RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| '10/4180 | BOEING FISHPOLE HOIST | 1 | |
| (CALIB) 429EB | ARINC 429 TX/RX w/Boeing (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 429EBP | ARINC 429 TX/RX Boeing + Printer (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) A57001-1 | JIG EQUIPMENT - REAMING, TRUNNION SUPPORT, CAGE CODE 81205 - BOEING (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) AGE17077B | GROUND TEST TOOL BOEING 787 RAM AIR TURBINE (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) TOWB757-C | TOWBAR BOEING 757 (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| - | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0702-0000 | Multi-Head, Boeing 737 | 2 | |
| 01-0703-0000 | Multi-Head, Boeing 737 | 1 | |
| 01-0704-0000 | Multi-Head, Boeing 757 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0705-0001 | Multi-Head, Boeing 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0707-0000 | Portable-Hd, Boeing737 (Clamp) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0708-0000 | Portable-Hd, Boeing 737 (Pin) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0709-0000 | Por-Hd,Boeing737(Boeing Clamp) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0711-0000 | Portable-Head, Boeing 757 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0712-0000 | Portable-Head, Boeing 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0713-0000 | Multi-Head, Boeing 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-0714-0000 | TOWBAR: MULTI-HD, BOEING 737-100/900 | 2 | |
| 01-1165-0011 | BOEING TOWBAR B727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-1204-0010 | TOWBAR, CUSTOM BOEING 747 | 3 | |
| 01-1205-0010 | TOWBAR: CUSTOM,BOEING,757, | 3 | |
| 01-1246-0010 | TOWBAR, CUSTOM BOEING 737 | 3 | |
| 01-1247-0000 | Towbar, Custom Boeing 727 | 2 | |
| 01-1248-0000 | Towbar, Custom Boeing 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-1318-0000 | Towbar, Custom Boeing 707 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-1319-0000 | Towbar, Boeing 737-100/200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-1340-0100 | Towbar, Custom Boeing 777 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 01-1359-0100 | Tbar, Boeing 737-100/900 Custo | 3 | |
| 019 | BOEING REFERENCE STANDARD 7075-T6 ALUMINUM 7075 57-10-07 PART 6 PG.216. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 02-441FBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages For Use With Boeing® BACR15FT Rivet Cutters. ( Type: Standard Skirt Model )( Capacity: 5/8" )( Shaft Travel: 5/16" )( Depth Adjustment: 0.001" )( Maximum Rpm: 3000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 02-441FBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages For Use With Boeing® BACR15FT Rivet Cutters. ( Type: Standard Skirt Model )( Capacity: 5/8" )( Shaft Travel: 5/16" )( Depth Adjustment: 0.0005" )( Maximum Rpm: 3000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 02-441SBACR15FT | Boeing® BACR15FT Micro-Stop Countersink Cages For Use With Boeing® BACR15FT Rivet Cutters. ( Type: Flanged Skirt Model )( Capacity: 5/8" )( Shaft Travel: 5/16" )( Depth Adjustment: 0.001" )( Maximum Rpm: 3000 ) | 1 | |
| 02-441SBACR15FT-1 | Boeing® BACR15FT Micro-Stop Countersink Cages For Use With Boeing® BACR15FT Rivet Cutters. ( Type: Flanged Skirt Model )( Capacity: 5/8" )( Shaft Travel: 5/16" )( Depth Adjustment: 0.0005" )( Maximum Rpm: 3000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 02-7802C0111 | TRIPOD JACK 12 TON (CE) - ATR 42, 72, BOEING 707, DASH 7, DASH 8-100, 8-200, 8-300, FOKKER 27, FOKKE | 8 | |
| 02A7844C0111 | Jack, Tripod 30 Ton (Ce) - With Air Pump - Boeing, Global 5000/6000, Gulfstream Aircraft | 6 | |
| 02A7895C0100 | Jack, Tripod 40 Ton (Ce) - 60 to 120 inches - Boeing 737 - Main Fuselage | 5 | |
| 02A7896C0100 | Jack, Tripod 15 Ton (Ce) - 54 to 106 inches - Boeing 737 Forward Fuselage | 4 | |
| 02A7897C0100 | JACK, TRIPOD 15 TON (CE) - 100 TO 152 INCHES - BOEING 737 AFT FUSELAGE (TAIL) | 4 | |
| 038 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 1 FIGURE 8 SHEET 7 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.71 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 039 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 3 FIGURE 8 SHEET 9 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.73 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-10-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-10-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | 2 | |
| 07-10-4705BAC | BOEING® BACR15FT MODIFIED UNIVERSAL RIVET SETS .401" SHANK ( CUPPING SIZE: 5/32" )( OVERALL LENGTH: 3-1/2" (89 MM) )( SHANK: .401" )( TYPE: STRAIGHT ) | 2 | |
| 07-10-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | 2 | |
| 07-10-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-10-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | 1 | |
| 07-10-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-11-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-12-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-13-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-14-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-15-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-15-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-15-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-15-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | 1 | |
| 07-15-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-15-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-15-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 2-1/2" (64 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-20-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-21-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-22-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-23-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-24-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-30-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | 1 | |
| 07-31-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-31-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-31-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-31-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-31-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-31-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-31-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-32-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-33-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-34-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-40-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-41-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-42-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-43-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-44-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-50-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-50-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-50-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-51-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-51-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-51-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-52-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-52-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-52-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-53-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-53-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-53-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-54-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-54-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-54-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-60-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-60-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-60-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-61-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-61-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-61-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-62-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-62-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-62-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-63-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-63-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-63-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-64-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-64-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-64-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-70-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-70-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-70-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-71-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-71-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-71-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-72-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-72-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-72-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-73-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-73-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-73-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-74-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-74-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-74-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-80-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-80-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-80-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-81-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-81-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-81-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-82-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-82-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-82-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-83-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-83-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-83-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-84-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-84-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-84-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1 H-STAB REF STD | Boeing Reference standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10-3641C3 | BOEING FISHPOLE HOIST | 4 | |
| 10-62237-4 | BRAKE, BOEING 737 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10/3641 | BOEING FISHPOLE HOIST | 2 | |
| 10/3641C3 | FISHPOLE HOIST KIT (ALL BOEING) | 4 | |
| 10/4180 | APU R/I (2 HOIST APPLICATION) ECR BOEING FISHPOLE HOIST KIT TELESCOPIC EXTENSION TUBE | 1 | |
| 1000A | BOEING STANDARD, 707 PT6 55-10-07 FIG10: PG48 FIG1 | 1 | |
| 1000B | Boeing Standard, 707 PT6 55-10-07 FIG10: PG49 FIG10 SHEET7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1002-321 | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1002-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8.00 | BOEING B707 MLG AXLE JACK | 2 | |
| 123 | BOEING TRANSDUCER POSITIONER FIXTURE 737 PT 4 52-1 | 2 | |
| 125 | BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 126 | BOEING REFERENCE STANDARD PT 6 51-00-01 FIG 4. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 7 | |
| 128 | BOEING REFERENCE STANDARD 767 PT 6 51-00-06 PAGE 4 FIGURE 1, MATERIAL: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 134 | Boeing Reference Standard 707 Part 4 53-40-07 Page 12 Figure 2 (Sheet 6) Detail 3. Material: 4330M or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
| 181 | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 182 | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 17. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 185 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13 | 2 | |
| 189 | BOEING REFERENCE STANDARD | 7 | |
| 192 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13. Includes Test Report and Certificate of Conformance. | 4 | |
| 194 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 FIGURE 1., BOEING 757 PART 6 53-30-02 PAGE 5 FIGURE 2. | 9 | |
| 206 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. | 3 | |
| 208 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. | 1 | |
| 239 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 240 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18 | 1 | |
| 262 | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 | 1 | |
| 263 | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 PAGE 4 FIG 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 272 | BOEING REFERENCE STANDARD 727, PT 6 55-10-27 FIG. 2 Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 285 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K23). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 286 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K21). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 296 | BOEING REFERENCE STANDARD 727 PT 6 53-30-27 Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 305 | BOEING REFERENCE STANDARD 737 PART 6 57-10-18 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 312 | BOEING STANDARD, 737 PT6; 53-10-17; PG6; FG2 | 7 | |
| 313 | BOEING STANDARD, 737 PT6; 53-10-17; PG7; FG3 | 20 | |
| 315 | BOEING STANDARD, 737 PT4 55-30-01:PG5 FIG2 | 4 | |
| 316 | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 317 | BOEING STANDARD, 737 PT6 53-10-16:PG5 FIG2 | 1 | |
| 320 | BOEING REFERENCE STANDARD 737 PART 6 55-10-19 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 321 | BOEING REFERENCE STANDARD 737 PART 6 53-10-19 FIGURE 3 PAGE 6. INCLUDES TEST REPORT AND CERTIFICATE | 7 | |
| 326 | BOEING REFERENCE STANDARD 737 PART 6 53-10-28 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| 330.00 | Boeing B737 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 335 | BOEING REFERENCE STANDARD 737 PT 6 53-10-31. INCLU | 10 | |
| 341 | BOEING REFERENCE STANDARD 737 PART 4 53-10-40 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 345 | BOEING REFERENCE STANDARD 737 PART 6 57-40-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 349 | BOEING REFERENCE STANDARD 737 PART 4 32-10-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 350 | BOEING REFERENCE STANDARD 737 PT 4 32-20-01 FIG 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 356 | BOEING STANDARD, 737 PT6 53-30-04:PG10 FIG2 | 9 | |
| 363 | BOEING REFERENCE STANDARD 737 53-30-03 PT6 PG3 | 4 | |
| 365 | BOEING STANDARD, 737 PT4 71-20-01:PG4 FIG1 | 4 | |
| 367 | BOEING REFERENCE STANDARD 737 PT 6 71-20-01 FIGURE 4, PG. 10-12 (SHEETS 1-3) INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| 369 | BOEING STANDARD, 737 PT6 53-30-05: PG6 FIG2 SHEET4 | 2 | |
| 370 | BOEING REFERENCE STANDARD 737 PT 4 53-30-02 FIG 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 375 | BOEING REFERENCE STANDARD 737 PT 4 55-10-02. Includes Test Report and Certificate of Conformance. | 2 | |
| 378 | BOEING STANDARD, 737 PT6 53-10-44:PG5 FIG2 | 1 | |
| 383 | BOEING REFERENCE STANDARD 737 PART 6 53-30-07 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| 401 | BOEING REFERENCE STANDARD 747 PT 4 57-10-01 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 402 | BOEING STANDARD, 747 PT4 57-10-04: FIG1 PG5 | 2 | |
| 403 | BOEING REFERENCE STANDARD PT 4 57-10-04 FIG 2, PAGE 6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 404 | BOEING STANDARD, 747 PT6 57-10-08:PG5 FIG2 | 5 | |
| 405 | BOEING REFERENCE STANDARD 747 PT 4 57-10-02 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 406 | BOEING STANDARD, 747 PT6 57-10-09:PG6 FIG2 | 12 | |
| 408 | BOEING REFERENCE STANDARD PT 4 57-10-03 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 410 | BOEING REFERENCE STANDARD 747 PT 4 57-10-05 Page 6 Figure 3. Includes Test Report and Certificate of Conformance. | 4 | |
| 411 | BOEING REFERENCE STANDARD PT 6 55-10-04 FIG 1, PAGE 4. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412 | BOEING REFERENCE STANDARD PT 6 55-10-01 FIG 1, PAGE 3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 423 | BOEING 747 REFERENCE STANDARD PART 6 57-10-17 FIGU | 3 | |
| 424 | BOEING 747 REFERENCE STANDARD PART 6 57-10-17 FIGURE 3 PAGE 9. Includes Test Report and Certificate of Conformance. | 3 | |
| 426 | BOEING REFERENCE STANDARD PT 4 55-10-01 FIG 1, PAG | 1 | |
| 431 | BOEING REFERENCE STANDARD PT 6 53-10-19 FIG 1, PAG | 3 | |
| 432 | BOEING REFERENCE STANDARD 747 PT 6 57-30-02 Page 4 Figure 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 435 | BOEING STANDARD 747 PT6 57-10-20 | 1 | |
| 436 | BOEING STANDARD 747 PT6 57-10-20 PG8 | 3 | |
| 437 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE | 1 | |
| 438 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 439 | BOEING STANDARD, 747 PT6 57-10-22:PG5 FIG2 | 2 | |
| 440 | BOEING REFERENCE STANDARD 747 PT 4 57-10-11 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| 441 | BOEING STANDARD, 747 PT4 57-10-11: FIG2 PG5 | 1 | |
| 442 | BOEING REFERENCE STANDARD PT 4 53-10-02 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 2 | |
| 443 | BOEING REFERENCE STANDARD PT 4 53-10-02 FIG 2, PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| 446 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 447 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 448 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 449 | BOEING REFERENCE STANDARD 747 PT 4 57-10-13 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460 | BOEING REFERENCE STANDARD 747 PART 6 57-10-28, PAGE 3 FIGURE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 471 | BOEING STANDARD, 747 PT4 57-30-02: FIG1 PG4 | 4 | |
| 474 | BOEING REFERENCE STANDARD PT 6 53-10-20 FIG 1, PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 475 | BOEING 747 REFERENCE STANDARD PART 6 57-10-27 FIGURE 1 PAGE 4. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| 476 | BOEING REFERENCE STANDARD PT 6 53-10-18 FIG 3, PAGE 6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 477 | BOEING REFERENCE STANDARD PT 6 53-10-18 FIG 3, PAGE 6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 478 | BOEING REFERENCE STANDARD PT 6 5-10-18 FIG 3 PAGE 6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 482 | BOEING 747 REFERENCE STANDARD PART 6 55-10-08 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 483 | BOEING 747 REFERENCE STANDARD PART 6 55-10-08 FIGURE 3 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 484 | BOEING 747 REFERENCE STANDARD PART 6 55-10-25 FIGURE 1 PAGE 4. INCLUDES TEST REPORT AND CERTIFICATE | 2 | |
| 490 | BOEING REFERENCE STANDARD 747 PT 4 57-30-06 Page 5 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 497 | BOEING REFERENCE STANDARD 767 PT 6 53-00-05 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 506 | REFERENCE STANARD 757 BOEING | 4 | |
| 602 | BOEING REFERENCE STANDARD 767 PT 4 32-10-01 FIG 2 Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 603 | BOEING REFERENCE STANDARD 767 PT 4 55-10-01 FIG 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 605 | BOEING REFERENCE STANDARD 767 PT 6 22-10-01 FIG 2. Includes Test Report and Certificate of Conformance. | 4 | |
| 608 | BOEING REFERENCE STANDARD 767 PT 4 27-80-01 FIG 4 Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 610 | BOEING REFERENCE STANDARD 767 PT 4 32-20-01 | 1 | |
| 914.00 | Boeing B737 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 916.00 | Boeing B737 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 916.10 | Boeing B737 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 917.00 | Boeing B737 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1001 | Boeing Standard | 10 | |
| 1002 | BOEING REFERENCE STANDARD PT 6 51-00-00 Part 6 FIG 4. Includes Test Report and Certificate of Conformance. | 5 | |
| 1003 | BOEING STANDARD, 747 PT6 51-00-00:PG13 FIG14 DETAI | 6 | |
| 1003-321 | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1003-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1004 | BOEING STANDARD, 737 PT6 51-00-00 PROCEDURE 14, PG11, FG6, 6AL-4V 787 PT6 51-00-05 PROCEDURE 1, PG10 | 6 | |
| 1004-321 | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1004-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1005 | BOEING REFERENCE STANDARD | 6 | |
| 1005-321 | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1005-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00443 | Fuel Quantity Adapter Module for Boeing 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00444 | Fuel Quantity Adapter Module for Boeing 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00475 | Fuel Quantity Adapter Module for Boeing 720 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00542 | BARFIELD FUEL QUANTITY ADAPTER MODULE FOR BOEING 727, 737 | 1 | |
| 101-00543 | Fuel Quantity Adapter Module for Boeing 757, 767 | 10 | |
| 101-00547 | Fuel Quantity Indicator Adapter Cable for Boeing 101-00542 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00548 | Barfield Fuel Quantity Adapter Module for Boeing 757, 767 | 3 | |
| 101-00562 | Fuel Quantity Adapter Module for Boeing 737Â600/700/800 | 4 | |
| 101-00563 | Fuel Quantity Adapter Module for Boeing 727, Boeing 737 -Dig Tank | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-01520 | Fuel Quantity Adapter Module for Boeing 747-100, 747-200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1060.00 | BOEING B747 NLG AXLE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1060.60 | BOEING B787 NLG AXLE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1060.68 | BOEING B787 NLG AXLE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10COWLPYLON737MAX | 10' ALUMINUM COWL PYLON LADDER FOR BOEING 737MAX | 1 | |
| 10RS.01.1 | BOEING REFERENCE STANDARD KC10 Page 1-6 MATERIAL: 2024-T3, 7075-T6, 6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.02 | BOEING REFERENCE STANDARD KC10 53.10.001, 53.10.013/.014 Page 1-8 Material: 2024-T3 and 7075-T6, 6AL-4V or Phenolic. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.48 | BOEING REFERENCE STANDARD - KC10. Page 1-23. Material: 2024-T3, 7075-T6, and 7150-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.51-MLG-FTG-FF:10RS.52-1-MLG-FTG-AF | Boeing Std, w/ 2 ea .032 corner notch and 2 ea .050 corner notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.52-2-MLG-FTG-AF | Boeing Std, w/ 2 ea .060 corner notch and 2 ea .070 corner notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.55-1 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -63 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.55-3 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -163 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.55-5 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -363 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10RS.55-7 | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -103 SKIN, -53 TEAR STRAP, -563 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112DM40159 | RIVET SET - BOEING 5/32 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112DM40169 | RIVET SET - BOEING 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112DM40189 | RIVET SET - BOEING 1/4 R15BB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112MBM40163 | RIV SET-STR-BOEING-3.5-FT6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112MBR40165 | RIVET SET- BOEING 3/16 FT CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112MBR40175 | RIVET SET- BOEING 7/32 FT CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112MBR40183 | RIVET SET- BOEING 1/4 FT CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112MDM40166 | RIVET ST BOEING 3/16 FT CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1112MDM40169 | RIVET SET- BOEING 3/16 FT CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C4308P01 | PROBES-WATER WASH, GENX ENGINES, SHORT (BOEING REF | 1 | |
| 11C4308P02 | ENGINE PROBE BOEING 787, BOEING 747-800 GENX (LONG AND SHORT PROBES COMBINATION SET) | 1 | |
| 1211.00 | Boeing B757 TAIL JACK | 1 | |
| 126-1 | BOEING STANDARD, 747 PT6 51-00-00 PG10: FIG23, DET | 2 | |
| 126-2024T3 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 2024-T3 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 126-4340 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV, Steel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 126-7075T6 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 7075-T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 126-R&D | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, with 4 additional notches | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 126-R&D Ti | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, with 4 additional notches, Titanium | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-.032 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.036 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.040 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.050 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.063 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.072 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.080 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.090 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.100 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.110 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-.125 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
| 127-0.032 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.036 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.040 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.050 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-0.063 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127-0.071 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-0.080 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-0.090 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-0.100 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-0.110 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127-0.125 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127A-.032 | BOEING STANDARD, 737/747 PT6 51-00-00 | 1 | |
| 127A-.036 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.036/2024 | Boeing reference standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127A-.040 | BOEING STANDARD, 737/747 PT6 51-00-00 | 1 | |
| 127A-.050 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.063 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.072 | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. | 1 | |
| 127A-.072/2024 T3 CALD | Boeing reference standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 127A-.080 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.090 | BOEING STANDARD, 737/747 PT6 51-00-00 | 1 | |
| 127A-.100 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.110 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
| 127A-.125 | BOEING STANDARD, 737/747 PT6 51-00-00 | 1 | |
| 127A-032 | Boeing reference standard | 1 | |
| 1281.00 | Boeing B757 TAIL JACK | 1 | |
| 1281.30 | Boeing B777 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1281.40 | Boeing B767 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1281.70 | Boeing B777 NOSE JACK | 1 | |
| 1281.90 | BOEING B777 NOSE JACK | 2 | |
| 1284.00 | Boeing B767 NOSE JACK | 1 | |
| 1285.70 | Boeing B737 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1285.90 | Boeing B757 TAIL JACK | 3 | |
| 1286.00 | Boeing B737 NOSE JACK | 1 | |
| 1288.00 | Boeing B737 WING/MAIN JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1289.00 | Boeing B737 NOSE JACK | 2 | |
| 130-.300 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .300" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 130-.330 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .330" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 130-.335 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .335" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 130-.350 | BOEING GLASS THICKNESS STANDARD TEST BLOCK | 1 | |
| 130-.360 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .360" Nominal | 2 | |
| 130-.370 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .370" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 130-.380 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .380" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 130-.600 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .600" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 130A | BOEING THICKNESS STANDARD FOR X-BAND RADOMES DE | 2 | |
| 130B | BOEING THICKNESS STANDARD FOR C-BAND RADOMES DETAIL V 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. | 2 | |
| 130C | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI (same as NDT706P) | 2 | |
| 134P1 | Boeing Standard, 707 PT4 53-40-07:PG11 FIG2 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 134P2 | Boeing Standard, 707 PT4 53-40-07:PG11 FIG2 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1380.00 | BOEING B737 MLG AXLE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 138P | Boeing Positioner 707 PT4 32-20-07 PG8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1481.00 | Boeing B757 TAIL JACK | 1 | |
| 1481.01 | Boeing B747-8F WING/MAIN JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1481.90 | Boeing B757 NOSE JACK | 1 | |
| 1482.00 | Boeing B787 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1482.90 | Boeing B777 TAIL JACK | 2 | |
| 1484.00 | Boeing B747 NOSE JACK | 1 | |
| 1484.90 | Boeing B757 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1485.00 | Boeing B777 TAIL JACK | 1 | |
| 1485.01 | Boeing B747-8F TAIL JACK | 1 | |
| 1486.00 | Boeing B747 MID WING JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1486.01 | Boeing B747-8F MID WING JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1487.00 | Boeing B747 WING TIP JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1487.01 | Boeing B747-8F WING TIP JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1488.00 | Boeing B757 NOSE JACK | 1 | |
| 1489.00 | Boeing B787 TAIL JACK | 1 | |
| 1489.70 | Boeing B777 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1490.00 | Boeing B767 NOSE JACK | 1 | |
| 1491.00 | Boeing B767 WING TIP JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1492.00 | Boeing B767 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1493.00 | Boeing B767 WING/MAIN JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1494.00 | Boeing (Douglas) MD11 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1496.00 | Boeing B757 TAIL JACK | 1 | |
| 1497.00 | Boeing B787 WING TIP JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 150D1100/-56 | JACK - AXLE, MAIN GEAR (FOR BOEING 737) FLY WAY | 2 | |
| 15318-00 | WINGRIP SOLUTIONS 12M MULTI USERS LIFELINE SYSTEM FOR USE ON BOEING B737 FAMILY AND B787 | 2 | |
| 15F388 | BRAKE CRADLE, BOEING 707, 727, 757 DOUGLAS DC-8 AIRBUS A300/310, A318-A321 | 1 | |
| 15F389 | BRAKE CRADLE, BOEING 737, DC-9 | 1 | |
| 15F679 | BOEING 747, 767, B777, B787, DOUGLAS DC-1, AIRBUS A330, A340 (ALL SERIES) A350, A380 | 1 | |
| 1620.00 | Boeing B737 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1662.00 | Boeing B737 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1690.00 | BOEING B727 MLG AXLE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1691.00 | BOEING B707 NLG AXLE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1851.00 | Boeing B777 TAIL JACK | 1 | |
| 1852.00 | Boeing B787 WING/MAIN JACK | 1 | |
| 1865.00 | Boeing B767 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 186A | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875. Includes Test Report and Certificate of Conformance. | 3 | |
| 186A-F | Boeing Standard, 737/747 PT6 51-00-00:PG6 FIG1 DETAILII, 2 LAYERS/6 HOLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 186ABCDEF | BOEING CUSTOM COMBINATION REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875", .2500", .3125", .3750", .4375", .500. Each hole size marked with the corresponding Boeing Part number 186A-186F Includes Test Report and Certific... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 186B | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.2500. Includes Test Report and Certificate of Conformance. | 3 | |
| 186C | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.3125. Includes Test Report and Certificate of Conformance. | 4 | |
| 186D | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 FIGURES 1&2, PAGES 6-7, HOLE SIZE 0.3750. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| 186E | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .4375 hole dia. | 4 | |
| 186F | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .5000 hole dia. | 3 | |
| 186G | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .563 DIAMETER HOLE | 2 | |
| 186H | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .625 DIAMETER HOLE | 2 | |
| 186J | BOEING STANDARD 737/747 PT6 51-00-00 PROCEDURE 1 PG5 FIG2, .750 DIAMETER HOLE | 2 | |
| 1875.00 | Boeing B777 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1876.00 | Boeing B767 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 188A | BOEING REFERENCE STANDARD PT 651-00-00-1 FIG 6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| 188A-2024T3 | Boeing Standard,737 PT6 51-00-00:PG12 FIG4 DETAIL VI, 2024-T3 Aluminum | 1 | |
| 189A | Boeing Standard 737 51-00-00 Part 6 Figure 4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 194A | BOEING REFERENCE STANDARD 767 PT 6 53-30-02 FIG 3 PAGE 5. Includes Test Report and Certificate of Conformance. | 4 | |
| 194A-.312/.375 | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, 5/16 and 3/8 holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 194LH | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, .072" plates | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2006 | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K19). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 204-94034-1 | Boeing Reference Standard- Lower Lug APE-1 Primary , D204-12769-6 ASIP Inspection Program. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 251A | Boeing Standard, 727 PT4 57-30-27:PG4 FIG1 SHEET4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-200-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/4" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-201-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/8" )( Cupping Size: 9/32" ) | 1 | |
| 26-202-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-202-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-202-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-202-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-202-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-202-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-202-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 1/2" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-203-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 5/8" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-204-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .187" Shank ( Shank Size: .187" Shank )( Body Length: 3/4" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-220-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-220-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-220-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-220-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 3/16" ) | 1 | |
| 26-220-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-220-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-220-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/4" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-221-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/8" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-222-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 1/2" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-223-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 5/8" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4703BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4704BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4705BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4706BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4707BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 7/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4708BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26-224-4709BAC | Cupped Squeezer Sets For BOEING® BACR15FT Type .250" Shank ( Shank Size: .250" Shank )( Body Length: 3/4" )( Cupping Size: 9/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2608811-5 | WHEEL: MAIN, BOEING: | 1 | |
| 262A | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig 11 Sheet 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 293W2604-3 | THE BOEINGCOMPANY, NOSE GEAR DOOR OPERATED SEQUENCE VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 293W3922-3 | THE BOEINGCOMPANY, ACTUATOR ASSEMBLY – MLG DOOR UPLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 295W1304-1 | THE BOEINGCOMPANY, NOSE GEAR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 295W1403-1 | THE BOEINGCOMPANY, GEAR UP CENTERING,NOSE GEAR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 295W1701-2 | THE BOEING COMPANY, ASSY, NOSE GEAR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6613G01 | BOEING REFERENCE IS SPL6489 | 10 | |
| 2MIT65 | BOEING WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65-27535 | BOEING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3-1251 | NOSE WHEEL BEAD SEAT WHEELL PROBE FOR BOEING 707 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 301 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 301317-000 | TWIN PLUGS AIRMAN 850 BOEING | 3 | |
| 302 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 310/03 | 3MM BOEING APPROVED REVOLUTION SCRAPER | 1 | |
| 310/14 | 14MM BOEING APPROVED REVOLUTION SCRAPER | 1 | |
| 310/25 | 25MM BOEING APPROVED REVOLUTION SCRAPER | 1 | |
| 310/37 | 37MM BOEING APPROVED REVOLUTION SCRAPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 313A/313B | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 7 FIGURE 3. 2024-T3 ALUMINUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 317P | Boeing Standard, 737 PT6 53-10-16:PG6 FIG3 | 1 | |
| 3230 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 1 | |
| 3233 | REFERENCE BLOCK (BOEING BONDED STANDARD 737) | 4 | |
| 323A | BOEING REFERENCE STANDARD 737 PART 4 55-50-01 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 323B | Boeing Standard, 737 PT4 55-50-01:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 323P | BOEING ULTRASONIC TRANSDUCER SHOE 737 PART 4 53-10-38 FIGURE 3 PAGE 7. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 328A | BOEING REFERENCE STANDARD 737 PT 6 53-10-38 | 1 | |
| 328A/328B | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 2 PAGE 7. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 328AB | Boeing Reference Standard 737 PT6 53-10-38 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 328B | Boeing Reference standard, 737, pt 6 53-10-38 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 328C/328D | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 3 PAGE 8. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 328CD | Boeing Reference Standard, 737 pt 6 53-10-38 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 328D | Boeing Reference Standard, PT6 53-10-38 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 334010SAS-125-4 | Static Test Adapter - Boeing 717 | 2 | |
| 33410FFAB-125-4 | Static Test Adaptor - Boeing 787 | 7 | |
| 33410LH-125-4 | Static Test Adaptor - Boeing Aircraft | 20 | |
| 33410LH125-4 | BARFIELD 33410LH125-4 STATIC TEST ADAPTER, FOR BOEING AIRCRAFT | 20 | |
