Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
0356720170 | SCREW JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
535700036 | SCREW JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130P11 | SCREW JACK | 4 | |
CHA1238-002C | SCREW JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ0010-503 | SCREW JACK | 1 | |
HU41649 | SCREW JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
856A1130 | TOOL SET - JACK SCREW | 4 | |
(CALIB) 98L55109007000 | WRENCH-GROOVE NUT, THS SCREW JACK (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) C27050-32 | Handling EQPT - R/I Stab Jackscrew (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) F80014-16 | HOIST ADAPTER STABILIZER JACKSCREW (CALIBRATION) | 1 | |
(CALIB) F80014-2 | BAR STABILIZER JACK SCREW (CALIBRATION) | 1 | |
(CALIB) PWC32396 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB)C27050-82 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, STABILIZER JACKSCREW (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0U142112 | ASS SCREW JACK KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10-24-36 | JACK - TRIPOD, 10 TON, 24 IN. CLOSED HEIGHT, 36 IN. LIFT, 4 IN. SCREW EXTENSION, 64 IN. EXTENDED HEIGHT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10-24-36(2) | JACK - TRIPOD, 10 TON, 24 IN. CLOSED HEIGHT, 36 IN. LIFT, 4 IN. SCREW EXTENSION, 64 IN. EXTENDED HEIGHT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1008-50 | JACK - AXLE, NLG - 10 TON CAPACITY - 8" MINIMUM HT., 13" LIFT, 4" SCREW EXTENSION, 25 TOTAL HT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1036G01 | TOOL SET, JACKSCREWS (TOOL SET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-54371-1 | KIT FLAP JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3389 | JACK SCREWS - DIASSEMBLE-STG 5-10 HPC STTR INR RINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3389G01 | JACK SCREWS, DISASSEMBLE - STAGE 5-10 HPC STTR INR RINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
15-54-40 | JACK - TRIPOD, 15 TON, 54 IN. CLOSED HEIGHT, 40 IN. LIFT, 12 IN. SCREW EXTENSION, 106 EXTENDED HEIGHT. | 3 | |
190E2G0004 | JACKSCREW ASSY-HORIZONTAL STABILIZER | 2 | |
1C6804 | TOOL SET,JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6804G01 | TOOL SET,JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6804G04 | JACKSCREWS, FLANGE DISASSEMBLE TOOL SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8039P02 | JACK SCREW HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8039P03 | JACK SCREW HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8039P04 | JACK SCREW HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9013G01 | JACKSCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9150 | TOOL SET, JACK SCREWS-ENGINE BEARINGS & SEALS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9150G02 | TOOL SET, JACK SCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1SF2476-27-43KN | HORIZONTAL STAB. JACKSCREW PIN | 1 | |
244689 | CAPSCREW, JACK OFF FRONT | 3 | |
244689-2 | CAPSCREW, JACK OFF FRONT SUPPORT RING FROM FAN DISC | 5 | |
298487 | Screw, Jack Assembly | 1 | |
2AJ65B80552 | ASSY JIG SHAFT - DIFFERENTIAL STABILIZER JACKSCREW | 1 | |
2C6164 | TOOL SET - JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6164G01 | SET JACK SCREW | 6 | |
2C6164P04. | JACKSCREW (6164G01'İN PARÇASI) | 1 | |
2MIT65B81117-1 | B747 TE FLAP JACK SCREW SUPPORT EQUIPMNET | 9 | |
32396 | JACKSCREWS P&WC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330A91-0181-01 | JACK SCREW HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3400844-3 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3403149-1 | FLAP JACKSCREW BALL NUT | 2 | |
