| Part Number | Tool Description |
|---|
| 33201 | 2-835-01-2130 Calibrate | PROBE Calibrate |
| 33202 | 2-835-01-2140 Calibrate | PROBE, NFE Calibrate |
| 33203 | 2-835-01-2145 Calibrate | PENCIL PROBE NFE, SHIELDED, ANGLED Calibrate |
| 33204 | 2-835-01-2216 Calibrate | PROBE HOLE PROBE - EDDY Calibrate |
| 33205 | 2-835-01-2500 Calibrate | PENCIL PROBE NFE, UNSHIELDED Calibrate |
| 33206 | 2-835-01-3000 Calibrate | FE PROBE - EDDY CURRENT-500 HZ-250 KHZ Calibrate |
| 33207 | 2-835-01-3100 Calibrate | PENCIL PROBE, SHIELDED, 90° ANG 25° SHAFT FE Calibrate |
| 33208 | 2-835-01-3130 Calibrate | PENCIL PROBE, 90° ANGLED, SHLD, FE Calibrate |
| 33209 | 2-835-01-9301 Calibrate | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL Calibrate |
| 33210 | 2-835-01-9330 Calibrate | CALIBRATION BLOCK Calibrate |
| 33211 | 2-835-01-9902 Calibrate | CABLE Calibrate |
| 33212 | 2-835-03-6902 Calibrate | PROBE Calibrate |
| 33213 | 2-835-07-6901 Calibrate | DEFECTOMETER SURFACE PROBE, 90°, .5" DROP, 5" LONG, .156" SHAFT, .098 TIP, SHIELDED, NON-FERROUS, 25 Calibrate |
| 33214 | 2-835-07-6902 Calibrate | SPECIAL SURFACE PROBE, 2MHZ, Ø.098 TUBING,TRIAX CONNECTOR Calibrate |
| 33215 | 2-835-69-200 Calibrate | DEFECTOMETER SURFACE PROBE, STRAIGHT, .098" DIAMETER, 3" LONG WITH .5" LONG TIP AND 2.5" HANDLE, SH Calibrate |
| 33216 | 2-835-69-2000 Calibrate | DEFECTOMETER SURFACE PROBE, STRAIGHT, .098" DIAMETER, 3" LONG WITH .5" LONG TIP AND 2.5" HANDLE, SH Calibrate |
| 33217 | 2-835-74-6901 Calibrate | ET HF PROBE, 2MHZ ABSOLUTE SHIELDED, 2.5 MM DIA, 45 DEGREES Calibrate |
| 33218 | 2-835-78-6900 Calibrate | PROBE Calibrate |
| 33219 | 2-835-99-2000 Calibrate | PROBE Calibrate |
| 33220 | 2-835-99-2130 Calibrate | PENCIL PROBE NFE, SHIELDED, Calibrate |
| 33221 | 2-887-01- 9313S Calibrate | SPLIT CONICAL CALIBRATION BLOCK Calibrate |
| 33222 | 2-887-01-9313S Calibrate | ALUMINUM SPLIT CONICAL CALIBRATION BLOCK 3-7 MM Calibrate |
| 33223 | 2-887-01-9314S Calibrate | ALUMINUM SPLIT CONICAL CALIBRATION BLOCK 7-14 MM Calibrate |
| 33224 | 2-887-01-9315S Calibrate | 2-887-01-9315S-UNK(SPLITTEDCONICALCALIB.STAND) Calibrate |
| 33225 | 2-887-01-9316S Calibrate | ALUMINUM SPLIT CONICAL CALIBRATION BLOCK 21-28 MM Calibrate |
| 33226 | 2-887-01-9319S Calibrate | CALIBRATION BLOCK Calibrate |
| 33227 | 2-887-01-9321S Calibrate | CALIBRATION BLOCK Calibrate |
| 33228 | 2-887-01-9323S Calibrate | CALIBRATION BLOCK Calibrate |
| 33229 | 2-887-01-9325S Calibrate | CALIBRATION BLOCK Calibrate |
