| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98D07203002100 | FITTING FITTING FOR | 7 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98D07203002100 | FITTING FITTING FOR FR 42 (RH AND LH AR (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98S55305011000 | CALIBRATION STANDARD FOR VTP FITTINGS INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1/N-02-384 | Nomad Series N22 & N24 Reference Standard. for the inspection of Wing Strut Upper Fittings, Figure 27 Page 51. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 125HBL-4-4 | PNEUMATIC FITTING FOR OD TUBING -1/4X1/4 HOSE BARB | 1 | |
| 125HBL4-4 | PNEUMATIC FITTING FOR OD TUBING -1/4X1/4 HOSE BARB | 1 | |
| 16A46049-1 | WRENCH KIT, ATTACH FITTING - FORWARD | 2 | |
| 185R105-002A | ROUTER FOR MILLING NEW JOINT FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 284-000-03 | BRASS FITTING FOR 115-00056 | 3 | |
| 28654-1 | FITTING TAPER FOR SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402471-1 | FORWARD LIFT FITTING ASSEMBLY - QEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402471-33 | FITTING,FORWARD LIF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 365A93-3383-20 | FORK FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 42-903-04-050 | SPECIAL PRESSING TOOL FOR FITTING THE INNER OF RACES B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 470-27807J | FITTING PLATES FOR BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 470-27811J | FITTING PLATE FOR BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5007 | SCHRADER 5007 HIGH PRESSURE STRUT COUPLER - 716-20 THREAD FOR 314 FITTING | 4 | |
| 5225K324 | PUSH -TO-CONNECT TUBE FITTINGFOR AIR | 1 | |
| 5253-3 | DRIVE TOOL (FOR ALEMITE TYPE 1728B LUBRICATION FITTINGS) | 7 | |
| 5254-1 | DRIVE TOOL - 5254-1 (FOR ALEMITE 1646B AND 1992B LUBRICATION ANGLE FITTINGS) | 4 | |
| 57A3052 | TRANSDUCER (ENGINE 1 FORWARD MOUNT BULKHEAD FITTINGS) “(45 DEG. IN STEEL) (6.4 X 6.4 MM) | 1 | |
| 5803 | NEEDLE NOZZLE (FOR LINCOLN GREASE FITTINGS) | 6 | |
| 6703-A | HOSE,1FT LONG FOR HYDROLIC FITTING 103A-PR-92164-004 PART NO.- 6703-A MANUF.- ALEMITE | 1 | |
| 67259-187-101 | MANDREL FOR FITTING MOUNTING PLATE OIL SEAL TO ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6901A701-2650 | TOOLING FOR FITTING OF THE RING | 1 | |
| 76209-73039-045 | FORWARD SILL STRUT ATTACH FITTING, LEFT SIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 790004-1 | ASSY (FOR LINCOLN GREASE FITTINGS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3491G03 | ANTI-TORQUE FOR #5 FITTING | 3 | |
| 9132 | END FITTING FEMAALE FOR C21003-76 | 1 | |
| 9142 | End Fitting (Male) for C21003-76 | 2 | |
| 23867 | MANDREL FOR FITTING RINGS | 1 | |
| 28793 | FITTING TAPER FOR PISTON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 098370 | FITTING FORMING | 1 | |
| 98645 | TOOL FOR FITTING BUSH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 705516 | SHRINKING TOOL FOR END FITTING SELF ALIGNING BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 708499 | Tool for Fitting the Packings | 1 | |
| 728650 | FITTING FOR THE SPRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001396 | Hydraulic helicopter ground handling wheels for Bell 214ST and other military aircraft.The 002105 are caster wheels for helicopters with fitting on the forward ends of the skid tubes.Specifications: Bell 214ST and other military aircraft Skid tube dia. 4. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001887 | Econo crate (open sided crate) for products fitting on standard pallet. Meets ISPM 15 fumigated wood shipping requirements. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2010793 | 2nd Fuel Lift Assembly for 2010790 Fueling Stand. 450GPM. Includes surge suppressor, nozzle pressure gauge, 10' x 2.5' EI1529 rated hose and Cla-Val nozzle and bottom load fittings. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2010795 | Main Fuel Lift Assembly for 2010789 Fueling Stand. 450GPM. Includes surge suppressor, nozzle pressure gauge, 10' x 2.5' EI1529 rated hose and Cla-Val nozzle and bottom load fittings. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2010796 | Main Fuel Lift Assembly for 2010790 Fueling Stand. 450GPM. Includes surge suppressor, nozzle pressure gauge, 10' x 2.5' EI1529 rated hose and Cla-Val nozzle and bottom load fittings. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2561536 | Spec. Fitting for P. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 027550169 | Schrader 2755 High Pressure Strut Coupler - 38-24 Thread for 316 Fitting | 1 | |
