| Part Number | Tool Description |
|---|
| 110601 | APN-95-5 Calibrate | RIGID SURFACE PROBE, 90?? DEGREES, .500 DROP, .1 Calibrate |
| 110602 | APN-95-5 50-500KHZ Calibrate | PROBE Calibrate |
| 110603 | APN-95-5/2M Calibrate | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø SHAFT, 1-3 M HZ. WITH A 2 MHZ CENTER FREQUENCY, Calibrate |
| 110604 | APN-95-5/500K Calibrate | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø, 5.0" LONG WITH MICRODOT CONNECTOR 200 KHZ-1 MH Calibrate |
| 110605 | APN-95-6 Calibrate | PROBE Calibrate |
| 110606 | APN3 Calibrate | RIGID SURFACE PROBE 50-500KHZ 3.0" LONG WITH MICRODOT CONNECTOR. INCLUDES TEST REPORT AND CERTIFICAT Calibrate |
| 110607 | APN3 Calibrate | STRAIGHT SURFACE PROBE, Ø.125" TIP X 3" LONG, 50-500KHZ, MICRODOT Calibrate |
| 110608 | APN4 Calibrate | RIGID SURFACE PROBE STRAIGHT 50-500KHZ MICRODOT CONNECTOR 4.0" LONG. INCLUDES TEST REPORT AND CERTI Calibrate |
| 110609 | APN45-6/2M Calibrate | RIGID SURFACE PROBE, 1-3MHZ, CENTER FREQ Calibrate |
| 110610 | APN456 Calibrate | PROBE Calibrate |
| 110611 | APN4562M Calibrate | RIGID SURFACE PROBE, 1-3MHZ, CENTER FREQ Calibrate |
| 110612 | APN5 Calibrate | STRAIGHT RIGID SURFACE PROBE 5.0" LONG .125"Ø WITH MICRODOT CONNECTOR 50-500KHZ.. INCLUDES TEST RE Calibrate |
| 110613 | APN5 Calibrate | STRAIGHT RIGID SURFACE PROBE, ABS SHIELDED, .125" Calibrate |
| 110614 | APN513MHZ Calibrate | STRAIGHT RIGID SURFACE PROBE, SHIELDED, .125"Ø Calibrate |
| 110615 | APN5500K Calibrate | RIGID STRAIGHT SURFACE PROBE, 200 KHZ-1 MHZ WITH A CENTER FREQUENCY OF 500 KHZ, 31 UM COIL. .125"Ø, Calibrate |
| 110616 | APN550500KHZ Calibrate | PROBE Calibrate |
| 110617 | APN7FX Calibrate | SURFACE PROBE Calibrate |
| 110618 | APN8FX7L16MHZ Calibrate | STRAIGHT FLEXIBLE SURFACE PROBE, .1/8"DIA TUBING 50-500KHZ, 8.0" LONG. 7PIN LEMO. INCLUDES TEST Calibrate |
| 110619 | APN90352M Calibrate | PENCIL PROBE Calibrate |
| 110620 | APN90352M Calibrate | RIGID SURFACE PROBE 1-3MHZ, .030 DROP, .125 Ø TIP, 5.0" LONG, MICRODOT CONNECTOR. INCLUDES TEST REP Calibrate |
| 110621 | APN9036B Calibrate | HFEC PROBE Calibrate |
| 110622 | APN9036FX Calibrate | FLEXIBLE SURFACE PROBE 50-500KHZ, .030 DROP, .125 Ø TIP, 6.0" LONG, MICRODOT CONNECTOR. INCLUDES TE Calibrate |
| 110623 | APN90552MHZ Calibrate | PENCIL PROBE NDT Calibrate |
| 110624 | APN91072M Calibrate | RIGID SURFACE PROBE ABSOLUTE SHIELDED, ..1-3MHZ, 90° DEGREES, .125"Ø TIP 1.00" DROP 7.0" LONG WITH Calibrate |
| 110625 | APN91452MHZ Calibrate | RIGID SURFACE PROBE, 90° DEGREES, ABSOLUTE SHIELDED, 1-3 MHZ, .100" DROP, 4.5" LONG SUPPLIED WITH A Calibrate |