| 33230 | 2-887-9325S Calibrate | CALIBRATION BLOCK Calibrate |
| 33231 | 2.069 Calibrate | SIGMATEST 2.069 EDDY CUREENT CONDUCTIVITY Calibrate |
| 33232 | 2.069.69-0001 Calibrate | PROBE TOOL Calibrate |
| 33233 | 2.069.69-0002 Calibrate | FLEX 8 MM CONDUCTIVITY PROBE, 90° SHORT HEAD, FLEX. GOOSE NECK SHAFT 2.069.69-0002 Calibrate |
| 33234 | 2.069US-D0101-T Calibrate | SIGMA TEST UNIT Calibrate |
| 33235 | 2.070 Calibrate | SIGMATEST Calibrate |
| 33236 | 2.070.69-0001 Calibrate | 8MM CONDUCTIVITY FLEX PROBE ADJUSTABLE HEAD Calibrate |
| 33237 | 2.164-551 Calibrate | CALIBRATION BLOCK Calibrate |
| 33238 | 2.832.01-2520 Calibrate | FLEXIBLE PROBE Calibrate |
| 33239 | 2.832.02-2455 Calibrate | LFEC PROBE , ABS, 90° ANGLED SHIELDED . FLEXIBLE NECK. B=11 C=30 Calibrate |
| 33240 | 2.835 99-2000 Calibrate | PROBE Calibrate |
| 33241 | 2.835-07-6902 Calibrate | EDDY CURRENT PROBE Calibrate |
| 33242 | 2.835-69-2000 Calibrate | PROBE NFE 2MHZ Calibrate |
| 33243 | 2.835-74-6901 Calibrate | EDDY CURRENT PROBE Calibrate |
| 33244 | 2.835.01-2000 Calibrate | SHIELDED STRAIGHT NFE PROBE Ø A = 4.0 MM. B= 12.5 MM Calibrate |
| 33245 | 2.835.01-2120 Calibrate | STRAIGHT PENCIL PROBE SHIELDED-NFE Calibrate |
| 33246 | 2.835.01-2140 Calibrate | ANGLE PROBE Calibrate |
| 33247 | 2.835.01-3130 Calibrate | ANGLE PROBE (98)FE Calibrate |
| 33248 | 2.835.01.2100 Calibrate | DEFECTOMETER SURFACE PROBE, 90°, .4" DROP, 7" LONG, .156" SHAFT, SHIELDED, NON-FERROUS, 25° BEND APP Calibrate |
| 33249 | 2.835.01.3000 Calibrate | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M Calibrate |
| 33250 | 2.835.07-6901 Calibrate | PROBE NFE Calibrate |
| 33251 | 2.835.69-2000 Calibrate | SHIELDED STRAIGHT NFE PROBE Ø A = 2.5 MM. B= 12.5 MM Calibrate |
| 33252 | 2.835.99-2000 Calibrate | SHIELDED STRAIGHT NFE PROBE Ø A = 4.0 MM. B= 60 MM Calibrate |
| 33253 | 2.837.01 Calibrate | CRACK STANDARD-NFE Calibrate |
| 33254 | 2.SUSM 560AT Calibrate | 5 MHZ TRANSDUCER Calibrate |
| 33255 | 2/045D TEWS C Calibrate | TURBINE ENGINE WASH SYSTEM Calibrate |
| 33256 | 2/045D-TEWS-C Calibrate | ENGINE FLUSH CART Calibrate |
| 33257 | 2/045DTEWSC Calibrate | TURBINE ENGINE WASH RIG Calibrate |
| 33258 | 20 Calibrate | (START STICK) Calibrate |
| 33259 | 20 - 106 LHN Calibrate | CLECO FASTENER Calibrate |
| 33260 | 20-0-20 Calibrate | METER FIELD GAUGE Calibrate |
| 33261 | 20-00480-0020-021 Calibrate | RETAINING PIN Calibrate |