365A91-2141-01 | JACKING: BALL ASSY, SCREW ON AIRFRAME FRONT [AS365 - EC155] | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3C3238P07 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
3G6005G00431 | JACKSCREWS KIT (MAIN GEARBOX ASSY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G6305G01331 | JACKSCREWS KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3MIT65B80713 | MIS,TOOL AIR MOTOR-STAB,JACKSCREW ADPT | 3 | |
3SF5384-1 | FLAP JACKSCREW GIMBAL OILER | 1 | |
4621 | HOIST, JACKSCREW - STABILIZER, 500 LB RATING (CM CYCLONE HAND CHAIN HOIST) (MINIMUM 15 FT CHAIN REQD IN LIEU OF STANDAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7011 | BARREL, Stab. Jack Screw Pin Tool | 8 | |
460007060 | SCREWJACK ASSEMBLY | 2 | |
4600067060 | SCREW JACK ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
50-60-44 | JACK - TRIPOD - WING - 50 TON CAPACITY - 60" MINIMUM HT., 44" HYDRAULIC LIFT, 16" SCREW EXTENSION, 120" TOTAL HT. | 4 | |
532740157-1 | ADAPTER JACKSCREW | 1 | |
532740157-2 | ADAPTER JACKSCREW | 1 | |
53D22004 | JACK - AXLE, NLG - 10 TON CAPACITY - 8" MINIMUM HT., 13" LIFT, 4" SCREW EXTENSION, 25 TOTAL HT MODEL NUMBER 1008-50. | 2 | |
55771S0000 | BACKLASH CHECKING TOOL - SLAT SCREWJACKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
558-1-05903-6 | SCREW-JACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
65P10 | JACK - AXLE, 65 TON CAPACITY, 10.19 CLOSED HEIGHT, 11.0LIFT, 4.75 SCREW EXTENSION, 25.94 INCH EXTENDED HEIGHT | 5 | |
6F6000F00132 | JACKSCREW KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6F6000G00132 | JACK SCREW KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
714ALEGEXT | JACK - TRIPOD - AFT BODY - 12 TON CAPACITY - 96-150 INCHES WITH 36 INCH LEG EXTENSION KIT - 44 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION | 1 | |
718A | JACK - TRIPOD - FORWARD FUSELAGE - 20 TON CAPACITY - HEIGHT 54-104 INCHES - 40 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION - HEIGHT 72-122 INCHES WITH 18 INCH LEG EXTENSION KIT - HEIGHT 90-140 INCHES WITH 36 INCH LEG EXTENSION KIT | 3 | |
718B | JACK - TRIPOD - FORWARD FUSELAGE - 20 TON CAPACITY - HEIGHT 54-104 INCHES - 40 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION - HEIGHT 72-122 INCHES WITH 18 INCH LEG EXTENSION KIT - HEIGHT 90-140 INCHES WITH 36 INCH LEG EXTENSION KIT | 2 | |
718B/71800B | JACK - TRIPOD - FORWARD FUSELAGE - 20 TON CAPACITY - HEIGHT 54-104 INCHES - 40 INCH HYDRAULIC LIFT - 10 INCH SCREW EXTENSION - HEIGHT 72-122 INCHES WITH 18 INCH LEG EXTENSION KIT - HEIGHT 90-140 INCHES WITH 36 INCH LEG EXTENSION KIT | 1 | |
7825222 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
795D1100 | JACK - TRIPOD - AFT FUSELAGE - 15 TON CAPACITY - 44" MINIMUM HT., 54" HYDRAULIC LIFT, 13" SCREW EXTENSION, 111" TOTAL HT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7MIT65B03670 | 747SP HORIZONTAL STABILIZER JACKSCREW SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A-1130-G01 | Tool Set, 53 Jack Screws | 7 | |
856A-1130-G02 | Tool Set, 4 Jack Screws | 6 | |
856A-1130-G03 | Tool Set, 21 Jack Screws | 1 | |
856A-1130-G07 | Tool Set, 31 Jack Screws | 6 | |
856A-1130-G08 | Tool Set, 28 Jack Screws | 6 | |
856A-1130-G09 | Tool Set, 42 Jack Screws | 10 | |
856A-1130-P05 | Jack Screw | 2 | |
856A-1130-P08 | Jack Screw | 8 | |
856A-1130-P10 | Jack Screw | 2 | |
856A-1130-P11 | Jack Screw | 4 | |
856A1130 | TOOL SET - JACK SCREWS | 4 | |
856A1130 G10 | TOOL SET-JACKSCREWS | 25 | |
856A1130 GO9 | TOOL SET- JACK SCREW | 10 | |
856A1130 REV M | TOOL SET-JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130/ALT: 856A1130G01 | TOOL SET-JACK SCREW | 1 | |
856A1130G01 | TOOL SET - JACKSCREWS (TOOL SET) | 7 | |
856A1130G010 | TOOL SET - JACK SCREW | 2 | |
856A1130G011 | TOOL SET - JACK SCREW | 1 | |
856A1130G02 | TOOL SET - JACKSCREW | 6 | |
