| Part Number | Tool Description |
|---|
| 12201 | 100 Calibrate | DOTCO® PRECISION COLLETS CAPACITY: 1/8 SIZE/D Calibrate |
| 12202 | 100 H Calibrate | ELEMENT - PLUG-IN Calibrate |
| 12203 | 100-0128-04 Calibrate | DRAIN EQUIPMENT, SURGE TANK SUMP Calibrate |
| 12204 | 100-0128-04 Calibrate | FUEL DRAIN TOOL Calibrate |
| 12205 | 100-0128-04 Calibrate | FUEL DRAINING KIT 737 Calibrate |
| 12206 | 100-0211-03 Calibrate | AIRCRAFT BATTERY CHARGER Calibrate |
| 12207 | 100-1 Calibrate | HOIST, LIGHT WEIGHT - TAPE Calibrate |
| 12208 | 100-200-002 Calibrate | DATA BUS TESTER Calibrate |
| 12209 | 100-25IP Calibrate | B787 DRILL BITS Calibrate |
| 12210 | 100-2605-01 Calibrate | TOOL-ADJ,CDSS Calibrate |
| 12211 | 100-415 Calibrate | RECHARGE (PRESSURIZING) ADAPTER Calibrate |
| 12212 | 100-420 Calibrate | ADAPTER Calibrate |
| 12213 | 100-421 Calibrate | ADAPTER Calibrate |
| 12214 | 100-431 Calibrate | ADAPTER Calibrate |
| 12215 | 100-435 Calibrate | ADAPTER Calibrate |
| 12216 | 100-47856 Calibrate | EXTRACTOR BEARING Calibrate |
| 12217 | 100-49601 Calibrate | PREFORMED PACKING ASSEMBLY TOOL Calibrate |
| 12218 | 100-51127 Calibrate | IMPELLER SHAFT WRENCH Calibrate |
| 12219 | 100-52028 Calibrate | IMPELLER SHAFT NUT TOOL Calibrate |
| 12220 | 100-52754 Calibrate | FIXTURE HOLDING Calibrate |
| 12221 | 100-530-387-1 Calibrate | PARTITION COVER Calibrate |
| 12222 | 100-590031-1 Calibrate | BLEED AIR SCOOP PLUG (EFFECTIVITY: LJ-502 THRU LJ-718; LW-1 THRU LW-228) (BEECHCRAFT CORP) Calibrate |
| 12223 | 100-600-001 Calibrate | ANALYZER - DATABUS, ARINC 429/629 Calibrate |
| 12224 | 100-600-001 Calibrate | ANALYZER - DATABUS, DATATRAC Calibrate |
| 12225 | 100-600-001 Calibrate | ANALYZER - DATABUS, DATATRAC MODELS 600, 650, 650H Calibrate |
| 12226 | 100-600FT LB Calibrate | TORQUE WRENCH 3/4 DRIVE 100-600FT LB Calibrate |
| 12227 | 100-655-001 Calibrate | ANALYZER - DATABUS, ARINC 629 Calibrate |
| 12228 | 100-A Calibrate | MODEL 100-A GUN & MIXER KIT Calibrate |
| 12229 | 100.020.030 Calibrate | BALL TERMINALS Calibrate |
| 12230 | 100/1 Calibrate | LIGHTWEIGHT TAPE HOIST Calibrate |
| 12231 | 100/106 Calibrate | TOP SHEATH STRAP ASSEMBLY (DIDSBURY) Calibrate |
| 12232 | 100/114 Calibrate | LIGHT WEIGHT TAPE HOIST KIT Calibrate |
| 12233 | 1000-001-P Calibrate | AIR DATA COMPUTER Calibrate |
| 12234 | 1000-100-12 Calibrate | TOOL Calibrate |
| 12235 | 1000-100-21 Calibrate | PILOT CUTTER Calibrate |
| 12236 | 1000-100-30 Calibrate | PILOT CUTTER Calibrate |
| 12237 | 1000-100-40 Calibrate | TOOL Calibrate |
| 12238 | 1000001P Calibrate | AIR DATA COMPUTER Calibrate |
| 12239 | 1000005-001 Calibrate | TEST SET - SELCAL (115V/60HZ) Calibrate |
| 12240 | 1000005-002 Calibrate | SELCAL RAMP Calibrate |
| 12241 | 1000005-004 Calibrate | CTS-700 SYS, 110V Calibrate |
| 12242 | 1000005-005 Calibrate | CTS-700 SELCAL/ATSCALL TEST Calibrate |