| 050070099 | Schrader 5007 High Pressure Strut Coupler - 716-20 Thread for 314 Fitting | 1 | |
| 81267700 | ADAPTER FOR FILLING FITTING | 4 | |
| 1470220406 | WRENCH-12FLATS, OPEN END, FOR AN818 FITTINGS | 2 | |
| 8819323000 | HOISTING FORK FITTING | 1 | |
| 8819389000 | CONNECTOR FITTING FOR THE LOW-FUEL PRESSURE SWITCH | 5 | |
| 96100-10940 | HOISTING FORK FITTING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 96100-109400 | HOISTING FORK FITTING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A57103024000 | DRILLING GUIDE FOR FITTING REPLACEMENT | 1 | |
| 98D07203002100 | Fitting for FR 42 (RH and LH AR | 7 | |
| 98D57103000000 | DRILL,GUIDE-FOR PRESSURIZED FLOOR FITTINGS | 1 | |
| 98F07203000120 | SHIM PLATE FOR FITTING C17 LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F07203000120-SHIM-LH | SHIM PLATE FOR FITTING C17 LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F07203000121 | SHIM PLATE FOR FITTING C17 RH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F07203000121-SHIM-RH | SHIM PLATE FOR FITTING C17 RH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L53509016000 | PLATFORM, INSPECTION - FITTINGS | 3 | |
| 98S53305002-200 | FORWARD AND AFTERWARD LATCH FITTINGS OF CARGO DOOR | 4 | |
| 98S71003000222 | ATR / ENG FORWARD FITTING | 1 | |
| 99F57204172000 | Airbus A330-300} {A330-200}, 57-29-05 SPIGOT FITTING ATTCHMENT FLANGE AT HOLES 5 AND 11, LH/RH WINGS (2017-02-23 09:21:37) Mateial: 2024-T351. Includes Test Report and Certificate of Conformance. | 1 | |
| A07001-11 | FITTING - JACK, FORWARD BODY | 15 | |
| A20002-17 | FITTING (FOR B767) | 2 | |
| A330-53-011 | DRILLING SET FOR HOISTPOINTS FITTINGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52004-101 | EQUIPMENT - FITTING, FORWARD AND AFT LARGE CARGO DOOR | 3 | |
| A52004-41 | FITTING EQUIP, FOR FWD AND AFT CARGO DOOR | 5 | |
| A52004-42 | FITTING EQUIP, FOR FWD LARGE CARGO DOOR | 6 | |
| A52004-43 | FITTING EQUIP FOR FWD LARGE CARGO DOOR | 12 | |
| A52004-45 | Equipment - Fitting, Forward And Aft Large Cargo Door | 6 | |
| ACTR9600-3 | CENTER T FITTING FOR BLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AF-5221 | CUSTOM HIGH FREQUENCY EDDY CURRENT PROBE FOR EDGE DEFECT DETECTION FOR THE KC10 ARB SUPPORT FITTING. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM1928-156 | CF6-80C2B/F ENGINE TRANSPORTATION STAND, WITH FITTINGS FOR BOOTSTRAP | 6 | |
| AN816-3D | FITTING – ADT / CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE ADT ASSEMBLY | 2 | |
| AP-AIR290-4 | REPLACEMENT HOSE AND FITTING FOR AP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ASK4102-10DP | TOOL KIT FOR REPLACEMENT OF AILERON HINGE FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71007-119 | THE FORWARD ATTACH FITTING ASSEMBLIES | 1 | |
| BRA14MLF11 | FITTING FOR MAIN LINE OFF COMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C-130-WR | C-130 Outer Wing Rainbow Fitting Bolt Hole Standard C-130, 2 Layers, 3 HOLES, 3/4", 7/8" and 1.0" with .004" X .030" X .030" EDM Notches in each hole. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C07007-1 | JACK FITTING - FORWARD BODY STATION 294.5 | 14 | |
| C07007-11 | JACK FITTING - FORWARD BODY STATION 294.5 | 8 | |
| C07007-19 | JACKING FITTING FORWARD BODY | 19 | |
| C07007-22 | JACK FITTING - FORWARD | 1 | |
| C07011-1 | TETHER FITTING - FORWARD BODY JACK LOCATION | 1 | |
