| Part Number | Tool Description |
|---|
| 264001 | STD-753 Calibrate | FORCE GAUGES 0-25LB Calibrate |
| 264002 | STD-755 Calibrate | SCALE, PUSH-PULL SPR Calibrate |
| 264003 | STD-765 Calibrate | SCRAPER - PLASTIC Calibrate |
| 264004 | STD-7653 Calibrate | TOOL Calibrate |
| 264005 | STD-77 Calibrate | AIR SOURCE-REGULATED, DRY FILTERED, 0-50 PSIG Calibrate |
| 264006 | STD-810 Calibrate | SPATULLA Calibrate |
| 264007 | STD-858 Calibrate | TAG - DO NOT OPERATE Calibrate |
| 264008 | STD-94 Calibrate | BAG - VACUUM Calibrate |
| 264009 | STD-997 Calibrate | WRENCH - SPEED, 3/8 INCH SQUARE DRIVE Calibrate |
| 264010 | STD.585 Calibrate | MAT INLET ENGINE Calibrate |
| 264011 | STD1055 Calibrate | CONTAINER - OIL RESISTANT, 5 GALLON Calibrate |
| 264012 | STD1055 Calibrate | CONTAINER-OIL RESISTANT Calibrate |
| 264013 | STD1057 Calibrate | AIR SOURCE Calibrate |
| 264014 | STD1058 Calibrate | CONTAINER - OIL RESISTANT, 1 GALLON, (4 LITERS) Calibrate |
| 264015 | STD1064 Calibrate | SCRAPER - PHENOLIC, HARD RESIN Calibrate |
| 264016 | STD1086 Calibrate | GLOVES RUBBER Calibrate |
| 264017 | STD1095 Calibrate | CRANE – LIFT, 2000 LB CAPACITY, 30 FOOT HEIGHT Calibrate |
| 264018 | STD1097 Calibrate | CALIPER - VERNIER, 0-6 INCH, READABLE TO 1/1000 INCH Calibrate |
| 264019 | STD1103 Calibrate | HOSE Calibrate |
| 264020 | STD1119 Calibrate | TOOL Calibrate |
| 264021 | STD1125 Calibrate | TOOL Calibrate |
| 264022 | STD1128 Calibrate | COVERALLS-COTTON Calibrate |
| 264023 | STD1130 Calibrate | CAP - PROTECTIVE 1/2-20 THREAD Calibrate |
| 264024 | STD1130 Calibrate | CAP PROTECTIVE, FLARELESS TUBE, 1/2-20 THREAD Calibrate |
| 264025 | STD1131 Calibrate | PLUG Calibrate |
| 264026 | STD1131 Calibrate | PLUG PROTECTIVE, FLARELESS TUBE, 1/2-20 THREAD Calibrate |
| 264027 | STD1132 Calibrate | GAUGE TIRE PRESSURE Calibrate |
| 264028 | STD1137 Calibrate | GLASSES - SAFETY Calibrate |
| 264029 | STD1144 Calibrate | TOOL Calibrate |
| 264030 | STD1146 Calibrate | PAD PROTECTIVE EVACU Calibrate |
| 264031 | STD1146 Calibrate | PADPROTECTIVEEVACU Calibrate |
| 264032 | STD1148 Calibrate | 150PSI DRY FILTER REGULATED AIR INCL. 1,5M HOSE AN6 AN5 AND AN4 ADAPTOR Calibrate |
| 264033 | STD1148 Calibrate | TOOL Calibrate |
| 264034 | STD1154 Calibrate | CONTAINER - OIL RESISTANT, 19L Calibrate |
| 264035 | STD1157 Calibrate | GAUGE - PRESSURE, 0-3000 PSIG (0-20685 KPA) Calibrate |
| 264036 | STD1157 Calibrate | PRESSURE GAUGE Calibrate |
| 264037 | STD1160 Calibrate | STAND - CABIN AND GENERAL ACCESS STAND Calibrate |
