 | |
| CM801-05A | (MTO) ADAPTER PLUG 2M801/801 (A,B,E) | 1 | |
| CM801-05BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-05CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-05DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-05EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-05FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-06A | (MTO) ADAPTER PLUG 2M801/801 (A, B, E) | 1 | |
| CM801-06AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-06B | (MTO) ADAPTER PLUG 2M801/801 (C, D) | 1 | |
| CM801-06BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-06CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-06DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-06EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-06FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-07A | (MTO) ADAPTER PLUG 2M801/801 (A, B, E) | 1 | |
| CM801-07AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-07BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-07CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-07DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-07EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-07FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-08A | (MTO) ADAPTER PLUG 2M801/801 (A, B, E) | 1 | |
| CM801-08AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-08B | (MTO) ADAPTER PLUG 2M801/801 (C, D) | 1 | |
| CM801-08BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-08CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-08DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-08EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-08FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-09AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-09BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-09CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-09DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-09EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-09FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-10AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-10BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-10CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-10DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-10EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-10FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-13AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-13BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-13CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-13DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-13EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-13FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-16AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-16BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-16CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-16DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-16EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-16FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-17AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-17BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-17CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-17DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-17EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-17FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801-21A | (MTO) ADAPTER PLUG 2M801/801 (A THRU F) | 1 | |
| CM801-21AA | (MTO) ADAPTER PLUG 2M801/801 (A) | 1 | |
| CM801-21BB | (MTO) ADAPTER PLUG 2M801/801 (B) | 1 | |
| CM801-21CC | (MTO) ADAPTER PLUG 2M801/801 (C) | 1 | |
| CM801-21DD | (MTO) ADAPTER PLUG 2M801/801 (D) | 1 | |
| CM801-21EE | (MTO) ADAPTER PLUG 2M801/801 (E) | 1 | |
| CM801-21FF | (MTO) ADAPTER PLUG 2M801/801 (F) | 1 | |
| CM801R-05AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-05BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-05CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-05DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-05EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-05FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-06AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-06BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-06CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-06DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-06EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-06FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-07AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-07BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-07CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-07DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-07EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-07FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-08A | (MTO) ADAPTER RECEP 2M801/801 (A,B,F) | 1 | |
| CM801R-08AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-08B | (MTO) ADAPTER RECEP 2M801/801 (D,E) | 1 | |
| CM801R-08BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-08CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-08DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-08EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-08FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-09AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-09B | (MTO) ADAPTER RECEP 2M801/801 (D,E) | 1 | |
| CM801R-09BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-09CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-09DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-09EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-09FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-10A | (MTO) ADAPTER RECEP 2M801/801 (A,B,F) | 1 | |
| CM801R-10AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-10BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-10CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-10DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-10EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-10FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-13AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-13BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-13CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-13DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-13EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-13FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-16A | (MTO) ADAPTER RECEP 2M801/801 (A,B,F) | 1 | |
| CM801R-16AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-16BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-16CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-16DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-16EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-16FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-17A | (MTO) ADAPTER RECEP 2M801/801 (A,B,F) | 1 | |
| CM801R-17AA | (MTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-17BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-17CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-17DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-17EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-17FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM801R-21AA | (mTO) ADAPTER RECEP 2M801/801 (A) | 1 | |
| CM801R-21BB | (MTO) ADAPTER RECEP 2M801/801 (B) | 1 | |
| CM801R-21CC | (MTO) ADAPTER RECEP 2M801/801 (C) | 1 | |
| CM801R-21DD | (MTO) ADAPTER RECEP 2M801/801 (D) | 1 | |
| CM801R-21EE | (MTO) ADAPTER RECEP 2M801/801 (E) | 1 | |
| CM801R-21FF | (MTO) ADAPTER RECEP 2M801/801 (F) | 1 | |
| CM803-09A | (MTO) ADAPTER PLUG 2M803 (N, X) | 1 | |
| CM803-12A | (MTO) ADAPTER PLUG 2M803 (N, X) | 1 | |
| CM803R-09A | (MTO) ADAPTER RECEP 2M803 (N, X) | 1 | |
| CM804-05A | (MTO) ADAPTER PLUG 2M804 (A, B, E) | 1 | |
| CM804-06A | (MTO) ADAPTER PLUG 2M804/804 (A, B, E) | 1 | |
| CM804-10A | (MTO) ADAPTER PLUG 2M804 (A,B,C,E,F) | 1 | |
| CM804-10AA | (MTO) ADAPTER PLUG 2M804/804 (A) | 1 | |
| CM805-08A | (MTO) ADAPTER PLUG 2M805/805 (A, B, E) | 1 | |
| CM805-08AA | (MTO) ADAPTER PLUG 2M805/805 (A) | 1 | |
| CM805-08B | (MTO) ADAPTER PLUG 2M805/805 (C, D) | 1 | |
| CM805-09A | (MTO) ADAPTER PLUG 2M805/805 (A, B, E) | 1 | |
| CM805-09AA | (MTO) ADAPTER PLUG 2M805/805 (A) | 1 | |
| CM805-09B | (MTO) ADAPTER PLUG 2M805/805 (C,D) | 1 | |
| CM805-12AA | (MTO) ADAPTER PLUG 2M805/805 (A) | 1 | |
| CM805-15DD | (MTO) ADAPTER PLUG 2M805/805 (D) | 1 | |
| CM805-23AA | (MTO) ADAPTER PLUG 2M805/805 (A) | 1 | |
| CM805-23BB | (MTO) ADAPTER PLUG 2M805/805 (B) | 1 | |
| CM805-23CC | (MTO) ADAPTER PLUG 2M805/805 (C) | 1 | |
| CM805R-11B | (MTO) ADAPTER RECEPT 2M805/805 (D, E) | 1 | |
| CM805R-11CC | (MTO) ADAPTER RECEP 2M805/805 (C) | 1 | |
| CM805R-18AA | (MTO) ADAPTER RECEP 2M805/805 (A) | 1 | |
| CM815L-10A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-10B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-14A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-14B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-16A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-16B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-18A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-18B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-20A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-20B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-22A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-22B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-24A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-24B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-8A | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815L-8B | MIL-C-81511 Series I and III Adapter Tool | 2 | |
| CM815R-10 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-14 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-16 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-18 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-20 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-22 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-24 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815R-8 | MIL-C-81511 Series I, II, III, and IV Adapter Tool | 2 | |
| CM815S-10A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-10B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-14A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-14B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-16A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-16B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-18A | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-18B | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM815S-8 | MIL-C-81511 Series II and IV Adapter Tool | 2 | |
| CM837-10A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-10AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-10B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-10BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-12BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-14BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-16BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-18BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-20BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-22BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-24BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-28BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8A | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8A-1 | (MTO) ADAPTER TOOL - ALUMINUM | 1 | |
| CM837-8AS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8B | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8BS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8C | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8CM | (MTO) ADAPTER TOOL (ALUM) | 1 | |
| CM837-8CS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8D | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837-8DS | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-10 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-12 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-14 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-16 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-18 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-20 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-22 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-24 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-24S | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CM837RB-8 | MIL-DTL-26500 and MIL-DTL-83723 Series III Adapter Tool | 2 | |
| CMESC11-16A | (MTO) ADAPTER TOOL - ALUMINUM | 1 | |
| CMESC11-18A | (MTO) ADAPTER TOOL - ALUMINUM | 1 | |
| CMESC11-22A | (MTO) ADAPTER TOOL - ALUMINUM | 1 | |
| CMESC11-24A | (MTO) ADAPTER TOOL - ALUMINUM | 1 | |
| CMSJT-10 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-12 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-14 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-16 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-18 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-20 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-22 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-24 | PATTERN 615 Adapter Tool | 2 | |
| CMSJT-8 | PATTERN 615 Adapter Tool | 2 | |
| CN235-FAA | Dehumidifier Adapter Kit | 1 | |
| CN235-RAA | Dehumidifier Adapter Kit | 1 | |
| CO | COBALT STUBBY SIZE 3/16 THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-1248 | COBALT STUBBY 3.17MM THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-1362 | COBALT STUBBY SIZE 5/32 THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-1500 | COBALT STUBBY SIZE 21 THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-1610 | COBALT STUBBY SIZE 20 THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-1874 | COBALT STUBBY SIZE 4.76MM THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-1875 | COBALT STUBBY SIZE 3/16 THREADED SHANK ADAPTER DRILL | 1 | |
| CO101-2460 | COBALT STUBBY SIZE D THREADED SHANK ADAPTER DRILL | 1 | |
| CO102-0906 | COBALT SHORT 2.3MM THREADED SHANK ADAPTER DRILL | 1 | |
| CO102-0938 | COBALT SHORT 3/32" THREADED SHANK ADAPTER DRILL | 1 | |
| CO102-1610 | COBALT SHORT SIZE 20 THREADED SHANK ADAPTER DRILL | 1 | |
| CO102-1935 | COBALT SHORT SIZE 10 THREADED SHANK ADAPTER DRILL, 1-1/4" OAL | 1 | |
| CO103-0938 | COBALT LONG 3/32" THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-0980 | COBALT LONG 40 THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1250 | COBALT LONG 1/8" THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1285 | COBALT LONG 30 THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1362 | COBALT LONG SIZE 5/32 THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1610 | COBALT LONG SIZE 20 THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1874 | COBALT LONG SIZE 4.76MM THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1875 | COBALT LONG SIZE 3/16 THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-1935 | COBALT LONG SIZE 10 THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-2460 | COBALT LONG SIZE D THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-2500 | COBALT LONG SIZE 1/4 THREADED SHANK ADAPTER DRILL | 1 | |
| COM-11591 / SBE2219 | TEST ADAPTER ASSEMBLY | 1 | |
| COM-12461 | EFB CABLE ADAPTER FOR PMAT | 1 | |
| COM-1916 | COM-1916 PITOT TEST ADAPTER | 1 | |
| CP30506/1 | BOOTSTRAP ADAPTER KIT | 6 | |
| CP30647/1 | ENGINE SLING ADAPTER | 1 | |
| CP30839-3 | KIT - ADAPTER HOIST, RB211 ENGINES | 1 | |
| CP30862 | ENGINE SLING ADAPTER | 3 | |
| CPS200-0150 | TURBO ADAPTER SET W/CASE | 1 | |
| CS-710-169 | OPEN WRENCH ADAPTER 19MM | 1 | |
| CS-710-177 | SOCKET ADAPTER 1/4 1/4 HEX SQ | 2 | |
| CS-710-596 | HV TEST ADAPTER CABLE | 1 | |
| CS-710-600 | POWER SUPPLY ADAPTER CABLE | 1 | |
| CS-710596 | HV TEST ADAPTER CABLE | 1 | |
| CS710-169 | OPEN END WRENCH ADAPTER 19 MM | 1 | |
| CS710-596 | HV TEST ADAPTER CABLE | 1 | |
| CS710-600 | POWER SUPPLY ADAPTER CABLE | 1 | |
| CSA125678-4 | Pitot Adapter for Hawker HS-125 600-900, F-70/100, BAE-146 | 2 | |
| CSA190HTL4-4-4-4) | SMART PROBE ADAPTER LEFT | 1 | |
| CSA190HTR4-4-4-4 | SMART PROBE ADAPTER RIGHT | 1 | |
| CSA20812-4 | PITOT TEST ADAPTER | 1 | |
| CSA330-4 | PITOT ADAPTER FOR PROBE | 1 | |
| CSA75700HT-3 | PITOT ADAPTER HIGH TEMP FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 3 | |
| CSABM300HTL4-4-4-4 | Pitot Static Adapter LEFT | 1 | |
| CSABM300HTR4-4-4-4 | Pitot Static Adapter RIGHT | 1 | |
| CSERIES-945 | PRESSURE TEST ADAPTER (PITOT STATIC ADAPTOR KIT) | 3 | |
| CSERIES945 | PRESSURE TEST ADAPTER (KIT AIR DATA ACCESSORIES) | 3 | |
| CST20250-4 | Stall Warning Adapter for HS-125 600-900, F-70/100, BAE-146 | 1 | |
| CSTA320-4 | STATIC ADAPTER BAR TYPE | 1 | |
| CSTH20180-4 | Static Adapter for Hawker HS-125 600-900, F-70/100, BAE-146 | 3 | |
| CSTL19725-4 | 2. ADAPTER - STATIC TEST | 4 | |
| CT-709 | FILTER ADAPTER WRENCH | 4 | |
| CT4103 | COAX ADAPTER KIT - CAL TEST CT4103 OR EQUIVALENT | 1 | |
| CT709 | FILTER ADAPTER WRENCH | 4 | |
| CX300-ADC | CX300-ADC;Power Adapter Automotive DC-DC | 1 | |
| D0062 | Torque Adapter Steering Unit | 1 | |
| D14089-101 | VACUUM ADAPTER ASSEM | 4 | |
| D19946-101 | VACUUM ADAPTER PRE S.B. 004-25-48 | 2 | |
| D2282700 | NLG JACK ADAPTER ATR | 1 | |
| D280-00031-000W8230-03A00 | Clack valve blank adapter for fuel jet pump | 1 | |
| D2815002600200-T | TEST ADAPTER (3 IT) | 1 | |
| D412-666-011 | GROSS WEIGHT TOWING ADAPTER KIT | 3 | |
| D44-1426-1 | TOOL, ADAPTER PLATE HEIGHT | 1 | |
| D44-1426-1 (1400999-121) | 737 2KU Adapter Plate Inst Tool (gogo) (Set of 3) | 1 | |
| D46321 | Pin Adapter | 2 | |
| DA1321018-103 | Axle Jack Adapter | 1 | |
| DA4161 | TRENT 1000 TROLLEY 02 MODULE ADAPTER PLATE | 1 | |
| DA4378 | MODULE ADAPTER TROLLEY | 1 | |
| DAH 602590 | Proof Test Adapter | 1 | |
| DAH603006/1 | TORQUE ADAPTER DAH603006/2 | 1 | |
| DAPT61-0030-00 | TORQUE ADAPTER 11/16" X 1/2" PROPELLER NUTS MOUNTING | 1 | |
| DB75-108 | DB75-108, ADAPTER - STARTER DRAIN, ENGINE, 13-01, PRENDERGAST | 3 | |
| DC-10-22-10-03 | CENTRAL AIR DATA COMPUTER-REMOTE TEST ADAPTER ( DC-10 ) | 1 | |
| DC10-22-10-03 | CENTRAL AIR DATA COMPUTER-REMOTE TEST ADAPTER ( DC-10 ) | 1 | |
| DCM1630-1 | INSTL/RML - MLG ADAPTER TOOLING | 1 | |
| DCM1885-THUMBSCREW-REVNC | KEYWAY ADAPTER FOR DB37 BACKSHELL - THUMBSCREW | 1 | |
| DG-200 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT, COM-754 | 11 | |
| DGSAJA-1S-101 | Axle Jack Adapter | 1 | |
| DH8 - 723M | Q400 PITOT/STATIC PRESSURE ADAPTER KIT "Q400" | 10 | |
| DH8-7-612 | TEST ADAPTER SET, PITOT STATIC | 6 | |
| DH8-723 | Q400 PITOT/STATIC PRESSURE ADAPTER KIT | 3 | |
