Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
ANITA OT9701 | COMPOSITE | 1 | |
OT9701 | COMPOSITE | 1 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
(CALIB) C12-PCS-3C1N | REFERENCE STANDARD COMPOSITE (CALIBRATION) | 1 | |
(CALIB) TEK-SWREF1 | COMPOSITE STANDARD (CALIBRATION) | 1 | |
1036859 | SHOP SET, COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
107CNDD | COMPOSITE NU | 1 | |
12L1100-36 | Dotco® Extension Die Grinders Composite Housing, 0.3 Hp (.22 KW) - 1/4" Collet ( Extension: 3" )( Overall Length: 8.9" (226 Mm) )( Rpm (no Load): 28000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12L1101-36 | Dotco® Extension Die Grinders Composite Housing, 0.3 Hp (.22 KW) - 1/4" Collet ( Extension: 5" )( Overall Length: 10.9" (277 Mm) )( Rpm (no Load): 28000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12L1111-36 | Dotco® Extension Die Grinders Composite Housing, 0.3 Hp (.22 KW) - 1/4" Collet ( Extension: 3" )( Overall Length: 8.9" (226 Mm) )( Rpm (no Load): 25000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12L1112-36 | Dotco® Extension Die Grinders Composite Housing, 0.3 Hp (.22 KW) - 1/4" Collet ( Extension: 5" )( Overall Length: 10.9" (277 Mm) )( Rpm (no Load): 25000 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12LF200-32 | Dotco® Right Angle Disc Sanders ( Capacity: 3" )( Exhaust Type: Front )( Rpm: 12,000 )( Type: Composite Housing - 1/4"-28 Int. Thread ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12LF200-36 | DOTCO® RIGHT ANGLE DISC SANDERS COMPOSITE HOUSING MODELS | 1 | |
12LF201-32 | Dotco® Right Angle Disc Sanders ( Capacity: 2" )( Exhaust Type: Front )( Rpm: 20,000 )( Type: Composite Housing - 1/4"-28 Int. Thread ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12LF201-36 | DOTCO® RIGHT ANGLE DISC SANDERS ( CAPACITY: 2" )( EXHAUST TYPE: FRONT )( RPM: 20,000 )( TYPE: COMPOSITE HOUSING - 1/4" COLLET ) | 1 | |
12LF280-36 | Dotco® Right Angle Disc Sanders ( Capacity: 3" )( Exhaust Type: Rear )( Rpm: 12,000 )( Type: Composite Housing - 1/4" Collet ) | 2 | |
12LF281-36 | Dotco® Right Angle Disc Sanders ( Capacity: 2" )( Exhaust Type: Rear )( Rpm: 20,000 )( Type: Composite Housing - 1/4" Collet ) | 5 | |
15-94300 | Dynabrade® Dynaswivel Air Line Connectors ( Type: No-Mar Composite )( Thread Size: 1/4" NPT )( Recommended Air Flow: 0 To 33 CFM ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2828A73 | 5/32" DIA, COMPOSITE DRILL | 1 | |
2828A74 | COMPOSITE DRILL | 1 | |
291420 | COMPOSITE FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330A93-2060-00 | MOUNT,COMPOSITE BLADE SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330A94-2009-00 | MOUNT,CLINOMETER COMPOSITE BLADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
342-1/4" | SOLID CARBIDE DRILL FOR KEVLAR AND GRAPHITE COMPOSITES | 1 | |
342-1/8" | SOLID CARBIDE DRILL FOR KEVLAR AND GRAPHITE COMPOSITES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
342-3/16" | SOLID CARBIDE DRILL FOR KEVLAR AND GRAPHITE COMPOSITES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
342-3/32" | SOLID CARBIDE DRILL FOR KEVLAR AND GRAPHITE COMPOSITES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
342-5/32" | SOLID CARBIDE DRILL FOR KEVLAR AND GRAPHITE COMPOSITES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
35RDC | TESTER COMPOSITE DEM | 2 | |
42/749 | MC-21 COMPOSITE HOIST KIT | 1 | |
455PDE-4-.086 | 100° COMPOSITE COUNTERSINK CUTTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
48054-B | HIGH PERFORMANCE SOLID CARBIDE FIBERGLASS & COMPOSITE CUTTING 1/4 D | 1 | |
49-SB3S | COMPOSITE CUTTING TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB3U | COMPOSITE CUTTING TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5013 | 1/2IN RATCHET W/COMPOSITE GRIP | 1 | |
5056 | COMPOSITE GR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53-70458 | USATCO PRO COMPOSITE TOOL KIT | 1 | |
5338A | IMPACT 3/8IN COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5350A | IMPACT 1/2IN COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5375A | IMPACT 3/4IN COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5375AP | IMPACT 3/4IN COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
55D1407291000 | AIRBUS COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
600-091-12 | COMPOSITE HEX COUPLING WRENCH | 2 | |
600-091-KC | COMPOSITE HEX COUPLING WRENCH | 1 | |
600-157-12 | COMPOSITE HEX COUPLING WRENCH | 2 | |
61564 | COMPOSITE DAMAGE CHECKER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
68D050071-1001 | TOOL KIT REPAIR COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
70-700-CRK-041 | COMPOSITE REPAIR KIT | 1 | |
8024-2 BONDER | CONSOLE - HOT BONDER, REPAIR COMPOSITE STRUCTURES (AUTOMATIC OPERATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8024-2E | COMPOSITE REPAIR CONSOLE (HOT BONDER) ATACS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
805984-11 | CYLINDER, COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