| 33410M-125-4 | STATIC TEST ADAPTOR - BOEING 727 - 100 | 9 | |
| 33410SAS-125-4 | Static Test Adaptor - Boeing 717 | 2 | |
| 336A | Boeing Standard, 737 PT6 57-30-02: PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 336B | Boeing Standard, 737 PT6 57-30-02: PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 338A | Boeing Standard, 737 PT6 53-10-35:PG6 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 338B | Boeing Standard, 737 PT6 53-10-35:PG6 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 350P | BOEING POISTIONING FIXTURE 737 PT 4 32-20-01 | 1 | |
| 351A | BOEING STANDARD, 737 PT6 53-10-01:PG6 FIG2 | 1 | |
| 351B | BOEING REFERENCE STANDARD 737 PT 6 53-10-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 353ABC | Boeing Standard, 737 PT6 53-10-12:PG7 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 353D | BOEING REFERENCE STANDARD 737 PT 6 53-10-12 | 2 | |
| 354A | BOEING STANDARD, 737 PT6 57-30-04: PG4 FIG1 SHT1 - | 4 | |
| 354B | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .400/.600 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 354C | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .322/.700 | 1 | |
| 355A | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .322/.600 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 355B | Boeing Standard, 737 PT6 57-30-04: PG4 FIG1 SHT1 - .300/.600 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 355C | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 | 1 | |
| 365G | BOEING TRANSDUCER GUIDE 737 PART 4 71-20-01 PG.4 FIGURE 1 DETAIL II. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 370-.036/.036 | BOEING STANDARD, 737 PT4 53-30-02:PG5 FIG1, .036 TOP AND BOTTOM SHEET | 1 | |
| 378:383 | Boeing Standard, 737 PT6 53-30-04:PG10 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4004 | Boeing Standard, 747 PT4 53-40-01:FIG6 PG10 | 4 | |
| 4028 | Boeing Standard, 747 PT4 57-40-03:PG6 FIG3 | 4 | |
| 4028G | BOEING TRANSDUCER GUIDE 747 57-40-03 FIGURE 2 PAGE 5. MATERIAL: LUCITE. Includes Certificate of Conformance. | 1 | |
| 4028P | BOEING 747 POSITIONER FOR 4028 PT4 57-40-03 PG 4A FG 1 | 1 | |
| 4029 | BOEING REFERENCE STANDARD 747 PART 4 55-50-01 FIGURE 1 PAGE 4.MATERIAL: 2024-T3 or 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4036 | BOEING REFERENCE STANDARD 747 PART 4 57-40-05 FIGURE 3 PAGE 6.MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | 7 | |
| 4057 | Boeing Standard, 747 PT6 53-30-02:PG4 FIG1 | 2 | |
| 4059 | Boeing Standard, 747 PT6 57-10-12: FIG1 PG5 | 2 | |
| 4065 | Boeing Standard 747 53-30-08 PT 6 PG 7 | 1 | |
| 4066 | BOEING STANDARD, 707 PT6 53-30-07 FIG8 PG67 SHEET5 | 1 | |
| 4068 | Boeing Standard 747 53-30-09 PT6 PG3 | 1 | |
| 4070 | Boeing Standard, 747 PT6 53-30-07:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4072 | BOEING REFERENCE STANDARD 747 PT 6 53-30-05. Material 2024-T3 Aluminum. Fasteners BACR15CE5D5, BACR15CE6D5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4074 | Boeing Standard, 747 PT4 54-40-02:PG17 FIG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4075 | Boeing Standard, 747 PT4 54-40-02:PG18 FIG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4084 | Boeing Standard, 747 PT4 54-40-02:PG19 FIG6 | 1 | |
| 4356 | NEW TYRE BOEING TOW BAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8842 | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | 4 | |
| 8970 | 40 TON UNIVERSAL TRIPOD JACK - WING FOR AIRBUS A320/BOEING 737 | 1 | |
| 8971 | 11 TON UNIVERSAL TRIPOD JACK - FOR AIRBUS A320/A321NEO/BOEING 737 | 3 | |
| 31305 | BOEING SPANNER | 2 | |
| 77114 | BOEING JAM NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 83707 | FLUSH CART - ENGINE IDG COOLING SYSTEM, PER BOEING SPEC. DRAWING A71040 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 281009 | BOEING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 636163 | BOEING FISH POLE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001061 | DC9/MD80 & Boeing 717 head to insert into 2001056 multi-towbar. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001062 | BOEING TOWBAR HEAD | 1 | |
| 2001065 | Boeing 727 & 707 (KC-135 & E-3) towbar with hydraulic lift and pneumatic tires | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001071 | B727 & A300/310 Aluminum Towbar. Handles Boeing 727 and Airbus A300/310 airframes (also fits American Airlines 757 A /C.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001463 | CH-46 towbar head for the Boeing Vertol CH-46 Sea Knight also known as the BV 107-II. Designed with w/radial & linear shear to protect easily damaged nose wheel outer flange and gear. Compatible towbar(s): TB1, TB2.5 (TB125 & TB3 with Reducer).Shipping Di | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2021924 | Boeing 727 & 707 (KC-135 & E-3) towbar with hydraulic lift and pneumatic tires - EN (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2021930 | B727 & A300/310 Aluminum Towbar - EN (CE). Handles Boeing 727 and Airbus A300/310 airframes (also fits American Airlines 757 A /C.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4036G | BOEING STANDARD, 747 PT4 57-40-05:PG4 FIG2 | 1 | |
| 403A | Boeing Standard, 747 PT 4 57-10-04: PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 403A/403B | BOEING REFERENCE STANDARD 747 PT 4 57-10-04 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 403B | Boeing Standard, 747 PT 4 57-10-04: PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4062A | BOEING STANDARD, 747 PT 6 57-10-23: PG4 FIG1 | 2 | |
| 4062B | Boeing Standard, 747 PT 6 57-10-23: PG4 FIG1 | 1 | |
| 4062C | BOEING STANDARD, 747 PT 6 57-10-23: PG4 FIG1 | 1 | |
| 42/440 | BOEING HOIST KIT APU/BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 42/449 | BOEING 757/767/777 APU KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 42/459 | BOEING 747 APU KIT (ND) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429EB | 429 TX/RX DATABUS ANALYZER/WITH BOEING LABEL | 1 | |
| 429EBP | 429EBP, 429 TX/RX DATABUS ANALYZER WITH BOEING LABELS/PRINTER PORT | 6 | |
| 485A | Boeing Standard 747 PT6 53-10-23 FG 3 PG 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 485B | Boeing Standard 747 PT6 53-10-23 FG 3 PG 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4916807 | ANTI-SKID TRANSDUCER SPINNERTHE BOEING COMPANY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 497C | BOEING PLEXIGLASS OPTICAL CENTER 767 PT 6 53-00-04 FIG 4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 497G | BOEING PLEXIGLASS PROBE HOLDER GUIDE 767 PT 6 53-00-04 FIG 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 497P | BOEING PLEXIGLASS PROBE HOLDER 767 PT 6 53-00-04 FIG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4MIT65B80307-1 | PROTRACTOR ASSY - CONTROL COLUMN (EQUIVALENT TO A27021-30 PROTRACTOR (QTY 2 A27021-30 IN A27021-29 KIT)) (THE BOEING COMPANY) | 32 | |
| 4PRE50-7945 | BARRIER, SAFETY - ENTRY AND GALLEY DOOR (THE BOEING COMPANY) | 3 | |
| 5007-56F | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5007-56FT | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | 3 | |
| 50P9AR | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | 5 | |
| 511CA29 | AIRCRAFT DOOR BARRIER NET, FWD ENTRY DOOR, BOEING 737 | 1 | |
| 512CA29 | AIRCRAFT DOOR BARRIER NET, FWD SERVICE DOOR, AFT SERVICE DOOR, AFT ENTRY DOOR, BOEING 737 | 1 | |
| 57-54-103C | CUSTOM BOEING REFERENCE STANDARD 7075-T6 ALUMINUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 604A | BOEING REFERENCE STANDARD 767 PT 6 53-60-01 FIG 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 604B | BOEING REFERENCE STANDARD 767 PT 6 53-60-01 FIG 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 605A | BOEING REFERENCE STANDARD 767 PT 6 22-10-01 | 1 | |
| 64300-200 | HEADSET AIRMAN 750 BOEING | 21 | |
| 65B01464-55 | LH WLG (BOEING 474-200) CONDITION OH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65B01464-56 | RH BLG (BOEING 474-200) CONDITION OH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65B01466-31 | LH BLG (BOEING 474-200) CONDITION OH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65B01466-32 | RH WLG (BOEING 474-200) CONDITION OH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65B05528-1 | BOEING-FLIGHT CONTROL BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65B1465-24 | NOSE LG CONDITION OH (BOEING 474-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65P10 | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | 5 | |
| 65–81149–L | BOEING TOOL NO. ST2109-10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6MIT65-10684 | BOEING 6MIT65 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 715-1 | PRESSURE HOSE - MAIN WHEEL AXLE JACK - BOEING | 1 | |
| 717RS1 | Boeing Standard, 717-200 SECTION2-1 FIG1, 4340 Normalized | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RS15 | Boeing Standard, 717-200 SECTION2-1 FIG1.4 PG 1-4, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RS4 | Boeing Standard, 717-200 SECTION2-1 FIG1.17 PG 1-4, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RS7 | Boeing Standard, 717-200 SECTION2-1 FIG1.22 PG 1-7 *APPLY SEALANT* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RS8 | Boeing Standard, 717-200 SECTION2-1 FIG1.23 PG 1-6 *APPLY SEALANT* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RS9 | Boeing Standard, 717-200 SECTION2-1 FIG1.24 PG 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RST5 | Boeing Standard, 717-200 SECTION2-1 FIG1.18 PG 1-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 717RST6 | Boeing Standard, 717-200 SECTION2-1 FIG1.19 PG 1-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 737NG TYP STRINGER | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 737NG TYP STRINGER RE-WORK | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-1 | Boeing Standard Previously 787-9-HS 55-10-10 55-10-05/06 R | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-10 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-11 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-12 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-13 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-14 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-2 | Boeing Standard previously 787-9-HS 55-10-10 PFWEB PF UPR&LWR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-3 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-4 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-5 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-6 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-7 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-8 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-9-HS-9 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-EC57-54-08 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-EC57-70-01A | Boeing 787 Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-F1-ET-14 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-1 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-10 | Boeing Std | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-14 | Boeing standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-15 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-16 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-16:787-FT-ET-2 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-20 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-21 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-22 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-24 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-25 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-26A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-26B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-26C | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-3 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-4 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-7 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-7A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-7B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-7C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-7D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-ET-9 | Boeing Std | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-10 53-17-03-4a-15 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-11 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-12 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-12-Ti | Boeing Standard Titanium | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-13 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-14 | BOEING METAL REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-16 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-17 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-6 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-8 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-9 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-9A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-9B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 787-FT-UT-9C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80031-1 | Boeing 757/767 MCDP Diagnostics Cable, 10 Ft. | 1 | |
| 80046-2 | CFM 56 (Boeing) FADEC Cable (8') with USB, Ethernet and Power Breakouts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80046-3 | CFM 56 (Boeing) FADEC Cable (25') with Power Breakout and TIP Serial Ports | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80072-4 | PMAT 2000 to Boeing EFB Loading Cable | 5 | |
| 80072‐4 | CABLE, BOEING EFB WITH USB, POWER (10') | 5 | |
| 80089-1 | PMAT 2000 to Boeing 777 AIMS II interface cable | 1 | |
| 802-0159 | BOEING B737NG, B757, B767 REALTIME PTI CABLE KIT | 1 | |
| 802-0163 | Boeing B717 Realtime PTI Cable Kit | 1 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80RS25 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 7075-T6511, -7 DETAIL ALUMINUM 7075-T73. FASTENERS: S4932869-6-6 (8 EA. ), S4932869-8-6 (12 EA. ), S4932869-8-7 (16 EA. ). COLLARS: NAS 1080-06 (8 EA... | 1 | |
| 856A3557G01 | TOOL D - SEAL - ** DELETED FROM BOEING L | 22 | |
| 8774B | BOEING 737 SHOCK STRUT SERVICING CART FOR NLG AND MLG | 2 | |
| 8970/897000 | 40 TON UNIVERSAL TRIPOD JACK - WING FOR AIRBUS A320/BOEING 737 | 1 | |
| 8971/897100 | 11 TON UNIVERSAL TRIPOD JACK - FOR AIRBUS A320/A321NEO/BOEING 737 | 1 | |
| 906-10246-1 | BOEING LOOP RESISTANCE TESTER | 4 | |
| 906-10246-2 | BOEING LOOP RESISTANCE TESTER | 2 | |
| 906-10246-3 | BOEING LOOP RESISTANCE TESTER | 17 | |
| 906-10271-3 | BOEING LOOP RESISTANCE ACCESSORY TESTER KIT | 4 | |
| 91/32 | BOEING 747 APU KIT | 1 | |
| 91/676 | BOEING 787 APU HOIST KIT | 2 | |
| 94-8136 | SUMP DRAIN TOOL BOEING 737/777 | 18 | |
| 95605718 | MAIN WHEEL BEAD SEAT WHEELL PROBE FOR BOEING 707 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 964-0453-011 | HF COUPLER, BOEING & MD-11 | 6 | |
| 9829-0012 | FLUSH CART - ENGINE IDG COOLING SYSTEM, PER BOEING SPEC. DRAWING A71040 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 99961-001 | ENGINE CHANGE BEAM FOR OUR BOEING 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9MIT65-6088 | TOOL BOEING 737 SB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A003813D | TOWBAR, CUSTOM BOEING 757 | 3 | |
| A003819D | TOWBAR, CUSTOM BOEING 737 | 4 | |
| A003830D | CUSTOM BOEING 747 TOWBAR | 2 | |
| A085 | Boeing Standard, 707 PT6 53-30-07 FIG3: PG11 FIG3 SHEET6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A09003-2 | LOCK PIN TOWING (THE BOEING COMPANY) | 33 | |
| A09003-2 | BOEING NLG/STEERING PIN | 33 | |
| A12007-23 | BOEING TIRE INFLATION ADAPTOR | 9 | |
| A161 | Boeing Standard, 707 PT6 53-10-07 FIG2: PG6 SHEET3, BACR15CE6D6C Alodine Rivet only | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A181 | Boeing Standard, 707 PT6 55-10-07:FIG1 SHEET5 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A20001-65-REVJ | BOEING GSE | 1 | |
| A20001-83-REVJ | BOEING GSE | 1 | |
| A20005-9 | CABLE CLAMP/BOEING | 19 | |
| A20006-32 | INSTALLATION SET FOR NAS1368 GROMMETS (THE BOEING COMPANY) | 12 | |
| A201 | Boeing Standard, 727 PT6 55-10-27:PG16 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A25020-8 | GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW (THE BOEING COMPANY) | 25 | |
| A256 | Boeing Standard..727 PART6 53-10-27 PAGE 393..FIG 40 Sheet 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A257 | Boeing Standard..727 PART6 53-10-27 PAGE 394..FIG 40 Sheet 6 | 3 | |
| A258 | Boeing Standard..727 PART6 53-10-27 PAGE 395..FIG 40 Sheet 7 | 1 | |
| A259 | Boeing Standard..727 PART6 53-10-27 PAGE 396..FIG 40 Sheet 8 | 5 | |
| A260 | Boeing Standard..727 PART6 53-10-27 PAGE 396..FIG 40 Sheet 8 | 1 | |
| A26001-191 | BOEING TEST SET - ELECTRICAL TEST EQUIPMENT BOTTLE SQUIB, FIRE EXTINGUISHING) | 8 | |
| A26007-1 | PLUG EQUIPMENT – DISCHARGE NOZZLE. FOR BOEING 767 | 6 | |
| A265ABC | Boeing Standard..727 PART6 52-30-27 PAGE 28, FIG 4 Sheet 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A265DE | Boeing Standard..727 PART6 52-30-27 PAGE 29, FIG 4 Sheet 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A266 | BOEING REFERENCE STANDARD 727 PT 6 57-50-27 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021-29 | ADAPTER EQUIPMENT - CONTROL WHEEL (CONTAINS 2 EA -30 PROTRACTORS) ONE -30 IS FUNCTIONALLY IDENTICAL TO A 4MIT65B80307-1 (THE BOEING COMPANY) | 16 | |
| A27092-84 | ACTUATOR/DEACTUATOR SET - PROXIMITY SENSORS. (THE BOEING COMPANY) | 10 | |
| A27288 | BOEING REFERENCE STANDARD DC9-27A307 | 3 | |
| A28003-44 | EQUIPMENT - VENTILATION, FUEL TANK (THE BOEING COMPANY) | 3 | |
| A28005-48 | ADAPTER - DRAIN MAST (737) (THE BOEING COMPANY) | 20 | |
| A28005-50 | HOSE - TEST, LEAK, APU FUEL LINE SHROUD (THE BOEING COMPANY) | 17 | |
| A305 | BOEING REFERENCE STANDARD PART 6 57-30-03 PG. 3 FI | 1 | |
| A306 | BOEING REFERENCE STANDARD 737 PART 6 57-10-07 FIGURE 1 PAGE 4. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A31007-59 | CABLE - ADAPTER, TELEDYNE TESTER. USE WITH TELEDYNE DFDAU TESTER. (THE BOEING COMPANY) | 16 | |
| A32011-1 | BOEINGTOOL | 13 | |
| A32017-1 | BOEING TOOL | 16 | |
| A32017-2 | BOEING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32030-18 | PIN,SAFETY,FOR MAIN LANDING GEAR DOOR,BOEING 767 | 13 | |
| A32075-10 | ADAPTER - SPIN UP, WHEEL SPEED TRANSDUCER, ANTI-SKID SYSTEM (THE BOEING COMPANY) | 21 | |
| A34001-4-REVA | BOEING GSE | 1 | |
| A34016-35 | BOX - BREAKOUT, ARINC 600. PART #: A34016-XX SUPPLIER: 81205 (THE BOEING COMPANY ) | 5 | |
| A352 | BOEING REFERENCE STANDARD 737 PART 6 53-10-04 PAGE 4 FIGURE 1. 2024-T3 CLAD ALUMINUM OR 7075-T6 BARE. Includes Test Report and Certificate of Conformance. | 11 | |
| A376 | BOEING STANDARD, 737 PT6 53-10-45: PG15 FIG10 | 1 | |
| A38001-22 | PLUGS - VENT, VACUUM WASTE SYSTEM (THE BOEING COMPANY) | 21 | |
| A38003-20 | REMOVER - BLOCKAGE, VACUUM TOILET (THE BOEING COMPANY) | 19 | |
| A38007-1 | PLUG - VACUUM WASTE SYSTEM (THE BOEING COMPANY) | 11 | |
| A38007-9 | PLUG - VACUUM WASTE SYSTEM (THE BOEING COMPANY) | 11 | |
| A38009-11 | CLEANER - SENSORS, LAVATORY WASTE TANK SENSOR (APPLICABLE TO VEE CLAMP MOUNTED SENSORS; 767 L/N 284 AND ON) (THE BOEING COMPANY) | 14 | |
| A38010-11 | CABLE - TEST, POTABLE WATER QUANTITY TRANSMITTER (THE BOEING COMPANY) | 9 | |
| A38012-18 | PUMP EQPT - VACUUM LAV SYSTEM (RECIRCULATING SYSTEM) (THE BOEING COMPANY) | 4 | |
| A38012-39 | PUMP EQPT - VACUUM LAV SYSTEM (RECIRCULATING SYSTEM) (THE BOEING COMPANY) | 11 | |
| A386 | BOEING REFERENCE STANDARD 737 PT 6 53-10-45 | 1 | |
| A389A | BOEING REFERENCE STANDARD 737 PT 6 53-10-41 FIG 3. Includes Test Report and Certificate of Conformance. | 3 | |
| A389B | Boeing Standard, 737 PT6 53-10-41:PG13 FIG3 | 2 | |
| A389C | BOEING REFERENCE STANDARD 737 PT 6 53-10-41 FIG 3. | 2 | |
| A4010 | BOEING REFERENCE STANDARD PT 6 53-10-33 FIG 2, PAGE8. Includes Test Report and Certificate of Conformance. | 1 | |
| A4024 | BOEING STANDARD 747 53-10-33 PT6 PG 8 | 1 | |
| A428 | BOEING STANDARD 747 53-10-15 PT6 PG9 | 1 | |
| A429 | BOEING REFERENCE STANDARD PT 6 53-10-15 FIG 2, PAGE11. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A430 | BOEING REFERENCE STANDARD PT 6 53-10-15 FIG 2, PAGE11. Includes Test Report and Certificate of Conformance. | 2 | |
| A459 | Boeing Standard 747 30-10-13 PT6 PG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A49002-2 | LIFTING EYE - IDG, APU GENERATOR AND STARTER (THE BOEING COMPANY) | 16 | |
| A52031-1 | RIGGING EQPT - MAIN DECK CARGO DOOR, BOEING | 4 | |
| A55001-47U | BOEING DET TEMPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A607 | BOEING REFERENCE STA | 4 | |
| A607A | BOEING REFERENCE STANDARD 767 PT6 53-80-02 | 3 | |
| A78003 | CRADLE − TURBINE EXHAUST SLEEVE (THE BOEING CO.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78003-41 | CRADLE − TURBINE EXHAUST SLEEVE (THE BOEING CO.) | 8 | |
| A78019-21 | PUMP THRUST REVERSER (THE BOEING COMPANY) | 3 | |
| AA-400-128-MK3-EL-KIT-120 | BOEING HEAT GUN | 2 | |
| AA400 | BOEING HEAT GUN | 2 | |
| AD953-7 | Air Data Accessory - Boeing 737 Classic - 100, 200, 300, 400 & 500 | 14 | |
| AD967-47M | AIR DATA ACCESSORY - BOEING 747-400 | 3 | |
| ADA717-612 | Air Data Accessory - Boeing 717 | 2 | |
| ADA737-678 | AIR DATA ACCESSORY - BOEING 737 - 600, 700, 800 & 900 NG & BBJ | 14 | |
| ADA757-612 | Air Data Accessories kit for BOEING 757 | 8 | |
| ADA767-612 | AIR DATA ACCESSORY - BOEING 767 | 4 | |
| ADA767HT-612 | AIR DATA ACCESSORY - BOEING 767 | 5 | |
| ADA777-612 | Air Data Accessory - Boeing 777 | 4 | |
| ADA787-612 | AIR DATA ACCESSORY - BOEING 787 | 4 | |
| ADA927-180 | Air Data Accessory - Boeing 727 - 200 | 2 | |
| ADA967-47 | NavAids Ltd Air Data Accessory Kit for BOEING 747100, 200 & 300 | 2 | |
| AF-5036G1 | PROBE GUIDE Material: Delrin. Diameter 0.430 ±0.025 (10.92mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AF-5036G2 | PROBE GUIDE Material: Delrin. Diameter 0.515 ±0.025 (13.08mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AF-5098RS/.875 | BOEING DC9 REFERENCE STANDARD -57-225 FIG 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AF-5257G | PROBE GUIDE Material: Lucite. Diameter 1.50" ±0.02 . Used in Boeing procedure 55-10-27 Part 6. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AF125-4801-DEV | Custom Boeing Reference Standard. Material: ST Aeromet 100. Quantity of 1 (A) .030" x .030" and 1 (B) .050" x .050" corner EDM notch. Reference standard must be fabricated using round bar since Aeromet 100 is only commercially available in this form.... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-0510 | 10MHZ .250" HARDWIRED STRAIGHT BEAM TRANSDUCER WITH BNC CONNECTOR. BOEING 767 PT 4 57-50-07 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-2 | Crimp Tool with K1168 Positioner for Boeing Twinax Contacts | 1 | |
| AFNDT-1010-177SS | BOEING TOOL ST8809C LETTER CODE D 17-7 PH ANNEALED STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-1010-ALNIBR | BOEING TOOL ST8809C LETTER CODE F Al-NI-BR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-1010A | BOEING TOOL ST8809C LETTER CODE B 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-1010S | BOEING TOOL ST8809C LETTER CODE E 4340 STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-1010SA | BOEING TOOL ST8809C LETTER CODE A 7075-T73 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-1010TI | BOEING TOOL ST8809C LETTER CODE C 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2013AL | 12 HOLE REFERENCE STANDARD 7075-T6 (3/16" x 2), 13/64", 7/32", 15/64" ,(1/4" x 2 ), 17/64",9/32", 19/64",5/16", 21/64" .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3. Includes Te | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2054AL | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .156",.250",.312",.375",.437",.500". CORNER E... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2054AL-1 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .156",.250",.312",.375",.437",.500". CORNER E... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2054AL-2 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125" .156", .187", .250",.375",.500". CORNER... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2054CS-1 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156",.250",.312",.375",.437",.500". CORN... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2054CS-2 | CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .125", .156", .187" ,.250",.375", .500". ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2069/Ti | Custom Bolt Hole Standard 6Al-4v Titanium. Contains 12 hole sizes; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch diameters.( .050" x .050" +/- .005" x .005"W +0.000" / -0.002" Corner EDM Notch. Per Boeing Specification 77... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2071 | BOEING REFERENCE STANDARD 767 PT 4 51-00-04. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2126 | BOEING DC-9/MD80 3-2 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3012AL | 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3038 | CUSTOM BOND LINE STANDARD. 3.0" x 6.0" LONG, 2024-T351 ALUMINUM. BOEING BMS 5-101 ADHESIVE. QUANTITY OF 2 0.5" x 0.5" DISBOND VOIDS. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3128AL | BOEING ALL AIRCRAFT MODELS 51-00-16 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .020 x .020 X .005" +/-0.002 wide on one side and .030 x .030 .005" +/-0.002 wi... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3129CS | BOEING ALL AIRCRAFT MODELS 51-00-17 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .030 x .030 .005" +/-0.002. MATERIAL: 4340 STEEL. Includes Test Report Traceab... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3130TI | BOEING ALL AIRCRAFT MODELS 51-00-14 PT 6 FIG 3. MULTIHOLE STANDARD WITH 11 HOLES SIZES: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.00". EDM NOTCHES: .050 x .050(+/-.005") x .005" (+0.00/-.002). MATERIAL: 6AL-4V TITANIUM. Includ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3133 | CUSTOM 100° COUNTERSINK BOLT HOLE STANDARD MAUNUFACTURED TO BOEING PART NUMBER 194A, 737 PART 6 53-30-00. MATERIAL: 2024-T3 CLAD ALUMINUM. HOLE SIZES: 2 HOLES 8.6mmØ. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3137AL | 14 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole Per Boeing B737 PT 6 51-00-00 Prodedure 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3139AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3139CS | 11 HOLE REFERENCE STANDARD in 4130 Carbon Steel; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16,5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3139TI | 11 HOLE REFERENCE STANDARD in 6AL-4V Titanium; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3140AL | 7 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 FIG 3, 14 Notches Tota... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3197AL | BOEING REFERENCE STANDARD 737 PT 6 51-00-00 FIGURE 3 PG.9 & 777 PT 6 51-00-02 PAGE 7-8. HOLE SIZES: 1.000", 1.250" . Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3215AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 5/32", 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" a... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3217AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 29 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3218AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3219AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6... | 1 | |
| AFNDT-3220ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/64, ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3221ST | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 52/64... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3222TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" + 0.000 / - 0.002" HOLE SIZES:9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64, 20/64, 21/64, 22/64, 23/64, 24/... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3223TI | CUSTOM HOLE STANDARD IN 6AL-4V TITANIUM PER BOEING PART NUMBER NDT1027. EDM CORNER NOTCH SIZES: .050" x .050" x .005" +0.000 / - 0.002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/64, 48/64, 49/64, 50/64, 51/64, 5... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3229AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" and 0.02... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3235 | BOEING REFERENCE STANDARD PT 6 32-11-11. 4340M. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3264 | Custom Reference Standard for the Boeing Lead Screw inspection, equivalent to 7903385. Material: 4150 Alloy Steel, 1.5 Outside Diameter and 1.069" Inside Diameter with 3 EDM Flaws per BSS 7048 page 2 Table 1. Includes Test Report and Certificate of Confor | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3286 | 12 HOLE REFERENCE STANDARD 7075-T6 (Hole Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1.0", 1-1/8",) .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3292AL | CUSTOM 20 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .(1/8", 5/32",3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8",13/32" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3295 | CUSTOM HOLE STANDARD IN 4340 OR 4340M STEEL PER BOEING PART NUMBER NDT1083 PART 6 51-00-00 PROCEDURE 19. EDM CORNER NOTCH SIZES: .030" x .030" x .005" +/- .002". 13 HOLE SIZES: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3320AL | 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3321AL | 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3329ST | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3329TI | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3390AL | CUSTOM 10 HOLE FLAT BOTTOM REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .218", .250", 312", .375" .437" .500",.562", .625", | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3391AL | CUSTOM 10 HOLE FLAT BOTTOM HOLE REFERENCE STANDARD ASSEMBLY PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .875", 1.00", 1.125", 1.250" 1.375", 1.500", | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3405AL | CUSTOM 15 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3456AL | CUSTOM 19 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00 Procedure16 Figure 3 , 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Total of 19 Hole Sizes: .128", .159", .189", .2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3496-CS | UT REFERANCE BOEINGLOCK | 1 | |
| AFNDT-3496-TI | UT REFERANCE BOEINGLOCK | 1 | |
| AFNDT-CFRP20-4 | Custom 20 ply 12" x 12" CFRP Test Panel with 4 random defects(grafoil delaminations) between the ply layup in random locations. Autoclave cured per Boeing Specification BAC 5317. Includes C-Scan image to identify defects and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT1016-12S-2024 | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 _X000D_ 51-00-02 PROCEDURE 1. HOLE SIZES: .188", .219", .250",.282", 313", .344", .375" .438" .500", | 1 | |
| AFNDT1016-12S-7075 | CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188", .219", .250",.282", 313", .344", .375" .438" .500",.563", .6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-0519 | CUSTOM BOEING ANGLE BEAM TRANSDUCER, 50°, 5MHz, .187" x.187" ELEMENT WITH TOP MOUNTED MICRODOT CONNECTOR. .550" x .26" x .450" USED WITH NDT596 . Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0581 | CUSTOM BOEING 747 TRANSDUCER 39° IN STEEL WITH A 2.0" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4276.Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-0584 | CUSTOM BOEING 747 TRANSDUCER 35° IN STEEL WITH A 2.220" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4279. Includes Test Report and Certificate of Conformance. Reference: 747 Part 4 57-40-08 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-0591 | CUSTOM BOEING 747 TRANSDUCER 33° IN STEEL WITH A 2.220" RADIUS FINGERTIP RADIUS GRIP ON TOP SURFACE, USED WITH NDT4280. Includes Test Report and Certificate of Conformance. Reference: 747 Part 4 57-40-08 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1010L | CUSTOM 5MHz SHEAR WAVE(LEFT) TRANSDUCER FOR NDT567, BOEING 757 PT 4 54-50-02 PAGES 1-10. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1010R | CUSTOM 5MHz SHEAR WAVE(RIGHTT) TRANSDUCER FOR NDT567, BOEING 757 PT 4 54-50-02 PAGES 1-10. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1012 | CUSTOM 10MHZ, 73° SHEAR WAVE TRANSDUCER. BOEING 727 UT INSPECTION FOR 57-10-27. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1015 | 10MHZ 70° IN ALUMINUM, TOP MOUNT CONNECTOR MAX LENGTH .315" BOEING 737 PART 4. 52-10-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1036 | CUSTOM 5MHZ 45° SHEAR WAVE TRANSDUCER (TEK-5086) .BOEING 767 UT INSPECTION FOR 57-20-04. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1044 | CUSTOM BOEING TRANSDUCER, 5MHz BACK SHOOTER WITH A 1.600" RADIUS AND A MICRODOT CONNECTOR. BOEING 767 PART 4 71-20-01 USED WITH NDT632. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1078-1L | 31 DEGGREE 5MHz LEFT SCANNING POTTED ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1078-1R | 31 DEGGREE 5MHz POTTED RIGHT SCANNING ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1078-2L | 27 DEGGREE 5MHz POTTED LEFT SCANNING ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1078-2R | 27 DEGGREE 5 MHz POTTED RIGHT SCANNING ANGLE BEAM TRANSDUCER MOUNTED IN A CUSTOM HOUSING 187" DIA ELEMENT TOP MOUNT MICRODOT CONNECTOR. BOEING 777 PART 4. 57-10-04. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1090 | CUSTOM ANGLE BEAM TRANSDUCER 5MHz WITH A 1.260" RADIUS. USED WITH NDT3144 and NDT3145. Boeing NTM 55-10-16 PT4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1091 | CUSTOM ANGLE BEAM TRANSDUCER 5MHz WITH A 1.30"RADIUS. USED WITH NDT3146. Boeing NTM 55-10-16 PT4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1110-70 | CUSTOM 70 DEGREE 5MHz ANGLE BEAM TRANSDUCER. TOP MOUNT MICRODOT CONNECTOR. BBOEING 777 PART 4. 57-20-03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1167 | CUSTOM 767 STRAIGHT BEAM PANCAKE TRANSDUCER BOEING 57-10-19 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1291 | 5MHZ 60° IN ALUMINUM .25" X.187" ELEMENT WITH TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: .350"W x .375"L x .750"H. BOEING 737 PART 4 57-10-13, pg.1 USED WITH NDT3166-06 AND NDT3166-07. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1292 | 5MHz, 60°in Aluminum .25"X.187" ELEMENT SIDE MOUNT .350"W x .375"L x .750"H. REFERENCE: BOEING 737 PART 4 57-10-09, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1293 | CUSTOM BOEING 737 TRANSDUCER, 70° in ALUMINUM, 5MHZ .250" x .187" ELEMENT, TOP MOUNT MICRODOT CONNECTOR, .350"W x .375"L x .750"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1299 | 5MHZ 70° IN ALUMINUM .25" ELEMENT, TOP MOUNT MICRODOT CONNECTOR. CASE DIMENSIONS: .350"W x.375"L x.750"H. BOEING 737 PART 4 57-10-17, pg.2 USED WITH NDT3186 and NDT3187. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" AND "B" | 1 | |
| AFS-1354/60S | 5MHZ 60° IN ALUMINUM .25" ELEMENT, SIDE MOUNT MICRODOT CONNECTOR. CASE DIMENSIONS: .350"W x.375"L x.750"H. BOEING 737 PART 4 Part 4 57-10-09. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1392-T1 | CUSTOM TRANSDUCER 5MHz 30° in ALUMINUM, .187" x .187" ELEMENT CASE SIZE: .900" L x .400" W x .950" H. BOEING 767 PT 4 54-50-07 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1392-T2 | CUSTOM TRANSDUCER 5MHz 30° in ALUMINUM, .187" x .187" ELEMENT CASE SIZE: .900" L x .400" W x .950" H. BOEING 767 PT 4 54-50-07 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5129-T1 | BOEING CUSTOM 5MHz TRANSDUCER WITH RADIUS 1.0 " LONG TAPERED FOR CLEARANCE. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5129-T2 | CUSTOM BOEING TRANSDUCER 5 MHz W/ TAPER FROM FRONT TO BACK FOR CLEARANCE WITH END MOUNT MICRODOT CONNECTOR. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5135 | CUSTOM BOEING L-WAVE TRANSDUCER, 10 MHz 9.4° DEGREES With a 1.93" Radius. Case Size: .600"L x .310" W x .400" H. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-6011P | BOEING 767 TRANSDUCER POSITIONER USED WITH TEK5046-1, TEK5046-2 and NDT6011. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE17077B | TRONAIR AGE17077B BOEING 787 RAM AIR TEST TOOL | 4 | |
| AK737 | AIR DATA ACCESSORY - BOEING 737 CLASSIC - 100, 200 | 2 | |
| AK737-900 | ACCESSORY KIT ADTS 505 BOEING | 2 | |
| AK787 | ADAPTER KIT FOR BOEING 787 | 2 | |
| AL-BOEING REF STD PART6 51-00-0 | AL REF STANDARD FOR BOEING NDT PART 6 51-00-00 PROCEDURE 16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM-1928-900 | BOEING BOOTSTRAP ADA | 1 | |
| AN60-6 | GEC AN60-6 SCALES APPROVED BY BOEING METROLOGY LABS | 1 | |
| ANDT 1015 | REF STD, BOEING EXTERNAL DOUBLER INSPECT | 3 | |
| ANDT 1049 | BOEING STANDARD, 737 PT6 53-30-00 PROCEDURE 5 PG 5 AND 11 FG 1 | 3 | |
| ANDT 1051 | REF STD, BOEING EXTERNAL DOUBLER INSPECT | 4 | |
| ANDT 1053 | BOEING STANDARD, 737 PT6 53-30-00 PROCEDURE 5 PG 5 AND 11 FG 1 | 5 | |
| ANDT 1054 | REF STD, BOEING EXTERNAL DOUBLER INSPECT | 3 | |
| ANDT 1056 | BOEING STANDARD, 737 PT6 53-30-00 PROCEDURE 5 PG 5 AND 11 FG 1 | 4 | |
| ANDT 1057 | REF STD, BOEING EXTERNAL DOUBLER INSPECT | 3 | |
| ANDT-3016-B | BOEING REFERENCE STANDARD | 4 | |
| ANDT-3016B | BOEING REFERENCE STA | 4 | |
| ANDT1015 | BOEING REFERENCE STANDARD 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1028 | Boeing Standard, 707 PT6 53-10-07 FIG18: PG143 SHEET9, ALODINED RIVETS ONLY (end in C) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT1029A | Boeing Standard 707 53-30-07 PT6 PG102 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT1029B | Boeing Standard 707 53-30-07 PT6 PG 103 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT1049 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 AND | 3 | |
| ANDT1049/.036 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5, .036 SKIN. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT1050 | BOEING STANDARD, 737 PT6 53-30-00:PG6 FIG5 DETAIL | 3 | |
| ANDT1051 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN6-2, BACR15CE6D-2, BACR15BB8D-2). Includes Test Report and Certificate of Conformance. | 4 | |
| ANDT1052 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 and 737 51- 00-26. FASTENER (BACB30FN8-2, BACR15CE8D-2, BACR15BB8D-2). Includes Test Report and Certificate of Conformance. | 3 | |
| ANDT1053 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 FASTENER (BACB30FN8-3, BACR15CE8D-3, BACR15BB8D-3). Includes Test Report and Certificate of Conformance. | 5 | |
| ANDT1054 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 AND 737 51- 00-26. FASTENER (BACB30FN8-3, BACR158D-3, BACR15BB8D-3). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ANDT1055 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
| ANDT1056 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 AND 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| ANDT1057 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 AND 737 51- 00-26. FASTENER (BACB30FN8-4, BACR15CE8D-4, BACR15BB8D-4). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ANDT1077 | BOEING REFERENCE STANDARD, 53-30-00 PT 6 FIG 5 AND | 4 | |
| ANDT1079 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 Procedure 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. Includes Test Report and Certificate of Conformance. FASTENER (BACR15BB5AD-4, BACR15BB6AD-4, BACR15BB7AD-4, BACR15BB8AD-4, ALL ALODINE) | 4 | |
| ANDT1080 | BOEING STANDARD,737 PT6 | 2 | |
