Tool Description: Part

Partial Match

Tool #

Description

In Stock

Our Sources

For Aircraft*

Photos

Add to Request

AF-4125/100H

Description: CUSTOM REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of Conform...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4131/500H

Description: LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.35"Ø O.D.x.850"Ø I.D. WITH A TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4183

Description: LOW FREQUENCY RING PROBE 100Hz-8 KHz, .850"Ø(18mm) OD x .400"Ø(7.6mm) ID x., WITH TRIAX FISCHER CONNECTOR. . Includes Test Report and Certificate of Conformance. Reference: USED WITH NDT732A, 777 Part 6 55-17-03

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4221/TF

Description: ROHMANN LOW FREQUENCY ABSOULUTE / REFLECTION SPOT PROBE, 100Hz-10KHz, 43.5mm(.1.70" LONG) x 16.0mm(.630")Ø SUPPLIED WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: BAe 53-20-01 Part 6

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-4222/TF

Description: ROHMANN ABSOULUTE / REFLECTION PENCIL PROBE, FREQUENCY RANGE 20Hz-6MHz, 100mm(.3.94")LONG, SUPPLIED WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: BAe 53-10-20 Part 6 Page 9

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5036G1

Description: PROBE GUIDE Material: Delrin. Diameter 0.430 ±0.025 (10.92mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5036G2

Description: PROBE GUIDE Material: Delrin. Diameter 0.515 ±0.025 (13.08mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5257G

Description: PROBE GUIDE Material: Lucite. Diameter 1.50" ±0.02 . Used in Boeing procedure 55-10-27 Part 6. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5271

Description: CUSTOM FLEX SHAFT PROBE, 9.8mmØ(.386") 500KHz, 12.20"(310mm) LONG SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: Airbus A300-600 Part 6 57-10-35 page 606 Figure 604

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-5278/TF

Description: HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-6012

Description: FIXED SLIDING PROBE,1KHz-100KHz REFLECTION, 1.5" Long x .800" Wide X 1.0" High, TRIAX FISCHER CONNECTOR (NEC1059,SPO-3806). PART 6 53-10-03. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-6014

Description: SLIDING PROBE 500Hz-80KHz REFLECTION WITH TRIAX FISCHER CONNECTOR. 737 PART 6 53-10-52

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AF-MBB403-7-1

Description: CUSTOM STAINLESS STEEL EDDY CURRENT ROTARY PROBE INCLUDING COLLAR, FREQUENCY 100KHz-2MHz WITH 4 PIN FISCHER CONNECTOR. REFERENCE: AIRBUS A300-600 FIGURE 603 PART 6 53-19-27 PAGE 604 PROCEDURE A. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-5006

Description: CUSTOM 767 PART 4 57-50-05 10MHZ SPRING LOADED LONGITUDINAL WAVE TRANSDUCER. (TEK-5006)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFC-5007

Description: CUSTOM 767 PART 4 57-50-05 10MHZ LONGITUDINAL WAVE TRANSDUCER. (TEK-5007)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-1004

Description: ULTRASONIC KIT- OUTBOARD MIDFLAP CARRIAGE SPINDLES. B737 PART 4 57-50-02. INCLUDES NDT3038, NDT3038-P1, SUC 166-8T (AFC-525-8T) ABNC-MD6 (BNC-MICRODOT CABLE), 8 OZ BOTTLE COUPLANT.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-1014

Description: Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-1030

Description: Cusom Ultrasonic Inspection Kit for Boeing 787. Kit contents include: NDT815 reference standard. Transducer part numbers: AFS-0570-1R, AFS-0570-1L, AFS-0570-2R, AFS-0570-2L, AFS-0570-3R, AFS-0570-3L, AFS-0570-4R, AFS-0570-4L, AFS-0570-5R, AFS-0570-5L

