| Part Number | Tool Description |
|---|
| 14001 | 0XKR24 Calibrate | 12PT 3/4IN STUB RAT COM WR Calibrate |
| 14002 | 0XKR707 Calibrate | 12-POINT SAE FLANK DRIVE® 0° OFFSET SHORT RATCHETING COMBINATION WRENCH SET (3/8-3/4") Calibrate |
| 14003 | 0XKR707 Calibrate | SET, WRENCH, COMBINA Calibrate |
| 14004 | 0XR10 Calibrate | TOOL Calibrate |
| 14005 | 0XR12 Calibrate | TOOL Calibrate |
| 14006 | 0XR14 Calibrate | TOOL Calibrate |
| 14007 | 0XR16 Calibrate | TOOL Calibrate |
| 14008 | 0XR18 Calibrate | TOOL Calibrate |
| 14009 | 0XR22 Calibrate | TOOL Calibrate |
| 14010 | 0XR24 Calibrate | TOOL Calibrate |
| 14011 | 0XR26 Calibrate | TOOL Calibrate |
| 14012 | 0XR28 Calibrate | TOOL Calibrate |
| 14013 | 0XR30 Calibrate | TOOL Calibrate |
| 14014 | 0XR32 Calibrate | TOOL Calibrate |
| 14015 | 0XR707A Calibrate | SAE FLANK DRIVE® NON-REVERSIBLE RATCHETING COMBINATION WRENCH SET (3/8-3/4") Calibrate |
| 14016 | 0XR8 Calibrate | TOOL Calibrate |
| 14017 | 1 Calibrate | MAGNETIC RETRIEVER SENIOR MAGIMMICK Calibrate |
| 14018 | 1 10TMDY Calibrate | USATCO SLEEVE (10 PIECES/SET) Calibrate |
| 14019 | 1_837_69-0038 Calibrate | AIRBUS INSPECTION HFEC KIT Calibrate |
| 14020 | 1-00420-90 Calibrate | GUIDE TUBE KIT Calibrate |
| 14021 | 1-100-04-2-2 Calibrate | 4" HAND,WITH HANDLE,CUT 2 Calibrate |
| 14022 | 1-102312 Calibrate | Hatch Safety Cover B747 Calibrate |
| 14023 | 1-1041-14 Calibrate | TRAMITTER FUEL GAUGE Calibrate |
| 14024 | 1-13858 Calibrate | RIVET- GOLD Calibrate |
| 14025 | 1-1490413-3 Calibrate | SOLIS HD 1/0AWG NEST Calibrate |
| 14026 | 1-1901600-1 Calibrate | DIE Calibrate |
| 14027 | 1-1901611-1 Calibrate | CERTI-CRIMP HAND TOOL Calibrate |
| 14028 | 1-1KIT Calibrate | 11 PIECE 90 DEGREE DRILL ATTACHMENT KIT Calibrate |
| 14029 | 1-210-06-1-2 Calibrate | 6 INCH HALF ROUND FILE Calibrate |
| 14030 | 1-210-06-2-2 Calibrate | 6" FILE HALF ROUND CUT 2 W/HANDLE Calibrate |
| 14031 | 1-21046-3 Calibrate | RETAINING RING, DIE SET Calibrate |
| 14032 | 1-230-04-2-2 Calibrate | 4" ROUND,WITH HANDLE,CUT 2 Calibrate |
| 14033 | 1-230-06-2-2 Calibrate | 6" FILE ROUND CUT 2 W/HANDLE Calibrate |
| 14034 | 1-25309 Calibrate | ANVIL, FLAT HEAD Calibrate |
| 14035 | 1-25310 Calibrate | ROUND HEAD DRIVER Calibrate |
| 14036 | 1-25311 Calibrate | FLATHEAD ANVIL _ 2 3 1-25311 SWAGING PIN Calibrate |
| 14037 | 1-30100-0001 Calibrate | HY-LITE 2 LUMINOMETER Calibrate |
| 14038 | 1-30100-0221 Calibrate | HY LITE 2 LUMINOTER Calibrate |
| 14039 | 1-30100-0301 Calibrate | HY-LITE FUEL TESTER Calibrate |
| 14040 | 1-30196-0021 Calibrate | FUEL CONTAMINATION Calibrate |
| 14041 | 1-3041 Calibrate | WASHER FLAT 1/4 Calibrate |
| 14042 | 1-305183-1 Calibrate | EXTRACT TOOL MATE-N-LOK P Calibrate |
| 14043 | 1-305183-2 Calibrate | EXTRACT TOOL MATE-N-LOK SKT Calibrate |
| 14044 | 1-306027-0 Calibrate | SPACER Calibrate |