| ANDT1081 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 PROCEDURE 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. FASTENER (BACR15BB5AD-5, BACR15BB6AD-5, BACR15BB7AD-5, BACR15BB8AD-5, ALL ALODINE). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| ANDT1082 | BOEING REFERENCE STANDARD 737 PT6 53-30-00: PG 7-8 FIG 2 PROCEDURE 7/ 767 PT6 53-00-07: PG 6-7 FIG 2. FASTENERS: (BACR15BB5AD-5, BACR15BB6AD-5, BACR15BB7AD-5, BACR15BB8AD-5, ALL ALODINE). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ANDT2007 | Boeing Standard, PT6 53-10-27 PG456 Fig 48 Sheet8 Detail IV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT3004 | BOEING REFERENCE STANDARD 737 PART 6 53-30-12 PAGE 7 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ANDT3006 | BOEING REFERENCE STANDARD 737 Part 6 53-30-14 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| ANDT3016-B | BOEING REFERENCE STANDARD 737 PT 6 53-10-54 FIG 2 FASTENER (BACB15BB5D-4, ALL ALODINE). INCLUDES CERTIFICATION REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| ANDT3019 | BOEING REFERENCE STANDARD 737 PART 6 53-30-16 PAGE | 3 | |
| ANDT388 | BOEING STANDARD, 737 PT6 53-10-49:PG11 FIG4 | 1 | |
| ANDT390A | Boeing Standard, 737 PT6 53-10-46:PG10 FIG4 | 1 | |
| ANDT390B | Boeing Standard, 737 PT6 53-10-46:PG11 FIG5 | 1 | |
| ANDT4125 | Boeing Standard w/ certs | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT4126 | BOEING REFERENCE STANDARD PT 6 53-30-00 FIGURE 6 P | 2 | |
| ANDT4218 | Boeing Standard 747 53-10-51 PT6 PG6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ANDT4223 | BOEING REFERENCE STANDARD PT 6 53-10-33 FIG 2, PAGE8. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB | AVIATION PARTNERS BOEING 767 PART6 57-20-03: PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT001 | Aviation Partners Boeing 767 Part6 57-20-02: PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT002 | Aviation Partners Boeing 767 Part6 57-20-02: PG9 FIG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT003 | Aviation Partners Boeing 767 Part6 57-20-02: PG9 FIG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT004 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5-6 Figure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT005 | Aviation Partners Boeing 767 Part6 57-20-02: PG13 FIG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT006 | AVIATION PARTNERS BOEING 767 PART6 57-20-03: PG6 FIG2 | 2 | |
| APB-NDT007 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT008 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 1-2 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT009 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 5-6 Figure 6.Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certif | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT010 | BOEING-AVIATION PARTNERS REFERENCE STANDATD 767 Part 6 57-20-09 Page 8-9 Figure 8. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT011A | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8-9 Figure 3. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT011B | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 11-12 Figure 5. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT011C | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 14-15 Figure 7. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT011D | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 17-18 Figure 9. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT012 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 8 Figure 3. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT013 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 10 Figure 4. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT014 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 4 57-20-03 Page 12 Figure 5. Material: 2224-T3 or 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT3301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-34 Page 7-8 Figure 2. Material: 2024-T3 (28.5-32% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT3302 | Aviation Partners Boeing 737 57-20-35 PG 6-8 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT5201 | AVIATION PARTNERS BOEING 757 PT 6 57-20-01 | 2 | |
| APB-NDT5202 | Boeing Standard, 757, 57-20-01, PT6, PG20 | 2 | |
| APB-NDT5203 | Boeing Standard, 757, 57-20-02, PT6, PG7 | 2 | |
| APB-NDT5204 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 11-12 Figure 4. Material: 2224-T3 and 2324-T3 or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5205 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 PT 6 57-20-02 | 2 | |
| APB-NDT5206 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 8-9 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 2 | |
| APB-NDT5207 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 12-13 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5208 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 16-17 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5209 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 4 57-20-03 Page 9 Figure 2. Material: Airplane Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT5302 | Aviation Partners Boeing 757 Figure 4 Stringer 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APB-NDT5303 | Aviation Partners Boeing 757 fig 2 stinger 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ARP-1000 | BOEING SPECIAL RING PROBE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT 492 | BIT - SCREWDRIVER (REF 737-SL-20-20) (BOEING STOCK NO. B3-1380-2790) | 1 | |
| ATI108AP1/8F | CUPPED SQUEEZER SET - BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATI108AP732F | CUPPED SQUEEZER SET - BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATI108AT1/8F | CUPPED SQUEEZER SET - BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATI520CTSB-4 | ADAPTOR BOEING TERM - 1/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATI520CTSB-6 | ADAPTOR BOEING TERM-3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AY969-00668-001 | CABLE, BOEING RA EXTENDER BOX | 8 | |
| B07001-4-REVB | BOEING GSE | 1 | |
| B07001-7 | ADAPTER BOEING 757 NOSE JACK | 13 | |
| B07002-1 | ADAPTER SET BOEING 757 AFT FUSELAG AND WING JACKS | 13 | |
| B1B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B20003-83 | RIGGING PIN SET BOEING. | 4 | |
| B20004-21 | ADAPTER - ACCESS PANEL, LEVERAGE (SCREW REMOVAL) (IDENTICAL TO ST2753) (THE BOEING COMPANY) | 14 | |
| B24001-101 | HOIST - MAIN BATTERY (BOEING 737-300 THRU -500) | 3 | |
| B24001-111 | HOIST - MAIN BATTERY (BOEING 737-300 THRU -500) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B24001-121 | HOIST - MAIN BATTERY (BOEING 737-300 THRU -500) | 9 | |
| B26002-1 | TEST EQPT - DISCHARGE LINES, CARGO FIRE EXTINGUISHER (THE BOEING COMPANY) | 25 | |
| B27019-10 | SLING EQUIPMENT - LEADING EDGE SLAT FOR BOEING 757 FLEET | 12 | |
| B27023-7 | RIGGING BLOCK (DELETED FROM BOEING) | 1 | |
| B27035-46 | BOEING CHANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27064-1 | EQUIPMENT, TORQUE - RUDDER PEDAL ADJUSTMENT (WITH FRH280 FLARE NUT TOOL AND AC34 FLARE NUT WRENCH) (THE BOEING COMPANY) | 12 | |
| B28001-18 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION (THE BOEING COMPANY) | 17 | |
| B28001-2 | ADAPTER - FUEL SUMP DRAIN VALVE (THE BOEING COMPANY) | 12 | |
| B29002-5 | LOCK SET - RESERVOIR VENT VALVE (NOTE: APPLICABLE TO THOSE 737NG'S L/N 1 THRU 1344 THAT HAVE NOT INCORPORATED S/B 737-29 (THE BOEING COMPANY) | 14 | |
| B32025-66 | RING-BOEING 757 MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B52004-1 | INSTALLATION TOOL DOOR SEAL ALL BOEING | 22 | |
| B54001-30 | PUMP THRUST REVERSER (THE BOEING COMPANY) | 8 | |
| B54001-53-REVL | **BOEING GSE | 1 | |
| B71005-53 | TOOL SET FOR BOEING 757 | 8 | |
| B71034-63 | TEST EQUIPMENT -PRESSURE MONITORING, BOEING | 4 | |
| B71040-39 | BOEING INLET COWL SLING | 19 | |
| B71044-28 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH (THE BOEING COMPANY) | 12 | |
| B78001-155 | BOEING DET TEMPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B787-100 | INTAKE COVER, OEM Type, each, Boeing P/N: K10011-2, adjustable straps to bypass attachment detail | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B787-105 | INTAKE COVERS KIT, OEM Type, each, Boeing P/N: K10011-1 (equals qty 2 of K10011-2), adjustable straps to bypass attachment detail (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B787-110 | INLET COVER (GENERAL ELECTRIC), Boeing Tool No: PREFAD48BENC54Z001, 8 ball lock attachment details | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B787-115 | INLET COVER (ROLLS ROYCE), Boeing Tool No: PREFAD48BENC54Z002, 8 ball lock attachment details | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BACB30US10K47 | BOEING 767 BOLT, P/N: BACB30US10K47 PART 4 57-50-01. Includes Certification. | 1 | |
| BACN12M-52-1AE | BOEING NAMEPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BACN12M1SW | BOEING NAMEPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BASE PLATES 717RS2 1/4 | BOEING UT REFERENCES STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BASE PLATES 717RS2 1/8 | BOEING UT REFERENCES STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BFSS727 | Boeing Fuselage Support Structure | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BH24944 | TEMPCAL PROBE KIT (USED ON BOEING 737-300/-500 A/C) | 8 | |
| BH24944-2 | KIT- HEATER PROBES, TEMPCAL (BOEING P/N 65-91500-4), FOR -400 AIRPLANES HOWELL INSTRUMENTS, | 5 | |
| BL090-6 | BLADE PROBE (BOEING) | 1 | |
| BOEING NLG BYPASS PIN FOR B737 | BOEING NLG BYPASS PIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOEING TOOLING | BOEING TOOLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOEING-SPANNER | BOEING SPANNER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOF65B00162AOG | BOEING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOF65B07950 | BOEING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOFAOGTOOL747LG0013 | BOEING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOFSM321U0000 | BOEING TOOL KIT | 1 | |
| BUTTON HEAD CAL STD | BOEING BUTTON HEAD CALIBRATION STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10011-31 | BOEING 777 MOORING EQUIPMENT KIT | 4 | |
| C12-DEL-3C1N | REPAIR REFERENCE STANDARD GR/EP LAMINATE STEP DELAM DEFECT. ALL BOEING AIRCRAFT MODELS PART 1 51-01- | 3 | |
| C12-DEL-3C2N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY CARBON FIBER, (DEL) INTERPLY DELAMANATIONS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY CARBON FIBER, (DIS) SKIN TO CORE DISBONDS | 3 | |
| C12-DIS-3C2N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY CARBON FIBER, (PCS) POTTING AND CORE SPLICE | 3 | |
| C12-PCS-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (PCS) potting and core splice | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY | 3 | |
| C12-POT-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (POT) skin to potting disbonds | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12002-7 | HOSE, DRAIN - SURGE SUMP (USED ON SURGE TANKS ON ALL 727 & 757'S &737 AND USED ON MAIN WING TANKS ON 727, 737-100 /-200, (THE BOEING COMPANY) | 22 | |
| C12005-5 | FLAP LUB TOOL, BOEING JACKSCREW | 14 | |
| C21001-12 | TEST EQUIPMENT COOLING SYSTEM PERFORMANCE (BOEING 737-300/400/500) | 1 | |
| C21001-16 | TEST EQUIPMENT COOLING SYSTEM PERFORMANCE (BOEING 737-300/400/500) | 1 | |
| C22001-13 | TEST BOX - IRS MASTER CAUTION MODULE (BOEING 737-300 THRU -500) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C22003-22 | TEST BOX - MACH TRIM ACTUATOR (BOEING 737-300 THRU -500) | 4 | |
| C22004-1 | BREAKOUT BOX - IFSAU (BOEING 737-3- THRU -500) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C22005-4 | BREAKOUT BOX - MULTIPURPOSE,100 PIN (BOEING 737-300 THRU -500) | 1 | |
| C22005-5 | BREAKOUT BOX - MULTIPURPOSE,100 PIN (BOEING 737-300 THRU -500) | 2 | |
| C22005-6 | BREAKOUT BOX - MULTIPURPOSE,100 PIN (BOEING 737-300 THRU -500) | 2 | |
| C24-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C24-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C24-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C24-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C24002-78 | JACK ADAPTER VSCF-IDG BOEING 737 | 15 | |
| C24003-1 | REMOVER/INSTALLER BATTERY (THE BOEING COMPANY) | 16 | |
| C24004-1 | POWER DISTRIBUTION PANEL - REMOVAL & INSTALLATION EQPT (THE BOEING COMPANY) | 6 | |
| C25002-1 | REMOVAL/INSTALLATION TOOL - 737 BOEING SKY INTERIOR CEILING PANEL | 7 | |
| C26001-20 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300) | 1 | |
| C26002-21 | TEST EQUIPMENT - ENGINE/APU FIRE DETECTION SYSTEM (BOEING 737-300 THRU -500) | 17 | |
| C26004-33 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -900) | 14 | |
| C26004-8 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 11 | |
| C26005-1 | TEST BOX - APU/ENGINE FIRE DETECTION SYSTEM (THE BOEING COMPANY) | 13 | |
| C26006-1 | TEST BOX - CARGO FIRE EXTINGUISHING SYSTEM ( APPLICABILITY: 737 ALL EXCEPT 737-700 BBJ (BBJ), 737-800 BBJ (BBJ2 ), 737- (THE BOEING COMPANY) | 13 | |
| C27001-16 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (BOEING 737-100/200) | 6 | |
| C27001-23 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (BOEING 737-300) | 2 | |
| C27001-24 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (BOEING 737-300 THRU -500) | 4 | |
| C27001-35 | GROUND LOCK SET - OUTBOARD SPOILER ACTUATORS (CONTAINS TWO LOCK ASSEMBLIES) (THE BOEING COMPANY) | 11 | |
| C27007-31 | TEST BOX - CUTOUT SWITCH, STAB TRIM CONTROL (LINE MAINT) (THE BOEING COMPANY) | 17 | |
| C27013-1 | TEST BOX, AUXILIARY PRINTED CIRCUIT ASSY, DIGITAL STALL WARNING COMPUTER (DSWC) (BOEING 737-300 THRU -400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27013-11 | TEST BOX, AUXILIARY PRINTED CIRCUIT ASSY, DIGITAL STALL WARNING COMPUTER (DSWC) (BOEING 737-300 THRU -400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27016-1 | TEST BOX - CENTRAL PROCESSING UNIT PCA CARD (BOEING 737-300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27016-11 | TEST BOX - CENTRAL PROCESSING UNIT PCA CARD (BOEING 737-300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27022-1 | CLAMP SET - TRAILING EDGE FLAP TORQUE TUBE (THE BOEING COMPANY) | 15 | |
| C27028-21 | RIGGING BAR - ELEVATOR TAB (THE BOEING COMPANY) | 16 | |
| C27032-1 | MEASUREMENT EQPT - STABILIZER/ELEVATOR (SKI JUMP) (THE BOEING COMPANY) | 11 | |
| C27034-1 | SLING EQPT - ELEVATOR REMOVAL/INSTALLATION (THE BOEING COMPANY) | 18 | |
| C27035-20 | SLING EQPT - RUDDER REMOVAL/INSTL (THE BOEING COMPANY) | 17 | |
| C27036-1 | SUPPORT SET - FORWARD ELEVATOR CONTROL QUADRANT (THE BOEING COMPANY) | 7 | |
| C27038-1 | LOCKOUT PIN - L. E. CRUISE DEPRESSURIZATION VALVE (THE BOEING COMPANY) | 7 | |
| C27038-6 | LOCKOUT PIN - L. E. CRUISE DEPRESSURIZATION VALVE (THE BOEING COMPANY) | 21 | |
| C27040-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK (THE BOEING COMPANY) | 5 | |
| C27042-1 | TORQUE WRENCH EQPT - RUDDER PCU ATTACHMENT (THE BOEING COMPANY) | 14 | |
| C27045-1 | RIGGING EQUIPMENT - SLAT (THE BOEING COMPANY) | 19 | |
| C27046-21 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR (CONTAINS 4 LOCK ASSEMBLIES) (USED ON SHORT FIELD PERFORMANCE AIRPLANES AND A (THE BOEING COMPANY) | 3 | |
| C27047-19 | LOCK SET - FLIGHT SPOILER ACTUATOR (CONTAINS 8 LOCK ASSEMBLIES) (NOT APPLICABLE TO SFP AIRPLANES; SEE C27047-21 FOR SFP (THE BOEING COMPANY) | 9 | |
| C27049-36 | REMOVAL/INSTALLATION EQUIPMENT - RUDDER PCU (FOR ORIGINAL & RSEP PCU) (THE BOEING COMPANY) | 13 | |
| C27050-1 | boeing change | 1 | |
| C27051-1 | LOCK SET - LE SLAT AND KRUEGER FLAP ACTUATORS FLAPS (THE BOEING COMPANY) | 16 | |
| C27052-25 | SLING EQPT - TRAILING EDGE FLAPS (THE BOEING COMPANY) | 15 | |
| C27054-1 | THREAD PROTECTOR SET - HORIZ STAB HINGE PIN (THE BOEING COMPANY) | 10 | |
| C27055-1 | SLING - AILERON, REMOVAL/INSTALLATION (THE BOEING COMPANY) | 13 | |
| C27056-19 | SLING EQPT - LEADING EDGE SLAT, REMOVAL AND INSTALLATION (THE BOEING COMPANY) | 9 | |
| C27057-1 | LOCK - RUDDER, PCU REMOVED (THE BOEING COMPANY) | 15 | |
| C27060-1 | ADAPTER EQPT - CONTROL WHEEL (THE BOEING COMPANY) | 21 | |
| C27064-1 | TORQUE WRENCH ADAPTER - MANUAL, STAB TRIM WHEEL (THE BOEING COMPANY) | 16 | |
| C27065-1 | CHECK EQPT - JACKSCREW BACKLASH, HORIZ STAB (THE BOEING COMPANY) | 4 | |
| C27066-1 | LOCK EQPT - AILERON/ELEVATOR PCU INPUT ROD (POGO) (THE BOEING COMPANY) | 24 | |
| C27078-1 | MEASUREMENT TOOL - STAB SYSTEM TEST (THE BOEING COMPANY) | 11 | |
| C27107-2 | LOCK ASSY BOEING TOOLING | 3 | |
| C29002-17 | TEST BOX, RUDDER POWER CONTROL UNIT (THE BOEING COMPANY) | 19 | |
| C32012-12 | SOCKET AXLE NUT (THE BOEING COMPANY) | 24 | |
| C32012-8 | REMOVAL/INSTL EQPT - WHEEL RETENTION NUT, MLG AND NLG (THE BOEING COMPANY) | 6 | |
| C32013-1 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION (THE BOEING COMPANY) | 16 | |
| C32015-18 | PULLER EQPT - FUSE PIN, MLG FORWARD TRUNNION SUPPORT (THE BOEING COMPANY) | 8 | |
| C32016-33 | RMVL/INSTL EQPT - NLG LOWER SEALS (THE BOEING COMPANY) | 12 | |
| C32017-1 | REPLACEMENT EQPT - LWR BEARING SEALS, MAIN LANDING GEAR (THE BOEING COMPANY) | 5 | |
| C32020-1 | EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING (THE BOEING COMPANY) | 14 | |
| C32021-1 | WRENCH SET - RETAINER NUT, REM/INSTL, ANTI-SKID, TRANSDUCER, MLG (THE BOEING COMPANY) | 23 | |
| C32022-17 | PROTECTOR THREAD (THE BOEING COMPANY) | 19 | |
| C32022-20 | PROTECTOR THREAD (THE BOEING COMPANY) | 32 | |
| C32022-33 | THREAD PROTECTOR MLG UDERSIZED BOEING 737NG | 4 | |
| C32022-42 | THREAD PROTECTOR MLG UDERSIZED BOEING 737NG | 4 | |
| C32025-7 | SPANNER WRENCH - GLAND NUT, NOSE LANDING GEAR (THE BOEING COMPANY) | 22 | |
| C32026-1 | DOWNLOCK EQPT - NLG AND MLG ***** FLYAWAY EQUIPMENT ***** (CONTAINS 3 LOCK ASSEMBLIES) (THE BOEING COMPANY) | 26 | |
| C32026-12 | BOEING BBJ/737 NOSE/MAIN LANDING GEAR DOWNLOCK PIN ASSEMBLY | 7 | |
| C32026-15 | BOEING BBJ/737 NOSE/MAIN LANDING GEAR DOWNLOCK PIN ASSEMBLY | 12 | |
| C32026-6 | BOEING BBJ/737 NOSE/MAIN LANDING GEAR DOWNLOCK PIN ASSEMBLY | 13 | |
| C32028-1 | BOEING CHANGE | 4 | |
| C32028-59 | RMVL/INSTL EQPT - WALKING BEAM ASSY, MAIN LANDING GEAR (THE BOEING COMPANY) | 8 | |
| C32029-1 | PIN INSTL/RMVL KIT - MAIN LANDING GEAR (THE BOEING COMPANY) | 8 | |
| C32030-10 | RETENTION STRAP EQPT - INNER CYL, NOSE & MAIN LANDING GEAR (THE BOEING COMPANY) | 21 | |
| C32031-1 | REMOVAL/INSTL EQUIPMENT - AFT TRUNNION PIN, MLG (THE BOEING COMPANY) | 18 | |
| C32032-57 | PULLER EQPT - AXLE/BRAKE SLEEVE, MLG (THE BOEING COMPANY) | 8 | |
| C32032-98 | PULLER EQPT - AXLE/BRAKE SLEEVE, MLG (THE BOEING COMPANY) | 9 | |
| C32033-1 | RMVL/INSTL EQPT - TRUNNION PIN, NLG (THE BOEING COMPANY) | 18 | |
| C32034-211 | RMVL/INSTL EQPT, MAIN LANDING GEAR (THE BOEING COMPANY) | 4 | |
| C32035-1 | METERING PIN & RETAINER RING R/I EQPT - NLG (THE BOEING COMPANY) | 15 | |
| C32044-1 | CHECK EQUIPMENT - FREEPLAY, NLG (THE BOEING COMPANY) | 9 | |
| C33001-1 | TEST CABLING - 737 BOEING SKY INTERIOR LIGHT ASSEM | 2 | |
| C33001-1-REVB | TEST CABLING - 737 BOEING SKY INTERIOR LIGHT ASSEMBLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C33001-58 | TEST CABLING - 737 BOEING SKY INTERIOR LIGHT ASSEM | 7 | |
| C34001 | ADAPTER ASSEMBLY - SMITHS (LEAR-SIEGLER) FLIGHT MANAGEMENT COMPUTER (FMC)/CONTROL DISPLAY UNIT (CDU), BOEING AUTOMATIC TEST STATION (ATS). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C34005-1 | BOX - EXTENDER, RADIO ALTIMETER RECEIVER/TRANSMITTER (REQ'D FOR ALLIED SIGNAL ALA-52B RA R/T) (THE BOEING COMPANY) | 6 | |
| C34011 | Adapter Equipment -Honeywell Mode Control Panel (Mcp) And Flight Control Computer (Fcc) To Boeing Automatic Test Station (Ats-182) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C34012-21 | BOX, TEST - TOTAL AIR TEMPERATURE PROBE, AIR DATA SYSTEM (USED ON ROSEMOUNT TAT 102JE2FG. USE WITH DECADE RESISTANCE BO (THE BOEING COMPANY) | 2 | |
| C35001-1 | PRESSURE LEAK TEST EQUIPMENT - CREW OXYGEN SYSTEM (THE BOEING COMPANY) | 5 | |
| C38001-1 | PLUG - DRAIN MAST, WASTE WATER (THE BOEING COMPANY) | 4 | |
| C38002-1 | PLUG EQPT - SKIN FITTING, DOOR SILL DRAIN (THE BOEING COMPANY) | 13 | |
| C451000184-E | VALVE, SOLENOID, 2 WAY (BOEING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C49006-1 | PROTECTOR, THREAD - APU MOUNT BOLT (THE BOEING COMPANY) | 33 | |
| C49006-2 | THREAD PROTECTOR ACCESSORIES TO C49006-1 THREAD PROTECTOR EQUIPMENT - AUXILIARY POWER UNIT MOUNT BOLTS OEM: BOEING | 8 | |
| C49007-20 | HOIST EQPT - AUXILIARY POWER UNIT (AE131-9 APU) (THE BOEING COMPANY) | 4 | |
| C49008-37 | ADAPTER EQPT - APU JACKING (THE BOEING COMPANY) | 11 | |
| C49009-1 | TOOL KIT- APU DELETION (THE BOEING COMPANY) | 14 | |
| C49010-50 | CRADLE ASSY - AE131-9B APU (THE BOEING COMPANY) | 25 | |
| C49011-1 | TEST EQPT - FUEL FEED, AUX. POWER UNIT (THE BOEING COMPANY) | 9 | |
| C52007-1 | TORQUE WRENCH ADAPTER EQUIPMENT - AUTOMATIC OVERWING EXIT HATCH (THE BOEING COMPANY) | 10 | |
| C52008-1 | ADAPTER, TORQUE WRENCH - GALLEY AND ENTRY DOOR (THE BOEING COMPANY) | 19 | |
| C54007-1 | FEELER GAGE - CFM56-7 STRUT TO WING (THE BOEING COMPANY) | 5 | |
| C54008-1 | AFT FAIRING - REMOVAL & INSTALLATION (THE BOEING COMPANY) | 5 | |
| C54009-27 | RMVL / INSTL - FUSE PIN (THE BOEING COMPANY) | 10 | |
| C54010-26 | SLING EQPT - FUSE PIN R/I, CFM56-7 (THE BOEING COMPANY) | 4 | |
| C54015-1 | SPANNER WRENCH - THRUST REVERSER HINGE FITTING (THE BOEING COMPANY) | 14 | |
| C55002-1 | SET, PUNCH - HORIZONTAL STABILIZER CENTER SECTION (THE BOEING COMPANY) | 18 | |
| C55005-11 | PIN REMOVAL EQPT - HORIZONTAL STABILIZER (THE BOEING COMPANY) | 13 | |
| C55007-1 | SLING EQPT - HORIZONTAL STABILIZER, REMOVAL/INSTL (THE BOEING COMPANY) | 18 | |
| C57003-1 | DOOR ASSEMBLY - PRESSURE TEST, BOEING WINGLETS (NOT APB WINGLETS) | 5 | |
| C57003-41 | DOOR ASSEMBLY - PRESSURE TEST, BOEING WINGLETS (NOT APB WINGLETS) | 1 | |
| C71015-80 | ENGINE SLING EQPT - OVERHEAD SHOP HANDLING (THE BOEING COMPANY) | 3 | |
| C71015-83 | ENGINE SLING EQPT - OVERHEAD SHOP HANDLING (THE BOEING COMPANY) | 16 | |
| C71020-91 | BOOTSTRAP EQPT - CFM56-7 ENGINE (THE BOEING COMPANY) | 26 | |
| C71022-6 | TORQUE WRENCH EQPT - CFM56-7 ENGINE BOLTS (THE BOEING COMPANY) | 17 | |
| C71023-1 | FIXTURE, PROOFLOAD - CFM56-7 BOOTSTRAP (THE BOEING COMPANY) | 7 | |
| C71024-1 | SLING ASSY - AFT ENGINE MOUNT, CFM56-7 (THE BOEING COMPANY) | 10 | |
| C71025-1 | SAFETY SCREEN - PERSONNEL BARRIER, CFM56-7 INLET (THE BOEING COMPANY) | 10 | |
| C71026-1 | SLING ASSY - FAN COWL, CFM56-7 ENGINE (THE BOEING COMPANY) | 9 | |
| C71026-8 | SLING ASSY - FAN COWL, CFM56-7 ENGINE (THE BOEING COMPANY) | 4 | |
| C71027-1 | INSTALLATION/REMOVAL FRAME ASSY - INLET COWL (THE BOEING COMPANY) | 11 | |
| C76002-20 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY (THE BOEING COMPANY) | 4 | |
| C77004-10 | BOX - TEST, AIRBORNE VIBRATION MONITORING (REQUIRED WITH GENERIC - S360N021-101/-102 - AVM MONITOR ONLY) (737-300/400/50 (THE BOEING COMPANY) | 18 | |
| C78004-1 | LOCK PIN THRUST REVERSER (THE BOEING COMPANY) | 28 | |
| C78005-21 | PUMP THRUST REVERSER (THE BOEING COMPANY) | 15 | |
| C78005-53 | PUMP - OPEN THRUST REVERSER (C78005-53 BOEING P/N) | 21 | |
| C78020-14 | FIXTURE C' DUCT (THE BOEING COMPANY) | 23 | |
| C78023-1 | ASSEMBLY-LOCK, THRUST REVERSER ACTUATOR, CFM56-7 (CONTAINS 2 LOCKS) (THE BOEING COMPANY) | 32 | |
| CFRP-AL-R&D-1 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CFRP-AL-R&D-2 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CFRP-AL-R&D-3 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CFRP-AL-R&D-4 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CFRP-AL-R&D-5 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHRS-1-12 | Composite Standard, Boeing 767 PT1 51-01-01 PG14- R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHRS-1-3 | COMPOSITE STANDARD BOEING 767 PT1 51-01-01 PG14 R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHRS-1-6 | COMPOSITE STANDARD BOEING 767 PT1 51-01-01 PG14 R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHRS-1-9 | COMPOSITE STANDARD, BOEING 767 PT1 51-01-01 PG 14 R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COM-1916 | ADAPTER KIT PITOT STATIC BOEING | 1 | |
| COMPOSITE STANDARD 1-10 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 1-10 PLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COMPOSITE STANDARD 11-20 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 11-20 PLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COMPOSITE STANDARD 21-30 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 21-30 PLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP30468-1 | C' DUCT OPENING SLING ON BOEING AIRCFAFT STRUT - RB211-535C & E4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP30468/1 | C' DUCT OPENING SLING ON BOEING AIRCFAFT STRUT - RB211-535C & E4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP30476 | REM,AIR STARTER TO HS. GEARBOX ENGINE ON WING BOEING 757 , RB211-535C | 3 | |
| CP30809 | ADAPTOR HOIST KIT FOR BOEING BOOTSTRAP INSTALLATION - RB211-524 | 1 | |
| CP3228 | FORE & AFT FAIRING SUPPORT PANEL RC010 CONWAY (BOEING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CS-B737-AG101 | Adaptador para Boeing 737 | 1 | |
| CS-B767-AG101 | Adaptador para Boeing 767 | 1 | |
| CSA75700HT-3 | PITOT ADAPTER HIGH TEMP FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 3 | |
| CWEE1-63 | SLING BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DC-9/MD-80-1 FIG 21 | Boeing DC-9/MD-80 Reference Standard Design (1- Assembly) Figure 21, Sheet 1-5 Page 31-35, 7-5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMAK-B737-678 | ADAPTOR KITSET FOR BOEING 737 | 3 | |
| DMC1264 | CRIMPING TOOL KIT, BOEING 737-600/700/800/900/BBJ/NG KIT | 5 | |
| DMC1299 | BOEING 737-200 TO 800/BBJ/NG WIRING SYSTEM MAINTEN | 1 | |
| DMC1328 | BOEING AH64A APACHE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC1579 | McDonnell Douglas DC-8, DC-9, DC-10 & Boeing 757 Wiring System Maintenance Kit | 1 | |
| DMC185 | BOEING 707-727-737-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC185MOD1 | BOEING 707,727,737-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC201 | BOEING 707-727-747 E | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC201MOD1 | BOEING 707,727,747SP TOOL KIT | 3 | |
| DMC2119 | DMC2119 KC-46A Boeing Pegasus Wiring System Service Kit | 1 | |
| DMC2155 | KC-46A BOEING PEGASUS KIT | 1 | |
| DMC221 | BOEING 707-727-757 ELECTRICAL KIT | 1 | |
| DMC221MOD1 | BOEING TOOL KIT | 3 | |
| DMC262 | BOEING DC8,9,10 ELECTRICAL KIT | 4 | |
| DMC306 | BOEING MCDONNELL DOUGLAS F-15 EAGLE A.I.S | 2 | |
| DMC355 | BOEING ELECTRICAL KI | 2 | |
| DMC355MOD1 | BOEING & MCDONNELL | 1 | |
| DMC498-1001 | BOEING MCDONNELL DOUGLAS F/A-18A, TF/A-18A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC502 | WIRING SYSTEM MAINTENANCE KIT FOR BOEING 757-200/3 | 6 | |
| DMC567 | MAINTENANCE KIT FOR BOEING 757/767 | 2 | |
| DMC567MOD1 | Boeing 757 & 767 Wiring System Maintenance Kit | 2 | |
| DMC603 | BOEING MD500E | 4 | |
| DMC621 | BOEING, BOMBER | 1 | |
| DMC712 | BOEING MCDONNELL DOUGLAS F-15 EAGLE A.I.S | 3 | |
| DMC717 | BOEING 717 ELECTRICAL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC723 | Boeing CH-47D Chinook Wiring System Maintenance Kit | 2 | |
| DMC733 | BOEING MCDONNELL DOUGLAS AV-8B HARRIER II | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC736 | BOEING CANADA CH113 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC737D | COVER: DRAIN MAST, BOEING 737 | 1 | |
| DMC769 | DMC769 Boeing 737 Wiring System Maintenance Kit | 6 | |
| DMC80 | BOEING ELECTRICAL KIT MD80 | 3 | |
| DMC896 | BOEING T-45A TRAINER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMC904 | DMC904 BOEING 707, 727, 737-100-300, 747, 757, & 767 | 1 | |
| DMC921 | Wiring System Maintenance Kit for the Boeing 747-400 | 3 | |
| DMC975 | BOEING ELECTRICAL KIT | 1 | |
| DMC977 | BOEING 777 TOOL KIT | 3 | |
| DSS2020 | BOEING 707/727/737 220-VOLT 2 BLANKET CURE KIT | 1 | |
| DYNAM0METER767 | BOEING 767 DYNAMOMETER 0-20000LBS | 1 | |
| F12-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLASS, (DEL) INTERPLY DELAMANATIONS | 1 | |
| F12-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLASS, (DIS) SKIN TO CORE DISBONDS | 1 | |
| F12-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLASS, (PCS) POTTING AND CORE SPLICE | 1 | |
| F12-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLSS, (POT) SKIN TO POTTING DISBONDS | 1 | |
| F24-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F24-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F24-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F24-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F28011000-1 | BOEING 787 BRAKE HANDLING TOOLS | 1 | |
| F70033 | REMOVER ASSEMBLY - INTERIOR TRIM (BOEING 737-100/200) | 3 | |
| F70038 | WRENCH - DOOR HANDLE MECHANISM NUT (THE BOEING COMPANY) | 12 | |
| F70085 | WRENCH, SPANNER - BEARING RETAINER NUT (DOOR VERTICAL POSITIONING) (THE BOEING COMPANY) | 22 | |
| F70199-1 | INFLATOR - TIRE, LANDING GEAR TIRES (FOR 727, 737, AND 757) (THE BOEING COMPANY) | 22 | |
| F70199-2 | BOEING F70199-2 TIRE INFLATION 300 PSI CALIBRATED GAUGE ONLY | 4 | |
| F70199-30 | BOEING F70199-2 TIRE INFLATION 300 PSI CALIBRATED GAUGE ONLY | 1 | |
| F70199-52 | BOEING DIGITAL TIRE INFLATION TOOL | 20 | |
| F70199-6 | AIR CHUCK(BOEING) | 7 | |
| F70200-1 | Boeing Facility Strut Inflation Tool | 19 | |
| F70207-107 | RIGGING PIN KIT BOEING | 8 | |
| F70207-108 | Kit, Rigging Pins (Boeing 737-100/200) | 4 | |
| F70207-135 | Kit, Rigging Pins (Boeing 737-100/200) | 9 | |
| F70207-139 | Kit, Rigging Pins (Boeing 737-300/400/500) | 18 | |
| F70230-1 | TOOL - RIVET REPAIR, TEMPORARY, SELF SEALING RIVETS, FUEL SYSTEM (THE BOEING COMPANY) | 13 | |
| F70252-1 | ADAPTER - ROLLER PAILET (BOEING 737-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70266-305 | ENGINE CONE BOLT THREAD PROTECTOR - BOEING | 9 | |
| F70284-1 | WEAR GAGE SET - GROUND POWER PLUG AND RECEPTACLE (THE BOEING COMPANY) | 27 | |
| F70300-1 | ADAPTER - DRIVE, FLAP TORQUE TUBE SPLINE USED WITH CUSTOMER FURNISHED 1/2" DRIVE AIRMOTOR (THE BOEING COMPANY) | 23 | |
| F70308-15 | PROOF LOAD TAG - BOEING GSE | 5 | |
| F70308-18 | ID TAG - CABLE SLINGS WITH SWAGED FITTINGS - BOEING GSE | 1 | |
| F70308-2 | BOEING PROOF LOAD PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70308-23 | BOEING MAINTENANCE TAG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70308-24 | IDENT PLATE - BOEING GSE | 4 | |
| F70308-25 | IDENT PLATE - BOEING GSE OVHD LIFT EQPT ONLY | 1 | |
| F70328-1 | PROBE - FILM RESISTANCE MEASURING (THE BOEING COMPANY) | 11 | |
| F70336-1 | WRENCH - SPANNER, MAIN ENTRY DOOR ASSIST HANDLE (THE BOEING COMPANY) | 21 | |
| F71267 | WRENCH ASSEMBLY - PINION GEAR (STABILIZER TRIM ACTUATOR) (THE BOEING COMPANY) | 23 | |
| F71313-36 | WRENCH, SOCKET - NLG STEERING CYLINDER ROD END (THE BOEING COMPANY) | 5 | |
| F71336-501 | LOCK ASSEMBLY, STABILIZER TRIM (THE BOEING COMPANY) | 28 | |
| F72714 | ENGINE SUPPORT BEAMS - BOEING | 2 | |
| F72714-2 | BOEING TOOL | 3 | |
| F72735-13 | BOEING BYPASS PIN | 24 | |
| F72790 | MOUNT - CONTROL WHEEL PROTRACTOR (THE BOEING COMPANY) | 26 | |
| F72808-1 | TEST JIG - AUTO THRITTLE CLUTCH (BOEING 737/100/200) | 2 | |
| F72867-1 | ADAPTER ASSY, CONTROL WHEEL - TORQUE AND FORCE TEST (THE BOEING COMPANY) | 23 | |
| F72890-1 | BOOTSTRAP BOEING | 3 | |
| F72900-1 | BOEING TOOL | 5 | |
| F72917-19 | TEST CONSOLE - GROUND FAULT PROTECTION SYSTEM, HYDRAULI EMDP (727 L/N 1149 & ON & A/P'S INCORP. SB 29-47)(737 L/N 565 & (THE BOEING COMPANY) | 20 | |
| F72928-63 | AIR PRESSURE REGULATOR EQPT - ELEVATOR FEEL COMPUTER (THE BOEING COMPANY) | 12 | |
| F72942-1 | SET - LUBRICATION, ENTRY, CARGO, SERVICE & GALLEY DOOR CAMSHAFT BEARINGS (THE BOEING COMPANY) | 23 | |
| F72950-158 | BASE - TRANSPORTATION, APU (THE BOEING COMPANY) | 16 | |
| F72951-1 | MANOMETER - WATER, TEST EQUIPMENT (THE BOEING COMPANY) | 16 | |
| F72955-31 | SET - SPANNER WRENCH, A.N. SPANNER TYPE (-1 THRU -12 MADE TO OBSOLETE A.N. SPECS, -31 THRU -42 ARE IDENTI ICAL TO -1 TO (THE BOEING COMPANY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72959 | SET - SPANNER WRENCH, A.N. SPANNER TYPE (-1 THRU -12 MADE TO OBSOLETE A.N. SPECS, -31 THRU -42 ARE IDENTI ICAL TO -1 TO (THE BOEING COMPANY) | 11 | |
| F72959-40 | WRENCH, SPANNER - NOSE LANDING GEAR TRUNNION PIN RETAINER NUT (THE BOEING COMPANY) | 22 | |
| F72977-62 | SET, GAGE - HYDRAULIC BRAKE SYSTEM, PRESSURE CHECKING (THE BOEING COMPANY) | 15 | |
| F72988 | ENGINE SUPPORT BEAMS - BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72998-1 | ADAPTER CABLE - N1 SIMULATOR (BOEING 737-100/200) | 1 | |
| F72998-15 | ADAPTER CABLE - N1 SIMULATOR (BOEING 737-100/200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80027-13 | LOCK ASSEMBLY - HORIZONTAL STABILIZER (THE BOEING COMPANY) | 6 | |
| F80033-8 | ADAPTER ASSEMBLY - WRENCH, HOOK SPANNER (THE BOEING COMPANY) | 22 | |
| F80049-1 | LOCK ASSEMBLY - FLIGHT CONTROLS (BOEING 737-100/200) | 3 | |
| F80049-12 | LOCK ASSEMBLY - FLIGHT CONTROLS (HYDRAULIC MODULE ELECTRICAL CONTROL BLOCKING TOOL) (THE BOEING COMPANY) | 9 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (BOEING 737-100 THRU -500) | 5 | |
| F80049-46 | LOCK ASSEMBLY - FLIGHT CONTROLS (BOEING 737-100 THRU -500) | 15 | |
| F80049-56 | LOCK ASSEMBLY - FLIGHT CONTROLS (BOEING 737-100 THRU -500) | 16 | |
| F80055-1 | TRAMMEL BAR ASSEMBLY - STABILIZER TRIM ACTUATOR (THE BOEING COMPANY) | 28 | |
| F80063-501 | FIXTURE - ELEVATOR RIGGING AND RESTRAINING (THE BOEING COMPANY) | 16 | |
| F80091-1 | THRESHOLD ADAPTER SET - CARGO LOADING (BOEING 737-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80091-3 | THRESHOLD ADAPTER SET - CARGO LOADING (BOEING 737-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80113-1 | BOEING TOOL - ROLLER SWAGE KIT | 2 | |
| F80129-100 | ANTISKID/AUTO BRAKE TESTER (BOEING) | 9 | |
| F80135-13 | CABLE - HYDRAULIC LEAKAGE CHECK (THE BOEING COMPANY) | 13 | |
| F80145-4 | DOOR, PURGING - CENTER INTEGRAL WING FUEL TANK (THE BOEING COMPANY) | 10 | |
| F80153-1 | SAFETY PIN - ELEVATOR FEEL COMPUTER (THE BOEING COMPANY) | 16 | |
| F80166-1 | FIXTURE, TEST - PRESSURE RELIEF, FLAME ARRESTOR SURGE TANK (REQUIRED IF FLAME ARRESTOR IS INSTALLED) (THE BOEING COMPANY) | 24 | |
| F80168-1 | SOCKET AXLE NUT (THE BOEING COMPANY) | 30 | |
| F80170-1 | TES MANIFOLD - BYPASS VALVE AILERON/ELEVATOR PCU (BOEING 737-100 THRU -500) | 4 | |
| F80178-1 | SETTING TOOL - FORWARD ENTRY DOOR LATCH ROLLER (THE BOEING COMPANY) | 17 | |
| F80181-1 | DRILL JIG AILERON TRIM INPUT SHAFT (BOEING 737-100/200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80182-1 | SLING BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80190-1 | RUDDER BALANCE WEIGHT SEALS OFFSET SCREWDRIVER (BOEING 737-100/200) | 4 | |
| F80197-5 | WRENCH SET - LIMIT SWITCH, FLAP CONTROL UNIT (THE BOEING COMPANY) | 23 | |
| F80198-12-REVC | **BOEING GSE | 1 | |
| F80201-1 | DRAIN SUMP (THE BOEING COMPANY) | 30 | |
| F80212-19 | ADAPTER - FORCE CHECK TOOL, RUDDER PEDAL (THE BOEING COMPANY) | 6 | |
| F80217-139 | TEST SET - SP177 AUTOPILOT, RUDDER/ELEVATOR/AILERON (BOEING 737-200 THRU -500) | 10 | |
| F80219-45 | LOAD INDICATING SYSTEM BOEING | 3 | |
| F80222-11 | PROTRACTOR - AILERON TAB ALIGNMENT (THE BOEING COMPANY) | 14 | |
| F80225-1 | FCC TEST EQUIPMENT - SP177 DUAL CHANNEL, AUTOPILOT (BOEING 737-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80225-19 | FCC TEST EQUIPMENT - SP177 DUAL CHANNEL, AUTOPILOT (BOEING 737-200) | 2 | |
| F80229-15 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-200) | 6 | |
| F80229-20 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 15 | |
| F80229-48 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 12 | |
| F80229-52 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 17 | |
| F80229-55 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-200) | 4 | |
| F80229-56 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-200) | 5 | |
| F80229-57 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-200) | 6 | |
| F80229-58 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-200) | 4 | |
| F80229-59 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 14 | |
| F80229-60 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 8 | |
| F80229-61 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300 THRU -500) | 15 | |
| F80229-69 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (SEE ITEL FOR CABLE ASSEMBLIES REQUIRED) -69 REPLACES -15 FOR FUTURE PROCUREM (THE BOEING COMPANY) | 16 | |
| F80236-1 | TEMPLATE SET - STOWAGE BIN STRIKER ADJUSTMENT (BOEING 737-100/200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80239-18 | LANYARD, PERSONNEL SAFETY - ENGINE MAINTENANCE (THE BOEING COMPANY) | 1 | |
| F80239-21 | LANYARD SAFETY (THE BOEING COMPANY) | 11 | |
| F80251-1 | BEARING EQUIPMENT - GROUND SPOILER ACTUATOR SUPPORT (BOEING 737-100-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80252-1 | SEAL INSTALLATION SET-COMPUTER ASSY (BOEING 737-100/200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80254 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| F80257 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| FB541-039-B737/GEARBOX | BOEING FISHPOLE GEARBOX CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-A GEARBOX COVER | FB541-BOEING GEARBOX COVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-B-TF-8 | ROLLER FOR BOEING FISHPOLE TOP FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-B/GEARBOX | BOEING FISHPOLE GEARBOX CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-B/GEARBOX AS | BOEING FISHPOLE GEARBOX ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-B/GEARBOX ASSY | BOEING FISHPOLE GEARBOX ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600-DW | DUMMY WEIGHT BOEING FISHPOLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600B | FISHPOLE HOIST FOR BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-600B-DW | DUMMY WEIGHT BOEING FISHPOLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-601 | BOEING FISHPOLE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB541-601B | BOEING FISHPOLE MANUAL HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB70-025-B757S-SE | TOW BAR FOR BOEING 757 SERIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FBP-787-1 | KIT, CCR FIBER OPTIC, LONG REACH - BOEING 787 | 4 | |
| FBP-787-CCR | KIT, CCR FIBER OPTIC, LONG REACH - BOEING 787 | 1 | |
| FDS40-0279 | BOEING 717 REMOTE PORT INTERFACE CABLE | 1 | |
| FDS47-5003 | STARS DATABASE 512 WPS NOTE: FOR BOEING 737-7 DATABASE | 1 | |
| FEN101EJ3040 | AIRCRAFT TRIPOD JACK – NOSE – FOR BOEING 737 AND A320 FAMILY | 1 | |
| FEN15EJ3040 | AIRCRAFT TRIPOD JACK €“ TAIL €“ FOR BOEING 737 AND A320 FAMILY | 1 | |
| FEN353EJ3040 | Aircraft Tripod Jack – WING – for Boeing 737 and A320 FAMILY | 1 | |
| FF171-5234 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM ROUND 2.50" DIAMETER O.D. / 1.125" DIAMETER I.D. EDM CORNER NOTCH: .030" x .030" +0.00/-0.002 WIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G21003-1 | PROBE STATIC PRESSURE - BOEING 747 TOOL | 6 | |
| G21007-1 | AIR FLOW CUP-LO/HI BLOW TEST (THE BOEING COMPANY) | 10 | |
| G24008 | BOEING1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27023-126 | BOEING TOOL | 1 | |
| G28005-35 | EQUIPMENT - CHECK FIXTURE, SURGE RELIEF VALVE (THE BOEING COMPANY) | 16 | |
| G32004-5 | BOEING INSTALL KIT | 5 | |
| G32021-18 | EQUIPMENT - FORCE GAGE, LANDING GEAR LEVER (THE BOEING COMPANY) | 14 | |
| G38004-13 | REMOVER WASTE BLOCKAGE (THE BOEING COMPANY) | 15 | |
| G38006-1 | REMOVER WASTE BLOCKAGE (THE BOEING COMPANY) | 14 | |
| G54016-1 | BOEING TOOLING | 1 | |
| G71036-106 | BOEING BOOTSTARP KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71043-1 | BOEING SLING EQUIPMENT | 5 | |
| G76002-15 | PROTRACTOR - THRUST REVERSER LEVERS, DIGITAL READOUT (THE BOEING COMPANY) | 8 | |