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-5300SE-7

Description: CUSTOM EDDY CURRENT FLEXIBLE SPRING SHAFT ROTARY PROBE KIT. .125"Ø to .500"Ø. INCLUDES THE FOLLOWING 7 PROBE PART NUMBERS. AF-5300-.125SE/1T-6L, AF-5300-.156SE/1T-6L, AF-5300-.187SE/1T-6L, AF-5300-.250SE/1T-6L, AF-5300-.312SE/1T-6L, AF-5300-.375SE/1T-6L,

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-EC-BH16

Description: Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-RP09

Description: Custom Eddy Current Low Frequency Ring Probe Kit to include the following part numbers. ARP-1.40-.85-200H, ARP-1.35-.85-500H, ARP-1.25-.77-300H, ARP-1.0-.5-200H, ARP-.80/.40/200H, AF-4022, AF-4035,AF-4068, AF-4081, . Supplied with a waterproof kit box. I

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-SLD4

Description: Custom Sliding Probe kit. Includes the following part numbers. AF-6012, AF-6004, AF-4031/TF, AF-4039 Supplied with a form fitted Waterproof Kit Box. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFK-UTSB

Description: 16 PIECE STRAIGHT BEAM / DELAY LINE TRANSDUCER KIT. INCLUDES THE FOLLOWING PART NUMBERS. ARD-225, ARD-250, ARD-525, ARD-550, ARD-1025, ARD-1012, ARD-1050, ARD-1525, ARD-2012, AFC-250S, AFC-237S, AFC-550S, AFC-537S, AFC-525, AFC-1025S, AFC-1050, 1 each A

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFM-ADH-1

Description: CUSTOM ULTRASONIC TRANSDUCER HOLDER #1 FOR DUAL MICRODOT AFM SERIES TRANSDUCERS FOR 747 PART 4 57-10-09 Pg.4 (AFM-570AD-1, AFM-545AD-1)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFM-ADH-2

Description: CUSTOM ULTRASONIC TRANSDUCER HOLDER #2 FOR DUAL MICRODOT AFM SERIES TRANSDUCERS FOR 747 PART 4 57-10-09 Pg.4 (AFM-570AD-1, AFM-545AD-1)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-1012

Description: Bombardier / Challenger 300 Custom UT Thickness Reference Standard Figure 2 Part 1 Section 4 page 11. Material: 2024-T351 Clad. Standard machine milling, no Chemical mill. Step Tolerance: +/-.002". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2013AL

Description: 12 HOLE REFERENCE STANDARD 7075-T6 (3/16" x 2), 13/64", 7/32", 15/64" ,(1/4" x 2 ), 17/64",9/32", 19/64",5/16", 21/64" .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3. Includes Te

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2017-INC718

Description: BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 718 INCONEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certific

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2108

Description: DEPTH-METER-BASE-CUSTOM, BOTH PARTS PER SPEC

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2227Ti

Description: CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3007

Description: SURFACE NOTCH REFERENCE STANDARD 15-5 PH STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .20mm(.008") WIDE x .50mm(.020") DEEP +/- .05mm(.002"). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3133

Description: CUSTOM 100° COUNTERSINK BOLT HOLE STANDARD MAUNUFACTURED TO BOEING PART NUMBER 194A, 737 PART 6 53-30-00. MATERIAL: 2024-T3 CLAD ALUMINUM. HOLE SIZES: 2 HOLES 8.6mmØ. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3218AL

Description: CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3219AL

Description: CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3220ST

Description: CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/64, ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3221ST

Description: CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 52/64...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3222TI

Description: CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" + 0.000 / - 0.002" HOLE SIZES:9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3223TI

Description: CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" +0.000 / - 0.002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 5...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3269AL

Description: Custom Multi-Hole Standard manufactured to the Specifications of Airbus part number 99A53003001101. Material: 2024-T351. 8 Total Hole Sizes: 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, 11.0mm, 12.0mm, 13mm. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3286

Description: 12 HOLE REFERENCE STANDARD 7075-T6 (Hole Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1.0", 1-1/8",) .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3291AL