| 110626 | APN9145L500K Calibrate | RIGID SURFACE PROBE ABSOLUTE SHIELDED, .125"Ø TIP, 500 KHZ, 90° DEGREES, 0.100" DROP 4.5" LONG SUPPL Calibrate |
| 110627 | APN9254 Calibrate | RIGID SURFACE PROBE 90° DEGREES .250" DROP 4.0" LONG WITH A MICRODOT CONNECTOR 50-500KHZ. INCLUDES Calibrate |
| 110628 | APN92545B Calibrate | RIGID SURFACE PROBE 50-500KHZ, 90 DEGREE, .125 O Calibrate |
| 110629 | APN92545BL500K Calibrate | PENCIL PROBE 90º FE/NFE Calibrate |
| 110630 | APN92545L500K Calibrate | PENCIL PROBE Calibrate |
| 110631 | APN92545L500K Calibrate | RIGID SURFACE PROBE 500KHZ, 90 DEGREE, .125" OD, .250" DROP, 4.5" LONG, LOCATOR 500KHZ ( 47 UH) MIC Calibrate |
| 110632 | APN935B2MHZ Calibrate | RIGID SURFACE PROBE, .125"(3.18MM)Ø SHAFT, 90° .300" DROP, 1-3MHZ ,BENT 30°, 5.0" LONG SUPPLIED WITH Calibrate |
| 110633 | APN936 Calibrate | RIGID SURFACE PROBE, 50-500KHZ ABS SHIELDED, .125" Ø(3.17 MM), 90° DEGREES, .300"(7.62 MM) DROP, Calibrate |
| 110634 | APN95-5 Calibrate | HFEC SURFACE PROBE 50-500KHZ Calibrate |
| 110635 | APN95-5FX Calibrate | PROBE Calibrate |
| 110636 | APN9510FX7L Calibrate | FLEXIBLE SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø TIP, 10.0" LONG 7 PIN LEMO CONNECTOR 50-500 Calibrate |
| 110637 | APN95452MHZ Calibrate | PROBE Calibrate |
| 110638 | APN955 Calibrate | HFEC SURFACE PROBE 50-500KHZ Calibrate |
| 110639 | APN955 Calibrate | RIGID SURFACE PROBE, 90?? DEGREES, .500 DROP, .1 Calibrate |
| 110640 | APN9552M Calibrate | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø SHAFT, 1-3 M HZ. WITH A 2 MHZ CENTER FREQUENCY, Calibrate |
| 110641 | APN955500K Calibrate | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø, 5.0" LONG WITH MICRODOT CONNECTOR 200 KHZ-1 MH Calibrate |
| 110642 | APN95550500KHZ Calibrate | PROBE Calibrate |
| 110643 | APN955FX Calibrate | PROBE Calibrate |
| 110644 | APN956 Calibrate | PROBE Calibrate |
| 110645 | APNU-5/2M Calibrate | RIGID STRAIGHT SURFACE PROBE, .125"Ø SHAFT, UNSHIELDED, 1-3 MHZ WITH A 2 MHZ CENTER FREQUENCY, 5.0" Calibrate |
| 110646 | APNU-95-5/2M Calibrate | RIGID SURFACE PROBE 90°, .500" DROP UNSHIELDED SUPPLIED WITH A MICRODOT CONNECTOR, 1-3 MHZ. 5.0" LON Calibrate |
| 110647 | APNU-95-5/500K Calibrate | RIGID SURFACE PROBE, UNSHIELDED, 200 KHZ-1 MHZ WITH A 500 KHZ CENTER FREQUENCY, 90°, .125"Ø SHAFT, . Calibrate |
| 110648 | APNU52M Calibrate | RIGID STRAIGHT SURFACE PROBE, .125"Ø SHAFT, UNSHIELDED, 1-3 MHZ WITH A 2 MHZ CENTER FREQUENCY, 5.0" Calibrate |
| 110649 | APNU9552M Calibrate | RIGID SURFACE PROBE 90°, .500" DROP UNSHIELDED SUPPLIED WITH A MICRODOT CONNECTOR, 1-3 MHZ. 5.0" LON Calibrate |