| GE-094 | QEC OFF-LINK ENGINE LONG-TERM STORAGE "RAIN CAP" STYLE COVER, GE90-94 (Boeing 777) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GE-105 | QEC OFF-LINK SHIPPING/TRANSPORT ENGINE COVER, GE90-115 Propulsor, fully enclosed (Boeing 777). AGSE Stand P/N: 9C6019P0Z | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GE-115 | QEC OFF-LINK ENGINE LONG-TERM STORAGE "RAIN CAP" STYLE COVER, GE90-115 (Boeing 777) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GHT-10 | Boeing (Douglas) MD80 NOSE JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GHT-15/A | Boeing (Douglas) MD90 TAIL JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GHT-50 | Boeing (Douglas) MD80 WING/MAIN JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H3312 | HEADSET GROUND-BOEING A/C | 13 | |
| H5265 | AIR CHUCKBOEING | 10 | |
| HC737130G42Z2 | BOEING 707/727/737 RADOME HEATER BLANKET 220V PLUS PLUGS | 1 | |
| HT717-1 | TESTER - ARINC 717 / ARINC 573, HANDHELD. OPTION 02 IS FOR BOEING 737, 757, & 767 CONFIGURATION. A/L MUST SPECIFY DFDR FOR CORRECT I/F CABLE ON 747 & 777. | 1 | |
| HTT02 | BOEING 737 LEACKAGE TEST KIT | 2 | |
| J-11339-9 | MOUNTING,SILICONE,GRN, BOEING 737 | 4 | |
| J11339-9 | MOUNTING,SILICONE,GRN, BOEING 737 | 4 | |
| J20009-68 | ADAPTER - CRADLE, INTERFACE (THE BOEING COMPANY) | 14 | |
| J22001-8 | TOOL SET - AUTO THROTTLE SERVO ASSY (THE BOEING COMPANY) | 6 | |
| J27058-17 | TOOL SET - SEAL INSTALLATION (-17 IS PART OF -1 SET) (THE BOEING COMPANY) | 4 | |
| J32011-3 | BOEING GSE | 17 | |
| J32011-3-REVF | BOEING GSE | 2 | |
| J32011-7-REVF | **BOEING GSE | 2 | |
| J32060-1 | EQUIPMENT - DRAIN, MLG/NLG OLEO STRUT (THE BOEING COMPANY) | 25 | |
| J32060-1-REVB | **BOEING GSE | 1 | |
| J34002-19 | FIXTURE - TEST, ANGLE OF ATTACK (APPLICABLE ONLY TO AIRPLANES EQUIPPED WITH ROSEMOUNT S233T913-1,-3,-4 AOA SENSORS) (-19 (THE BOEING COMPANY) | 18 | |
| J71001-66 | BOEING-SLING EQUIPMENT - INLET COWL | 12 | |
| JB-BBJ-WS-R | BOEING 737 WHEEL COVERS | 1 | |
| JMP/CF6/D/4037 | Engine Probe Boeing 747/767 CF6-80C2 | 1 | |
| JMP/CF6/D/4247 | Engine Probe Boeing 767, Airbus A310 CF6-80A2/A3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/CF6/D/6511 | Engine Probe Boeing 747/767, Airbus A330-200, (MDC)MD-11, Airbus A300-600F, Airbus A310-200F CF6-80C2, CF6-80E1, CF6-80C2 D1F, CF6-80C2 A5F, CF6-80C2 A3 | 1 | |
| JMP/CFM56/D/4462 | ENGINE PROBE BOEING 737-700/800 CFM56-7 | 4 | |
| JMP/CFM56/D/4538 | Engine Probe Boeing 737-300-400 CFM56-3 | 4 | |
| JMP/CFM56/D/6645 | ENGINE PROBE BOEING 737-700/800 CFM56-7B LONG PRO | 1 | |
| JMP/CFM56/D/6987 | Engine Probe Boeing 737-300-400 CFM56-3 (Long Probes Thrust Reversers closed) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/GE90-115B/D/4948 | Engine Probe Boeing 777-300ER GE90-115B (Long Probes Thrust Reversers closed)135” | 1 | |
| JMP/GE90-115B/D/4949 | Engine Probe Boeing 777-300ER GE90-115B | 1 | |
| JMP/GE90/D/4081 | Engine Probe Boeing 777 GE90 | 1 | |
| JMP/GE90/D/4599 | Engine Probe Boeing 777 GE90 (Long Probes Thrust Reversers closed) 127 1⁄2” | 1 | |
| JMP/GENX/D/6698 | ENGINE PROBE BOEING 787, BOEING 747-800 GENX (LON | 1 | |
| JMP/GENX/D/6783 | ENGINE PROBE BOEING 787, BOEING 747-800 GENX | 1 | |
| JMP/GEnx/D/6698 (11C4308P02) | Engine Probe Boeing 787, Boeing 747-800 GEnx (Long and Short Probes Combination Set) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/GEnx/D/6783 (11C4308P01) | Engine Probe Boeing 787, Boeing 747-800 GEnx | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/JT9D/D/4154 | Engine Probe Boeing 747-200 P & W JT9D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/LEAP/D/7028 | Engine Probe Airbus A320 Neo, Boeing 737 Max LEAP | 1 | |
| JMP/PW2000/D/6846 | Engine Probe Boeing 757 P & W 2000 (Long Probes Thrust Reversers closed) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/PW4000/D/4856 | Engine Probe Boeing 767-200/300, Airbus A300/A310,(MDC)MD-11 P & W 4000-94” Fan (PW 4152/4158/4462) | 1 | |
| JMP/PW4000/D/6601 | Engine Probe Boeing 767-300, Airbus A300/A310,(MDC)MD-11, Boeing 747-400 P & W 4000-94” Fan (Long Probes Thrust Reversers closed) 85” | 1 | |
| JMP/PW4000/D/6728 | Engine Probe Boeing 777-200 P & W 4000-112” Fan (Long Probes Thrust Reversers closed) | 1 | |
| JMP/RB211/D/4153 | Engine Probe Boeing 757 RB211-535E4 | 1 | |
| JMP/RB211/D/4249 | ENGINE PROBE BOEING 747-400 RB211-524 G&H (LONG PROBES THRUST REVERSERS CLOSED)178” | 1 | |
| JMP/RB211/D/6889 | Engine Probe Boeing 747-100B RB211-524C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/RB211/D/6984 | ENGINE PROBE BOEING 757 RB211-535E4 (LONG PROBES THRUST REVERSERS CLOSED) | 1 | |
| JMP/TRENT/D/6328 | ENGINE PROBE BOEING 777-200ER TRENT 800 | 1 | |
| JMP/TRENT/D/6754 | Engine Probe Boeing 787 TRENT 1000 (Long Probes Thrust Reversers closed) | 1 | |
| JMP/TRENT/D/6935 | ENGINE PROBE BOEING 777-200ER TRENT 800 (LONG PROBES THRUST REVERSERS CLOSED) | 1 | |
| JMP/TRENT/D/7015 | Engine Probe Boeing 787 TRENT 1000 (Long Probes Thrust Reversers closed -*test cell) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10007-1-REVNC | BOEING GSE | 1 | |
| K25001-1-REVNC | BOEING GSE | 1 | |
| K27003-1-REVB | BOEING GSE | 1 | |
| K27016-1-REVA | BOEING GSE | 1 | |
| K27025-28-REVD | BOEING GSE | 1 | |
| K27038-1-REVB | GSE BOEING GSE | 1 | |
| K27058-1-REVNC | BOEING GSE | 2 | |
| K32002-3-REVA | BOEING GSE | 1 | |
| K32022-5-REVA | **BOEING GSE | 1 | |
| K52002-68 | REWORK waiting on Boeing parts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-49-REVC-INCOMPLET | BOEING GSE | 1 | |
| K52007-1-REVB | BOEING GSE | 1 | |
| K52030-1-REVA | BOEING GSE | 1 | |
| K7-24 | LUBRICATION TOOL SET (BOEING REPER) F80167-13 | 2 | |
| KC10-7025-3 ASSEMBLY | CUSTOM MANUFACTURED BOEING REFERENCE STANDARD FOR ULTRASONIC INSPECTION 101/201 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KC10-7027 | BOEING REFERENCE STANDARD KC10 FUEL COMPENSATOR CUTOUT-INSPECTION.( 301 GUIDE AND 302 GUIDE ARE PART OF INSPECTION AND SOLD SEPARATELY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KHC-1160 | BOEING HYDRO COUPLING | 6 | |
| KHC-2014 | BOEING FAMILY COUPLER | 3 | |
| KPC3-480-325 | Red Kevlar Single Layer Airbus, Boeing, Bombardier, Dassault, Embraer Pitot Cover | 19 | |
| KPC3-775-625 | COVER: PITOT PROBE,KEVLAR, BOEING | 14 | |
| KPC3-775-625SPB | COVER: PITOT,KEVLAR, BOEING PN 17G57305-1 | 1 | |
| KPC3-825-8 | COVER: PITOT PROBE,KEVLAR, BOEING | 14 | |
| KPC4-775-625 | Red Kevlar Triple Layer Boeing 737, Embraer Legacy 600, Lockheed Martin C130H Pitot Cover | 2 | |
| L5A0298J40B | KIT ATC 36IN AC3B BOEING SST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J41B | KIT ATC 54IN AC3B BOEING SST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J42B | KIT ATC 36IN BTRY3B BOEING SST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J43B | KIT ATC 54IN BTRY3B BOEING SST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J45B | KIT ATC 36IN AC3B BOEING BLK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J46B | KIT ATC 36IN AC3B BOEING BLK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J47B | KIT ATC 36IN BTRY3B BOEING BLK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5A0298J48B | KIT ATC 54IN BTRY3B BOEING BLK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LINEAR MOUNT PLATE | BOEING CUSTOM PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LK757-723 | Air Data Accessory - Boeing 757 | 3 | |
| LUG-STD-TEST 1 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LUG-STD-TEST 3 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LUG-STD-TEST2 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT12N8042-100 | BOEING SIP TOOLING | 1 | |
| MIT340N5002-1 | BOEING TOOL KIT | 1 | |
| MODEL 111B | OXYGEN ANALYZER, PORTABLE, BATTERY OPERATED, ACCEPTABLE FOR USE IN CLASS I, DIVISION II AREAS. INCLUDES HOSE/FITTING TO MATE WITH BOEING AIRPLANE NITROGEN GENERATION SYSTEM OXYGEN TEST PORT. | 1 | |
| MP.090-60BL | BLADE PROBE (BOEING) | 1 | |
| MPN0145 | Boeing Intercostal sablon (2ea/kit) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NAS-777 | BOEING B777-200/300 NLG MLG CHANGE KIT (WHOLE SET). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NAS787-9-10 | BOEING B787-8/9/10 NLG MLG CHANGE KIT (WHOLE SET). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NB2604-DF | BOEING TIRE CHARGING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 1016 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1017 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1018 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1019 | BOEING REFERENCE STANDARD | 3 | |
| NDT 1020 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1021 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1039_0016 | REFERENCE BOEINGLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 1039_0020 | REFERENCE BOEINGLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 1039_0032 | REFERENCE BOEINGLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 1040 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1041 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1042 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1043 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1044 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1045 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1046 | BOEING STANDARD, 777 PT4 51-00-04:PG3 FIG1, 3 PLY, 5" X 3" X1" | 3 | |
| NDT 1048 | BOEING REFERENCE STANDARD | 4 | |
| NDT 1061 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1062 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1072 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1073 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1074 | BOEING REFERENCE STANDARD | 2 | |
| NDT 1084 | BOEING REFERENCE STANDARD | 1 | |
| NDT 1086-032 | Boeing Standard, .032" Bottom Layer | 3 | |
| NDT 1086-040 | BOEING REFERENCE STANDARD NDT1086-040 767 PT 4 53-00-01 AND 747 PT 4 53-30-05 | 3 | |
| NDT 1086-050 | Boeing Standard, .050" Bottom Layer | 3 | |
| NDT 1086-060 | Boeing Standard, .060" Bottom Layer | 3 | |
| NDT 1086-070 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1086-080 | Boeing Standard, .080" Bottom Layer | 3 | |
| NDT 1086-090 | Boeing Standard, .090" Bottom Layer | 3 | |
| NDT 1086-100 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1086-110 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1086-120 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 1087- 3 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 | 3 | |
| NDT 1088-072/050 | Boeing Reference Standard | 3 | |
| NDT 1088-144/050 | Boeing Reference Standard | 2 | |
| NDT 185 | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 188A | BOEING REFERENCE STANDARD | 1 | |
| NDT 189 | BOEING REFERENCE STANDARD | 2 | |
| NDT 192 | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 194B | Boeing Reference standard w/Certs | 2 | |
| NDT 3019 | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 3030 | BOEING REFERENCE STANDARD, 737 PT4 57-10-01: PAGE 5, FIGURE 2 | 2 | |
| NDT 3116 | BOEING REFERENCE STANDARD 737 PT 4 53-10-06 FIG 2. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3141 | BOEING REFERENCE STANDARD 737 PART 4 55-10-13 PAGE | 2 | |
| NDT 3152- A | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- F | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3152- K | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3156 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3164 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 7150-T7. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT 3166- 007 | BOEING REFERENCE STANDARD 737 PART 4 57-10-08 PAGE 6 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3170 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 16 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT 3171 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 17 FIGURE 3. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT 3172 | BOEING STANDARD 737 PT4 57-10-05 PG 14 FG 2 | 3 | |
| NDT 3285 | BOEING REFERENCE STANDARD 737 PART 6 53-30-63 PAGE 11 FIGURE 2. MATERIAL: 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3289 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3293 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 3299 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 398 | BOEING REFERENCE STANDARD 737 PT 4 53-10-01. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT 4232 | Boeing Standard, 747 PT4 55-10-03: PG6 FIG2, with cert | 1 | |
| NDT 4233 | BOEING STANDARD, 747 PT4 55-10-03: PG7 FIG3, WITH CERT | 1 | |
| NDT 4245 | Boeing Reference Standard, 747 PT4 54-40-25, PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 6001 | Boeing Steel Reference Standard w/certs | 2 | |
| NDT 6005 | Boeing Standard | 2 | |
| NDT 6012 | Boeing Standard, 767, Joint 1, support 1 and 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 6013 | Boeing Standard, 767, Joint 1, support 2 and 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT 6014 | Boeing Standard, 767, Joint 3, support 1 and 8 | 1 | |
| NDT 6015 | Boeing Standard, 767, Joint 3, support 2 and 7 | 1 | |
| NDT 6017 | Boeing titanium reference standard. | 2 | |
| NDT 6018 | Boeing Titanium Reference Standard w/certs | 2 | |
| NDT 6045 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT-102 | Boeing Standard INC 625 customer supplies material | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT-1022 | NDT-1022 BOEING 707 727 737 747 | 3 | |
| NDT-1023 | NDT-1023 BOEING 707 727 737 747 | 2 | |
| NDT-1024 | BOEING REFERENCE STANDARD | 2 | |
| NDT-1025 | NDT-1025 BOEING 707 727 737 747 | 2 | |
| NDT-1026 | NDT-1026 BOEING 707 727 737 747 | 2 | |
| NDT-1027 | NDT-1027 BOEING 707 727 737 747 | 2 | |
| NDT-103 | Boeing Standard AL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT-1086-032 | BOEING REFER STNDRD | 3 | |
| NDT-1086-040 | BOEING REFERENCE STA | 3 | |
| NDT-1086-050 | BOEING REFER STNDRD | 3 | |
| NDT-1086-060 | BOEING REFER STNDRD | 3 | |
| NDT-1086-070 | BOEING REFER STNDRD | 3 | |
| NDT-1086-080 | BOEING REFER STNDRD | 3 | |
| NDT-1086-090 | BOEING REFER STNDRD | 3 | |
| NDT-1086-100 | BOEING REFER STNDRD | 3 | |
| NDT-1086-110 | BOEING REFER STNDRD | 3 | |
| NDT-1086-120 | BOEING REFER STNDRD | 3 | |
| NDT-1088-072-050 | BOEING REFER STNDRD | 3 | |
| NDT-1088-144-050 | BOEING REFERENCE STA | 2 | |
| NDT-1094-40 | REFERENCE STANDARD BOEING 737 | 2 | |
| NDT-1094-40-A | REFERENCE STANDARD BOEING 737 | 2 | |
| NDT-1099F | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT-3004 | BOEING STD 6-53-30-10 | 2 | |
| NDT-3015 | BOEING STD 6-53-30-10 | 1 | |
| NDT-3016-B | BOEING STD 737 6-53-10-54 | 1 | |
| NDT-3023 | BOEING REFERENCE STA | 4 | |
| NDT-3038 | BOEING REFERENCE STA | 4 | |
| NDT-3038-P1 | BOEING TRANDUCER 737 57-50-02 | 3 | |
| NDT-3091 | BOEING REFERENCE STA | 2 | |
| NDT001-767T | Boeing Standard Part 6 53-60-94 pg 5 | 1 | |
| NDT002-767T | Boeing standard 6 52-30-92 Page 7 | 1 | |
| NDT006 | NDT REFERENCE STANDARD BOEING 767 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT007-767T | Boeing Standard Part 6 53-80-93 pg 6 | 1 | |
| NDT009-767T | BOEING STANDARD PART 6 53-80-93 PG 4 | 1 | |
| NDT055 | Boeing Standard 57-10-07 PT6 PG677 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT056 | Boeing Standard 57-10-07 PT6 PG678 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1004 | BOEING STANDARD, 737 PT6 51-00-00 PROCEDURE 14, PG11, FG6, 6AL-4V 787 PT6 51-00-05 PROCEDURE 1, PG10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1016 | BOEING REFERENCE STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1016 3.2-5.5MM | Special Boeing Type Reference Standard, PT6 51-00-00 PG 10, Fig 16 Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1017 | Boeing Standard .250" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
| NDT1018 | BOEING REFERENCE STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT1019 | Boeing Standard .375" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
| NDT1020 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 | 2 | |
| NDT1021 | BOEING REFERENCE STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1022 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT1022-2.0 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1022-27/6 | BOEING REFERENCE STANDARD 767 51-00-14 PT 6 FIG 3, 757 Part 6 51-00-14 Page 8 Figure 3. SINGLE STANDARD WITH ALL SIX HOLES. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1023 | BOEING STANDARD, 787 PT6 51-00-06 PG 6-7 FIG 3, .250" DIAMETER | 2 | |
| NDT1024 | BOEING REFERENCE STANDARD PT 6 51-00-00 | 2 | |
| NDT1025 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16. MATERIAL(6AL-4V) TITANIUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1026 | BOEING REFERENCE STANDARD ALL MODELS PT 6 51-00-00 FIG 16.. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance... | 2 | |
| NDT1027 | BOEING REFERENCE STANDARD ALL MODELS PT 6 51-00-00 FIG 16.. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. .. | 2 | |
| NDT1027-.125 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .125 Hole Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1027-.156 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .156 Hole Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1027-.9125 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, .9125 Hole Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1027-1.420 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, 1.420 Hole Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1027-1.720 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, 1.720 Hole Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1027-1.750 | Boeing Standard, 787 PT6 51-00-06 PG 6-7 FIG 3, 1.750 Hole Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1031 | BOEING 707 REFERENCE STANDARD 707 PART 6, 57-10-07 DETAIL 2 FIGURE 93 SHEET 7 PG.1525. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1033 | BOEING STANDARD, 737 PT 4 51-40-00 FIG 1 PG 6-7, SHEET 1-2, PROCEDURE 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1033-10 | Boeing Standard, 737 PT 4 51-40-00 Fig 1 Pg 6-7, Sheet 1-2, Procedure 1 | 4 | |
| NDT1035 | Boeing Standard, 757 PT6 54-10-02:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1036 | Boeing Standard, 707 PT4 54-40-07 FIG2: PG24 FIG2 SHEET12 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1036-P1 | Boeing Positioner, 707 PT4 54-40-07 FIG2: PG25 FIG2 SHEET13 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1036-P2 | Boeing Positioner, 707 PT4 54-40-07 FIG2: PG25 FIG2 SHEET13 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1036-P4 | Boeing Positioner, 707 PT4 54-40-07 FIG2: PG25 FIG2 SHEET13 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.032 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.036 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.040 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.050 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.063 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.072 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.080 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.090 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.100 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.110 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1037-0.125 | BOEING REFERENCE STANDARD 767 Part 6 51-00-20 Page 7-10 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1038 | BOEING REFERENCE STANDARD (ALUMINUM SKIN/CORE DEFECTS) 737/757 PART 4 51-00-05 PAGE 5-7 FIGURE 1. MATERIAL: ANY 2000, 6000,7000 SERIES ALUMINUM, INCLUDES C-SCAN AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT1039-.016/.016 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.016/.020 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.020/.020 | REFERENCE BOEINGLOCK | 1 | |
| NDT1039-.025/.025 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.032/.032 | REFERENCE BOEINGLOCK | 1 | |
| NDT1039-.032/.032-I625 | Boeing Reference Standard, 757 PT4 51-00-05:PG8 FIG2, Inconel 625 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.036/.036 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.040/.016 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.040/.020 | BOEING REFERENCE STANDARD, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.040/.040 | BOEING REFERENCE STANDARD, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.040/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.050/.032 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.050/.040 | BOEING REFERENCE STANDARD, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.050/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.050/.080 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.063/.056 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.063/.063 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.063/.080 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2.. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.080/.025 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-.080/.063 | BOEING REFERENCE STANDARD, 737 PT4 53-30-01:PG5 FIG2 | 1 | |
| NDT1039-.080/.100 | Boeing Reference Standard 737 PT4 53-30-01 PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.016/0.016 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.020". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.016/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.025". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.016/0.100 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.100". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.020/0.020 | REFERENCE BOEINGLOCK | 1 | |
| NDT1039-0.020/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.025". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.020/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.032". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.025/0.025 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.030/0.030 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.030"/0.030". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.032/0.032 | REFERENCE BOEINGLOCK | 1 | |
| NDT1039-0.032/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.032/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.050". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.036/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.040/0.020 | BOEING REFERENCE STANDARD | 2 | |
| NDT1039-0.040/0.032 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.040/0.036 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.040/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.040/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.040"/0.050". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.040/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.045/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.050/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.050/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.050/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.050/0.080 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.063/0.040 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.063/0.056 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1039-0.063/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.063/0.080 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 PAGE 5 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.071/0.063 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.080/0.025 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.080/0.063 | BOEING REFERENCE STANDARD 737 | 2 | |
| NDT1039-0.080/0.100 | BOEING REFERENCE STANDARD 737 PT 4 53-30-01 FIGURE 2 and 767 PT 4 51-00-05 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-0.52/0.52 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2, T1= .52mm T2=.52mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.0/0.5 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.0/1.0 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.3/1.1 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.3/1.6 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.6/0.5 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.6/1.4 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-1.6/1.6 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-2.0/1.6 | Boeing Reference Standard, 737 PT4 53-30-01:PG5 FIG2, (.080/.063) size in mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1039-T1/T2 | BOEING STANDARD 737 PT4 51-00-05 PG 7..*T1 | 2 | |
| NDT1039-t1/t2 | Boeing Standard 737 PT4 51-00-05 PG 7..*t1 & t2 are material thickness, customer must provide thickness dimensions | 2 | |
| NDT104 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C SHEET8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1040 | BOEING STANDARD 0.188" HOLE, 51-00-00, PT6: FIG.19, PAGE 10, DETAIL III | 2 | |
| NDT1041 | BOEING REFERENCE STANDARD 737 PT6 51-00-00 PROCEDURE 19, 0.250” DIAMETER. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1042 | Boeing Standard 0.313" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1043 | BOEING REFERENCE STANDARD | 2 | |
| NDT1044 | Boeing Standard 0.438" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1045 | Boeing Standard 0.500" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
| NDT1046 | BOEING NDT STANDART | 3 | |
| NDT1046-.032/.050 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, .032 min and .050 max thickness 2024-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-.75/1.5mm | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, .75mm/1.5mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-10-20 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 10 PLY / 20 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-12-24 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 12 PLY / 24 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-12/24 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 12PLY/24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-20-31 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 20 PLY / 31 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-3 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY | 1 | |
| NDT1046-3-10 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 10 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-3-11 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 11 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-3-5 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 5 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3-7 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 7 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3-9 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 9 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3/11 MOD | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 11 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
| NDT1046-3/13 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY/13PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-3/6 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY/6PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-3/7 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 3 PLY/7PLY | 1 | |
| NDT1046-5/9 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 5PLY/9PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1046-6-10 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 6 PLY / 10 PLY. INCLUDES C-SCAN AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1046-6/10 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 6PLY/10PLY | 2 | |
| NDT1046-7/26 | Boeing Standard, ALL PT9 51-00-01:PG6 FIG1, 7PLY/26PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1047 | BOEING 737 REFERENCE STANDARD PART 6 51-00-00 PAGE 5 FIGURE 1. MATERIAL: LOW ALLOY 4000 SERIES STEEL 4130. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT1047A | Boeing Standard, 747 PT6 51-00-00:PG6 FIG22 DETAILI, 7075T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1048 | BOEING REFERENCE STANDARD 51-00-01 PT 6 FIG 5. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT1048-2024T3 | BOEING STANDARD, PT6 51-00-00:PG11 FIG4 DETAIL IV, 2024-T3 ALUMINUM | 1 | |
| NDT1048-4.8/8.7 | Boeing Standard, Multi Hole, Certified to 737 PT6 51-00-00 FIG16 PG10, 7075-T6 w/ .020 x.020 x .005 MAX Width, PN will be NDT1048-4.8 NDT1048-5.1 NDT1048-5.5 NDT1048-6.3 NDT1048-6.7 NDT1048-7.1 NDT1048-7.9 NDT1048-8.3 NDT1048-8.7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1048-7075T6 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 7075-T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT105 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT106 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1061 | BOEING STANDARD, 737 PT6 51-00-00:PG12 FIG13 DETAILV | 2 | |
| NDT1062 | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 24. Includes Test Report and Certificte of Conformance. | 2 | |
| NDT1069-070 | Boeing Standard, 737 PT6 53-30-25:PG14 FIG3 SHEET1, No Feeties, Etching, or Bond NEEDED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A | BOEING STANDARD, 737 PT6 53-30-25:PG14 FIG3 SHEET1 | 1 | |
| NDT1069A-0.010 DEEP | Boeing Standard w/ 0.010 deep notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-0.010 DEEP/.045 SKIN | Boeing Standard, .010 deep notch in .045 (-1 layer) skin, no feeties | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-036-5% | Boeing Standard, .036 thick, 5% IACS from 2024T3 Bare, .5 long x 50% deep notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-036M | Boeing Standard, .036 thick, 2.0 MILLED SECTION, .5 long x 50% deep notch, 2024T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-040 | Boeing Standard, .040 thick, .5 long x 50% deep notch, 2024T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-040-5% | Boeing Standard, .040 thick, 5% IACS from 2024T3 Bare, .5 long x 50% deep notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-045 | Boeing Standard, .045 thick, .5 long x 50% deep notch, 2024T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069A-045-5% | Boeing Standard, .045 thick, 5% IACS from 2024T3 Bare, .5 long x 50% deep notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1069B | Boeing Standard, 737 PT6 53-30-25:PG14 FIG3 SHEET2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT107 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1071 | BOEING REFERENCE STANDARD 767 Part 4 51-00-22 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1072 | BOEING REFERENCE STANDARD PT 6, 51-00-00 fig. 13 PG.11 . MATERIAL-301 1/2 HARD. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1073 | BOEING STANDARD, 747 PT6 51-00-00:PG12 FIG13 DETAILV | 2 | |
| NDT1074 | BOEING REFERENCE STANDARD PART 6 51-00-00 PAGE 11 FIGURE 24. MATERIAL: 304 1/2 HARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1075 | BOEING REFERENCE STANDARD PART 6 51-00-00 PAGE 14 FIGURE 13. MATERIAL: 301 1/2 HARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1077 | Boeing Standard | 1 | |
| NDT108 | Boeing Standard, 707 PT4 57-40-07 FIG2: PG12C FIG2 SHEET8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083 | BOEING REFERENCE STANDARD 757 PART 6 51-00-17 PAGE 7 FIGURE 3. MATERIAL: LOW ALLOY STEEL, SUCH AS,43304340. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT1083-.157 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.188 | Boeing Standard 757 PT6 51-00-17 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.250 | Boeing Standard 757 PT6 51-00-17 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.313 | Boeing Standard 757 PT6 51-00-17 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.375 | Boeing Standard 757 PT6 51-00-17 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.438 | Boeing Standard 757 PT6 51-00-17 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.500 | Boeing Standard 757 PT6 51-00-17 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.5625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.625 | Boeing Standard 757 PT6 51-00-17 PG 7 | 1 | |
| NDT1083-.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.750 | Boeing Standard 757 PT6 51-00-17 PG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.851 | Boeing Standard .851 PT6 51-00-00:FIG19 PG10 DetailIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-.875 | Boeing Standard 757 PT6 51-00-17 PG6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.5620 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.563 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.625 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.630 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.688 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.695 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.750 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.787 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.812 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-0.813 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.875 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-0.938 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.00 | Boeing Standard 1.0", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-1.000 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | 1 | |
| NDT1083-1.1875 | Boeing Standard 1.1875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-1.19 | Boeing Standard 1.19", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-1.25 | Boeing Standard 1.25", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-1.286 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-1.347 | BOEING REFERENCE STANDARD 757 Part 6 51-00-17 Page 7 Figure 3. Material: Low Alloy Steel, Such as,4330 or 4340. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom Hole Size and Procedure. Includes Test Report and Cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083-3.2/8.7 | REFERENCE STANDARD BOEING 12 HOLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.157 | Boeing Reference Standard 0.157" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.219 | Boeing Reference Standard 0.219" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.282 | Boeing Reference Standard 0.282" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.344 | Boeing Reference Standard 0.344" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.407 | Boeing Reference Standard 0.407" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.469 | Boeing Reference Standard 0.469" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.516 | Boeing Reference Standard 0.516" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.5625 | Boeing Standard 0.5625", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.563 | Boeing Standard 0.563", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.625 | Boeing Standard 0.625", 737/747 PT6 51-00-00:FIG19 PG10 Detail III or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
| NDT1083.6875 | Boeing Standard 0.6875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.750 | Boeing Standard 0.750", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1083.875 | Boeing Standard 0.875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-.0563 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0563" HOLE DIAMETER | 1 | |
| NDT1084-.0625 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0625" HOLE DIAMETER | 1 | |
| NDT1084-.0688 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0688 HOLE DIAMETER | 1 | |
| NDT1084-.0750 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0750 HOLE DIAMETER | 1 | |
| NDT1084-.096 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.125 | Boeing Standard .125 hole 737/747 PT 6 51-00-00 PH10 FIG 16 DETAIL III | 1 | |
| NDT1084-.129 | Boeing Standard 767 Part 6 51-00-16 page 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.156 | Boeing Standard .156" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.156/.5 | Boeing Standard, 18 holes, 2 columns, 1 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, .156, .171, .1875, .203, .218, .25, .265, .281, .312, .328, .343, .375, .39, .406, .437, .453, .468, .5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.156/.5-1 | Boeing Standard, 18 holes, 4 columns, 3 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, .156, .171, .1875, .203, .218, .25, .265, .281, .312, .328, .343, .375, .39, .406, .437, .453, .468, .5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.157 | BOEING STANDARD .157" HOLE, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.161 | Boeing Standard 767 PART6, 51-00-16..page 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.218 | Boeing Standard .218: Hole,737/747 PT6 51-00-00: PG 10 FIG 16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.265 | Boeing Standard 767 Part 6 51-00-16 page 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.281 | Boeing Standard 767 Part 6 51-00-16 Page 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.531 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.546/.937-1 | Boeing Standard, 8 holes, 4 columns, 3 with notches and 1 without, 2024-T3, 737/747 PT6 51-00-00: PG8 FIG3 Procedure 16, 35/64, 37/64, 41/64, 11/16, 49/64, 13/16, 7/8, 15/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.562 | Boeing Standard .562" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.5625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.563 | BOEING STANDARD .563" HOLE, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.625 | BOEING STANDARD, .625" HOLE, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.688 | Boeing Standard, .688" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
| NDT1084-.689 | Boeing Standard, .689" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-.750 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII .750" hole diameter | 1 | |
| NDT1084-.813 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084-.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII .875" hole diameter | 1 | |
| NDT1084-.938 | BOEING REFERENCE STANDARD, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084-0.09375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.122 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.125 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE | 1 | |
| NDT1084-0.127 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.129 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.156 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE 9 FIGURE 3, 777 PART 6 51-00-02 PAGE 7 FIGURE 3,777-200/300 PART 6 51-00-02 PAGE 9 FIGURE 3. MATERIAL: 2024-T3. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. PROVIDE CUSTOM | 1 | |
| NDT1084-0.157 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.161 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.218 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.219 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.234 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.265 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.281 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.297 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.328 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.359 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.391 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.422 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.453 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.469 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.484 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.531 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.562 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.563 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.578 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.594 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.600 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.630 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.640 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.656 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.675 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.688 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.689 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.695 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.700 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.719 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.750 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | 1 | |
