| Part Number | Tool Description |
|---|
| 201 | F1406705 Calibrate | PITOT HOLE CLEANER Calibrate |
| 202 | F141 Calibrate | SOCKET SHALLOW 3/8DR Calibrate |
| 203 | F181 Calibrate | SOCKET SHALLOW 3/8DR Calibrate |
| 204 | F70199-1 Calibrate | INFLATION TOOL - TIRE Calibrate |
| 205 | F72823-1 Calibrate | ADAPTADOR PRUEBAS CIRCUITO DE ESTÁTICA Calibrate |
| 206 | F72928-58 Calibrate | REGULATOR - AIR PRESSURE, ELEVATOR FEEL COMPUTER Calibrate |
| 207 | F72950-158 Calibrate | CART TRANSPORTATION APU Calibrate |
| 208 | F72977-62 Calibrate | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING Calibrate |
| 209 | F80222-11 Calibrate | PROTRACTOR - AILERON TAB ALIGNMENT Calibrate |
| 210 | FB 70-010-1B Calibrate | ENGINE STAND CRADLE Calibrate |
| 211 | FENT101 Calibrate | JACK NLG Calibrate |
| 212 | FT-20 Calibrate | POWER TOOLS SPLIT SLEEVE COLD EXOANSION FT-20 POWER PAK Calibrate |
| 213 | FTC-102 Calibrate | TOTAL AIR TEMPERATURE COVER, RED Calibrate |
| 214 | G-209-7/16 Calibrate | SHACKLE Calibrate |
| 215 | G-210–7/16 Calibrate | SHACKLE Calibrate |
| 216 | G-341–5/8 Calibrate | PEAR RING Calibrate |
| 217 | G32008-1 Calibrate | AXLE THREAD, MAIN & NOSE LANDING GEAR (ALL 747 NLG, ALL 747 BLG AND WLG Calibrate |
| 218 | GS4MT-E Calibrate | INSTALLATION TOOL - CABLE TIE ( USED WITH 0.18-INCH, 0.25-INCH, 0.31-INCH WIDE BANDS) Calibrate |
| 219 | GTP-1093HVO Calibrate | 1/8" HIGH VISIBILITY ORANGE GROUNDING CABLE - 1000 FT Calibrate |
| 220 | GTS301 Calibrate | 15/16 INCH SOCKET Calibrate |
| 221 | GTS361 Calibrate | 1 1/8 INCH SOCKET Calibrate |
| 222 | GTS381 Calibrate | 1 3/16 INCH SOCKET Calibrate |
| 223 | H21966-1000 Calibrate | EXTRACTOR FOR AC FITTED WITH OR NOT WITH THE T.P.I.S Calibrate |
| 224 | H46831 Calibrate | NLG BARREL NUT R/I ADAPTER Calibrate |
| 225 | H47682 Calibrate | A320/A320 NEO ADAPTOR-MLG Calibrate |
| 226 | HC-2279 Calibrate | OLEO PRESSURE GUAGE 0-5000 PSI (TRON AIR) Calibrate |
| 227 | HIX3008 Calibrate | PIN LOCK-OUT Calibrate |
| 228 | HIX4001 Calibrate | FAN REVERSER COWL PUMP Calibrate |
| 229 | HSK6263−1 Calibrate | HARTWELL DECOMPRESSION LATCH TESTER Calibrate |
| 230 | IAE1N20008 Calibrate | COVER - CNA Calibrate |
| 231 | IAE1N20400 Calibrate | COVER-INLET COWL ENGINE Calibrate |
| 232 | IAE2R19437 Calibrate | TEST SET BLEED VALVE Calibrate |
| 233 | J27028-21 Calibrate | LOCK - POWER CONTROL UNIT, RUDDER (NOTE: EFFECTIVITY OF J27028-14 FOR -200LR, -300ER & -F IS FOR ELE Calibrate |
| 234 | J32032-22 Calibrate | NLG / BLG / WLG AXLE SOCKET Calibrate |
| 235 | J47548 Calibrate | PROTECTOR NLG Calibrate |