807659-508 | TOOL-INSTALLATION, COMPOSITE SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8500 | Heatcon Composite System | 5 | |
92/349 | COMPOSITE KIT (APU) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
94300 | DYNABRADE 1/4" NPT COMPOSITE DYNASWIVEL | AIR LINE ACCESSORY | 1 | |
95-92015-0001 | ENGINE CONTROL RIGGING SET- TO CA-A-GE-71-02-00A-066A-A-COMPOSITE SET | 1 | |
98S57205030-004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 | 5 | |
98S57205030.001 | CAL BLOCK COMPOSITE | 4 | |
98S57205030.004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 5 | |
99A55307306000 | REFERENCE BLOCK (COMPOSITE) | 2 | |
99D51407291001 | AIRBUS COMPOSITE REFERENCE STANDARD KIT | 7 | |
99D55109001000 | AIRBUS COMPOSITE REF | 7 | |
A16A11033-1 | PARTS KIT REFERENCE SKINS COMPOSITE LAMINATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A6AFR02 | COMPOSITE & METAL REPAIRS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ABATH | COMPOSITE TAP HAMMER | 1 | |
ABM-0710-45T | ANGLE BEAM TRANSDUCER, 4MHz 45° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ABM-0710-60T | ANGLE BEAM TRANSDUCER, 4MHz 60° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ABM-0710-70T | ANGLE BEAM TRANSDUCER, 4MHz 70° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ACRFP-10 | COMPOSITE STEPWEDGE .05-.90" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADL-525HD | 5 MHz .25" DUAL ELEMENT PIEZOCOMPOSITE TRANSDUCER WITH DUAL MICRODOT CONNECTORS. PERSPLEX FACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFC-1050S | SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER 10.0MHZ PIEZOCOMPOSITE ELEMENT, .500"Ø SUPPPLIED WITH A END MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFC-C550 | 5MHZ 1/2" DIA STRAIGHT BEAM COMPOSITE ELEMENT TRANSDUCER SIDE CONNECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFC-K1SM | 1.0 MHz 1.0 inch diameter element straight beam compression transducer used for the inspection of composite materials. | 1 | |
AFCS-250T | SINGLE ELEMENT COMPOSITE FINGER TIP CONTACT TRANSDUCER 2.25MHZ, .500"Ø WITH MICRODOT CONNECTOR,(5/8-24 thread,MSWQC STYLE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-5000 | COMPOSITE STEP WEDGE SOLID CFRP TAPE, BMS 8-276 Cytec. PAD SIZE: 3.0" WIDE by 2.0" LONG. STEP SIZES .100” to 1.0” in INCREMENTS of .100". | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0635AG | 5MHZ 40° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0635AGR | 5MHZ 40° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0636AG | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0636AGR | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0637AG | 5MHZ 50° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0637AGR | 5MHZ 50° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0638AG | 5MHZ 55° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0638AGR | 5MHZ 55° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0639 | 5MHZ 60° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0639AG | 5MHZ 60° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0639AGR | 5MHZ 60° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0640AG | 5MHZ 65° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0641AG | 5MHZ 70° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0642AG | 5MHZ 75° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0668LPR | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .400" x .250" x .630". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0672LP | 5MHZ 65° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-0674LP | 5MHZ 75° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1178 | 6 MHz 70 Degree Angle Beam Broadband Transducer Case Size .275" x .275" x .630" , Top Mount Microdot Connector composite element. Includes Test Report ancd Certificate of Conformance. | 1 | |
AFS-1313 | SONAXIS CUSTOM 45°, 8MHZ PIEZOCOMPOSITE TRANSDUCER WITH PIVOTING HANDLE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
AFS-1317 | 8MHZ 40° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1318 | 8MHZ 45° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1318-D | 8MHz 45° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. STAINLESS STEEL HOUSING, CASE SIZE: 10mm x 6mm x15mm. TOP and SIDE MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1319 | 8MHZ 50° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1320 | 8MHZ 55° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1321 | 8MHZ 60° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. STAINLESS STEEL HOUSING, CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1321D | 8MHz 60° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. STAINLESS STEEL HOUSING, CASE SIZE: 10mm x 6mm x15mm. TOP and SIDE MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1322 | 8MHZ 65° ANGLE BEAM TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1322LP | 5MHZ 65° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .400" x .250" x .630". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1323 | 8MHZ 70° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