| 264038 | STD1160 Calibrate | STD-1160 Calibrate |
| 264039 | STD1168 Calibrate | CAP Calibrate |
| 264040 | STD1168 Calibrate | CAP - SHORTING OR FARADAY CAP Calibrate |
| 264041 | STD1168 Calibrate | CAP - SHORTINGFARADAY CAP Calibrate |
| 264042 | STD1168 Calibrate | SIZE 10 SHORTING CAP / FARADAY CAP Calibrate |
| 264043 | STD1168 Calibrate | TOOL Calibrate |
| 264044 | STD1174 Calibrate | DRAIN SNAKE 15FT X 6MM Calibrate |
| 264045 | STD1174 Calibrate | SNAKE-PLUMBERS Calibrate |
| 264046 | STD1176 Calibrate | COVER - WINDSHIELD BLACKOUT SCREEN Calibrate |
| 264047 | STD1179 Calibrate | TESTER - PYROMETER Calibrate |
| 264048 | STD1184 Calibrate | SCALE - SPRING, 0-100 LBS, TENSION Calibrate |
| 264049 | STD1184 Calibrate | SCALE - SPRING, 0-100 LBS, TENSION Calibrate |
| 264050 | STD123 Calibrate | BRUSH - SOFT BRISTLE Calibrate |
| 264051 | STD1238 Calibrate | DIAL INDICATOR Calibrate |
| 264052 | STD1238 Calibrate | INDICATOR DIAL Calibrate |
| 264053 | STD12395 Calibrate | TOOL Calibrate |
| 264054 | STD1278 Calibrate | BLOCK Calibrate |
| 264055 | STD1279 Calibrate | TOOL Calibrate |
| 264056 | STD1279 Calibrate | DIAL INDICATOR Calibrate |
| 264057 | STD1279 Calibrate | HOLDER WITH WHEELS FOR DIAL INDICATOR 12,5MM Calibrate |
| 264058 | STD1279 Calibrate | MOUNT Calibrate |
| 264059 | STD1279 Calibrate | MOUNT - DEVICE Calibrate |
| 264060 | STD1279 Calibrate | MOUNT - DEVICE, MOUNTING, HOLDS THE DIAL INDICATOR Calibrate |
| 264061 | STD1279 Calibrate | MOUNT DEVICE Calibrate |
| 264062 | STD1279 Calibrate | TOOL Calibrate |
| 264063 | STD1280 Calibrate | SOURCE AIR REGULATOR Calibrate |
| 264064 | STD1301 Calibrate | CONTAINER - HYDRAULIC FLUID RESISTANT, 50 GALLON Calibrate |
| 264065 | STD1303 Calibrate | CALIPER - DIAL Calibrate |
| 264066 | STD1325 Calibrate | SOURCE - PRESSURE, CAPABLE OF SUPPLYING 35 /- 5 PSIG Calibrate |
| 264067 | STD1336 Calibrate | THERMOMETER - DIGITAL, 0-150 /- 2 DEGREES F, WITH A PROBE, THERMOCOUPLEEQUIVALENT Calibrate |
| 264068 | STD13877 Calibrate | VACUUM CLEANER Calibrate |
| 264069 | STD13898 Calibrate | HEADSET WITH BOOM MIC AND TWO-PRONG PLUG Calibrate |
| 264070 | STD1390 Calibrate | HEADPHONE - 600 OHM, WITH 1/4 INCH MONO RCA AUDIO PLUG Calibrate |
| 264071 | STD1397 Calibrate | FORCEGUAGE Calibrate |
| 264072 | STD1397 Calibrate | GAUGE - FORCE STD-1397 Calibrate |
| 264073 | STD1398 Calibrate | JACKS Calibrate |
| 264074 | STD1400 Calibrate | BORESCOPE - FLEXIBLE, 4MM, DIRECT VIEW Calibrate |
| 264075 | STD14434 Calibrate | "TAPE MEASURE - FLEXIBLE STEEL Calibrate |