Description: BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3291CS

Description: BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 4340 CARBON STEEL. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3295

Description: CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083 PART 6 51-00-00 PROCEDURE 19. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002". 13 HOLE SIZES: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3307

Description: Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3320AL

Description: 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3321AL

Description: 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3396CS

Description: SURFACE NOTCH REFERENCE STANDARD 4130 or 4340 CARBON STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .51mm(.020") DEEP +/- .05mm(.002"). BLOCK SIZE: 1.0" WIDE x 3.0" LONG. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3459AL

Description: Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3459TI

Description: Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3476CS

Description: CUSTOM 6 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION..737 PART 6 51-00-00 FIG.3 PG. 8, 757 PT 6 51-00-17 PAGE 7 FIG 3 and 767 PT 6 51-00-16 PAGE 7 FIG 3. Includes Test Report and Certificate of Conformance..... Hole Sizes: .188", .250", .313", .3...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3552TI

Description: 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3554

Description: CUSTOM 4 HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: .875"(7/8"), .937" (15/16"), 1.0", 1.125". Includes Test Report and ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3555

Description: CUSTOM 5 HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: .531" (17/32"), .625" (5/8"), .750" (3/4"), .875"(7/8"), .906"(29/32...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-CRJ200/CRS

Description: SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008", .020", .040" EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL...CRJ200 PART1 51-20-06 PG.9

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-MX3502

Description: Meets AS-5282 and ASTM E1444 requirements. 12 Pre-drilled holes simulate subsurface discontinuities Verifies magnetic particle system performance when actual test parts with discontinuities are not available Forms surface indications at various magnet...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-0544

Description: Custom 5MHz 80 degree shearwave transducer. A318/A319/A320/A321 Part 4 57-29-11 page 2.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-0571-1L

Description: Custom Angle Beam Transducer(Left) for B767 Part 4 54-50-15, 5MHz 69° in steel .150" x .187" element, .375" Radius top mount microdot connector.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-0584

Description: CUSTOM BOEING 747 TRANSDUCER 35° IN STEEL WITH A 2.220" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4279. Includes Test Report and Certificate of Conformance. Reference: 747 Part 4 57-40-08

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-0591

Description: CUSTOM BOEING 747 TRANSDUCER 33° IN STEEL WITH A 2.220" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4280. Includes Test Report and Certificate of Conformance. Reference: 747 Part 4 57-40-08

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1015

Description: 10MHZ 70° IN ALUMINUM, TOP MOUNT CONNECTOR MAX LENGTH .315" BOEING 737 PART 4. 52-10-02

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1023

Description: SHEARWAVE TRANSDUCER 45 deg. in Al (SS case .433"H x .433"L x .236"W) ..connector mounted on bottom(side mount)..part 4 57-26-08 fig. 402

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1027

Description: TRANSDUCER, 5MHz .25"(6.35mm) ELEMENT WITH A 3.937"( 100mm) RADIUS. REFERENCE: AIRBUS 318/A319/A320/A321 PART 4 57-29-03 PAGE 404. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1044

Description: CUSTOM BOEING TRANSDUCER, 5MHz BACK SHOOTER WITH A 1.600" RADIUS AND A MICRODOT CONNECTOR. BOEING 767 PART 4 71-20-01 USED WITH NDT632. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1078-1L

Description: 31 DEGGREE 5MHz LEFT SCANNING POTTED ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1078-1R

Description: 31 DEGGREE 5MHz POTTED RIGHT SCANNING ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1078-2L

Description: 27 DEGGREE 5MHz POTTED LEFT SCANNING ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1078-2R

Description: 27 DEGGREE 5 MHz POTTED RIGHT SCANNING ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1095

Description: 5 MHz SHEARWAVE WITH 2.087"RADIUS USED WITH 99D54403005000 HOLDER SUB PART TRANSDUCER(F01200140)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1110-70