856A1130G03 | TOOL SET JACKSCREW | 1 | |
856A1130G04 | TOOL SET - JACK SCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130G05 | TOOL SET JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130G06 | TOOL SET - JACK SCREWS | 7 | |
856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 6 | |
856A1130G08 | TOOL SET - JACK SCREWS | 6 | |
856A1130G08 | TOOL SET JACKSCREW | 6 | |
856A1130G09 | Tool set-jack screw | 10 | |
856A1130G09 | TOOL SET JACKSCREW | 10 | |
856A1130G10 | TOOL SET â JACK SCREW | 25 | |
856A1130G12 | Tool Set Jack Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130G6 | TOOL SET - JACK SCREW | 1 | |
856A1130GO9 | TOOL SET- JACK SCREW | 10 | |
856A1130P04 | JACKSCREW .3125-24UNF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130P05 | JACKSCREW .250 DIAMETER | 2 | |
856A1130P08 | JACKSCREW | 8 | |
856A1130P09 | SCREW, JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130P10 | JACKSCREW 312-24UNF | 2 | |
856A1130P11 | ADAPTER JACKSCREW | 4 | |
856A1130P12 | JACK SCREW .190-32UNF | 10 | |
856A1130P13 | JACK SCREW | 1 | |
856A1130P17 | JACK SCREW .250-28UNF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130P19 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1130P8 | JACK SCREW | 1 | |
856A1130 | TOOL SET - JACK SCREW | 4 | |
856A1196G02 | TOOL SET JACKSCREWS | 4 | |
856A1839G01 | FIXTURE, DISASSY-HPTR/HPCR (JACKSCREW) | 6 | |
856A2601G01 | Kit Jackscrew | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3576G02 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 14 | |
856AA1130G10 | JACK SCREWS | 1 | |
856AII30 | TOOL SET-JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856AII30 GO9 | TOOL SET- JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856AII30G0I | TOOL SET- JACK SCREW;SEE MI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856S1130P11 | ENGINE REPAIR JACKSCREW | 1 | |
8842 | JACK - AXLE, 45 TON CAPACITY, 7.0" CLOSED HEIGHT, 12.03" LIFT, 2.84" SCREW EXTENSION, 21.88" INCH EXTENDED HEIGHT, 7.0" | 4 | |
8C2741 | JACK SCREWS, SEPERATION SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8G6000G00231 | JACKSCREWS KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9429M50 | SET-JACKSCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9429M50G02 | SET - JACK SCREW | 1 | |
9429M50G04 | JACK SCREW SET | 2 | |
9441M55 | JACKSCREW-TRANSFER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9441M55 REV B | JACKSCREW-TRANSFER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9441M56 | JACKSCREW-TRANSFER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9441M56 REV C | JACKSCREW-TRANSFER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M48P01 | TOOL SET - JACKSCREW | 5 | |
9480M58G02 | JACKSCREW | 1 | |
956A1243 | TOOL SET - JACK SCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1609 | TOOL SET - JACK SCREW | 1 | |
956A1609G01 | JACK SCREW | 5 | |
956A3243 | TOOL SET - JACK SCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3506 | SET - GUIDE PINS / JACK SCREWS - PMA INSTALL/REMOVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3506G01 | SET, GUIDE PINS / JACK SCREWS- PMA | 7 | |
956A6002 | TOOL KIT - JACK SCREWS - FAN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6880P03 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A12001029000 | LUBE ADP SCREW JACK TOOL RL S13B2 | 3 | |
98A27104018000 | CLAMP-AILERON TRIM SCREW JACK | 2 | |
98A27203250003 | SCREW-JACK ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27203501001 | SCREW-JACK ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27501501000 | SLEEVE-LOCKING,FLAP SCREW JACK NO.1 HEAD ATTACHMEN | 4 | |
98A27504011000 | EXTRACTOR - GIMBAL SPIGOT - SCREWJACK TO FLAP CARRIAGE | 6 | |
98A27508022000 | MEASURING DEVICE-OVERTRAVEL FLAP, SCREW JACKS 1 THRU 4 | 3 | |