| DH8-723 DH8 - 723M | PITOT/STATIC PRESSURE TEST ADAPTER KIT | 1 | |
| DH8-723M | PITOT STATIC ADAPTER KIT | 10 | |
| DH8-834 | PITOT/STATIC PRESSURE TEST ADAPTER KIT (OR EQUIVALENT) | 1 | |
| DH8-834M | PITOT STATIC PRESSURE TEST ADAPTER KIT | 3 | |
| DHA-HH60J-LA | Dehumidifier Adapter Kit | 1 | |
| DHA-HHA60J-SA | Dehumidifier Adapter Kit | 1 | |
| DIN-124272999 | LCS WAND 15 INCL. ADAPTER AZ 10" | 1 | |
| DIN-124280999 | LCS WAND 18 INCL. ADAPTER AZ 10" | 1 | |
| DJ143W0026 | Drill jig radome adapter plate section 43 | 1 | |
| DJS35263 | TORQUE ADAPTER WRENCH | 2 | |
| DM335 | WATER FAUCET TEST ADAPTER (2IT) | 1 | |
| DMAK-A320 | Kit#ADT Adapter Kit A320 fam. | 3 | |
| DMAK-A320X-E18K2P0V3 | STANDARD PITOT STATIC ADAPTER KIT | 1 | |
| DMAK-A320X-E1K0P0V3 | STANDARD PITOT STATIC ADAPTER KIT | 1 | |
| DMAK-AB206 | MARCHIORI UNIVERSAL STATIC ADAPTER BASIC SET | 1 | |
| DMAK-AS350B | MARCHIORI UNIVERSAL STATIC ADAPTER BASIC SET | 1 | |
| DMAK-AW109-1P | MARCHIORI UNIVERSAL STATIC ADAPTER BASIC SET | 1 | |
| DMAK-AW109-1PV | MARCHIORI UNIVERSAL STATIC ADAPTER BASIC SET | 1 | |
| DMAK-AW139-1P | PITOT STATIC ADAPTER KIT | 2 | |
| DMAK-B737 678 | PITOT STATIC ADAPTER KIT | 3 | |
| DMAK-B737-678 | PITOT STATIC ADAPTER KIT | 3 | |
| DMAK-B747 | PITOT STATIC ADAPTER KIT | 2 | |
| DMAK-B757 | PITOT STATIC ADAPTER KIT | 2 | |
| DMAK-B767 | PITOT STATIC ADAPTER KIT | 2 | |
| DMAK-B777 | PITOT STATIC ADAPTER KIT | 2 | |
| DMAK-C-130HA | C-130H PITOT/STATIC ADAPTER KIT | 1 | |
| DMAK-EJ170A | EMBRAER ADAPTER KIT | 1 | |
| DMAK-G650 | AIR DATA ADAPTER KIT | 1 | |
| DMAK-PC12X-E1K0P0V3 | HOSE KIT FOR ADAPTER KIT DMAK-PC12 | 1 | |
| DMAK320 | PITOT STATIC ADAPTER KIT | 2 | |
| DMAKA318-21VA3 | Kit#ADT Adapter Kit A320 fam. | 1 | |
| DMC1682 | MIL-SPEC Adapter Tool Kit | 2 | |
| DMC2175 | D38999 Connectors Adapter Tool Set | 2 | |
| DN7ABF | -7 ADAPTER ASSEMBLY | 1 | |
| DPI610 | PITOT STATIC LEAK CHECK ADAPTER | 11 | |
| DPPH-150 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT | 3 | |
| DR1502D00 | WHEEL ADAPTER KIT | 1 | |
| DRCADPH10-76/9100 | HEADSET ADAPTER WITHOUT PTT; MUST BE COMPATIBLE WITH H10-76 OR EQUAL HEADSET | 1 | |
| DRCADPH10-76/9100/U94 | DAVID CLARK HEADSET ADAPTER WITH PTT; MUST BE COMPATIBLE WITH H10-76 OR EQUAL HEADSET | 1 | |
| DRT66677 | BLEED ADAPTER (8 OFF) | 1 | |
| DRT68032 | TORQUE ADAPTER MWA | 10 | |
| DRT68822 | TORQUE ADAPTER MWA | 9 | |
| DSR2037-10 | ADAPTER 3/8 IN. SQ. DRIVE | 1 | |
| DSR2037-14 | ADAPTER 3/8 IN. SQ. DRIVE | 1 | |
| DSR2037-15 | ADAPTER 3/8 IN. SQ. DRIVE | 1 | |
| DSR2039-8 | ADAPTER 3/8 IN. SQ. DRIVE | 1 | |
| DT-600 | ANALYZER - DATABUS, ARINC 429/629 (FORMER P/N 01-1405-00; DT600-00-110 FOR 110V & DT600-00-220 FOR 220V). INCLUDES ARINC 429/629 ADAPTER CABLES. ARINC 629 CABLE IS TO BE USED WITH A CUSTOMER SUPPLIED ARINC 629 COUPLER. | 4 | |
| DT600 | Analyzer - Databus, Datatrac 650H (DT650H). Includes Arinc 629 Adapter Cable To Be Used With Customer Furnished Arinc 629 Coupler. | 4 | |
| DZZ0011-1 | HOIST ADAPTER AND SUPPORT | 3 | |
| DZZ0011-505 | HOIST ADAPTER AND SUPPORT | 1 | |
| DZZ0012-501 | ADAPTADOR GATO DE ALA ( WING JACKING ADAPTER ) | 1 | |
| DZZ0014-1 | TORQUE ADAPTER WRENCH SET | 3 | |
| DZZ0014-1-GSE | TORQUE ADAPTER WRENCH | 1 | |
| DZZ0014-5-392 | TORQUE ADAPTER WRENCH(3/4 SIZE) | 1 | |
| DZZ0014-501 | TORQUE ADAPTER WRENCH | 1 | |
| DZZ0019-501 | FLAP ADAPTER TORQUE | 1 | |
| DZZ7022-1 | HOIST ADAPTER SET | 1 | |
| DZZ7026-1 | APU HOIST ADAPTER SET | 3 | |
| DZZ7053-1 | FUSELAGE JACK ADAPTER ASSY | 5 | |
| DZZ7061-1 | NLG TRUNNION PIN INSTALLATION ADAPTER SET | 2 | |
| DZZ7075-1 | TORQUE ADAPTER - MLG TRUCK PIV | 1 | |
| DZZ7080-1 | KIT HOIST ADAPTER NLG | 1 | |
| DZZ7080-501 | NLG INSTALLATION ADAPTER SET | 2 | |
| DZZ7139-1 | KIT ADAPTER TRUNNIO | 1 | |
| DZZ7153-1 | PAX DOOR TEST ADAPTER SET | 1 | |
| DZZ7213-1 | CARGO DOOR RIGTORQUE ADAPTER F | 1 | |
| DZZ7316-1 | HOISTING ADAPTER SET, ELEVATOR | 1 | |
| Delta-P Test Stand | Pressure test system for leak detection fuselage, including adapter A320 cargo door | 1 | |
| E0013 | Grease Gun Adapter Gearbox Drive Shaft | 1 | |
| E09404-P05 | FWD MOUNT ADAPTER LH | 1 | |
| E09404-P06 | FWD MOUNT ADAPTER RH | 1 | |
| E10-31972-1 | VARIABLE STATOR VALVE ADAPTER SET | 1 | |
| E10806-P01 | LH ENGINE CRADLE ADAPTER / FROM 9C6025P02 | 1 | |
| E20019 | OPTION ADAPTER MT100/MT1000 | 1 | |
| E54-212-01 | HANDSET ADAPTER KIT | 1 | |
| E54-212-06 | HANDSET ADAPTER KIT USB GRAY 18 | 1 | |
| E8115C-APC | E8115C-APC;OTDR Module C 1550nm APC connector - SC adapter Std | 1 | |
| E8115D-APC | E8115D-APC;OTDR Module D 1550nm APC connector - SC adapter Std | 1 | |
| E81162C-APC | E81162C-APC;OTDR Module C filtered 1625nm APC connector - SC adapter Std | 1 | |
| E81162D-APC | E81162D-APC;OTDR Module D filtered 1625nm APC connector - SC adapter Std | 1 | |
| E81165C-APC | E81165C-APC;OTDR Module C filtered 1650nm APC connector - SC adapter Std | 1 | |
| E81165D-APC | E81165D-APC;OTDR Module D Filtered 1650nm APC connector - SC adapter Std | 1 | |
| E8118RUHR65-APC | E8118RUHR65-APC;High Resolution OTDR Module filtered 1650nm APC connector - SC adapter Std | 1 | |
| E8123AV-PC | E8123AV-PC;High Resolution OTDR Module AV 850/1300nm PC connector - SC adapter Std | 1 | |
| E8126C-APC | E8126C-APC;OTDR Module C 1310/1550nm APC connector - SC adapter Std | 1 | |
| E8126C-PC | E8126C-PC;OTDR Module C 1310/1550nm PC connector - SC adapter Std | 1 | |
| E8126D-APC | E8126D-APC;OTDR Module D 1310/1550nm APC connector - SC adapter Std | 1 | |
| E8126D-PC | E8126D-PC;OTDR Module D 1310/1550nm PC connector - SC adapter Std | 1 | |
| E8129D-62-APC | E8129D-62-APC;OTDR Module D 1550/Filtered 1625nm APC connector - SC adapter Std | 1 | |
| E8129D-62-PC | E8129D-62-PC;OTDR Module D 1550/Filtered 1625nm PC connector - SC adapter Std | 1 | |
| E8136C-APC | E8136C-APC;OTDR Module C 1310/1550/1625nm APC connector - SC adapter Std | 1 | |
| E8136C-PC | E8136C-PC;OTDR Module C 1310/1550/1625nm PC connector - SC adapter Std | 1 | |
| E8136D-APC | E8136D-APC;OTDR Module D 1310/1550/1625nm APC connector - SC adapter Std | 1 | |
| E8136D-PC | E8136D-PC;OTDR Module D 1310/1550/1625nm PC connector - SC adapter Std | 1 | |
| E81BBS2A-APC | E81BBS2A-APC;Broadband Source Module for CD/PMD/AP APC connector - SC adapter Std | 1 | |
| E81BBS2A-PC | E81BBS2A-PC;Broadband Source Module for CD/PMD/AP PC connector - SC adapter Std | 1 | |
| EAX0046E01A | QUAD ADAPTER LEAD SIA2000(COP | 1 | |
| ECR | SOCKET ADAPTER TYPE 6.35 MM (0.25 IN) | 1 | |
| EDT1300 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1305-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1305-PLUS | AIR PUNCH ADAPTER ASSEMBLY, SIZES 5/32-1/2 | 1 | |
| EDT1306-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1308-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1310-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1312-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EECT900-10 | 5 VOLT ADAPTER MULTI-PROBE | 1 | |
| EEFB301M | FUSE BUDDY DMM ADAPTER MINI | 1 | |
| EEFB315-1 | ATC FUSE ADAPTER FOR EEFB315 | 1 | |
| EEFB315-2 | MINI FUSE ADAPTER FOR EEFB315 | 1 | |
| EEHD448015 | PC ADAPTER CAT 9 PIN DEUTSCH | 1 | |
| EEHD493128 | 9-PIN DEUTSCH ADAPTER - 1 METE | 1 | |
| EEHD494124 | 6-PIN DEUTSCH ADAPTER 1 METER | 1 | |
| EEHD496090 | AC ADAPTER 5V 2A USB C | 1 | |
| EELD500-2 | LARGE ADAPTER CONE | 1 | |
| EELD600HD-1A | TURBO ADAPTER 35, 40, 45MM | 1 | |
| EELD600HD-2 | TURBO ADAPTER 110, 115, 120MM | 1 | |
| EELD600HD-3 | TURBO ADAPTER 125, 130, 135MM | 1 | |
| EELD700A-25 | 12.6MM MALE ADAPTER ASSY | 1 | |
| EELD700A-26 | 9.89MM MALE ADAPTER ASSY | 1 | |
| EELD700A-27 | 7.89MM MALE ADAPTER ASSY | 1 | |
| EELD700A-28 | 9.49MM MALE ADAPTER ASSY | 1 | |
| EETA309A05A | 2NDARY COIL ADAPTER LEAD M-VP | 1 | |
| EINST20SW-AD | EINST20SW-AD;USB Adapter for Instrument to Optical Switch | 1 | |
| EMB-00553-001 | PCU ADAPTER WRENCH | 1 | |
| EMS-MPO | EMS-MPO;MTP/MPO BULKHEAD ADAPTER WITH OPPOSED KEY | 1 | |
| EO 07.10.69 | MOORING ADAPTER F100 | 1 | |
| EP33-20-101 | TEST ADAPTER CLS A350 | 1 | |
| ES125111-3 | FUEL QUANTITY ADAPTER TEST SET | 1 | |
| ESI190-5 | RELAY ADAPTER SET | 1 | |
| EUFCADS | EUFCADS;FC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- | 1 | |
| EUFCADSMM | EUFCADSMM;FC UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EULCADS | EULCADS;LC-PC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- blue color | 1 | |
| EULCADS-APC | EULCADS-APC;LC-APC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- green color | 1 | |
| EULCADSMM | EULCADSMM;LC UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EUPP125PM | EUPP125PM;1.25 mm UPP adapter for PM mainframe option | 1 | |
| EUPP125PM-10 | EUPP125PM-10;Pack of 10 1.25 mm UPP adapter for PM mainframe option | 1 | |
| EUSCADS | EUSCADS;SC-PC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- blue color | 1 | |
| EUSCADS-APC | EUSCADS-APC;SC-APC UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- green color | 1 | |
| EUSCADSMM | EUSCADSMM;SC UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EUSTADS | EUSTADS;ST UNIVERSAL ADAPTER FOR OTDRS -SCREW TYPE- | 1 | |
| EUSTADSMM | EUSTADSMM;ST UNIVERSAL ADAPTER - SCREW TYPE - FOR MM PORT | 1 | |
| EX9220 | HPGC ADAPTER FOR JETSTART | 1 | |
| F 7033-24 | JACK AND ADAPTER ASSY (GENERATOR AND CSD) (TEKLE PARA SUBIR Y BAJAR UNIDADES | 1 | |
| F-28SM-03 | FIBER OPTIC ADAPTER SC-SC | 3 | |
| F07001-11 | JACK ADAPTER FWD BODY B767 | 1 | |
| F533-R1115-000W6400-01 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=953 | 1 | |
| F533-R1115-000W6400-02 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=953 | 1 | |
| F533-R1115-000W6400-03 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=1456 | 1 | |
| F533-R1115-000W6400-04 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=1456 | 1 | |
| F533-R1115-001W6400-01 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=953 | 1 | |
| F533-R1115-001W6400-02 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=953 | 1 | |
| F533-R1115-001W6400-03 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=1456 | 1 | |
| F533-R1115-001W6400-04 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=1456 | 1 | |
| F65-0-4796 | TEST ADAPTER CABLE | 1 | |
| F65-0-4814 | TEST ADAPTER CABLE | 1 | |
| F65-0-4832 | DIELECTRIC ADAPTER PLUG | 1 | |
| F65-0-50369 | Test Adapter (Return Fitting) | 1 | |
| F65-0-50370 | Test Adapter (Pressure Fitting) | 1 | |
| F65-0-50937 | TEST ADAPTER (2 IT) | 1 | |
| F67B | RATCHET ADAPTER 3/8" | 1 | |
| F7/252 JACKSCREW | JACKSCREW ADAPTER 727 | 1 | |
| F70020 | VERTICAL FIN ADAPTER ASSY. | 1 | |
| F70085 | SPANNER ADAPTER 727 | 23 | |
| F70158-48 | TORQUE ADAPTER INSTA | 1 | |
| F70174 | THRESHOLD ADAPTER SET -0 CARGO LOADING PROVIDES | 1 | |
| F70174-1 | THRESHOLD ADAPTER -0 CARGO | 1 | |
| F70174-2 | THRESHOLD ADAPTER -0 CARGO | 1 | |
| F70174-3 | THRESHOLD ADAPTER -0 CARGO | 1 | |
| F70206-1 | ADAPTER - LEAK TRACING, FUEL, HOLLOW BOLT | 12 | |
| F70249 | APU ADAPTER STAND AND TRANS. CART THE F70249-1 | 1 | |
| F70255 | WRENCH ADAPTER -0 HOUSING NUT, ACTUATOR THIS | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70291-4 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
| F70291-5 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
| F70291-6 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
| F70291-7 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
| F70300-1 | FLAP DRIVE ADAPTER | 25 | |
| F703001 | FLAP DRIVE ADAPTER ASSY | 25 | |
| F70304-1 | VERTICAL FIN ADAPTER ASSY. | 1 | |
| F70306 | TORQUE ADAPTER -0 SKID DETECTOR NUT, MLG TO | 1 | |
| F70306-1 | Torque adapter skid detector nut main landing gear | 3 | |
| F70312-18 | TORQUE ADAPTER (WLG) | 2 | |
| F70312-20 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 2 | |
| F70312-23 | TORQUE WRENCH ADAPTER CROW-FOOT SPL-5284 | 1 | |
| F70312-25 | TORQUE WRENCH ADAPTER CROW | 2 | |
| F70312-29 | WRENCH ADAPTER - CROWFOOT, 4.515-4.525 SPAN | 5 | |
| F70312-3 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATO | 10 | |
| F70312-4 | TORQUE WRENCH ADAPTER - BOX TYPE | 9 | |
| F70326-1 | Torque Wrench Adapter -Manual Stabilizer Trim Wheel | 15 | |
| F70333 FAS | SUPPORT ADAPTER (IN 0003433) | 1 | |
| F70333-24 | JACK AND ADAPTER ASSY (GENERATOR AND CSD) (TEKLE PARA SUBIR Y BAJAR UNIDADES | 13 | |
| F71268 | WRENCH ASSY -0 AIR COND. ADAPTER SEC. TO HOLD | 1 | |
| F71420 | TEST SET & ADAPTER ASSY -0 HF COMM SYS USED AS A | 1 | |
| F71429-500 | GAGE AND ADAPTER ASSEMBLY (RUDDER CONTROL) | 1 | |
| F72386-1 | TORQUE WRENCH ADAPTER MLG | 1 | |
| F72714-2 | KIT ADAPTER LIFT SHO | 3 | |
| F72714-3 | KIT ADAPTER LIFT ENG | 4 | |
| F72731-1 | Test Set, Fuel and Oil Quantity Adapter Assembly | 1 | |
| F72731-102 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 3 | |
| F72731-114 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 3 | |
| F72731-115 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 3 | |
| F72731-116 | Test Set FUEL and Oil QTY Adapter Assy | 2 | |
| F72731-117 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 2 | |
| F72731-118 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 4 | |
| F72731-119 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 2 | |
| F72731-120 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 1 | |
| F72731-121 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 1 | |
| F72731-130 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 8 | |
| F72731-2 | Test Set, Fuel and Oil Quantity Adapter Assembly | 1 | |
| F72731-55 | Test Set, Fuel and Oil Quantity Adapter Assembly | 1 | |
| F72731-81 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 7 | |
| F72731-82 | TEST SET, FUEL AND OIL QUANTITY ADAPTER ASSEMBLY | 5 | |
| F72731-XX | Test Set. Fuel And Oil Quantity Adapter Assembly | 1 | |
| F72786-156 | BOX ADAPTER TEST | 1 | |
| F72786-157 | BOX ADAPTER TEST | 1 | |
| F72786-158 | BOX ADAPTER TEST | 1 | |
| F72823-1 | TEST ADAPTER ASSY STATIC PORT | 2 | |
| F72823-2 | Test Adapter Assembly - Static Port | 1 | |
| F72823-23 | TEST ADAPTER ASSEMBLY - STATIC PORT | 3 | |
| F72823-33 | TEST ADAPTER ASSEMBLY - STATIC PORT | 1 | |
| F72823-36 | TEST ADAPTER ASSY -0 STATIC PORT | 6 | |
| F72823-37 | TEST ADAPTER ASSY -0 STATIC PORT | 2 | |
| F72823-38 | TEST ADAPTER ASSY -0 STATIC PORT | 1 | |
| F72823-39 | TEST ADAPTER ASSEMBLY - STATIC PORT | 1 | |
| F72823-40 | TEST ADAPTER ASSEMBLY - STATIC PORT | 19 | |
| F72867-1 | EQUIPMENT - ADAPTER CONTROL WHEEL | 24 | |
| F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | 1 | |
| F72900-1 | TORQUE ADAPTER AILERON | 5 | |
| F72914 | TORQUE ADAPTER ASSY -0 RUDDER CONTROL POWER UNIT | 1 | |
| F72914-1 | Torque adapter assy-rudder control power unit instl | 2 | |
| F72915 | TORQUE WRENCH ADAPTER ASSY -0 CLAMSHELL JAM NUT. | 1 | |
| F72915-1 | Torque wrench adapter assy-clamshell jam nut | 2 | |
| F72922 | TORQUE ADAPTER -0 MLG FWD TRUNNION BOLT USED TO | 1 | |
| F72930 | TORQUE ADAPTER -0 MLG SIDE STRUT TO TORQUE FWD. | 1 | |
| F72942-2 | Lubrication Adapter Assy | 1 | |
| F72942-3 | Lubrication Adapter Assy | 1 | |
| F72942-4 | Lubricaion Adapter Assy | 1 | |
| F72942-5 | Needle Adapter Assy | 1 | |
| F72942-6 | Needle Adapter Assy | 1 | |
| F72942-7 | Needle Adapter Assy | 1 | |
| F72946-2 | Dolly. Work Stand And Adapter -Thrust Reverser | 1 | |
| F72950-1 | 727 APU ADAPTER / CART | 2 | |
| F72950-128 | APU Adapter Stand - Model 737 | 1 | |
| F72950-138 | APU ADAPTER & CART | 11 | |
| F72950-139 | APU ADAPTER STAND | 6 | |
| F72950-139JPA | ADAPTER STAND | 1 | |
| F72950-4 | APU ADAPTER - 727 | 1 | |
| F72952-1 | PROTRACTOR ADAPTER (THRUST LEVER) | 2 | |
| F72952-14 | PROTRACTOR FWD THRUST LEVER- ADAPTER SET | 10 | |
| F72952-15 | FWD THREAD PROTECTOR ADAPTER SET | 24 | |
| F72952-15 | PROTRACTOR ADAPTER (THRUST LEVER) | 24 | |
| F72952-2 | PROTRACTOR ADAPTER (THRUST LEVER) | 6 | |
| F72952-3 | KIT ADAPTER THRUST L | 1 | |
| F72954 | HOIST ADAPTER -0 AUXILIARY POWER UNIT TO HANDLE | 1 | |
| F72954-4 | Hoist adapter auxiliary power unit | 1 | |
| F72957-1 | TOWBAR AND ADAPTER AIRPLANE TOWING AND STEERING | 1 | |
| F72957-58 | TOWBAR AND ADAPTER AIRPLANE TOWING AND STEERING | 1 | |
| F72977-59 | Long Adapter Assy | 1 | |
| F72977-60 | Short Adapter Assy | 1 | |
| F72998-1 | N1 SIMULATOR ADAPTER CABLE | 1 | |
| F72998-15 | N1 SIMULATOR ADAPTER CABLE | 1 | |
| F80-4-1-1 | Torque Wrench Adapter | 1 | |
| F80-4-1-3 | Torque Wrench Adapter | 1 | |
| F80000-1 | JACKING PADS - AFT ADAPTER | 7 | |
| F80000-7 | JACK ADAPTER ASSY | 24 | |
| F80001-1 | JACKING POINT ADAPTER AFT FUSELAGE | 22 | |
| F80006-1 | TAIL JACK ADAPTER 73 | 2 | |
| F80011-1 | CRADLE ADAPTER - AC GENERATOR AND CSD | 4 | |
| F80011-16 | CRADLE ADAPTER - AC GENERATOR AND CSD | 3 | |
| F80012-1 | PIN SPANNER ADAPTER ASSEMBLY | 9 | |
| F80013-1 | NLG ADAPTER ASSEMBLY PIN SPANNER | 14 | |
| F80014-16 | Hoist Adapter - Stabilizer Jackscrew | 14 | |
| F80020-5 | TORQUE WRENCH adapter EQPT. | 17 | |
| F80032-1 | Wrench Adapter - Face Spanner Lug, MLG | 8 | |
| F80033-1 | MLG HOOK SPANNER ADAPTER WRENCH | 22 | |
| F80033-8 | SPL-10997, ADAPTER ASSY - WRENCH, HOOK SPANNER | 23 | |
| F80036 | -1 ADAPTER -0 SLOTTED 45 SPANNER | 1 | |
| F80051-1 | Wrench Adapter -Face Spanner Lug | 1 | |
| F80060-6 | JACKING POINT ADAPTER WING | 25 | |
| F80091-1 | Threshold Adapter Set -Cargo Loading | 1 | |
| F80091-3 | Threshold Adapter Set -Cargo Loading | 1 | |
| F80122-11 | U-JOINT ADAPTER EQPT | 2 | |
| F80122-12 | U-JOINT ADAPTER EQPT- | 5 | |
| F80122-13 | U-JOINT ADAPTER EQPT | 2 | |
| F80122-14 | U-JOINT ADAPTER EQPT- | 13 | |
| F80122-15 | U-JOINT ADAPTER EQPT- | 12 | |
| F80122-16 | U-JOINT ADAPTER EQPT | 11 | |
| F80167-7 | NEEDLE ADAPTER -0 WELD | 1 | |
| F80168-3 | MLG TIRE R/I ADAPTER SOCKET | 31 | |
| F80171-1 | GALLEY DOOR TORQUE ADAPTER WRENCH | 7 | |
| F80176-1 | TORQUE WRENCH ADAPTER MLG TRUNNION AFT BEARING NUTX | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 17 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 17 | |
| F80186-1 | WHEEL ADAPTER BOW | 1 | |
| F80186-3 | WHEEL ADAPTER MAIN- WHEEL REPLACEMENT | 1 | |
| F80192-1 | Torsion Test Adapter - Detent Arm, L.E. Slat | 3 | |
| F80202 | ALLEN ADAPTER NLG STEERING | 1 | |
| F80202-1 | Allen Adapter -Nose Wheel Steering Cylinder | 8 | |
| F80212-19 | CHECK ADAPTER - RUDDER PEDAL FORCE | 5 | |
| F80212-30 | CHECK ADAPTER - RUDDER PEDAL FORCE | 20 | |
| F80229 | CABLE ADAPTER ASSY-FIRE EXT SYS | 4 | |
| F80229-20 | CABLE ADAPTER ASSY-FIRE EXT SYS | 17 | |
| F80229-48 | CABLE ADAPTER ASSY-FIRE EXT SYS | 14 | |
| F80229-59 | CABLE ADAPTER ASSY-FIRE EXT SYS | 16 | |