| 264076 | STD14434 Calibrate | TAPE MEASURE - FLEXIBLE STEEL Calibrate |
| 264077 | STD14686 Calibrate | CAP PROTECTIVE, FLARELESS TUBE, 1/2-20 THREAD Calibrate |
| 264078 | STD14686 Calibrate | FASTENER SET (ALTERNATIVE: STD-1130STD-113153100528) Calibrate |
| 264079 | STD14686 Calibrate | FITTINGS- HYDRAULIC, CAPS/ PLUGS Calibrate |
| 264080 | STD14686 Calibrate | HYDRAULIC CAPS/PLUGS KIT Calibrate |
| 264081 | STD14686 Calibrate | TOOL Calibrate |
| 264082 | STD149 Calibrate | CAP AND PLUG - NAS834 Calibrate |
| 264083 | STD203 Calibrate | CONTAINER OIL RESISTANT Calibrate |
| 264084 | STD2493 Calibrate | HOIST - OVERHEAD, CAPACITY 10,000 LB Calibrate |
| 264085 | STD252 Calibrate | CRIMPING Calibrate |
| 264086 | STD252 Calibrate | FERRULE CRIMPING TOOL Calibrate |
| 264087 | STD252 Calibrate | CRIMPING Calibrate |
| 264088 | STD291 Calibrate | DRIFT – LIGHT WEIGHT, METALPLASTIC Calibrate |
| 264089 | STD3911 Calibrate | TOOL Calibrate |
| 264090 | STD3926 Calibrate | WATER SOURCE - COLD, REGULATED, 0 TO 60 PSIG (4 BAR) Calibrate |
| 264091 | STD3926 Calibrate | WATER SOURCE - COLD, REGULATED, 0 TO 60 PSIG (4 BAR) (SCANAEROTECH) Calibrate |
| 264092 | STD3940 Calibrate | 0-150PSIG AIR SOURCE Calibrate |
| 264093 | STD3940 Calibrate | 0-150PSIG AIR SOURCE - DRY FILTERED REGULATOR W. 1,5M HOSE” PN: STD-3940 Calibrate |
| 264094 | STD3940 Calibrate | AIR SOURCE - REGULATED, DRY FILTERED, 0-150 PSIG Calibrate |
| 264095 | STD3940 Calibrate | AIR SOURE FILTERED DRY Calibrate |
| 264096 | STD3940 Calibrate | IR SOURCE-REGULATED, DRY FILTERED Calibrate |
| 264097 | STD3940 Calibrate | TOOL Calibrate |
| 264098 | STD4050 Calibrate | DETECTOR KIT Calibrate |
| 264099 | STD438 Calibrate | GUN - GREASE Calibrate |
| 264100 | STD5468 Calibrate | FEELER GAUGE Calibrate |
| 264101 | STD5468 Calibrate | FEELER GAUGE 0.002 TO 0.008 INCH Calibrate |
| 264102 | STD5484 Calibrate | HYDRAULIC SERVICE CART - PRESSURES OF 0-3000 PSI FILTERED TO 15 MICRONS ABSOLUTE Calibrate |
| 264103 | STD5505 Calibrate | SPRING SCALE Calibrate |
| 264104 | STD585 Calibrate | MAT INLET ENGINE Calibrate |
| 264105 | STD585 Calibrate | FANLUBE PROTECTIVE MAT 4’X5’X3/8” Calibrate |
| 264106 | STD585 Calibrate | CFM LEAP PROTECTIVE MAT Calibrate |
| 264107 | STD585 Calibrate | ENGINE INLET MAT Calibrate |
| 264108 | STD585 Calibrate | ENGINE PROTECTIVE Calibrate |
| 264109 | STD585 Calibrate | ENGINE PROTECTIVE MAT Calibrate |
| 264110 | STD585 Calibrate | MAT - PROTECT., 3/8 9MM MIN. THICK., MIN. 42X60 Calibrate |
| 264111 | STD585 Calibrate | MAT - PROTECT., 3/8"(9MM)
MIN. THICK., MIN.