Description: CUSTOM 70 DEGREE 5MHz ANGLE BEAM TRANSDUCER. TOP MOUNT MICRODOT CONNECTOR. BBOEING 777 PART 4. 57-20-03

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1175

Description: 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1175T

Description: 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1202L

Description: CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, 737 Part 4 57-50-01.Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1202R

Description: CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, 737 Part 4 57-50-01. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1291

Description: 5MHZ 60° IN ALUMINUM .25" X.187" ELEMENT WITH TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: .350"W x .375"L x .750"H. BOEING 737 PART 4 57-10-13, pg.1 USED WITH NDT3166-06 AND NDT3166-07. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1292

Description: 5MHz, 60°in Aluminum .25"X.187" ELEMENT SIDE MOUNT .350"W x .375"L x .750"H. REFERENCE: BOEING 737 PART 4 57-10-09, pg.2. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1299

Description: 5MHZ 70° IN ALUMINUM .25" ELEMENT, TOP MOUNT MICRODOT CONNECTOR. CASE DIMENSIONS: .350"W x.375"L x.750"H. BOEING 737 PART 4 57-10-17, pg.2 USED WITH NDT3186 and NDT3187. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-1

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-2

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-3

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-4

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-5

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-6

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-7

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-8

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-9

Description: CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-A

Description: TRANSDUCER POSITIONER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-B

Description: TRANSDUCER POSITIONER 767Part 4 57-50-02 Pages 1-10..

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-C

Description: TRANSDUCER POSITIONER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-D

Description: TRANSDUCER POSITIONER (ALUMINUM) FOR THE TEK-5017 SERIES TRANSDUCERS. 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1300-E

Description: TRANSDUCER POSITIONER 767Part 4 57-50-02 Pages 1-10

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1354/60S

Description: 5MHZ 60° IN ALUMINUM .25" ELEMENT, SIDE MOUNT MICRODOT CONNECTOR. CASE DIMENSIONS: .350"W x.375"L x.750"H. BOEING 737 PART 4 Part 4 57-10-09. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1377-1

Description: B777 10 MHz custom L-Wave transducer with a side mount microdot connector,.900"radius 9.0° degrees incident angle. Used on NDT780-A. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1377-2

Description: B777 10 MHz custom L-Wave transducer with a side mount microdot connector, .800" radius 7°degrees incident angle. Used on NDT780-B. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1377-3

Description: B777 10 MHz custom L-Wave transducer with a side mount microdot connector, 1.05" radius 6.5° degree incident angle. Used on NDT780-C. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1377-4

Description: B777 10 MHz custom L-Wave transducer with a side mount connector, .900" radius 10° degree incident angle. Used on NDT780-D. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1377-5

Description: B777 10 MHz custom L-Wave transducer with a side mount microdot connector, .800" radius 7° degree incident angle. Used on NDT780-E. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1377-6

Description: B777 10 MHz custom L-Wave transducer 8° degree incident angle with a side mount microdot connector,1.05" radius used on NDT780-F. Includes Test Report and Certificate of Conformance. 777 PART 4 57-50-01

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-1384

Description: 5MHZ, 2 x .25" SQUARE ELEMENT PAINTBRUSH TRANSDUCER USED WITH NDT3023, 737 PART 4 32-10-03 PAGE 7 FIGURE 3. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-504

Description: CUSTOM 5MHZ TRANSDUCER FOR AFT SIDE OF THE LOWER FASTENER HOLE OF NDT3219. CASE SIZE:(.550'Lx.350'Wx.400"H) WITH 1.65" RADIUS. Includes Test Report and Certificate of Conformance. Reference: 737 part 4 57-10-19 page 1

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFS-766/767-4

Description: CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Lower Surface. Includes Test Report and Certificate of Conformance.REFERENCE: 777 PART 4 57-10-02