| F80229-61 | CABLE ADAPTER ASSY-FIRE EXT SYS | 15 | |
| F80254 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| F80257 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| FB98D0130 | COM-1926 A320 ADAPTER FLUSHING AIR DATA SYSTEM | 1 | |
| FBP3-UA | FBP3-UA;Single Tip Adapter for FBP3--Rev0 | 1 | |
| FBPP-DPAC8 | FBPP-DPAC8;USB OTG Adapter Cable USB Type A Female to Micro USB Male 15cm | 1 | |
| FBPP-WIFI | FBPP-WIFI;WiFi Adapter Module for FBP-P5000i | 1 | |
| FBPT-MIL-2CPA | FBPT-MIL-2CPA;Test Probe Adapter for M38999 for FBP--Rev0 | 1 | |
| FBPT-RQX8-P | Inspection Adapter - Fiber Optic, Quadrax, Plug | 1 | |
| FBPT-UFCPT | FBPT-UFCPT;Ribbon FCPT Tip Adapter for FBP Probes | 1 | |
| FBPT-UFMA | FBPT-UFMA;Universal Flare Adapter Connects FMA Adapters to FBP | 1 | |
| FCC04-35-40000 | JACK ADAPTER (MLG, NLG) | 1 | |
| FCLT-CS-CF-MA | FCLT-CS-CF-MA;Mating Adapter for FCLT-CS-CF CleanBlast Tip | 1 | |
| FCLT-FC-CF-MA | FCLT-FC-CF-MA;Mating Adapter for FCLT-FC-CF | 1 | |
| FCLT-LC-CF-MA | FCLT-LC-CF-MA;Mating Adapter for FCLT-LC-CF Cleaning Tip | 1 | |
| FCLT-MDC-CF-MA | FCLT-MDC-CF-MA;Mating Adapter for FCLT-MDC-CF CleanBlast Tip | 1 | |
| FCLT-MMC-CF-MA | FCLT-MMC-CF-MA;Mating Adapter for FCLT-MMC-CF Cleaning Tip | 1 | |
| FCLT-MT-MA | FCLT-MT-MA;Mating Adapter for FCLT-MT CleanBlast Tip | 1 | |
| FCLT-MTP-MA | FCLT-MTP-MA;Mating Adapter for FCLT-MTP CleanBlast Tip | 1 | |
| FCLT-SC-CF-MA | FCLT-SC-CF-MA;Mating Adapter for FCLT-SC-CF Cleaning Tip | 1 | |
| FCLT-SMA-MA | FCLT-SMA-MA;Mating adapter for FCLT-SMA Cleaning Tip | 1 | |
| FCLT-SN-BTW1-CF-MA | FCLT-SN-BTW1-CF-MA;Mating Adapter for FCLT-SN-CF to BTW1 CleanBlast Tip | 1 | |
| FCLT-SN-BTW2-CF-MA | FCLT-SN-BTW2-CF-MA;Mating Adapter for FCLT-SN-CF to BTW2 CleanBlast Tip | 1 | |
| FCLT-SN-CF-MA | FCLT-SN-CF-MA;Mating Adapter for FCLT-SN-CF CleanBlast Tip | 1 | |
| FCLT-U12-MA | FCLT-U12-MA;Mating Adapter for FCLT-U12 CleanBlast Tip | 1 | |
| FCLT-U25-MA | FCLT-U25-MA;Mating Adapter for FCLT-U25 CleanBlast Tip | 1 | |
| FD/RT | FLAT ADAPTER FOR DIGITAL FORCE GAUGE | 1 | |
| FDS40-0215 | Honeywell CVR to Rack adapter cable | 4 | |
| FDS40-0247 | 2100RACK ADAPTER (ON-AIRCRAFT) | 4 | |
| FDS40-0274 | INETFACE ADAPTER CABLE | 3 | |
| FDS40-0332 | WIRELESS ADAPTER (DONGLE ONLY) | 1 | |
| FDS400-215 | HONEYWELL CVR TO RACK ADAPTER CABLE | 4 | |
| FDS400-232 | CABLE - ADAPTER HHMPI FOR HONEYWELL MODEL HRFS-D SSFDR | 6 | |
| FFL-050-U12 | FFL-050-U12;FFL-050-U12 Adapter 1.25mm for FFL-050 | 1 | |
| FFLX-01-A125 | AFL GLOBAL FOCIS FLEX 1.25MM/APC FERRULE ADAPTER TIP | 1 | |
| FFLX-01-A25 | AFL GLOBAL FOCIS FLEX 2.5MM/APC FERRULE ADAPTER TIP | 1 | |
| FITP-UPP12 | FITP-UPP12;FITP-UPP12 MP/HP2/HP3 OPM UPP Adapter 1.25mm | 1 | |
| FITP-UPP25 | FITP-UPP25;UPP Adapter for 2.5mm - SC-ST-FC | 1 | |
| FJC04-35-40000 | JACK ADAPTER ROLING TYPE | 1 | |
| FL5006-02-GB | PELTOR ADAPTER HEADSET PUSH TO TALK | 2 | |
| FLAP DRIVE ADAPTER | FLAP DRIVE ADAPTER TOOL | 1 | |
| FLUKE TL82 | AUTOMOTIVE PIN-AND-SOCKET ADAPTER KIT | 2 | |
| FMAG-AC951 | FMAG-AC951;Magnetic Adapter for AC951 Universal Clamshell | 1 | |
| FMAX-AC951 | FMAX-AC951;AC951 Universal Clamshell Microscope Adapter Female Threaded | 1 | |
| FMAX-AC951A | FMAX-AC951A;AC951 Universal Clamshell APC Microscope Adapter Female Threaded | 1 | |
| FMAX-CA1 | FMAX-CA1;Coupling Adapter Converts FMA Adapters to FMAX | 1 | |
| FMAX-COD | FMAX-COD;OptiTap Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-COD-MTA-P | FMAX-COD-MTA-P;OptiTip and HFMOC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-COD-TH | FMAX-COD-TH;OptiTap Top-Half Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-CS | FMAX-CS;CS Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-CS-APC | FMAX-CS-APC;CS/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-CS-APC-SL35 | FMAX-CS-APC-SL35;CS/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-CS-SL35 | FMAX-CS-SL35;CS Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-DLX | FMAX-DLX;DLX Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-E2A | FMAX-E2A;E2000/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-IP16-SN | FMAX-IP16-SN;IP-16 Plug Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC | FMAX-LC;LC/PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-2X | FMAX-LC-2X;LC/PC 2X Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-2X-MINI | FMAX-LC-2X-MINI;LC/PC 2X mini Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-2X-SL35 | FMAX-LC-2X-SL35;LC/PC 2X Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LC-DUX | FMAX-LC-DUX;LC/PC Duplex Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LC-DUX-SL35 | FMAX-LC-DUX-SL35;LC/PC Duplex Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LC-SL35 | FMAX-LC-SL35;LC/PC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LCA | FMAX-LCA;LC/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LCA-DUX | FMAX-LCA-DUX;LC/APC Duplex Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-LCA-DUX-SL35 | FMAX-LCA-DUX-SL35;LC/APC Duplex Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-LCA-SL35 | FMAX-LCA-SL35;LC/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-MDC | FMAX-MDC;MDC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MDC-APC | FMAX-MDC-APC;MDC/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MDC-APC-JR | FMAX-MDC-APC-JR;MDC/APC Jr Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MDC-APC-SL35 | FMAX-MDC-APC-SL35;MDC/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-MDC-SL35 | FMAX-MDC-SL35;MDC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-MMCA | FMAX-MMCA;MMC SM Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MT | FMAX-MT;MT/PC Ferrule Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTA | FMAX-MTA;MT/APC Ferrule Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTP | FMAX-MTP;MTP Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTPA | FMAX-MTPA;MTP/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-MTPA-1 | FMAX-MTPA-1;MTP/APC Advanced Fiber Microscope Adapter Female Threaded Keyless | 1 | |
| FMAX-SC | FMAX-SC;SC/PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SC-DUX | FMAX-SC-DUX;SC/PC Duplex Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SC-DUX-SL30 | FMAX-SC-DUX-SL30;SC/PC Duplex Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SC-SL30 | FMAX-SC-SL30;SC/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SC2 | FMAX-SC2;SC2/PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SC2-SL30 | FMAX-SC2-SL30;SC2/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SCA | FMAX-SCA;SC/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SCA-SL30 | FMAX-SCA-SL30;SC/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SCA-SL41 | FMAX-SCA-SL41;SC/APC Adv Fiber Microscope Adapter Female 41-Degree Chamfer | 1 | |
| FMAX-SCA2 | FMAX-SCA2;SC2/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SCA2-SL30 | FMAX-SCA2-SL30;SC2/PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-SCA2-SL41 | FMAX-SCA2-SL41;SC2/APC Adv Fiber Microscope Adapter Female 41-Degree Chamfer | 1 | |
| FMAX-SN | FMAX-SN;SN Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-APC | FMAX-SN-APC;SN/APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-APC-SL35 | FMAX-SN-APC-SL35;SN/APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-SN-BTW1 | FMAX-SN-BTW1;SN-BTW1 Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-BTW1-SL35 | FMAX-SN-BTW1-SL35;SN-BTW1 Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-SN-BTW2 | FMAX-SN-BTW2;SN-BTW2 Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-SN-BTW2-SL35 | FMAX-SN-BTW2-SL35;SN-BTW2 Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-SN-MTA | FMAX-SN-MTA;Universal SN-MTA Microscope Adapter Female | 1 | |
| FMAX-SN-SL35 | FMAX-SN-SL35;SN Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-TMTA | FMAX-TMTA;TMT/APC Advanced Fiber Microscope Adapter Female Threaded Keyless | 1 | |
| FMAX-U12 | FMAX-U12;Universal 1.25mm PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U12-SL35 | FMAX-U12-SL35;Universal 1.25mm PC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-U12A | FMAX-U12A;Universal 1.25mm APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U12A-SL35 | FMAX-U12A-SL35;Universal 1.25mm APC Adv Fiber Microscope Adapter Female 35-Degree Chamfer | 1 | |
| FMAX-U25 | FMAX-U25;Universal 2.5mm PC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U25-SL30 | FMAX-U25-SL30;Universal 2.5mm PC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-U25A | FMAX-U25A;Universal 2.5mm APC Advanced Fiber Microscope Adapter Female Threaded | 1 | |
| FMAX-U25A-SL30 | FMAX-U25A-SL30;Universal 2.5mm APC Adv Fiber Microscope Adapter Female 30-Degree Chamfer | 1 | |
| FMAX-U25A-SL41 | FMAX-U25A-SL41;Universal 2.5mm APC Adv Fiber Microscope Adapter Female 41-Degree Chamfer | 1 | |
| FMF03-35-41000 | TOWING ADAPTER MLG | 1 | |
| FNC/833-020 | UNIVERSAL ADAPTER MIDDLE LINKS ASSEMBLY | 1 | |
| FRDH101 | WRENCH ADAPTER 5/16",",1" | 3 | |
| FRDH141 | TORQUE ADAPTER 7/16, DRIVE 3/8 | 12 | |
| FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
| FRDH201 | TORQUE RIBBED ADAPTER 3/8" X 5/8" | 1 | |
| FRDH221 | TORQUE RIBBED ADAPTER 3/8" X 11/16" | 2 | |
| FRDH241 | TORQUE RIBBED ADAPTER 3/8" X 3/4" | 1 | |
| FRES10 | 3/8"DRIVE-5/16" TORQUE ADAPTER 2 EA | 4 | |
| FRES12 | 3/8"DRIVE-3/8" TORQUE ADAPTER 2 EA | 6 | |
| FRES14 | TORQ ADAPTER 716 | 6 | |
| FRESL20 | 5/8IN TORQUE ADAPTER 3/8IN DR | 1 | |
| FS0005 | Oil Inlet and Outlet Adapter | 1 | |
| FS0006 | Oil Temperature Sensor Adapter | 1 | |
| FST 8040 | H-60 FUEL CONTROL ADAPTER SET | 1 | |
| FST8168 | P-8 FUEL CONTROL ADAPTER SET / MFC: 50027 | 1 | |
| FTGCD4202 | STATIC ADAPTER FOR PN DMAK-A320X-E1K0P0V3 | 1 | |
| FTI-MB/LB-A1 | Puller Unit: MB-XX Mandrel Adapter - Allows LB Mandrel and Nosecap to attach to MB Puller Unit | 1 | |
| FUEL FEED LINE HOSE ADAPTER MD | FUEL FEED LINE HOSE ADAPTER MD | 1 | |
| FUEL-INHIB-ADAPT-CF6 | CF6 FUEL INHIBITING ADAPTER TOOL | 1 | |
| FX237106-P03 | CRADLE ADAPTER (TOOL) | 1 | |
| FXT-13305 | INTERFACE TEST ADAPTER (ITA) (FXT-13305) | 1 | |
| FXT-16967 | Fuel Adapter Fitting | 1 | |
| FZ13 | NITROGEN ADAPTER | 6 | |
| G07009-1 | JACKING ADAPTER RECOVERY EQUIPMENT - AFT INBOARD AND OUTBOARD DIAGONAL BRACE | 1 | |
| G1003210001-001 | SERVICING ADAPTER NLG | 4 | |
| G1003243031-001 | BRAKE PEDAL ADAPTER KIT | 1 | |
| G1003521040-001 | ALTITUDE SIMULATOR TOOL ADAPTER ASSY | 3 | |
| G1008011029-001 | AIR START ADAPTER GSE | 1 | |
| G13 | CORDED PRODUCT ADAPTER (19070/19050/19032x) | 1 | |
| G21008-1 | ADAPTER EQUIPMENT - AIR CYCLE MACHINE (CE) | 2 | |
| G215-070019-1 | JACK ADAPTER KIT | 1 | |
| G24012 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 2 | |
| G24012-1 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (CE) | 11 | |
| G24012-2 | Hoist Adapter Assembly | 2 | |
| G24013-1 | ACCESSORY ADAPTER - HOIST SYSTEM RB211 AND CF6-50 ENGINES | 1 | |
| G26001-163 | CABLE ADAPTER FIRE X | 4 | |
| G26001-165 | CABLE ADAPTER FIRE X | 4 | |
| G26001-166 | CABLE ADAPTER FIRE X | 6 | |
| G26001-167 | CABLE ADAPTER FIRE X | 3 | |
| G26001-168 | CABLE ADAPTER FIRE X | 2 | |
| G26001-69 | SPL-11604 ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM | 2 | |
| G26001-71 | CABLE ASSY ADAPTER FOR G26001-105 | 3 | |
| G26005-19 | Nozzle adapter assy | 1 | |
| G26005-24 | SPL-1646 ADAPTER - HOT WIRE ANEMOMETER | 11 | |
| G26006-63 | Tube adapter assy | 1 | |
| G26009-91 | 1-1/4"TUBE ADAPTER ASSY | 1 | |
| G26009-92 | 3/4"TUBE ADAPTER ASSY | 1 | |
| G26009-93 | 1"TUBE ADAPTER ASSY | 1 | |
| G27011 | SPLINE ADAPTER -0 TORQUE SENSOR, INBD & OUTBD TE | 1 | |
| G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| G27020 | SPLINE ADAPTER -0 OUTBD XMSN, INBD T.E. FLAP | 1 | |
| G27020-1 | SPLINE ADAPTER - OUTBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27030 | TORQUE ADAPTER -0 HORIZONTAL STABILIZER ACTUATOR | 1 | |
| G27030-1 | TORQUE ADAPTER - HORIZONTAL STABILIZER ACTUATOR | 9 | |
| G27033-2 | CABLE 767 ADAPTER O/B AILERON | 6 | |
| G27034 | SPLINE ADAPTER -0 ANGLE GEARBOX DRIVE, INBD TE | 1 | |
| G27034-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 2 | |
| G27046-3 | Wide adapter assy | 1 | |
| G27046-4 | Medium adapter assy | 1 | |
| G27046-5 | Narrow adapter assy | 1 | |
| G27046-6 | Short adapter assy | 1 | |
| G27056-1 | HOIST ADAPTER - POWER DRIVE UNIT, OUTBOARD TRAILING EDGE FLAP (CE) | 3 | |
| G27082-1 | Torque Adapter - Flap Track Installation | 1 | |
| G27082-12 | TORQUE ADAPTER - FLAP TRACK INSTALLATION | 2 | |
| G27090-1 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 2 | |
| G27090-54 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 1 | |
| G27091-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD T.E. FLAP (G27091-3 ASSY INCLUDED IN G27091-1) | 5 | |
| G27094-4 | SPLINE ADAPTER - SUPPORT ASSY, TORQUE TUBE | 1 | |
| G28008 | TEST ADAPTER EQPT -0 FUEL LINE PRESSURE | 1 | |
| G28008-1 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | 1 | |
| G28008-2 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | 1 | |
| G28008-4 | Test Adapter Assy - Fuel Line Pressure | 1 | |
| G28009-25 | 3/8" adapter assy | 1 | |
| G28014-15 | FUEL SUMP DRAIN - ADAPTER EQUIPMENT | 3 | |
| G29001 | TEST ADAPTER -0 PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29001-1 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29001-2 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | |
| G29014-1 | RETURN & PRESSURE EXTENSION ADAPTER - GROUND SERVICE DISCONNECT | 8 | |
| G29014-2 | Return Adapter Assy | 3 | |
| G29014-3 | Pressure Adapter Assy | 1 | |
| G32011 | WRENCH ADAPTER -0 OVERSIZE GLAND NUT, WING, AND | 1 | |
| G32011-1 | WRENCH ADAPTER - OVERSIZE GLAND NUT, WING AND BODY GEAR | 6 | |
| G32011-2 | Wrench adapter assy | 1 | |
| G32021-19 | Gage Adapter | 1 | |
| G32037 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 1 | |
| G35005-11 | LARGE MID ADAPTER ASSY | 1 | |
| G35005-62 | 727 FWD ADAPTER ASSY | 1 | |
| G35005-63 | 727 AFT ADAPTER ASSY | 1 | |
| G35005-7 | MID ADAPTER ASSY | 1 | |
| G35005-89 | FWD ADAPTER ASSY | 1 | |
| G35005-91 | AFT ADAPTER PANEL | 1 | |
| G38005-11 | Large mid adapter assy | 1 | |
| G38005-3 | MID DOOR ADAPTER EQPT | 1 | |
| G38005-91 | Aft Adapter Panel | 1 | |
| G38005-93 | FWD ADAPTER FRAME | 1 | |
| G38005-95 | AFT ADAPTER FRAME | 1 | |
| G38006-2 | HOSE ADAPTER ASSY | 1 | |
| G52015-19 | Latch adapter fitting | 1 | |
| G54008-50 | Torque adapter assy | 1 | |
| G5M5M0-116-0000 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 1 | |
| G600-120001-1 | NITROGEN CHARGING ADAPTER KIT (GSE 12-30-01). | 5 | |
| G600-120005-1 | KIT, HYDRAULIC LINE ADAPTER KIT(Aeroquip | 5 | |
| G600-120005-1 | KIT, HYDRAULIC LINE ADAPTER KIT | 5 | |
| G600-210002-25 | PRESSURE CAP ADAPTER PLATE | 1 | |
| G600-524101-1 | TORQUE WRENCH ADAPTER EQUIPMENT BAY DOOR HANDLE | 1 | |
| G600−524101−1 | Torque Wrench Adapter − Equipment Bay Door Handle | 1 | |
| G601-710008-157 | SLING, ENGINE/POWER PLANT (INCLUDES ADAPTER 932?200) | 5 | |
| G601R121611 | Kit − Nitrogen Charging Adapter (Optional) | 1 | |
| G601R121801-29 | KIT, ADAPTER POTABLE WATER SUPPLY | 5 | |
| G601R121801-29 | KIT, ADAPTER POTABLE WATER SUPP | 5 | |
| G601R282601-1 | DEFUEL ADAPTER ASSY | 5 | |
| G601R291004-1 | SAMPLING ADAPTER KIT | 5 | |
| G601R321102-1 | WRENCH ADAPTER - MLG PINTLE PIN NUT | 6 | |
| G601R321102−1 | Wrench Adapter − MLG Pintle Pin Nut | 6 | |
| G601R361201-1 | KIT - INLET ADAPTER 14TH STAGE | 1 | |
| G601R361201−1 | Kit − Inlet Adapter 14th Stage | 1 | |
| G601R361301-1 | AIR ADAPTER KIT | 2 | |
| G601R381001−1 | Potable Water Adapter − Pre− Cooler | 4 | |
| G601R521104-1 | Torque Adapter - Passenger And Baggage Door Handle | 7 | |
| G601R521118-1 | External Handle Adapter - Passenger Door | 4 | |
| G601R522201-1 | TORQUE ADAPTER - PILOT HATCH HANDLE INSIDE | 4 | |
| G601R522201−1 | Torque Adapter − Crew Escape Handle Inside | 4 | |
| G601R522202-1 | Torque Adapter - Pilot?S Hatch Handle (Outside) | 6 | |
| G601R522202−1 | Torque Adapter − Crew Escape Handle Outside | 6 | |
| G601R760002-9 | GAUGE, ADAPTER ASSY | 1 | |
| G700050127 | G700050127;OneAdvisor-800 AC/DC Power Adapter 160 W 19 V | 1 | |
| G71002-34 | FWD ADAPTER ASSY | 1 | |
| G71009-149 | RR trent adapter head | 1 | |
| G71009-88 | PW4084 FWD adapter head | 1 | |
| G71039-1 | Proof Load Fixture Adapter -Bootstrap Equipment | 1 | |
| G71039-44 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 1 | |
| G78005-10 | 767 ADAPTER | 9 | |
| GAF2A | INDL ADAPTER 38 X 12 SNAPON | 3 | |
| GB751204 | 751204, GAGE BILT TOOL PART, ADAPTER ASSEMBLY | 2 | |
| GE-FQAP-302 | HIGH SPEED EDDY CURRENT FIXTURE AND PROBE ADAPTER FOR ROHMANN HIGH SPEED ROTOR (HF AND STD. MODELS) | 2 | |
| GE-FQAP-302A | HIGH SPEED EDDY CURRENT FIXTURE AND PROBE ADAPTER FOR STAVELEY HIGH SPEED ROTOR (RA 19 MODEL) | 1 | |
| GETC764434 | GB ADAPTER COMPR. BO | 1 | |
| GFAT1E | DRIVE ADAPTER 3/8'' TO 1/4'' | 4 | |
| GFG342 | WRENCH ADAPTER TOOL | 1 | |
| GFG351 | DRAIN ADAPTER MEASUREMENT UNIT | 1 | |
| GFG352 | CBP SENSE LINE LEAK CHECK ADAPTER | 1 | |
| GFG593 | PITOT STATIC ADAPTER | 1 | |
| GFG595 | PITOT STATIC ADAPTER | 1 | |
| GG0570003-003 | PADS-JACKING, ADAPTER ASSY WING/FUSE | 1 | |
| GLAS1F2 | REPLACEMENT ADAPTER (1/2"SQUARE BIT) | 1 | |
| GMB3042 | SOCKET ADAPTER 1/4"X 1/4" 50MM | 2 | |
| GMB3042T | 1/4 BIT ADAPTER TOOL | 1 | |
| GMGJAK | ALBERTH AVIATION MAIN GEAR JACK ADAPTER KIT PN: GMGJAK | 1 | |
| GMI80-4711 | ENGINE GROUND START ADAPTER | 1 | |
| GNSSRK | REPEATER KIT; INCLUDES GA30-V AMPLIFIER MODULE, S440 GNSS ANTENNA, N-JK-G ARRESTER, GRA10-NF INDOOR ANTENNA, LMR/KSR240 L=20MTR (NM-NM) INDOOR CABLE SET, RG8 L=30MTR (NM-TM) OUTDOOR CABLE SET, OUTDOOR ANTENNA MOUNTING STAND AND POWER ADAPTER MANUFACTURER: | 1 | |
| GR000092 | Torque Spanner Adapter | 1 | |
| GS13215-1 | Torgue Adapter | 2 | |
| GS15047-1 | PRV ADAPTER TEST PRESSURE RELIEF | 15 | |
| GS16176-1 | VALVE ADAPTER VTS | 1 | |
| GS18298-1 | WITH GS18300-1 ADAPTER KIT DURING PROPELLER BALANCING | 6 | |
| GS18299 | BALANCE ADAPTER KIT | 1 | |
| GS18299-1 | BALANCE ADAPTER KIT | 2 | |
| GS18300 | BALANCE ADAPTER KIT | 2 | |
| GS18300-1 | BALANCE ADAPTER KIT | 1 | |
| GS19818-1 | TORQUE ADAPTER KIT | 5 | |
| GS19822-1 | TORQUE ADAPTER KIT | 2 | |
| GS20782-1 | TORQUE ADAPTER FOR PROPELLER HU | 12 | |
| GS20782-1. | TORQUE ADAPTER PROPELLER | 12 | |
| GS20836-1 | INLET ADAPTER ASSY(HIGH PRESSURE) | 1 | |
| GS20837 | INLET ADAPTER ASSY | 1 | |
| GS20864-1 | BLADE ANGEL MEASURING ADAPTER | 3 | |
| GS20952-1 | OUTLET ADAPTER ASSY | 2 | |
| GS20965-1 | TOOL PROP MOUNT ADAPTER PLATE | 7 | |
| GS20966-1 | PROP MOUNT ADAPTER PLATE | 2 | |
| GS21368-1 | ASSY, ADAPTER PLATE | 1 | |
