Part Number: T-204

T-204

BENCH VISE FOR AMSS

Stock Qty at Aviapool: 0

Our Sources: 0




Partial Matches:

If the above item is not what you are looking for, below are other partial matches to the number you entered. Please note we only display a maximum of 200 partial matches.
Part Number
Partial Description Match
In Stock
Our Sources
For Aircraft*
Photos
Add to Request
AFNDT-2040/.063-.140
AFNDT-2040/.063-.140
Description:  CUSTOM TEST BLOCK +/-.0004 TOL. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2040/.100-.600
AFNDT-2040/.100-.600
Description:  CUSTOM TEST BLOCK +/-.0004 TOL. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2040AL
AFNDT-2040AL
Description:  4 STEP WEDGE. Material: 2024-T351 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, +/-0.05mm Pad Size: 19mm x 19mm. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2041/2024-T3
AFNDT-2041/2024-T3
Description:  5 STEP WEDGE 2024-T351, Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, +/-0.05mm Pad Size: 25mm x 25mm. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2041/AL
AFNDT-2041/AL
Description:  5 STEP WEDGE 7075-T6 ALUMINUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORT
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2041/AL-1
AFNDT-2041/AL-1
Description:  5 STEP WEDGE 2024-T3 ALUMINUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.** (0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm). IncludesTest Report Traceable to NIST and Certificate of
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2041/ST
AFNDT-2041/ST
Description:  5 STEP WEDGE 4340 steel:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORTS
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2041/TI
AFNDT-2041/TI
Description:  5 STEP WEDGE 6al-4v TITANIUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORTS
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2042/AL
AFNDT-2042/AL
Description:  CUSTOM 5 HOLE REFERENCE STANDARD MADE OF 7075-T6 ALUMINUM WITH (0.5mm X 0.5mm +/- .05mm) CORNER EDM FLAWS. HOLE SIZE : 13/64", 19/64", 23/64", 7/16" & 31/64". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2043/718
AFNDT-2043/718
Description:  AIR FORCE GENERAL PURPOSE REFERENCE STANDARD INCONEL 718 ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Manufactured per IAW U.S.A.F. Tech Order 33B-1-1 AIR FORCE P/N:(7947479-10). 6635-01-512-4953
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2043/A
AFNDT-2043/A
Description:  AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 7075-T6,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. AIR FORCE P/N:(7947479-10) NSN: 6635-01-092-5129. Includes Certification Report Traceable to NIST and Certificate of conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2043/S
AFNDT-2043/S
Description:  AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 4340 STEEL ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. AIR FORCE P/N:(7947479-10)..6635-01-512-4952
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2043/SS
AFNDT-2043/SS
Description:  AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 304 STAINLESS STEEL ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. AIR FORCE P/N:(7947479-10)...6635-01-548-6659
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2043/TI
AFNDT-2043/TI
Description:  AIR FORCE GENERAL PURPOSE REFERENCE STANDARD 6AL-4V TITANIUM ,20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Manufactured per IAW U.S.A.F. Tech Order 33B-1-1 AIR FORCE P/N:(7947479-10). 6635-01-390-1768
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2044/15-5
AFNDT-2044/15-5
Description:  Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also...
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2044/304
AFNDT-2044/304
Description:  Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also...
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2044/718
AFNDT-2044/718
Description:  Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2044/Ti
AFNDT-2044/Ti
Description:  Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also...
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2044AL
AFNDT-2044AL
Description:  Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also...
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2044S
AFNDT-2044S
Description:  Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also...
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2046/AL
AFNDT-2046/AL
Description:  15 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 15 EDM NOTCHES .030X.030 CORNER TOP. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2046/TI
AFNDT-2046/TI
Description:  15 HOLE REFERENCE STANDARD 6AL4V 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 15 EDM NOTCHES .030X.030 CORNER. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2047TI
AFNDT-2047TI
Description:  4 STEP WEDGE. PAD SIZE 20mm X 20mm. STEP SIZES: 0.6mm, .2mm, 3mm, 4mm +/- .05mm. MATERIAL 6AL-4V
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/17-4
AFNDT-2048/17-4
Description:  CUSTOM NAVY BLOCK. MATERIAL: 17-4PH STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/17-7
AFNDT-2048/17-7
Description:  CUSTOM NAVY BLOCK. MATERIAL: 17-7PH STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/2024-T3
AFNDT-2048/2024-T3
Description:  CUSTOM NAVY BLOCK. MATERIAL: 2024-T6 ALUMINUM CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/304
AFNDT-2048/304
Description:  CUSTOM NAVY BLOCK. MATERIAL: 304 STAINLESS STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/400
AFNDT-2048/400
Description:  CUSTOM NAVY BLOCK. MATERIAL: 400 STAINLESS STEEL. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/7075T6
AFNDT-2048/7075T6
Description:  CUSTOM NAVY BLOCK. MATERIAL: 7075-T6 ALUMINUM CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/718
AFNDT-2048/718
Description:  CUSTOM NAVY BLOCK. MATERIAL: 718 INCONEL CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/AMS-6526
AFNDT-2048/AMS-6526
Description:  CUSTOM NAVY BLOCK. MATERIAL: PER AMS-6526 NICKEL COBALT STEEL ,CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/AST
AFNDT-2048/AST
Description:  CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. Includes Custom fit Waterproof Case. Includes Test Rep...
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/AST/CASE
AFNDT-2048/AST/CASE
Description:  CUSTOM NAVY BLOCK SET, 3 BLOCKS 7075-T6, 4340, 6AL-4V ,WITH 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES NOTCHES,( WITH CASE). Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/ST
AFNDT-2048/ST
Description:  CUSTOM NAVY BLOCK. MATERIAL: 4340 CRES STEEL CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2048/TI
AFNDT-2048/TI
Description:  CUSTOM NAVY BLOCK, 6AL-4V TITANIUM ,WITH 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES NOTCHES. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2049/4130
AFNDT-2049/4130
Description:  GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2049/4340
AFNDT-2049/4340
Description:  GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4340, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
AFNDT-2049/7075-T6
AFNDT-2049/7075-T6
Description:  GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
BAT-204NT
BAT-204NT
Description:  Hand-Operated Nibbling Tool
In stock:  0
Sources:  0
For Aircraft*:  N/A
Photos:  
*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.