| 14045 | 1-44329 Calibrate | gauge GO-NOGO Calibrate |
| 14046 | 1-45-686 Calibrate | TRY SQUARE 300X200MM - STANLEY Calibrate |
| 14047 | 1-473-10-2-2 Calibrate | ERGO™ ENGINEERING FILE SET SECOND CUT 250 MM - 3 P Calibrate |
| 14048 | 1-476-04-3-2 Calibrate | 4" KEY FILES WITH HANDLES 6PCS Calibrate |
| 14049 | 1-480416-0 Calibrate | HOUSING - RECEPTACLE Calibrate |
| 14050 | 1-500351-00 Calibrate | AIR MOVER Calibrate |
| 14051 | 1-500421-00 Calibrate | "COPPUS" JECTAIR 3HP HORNET Calibrate |
| 14052 | 1-525441-1 Calibrate | PLUG GAUGE, HANDTOOL Calibrate |
| 14053 | 1-525441-2 Calibrate | WIRE PLUG GAUGE 6 AWG Calibrate |
| 14054 | 1-525441-3 Calibrate | PLUG GAUGE HANDTOOL Calibrate |
| 14055 | 1-525441-4 Calibrate | GAUGE GO / NO GO Calibrate |
| 14056 | 1-525441-5 Calibrate | WIRE PLUG GAUGE 8 AWG Calibrate |
| 14057 | 1-525441-6 Calibrate | WIRE PLUG GAUGE 4 AWG Calibrate |
| 14058 | 1-525441-7 Calibrate | WIRE PLUG GAUGE 2 AWG Calibrate |
| 14059 | 1-525441-8 Calibrate | WIRE PLUG GAUGE 6 AWG Calibrate |
| 14060 | 1-525441-9 Calibrate | WIRE PLUG GAUGE 8 AWG Calibrate |
| 14061 | 1-525442-9 Calibrate | GAUGE Calibrate |
| 14062 | 1-528013-1 Calibrate | FFC PISTOL GRIP HAND TOOL CASE Calibrate |
| 14063 | 1-539634-9 Calibrate | CRIMPING DIE ASSEMBLY / TE CONNECTIVITY / AMP Calibrate |
| 14064 | 1-54-732 Calibrate | BALL PEIN HAMMER 32OZ Calibrate |
| 14065 | 1-59909-5 Calibrate | HOSE Calibrate |
| 14066 | 1-601967-5 Calibrate | POSITIONER TYPE II CONTACTS Calibrate |
| 14067 | 1-601967-6 Calibrate | POSITIONER TYPE II CONTACTS Calibrate |
| 14068 | 1-6390 -A Calibrate | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED Calibrate |
| 14069 | 1-6390-A Calibrate | 184 APPROVED Calibrate |
| 14070 | 1-6390A Calibrate | TOOL - SEALANT REMOVAL, BAC5000, PSD 6-184 APPROVED Calibrate |
| 14071 | 1-65-413 Calibrate | SCREWDRIVER FM S/D INSULATED SLOTTED 5.5 X150MM Calibrate |
| 14072 | 1-71219 Calibrate | FORM TOOL Calibrate |
| 14073 | 1-837-69-0038 Calibrate | AIRBUS HFEC INSPECTION KIT Calibrate |
| 14074 | 1-853400-0 Calibrate | MOD PLUG CAT 5 DIESET Calibrate |
| 14075 | 1-95982 Calibrate | Hatch Safety Cover B767 Calibrate |
| 14076 | 1-A Calibrate | MAGNOLIA BRUSH 1-A SILVER 38 HORSE HAIR HEAD X 6 T Calibrate |
| 14077 | 1-AM1551B Calibrate | PNEUMATIQUE ANGLE DRILS Calibrate |
| 14078 | 1.02.10.035-7K Calibrate | REAMER, ADJUSTABLE Calibrate |
| 14079 | 1.0625-16 UNJ-3B-TAP Calibrate | UNJ-3B-TAP Calibrate |
| 14080 | 1.0625-16UNJ-3B Calibrate | THREAD PLUG TAP Calibrate |
| 14081 | 1.1875 – 16 UNJ-3A Calibrate | DIE AND TAP SET Calibrate |
| 14082 | 1.30100.0001 Calibrate | HY-LITE 2 LUMINOMETER Calibrate |
| 14083 | 1.30100.0221 Calibrate | ATP METER HI-LITE 2 Calibrate |
| 14084 | 1.30100.0301 Calibrate | HY-LITE 2 ILLUMINOMETER (INSTRUMENT) Calibrate |