| GS21413 | HEIGHT ADAPTER KIT | 1 | |
| GS21413-1 | BENCH HEIGHT ADAPTER KIT | 1 | |
| GS22526-1 | Torque Adapter | 2 | |
| GS23608 | TIE ROD NUT ADAPTER TOOL | 1 | |
| GS23608-1 | TIE ROD NUT ADAPTER TOOL | 1 | |
| GS26802-1 | TORQUE ADAPTER - BALANCE NUT | 2 | |
| GSB2750003 | DRIVE ADAPTER FLAP | 1 | |
| GSB2840008A | HARNESS ADAPTER FOR Q400 | 1 | |
| GSB2840008B | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, EXTENDED RANGE | 1 | |
| GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
| GSB2840008D | SET - HARNESS ADAPTER Q100, 200, 300, IMPERIAL, EXTENDED RANGE | 1 | |
| GSB3021001 | INTAKE ADAPTER HEATER TEST BOX | 2 | |
| GSB3251005 | KIT ADAPTER NLG PROTRACTOR | 3 | |
| GSB3411009 | PITOT STATIC ADAPTER SET | 3 | |
| GSB3411012 | PITOT/STATIC PRESSURE TEST ADAPTER KIT (OR EQUIVALENT) | 1 | |
| GSB3411013 | PITOT/STATIC PRESSURE TEST ADAPTER KIT | 1 | |
| GSB6110003 | TORQUE ADAPTER − PROPELLER | 2 | |
| GSE 105 | MLG ADAPTER HOIST | 3 | |
| GSE158 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 1 | |
| GSE234 | SPLINE ADAPTER - TORQUE TUBE | 1 | |
| GSE261 | FWD SUPPORT ADAPTER P/N 23066566 | 1 | |
| GSE2720570 | SPLINED FLAP DRIVE ADAPTER KIT | 1 | |
| GSE3400846 | PITOT / STATIC PROBE ADAPTER AND HOSE KIT | 1 | |
| GSE3420768 | USB429WIN ARINC 429 ADAPTER KIT | 1 | |
| GSE4900494 | SPLINE ADAPTER REMOVAL TOO | 1 | |
| GSE4900495 | ALTERNATE: SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| GSE4920821 | SPLINE ADAPTER INSTALLATION TOOL | 1 | |
| GSE5120528 | VSV TORQUE ADAPTER / BAVPIN KIT | 1 | |
| GSE7100072 | REAR ADAPTER FOR ENGINE DRESSING / PARKING STAND | 1 | |
| GSE7120398 | LIFTING SLING REAR ADAPTER ASSEMBLY (THREE PARTS) | 1 | |
| GSE7120399 | LIFTING SLING FRONT ADAPTER ASSEMBLY (TWO PARTS) | 1 | |
| GSE7120404 | TRANSPORTATION STAND REAR ADAPTER (LEFT LOWER LUG) | 1 | |
| GSE7120405 | TRANSPORTATION STAND REAR ADAPTER (RIGHT LOWER LUG) | 1 | |
| GSE7120407 | TRANSPORTATION STAND FRONT ADAPTER (TRUNNION) | 1 | |
| GSE7120408 | TRANSPORTATION STAND FRONT ADAPTER (LOWER LUG) | 1 | |
| GSE7220780 | VSV TORQUE ADAPTER / BAV- PIN KIT | 1 | |
| GTA3 | SQUARE DRIVE ADAPTER 1/4@3/8 | 2 | |
| GTP-8963 | Fueling adapter wear check tool | 1 | |
| GUC232A | USB ADAPTER TO SERIES RS-232 | 1 | |
| GWKT-610C | GREASE GUN ADAPTER OR ADAPTER KIT | 1 | |
| H-06450-86 | PIPE ADAPTER FITTING | 1 | |
| H-30702-26 | PIPE ADAPTER FITTING | 1 | |
| H150E-4000-3 | HYD. HOSE & ADAPTER INST'N | 1 | |
| H21969 | ATR / ADAPTER JACK | 11 | |
| H294 | TESTER - THERMO SWITCH, K-TYPE THERMOCOUPLE SWITCHES TESTER - THERMO SWITCH, THERMOCOUPLE AND THERMAL SWITCHES (NOT "CE" CERTIFIED) TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SWITCH | 3 | |
| H394 | TEMPCAL TESTER WITH ADAPTER CABLE BH405 | 1 | |
| H394-115 | TEMPCAL TESTER WITH ADAPTER CABLE BH405 | 2 | |
| H394R | TEMPCAL TESTER WITH ADAPTER CABLE BH405 | 8 | |
| H46828 | SPE ADAPTER NLG WHL AXLE NUT | 19 | |
| H46831 | NLG ADAPTER NUT | 11 | |
| H46838 | MLG ADAPTER ATR TOOl | 14 | |
| H47026 | NLG CHARGE ADAPTER - HAND LEVER | 4 | |
| H47682 | TORQUE ADAPTER AXLE NUT A320 | 43 | |
| HC130H0071-000 | TORQUE ADAPTER - PYLON FRONT BOLTS | 1 | |
| HC1321H0071-000 | SLING ADAPTER MAIN GEAR | 1 | |
| HC132H0060-000 | JACKING ADAPTER N/W | 3 | |
| HC132H0071-000 | SLING ADAPTER MAIN GEAR | 5 | |
| HCU200-AC-ADPTR-BRICK | HCU200-AC-ADPTR-BRICK;OPT HCU200 AC POWER ADAPTER BRICK FORM | 1 | |
| HE50844Z53 | KEY - ADAPTER BAR | 1 | |
| HGPU50-30-1S | HYDRAULIC GROUND POWER UNIT WITH : -OPTION- H; - OPTION-S; -ACCESSORY- 04 ; - ADAPTER HOSE KIT-B737 CLASSIC. | 2 | |
| HJ9B 80080- | PMAT 2000 ARINC 615A LOAD TO RJ45 ADAPTER KIT CABLE (6FT) | 1 | |
| HJ9B P/N 80080-1 | PMAT 2000 ARINC 615A LOAD TO RJ45 ADAPTER KIT CABLE (6FT) | 1 | |
| HLA1630 | Pressure Gauge Adapter Up to 600bar | 1 | |
| HLA1630-T | Pressure Gauge Adapter Up to 250bar | 1 | |
| HLA1645 | NATO M Adapter - BNAE DN8 F | 1 | |
| HLA1646 | NATO F Adapter - BNAE DN8 M | 1 | |
| HLA4301 | BNAE DN8 M Adapter - AN-4 M | 1 | |
| HLA4302 | NATO M Adapter - MS33514-4 M | 1 | |
| HLA4303 | NATO M Adapter - AN4 M | 1 | |
| HLA4304 | BNAE DN8 M Adapter - Type C | 1 | |
| HLA4305 | NATO F Adapter - AN4 M | 1 | |
| HLA4677 | Pump Adapter G3/8" M - BNAE DN8 M | 1 | |
| HLA4919 | Puncture Adapter 90° | 1 | |
| HLA4992 | Puncture Adapter 120° | 1 | |
| HLA5177 | BNAE DN8 M Adapter - MS33514-4 M | 1 | |
| HLA5943 | Internal Stock Adapter TRP | 1 | |
| HLA6166 | NATO F Adapter - 1/8" NPT M | 1 | |
| HLA6189 | 90° Puncture Adapter AN4X NATO | 1 | |
| HLA6189-OBT | 90° Puncture Adapter AN4X NATO + Plugs | 1 | |
| HLA6235 | Mini Puncture Adapter 90° | 1 | |
| HLA6235A120 | Mini Puncture Adapter 120° | 1 | |
| HLA6274 | NATO F Adapter - G1/4" M | 1 | |
| HLA6275 | NATO M Adapter - G1/4" M CYL | 1 | |
| HLA6413-3/3 | Elbow Adapter for Bleeding Boeing Brakes AN4 M - 3/16-32BSF | 1 | |
| HLA6423-GD | Mini Puncture Adapter 90° High Flow | 1 | |
| HLA6423-GDA120 | Mini Puncture Adapter 120° High Flow | 1 | |
| HLA6423-PD | Mini Puncture Adapter 90° NATO Inlet High Flow Outlet | 1 | |
| HLA6423-PDA120 | Mini Puncture Adapter 120° NATO Inlet High Flow Outlet | 1 | |
| HLA6425 | 90° Puncture Adapter High Flow | 1 | |
| HLA6427 | 90° Puncture Adapter NATO Inlet High Flow Outlet | 1 | |
| HLA6430 | 120° Puncture Adapter High Flow | 1 | |
| HLA6458 | Straight Adapter for Bleeding Boeing Brakes AN4 M - 3/16-32BSF | 1 | |
| HLA6570 | Orientable Adapter for Bleeding Airbus Brakes | 1 | |
| HLA6574 | Torque Adapter ARRIEL | 1 | |
| HLA6575 | Torque Adapter ALLISON | 1 | |
| HLA6585 | Straight Adapter for Bleeding NATO Brakes M - 3/16-32BSF | 1 | |
| HLA6652B | PURGE ADAPTER Ø12 | 1 | |
| HOV917411 | REGULATER & ADAPTER OXY CHARGE | 1 | |
| HP-6000-1 | H150 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
| HP-6000-10 | H150 LIFT ADAPTER - B47 - STD GEAR | 1 | |
| HP-6000-11 | H250 LIFT ADAPTER - B204/AH-1 | 1 | |
| HP-6000-12 | H200/250 LIFT ADAPTER - H135/EC135 - LOW GEAR | 1 | |
| HP-6000-13 | H200/250 LIFT ADAPTER - H135/EC135 - HIGH GEAR | 1 | |
| HP-6000-14 | H150 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
| HP-6000-15 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR | 1 | |
| HP-6000-16 | H250 LIFT ADAPTER - MD900 | 1 | |
| HP-6000-17 | H200/250 LIFT ADAPTER - B427 - LOW GEAR W/O CABLE CUTTERS | 1 | |
| HP-6000-18 | H200/250 LIFT ADAPTER - B427 - HIGH GEAR | 1 | |
| HP-6000-19 | H200/250 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
| HP-6000-2 | H150 LIFT ADAPTER - B206A/B - LOW GEAR | 1 | |
| HP-6000-20 | H250 LIFT ADAPTER - B430 | 1 | |
| HP-6000-21 | H150 LIFT ADAPTER - H125/AS350 - HIGH GEAR | 1 | |
| HP-6000-22 | H150 LIFT ADAPTER - H125/AS350 - LOW GEAR | 1 | |
| HP-6000-24 | H250 LIFT ADAPTER - BO105 | 1 | |
| HP-6000-25 | H250 LIFT ADAPTER - BK117 | 1 | |
| HP-6000-26 | H200/250 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
| HP-6000-27 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - LOW GEAR | 1 | |
| HP-6000-28 | H150/200/250 LIFT ADAPTER - OH-58 - HIGH GEAR | 1 | |
| HP-6000-29 | H150 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
| HP-6000-3 | H150/200/250 LIFT ADAPTER - B206L - FLOAT COMP. | 1 | |
| HP-6000-31 | H200/250 LIFT ADAPTER - H120/EC120 | 1 | |
| HP-6000-32 | LIFT ADAPTER R-44 | 1 | |
| HP-6000-33 | LIFT ADAPTER R-22, H100 | 1 | |
| HP-6000-34 | LIFT ADAPTER SAC 269 STND | 1 | |
| HP-6000-36 | H150 LIFT ADAPTER - OH-58 - LOW GEAR | 1 | |
| HP-6000-37 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - HIGH GEAR | 1 | |
| HP-6000-38 | LIFT ADAPTER R-22 | 1 | |
| HP-6000-39 | H150 LIFT ADAPTER - AIRPLANE MOD. | 1 | |
| HP-6000-4 | H150 LIFT ADAPTER - B206B - FLOAT COMP. | 1 | |
| HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
| HP-6000-41 | H250 LIFT ADAPTER - UH-1H - LOW GEAR | 1 | |
| HP-6000-42 | H250 LIFT ADAPTER - AW119 | 1 | |
| HP-6000-44 | H250 LIFT ADAPTER - UH-1H - HIGH GEAR | 1 | |
| HP-6000-46 | LIFT ADAPTER KIT, R22, | 1 | |
| HP-6000-47 | H250 LIFT ADAPTER - H145/EC145 | 1 | |
| HP-6000-48 | H200/250 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
| HP-6000-49 | H150 LIFT ADAPTER - ENSTROM F-28 | 1 | |
| HP-6000-50 | H150 LIFT ADAPTER - ENSTROM F-480 | 1 | |
| HP-6000-56 | H250 LIFT ADAPTER - AH-1 | 1 | |
| HP-6000-58D | H200 LIFT ADAPTER - OH-58D - HIGH GEAR | 1 | |
| HP-6000-6 | LIFT ADAPTER 350 HIGH | 1 | |
| HP-6000-61 | H150 LIFT ADAPTER - B47 - HIGH GEAR | 1 | |
| HP-6000-62 | H200/250 LIFT ADAPTER - H135/EC135 - MID GEAR (METRO) | 1 | |
| HP-6000-63 | H250 LIFT ADAPTER - UH-72 LAKOTA | 1 | |
| HP-6000-68 | H200/250 LIFT ADAPTER - B206B - FLOAT COMP. | 1 | |
| HP-6000-69 | H150 LIFT ADAPTER - SCHWEIZER S269/300 | 1 | |
| HP-6000-7 | H250 LIFT ADAPTER - B222/230 | 1 | |
| HP-6000-70 | H150 LIFT ADAPTER - R22 | 1 | |
| HP-6000-71 | H150 LIFT ADAPTER - R44 | 1 | |
| HP-6000-72 | LIFT ADAPTER MQ-8C | 1 | |
| HP-6000-74 | H200/250 LIFT ADAPTER - H130/EC130 | 1 | |
| HP-6000-75 | H150 LIFT ADAPTER - B505 - STD GEAR | 1 | |
| HP-6000-78 | H150 LIFT ADAPTER - B505 - HIGH GEAR | 1 | |
| HP-6000-79 | LIFT ADAPTER INSTALLATION | 1 | |
| HP-6000-8 | H250 LIFT ADAPTER - B212/412 | 1 | |
| HP-6050-15 | STOP ADAPTER ASSY | 1 | |
| HP-6095-10 | LIFT ADAPTER ASSY | 1 | |
| HP-6095-3 | LIFT ADAPTER ASSY | 1 | |
| HP-6095-4 | LIFT ADAPTER ASSY | 1 | |
| HPX421B | DETECTOR KIT CRYSTAL WITH FRONT END ADAPTER PN: 8817A OR EQUIVALENT | 1 | |
| HS125-700/800 | ITT INDICATOR ADAPTER CABLE | 1 | |
| HS9991-4 | FLARE TO FLARELESS ADAPTER (3 REQUIRED) | 1 | |
| HSE757-0010-7 | SLING WINGLET - ADAPTER PLUG HOIST | 2 | |
| HT-500-CWA-F-3 | COMPRESSOR WASH FITTINGS ADAPTER (AW139) | 1 | |
| HT422285 | NITROGEN ADAPTER VALVE | 1 | |
| HTAH-B737 | B737 Adapter Hose for Hyrd Test Stand | 1 | |
| HTE900135-TA | TEST ADAPTER (7 IT) | 1 | |
| HU-5 | ENGINE STAND ADAPTER - RB211 | 1 | |
| HU29225/1 | TURNOVER ADAPTER HP COMP ROTOR | 1 | |
| HU29238 | Lifting adapter (alternative to HU28783/2) (Use HU28783 & CP30042 togather) | 1 | |
| HU37863 | EXTRACTOR ADAPTER (ESS) | 1 | |
| HU55007 | RIGHT ADAPTER FOR RB211 STANDS | 1 | |
| HU55181-1 | SPRUNG ADAPTER RI EXTERNAL GEARBOX MODULE | 7 | |
| HU55183 | PLATE, ADAPTER - R I PNEUMATIC STARTER | 1 | |
| HU55218-2 | TURNOVER ADAPTER (ALTERNATIVE) | 3 | |
| HU55436-2 | IDG TROLLEY ADAPTER HEAD | 11 | |
| HU55736-1 | ADAPTER ADAPTER -0 TROLLEY,REM. INST. | 3 | |
| HU55989 | PLATE ADAPTER - R I GEARBOX UNITS | 5 | |
| HU56211-5 | ADAPTER ADAPTER GEARBOX CRADLE TO JACK | 1 | |
| HU80277 | ADAPTER ADAPTER - ENGINE FUEL | 7 | |
| HU87542 | TORQUE ADAPTER TOOL | 1 | |
| HW300 | MANUAL INSTALLATION KIT ZEPHYR (HW300 TORQUE ADAPTER AND HEAD) | 1 | |
| HWD-40-F | Hydraulic Wheel Dolly with Adapter Kit for 7X | 2 | |
| I-0001 | Deflation Adapter Pneumatic System | 1 | |
| IA3202-1 | BRAKE ADAPTER ASSEMBLY | 1 | |
| IAE1F10041 | AFT ADAPTER SLING | 8 | |
| IAE1J12000 | Engine Attach Adapter - Lifting Bracket | 10 | |
| IAE1J12007 | FWD ADAPTER SLING | 10 | |
| IAE1J12119 | IGB ADAPTER A1/A5 | 1 | |
| IAE1J12519 | ADAPTER ADAPTER REMOVAL | 2 | |
| IAE1N20023 | TORQUE ADAPTER TOOL | 17 | |
| IAE1N20036 | TORQUE ADAPTER TOOL | 1 | |
| IAE1N20054 | TORQUE ADAPTER T/REV BLOW OUT DOOR | 4 | |
| IAE1R18685 C | ENGINE PRESERVATION ADAPTER V2500 | 1 | |
| IAE2P16602 | TEST ADAPTER (2IT) | 1 | |
| IAE4P16228 | GSE ADAPTER HOSE | 4 | |
| IAS-2300-01 | DRAIN-FILL NOZZLE ADAPTER ASSY | 1 | |
| ICO 92.40.00.05.470 | SE ADAPTER CASE. AS 332 | 1 | |
| IDG STARTER ADPT | IDG FILLER ADAPTER TOOL | 1 | |
| IDL61-560 | CIRCUIT ID ADAPTER SET | 1 | |
| IE-20B | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 1 | |
| IPEH-002021-QM | CAN-USB ADAPTER QM | 1 | |
| IPEH-002022 | CAN INTERFACE ADAPTER FOR USB | 2 | |
| IRT1360 | JACKING ADAPTER KIT | 1 | |
| IS1000118M9922-12 | MAINS MULTI-PLUG ADAPTER PACE 1000 | 1 | |
| IT-1776 | PULLEY ADAPTER SPECIAL TOOLS | 1 | |
| IV10435 IPLEX | TIP ADAPTER DIA. 4 MM. LENGTH 3 M. | 1 | |
| IV86 | OPTICAL ADAPTER SET (SET OF 10) | 1 | |
| IV86-AT80S | OPTICAL ADAPTER TIP | 1 | |
| IV9435GX/GT | TIP ADAPTER DIA.4 MM. LENGTH 3.5 M. | 1 | |
| IV94G-AT120D/FF | IPLEX TIP ADAPTER 4MM 120 DEGREE | 1 | |
| J 27076-6 | PRESSURE SWITCH ADAPTER ASSY NLG | 8 | |
| J-BA-1 | BRAKE SUPPORT ADAPTER FOR 227A-JMS | 1 | |
| J-GGA | GREASE GUN ADAPTER SET | 1 | |
| J12007-1 | NLG STRUT ADAPTER 777 | 6 | |
| J20001-62 | HOIST ADAPTER FOR LRU IN MAIN EE BAY | 6 | |
| J20001-63 | HOIST ADAPTER FOR LRU IN MAIN EE BAY | 5 | |
| J20009-136 | TELESCOPING HYD. ADAPTER ASSY. | 9 | |
| J20009-140 | CRADLE ADAPTER - JACKING EQPT, HYDRAULIC TELESCOPING - 757/767 | 2 | |
| J20009-50 | SPL-13997 ADAPTER - LOAD POSITIONER | 13 | |
| J20009-64 | Jacking Adapter Assy | 4 | |
| J20009-68 | JACKING ADAPTER ASSY | 15 | |
| J20009-70 | CRADLE ADAPTER - JACKING EQPT, HYDRAULIC TELESCOPING - 757/767 | 7 | |
| J20009-88 | Cradle Adapter - Jacking Eqpt | 9 | |
| J20011-1 | INTERFACE ADAPTER - GE FLOOR HOIST, LRU | 7 | |
| J21001 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-132 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 8 | |
| J21001-133 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-134 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-136 | HX Adapter Assembly | 3 | |
| J21001-137 | C/R ADAPTER ASSY | 3 | |
| J21001-138 | ACM ADAPTER ASSY | 4 | |
| J21001-153 | HEAT EXCHANGER ADAPTER ASSY, J21001-74, -82, -136, OR -157 (INCLUDED IN J21001 EQPT) | 1 | |
| J21001-154 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 6 | |
| J21001-155 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 4 | |
| J21001-156 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 4 | |
| J21001-181 | Jacking/Hoist Adapter Eqpt - Air Conditioning Pack | 1 | |
| J21001-182 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-183 | Fishpole Hoist Adapter Eqpt - Air Conditioning Pack | 1 | |
| J21001-2 | HOIST ADAPTER EQPT-AIR CONDITIONING PACK | 1 | |
| J21001-3 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-72 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 1 | |
| J21001-73 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 1 | |
| J21001-74 | HEX ADAPTER ASSY | 1 | |
| J21001-75 | C/R ADAPTER ASSY | 1 | |
| J21001-76 | ACM ADAPTER ASSY | 1 | |
| J21001-79 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 5 | |
| J21001-80 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 7 | |
| J21001-81 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-81-M | FISHPOLE ADAPTER EQPT, MFD PARTS FOR -81 | 1 | |
| J21001-82 | HX Adapter Assy | 5 | |
| J21001-83 | C/R Adapter Assy | 2 | |
| J21001-84 | HOIST ADAPTER EQPT -0 AIR CYCLE | 2 | |
| J21001-88 | HOIST ADAPTER EQPT -0 ARM | 1 | |
| J21001-89 | HOIST ADAPTER EQPT -0 ARM | 4 | |
| J21001-90 | HOIST ADAPTER EQPT -0 | 1 | |
| J21001-94 | Hoist adapter eqpt-air conditioning pack | 1 | |
| J2100180 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 7 | |
| J21002-1 | PROOF LOAD EQUIPMENT - HOIST ADAPTER EQUIPMENT, A/C PACK | 5 | |
| J21007-31 | LIFT ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST | 2 | |
| J23001-1 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 1 | |
| J23001-12 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 1 | |
| J23001-26 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 6 | |
| J23001-27 | HOIST ADAPTER - SATCOM, TOP-MOUNTED HIGH GAIN ANTENNA | 1 | |
| J23002-18 | HANDLE ADAPTER ASSY | 1 | |
| J24001-43 | HOIST ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) (PW/GE/RR ENGINES) | 5 | |
| J24001-50 | HOIST ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) (PW/GE/RR ENGINES) | 11 | |
| J24002-73 | HOIST ADAPTER - IDG (PW/GE/RR ENGINES) | 8 | |
| J24002-74 | HOIST ADAPTER ASSY | 1 | |
| J24018-1 | HOIST ADAPTER - IDG | 8 | |
| J24018-49 | HOIST ADAPTER - IDG | 5 | |
| J24019-1 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 6 | |
| J24019-2 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J24019-3 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J27003-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, L.E. SLAT | 9 | |
| J27003-2 | DRIVE ADAPTER -TORQUE TUBE | 1 | |
| J27015-1 | SPLINE ADAPTER - LE/TE POWER DRIVE UNIT, MANUAL DRIVE | 6 | |
| J27015-2 | SPLINE ADAPTER PDUS | 1 | |
| J27021-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, T.E. FLAP | 11 | |
| J27022-1 | Adapter - Torque, Slat Pinion (Kit) (-2 Adapter For Inboard, -3 Adapter For Outboard) | 8 | |
| J27022-2 | INBD ADAPTER ASSY | 1 | |
| J27022-3 | OUTBD ADAPTER ASSY | 1 | |
| J27060-1 | TEST ADAPTER (4 IT) | 1 | |
| J27072-1 | ADAPTER - TEST, SARD SYSTEM | 13 | |
| J27078-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 11 | |
| J27083-1 | CABLE ADAPTER TESTER | 3 | |
| J27084-7 | Puller adapter assy 3 | 1 | |
| J27108-1 | DRIVE ADAPTER - DRIVE LINE COUPLING, FLAP AND SLAT | 1 | |
| J27108-13 | DRIVE ADAPTER – T.E. FLAP TORQUE TUBE COUPLING | 1 | |
| J28017-1 | EQUIP. ADAPTER PRESS | 6 | |
| J29003-72 | Hoist Adapter - ADU Removal/installation | 4 | |
| J29003-85 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 7 | |
| J29003-86 | HOIST ADAPTER ASSY | 1 | |
| J29003-93 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION | 7 | |
| J29003-96 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 1 | |
| J29007-1 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 5 | |
| J29007-2 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 4 | |
| J29007-3 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 4 | |
| J32019-4 | HOIST ADAPTER ASSY | 1 | |
| J32025-1 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 7 | |
| J32025-1-M | HOIST ADAPTER EQPT | 1 | |
| J32025-29 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 4 | |
| J32026-1 | HOIST ADAPTER EQUIPM | 7 | |
| J32032-19 | Wheel Retention Nut Adapter Socket - MLG | 9 | |
| J32032-22 | MLG ADAPTER WHEEL RETAINING NUT | 23 | |
| J32042-8 | Socket Adapter Assembly | 3 | |
| J32042-80 | Socket adapter assy | 2 | |
| J32042-82 | Socket Adapter Assembly | 3 | |
| J32055-01 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-03 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-1 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
| J32055-10 | Socket Adapter Assembly | 1 | |
| J32055-11 | Socket Adapter Assembly | 1 | |
| J32055-13 | Spanner Adapter Assembly | 1 | |
| J32055-14 | Socket Adapter Assembly | 1 | |
| J32055-17 | Spanner Adapter | 1 | |
| J32055-18 | Spanner Adapter | 1 | |
| J32055-19 | Spanner Adapter | 1 | |
| J32055-20 | Spanner Adapter | 1 | |
| J32055-26 | Spanner Adapter | 1 | |
| J32055-27 | Spanner Adapter | 1 | |
| J32055-3 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
