| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AT153F-18 | POWER SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1C8305 | FIXTURE, INSTALL/REMOVE-POWER TURBINE, AFT SHAFT S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23005022 | INNER POWER TURBINE SHAFT | 2 | |
| 23052528 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 23052530 | ADAPTER, POWER-UNIT ACCESSORY-DRIVE STARTER-SHAFT-DRIVE | 2 | |
| 23053665 | Support – Power Turbine Shaft, Power Turbine Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23055726 | Dimple Tool – Cup Washer Lock, Power Turbine Rear Shaft | 1 | |
| 23060646 | Protector – Power Turbine Rear Short Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23068605 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 0292120880 | SHAFT ASSY,POWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0292127990 | SHAFT ASSY,POWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0292128000 | SHAFT ASSY,POWER,EQUIPPED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0292128020 | SHAFT ASSY,POWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0319738530 | PIPE,DRAIN,POWER SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0356550010 | SHAFT,POWER TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C5235G01 | Power Lever Shaft Rigging Pin | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A93510000 | SHAFT POWER PLANT SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5120-01-338-1428 | PULLER, MECHANICAL-POWER OUTPUT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 51C1072-1 | DRUM SHAFT,FOR POWERED FISHPOLE HOIST,MO | 1 | |
| 6795614 | PULLER AND PUSHER IDLE GEAR SUPPORT SHAFT POWER AND ACCESORY GEARBOX | 2 | |
| 6795984 | POWER TURBINE HOLDER SHAFT | 2 | |
| 6795985 | WRENCH POWER TURBINE SHAFT BALL BEARING RETAINING NUT | 2 | |
| 6795990 | DUMMY BEARING POWER TURBINE SHAFT FRONT | 2 | |
| 6795993 | CAP JOINING AND SEPARATING POWER TURBINE WHEEL AND SHAFT | 2 | |
| 6798927 | CRIMPER-LOCKNUT, COMPRESSOR IMPELLER ASSEMBLY AND TURBINE POWER SHAFT | 2 | |
| 6889894 | HOLDER – SPLINED, POWER TURBINE SHAFT | 2 | |
| 6893399 | PLATE, BEARING PULLER, POWER TAKEOFF SHAFT REAR | 2 | |
| 8812 478 000/PHP | SUPPORT FOR POWER SHAFT | 1 | |
| 8812-478-000 | SUPPORT FOR POWER SHAFT | 1 | |
| 8812478000 | SUPPORT for POWER SHAFT | 1 | |
| 8814283000 | BLANK,POWER SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9560177000 | POWER SHAFT FACE SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-4/7L | STAINLESS STEEL SHAFT SURFACE PENCIL PROBE .125" DIA TUBING 4 .0" LONG 7 PIN LEMO CONNECTOR (POWER LINK) 50-500KHZ Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-4/7L/500K | Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. Includes Test Re | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-4/7L/500KHZ | POWER LINK METAL SHAFT SURFACE PROBE .125" DIA TUBING 4 .0" LONG 7 PIN LEMO CONNECTOR 200KHZ-1MHZ. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-4/7L/6M | Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 1 MHz - 6MHz frequency range and has a center frequency of 2 Mhz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. Includes Test Report | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-45-6/7L | ABSOLUTE BRIDGE SURFACE PROBE, ANGLE SHAFT, 45° DEGREES TIP. 0.5" INCH. (12.7MM) DROP, 100KHz-500KHz,. 0.125"Ø (3.17MM) SHAFT WITH A 7 PIN LEMO POWERLINK CONNECTOR, 6.0” LONG. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-45-6/7L/1-6MHZ | SURFACE PROBE, ABSOLUTE BRIDGE, ANGLED SHAFT, 45° DEGREE TIP, 0.5"(12.7MM) DROP, .125"Ø (3.17MM) SHAFT. FREQUENCY RANGE: 1-6MHz,. 6.0” LONG. SUPPLIED WITH A 7 PIN LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-455-4FX/7L | ABSOLUTE BRIDGE FLEXIBLE PROBE. 4.0” LONG. 45 DEG. TIP. 0.5 IN. (12.7MM) DROP. 50KHZ-500KHZ. 0.125IN. (3.17MM) SHAFT. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-455-6/7L | POWERLINK ABSOLUTE BRIDGE SURFACE PROBE. 6.0” LONG. 45° DEGREES, 0.5" (12.7MM) DROP AT THE TIP. FREQUENCY: 50KHz-500KHz. 0.125IN. (3.17MM) SHAFT. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. U8629722, 9403425 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-903-6/500K/7L | Absolute Shielded / Bridge Pencil Probe. , 200 kHz - 1 MHz with a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length supplied with a 7 Pin Fischer/LEMO "PowerLink" connector. Includ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-95-10/7L | ABSOLUTE BRIDGE RIGHT ANGLE. 10.0” LONG. 100KHZ-500KHZ. 0.125IN. (3.17MM) SHAFT SIZE. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance..... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-95-6/7L | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APNR-3/7L | ABSOLUTE REFLECTION STRAIGHT SURFACE PROBE. 3” LONG. 50KHZ-500KHZ. 0.125IN. (3.17MM) SHAFT SIZE. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APNR-45-6/7L | SURFACE PROBE, ABSOLUTE REFLECTION ANGLE SHAFT. 6.0” LONG. 45 DEG TIP. 0.5 IN. (12.7MM) DROP. 50KHZ-500KHZ. 0.125"Ø (3.17MM) SHAFT WITH A 7 PIN LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT7356-01 | PULLER, MECHANICAL-POWER OUTPUT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA12155 | HOLDER OUTER POWER CROSS OVERSHAFT | 6 | |
| PWC51250 | BASE, POWER TURBINE SHAFT | 1 | |
| PWC51981 | PAD, POWER TURBINE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC51983 | PowerTURBINE SHAFT BASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70763 | PowerTURBINE SHAFT BASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB23005022 | MANDREL-INNER POWER TURBINE SHAFT. USED TO SIZE THE POWER TURBINE INNER SHAFT | 1 | |
| RB23005424 | MANDREL INNER POWER TURBINE SHAFT | 1 | |
| RB6795984 | Power Turbine Holder Shaft | 1 | |
| RB6795985 | Wrench-Power Turbine Shaft Ball Bearing Ret Nut | 1 | |
| RB6795990 | Dummy Bearing Power Turbine Shaft Front | 1 | |
| RB6893398 | Plate, Bearing Puller Power Takeoff Shaft Front | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB6893399 | Plate, Bearing Puller, Power Takeoff Shaft Rear | 1 | |
| T-8812478000 | Power Shaft Support | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TA5071G001 | POWER OUTPUT SHAFT BLANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TM4377G001 | FREE TURBINE POWER SHAFT CONTAINER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