| 110650 | APNU955500K Calibrate | RIGID SURFACE PROBE, UNSHIELDED, 200 KHZ-1 MHZ WITH A 500 KHZ CENTER FREQUENCY, 90°, .125"Ø SHAFT, . Calibrate |
| 110651 | APOLLO 2.0 Calibrate | LIGHT METER Calibrate |
| 110652 | APOLLO 2.O Calibrate | LIGHT METER Calibrate |
| 110653 | APR13-5-29P Calibrate | PROBE Calibrate |
| 110654 | APR13529P Calibrate | PROBE Calibrate |
| 110655 | APS-200 Calibrate | WING COVERS, 15 METER WINGSPAN, ALL YEAR USE SET Calibrate |
| 110656 | APS200 Calibrate | WING COVERS, 15 METER WINGSPAN, ALL YEAR USE SET Calibrate |
| 110657 | APS2300 APU STAND Calibrate | APS2300 APU TRANSPORTATION STAND Calibrate |
| 110658 | APS2300APUSTAND Calibrate | APS2300 APU TRANSPORTATION STAND Calibrate |
| 110659 | APS3200 Calibrate | APU AUXILIARY POWER UNIT A319/A320/A321 Calibrate |
| 110660 | APS351C Calibrate | "3/4–2"" ADJUSTABLE PIN SPANNER WRENCH" Calibrate |
| 110661 | APS357B Calibrate | SPANNER WR Calibrate |
| 110662 | APS357C Calibrate | SPANNER, WRENCH Calibrate |
| 110663 | APS363C Calibrate | "2–4-3/4"" ADJUSTABLE PIN SPANNER WRENCH" Calibrate |
| 110664 | APT-001-300 Calibrate | NEWBOW TYRE PRESSURE GAUGE Calibrate |
| 110665 | APT-398-019 Calibrate | SCREW REMOVAL TOOLS Calibrate |
| 110666 | APT-AXLE45T Calibrate | AXLE JACK 30 TON Calibrate |
| 110667 | APT-CDP-100 Calibrate | C DUCT HAND PUMP Calibrate |
| 110668 | APT-SPLICE-40 Calibrate | AVIONICS SPLICE KIT Calibrate |
| 110669 | APT001300 Calibrate | NEWBOW TYRE PRESSURE GAUGE Calibrate |
| 110670 | APT001300 Calibrate | TIRE PRESSURE GAUGE Calibrate |
| 110671 | APT001300 Calibrate | TYRE PRESSURE GAUGE Calibrate |
| 110672 | APT398-019 Calibrate | REMOVAL TOOL Calibrate |
| 110673 | APT398019 Calibrate | SCREW REMOVAL TOOLS Calibrate |
| 110674 | APT398019 Calibrate | SCREW REMOVAL TOOLS & BIT Calibrate |
| 110675 | APT398019 Calibrate | SCREW REMOVAL TOOLS & BIT KIT Calibrate |
| 110676 | APT398019 Calibrate | REMOVAL TOOL Calibrate |
| 110677 | APT398019 Calibrate | SCREW EXTRACTOR Calibrate |
| 110678 | APT398019 Calibrate | SCREW REMOVAL TOOL KIT Calibrate |
| 110679 | APT398019 Calibrate | SCREW REMOVAL TOOLS & BIT KIT Calibrate |
| 110680 | APTAXLE45T Calibrate | AXLE JACK 30 TON Calibrate |
| 110681 | APTCDP100 Calibrate | C DUCT HAND PUMP Calibrate |
| 110682 | APTCDP100 Calibrate | COWLING PUMP Calibrate |
| 110683 | APTE-548-2250-70D Calibrate | TORQUE PRESS TRANSMITTER Calibrate |
| 110684 | APTE548225070D Calibrate | TORQUE PRESS TRANSMITTER Calibrate |
| 110685 | APTK1738-5/939-2 Calibrate | OXYGEN SHUTOFF VALVE AND TEST HARNESS Calibrate |
| 110686 | APTK173859392 Calibrate | OXYGEN SHUTOFF VALVE AND TEST HARNESS Calibrate |