98A27508051000 | SETTING DEVICE SET-SUPPORTING SPRING,FLAP SCREW JACK 1 | 1 | |
98A27803000000 | WRENCH-SLAT SCREWJACK UNLOCKING | 4 | |
98A32301010000 | BACKLASH CHECKING TOOL - FLAP SCREWJACK 2 | 9 | |
98A32301011000 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1,3 AND 4 | 5 | |
98A54003023100 | JACKSCREW | 1 | |
98A54003023101 | JACK SCREW | 1 | |
98A54003023102 | JACK SCREW | 1 | |
98A54003036000 | VIS DE VERIN JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A54003036100 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D27203000043 | SCREW JACK ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F55109012000 | WRENCH - GROOVE NUT, THS SCREW JACK | 4 | |
98L55109007000 | WRENCH-GROOVE NUT, THS SCREW JACK | 1 | |
98S 070 0 0005 000 | JACK PNT PLUG SCREW DRIVER | 14 | |
98S07000000500 | JACK POINT PLUG SCREW DRIVER (ATR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98S07000005000 | JACK PNT PLUG SCREW DRIVER - SCREW DRIVER JACKING POINT | 14 | |
98S07000005000-REVB0 | JACK PNT PLUG SCREW DRIVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2254G01 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2351 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2351G01 | JACKSCREW - EXTRACTION SCREW SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2351G02 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A0054 | Screwdriver Jacking Point Plug | 1 | |
A0083 | Clamp Screw Jack Large Cargo Door | 1 | |
AB72001-N3V | TOOL SET - JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AID-00704 | JACKING SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AJ65B80552 | ASSEMBLY JIG - DIFFERENTIAL ASSEMBLY, STABILIZER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AN509-416R15 | WING JACK SCREW | 2 | |
B27001-1 | REMOVAL AND INSTALLATION EQUIPMENT HORIZONTAL STABILISER JACKSCREW | 8 | |
B27001-79 | REMOVAL AND INSTALLATION EQUIPMENT HORIZONTAL STABILISER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27011 | INSTL/REM EQUIPMENT-HORIZ. STAB,JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27011 REV E | INTL/REM EQUIPMENT - HORIZ. STAB. JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27011-28 | HORIZ STAB JACKSCREW TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27011-4 | HORIZ. STAB. JACKSCREW INST/REM | 4 | |
B27011-62 | FRAME ASSEMBLY - HORIZ. STAB. JACKSCREW INST/REM | 3 | |
B27011-69 | R&I Equip Horiz Stab Jackscrew | 3 | |
B27011-71 | TRUNNION ASSEMBLY - HORIZ. STAB. JACKSCREW INST/REM | 4 | |
B27011-77 | HORIZ. STAB. JACKSCREW INST/REM | 4 | |
B27011-79 | TOOL FOR HORIZ STAB JACKSCREW | 18 | |
B27034 | CHECKING EQPT-JACKSCREW BACKLASH,HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27034 REV NC | CHKNG EQUP - JACK SCREW: BACK LASH HZTL STBLZR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27034-1 | CHECKING EQPT-JACKSCREW | 11 | |
B27034-1-M | CHECKING EQPT-JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27034-6 | LOAD ASSEMBLY-JACKSCREW BACKLASH,HORIZ .STABILIZER INCUDED IN B27034-1 | 6 | |
B55002-11 | Jack Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BS4168 | SCREW M5X12 JACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C12004-6 | SPRING LUBE JACK JACK SCREW | 16 | |
C12005-5 | OIL GUN FLAP SCREWJACK RESERVOIR | 14 | |
C12005-6 | DISP LUBE JACKSCREW | 7 | |
C136408-2 | SCREWJACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C20750-82 | EQUIP.HANDLING,STABILIZER SCREW JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27011 | INSTL/REM EQUIPMENT-HORIZ. STAB,JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27050 | HANDLING EQUIPMENT REMjINSTL STAB JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27050-1 | EQUIP JACKSCREW H/S | 1 | |
