| Part Number | Tool Description |
|---|
| 41201 | 2C8047P05 Calibrate | YOKE Calibrate |
| 41202 | 2C8055 Calibrate | GO/NO GO GAGE SPLINE WEAR, HORIZ DRIVE SHAFT - 1GB Calibrate |
| 41203 | 2C8055G01 Calibrate | IGB SPLINE GAGE Calibrate |
| 41204 | 2C8063G01 Calibrate | INSPECTION GAUGE Calibrate |
| 41205 | 2C8064G02 Calibrate | GAGE, INSPECT - MUFF Calibrate |
| 41206 | 2C8073 Calibrate | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE Calibrate |
| 41207 | 2C8073G01 Calibrate | FIXTURE, REMOVAL AND Calibrate |
| 41208 | 2C8073G04 Calibrate | FAN BLADE REMOVAL TOOL Calibrate |
| 41209 | 2C8073G05 Calibrate | FAN BLADE PRELOAD Calibrate |
| 41210 | 2C8073G05-1 Calibrate | PLASTIC END CAP Calibrate |
| 41211 | 2C8073G051 Calibrate | PLASTIC END CAP Calibrate |
| 41212 | 2C8073P26 Calibrate | CAP Calibrate |
| 41213 | 2C81000G01 Calibrate | DOLLY AND ENGINE SLING Calibrate |
| 41214 | 2C81000G02 Calibrate | CF34-8C ENGINE SLING Calibrate |
| 41215 | 2C81000G02-IAS Calibrate | GE CF34-8C ENGINE HOIST/SLING Calibrate |
| 41216 | 2C81000G02IAS Calibrate | GE CF34-8C ENGINE HOIST/SLING Calibrate |
| 41217 | 2C81006G01 Calibrate | PULLER, FORWARD AND AFT CAP Calibrate |
| 41218 | 2C81007G03 Calibrate | ADAPTER HOIST Calibrate |
| 41219 | 2C81010G01 Calibrate | GUIDE, DRIVE SHAFT FAN CF34 Calibrate |
| 41220 | 2C81017G01 Calibrate | BUILD-UP STAND ADAPTER (ADAPTER) Calibrate |
| 41221 | 2C81028G01 Calibrate | GE CF34-8 ENGINE WATER WASH MANIFOLD Calibrate |
| 41222 | 2C81028G02 Calibrate | CART, ENGINE WASH MANIFOLD Calibrate |
| 41223 | 2C81029G01 Calibrate | FIXTURE, FAN ROTOR LOAD Calibrate |
| 41224 | 2C81030G01 Calibrate | CHIP DETECTOR KIT Calibrate |
| 41225 | 2C81033G01 Calibrate | DOLLY / STAND - ENGINE REST, STORAGE AND BUILD Calibrate |
| 41226 | 2C81033G01 Calibrate | DOLLY, ENGINE REST STORAGE AND BUILD Calibrate |
| 41227 | 2C81033GO1 Calibrate | DOLLY, ENGINE REST STORAGE AND BUILD Calibrate |
| 41228 | 2C81033P05 Calibrate | PIN Calibrate |
| 41229 | 2C81034G01 Calibrate | ENGINE TRANSPORT DOLLY Calibrate |
| 41230 | 2C81035G01 Calibrate | STARTER OIL SERVICE GUN Calibrate |
| 41231 | 2C81035G02 Calibrate | STARTER OIL Calibrate |
| 41232 | 2C81041G02 Calibrate | FIXTURE ˆ’ HOLDING, SHIPPING, HPT MODULE Calibrate |
| 41233 | 2C81043G01 Calibrate | ADAPTER, HOIST-LPT MODULE (HOIST ADAPTER) Calibrate |
| 41234 | 2C81046G01 Calibrate | ADAPTER, LPT-TO-FAN DRIVE SHAFT Calibrate |
| 41235 | 2C81048P01 Calibrate | CAP, OIL TANK PROTECTOR Calibrate |
| 41236 | 2C81050G01 Calibrate | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE Calibrate |
| 41237 | 2C81051-G01 Calibrate | CF34-8E ENGINE STAND Calibrate |
| 41238 | 2C81051G01 Calibrate | CF34-8E ENGINE STAND Calibrate |
| 41239 | 2C81051G01 Calibrate | FRAME, OUTER - SHIPPING Calibrate |
| 41240 | 2C81051P50 Calibrate | FORGED SHACKLE Calibrate |
| 41241 | 2C81052-G02 Calibrate | FRAME, INNER - SHIPPING Calibrate |