| 110687 | APTSPLICE40 Calibrate | AVIONICS SPLICE KIT Calibrate |
| 110688 | APTTC02 Calibrate | TOPCHEST COMBINATION TOOL KIT-14 DRAWER TOOL Calibrate |
| 110689 | APTWD1 Calibrate | APEX BIT 1/4 HEX INS Calibrate |
| 110690 | APTWD2 Calibrate | APEX BIT 1/4 HEX INS Calibrate |
| 110691 | APTWD3 Calibrate | APEX BIT 1/4 HEX INS Calibrate |
| 110692 | APTWD6 Calibrate | APEX BIT 1/4 HEX INS Calibrate |
| 110693 | APU GTCP131-9A Calibrate | HONEYWELL APU STAND Calibrate |
| 110694 | APU GTCP131-9B Calibrate | HONEYWELL APU STAND Calibrate |
| 110695 | APUGTCP1319A Calibrate | HONEYWELL APU STAND Calibrate |
| 110696 | APUGTCP1319B Calibrate | HONEYWELL APU STAND Calibrate |
| 110697 | APV5410-00-0 Calibrate | CRADLE - AFT PYLON FAIRING Calibrate |
| 110698 | APV5410000 Calibrate | CRADLE - AFT PYLON FAIRING Calibrate |
| 110699 | APV7110-01-0 Calibrate | SLING - INLET COWL Calibrate |
| 110700 | APV7110-01-0G Calibrate | INLET COWL SLING A340-500/ Calibrate |
| 110701 | APV7110010 Calibrate | SLING - INLET COWL Calibrate |
| 110702 | APV7110010G Calibrate | INLET COWL SLING A340-500/ Calibrate |
| 110703 | APV7110010G Calibrate | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION ENGINE INLET Calibrate |
| 110704 | APV7110010G Calibrate | TOOL: SLING - INLET Calibrate |
| 110705 | APV7112-00-0 Calibrate | SLING SET-FAN COWL Calibrate |
| 110706 | APV7112000 Calibrate | SLING SET-FAN COWL Calibrate |
| 110707 | APV7112000 Calibrate | TOOL: SLING-FAN COWL Calibrate |
| 110708 | APV7811-02-0 Calibrate | SLING,LIFTING-TRANSLATING COWL,THRUST REVERSER Calibrate |
| 110709 | APV7811020 Calibrate | SLING,LIFTING-TRANSLATING COWL,THRUST REVERSER Calibrate |
| 110710 | APV7812-01-0 Calibrate | SLING-THRUST REVERSER COWL Calibrate |
| 110711 | APV7812010 Calibrate | SLING-THRUST REVERSER COWL Calibrate |
| 110712 | APV7820-01-0 Calibrate | HAND PUMP - THRUST REVERSER Calibrate |
| 110713 | APV7820010 Calibrate | HAND PUMP - THRUST REVERSER Calibrate |
| 110714 | APV7821-00-0G Calibrate | CINCHING DEVICE Calibrate |
| 110715 | APV7821000G Calibrate | CINCHING DEVICE Calibrate |
| 110716 | APV7832-00-0 Calibrate | DEVICE,PROTECTION-NOZZLE PLUG Calibrate |
| 110717 | APV7832000 Calibrate | DEVICE,PROTECTION-NOZZLE PLUG Calibrate |
| 110718 | APV7833-00-0 Calibrate | LOCATOR - AXIAL R3 Calibrate |
| 110719 | APV7833000 Calibrate | LOCATOR - AXIAL R3 Calibrate |
| 110720 | APV7850-01-0 Calibrate | TROLLEY - THRUST REVERSER COWLS Calibrate |
| 110721 | APV7850010 Calibrate | TROLLEY - THRUST REVERSER COWLS Calibrate |
| 110722 | APV7860-01-0 Calibrate | BULLET - THRUST REVERSER COWL Calibrate |
| 110723 | APV7860010 Calibrate | BULLET - THRUST REVERSER COWL Calibrate |