42X60"(1X1.5M) WARNING
STREAMERS Calibrate |
| 264112 | STD585 Calibrate | MAT - PROTECTIVE, 3/8 INCH (9.5 MM) MIN Calibrate |
| 264113 | STD585 Calibrate | MAT - PROTECTIVE, CLOSED CELL NEOPRENE Calibrate |
| 264114 | STD585 Calibrate | MAT INLET ENGINE Calibrate |
| 264115 | STD585 Calibrate | MAT PROTECTION INTAK Calibrate |
| 264116 | STD585 Calibrate | MAT PROTECTIVE Calibrate |
| 264117 | STD585 Calibrate | MAT PROTECTIVE. WE REQUIRE THICKNESS OF 10MM Calibrate |
| 264118 | STD585 Calibrate | MAT- PROTECTIVE, CLOSED CELL NEOPROPENE, 30-50 DURO, WEATHER AND OIL RESISTANT, 3/8 INCH MIN THICKNE Calibrate |
| 264119 | STD585 Calibrate | MAT-PROTECTIVE Calibrate |
| 264120 | STD585 Calibrate | PROTECTIVE CARPET Calibrate |
| 264121 | STD585 Calibrate | PROTECTIVE MAT Calibrate |
| 264122 | STD585 Calibrate | PROTECTIVE MATS ASSY Calibrate |
| 264123 | STD585 Calibrate | TOOL Calibrate |
| 264124 | STD6111 Calibrate | LOAD MEASURING DEVICE 0-1000LB /- 2 Calibrate |
| 264125 | STD622 Calibrate | PAD - PROTECTIVE Calibrate |
| 264126 | STD6378 Calibrate | PROTECTIVE MAT Calibrate |
| 264127 | STD6378 Calibrate | 1” THICK, WITH WARNING STREAMER ATTACHED – GRADE SC43, NEOPRENE SPONGE Calibrate |
| 264128 | STD6378 Calibrate | ENGINE PROTECTIVE MAT Calibrate |
| 264129 | STD6378 Calibrate | MAT INLET COWL ENGIN Calibrate |
| 264130 | STD6378 Calibrate | PROTECTIVE MAT Calibrate |
| 264131 | STD6378 Calibrate | PROTECTIVE MAT - RUBBER, MANUFACTURERS ASSOCIATION Calibrate |
| 264132 | STD6378 Calibrate | PROTECTIVE MAT - RUBBER, MANUFACTURERS ASSOCIATION, GRADE SC43,NEOPRENE SPONGE, 1 INCH THICK, APPROX Calibrate |
| 264133 | STD6378 Calibrate | PROTECTIVE MAT-RUBBER, GRADE SC43 NEOPRENE SPONGE 1’’ THICK, 3X4 FEET WITH WARMING STREAMER ATTACHED Calibrate |
| 264134 | STD6636 Calibrate | VACCUM CLEANER Calibrate |
| 264135 | STD6636 Calibrate | VACUUM CLEANER - WET AND DRY TYPE Calibrate |
| 264136 | STD664 Calibrate | PLIERS-TEFLON JAWED Calibrate |
| 264137 | STD7000 Calibrate | STD7000 ARINC BUS CONTROLLER PN: STD-7000 Calibrate |
| 264138 | STD7340 Calibrate | PIN ASSY Calibrate |
| 264139 | STD7394 Calibrate | CAP - DUST, ELECTRICAL CONNECTOR Calibrate |
| 264140 | STD745 Calibrate | ROLLER - HARD RUBBER Calibrate |
| 264141 | STD753 Calibrate | FORCE GAUGES 0-25LB Calibrate |
| 264142 | STD753 Calibrate | SCALE - PUSH/PULL Calibrate |
| 264143 | STD753 Calibrate | SCALE - PUSH/PULL, 0-25 POUND (0-11 KILOGRAM) CAPACITY, 1/4 POUND (113 GRAM) ACCURACY Calibrate |
| 264144 | STD753 Calibrate | SCALE - PUSH/PULL, 0-25 POUND (0-11 KILOGRAM) CAPACITY, 1/4 POUND (113 GRAM) ACCURACY Calibrate |
| 264145 | STD753 Calibrate | SCALE, PUSH-PULL SPR Calibrate |
| 264146 | STD753 Calibrate | SCALE,PUSH-PULLSPR Calibrate |
| 264147 | STD753 Calibrate | SPRING SCALE Calibrate |
| 264148 | STD753 Calibrate | TOOL Calibrate |
| 264149 | STD755 Calibrate | SCALE, PUSH-PULL SPR Calibrate |
| 264150 | STD765 Calibrate | SCRAPER - PLASTIC Calibrate |
| 264151 | STD7653 Calibrate | TOOL Calibrate |
| 264152 | STD77 Calibrate | AIR SOURCE-REGULATED, DRY FILTERED, 0-50 PSIG Calibrate |
| 264153 | STD810 Calibrate | SPATULLA Calibrate |