| 12243 | 1000005001 Calibrate | TEST SET - SELCAL (115V/60HZ) Calibrate |
| 12244 | 1000005001 Calibrate | TEST SET - SELCAL 115V/60HZ Calibrate |
| 12245 | 1000005001 Calibrate | TESTER,SELCAL RAMP CTS-700 Calibrate |
| 12246 | 1000005002 Calibrate | SELCAL RAMP Calibrate |
| 12247 | 1000005002 Calibrate | TEST SET-SELCAL (IF INSTALLED) 220 VOLT Calibrate |
| 12248 | 1000005002 Calibrate | TEST SET-SELCAL IF INSTALLED 220 VOLT Calibrate |
| 12249 | 1000005004 Calibrate | CTS-700 SYS, 110V Calibrate |
| 12250 | 1000005004 Calibrate | SELCAL TEST SET 110V Calibrate |
| 12251 | 1000005004 Calibrate | SET, SELCAL (115 VOLT) Calibrate |
| 12252 | 1000005004 Calibrate | TEST SET - SELCAL (115V/60HZ) Calibrate |
| 12253 | 1000005004 Calibrate | TEST SET - SELCAL 110V Calibrate |
| 12254 | 1000005004 Calibrate | TEST SET - SELCAL 115V/60HZ Calibrate |
| 12255 | 1000005004 Calibrate | TEST SET, SELCAL (115 VOLT) Calibrate |
| 12256 | 1000005005 Calibrate | CTS-700 SELCAL/ATSCALL TEST Calibrate |
| 12257 | 1000005005 Calibrate | CTS-700 SELCAL/ATSCALL TEST (CALIBRATION Calibrate |
| 12258 | 1000005005 Calibrate | CTS-700 SYS, 220V Calibrate |
| 12259 | 1000005005 Calibrate | SELCAL TEST SET 220V Calibrate |
| 12260 | 1000005005 Calibrate | SET, SELCAL (220 VAC/50HZ) EUROPEAN OPER Calibrate |
| 12261 | 1000005005 Calibrate | TEST SET, SELCAL (220 VOLT 50HZ) Calibrate |
| 12262 | 10000288 Calibrate | VACLAV 2 CONVERSION KIT A320 Calibrate |
| 12263 | 10000299 Calibrate | VACLAV GROUND SERVICE UNIT Calibrate |
| 12264 | 1000030-1 Calibrate | SCREW Calibrate |
| 12265 | 10000301 Calibrate | SCREW Calibrate |
| 12266 | 10000301 Calibrate | SCREW QUAD LEAD THREAD Calibrate |
| 12267 | 100004 Calibrate | ULTRA SONIC CLEANER / CHECK RAT CHECKOUT MODULE CASE DRAIN AND PRESSURE FILTERS Calibrate |
| 12268 | 10001 Calibrate | THREADED SHANK ADAPTER DRILLS Calibrate |
| 12269 | 10001 Calibrate | DIAL INDICATOR/COMPARATOR 0-10MM Calibrate |
| 12270 | 100010012 Calibrate | TOOL Calibrate |
| 12271 | 100010021 Calibrate | PILOT CUTTER Calibrate |
| 12272 | 100010021 Calibrate | TOOL Calibrate |
| 12273 | 100010030 Calibrate | PILOT CUTTER Calibrate |
| 12274 | 100010030 Calibrate | TOOL Calibrate |
| 12275 | 100010040 Calibrate | TOOL Calibrate |
| 12276 | 100012804 Calibrate | DRAIN EQUIPMENT, SURGE TANK SUMP Calibrate |
| 12277 | 100012804 Calibrate | DRAIN EQUIPMENT, SURGE TANK SUMP&FUEL SAMPLING Calibrate |
| 12278 | 100012804 Calibrate | DRAIN TOOL Calibrate |
| 12279 | 100012804 Calibrate | EQPT Calibrate |
| 12280 | 100012804 Calibrate | EQUIP-SAMPLING Calibrate |
| 12281 | 100012804 Calibrate | EQUIPMENT - SAMPLING FUEL Calibrate |
| 12282 | 100012804 Calibrate | EQUIPMENT - SAMPLING, FUEL Calibrate |
| 12283 | 100012804 Calibrate | EQUIPMENT - SAMPLING, FUEL COM-1535 Calibrate |