C27050-125 | REMOVER/INSTALLER JACKSCREW | 6 | |
C27050-32 | Handling Equ Rem \ Inst Stab Jackscrew | 7 | |
C27050-36 | REMOVER/INSTALLER JACKSCREW | 1 | |
C27050-82 | HANDLING EQUIPMENT - REM/INSTL, STAB JACKSCREW | 16 | |
C27050-82 | JACKSCREW R/I EQ | 16 | |
C27065-1 | HORIZ STAB JACKSCREW BACKLASH | 4 | |
C27065-20 | HST JACKSCREW BACKLASH CHECK EQUIP | 9 | |
C27090-1 | TORQUE SOCKET - UPPER STOP, STABILIZER TRIM JACK SCREW (SPL-13949) | 9 | |
C27090-1 | TORQUE SOCKET - UPPER STOP, STABILIZER TRIM JACK SCREW | 9 | |
C270901 | TORQUE SOCKET - UPPER STOP, STABILIZER TRIM JACK SCREW | 9 | |
C28008-1 | CHECK EQUIPMENT - JACKSCREW BACKLASH HORIZONTAL STABILIZER | 11 | |
CE4-1219 | PULLER JACKSCREW | 1 | |
CE4-1220 | PULLER JACKSCREW | 1 | |
CE4-1249 | PULLER JACKSCREW | 1 | |
CH713-125 | STEADY JACK SCREW BEARING | 1 | |
CH723-435 | PIN LOCKING TRIMMABLE HORIZONT STABI SCREW JACK M CON | 1 | |
CHA141377 | SCREW/JACKHEAD END FLOAT CHECKING ADAPTER | 4 | |
CHA141478 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1 THRU 6 | 3 | |
CPWA-30226 | Jack Screws | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D01051 | JACK - TRIPOD, FORWARD BODY, 11 TON CAPACITY, 57.1 INCH CLOSED HEIGHT, 40.2 INCH HYDRAULIC LIFT, 10.0 INCH SCREW EXTENSION, 107.3 INCH EXTENDED HEIGHT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DRT68165 | JACK-SCREW, ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DRT68834 | SCREW JACK ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ0010-1 | Screwjack-slat drum positioning ,outbd | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ0010-503 | OUTBD SLAT DRIVE MECH JACK SCREW | 1 | |
DZZ0018 | SCREWJACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ0018-1 | INBD SLAT DRIVE MECH JACK SCREW | 1 | |
DZZ7021-1 | HORZ STAB JACKSCREW | 4 | |
ELA12986-1 | DIP EXTRACTOR JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7/252 JACKSCREW | JACKSCREW ADAPTER 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70057 | SUPPORT ASSY -0 STABILIZER JACK SCREW USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70057-500 | SUPPORT ASSEMBLY-STABILIZER JACK SCREW | 1 | |
F70087 | SPANNER (HORZ STAB JACKSCREW) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72703-500 | STAB. SUPPORT JACKSCREW | 4 | |
F72908 | HOIST MOUNT ASSY -0 STABILIZER JACKSCREW USED AS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72908-1 | STABILIZER JACK SCREW HOIST | 3 | |
F72908-3 | HOIST MOUNT ASS'Y STAB.JACKSCREW | 1 | |
F72924-1 | Holder -Stabilizer Trim Jackscrew Ballnut And Screw Assembly | 7 | |
F72937-1 | GAGE JACKSCREW XMISS | 3 | |
F72937-2 | GAGE JACKSCREW XMISS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80014 | HANDING EQUIPMENT-STABILIZER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80014-1 | STAB JACKSCREW HOIST ADAPTER | 1 | |
F80014-16 | JACK SCREW STAB EQUIPMENT | 14 | |
F80014-2 | STAB JACKSCREW - BAR ASSEMBLY | 13 | |
F80014-2-M | STABILIZER JACKSCREW BAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FAR25A21 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FAS-B27011-85 | Horizontal Jackscrew Support Equip | 1 | |
FJC01-35-24000 | SCREW JACK-TRESTLE,REARFUSELAGE AND AUTER WING (SUPPORT TRESTLE (WING AND TAIL) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB3411012 | JACKING SCREW − OIL PUMP (SERIES 400) | 1 | |
HC130-H0064-000 | GAGS SCREW JACK | 3 | |
HC130H0072-000 | Extractor - pin flap screw jack trunnion | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HC130H0108-000 | Clamp - locking flap screw jack | 3 | |
HC130H0179-000 | Fixture - back lash checking, flap ball screw jack | 3 | |
HU27579 | SPANNER - T/R ARREST SCREW JACK, RB211 | 1 | |