| 33262 | 20-01070-0020-022 Calibrate | SHEAR PIN Calibrate |
| 33263 | 20-01080-0020-021 Calibrate | RETAINING PIN BC-FB Calibrate |
| 33264 | 20-01080-0020-022 Calibrate | SHEAR PIN BC PUSH/PULL Calibrate |
| 33265 | 20-01080-0020-025 Calibrate | SHEAR PIN BD TORQUE Calibrate |
| 33266 | 20-1-N Calibrate | COLD WORKING OVERSIZE KIT Calibrate |
| 33267 | 20-100 Calibrate | TORQUE WRENCH + 1/2'' SQUARE DRIVE RATCHET + CASE Calibrate |
| 33268 | 20-101-HD Calibrate | CLECO 3/32 20-101-HD Calibrate |
| 33269 | 20-101HD Calibrate | CLECO PHD SERIES 3/32 Calibrate |
| 33270 | 20-101HN Calibrate | CLECO HEX NUT 3/32" Calibrate |
| 33271 | 20-101LHN Calibrate | CLECO 3/32 20-101LHN Calibrate |
| 33272 | 20-101LWN Calibrate | CLECO 3/32 20-101LWN Calibrate |
| 33273 | 20-101MIN Calibrate | CLECO PMIN SERIES 3/32 Calibrate |
| 33274 | 20-102-HD Calibrate | CLECO 1/8 20-102-HD Calibrate |
| 33275 | 20-102HD Calibrate | CLECO PHD SERIES 1/8 Calibrate |
| 33276 | 20-102HN Calibrate | CLECO HEX NUT 1/8" Calibrate |
| 33277 | 20-102HN-1/8" Calibrate | KHN HEX-NUT DRAW CLECO 1/8" (0-1/2") Calibrate |
| 33278 | 20-102LHN Calibrate | CLECO 1/8 20-102LHN Calibrate |
| 33279 | 20-102LHN-1/8" Calibrate | KHNL HEX-NUT DRAW CLECO 1/8" (0-1") Calibrate |
| 33280 | 20-102LWN Calibrate | CLECO 1/8 20-102LWN Calibrate |
| 33281 | 20-102MIN Calibrate | CLECO PMIN SERIES 1/8 Calibrate |
| 33282 | 20-103-HD Calibrate | CLECO 5/32 20-103-HD Calibrate |
| 33283 | 20-103HD Calibrate | CLECO PHD SERIES 5/32 Calibrate |
| 33284 | 20-103HN Calibrate | CLECO HEX NUT 5/32" Calibrate |
| 33285 | 20-103LHN Calibrate | CLECO 5/32 20-103LHN Calibrate |
| 33286 | 20-103LHN-5/32" Calibrate | KHNL HEX-NUT DRAW CLECO 5/32" (0-1") Calibrate |
| 33287 | 20-103LWN Calibrate | CLECO 5/32 20-103LWN Calibrate |
| 33288 | 20-103MIN Calibrate | CLECO PMIN SERIES 5/32 Calibrate |
| 33289 | 20-104HD Calibrate | CLECO PHD SERIES 3/16 Calibrate |
| 33290 | 20-104HN Calibrate | CLECO HEX NUT 3/16" Calibrate |
| 33291 | 20-104HN-3/16" Calibrate | KHN HEX-NUT DRAW CLECO 3/16" (0-1/2") Calibrate |
| 33292 | 20-104LHN 3/16 Calibrate | CLECO FASTENER Calibrate |
| 33293 | 20-104LHN-3/16" Calibrate | KHNL HEX-NUT DRAW CLECO 3/16" (0-1") Calibrate |
| 33294 | 20-104LWN Calibrate | CLECO PLWN SERIES 3/16 Calibrate |
| 33295 | 20-104MIN Calibrate | CLECO PMIN SERIES 3/16 Calibrate |
| 33296 | 20-105HN Calibrate | CLECO SHORT 1/4'' Calibrate |
| 33297 | 20-106 Calibrate | CLECO 1/4 COPPER Calibrate |