AFS-1324 | 8MHZ 75° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1324LP | 5MHz or 8MHz 75° TRANSVERSE BEAM TRANSDUCER IN STEEL WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .400" x .250" x .630". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-139270RM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 3.5MHz PIEZOCOMPOSITE ELEMENT. SIDE MOUNTED MICRODOT CONNECTOR CASE SIZE: .25" L x .325"W x .500" H, 1/4" ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-139270SM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 3.5MHz PIEZOCOMPOSITE ELEMENT. TOP MOUNTED MICRODOT CONNECTOR CASE SIZE: .25" L x .325"W x .500" H, 1/4" ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-139370RM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 2.25MHz PIEZOCOMPOSITE ELEMENT. SIDE MOUNTED MICRODOT CONNECTOR CASE SIZE: .75 " L x .500"W x .625" H, 3/8" ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-139370SM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 2.25MHz PIEZOCOMPOSITE ELEMENT. TOP MOUNTED MICRODOT CONNECTOR CASE SIZE: .75 " L x .500"W x .625" H, 3/8" ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1410CS | 30° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER, COMPOSITE ELEMENT BROADBAND WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1411CS | 45° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER COMPOSITE ELEMENT BROADBAND WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1412CS | 60° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER COMPOSITE ELEMENT BROADBAND WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-C670AT | COMPOSITE ELEMENT 6MHZ, 70° AL, ..Case .25w x.40L x.43H..piezo size(.125x.190), SUB MINIATURE AGNLE BEAM 3X4MM CRYSTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-C670ST | 6MHz PIEZOCOMPOSITE ANGLE BEAM TRANSDUCER. 70deg IN STEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFXL-445AS | EXTRA LARGE 4MHz ANGLE BEAM TRANSDUCER 45 DEG WITH SIDE MOUNT CONNECTOR. COMPOSITE ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFXL-460AS | EXTRA LARGE 4MHz ANGLE BEAM TRANSDUCER 60 DEG WITH SIDE MOUNT CONNECTOR. COMPOSITE ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFXL-470AS | EXTRA LARGE 4MHz ANGLE BEAM TRANSDUCER 70 DEG WITH SIDE MOUNT CONNECTOR. COMPOSITE ELEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFXL-545SS | EXTRA LARGE 5MHz ANGLE BEAM TRANSDUCER 45 DEG IN STEEL WITH SIDE MOUNT CONNECTOR. PIEZOCOMPOSITE ELEMENT, 8x9mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-13535 | COMPOSITE SLEEVE INSTALLER | 3 | |
AGE13005 | COMPOSITE SLEEVE REMOVAUINSTALLATION KIT | 1 | |
AGE13532 | COMPOSITE SLEEVE PULLER | 1 | |
AGE13535 | COMPOSITE SLEEVE INSTALLER | 3 | |
AGE13597 | COMPOSITE SLEEVE REMOVER | 2 | |
AGE13600 | COMPOSITE SLEEVE INSTALLER | 2 | |
AM21749-1 | SET - COMPOSITE RIVETING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AMK-787AC-01 | 787 COMPOSITE STRUCTURE REPAIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AN8501 | COMPOSITE REPAIR KIT | 1 | |
ASTM-F15GS-01 | Composite Screw Driver Set | 1 | |
AT370 | 3/8IN COMPOSITE IMPACT WRENCH | 1 | |
AT570 | 1/2IN COMPOSITE IMPACT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT87B02320 | REPAIR KIT COMPOSITE | 1 | |
ATE2596-001 | TOOL-INSTALLATION, COMPOSITE SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATE2641-001 | TOOL-INSTALLATION,SEAL COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATE2729-001 | TOOL-INSTALLATION, COMPOSITE SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-#10 | Solid CARBIDE Brad Point Drill for Composites - #10 (.1935) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-#21 | Solid CARBIDE Brad Point Drill for Composites - #21 (.1590) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-#30 | Solid CARBIDE Brad Point Drill for Composites - #30 (.1285) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-#40 | Solid CARBIDE Brad Point Drill for Composites - #40 (.0980) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-1/4 | Solid CARBIDE Brad Point Drill for Composites - 1/4" (.2500) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-1/8 | Solid CARBIDE Brad Point Drill for Composites - 1/8" (.1250) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-3/16 | Solid CARBIDE Brad Point Drill for Composites - 3/16" (.1875) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-3/32 | Solid CARBIDE Brad Point Drill for Composites - 3/32" (.0938) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-3/8 | Solid CARBIDE Brad Point Drill for Composites - 3/8" (.3750) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-5/16 | Solid CARBIDE Brad Point Drill for Composites - 5/16" (.3125) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-5/32 | Solid CARBIDE Brad Point Drill for Composites - 5/32" (.1562) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-207-7/32 | Solid CARBIDE Brad Point Drill for Composites - 7/32" (.2188) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-8HTC-5 | Thread Clipper for Kevlar® & Composite Materials - MADE IN THE USA! | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-CTH8 | Composite Tap Hammer - Hard-to-Find Tool - We have them IN STOCK! | 1 | |