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFW-45/1.83R

Description: 45° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD WITH A 1.83" RADIUS USED WITH A .25"Ø DIAMETER TRANSDUCER AFC-0520(ABT-0504). Includes Certificate of Conformance...Used with Fairchild Reference Standard part number 27-95031-001.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFW-45T/22R

Description: 45° IN TITANIUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD WITH A 22mm RADIUS USED WITH A .25"Ø DIAMETER TRANSDUCER WITH A 3/8-32 THREAD. Includes Certificate of Conformance. Reference part number AMS2630C.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFW-45T/29R

Description: 45° IN TITANIUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD WITH A 29mm RADIUS USED WITH A .25"Ø DIAMETER TRANSDUCER WITH A 3/8-32 THREAD. Includes Certificate of Conformance. Reference part number AMS2630C.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFW25-40

Description: 40 Degree Lucite Wedge, MSWQC Style used for A330 part 4 57-20-52. Used with MSWQC250124591(AFC-525T-32)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AGE 14483

Description: PARTS SET,ICC EX-TENDER BOARD

In stock: 0

Sources: 4

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE 14482

Description: PARTS SET, SPDA EXTENDER CARDBOARD

In stock: 0

Sources: 5

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE 14482A

Description: PARTS SET, SPDA EXTENDER CARD BOARD

In stock: 0

Sources: 3

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195

Photos:

AGE 14483

Description: PARTS KIT

In stock: 0

Sources: 4

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE-01625-401

Description: PIN-RIGGING, RUDDER PEDAL ASSY (PART OF 170 GSE-233)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AGE-04660-401

Description: CAP FOR MID CABIN PARTITION

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AGE-05060-401

Description: STAND PART O

In stock: 0

Sources: 9

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE-05546-401

Description: NDT TASK 53-31-00-250-802-L00: 1 EA REFERENCE STANDARD - GSE 537. PLEASE SEE ATTACHED NTM “NDI1456-PART2_53-31-00_1759816237131” SEE FIGURE 603 FOR THE DETAILS

In stock: 0

Sources: 2

For Aircraft*: Embraer Legacy 600 / Legacy 650

Photos:

AGE04900-401

Description: EMBRAER 145 NDT CALIBRATION STANDARD PART

In stock: 0

Sources: 4

For Aircraft*: ERJ 145
Embraer Legacy 600 / Legacy 650

Photos:

AGE13320

Description: TROLLEY BATERY INST. AFTER ELEC. COMPART.

In stock: 2

Sources: 5

For Aircraft*: Embraer E190-E2
Embraer E195-E2
EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE13487

Description: Spline Adapter (Part of AGE13483 and AGE13488)

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AGE14482

Description: PARTS SET, SPDA EXTENDER CARD BOARD, GSE398

In stock: 0

Sources: 5

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AGE14482A

Description: PARTS SET,SPDA EXTENDER CARD BOARD

In stock: 0

Sources: 3

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195

Photos:

AGE14483

Description: PARTS KIT, EXT CARD

In stock: 0

Sources: 4

For Aircraft*: EMB 170
EMB 175
EMB 190
EMB 195
EMB 170 / EMB 190

Photos:

AH104R

Description: REGULATOR, SUPPLIER PART # GA33981

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AH120-103

Description: PARTICLE SEPARATOR EXHAUST PORT PLUG

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AHB380DV4J

Description: DUAL ZONE HOT BONDER WITH ACCESSORY PART VACUUM PUMP 230V

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AK320

Description: PART OF AIR DATA TEST SET

In stock: 0

Sources: 3

For Aircraft*: N/A

Photos:

AL 29-32

Description: BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-20-001. Also in 53-30-19 PART 6 PAGE 6 FIGURE 2. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25"

In stock: 0

Sources: 6

For Aircraft*: N/A

Photos:

AL 35-45

Description: BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM NOTCHES: .008", .020", .040" ( .005" WIDE +0.00, - .002" AND +/- .001" DEPTH), MATERIAL: 2124-T87075-T7 ALUMINUM. SIZE: 1.5"W X 3.75"L...