| 33298 | 20-106HN Calibrate | CLECO HEX NUT 1/4" Calibrate |
| 33299 | 20-106LHN Calibrate | CLECO SHORT 1/4'' Calibrate |
| 33300 | 20-106LHN-1/4" Calibrate | KHNL HEX-NUT DRAW CLECO 1/4" (0-1") Calibrate |
| 33301 | 20-107HN Calibrate | CLECO SHORT 7/32'' Calibrate |
| 33302 | 20-107LHN Calibrate | CLECO SHORT 5/16'' Calibrate |
| 33303 | 20-108 Calibrate | CLECO PLIER WITH SOFT HANDLE 20-108 Calibrate |
| 33304 | 20-109 Calibrate | CLECO PNEUMATIC TOOL 20-109 Calibrate |
| 33305 | 20-112 Calibrate | NOVA CLECO INSTALLATION TOOL Calibrate |
| 33306 | 20-115 Calibrate | CLECO PNEUMATIC TOOL 20-115 Calibrate |
| 33307 | 20-127-4 Calibrate | 90º ANGLE HEAD 1/4 Calibrate |
| 33308 | 20-127-45-4 Calibrate | USATCO ANGLE DRILL ATTACHMENTS 90° ANGLE HEAD DE Calibrate |
| 33309 | 20-128-360 Calibrate | 360° SNAKE DRILL ATTACHMENT CAPACITY: 1/4 S Calibrate |
| 33310 | 20-128-4 Calibrate | SNAKE DRILL Calibrate |
| 33311 | 20-128-45-4 Calibrate | SNAKEDRILL-45' Calibrate |
| 33312 | 20-130-4 Calibrate | USATCO SNAKE DRILL ATTACHMENTS TYPE: 90° ANGLE HE Calibrate |
| 33313 | 20-134-1C Calibrate | 90° ANGLE HEAD WITH JACOBS CHUCK, 1/4” CAPACITY Calibrate |
| 33314 | 20-134-2C Calibrate | USATCO SNAKE DRILL (STRAIGHT HEAD WITH JACOBS CHUCK, 1/4") PN:20-134-2C Calibrate |
| 33315 | 20-14700 Calibrate | PLAIN BEARING CHUCK Calibrate |
| 33316 | 20-2-N Calibrate | COLD WORKING KIT Calibrate |
| 33317 | 20-200 Calibrate | CLECO PSG SERIES Calibrate |
| 33318 | 20-201 Calibrate | AVTECH TEST SET Calibrate |
| 33319 | 20-202 Calibrate | CLECO PSG SERIES Calibrate |
| 33320 | 20-203 Calibrate | CLECO PSG SERIES Calibrate |
| 33321 | 20-3-N Calibrate | COLD WORKING KIT TOOL Calibrate |
| 33322 | 20-30360 Calibrate | JACOBS HAND-TITE KEYLESS DRILLING CHUCKS Calibrate |
| 33323 | 20-30AWG Calibrate | WIRE CUTTING TOOL Calibrate |
| 33324 | 20-31038 Calibrate | JACOBS HAND-TITE KEYLESS DRILLING CHUCKS Calibrate |
| 33325 | 20-371 Calibrate | 3/8 CHUCK Calibrate |
| 33326 | 20-4010 Calibrate | COLLET CHUCKS #10 Calibrate |
| 33327 | 20-4011 Calibrate | USATCO COLLET CHUCKS SIZE/DIAMETER: #11 Calibrate |
| 33328 | 20-4014 Calibrate | COLLET CHUCK 1/4-28 THD FRACTIONAL SIZE 1/8" Calibrate |
| 33329 | 20-4015 Calibrate | COLLET CHUCK 1/4-28 THD FRACTIONAL SIZE 5/32" Calibrate |
| 33330 | 20-4016 Calibrate | COLLET CHUCK 1/4-28 THD FRACTIONAL SIZE 3/16" Calibrate |
| 33331 | 20-4018 Calibrate | COLLET Calibrate |
| 33332 | 20-4020 Calibrate | COLLET CHUCKS #20 Calibrate |