| NDT1084-0.787 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.813 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.875 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.906 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.938 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0.XXX | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-0125 | BOEING REFERENCE STANDARD 737 PART 6 51-00-00 PAGE 9 FIGURE 3, 777 PART 6 51-00-02 PAGE 7 FIGURE 3,777-200/300 PART 6 51-00-02 PAGE 9 FIGURE 3. MATERIAL: 2024-T3. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. PROVIDE CUSTOM | 1 | |
| NDT1084-1.00 | BOEING REFERENCE STANDARD, PT6 51-00-00: FIG16 PG10 DETAILIII 1.0" HOLE DIAMETER | 1 | |
| NDT1084-1.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.062 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.100 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.124 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.125 | BOEING REFERENCE STANDARD, PT6 51-00-00: FIG16 PG10 DETAILIII 1.125" HOLE DIAMETER | 1 | |
| NDT1084-1.187 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.200 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.300 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.312 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.3605 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.375 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.390 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.390" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.400 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.420 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.420" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.437 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.500 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.500" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.590 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.590" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.625 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.750 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 1.75" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.750-7075T6 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 7075T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.795 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.795" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.875 | BOEING REFERENCE STANDARD, PT6 51-00-00: FIG16 PG10 DETAILIII 1.875" HOLE DIAMETER | 1 | |
| NDT1084-1.940 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.985 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.985" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-1.9855 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-11.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-14.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-14.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-17.4MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-17.5MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-2.00 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 2.0" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-2.000 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-2.250 | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-2.650 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 2.650" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-27.6MM | BOEING REFERENCE STANDARD 737 Part 6 51-00-00 Page 9 Figure 3, 777 Part 6 51-00-02 Page 7 Figure 3, or 777-200/300 Part 6 51-00-02 Page 9 Figure 3. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Provide Custom | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-3.2/8.7 | REFERENCE STANDARD BOEING 12 HOLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084-600 | BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 | 1 | |
| NDT1084-7MM | Boeing Standard 767 Part 6 51-00-16 page 7, 7mm Diameter Hole | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.125 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.156 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.157 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.158 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.188 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.195 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.218 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.219 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.245 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.250 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.275 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.281 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.282 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.297 | Boeing Reference Standard, 19/64" Hole, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.313 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.343 | Boeing Reference Standard, 11/32" Hole, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.344 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.407 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.469 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.500 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.531 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.547 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.562 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1084.625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.688 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.750 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1084.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
| NDT1085-032 | BOEING STANDARD, 737/747 PT6 53-30-23:PG8 FIG2, .032" TOP LAYER | 3 | |
| NDT1085-036 | BOEING REFERENCE STANDARD | 3 | |
| NDT1085-050 | BOEING STANDARD, 737/747 PT6 53-30-23:PG8 FIG2, .050" TOP LAYER | 2 | |
| NDT1085-063 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-071 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-080 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-090 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-100 | Boeing Standard, 737/747 PT6 53-30-23:PG8 FIG2, .100" Top Layer | 2 | |
| NDT1085-112 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1085-125 | BOEING REFERENCE STANDARD 767 PT 6 53-00-10, 737 PART 6 53-30-23. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1086-032 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 and 737 53-30-05. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1086-040 | BOEING REFERENCE STA | 3 | |
| NDT1086-050 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-060 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-070 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 73 | 3 | |
| NDT1086-080 | BOEING STANDARD, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-090 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT1086-1.286 | Boeing Standard, 737 PT4 53-30-05:PG10 FIG2, 1.286" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1086-100 | BOEING STANDARD, 737 PT4 53-30-05:PG10 FIG2 | 3 | |
| NDT1086-110 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 73 | 3 | |
| NDT1086-120 | BOEING REFERENCE STANDARD 767 PT 4 53-00-01 AND 737 53-30-05. | 3 | |
| NDT1086-130 | Boeing Standard, 737 PT4 53-00-01: Pg 8 Fig 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1086-140 | Boeing Standard, 737 PT4 53-00-01:PG8 FIG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1087-1 | BOEING REFERENCE STANDARDS | 4 | |
| NDT1087-10 | BOEING STANDARD 757 PT6 53-00-11 PG 7-10 FG 2-3 (D634N301) .120" UPPER SHEET - .080" LOWER SHEET, W | 2 | |
| NDT1087-11 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.080. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-12 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.120 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-13 | BOEING REFERENCE STANDARD, 757 PART 6 53-00-11. PLATE THICKNESS: UPPER 1 - 0.140 / LOWER 2 - 0.063. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT1087-14 | BOEING REFERENCE STANDARDS | 3 | |
| NDT1087-2 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 | 3 | |
| NDT1087-3 | BOEING REFERENCE STANDARDS | 3 | |
| NDT1087-4 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .090" over .040" | 3 | |
| NDT1087-5 | Boeing Dual Frequency Standard, .100" Upper sheet - .050" Lower sheet | 2 | |
| NDT1087-6 | Boeing Dual Frequency Standard, .071" Upper sheet - .063" Lower sheet | 2 | |
| NDT1087-7 | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 | 2 | |
| NDT1087-8 | Boeing Dual Frequency Standard, .100" Upper sheet - .090" Lower sheet | 2 | |
| NDT1087-9 | BOEING REFERENCE STANDARD,. INCLUDES CERTIFICATION REPORT. | 2 | |
| NDT1087-P1 | BOEING DUAL FREQUENCY STANDARD ACRYLIC GUIDES (PAIR) | 3 | |
| NDT1087-R&D | Boeing Standard w/ 12 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1087-R&D V2 | Boeing Standard w/ 9 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-036X2/050-B | Boeing Reference Standard, Bare, Drawing Provided | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-036X2/050-C | Boeing Reference Standard, Drawing Provided | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-050/063 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-060/050 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-062/071 | Boeing Standard, 757/767 PT6 53-00-13:PG7 FIG3, 747 PT6 53-30-17:PG6 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-072-050 | BOEING REFERENCE STA | 3 | |
| NDT1088-072/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 3 | |
| NDT1088-095/071 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-112/100 | Boeing Standard, 757/767 PT6 53-00-13:PG7 FIG3, 747 PT6 53-30-17:PG6 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-120/050 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-133/071 | Boeing Standard, 747 PT6 53-30-17:PG11 FIG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-144-050 | BOEING REFERENCE STA | 2 | |
| NDT1088-144/050 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | 2 | |
| NDT1088-156/100 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-180/180 | BOEING REFERENCE STANDARD 737 Part 6 53-30-24 Page 6 Figure 2, 747 Part 6 53-30-17 Page 7 Figure 1, 757 Part 6 53-00-13 Page 6 Figure 2. Material: 2024-T3. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-250/250 | Boeing Standard, Drawing Provided, Figure 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-E | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1088-F | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-.500 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-.656 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII .656 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1089-0.125 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16,BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.125" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.157 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø0.157" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.563 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance.Hole Ø 0.563" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.600 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. HOLE SIZE: 0.600". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.625 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.625" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.626 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.626" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.656 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.660 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.688 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.688" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.750 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.750" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.813 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.813" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.875 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.875" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-0.938 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 0.938" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.00 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.0 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.000 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. Hole Ø 1.000" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.25 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.25 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.375 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16, MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.438 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.438 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.500 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.5" Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-1.9855 | BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, PT 6 51-00-00 FIG 16. MATERIAL(6AL-4V) TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1089-4.8/15.5 | Boeing Standard 737/767 PT6 51-00-00:PG 7 FG 3 Procedure 17, 22 Hole Std, 4.8mm, 5.1mm, 5.5mm, 6.3mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm, 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm,12.5mm, 13mm, 13.5mm, 14mm, 14.5mm, 15mm, 15.5mm with .050 corner notc... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1091 | Boeing Standard, PT6 51-00-00:PG7 FIG15 DETAIL I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1092-.040/.016 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .040/.016. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1092-.040/.032 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .040/.32. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1092-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2, .050/.040. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1092-.071/.056 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .071/.056. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1092-.080/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2 .080/.040. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1093-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .050"/.040" thicknesses. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1093-.071/.056 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .071"/.056" thicknesses. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1093-.080/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-040 | BOEING STANDARD, 737/747 PT4 53-00-02 PG 22 FIG2, .072" TOP PLATE .040" BOTTOM PLATE | 2 | |
| NDT1094-040-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-040A | BOEING STANDARD, 737/747 PT4 53-30-06:PG25 FIG2, .072" TOP PLATE .040" BOTTOM PLATE | 2 | |
| NDT1094-050 | BOEING STANDARD, 737/747 PT4 53-00-02 PG22, FIG2, .072" TOP PLATE .050" BOTTOM PLATE | 2 | |
| NDT1094-050-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050/010-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-050A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .050" bottom plate | 2 | |
| NDT1094-070 | BOEING STANDARD, 737/747 PT4 53-00-02 PG22, FIG2, .072" TOP PLATE .070" BOTTOM PLATE | 1 | |
| NDT1094-070-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-070A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .070" bottom plate | 2 | |
| NDT1094-090 | BOEING STANDARD, 737/747 PT4 53-00-02 PG 22, FIG2, .072" TOP PLATE .090" BOTTOM PLATE | 2 | |
| NDT1094-090-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090A | BOEING STANDARD, 737/747 PT4 53-30-06:PG25 FIG2, .072" TOP PLATE .090" BOTTOM PLATE | 2 | |
| NDT1094-110 | Boeing Standard, 737/747 PT4 53-00-02 PG 22, FIG2, .072" top plate .110" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-110-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT1094-110A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .110" bottom plate | 2 | |
| NDT1094-130 | Boeing Standard, 737/747 PT4 53-00-02 PG 22, FIG2, .072" top plate .130" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-130-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-130A | BOEING STANDARD, 737/747 PT4 53-30-06:PG25 FIG2, .072" TOP PLATE .130" BOTTOM PLATE | 2 | |
| NDT1094-155 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .155" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-155-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT1094-155A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .155" bottom plate | 2 | |
| NDT1094-185 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-185-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT1094-185A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .185" bottom plate | 2 | |
| NDT1094-215 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-215-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT1094-215A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .215" bottom plate | 2 | |
| NDT1094-245 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .245" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-245-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-245A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .245" bottom plate | 2 | |
| NDT1094-250 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .250" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-275 | Boeing Standard, 737/747 PT4 53-00-02 PG22, FIG2, .072" top plate .275" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-275-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-275A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .275" bottom plate | 1 | |
| NDT1094-300 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-300-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1094-300A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .300" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1095 | Boeing Standard, 777 PT 6 53-00-10 Pg 8 Fig 1 | 2 | |
| NDT1096-040 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-040-A | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-050 | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-050-A | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-070 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-070-A | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-090 | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-090-A | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-110 | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-110-A | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-130 | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-130-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-155 | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-155-A | BOEING REFERENCE STANDARD 757,767, 777 PART 4 53-00-03 and PART 4 53-30-08 707,727,737,747. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-185 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-185-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-215 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-215-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | 1 | |
| NDT1096-245 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-245-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-275 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-275-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-300 | Boeing Standard 777 PT4 53-00-03 PG 23-24 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1096-300-A | Boeing Standard 767 PT4 53-00-03 PG 25-26 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1097-A | BOEING REFERENCE STANDARD PT 6 53-30-25 FIG 2. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT1097-B | BOEING REFERENCE STANDARD PT 6 53-30-25 FIG 2. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT1097-C | BOEING REFERENCE STANDARD PT 6 53-30-25 FIG 2. Includes Certification Report and Certificate of Conformance. | 2 | |
| NDT1098-1 | Boeing Step Wedge | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099 | BOEING REFERENCE STA | 4 | |
| NDT1099-.014-CLAD | Boeing Standard, .023 DEEP Pocket in .063 CLAD ALUMINUM, .014 notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099-063/050/025 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099-071/040/020 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099-072/036/014 | Boeing Standard, .036 DEEP Pocket in .072 CLAD ALUMINUM, .014 notch, with 6 ea rubber feet | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099-080/063/032 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099-BBB | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099-E | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099.010-BARE | Boeing Standard, .031 DEEP Pocket in .063 ALUMINUM, .010 notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099.010-CLAD | Boeing Standard, .031 DEEP Pocket in .063 CLAD ALUMINUM, .010 notch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1099F-P1 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-100 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-100-ABS | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-200 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-200-ABS | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-300 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-300-ABS | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-400 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-400-ABS | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-500 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-500-ABS | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-600 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-600-ABS | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-CFRP-100-ABS-100 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-CFRP-200-ABS-200 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-CFRP-300-ABS-300 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-CFRP-400-ABS-400 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-CFRP-500-ABS-500 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1100-CFRP-600-ABS-600 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-100-MB | Boeing Standard, .100 over .050, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-100-MR | Boeing Standard, .100 over .050 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-100-NMR | Boeing Standard, .100 over .050 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-160-MB | Boeing Standard, .160 over .080, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-160-MR | Boeing Standard, .160 over .080 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-160-NMR | Boeing Standard, .160 over .080 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-200-MB | Boeing Standard, .200 over .100, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-200-MR | Boeing Standard, .200 over .100 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-200-NMR | Boeing Standard, .200 over .100 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-250-MB | Boeing Standard, .250 over .125, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-250-MR | Boeing Standard, .250 over .125 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-250-NMR | Boeing Standard, .250 over .125 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-300-MB | Boeing Standard, .300 over .150, Magnetic Steel Bolts such as BACB30NE or BACB30NF or equiv | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-300-MR | Boeing Standard, .300 over .150 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1101-300-NMR | Boeing Standard, .300 over .150 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1102-100 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1102-200 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1102-300 | Boeing Standard 787 PT6 51-00-11 PG 5-6 FG 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1102-400 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1102-500 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1102-600 | BOEING REFERENCE STANDARD 787 Part 6 51-00-11 Page 5 Figure 1. Material:Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1106 | BOEING REFERENCE STANDARD 737 PT. 4; 51-00-05 PG.5 | 2 | |
| NDT1106-1 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 With top plate thickness of .060", .080" .100".. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT112 | Boeing Standard, 707 PT6 57-10-07 FIG82: PG1424 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT113 | Boeing Standard, 707 PT6 57-10-07 FIG78: PG1404 FIG78 SHEET6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT125 | Boeing Standard, 767 PT6 51-00-05 FIG2: PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT126 | BOEING REFERENCE STANDARD PT 6 51-00-01 FIG 4. INC | 1 | |
| NDT128 | Boeing Standard, 767 PT6 51-00-06 FIG1: PG4 *Customer needs to provide angle and material type | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT131 | Boeing Standard, 707 PT4 53-10-07 FIG2: PG9 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT132 | Boeing Standard, 707 PT4 53-10-07 FIG3: PG19 SHEET8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT133 | Boeing Standard, 707 PT4 53-40-07:PG5 FIG1 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT134 | Boeing Standard, 707 PT4 53-40-07:PG12 FIG2 SHEET6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT135 | Boeing Standard, 707 PT4 53-10-07 FIG4: PG23 SHEET4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT138 | Boeing Standard, 707 PT4 32-20-07, FIG2: PG9, Sheet7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT139 | Boeing Standard, 707 PT4 32-20-07, FIG2: PG11, Sheet9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT150 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT151 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT152 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT153 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT154 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT155 | Boeing Standard, 707 PT4 54-40-07 FIG1: PG5 SHEET5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT185 | Boeing Standard, 747 PT6 51-00-00:PG11 FIG13 DETAIL IV or CASA CN235 PT1 51-30-05 PG10 FG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT189 | BOEING STANDARD,737 PT6 51-00-00:PG13 FIG4 DETAIL | 2 | |
| NDT192 | Boeing Standard, 737 PT6 51-00-00:PG14 FIG13 DETAIL VII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT194 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG3 Procedure 3, 5/32 and 3/16 holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT194A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT194B | BOEING REFERENCE STANDARD PT 6 53-30-02. SHEET 1 | 2 | |
| NDT194C | BOEING REFERENCE STANDARD 737 PART 6 53-30-00 PAGE 10 FIGURE 6. MATERIAL: 2024-T3T4 CLAD ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT200 | Boeing Standard. 727; PT6; 28-10-27; PG7; FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2001 | BOEING 737 PT 4 28-10-01 PG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2009 | BOEING REFERENCE STANDARD 727 Part 4 57-10-27 Page 10 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2015 | BOEING REFERENCE STANDARD 727 PT 4 54-30-27. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2016 | BOEING REFERENCE STANDARD 727 Part 6 54-40-27 Page 5 Figure 1. Material: 6AL-4V and 4130, 4330, or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2017 | Boeing Standard, 727 PT4 57-10-27:PG25 FIG3 SHEET7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2019 | BOEING REFERENCE STANDARD 727 PT 6 57-40-27 DETAIL II. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2024 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2025 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2026 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2027 | BOEING REFERENCE STANDARD 727 Part 6 53-30-27 Page 4 Figure 1. Material: 2024-T3 or T4 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2028 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2029 | Boeing Standard, 727 PT6 53-30-27:PG168 FIG22 SHEET6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2031 | BOEING REFERENCE STANDARD 727 PART 6 55-30-27 FIGURE 3 PAGE 22. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2032-A | BOEING STANDARD 727 PT6 57-10-28 PG 7 FG 2 | 1 | |
| NDT2032-BSIDE | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2032-V3 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT2033 | BOEING REFERENCE STANDARD, 727 PART 6 57-53-03 FIGURE 2 PAGE 6. MATERIAL:4340M OR 4330M STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT206 | Boeing Standard, 727 PART6 57-10-27 PAGE 201, FIG 40 Sheet 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT208 | Boeing Standard, 727 PART6 57-10-27 PAGE 202, FIG 19 Sheet 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT240 | Boeing Standard 727 57-10-27 PT6 page 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT248 | Boeing Standard, 727 PART4 53-10-27 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT251 | Boeing Standard, 727 PT6 57-30-27:PG30 FIG3 SHEET6, engrave per drawing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT253 | Boeing Standard, 727 PART4 53-10-27 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT262 | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig 11 Sheet 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT263 | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig6, Page 29 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT272 | Boeing Standard..727 PART6 55-10-27 PAGE 13, FIG 2 Sheet 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT291 | Boeing Standard 727 54-40-27 PART 6 page 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT295 | Boeing Standard PT4 53-30-27 page 13 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT297 | Boeing Standard, 727 PT4 32-30-27:PG38 FIG5 SHEET10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT298 | BOEING REFERENCE STANDARD 727 PART 4 32-30-27 PROCEDURE 5 PAGE 11 FIGURE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT298PL | BOEING TRANSDUCER POSITIONER 727 PART 4 32-30-27 PROCEDURE 5 PAGE 9 FIGURE 1. Includes Test Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT298PR | BOEING TRANSDUCER POSITIONER 727 PART 4 32-30-27 PROCEDURE 5 PAGE 8 FIGURE 1. Includes Test Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3001 | BOEING REFERENCE STANDARD 737 PART 4 53-10-02 PAGE 8 FIGURE 2. MATERIAL: 2024-T37075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3004 | BOEING REFERENCE STANDARD PART 6 53-30-10 FIGURE 2 (SHEET1&2) PAGE 9&10. | 2 | |
| NDT3005 | BOEING REFERENCE STANDARD 737 Part 6 53-30-13 Page 5 Figure 1. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3008 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3009 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3010 | BOEING REFERENCE STANDARD 737 Part 6 54-40-01 Page 9 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3011 | BOEING REFERENCE STANDARD 737 Part 6 53-30-10 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3012 | BOEING REFERENCE STANDARD 737 Part 4 53-10-03 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3014-A | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3014-B | BOEING REFERENCE STANDARD 737 Part 4 27-00-01 Page 13 Figure 5. Material: 7075-T6 or T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3014A | Boeing Standard, 737 PT4 27-00-01:PG13 FIG5, Not Chrome Plated | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3014B | Boeing Standard, 737 PT4 27-00-01:PG13 FIG5, Chrome Plated | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3015 | BOEING STANDARD 737 PT6 53-30-15:PG8 FIG2 | 1 | |
| NDT3019 | Boeing standard 727 PT6 53-30-27 PG 115 FIG 17 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3019 R&D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3020P1 | Boeing Standard, 737 PT6 57-30-06:PG8 FIG4 | 2 | |
| NDT3021 | BOEING REFERENCE STANDARD, Part 4 57-50-01 Page 8 Figure 2. Includes Test Report and Certificate of Conformance. | 6 | |
| NDT3023 | BOEING REFERENCE STANDARD, 737 PT4 32-10-03:PG11 F | 4 | |
| NDT3024A | Boeing Standard, 737 PT4 53-10-04: PG8 FIG3 | 1 | |
| NDT3030 | BOEING REFERENCE STANDARD, 737 PT4 57-10-01: PAGE 5, FIGURE 2 | 2 | |
| NDT3038 | BOEING REFERENCE STA | 4 | |
| NDT3038-P1 | BOEING TRANSDUCER POSITIONER 737 57-50-0 | 3 | |
| NDT3039 | BOEING REFERENCE STANDARD 737 53-30-04 PT 4 FIG 2 SHEETS 1&2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3041 | BOEING STANDARD, 737 PT6 57-50-15:PG67 FIG2 | 1 | |
| NDT3043 | Boeing Standard, 737 PT4 57-50-03:PG13 FIG 2 | 1 | |
| NDT3044 | Boeing Standard, 737 PT4 57-50-03:PG14 FIG 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3045 | Boeing Standard, 737 PT6 57-50-18:PG6 FIG2 | 1 | |
| NDT3046 | Boeing Standard, 737 PT4 53-20-01:PG5 FIG1 | 1 | |
| NDT3047 | Boeing Standard, 737 PT6 53-10-62: PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3048 | Boeing Standard, 737 PT6 53-10-56: PG9 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3048D | BOEING REFERENCE STANDARD 737 PART 6 53-10-56 FIGURE 4. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3049 | Boeing Standard, 737 PT6 53-10-67:PG21 FIG2 | 1 | |
| NDT3050 | Boeing Standard, 737 PT6 53-30-20: PG6 FIG2 | 3 | |
| NDT3052 | Boeing Standard, 737 PT6 57-10-25: PG9 FIG2 | 1 | |
| NDT3053 | Boeing Standard, 737 PT6 53-30-21: PG6 FIG2 | 1 | |
| NDT3054 | Boeing Standard, 737 PT4 57-10-04:PG12 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3062 | BOEING REFERENCE STANDARD 737 Part 4 57-10-02 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3065 | BOEING REFERENCE STANDARD 767 PT 6 53-00-12 FIG 2.707, 727, 737, 747 AIRCRAFTS; PART 6, 53-30-22. ON 737 AIRCRAFT; PART 4, 53-30-06. ON 757, 767 AIRCRAFTS; PART 6, 53-00-09. ON 777 AIRCRAFT; PART 6,53-00-07. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORM | 3 | |
| NDT3065-STL | BOEING REFERENCE STANDARD 777 PART 6 53-00-07 PAGE 8 FIGURE 3. MATERIAL: ALUMINUM AND 301 1/2 HARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3068 | Boeing Standard, 737, 52-10-02, PT4, FIG2, PG7 | 5 | |
| NDT3070 | Boeing Standard 737 FIG 2 PG 19 57-10-06 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3071 | Boeing Standard, 737 PT6 53-10-65: PG11 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3071A and NDT3071B | BOEING REFERENCE STANDARD 737 Part 6 53-10-65 Page 11 Figure 2. Material: 2024-T3 Bare or Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3073 | BOEING REFERENCE STANDARD 737 Part 6 57-10-31 Page 8 Figure 2. Material: 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3075 | BOEING REFERENCE STANDARD 727 Part 6 53-30-26 Page 7 Figure 2. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3077 | BOEING REFERENCE STANDARD 737 Part 6 53-10-69 Page 13 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3078 | Boeing Standard, 737 PT6 53-10-38:PG9 FIG4 | 1 | |
| NDT3080 | Boeing Standard, 737 PT4 55-30-02:PG8 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3080-A | Boeing Reference Standard, .700 x .350 Thumbnail | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3080-B | BOEING REFERENCE STANDARD 737 Part 4 737 55-30-02 Page 11 Figure 4. Material:2024-T3,7075 or 7075. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3081 | Boeing Standard, 737 PT4 55-10-01:PG11 FIG4 | 1 | |
| NDT3082-1.44 | Boeing Standard, 737 PT6 53-10-70:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3082A | BOEING REFERENCE STANDARD 737 PT 6 53-10-70. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3082B | BOEING REFERENCE STANDARD 737 PT 6 53-10-70. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3082C | BOEING REFERENCE STANDARD 737 PT 6 53-10-70. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3083 | Boeing Standard, 737 PT4 55-10-03:PG14 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3085A | Boeing Standard, 737 PT6 57-10-32: FIG3 PG10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3085B | Boeing Standard, 737 PT6 57-10-32: FIG3 PG10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3085C | Boeing Standard, 737 PT6 57-10-32: FIG3 PG10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3086A | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3086B | Boeing Standard, 737 PT6 57-10-32: FIG3 PG09 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3086C | BOEING REFERENCE STANDARD 737 Part 6 57-10-32 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3089 | Boeing Standard, 737 PT6 52-30-01:PG9 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3090A | Boeing Reference Standard, 737 PT6 53-10-52:FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3090B | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 8 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3090C | BOEING REFERENCE STANDARD 737 Part 6 53-10-52 Page 8 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3091 | Boeing Standard, 747 PT6 53-30-20:PG6 FIG2 | 2 | |
| NDT3092 | Boeing Standard, 737 PT4 53-10-05:PG8 | 2 | |
| NDT3093 R&D | Boeing Standard, 301 1/2H (.063) over 2024T3 Multistack | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3094 | Boeing Standard 737 PT4 55-10-11 PG5 FG2 | 2 | |
| NDT3095 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3096 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3097 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3098 | BOEING REFERENCE STANDARD 737 Part 4 55-10-07 Page 6 Figure 2. Material: Ti-6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3099 | BOEING REFERENCE STANDARD 737 PART 4 55-10-06 PAGE | 2 | |
| NDT3100 | BOEING REFERENCE STANDARD 737 PT 4 55-10-08. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3101 | BOEING REFERENCE STANDARD 737 PT 4 55-10-12 FIG 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3102 | BOEING STANDARD 737 PT4 55-10-10 PG7 FG2 | 1 | |
| NDT3104 | BOEING REFERENCE STANDARD 737 PT 4 55-10-04 FIG 2. | 2 | |
| NDT3105 | Boeing Standard 737 PT4 55-10-15 PG7 FG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3106 | BOEING REFERENCE STANDARD 737 PT 6 55-10-30 FIG 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3107 | Boeing Standard 737 PT4 55-10-09 PG7 FG2 | 1 | |
| NDT3109 | BOEING STANDARD 737 PT4 53-80-01 PG7 FG2 | 1 | |
| NDT3111 | BOEING STANDARD 737 PT4 55-10-05 PG8 FG2 | 1 | |
| NDT3112 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3113 | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3114 | BOEING REFERENCE STANDARD 737 PART 6 53-30-31 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3115 | BOEING REFERENCE STANDARD 737 PART 6 53-30-31 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3116 | BOEING STANDARD, 737 PT4 53-10-06 PG 9 FG 2 | 2 | |