| 12284 | 100012804 Calibrate | EQUIPMENT FUEL SAMPLE Calibrate |
| 12285 | 100012804 Calibrate | EQUIPMENT FUEL SAMPLING Calibrate |
| 12286 | 100012804 Calibrate | EQUIPMENT SAMPLING FUEL Calibrate |
| 12287 | 100012804 Calibrate | EQUIPMENT-SAMPLING,FUEL; Calibrate |
| 12288 | 100012804 Calibrate | FUEL DRAIN Calibrate |
| 12289 | 100012804 Calibrate | FUEL DRAIN EQUIP Calibrate |
| 12290 | 100012804 Calibrate | FUEL DRAIN EQUIPMENR Calibrate |
| 12291 | 100012804 Calibrate | FUEL DRAIN EQUIPMENT Calibrate |
| 12292 | 100012804 Calibrate | FUEL DRAIN TOOL Calibrate |
| 12293 | 100012804 Calibrate | FUEL DRAINING KIT 737 Calibrate |
| 12294 | 100012804 Calibrate | FUEL INDICATOR Calibrate |
| 12295 | 100012804 Calibrate | FUEL SAMPLING AND SUMPING EQUIPMENT Calibrate |
| 12296 | 100012804 Calibrate | FUEL SAMPLING EQUIP Calibrate |
| 12297 | 100012804 Calibrate | FUEL SAMPLING EQUIPMENT Calibrate |
| 12298 | 100012804 Calibrate | FUEL SAMPLING TOOL Calibrate |
| 12299 | 100012804 Calibrate | FUEL SUMP DRAIN TOOL Calibrate |
| 12300 | 100012804 Calibrate | FUEL SUMPING TOOL Calibrate |
| 12301 | 100012804 Calibrate | PURGER - WATER DRAIN Calibrate |
| 12302 | 100012804 Calibrate | SAMPLING, FUEL Calibrate |
| 12303 | 100012804 Calibrate | TOOL Calibrate |
| 12304 | 100012804 Calibrate | TOOL - DRAIN, FUEL SUMP Calibrate |
| 12305 | 100012804 Calibrate | TOOL EQPT Calibrate |
| 12306 | 100012804 Calibrate | TOOL SUMP DRAIN Calibrate |
| 12307 | 100012804 Calibrate | TOOL SUMP DRAIN (SEAL DYNAMICS LLC) Calibrate |
| 12308 | 100012804 Calibrate | TOOLDRAIN TOOL Calibrate |
| 12309 | 100020030 Calibrate | BALL TERMINALS Calibrate |
| 12310 | 100021103 Calibrate | AIRCRAFT BATTERY CHARGER Calibrate |
| 12311 | 10002MRMH Calibrate | MICRO-ADJUSTABLE CLICK TYPE TORQUE WRENC Calibrate |
| 12312 | 10002MRPH Calibrate | 3/8DR MICRO ADJ 150-1000 INLB Calibrate |
| 12313 | 10003 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 12314 | 10003856 Calibrate | MARKING PAINT MACHINE - NEW STRIPE Calibrate |
| 12315 | 1000400A Calibrate | HAND PUMP ASSY Calibrate |
| 12316 | 10005 Calibrate | SNAP SOC 5/32 RIVET SET Calibrate |
| 12317 | 10005050 Calibrate | MICROSTOP RB206 GAGD, IMPERIAL THREAD Calibrate |
| 12318 | 100058 Calibrate | SPRING TESTER (CALIBRABLE) Calibrate |
| 12319 | 10005805 Calibrate | GSE 474 PIN,SAFETY-CHEMICAL OXYGEN GENERATOR Calibrate |
| 12320 | 10005LDFESS Calibrate | 1 DR SIG DIAL TORQUE WR 1000FT Calibrate |
| 12321 | 10005MFRMH Calibrate | MICRO-ADJUSTABLE CLICK TYPE TORQUE WRENCHES ( SQUARE DRIVE: 1" )( TORQUE RANGE: 200-1000 FT. LBS. )( Calibrate |
| 12322 | 10006 Calibrate | SNAP SOC RIVET SET CAP 6/32 Calibrate |
| 12323 | 1000624 Calibrate | LIQUID LIGHT GUIDE CABLE 3M LONG Calibrate |
| 12324 | 10008 Calibrate | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-008 Calibrate |