| 236 | J47549 Calibrate | ADAPTOR NLG Calibrate |
| 237 | J4996 Calibrate | SET BALL HEX KEY METRIC 9 Calibrate |
| 238 | JMP/LUFT/D/4972/C500 Calibrate | CART - WATER WASH, ENGINE Calibrate |
| 239 | JMP/LUFT/D/4972/C800 Calibrate | CART - WATER WASH, ENGINE Calibrate |
| 240 | JP0103R Calibrate | SCRW DRIVER TIP 3' Calibrate |
| 241 | K32002-1 Calibrate | NLG PROTECTOR Calibrate |
| 242 | K32022-1 Calibrate | NLG AXLE SOCKET Calibrate |
| 243 | L-6 3/16 Calibrate | ALLEN WRENCH BERYLCO-BECU USA L-6 3/16 AMPCO ALRB Calibrate |
| 244 | LDH262 Calibrate | SOCKET SHALLOW 13/16 IN SIZE 3/4 IN DRIVE 12 Calibrate |
| 245 | LTCT13070 Calibrate | PULLER,MECHANICAL Calibrate |
| 246 | LTCT4568 Calibrate | PULLER, FORWARD SEAL Calibrate |
| 247 | M81969-1-02 Calibrate | CONNECTOR PIN INSERTION & EXTRACTION TOOL Calibrate |
| 248 | M81969/14-01 Calibrate | INSTALLING - REMOVAL TOOL Calibrate |
| 249 | MEN-26B-1223F Calibrate | NOSECAP, COLD WORK Calibrate |
| 250 | MF-50-B Calibrate | ADAPTER UNIVERSAL 1/2" FEMALE END X 1/2" MALE END Calibrate |
| 251 | MPC7A Calibrate | HEMOSTATE Calibrate |
| 252 | MS15461-3 Calibrate | 8” CRESCENT (WRENCH, ADJUSTABLE) Calibrate |
| 253 | NEC-1087 Calibrate | NEC-1087 IS A SPOT PROBE MANUFACTURED OR CATALOGUED BY HAWKER BEECHCRAFT Calibrate |
| 254 | OEX52B Calibrate | 16 COMBINATION WRENCH, 1" 5/8 Calibrate |
| 255 | P-1922 Calibrate | NLG SOCKET Calibrate |
| 256 | P2K-EMB-02 Calibrate | PMAT Calibrate |
| 257 | P611845 Calibrate | BRUSH GAUGE Calibrate |
| 258 | P74418-4 Calibrate | PITOT TEST ADAPTOR Calibrate |
| 259 | PF51−003 Calibrate | FISH POLE HOIST Calibrate |
| 260 | PF51−004 Calibrate | FISH POLE HOIST Calibrate |
| 261 | PF54124-3P Calibrate | CART - SERVICING, MIL-PRF-5606 Calibrate |
| 262 | PF55451-23 Calibrate | CART - SERVICING, MIL-PRF-5606 Calibrate |
| 263 | PH-1200 Calibrate | HEAT GUN (110V) Calibrate |
| 264 | PPC103A Calibrate | PIN PUNCH 3/32 Calibrate |
| 265 | PT-5501A Calibrate | ROTARY TOOL KIT W/ VARIABLE SPEED Calibrate |
| 266 | PWC30128-14 Calibrate | TRANSFER TUBE PULLER Calibrate |
| 267 | PWC30556 Calibrate | PULLER Calibrate |
| 268 | PWC37151 Calibrate | ADAPTER Calibrate |
| 269 | PWC40562 Calibrate | BRACKET, ADAPTER, ENGINE SLING Calibrate |
| 270 | PWC62827 Calibrate | ENGINE SPINNER PROTECTOR Calibrate |
| 271 | PWC64211-23 Calibrate | STRAP , FRONT Calibrate |
| 272 | PWC64211-31 Calibrate | STRAP , REAR Calibrate |
| 273 | PWC64241–10 Calibrate | GUIDE/ALIGNMENT PINS Calibrate |
| 274 | QD4R600A Calibrate | 100-600 FT.LB TORQUE WRENCH TOOL Calibrate |
| 275 | RR40SP Calibrate | ROLLER RATCHET 1/4" DRIV Calibrate |