| 33333 | 20-4021 Calibrate | COLLET CHUCK 1/4-28 THD #21 D Calibrate |
| 33334 | 20-4030 Calibrate | COLLET CHUCKS #30 Calibrate |
| 33335 | 20-4040 Calibrate | COLLET CHUCKS #40 Calibrate |
| 33336 | 20-41318 Calibrate | COLLET CHUCKS #3/8 Calibrate |
| 33337 | 20-41516 Calibrate | COLLET CHUCKS #5/16 Calibrate |
| 33338 | 20-4500-7000 Calibrate | A/C OXYGEN BOSTER Calibrate |
| 33339 | 20-4502-6000 Calibrate | GSE 029 OXYGEN SERVICE REGULATOR Calibrate |
| 33340 | 20-4503-6000 Calibrate | ADAPTOR Calibrate |
| 33341 | 20-4503-6010 Calibrate | ADAPTOR Calibrate |
| 33342 | 20-4504-7000 Calibrate | CART, 4 BOTTLE OXY W/ REG(CE) Calibrate |
| 33343 | 20-4505-7000 Calibrate | BOTTLE CART Calibrate |
| 33344 | 20-4505−7000 Calibrate | OXYGEN SERVICE CART Calibrate |
| 33345 | 20-4521-9000 Calibrate | CARRO 1 CILINDRO INCLINABLE PARA N2 Calibrate |
| 33346 | 20-4523-000 Calibrate | CART: OXYGEN,4BOTTLE,W/BOOSTER,TILTABLE, Calibrate |
| 33347 | 20-4523-0000 Calibrate | 4 BOTTLE TILTING / TOWABLE OXYGEN CART - WITH REGULATOR & BOOSTER (CE) Calibrate |
| 33348 | 20-4524-0000 Calibrate | OXYGEN CART Calibrate |
| 33349 | 20-4525-0000 Calibrate | TILTABLE FOUR BOTTLE SERVICE CART Calibrate |
| 33350 | 20-4560-7000 Calibrate | OXYGEN BOOSTER PUMP Calibrate |
| 33351 | 20-520 Calibrate | KEYLESS CHUCK 3/8 CAPACITY 3/8-24 THD Calibrate |
| 33352 | 20-522 Calibrate | KEYLESS CHUCK 1/2 CAPACITY 3/8-24 THD Calibrate |
| 33353 | 20-541-9 Calibrate | COUNTERSINK GAUGE Calibrate |
| 33354 | 20-542-7 Calibrate | COUNTERSINK GAUGE Calibrate |
| 33355 | 20-6208 Calibrate | JACOBS® PLAIN BEARING CHUCKS AND CHUCK KEYS (KEY NUMBER: K30) (MODEL - PILOT SIZE: JACOBS® PLAIN BEA Calibrate |
| 33356 | 20-720 Calibrate | ANGLE DRILL ATT Calibrate |
| 33357 | 20-725 Calibrate | ANGLE DRILL ATTACHMENT 3/8" T 2-7/16 L 4-9/16 H STR Calibrate |
| 33358 | 20-730 Calibrate | ANGLE DRILL ATTACHMENT 3/8" T 3-3/4 L 1-1/8 H STR Calibrate |
| 33359 | 20-735 Calibrate | ANGLE DRILL ATTACHMENT 3/8" T 3-3/4 L 4-9/16 H STR Calibrate |
| 33360 | 20-745 Calibrate | 30 DEG. OFFSET T-THICKNESS 3/8 RIGHT Calibrate |
| 33361 | 20-820 Calibrate | ANGLE DRILL ATTACHMENT 1/4" T 2-7/16 L 1" H STR Calibrate |
| 33362 | 20-825 Calibrate | ANGLE DRILL ATTACHMENT 1/4" T 2-7/16 L 4-7/16 H STR Calibrate |
| 33363 | 20-830 Calibrate | ANGLE DRILL ATTACHMENT 1/4 T 3-3/4 L 1 H STR Calibrate |
| 33364 | 20-835 Calibrate | ANGLE DRILL ATTACHMENT 1/4" T 3-3/4 L 4-7/16 H STR Calibrate |