IAE1P17043 | PULLER, JACKSCREW LHT Dwg No.(537230044) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IPK1760-JSK | JACK SCREW KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J1383P04 | JACKSCREW - EXTRACTION SCREW SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32014-36 | Jack Screw Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32014-92 | JACK SCREW | 1 | |
J32082-4 | JACK SCREW ASSEMBLY | 1 | |
J55004-3 | JACK SCREW ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J55004-77 | Jack Screw Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K-3343 | TRONAIR JACK REPLACEMENT SCREW KIT | 3 | |
K55001-58 | JACK SCREW ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K55001-6 | JACK SCREW ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L-37764 | PULLER JACKSCREW HPC | 1 | |
L-37765 | PULLER JACKSCREW HPC | 1 | |
L27001-1 | Check Equipment - Jackscrew Horz Stabilizer | 7 | |
LLA537A204 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 1, 3 AND 4 | 3 | |
LLA547A108 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 2 | 2 | |
LST50680 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LST64622 | Jackscrew - complete | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65C37785-1-81 | JACK SCREW ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS24694-S102 | WING JACK SCREW | 1 | |
MTK | PUSHER JACKSCREW LPC | 1 | |
NPN | PUSHER JACKSCREW LPC | 1 | |
PS660S | HYDRAULIC JACK 60 TONNE, 150MM SCREWED RAM | 1 | |
PWA 101848 | PULLER, JACKSCREW (6 NECESSARY) | 1 | |
PWA 108554 | PULLER, JACKSCREW FAN, SPINNER | 2 | |
PWA 108555 | PULLER,JACKSCREW-FAN SHAFT | 1 | |
PWA 115019 | PMA ROTOR JACKSCREW PULLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 211790 | PULLER, JACKSCREW | 3 | |
PWA 81556 | RING, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 85069 | PULLER, JACKSCREW | 1 | |
PWA 85258A | PULLER JACKSCREW LPT | 1 | |
PWA 85298 | PULLER, JACKSCREW | 1 | |
PWA 85307 | PULLER, JACKSCREW | 8 | |
PWA 85632 | PULLER, JACKSCREW | 1 | |
PWA 85688 | PULLER, JACKSCREW | 8 | |
PWA 86489 | PULLER, JACKSCREW | 1 | |
PWA 86551 | PULLER, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 86630 | JACKSCREW PULLER (2 ARE NECESSARY) − | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA101035 | PULLER-JACKSCREW ANGLE GEARBOX | 3 | |
PWA101042 | PULLER JACKSCREW | 2 | |
PWA101179 | PULLER JACKSCREW LPT | 1 | |
PWA101833 | PUSHER JACKSCREW LPT | 1 | |
PWA102301 | PULLER JACK SCREW | 1 | |
PWA102346 | PULLER JACK SCREW | 1 | |
PWA102388 | PULLER JACK SCREW | 1 | |
PWA102396-1 | PULLER JACKSCREW HPC 3 PCS SET | 1 | |
PWA102460 | PULLER JACKSCREW HPC 3 PCS SET | 1 | |
PWA108554 | PULLER JACK SCREW | 2 | |
PWA108554C | PULLER JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA108555 | PULLER, JACKSCREW | 1 | |
PWA111015 | PULLER JACKSCREW CONE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA111606 | PULLER, JACKSCREW | 2 | |
PWA111679 | PULLER, JACKSCREW-FAN SHAFT PLUG | 3 | |
PWA211778 | PULLER, JACKSCREW | 2 | |
PWA211790 | PULLER, JACKSCREW | 3 | |
PWA27600 | PULLER - 1ST STAGE SCREW JACK_TO REM SPLITTER FAIRING ASSY FR ENG ASSY_229 X 152 MM / 0.75 KG_[PWA27600] | 4 | |
PWA45211 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA45543 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA75735 | PUSHER JACKSCREW LPT | 1 | |
PWA75751 | PUSHER JACKSCREW LPT | 1 | |
PWA75946 | PULLER JACKSCREW | 1 | |
PWA75947 | PULLER JACKSCREW | 1 | |
PWA78173 | PULLER JACKSCREW | 1 | |
PWA78176 | PULLER JACKSCREW | 1 | |
PWA80212 | PULLER JACKSCREW ANGLE GEARBOX RADIAL DRIVE NUT WASHER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80214 | PULLER JACKSCREW ANGLE GEARBOX RADIAL DRIVE OIL DUCT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80238 | PULLER, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80239 | PULLER, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80240 | PULLER, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA81797 | PULLER, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85033 | PULLER JACKSCREW HPC ROTOR ASSY | 1 | |