| 14085 | 1.30196.0021 Calibrate | FUEL TEST KIT HY-LITE QTY: 1 EA Calibrate |
| 14086 | 1.30890.0022 Calibrate | TOOL Calibrate |
| 14087 | 1.314.0000 Calibrate | UAS-UNIVERSAL ASSEMBLY AND DISASSEMBLY STAND Calibrate |
| 14088 | 1.837.69-0038 Calibrate | AIRBUS HFEC INSPECTION KIT Calibrate |
| 14089 | 1/4 BSP Female Bayonet Connecters (2 pack) Calibrate | 1/4 BSP Female Bayonet Connecters (2 pack) Calibrate |
| 14090 | 1/4 BSP Female Quick Couplers (2 pack) Calibrate | 1/4 BSP Female Quick Couplers (2 pack) Calibrate |
| 14091 | 1/4 BSP Male Bayonet Connecters (2 pack) Calibrate | 1/4 BSP Male Bayonet Connecters (2 pack) Calibrate |
| 14092 | 1/4 BSP Male Quick Couplers (2 pack) Calibrate | 1/4 BSP Male Quick Couplers (2 pack) Calibrate |
| 14093 | 1/4 Right Angle Head Drill Calibrate | 1/4 Right Angle Head Drill Calibrate |
| 14094 | 1/4 X 28 UNJF Calibrate | TAPER TAP HSS Calibrate |
| 14095 | 1/4-28 Calibrate | KIT HELI-COIL Calibrate |
| 14096 | 1/4-28UNF X 7/8" Calibrate | CAP SCREW Calibrate |
| 14097 | 1/4COB-12 Calibrate | 1/4" COBALT AIRCRAFT EXTENSION DRILL BIT - 12" Calibrate |
| 14098 | 1/4HSS-12 Calibrate | 1/4 HIGH SPEED STEEL AIRCRAFT EXTENSION DRILL BI Calibrate |
| 14099 | 1/4MRO-SS Calibrate | TEE-PARKER MALE RUN TEE Calibrate |
| 14100 | 1/8 FG-SS Calibrate | TOOL Calibrate |
| 14101 | 1/8COB-12 Calibrate | 1/8" COBALT AIRCRAFT EXTENSION DRILL BIT - 12" Calibrate |
| 14102 | 1/8COB-6 Calibrate | 6" DRILL COBALT EXTENSION 1/8 Calibrate |
| 14103 | 1/8HSS-6 Calibrate | 1/8 HIGH SPEED STEEL AIRCRAFT EXTENSION DRILL BI Calibrate |
| 14104 | 10 Calibrate | NDT ULTRASONIC FLAW DETECTOR Calibrate |
| 14105 | 10 3641 Calibrate | FISH POLES Calibrate |
| 14106 | 10 4069 Calibrate | SHACKLE ASSY Calibrate |
| 14107 | 10 XHBU-SS Calibrate | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH Calibrate |
| 14108 | 10-0-N Calibrate | 10-0-N COLD WORKING KIT Calibrate |
| 14109 | 10-001 Calibrate | THREADED SHANK ADAPTER DRILLS Calibrate |
| 14110 | 10-003 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 14111 | 10-00400A Calibrate | HAND PUMP ASSY Calibrate |
| 14112 | 10-008 Calibrate | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-008 Calibrate |
| 14113 | 10-010 Calibrate | #10 ANGLE BIT 956D COBALT LONG Calibrate |
| 14114 | 10-01021 Calibrate | LIGHT READING TACHOMETER (TO VERIFY TACHOMETER READINGS) (AIRCRAFT TOOL & SUPPLY, E.G. 310B) Calibrate |
| 14115 | 10-0108-00 Calibrate | CALIBRAITIONBLOCKCALIBRATIONCALIBRATION Calibrate |
| 14116 | 10-0109-00 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, INCONEL 718, 3 EDM SLOTS (0.2MM, 0.5MM,1.0MM DEEP) Calibrate |
| 14117 | 10-011 Calibrate | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-011 Calibrate |
| 14118 | 10-013 Calibrate | #13 ANGLE BIT 956D COBALT LONG Calibrate |
| 14119 | 10-014 Calibrate | #14 SHORT SERIES THREADED DRILL BIT Calibrate |