| J32055-39 | Straight Adapter | 1 | |
| J32055-44 | Spanner Adapter | 1 | |
| J32055-48 | Torque Adapter Set | 1 | |
| J32055-50 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 8 | |
| J32055-51 | Socket Adapter Assembly | 1 | |
| J32055-52 | Socket Adapter Assembly | 1 | |
| J32055-61 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
| J32055-62 | Socket Adapter Assembly | 1 | |
| J32055-65 | Spanner Adapter Assembly | 1 | |
| J32055-7 | Socket Adapter Assembly | 1 | |
| J32055-74 | Socket Adapter | 1 | |
| J32055-76 | Spanner Adapter Assembly | 1 | |
| J32055-8 | Socket Adapter Assembly | 1 | |
| J32055-81 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 4 | |
| J32055-82 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 2 | |
| J32055-85 | Socket Adapter Assembly | 1 | |
| J32055-9 | Socket Adapter Assembly | 1 | |
| J32055-97 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 1 | |
| J32060-1 | DRAIN ADAPTER EQUIP | 26 | |
| J32085-6 | Adapter Wrench Assembly | 3 | |
| J45001-10 | AUXILIARY ADAPTER CABLE | 1 | |
| J45001-12 | PMAT PORT ADAPTER CABLE | 1 | |
| J46069 | TORQUE ADAPTER BALL ASSEMBLY | 1 | |
| J46088 | TORQUE ADAPTER ASSEMBLY | 1 | |
| J46098 | TORQUE ADAPTER BEARING | 1 | |
| J46100 | TORQUE ADAPTER BEARING | 1 | |
| J46156 | CROWFOOT ADAPTER FOR PRESSURE INDICATOR VALVE | 1 | |
| J46157 | CROWFOOT ADAPTER FOR CHANGING VALVE | 1 | |
| J46162 | TORQUE ADAPTER BALL ASSEMBLY | 1 | |
| J47549 | NLG NUT ADAPTER WRENCH SOCKET | 43 | |
| J47566 | WRENCH ADAPTER NLG | 19 | |
| J49005-1 | JACKING ADAPTER - APU CRADLE | 2 | |
| J5100 | TORQUE ADAPTER SET, 12 POINT, 3/8" DRIVE | 2 | |
| J51005-1 | Installation/Removal Adapter - Fuselage Drain Valv | 3 | |
| J51005-7 | Instl Removal Adapter Fuselage Drain Valve | 10 | |
| J52024-15 | LATCH ADAPTER FTG | 1 | |
| J54001-68-M | HOIST ADAPTER EQPT | 1 | |
| J54005 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 1 | |
| J54005-1 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 2 | |
| J54005-32 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 3 | |
| J54005-51 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL (CE) | 4 | |
| J57019-1 | SOCKET ADAPTER SET - HANGER LINK | 1 | |
| J65 | FINGER ADAPTER ASSEMBLY | 1 | |
| J71002-81 | SQUARE DRIVE ADAPTER STORAGE BOX | 1 | |
| J71008-16 | OFFSET ADAPTER ASSY | 1 | |
| J71013-23 | AFT ADAPTER EQPT | 1 | |
| J71013-25 | AFT ADAPTER EQPT | 6 | |
| J71013-44 | FWD ADAPTER EQPT | 5 | |
| J78015-97 | EQUIP ADAPTER LIFT | 10 | |
| JACK ADAPTER DO328 NLG | JACK ADAPTER DO328 NLG | 1 | |
| JCIPSD737-1 | TOOL-FQIS TEST SET ADAPTER KIT | 1 | |
| JGHLAB | Ionic Systems RFF05 John Guest To Hoselock Adapter SK306, Blue | 2 | |
| JGSAB | Ionic Systems John Guest 12 mm x 1/2 in Straight Adapter Brass | 2 | |
| JHWBS-130 | 3/8 DR. ADAPTER 3/8 Fx1/2 M | 1 | |
| JHWHNX-130 | 3/4 DR ADAPTER 3/4 F 1 M | 1 | |
| JHWHNX-131 | 3/4 DR ADAPTER 3/4 M 1 F | 1 | |
| JHWMB-130 | 1/4 DR ADAPTER 1/4 F 3/8 M | 1 | |
| JHWMB-130B | 1/4 DR ADAPTER 1/4 F 3/8 M | 1 | |
| JHWSH-130 | 1/2 DR. ADAPTER 1/2 Fx3/4 M | 1 | |
| JHWX-20C | 1 DR ADAPTER FOR X-20B | 1 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| JRC1900B | HPT SHROUD SUPPORT ADAPTER WRENCH | 1 | |
| K-1152 | PT6 / PT6A (Pratt & Whitney) Adapter Kit | 7 | |
| K-1243 | ENGINE COMPRESSOR WASHER ADAPTER KIT FOR CESSNA CARAVAN AIRCRAFT | 6 | |
| K-1285 | KING AIR PRESSURIZATION ADAPTER KIT | 6 | |
| K-1288 | TRONAIR K-1288 – CPU ADAPTER KIT FOR SELECT CESSNA CITATION AIRCRAFT | 3 | |
| K-1357 | Saab 340 Adapter Kit | 5 | |
| K-1359 | CPU ADAPTER KIT | 6 | |
| K-1559 | CPU ADAPTER KIT | 2 | |
| K-1710 | ADAPTER KIT | 6 | |
| K-1795 | TFE 731 -2 THRU -5 ENGINE STAND ADAPTER KIT | 1 | |
| K-1866 | Kit,Repl Mount Pad Adapter | 1 | |
| K-2032 | ENGINE ADAPTER KIT | 5 | |
| K-2114 | Kit, Cj-610 Engine Adapter (P) | 2 | |
| K-2115 | Kit, P&W Pt6a 1-36 Adapter (P) | 7 | |
| K-2248 | KIT ADAPTER CMF56 | 7 | |
| K-2601 | TRONAIR K-2601 – AIRCRAFT CABIN PRESSURIZATION UNIT ADAPTER KIT – CESSNA, JETSTREAM, & IAI ASTRA | 4 | |
| K-2610 | KIT, CPU ADAPTER (P) | 4 | |
| K-2685 | KIT, PW-530A ADAPTER CE | 4 | |
| K-2714 | Dash 8 100, 200, 300, 400 (Q400) Adapter Kit for ECW | 5 | |
| K-2717 | OXYGEN ADAPTER - FILL, TRANSFER | 6 | |
| K-2728 | NOSE ADAPTER ASSEMBLY KIT | 1 | |
| K-2730 | KIT, MAIN ADAPTER ASSEMBLY (P) | 1 | |
| K-2730 (02-7833-0110) | Main Gear Axle Jack Adapter (02-7833-0110) | 1 | |
| K-2733-02 | KIT,DASH 8-400 NLG ADAPTER (P) | 3 | |
| K-2734-02 | KIT,DASH 8-400 MLG ADAPTER (P) | 5 | |
| K-2769 | KIT, PW-545A ADAPTER CE | 4 | |
| K-2770 | KIT, TFE-731 ADAPTER CE | 4 | |
| K-3151 | KIT, SMALL TIRE ADAPTER (P) | 3 | |
| K-3582 | JACK ADAPTER KIT | 4 | |
| K-3618 | Kit, Pw308a Eng. Adapter (P) | 5 | |
| K-3706 | NITROGEN ADAPTER FOR CHARGING | 17 | |
| K-3803 | ENGINE WATER WASH UNIT ADAPTER KIT | 4 | |
| K-4187 | KIT, 500 SERIES HD ADAPTER (P) | 2 | |
| K-4191 | KIT, NOSE ADAPTER ASS'Y | 2 | |
| K-4229 | KIT, NOSE ADAPTER ASS'Y | 4 | |
| K-4500 | Kit, Engine Compressor Washer Adapter Eurocopter (with Turbomeca Arriel / Makila engines) | 4 | |
| K-4943 | KIT, SUPPLY ADAPTER HOSE | 1 | |
| K-4946 | KIT, SENSING ADAPTER HOSE | 1 | |
| K07003-15 | JACK ADAPTER B787 | 7 | |
| K07004-1 | KIT ADAPTER JACK WIN | 9 | |
| K07005-1 | KIT ADAPTER JACK WIN | 10 | |
| K1710 | KIT, ADAPTER MOTOR WASH UNIT | 6 | |
| K20001-1 | Hoist Adapter - Forward EE Bay LRU's | 1 | |
| K20008-1 | Hoist Adapter Kit - Aft EE Bay LRU's | 1 | |
| K20008-55 | HOIST ADAPTER AFT EE BAY LRU`S | 10 | |
| K21004-1 | Jack Adapter - Heat Exchanger, AC Pack | 1 | |
| K21004-72 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK, K21004-73 OR -86 (INCLUDED IN K21004 ADAPTER EQUIPMENT) | 9 | |
| K21006-1 | Jack Adapter - Cabin Air Compressor, AC Pack | 1 | |
| K21006-46 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 2 | |
| K21006-53 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 10 | |
| K21006-74 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 2 | |
| K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE, AIR CONDITIONING PACK (CE) | 9 | |
| K21009-1 | Jack Adapter - Lower Recirculation Fan, AC Pack | 1 | |
| K21010-1 | Jack Adapter - RAM Air Fan, AC Pack | 1 | |
| K21010-45 | RAM AIR FAN, AIR CONDITIONING PACK - JACK ADAPTER (CE) | 4 | |
| K21010-54 | RAM AIR FAN, AIR CONDITIONING PACK – JACK ADAPTER | 5 | |
| K21011-1 | Jack Adapter - Adjustable, AC Pack Components | 1 | |
| K21011-62 | JACK ADAPTER - ADJUSTABLE, AC PACK COMPONENTS | 9 | |
| K21014-1 | JACK ADAPTER - CONDENSER, AIR CONDITIONING PACK, REMOVAL AND INSTALLATION (CE) | 7 | |
| K21016-1 29 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 10 | |
| K21016-111 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 2 | |
| K21016-129 | Kit. Adapter -Liquid Cooling System Service | 10 | |
| K21016-130 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 8 | |
| K21016-136 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 8 | |
| K21016-136-REVK | CSC Adapter Kit | 1 | |
| K21016-136-REVK-PARTIEL | CSC Adapter Kit | 1 | |
| K21016-155 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 2 | |
| K21029-1 | JACK ADAPTER FOR SECONDARY HEAT EXCHANGER REMOVAL | 4 | |
| K21029-19 | JACK ADAPTER FOR SECONDARY HEAT EXCHANGER REMOVAL | 4 | |
| K21030-1 | PCA ADAPTER - RAM AIR INLET | 2 | |
| K24001 | HOIST ADAPTER ASSY -0 VFSG (GE AND RR) AND ASG | 1 | |
| K24001-1 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 10 | |
| K24001-10 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-101 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-106 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-108 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-109 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-112 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-113 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-114 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 11 | |
| K24001-118 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 12 | |
| K24001-118-REVE | HOIST ADAPTER ASSY - RR VFSG RI | 1 | |
| K24001-119 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 9 | |
| K24001-12 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-120 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 10 | |
| K24001-14 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-15 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-16 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-17 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-18 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-19 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-2 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 2 | |
| K24001-20 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-21 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-22 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-23 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-24 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-25 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-26 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-3 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 2 | |
| K24001-30 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-31 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-32 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-33 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-34 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-35 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-4 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 3 | |
| K24001-40 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-43 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-49 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-5 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-51 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-52 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-53 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-54 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-55 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-58 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-59 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-60 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-61 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-64 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-65 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-69 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-7 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-74 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-75 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-77 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-78 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-79 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-8 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-80 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-81 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-84 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-86 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-88 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-89 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-90 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-91 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-92 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-93 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-94 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-96 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-97 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24001-98 | VFSG SPLINE ADAPTER ALIGNMENT TOOL | 1 | |
| K24001-99 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | |
| K24005-94 | HOIST ADAPTER - VFSG, RR ENGINE STAND | 8 | |
| K24005-96 | Plate adapter assy | 1 | |
| K2478 | ENGINE HOIST FORWARD SLING ADAPTER (560-0260 THRU 0538) | 2 | |
| K26001-10 | 5/8" adapter assy | 1 | |
| K27003-1 | AILERON PCU REM/INST ADAPTER EQPT | 9 | |
| K27007 | DRIVE ADAPTER EQUIPMENT - ACTUATOR HORIZONTAL STAB | 1 | |
| K27007-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 9 | |
| K27012 | Drive Adapter -Torque Tube Coupling. Leading Edge Slat And Trailing Edge Flap | 1 | |
| K27012-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING | 1 | |
| K27028 | Spline Adapter -Leading Edge/Trailing Edge Power Drive Unit. Manual Drive | 1 | |
| K27028-1 | SPLINE ADAPTER - LEADING EDGE TRAILING EDGE PWR DR | 1 | |
| K27030 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-1 | REVOLUTION COUNTER EQUIPMENT AND ADAPTER EQUIPMENT | 7 | |
| K27030-13 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-16 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-2 | 787 ADAPTER SET TOOL | 1 | |
| K27030-4 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-5 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-6 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-7 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-75 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-78 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-88 | REVOLUTION COUNTER & ADAPTER EQPT | 1 | |
| K27030-95 | REVOLUTION COUNTER EQUIPMENT AND ADAPTER EQUIPMENT | 9 | |
| K27068-10 | ENCODER CALIBIRATION ADAPTER SET | 7 | |
| K27068-21 | ENCODER CALIBRATION ADAPTER SET | 1 | |
| K29001-60 | 787 ADAPTER REM/INS IOOL | 7 | |
| K29003-1 | SPL-13651 ; ADAPTER - EDP SUPPLY HOSE HYDRAULIC | 7 | |
| K29005-1 | Jumper - RAT Plug Adapter (Dispatch) | 7 | |
| K32006 | HOIST ADAPTER EQPT -0 NLG DRAG BRACE RMVL/INSTL | 1 | |
| K32006-1 | HOIST ADAPTER EQUIPMENT - NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION (CE) | 7 | |
| K32006-2 | Hoist adapter assy | 1 | |
| K32015-4 | Puller adapter assy | 1 | |
| K32022-1 | Wheel Retention Nut Adapter Socket - NLG | 18 | |
| K32032 | WRENCH ADAPTER STEERING NUT NLG | 1 | |
| K32032-1 | WRENCH ADAPTER - STEERING NUT, NLG | 10 | |
| K32034-1 | TORQUE ADAPTER - ELECTRICAL BRAKE ACTUATOR CONNECTOR, MAIN LANDING GEAR | 9 | |
| K32036-1 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: INCLUDES BOTH ADAPTER SIMULATOR ASSY "-4" ORANGE FOR 787-8, AND "-5" YELLOW FOR 787-9 | 11 | |
| K32036-2 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: ADAPTER SIMULATOR ASSY -4 IDENTIFIED AS ORAN | 8 | |
| K39355 | WRENCH TORQUE ADAPTER ENG | 1 | |
| K4187 | HEAD: ADAPTER KIT,500 SERIES, 01-1270-0010 ONLY | 2 | |
| K4229 | NOSE ADAPTER ASSEMBLY | 4 | |
| K53002-2 | Lifting Adapter Assy | 1 | |
| K53002-39 | Lifting adapter assy | 1 | |
| K71003 | PROOF LOAD FIXTURE ADAPTER -0 BOOTSTRAP | 1 | |
| K71003-1 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT | 1 | |
| K71003-65 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 3 | |
| K71003-73 | Proof Load Fixture Adapter -Bootstrap Equipment | 1 | |
| K71003-79 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 1 | |
| K71003-80 | Proof Load Fixture Adapter -Bootstrap Equipment | 1 | |
| K71003-86 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 1 | |
| K71003-87 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 2 | |
| K71012-1 | 787 - ADAPTER HAND PUMP TOOL | 9 | |
| KA-91-10 | RF CONNECTOR ADAPTER KIT | 1 | |
| KAV 15-45 | VACUUM CLEAN HEPA FILTER FOR CARBON DUST KERSTAR (HW300 TORQUE ADAPTER AND HEAD) | 1 | |
| KGB750-121 | CVR ARINC404 POWER ADAPTER ARINC 757 | 1 | |
| KHC-1015 | Hydraulic Adapter Kit | 4 | |
| KHC-2258 | OVERFLOW HOSE WITH ADAPTER TO SUIT AIRBUS A320 / A330 / A350 / A380 IDG | 7 | |
| KHC1858 | PRESSURE OR SUCTION ADAPTER KIT | 4 | |
| KPC3-825-8 | PITOT ADAPTER COVER | 15 | |
| KQC-139 | PCM ADAPTER KIT | 2 | |
| KTQ0122 | SIGHTING VANE ADAPTER B | 1 | |
| KTQ0124 | TILT STAND ADAPTER D | 1 | |
| L0477-R00 | TIRE CALIBRATOR ADAPTER - AIRBUS | 1 | |
| L135M2905101 | FLEX WITH ADAPTER FOR HYD DRIVE | 1 | |
| L1673-20/000/000 | SELFTEST ADAPTER 200mOhm | 1 | |
| L1673-6/000/000 | SELFTEST ADAPTER 10mOhm | 1 | |
| L44627P05L44627P06 | SPLINED ADAPTER CONDITION-NEW/OHC MANUFACTURER GE | 1 | |
| L50-612 | PITOT STATIC TEST ADAPTER KIT | 4 | |
| L622P3002101 | BUSHING PRESS IN ADAPTER SET | 1 | |
| LBRA-7 | RIGHT ANGLE ADAPTER (PULLER) | 2 | |
| LCTC4558 | LIFING ADAPTER - COMP ROTOR | 1 | |
| LH-ROT-01-11-0 | SERVICE KIT SPRAY ADAPTER CFM56-5B | 1 | |
| LNI-5859 | GREASE EXTENSION ADAPTER – 90° ANGLE | 1 | |
| LNI5859 | GREASE EXTENSION ADAPTER – 90° ANGLE | 1 | |
| LSLMVA7216A | ATF REFILL 13PC ADAPTER KIT | 1 | |
| LT-153 | Torque Adapter for AW139 | 1 | |
| LTCT3076 | HUB & ADAPTER ASSY | 1 | |
| LTCT3685 | GUIDE & ADAPTER - #2 AFT SEAL | 2 | |
| LTCT4172 | CYLINDER FLANGE REWORK ADAPTER KIT | 2 | |
| LTCT5452 | Wrench, Adapter Propeller | 1 | |
| LTCT7188X-01 | Starter, Seal Drain Adapter Assembly | 1 | |
| M1-CHG-PA | POWER ADAPTER ONLY FOR CONDITIONING CHARGER | 1 | |
| M15360 | Extractor, Oil Inlet Adapter | 1 | |
| M15370 | Extractor, Oil Outlet Adapter | 1 | |
| M46750 | WHEEL ADAPTER ATR72-210 | 20 | |
| MA02-00-00 | MLG JACK ADAPTER ATR42/72 | 1 | |
| MAE-T92219 | A300/A310 JACK ADAPTER SET | 1 | |
| MAE-T92238 | A300/A310 JACK ADAPTER SET | 1 | |
| MAP-ADAPT-KIT1-COM | MAP-ADAPT-KIT1-COM;Commscope MAP-200 Kit1 Power Meter Adapter Kit | 1 | |
| MBEU56378 | TORQUE WRENCH ADAPTER 13/16 IN. AF | 1 | |
| MC-4A | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC-4B | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC280006-158 | VACUUM ADAPTER - FUEL VAPOR PURGE SYSTEM | 1 | |
| MCLSMANFP | SMALL WHEEL ADAPTER 16IN FORK | 1 | |
| ME65B40000-1 | TORQUE WRENCH ADAPTER - BRAKES, SIDE CARGO DOOR | 9 | |
| ME65B83635 | TORQUE WRENCH ADAPTER - BRAKES, SIDE CARGO DOOR | 14 | |
| MEN-44A-0401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0423F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0601F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0623F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-0823F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1001F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1023F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44A-1201F | Modular Extension Nosecap for offset adapter - Modular Assy | 2 | |
| MEN-44A-1223F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1423F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1601F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-44B-1623F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-46B-1801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MEN-46B-1823F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
| MFLX-6 | TRANSDUCER ADAPTER (STRAIGHT-6 INCHES (152 MM) LENGTH) | 2 | |
| MFLX6 | TRANSDUCER ADAPTER (NDT) | 2 | |