| NDT3117 | BOEING REFERENCE STANDARD 737 Part 5 54-40-03 Page 7 Figure 2. Material: 4330M or 4340M and 6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3118 | BOEING REFERENCE STANDARD 737 Part 6 52-30-01 Page 10 Figure 3. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3118/MF | Boeing Reference Standard, 737 PT6 52-30-01:FIG3 PG6, BACB30FN6-2 or -3 fastners | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3119 R&D | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT312 | BOEING STANDARD, 737 PT6; 53-10-17; PG6; FG2 | 1 | |
| NDT3120 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3121 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3122 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3123 | BOEING REFERENCE STANDARD 737 PART 4 55-10-20 PAGE 15 FIGURE 3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3124 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3125 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3125P | BOEING 737 TRANSDUCER POSITIONER, PART 4 55-10-25 FIGURE 5 PAGE 21. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3126 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3126P | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3127 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3129 | BOEING REFERENCE STANDARD Part 6 53-30-38 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT313 | Boeing Standard, 737 PT6; 53-10-17; PG7; FG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3130 | BOEING REFERENCE STANDARD 737, PART 6 53-30-37 PAGE 8 FIGURE 2. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3131 | BOEING REFERENCE STANDARD 737 Part 6 53-11-10 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3132 | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3132B | BOEING REFERENCE STANDARD 737 Part 6 53-11-18 page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3133 | BOEING REFERENCE STANDARD 737 PART 6 53-11-16 PAGE | 2 | |
| NDT3134 | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3136 | Boeing Standard 737 PT4 55-10-14 PG7 FG2 | 1 | |
| NDT3137 | Boeing Standard | 1 | |
| NDT3139 | Boeing Standard 737 PT4 53-10-07 PG6 FG2 | 1 | |
| NDT3140 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3141 | BOEING REFERENCE STANDARD 737 PART 4 55-10-13 PAGE | 2 | |
| NDT3141G1 | BOEING TRANSDUCER GUIDE 737 Part 4 55-10-13 Page 9 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3142 | BOEING REFERENCE STANDARD 737 Part 6 53-11-08 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3143 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3144 | BOEING STANDARD | 2 | |
| NDT3145 | Boeing Standard | 2 | |
| NDT3146 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 8 Figure 4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3147 | Boeing Standard | 1 | |
| NDT3148 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3149 | BOEING REFERENCE STANDARD 737 PART 6 53-30-41 PAGE | 2 | |
| NDT315 | Boeing Standard, 737 PT4 55-30-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3150 | Boeing Standard 737 PT6 55-10-42 PG 7 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3151 | Boeing Standard | 1 | |
| NDT3152- H | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-55 Page 8 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3152-B | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-BOEING | BOEING REFERENCE STANDART | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3152-C | BOEING STANDARD 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-D | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-E | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-F | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152-G | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-H | BOEING REFERENCE STANDARDS | 3 | |
| NDT3152-I | BOEING REFERENCE STANDARD 737 PART 6 57-10-55 PAGE 8 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3152-J | Boeing NG Ref Standard | 3 | |
| NDT3152-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2 | 3 | |
| NDT3152A-K | Boeing Standard 737 PT6 57-10-55 PG 8 FG 2, NDT3152A THRU K | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3153-A | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-B | BOEING REFERENCE STANDARD 737 PART 6 57-10-54 PAGE | 3 | |
| NDT3153-BOEING | BOEING REFERENCE STANDART | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3153-C | Boeing NG Ref Standard | 3 | |
| NDT3153-D | BOEING REFERENCE STANDARD 737 PART 6 57-10-54 PAGE | 3 | |
| NDT3153-E | BOEING REFERENCE STANDARD 737 PART 6 57-10-54 PAGE | 3 | |
| NDT3153-F | BOEING REFERENCE STANDARD 737 PART 6 57-10-54 PAGE 6 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3153-G | BOEING STANDARD 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153-H | BOEING REFERENCE STANDARDS | 3 | |
| NDT3153-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2 | 3 | |
| NDT3153A-J | Boeing Standard 737 PT6 57-10-54 PG 6 FG 2, NDT3153A THRU J | 1 | |
| NDT3155 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3156 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 4 | |
| NDT3157 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE | 4 | |
| NDT3159 | BOEING REFERENCE STANDARD 737 Part 6 57-10-60 Page 11 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 4 | |
| NDT316 | Boeing Standard, 737 PT4 55-30-01:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3161 | BOEING STANDARD 737 PT6 57-10-60 PG 11 FG 2 | 3 | |
| NDT3162 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE | 4 | |
| NDT3163 | Boeing Standard 737 PT6 57-10-60 PG 11 FG 2 | 2 | |
| NDT3164 | BOEING REFERENCE STANDARD 737 PART 6 57-10-60 PAGE 11 FIGURE 2. MATERIAL: 7150-T7. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3166-001 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3166-002 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3166-003 | BOEING STANDARD 737 PT4 57-10-07 PG 8 FG 2 | 3 | |
| NDT3166-004 | BOEING REFERENCE STANDARD 737 PART 4 57-10-08 PAGE 6 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3166-005 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3166-006 | BOEING STANDARD, 737 PT4 57-10-14 PG 5 FG 2 | 4 | |
| NDT3166-007 | BOEING STANDARD 737 PT4 57-10-08 PG 6 FG 2 | 4 | |
| NDT3167-A | BOEING REFERENCE STANDARD 737 PART 6 57-10-58 PAGE | 3 | |
| NDT3167-B | BOEING REFERENCE STANDARD 737 PART 6 57-10-58 PAGE | 3 | |
| NDT3167-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-D | BOEING STANDARD 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-E | BOEING REFERENCE STANDARD 737 PART 6 57-10-58 PAGE 7 FIGURE 2. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT3167-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-58 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3167-G | Boeing NG Ref Standard | 3 | |
| NDT3167-H | BOEING STANDARD 737 PT6 57-10-58 PG 7 FG 2 | 3 | |
| NDT3167-J | BOEING REFERENCE STANDARD 737 PART 6 57-10-58 PAGE | 3 | |
| NDT3167A-J | BOEING STANDARD 737 PT6 57-10-58 PG 7 FG 2, NDT3167A THRU J | 1 | |
| NDT3168 | BOEING STANDARD, 737 PT6 57-10-53 PG 6 FG 2 | 3 | |
| NDT3169 | BOEING REFERENCE STANDARD 737 Part 6 57-10-48 Page 5 Figure 2. Material: 2024-T3. Includes test report and Certificate of Conformance. | 1 | |
| NDT317 | Boeing Standard, 737 PT6 53-10-16:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3170 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE | 5 | |
| NDT3171 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 17 FIGURE 3. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT3172 | Boeing Standard 737 PT4 57-10-05 PG 14 FG 2 | 3 | |
| NDT3176-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-59 Page 12 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3176-B | Boeing NG Ref Standard | 3 | |
| NDT3176-C | BOEING STANDARD 737 PT6 57-10-59 PG 12 FG 2 | 3 | |
| NDT3176-D | Boeing NG Ref Standard | 3 | |
| NDT3176A-D | BOEING REFERENCE STANDARD | 1 | |
| NDT3178-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-B | BOEING REFERENCE STANDARD 737 PART 6 57-10-62 PAGE | 2 | |
| NDT3178-C | BOEING STANDARD 737 PT6 57-10-62 PG 7 FG 2 | 3 | |
| NDT3178-D | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2 | 3 | |
| NDT3178-E | BOEING STANDARD 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-F | BOEING STANDARD 737 PT6 57-10-62 PG 7 FG 2 | 2 | |
| NDT3178-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | 2 | |
| NDT3178-X | BOEING REFERENCE STANDARD 737 Part 6 57-10-62 Page 8 Figure 2. Material: 2024-T3. Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3178A | Boeing NG Ref Standard | 2 | |
| NDT3178A-G | Boeing Standard 737 PT6 57-10-62 PG 7 FG 2, NDT3178A THRU G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3178B | Boeing NG Ref Standard | 2 | |
| NDT3178C | Boeing NG Ref Standard | 3 | |
| NDT3178D | Boeing NG Ref Standard | 3 | |
| NDT3178E | Boeing NG Ref Standard | 2 | |
| NDT3178F | Boeing NG Ref Standard | 2 | |
| NDT3178G | Boeing NG Ref Standard | 2 | |
| NDT3179 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3179-A | BOEING REFERENCE STANDARD 737 Part 6 53-30-39 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3179-B | BOEING REFERENCE STANDARD 737 Part 6 53-30-39 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3179-C | BOEING REFERENCE STANDARD 737 Part 6 53-30-39 Page 4 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3180-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-D | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-E | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-F | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-G | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-H | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3180-J | BOEING REFERENCE STANDARD 737 Part 6 57-10-61 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3181-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3181-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3181G | BOEING GUIDE 737 Part 6 57-10-63 page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3182-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 10 Figure 3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3182-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 10 Figure 3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3182G | BOEING GUIDE 737 Part 6 57-10-63 Page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3183 | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 11 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3183G | BOEING GUIDE 737 Part 6 57-10-63 Page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3184 | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 12 Figure 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3184G | BOEING GUIDE 737 Part 6 57-10-63 Page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3185-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 13 Figure 6. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3185-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-63 Page 13 Figure 6. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3185G | BOEING GUIDE 737 part 6 57-10-63 page 14 Figure 7. Material:Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3186 | BOEING REFERENCE STANDARD 737 PT 4 57-10-17. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3187 | BOEING REFERENCE STANDARD 737 PT 4 57-10-17. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3189 | BOEING REFERENCE STANDARD 737 PART 4 55-10-18 PAGE 6 FIGURE 2. MATERIAL: 7075-T6, 2024EQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3190-A | BOEING REFERENCE STANDARD 737 PART 6 55-10-45 PAGE | 2 | |
| NDT3190-B | BOEING REFERENCE STANDARD 737 PART 6 55-10-45 PAGE | 2 | |
| NDT3190-C | BOEING REFERENCE STANDARD 737 PART 6 55-10-45 PAGE | 2 | |
| NDT3190-D | BOEING REFERENCE STANDARD 737 PART 6 55-10-45 PAGE | 2 | |
| NDT3191 | BOEING REFERENCE STANDARD 737 PART 6 55-10-28 PAGE | 2 | |
| NDT3192 | BOEING REFERENCE STANDARD 737 Part 6 55-10-28 Page 7 Figure 3. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3193 | BOEING REFERENCE STANDARD 737 PT 6 51-30-28 FIG 1. Includes Certification Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3194 | Boeing Metal reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3194-36/36 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3194-40/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3194-45/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3194-50/40 | BOEING REFERENCE STANDARD 737 PART 6 53-30-45 PAGE 7 FIGURE 1 TABLE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3195 | BOEING STANDARD | 1 | |
| NDT3196 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3197 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 20 FIGURE 6. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3198 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3199 R&D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT320 | Boeing 737 Part 6 53-10-19 PG4 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3202-A | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3202-B | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3202-C | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3202-D | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3202-E | BOEING REFERENCE STANDARD 737 PART 6 55-10-53 PAGE | 2 | |
| NDT3202-F | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3202-G | Boeing Standard 737 PT6 55-10-53 PG9 FG2 | 1 | |
| NDT3203 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3204 | BOEING REFERENCE STANDARD 737 Part 4 53-10-08 Page 9 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3205 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3206 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3207 | BOEING REFERENCE STANDARD 737 Part 6 55-10-50 Page 5 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3207A | BOEING REFERENCE STANDARD 737 Part 6 55-10-82 Paqe 5 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3208-A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3208-B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3208-C | Boeing Standard 737 PT6 55-10-55 PG6 FG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3209 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3209-A | BOEING REFERENCE STANDARD PART 6 55-10-62 PAGE 17 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3209A | BOEING REFERENCE STANDARD 737 Part 6 55-10-74 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3210 | BOEING STANDARD, 737 PT4 57-10-81 PG 8 FG 2 | 1 | |
| NDT3211 | BOEING REFERENCE STANDARD B737 NDTM P6, 57-10-81, PAGE 9 FIGURE 3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3212 | BOEING REFERENCE STANDARD B737 NDTM P6, 57-10-81 PAGE 10 FIGURE 4. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3213 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3214 | BOEING REFERENCE STANDARD PT 4 53-10-09 FIGURE 2 PAGE 6. Includes test report and Certificate of Conformance. | 1 | |
| NDT3215 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3216 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3217-A | Boeing Standard 737 PT6 57-10-79 PG6 FG2 | 1 | |
| NDT3217-B | BOEING REFERENCE STANDARD 737, PART 6: 57-10-79. Includes test report and Certificate of Conformance. | 1 | |
| NDT3218 | Boeing Standard 737 PT6 55-10-53 PG 10 FG 3 | 1 | |
| NDT3219 | BOEING REFERENCE STANDARD 737 PART 4 57-10-19 PAGE 11 FIGURE 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3220 | Boeing Standard 737 PT4 57-50-04 PG 6 FG 2 | 1 | |
| NDT3221 | Boeing Standard 737 PT4 55-10-19 PG 5 FG 2 | 1 | |
| NDT3223 | Boeing Standard 737 PT6 53-11-34 PG 6 FG 2 | 1 | |
| NDT3224 | BOEING REFERENCE STANDARD 737 Part 4 54-40-01 Page 7 Figure 3. Material: 15-5PH or 4330. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3225 | BOEING REFERENCE STANDARD 737 Part 6 54-40-20 Page 6 Figure 2. Material: 6AL-4V and 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3226 | BOEING REFERENCE STANDARD 53-11-39 PART 6. MATERIAL: 2024-T3 ALUMINUM. 2. Includes Test Report and Certificate of Conformance.BACR15FT6D RIVETS BUCKED BETWEEN .250"Ø and .280"Ø. | 1 | |
| NDT3226A | Boeing Standard, 737 PT6 53-11-39:PG5 Fig 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3227 | BOEING REFERENCE STANDARD 737 Part 4 54-40-09 Page 6 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3228-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3228-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3228-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-87 Page 7 Figure 2. Material: 7150-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3229 | BOEING REFERENCE STANDARD 737 PT6 53-30-50 FIGURE 2 PAGE 21. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT322A | Boeing Standard, 737 PT6 53-10-25:PG5 Fig 1 | 1 | |
| NDT3230 | REFERENCE BLOCK BOEING BONDED STANDARD 737 | 2 | |
| NDT3231 | Boeing Standard 737 PT4 53-10-10 PG10 FG2 | 1 | |
| NDT3232-A | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3232-B | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3232-C | BOEING REFERENCE STANDARD 737 Part 6 57-10-86 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3233 | BOEING REFERENCE STANDARD 737 PART 4 53-30-11 PAGE 8 FIGURE 2. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3234 | BOEING REFERENCE STANDARD 737 Part 6 57-10-89 Page 7 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3235 | BOEING REFERENCE STANDARD 737 Part 4 -54-40-05 Page 5 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3236 | BOEING REFERENCE STANDARD 737 Part 6 57-10-85 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3237-.040/.010 | BOEING STANDARD 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-.050/.015 | Boeing Standard 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-.130/.020 | BOEING STANDARD 737 PT4 53-30-12 PG 14-15 FG 7 | 1 | |
| NDT3237-0.040/0.010 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.050/0.015 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3237-0.130/0.020 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3237-050-015 | TOOL BOEING STANDARD | 1 | |
| NDT3237-130-020 | TOOL BOEING STANDARD | 1 | |
| NDT3237-P1 | BOEING STANDARD 737 PT4 53-30-12 PG 16 FG 8 | 2 | |
| NDT3238 | BOEING REFERENCE STANDARD 737 PART 4 55-10-23 PAGE 6 FIGURE 2. MATERIAL: 7050-T7EQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3238P | BOEING POSITIONER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3239 | BOEING REFERENCE STANDARD 737 Part 4 55-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3239G | BOEING CALIBRATION GUIDE 737 Part 4 55-30-03 Page 8 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3240 | BOEING REFERENCE STANDARD 737 Part 6 57-10-90 Page 6 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3242 | BOEING REFERENCE STANDARD 737 PT 4 54-40-03. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3243 | BOEING REFERENCE STANDARD 737 PT 4 54-40-04. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3244 | BOEING STANDARD, 737 PT4 53-11-42 PG 8 FG 2 | 1 | |
| NDT3248 | BOEING REFERENCE STANDARD 737 Part 6 55-10-66 Page 5 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3249 | BOEING REFERENCE STANDARD 737 PT 6 55-10-64 Page 12 Figure 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3250 | BOEING REFERENCE STANDARD 737 PT 6 55-10-64 PAGE 1 | 1 | |
| NDT3251 | BOEING REFERENCE STANDARD 737 Part 6 52-30-02 page 5 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3252 | BOEING REFERENCE STANDARD 737 Part 4 52-10-03 Page 7 Figure 2. Material: 7050-T7 or 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3253 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 7 Figure 2. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3254 | BOEING REFERENCE STANDARD 737 Part 4 54-40-06 Page 8 Figure 3. Material: 15-5PH or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3255G | BOEING GUIDE FOR NDT3255 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3257 | BOEING REFERENCE STANDARD 737 Part 657-10-96 Page 7 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3258-B | BOEING REFERENCE STANDARD 737 Part 4 54-40-08 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3259 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 8 Figure 2. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT326 | Boeing Standard, 737 PT6 53-10-28:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3260 | BOEING REFERENCE STANDARD 737 Part 6 54-40-17 Page 9 Figure 3. Material: 6AL-4V, 15-5PH and 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3261 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 9 Figure 2. Material: 2024-T3 and 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3262 | BOEING REFERENCE STANDARD 737 Part 4 54-40-17 Page 6 Figure 2. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3263 | BOEING REFERENCE STANDARD 737 Part 6 57-50-31 Page 10 Figure 3. Material: 2024-T3 and 7075-T7. Inlcudes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3264 | BOEING REFERENCE STANDARD 737 Part 4 55-10-22 page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3265 | BOEING REFERENCE STANDARD 737 Part 655-10-70 Page 8 Figure 2. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3266 | BOEING REFERENCE STANDARD 737 Part 6 -57-10-96 Page 8 Figure 3. Material: 7050-T7 or Eqivalent. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3267-.040/.040 | BOEING REFERENCE STANDARD 737 | 2 | |
| NDT3267-.050/.040 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .050/.040. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT3267-.063/.056 | BOEING REFERENCE STANDARD 737 | 2 | |
| NDT3267-.063/.063 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .063/.063. IncludesTest Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3267-.080/.063 | BOEING REFERENCE STANDARD 737 | 2 | |
| NDT3267-.080/.100 | Boeing Bonded Reference Standard 737 PT4 53-30-01 PG 6 FG 3, .080/.100. IncludesTest Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3267-T1/T2 | BOEING REFERENCE STANDARD NDT3267-T1/T2 X 1SET OF 4 PIECES | 1 | |
| NDT3268 | BOEING REFERENCE STANDARD 737 Part 4 53-10-11 Page 4 Figure 2. Material: 7075-T6 or Equivalent. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3269 | BOEING REFERENCE STANDARD, PT6, 54-40-19 PAGE 12 FIGURE 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3271 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 2 SHEET 1&2 PAGE 12. MATERIAL: 6AL-4V INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. MATERIAL: 6AL-4V TITANIUM. | 1 | |
| NDT3272 | BOEING REFERENCE STANDARD 737 PART 4 55-10-27 FIGURE 3 PAGE 14. MATERIAL: 6AL-4v. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3273A | BOEING REFERENCE STANDARD PART 6 55-10-84 PAGE 6 F | 1 | |
| NDT3276 | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGURE 2 PAGE 9. MATERIAL: 2024-T3 ALUMINUM WITH RUBBER FEET ON BOTTOM FOR SUPPORT. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3276A | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGU | 2 | |
| NDT3278-A | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3278-B | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3278-C | BOEING STANDARD, .090 UPPER PLATE, .080 LOWER PLATE | 1 | |
| NDT3282 | BOEING REFERENCE STANDARD 737 | 3 | |
| NDT3285 | BOEING REFERENCE STANDARD 737 Part 6 53-30-63 Page 11 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3286 | BOEING REFERENCE STANDARD 787 PART 4 53-20-02 PAGE 7 FIGURE 2. MATERIAL: 6AL-4V. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3287 | BOEING REFERENCE STANDARD 787 PART 4 53-20-01 PAGE 7 FIGURE 2. MATERIAL: 6AL-4V. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT3288 | BOEING REFERENCE STANDARD 787 Part 4 53-20-01 Page 7 Figure 2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3289 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3291 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3292 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3293 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3294 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT3295 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3296 | BOEING REFERENCE STANDARD 737 Part 6 53-30-65 Page 8 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3297 | BOEING REFERENCE STANDARD 737 Part 6 53-30-64 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3298 | BOEING REFERENCE STANDARD 737 Part 6 53-30-66 Page 6 Figure 2. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3299 | BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT32XX-A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT32XX-B | Boeing Standard top plate only | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT32XX-C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT32XX-D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT32XX-E | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT32XX-F | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3300 | BOEING REFERENCE STANDARD 737 Part 6 5330-60 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3303 | BOEING REFERENCE STANDARD 737 PT 4 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3304 | BOEING 737 R&D REFERENCE STANDARD, 53-30-XX PART 6. MATERIAL: 2024-T3 CLAD, 1100 FOIL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3305A | BOEING REFERENCE STANDARD | 2 | |
| NDT3305B | BOEING REFERENCE STANDARD PART 4 53-10-6 | 3 | |
| NDT3307 | BOEING REFERENCE STANDARD 737 PART 6 57-11-05 PAGE 5 FIGURE 2 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3308 | BOEING REFERENCE STANDARD 737 PART 6 57-11-05 PAGE 6 FIGURE 2 SHEET 2. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3308A | BOEING STANDARD, B737 PT6 57-11-05 PG 6 FG 2 | 2 | |
| NDT3312 | BOEING REFERENCE STANDARD 737 PART 4 53-10-13 FIGURE 2 SHEET 1 | 1 | |
| NDT335 | BOEING STANDARD, 737 PT6 53-10-31:PG7 FIG3 | 2 | |
| NDT341 | Boeing Standard, 737 PT6 53-10-40 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT345 | Boeing Standard, 737 PT6 57-40-01:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT349 | Boeing Standard, 737 PT4 32-10-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT350 | Boeing Standard, 737 PT4 32-20-01:PG4 FIG2 SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT363 | Boeing Reference Standard 737 53-30-03 PT6 PG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT365 | BOEING STANDARD, 737 PT4 71-20-01:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT367 | Boeing Standard, 737 PT6 71-20-01:PG12 FIG4 SHT1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT368 | Boeing Standard, 737 PT6 53-10-35:PG6 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT369 | BOEING STANDARD, 737 PT6 53-30-05: PG6 FIG2 SHEET4 | 2 | |
| NDT370 | Boeing Standard, 737 PT4 53-30-02:PG5 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT370-.036/.036 | BOEING STANDARD, 737 PT4 53-30-02:PG5 FIG1, .036 TOP AND BOTTOM SHEET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT371 | Boeing Standard, 737 PT6 53-30-06:PG3 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT378 | Boeing Standard, 737 PT6 53-10-44:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT391 | BOEING REFERENCE STANDARD Part 6 53-10-51 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT392 | BOEING REFERENCE STANDARD 737 Part 4 53-30-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT394 | Boeing Standard, 737 PT6 54-30-01:PG4 FIG1 SHEET1 | 1 | |
| NDT394P | BOEING POSITIONER 737 PT 6 54-30-01. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT396 | BOEING REFERENCE STANDARD, 737 PT6 53-30 | 6 | |
| NDT396-32/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396-36/36 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396-40/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396-45/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396-50/40 | BOEING REFERENCE STANDARD 737 PT 6 53-30-44 FIGURE 2 PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396-56/40 | Boeing Reference Standard, 737 PT6 53-30-44, PG7 FIG 2, .056" Upper skin, .040 Lower skin | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396B | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT396C | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT398 | BOEING STANDARD, 737 PT4 53-10-01:FIG3 | 2 | |
| NDT401 | Boeing Standard, 747 PT4 57-10-01: FIG1 PG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4018P | Boeing Standard, 747 PT4 54-40-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT402 | Boeing Standard, 747 PT4 57-10-04: FIG1 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT403 | Boeing Standard, 747 PT4 57-10-04: FIG2 PG6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT404 | Boeing Standard, 747 PT6 57-10-08:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT405 | Boeing Standard, 747 PT4 57-10-02: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT406 | Boeing Standard, 747 PT6 57-10-09:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4064 | BOEING REFERENCE STANDARD 747 Part 6 53-30-06 Page 4 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT408 | Boeing Standard, 747 PT6 57-10-03: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4099 | Boeing Standard, 747 PT4 54-40-11:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT410 | Boeing Standard, 747 PT4 57-10-05: FIG3 PG6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4101 | Boeing Standard, 747 PT6 54-40-09:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4106 | Boeing Standard, 747 PT4 54-30-05:PG9 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4107 | Boeing Standard, 747 PT4 54-30-06:PG11 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4108 | Boeing Standard, 747 PT4 54-30-06:PG12 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4109 | Boeing Standard, 747 PT4 54-30-08:PG10 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT411 | Boeing Standard, 747 PT6 55-10-04: FIG1 PG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4115 | Boeing Standard, 747 PT4 54-30-07:PG10 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4116 | Boeing Standard, 747 PT4 54-40-02:PG20 FIG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4118 | Boeing Standard, 747 PT4 54-40-02:PG22 FIG9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT412 | Boeing Standard, 747 PT6 55-10-01: FIG1 PG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4120G1 | Boeing Standard, 747 PT4 54-30-10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4123 | Boeing Standard, 747 PT4 54-30-10:PG13 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4123P | Boeing Standard, 747 PT4 54-30-10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4131 | Boeing Standard, 747 PT4 54-40-11:PG21 FIG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4133 | Boeing Standard, 747 PT4 54-40-11:PG23 FIG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4150 | BOEING 747 COMPOSITE REFERENCE STANDARD PART 4 57-22-01 FIGURE 2. INCLUDES C-SCAN REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT4151 | BOEING 747 REFERENCE STANDARD PART 4 57-10-17 FIGURE 3 PAGE 10. 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4152 | BOEING 747 REFERENCE STANDARD PART 4 53-10-07 PAGE 6 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4153 | BOEING 747 REFERENCE STANDARD PART 4 57-30-08 PAGE 6 FIGURE 2. PROCEDURE FOR INSPECTING CRACKED RIVET PART NUMBER BACR15FH10DD17 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4154 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 5 PAGE 19. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4155 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 6 PAGE 20. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4156 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 FIGURE 7 PAGE 21. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4157 | BOEING REFERENCE STANDARD 747 PT 4 54-40-14 PAGE 22 FIGURE 8. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4162P | BOEING TRANSDUCER POSITIONER 747 PT 4 54-40-14 FIGURE 4 (Sheet 1 of 4) PAGE 15. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4163P | BOEING TRANSDUCER POSITIONER 747 PT 4 54-40-14 FIGURE 4 (Sheet 2 of 4) PAGE 16. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4164P | BOEING TRANSDUCER POSITIONER 747 PT 4 54-40-14 FIGURE 4 (Sheet 3 of 4) PAGE 17. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4165P | BOEING TRANSDUCER POSITIONER 747 PT 4 54-40-14 FIGURE 4 (Sheet 4 of 4) PAGE 18. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4170 | BOEING REFERENCE STANDARD 747 Part 4 53-30-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4173 | Boeing Standard, 747 PT6 53-30-11:PG6 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4175 | Boeing Standard, 747 PT4 53-10-41:PG12 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4176 | BOEING REFERENCE STANDARD 747 PT 6 53-10-41 Page 13 Figure 3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4178 | BOEING REFERENCE STANDARD 747 Part 4 53-40-05 Page 4 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4180 | Boeing Reference Standard, 747 57-10-37 part 6, page 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4183 | BOEING BONDED REFERENCE STANDARD, PT4, 53-30-03, PG11, FIG2 | 1 | |
| NDT4187 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4190 | Boeing Standard w/ certs | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4190A | Boeing Standard w/ certs | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4205 | BOEING REFERENCE STANDARD 747 PT 4 57-40-07 PAGE 5 FIGURE 2. MATERIAL: 4340 STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4208 | BOEING REFERENCE STANDARD 747 PART 4 54-40-23 FIGURE 2 PAGE 8. INCLUDES CERTIFICATION REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT4209 | Boeing Standard, 747 PT4 53-10-08:PG12 FIG2 | 1 | |
| NDT4211 | BOEING REFERENCE STANDARD 747 PT 4 53-10-08 PAGE 12. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4212 | Boeing Standard 747 53-10-09 PT4 PG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4214 | Boeing Standard 747 53-30-08 PT6 PG8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4217 | Boeing Reference Standard, 747 PT6 53-30-14:PG6 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4218A | BOEING METAL REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4219 | Boeing Standard, 747 PT4 53-10-11:PG6 FIG4 | 1 | |
| NDT4220 | BOEING REFERENCE STANDARD 747 Part 6 53-30-13 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4221 | Boeing Standard 747 53-30-12 PT6 PG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4224 | Boeing Standard 747 54-40-24 PT4 PG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4225 | BOEING 747 REFERENCE STANDARD PART 6 53-10-47 PAGE 7 FIGURE 2. MATERIAL: 7075-T6 or 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4226 | BOEING REFERENCE STANDARD 747 Part 4 57-10-22 Page 6 Figure 2, Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4228 | BOEING 747 REFERENCE STANDARD PART 6 54-40-16 PAGE 11 FIGURE 2. MATERIAL: 15-5PH, 17-4 PH or 4130 STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4229 | BOEING REFERENCE STANDARD PT 6 54-40-16 FIG 3, PAGE 12. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT423 | Boeing Standard, 747 PT6 57-10-17:PG8 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4230 | Boeing Standard, 747 PT4 53-10-10:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4230SPL | Boeing Standard, 747 PT4 53-10-10:PG6 FIG2 (.100" Long notches) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4231 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4232 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 2, Page 6. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4233 | Boeing Standard, 747 PT4 55-10-03: PG7 FIG3 | 1 | |
| NDT4234 | Boeing Standard, 747 PT4 55-10-03: PG8 FIG4, with cert | 1 | |
| NDT4235 | Boeing Standard, 747 PT4 55-10-03: PG9 FIG5, with cert | 1 | |
| NDT4236 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4237 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4238 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4239 | Boeing Standard, 747 PT6 53-30-16: PG6 FIG1 SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT424 | Boeing Standard, 747 PT6 57-10-17:PG9 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4240 | BOEING REFERENCE STANDARD 747 PART 4 27-20-01 PAGE | 1 | |
| NDT4243 | BOEING REFERENCE STANDARD 747 Part 6 57-10-31 Page 4 Figure 1. Material: 2024-T3 or An Airplane Quality with an Electrical Conductivity of 28-43% IACS. Fasteners: Non-Magetic Fastener. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4244 | BOEING REFERENCE STANDARD 747 Part 4 53-10-12 Page 5 Figure 2. Material: 7075-T6, 7075-T7, or 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT4246 | BOEING REFERENCE STANDARD 747 PT 6 53-10-34 Page 6 Figure 3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4247 | BOEING STANDARD | 2 | |
| NDT4249 | BOEING REFERENCE STANDARD 747 Part 6 53-30-19 Page 3 Figure 1. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4250 | BOEING REFERENCE STANDARD 747 PT 4 57-30-10 Page 6 Figure 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4251 | BOEING REFERENCE STANDARD 747 Part 4 57-30-11 Page 11 Figure 2. Material: Aircraft Qualtiy Alimunim Plate, Any 2024 and 7075. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4251A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4251B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4251C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4252 | BOEING REFERENCE STANDARD 747 Part 4 57-10-23 Page 6 Figure 2. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4253 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4254 | BOEING STANDARD 747 PT4 57-10-24 FIG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT426 | Boeing Standard, 747 PT6 55-10-01: FIG1 PG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4263 | BOEING REFERENCE STANDARD 747 PT 4 57-10-25 PAGE 20 FIGURE 3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4264 | BOEING REFERENCE STANDARD 747 PT 4 57-10-25 PAGE 21 FIGURE 4. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4266 | BOEING REFERENCE STANDARD 747 PT 4 57-30-12 PAGE 8 FIGURE 2. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4267 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 10 FIGURE 2. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4268 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE | 1 | |
| NDT4269 | BOEING REFERENCE STANDARD 747 part 4 57-40-08 page 12 Figure 4. Material: 7075-T7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4270 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 13 FIGURE 5. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4271 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE | 1 | |