| 41242 | 2C81052G01 Calibrate | FRAME, INNER SHIPPING Calibrate |
| 41243 | 2C81052G02 Calibrate | FRAME, INNER - SHIPPING Calibrate |
| 41244 | 2C81052P12 Calibrate | DUMMY MOUNT Calibrate |
| 41245 | 2C81056G01 Calibrate | PUMP UNIT − WASH CART Calibrate |
| 41246 | 2C81056G02 Calibrate | CART, ENGINE WASH PUMP Calibrate |
| 41247 | 2C81057P01 Calibrate | COVER - ENGINE EXHAUST Calibrate |
| 41248 | 2C81073P02 Calibrate | PROTECTOR, FAN SPINNER Calibrate |
| 41249 | 2C81079G01 Calibrate | CABLE POWER SUPPLY TO FADEC - PMAT 2000 Calibrate |
| 41250 | 2C81079G02 Calibrate | CABLE POWER SUPPLY TO FADEC - PMAT 2000 (220V) Calibrate |
| 41251 | 2C81109G01 Calibrate | FAN BLADE PIN PULLER Calibrate |
| 41252 | 2C81118G01 Calibrate | ENERPAC HYDRAULIC HAND PUMP Calibrate |
| 41253 | 2C81186G01 Calibrate | CASING, DUMMY, HPC STATOR (DUMMY CASE STATOR) Calibrate |
| 41254 | 2C81210G01 Calibrate | REMOVAL KIT Calibrate |
| 41255 | 2C81243G01 Calibrate | FIXTURE, TURNBUCKLE SET Calibrate |
| 41256 | 2C81303P02 Calibrate | GAGE, AREA - HPT, STAGE 1 NOZZLE Calibrate |
| 41257 | 2C81407G04 Calibrate | ADAPTER, HPT LOCKNUT TORQUE Calibrate |
| 41258 | 2C81408G03 Calibrate | PUSHER/PULLER - HPT ROTOR Calibrate |
| 41259 | 2C81413G02 Calibrate | AFT STATIC SEAL SPRING MOUNT Calibrate |
| 41260 | 2C81416G01 Calibrate | ADAPTER, HOIST - HPT ROTOR LIFT AND TURN (ROTOR HOIST ADAPTER) Calibrate |
| 41261 | 2C81422G01 Calibrate | PROTECTIVE COVER HPT ROTOR ROTATING Calibrate |
| 41262 | 2C81431G01 Calibrate | FIXTURE HOLDING HPT ROTOR Calibrate |
| 41263 | 2C81434G02 Calibrate | ADAPTER HPT LOCKNUT TORQUE Calibrate |
| 41264 | 2C81445G01 Calibrate | ADAPTER, TORQUE - HPT ROTOR JOINT Calibrate |
| 41265 | 2C81463G01 Calibrate | ADAPTER, TORQUE - HPT LOCKNUT (TORQUE ADAPTER) Calibrate |
| 41266 | 2C81501G03 Calibrate | STAND, LPT BUILD-UP Calibrate |
| 41267 | 2C81502P02 Calibrate | ADAPTER Calibrate |
| 41268 | 2C81519G02 Calibrate | ADAPTER, HORIZONTAL SLING, LPT Calibrate |
| 41269 | 2C81533G02 Calibrate | ADAPTER, LPT DISK LOCKNUT TORQUE Calibrate |
| 41270 | 2C81537G01 Calibrate | PUSHER/PULLER, LPT MODULE Calibrate |
| 41271 | 2C81554P02 Calibrate | RING, SPACER CASE Calibrate |
| 41272 | 2C81601G01 Calibrate | ADAPTER AGB HOIST Calibrate |
| 41273 | 2C81606P01 Calibrate | BLANKING PLATE, EDP Calibrate |
| 41274 | 2C81703 Calibrate | ENGINE PRESERVATION Calibrate |
| 41275 | 2C81703P01 Calibrate | ENGINE GROUND OIL SEAL EQUIPMENT Calibrate |
| 41276 | 2C81703P02 Calibrate | GE CF34-8E PRESERVATION KIT Calibrate |
| 41277 | 2C81703P03 Calibrate | GE CF34-10E PRESERVATION KIT Calibrate |
| 41278 | 2C81703P04 Calibrate | CF34-8 PRESERVATION KIT Calibrate |
| 41279 | 2C81703P05 Calibrate | CF34 PRESERVATION KIT Calibrate |
| 41280 | 2C81703P05-IAS Calibrate | UNIT, ENGINE PRESERVATION, CF34-10E Calibrate |
| 41281 | 2C81703P05IAS Calibrate | UNIT, ENGINE PRESERVATION, CF34-10E Calibrate |