| 14120 | 10-016 Calibrate | #16 ANGLE BIT 956D COBALT LONG Calibrate |
| 14121 | 10-020 Calibrate | #20 ANGLE BIT 956D COBALT LONG Calibrate |
| 14122 | 10-02065 Calibrate | RAPCO BRAKE RIVET TOOL RA825 Calibrate |
| 14123 | 10-021 Calibrate | #21 ANGLE BIT 956D COBALT LONG Calibrate |
| 14124 | 10-023 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14125 | 10-028 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14126 | 10-030 Calibrate | THREADED DRILL BIT - SHORT - #30 Calibrate |
| 14127 | 10-031 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14128 | 10-036 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14129 | 10-040 Calibrate | THREADED DRILL BIT - SHORT - #40 Calibrate |
| 14130 | 10-04230 Calibrate | SIRS LANDING COMPASS Calibrate |
| 14131 | 10-04231 Calibrate | SIRS NON MAGNETIC TRIPOD Calibrate |
| 14132 | 10-04232 Calibrate | COMPASS KIT Calibrate |
| 14133 | 10-046 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14134 | 10-04816 Calibrate | COMPASS Calibrate |
| 14135 | 10-04817 Calibrate | LANDING COMPAS Calibrate |
| 14136 | 10-051 Calibrate | THREADED SHANK ADAPTER DRILLS #51 Calibrate |
| 14137 | 10-052 Calibrate | THREADED SHANK ADAPTER DRILLS #52 Calibrate |
| 14138 | 10-053 Calibrate | THREADED SHANK ADAPTER DRILLS #53 Calibrate |
| 14139 | 10-05357 Calibrate | BARFIELD SIGHT CALIBRATION COMPASS Calibrate |
| 14140 | 10-054 Calibrate | THREADED SHANK ADAPTER DRILLS #54 Calibrate |
| 14141 | 10-055 Calibrate | THREADED SHANK ADAPTER DRILLS #55 Calibrate |
| 14142 | 10-056 Calibrate | THREADED SHANK ADAPTER DRILLS #56 Calibrate |
| 14143 | 10-057 Calibrate | THREADED SHANK ADAPTER DRILLS #57 Calibrate |
| 14144 | 10-058 Calibrate | THREADED SHANK ADAPTER DRILLS #58 Calibrate |
| 14145 | 10-059 Calibrate | THREADED SHANK ADAPTER DRILLS #59 Calibrate |
| 14146 | 10-060 Calibrate | THREADED SHANK ADAPTER DRILLS #60 Calibrate |
| 14147 | 10-06444 Calibrate | RC ALLEN 2610-3P DIGITAL ATTITUDE INDICATOR 0 DEGREE TILT Calibrate |
| 14148 | 10-06598 Calibrate | NEW TEMPEST TORNADO AA3225CC Calibrate |
| 14149 | 10-06845 Calibrate | JPI 3.25 EDM 350 4 CYL FULL PACKAGE Calibrate |
| 14150 | 10-07797A Calibrate | BLADE CLAMP KIT Calibrate |
| 14151 | 10-099 Calibrate | RETRACTABLE UTILITY KNIFE Calibrate |
| 14152 | 10-0N Calibrate | COLDWORKING KIT 10-0N Calibrate |
| 14153 | 10-1-N Calibrate | COLD WORKING KIT Calibrate |
| 14154 | 10-100-0196 Calibrate | MOUNT ASSY, PHOTOTACH COWLING Calibrate |
| 14155 | 10-100-0369 Calibrate | MOUNT SWIVEL LASETACH Calibrate |
| 14156 | 10-100-0479 Calibrate | MOUNT Calibrate |
| 14157 | 10-100-0550 Calibrate | MODEL 550 TRACKER Calibrate |
| 14158 | 10-100-1300 Calibrate | TACHMETER OPTICAL LASERTACH Calibrate |
| 14159 | 10-100-1773 Calibrate | TACHOMETER OPTICAL PHOTOTACH Calibrate |
| 14160 | 10-100-2020HR Calibrate | DYNAMICBALANCINGINSTRUMENT Calibrate |