| 12325 | 10008 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 12326 | 10008 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 12327 | 10008 Calibrate | MASTER MITE HEAT GUN Calibrate |
| 12328 | 10008298 Calibrate | REGULATOR OUTLET CONNECTOR 807434 OR 9700 SERIES Calibrate |
| 12329 | 10009 Calibrate | HEAT GUN 220V 50/60HZ 500W. MAX Calibrate |
| 12330 | 1000936 Calibrate | BAILEIGH MANUAL BEAD ROLLER, 22GA Calibrate |
| 12331 | 1000A Calibrate | BOEING STANDARD, 707 PT6 55-10-07 FIG10: PG48 FIG1 Calibrate |
| 12332 | 1001 Calibrate | REFERENCE STANDARDS Calibrate |
| 12333 | 1001 Calibrate | HOIST, LIGHT WEIGHT - TAPE Calibrate |
| 12334 | 1001 Calibrate | LIGHTWEIGHT TAPE HOIST Calibrate |
| 12335 | 1001-11 Calibrate | SPECIAL PURPOSE CRIMP TOOL Calibrate |
| 12336 | 1001-790 Calibrate | REFLECTOMETER Calibrate |
| 12337 | 1001-I-DTT Calibrate | 1/4IN DR DGTL TEST 10-100INLB Calibrate |
| 12338 | 10010 Calibrate | #10 ANGLE BIT 956D COBALT LONG Calibrate |
| 12339 | 10010 Calibrate | THREADED DRILL BIT - SHORT - #10 Calibrate |
| 12340 | 10010 Calibrate | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-010 Calibrate |
| 12341 | 10010 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 12342 | 10010 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 12343 | 1001021 Calibrate | TACHOMETER Calibrate |
| 12344 | 1001021 Calibrate | TRUTACH II DIGITAL TACHOMETER Calibrate |
| 12345 | 100106 Calibrate | TOP SHEATH STRAP ASSEMBLY (DIDSBURY) Calibrate |
| 12346 | 10010800 Calibrate | CALIBRATION BLOCK Calibrate |
| 12347 | 10010800 Calibrate | CALIBRATION BLOCK - ALUMINIUM LITHIUM Calibrate |
| 12348 | 10010900 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, INCONEL 718, 3 EDM SLOTS (0.2MM, 0.5MM,1.0MM DEEP) Calibrate |
| 12349 | 10010900 Calibrate | CALIBRATION BLOCK Calibrate |
| 12350 | 10010900 Calibrate | CALIBRATION BLOCK - INCONEL 718 Calibrate |
| 12351 | 10010900 Calibrate | CALIBRATION BLOCK, INCONEL Calibrate |
| 12352 | 10010900 Calibrate | CALIBRATION BLOCK, INCONEL 718 Calibrate |
| 12353 | 10010900 Calibrate | CALIBRTN Calibrate |
| 12354 | 10010900 Calibrate | HFEC CALIBRATION BLOCK FOR INCONEL 718 Calibrate |
| 12355 | 10010900 Calibrate | SURFACE STANDARD, PER AIRBUS A319/320 51-63-01, I Calibrate |
| 12356 | 10010900 Calibrate | SURFACE STANDARD, PER AIRBUS A319/320 51-63-01, IN Calibrate |
| 12357 | 10010900 Calibrate | SURFACE STANDARD, PER AIRBUS A319/320 51-63-01, INCONEL 718 Calibrate |
| 12358 | 10011 Calibrate | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-011 Calibrate |
| 12359 | 100111 Calibrate | SPECIAL PURPOSE CRIMP TOOL Calibrate |
| 12360 | 100114 Calibrate | LIGHT WEIGHT TAPE HOIST KIT Calibrate |
| 12361 | 100114 Calibrate | LIGHTWEIGHT TAPE HOIST KIT Calibrate |
| 12362 | 1001246-3 Calibrate | BLEED PRESSURE REGULATION AND SHUT Calibrate |