| 41282 | 2C81703P07 Calibrate | CF34-3 PRESERVATION KIT Calibrate |
| 41283 | 2C81703P07-IAS Calibrate | GE CF34-3 PRESERVATION KIT Calibrate |
| 41284 | 2C81703P07IAS Calibrate | GE CF34-3 PRESERVATION KIT Calibrate |
| 41285 | 2C81703P08 Calibrate | CTS ENGINE STORAGE TOOL Calibrate |
| 41286 | 2C81945G01 Calibrate | CF34-10 INSTALLER MATING RING E195 (SEE TECH BOX) Calibrate |
| 41287 | 2C81946G01 Calibrate | CF34-10 INSTALLER MATING RING E195 (SEE TECH BOX) Calibrate |
| 41288 | 2C81949G01 Calibrate | CARBON-SEAL AGB PULLER SET Calibrate |
| 41289 | 2C81950G01 Calibrate | AGB-MATING-RING PULLER SET Calibrate |
| 41290 | 2C81956G01 Calibrate | CF34-10 INSTALLER MATING RING E195 (SEE TECH BOX) Calibrate |
| 41291 | 2C90085G03 Calibrate | TEST SET,INSULATION Calibrate |
| 41292 | 2C90399G01 Calibrate | ADAPTER Calibrate |
| 41293 | 2C90500G02 Calibrate | ADAPTER, POWER UNIT HOIST Calibrate |
| 41294 | 2C90501G01 Calibrate | ENGINE AND PROPELLER GEARBOX SUPPORT CART. Calibrate |
| 41295 | 2C90502G01 Calibrate | ADAPTER FOR THE PROPELLER GEARBOX SLING. Calibrate |
| 41296 | 2C90503P01 Calibrate | KEY FOR THE LOCK NUT OF THE ADJUSTABLE TURNBUCKLE OF THE PROPELLER Calibrate |
| 41297 | 2C90509G01 Calibrate | ADAPTER, ENGINE HOIST Calibrate |
| 41298 | 2C91002G01 Calibrate | ADAPTER, ON WING MAINTENANCE Calibrate |
| 41299 | 2C91008P01 Calibrate | CAGE, COMPRESSOR STATOR VARIABLE VANE ANGLE Calibrate |
| 41300 | 2C91009G01 Calibrate | HOLDER, FRONT SHAFT Calibrate |
| 41301 | 2C91011G01 Calibrate | STAND, HPT ROTOR BUILD UP Calibrate |
| 41302 | 2C91012G02 Calibrate | RETAINER LPT ROTOR Calibrate |
| 41303 | 2C91015G01 Calibrate | CHECK VALVE Calibrate |
| 41304 | 2C91015G02 Calibrate | PULLER, HPT ROTOR HYDRAULIC Calibrate |
| 41305 | 2C91016G01 Calibrate | PULLER - LOW PRESSURE TURBINE ROTOR Calibrate |
| 41306 | 2C91017G01 Calibrate | PULLER, SHAFT-FAN ROTOR Calibrate |
| 41307 | 2C91021G01 Calibrate | PULLER Nº2 BEARING Calibrate |
| 41308 | 2C91023G01 Calibrate | TOOL Calibrate |
| 41309 | 2C91023G02 Calibrate | PUSHER , Nº1 BEARING INNER RACE Calibrate |
| 41310 | 2C91024G01 Calibrate | PUSHER, NO. 2 BEARING OUTER RACE Calibrate |
| 41311 | 2C91031G01 Calibrate | FIXTURE ACCESSORY DRIVE GEARBOX (AGB) POSITIONNING Calibrate |
| 41312 | 2C91038G01 Calibrate | HOLDER, COMPRESSOR STATOR CASING HALF Calibrate |
| 41313 | 2C91049P01 Calibrate | PILOT, FAN DRIVE SHAFT Calibrate |
| 41314 | 2C91051G01 Calibrate | STAND, CORE ENGINE VERTICAL BUILD UP Calibrate |
| 41315 | 2C91056G01 Calibrate | CONTAINER, ENGINE, METAL Calibrate |
| 41316 | 2C91061G01 Calibrate | LPT FAN SHAFT SNAP RING Calibrate |
| 41317 | 2C91065G01 Calibrate | ADAPTER, COMBUSTION HOIST/PILOT Calibrate |
| 41318 | 2C91066G01 Calibrate | DOLLY, VERTICAL BUILD UP ENGINE Calibrate |
| 41319 | 2C91066G02 Calibrate | DOLLY, VERTICAL BUILD UP ENGINE Calibrate |
| 41320 | 2C91069G01 Calibrate | GAUGE FAN BLADE LEADING EDGE Calibrate |
| 41321 | 2C91071G01 Calibrate | ADAPTER Calibrate |