| 276 | RR40SP Calibrate | ROLLER RATCHET 1/4" DRIV Calibrate |
| 277 | RSE 6417 Calibrate | FAN COWL LIFT SLING Calibrate |
| 278 | RST 1005 Calibrate | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING Calibrate |
| 279 | RST 1016 Calibrate | STAKING TOOL ROLLER BEARINGSTAKING TOOL ROLLER BEARING Calibrate |
| 280 | S-48 Calibrate | SCREWDRIVER 5L16 S-48 USA AMPCO ALRB Calibrate |
| 281 | S540MTD Calibrate | LOK-FAST JO-BOLT GUN Calibrate |
| 282 | SA-42 Calibrate | CARBINET MINIATURE BURRS SIZE 3/32" X 7/16 Calibrate |
| 283 | SDD2040NC Calibrate | SCREWDRIVER FLAT TIP Calibrate |
| 284 | SGFMN106 Calibrate | 6PCS SOFT GRIP HANDLE MINIATURE FILE SET Calibrate |
| 285 | SHDP22IRR Calibrate | SCRWEDRIVER Calibrate |
| 286 | TD2601-BF Calibrate | JO-BOLT GUN DRIVER 1/4 Calibrate |
| 287 | THD 428L Calibrate | KEENSERT TOOLS Calibrate |
| 288 | TM61A Calibrate | EXTENSION 1/4 DRIVE FLEX Calibrate |
| 289 | TMHBS10-10-00 Calibrate | BRACE-HOLD OPEN COWLS Calibrate |
| 290 | TS-420 Calibrate | TEST SET (LIGHT SYSTEM) Calibrate |
| 291 | TS200 Calibrate | ULTRASONIC TEST SET Calibrate |
| 292 | TS500 Calibrate | DUKANE ULB ULTRASONIC TESTER Calibrate |
| 293 | TT1000A Calibrate | BARFIELD ITT TEST BOX Calibrate |
| 294 | WO-1 X 1-1/8 Calibrate | OPEN-END WRENCH WO-1 X 1-1/8 AMPCO ALRB Calibrate |
| 295 | WO-1/2 X 5/8 Calibrate | OPEN-END WRENCH WO-1/2 X 5/8 AMPCO ALRB Calibrate |
| 296 | WO-3/8 X 7/16 Calibrate | OPEN-END WRENCH WO-3/8 X 7/16 AMPCO ALRB Calibrate |
| 297 | WT4999-9910 Calibrate | 1/4" SHANK DIAMOND POINT SET (10 PCS) Calibrate |
| 298 | XPR-9862E Calibrate | 7W EXPLOSION PROOF LED FLASHLIGHT - C1D1 - C2D1 - BATTERY RECHARGEABLE - SPOT/FLOOD - SOS STROBE Calibrate |
| 299 | - Calibrate | JACK - AXLE, MAIN GEAR (FOR BOEING 737) Calibrate |
| 300 | -- Calibrate | ACTUATOR LOCK ASSY-THRUST REVERSERACTUATOR CFM56-3 Calibrate |
| 301 | -97A27003000000 Calibrate | GAGE ASSY,PUSH-PULL Calibrate |
| 302 | : T900314-1 Calibrate | KIT-HTCS GROUND SUPPORT Calibrate |
| 303 | :ATIHSSSH40 Calibrate | THREADED SHANK DRILL BITS Calibrate |
| 304 | ??110-0430-100-02 Calibrate | SPECIAL TOOLS ALTIMETER TEST & PITOT STATIC Calibrate |
| 305 | ??98D56003001000 Calibrate | GSE TOOL Calibrate |
| 306 | .J32067-85 Calibrate | LARSON SYSTEM FLASH 48 TESTER Calibrate |
| 307 | '04-17 Calibrate | RIVET CUTTER Calibrate |
| 308 | '10/4180 Calibrate | HOIST FISHPOLE 200LB SWL Calibrate |
| 309 | 'MIT002A0016-1 Calibrate | KIT MISCELLANEOUS TOOL Calibrate |
| 310 | "0009629" Calibrate | THRUST REVERSER LIFT SLING Calibrate |
| 311 | "418W1017-20 Calibrate | STOP - TEST DOOR, PSU Calibrate |