| 264154 | STD810 Calibrate | TRAVEL COVER, LIGHT WEIGHT CANOPY COVER, BUBBLE CA Calibrate |
| 264155 | STD858 Calibrate | TAG - DO NOT OPERATE Calibrate |
| 264156 | STD858 Calibrate | TAG - DO NOT OPERATE Calibrate |
| 264157 | STD94 Calibrate | BAG - VACUUM Calibrate |
| 264158 | STD997 Calibrate | WRENCH - SPEED, 3/8 INCH SQUARE DRIVE Calibrate |
| 264159 | STDA3 Calibrate | ALUMINUM A3 CERTIFIED COATED METAL PLATES STANDARD Calibrate |
| 264160 | STDN 12-1 Calibrate | COLD WORKING KIT (SPLIT SLEEVE PROCESS) Calibrate |
| 264161 | STDN 12-1 Calibrate | SPLIT SLEEVE PROCESS KIT Calibrate |
| 264162 | STDN 12-2 Calibrate | SPLIT MANDREL PROCESS KIT Calibrate |
| 264163 | STDN 12-2-N Calibrate | COLD BORE EXPANSION KIT 8-2-N Calibrate |
| 264164 | STDN 18-3-N Calibrate | COLD WORKING KIT Calibrate |
| 264165 | STDN 20-0-N Calibrate | COLD WORKING KIT Calibrate |
| 264166 | STDN 20-1-N Calibrate | COLDWORKING KIT Calibrate |
| 264167 | STDN 20-2-N Calibrate | COLDWORKING KIT Calibrate |
| 264168 | STDN 20-3-N Calibrate | COLDWORKING KIT Calibrate |
| 264169 | STDN 22-0-N Calibrate | COLDWORKING KIT Calibrate |
| 264170 | STDN 22-1-N Calibrate | COLDWORKING KIT Calibrate |
| 264171 | STDN 22-2-N Calibrate | COLDWORKING KIT Calibrate |
| 264172 | STDN 22-3-N Calibrate | COLDWORKING KIT Calibrate |
| 264173 | STDN 26-3-N Calibrate | COLD EXPANSION TOOL INCLUDING PULLER, POWER PACK AND SLEEVE P/N: P/N CBS-26-3-N-16F Calibrate |
| 264174 | STDN 6-0-N Calibrate | COLD WORKING KIT Calibrate |
| 264175 | STDN 6-3-N Calibrate | COLD WORKING KIT Calibrate |
| 264176 | STDN10-2-N Calibrate | COLD EXPANSION KIT Calibrate |
| 264177 | STDN102N Calibrate | COLD EXPANSION KIT Calibrate |
| 264178 | STDN12-1 Calibrate | COLD WORK TOOLING Calibrate |
| 264179 | STDN12-2 Calibrate | COLD WORK TOOLING Calibrate |
| 264180 | STDN121 Calibrate | COLD WORKING KIT (SPLIT SLEEVE PROCESS) Calibrate |
| 264181 | STDN121 Calibrate | SPLIT SLEEVE PROCESS KIT Calibrate |
| 264182 | STDN121 Calibrate | COLD WORK TOOLING Calibrate |
| 264183 | STDN121 Calibrate | COLD WORKING KIT (SPLIT SLEEVE PROCESS) Calibrate |
| 264184 | STDN122 Calibrate | SPLIT MANDREL PROCESS KIT Calibrate |
| 264185 | STDN122 Calibrate | COLD WORK TOOLING Calibrate |
| 264186 | STDN122 Calibrate | SPLIT MANDREL KIT Calibrate |
| 264187 | STDN122N Calibrate | COLD BORE EXPANSION KIT 8-2-N Calibrate |
| 264188 | STDN122N Calibrate | TOOK KIT Calibrate |
| 264189 | STDN183N Calibrate | COLD WORKING KIT Calibrate |
| 264190 | STDN200N Calibrate | COLD WORKING KIT Calibrate |
| 264191 | STDN201N Calibrate | COLDWORKING KIT Calibrate |
| 264192 | STDN202N Calibrate | COLDWORKING KIT Calibrate |
| 264193 | STDN203N Calibrate | COLDWORKING KIT Calibrate |
| 264194 | STDN220N Calibrate | COLDWORKING KIT Calibrate |
| 264195 | STDN221N Calibrate | COLDWORKING KIT Calibrate |
| 264196 | STDN222N Calibrate | COLDWORKING KIT Calibrate |
| 264197 | STDN223N Calibrate | COLDWORKING KIT Calibrate |
| 264198 | STDN263N Calibrate | COLD EXPANSION TOOL INCLUDING PULLER, POWER PACK AND SLEEVE P/N: P/N CBS-26-3-N-16F Calibrate |
| 264199 | STDN263N Calibrate | TOOL KIT Calibrate |
| 264200 | STDN60N Calibrate | COLD WORKING KIT Calibrate |