| 41322 | 2C91072G01 Calibrate | TORQUE ADAPTER Calibrate |
| 41323 | 2C91076G01 Calibrate | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR Calibrate |
| 41324 | 2C91089G01 Calibrate | GAGE, HPT SHROUD Calibrate |
| 41325 | 2C91131G02 Calibrate | TESTER VG POSITIONER Calibrate |
| 41326 | 2C91230G01 Calibrate | FIXTURE-SUPPORT SHAFTS Calibrate |
| 41327 | 2C91250G01 Calibrate | FIXTURE, FAN ROTOR RUNOUT Calibrate |
| 41328 | 2C91265G01 Calibrate | SET - GAGE CLEARANCE CHECK Calibrate |
| 41329 | 2C91299G01 Calibrate | PULLER - Calibrate |
| 41330 | 2C91306P01 Calibrate | EXTENDER - HPT - STG 1 BLADE Calibrate |
| 41331 | 2C91307P01 Calibrate | EXTENDER - HPT - STG 2 BLADE Calibrate |
| 41332 | 2C91312G02 Calibrate | BUILD -UP ENGINE/CORE STAND Calibrate |
| 41333 | 2C91330G01 Calibrate | PULLER - #1 BEARING AND SEAL RUNNER Calibrate |
| 41334 | 2C91349G01 Calibrate | ADAPTER, HPT LOCKNUT TORQUE Calibrate |
| 41335 | 2C91352G01 Calibrate | FIXTURE - ASSY/DISASSEMBLY HPT Calibrate |
| 41336 | 2C91354G01 Calibrate | FIXTURE, HOLDING Calibrate |
| 41337 | 2C91354G02 Calibrate | TEST FIXTURE Calibrate |
| 41338 | 2C91354G02 Calibrate | "FIXTURE OIL FILTER BYPASS VALVE SENSOR HOLDING Calibrate |
| 41339 | 2C91381G01 Calibrate | FIXTURE - RETAINING TRANSFER TUBE Calibrate |
| 41340 | 2C91389P01 Calibrate | GAGES, VANE ANGLES SIGHTING Calibrate |
| 41341 | 2C91389P06 Calibrate | GAGES, VANE ANGLES SIGHTING Calibrate |
| 41342 | 2C9516 Calibrate | CHECK VALVE Calibrate |
| 41343 | 2CBA Calibrate | BOTTOMIMG TAP Calibrate |
| 41344 | 2CBB Calibrate | BOTTOMIMG TAP Calibrate |
| 41345 | 2CF65B05528-1 Calibrate | BALANCE JIG STAND Calibrate |
| 41346 | 2CF65B055281 Calibrate | BALANCE JIG STAND Calibrate |
| 41347 | 2CF65B055281 Calibrate | BALANCE JIG STAND Calibrate |
| 41348 | 2CF65B055281 Calibrate | BALANCE STAND Calibrate |
| 41349 | 2CF65B055281 Calibrate | BALANCE STAND - OUTBOARD AILERON, UPPER RUDDER AN Calibrate |
| 41350 | 2CF65B055281 Calibrate | BALANCE STAND - OUTBOARD AILERON, UPPER RUDDER AND Calibrate |
| 41351 | 2CF65B055281 Calibrate | BALANCE STAND - OUTBOARD AILERON, UPPER RUDDER AND OUTBOARD ELEVATOR Calibrate |
| 41352 | 2CF65B055281 Calibrate | BALANCE STAND - OUTBOARD AILERON,UPPER RUDDER AND OUTBOARD ELEVATOR Calibrate |
| 41353 | 2CF65B055281 Calibrate | BALANCE STAND, OTBD ALRN, UPR RUD & OTBD ELEV Calibrate |
| 41354 | 2CF65B055281 Calibrate | FLIGHT CONTROL BALANCING Calibrate |
| 41355 | 2CPA Calibrate | HELI-COIL PLUG TAP Calibrate |
| 41356 | 2DFE2 Calibrate | MULTI PURPOSE TOOL Calibrate |
| 41357 | 2E-24H Calibrate | COMPRESSION TESTER EXTENSION HOSE Calibrate |
| 41358 | 2E-60 Calibrate | ATS PRO DIFFERENTIAL CYLINDER PRESSURE TESTER (LARGE BORE) Calibrate |
| 41359 | 2E-WARRANTY Calibrate | 5-YEAR CALIBRATION WARRANTY (2E & 2EM TESTERS) Calibrate |
| 41360 | 2E24H Calibrate | COMPRESSION TESTER EXTENSION HOSE Calibrate |