| 312 | "C27051-29 Calibrate | LOCKOUT SET - LEADING EDGE SLATS AND KRUEGER FLAPS ACTUATOR Calibrate |
| 313 | "K32027-8 Calibrate | FARELESS HOSE ASSEMBLY RETRACT Calibrate |
| 314 | "OEX10B Calibrate | WRENCH, COMBINATION, 5/16"" Calibrate |
| 315 | "PWC51063 Calibrate | PULLER (SEAL CARRIER ) Calibrate |
| 316 | (509)736-2751 KIT INSPECT-8138 Calibrate | KIT INSPECTION (NEC-8138)737 Calibrate |
| 317 | (CALIB) 110-0430-100-02 Calibrate | TEST SET - RADIO ALTIMETER (CALIBRATION) Calibrate |
| 318 | (CALIB) 0-8000LBS Calibrate | TOOL - DYNAMOMETER 0-8000 LBS Calibrate |
| 319 | (CALIB) 00470-034-000 Calibrate | GAUGE (CALIBRATION) Calibrate |
| 320 | (CALIB) 01-0384-000 Calibrate | ALTIMETER TEST SET Calibrate |
| 321 | (CALIB) 01-1001-05 Calibrate | ANALYZER, DATABUS (CALIBRATION) Calibrate |
| 322 | (CALIB) 01-1001-12 Calibrate | DATA ANALYZER (CALIBRATION) Calibrate |
| 323 | (CALIB) 01-1400-00-230 Calibrate | ARINC 429/CSDB DATABUS (CALIBRATION) Calibrate |
| 324 | (CALIB) 02-7813C0100 Calibrate | JACK ADAPTER (CALIBRATION) Calibrate |
| 325 | (CALIB) 06-4005-0511 Calibrate | UNIT-HYDRAULIC RESERVOIR SERVICING (MIL-H-5606) MINERAL FLUID (CALIBRATION) Calibrate |
| 326 | (CALIB) 0622-19857-02 Calibrate | TEST TEST SET - VALVE ACTUATING (CALIBRATION) (CALIBRATION) Calibrate |
| 327 | (CALIB) 07-740-1100 Calibrate | BATTERY ANALYZER (CALIBRATION) Calibrate |
| 328 | (CALIB) 0987654321 Calibrate | TEST (CALIBRATION) Calibrate |
| 329 | (CALIB) 10-3641C3 Calibrate | FISH POLE KIT Calibrate |
| 330 | (CALIB) 1000005-005 Calibrate | CTS-700 SELCAL/ATSCALL TEST (CALIBRATION) Calibrate |
| 331 | (CALIB) 101-00164 Calibrate | PITOT STATIC TEST SET (MULTI) Calibrate |
| 332 | (CALIB) 101-00164-605 Calibrate | BARFIELD ANALOGIC PITOT TEST SET (CALIBRATION) Calibrate |
| 333 | (CALIB) 101-00169 Calibrate | PITOT STATIC TEST SET BARFIELD (CALIBRATION) Calibrate |
| 334 | (CALIB) 101-00184 Calibrate | PITOT STATIC TEST SET (CALIBRATION) Calibrate |
| 335 | (CALIB) 101-00212 Calibrate | PRESION DE COMB. (PRESSURE TESTER (CALIBRATION) Calibrate |
| 336 | (CALIB) 101-00260 Calibrate | FUEL GAGE TEST SET (CALIBRATION) Calibrate |
| 337 | (CALIB) 101-00540 Calibrate | FUEL QUALITY TEST SET BARFIELD (CALIBRATION) Calibrate |
| 338 | (CALIB) 101-00807 Calibrate | MODULE Calibrate |
| 339 | (CALIB) 101-00823 Calibrate | CONNECTOR TEST Calibrate |
| 340 | (CALIB) 101-00850 Calibrate | BARFIELD 101-00850 FUEL QUANTITY TEST SET, 10.4 IN L, 12.2 IN W, 5.3 IN H, 0 TO 400 PF, 4.5 LB (CALI Calibrate |
| 341 | (CALIB) 101-00901 Calibrate | BARFIELD INSTRUMENTS TT1000A TURBINE TEMPERATURE TESTER 101-00901 (CALIBRATION) Calibrate |