| C07011-11 | TETHER FITTING - FORWARD BODY JACK LOCATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27052-FTGS | SET OF (6) FITTINGS FOR -25 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36001-FITTINGS | FITTING FOR ENGINE BLEED AIR SYSTEM TEST EQUIPMENT 737-300 THRU -500 & 757. | 1 | |
| C71003-118 | FORWARD OUTBOARD HOIST FITTING ASSEMBLY | 5 | |
| C71003-129 | FORWARD INBOARD HOIST FITTING ASSEMBLY | 4 | |
| C71003-130 | FORWARD INBOARD HOIST FITTING ASSEMBLY | 4 | |
| C78018-6 | FORWARD HINGE FITTING ASSEMBLY | 8 | |
| CLE23792 | WRENCH FOR END FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAT06AETA5005 | DEUTSCH LITE HEAD ASSEMBLY DAT06AETA5005 SIZE #5, 5/16″ INCH IS FOR SWAGING STAINLESS STEEL HYDRAULIC FITTINGS. | 1 | |
| DLTFRPSKT3002 | SWAGGING FITTINGS KIT FOR HYD LINES | 4 | |
| F21921 | EXTRACTOR FOR END- FITTING ASSY | 1 | |
| F26738000 | FITTING TOOL FOR BALL BEARING | 2 | |
| F50B955604 | TOOL SET FOR STABILIZER HINGE FITTINGS NDT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F50B955604005 | CALIBRATION PLATE FOR FIN FORWARD FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F50B955604007 | CALIBRATION PLATE FOR FIN REAR FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F50B955604009 | CALIBRATION PLATE FOR FUSELAGE FIN FORWARD FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F50B955604011 | CALIBRATION PLATE FOR FUSELAGE FIN REAR FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F50B955604013 | CALIBRATION PLATE FOR HORIZONTAL STABILIZER REAR FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F50B955604017 | CALIBRATION PLATE FOR HORIZONTAL STABILIZER FORWARD FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F533-R5851-200W2300-01 | DRILLING FIXTURE FOR FITTING 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F533-R5858-200W2300-01 | DRILLING FIXTURE FOR FITTING 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-B-TF | TOP FITTING FOR APU FISHPOLE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-B-TF-8 | ROLLER FOR BOEING FISHPOLE TOP FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G07007-1 | Tether Fitting -Forward Body Jack Location | 2 | |
| G27079-1 | REMOVAL/INSTALLATION EQUIPMENT - FORWARD ATTACH FITTING, INBOARD TRAILING EDGE FLAPS | 3 | |
| G78008-79 | Forward Upper Fitting Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55720-104 | POSITIVE-GRIP FORK FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H47827 | HOLDING TOOL FOR END FITTING | 1 | |
| IL2940-1 | NORCO FITTING FOR TOOL P/N 24MIT65B00002 | 3 | |
| J07001 | JACK FITTING-FORWARD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07001-23 | JACK FITTING - FORWARD BODY | 4 | |
| J07001-25 | JACK FITTING - FORWARD BODY | 11 | |
| J32010-106 | FITTING-JACK, FORWARD BODY | 7 | |
| J47231 | CASTELLATED WRENCH FOR ADJUSTABLE END FITTING ON TELESCOPIC LOCKING STRUT (NLG) | 1 | |
| J78004-78 | FORWARD HINGE ATTACH FITTING | 1 | |
| J78004-80 | FORWARD HINGE ATTACH FITTING | 1 | |
| J78004-90 | ATTACHMENT FITTING, SLING EQUIPMENT - GE90 FAN THRUST REVERSER HINGE, GE90 FAN T/R SLING (GE90-70/80/90 SERIES & -100 SERIES) 78004-90 REPLACES BOTH J78004-75 AND -76 FOR FUTURE PROCUREMENT. | 11 | |
| J78004-94 | FORWARD HINGE ATTACH FITTING | 1 | |
| K07003 | JACK FITTING-FORWARD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07003-1 | Jack Fitting - Forward Body | 2 | |
| K07003-15 | Fitting - Jack, Forward Body | 6 | |
| K07008-1 | TETHER FITTING - FORWARD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KM57 KIT | ROSAN FITTING REPLACEMENT FOR INSTALLING O-RINGS AND REMOVING LOCKRINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5910 | Grease Fitting Assortments ( Uses: For Domestic & Foreign Cars & Trucks. ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT9914 | FITTING, FORCE GAGE | 1 | |