| 41361 | 2E60 Calibrate | ATS PRO DIFFERENTIAL CYLINDER PRESSURE TESTER (LARGE BORE) Calibrate |
| 41362 | 2EM-60 Calibrate | DIFFERENTIAL PRESSURE TESTER WITH MASTER ORIFICE Calibrate |
| 41363 | 2EM60 Calibrate | DIFFERENTIAL PRESSURE TESTER WITH MASTER ORIFICE Calibrate |
| 41364 | 2EWARRANTY Calibrate | 5-YEAR CALIBRATION WARRANTY (2E & 2EM TESTERS) Calibrate |
| 41365 | 2F1026-1 Calibrate | FITTING ADAPTOR Calibrate |
| 41366 | 2F10261 Calibrate | FITTING ADAPTOR Calibrate |
| 41367 | 2F1032 Calibrate | VALVE-HDCS Calibrate |
| 41368 | 2FLL7 Calibrate | TAP HANDLE Calibrate |
| 41369 | 2G7839 Calibrate | HOSE Calibrate |
| 41370 | 2G7899 Calibrate | STARTER DRAIN ADAPTER Calibrate |
| 41371 | 2G7899 Calibrate | "STARTER DRAIN ADAPTER Calibrate |
| 41372 | 2G7899 Calibrate | STARTER DRAIN ADAPTER Calibrate |
| 41373 | 2G7899 Calibrate | STARTER DRAIN ADAPTER Calibrate |
| 41374 | 2HL16 Calibrate | COUPLING Calibrate |
| 41375 | 2J-1865A Calibrate | JACK Calibrate |
| 41376 | 2J1865A Calibrate | JACK Calibrate |
| 41377 | 2K-GE-02 Calibrate | PMAT 2000 KIT GEAE CF-34 Calibrate |
| 41378 | 2KGE02 Calibrate | PMAT 2000 KIT GEAE CF-34 Calibrate |
| 41379 | 2KIPC-06 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 6-32 REF. 2KIPC-06 Calibrate |
| 41380 | 2KIPC06 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 6-32 REF. 2KIPC-06 Calibrate |
| 41381 | 2KIPF-3 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 10-32 REF. 2KIPF-3 Calibrate |
| 41382 | 2KIPF-4 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 1/4-28 REF. 2KIPF-4 Calibrate |
| 41383 | 2KIPF-5 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 5/16-24 REF. 2KIPF-5 Calibrate |
| 41384 | 2KIPF-6 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 3/8 -24 REF. 2KIPF-6 Calibrate |
| 41385 | 2KIPF3 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 10-32 REF. 2KIPF-3 Calibrate |
| 41386 | 2KIPF4 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 1/4-28 REF. 2KIPF-4 Calibrate |
| 41387 | 2KIPF5 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 5/16-24 REF. 2KIPF-5 Calibrate |
| 41388 | 2KIPF6 Calibrate | KATO TANGLESS REPLACEMENT PAWL SIZE 3/8 -24 REF. 2KIPF-6 Calibrate |
| 41389 | 2KPHC-06 Calibrate | INSTALLATION TOOL Calibrate |
| 41390 | 2KPHC-2 Calibrate | HAND TOOL Calibrate |
| 41391 | 2KPHC06 Calibrate | INSTALLATION TOOL Calibrate |
| 41392 | 2KPHC2 Calibrate | HAND TOOL Calibrate |
| 41393 | 2KPHF-3 Calibrate | "HELICOIL GAUGE STYLE (TANGLESS) Calibrate |
| 41394 | 2KPHF-4 Calibrate | HAND TOOL Calibrate |
| 41395 | 2KPHF-5 Calibrate | HAND INSTALLATION TOOL SIZE 5/16"-24 Calibrate |
| 41396 | 2KPHF-6 Calibrate | HAND INSTALLATION TOOL SIZE 3/8"-24 Calibrate |
| 41397 | 2KPHF-F8 Calibrate | TANGLESS PREWINDER HAND TOOL 1/2-20 Calibrate |
| 41398 | 2KPHF3 Calibrate | "HELICOIL GAUGE STYLE (TANGLESS) Calibrate |
| 41399 | 2KPHF3 Calibrate | HAND TOOL Calibrate |
| 41400 | 2KPHF4 Calibrate | HAND TOOL Calibrate |