| 342 | (CALIB) 101-01170 Calibrate | TEST UNIT Calibrate |
| 343 | (CALIB) 101-01175 Calibrate | BARFIELD 101-01175 DIGITAL PITOT STATIC TEST SET, 9 IN L, 22.2 IN W, 14.8 IN H, 32 TO 122 DEG F (CAL Calibrate |
| 344 | (CALIB) 101-01200 Calibrate | BARFIELD 101-01200 SIGHT COMPASS, 3 IN L, 2.5 IN W, 3.1 IN H, +/-1 DEG, 0.72 LB (CALIBRATION) Calibrate |
| 345 | (CALIB) 10165446 Calibrate | DETECTOR ALTAIR 5X COLOR DISPL (CALIBRATION) Calibrate |
| 346 | (CALIB) 102-03108 Calibrate | BARFIELD 102-03108 MULTI-CABLE TENSIOMETER, 1/16 TO 1/4 IN DIA, 1-1/2 IN L, 4.38 IN W, 8-3/4 IN H (C Calibrate |
| 347 | (CALIB) 1047320 Calibrate | FIBER OPTIC ON WING KIT Calibrate |
| 348 | (CALIB) 10T-ICDI Calibrate | TORQUE WRENCH (CALIBRATION) Calibrate |
| 349 | (CALIB) 110-0430-100 Calibrate | RADIO ALTIMETER RAMP SIMULATOR (CALIBRATION) Calibrate |
| 350 | (CALIB) 110-0430-100-02 Calibrate | RADIO ALTIMETER DRA 707B1 (CALIBRATION) Calibrate |
| 351 | (CALIB) 1170205.01 Calibrate | PRESSURE GAUGE (CALIBRATION) Calibrate |
| 352 | (CALIB) 1180015.01 Calibrate | PRESSURE GAUGE (CALIBRATION) Calibrate |
| 353 | (CALIB) 12-602-8 Calibrate | TECHTEST ANTENNA TEST SET Calibrate |
| 354 | (CALIB) 1213 Calibrate | TRIPOD JACK-NOSE (CALIBRATION) Calibrate |
| 355 | (CALIB) 121630-006 Calibrate | REFLEX CHARGER RF80-K (CALIBRATION) Calibrate |
| 356 | (CALIB) 123020-001 Calibrate | ANALIZADOR DE BATERIA (CALIBRATION) Calibrate |
| 357 | (CALIB) 12900N Calibrate | WORKSHOP VERNIER CALIPER (CALIBRATION) Calibrate |
| 358 | (CALIB) 14-6807-6011 Calibrate | GAUGE,TIRE SERVICING (CALIBRATION) Calibrate |
| 359 | (CALIB) 14455-0100 Calibrate | CALIPER ELECTRONIC LIMIT (CALIBRATION) Calibrate |
| 360 | (CALIB) 1487.70 Calibrate | TRIPOD JACK 10T (CALIBRATION) Calibrate |
| 361 | (CALIB) 1686 Calibrate | COMPASS (CALIBRATION) Calibrate |
| 362 | (CALIB) 170207.02 Calibrate | PRESSURE GAUGE (CALIBRATION) Calibrate |
| 363 | (CALIB) 17080A Calibrate | GTT A350 CALIBRATION RECERTIFICATION ASSESSMENT Calibrate |
| 364 | (CALIB) 17TES0043 Calibrate | PORTABLE INTERFACE (PI) (CALIBRATION) Calibrate |
| 365 | (CALIB) 1811HAA0A Calibrate | BARFIELD 1811HAAOA PITOT STATIC TESTER, 14.9 IN L, 15.4 IN W, 9.76 IN H, 24 LB, 20 TO 650 KTS (CALIB Calibrate |
| 366 | (CALIB) 19280 Calibrate | WRIST STRAP TESTER Calibrate |
| 367 | (CALIB) 1TONX5 METER Calibrate | CHAIN HOIST (CALIBRATION) Calibrate |
| 368 | (CALIB) 20-0-20 Calibrate | METER,FIELD STRENGTH (CALIBRATION) Calibrate |
| 369 | (CALIB) 200951A Calibrate | ADAPTER NLG JACK (CALIBRATION) Calibrate |