| MH-05 | WRENCH ADAPTER FOR MH75 | 1 | |
| MH-06 | WRENCH ADAPTER FOR MH75 | 1 | |
| MH-08 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MHBF-06 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MHBF-07 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MHC-08 | WRENCH ADAPTER 08 | 1 | |
| MHCPDN-02 | NOSE ADAPTER FOR HAND TOOL | 1 | |
| MHPDN-01 | NOSE ADAPTER FOR MH75 | 1 | |
| MHPDN-02 | NOSE ADAPTER (HOLDS NUT) | 1 | |
| MIT012N8041-1J-507 | CYL ADAPTER ASSY | 1 | |
| MIT65B01201 | WRENCH ADAPTER - GLAND NUT, WING AND BODY GEAR | 8 | |
| MIT65B01202-1 | ADAPTER ADAPTER ASSSY - LG WHEEL RETAINING | 10 | |
| MIT65B01218 | TORQUE ADAPTER - DRAG BRACE ASSEMBLY, WING LANDING GEAR | 6 | |
| MIT65B01500 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
| MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
| MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B02025 | TORQUE WRENCH ADAPTER ASSEMBLY - MIDFLAP INBOARD TRAILING EDGE | 1 | |
| MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
| MIT65B04308-1 | TORQUE ADAPTER SET - CARGO DOOR MECHANISM | 1 | |
| MIT65B05124 | TORQUE ADAPTER - END CAP, LOWER TRIPOD PIN NOSE LANDING GEAR | 1 | |
| MIT65B08802-1 | TORQUE WRENCH ADAPTER - BUNGEE DOWNLOCK, JURY STRUT, BODY LANDING GEAR | 1 | |
| MIT65B11261 | PIN ADAPTER TORQUE | 3 | |
| MIT65B15171 | TORQUE ADAPTER - VARIABLE CAMBER FLAPS HINGE NUT | 2 | |
| MIT65B80495 | SPANNER ADAPTER - BRAKE PEDAL, CABLE BUS, CRANK ASSEMBLY | 1 | |
| MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM AND CENTERING MECHANISM, LATERAL CONTROL | 2 | |
| MIT65B80550 | TORQUE ADAPTER WRENCH | 6 | |
| MIT65B80859 | TORQUE WRENCH ADAPTER - SEQUENCE MECHANISM ASSEMBLY SPEED BRAKE | 1 | |
| MIT65B80934 | SPANNER ADAPTER - GEARBOX ASSEMBLY, OUTBOARD AILERON LOCKOUT | 1 | |
| MIT65B81213 | TORQUE WRENCH ADAPTER - FORWARD RUDDER QUADRANT | 1 | |
| MIT65B81276 | TORQUE WRENCH ADAPTER - NOSE LANDING GEAR | 1 | |
| MIT65B81561 | SPLINE ADAPTER - OUTBOARD FLAP DRIVE | 3 | |
| MIT65B82314 | TEST ADAPTER - INBOARD HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| MIT65B82831 | SPLINED ADAPTER - ENGINE CONTROL, AUTOTHROTTLE CONTROL | 1 | |
| MIT65B90315 | TORQUE ADAPTER ACCESS LATCHES DOOR NACLE STRUT | 3 | |
| MIT65B92408-1 | ALIGNMENT FIXTURE - ADAPTER SHAFT | 9 | |
| MIT69B82662 | SOCKET ADAPTER SET - SPOILER ACTUATOR BOLT | 4 | |
| MIT69B82662-17 | SOCKET ADAPTER SET | 1 | |
| MJ-A4-0401F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0423F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0623F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0801F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-0823F | Modular Extension Nosecap for offset adapter - jaw model number | 2 | |
| MJ-A4-1001F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1023F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1201F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-A4-1223F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1401F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1423F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B4-1623F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B6-1801F* | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MJ-B6-1823F* | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
| MLG EMB 190 | MLG HANDLING TROLLEY ADAPTER SET | 2 | |
| MLGEMB190 | MLG HANDLING TROLLEY ADAPTER SET | 2 | |
| MODEL 5748 | MAXI UNIVERSAL ADAPTER KIT | 1 | |
| MODEL 801600 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | 1 | |
| MODEL Y8100 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | 1 | |
| MP-06 | WRENCH ADAPTER (3/16-4,8 MM) | 1 | |
| MP-07 | WRENCH ADAPTER (7/32-5,6 MM) | 1 | |
| MP-08 | WRENCH ADAPTER (1/4-6,4 MM) | 1 | |
| MPBF-06 | PISTOL GRIP ADAPTER COMP. | 1 | |
| MPBF06 | PISTOL GRIP ADAPTER COMP. | 1 | |
| MPPBF-8 | NOSE ADAPTER MPPBF-8 | 1 | |
| MPRBF06 | PISTOL GRIP ADAPTER COMP. | 1 | |
| MPTBF3-10 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MRBF-06 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MRBF-07 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MRBF-08 | WRENCH ADAPTER (TURNS SCREW) | 1 | |
| MRC-08 | WRENCH ADAPTER -08 | 1 | |
| MRPDN-02A | NOSE ADAPTER (HOLDS NUT) | 1 | |
| MS 33514E8 | OUTLET PORT TEST ADAPTER | 2 | |
| MS17984C404 | TRANSPORTATION ADAPTER ENGINE REMOVE-INSTALL | 1 | |
| MS21250-05010 | SCREW ADAPTER ( CN 295 ) | 1 | |
| MS21902-2R | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21902-3R | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21902-4 (MS-UN-04-04SS) | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21902-5 (MS-UN-05-05-SS) | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21902K12 | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916-06-04 (MS-UN-06-04-SS) | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916-06-05 (MS-UN-06-05-SS) | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916-08-06 (MS-UN-08-06-SS) | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916-16-12R | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916-3-2R | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916J10-08 | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS21916J5-4 (MS-UN-05-04-SS) | FLARELESS MALE ADAPTER - UNION | 1 | |
| MS24203-1 | FITTING ADAPTER (NOZZLE)-MS24203-1 | 12 | |
| MS28889-2 | SHOCK ABSORBER SERVICING ADAPTER (AIR /OIL) | 14 | |
| MS4001645-1 | PRESSURE CHUCK ADAPTER RESERVOIR FWD-AFT SLIDE PN 4A3904 SERIES | 1 | |
| MS4001670-1 | PRESSURE CHUCK ADAPTER POB PN 5500/5600 & 9700/9800 SERIES | 1 | |
| MS4001671-1 | PRESSURE CHUCK ADAPTER MID SLIDE PN 66898-101/102 | 1 | |
| MS4001672-1 | PRESSURE CHUCK ADAPTER OFF WING SLIDE PN 60592-SERIES | 1 | |
| MS4001673-1 | PRESSURE CHUCK ADAPTER POCA PN 3552 SERIES | 1 | |
| MS4001674-1 | PRESSURE CHUCK ADAPTER COB PN 897 SERIES | 1 | |
| MS4001675-1 | PRESSURE CHUCK ADAPTER COB PN B42365-1 | 1 | |
| MS4001676-1 | PRESSURE CHUCK ADAPTER COB PN 806835-01 | 1 | |
| MS4001677-1 | PRESSURE CHUCK ADAPTER COB PN 801307 SERIES | 1 | |
| MSFX-UN-04-04SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-05-04SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-05-05SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-06-04SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-06-05SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-06-06SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-08-06SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-08-08SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-10-08SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-10-10SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MSFX-UN-12-10SS | FLARELESS SWIVEL ADAPTER - UNION | 1 | |
| MT0011 | TORQUE ADAPTER - FIREWALL, CONNECTOR | 12 | |
| MT357-5 | TORQUE ADAPTER (FRDH101 *; 3/8" SQUARE DRIVE) | 1 | |
| MT548-1 | ENGINE HOIST ADAPTER (INCLUDES FITTING, BOLT, WASHERS, AND NUTS) | 1 | |
| MTD550BF | TORQUE ADAPTER BF | 1 | |
| MWS905GS | AC/DC ADAPTER FOR THE DISPLEY UNIT | 1 | |
| N-2055-25 | REDUCER ADAPTER (20-16) | 1 | |
| N110-11-23-142 | HEX ADAPTER FOR BITS | 1 | |
| N16C-BR-B | 16 pin lemo to 8 pin burndy adapter Bridge | 1 | |
| N16C-BR-B/R | 16 pin lemo to 8 pin burndy adapter Bridge/Reflection | 1 | |
| N16C-BR-R | 16 pin lemo to 8 pin burndy adapter Reflection | 1 | |
| N18061 | AC ADAPTER 16V 45A | 1 | |
| N2965600 | IV86U OPTICAL ADAPTER AT120D/NF REF : N2965600 | 1 | |
| N2966400 | SIDE VIEWING , 120 DEGREE FIELD OF VIEW TIP ADAPTER DEPTH OF FIELD 6 - INFINIY MM | 1 | |
| N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | 1 | |
| N4148800 | AT120D/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. 2,275.00 2,275.00 - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 2 - 200MM - 1 YEAR WARRANTY | 2 | |
| N4148900 | AT120D/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 17 - MM - 1 YEAR WARRANTY | 2 | |
| N4149000 | AT100S/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 2 - 15MM - 1 YEAR WARRANTY | 1 | |
| N4149300 | OLYMPUS IPLEX NX FORWARD VIEW OPTICAL ADAPTER (TECHNICAL NO: N4149300) | 1 | |
| N4149500 | OLYMPUS IPLEX NX FORWARD VIEW OPTICAL ADAPTER (TECHNICAL NO: N4137800) | 3 | |
| N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
| N4155100 | IPLEX TIP ADAPTER 4MM 120 DEGREE | 1 | |
| N4155200 | IPLEX TIP ADAPTER 4MM 120 DEGREE | 1 | |
| N4155300 | IPLEX TIP ADAPTER 4MM 100 DEGREE | 1 | |
| N4155400 | TIP ADAPTER AT100S | 1 | |
| N4156000 | TIP ADAPTER MAJ2340 | 1 | |
| NB2604-5A | TYRE VALVE ADAPTER 130W | 1 | |
| NB2604-6A | TYRE VALVE ADAPTER TYPE | 1 | |
| NB2604-RHC | AIR HOSE ASSEMBLY, 18" / 450MM LENGTH COMPLETE WITH UNIVERSAL HANDSTOCK ADAPTER ASSEMBLY (FOR DIRECT | 1 | |
| NB2604-RHS | PUSH ON ADAPTER (NO HOSE) | 2 | |
| NB307010 | SMALL 8V SCREW-ON INFLATION ADAPTER WITHOUT HOSE | 3 | |
| NB307010-2M | INFLATION HOSE WITH SMALL 8V SCREW-ON INFLATION ADAPTER | 2 | |
| NB3070210-2M | HOSE - VALVE ADAPTER TYRE INFLATION HOSE VALVE ADAPTOR | 1 | |
| NB30710 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 1 | |
| NB307100 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 2 | |
| NB3503-15A | MALE BAYONET ADAPTER 1/4" | 1 | |
| NB3503-16D | FEMALE BAYONET ADAPTER 3/8" | 1 | |
| NB485010-2M | INFLATION HOSE WITH LARGE 12V SCREW-ON INFLATION ADAPTER | 3 | |
| NB485100 | LARGE 12V SCREW ON INFLATION ADAPTER (LONG REACH ADAPTER) | 2 | |
| NB485100-2M | INFLATION HOSE WITH LARGE 12V SCREW-ON INFLATION ADAPTER (LONG REACH ADAPTER) | 1 | |
| NB5265 | AIR ADAPTER FOR TIRES | 1 | |
| NB70154 | BRASS OUTLET ADAPTER G1/4 MX1/4 BSPM | 1 | |
| NBDF101 | HOLD ON DUAL FOOT VALVE ADAPTER PUSH/PULL | 1 | |
| NFA-LC-SINGLE | FLUKE LC ADAPTER FOR THE FLUKE FTK1000 | 1 | |
| NGC-4500-6ACH2 | NGC-4500-6ACH2;WX4500 Cat6A Channel Adapter Pair | 1 | |
| NGC-4500-COAX | NGC-4500-COAX;NGC-4500 Coax Adapter Pair _75 ohm F-Type Interface | 1 | |
| NGC-4500-EF-MM1-ENC | NGC-4500-EF-MM1-ENC;NGC-4500 Encircled Flux MultiMode Adapter - Encore | 1 | |
| NGC-4500-M12 | NGC-4500-M12;M12 Channel Adapter Pair for Certifier 40G | 1 | |
| NGC-4500-MPO-PM | NGC-4500-MPO-PM;MPO Power Meter Adapter for NGC-4500 | 1 | |
| NGC-4500-MPO-S | NGC-4500-MPO-S;MPO Light Source Adapter for NGC-4500 | 1 | |
| NGC-4500-PWRAD | NGC-4500-PWRAD;Power Adapter for WX4500 | 1 | |
| NGC-4500-SM2 | NGC-4500-SM2;NGC-4500 Certifier40G Singlemode Adapter Kit for Certification Testing At 1310nm and 1550nm Wavelengths | 1 | |
| NGC-CAT6APLUS-CH1 | NGC-CAT6APLUS-CH1;Single Enhanced Channel adapter for NGC | 1 | |
| NGC-CAT6APLUS-PL1 | NGC-CAT6APLUS-PL1;Single Enhanced Link adapter for NGC | 1 | |
| NGC-IND-ETH-E2E-KIT | NGC-IND-ETH-E2E-KIT;Certifier Adapter Kit for Industrial Ethernet End-to-End testing | 1 | |
| NN-PC8312-S2 | FIREWIRE ADAPTER CABLE | 1 | |
| NOR941168S | FULL ALLISON ADAPTER SET | 1 | |
| NOR941923 | METAL ADAPTER FOR F150S | 1 | |
| NOR941925 | METAL ADAPTER FORD FOCUS | 1 | |
| NSC-ETHERNET-ADAPTER | NSC-ETHERNET-ADAPTER;Ethernet Cat6a M-F Adapter Cable - 0.5m/1.5ft | 1 | |
| NTG2604-D | UNIVERSAL ADAPTER FITS (S) 8V (L)12V SIZE VALVES (450MM AIR HOSE ASSEMBLY ) | 6 | |
| NTG5004-D | PRESSURE GAUGE WITH 90 DEGREE UNIVERSAL ADAPTER FOR 8V AND 12V SIZE TYRE VALVES | 3 | |
| NTG5004-HH1 | 1X45 DEGREE ANGLED ADAPTER FOR SMALL 8V SIZE VALVES | 1 | |
| NTG5004-HH1L | 1X45 DEGREE ANGLED ADAPTER FOR LARGE 12V SIZE VALVES | 1 | |
| NTGPC-002 | END ADAPTER - TYRE PRESS. GAUGE | 1 | |
| O2N2FP0039 | CHARGE ADAPTER -OXYGEN | 1 | |
| OAT-2193 | OUTLINE ADAPTER SQUARE DRIVE CLUTCH SET RUN IN | 1 | |
| OFA | Oxygen Fill Adapter - New | 1 | |
| OLP-35SC | OLP-35SC;OLP-35SC - Broadband Power Meter with fixed SC Adapter - Bundle | 1 | |
| OMP2506-3 | ADAPTER - FILL, IDG OIL SERVICE PRESS QUICK-DISC ADAPTER FOR IDG OIL SERVICE. | 21 | |
| ONX-2XX-PWR-ADPT-WALL | ONX-2XX-PWR-ADPT-WALL;OneExpert 2XX - Power Adapter with International Power Plugs | 1 | |
| OUT713 | TORX ADAPTER NO T0 | 1 | |
| OUT713/690605 | TORX ADAPTER N°T0 | 1 | |
| P/N: A120N-FWD-RED | OPTICAL ADAPTER OLYMPUS FWD VIEW | 1 | |
| P14789-4 | PITOT STATIC ADAPTER | 8 | |
| P15589M-3 | PITOT STATIC ADAPTER (IN 0005093) | 5 | |
| P15589M1-4 | PITOT-STATIC ADAPTER TOOL | 2 | |
| P17720-4 | PITOT STATIC ADAPTER | 3 | |
| P204-30HVPZT | BNC - ADAPTER | 1 | |
| P22942M1-4 | PITOT TEST ADAPTER ATR 42 / 72 | 7 | |
| P2KABF02 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 6 | |
| P40951M-4 | Pitot tube adapter for Hawker HS125-600/700 & 800 | 1 | |
| P55517M1-3 | Pitot Test Adapter for Falcon 10, 20, 50, 900, 2000 | 4 | |
| P62261M-3 | Pitot Test Adapter - SH60B/S70 | 5 | |
| P62261M-4 | PITOT PROBE ADAPTER ELEVATOR FEEL COMPUTER | 5 | |
| P74418-4 | Pitot Adapter | 10 | |
| P75701-3 | PITOT ADAPTER (QTY 2) | 10 | |
| P75701-4 | PITOT STATIC ADAPTER (IN 0005090) | 14 | |
| P75701M2-3 | Pitot Test Adapter for Boeing 737-600/700/800 | 11 | |
| P75701M23 | PITOT ADAPTER HIGH TEMP FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 11 | |
| P77796HT-3 | PITOT STATIC ADAPTER PROBE | 5 | |
| P80128-4 | PITOT TEST ADAPTER | 4 | |
| P86892-4 | TEST ADAPTER - PITOT CONNECTORS | 7 | |
| P99320M1-4C | ADAPTER ADAPTER CHAR | 4 | |
| PA-0026-A | Air Data / Pitot Static Adapter Kit for Cessna Citation | 1 | |
| PA-0035-A | Air Data / Pitot Static Adapter Kit for Gulfstream G650 | 1 | |
| PA4179 | RF ADAPTER (SMA(F) TO SMP(F)) | 1 | |
| PAR1820 | PITMAN TORQUE ADAPTER 46MM | 1 | |
| PBSADP-100 | DP25 TO SERIAL ADAPTER PORT | 4 | |
| PC 1006 | FUELING ADAPTER TRONAIR (USA) | 19 | |
| PC-1006 | OXYGEN CHARGING ADAPTER | 19 | |
| PC-1009 | OXYGEN CHARGE ADAPTER (OUTLET: 9/16-18UNF) | 5 | |
| PC-1011 | TRONAIR PC-1011 – HIGH-PRESSURE NITROGEN ADAPTER – MAX. 3,000 PSI / .305-32 TO -03 JIC FLARE | 7 | |
| PC-12 | PC12 ADAPTER KIT | 1 | |
| PD-602 | WRENCH MECHANICAL USE WITH ADAPTER (23068496). | 1 | |
| PDL-AP-01-AB-F | PDL ADAPTER IN AIRBUS BLUE | 3 | |
| PF | STARTER FILLER ADAPTER TURBO NY 600 | 1 | |
| PF 54124-10P-1 | STARTER FILLER ADAPTER TURBO NY 600 | 1 | |
| PF53175 | STARTER FILLING ADAPTER (OIL DISPENSER ADAPTER) | 3 | |
| PF55759 | GRAVITY FILL ADAPTER ASSY | 3 | |
| PHENOM300-945 | Pitot Static Adapter Kit | 3 | |
| PM-TA1-19997AB | PIVOT ADAPTER FOR THALES DKS | 1 | |
| PME3321B2650-1 | JACK ADAPTER VSCF AND IDG | 1 | |
| PME3321B26501 | JACK AND ADAPTER IDG | 1 | |
| PO58212-TA | TOOL BOARD TERMINAL ADAPTER (4 IT) | 1 | |
| PPK3706 | K-3706 HIGH PRESSURE CONNECTOR AIRCRAFT GOOSE NECK STRUT SERVICE ADAPTER | 1 | |
| PS49742M-3-4 | PITOT TEST ADAPTER DA42 WITH DE-ICE | 4 | |
| PS49742M-3-4, | PITOT ADAPTER & HOSES FOR DIAMOND DA-42 | 4 | |
| PS49742M-4-4 | PITOT STATIC ADAPTER DA-42 | 5 | |
| PS56620-4-4 | PITOT TEST ADAPTER DA42 NO DE-ICE | 4 | |
| PS56620M2-4-4 | Pitot Static Test Adapter for Piper | 5 | |
| PSD40-502 | Fuel Quantity Adapter for /B727/B737/B747 | 8 | |
| PSD40-502-3 | FUEL QUANITY ADAPTER CABLE | 8 | |
| PSD40-5023 | FUEL QUANITY ADAPTER CABLE | 8 | |
| PSD60-1AF | FUEL TANK PROBE ADAPTER TEST SET (LOCKHEED CO) | 5 | |
| PSD737-1 | FQIS TEST SET ADAPTER KIT (W/O DENSIT.) | 9 | |
| PSD737-1 (55-0597-22) | FQIS TEST SET ADAPTER KIT | 1 | |
| PSD737-1 (W/O DENSIT.) | FQIS TEST SET ADAPTER KIT | 1 | |
| PSD737-2 | FQIS TEST SET ADAPTER KIT | 6 | |
| PSD737-2 (W/ DENSIT.) | FQIS TEST SET ADAPTER KIT | 1 | |
| PSD747-20 | HARNESS ADAPTER - FQIS TESTER INTERCONNECT | 1 | |
| PSD747-22 | HARNESS ADAPTER - FQIS INTERCONNECT | 1 | |
| PSDAF-C130A | FUEL QUANTITY ADAPTER CABLE | 2 | |
| PSS22300-3-4-4 | ACCESSORIES ADTS PITOT STATIC TEST ADAPTER (EQUIP WITH HOSE) | 10 | |
| PSS22300-4-4-4 | PITOT STAIC ADAPTER (0005091) | 2 | |
| PSS22300HT-3-4-4 | PITOT STATIC ADAPTER (0005091) | 1 | |
| PSS61587-3-4-4 | static adapter for Lear 31, 35, 50 & 60 series | 2 | |
| PSS76700-3-4-4 | PITOT TEST ADAPTER 7 | 6 | |
| PSS97865-3-4-4 | Pitot Static Adapter for ERJ 135 & 145 | 4 | |
| PWA 101618 | PUMP ADAPTER (ELBOW) | 4 | |
| PWA 110128 | FUEL SUPPLY INLET PRESERVATION ADAPTER (ADAPTER). | 2 | |
| PWA 115218 | TURBINE EXHAUST CASE (TEC) LEFT SIDE REAR SUPPORT ADAPTER (SUPPORT ADAPTER). | 1 | |
| PWA 115219 | TURBINE EXHAUST CASE (TEC) RIGHT SIDE REAR SUPPORT ADAPTER (SUPPORT ADAPTER). | 1 | |
| PWA 115402 | ROTATIONAL ADAPTER FOR BAROSCOPICAL INSPECTION. | 1 | |
| PWA 115523 | MOTIVE FLOW RETURN PRESERVATION ADAPTER (ADAPTER). | 2 | |
| PWA 25446 | WRENCH ADAPTER #1 BRG | 2 | |
| PWA 26102 | HUB ADAPTER PLATE | 1 | |
| PWA 27886 | PRESSURE ADAPTER | 1 | |
| PWA 28170 | FIXTURE ADAPTER PULLERS | 2 | |
| PWA 80008 | LIFTING ADAPTER (PW2000) | 1 | |
| PWA 85928 | TORQUE ADAPTER (MISSING) | 1 | |
| PWA 8645 | TOOL, ADAPTER WRENCH | 2 | |
| PWA103574 | ADAPTER ADAPTER REM-INST. FAN CASE | 1 | |
| PWA10408 | BORESCOPE ADAPTER FOR STARTER DRIVE | 6 | |
| PWA104199 | IGNITER ADAPTER INSTALLATION TOOL | 4 | |
| PWA105274 | IDG ADAPTER for PW A320NEO | 1 | |
| PWA109773 | AIRFLOW ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
| PWA11 | ENGINE SUPPORT ADAPTER SET NEO 4EA (11) | 1 | |
| PWA111018 | Engine support adapter set NEO 4ea (11) | 4 | |
| PWA111092 | Engine support adapter set NEO 4ea (11) | 4 | |
| PWA111093 | Engine support adapter set NEO 4ea (11) | 4 | |
| PWA111443 | ROTATOR ADAPTER - ENGINE ASSY, BORESCOPE | 4 | |
| PWA111869 | PUSHER, ADAPTER - LPC, LABEL SEAL | 1 | |
| PWA115218 | SUPPORT ADAPTER TEC LEFT SIDE | 1 | |
| PWA115219 | SUPPORT ADAPTER TEC RIGHT SIDE | 1 | |
| PWA115399 | PLATE, ADAPTER - ENGINE ASSY, | 3 | |
| PWA115402 | ROTATOR ADAPTER BORESCOPE INSPECTON | 1 | |
| PWA12292 | Puller PWA 102987 Adapter (Gearbox Installed) | 5 | |
| PWA12386 | PICKLING ADAPTER - ENG FUEL INLET | 3 | |
| PWA211305 | ADAPTER ADAPTER HANDLING | 2 | |
| PWA211308 | LEAK CHECK ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
| PWA211413 | ANTI-TORQUE ADAPTER - REMOVAL OF THE ANGLE GEARBOX | 2 | |
| PWA211435 | TORQUE ADAPTER (NEO) | 4 | |
| PWA212369 | TORQUE ADAPTER (LP35)- ANGLE GEARBOX | 3 | |
| PWA212464 | AIRFLOW ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
| PWA214211 | HEATER, ADAPTER - HUB & STG .2 IBR,LPC | 1 | |
| PWA25497 | POST & INDICATOR ADAPTER - HPC ROTOR_[PWA25497] | 1 | |
| PWA27508 | HUB - FAN ROTOR ADAPTER REM,INST_[PWA27508] | 1 | |
| PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
| PWA27735 | RING, ADAPTER - REAR COMP DR TEC REAR_[PWA27735] | 1 | |
| PWA27774 | PLATE, ADAPTER - 1ST STG TURB ROTOR_[PWA27774] | 1 | |
| PWA27777 | PLATE, ADAPTER - TURB DISK & BLADE RIV_[PWA27777] | 2 | |
| PWA29304 | BELL MOUTH INLET & ADAPTER RING | 1 | |
| PWA29451 | ADAPTER ADAPTER , HY | 7 | |
| PWA32163FAS | JT8D HUB GAGE ADAPTER (IN 0005378) | 1 | |
| PWA45246 | ENG FCU REM/INST NUT TQ ADAPTER WR | 7 | |