BAT-DAG093 | SOLID CARBIDE DAGGER DRILL 3/32" (.0938) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG098 | SOLID CARBIDE DAGGER DRILL #40 (.0980) -FOR COMPOSITE MATERIALS | 1 | |
BAT-DAG125 | SOLID CARBIDE DAGGER DRILL 1/8" (.1250) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG128 | SOLID CARBIDE DAGGER DRILL #30 (.1285) -For Composite Materials | 1 | |
BAT-DAG156 | SOLID CARBIDE DAGGER DRILL 5/32" (.1562) -For Composite Materials | 1 | |
BAT-DAG159 | SOLID CARBIDE DAGGER DRILL #21 (.1590) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG161 | SOLID CARBIDE DAGGER DRILL #20 (.1610) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG177 | SOLID CARBIDE DAGGER DRILL #16 (.1770) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG185 | SOLID CARBIDE DAGGER DRILL #13 (.1850) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG187 | SOLID CARBIDE DAGGER DRILL 3/16" (.1875) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG193 | SOLID CARBIDE DAGGER DRILL #10 (.1935) -For Composite Materials | 1 | |
BAT-DAG199 | SOLID CARBIDE DAGGER DRILL #8 (.1990) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG204 | SOLID CARBIDE DAGGER DRILL #6 (.2040) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG246 | SOLID CARBIDE DAGGER DRILL"D" (.2460) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG250 | SOLID CARBIDE DAGGER DRILL 1/4" (.2500) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG312 | SOLID CARBIDE DAGGER DRILL 5/16" (.3125) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DAG375 | SOLID CARBIDE DAGGER DRILL 3/8" (.3750) -For Composite Materials | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM10 | SOLID CARBIDE TAPERED DRILL-REAMER FOR COMPOSITES - | 1 | |
BAT-DRM11 | SOLID CARBIDE TAPERED DRILL-REAMER FOR COMPOSITES - #11 (.1910) | 1 | |
BAT-DRM13 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #13 (.1850) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM14 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 1/4" (.2500) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM18 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 1/8" (.1250) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM190 | SOLID CARBIDE Tapered Drill-Reamer for Composites - .1900 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM20 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #20 (.1610) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM21 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #21 (.1590) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM30 | SOLID CARBIDE TAPERED DRILL-REAMER FOR COMPOSITES - | 1 | |
BAT-DRM316 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 3/16" (.1875) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM332 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 3/32" (.0938) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM38 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 3/8" (.3750) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM40 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #40 (.0980) | 1 | |
BAT-DRM516 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 5/16" (.3125) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM532 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 5/32" (.1562) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM6 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #6 (.2040) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM7 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #7 (.2010) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM716 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 7/16" (.4375) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM732 | SOLID CARBIDE Tapered Drill-Reamer for Composites - 7/32" (.2188) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRM8 | SOLID CARBIDE Tapered Drill-Reamer for Composites - #8 (.1990) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRMD | SOLID CARBIDE Tapered Drill-Reamer for Composites - "D" (.2460) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-DRMH | SOLID CARBIDE Tapered Drill-Reamer for Composites - "H" (.2660) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-S2311 | 4" Diamond Coated Saw Blade with 3/8" Arbor Hole - For Composites | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BHC161023 | CompositeRepairHeatingBlanket A320RADOME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BM1000 | COMPOSITE TESTER BOND MASTER 1000 | 1 | |
BT-J-117 | Composite Jam Nut Socket | 1 | |
BT-J-120 | Composite Jam Nut Socket | 1 | |
BT-J-121 | Composite Jam Nut Socket | 1 | |