| M0NT23856-1 | MANDREL FOR FITTING RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT23856-2 | MANDREL FOR FITTING RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT23856-3 | MANDREL FOR FITTING RINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT23875-1 | MANDREL FOR FITTING RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT23875-2 | MANDREL FOR FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT27437 | TOOL-FOR FITTING SQUARE BRACKETS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT725753 | TOOL FOR FITTING MALE PACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT725754 | TOOL FOR FITTING MALE PACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT725755 | TOOL FOR FITTING MALE PACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M46690 | GUIDE FOR THE FITTING OF THE DRIVE BLOCK | 5 | |
| M65724147 | FORCE FITTING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME65B00718 | TETHER FITTING SET - FORWARD OUTBOARD STRUT, AIRPLANE RECOVERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MODEL 111B | OXYGEN ANALYZER, PORTABLE, BATTERY OPERATED, ACCEPTABLE FOR USE IN CLASS I, DIVISION II AREAS. INCLUDES HOSE/FITTING TO MATE WITH BOEING AIRPLANE NITROGEN GENERATION SYSTEM OXYGEN TEST PORT. | 1 | |
| MS20667-12 | FORK END FITTING | 1 | |
| MS21902J4 | STANDARD FITTING FOR COMBUSTOR DRAIN | 8 | |
| MS24203-1 | NEEDLE FITTING FOR LUBE KIT | 12 | |
| NAEF4 | CONNECTOR; PNEUMATIC; CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE DOAR DATA TEST EQUIPMENT SET; ALUMINUM | CONNECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OU190863-040 | Fork fitting | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PITOT STATIC TEST FITTINGS KIT | FITTINGS FOR AIR DATA TEST SET 11 PCS. | 1 | |
| PWA77163 | T-BAR FOR AP47 PORT REMOVAL AND FITTING | 1 | |
| PWC38147 | FITTING-CHIP DETECTOR, FOR RGB OIL DRAINING | 13 | |
| PWC57154 | FITTING − CHIP DETECTOR, FOR RGB OIL DRAINING | 7 | |
| Q46090 | TIGHTENING ADAPTER FOR END FITTING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Q46250 | WRENCH FOR END FITTING | 1 | |
| Q47016 | Pin For Alignment Of End Fittings | 3 | |
| Q47244 | WRENCH FOR ADJUSTABLE END FITTING LOCK NUT OF RETRACTION STRUT (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R46115 | FITTING TOOL FOR SEAL | 2 | |
| S16-0142-00850 | FITTING DRIFT FOR BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S16-0142-01050 | FITTING DRIFT FOR BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SCHRADER 2755 | SCHRADER 2755 HIGH PRESSURE STRUT COUPLER - 3/8"-24 THREAD FOR 3/16" FITTING | 1 | |
| SKYDROL | FITTING FOR SKYDROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPD74484 | 5/16IN FITTING FOR SPDTU443 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1491 | JACK FITTING - FORWARD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1990 | EQUIPMENT - FITTING, FORWARD AND AFT LARGE CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST878D | KIT - PRESET TUBE FITTING, "SLEEVE SET", FOR PRESETING BACS13AP FLARELESS TUBE FITTING (NOT FOR TITANIUM TUBING) (SET OF | 9 | |
| ST879A | Hand Presetting Tool For Flareless Tube Fittings Ms21922 | 8 | |
| ST879A-1 | KIT - PRESET TUBE FITTING, "SLEEVE SET", (NOT FOR TITANIUM TUBING) (SET OF 25 EA. DIES, MANDRELS, & CLAMPS) | 1 | |
| ST879A-D-4 | Hand Presetting Tool for Flareless Tube Fittings | 1 | |
| ST879A-D-6 | Hand Presetting Tool for Flareless Tube Fittings | 2 | |
| ST879A-M-4-028 | Hand Presetting Tool for Flareless Tube Fittings | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST879A-M-6-035 | Hand Presetting Tool for Flareless Tube Fittings | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST931E-500-1000 | SWAGING TOOL - THRUST LINK FITTING, FORWARD ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-6100 | FITTING - NYLON, 1" ID X 1 NPT WITH BARBED END FOR HOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-3042 | Special Bore Probe, 90° for 18° hole edge, elongated coil, AFT Fitting | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-3047 | Special Bore Probe, 90° for 5° hole edge, elongated coil, FWD Fitting | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TM0520G001 | FITTING FOR T.P.D TEST | 2 | |
| U21989 | TROLLEY FOR MAIN FITTING ASSY | 1 | |
| W0036E | Ionic Systems 3/8 in Elbow Fitting For Ionic 100 psi Pump | 1 | |
| ZA0014AA0-E101 | FORWARD FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