| 33365 | 20-845 Calibrate | ANGLE DRILL ATTACHMENT 1/4" T 4-1/8 H 50 RH Calibrate |
| 33366 | 20-855 Calibrate | ANGLE DRILL ATTACHMENT .29" TH 4-1/8 H LEFT OFFSET Calibrate |
| 33367 | 20-901 Calibrate | MAGNAFLUX SOUNDSAFE HIGH PERFORMANCE ULTRASONIC CO Calibrate |
| 33368 | 20-90424 Calibrate | IMPACT KEYLESS CHUCK 3/8" SQ DR, CAP 3/32"- 3/8" Calibrate |
| 33369 | 20-K0 Calibrate | K0 'T' HANDLE KEY - 1/8" Calibrate |
| 33370 | 20-K1 Calibrate | CHUCK KEY PILOT SIZE 5/32" THUMB HANDLE Calibrate |
| 33371 | 20-K30 Calibrate | CHUCK KEYS Calibrate |
| 33372 | 20-K32 Calibrate | CHUCK KEY 1/4 Calibrate |
| 33373 | 20-T-21 Calibrate | ANGLE DRILL ATT Calibrate |
| 33374 | 20-T-23 Calibrate | THIN OFFSET ANGLE DRILL Calibrate |
| 33375 | 20-T-235 Calibrate | FLAT OFFSET ANGLE DRILL ATTACHMENTS H'''' OVERALL HE Calibrate |
| 33376 | 20-T-25 Calibrate | FLAT OFFSET ANGEL DRILL ATTACHMETS Calibrate |
| 33377 | 20-T-635 Calibrate | SNAKE DRILL ATTACH. Calibrate |
| 33378 | 20.4505.7000 Calibrate | OXYGEN BOTTLE CART Calibrate |
| 33379 | 20−4505−7000 Calibrate | OXYGEN SERVICE CART Calibrate |
| 33380 | 200 Calibrate | HUCK (INSTALLATION TOOLS) Calibrate |
| 33381 | 200 909-CA Calibrate | MLG JACK ADAPTER Calibrate |
| 33382 | 200 910-CA Calibrate | HYDRAULIC JACK Calibrate |
| 33383 | 200-000-101 Calibrate | C130 QEC DOLLY Calibrate |
| 33384 | 200-000-102 Calibrate | ADAPTER ASSY KIT QEC DOLLY 30 Calibrate |
| 33385 | 200-000-104 Calibrate | ENGINE DOLLY Calibrate |
| 33386 | 200-03-00 Calibrate | PITOT COVERS, AOA'S, TAT COVER SET, HEAT RESISTANT TYPE (SET OF 6) Calibrate |
| 33387 | 200-150 Calibrate | HOSE LINE Calibrate |
| 33388 | 200-321-00 Calibrate | SLING CARGO Calibrate |
| 33389 | 200-450-1 Calibrate | ADAPTER Calibrate |
| 33390 | 200-6448-01 Calibrate | ANTENNA ADAPTER Calibrate |
| 33391 | 200/HUCK Calibrate | GUN,HUCK Calibrate |
| 33392 | 2000 Calibrate | EDDY CURRENT EQUIPMENT NORTEC Calibrate |
| 33393 | 2000-01 Calibrate | DREMEL BUTANE SOLDER IRON Calibrate |
| 33394 | 2000-010 Calibrate | COCKPIT/NOSE COVER Calibrate |
| 33395 | 2000-0186 Calibrate | SEAL RUBBER Calibrate |
| 33396 | 2000-1 Calibrate | MULTITEST PREMIER CALIBRATION Calibrate |
| 33397 | 2000-105 Calibrate | INTAKE COVERS (ATTACHES TO LOUVERS) (SET Calibrate |
| 33398 | 2000-12-02 Calibrate | TRANSDUCER, TORQUE Calibrate |
| 33399 | 2000-13-02 Calibrate | TRANSDUCER KIT 1000FTLB Calibrate |
| 33400 | 2000-14-02 Calibrate | TRANSDUCER HIGH TO Calibrate |