| 14161 | 10-10001 Calibrate | BOWERS GRANITE TABLE 900X600X100MM GRADE 0 Calibrate |
| 14162 | 10-10002 Calibrate | CLAMP Calibrate |
| 14163 | 10-10013 Calibrate | BOWERS GRANITE TABLE 1200X900X150MM GRADE 0 Calibrate |
| 14164 | 10-1002 Calibrate | STARTER STRAP Calibrate |
| 14165 | 10-1019-50-81 Calibrate | PLUG SHUNT - FIRE EXTINGUISHER CARTRIDGE, HTL Calibrate |
| 14166 | 10-101950-081 Calibrate | ADAPTOR-CHARGING,PITOT PROBE Calibrate |
| 14167 | 10-101950-81 Calibrate | ADAPTOR-CHARGING,PITOT PROBE Calibrate |
| 14168 | 10-10321 Calibrate | BOWERS ANGLE PLATE WEBBED 150X75X100MM GRADE B Calibrate |
| 14169 | 10-1070 Calibrate | TR CS SLVR BRIT 18.87 KRL1201 Calibrate |
| 14170 | 10-1119-11 Calibrate | LIGHT,EMERGENCY-COCKPIT Calibrate |
| 14171 | 10-123T Calibrate | FLOODLIGHT Calibrate |
| 14172 | 10-1380 Calibrate | WIDE TRIM KRA62D Calibrate |
| 14173 | 10-140 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 14174 | 10-15500 Calibrate | 2716A - SCOTT TYPE FREE AIR OAT GAUGE Calibrate |
| 14175 | 10-16-90005 Calibrate | SERVICE CABLE Calibrate |
| 14176 | 10-180-907U Calibrate | 12"/300MM COMBINATION SQUARE MITUTOYO Calibrate |
| 14177 | 10-189002-20F Calibrate | SOCKET Calibrate |
| 14178 | 10-194-9 Calibrate | INSPECTION GAUGE BALL SETS (TYPE: INCH) Calibrate |
| 14179 | 10-2-N Calibrate | COLD WORKING KIT Calibrate |
| 14180 | 10-203 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 14181 | 10-208 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 14182 | 10-210 Calibrate | DRILL BIT #10 Calibrate |
| 14183 | 10-213 Calibrate | #13 LONG SERIES THREADED DRILL BIT Calibrate |
| 14184 | 10-216 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14185 | 10-220 Calibrate | THREADED DRILL BIT - LONG - #20 Calibrate |
| 14186 | 10-221 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 14187 | 10-223 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14188 | 10-228 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14189 | 10-230 Calibrate | #30 ANGLE BIT 956D COBALT LONG Calibrate |
| 14190 | 10-231 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14191 | 10-234-1 Calibrate | RETAINING RING Calibrate |
| 14192 | 10-234501-000 Calibrate | JACK ADAPTER PAD Calibrate |
| 14193 | 10-236 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14194 | 10-240 Calibrate | #40 ANGLE BIT 956D COBALT LONG Calibrate |
| 14195 | 10-246 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 14196 | 10-251 Calibrate | GC ELECTRONICS 10-251 HORSE HAIR 38 WIDE & 6 LO Calibrate |
| 14197 | 10-3-N Calibrate | COLD WORK KIT Calibrate |
| 14198 | 10-3-N FTI Calibrate | COLD WORKING TOOL 10-3-N Calibrate |
| 14199 | 10-300-0048 Calibrate | MANUAL ACES GUIDE TO PROP BALANCING -3X699 Calibrate |
| 14200 | 10-300-4041-1 Calibrate | PRINTED VIPER II QUICK START GUIDE (ENGLISH) Calibrate |