| 12363 | 10012463 Calibrate | BLEED PRESSURE REGULATION AND SHUT Calibrate |
| 12364 | 10012463 Calibrate | TOOL Calibrate |
| 12365 | 10013 Calibrate | #13 ANGLE BIT 956D COBALT LONG Calibrate |
| 12366 | 10013 Calibrate | THREADED SHANK ADAPTER "D' WIRE SIZE DRILL 10-013 Calibrate |
| 12367 | 10013 Calibrate | THREADED SHANK ADAPTER DRILL Calibrate |
| 12368 | 100130 Calibrate | COUNTERSINK CUTTER HSS 3/32"- 1/4" ZERO FLUTE Calibrate |
| 12369 | 100132 Calibrate | COUNTERSINK CUTTER,ZERO FLUTE 3/16 - 35/64 Calibrate |
| 12370 | 10013677-S58-1 Calibrate | TEST PLUG Calibrate |
| 12371 | 10013677-S58-4 Calibrate | TEST PLUG Calibrate |
| 12372 | 10013677-S58-5 Calibrate | TEST TOOL Calibrate |
| 12373 | 10013677S581 Calibrate | TEST PLUG Calibrate |
| 12374 | 10013677S581 Calibrate | TEST PLUG, FILL PORT Calibrate |
| 12375 | 10013677S584 Calibrate | TEST PLUG Calibrate |
| 12376 | 10013677S584 Calibrate | TEST PLUG, LOW PRESSURE OUTLET Calibrate |
| 12377 | 10013677S585 Calibrate | TEST TOOL Calibrate |
| 12378 | 10014 Calibrate | 3 1/2'' STRAIGHT & 10 DEGREES RIVET SETS Calibrate |
| 12379 | 10014 Calibrate | #14 SHORT SERIES THREADED DRILL BIT Calibrate |
| 12380 | 10015 P12-1202 Calibrate | REGULATOR ASSY Calibrate |
| 12381 | 10015P121202 Calibrate | REGULATOR ASSY Calibrate |
| 12382 | 10016 Calibrate | #16 ANGLE BIT 956D COBALT LONG Calibrate |
| 12383 | 10016 Calibrate | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) Calibrate |
| 12384 | 100161 Calibrate | MAG-LITE® FLASHLIGHTS TYPE: REPLACEMENT LAMP FOR Calibrate |
| 12385 | 10017 Calibrate | 3 1/2'' STRAIGHT & FLUSH RIVET SETS Calibrate |
| 12386 | 1001790 Calibrate | REFLECTOMETER Calibrate |
| 12387 | 10018 Calibrate | AIRCRAFT RIVET SET KIT 5 PIECE INCLUDING 1" FLUSH RIVET SET Calibrate |
| 12388 | 10019 Calibrate | 3 1/2'' OFFSET & FLUSH RIVET SETS Calibrate |
| 12389 | 1001IDTT Calibrate | 1/4IN DR DGTL TEST 10-100INLB Calibrate |
| 12390 | 1001K Calibrate | REDUCING BUCKING BAR KIT Calibrate |
| 12391 | 1002 Calibrate | BOEING REFERENCE STANDARD Calibrate |
| 12392 | 1002-1 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 3/32 , LE Calibrate |
| 12393 | 1002-11 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 5/32 , LE Calibrate |
| 12394 | 1002-11-BAC Calibrate | 5/32 BAC STYLE MODIFIED RIVET SET - 3-1/2 Calibrate |
| 12395 | 1002-12 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 5/32 , LE Calibrate |
| 12396 | 1002-13 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 5/32 , LE Calibrate |
| 12397 | 1002-14 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 5/32 , LE Calibrate |
| 12398 | 1002-16 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 3/16 , LE Calibrate |
| 12399 | 1002-16-BAC Calibrate | 3/16 BAC STYLE MODIFIED RIVET SET - 3-1/2 Calibrate |
| 12400 | 1002-19 Calibrate | .401 SHANK RIVET SET - STRAIGHT - SIZE: 3/16 , LE Calibrate |