| PWA45849 | ANTI-ROTATION ADAPTER NO.2 BEARING | 3 | |
| PWA51926 | TIEROD, ADAPTER ASSY | 1 | |
| PWA7025-4 | WRENCH - IMC TORQ ADAPTER EXT, OUTER_[PWA7025-4] | 1 | |
| PWA76156 | LIFT & TURN ADAPTER - HPT RETAINER_TO ALLOW INS OF DYNAMOMETERS ON HPT_300 X 165 X 13 / 4.4 KG_[PWA76156] | 5 | |
| PWA80007 | LIFTING ADAPTER (PW2000) | 1 | |
| PWA80008 | LIFTING ADAPTER (PW2000) | 1 | |
| PWA80230 | PEDESTAL ADAPTER ADJUSTABLE | 4 | |
| PWA85116 | PLATE ADAPTER HPC FRONT DRUM INSTALLATION | 1 | |
| PWA85202 | BELL MOUTH INLET & ADAPTER RING | 1 | |
| PWA85248 | AIRFLOW TEST ADAPTER - TURBINE C/AIR | 1 | |
| PWA85700 | 767 ADAPTER | 2 | |
| PWA85928 | ADAPTER ADAPTER TORQUE 2.5 BLEED VALVE | 1 | |
| PWA8642 | TOOL, ADAPTER PLATE | 1 | |
| PWA88125 | ADAPTER ADAPTER - N4 BEARING COMPARTMEN | 1 | |
| PWA88770 | TEST ADAPTER PLUG | 1 | |
| PWA95832 | FIXTURE ADAPTER DEAD LOAD TEST | 1 | |
| PWC 58758 | ADAPTER APU TRANSPORT | 4 | |
| PWC30046-07 | PULLER – SEAL CARRIER, ADAPTER HEAD –7, ONLY | 1 | |
| PWC30256 | feeding adapter - Pratt & Whitney Canada | 3 | |
| PWC30331 | COMPRESSOR TURBINE DISK ADAPTER / MOUNT WRENCH | 9 | |
| PWC30393 | flow test adapter - Pratt & Whitney Canada | 4 | |
| PWC30409 | holding adapter - Pratt & Whitney Canada | 2 | |
| PWC30530 | PLUG - FUEL NOZZLE INLET ADAPTER (2) | 9 | |
| PWC30535 | flow adapter - Pratt & Whitney Canada | 3 | |
| PWC30649 | spacer adapter - Pratt & Whitney Canada | 2 | |
| PWC30831 | flow adapter - Pratt & Whitney Canada | 2 | |
| PWC31073-01 | FITTING, FUEL NOZZLE INLET ADAPTER (TWO REQUIRED) | 2 | |
| PWC31263 | CAP, FUEL NOZZLE ADAPTER PRESSURE CHECK | 1 | |
| PWC31280-202 | MEASURING ADAPTER - PRATT & WHITNEY CANADA | 3 | |
| PWC32094 | flow adapter - Pratt & Whitney Canada | 2 | |
| PWC32209 | Gauge Adapter Gas Genrator Assy | 6 | |
| PWC32271 | CT SPRAY TUBE, ADAPTER FOR COMPRESSOR WASH | 12 | |
| PWC32422 | anti-rotation adapter - Pratt & Whitney Canada | 3 | |
| PWC32432 | PRESSURE TEST ADAPTER | 1 | |
| PWC32437 | Balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC32444 | PLATE, ADAPTER | 1 | |
| PWC32446 | balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC32459 | flow adapter - Pratt & Whitney Canada | 3 | |
| PWC32677-300 | Cart, Compressor/Fuel Nozzle Adapter Wash | 13 | |
| PWC32809 | holding adapter - Pratt & Whitney Canada | 2 | |
| PWC32811 | FUEL MANIFOLD ADAPTER FIXTURES | 8 | |
| PWC34546 | Balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC37110 | holding adapter - Pratt & Whitney Canada | 5 | |
| PWC37267 | Splined Adapter PT Pack | 2 | |
| PWC37322 | balancing adapter - Pratt & Whitney Canada | 1 | |
| PWC37360 | holding adapter - Pratt & Whitney Canada | 1 | |
| PWC37368 | holding adapter - Pratt & Whitney Canada | 3 | |
| PWC37422 | ENG ADAPTER REAR | 1 | |
| PWC37504 | measuring adapter - Pratt & Whitney Canada | 1 | |
| PWC37540 | holding adapter - Pratt & Whitney Canada | 6 | |
| PWC37560 | measuring adapter - Pratt & Whitney Canada | 4 | |
| PWC37562 | measuring adapter - Pratt & Whitney Canada | 4 | |
| PWC37563 | measuring adapter - Pratt & Whitney Canada | 3 | |
| PWC37564 | Fixture Adapter | 3 | |
| PWC37614 | pulling adapter - Pratt & Whitney Canada | 6 | |
| PWC37650 | holding adapter - Pratt & Whitney Canada | 3 | |
| PWC37686 | FUEL MANIFOLD ADAPTER CHAMBER | 1 | |
| PWC37686 | Fuel Manifold Adapter Chamber | 1 | |
| PWC37760 | pulling adapter - Pratt & Whitney Canada | 5 | |
| PWC37772 | Oil Drain Adapter | 14 | |
| PWC37825 | lifting adapter - Pratt & Whitney Canada | 3 | |
| PWC37923 | Fuel Manifold Adapter Flow Fixture | 2 | |
| PWC37990 | grinding adapter - Pratt & Whitney Canada | 4 | |
| PWC37994 | grinding adapter - Pratt & Whitney Canada | 2 | |
| PWC38001 | holding adapter - Pratt & Whitney Canada | 5 | |
| PWC38176 | Tool Kit Flow Test Adapter | 1 | |
| PWC38212 | ENG ADAPTER REAR | 7 | |
| PWC38231 | holding adapter - Pratt & Whitney Canada | 3 | |
| PWC38290 | grinding adapter - Pratt & Whitney Canada | 6 | |
| PWC38307 | mount adapter - Pratt & Whitney Canada | 3 | |
| PWC38386 | FUEL MANIFOLD ADAPTER BASE | 2 | |
| PWC40027 | HOLDER ADAPTER ARM | 2 | |
| PWC40157 | EXTENSION TORQUE ADAPTER | 1 | |
| PWC40350 | HOLDING ADAPTER AGB | 1 | |
| PWC40624 | Acc. Adapter kit | 1 | |
| PWC40625 | Acc. Adapter kit | 1 | |
| PWC40637 | GBS Adapter Cable | 1 | |
| PWC40712 | DCU Adapter Cable | 4 | |
| PWC40781 | ADAPTER (FAN BALANCING ASSEMBLY) | 4 | |
| PWC40827 | EEC ADAPTER CABLE | 1 | |
| PWC40827-REVA | EEC ADAPTER CABLE | 1 | |
| PWC40986 | LOOPBACK ADAPTER CAB | 1 | |
| PWC40986-REV- | LOOPBACK ADAPTER CABLE | 1 | |
| PWC42041 | ADAPTER , ANTI - ROTATION | 3 | |
| PWC42231 | Duct Adapter Rear | 1 | |
| PWC43064 | vane ring adapter (grinding) | 2 | |
| PWC44203 | ADAPTER ANTI-ROTATION | 1 | |
| PWC46240 | BUILD POST ADAPTER – FANCASE | 1 | |
| PWC46575 | OVERHEAD LIFTING ADAPTER - HPT | 1 | |
| PWC46681 | LOAD ADAPTER A FLG RING | 1 | |
| PWC48468 | PULLER SPLINE ADAPTER REMOVAL | 4 | |
| PWC50054 | ENGINE COMBINING GEARBOX, OUTPUT ADAPTER REMOVAL & INSTALLATION | 5 | |
| PWC50055 | ENGINE COMBINING GEARBOX, OUTPUT ADAPTER REMOVAL & INSTALLATION | 5 | |
| PWC50059 | Balancing adapter - Pratt & Whitney Canada | 2 | |
| PWC50216 | flow adapter - Pratt & Whitney Canada | 1 | |
| PWC50373 | Lifting adapter - Pratt & Whitney Canada | 4 | |
| PWC50699 | lifting adapter - Pratt & Whitney Canada | 3 | |
| PWC50940 | lifting adapter - Pratt & Whitney Canada | 4 | |
| PWC51121 | Flow Test Adapter kit (9 Pieces) | 1 | |
| PWC51630 | GRINDING ADAPTER 1ST ASSEMBLY | 1 | |
| PWC51661 | GRINDING ADAPTER 2ST ASSEMBLY | 1 | |
| PWC51739 | AIRFLOW RIG ADAPTER | 1 | |
| PWC54082 | holding adapter - Pratt & Whitney Canada | 5 | |
| PWC54213 | lifting adapter - Pratt & Whitney Canada | 7 | |
| PWC54214 | lifting adapter - Pratt & Whitney Canada | 6 | |
| PWC54234 | balancing adapter - Pratt & Whitney Canada | 2 | |
| PWC54257 | Flow Test Adapter | 1 | |
| PWC54746 | GUIDE, FUEL MANIFOLD ADAPTER PACKINGS | 7 | |
| PWC54933 | HOLDING ADAPTER - PR | 1 | |
| PWC55001 | LIFTING ADAPTER | 1 | |
| PWC55451 | Lifting Adapter (For Vertical Engine Strip) | 1 | |
| PWC56144 | lifting adapter - Pratt & Whitney Canada | 2 | |
| PWC56159 | rod adapter - Pratt & Whitney Canada | 1 | |
| PWC56170 | ECE Adapter "D" | 1 | |
| PWC56434 | lifting adapter - Pratt & Whitney Canada | 4 | |
| PWC56591 | lifting adapter - Pratt & Whitney Canada | 1 | |
| PWC56832 | USB SERIAL ADAPTER CABLE | 1 | |
| PWC56871 | lifting adapter - Pratt & Whitney Canada | 5 | |
| PWC56940 | lifting adapter - Pratt & Whitney Canada | 3 | |
| PWC57401 | Flushing Adapter Tool Set | 1 | |
| PWC57411 | MOTIVE FLOW-FMU ADAPTER Q400 PW150 | 5 | |
| PWC57424 | Flushing Adapter Set | 1 | |
| PWC57496 | Gauge adapter - Pratt & Whitney Canada | 2 | |
| PWC58758 | ADAPTER APU TRANSPORT | 4 | |
| PWC58759 | APU BAR ADAPTER | 3 | |
| PWC59014 | Flushing Adapter with a bolted handle | 1 | |
| PWC59016 | Flushing Adapter | 1 | |
| PWC59053 | Wash adapter - Pratt & Whitney Canada | 8 | |
| PWC59311 | EEC ADAPTER CABLE | 1 | |
| PWC60144 | TOOL, ADAPTER PW308C | 6 | |
| PWC61155 | DRIFT (SPLINE ADAPTER INSTALLATION) | 5 | |
| PWC61512 | PULLER (SPLINE ADAPTER REMOVAL) | 3 | |
| PWC62209 | BRACKET ADAPTER | 3 | |
| PWC62542 | Rear adapter - Pratt & Whitney Canada | 4 | |
| PWC62646 | LIFTING ADAPTER | 1 | |
| PWC62655 | HEATING ADAPTER | 1 | |
| PWC62685 | LIFTER ADAPTER FAN | 1 | |
| PWC63050 | PW306A ADAPTER GBS LINE B | 1 | |
| PWC63052 | GSE Adapter Cable | 1 | |
| PWC63054 | PW308C ADAPTER CABLE ASSEMBLY | 1 | |
| PWC63288-13 | MOUNT ADAPTER PW305&PW306 | 1 | |
| PWC63288-16 | BRACKET ADAPTER PW305&PW306 | 1 | |
| PWC63288-17 | Bracket Adapter PW308 | 1 | |
| PWC63288-21 | MOUNT ADAPTER PW308 | 1 | |
| PWC63288-32 | BRACKET ADAPTER PW307 | 1 | |
| PWC63288-33 | MOUNT ADAPTER PW307 | 1 | |
| PWC63405 | Breather Adapter | 1 | |
| PWC65589 | Drain Adapter Tube | 5 | |
| PWC65617 | P3 Bleed Adapter | 1 | |
| PWC65717 | Breather Adapter Tube | 1 | |
| PWC65819 | EEC ADAPTER CABLE EMC-60 | 1 | |
| PWC69763 | BUILD ADAPTER HPC | 1 | |
| PWC69810 | cable adapter - Pratt & Whitney Canada | 3 | |
| PWC69836 | Wash adapter - Pratt & Whitney Canada | 7 | |
| PWC69875 | Wash adapter - Pratt & Whitney Canada | 1 | |
| PWC70090 | Lifting adapter - Pratt & Whitney Canada | 1 | |
| PWC70124 | LIFTING ADAPTER | 4 | |
| PWC70160 | SOCKET ADAPTER | 5 | |
| PWC70162 | Flushing Adapter Tool Set (12 Pieces) | 1 | |
| PWC70319 | LIFTING ADAPTER | 3 | |
| PWC70386 | LIFTING ADAPTER | 2 | |
| PWC70480 | SOCKET, ADAPTER DRAIN VALVE | 6 | |
| PWC70675 | Lifting adapter - Pratt & Whitney Canada | 2 | |
| PWC70792 | mounting adapter - Pratt & Whitney Canada | 6 | |
| PWC70797 | P3 Leak Check Adapter | 5 | |
| PWC71392 | HYDRAULIC ADAPTER (REPLACES PWC32505 | 6 | |
| PWC72222 | GSE Adapter Cable LEFT | 2 | |
| PWC72520 | FLOW CHECK FIXTURE ADAPTER | 4 | |
| PWC72562 | GSE Adapter Cable RIGHT | 2 | |
| PWC72567 | USB SIGNAL CONVERSION ADAPTER CABLE | 5 | |
| PWC72569 | DCU ADAPTER CABLE (PART OF PWC56909A) | 1 | |
| PWC73009 | RS422 adapter - Pratt & Whitney Canada | 4 | |
| PWC76055 | INSTALLATION TOOL ADAPTER FUEL NOZZLE | 3 | |
| PWC76179 | ECC adapter Cable | 1 | |
| PWC86234 | HOLDER ADAPTER FLANGE | 1 | |
| PWC86874 | CART ADAPTER - OBPD | 1 | |
| PWC86948 | LIFTING ADAPTER - STORAGE CRADLE | 1 | |
| PWC89878 | Pressure Set Adapter - Pratt & Whitney Canada | 2 | |
| PWC90191 | USB To RS-232 Adapter (1 PORT) | 1 | |
| PXT480SG | SIDE VIEW TIP ADAPTER FOV : 80 DEGREE DOF: 4MM TO 80MM | 1 | |
| PYLON-SPIGOT-ADAPTER | PYLON SPIGOT ADAPTER TOOL | 1 | |
| Q46090 | TIGHTENING ADAPTER FOR END FITTING ASSEMBLY | 1 | |
| Q46679 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| Q46680 | TORQUE ADAPTER FOR SPHERICAL BEARING | 1 | |
| Q46681 | TORQUE ADAPTER FOR SPHERICAL BEARING | 1 | |
| Q46682 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| QJXBM19A | 19MM BOXEND ADAPTER W/OFFSET | 1 | |
| QR-330 | INHIBITING ADAPTER INHIBITING RIG ADAPTER - CF6-80E1 ENGINE | 1 | |
| QSU2-400 | QUATECH INTERFACE MODULE SERIAL ADAPTER 4 PORT USB | 1 | |
| QXOM27A | TORQ ADAPTER 27MM OE | 1 | |
| QXOM41A | TORQ ADAPTER 41MM OE | 1 | |
| QXOM46A | TORQ ADAPTER 46MM OE | 1 | |
| QXXM14A | TORQ ADAPTER 14MM BOX | 1 | |
| QXXM16A | TORQ ADAPTER 16MM BOX | 1 | |
| QXXM41A | TORQ ADAPTER 41MM BOX | 1 | |
| QZXM41ADP | TORQ ADAPTER 41MM BOX | 1 | |
| QZXM46ADP | TORQ ADAPTER 46MM BOX | 1 | |
| QZXM50ADP | TORQ ADAPTER 50MM BOX | 1 | |
| QZXM55ADP | TORQ ADAPTER 55MM BOX | 1 | |
| QZXM60ADP | TORQ ADAPTER 60MM BOX | 1 | |
| R-1239 | ATR JACK ADAPTER (PAD) | 8 | |
| R-1496 | TRONAIR® R-1496 ADAPTER FILL COUPLING | 2 | |
| R-EC135-EC145-JACKING | EC135/EC145 JACKING ADAPTER KIT | 1 | |
| R191703 | RADIALL R191703 UG564/U N MALE ADAPTER CONNECTOR - TYPE C FEMALE (86B) | 1 | |
| R46014 | NLG ADAPTER (A/C POST MOD 43866) | 28 | |
| R46014 | A330 NLG WHEEL ADAPTER | 28 | |
| RA-RAFX-6 | FLEX SHAFT ADAPTER FOR RECHII SCANNER MALE CONNECTOR TO RECHII RA PROBE, (4PIN STEP LEMO RECEPTACLE FEMALE CONNECTOR) WITH SLIDING COLLAR, 6.0" LONG. Includes Test Report and Certificate of Conformance | 1 | |
| RA-UR/12FX | FLEXIBLE ADAPTER FOR UNIVERSAL PROBE (4 PIN FISCHER) TO RECHII RA SCANNER, (4PIN STEP LEMO) 12.0 " LONG. | 1 | |
| RADKITPLUSA | MULTI ADAPTER COOLANT REFILLER | 1 | |
| RAR-USB-0085W001 | ARINC 429 USB ADAPTER SET | 1 | |
| RAR-USB-0805W-ECCBL-CASE | ARINC 429 USB ADAPTER SET | 1 | |
| RAR-USB-0805WECCBL-CASE | ARINC 429 USB ADAPTER SET | 1 | |
| RAR-USB-0805WQ01 | ARINC 429 USB ADAPTER SET | 1 | |
| RAUU12FX | FLEXIBLE ADAPTER FOR UNIVERSAL PROBE (4 PIN FISCHER) TO RECHII RA SCANNER, (4PIN STEP LEMO) 12.0 " L | 2 | |
| RB SWE13832-11 | ENGINE ADAPTER STAND (23 LBS) | 2 | |
| RB T101523 | Tail Rotor Adapter Set | 1 | |
| RB T101545 | Tail Rotor Balance Adapter Set | 1 | |
| RB T101970 | Main Transmission Adapter Assembly Build Up Stand | 1 | |
| RB T103040 | Engine To Transmission Alignment Adapter Assembly | 1 | |
| RB T103104 | Backlash And Adapter Removal Outboard Quill | 1 | |
| RB23002223 | Bleed Valve Adapter Test | 2 | |
| RB23005426 | Guide - Spur Adapter Gearshaft C-30 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23006785 | Spur Adapter Gear Install Tool | 2 | |
| RB6799199 | Anti-Icing Air Adapter Valve | 1 | |
| RB6872164 | Turbine Gas Producer Rotor Assembly Adapter Fixture | 2 | |
| RB6872550 | Compressor Rotor Coupler Adapter Holder | 1 | |
| RB6872832 | Compressor Adapter Coupling Puller | 2 | |
| RB6893397 | Install Fuel Pump Splined Adapter Bearing Drift | 2 | |
| RB6893501 | Drift-Spur Adapter Gearshaft | 2 | |
| RB6897868 | Gasifier Turbine Splined Adapter Puller | 2 | |
| RBA9904-501 | Hoist Adapter "C" Model | 1 | |
| RBA9957 | Main Rotor Drive Shaft Torque Adapter (Frdh101) | 2 | |
| RBA9983 | Torque Adapter (Frdh 141) | 2 | |
| RBD29822-5 | TAIL ROTOR P.CNTRL ADAPTER WRENCH | 2 | |
| RBD29904 | Hoist Adapter "D" Model | 3 | |
| RBE-C622G4001101 | Frequency Adapter Adjustment Tool | 1 | |
| RBE332A91-4105-02 | Jack Adapter Pad, Main Landing Gear, Tool | 2 | |
| RBE332A91-4200-00 | JACK ADAPTER PAD NOSE GEAR | 2 | |
| RBE332A91-4205-00 | JACK ADAPTER PAD NOSE GEAR | 1 | |
| RBET642G-1001-101 | Frequency Adapter Restrainer Tool | 1 | |
| RBT101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 2 | |
| RBT18400 | Conditioned Air Adapter Set | 1 | |
| RBT18570 | Reaction Adapter Mast Nut | 1 | |
| RBT18625-010 | Transmission Adapter Pivot | 2 | |
| RBT18625-028 | Engine Adapter Assembly | 1 | |
| RBT18625-08 | Transmission Adapter Tube | 1 | |
| RBT18625-2 | Transmission Adapter Assembly | 1 | |
| RBT18700A | ENGINE STAND C47 ADAPTER (2 PER SET) | 3 | |
| RBT18700C | ENGINE STAND LTS101 ADAPTER (2 PER SET) | 2 | |
| RBT400256 | Power Adapter (430-240-005-101) | 1 | |
| RBW109-3401- 70-115 | ROTOR BRAKE ADAPTER RING NUT REMOVE/INSTALL TOOLS | 2 | |
| RBW109-3401-70-115 | Rotor Brake Adapter Ring Nut Remove/Install Tools | 2 | |
| RBW1205G00132-3G | HELICOPTER SERVICING ADAPTER KIT | 2 | |
| RBW2905G00132-3G | PCM ADAPTER KIT | 2 | |
| RBW6305G19231-3G | Puller Rotor Brake Adapter Flange Remover | 2 | |
| RC2500G06 | "CFM56-7B MANUAL DRIVE PAD ADAPTER 1 " | 1 | |
| RC2510G01 | Futuredrive adapter BR715 | 1 | |
| RC2702G01 | MANUAL DRIVE PAD ADAPTER ASSEMBLY | 1 | |
| RC2920G01 | Trent 1000&7000 hp adapter assy | 1 | |
| RC2921G01 | Trent 1000ip adapter assy | 1 | |
| RC2925G01 | Trent 900hp adapter assy | 1 | |
| RC2926G01 | Trent xwb hp adapter assy | 1 | |
| RDA100i | Rundown Adapter (10-100 IN/LB) | 1 | |
| RF6916W | WRENCH FLUID ADAPTER ASSEMBLY | 2 | |
| RFA-4024 | UNIVERSAL ADAPTER KIT | 1 | |
| RFA-8332 | COAXIAL ADAPTER - REVERSED POLARITY BNC MALE (PLUG | 1 | |
| RFA-8342 | TYPE TNC MALE TO BNC FEMALE ADAPTER (1 REQUIRED) | 1 | |
| RFA-8362 | TYPE N MALE TO BNC FEMALE ADAPTER (2 REQUIRED) | 1 | |
| RFFLDSBX02 | SHOCK ABSORBER SERVICING ADAPTER (AIR/OIL) | 1 | |
| RRD TOOL NUMBER: | PRESSURE FILL ADAPTER KIT | 1 | |
| RRT044502 | TRANSPORTATION STAND FRONT ADAPTER (TRUNNION) | 1 | |
| RRT044503 | TRANSPORTATION STAND FRONT ADAPTER (LOWER LUG) | 1 | |
| RRT044504 | TRANSPORTATION STAND REAR ADAPTER (LEFT LOWER LUG) | 1 | |
| RRT044505 | TRANSPORTATION STAND REAR ADAPTER (RIGHT LOWER LUG) | 1 | |
| RRT046983 | LIFTING SLING FRONT ADAPTER ASSEMBLY (TWO PARTS) | 1 | |
| RRT046984 | LIFTING SLING REAR ADAPTER ASSEMBLY (THREE PARTS) | 1 | |
| RRT050389 | TURNOVER ADAPTER - LOAD HP/IP SUPPORT STRUCTURE. | 1 | |
| RRT061134 | BOOTSTRAP ADAPTER YOKE | 1 | |
| RRT061134-2 | BOOTSTRAP ADAPTER YOKE | 1 | |
| RRT061134-3 | BOOTSTRAP ADAPTER YOKE | 2 | |
| RRT062900 | Inhibitor Rig Adapter Plate | 2 | |
| RRT063356 | PLATE ADAPTER PLATE | 1 | |
| RRT072428 | PRESSURE FILL ADAPTER KIT | 3 | |
| RRT084300 | LIFT ADAPTER B (XWB SES) | 1 | |
| RRT089154 | LIFT ADAPTER - BASIC STAND | 1 | |
| RS232C | CVR AUDIO MONITOR ADAPTER (UNIVERSAL AVIONICS SYSTEM CORP.) | 1 | |
| RS422 | CABLE, ADAPTER - RS422. | 1 | |
| RSE1079 | HOSE GROUND AIR SUPPLY (SEE NOTES FOR ADAPTER PN) | 3 | |
| RSE11 | TORQUE ADAPTER TOOL | 1 | |
| RSE1164 | TORQUE ADAPTER TOOL | 6 | |
| RSE1164 REV A | (SAME AS RSE1195) TORQUE ADAPTER TOOL | 1 | |
| RSE1165 | TORQUE ADAPTER TOOL | 12 | |
| RSE1195 | TORQUE ADAPTER ( SAME AS RSE1164) | 1 | |
| RSE1195 REV B | TORQUE ADAPTER ( SAME AS RSE1164) | 1 | |
| RSE1218 | TORQUE ADAPTER TOOL | 2 | |
| RSE1218 REV NC | TORQUE ADAPTER TOOL | 1 | |
| RSE1234 | TORQUE ADAPTER TOOL | 17 | |
| RSE1234 *(ALT PT NO IAE1N20023) | TORQUE ADAPTER DOOR LATCH | 1 | |
| RSE6403 | INLET LIFTING ADAPTER (ERJ190) | 8 | |
| RSE6403 | INLET LIFTING ADAPTER | 8 | |
| RWT45-0013-00 | ANTENNA INSTALLATION TOOL / ADAPTER RING ALIGNEMENT AID | 1 | |
| S281A001-501 | QAD ADAPTER ASSY | 1 | |
| S3122 | S3122;ALWL ADAPTER SC PC MALE TO LC PC FEMALE--REV000 | 1 | |
| S3126 | S3126;MTP Adapter / black / full flange / with one dust plug | 1 | |
| S34146-4 | Static test adapter Embraer 110, ERJ 135, ERJ 145, ERJ 170, ERJ 190 Lineage 1000 | 10 | |
| S4-3402180-TA | TEST ADAPTER (2IT) | 1 | |
| S76-612 | Pitot tube adapter kit | 3 | |
| S900U390 | ANGLE ADAPTER A35 | 1 | |
| SA-2000 | DUAL AIRLINE BACK-MOUNTED ADAPTER KIT | 4 | |
| SA-EMU | Scanner Adapter for Rohman mini-rotor to unirotor | 1 | |
| SA010338 | TORQUE SPANNER ADAPTER TO REMOVE AND INSTALL TETRACTION PIN | 1 | |
| SA070810 | AC ADAPTER CORD FOR CUI P/N DMS090110X-P5-ET I.T.E POWER SUPPLY, 5 FEET, WITH LED INDICATOR, REPLACEMENT | 1 | |
| SA30022-20 | CIRCLIP ADAPTER FRENO ATR 72 | 1 | |
| SA30022-22 | LOADING ADAPTER FRENO ATR 72 | 1 | |
| SA3Y-P | Universal Static Test Adapter 110V | 1 | |
| SAF1F | ADAPTER 1/2 / ADAPTER 1/2-3/8 | 1 | |
| SAM20077 | TORQUE ADAPTER FOR CYLINDER LINER | 2 | |
| SAO10542 | TORQUE ADAPTER 1/2 IN. SQUARE DR | 1 | |
| SAS-FXU-9 | FLEXIBLE SCANNER ADAPTER FOR 4-PIN PROBES,9"ENGTH,SLIMLINE | 1 | |
| SB78-94 | TEST PIN ADAPTER ELECTRIC SOLENOCD VALVE | 1 | |
| SBE2117A | PNEUMATIC ADAPTER 9/16" | 1 | |
| SBE2155-A02 | HOSE ADAPTER USE ACFT BLEED VALV TEST | 1 | |
| SBE2219 | TEST ADAPTER ASSEMBLY | 1 | |
| SCA-C24002-78 | JACK ADAPTER VSCF AND IDG | 1 | |
| SCA-ODA | OIL DISPENSER ADAPTER APU | 1 | |
| SCA1M-VG8-12S | 350PSI TIRE INFLATION KIT; ADAPTER ZA PUNJENJE GUMA | 1 | |
| SCST1-AK350CU | SCS 350 ADAPTER KIT CU | 1 | |
| SD12540 | WRENCH TORQUE ADAPTER PROPELLER BOLTS | 1 | |
| SD12549 | WRENCH TORQUE ADAPTER PROPELLER HUB | 1 | |
| SE-402-AC3 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT METER - SOUND LEVEL ADAPTER CABLE - RANDOM NOISE GENERATOR VOLTMETER - AC (CAPABLE OF READING 1.0 /- 0.05 VOLTS RMS) | 2 | |