| NDT4272 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 15 FIGURE 7. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4273 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 16 FIGURE 8. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4274 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 17 FIGURE 9. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4275 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4276 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4277 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4278 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4279 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT4280 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 18 FIGURE 10. MATERIAL: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4281 | BOEING REFERENCE STANDARD 747 PT 4 57-10-26 PAGE 5 FIGURE 2. MATERIAL: 15-5PH. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT431 | Boeing Standard 747-53-10-19 PT 6 PG 4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT432 | Boeing Standard, 747 PT6 57-30-02:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT435 | Boeing Standard, 747 PT6 57-10-20:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT436 | Boeing Standard, 747 PT6 57-10-20:PG8 FIG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT437 | Boeing Standard, 747 PT4, 53-10-01, PG5, FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT438 | Boeing Standard, 747 PT4, 53-10-01, PG5, FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT439 | Boeing Standard, 747 PT6 57-10-22:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT440 | Boeing Standard, 747 PT4 57-10-11: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT441 | Boeing Standard, 747 PT4 57-10-11: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT442 | Boeing Standard 747-53-10-02 PT 4 PG 4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT443 | Boeing Standard 747-53-10-02 PT 4 PG 4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT446 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT447 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT448 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT449 | Boeing Standard, 747 PT4 57-10-13: FIG2 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT455 | Boeing Standard 747-53-40-01 PT 4 PG 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT456 | Boeing Standard 747-53-40-01PT 4 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT460 | Boeing Standard, 747 PT6 57-10-28:PG3 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT471 | Boeing Standard, 747 PT4 57-30-02: FIG1 PG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT474 | Boeing Standard 747 PT6 53-10-20 FG 1 PG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT475 | Boeing Standard, 747 PT6 57-10-27:PG4 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT476 | Boeing Standard 747-53-10-18 PT 6 PG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT478 | Boeing Standard 747-53-10-18 PT 6 PG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT479 | Boeing Standard 747 PT6 53-10-22 FG 2 PG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT480 | Boeing Standard 747 PT6 53-10-22 FG 3 PG 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT481 | Boeing Standard 747 PT6 53-10-22 FG 4 PG 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT482 | Boeing Standard, 747 PT6 55-10-08: PG7 FIG3, with cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT483 | Boeing Standard, 747 PT6 55-10-08: PG7 FIG3, with cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT484 | Boeing Standard 747 PT6 53-10-25 FG 1 PG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT490 | Boeing Standard 747 57-30-06 Part 4 page 5 fig 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT491 | Boeing Standard 747 PT6 53-10-16 FG 1 PG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT497 | Boeing Standard, 767 PT6 53-00-05:PG2 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT504A | BOEING 757 REFERENCE STANDARD, PART 6, 54-40-01; FIGURE 3, PAGE 14 | 1 | |
| NDT504B | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT504C | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT504D | BOEING REFERENCE STANDARD 757 Part 6 54-40-01 Page 12 Figure 3, Material: 4330, 4330M, 4340, or 4340M. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT504E | Boeing 757 Reference Standard, Part 6, 54-40-01; Figure 3, Page 14 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT506 | BOEING STANDARD 757 PART 4 57-40-01 FIGURE 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT5097-A | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. MATERIAL 2024-T37075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT5097-B | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT5097-C | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT5097-D | BOEING REFERENCE STANDARD 757 PT 4 57-20-03 FIG 2 PG 6. Material 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT511 | Boeing Standard, 757 PT6 57-10-02: PG7 FIG2 | 1 | |
| NDT512 | BOEING REFERENCE STANDARD 757, PT 4 5710-01. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT514 | Boeing Standard, 757 PT6 57-20-01:PAGE8 FIG2 SHEET1&2 | 1 | |
| NDT515 | BOEING REFERENCE STANDARD 757 PT 4 57-21-01 FIG 3 PG 6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT516 | Boeing Standard, 757 PT6 57-23-01:PAGE3 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT518 | BOEING REFERENCE STANDARD 757 PT 4 57-21-02 FIG 2 PG 6. Includes Test Report and Certificate of Conformance... | 1 | |
| NDT519 | BOEING REFERENCE STANDARD 757 Part 6 52-30-01 Page 8 Figure 4. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT521 | Boeing Standard, 757 PT4 55-10-02:PG8 FIG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT522 | Boeing Standard, 757 PT4 53-80-01: PG8 FIG4 | 1 | |
| NDT522P1 | Boeing Standard, 757 PT4 53-80-01: PG9 FIG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT523 | Boeing Standard, 757 PT6 53-60-04:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT524 | Boeing Standard, 757 PT6 53-10-06:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT525 | Boeing Standard, 757 PT4 54-50-01:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT527 | Boeing Standard, 757 PT6 53-30-06 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT528 | BOEING REFERENCE STANDARD 757 Part 4 55-10-04 Page 10 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT530 | Boeing Standard, 757 PT6 53-10-04: PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT531 | BOEING REFERENCE STANDARD 757 Part 6 53-60-01 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT532 | Boeing Standard, 757 PT4 55-10-05: PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT533 | BOEING REFERENCE STANDARD 757 PT 4 55-10-03 FI2 3 PG 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT535 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT536 | Boeing Standard, 757 PT4 53-40-01: PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT537 | BOEING STANDARD, 757 PT4 57-10-02:PAGE8 FIG3 | 2 | |
| NDT538 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT539 | Boeing Standard 757 PT6 55-10-02 PG5 FG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT542 | Boeing Standard 757 Part 4 55-10-07 page 11 figure 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT543 | Boeing Standard, 757 PT6 53-40-01:PG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT546 | Boeing Standard, 757 PT4 57-20-02:PG7 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT549 | STANDARD BOEING 757 PT6 57-20-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT552 | BOEING REFERENCE STANDARD 757 PT 4 57-20-01. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT553 | Boeing Standard, 757 PT6 52-30-02:PG6 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT554 | Boeing Standard, 757 PT6 53-10-07: PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT555 | BOEING REFERENCE STANDARD 757 PT 4 53-10-19 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT558 | BOEING REFERENCE STANDARD 757 PART 6 53-30-12 PAGE 8 FIGURE 1. MATERIAL: 2024-T3. INCLUDES CERTIFICATION REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT559 | BOEING STANDARD, 757 PT6 57-51-01:PG6 FIG2 | 1 | |
| NDT562 | BOEING REFERENCE STANDARD 757 Part 4 57-25-01 Page 11 Figure 2. Material: Aircraft Qualtiy Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT563 | Boeing Standard, 757 PT6 57-51-04:PG8 FIG2 | 2 | |
| NDT564A | BOEING REFERENCE STANDARD 757 Part 4 57-50-01 Page 4 Figure 2. Material: Aircraft Grade Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT564B | Boeing Standard 737 PT4 57-50-01 PG4 FG2 | 2 | |
| NDT566 | Boeing Standard, 757 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT567 | Boeing Standard, 757 PT4 54-50-02 PG 8 FG 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT567-G1 | Positioner, used with Boeing Standard NDT567, .645" Dimension 767 PT4 54-50-02 PG 9 FG 4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT567-G2 | BOEING GUIDE FOR NDT567, 757 PT4 54-50-02 FIGURE 4 PAGE 9. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT568 | Boeing Standard, 757 | 2 | |
| NDT568 VER6 | Boeing Standard, 757, fasteners will be supplied by customer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT569 | BOEING STANDARD 757 PT6 53-40-07 PG 7 FG 2 | 1 | |
| NDT570 | Boeing Standard, VER 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT571 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT572-6 R&D | Boeing Standard, #6 dia fasteners | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT572-8 R&D | Boeing Standard, #8 dia fasteners | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT573 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT574 | Boeing Standard, 5 Notches | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT575 | Boeing Standard 757 PT6 53-60-12 PG 8 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT576 | Boeing Reference Standard, 757 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT577 | Boeing Standard, 757 PT6 53-10-12:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT578 | Boeing Standard 757 PT6 55-10-04 PG 10 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT579 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT580 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT581 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT582 | BOEING REFERENCE STANDARD 757 PT 6 57-50-08 Page 7 Figure 2. Material: 2024-T351 Aluminum Includes Test Report and Certificate of Conformance. | 2 | |
| NDT583 | Boeing Reference Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT584 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT595 | BOEING REFERENCE STANDARD 757 Part 4 53-80-02 Page 7 Figure 2. Material: 2024-T3 or Equivalent. includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT596 | BOEING STANDARD 757 PT4 52-30-01 PG 6 FG 2 | 2 | |
| NDT6000-EC | Boeing Standard 767 PT 4 57-50-02 PG10 FIG 4 | 2 | |
| NDT6000A | BOEING REFERENCE STANDARD 767 PART 4 57-50-02 PAGE 9 FIGURE 3. MATERIAL: 7075 ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT6000B | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000C | BOEING REFERENCE STANDARD 767 PT 4 57-50-02 | 2 | |
| NDT6000D | Boeing Standard, 767 PT4 57-50-02..Was NDT700D | 2 | |
| NDT6000E | Boeing Standard, 767 PT4 57-50-02..Was NDT700E | 2 | |
| NDT6001 | BOEING REFERENCE STANDARD 767 Part 4 57-50-23 Page 7 Figure 2. Material: 4330M, 4340M or 4340. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6002 | Boeing Standard 767 PT4 57-50-24 PG7 FG2 *for TEK-5024 | 2 | |
| NDT6004 | Boeing Standard 767 PT4 57-50-09 PG 11 FG 2 | 2 | |
| NDT6005 | BOEING REFERENCE STANDARD 767 PART 4 57-50-09 PAGE 12 FIGURE 3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6006 | BOEING REFERENCE STANDARD 767 PART 4 57-50-09 PAGE 13 FIGURE 4. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6007 | BOEING REFERENCE STANDARD 767 PT 4 57-50-11. Includes Test Report and Certificate of Conformance | 2 | |
| NDT6008 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-11 PG 8 FG 3 | 2 | |
| NDT6009 | BOEING REFERENCE STANDARD 767 Part 4 52-30-03 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6010 | BOEING REFERENCE STANDARD 767 Part 4 52-30-02 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6011 | Boeing Standard 767 PT4 57-50-20 PG 6 FG 2 | 2 | |
| NDT6011G | BOEING GUIDE 767 Part 4 57-50-20 Page 7 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6012 | BOEING REFERENCE STANDARD 767 PT 4 57-50-26 FIGURE 2, PAGE 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6013 | Boeing Standard, 767 PT4 57-50-26 PG 8 FG 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6014 | BOEING REFERENCE STANDARD 767 Part 4 57-50-16 page 6 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6015 | BOEING REFERENCE STANDARD 767 Part 4 57-50-16 Page 6 Figure 3. Material: 7075-T or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6016 | BOEING REFERENCE STANDARD 767 Part 4 53-10-03 page 4 Figure 2. Material: 7075-T7 or 7075-T6. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6017 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-22 PG 6-7 FG 2 | 2 | |
| NDT6018 | Boeing Titanium Reference Standard w/certs 767 PT4 57-50-22 PG 8-9 FG 3 | 2 | |
| NDT6019 | Boeing Reference Standard 767 52-32-06 Fig. 2 | 2 | |
| NDT6020 | Boeing Standard 767 PT4 57-50-14 PG 11 FG 4 | 2 | |
| NDT6021 | Boeing Standard 767 PT4 57-50-14 PG 12 FG 5 | 2 | |
| NDT6022 | BOEING REFERENCE STANDARD 767 Part 4 57-50-15 Page 5 Figure 2. Material: 7075-T6 or 2024, 7050, 7075. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6023 | Boeing Standard 767 57-50-21 PT4 PG 5 FG 2 | 2 | |
| NDT6023P | Boeing Standard 767 57-50-21 PT4 PG 6 FG 3 | 2 | |
| NDT6024 | Boeing Standard, 767 PT6 57-50-10 | 2 | |
| NDT6025-1 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-2 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-3 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-4 | Boeing Standard, 767 PT4 57-50-17 PG 6 FG 2 | 1 | |
| NDT6025-5 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6025-6 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6027 | Boeing Standard 767 PT4 57-50-10 PG 9 FG2 | 3 | |
| NDT6027P | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-10 PAGE 13 FIGURE 6. Includes Certificate of Conformance. | 2 | |
| NDT6028 | Boeing Standard 767 PT4 57-50-10 PG 10 FG 3 | 3 | |
| NDT6029 | BOEING REFERENCE STANDARD 767 PART 4 57-50-10 PAGE 11 FIGURE 4. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6029P | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-10 PAGE 14 FIGURE 7. Includes Certificate of Conformance. | 2 | |
| NDT6030 | BOEING REFERENCE STANDARD 767 PART 4 57-50-10 PAGE 12 FIGURE 5. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6030P | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-10 PAGE 15 FIGURE 8. Includes Certificate of Conformance. | 2 | |
| NDT6031-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-2 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-2 | 2 | |
| NDT6031-3 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-4 | Boeing Standard 767 PT4 57-50-18 PG 5 FG 2 Used with TEK-5076-4 | 2 | |
| NDT6032-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-3 | Boeing Standard 767 PT4 57-50-19 PG 5 FG 2 Used with TEK-5077-3 | 2 | |
| NDT6032-4 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6033-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-12 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6033-2 | Boeing Standard 767 PT4 57-50-12 PG5 FG2 *for TEK-5078-2 | 2 | |
| NDT6034 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 7 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6035-1 | Boeing Standard 767 PT4 57-50-13 PG8 FG3 | 1 | |
| NDT6035-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 8 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6036 | BOEING REFERENCE STANDARD 767 PT 4 57-20-04 FIG 2. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT6036CG1 | GUIDE FOR NTD6036 BOEING 767 PART 4 57-20-004FIGURE 2 PAGE 7. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6036CG2 | GUIDE FOR NTD6036 BOEING 767 PART 4 57-20-004FIGURE 2 PAGE 7. Includes Certificate of Conformance. | 1 | |
| NDT6036G1 | GUIDE FOR NTD6036 BOEING 767 PART 4 57-20-004FIGURE 2 PAGE 7. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6036G2 | GUIDE FOR NTD6036 BOEING 767 PART 4 57-20-004FIGURE 2 PAGE 7. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6037 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6038 | BOEING REFERENCE STANDARD 767 Part 4 57-50-25 Page 6 Figure 2. Material: 7050-T7 or Equivalent. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6039 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6041 | BOEING REFERENCE STANDARD 767 PART 4 57-20-03 PAGE 8 FIGURE 3. MATERIAL: 2024-T37075-T. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT6045 | BOEING REFERENCE STANDARD 767 PART 4 54-50-08. MATERIAL: 7075-T6 or 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6045-SC1 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6045-SC2 | Boeing Transducer Guide. Material: Delrin ( Black Acetal). Used with NDT6045 Reference Standard. 767 PART 4 54-50-08 PAGE 15 FIGURE 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6046 | Boeing Standard 767 53-30-02 PT4 PG 8 FG 2 | 1 | |
| NDT6047 | Boeing Standard 767 53-30-02 PT4 PG 9 FG 3 | 2 | |
| NDT6048 | BOEING REFERENCE STANDARD 767 Part 4 27-40-02 horizontal stab inspection. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6049 | BOEING REFERENCE STANDARD 767 PART 6 57-20-09 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6050 | BOEING REFERENCE STANDARD 767 PART 6 57-20-09 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6051 | BOEING REFERENCE STANDARD 767 PART 6 57-20-09 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6052G | BOEING 767 6052 REFERENCE STANDARD GUIDE. DELRIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6057 | BOEING REFERENCE STANDARD 767 PART 4 54-50-11 PAGE 7 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6058 | BOEING 767 REFERENCE STANDARD PART 4 53-50-01 FIGURE 2 PAGE 10. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6059 | BOEING 767 REFERENCE STANDARD. PART 4 57-50-05 PAGE 8 FIGURE 3. MATERIAL: 15-5PH NORMALIZED. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6060 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6061 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6062 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6063 | BOEING REFERENCE STANDARD 767 | 2 | |
| NDT6064 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6065 | BOEING REFERENCE STANDARD 767 PART 4 54-50-09 PAGE 12 FIGURE 2. MATERIAL: 2024-T3 OR 7075 SERIES ALUMINUM.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6066 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 11. LUG B 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6066-P | BOEING POSITIONER (LUG B), LUCITE...PART 4 57-50-11 FIGURE 4 PAGE 12 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6067 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 9. LUG A 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6067-P | BOEING POSITIONER (LUG A), LUCITE. PART 4 57-50-11 FIGURE 4 PAGE 10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6068 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 15. LUG D 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6068-P | BOEING POSITIONER (LUG D), LUCITE. PART 4 57-50-11 FIGURE 4 PAGE 16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6069 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 13. LUG C..4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6069-P | BOEING POSITIONER (LUG C), LUCITE. PART 4 57-50-11 FIGURE 4 PAGE 14 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT607 | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6070 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 17. LUG E 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6070-P | BOEING POSITIONER (LUG E), LUCITE. PART 4 57-50-11 FIGURE 4 PAGE 18 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6071 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 19. LUG F 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6071-P | BOEING POSITIONER (LUG F), LUCITE. PART 4 57-50-11 FIGURE 4 PAGE 20 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6072 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 21. LUG H 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6072-P | BOEING POSITIONER (LUG H), LUCITE. PART 4 57-50-11 FIGURE 4 PAGE 22 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6073 | BOEING REFERENCE STANDARD PART 4 54-50-11 FIGURE 4 PAGE 23. LUG G 4340M STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6073-P | BOEING LUCITE POSITIONER (LUG ) LUCITE. USED WITH NDT6073. PART 4 57-50-11 FIGURE 4 PAGE 24 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6074 | BOEING REFERENCE STANDARD 767 PART 4 54-50-10 FIGURE 2 PAGE 7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6075 | BOEING REFERENCE STANDARD 767 PART 6 53-10-22 FIGURE 2 PAGE 5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT607A | BOEING REFERENCE STANDARD 767 Part 6 53-80-02 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6080 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6081 | BOEING REFERENCE STANDARD 767 PART 4 54-50-16 PAGE 5 FIGURE 2 MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6082 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 13 Figure 2. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6083 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 14 Figure 3. Material: 7075-T7 or 7075-T6, 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6084 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 15 Figure 4. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6085 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 16 Figure 5. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6086 | BOEING REFERENCE STANDARD 767 Part 4 54-50-13 Page 17 Figure 6. Material: 7075-T6 or 7075-T7, 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6088 | BOEING REFERENCE STANDARD 767 PART 4 54-50-12 PAGE 9 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 35-37 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089-G1 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089-G2 | BOEING TRANSDUCER GUIDE FOR NDT6089 BAT #1. MATERIAL: ACETAL(DELRIN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089-G3 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089-G4 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089-G5 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6089-G6 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6090 | BOEING REFERENCE STANDARD 767 PART 4 54-50-15 PAGE 38-40 FIGURE 10 SHEETS 1-3. MATERIAL: 15-5PH STEEL.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6090-G1 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6090-G2 | BOEING TRANSDUCER GUIDE FOR NDT6090 BAT #3. MATERIAL: ACETAL(DELRIN) 767 PART 4 54-50-15 PAGE 28 FIGURE 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6091 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 26 FIGURE 2. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6092 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 27 FIGURE 3. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6094 | BOEING REFERENCE STANDARD 767 PART 4 54-50-14 PAGE 29 FIGURE 5. MATERIAL: 15-5 CRES. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6096 | BOEING REFERENCE STANDARD 767 PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 2024-T3 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6099 | BOEING REFERENCE STANDARD PER MARKUP 767 PT 4 57-20-01 PAGE 4 FIGURE 2 | 2 | |
| NDT6100 | BOEING REFERENCE STANDARD 767 PART 4 57-10-03 PAGE 6 FIGURE 2 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6102 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6103 | BOEING REFERENCE STANDARD 767 PART 4 54-50-17 PAGE 5 FIGURE 2. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6104 | BOEING REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. Includes Test Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6108 | BOEING REFERENCE STANDARD 767 PT 4 57-20-03, Figure 4 Page 9. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6109 | BOEING REFERENCE STANDARD BOEING REFERENCE STANDARD 767 PART 6 57-20-01. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. MATERIAL: 7075-T6, 2024-T3 CLADBARE ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT611 | Boeing Standard, 767 PT6 54-51-02: FIG2 PG9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT6110A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1 | 2 | |
| NDT6110B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT6110C | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
| NDT6110D | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110E | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1 | 2 | |
| NDT6111A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6111B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT612 | Boeing Standard 767 PT6 54-51-02: FIG2 PG9 | 1 | |
| NDT613 | BOEING REFERENCE STANDARD 767 PT 6 54-51-01 FIGURE 2 PAGE 8. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT614 | BOEING REFERENCE STANDARD 767 PART 4 57-20-01 PAGE 4 FIGURE 2. MATERIAL: 2024-T37075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT615 | Boeing Standard, 767 PT4 53-80-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT616 | BOEING REFERENCE STANDARD 767 Part 4 27-40-01 Page 4 Figure 2. Matierial: 7075-T7 (Preferred) or 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT616P | BOEING 767 CONVEX TRANSDUCER POSITIONER PART 4 27-40-01 PAGE 5 FIGURE 3. MATERIAL: PLEXIGLASSEQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT617 | Boeing Standard, 767 PT6 53-80-03:PG10 FIG2 | 3 | |
| NDT618 | BOEING REFERENCE STANDARD 767 Part 6 53-80-03 Page 7 Figure 3. Material: 4330M or 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT618A | Boeing Standard, 767 PT6 53-80-03:PG12 FIG4 | 3 | |
| NDT619 | Boeing Standard, 767 PT4 55-10-04 PG 5 FG 2 | 3 | |
| NDT619P | Boeing Transducer Shoe | 2 | |
| NDT620 | Boeing Standard | 2 | |
| NDT621 | Boeing Standard, 767 PT4 57-10-01; Page 5, Figure 1 | 4 | |
| NDT622 | Boeing Standard, 767 PT6 57-20-01:PG5 FIG2 | 4 | |
| NDT623 | Boeing Standard, 767 PT4 57-10-03: PG5 FIG2 | 3 | |
| NDT624 | BOEING REFERENCE STANDARD 767 Part 4 53-80-02 Page 6 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT625 | Boeing Standard, 767 PT4 55-10-03:PG4 FIG2 | 1 | |
| NDT627 | Boeing Standard, 767 PT4 57-10-02:PG 3 FIG 3 | 1 | |
| NDT628 | BOEING REFERENCE STANDARD 767 PT 4 53-50-01. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT629 | BOEING COMPOSITE REFERENCE STANDARD 767 PT 4 57-40-01. AULUMINUM TO ALUMINUM HONEYCOMB CORE. INCLUDES C-SCAN REPORT AND CERTIFICATE OF CONFORMANCE. 2 YEAR UNCONDITIONAL WARRANTY. | 2 | |
| NDT630 | BOEING REFERENCE STANDARD 767 Part 4 55-10-02 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT631 | BOEING REFERENCE STANDARD 767 Part 4 71-20-01 Page 6 Figure 2. Material: 15-5 PH or 4130, 4140, 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT632 | BOEING REFERENCE STANDARD 767 Part 4 71-20-01 Page 7 Figure 3. Material: 15-5 PH or 4130, 4140, 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT633 | Boeing Standard, 767 PT6 54-51-02: FIG2 PG9 | 2 | |
| NDT634 | BOEING REFERENCE STANDARD 767 Part 4 54-50-02 Page 5 Figure 2. Material: 15-5PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT636 | Boeing Standard, 767 PT4 32-10-02:PG5 FIG2 *Bushing needs to be purchased | 2 | |
| NDT637 | Boeing Standard, 767 PT4 32-10-04:PG7 FIG2 *NO BID* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT637P1 | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-04 Page 9 Figure 3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT637P2 | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-04 Page 10 Figure 3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT637P3 | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-04 Page 11 Figure 3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT638 | BOEING REFERENCE STA | 2 | |
| NDT638G | BOEING TRANSDUCER POSITIONER 767 Part 4 57-40-02 Page 7 Figure 4. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT638PL | BOEING TRANSDUCER GUIDE 767 Part 4 57-40-02 Page 6 Figure3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT638PR | BOEING TRANSDUCER GUIDE 767 Part 4 57-40-02 Page 6 Figure3. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT639 | BOEING REFERENCE STANDARD 767 PART 4 54-50-02 PAGE | 2 | |
| NDT640 | BOEING REFERENCE STANDARD 767 Part 4 54-50-01 Page 5 Figure 2. Material: 15-5 PH or 4330M, 4340M. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT641 | Boeing Standard, 767 PT4 54-50-01:PG5 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT642 | Boeing Standard, 767 PT4 53-50-02:PG6 FIG2 | 2 | |
| NDT643 | Boeing Standard, 767 PT6 57-20-03:PG7 FIG 2 | 5 | |
| NDT643-.750 | Boeing Standard, Based on NDT643 with .750 countersink, two fastener holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT644 | Boeing Standard, 767 PT4 57-20-02:PG6 FIG3 | 4 | |
| NDT648 | Boeing Standard 767 PT6 53-30-06 PG 31 FG 3 | 3 | |
| NDT650 | Boeing Standard, 767 PART6 57-04-01, Drawing No. FIG 2 | 1 | |
| NDT651 | BOEING REFERENCE STANDARD 767, 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT652 | BOEING REFERENCE STANDARD 767 PT 6 57-20-07 FASTENER (BACB30YP10K6) Includes Test Report and Certificate of Conformance | 4 | |
| NDT655 | Boeing Standard, 767 PT4 54-50-03:PG7 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT655G | Boeing Standard, 767 PT4 54-50-03:PG9 FIG4 Tranducer Guides | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT656 | Boeing Standard, 767 PT4 54-50-03:PG8 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT656G | BOEING TRANSDUCER GUIDE 767 Part 4 54-50-03 Page 9 Figure 4. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT657 | Boeing Standard,767 PT6 53-10-09: PG7 FIG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT658 | BOEING REFERENCE STANDARD 767 Part 4 53-10-01 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT660 | BOEING REFERENCE STANDARD 767 Part 6 53-80-04 Page 11 Figure 3. Material: 7075-T6 Bare and Clad. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT661 | BOEING REFERENCE STANDARD 767 Part 4 53-30-01 Page 5 Figure 2. Material: 7075-T6 or 7075-T7. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT662 | BOEING REFERENCE STANDARD 767 PT 4 57-20-03, FIGURE 2 PAGE 7. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT663A | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT663A/B | Boeing Reference Standard, 767 PT6 53-10-13:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT663B | BOEING REFERENCE STANDARD 767 Part 6 53-10-13 Page 7 Figure 3. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT664 | BOEING REFERENCE STANDARD 767 PART 6 57-20-06 PAGE | 3 | |
| NDT664-A | BOEING REFERENCE STANDARD 767 PART 6 57-20-06. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT665 | Boeing Standard,767 PT6 53-10-06: PG6 FIG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT666A | Boeing Standard, 767 PT6 57-20-08:PG 8 FIG 3 | 2 | |
| NDT666B | Boeing Standard, 767 PT6 57-20-08:PG 9 FIG 4 | 2 | |
| NDT666C | Boeing Standard, 767 PT6 57-20-08:PG 10 FIG 5 | 2 | |
| NDT667 | BOEING REFERENCE STANDARD 767 Part 4 54-50-05 Page 7 Figure 2. Material: 15-5 PH or 4130. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT668 | Boeing Standard, 767 PT6 57-50-01 | 3 | |
| NDT669 | BOEING REFERENCE STANDARD 767 Part 4 3210-05 Page 5 Figure 2. Material: 4330 or 4340. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT669P | BOEING TRANSDUCER POSITIONER 767 Part 4 32-10-05 Page 6 Figure 3. Material: Plexiglass. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT670 | BOEING REFERENCE STANDARD 767 Part 4 53-10-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT671 | BOEING REFERENCE STANDARD 767 Part 6 53-30-12 Page 4 Figure 2. Material: 7075-T6 or 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT672 | BOEING REFERENCE STANDARD 767 Part 6 54-50-01 Page 4 Figure 2. Material: 15-5 PH or 4130. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT674 | BOEING REFERENCE STANDARD 767 PT 4 54-50-06 PAGE 14 FIGURE 3. Includes Certification Report. | 3 | |
| NDT675 | Boeing Standard, 767 PT4 54-50-06:PG15 FIG4 *NO BID* | 3 | |
| NDT676 | BOEING STANDARD, 767 PT6 54-50-07:PG8 FIG2 | 2 | |
| NDT679 | BOEING STANDARD, 767 PT4 53-50-05: PG7 FIG3 | 2 | |
| NDT680 | Boeing Standard, 767 PT4 32-10-06:PG7 FIG 2 | 2 | |
| NDT682 | BOEING REFERENCE STA | 4 | |
| NDT684 | BOEING REFERENCE STANDARD 767 Part 6 52-32-02 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT685 | BOEING REFERENCE STANDARD 767 Part 6 53-10-018 Page 5 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT686 | Boeing Standard, 767 PT6 53-50-09, PG5, FIG3 | 3 | |
| NDT687 | BOEING REFERENCE STANDARD 767 PT 4 57-50-08 PAGE 6 FIGURE 3. . Includes Test Report and Certificate of Conformance. | 2 | |
| NDT688 | BOEING REFERENCE STANDARD 767 Part 4 57-50-03 Page 8 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance | 3 | |
| NDT689 | BOEING REFERENCE STANDARD 767 PART 4 57-50-06 PAGE 6 FIGURE 2. MATERIAL: 4340. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT689-P | Boeing Positioner 767 PT4 57-50-06: PG7 FIG 3 | 3 | |
| NDT689P | BOEING TRANSDUCER POSTIONER 767 PART 4 57-540-06 PAGE 7 FIGURE 3. MATERIAL: DELRIN. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT690 | Boeing Standard, 767 PT4 57-50-04:PG8 FIG3, TC8-1210H | 3 | |
| NDT691 | BOEING REFERENCE STANDARD 767 Part 6 57-50-08 Page 6 Figure 2. Material: 4340M. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT693 | BOEING REFERENCE STANDARD 767 Part 4 53-50-04 Page 6 Figure 4. Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT694 | Boeing Standard, 767 PT4 57-50-05:PG8 FIG3 | 3 | |
| NDT695 | BOEING REFERENCE STANDARD 767 Part 4 57-50-05 Page 8 Figure 3. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT697 | BOEING REFERENCE STANDARD 767 Part 4 -57-50-07 Page 5 Figure 2. Material: 15-5 PH. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT697-400 | Boeing Standard, 767-400 Modified NDT697 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT698 | BOEING REFERENCE STANDARD 767 PART 4 57-50-03 PAGE | 3 | |
| NDT7001P | BOEING LUCITE WEDGE WITH A .315"Ø FLAT BOTTOM HOLE, 2.010" RADIUS FOR A .25"Ø STRAIGHT BEAM TRANSDUCER. USED WITH REFERENCE STANDARD NDT7001. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT7005 | REFERENCE STANDARD NDT7005 BOEING777 | 2 | |
| NDT700A | Boeing Standard 767 57-50-04 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT700B | Boeing Standard 767 57-50-04 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT700C | Boeing Standard 767 57-50-04 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT700D | Boeing Standard 767 57-50-04 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT700E | Boeing Standard 767 57-50-04 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT7010A | BOEING REFERENCE STANDARD | 1 | |
| NDT7010B | BOEING REFERENCE STANDARD | 1 | |
| NDT7011 | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT7013 | BOEING REFERENCE STANDARD | 1 | |
| NDT7015-A | BOEING REFERENCE STANDARD | 1 | |
| NDT7015-B | BOEING REFERENCE STANDARD | 1 | |
| NDT702 | Composite Std, Boeing Std PART 4 51-00-08 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT7023 | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT7024 | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT703 | Boeing 777 Reference Standard, Part 6, 57-60-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT7031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751,AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 2 | |
| NDT7031B | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 11-12 FIGURE 2, SHEET 1&2 AND PART 4 57-20-13 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIR | 2 | |
| NDT7031C | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 13 FIGURE 2, SHEET 3. MATERIAL: 7055-T7751,AIRPLANE QUALITY ALUMINUM. INCLUDES TEST RE | 1 | |
| NDT705 | Boeing 777 Reference Standard, Part 6, 57-40-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT706 | BOEING STANDARD, 777 PT6 53-10-01:FIG2 PG5 | 2 | |
| NDT706P | Boeing Standard | 3 | |
| NDT707 | Boeing Standard PT4 52-80-01 page 6 777 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT708 | Boeing 777 Reference Standard, Part 6, 53-50-01 | 1 | |
| NDT709 | Boeing 777 Reference Standard, UT, Part 4, 57-60-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT710 | BOEING 777 REFERENCE STANDARD, PART 6, 54-51-01 | 2 | |
| NDT711 | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 9 FIGURE 2. Includes Certificate of Conformance. | 2 | |
| NDT712 | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 9 FIGURE 2. Includes Certificate of Conformance. | 2 | |
| NDT713 | Boeing Standard 777 PT6 53-10-02:PG9 FIG2 SHEET1,2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT714 | BOEING STANDARD 777 | 2 | |
| NDT716 | Boeing Standard, SB 777-32A0038:PG41 FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT717 | Boeing Standard, 777 PT4 57-20-01:PG8 FIG2 SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT718 | Boeing Standard, 777 PT4 57-20-01:PG9 FIG2 SHEET2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT719 | Boeing Standard, 777 PT4 57-20-01:PG10 FIG2 SHEET3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT722-P1 | BOEING 777 POSITIONER PART 6 55-17-02, PAGE 7 FIGURE 2 Includes Test Report and Certificate of Conformance | 2 | |
| NDT722-P2 | BOEING 777 POSITIONER PART 6 55-17-02, PAGE 8 FIGURE 3 Includes Test Report and Certificate of Conformance | 2 | |
| NDT722-P3 | BOEING 777 POSITIONER PART 6 55-17-02, PAGE 9 FIGURE 4 Includes Test Report and Certificate of Conformance | 2 | |
| NDT724 | Boeing Standard, 15-5PH Stainless | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT725 | Boeing Standard 777 55-17-01 PT4 PG8-9 Fig 2 | 2 | |
| NDT725P1 | Transducer Positioner Boeing 777 55-17-01 PT4 Pg 10 Fig 3 | 2 | |
| NDT725P2 | Transducer Postioner Boeing 777 55-17-01 PT4 Pg 11 Fig 4 | 2 | |
| NDT726 | Boeing Standard, Heat Teat to 180-200 KSI per MIL-H-6875 or BAC5619 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT728 | Boeing Standard, 777 PT4 53-20-02:FIG2 | 1 | |
| NDT729 | Boeing Standard 777 PT4 53-10-03 PG4 FG2 | 1 | |
| NDT730 | Boeing Standard 777 PT4 57-54-01 PG6 FG2 | 1 | |
| NDT731 | BOEING REFERENCE STANDARD 777 Part 4 53-40-01 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT732 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT732A | BOEING REFERENCE STANDARD 777 Part 6 55-17-03 Page 7 Figure 2. Material: 6AL-4V. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT732B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT733 | BOEING REFERENCE STANDARD 777 Part 4 53-40-03 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT734 | Boeing Standard 777 PT4 57-54-02 PG8 FG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT734G1 | Boeing Transducer Guide 777 PT4 57-54-02 PG9 FG5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT734P1 | Boeing Transducer Positioner 777 PT4 57-54-02 PG6 FG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT734P2L | Boeing Transducer Positioner 777 PT4 57-54-02 PG7 FG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT734P2R | Boeing Transducer Positioner Part 4 57-54-02 Page 7 Figure 3. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT735 | BOEING REFERENCE STANDARD 777 Part 4 53-40-02 Page 6 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT736 | BOEING 777 REFERENCE STANDARD PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT737 | BOEING REFERENCE STANDARD 777 Part 6 53-50-03 Page 9 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT738 | BOEING REFERENCE STANDARD 777 Part 4 53-10-02 Page 6 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT739 | BOEING REFERENCE STANDARD 777 Part 4 53-10-02 Page 7 Figure 3. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT740 | Boeing Standard 777 PT4 53-10-01 PG6 FG2 | 1 | |
| NDT741 | BOEING REFERENCE STANDARD 777 PT 4 57-12-01 PAGE 7 FIGURE 2. Includes Test Report and Certificate of Conformance | 1 | |
| NDT742B | Boeing Reference Standard, RIB 34 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT742C | Boeing Reference Standard, RIB 36 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT742D | Boeing Reference Standard, RIB 37 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT744 | BOEING REFERENCE STANDARD 777 Part 6 53-10-09 Page 4 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT745 | BOEING STANDARD 777 PT6 57-20-01 PG7 FG2 | 2 | |