BT-J-122 | Composite Jam Nut Socket | 1 | |
BT-J-123 | Composite Jam Nut Socket | 1 | |
BT-J-124 | Composite Jam Nut Socket | 1 | |
BT-J-125 | Composite Jam Nut Socket | 1 | |
BT-J-126 | Composite Jam Nut Socket | 1 | |
BT-J-127 | Composite Jam Nut Socket | 1 | |
BT-J-128 | Composite Jam Nut Socket | 1 | |
BT-J-129 | Composite Jam Nut Socket | 1 | |
BT-J-130 | Composite Jam Nut Socket | 1 | |
BT-J-131 | COMPOSITE JAM NUT SOCKET | 1 | |
BT-J-132 | COMPOSITE JAM NUT SOCKET | 1 | |
BT-J-133 | COMPOSITE JAM NUT SOCKET | 1 | |
BT-J-134 | Composite Jam Nut Socket | 1 | |
BT-J-135 | Composite Jam Nut Socket | 1 | |
BT-J-136 | Composite Jam Nut Socket | 1 | |
BT-J-137 | Composite Jam Nut Socket | 1 | |
BT-J-138 | Composite Jam Nut Socket | 1 | |
BT-J-139 | Composite Jam Nut Socket | 1 | |
BT-J-140 | Composite Jam Nut Socket | 1 | |
BT-J-141 | Composite Jam Nut Socket | 1 | |
BT-J-142 | COMPOSITE JAM NUT SOCKET | 1 | |
BT-J-143 | Composite Jam Nut Socket | 1 | |
BT-J-144 | Composite Jam Nut Socket | 1 | |
BT-J-145 | Composite Jam Nut Socket | 1 | |
BT-J-146 | Composite Jam Nut Socket | 1 | |
BT-J-147 | Composite Jam Nut Socket | 1 | |
BT-J-148 | Composite Jam Nut Socket | 1 | |
BT-J-149 | Composite Jam Nut Socket | 1 | |
BT-J-150 | Composite Jam Nut Socket | 1 | |
BT-J-151 | Composite Jam Nut Socket | 1 | |
BT-J-152 | Composite Jam Nut Socket | 1 | |
BT-J-153 | Composite Jam Nut Socket | 1 | |
BT-J-154 | Composite Jam Nut Socket | 1 | |
BT-J-155 | Composite Jam Nut Socket | 1 | |
BT-J-156 | Composite Jam Nut Socket | 1 | |
BT-J-157 | Composite Jam Nut Socket | 1 | |
BT-J-158 | Composite Jam Nut Socket | 1 | |
BT-J-161 | Composite Jam Nut Socket | 1 | |
BT-J-162 | Composite Jam Nut Socket | 1 | |
BT-J-163 | Composite Jam Nut Socket | 1 | |
BT-J-164 | Composite Jam Nut Socket | 1 | |
BT-J-165 | Composite Jam Nut Socket | 1 | |
BT-J-166 | Composite Jam Nut Socket | 1 | |
BT-S-151J | JAM NUT SOCKET KIT - COMPOSITE | 1 | |
C12-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY CARBON FIBER, (DEL) INTERPLY DELAMANATIONS | 3 | |
C12-DEL-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (DEL) interply delamanations | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C12-DIS-3C1N | REFERENCE STANDARD COMPOSITE | 3 | |
C12-DIS-3C2N | COMPOSITE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C12-PCS-3C1N | REFERENCE STANDARD COMPOSITE | 3 | |
C12-PCS-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (PCS) potting and core splice | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C12-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY CARBON FIBER, (POT) SKIN TO POTTING DISBONDS | 3 | |
C12-POT-3C2N | Composite Standard, Boeing All PT 51-01-01, 12ply carbon fiber, (POT) skin to potting disbonds | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C24-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C24-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C24-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C24-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27003 | SLING EQUIP COMPOSITE RUDDER ONLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C55001-1 | SLING ELEVATOR, COMPOSITE ONLY, REM/FIT. | 15 | |
C59AHLP | UNIVERSAL PLIERS VDE 8 NON-CONDUCTIVE COMPOSITE LINEMANS PLIERS - SNAP-ON | 1 | |
CE9900082-101 | INFRARED THERMOGRAPHY INSPECTION FOR WATER INGRESS IN COMPOSITE SANDWICH COMPONENTS WITH CRFP SKINS - THERMOGRAPHIC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CE9900085-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CE9900430-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CFDS16B | COMPOSITE SO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CFDS22B | 3/8" DRIVE 12-POINT SAE 11/16" NON-CONDUCTIVE COMPOSITE SOCKET. | 1 | |
CFS949A | 3/8 DRIVE NON-CONDUCTIVE COMPOSITE RATCHET. | 2 | |
CFX6 | 3/8 " DRIVE 6" NON-CONDUCTIVE COMPOSITE EXTENSION. | 1 | |
CHRS-1-12 | COMPOSITE STANDARD, BOEING 767 PT1 51-01-01 PG14- R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CHRS-1-3 | Composite Standard Boeing 767 PT1 51-01-01 PG14 R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CHRS-1-6 | COMPOSITE STANDARD BOEING 767 PT1 51-01-01 PG14 R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CHRS-1-9 | COMPOSITE STANDARD, BOEING 767 PT1 51-01-01 PG 14 R&D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CNSGDF66 | COMPOSITE SD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CNSGDF66B | COMPOSITE SD | 1 | |
CNSGDF68 | SCREWDRIVER, FLAT TIP, NON-CONDUCTIVE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CNSGDP61 | COMPOSITE SD | 1 | |
CNSGDX60 | COMPOSITE SD | 2 | |
CO-1 | COMPOSITE PLATE | 1 | |
COMPOSITE STANDARD 1-10 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 1-10 PLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COMPOSITE STANDARD 11-20 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 11-20 PLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COMPOSITE STANDARD 21-30 PLIES | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 21-30 PLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CS-EF2-AG113 | COMPOSITE REPAIR CART Ver 2,0 | 1 | |