| SE227-2011 | Torque Adapter - Rudder Trim Knob | 1 | |
| SE27-2011 | TORQUE ADAPTER - RUDDER TRIM KNOB | 7 | |
| SE28-1105 | HOSE ADAPTER - SUMP FUEL DRAIN | 2 | |
| SG-1293473 | GLOBAL 7500 AIR DATA ADAPTER KIT | 1 | |
| SG13-ADP-HYC-12 | QUICK DISCONNECT ADAPTER -12 HOSE | 1 | |
| SIC 8921 A | NEEPLE STRUUT ADAPTER ¼ INCH MALE | 3 | |
| SIC2755 | HI PRESSURE STRUT ADAPTER (SPARE) | 1 | |
| SIC8921-A | NIPPLE STRUT ADAPTER X ¼ INCH MALE | 3 | |
| SJN471 | TORQUE ADAPTER 1-1/16’’ | 2 | |
| SJN472 | TORQUE ADAPTER 13/16’’ | 1 | |
| SJN524 | TORQUE ADAPTER 3/4 X 15/16 | 2 | |
| SK-4500-TC | VSWR METER-COMES WITH CASE, INJECTION CABLE AND CALIBRATION ADAPTER (OPEN, SHORT AND LOAD) | 3 | |
| SK2000DAP-T | TAIL SENSORS ADAPTER KIT | 1 | |
| SK701 | PITOT TEST ADAPTER SEAL | 6 | |
| SK951M | RVSM TEST ADAPTER SEAL KIT | 3 | |
| SKA100-4 | STATIC ADAPTER DIAMOND DA-42 | 5 | |
| SKAA01 | SAMPLING VALVE ADAPTER KIT | 1 | |
| SKU2002276 | SCHRADER VALVE STEM ADAPTER LARGE TO SMALL | 1 | |
| SKU2026599 | INFLATING VALVE ADAPTER NITROGEN 3000PSI | 1 | |
| SM5765 | RF ADAPTER ZMA 4 POST (F) TO TYPE TNC (M) | 1 | |
| SM5770 | RF ADAPTER ZMA 4 POST (M) TO TYPE TNC (F) | 1 | |
| SMA028 | Bowers SMA028 SmartPlug M6-M10 Adapter (to use M10 Holders with M6 Plugs) | 1 | |
| SMS765 | RF ADAPTER ZMA 4 POST (F) TO TYPE TNC (M) | 1 | |
| SMS770 | RF ADAPTER ZMA 4 POST (M) TO TYPE TNC (F) | 1 | |
| SOL83-71201001110 | TORQUE ADAPTER RR FWD ASSY | 1 | |
| SPA | Static port adapter kit | 5 | |
| SPDTU1538 | DIESEL ADAPTER DURAMAX 6.6L | 1 | |
| SPK-FMG-011A | FLAT ADAPTER #10-32F (100 LBF) | 2 | |
| SPL-10357 | TORQUE WRENCH ADAPTER STOP NUT - WLG | 1 | |
| SPL-1628 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 1 | |
| SPL-1751 | EQUIPMENT ADAPTER CONTROL WHEEL | 1 | |
| SPL-1808 | CABLE - ADAPTER (USE WITH TELEDYNE DFDAU FLIGHT LINE TESTER P/N 2229738) | 1 | |
| SPL-20727 | TORQUE WRENCH ADAPTER (K27069-1) | 1 | |
| SPL-2358 | SET ADAPTER - TORQUE HMU | 1 | |
| SPL-3997 | DRIVE ADAPTER EQUIPMENT, HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| SPL-8551 | Spline Adapter 9.5 | 1 | |
| SPL-8561 | Wrench Adapter Assembly | 1 | |
| SPL-8562 | Wrench Adapter Assembly | 1 | |
| SPL-9371 | Torque Adapter | 1 | |
| SPL-9842 | TEST ADAPTER ASSY STATIC PORT | 1 | |
| SPL2358 | SET ADAPTER - TORQUE HMU | 1 | |
| SRC1000-01 | BAE / ELBIT PLATE MTG / SMART BREACH PLATE ADAPTER (SBPA) | 1 | |
| SRES18 | SPLINE TORQUE ADAPTER OR COMMERCIALLY AVAILABLE TOOL ACCORDANTLY | 4 | |
| SRES20 | TORQUE ADAPTER ( ½ DRIVE 5/8) | 2 | |
| SRES22 | TORQUE ADAPTER 11/16" X 1/2" PROPELLER NUTS MOUNTING | 3 | |
| SRES306 | TORQUE ADAPTER SET SNAPON | 2 | |
| SS 400-7-2 | GAUGE ADAPTER FITTING | 1 | |
| SS-200-7-4ST | GAUGE ADAPTER FITTING | 1 | |
| SS-200-7-4ST, | GAUGE ADAPTER FITTING (SWAGELOCK) | 1 | |
| SS-300-7-4 | GAUGE ADAPTER FITTING | 1 | |
| SS-400-7-2 | GAUGE ADAPTER FITTING | 1 | |
| SSDMR4B | HEXAGONAL ADAPTER FOR BITS 12 AND 14 | 4 | |
| SSK701 | CL604 STBY PITOT ADAPTER SEAL SPACER KIT | 1 | |
| ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | 1 | |
| ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | 1 | |
| ST2580-243 | TORQUE WRENCH ADAPTER - BOX TYPE, 3.37 NOMINAL ACROSS FLATS | 3 | |
| ST2580-245 | TORQUE WRENCH ADAPTER - CROWFOOT | 3 | |
| ST2580-251 | TORQUE WRENCH ADAPTER -0 375 SLOT-5 O.DIA | 10 | |
| ST2580-263 | TORQUE WRENCH ADAPTER - WALKING BEAM ASSEMBLY - NUT SPACER | 8 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 15 | |
| ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-24-4-7 | STANDARD TOOL-SPANNER WRENCH ADAPTER FOR BACN10RF-NUTS | 1 | |
| ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-XX-X-X | SPANNER WRENCH ADAPTER FOR BACN10RF NUTS. (ST2580-267 DRAWING) | 1 | |
| ST2580-272-11-1 | Torque wrench adapter 11/16 | 1 | |
| ST2580-272-11-2 | Torque wrench adapter 11/16 | 1 | |
| ST2580-272-15-1 | Torque wrench adapter 15/16 | 1 | |
| ST2580-272-15-2 | Torque wrench adapter 15/16 | 1 | |
| ST2580-272-9-1 | Torque wrench adapter 9/16 | 1 | |
| ST2580-272-9-2 | Torque wrench adapter 9/16 | 1 | |
| ST2580-337 | TORQUE WRENCH ADAPTER - FOR 15/16-INCH HEX NUT | 2 | |
| ST2580-550A | TORQUE ADAPTER RATCHETING | 1 | |
| ST2583-1 | Flap Drive Adapter Assembly | 1 | |
| ST2583-2-3 | Spline Adapter Assembly | 1 | |
| ST600-144 | EMPENNAGE PIVOT BOLT ADAPTER (GSE 5520459) | 1 | |
| ST992B | GREASE GUN ADAPTER (OPTIONAL) | 9 | |
| ST9999SMB-01 | SEAT TRANSPORT ADAPTER - CASTER | 1 | |
| STATIC | STATIC LEAK CHECK IDG ADAPTER | 1 | |
| STC90572-1 | KIT ADAPTER JACK WIN | 1 | |
| STD-11561 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1/2 NPT MALE X 1/2" | 1 | |
| STD-6100 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1" NPT X 1" | 1 | |
| STE4230862-1 | TEST ADAPTER P/N | 1 | |
| STI3249 | TORQUE WRENCH INPUT SHAFT ADAPTER 1 | 1 | |
| SUT070001-003 | JACK ADAPTER SET | 1 | |
| SV225 | COM-20583 ADAPTER - STRAY VOLTAGE | 1 | |
| SVC1 | ADAPTER ADAPTER HYD SAMLING VALVE | 1 | |
| SVTA9100 | 9 PC TRUCK COOLING ADAPTER SET | 1 | |
| SWE (SWE13852-406) | 13852-406 ENGINE ADAPTER KIT | 1 | |
| SWE 13832-11 | ENGINE ADAPTER STAND | 1 | |
| SWE 67 | RATCHET ADAPTER 15 | 1 | |
| SWE 8103 | POWER WRENCH ADAPTER 12 | 1 | |
| SWE13832-11 | ENGINE ADAPTER STAND (23 LBS) | 1 | |
| SWE13852-406 | ENGINE ADAPTER KIT | 1 | |
| SWE13875-60 | TRANSMISSION ADAPTER MAIN STAND | 1 | |
| SWE18904-10 | JT8D ADAPTER DRIVESHAFT | 1 | |
| SWE4803 | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | 1 | |
| SWE4803A | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | 1 | |
| SWN-25NPT-25FNPT-PE | Bojo Tools SWN-25NPT-25FNPT-PE - 2 Long Swivel Sealant Nozzle Adapter Male to Female 14 NPT | 1 | |
| T-012882717 | MECHANICAL ADAPTER 18IN | 1 | |
| T-014849378 | MECHANICAL ADAPTER 25IN | 1 | |
| T-4040 | STEP PLATE ADAPTER SET PROTO | 1 | |
| T-449935 | TORQUE ADAPTER WRENCH | 1 | |
| T-511038 | SHORT ADAPTER FOR 6930 | 1 | |
| T-71023 | Torque Adapter - Barrel gland nut | 1 | |
| T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
| T-71038 | Torque Adapter - Barrel gland nut | 1 | |
| T-97483069 | APEX SJ409-2 ADAPTER EXT | 1 | |
| T-A033 | LEAD STUD ADAPTER SET 2M/2FM | 1 | |
| T-J4240-12F | PULLER ADAPTER FEMALE 5/8 | 1 | |
| T-J4240-12M | PULLER ADAPTER MALE 5/8-3 | 1 | |
| T-J4240-14F | PULLER ADAPTER FEMALE 5/8 | 1 | |
| T-J4240-14M | PULLER ADAPTER MALE 5/8-7 | 1 | |
| T0128987 | WRENCH ADAPTER FOR P/N:234125 | 1 | |
| T01571806 | TORQUE ADAPTER WRENCH(15/16SIZE) | 1 | |
| T101382 | RAM ADAPTER O | 1 | |
| T101421 | PLATE, ADAPTER BUILD UP BENCH | 1 | |
| T101545 | TAIL ROTOR BALANCE ADAPTER SET | 1 | |
| T101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
| T103165 | SPLINED ADAPTER O | 1 | |
| T103216-101 | INPUT ADAPTER SPANNER ASSY | 1 | |
| T1F69J | FORK, ADAPTER - MJ-1 | 1 | |
| T3029280-118 | INTERLOCK ADAPTER CABLE | 1 | |
| T3078766 | PROGRAMMING ADAPTER NZ-2000/2010 | 1 | |
| T321542-202 | SSEC ADAPTER CABLE ASSEMBLY | 1 | |
| T321714 | COMPARATOR MONITOR ADAPTER PANEL | 1 | |
| T33264 | Anti-Skid Adapter Removal | 10 | |
| T335871 | PLATE ADAPTER TCAS ANTENNA | 1 | |
| T449935 | TORQUE ADAPTER WRENCH | 1 | |
| T72340183P01 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| T72340183P02 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| T7929920100000100H | JACK ADAPTER (WING RIGHT) | 1 | |
| T7929920210000200H | JACK ADAPTER (WING LEFT) | 1 | |
| T792992040000000B | JACK ADAPTER (FUSELAGE) | 1 | |
| T792992040000000C | JACK ADAPTER (FUSELAGE) | 1 | |
| T89845 | Discharge Port Adapter (2IT) | 1 | |
| T94949 | Speed Setting Adapter Plate | 1 | |
| TA00568 | TEST ADAPTER (2IT) | 1 | |
| TA01160 | PORT PLUG ADAPTER (2IT) | 1 | |
| TA3 | ADAPTER 3/8 / ADAPTER 1/4-3/8 | 6 | |
| TA33000 | TEST ADAPTER RROBE | 1 | |
| TA7500 | PITOT ADAPTER TEST PROBE | 1 | |
| TAB1C049 | RADIATOR CAP ADAPTER TOYOTA | 1 | |
| TAB1C087 | COOLING CAP ADAPTER HYUNDAI | 1 | |
| TE60B40037-1 | TEST ADAPTER - AMPHENOL FUEL QUANTITY PROBE | 1 | |
| TE60B40147 | TEST ADAPTER - TRW/CINCH FUEL QUANTITY PROBE | 1 | |
| TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| TE65-20804 | TORQUE WRENCH ADAPTER STABILIZER TRIM HAND WHEEL | 1 | |
| TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | 1 | |
| TE65B90110 | TUBE ADAPTER - ENGINE START VALVE | 1 | |
| TEE74 | ACTIVE AIDS ADAPTER JT9D-7R4 | 1 | |
| TEEQ01-AM020906/200 | TIRE INFLATION ADAPTER AND PRESSURE GAUGE | 1 | |
| TF | CYCLING ADAPTER DASH-8 NLG | 1 | |
| TF-56989 | CYCLING ADAPTER DASH-8 NLG | 3 | |
| TF-56989-IAS | Q400 CYCLING ADAPTER NLG | 1 | |
| TF50B27002 | GREASING ADAPTER FOR FLAP | 1 | |
| TF50B27002A1 | GREASING ADAPTER FOR FLAP | 2 | |
| TF56989 | CYCLING ADAPTER DASH-8 ,NLG | 3 | |
| TF−56989 | CYCLING ADAPTER DASH−8 NLG | 3 | |
| TGBA-001 | HOLDER ADAPTER FOR GAP BLADES | 1 | |
| TK 2129/9S5 | HARNESS ADAPTER CABLE (BEECHCRAFT CORP) | 1 | |
| TK 2129/9S5 ASSY A | HARNESS ADAPTER CABLE (BEECHCRAFT CORP) | 1 | |
| TK 2129/9S5 ASSY B | HARNESS ADAPTER CABLE (BEECHCRAFT CORP) | 1 | |
| TK2129-935 | HARNESS ADAPTER CABLE: ASSY A,TK2129/935, | 2 | |
| TK2129-935ASSYA | HARNESS ADAPTER CABLE: ASSY A,TK2129/935, | 1 | |
| TK2129-935ASSYB | HARNESS ADAPTER CABLE: ASSY B,TK2129/935, | 1 | |
| TL-99517 | "FUEL NOZZLE ADAPTER TOOL - | 1 | |
| TL037330 | WRENCH, FUEL NOZZLE ADAPTER | 1 | |
| TL114226 | SOCKET, FUEL ADAPTER NOZZLE, SLOTTED | 1 | |
| TL82 | PIN AND SOCKET ADAPTER SET | 2 | |
| TL99517-C | SOCKET, FUEL ADAPTER NOZZLE, SLOTTED- | 1 | |
| TM405555FG | STEREO MEAS. TIP ADAPTER (BLACK) | 2 | |
| TM405555SG | STEREO MEAS. TIP ADAPTER (BLUE) | 2 | |
| TM7900G001 | WASHING TOOL ADAPTER - METALIC | 1 | |
| TM90348 | TORQUE ADAPTER TOOL | 1 | |
| TMA2493 | Brake Torque Spline Adapter Tool | 1 | |
| TMH DI30-00-00 | NATO Adapter F. M12X100 M | 3 | |
| TMH MA02 | Jack Adapter MLG - 13.2 Ton | 2 | |
| TMH MA02-00-00 | MLG Jack adapter ATR42/72 | 8 | |
| TMH MA03 | Jack Adapter MLG - 27 Ton | 1 | |
| TMH NA01 | Jack Adapter NLG - 2.2 Ton | 2 | |
| TMH NA01-00-00 | NLG Jack adapter ATR42/72 | 9 | |
| TMH NA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
| TMH NA10 | Jack Adapter NLG - 5.5 Ton | 1 | |
| TMHDI16-11-00 | PRESS GAUGE ADAPTER - FEM M10X1 / FEM. NATO (ref SE12-00) | 3 | |
| TMHDI16-21-00 | NATO GAUGE ADAPTER TMH M | 1 | |
| TMHDI43-12-00 | SWIVEL ADAPTER 120 DEGREE | 2 | |
| TMHDI43-32-00 | FILLING ADAPTER -ALT | 7 | |
| TMHDIC16-21-00 | PRESURE GAUGE ADAPTER - 14 GAZ FNATO | 1 | |
| TMHDIC43-32-00 | 120 SWIVEL ADAPTER SKYDROL | 1 | |
| TMHMA02-00-00 | MLG JACK ADAPTER (EQ | 8 | |
| TMHMA02-00-00-REVC | MLG JACK ADAPTER (EQ. TO D23205000) | 1 | |
| TMHNA01-00-00 | NLG JACK ADAPTER (20 | 9 | |
| TMHNA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
| TMHNA01-00-00/D2282700 | NLG JACK ADAPTER ATR | 1 | |
| TMRX8 | TORQUE ADAPTER ESTRIADO 1/4 X 1/4 - ABERTO | 2 | |
| TMY20-27-005-1 | GREASING ADAPTER KN5 | 1 | |
| TMY20-35-101 | OXYGEN REFILL ADAPTER ASSEMBLY | 1 | |
| TP920 | PRUEBA SONDA ADAPTER SET, VOLTAJE 300 V, 3 A CORRIENTE | 1 | |
| TPI-3000A | RF ADAPTER KIT | 2 | |
| TPI-300A | WATT METER ADAPTER KIT | 1 | |
| TPI3000A | KIT COAX ADAPTER CONNECTOR | 2 | |
| TPI5010 | UNIVERSAL ADAPTER CABLE KIT | 1 | |
| TPS-AI-H0-S | INTERFACE ADAPTER KIT | 1 | |
| TPT7098-001 | FIRMWARE LOAD ADAPTER HARNESS | 1 | |
| TPT7098-002 | FIRMWARE LOAD ADAPTER HARNESS | 1 | |
| TPT7101-001 | HIU FIRM WARE LOAD ADAPTER HARNESS | 1 | |
| TRI-ACCY-USBPWR-AUS-PLUG | TRI-ACCY-USBPWR-AUS-PLUG;Australian Power Adapter for USB Charger | 1 | |
| TRI-ACCY-USBPWR-VEH | TRI-ACCY-USBPWR-VEH;Vehicle Power Adapter without USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-VEH-WCBL | TRI-ACCY-USBPWR-VEH-WCBL;Vehicle Power Adapter with USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-WCBL | TRI-ACCY-USBPWR-WCBL;AC/DC Power Adapter - Battery Charger w/ USB Power/Data Cable | 1 | |
| TRI-ACCY-USBPWR-WOCBL | TRI-ACCY-USBPWR-WOCBL;AC/DC USB Power Adapter - Battery Charger w/o USB Power/Data Cable | 1 | |
| TRI-DSP-NEW-PWR-ADPT | TRI-DSP-NEW-PWR-ADPT;AC/DC Power Adapter - Battery Charger w/ US Power Cable for New DSP Family | 1 | |
| TRI-DSP-PWR-ADPT-NEW | TRI-DSP-PWR-ADPT-NEW;AC/DC Power Adapter - Battery Charger w/o Power Cable for New DSP Family | 1 | |
| TRI-LKG-MMC-1 | TRI-LKG-MMC-1;MMC-1 Mini Mobile Charger for Seeker X - 12VDC vehicle adapter fast charger | 1 | |
| TRI-LKG-PWR-ADPT-TX | TRI-LKG-PWR-ADPT-TX;AC/DC Power Adapter - Battery Charger for Seeker HL Source Transmitter | 1 | |
| TS 1176-10 | LOWER AFT WING NUT TORQUEWRENCH ADAPTER (FOR INTERNAL/EXTERNAL WRENCHING NUT) | 1 | |
| TS1171 | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 2 | |
| TS1171 (SN# L20843, TOOL CODE # D928) | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 1 | |
| TS1171-10 | WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH | 1 | |
| TS1171-2 | WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH | 1 | |
| TS1171-6 | WING BOLT NUT TORQUE ADAPTER 13/16" EXT. WRENCH | 1 | |
| TS1171-8 | WING BOLT NUT TORQUE ADAPTER 3/4" EXT. WRENCH | 1 | |
| TS1176-10 | WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH | 1 | |
| TS1176-11 | TORQUE WRENCH ADAPTER UPR AND LWR AFT ATTACH POINT | 2 | |
| TS1176-2 | WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH | 2 | |
| TS1176-6 | WING BOLT NUT TORQUE ADAPTER 13/16" EXT. WRENCH | 2 | |
| TS1176-7 | WING BOLT NUT TORQUE ADAPTER 25/32" EXT. WRENCH | 1 | |
| TS1176-8 | WING BOLT NUT TORQUE ADAPTER 3/4" EXT. WRENCH | 1 | |
| TS120R121A | NACA VENT DRAIN ADAPTER (LEFT) | 1 | |
| TS120R122A | NACA VENT DRAIN ADAPTER (RIGHT) | 1 | |
| TS1222-2 | WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH | 1 | |
| TSF734102011 | INLET ADAPTER ASSY AAR KIT | 1 | |
| TSFFAD48HTST28Z007 | FUEL DRAIN SUMP ADAPTER KIT | 1 | |
| TSFFAD48HTST28Z040 | CENTER TANK SUMPING ADAPTER KIT | 1 | |
| TSFFAD48HTST28Z041 | BOTTOM PRESSURE TEE ADAPTER KIT | 1 | |
| TSFFT1U2800-14 | Test support fixture 747-8 jettison tube hose adapter assy | 1 | |
| U01A070000 | JACK ADAPTER NLG | 1 | |
| U01A070000D | NLG JACK ADAPTER DO 228 | 1 | |
| U02A070000D | MLG JACK ADAPTER DO228 | 1 | |
| U14A320000A | MANOMETER MIT ADAPTER (0-3500 PSI) | 1 | |
| UL14228 | INHIBITING RIG ADAPTER TOOL | 1 | |
| USB-232-1 | USB TO RS232 ADAPTER / CONVERTER | 1 | |
| V25SH-0108(P) | TEST ADAPTER FOR PRESSURE | 1 | |
| V25SH-0109(F) | TEST ADAPTER FOR FLOW | 1 | |
| V2SH-0110(F) | TEST ADAPTER FOR FLOW | 1 | |
| V2SH-0110(P) | TEST ADAPTER FOR PRESSURE | 1 | |
| V2SH-0114 | TEST ADAPTER | 1 | |
| V798-002 | COUPLING ADAPTER BOT | 1 | |
| VG12 | A320 WHEEL CHARGING ADAPTER VG12 | 1 | |
| VIBREX 2000 F | VIBREX 2000 F (FRENCH) WITH ADAPTER KIT CHADWICK EC 130V2K OR VIBREX 2000 F (ENGLISH) WITH ADAPTER KIT CHADWICK EC 130V2K OR CHADWICK 8500C WITH ADAPTER KIT CHADWICK EC 130V2K | 1 | |
| VP-60 | VP-60;Optical Power Meter - with 2.5mm Adapter - Software | 1 | |
| VPP-UPP16 | VPP-UPP16;SmartClass Fiber OPM UPP Adapter 1.6mm | 1 | |
| VPP-UPP20 | VPP-UPP20;SmartClass Fiber OPM UPP Adapter 2.0mm | 1 | |
| WBS-33110 | Torque Adapter Wrench | 2 | |
| WBS-33111 | Torque Adapter Wrenh | 2 | |
| WBS-33111-1 | TORQUE ADAPTER WRENCH | 1 | |
| WBS-33111-2 | TORQUE ADAPTER WRENCH | 1 | |
| WBS-33111-3 | TORQUE ADAPTER WRENCH | 1 | |
| WBS-34356 | Torque Adapter Wrench | 1 | |
| WBS-34357 | Torque Adapter Wrench | 1 | |
| WBS-34358 | Torque Adapter Wrench | 1 | |
| WBS-34743 | Torque Adapter Wrench | 1 | |
| WBS-37426 | Torque Adapter | 1 | |
| WBS3311 | TORQUE ADAPTER WRENCH | 1 | |
| WBS33110 | TORQUE ADAPTER WRENCH | 2 | |
| WBS33111 | TORQUE ADAPTER WRENCH | 2 | |
| WCI-1700-OAJ-0623F | FTI OFFSET ADAPTER FLUSH NOSECAP | 1 | |
| WCI-1700-OAJ-1001F | FTI OFFSET ADAPTER FLUSH NOSECAP | 2 | |
| WCI-1700-OAJ-1401S | OFFSET ADAPTER JAWSET | 1 | |
| WCI-1700-OAJ-1423S | OFFSET ADAPTER JAWSET | 1 | |
| WCI-1700-ONE-0601-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
| WCI-1700-ONE-0623-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 2 | |
| WP-N-GN | OREI Universal 2 in 1 Plug Adapter Type N for Brazil High Quality CE Certified-RoHS Compliant WP-N-GN | 1 | |
| WR-2006907X101-1-1 | WRENCH ADAPTER - NOSE WHEEL STEERING | 1 | |
| WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
| WSPL 2 | JACKING ADAPTER COLUMBUS | 1 | |
| WSPL 3 | ATR JACKING ADAPTER HYDRO MODEL 1708B2D1801BO | 1 | |
| WSS4AK350 | WSS4- ADAPTER KIT HYD | 1 | |
| X200948408 | IDG FLUSHING ADAPTER KITS - B1-B INPUT/OUTPUT FLUSH ADAPTERS | 1 | |
| XL4TM61105FG | 3D PHASE MEAS. TIP ADAPTER (BLACK) INCL. CALIBRATION | 5 | |
| XLG3TM615050SG | STEREO MEAS. TIM ADAPTER (BLUE) INCL. CALIBRATION | 3 | |
| XLG3TM616060FG | STEREO MEAS. TIM ADAPTER (BLACK) INCL. CALIBRATION | 3 | |
| XLGOAAUTOC | XLGO AUTO CHARGER (12V DC AUTO ADAPTER FOR XL GO) | 1 | |
| Y260 | CRIMP TOOL, ADAPTER (FOR COAX) | 3 | |
| YA8005-14 | 6PC ADAPTER SET | 1 | |
| Z-1063-13 | TIRE ADAPTER RING-MAIN | 6 | |
| Z-1063-15 | TIRE ADAPTER RING, MAIN | 3 | |
| Z-1063-16 | TIRE ADAPTER RING, MAIN | 2 | |
| Z-1063-17 | TIRE ADAPTER RING | 6 | |
| Z-1063-18 | BEAD BREAKER ADAPTER RINGS | 3 | |
| Z-1063-19 | MAIN WHEEL ADAPTER RING | 5 | |
| Z-1064-13 | TIRE ADAPTER RING, NOSE | 3 | |
| Z-1064-16 | TIRE ADAPTER RING, MAIN | 3 | |
| Z-2639 | MAIN ADAPTER ASSEMBLY | 4 | |
| Z-2641 | NOSE ADAPTER ASSEMBLY | 2 | |
| Z-3072-20 | MAIN TIRE ADAPTER RING (30X9.00-15) | 3 | |
| Z-3275 | Kit, Nose Adapter Assembly | 1 | |
| Z1063-11 | NOSE TYRE ADAPTER RING | 3 | |
| Z1063-17 | MAIN TYRE ADAPTER RING | 6 | |
| Z72-006 | ADAPTER, HMU IDLER ADAPTER CHECK | 1 | |
| ZA1312NA12 | MAINS ADAPTER 12V/1,5A | 1 | |
| ZA2690UK | DS ADAPTER CABLE, 10 TO 30VDC, 12V/0,25A | 1 | |
| Z−1063−17 | Main Wheel Adapter Ring | 6 | |
| Z−1064−13 | Nose Wheel Adapter Ring | 3 | |
| f 70336-1 | Torque Wrench Adapter Manual Stabilizer Wheel | 22 | |
| f 80176-1 | Torque Wrench Adapter Manual Stabilizer Wheel | 5 | |
| f70336-1 | Torque Wrench Adapter Manual Stabilizer Wheel | 22 | |
| f80176-1 | Torque Wrench Adapter Manual Stabilizer Wheel | 5 | |
| k21016-129 | LCSS ADAPTER KIT | 10 | |
| lC6344 | TORQUE ADAPTER SET AIR TUBE COUPLING FMF LM2500 | 1 | |
| lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 2C14649 | ADAPTER - CORE ENGINE MONITORING | 1 | |
| 801308-S58-2 | VALVE INLET TEST ADAPTER | 1 | |
| 803213-S58-1 | REGULATOR TEST ADAPTER | 1 | |
| H46831 | NLG BARREL NUT R/I ADAPTER | 11 | |
| 68D110031-1001 | LOX CONVERTER VENT ADAPTER TUBE CONNECTING ADAPTER | 1 | |
| В28002-1 | HOSE ADAPTER - SUMP FUEL DRAIN | 1 | |
| 6796644 | TURBINE ADAPTER | 2 | |
| 1C6364G02 | TORQUE ADAPTER - FORWARD ADAPTER, COUPLING NUT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