| 110724 | APV7860010 Calibrate | BULLET T/R COWL Calibrate |
| 110725 | APV7861-01-0G Calibrate | COVER Calibrate |
| 110726 | APV7861-04-0 Calibrate | COVER - THRUST REVERSER Calibrate |
| 110727 | APV7861-04-0G Calibrate | COVER - THRUST REVERSER Calibrate |
| 110728 | APV7861010G Calibrate | COVER Calibrate |
| 110729 | APV7861010G Calibrate | COVER - THRUST REVERSER Calibrate |
| 110730 | APV7861010G Calibrate | COVER-THRUST REVERSE Calibrate |
| 110731 | APV7861040 Calibrate | COVER - THRUST REVERSER Calibrate |
| 110732 | APV7861040 Calibrate | COVER, THRUST REVERSER Calibrate |
| 110733 | APV7861040G Calibrate | COVER - THRUST REVERSER Calibrate |
| 110734 | APV7861040G Calibrate | COVER-THRUST REVERSE Calibrate |
| 110735 | APV7870-01-0 Calibrate | RIGGING TOOL - TRANSLATING SLEEVE, T/R Calibrate |
| 110736 | APV7870010 Calibrate | RIGGING TOOL - TRANSLATING SLEEVE, T/R Calibrate |
| 110737 | APV7877-00-0 Calibrate | SOCKET,EXHAUST AFT PLUGG Calibrate |
| 110738 | APV7877000 Calibrate | SOCKET,EXHAUST AFT PLUGG Calibrate |
| 110739 | APY0R61058 Calibrate | TORQUE ADAPTER 5/8" Calibrate |
| 110740 | APYOR-610-58 Calibrate | TORQUE ADAPTER 5/8" Calibrate |
| 110741 | AQ1983 Calibrate | INFLATABLE TENT/SHELTER Calibrate |
| 110742 | AQBK01 Calibrate | INSPECTION CAMERA SYSTEM Calibrate |
| 110743 | AQD500TF Calibrate | QUICK DISCONNECT COUPLING Calibrate |
| 110744 | AR 4728-1 Calibrate | COMPRESSION TEST SIMULATOR Calibrate |
| 110745 | AR.5,5X100 Calibrate | FLAT SCREWDRIVER 100 M/M Calibrate |
| 110746 | AR.5.5X100 Calibrate | SCREWDRIVER FOR SLOTTED SCREWS Calibrate |
| 110747 | AR000700 Calibrate | ROTOR UNIT - MINI Calibrate |
| 110748 | AR100 Calibrate | R3 RETRACTA AIR REEL 15M X 1/2" ID Calibrate |
| 110749 | AR2-5X50 Calibrate | AR SCREWDRIVER 2.5*50 Calibrate |
| 110750 | AR2101 Calibrate | AIR HOSE REAL Calibrate |
| 110751 | AR25X50 Calibrate | AR SCREWDRIVER 2.5*50 Calibrate |
| 110752 | AR25X50 Calibrate | FLAT SCREWDRIVER Calibrate |
| 110753 | AR25X50 Calibrate | FLAT TOURENEVIS Calibrate |
| 110754 | AR25X50 Calibrate | SCREWDRIVER Calibrate |
| 110755 | AR3-5X75 Calibrate | AR SCREWDRIVER 3.5*75 Calibrate |
| 110756 | AR320R Calibrate | AIR HOSE FOR AIRCRAFT MAINTENANCE Calibrate |
| 110757 | AR35X75 Calibrate | AR SCREWDRIVER 3.5*75 Calibrate |
| 110758 | AR35X75 Calibrate | FLAT SCREWDRIVER Calibrate |
| 110759 | AR35X75 Calibrate | FLAT TOURENEVIS Calibrate |
| 110760 | AR35X75 Calibrate | SCREWDRIVER Calibrate |
| 110761 | AR4420 Calibrate | ENDOSCOPE Calibrate |
| 110762 | AR4704-6 Calibrate | DOOR STRIKE ASSY, ELEC Calibrate |