PWA85034 | PULLER JACKSCREW HPC ROTOR ASSY | 1 | |
PWA85035 | PULLER JACKSCREW HPC ROTOR ASSY | 5 | |
PWA85036 | PULLER JACKSCREW HPC ROTOR ASSY | 1 | |
PWA85078 | PULLER JACKSCREW LPT | 1 | |
PWA85079 | PUSHER JACKSCREW LPT | 1 | |
PWA85081 | PULLER JACKSCREW LPT | 1 | |
PWA85082 | PULLER JACKSCREW LPT | 1 | |
PWA85124 | PULLER JACKSCREW LPT | 1 | |
PWA85195 | PULLER JACKSCREW | 1 | |
PWA85262 | PULLER JACKSCREW | 1 | |
PWA85307 | PULLER-JACKSCREW ENG ASSY N.4 BEARING CO | 8 | |
PWA85574 | PULLER JACKSCREW ENG ASSY | 1 | |
PWA85601 | PULLER JACKSCREW SUPPORT HPC REAR | 1 | |
PWA85676 | PULLER JACKSCREW | 1 | |
PWA85688 | PULLER-JACKSCREW,VARIBLE STATOR VANE ACTR | 8 | |
PWA856881 | PULLER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85798 | PULLER JACKSCREW | 1 | |
PWA85801 | PULLER JACKSCREW | 1 | |
PWA85926 | PULLER JACKSCREW SUPPORT HPC REAR | 1 | |
PWA85931 | JACKSCREW PULLER | 2 | |
PWA85936 | PULLER JACKSCREW SUPPORT HPC REAR | 1 | |
PWA86086 | PULLER-JACKSCREW GBX ASSY PMA | 1 | |
PWA86484 | PULLER JACKSCREW | 1 | |
PWA86540 | PULLER JACK SCREW HPT | 1 | |
PWA86543 | PULLER JACKSCREW | 1 | |
PWA86551 | PULLER JACKSCREW MAIN GEARBOX PMA ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA86630 | PULLER - JACKSCREW, LUBRICATION AND SCAVENGE OIL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA87208 | PULLER, JACKSCREW | 1 | |
PWA87208A | PULLER, JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA87225 | PULLER, JACKSCREW - MAIN GEARBOX, PMA SEAL RETAINER | 2 | |
PWA87227 | PULLER - JACKSCREW, PMA BEARING SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA88231 | PULLER - JACKSCREW, ENGINE ASSEMBLY, OIL TANK REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA88774 | PULLER - JACKSCREW, LUBRICATION AND SCAVENGE OIL PUMP | 1 | |
PWC 32396 | JACKING SCREW | 7 | |
PWC 32396-400 | JACKINGSCREW,GG CASE | 4 | |
PWC30226 | JACKING SCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC32346-400 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC32396 | SCREWS, JACKING | 7 | |
PWC32396-1 | JACKING SCREWS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC32396-100 | JACKSCREWS 3 PER SET | 7 | |
PWC32396-200 | JACK SCREW (SET OF 3) | 8 | |
PWC32396-200N | JACKSCREW 2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC32396-300 | Jacking screw - Pratt & Whitney Canada | 3 | |
PWC32396-400 | JACKSCREW, GAS GENERATOR CASE FROM DIFFUSER CASE | 4 | |
PWC32396-500 | JACKSCREW 0.50 | 2 | |
PWC32396-600 | JACKING SCREW | 2 | |
PWC32396-700 | Jackscrew | 1 | |
PWC37207 | JACKING SCREW | 1 | |
PWC38161 | JACK SCREW | 4 | |
PWC38231 | LOCKING RING,ADAPTER,JACK SCREWS | 3 | |
PWC38396 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC42034 | Jackscrew - Pratt & Whitney Canada | 1 | |
PWC57220 | SCREW, JACK-OIL PUMP | 6 | |
PWC58513 | Jacking screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800 | SCREW JACKING SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-075 | Jacking screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-100 | Jacking screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-150 | SCREW JACKING N°3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-200 | SCREW JACKING N°4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-250 | SCREW JACKING N°5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-300 | SCREW JACKING N°6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-350 | SCREW JACKING N°7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-400 | SCREW JACKING N°8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-50 | SCREW JACKING N°10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-75 | SCREW JACKING N°9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89800-85 | SCREW JACKING N°1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R1015 | SLAT SCREW JACK RIG INCL INSTRUMENT N01455 | 1 | |