| 370 | (CALIB) 2012B Calibrate | OSCILLOSCOPE (CALIBRATION) Calibrate |
| 371 | (CALIB) 20538-00 Calibrate | TESTER AND ANALYZER (CALIBRATION) Calibrate |
| 372 | (CALIB) 20549SI Calibrate | LOOP-CONTROLLER (CALIBRATION) Calibrate |
| 373 | (CALIB) 215371-0 Calibrate | DIGITAL PRESSURE GAUGE (CALIBRATION) Calibrate |
| 374 | (CALIB) 22097-00 Calibrate | TESTER (CALIBRATION) Calibrate |
| 375 | (CALIB) 22097.00 Calibrate | ULD TESTER (CALIBRATION) Calibrate |
| 376 | (CALIB) 2591553-901 Calibrate | CALIBRATION SET - STANDARD (CALIBRATION) Calibrate |
| 377 | (CALIB) 2591553-903 Calibrate | STANDBY COMPASS CALIBRATOR (CALIBRATION) (CALIBRATION) Calibrate |
| 378 | (CALIB) 2643G Calibrate | FUEL GAGE TEST SET (CALIBRATION) Calibrate |
| 379 | (CALIB) 2743638 (150-1000 IN.LBS) Calibrate | TORQUE WRENCH BR64469 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) Calibrate |
| 380 | (CALIB) 289 Calibrate | DIGITAL MULTIMETER (CALIBRATION) Calibrate |
| 381 | (CALIB) 290122-500 Calibrate | TESTER APU.. (CALIBRATION) Calibrate |
| 382 | (CALIB) 29333305 Calibrate | RAD KIT (CALIBRATION) Calibrate |
| 383 | (CALIB) 29333306 Calibrate | RADS-AT (CALIBRATION) Calibrate |
| 384 | (CALIB) 299897-0 Calibrate | DIGITAL PRESSURE GAUGE (CALIBRATION) Calibrate |
| 385 | (CALIB) 29AD40 Calibrate | DIGITAL CALIPER 0-12 (CALIBRATION) Calibrate |
| 386 | (CALIB) 29Z129 Calibrate | DIAL DEPTH GAUGE (POINTED) (CALIBRATION) Calibrate |
| 387 | (CALIB) 2C5122P01 Calibrate | FIXTURE, LPT ROTOR SEATING CHECK (CALIBRATION) Calibrate |
| 388 | (CALIB) 2C5186P01 Calibrate | FIXTURE, HPT ROTOR SEATING CHECK (CALIBRATION) Calibrate |
| 389 | (CALIB) 2C6487G01 Calibrate | PROTRACTOR ELECTRONI (CALIBRATION) Calibrate |
| 390 | (CALIB) 2C6983P08 Calibrate | THRUST REVERSER OPENING PUMP (CALIBRATION) Calibrate |
| 391 | (CALIB) 2SDR-501 Calibrate | TORQUE METER (CALIBRATION) Calibrate |
| 392 | (CALIB) 30-506 Calibrate | CRIMPMAST (CALIBRATION) Calibrate |
| 393 | (CALIB) 3000060035 Calibrate | DYNAMOMETER Calibrate |
| 394 | (CALIB) 30006-0076 Calibrate | DYNAMOMETER Calibrate |
| 395 | (CALIB) 300AGTI Calibrate | MANOMETER (CALIBRATION) Calibrate |
| 396 | (CALIB) 300ATI Calibrate | MANOMETER (CALIBRATION) Calibrate |
| 397 | (CALIB) 30446-0033 Calibrate | X/FGCOMP. INSPECTION EQUIPMENT (CALIBRATION) Calibrate |
| 398 | (CALIB) 31-MUL-1143 Calibrate | N1 SINGLE SPEED SIMULATOR (CALIBRATION) Calibrate |
| 399 | (CALIB) 320008B-S0 Calibrate | TIRE DEFLATION TOOL (CALIBRATION) Calibrate |
| 400 | (CALIB) 33120A Calibrate | FUNTION ARBITRARY WAVEFORM GENERATOR AGILENT TECH. (CALIBRATION) Calibrate |