| 110763 | AR47046 Calibrate | DOOR STRIKE ASSY, ELEC Calibrate |
| 110764 | AR47046 Calibrate | STRIKE Calibrate |
| 110765 | AR4728-1 Calibrate | DECOMP SIMULATOR E.O 252138 Calibrate |
| 110766 | AR47281 Calibrate | COMPRESSION TEST SIMULATOR Calibrate |
| 110767 | AR47281 Calibrate | DECOMPRESSION SIMULATOR Calibrate |
| 110768 | AR47281 Calibrate | DECOMPRESSION TEST SIMULATOR Calibrate |
| 110769 | AR47281 Calibrate | TEST TOOL - PRESSURE SENSOR, COCKPIT DOOR Calibrate |
| 110770 | AR47281 Calibrate | TEST TOOL PRESSURE SONSOR - COC Calibrate |
| 110771 | AR47281 Calibrate | DECOMP SIMULATOR E.O 252138 Calibrate |
| 110772 | AR47281 Calibrate | DECOMPRESSI ON SIMULATOR Calibrate |
| 110773 | AR47281 Calibrate | DECOMPRESSION SIM Calibrate |
| 110774 | AR47281 Calibrate | DECOMPRESSION SIMULA Calibrate |
| 110775 | AR47281 Calibrate | DECOMPRESSION SIMULATOR Calibrate |
| 110776 | AR47281 Calibrate | DECOMPRESSION TEST Calibrate |
| 110777 | AR47281 Calibrate | DECOMPRESSION TEST SIMULATOR Calibrate |
| 110778 | AR47281 Calibrate | DECOMPRESSION TEST SIMULATOR TOOL Calibrate |
| 110779 | AR47281 Calibrate | DECOMPRESSION TEST SIMULATOR. PN AR4728-1 (MANUFACTURER ADAMS RITE AEROSPACE Calibrate |
| 110780 | AR47281 Calibrate | DECOMPRESSION TEST-SIMULATOR Calibrate |
| 110781 | AR47281 Calibrate | DECOMPRESSIONTEST SIMULATOR Calibrate |
| 110782 | AR47281 Calibrate | SIMULATOR DECOMPRESSION TEST Calibrate |
| 110783 | AR47281 Calibrate | SIMULATOR, DECOMPRESSION, CKPT DOOR CONT, Calibrate |
| 110784 | AR47281 Calibrate | SUCTION TOOL Calibrate |
| 110785 | AR47281 Calibrate | TEST TOOL Calibrate |
| 110786 | AR47281 Calibrate | TEST TOOL PRESSURE SENSOR Calibrate |
| 110787 | AR55X100 Calibrate | FLAT SCREWDRIVER 100 M/M Calibrate |
| 110788 | AR55X100 Calibrate | SCREWDRIVER Calibrate |
| 110789 | AR55X100 Calibrate | SCREWDRIVER FOR SLOTTED SCREWS Calibrate |
| 110790 | AR55X100 Calibrate | SCREWDRIVER FOR SLOTTED SCREWS Calibrate |
| 110791 | AR6,5X150 Calibrate | FLAT SCREWDRIVER 150 M/M Calibrate |
| 110792 | AR63B Calibrate | SENSOR (TOOL) Calibrate |
| 110793 | AR65X150 Calibrate | FLAT SCREWDRIVER 150 M/M Calibrate |
| 110794 | ARA-552 Calibrate | ANALOGUE RADIO ALTITUDE TEST SET Calibrate |
| 110795 | ARA552 Calibrate | ANALOGUE RADIO ALTITUDE TEST SET Calibrate |
| 110796 | ARA552 Calibrate | ATLANTIS AVIONICS - RADIO ALTIMETER TEST SET Calibrate |
| 110797 | ARA552 Calibrate | DRA707 DIGITAL RADIO ALTIMETER TEST SET Calibrate |
| 110798 | ARA552 Calibrate | RAD ALT TEST SET Calibrate |
| 110799 | ARA552 Calibrate | RADIO ALTIMETER KIT Calibrate |
| 110800 | ARA552 Calibrate | RADIO ALTIMETER TEST SET Calibrate |