R1016 | FLAP SCREW JACK RIG INCL INSTRUMENT N01520 | 1 | |
RB T102064 | SCREW SET, JACKING, TRANSMISSION | 2 | |
RB T100929 | JACKING SCREW SET | 2 | |
RB T100929-3 | Jack Screw | 1 | |
RB T101308 | JACKSCREW SET | 2 | |
RB T101308-3 | Jack Screw | 1 | |
RB T101338 | JACK SCREW SET | 1 | |
RB T102064 | JACK SCREW (TEE HANDLE) | 2 | |
RB T103222-101 | Jack Screw Set (Set of 3) | 1 | |
RB6889889-4 | Jack Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RB900G8920125-1 | Jack Screws (2 Pieces) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBT101308 | SCREW SET, JACK (3PCS) | 2 | |
RBT101338 | JACKSCREW SET | 1 | |
RBT102064 | JACK SCREW (TEE HANDLE) | 2 | |
RBW6000G00231-8G | JACKSCREWS KIT | 1 | |
RBW6000G00531-8G | JACKSCREWS (#10-32) | 1 | |
RBW6005G00431-3G | Jack Screw Set | 1 | |
RBW6005G00531-3G | Jack Screw | 1 | |
RBW6005G00631-3G | Jack Screw | 1 | |
RH1029 | JACK - AXLE, HAND CARRY, 11 TON CAPACITY, 5.7 CLOSED HEIGHT, 10.4 LIFT, 1.6 SCREW EXTENSION, 17.7 INCH EXTENDED HEIGHT, (HYDRO-GERAETEBAU GMBH & CO. K.G.) | 1 | |
SE27-1001 | HOLDER ASSY -0 STABILIZER TRIM JACKSCREW USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SE27-1011 | HOLDER ASSY -0 STABILIZER TRIM JACKSCREW USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SE27-4503 | HOLDER JACKSCREW H/S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-13949 | TORQUE SOCKET - UPPER STOP, STABILIZER TRIM JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1728 | EQUIPMENT - HANDLING, STABILIZER JACKSCREW (DOME PRESSURE BULKHEAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1752 | EQUIPMENT - CHECK, JACKSCREW BACKLASH, HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-2262 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-6422 | SET OF 3EA JACKSCREWS - 1/4X28 UNF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T100929 | SCREW SET, JACKING, TRANSMISSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T100929-3 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T101308 | SCREW SET, JACK (3PCS) | 3 | |
T101308-3 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T101308/T102064 | JACK SCREW SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T101308 | JACK SCREW | 3 | |
T101338 | JACKSCREW SET | 1 | |
T101338-3 | JACKSCREW | 1 | |
T101440 | TRANSMISSION LEVER JACK SCREW | 1 | |
T102064 | SCREW SET, JACKING, TRANSMISSION | 1 | |
T103222 | JACK SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103222-101 | JACK SCREW SET SET OF 3 | 1 | |
T103222-101 | JACKSCREWS | 1 | |
T103222-1Q1 | JACK SCREW SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T14564 | JACK-SCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T240486 | JACKSCREW DRIVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE27T-41001-8 | STAB TRIM JACK SCREW SCALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TR8770 | CARGO STRAPS-SCREWJACK R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UT1271-1 | SCREW JACK BLOCK | 2 | |
WC32396-400 | JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
f 80014-1 | stab jack screw handling equiptment | 1 | |
f 80014-2 | stab jack screw handling equiiptment | 13 | |
lC6804 | TOOL SET, JACK SCREW-DISASSEMBLE FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27803000000 | WRENCH,FOR SLAT SCREWJACK UNLOCKING | 4 | |
CHA141478 | BACKLASH CHECKING TOOL,FLAP SCREWJACKS 1 | 3 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.