| NDT746 | BOEING REFERENCE STANDARD 777 Part 6 53-60-07 Page 7 Figure 2. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT747 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT747-1 | Boeing Standard 777 PT6 53-00-11 PG 33 Fig 2 | 1 | |
| NDT747-2 | Boeing Standard 777 PT6 53-00-11 PG 34 Fig 3 | 1 | |
| NDT748 | Boeing Standard 777 PT4 54-51-01 PG 14 Fig 2 | 1 | |
| NDT749 | Boeing Reference Standard 777 PT6 57-20-03 PG 7 FG 2 | 2 | |
| NDT750 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT751 | Boeing Standard, Ø1.62 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT752 | Boeing Standard, Ø1.747 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT753 | Boeing Standard | 2 | |
| NDT754 | BOEING 777 REFERENCE STANDARD PART 6 53-80-03 FIGURE 3 PAGE 5. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT755 | BOEING REFERENCE STANDARD 777 Part 6 53-60-07 Page 8 Figure 3. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT756 | Boeing Standard 777 53-60-07 PT6 PG 9 Fig 4 | 2 | |
| NDT757 | Boeing Reference Standard 777 PT4 57-20-03 PG 7 FG 2 | 1 | |
| NDT758 | Boeing Standard, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT759 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT760 | BOEING REFERENCE STANDARD 777 Part 6 53-60-06 Page 6 Figure 2. Material: 7075-T7. IncludesTest Report and Certificate of Conformance. | 2 | |
| NDT761 | Boeing Standard | 1 | |
| NDT761 R&D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT762 | Boeing Standard | 2 | |
| NDT763 | BOEING REFERENCE STANDARD | 2 | |
| NDT766 | Boeing Standard 777, 57-10-02 PT4 pg9 | 1 | |
| NDT767 | BOEING REFERENCE STANDARD 777 PT 4 57-10-02 PAGE 11 FIGURE 3. INCLUDESTEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| NDT768 | Boeing Reference Standard 777 PT4 57-10-01 PG 6 FG 2 | 2 | |
| NDT769 | Boeing Reference Standard 777 PT4 57-10-01 PG 7 FG 3 | 2 | |
| NDT770 | BOEING REFERENCE STANDARD 777 PART 4 57-20-05 PAGE 8 FIGURE 2. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT771 | Boeing Reference Standard | 2 | |
| NDT772 | BOEING REFERENCE STANDARD 777 PT 4 57-10-04 FIGURE 4 PAGE 18. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT773 | BOEING REFERENCE STANDARD 777 PT 4 57-10-04 FIGURE 5 PAGE 19. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT773-G1 | Transducer Guide Boeing 777 PT4 57-10-04 PG 20 FG 6 | 2 | |
| NDT774 | Boeing Reference Standard | 2 | |
| NDT775 | Boeing Reference Standard 777 PT6 54-51-15 PG 5 FG 2 | 1 | |
| NDT776 | Boeing Reference Standard 777 PT4 54-51-03 PG 7 FG 2 *make part out of 2024-T3, heat treat to 2024-T8 | 2 | |
| NDT777 | Boeing Standard, FIG2, T6AL-4V | 1 | |
| NDT778 | Boeing Reference Standard, 777 PT4 78-30-05 PG 8-9 FG 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT779 | BOEING REFERENCE STANDARD 777 Part 4 C968754-51-01 Page 15 Figure 3. Material: 15-5PH. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT780-A | BOEING REFERENCE STANDARD 777 PT 4 -57-50-01 Figure 2 Page 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT780-B | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT780-C | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT780-D | Boeing Standard 777 PT4 57-50-01 PG 7 FG 2, TEK-5828-4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT780-E | BOEING REFERENCE STANDARD 777 PT 4 -57-50-01 Figure 2 Page 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT780-F | BOEING REFERENCE STANDARD 777 PT 4 -57-50-01 Figure 2 Page 7. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT781 | BOEING REFERENCE STANDARD 777 PT 6 57-40-02 PAGE 6 FIGURE 2. Includes Test Report and Certificate of Conformance... | 2 | |
| NDT784 | BOEING REFERENCE STANDARD | 1 | |
| NDT785 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT786-A | Boeing Standard 777 PT6 57-10-04 PG 6 FG 2 | 2 | |
| NDT786-B | Boeing Standard 777 PT6 57-10-04 PG 6 FG 2 | 2 | |
| NDT787 | BOEING STANDARD 777 53-80-06 PT6 PG 8 FG 2 | 2 | |
| NDT789 | Boeing Standard 777 PT6 57-20-03 PG 17 FG 3 | 1 | |
| NDT790 | BOEING REFERENCE STANDARD 777 PT 6 57-20-03 PG. 18 FIGURE 4. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT791 | BOEING STANDARD 777 PT6 57-20-03 PG 19 FG 5 | 1 | |
| NDT792 | Boeing Standard 777 PT6 57-20-03 PG 20 FG 6 | 1 | |
| NDT796G | BOEING TRANSDUCER GUIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT797 | BOEING REFERENCE STANDARD 777-200/300 PART 4 53-40-06 PG.11 FIGURE 2. MATERIAL: 7075-T7 ALUMINUM WITH GRAIN DIRECTION. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| NDT799 | BOEING REFERENCE STANDARD 757 Part 4 51-00-05 Page 7 Figure 2. 777-200/300 Part 4 51-00-05 Page 8 Figure 1. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT801 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT803A | BOEING REFERENCE STANDARD ABS PLASTIC THICKNESS MEASUREMENT. PART 4 51-00-07 page 11 figure 2 | 2 | |
| NDT803B | Thick Wedge, ABS Plastic, Boeing 787 PT4 51-00-07 PG 11 FG 2 | 2 | |
| NDT807 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT809 | BOEING STANDARD 787 PT6 51-00-10 PG6 *still in the developing stages | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT815 | BOEING REFERENCE STANDARD 787 Part 4 57-10-01 Page 10 Figure 2. Material: 2024 or 7075 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT816 | BOEING REFERENCE STANDARD 787 part 4 57-10-02 Figure 2. MATERIAL: 6AL-4V TITANIUM. Includes Certification Report and Certificate of Conformance. | 1 | |
| NDT817 | BOEING REFERENCE STANDARD 787 Part 4 51-00-23 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NEC-6252 | boeing ec reference standard w/cert | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NLN | BOEING CAST ACRYLIC POSITIONER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NPN-009 | STAIR, BOEING ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NTG3004-D | GAUGE - TIRE PRESSURE, 0-300 PSIG (BOEING 787) | 3 | |
| OHME65-45888 | SLING, TRANSPORTATION - FORWARD AIRSTAIRS (THE BOEING COMPANY) | 3 | |
| OMNI-MX2 | OMNISCAN MX2 INSTALLED WITH BOEING SOFTWARE AS PER NTM BOEING 51-00-06 AND NTM 51-00-07 | 1 | |
| OMNI-SX | OMNISCAN MX2 INSTALLED WITH BOEING SOFTWARE AS PER NTM BOEING 51-00-06 AND NTM 51-00-07 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P14789-3 | Pitot Test Adaptor - Boeing 727 - 200 | 2 | |
| P14789-4 | Pitot Test Adaptor - Boeing 707 | 8 | |
| P2K-615A-05 | PMAT 2000 KIT, BOEING EFB WITH 615A | 2 | |
| P564A | BOEING TRANSDUCER POSITIONER PT 4 57-50-01 | 2 | |
| P564B | BOEING TRANSDUCER POSITIONER PT 4 57-50-01 | 2 | |
| P6020A | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 9 FIGURE 2. Includes Certificate of Conformance. | 3 | |
| P6020B | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 9 FIGURE 2. Includes Certificate of Conformance. | 3 | |
| P6021A | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 10 FIGURE 3. Includes Certificate of Conformance. | 3 | |
| P6021B | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 10 FIGURE 3. Includes Certificate of Conformance. | 3 | |
| P6021C | BOEING TRANSDUCER POSITIONER 767 PART 4 57-50-14 PAGE 10 FIGURE 3. Includes Certificate of Conformance. | 3 | |
| P75400M-4C | MODEL ADA787-612 (PN P75400M-4C) BOEING B-787 AIR DATA ACCESSORIES KIT | 3 | |
| P75701-3 | BARFIELD P75701-3 STATIC TEST ADAPTER, FOR BOEING, | 9 | |
| P75701M2-3 | PITOT TEST ADAPTER FOR BOEING 737-600/700/800 | 11 | |
| P75701M23 | PITOT ADAPTER HIGH TEMP FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 11 | |
| P77796HT-3 | PITOT TEST ADAPTOR - BOEING 777 | 5 | |
| P8-ET-57-20-04-P006A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-ET-57-20-04-P006B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-ET-57-20-04-P006C | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-ET-57-53-26-301 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-ET-57-53-26-P01 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-GUIDE-P023 | BOEING GUIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-3136 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P001 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P001A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P001B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P001MIDDLE | BOEING STANDARD MIDDLE PLATE ONLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P002 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P003A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P003B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P004A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P004B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P004C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P005 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P005 TEST | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P006B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P007A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P008A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P008B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P009 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P010 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P011 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P012 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P013 | Boeing Standard formally part number 55-10-04--B4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P014 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P016 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P017A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P017B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P017C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P017D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P017E | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P017F | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P018 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P019A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P019B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P020 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P021 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P022A | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P022B | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P022C | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P023 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031C | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031D | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031E | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031F | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P031G | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P033 | Boeing Standard 6AL-4V, 1.375 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P034 | Boeing Standard 6AL-4V, 1.438 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P035 | Boeing Standard 6AL-4V, 1.50 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P036 | Boeing Standard 6AL-4V & 2024-T3 Muti-Layered. 20 Holes, 40 corner notches | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P037-AL | Boeing Standard 2024-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P037-TI | Boeing Standard 6AL-4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P038A | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P038B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P039 | Boeing Standard TI-6AL-4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P3102 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8-STD-P3136 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P8STD-P018B | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PA-0044-A | PITOT STATIC ADAPTOR KIT – BOEING B737-600/700/800/NG/BJ | 2 | |
| PA-FDAB-03-00 | ECR BOEING 737-NG, 767, 777 FUEL DRAIN ADAPTOR | 1 | |
| PAC32P350B | BOEING TIRE INFLATION TOOL SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PF09-020-1 | BOEING 757 TOWBAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PF51-009-1 | Embraer / Boeing Fishpole Hoist | 12 | |
| PF53361PWS | BOEING IDG - B737 / B747 / B767 / B787 | 7 | |
| PF55451-23 | BOEING 737 SHOCK STRUT SERVICING CAR | 6 | |
| PF55951 | OVERFLOW HOSES TO SUIT BOEING IDG | 5 | |
| PROBE GUIDE S41-G1A | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PROBE GUIDE S41-G1B | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PROBE GUIDE S43-G1A,G1B, G1C | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENEEQUIVALENT. | 1 | |
| PSD40-502 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
| PSD40-502-1 | ADAPTER FUEL QTY TEST - BOEING | 2 | |
| PSD40-502-3 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
| PSD40-503 | ADAPTER FUEL QTY TEST - BOEING | 2 | |
| PSD60-503 | ADAPTER FUEL QTY TEST - BOEING | 7 | |
| PSD60-504 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
| PSD737-1 | Boeing 737 Fuel Quantity Interface Unit - Use with PSD60-2R | 9 | |
| PSS-22300 | BOEING PITOT ADAPTOR TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PSS22300-3-4-4 | PITOT TEST ADAPTOR - BOEING 737 CLASSIC - 100, 200 | 10 | |
| PSS44600M-3-4-4 | Pitot Test Adaptor - Boeing 747 - 100, 200 & 300 | 4 | |
| PSS44600M2-3-4-4 | Pitot Test Adaptor - Boeing 747-400 & 747-8 - High Temp | 6 | |
| PSS76700-3-4-4 | Pitot Test Adaptor - Boeing 767 | 6 | |
| PSS76700M2-3-4-4 | PITOT TEST ADAPTOR - BOEING 767 - HIGH TEMP | 6 | |
| PTP-C17A08006 | BOEING C-17 ENGINE INTAKE COVER | 1 | |
| PTP-C17A08007 | BOEING C-17 ENGINE EXHAUST COVER | 1 | |
| PWC56804 | MAINTENANCE STAND (BOEING) | 7 | |
| PXS LDS 10 | PMAT 2000 KIT, BOEING EFB WITH 615A | 4 | |
| PXS-LDS-10 | PMAT 2000 KIT, BOEING EFB WITH 615A | 4 | |
| PXS‐LDS‐10 | PMAT 2000 KIT, BOEING EFB WITH 615A | 4 | |
| R&D-COND--STEEL-15-5 | BOEING STANDARD STEEL 15-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-2024-O | BOEING STANDARD AL 2024-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-2090-TX | BOEING STANDARD AL-2090-TX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-AL-6063-O | BOEING STANDARD AL 6063-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-COPPER | BOEING STANDARD COPPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-STEEL-4340 | BOEING STANDARD STEEL 4340 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-1-Ti-6AL-4V | BOEING STANDARD Ti-6AL-4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-2024-T4 (CLAD) | BOEING STANDARD 2024-T4 CLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-AL-2024-O | BOEING STANDARD AL 2024-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-AL-2024-T6X/T8X | BOEING STANDARD AL2024-T6X/T8X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-AL-2090-TX | BOEING STANDARD AL 2090-TX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-AL-2219-T3 | BOEING STANDARD AL-2219-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-AL-6063-O | BOEING STANDARD AL 6063-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-COPPER | BOEING STANDARD COPPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-STEEL-4340 | BOEING STANDARD STEEL 4340 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-2-Ti-6AL-4V | BOEING STANDARD Ti 6AL-4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-2024-T4(BARE) | BOEING STANDARD AL-2024-T4 BARE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-AL-2024-O | BOEING STANDARD AL 2024-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-AL-2090-TX | BOEING STANDARD AL 2090-TX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-AL-6063-O | BOEING STANDARD AL 6063-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-COPPER | BOEING STANDARD COPPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-STEEL-4340 | BOEING STANDARD STEEL 4340 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-3-Ti-6AL-4V | BOEING STANDARD Ti 6AL-4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-ABS-PLASTIC | BOEING STANDARD ABS PLASTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-2024-O | BOEING STANDARD AL 2024-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-2024-T4(BARE) | BOEING STANDARD AL 2024-T4 BARE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-2024-T4(CLAD) | BOEING STANDARD AL 2024-T4 CLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-2024-T6X/T8X | BOEING STANDARD AL 2024-T6X/T8X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-2090-TX | BOEING STANDARD AL 2090TX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-2219-T3 | BOEING STANDARD AL 2219-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-AL-6063-O | BOEING STANDARD AL 6063-O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-COPPER | BOEING STANDARD COPPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-STEEL-15-5 | BOEING STANDARD STEEL 15-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-STEEL-4340 | BOEING STANDARD STEEL 4340 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-COND-4-Ti-6AL-4V | BOEING STANDARD Ti-6AL-4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-SHEAR WAVE-EDGE-AL | BOEING STANDARD R&D SHEAR WAVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R&D-SHEAR WAVE-EDGE-TI | BOEING REFERENCE STANDARD R&D SHEAR WAVE EDGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R/C-AOAC-2 | AOA COVER-ROSEMOUNT & GULTON STATHAM (CONRAC) VANES-BOEING | 12 | |
| R/C-AOAC-2SPSD | AOA COVER-ROSEMOUNT & GULTON STATHAM (CONRAC) VANES-BOEING | 1 | |
| RBI8100C | Boeing Kit with Imperial tools. In 8 drawer cabinet | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI8100ST | Boeing Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI8100T | BOEING TOOL KIT 189 TOOLS INCH/METRIC | 2 | |
| RBI8100TDR | Boeing Tool Kit | 1 | |
| RBI8406T | Boeing 737-600, -700, -800 Wiring System Maintenance Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI8413T | Maintenance Kit for McDonnell Douglas DC-8, DC-9, DC-10 & Boeing 757 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI8418T | Boeing 747 & 747SP Wiring System Maintenance Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI8422T | Wiring System Service Kit for the Boeing 707, 727, 737-200, 747 & 747SP Aircraft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI8434T | Boeing 737-200, -300, -400, -500 Wiring System Maintenance Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBT230T | Boeing Maintenance Technician Kit | 1 | |
| RC50-16 | JACK - AXLE, MAIN GEAR (FOR BOEING 737) | 1 | |
| RD-AC-1035 | .15” TIP, BOEING 737 FUEL PANE | 1 | |
| RH1601A1A0A01 | 16 TONS NOSE JACK FOR NG FOR BOEING 737 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RH290-C3-304 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Stainless Steel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RH290-C3-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RH290-C30-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RH290-C3C2-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" & .020" corner notches, per Boeing PT6 51-00-00 FIG16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RH290-C50-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .050" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RID31305 | BOEING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RIG564-3128P | BOEING RED SPANNER 20" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RM17-C23-2024T3 | Special Boeing Type Reference Standard, per PT6 51-00-00 Fig 16, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RS05123-7075T6 | Surface Std, Based on 126 from Boeing NDT PT6 51-00-00 FIG23 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RS367SAL | NDT REFERENCE STANDARD 367 BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RS9000-1 | DC9 REFERENCE STANDARD PER BOEING SB DC9-54A031 PAGE 16 FIGURE 1. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSDC6-5 | BOEING REFERENCE STANDARD DC6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSN-2024T3-1 | Navy Reference Standard, 2024T3 Aluminum *.040" +004/-000 countersink notches, similar to Boeing 194 standard* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Radius Shoe .500R | Boeing Custom Contact Radius Shoe 201 with a 0.500" radius with no thru hole. Material: Black ABS. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Radius Shoe 201 | Boeing Custom Contact Radius Shoe 201 with a 0.100" radius. Material: Black Delrin(Acetal). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Radius Shoe 202 | Boeing Custom Contact Radius Shoe 202 with a 0.150" radius. Material: Black Delrin(Acetal). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Radius Shoe 203 | Boeing Custom Contact Radius Shoe 203 with a 0.200" radius. Material: Lucite/Cast Acrylic. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-MP-3 | OLYMPUS RESONANCE PROBOEINGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-PC-P16 | BOEINGONDMASTER PITCH PROBOEINGE | 1 | |
| S-PR-5 | OLYMPUS RESONANCE PROBOEINGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S256A225-1 | TOOL - BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S41-E1A | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1A NDI REF STD PER DRAWING SK667-00011. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S41-E1C | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1C NDI REF STD PER DRAWING SK667-00012. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S41-F1B | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-F1B NDI REF STD PER DRAWING SK667-00010. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S46-C2 | BOEING REFERENCE STANDARD S42-C6 FIGURE 2. MATERIAL: 2024-T3 CLAD. RIVET: BACR15CE6. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S46-G1A/G2A | BOEING REFERENCE STANDARD FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. FASTENERS: BACR15CE6D 2 PLACES. Includes Certification Report. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SB09530186-35 | BOEING STANDARD, SB53-216, PG21 FIG1 SHEET1 | 1 | |
| SCA-200B737 | BOEING 737 SHOCK STRUT SERVICING CART (COM-1532) | 2 | |
| SCA-NAS-777 | BOEING B777-200/300 NLG MLG CHANGE KIT (WHOLE SET). | 1 | |
| SCA-NAS32-737MAX | WHEEL CHANGE KIT (BOEING) | 1 | |
| SCA_NAS787-9-10 | BOEING B787-8/9/10 NLG MLG CHANGE KIT (WHOLE SET). | 1 | |
| SE12-5201 | BOEING-FITTING ASSEMBLY-LUBRICATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SE27-0001 | STRAIGHTEDGE, CONTROL WHEEL (THE BOEING COMPANY) | 21 | |
| SH787STATICP0RTC0VER | COVER: STATIC PORT,PRINTED, BOEING 787 | 1 | |
| SLS-123456-SS304 | BOEING REFERENCE STANDARD PER DRAWING STD-1. MATERIAL: 304 STAINLESS STEEL. CHEMICAL CONVERSION COATING PER MIL-DTL-5541, CLASS 1A. Includes Certification Traceable to NIST and Material Certs. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SLS-IN718-201-010793B2 | BOEING REFERENCE STANDARD, 0.030 x 0.030 x .005" +/- 002" CORNER EDM NOTCH. MATERIAL: 718 INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SN10550000 | BOEING REFERENCE STANDARD SHEETS 1-4. DETAIL -3,-5,-7. MATERIAL: 7075-T7 & 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SN90570006 | BOEING REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-13463 | TEST CABLING - 737 BOEING SKY INTERIOR LIGHT ASSEMBLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1066RB | STANDARD TOOL - RELEASE KEY FOR PIVOT BIN SNUBBER,"BOEING SKY" INTERIOR | 1 | |
| ST1066RB-1 | RELEASE KEY - PIVOT SNUBBER, "BOEING SKY" INTERIORS | 2 | |
| ST1111BK1 | BOEING® Design Anti-Slip Flush Rivet Set with Polyurethane Rim - 3/4" Face | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1111BK2 | BOEING® Design Anti-Slip Flush Rivet Set with Polyurethane Rim - 1" Face | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1111BK3 | BOEING® Design Anti-Slip Flush Rivet Set with Polyurethane Rim - 1-1/4" Face | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112B-C401-4-53 | Boeing® BACR15FT Modified Universal Cutaway Sets ( Rivet Size: 1/8" )( Body Diameter: .281" )( Body Length: 1-3/4" )( Overall Length: 3.31" (84 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112B-C401-5-53 | Boeing® BACR15FT Modified Universal Cutaway Sets ( Rivet Size: 5/32" )( Body Diameter: .312" )( Body Length: 1-3/4" )( Overall Length: 3.31" (84 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112B-C401-6-37 | Boeing® BACR15FT Modified Universal Cutaway Sets ( Rivet Size: 3/16" )( Body Diameter: .656" )( Body Length: 3/4" )( Overall Length: 2.31" (59 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112B-C401-6-53 | Boeing® BACR15FT Modified Universal Cutaway Sets ( Rivet Size: 3/16" )( Body Diameter: .344" )( Body Length: 1-3/4" )( Overall Length: 3.31" (84 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112B-C401-8-37 | Boeing® BACR15FT Modified Universal Cutaway Sets ( Rivet Size: 1/4" )( Body Diameter: .656" )( Body Length: 3/4" )( Overall Length: 2.31" (59 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112B-C401-8-53 | Boeing® BACR15FT Modified Universal Cutaway Sets ( Rivet Size: 1/4" )( Body Diameter: .406" )( Body Length: 1-3/4" )( Overall Length: 3.31" (84 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112MB-C401-4 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 1/8" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112MB-C401-5 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 5/32" )( Type: Straight ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1112MB-C401-6 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 3/16" )( Type: Straight ) | 1 | |
| ST1112MB-C401-7 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 7/32" )( Type: Straight ) | 1 | |
| ST1112MB-C401-8 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 1/4" )( Type: Straight ) | 1 | |
| ST1112MB-R401-4-3 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 1/8" )( Type: Offset ) | 1 | |
| ST1112MB-R401-5-3 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 5/32" )( Type: Offset ) | 1 | |
| ST1112MB-R401-6-3 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 3/16" )( Type: Offset ) | 1 | |
| ST1112MB-R401-7-3 | BOEING® BACR15FT MOD. UNIVERSAL CUTAWAY RIVET SETS,7/32” | 1 | |
| ST1112MB-R401-8-3 | BOEING® BACR15FT MOD. UNIVERSAL CUTAWAY RIVET SETS,1/4” | 1 | |
| ST1112MBR611 | BOEING MODIFIED RIVET SET BACR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1222B-12 | MICRO STOP-COUNTERSINK THE BOEING COMPANY | 1 | |
| ST1230E-1 | BOEING REMOVAL TOOL, COLLAR CUTTER 3/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1230E-10 | BOEING REMOVAL TOOL, COLLAR CUTTER 1/4" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1230E-19 | BOEING REMOVAL TOOL, COLLAR CUTTER 5/16" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1230E-20 | BOEING REMOVAL TOOL, COLLAR CUTTER 3/16" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1230E-24 | BOEING REMOVAL TOOL, COLLAR CUTTER 5/32" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1257B | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.1285", LENGTH 6" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1257B1900-600-1 | 4 FLUTE SOLID CARBIDE STRAIGHT REAMER "DREAMER" UNDER BOEING STANDARD TOOL P/N: ST1257B SIZE: STRAIGHT SHANK, DIAMETER 0.190" LENGTH 6" | 1 | |
| ST1350A/CBC-1 | Puller Unit: ST1350A-0XX Allows FTI LB Nosecap to fit Boeing ST1350A Puller | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1874R | PILOTED STEP REAMER UNDER BOEING STANDARD TOOL P/N: ST1874R SIZE: DIAMETERS 0.190" X 0.158" X 0.126", LENGTH 6" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2109-10 | BOEING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2580-104PA | SOCKET SEAT INSTALLATION ' THE BOEING COMPANY | 1 | |
| ST2599A11140 | RATCH TUBE WRCH 9/16" BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599A32500 | RATCH TUBE WRNCH 7/8" BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599A35360 | RATCH TUBE WRCH 1" BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599A9110 | TORQUE WRENCH BOEING ST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599BOEING | ST2599 BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599C-3A | RATCH TUBE WRN BOEING 5/8IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599C-50A | RATCH TUBE WRN BOEING 11/16IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599C-63A | RATCH TUBE WRN BOEING 1IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2599C-64A | RATCH TUBE WRN BOEING 1IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST732-250 | CUTTER - SCOTCHCAL MARKING MATERIAL (THE BOEING COMPANY) | 1 | |
| ST848 | KIT - INSTALLATION, O-RING SEALS (SET OF 11 TOOLS) (THE BOEING COMPANY) | 15 | |
| ST848R | TOOL - REMOVAL, O-RING (THE BOEING COMPANY) | 9 | |
| ST8709H-X | GAGE - GO/NO-GO, FUEL WIGGINS COUPLING (BACC42R) ; X INDICATES GAGE NUMBER -1 THRU -7 (THE BOEING COMPANY) | 1 | |
| ST878D | KIT - PRESET TUBE FITTING, "SLEEVE SET", FOR PRESETING BACS13AP FLARELESS TUBE FITTING (NOT FOR TITANIUM TUBING) (SET OF (THE BOEING COMPANY) | 9 | |
| ST879A | KIT - PRESET TUBE FITTINGS, MANUAL, MS21922 TUBE FITTINGS (NOT FOR TITANIUM TUBING) (DIE KIT FOR MS21922 FLARELESS TUBE (THE BOEING COMPANY) | 8 | |
| ST879AF | HOLDER - TUBE FITTING, PRESET (THE BOEING COMPANY) | 6 | |
| ST8870-1 | COMPOSITE STANDARD, BOEING ALL PT1 51-04-00:PG21 FIG7 | 4 | |
| ST8870-1-F | COMPOSITE STANDARD, BOEING ALL PT1 51-04-00:PG21 FIG7 *FIBERGLASS SKIN INSTEAD OF CARBON FIBER* | 1 | |
| ST8870-4 | Composite Standard, Boeing All PT1 51-04-00:PG20 FIG6 | 4 | |
| ST8870-4-F | Composite Standard, Boeing All PT1 51-04-00:PG20 FIG6, *Fiberglass skin instead of carbon fiber | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST8870-7 | BOEING CALIBRATION STEP WEDGE | 4 | |
| ST8870-8 | Composite Standard, Boeing All PT1 51-04-00:PG19 FIG8 | 4 | |
| ST8870-9 | Composite Standard, Boeing All PT1 51-04-00:PG19 FIG8 | 3 | |
| ST8870B-7 | BOEING REFERENCE STANDARD | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT PART 1, 51-04-00. INCLUDES C-SCAN, CERTIFICATION REPORT AND CERTIFICATE OF CONFORMANCE. | 3 | |
| ST8870B-9 | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 21-30 PLIES | 3 | |
| ST8870C-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870D | REFERENCE BLOCK (BOEING BONDED STANDARD) | 1 | |
| ST8871D | BOEING COMPOSITE STANDARD | 4 | |
| ST895A-3 | MEASUREMENT PROBE, BOEING | 5 | |
| STANDARD-194 | BOEING REFERENCE_NDT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STANDARD-194A | BOEING REFERENCE_NDT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-6728 | BOEING TOOL WRENCH-0.20 INCH SQUARE DRIVE ( FOR ANGLE GEARBOX ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SUS-1015-10MHZ-70A | BOEING TRANSDUCER, 737, PT4, 52-10-02, PG2-4 *XA-7010T-315, .315 MAX LENGTH* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T0WUNIV5S20SH1TY | HYDRO Universal Boeing Wide Body Towbar | 1 | |
| TBOEINGLFC.030-6 | PROBOEINGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEE61 | TESTER -PMC - CFM56-3 ENGINE 737-300 BOEING | 1 | |
| TEE61/2 | TESTER -PMC - CFM56-3 ENGINE 737-300 BOEING | 1 | |
| TEK-186-2024T3-12 | 12 Hole Reference Standard Similar to Boeing 186, 3/16" to 3/4", with .030" corner and .020" corner notches on the bottom plate, .040 Long x .020 Deep Midwall Notches on the top plate. 2024-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5017A | Positioner, Boeing 767 57-50-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5017B | Positioner, Boeing 767 57-50-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5017C | Positioner, Boeing 767 57-50-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5017D | Positioner, Boeing 767 57-50-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5017E | Positioner, Boeing 767 57-50-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5033 | 5 MHz Transducer .25 dia crystal transducer case is .747 radius to fit in the inner dia of the crossbolt Boeing manual 767 PT4 32-10-03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5047 | Special Boeing TD, 737 PT4 57-50-03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5154 | TRANSDUCER, BOEING 35-¦ IN ALUM AND 42-¦ IN ALUM | 1 | |
| TEK-5542-1 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5542-2 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5543-1 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5543-2 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5544-1 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5544-2 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5545-1 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5545-2 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5546-1 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5546-2 | Boeing Transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P1 | Boeing Positioner, Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P2 | Boeing Positioner, Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P2A | Boeing Positioner AL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P3 | Boeing Positioner, Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P3A | Boeing Positioner AL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P4 | Boeing Positioner, Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P4A | Boeing Positioner, AL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5547P5 | Boeing Positoner Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548/45S | Boeing Transducer, 45deg, .25" Width, Side Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548/45T | Boeing Transducer, 45deg, .25" Width, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548/60S | Boeing Transducer, 60deg, .25" Width, Side Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548/60T | Boeing Transducer, 60deg, .25" Width, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548/70S | Boeing Transducer, 70deg, .25" Width, Side Mount | 1 | |
| TEK-5548/70T | Boeing Transducer, 70deg, .25" Width, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548S | Boeing Transducer, 70deg, .25" Width, Side Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5548T | Boeing Transducer, 70deg, .25" Width, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5549 | Boeing Transducer, 737, PT4, 52-10-02, PG2-4 *XA-7010T-315, .315 max length* | 1 | |
| TEK-5831 | Boeing Transducer for STD 787-9-HS-7 5MHZ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5832 | Boeing Transducer for STD 787-9-HS-7 5MHZ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5833 | Boeing Transducer for STD 787-9-HS-7 5MHZ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5834 | Boeing Transducer 35 deg Steel 5 MHz 8" flexible handle 2.05 radius back shooter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5835 | Boeing Transducer 51 deg Steel 5 MHz 8" flexible handle 2.05 radius back shooter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5839 | BOEING TRANSDUCER FOR STD 787-9-HS-10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-5845 | Boeing Transducer 10 MHZ .125 Element swivel transducer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-6803-1 | BOEING 767 PT4 51-00-04 I/B AFT FLAP, 2024T3 .032" inner surface, 1 ply middle, 2 plies outer, BMS 8-219 Style 285 & BMS 4-4 Type 3-10N Form A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-6803-2 | BOEING 767 PT4 51-00-04 O/B AFT FLAP, 19 Plies inner, 18 Plies middle, 36 Plies outer, BMS 8-79 TYPE 120 & BMS 8-124, CL IV, TY V, GR 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-6803-3 | BOEING 767 PT4 51-00-04 O/B AFT FLAP, 19 Plies inner, 18 Plies middle, 36 Plies outer, BMS 8-79 TYPE 1581 & BMS 8-124, CL IV, TY V, GR 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-6803-4 | BOEING 767 PT9 51-00-02 I/B FLAP COVE PANEL, 1 Ply inner, 1 Ply middle, 1 Ply outer, BMS 8-79 TYPE 1581, BMS 8-168 STYLE 3K-70-PW & BMS 8-124, CL IV, TY V, GR 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-6803-5 | BOEING 767 PT9 51-00-02 O/B FLAP TRAILING EDGE WEDGE, 1 Ply inner, 1 Ply middle, 1 Ply outer, BMS 8-79 TYPE 120 & BMS 8-124, CL IV, TY V, GR 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-9015L | Transducer to be used with NDT6052, Boeing 767 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEK-9015R | Transducer to be used with NDT6052, Boeing 767 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEKIT-2011 | North Boeing Field & Renton Pencil Probe Kit, Includes; PENFLX903-8, PENFLX-8, PENFLX95-7, PEN-4, PEN92-5B, PEN92-4B, BL445-6, BL045-6, PEN45-6/2M, PEN45-5, PEN95-3, PENU95-6/2M, TPEND95-6, BNC-P2D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEKIT-396 | Boeing Reference Standards, 737 PT6 53-30-44, PG7 FIG 2, Kit includes NDT396-36/36, NDT396-40/40, NDT396-45/40, NDT396-50/40, NDT396-56/40, Pelican case 1150 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMHCR01-40-00 | AXLE JACK AIRBUS & BOEING | 2 | |
| TP-126 | Boeing reference standard; 51-00-00 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TS-UA1401-01 | TEST SET - ARINC 717 / ARINC 573. FOR BOEING 737, 757, & 767 FLIGHT RECORDER SYSTEM TEST. | 2 | |
| U8860842 | Boeing reference standard, NDT-398 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| UT-8550-7-6 | SEAL IN COMPLIANCE WITH BOEING SPECIFICATION D33101-44,P/N UT-8550-7-6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| UT6911B-24-2 | WARNING STREAMER - BOEING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| W-19-1 | Boeing W-19 Reference Standard.-1 Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| W-87 REF STD IBD | BOEING REFERENCE STANDARD. W-87 INBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| W-87 REF STD OBD | BOEING REFERENCE STANDARD. W-87 OUTBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WASHKIT | WASHKIT BOEING | 1 | |
| WASHKIT BOEING | WASHKIT BOEING | 1 | |
| WNG-3-NDI-001-10 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-001-5 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-001-6 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-002-7 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-002-8 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-011-10 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-011-5 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-011-6 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-011-7 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-011-8 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-011-9 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-012-10 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-012-5 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-012-6 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-012-7 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-012-8 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDI-012-9 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDT-001-5 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDT-001-7 | BOEING STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDT-001-8 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WNG-3-NDT-001-9 | Boeing Standard | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WS400 | Boeing Custom Contact Radius Shoe WS400 with a 0.400" radius. Material: Lucite/Cast Acrylic. 787 Part 4 51-00-23. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WTR 13B | MAINTENANCE STAIRS 13 STAIRS BOEING | 1 | |
| XLR-9703-01 | AUTOMATED LOOP AND JOINT RESISTANCE TESTER FOR BOEING AIRCRAFT MODELS 737,747,757,767,777,787 AND KS46, P8, E8 | 3 | |
| ZC12-DEL-3C1N | Composite Standard, Boeing All PT1 51-01-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| https://www.newark.com/search?st=aa-400-128-mk3-el-kit-120 | BOEING HEAT GUN | 1 | |
| A71015-157 | BOEING SPECIAL TOOLS | 6 | |
| C21005-70 | BOEING SPECIAL TOOLS | 8 | |
| J71006-1 | POWERED HOIST SYSTEM FOR BOEING 777-200/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