CSS949A | COMPOSITE RATCHET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DANBTJ143 | COMPOSITE JAM NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DANBTJ153 | COMPOSITE JAM NUT SOCKET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DCK20125 | DelayLine Composite 20Mhz MDOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DMC1358 | Composite Jam Nut Socket Kit | 1 | |
DMP0110 | STEP SANDING TOOL KIT - DARK MATTER COMPOSITES | 1 | |
DOLER CD4 | COMPOSITE DRIL (RECOULES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DOLPHICAM DC-CF08-EXPERT COMPOSITE INSPECTION SYSTEM | DOLPHICAM DC-CF08-EXPERT COMPOSITE INSPECTION SYSTEM - CARBON FIBRE INSPECTION SYSTEM, SUITABLE FOR CARBON FIBRE UP TO 8MM THICKNESS, AMPLITUDE AND TIME-OF-FLIGHT REPORTING, A-SCAN, B-SCAN & C-SCAN, INCLUDES TOUCHSCREEN LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Dolphicam DC-CF08-Expert Composite Inspection System | Dolphicam DC-CF08-Expert Composite Inspection System - Carbon Fibre Inspection System, Suitable for carbon fibre up to 8mm thickness, Amplitude and Time-of-flight reporting, A-Scan, B-Scan & C-Scan, Includes touchscreen laptop | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ET1170KC | CORDLESS DRILL KIT-3/8"_DRILLING OF COMPOSITE_35X34 CM_[ET1170KC] | 1 | |
EVT-GRL-07 | Composite 6 Step Wedge, BMS 8-276, 8, 16, 32, 64, 90 and 128 plies | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXH1000TH | 1/2IN COMPOSITE IMPACT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXH1300THA | 3/8IN DRIVE COMPOSITE IMPACT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXH1600THA | 3/4IN DRIVE COMPOSITE IMPACT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F12-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY | 1 | |
F12-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLASS, (DIS) SKIN TO CORE DISBONDS | 1 | |
F12-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLASS, (PCS) POTTING AND CORE SPLICE | 1 | |
F12-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 12PLY FIBERGLSS, (POT) SKIN TO POTTING DISBONDS | 1 | |
F24-DEL-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F24-DIS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F24-PCS-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F24-POT-3C1N | COMPOSITE STANDARD, BOEING ALL PT 51-01-01, 24PLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F2MA927506 | METALLIC HORIZONTAL STABILIZER PROTRACTOR (WITH LH SPRING-LOADED FAIRING INSTALLED) OR COMPOSITE HORIZONTAL STABILIZER PROTRACTOR (WITH LH SPRING-LOADED FAIRING INSTALLED) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F2MA927506A | HS PROTRACTOR WITH SPRING FAIRING COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F2MA927506A1 | COMPOSITE HST PROTACTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F4HB1000 | COMPOSITE REPAIR SYSTEM | 2 | |
F4HB1003 | HOT BOND COMPOSITE REPAIR SYSTEM | 1 | |
F4HB2001 | BOND COMPOSITE REPAIR SYSTEM DUAL ZONE | 1 | |
F4HB2003 | HOT BOND COMPOSITE REPAIR SYSTEM DUAL ZONE | 1 | |
F4HB2005 | HB-2 HOT BOND COMPOSITE REPAIR SYSTEM | 2 | |
FGFC927506 | COMPOSITE HORIZONTAL STABILIZER PROTACTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GE Roto Array Wheel Probe 5mHz (64 Element) | GE Roto Array Wheel Probe 5mHz (64 Element) - Phased array ultrasonic inspection providing A, B & C-scan images, Suitable for scanning composite and aluminium aerospace components | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GMIAT87B02-320 | LESLIE AT - WORKSHOP INNOVATIVE TOOLS FOR COMPOSITE REPAIR | 1 | |
GMIUSC87B0201 | VALISE CONTROLE ULTRASON POUR COMPOSITES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GMIWDO-6-100-200 | GMIWDO-6-100-200 CUTTING LAMINATE FOR COMPOSITE FIBERSOR EQUIVALENT | 1 | |
HB-1 | COMPOSITE REPAIR SYSTEM | 1 | |
HCS-8500 | Hot Bonder/Composite Repair Systems | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HCS1104-01 | HAMMER, TAP INSPECTION, COMPOSITE STRUCTURES | 3 | |
HCS2036- 05A | COMPOSITE REPAIR TOOL KIT | 3 | |
HCS2036-05 | COMPOSITE REPAIR TOOL KIT | 3 | |
HCS2036-05A | COMPOSITE REPAIR TOOL KIT | 3 | |
HCS2036-09 | UAV COMPOSITE REPAIR TOOL KIT | 1 | |
HCS2700-34-25 –1 | COMPOSITE MATERIAL FREEZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HCS2910 | COMPOSITE CURING OVENS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HCS9200A | Dual Zone Hot bonder Composite Bonding Repair System | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HCS9200B | Dual Zone Hot bonder/Composite repair | 5 | |
HCS9200B-V | HEATCON COMPOSITE SYSTEMS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HCS9200FL | Flightline Hot bonder Composite Bonding Repair System | 1 | |