In stock: 0

Sources: 8

For Aircraft*: N/A

Photos:

AL-BOEING REF STD PART6 51-00-0

Description: AL REF STANDARD FOR BOEING NDT PART 6 51-00-00 PROCEDURE 16

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AL120-03-DN24

Description: [PARTS KIT - CONNECTOR

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AL35-45

Description: REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM NOTCHES: .008", .020", .040" ( .005" WIDE +0.00, - .002" AND +/- .001" DEPTH), MATERIAL: 2124-T87075-T7 ALUMINUM. SIZE: 1.5"W X 3.75"L...

In stock: 0

Sources: 8

For Aircraft*: N/A

Photos:

ALB1089

Description: Access stand, A320 cargo compartment

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AM-2563-227

Description: COM-2111 Base - Universal Transportation, CFM56 Engine Part #: AM-2563-227, Supplier: 9M323,

In stock: 0

Sources: 7

For Aircraft*: N/A

Photos:

AM-2811-4800

Description: COM-2118 Cradle - Transport, CFM56-7 Engine Part #: AM-2811-4800, Supplier: 9M323

In stock: 0

Sources: 9

For Aircraft*: N/A

Photos:

AMS 2641 TY I

Description: MAGNETIC-PARTICLE INSPECTION VEHICLE

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AN 815-3

Description: PARTS

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AN80-6-00000-1

Description: HIGH-CAPACITY AIRCRAFT SCALES PART NUMBER: AC30-60

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ANDT 3019

Description: BOEING REFERENCE STANDARD 737 PART 6 53-30-16 PAGE 5 FIGURE 1. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.

In stock: 0

Sources: 3

For Aircraft*: N/A

Photos:

ANDT3004

Description: BOEING REFERENCE STANDARD 737 PART 6 53-30-12 PAGE 7 FIGURE

In stock: 0

Sources: 3

For Aircraft*: N/A

Photos:

ANDT3006

Description: BOEING REFERENCE STANDARD 737 Part 6 53-30-14 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 3

For Aircraft*: N/A

Photos:

ANDT3019

Description: BOEING REFERENCE STANDARD 737 Part 6 53-30-16 Page 5 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 3

For Aircraft*: N/A

Photos:

ANDT388

Description: BOEING 737 REFERENCE STANDARD PART 6 53-10-48, ..PAGE 11 FIGURE 4. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ANDT390A

Description: BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 10 Figure 4. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

ANDT390B

Description: BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 11 Figure 5. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AP-579527

Description: GPU PART

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AP-BEE250-1

Description: PARTITION REMOVAL TOOL

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APA97632M1-4-4-4

Description: SMARTPROBE PRESSURE ADAPTER PART NUMBER:APA97632M1-4-4-4

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB

Description: AVIATION PARTNERS BOEING 767 PART6 57-20-03: PG6 FIG2

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT001

Description: AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 6 Frigure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT002

Description: Aviation Partners Boeing 767 Part6 57-20-02: PG9 FIG5

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT003

Description: Aviation Partners Boeing 767 Part6 57-20-02: PG9 FIG5

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT004

Description: Aviation Partners Boeing 767 Part6 57-20-01: PG6 FIG2

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT005

Description: Aviation Partners Boeing 767 Part6 57-20-02: PG13 FIG7

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT006

Description: AVIATION PARTNERS BOEING REFERENCE STANDARD??767 5

In stock: 0

Sources: 2

For Aircraft*: N/A

Photos:

APB-NDT007

Description: BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT008

Description: BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 1-2 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT009

Description: BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 5-6 Figure 6.Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certif

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT010

Description: BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 8-9 Figure 8. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

APB-NDT011A

Description: AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8-9 Figure 3. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.

<< Previous Page

Page 11

Next Page >>

Contact info

Link Footer

services

Request Items (0)

Go to Request