HCS9200N | Dual Zone Hot bonder Composite Bonding | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS-8171 | FILM - BAGGING FOR COMPOSITE MANUFACTURING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IHT60K | SET, SCREWDRIVER, COMBINATION, NON- CONDUCTIVE COMPOSITE, 6 PCS. | 2 | |
IHTP31 | SCREWDRIVER, NON-CONDUCTIVE COMPOSITE PHILLIPS #1 | 1 | |
IHTP62 | SCREWDRIVER, NON-CONDUCTIVE COMPOSITE PHILLIPS #2 | 1 | |
IHTS37 | 7/32 FLAT COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IHTS38 | 1/4 FLAT COMPOSITE | 1 | |
IHTS610 | 5/16 FLAT COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IHTS912 | 3/8 FLAT COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IPBCR-1032 | COMPOSITE REPAIR KIT TOOL | 1 | |
IPBCR-1039 | COMPOSITE REPAIR KIT TOOL | 1 | |
IZ-5402 | LINING CUTTER FOR COMPOSITE PANELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K-3000 | COMPOSITE MATERIAL REPAIR TOOL KIT | 1 | |
KER1660CBBW | LEEK BLACK WASH COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KER1660CBSO | LEEK COMPOSITE BLADE W/SO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KER1812OLCB | DIVIDEND-OLIVE COMPOSITE BLADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KMC18AVTK | AIRCRAFT MAINTENANCE TOOL SET SUPPLIED IN FOAM INSERTS WITH ALL WEATHER COMPOSITE TOOL CHEST | 2 | |
MATULT183 | COMPOSITE CALIBRATION BLOCK | 2 | |
MBBGCFRPHC200 | COMPOSITE REF. BLOCK | 1 | |
MH75BFDN-5AA | Composite Lock Tool | 2 | |
MH75BFDN-6AA | Composite Lock Tool | 1 | |
MH75BFDN-7AA | COMPOSITE LOCK TOOL | 2 | |
MH75DN-10AA | COMPOSITE LOCK TOOL | 1 | |
MH75DN-8AA | COMPOSITE LOCK TOOL | 1 | |
MHC75BFDN-5AA | COMPOSITETOOL | 2 | |
MHC75BFDN-6AA | COMPOSITE LOCK TOOL | 1 | |
MHC75DN-10AA | COMPOSITE LOCK TOOL | 1 | |
MHC75DN-8AA | COMPOSITE LOCK TOOL | 1 | |
MN75DN-8AA | Composite Lock Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MODEL8008 | HOT BONDER, COMPOSITE REPAIR CONSOLE (ATACS 8008PXP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT KIT6 | COMPOSITE TEST SAMPLES | 1 | |
NDT-1038 | COMPOSITE REFERENCE | 3 | |
NDT1033-10 | COMPOSITE REFERENCE | 4 | |
NDT1046 | BOEING COMPOSITE STANDARD, 777 PT4 51-00-04:PG3 FIG1, 3PLY, 5" X 3" X1". INCLUDES C-SCAN AND CERTIFICATE OF CONFORMANCE. | 3 | |
NDT1046-10-20 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 10 PLY / 20 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1046-12-24 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 12 PLY / 24 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1046-20-31 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 20 PLY / 31 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1046-3-10 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 10 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1046-3-11 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 11 PLY. Includes C-Scan and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1046-3-5 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 5 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
NDT1046-3-7 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 7 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
NDT1046-3-9 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 9 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
NDT1046-3/11 MOD | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 3 PLY / 11 PLY. Includes C-Scan and Certificate of Conformance. | 1 | |
NDT1046-6-10 | BOEING COMPOSITE STANDARD, ALL PT9 51-00-01 PG. 6 FIGURE 1. 6 PLY / 10 PLY. INCLUDES C-SCAN AND CERTIFICATE OF CONFORMANCE. | 2 | |
NDT1106 | COMPOSITE REFERENCE STANDARD WITH CERTIFICATE. | 2 | |
NDT1106-1 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 With top plate thickness of .060", .080" .100".. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT4150 | BOEING 747 COMPOSITE REFERENCE STANDARD PART 4 57-22-01 FIGURE 2. Includes C-Scan Report and Certificate of Conformance. | 1 | |
NDT629 | BOEING COMPOSITE REFERENCE STANDARD 767 PT 4 57-40-01. AULUMINUM to ALUMINUM HONEYCOMB CORE. Includes C-Scan Report and Certificate of Conformance. 2 year Unconditional Warranty. | 2 | |
NDT702 | Composite Std, Boeing Std PART 4 51-00-08 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDTUT554001 | CUSTOM HAECO COMPOSITE LAMINATE STEP REFERENCE BLOCK, 1,5,9,12,13,17,18,24,25, & 30 PLYS. 1.5" x 1.5" Step Pad Size. Includes C-Scan Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NG9201-0T9701 | COMPOSITE REPAIR SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
POSITECTOR 200 | COATING GAGE COMPOSITE | 1 | |
Phoenix ISL Tracer Scanner | Phoenix ISL Tracer Scanner - Corrosion mapping or Composite inspection, Freehand scanning without constraints, Can be used with Omniscan SX or MX2, Optional hydroform cradle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RK3160 | MONOGRAM COMPOSITE FASTENER REMOVAL KITS 4920-01-3 | 2 | |
RRT093316 | ALPS COMPOSITE FAN CASE BUILD STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SC-CK10 | PROFESSIONAL 10 INCH CARBON FIBRE COMPOSITES SHEARS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGDMRC4-C6 | COMPOSITE SHANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPO-5629-H-R1 | FIXTURE, COMPOSITE INSPECTION INSTRUMENT BONDMASTER PROBE | 1 | |
SR5-240-10X35-E | EXTRA FLEXIBLE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR5-240-14X24-E | EXTRA FLEXIBLE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR5-240-18X10-E | EXTRA FLEXIBLE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR5-240-32X48-E | EXTRA FLEXIBLE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR5-240-35X15-E | EXTRA FLEXIBLE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR5-240-45X25-E | EXTRA FLEXIBLE COMPOSITE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST870-4 | COMPOSITE DISDON DEF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST8842 | TAPPER, SONIC TESTING, COMPOSITES | 7 | |
ST8842-1 | Composite tapper | 6 | |
ST8842HMT | TAPPER SONIC TESTING COMPOSITES(TAP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST8870 | COMPOSITE STD KIT, (CONTAINS 1 EA ST8870-1,-4,-7,-8,-9) | 1 | |
ST8870-1 | COMPOSITE DISDON DEF | 4 | |
ST8870-1-F | Composite Standard, Boeing All PT1 51-04-00:PG21 FIG7 *Fiberglass skin instead of carbon fiber* | 1 | |
ST8870-4 | COMPOSITE DISDON DEF | 4 | |
ST8870-4-F | Composite Standard, Boeing All PT1 51-04-00:PG20 FIG6, *Fiberglass skin instead of carbon fiber | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST8870-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE(1-10 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
ST8870-8 | REFERENCE STANDARD COMPOSITE | 4 | |
ST8870-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 21-30 PLY), PT 1 51-04-00, PAGE 19 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 3 | |
ST8870B-7 | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 1-10 PLIES | 3 | |
ST8870B-8 | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 11-20 PLIES | 3 | |
ST8870B-9 | COMPOSITE STANDARD, BOEING 737 PT1 51-04-00 FIG. 8 SHEET 2: BMS 8-79, TYPE1581, CL3 GR1, 21-30 PLIES | 3 | |
ST8870C-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
ST8870C-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
ST8870C-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
ST8871 | COMPOSITE 10 STEP WEDGE SOLID LAMINATE, 777 PT 4 5 | 4 | |
ST8871D | BOEING COMPOSITE STANDARD, 5-15-20 PLY, 737 PT4 78 | 4 | |
STS10A124 | SIOUX Panel/Trim Saw - MADE IN THE USA - Perfect for Fiberglas/Composites | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SWREF1 | COMPOSITE STANDARD (CALIBRATION) | 2 | |
TCF-252T | Contact Transducer, Fusion Series, 1 MHZ, .750" Composite Element, .312 case/smooth, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCF-253S-.25 | Contact Transducer, Fusion Series, 3.5MHZ, .25" Composite Element, .312 case/smooth, .25 TallSide Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCF-253T | Contact Transducer, Fusion Series, 3.5MHZ, .25" Composite Element, .312 case/smooth, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCF-253T-.25 | Contact Transducer, Fusion Series, 3.5MHZ, .25" Composite Element, .312 case/smooth, .25 Tall Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCF-255T | Contact Transducer, Fusion Series, 5 MHZ, .25" Composite Element, .312 case/smooth, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCF-503S | Contact Transducer, Fusion Series, 3.5MHZ, .500" Composite Element, Side Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCFS-255T | Contact Transducer, Fusion Series, 5 MHZ, .25" Composite Element, .375" OD, Top Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCSC-375 | Transducer, MSW Style Screw-in, 5MHz x .375" Element, Composite EL | 1 | |
TD2809-001 | TOOL-INSTALLATION, COMPOSITE SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEK-5149 | Transducer, Surface Wave in Metal, 5MHz, Rexolite Shoe, Hardwired, .125 Composite Element | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEK-SMWK70 | 6 MHZ 70 DEGREE ANGLE BEAM..BROADBAND TRANSDUCER CASE SIZE...275" X .275" X .630" , TOP..MOUNT MICRODOT CONNECTOR..COMPOSITE ELEMENT | 1 | |
TEK-SWREF1 | Composite Standard; R&D | 1 | |
U59077LQG34 | Straight Beam Probe (Composite crystal) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U67626LR8SW | Sub-miniature Angle Beam Probe Composite | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UL-1ZE | Purge Hot Bonder Composite Repair | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UL-1Ze | Pyrobond Z-Purge Hot bonder Composite Bonding Repair System | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WP2-PACK2 | WP2 COMPOSITE PACK | 1 | |
WTY533-3700T | COMPOSITE SCISSORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ZAVIA-5140 | COMPOSITE CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ZC12-DEL-3C1N | Composite Standard, Boeing All PT1 51-01-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
gtrcomposites | gtrcomposites | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.